Computer numerical controller machinist jobs in Highland, CA

Do you want to grow with us? At DXP we are passionate about what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to the highest quality of customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we will encourage and empower you to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be the best solution for the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more! ************************************* Summary The Manual Machinist will review samples, drawings or instructions to understand specifications of output, plan the sequence of necessary actions for the completion of a job, take measurements and mark material for cutting or shaping, select appropriate machines (e.g. lathes) and position or load material for a job and perform routine machine maintenance and repair minor damages. Responsibilities of the Manual Machinist include, but are not limited to: Review samples, drawings or instructions to understand specifications of output Plan the sequence of necessary actions for the completion of a job Take measurements and mark material for cutting or shaping Select appropriate machines (e.g. lathes) and position or load material for a job Determine and program size of batches, speed of machine etc. Monitor machine while working to adjust the feed, maintain temperature and identify issues Check output to ensure consistency with specifications and discard defects Keep records of approved and defective units or final products Perform routine machine maintenance and repair minor damages Qualifications of the ManualMachinist include, but are not limited to: Proven experience as machinist Experience in using and/or programming manual, semi-automated or automated tools and machines (lathes, grinders etc.) Ability to use precision tools (e.g. calipers) to take accurate measurements Knowledge of the properties of metal and other material Ability to read blueprints, schematics and manuals Good at math with analytical abilities Physical stamina and strength to lift heavy items Acceptable driving record, according to company guidelines. High school diploma or equivalent; completion of vocational training or an apprenticeship will be an asset #zrjj Additional Information Physical Demand: Must be able to lift up to 50 lbs. unassisted. Pay: $25 - $55 DOE Working Conditions: Shop Environment Training/Certifications: N/A Shift Time/Overtime: Day Shift 6 am to 6 pm Travel: N/A Education: HS Diploma or GED DXP is always looking for individuals who want to join a team of employees who have the desire to achieve remarkable accomplishments together. The culture of the organization is supportive and goal oriented with high expectations, yet it is an environment where the team spirit inspires everyone to do their best. All DXP employees play a vital part in the organization and are treated with respect. By applying to DXP, you will have the opportunity to speak with some of the most respected professionals in the industry. DXP offers a comprehensive benefits package including: Medical, Dental, Vision, Flexible Spending, 401(k), paid holidays, Life and Disability Insurance, and additional supplemental products. Minimum Required Salary and benefits commensurate with experience. We are an equal opportunity employer. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. EOE/M/F/D/V

Job Description We are seeking an experienced 5 axis CNC Machinist, 2nd Shift for our Santa Ana, CA location. Operate the CNC machine in the most efficient manner possible by assuring that material, tooling, cutters, NC Programs and equipment are ready for use. Coordinate product flow with Management to support Customer demand. Work with NC Programmers to coordinate set-ups and manufacture of product. The CNC machinist must be able to explain the respective role within the QMS and how their role contributes to quality. The CNC machinist shall contribute to product conformity as apart to their daily job function and shall contribute to product safety. KARMAN SPACE & DEFENSE: Karman is the market leading suppliers of metallic and composite flight hardware and sub-assemblies for the space, missile, and hypersonic markets. Karman offers an unprecedented capability set to customers, creating a supply chain solution in a historically fragmented supply base. The Karman team draws on in-house expertise in engineering & design, precision machining, large part forming, welding, heat age, finishing, assembly, ablative & insulative composites, and other capabilities to serve as a strategic partner to customers. Karman is headquartered in greater Los Angeles and currently has 5 locations in Southern California and 1 location in Mukilteo, Washington. Location: Santa Ana, CA Compensation & Benefits: Medical, Dental, Vision Company Paid Life Insurance 401(k) Retirement Savings Plan Paid Time Off (PTO) Paid Holidays Tuition Reimbursement* RESPONSIBILITY & AUTHORITY: Maintain and Realize AS 9100 procedures and continuous improvement efforts. Maintain a clean and organized work environment. Keep the CNC clean and general maintenance up to date. Keep machine fixtures clean and stored properly. Work with Management to prioritize machine schedule. Work with programmers in order to minimize set-up and manufacture time. Order cutters and tooling as required to support manufacturing. Operate the CNC. Report to Management recommendations and / or concerns that will affect quality or time management. Must understand how customer products are impacted in the event of failure. Any other duties as required. KNOWLEDGE AND SKILL REQUIREMENTS: Must be detail oriented, extremely organized, have excellent communication skills and be able to interact well with all levels of Management. Must have experience with Siemens 840D and Fanuc 31i - B5 Controls. Must have excellent blueprint interpretation skills. Must have thorough understanding of machine set-ups, tooling, and cutters. Must have direct communication with internal customers. Must be trained of applicable changes & customer requirements. Must know the QMS basic system of reporting, record keeping and follow instructions. EDUCATION AND/OR EXPERIENCE: High school graduate or equivalent work experience. Adequate years of operating CNC equipment determined by Karman. PHYSICAL REQUIREMENTS: Constant standing/walking/sitting for at least 8 hours. Occasional pushing, pulling, lifting, or carrying up to 50 lbs, minimum 35 lbs. Sufficient hand, arm, and finger dexterity to operate a computer keyboard and other office equipment. Clarity of vision at approximately 20 inches or less. Corrective lenses may be worn to fulfill requirement. Prolonged periods of repetitive movement are required. Constant holding, grasping, turning, or otherwise working with the hand(s). Occasional extending of arms to reach overhead, at shoulder level and below shoulder level. WORK ENVIRONMENT: This position operates in a warehouse/shop/manufacturing environment. As a federal contractor, Karman Space & Defense is committed to compliance with all federal employment eligibility requirements. We participate in E-Verify, a web-based system that allows enrolled employers to confirm the eligibility of their employees to work in the United States. As an E-Verify employer, federal compliance mandates that we require documentation to verify your identity and employment authorization upon hire. ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. 1st Shift | Monday - Friday 6:00 AM - 4:45 PM

CNC Setup Machinist (Mills Only) 3, 4 & 5-Axis | Aerospace Manufacturing 2nd Shift | Temp-to-Hire | Riverside, CA We are seeking a high-level CNC Setup Machinist with full setup capability and a minimum of 5 years of hands-on experience on 3, 4, and 5-axis CNC mills. This is a 2nd shift, temp-to-hire opportunity in a fast-paced aerospace manufacturing environment. This role is ideal for a skilled setup machinist who takes pride in precision, owns their setups from start to finish, and is ready to step into a shop where 5-axis machining is becoming the main platform. What You Will Be Doing Perform complete machine setups including tools, offsets, fixtures, and verification Set up and operate 3-axis, 4-axis, and 5-axis CNC milling machines Conduct first article and in-process inspections Perform tool changes, offsets, and machining adjustments Read and interpret blueprints, routers, setup sheets, and work instructions Perform edge-breaking and deburring for safe handling Maintain consistent quality, documentation, and engineering standards Communicate all machining issues, discrepancies, and improvement ideas Maintain clean, organized, and safe work areas Follow all company procedures, safety policies, and attendance requirements Required Skills & Experience (Non-Negotiable) Minimum 5 years of CNC setup experience Must have full setup capability with all tools Strong 4-axis and 5-axis CNC milling experience Experience with Haas machines and Fanuc controls required Aerospace manufacturing experience required Strong blueprint reading and GD&T knowledge Skilled with precision measuring instruments Ability to work independently and within a team environment Must be comfortable working 2nd shift #Arrow

COME JOIN OUR TEAM! Without the strength of our Machine Shop team, we would not be able to offer the industry-leading service we're known for. We're seeking an experienced CNC Machinist Professional. The ideal candidate will have proven industry experience as a CNC Machinist. As a strong communicator and skilled hands-on CNC Machinist, you will operate the CNC machine in the most efficient manner possible by assuring that material, tooling, cutters, NC Programs and equipment are ready for use. Coordinate product flow with Management to support Customer demand. Work with NC Programmers to coordinate set-ups and manufacture of product. The CNC machinist must be able to explain the respective role within the QMS and how their role contributes to quality. The CNC machinist shall contribute to product conformity as apart to their daily job function and shall contribute to product safety. The CNC machinist shall also be aware of ethical behavior and conduct themselves accordingly to Karman policies and procedures. KARMAN SPACE & DEFENSE: Karman is the market leading suppliers of metallic and composite flight hardware and sub-assemblies for the space, missile, and hypersonic markets. Karman offers an unprecedented capability set to customers, creating a supply chain solution in a historically fragmented supply base. The Karman team draws on in-house expertise in engineering & design, precision machining, large part forming, welding, heat age, finishing, assembly, ablative & insulative composites, and other capabilities to serve as a strategic partner to customers. Karman is headquartered in greater Los Angeles and currently has 5 locations in Southern California, 1 location in Mukilteo, Washington and 1 location in Wilsonville, Oregon. Equal Opportunity Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment. DUTIES/RESPONSIBILITIES: Maintain and Realize AS 9100 procedures and continuous improvement efforts. Maintain a clean and organized work environment. Keep the CNC clean and general maintenance up to date. Keep machine fixtures clean and stored properly. Work with Management to prioritize machine schedule. Work with programmers in order to minimize set-up and manufacture time. Order cutters and tooling as required to support manufacturing. Operate the CNC. Report to Management recommendations and / or concerns that will affect quality or time management. Must understand how customer products are impacted in the event of failure. Any other duties as required. KNOWLEDGE AND SKILL REQUIREMENTS: Must be detail oriented, extremely organized, have excellent communication skills and be able to interact well with all levels of Management. Must have excellent blueprint interpretation skills. Must have thorough understanding of machine set-ups, tooling, and cutters. Must have direct communication with internal customers. Must be trained of applicable changes & customer requirements. Must know the QMS basic system of reporting, record keeping and follow instructions. EDUCATION AND/OR EXPERIENCE: High school graduate or equivalent work experience. Adequate years of operating CNC equipment determined by Karman. PHYSICAL REQUIREMENTS: Constant standing/walking/sitting for at least 8 hours. Occasional pushing, pulling, lifting, or carrying up to 50 lbs, minimum 35 lbs. Sufficient hand, arm, and finger dexterity to operate a computer keyboard and other office equipment. Clarity of vision at approximately 20 inches or less. Corrective lenses may be worn to fulfill requirement. Prolonged periods of repetitive movement are required. Constant holding, grasping, turning, or otherwise working with the hand(s). Occasional extending of arms to reach overhead, at shoulder level and below shoulder level. WORK ENVIRONMENT: This position operates in a warehouse/shop/manufacturing environment. TRAVEL REQUIREMENTS:

Career Opportunity - Day and Night Shift Machinists - Acromil LLC - Corona, CA Our Company Using state-of-the-art technology, Acromil, LLC in City of Industry, CA has been a primary supplier to the Commercial and Defense Aerospace Industries of complex structural components and assemblies since 1959. Acromil pursues its vision of excellence by providing the highest quality products, on time and at competitive prices within a culture of integrity and pride. This vision lead us to the acquisition of a similar business operation located in Corona, CA in September, 2018 for a total footprint of 200,000 square feet. Acromil's increased capacity will further our goal of being a World Class Supplier. Our Opportunity We have two positions available. One Day Shift (6:00 am - 2:30pm) and One Night Shift (6:00pm - 2:30am). The selected individual will independently set-up and operate CNC Machines according to job and program specifications while ensuring that quality, dimensions, and key characteristics are maintained. Must have knowledge of CNC's, single and Multi-Spindle machine tools such as: ESSENTIAL DUTIES: Handtmann HBZ Trunnion 120, Handtmann HBZ CC 400, Handtmann PBZ HD 600 SNK High Speed Tilt Table UHP-120B,SNK High Speed Horizontal Tilt Table HPS-4B,SNK RB-200F,SNK Vertical Cincinnati 3 spindle gantries, Cincinnati high speed 3 spindle gantries, Cincinnati Vertical Mills OKK Horizontal mills, OKK High Speed vertical mills 3 axis, 4 axis and 5 axis machines, using Fanuc, Siemens 840D, and Cincinnati 950 controllers. QUALIFICATIONS: Qualified individuals will have 5 years related work experience in an Aerospace Manufacturing environment and familiar with our machine line. Must be able to stand for 8 hours in a day/night, lift/carry up to 50 pounds, keen eye-hand coordination, able to be trained and certified as a Forklift & Crane Operator. Person must be an United States (US) Person as defined by ITAR Regulations - A United States (US) Person is a citizen of the United States, a lawful permanent resident alien of the US, (a "Green Card" holder), a refugee or someone in the USA as a protected political asylee or under amnesty. EDUCATION/EXPERIENCE: High School Diploma or GED required. Requires 5+ years working in a manufacturing environment with duties similar to those listed above. LANGUAGE SKILLS: Ability to read and interpret documents such as operating procedures and general instructions, machine manuals, employee handbook, company policies and departmental procedures, etc. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. The employee is frequently exposed to vibration. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. PHYSICAL DEMANDS : The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel and talk or hear. The employee is frequently required to sit; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee is occasionally required to climb or balance. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Receipt of this does not imply nor create a promise of employment, nor an employment contract, or in any way change my at-will employment status. This job description is representative of the duties and responsibilities of the position but may not be inclusive of every aspect of the position. Benefits We offer Medical, Dental, Vision, Life Insurance and a 401(k) plan with Employer's match, safety incentives and an employee referral bonus program. We also provide paid holidays, vacation and sick days. EEO We are proud to be an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation.

Overall Purpose: The Sr. CNC Machinist produces machined parts by programming, setting up, and operating a CNC machine while adhering to quality and safety standards. Essential Duties & Responsibilities: Set up and program CNC machines Make tooling and fixtures as required Perform file maintenance Perform First Article Inspection, including molds and segment inspection as required Enter SPC jobs into the computer Collect SPC data on the computer Print and close out jobs Send and retrieve programs from the main computer Complete daily paperwork Perform set-up with tools provided Perform complete inspection of parts Properly complete dimensional inspection reports Properly operate CNC machine to ensure productivity standards are met Read blue prints Properly document labor report, job travelers and other daily reports in a timely manner Crosstrain in other areas as needed Clean work areas Follow both verbal and written instructions Adhere to 5S Standards Adhere to all company policies and procedures, including, but not limited to, policies for attendance and punctuality and standards for safety Qualification Requirements: High School education or equivalent Must possess basic computer skills Minimum 5 years of CNC experience Must be capable of programming using Master Cam Mill /Okuma Lathe Must be familiar with Okuma lathes, HAAS milling machines and Daewoo/Fanuc Control Must be capable of performing duties and responsibilities with minimum supervision Able to read and understand blue prints Knowledge of basic measuring tools, calipers, micrometers, comparators and math required Fluent in English (able to read, speak, write and understand) Must be a US Person (US Citizen or Permanent Resident) Physical Demands: While performing duties of the job, the employee is required to: Regularly stand, walk, and reach with both hands and arms Perform repetitive motions Regularly lift 10+ pounds Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception and the ability to adjust focus

Job Description RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense, and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace, and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion. Essential Functions of the Job: Set up and operate CNC machines (lathe/mill) in order to meet daily production and quality requirements. Follow company quality control standards to include in-process inspection and documentation. Must model safe behaviors. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Education: High school diploma or General Education Degree (GED) required. Experience: Must have at least five years of current CNC lathe setup experience. Formal CNC training experience preferred. Knowledge/Skills/Abilities: Ability to interpret blueprints, setup machines, edit offsets within programs, and perform tool offset adjustments as required to machine specialty bearings. Ability to perform routine maintenance and troubleshooting on machines. Skilled to perform inspections of dimensions machined, including threads, inner diameters, outer diameters, lengths, widths, and undercuts/grooves. Skilled to inspect finished parts using precision measuring tools (calipers, micrometers, etc.). Ability to read and interpret engineering prints. Ability to make decisions, communicate effectively, and work well with others in a team environment. Must be a quick learner. Ability to give, receive, and follow written and verbal instructions in English and communicate job related information to others. Physical & Environmental Factors: While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas. The employee is occasionally exposed to moving mechanical parts, fumes, or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate or loud. The employee is regularly required to sit and talk or to hear. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a U.S. citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status. **Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $19 to 22/hour. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #25.1-1

Individuals assigned to the Machine Shop shall be able to use blueprints, drawings, sketches, or computer-aided design (CAD) and manufacturing files to program by using computer software such as Mastercam CAD/CAM, SolidWorks, and/or Fusion 360 for the Computerized Numerical Control machines and operate CNC machines to produce precision metal or plastic parts. Must also set up different types of equipment that are controlled by computers to accomplish goals with accuracy while maintaining high level of production rates. Operating the conventional milling machines, lathes, drill presses, and band saws as required to manufacture new products and/or repair or rework parts in accordance with engineering instructions and drawings. Basic Qualifications : Service Orientation: Passionate, effective demeanor in interactions with Guests and Cast Members Receptive to special requests Committed and reliable (reports for scheduled shifts) Encouraging of other Cast Members working on your team Detail oriented Ability to complete repetitious tasks while maintaining quality Ability to address and build appropriate solutions Interpersonal Skills and Abilities: Excellent written and verbal communication skills Capable of easily explaining sophisticated issues and procedures to others Excellent computer skills using MS Office or similar programs Additional Information : SUBMITTING YOUR APPLICATION After clicking “Apply for this job” below, the employment application will open in a new window. Please complete ALL pages of the application by clicking “Next” on each page, then “Submit” on the final page. SCHEDULE AVAILABILITY Shifts are typically at night, and individuals must have availability to work Sunday through Saturday, any shift (1st, 2nd, and 3rd shift) including holidays, and must be open to any days off. KEYWORD: DLR Casting, dlrcasting, Disneyland Resort Casting Hourly Jobs , DLRResortRoles, DLR Resort Roles, CNC, Milling, Machine, Programming The pay rate for this role in California is $41.11 to $50.05 per hour, which follows the pay scale agreed upon in the Collective Bargaining Agreement. The base pay actually offered may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience, among other factors. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ****************************************

RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense, and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace, and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion. Essential Functions of the Job: Set up and operate Speed Lathes, Hone, and occasionally CNC lathes in order to meet daily production and quality requirements. Follow company quality control standards to include in-process inspection and documentation. Must model safe behaviors. Must have evening availability for 2 nd Shift from 3:30pm until 12:00am. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Education: High school diploma or General Education Degree (GED) required. Experience: Must have at least two years of current CNC lathe setup experience. Formal CNC training experience preferred. Knowledge/Skills/Abilities: Ability to interpret blueprints, setup machines, edit offsets within programs, and perform tool offset adjustments as required to machine specialty bearings. Ability to perform inspections of dimensions machined, including threads, inner diameters, outer diameters, lengths, widths, and undercuts/grooves. Ability to read and interpret engineering prints. Ability to make decisions, communicate effectively, and work well with others in a team environment. Must be a quick learner. Ability to give, receive, and follow written and verbal instructions in English and communicate job related information to others. Physical & Environmental Factors: While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas. The employee is occasionally exposed to moving mechanical parts, fumes, or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate or loud. The employee is regularly required to sit and talk or to hear. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a U.S. citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status. **Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $20 to 25/hour. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #25.2-1/2

Your tasks * Perform complex CNC setups on all machines (CNC Swiss Turn/Lathe/Mill) and (Heidenhain/Fanuc/Haas Controller) * Create CNC programs using MasterCAM, Esprit, or Equiv. for various CNC machine types, including creating setup sheets * Able to fully train Level I & Level II, and new operators to run and setup CNC machines. * Design, program, and machine any work holding fixtures, make manual edits to G and M codes, trouble shoot code for issues Your profile * Certificate of completion in operation of machine shop equipment and measuring tools or recent two years' experience as a machine shop operator level 3. * Strong computer skills as CNC Operators use computer software to control machinery * Strong math skills for inputting specific dimensions and figures into the CNC machinery: GD&T (Geometrics, Dimensioning, and Tolerances). Benefits Clear vision and purpose "We are a sustainability and innovation leader providing superior customer value" is our vision and this is what guides us. Our purpose "becoming better every day - since 1802" is what inspires us in our daily work. Sustainability and innovation focus We have high sustainability and innovation goals. Let's work towards a sustainable future together. Excellent learning tools At GF we provide development opportunities for everyone. We offer global learning tools as well as trainings and specialized courses. Great career opportunities GF as a global acting company provides many opportunities regarding career growth. We also offer a dedicated talent management process (MyNextBigStep@GF) to boost your career. Health care GF offers a comprehensive health and welfare benefits plan including, medical, dental, vision, life insurance, short- and long-term disability, and 401k with generous company match. Paid holidays Paid time off include 12 paid days of company holidays. Work perks discount The discount program includes many different goods and services including appliances, electronics, theme parks, movies and more. Sport activities We support the purchase of a fitness membership from the center of your choice with a subsidy. Your contact Veronica Ortiz 47 Human Resources Generalist Web E-Mail 5462 No. Irwindale Avenue 91706 Irwindale, CA United States View larger map Your work route Apply now Who we are GF Piping Systems is the world's leading supplier of piping systems. We enable the safe and sustainable transport of fluids. Our business is driven by industry-leading sustainability levels, innovation through digital solutions and investment in a culture based on performance, learning and caring.

A Vertical machinist plays a crucial role in the manufacturing aspect of the organization. Primary responsibility is to produce components to specification that will ultimately support the assembly of aerospace latches to be delivered to customers. ESSENTIAL DUTIES - other duties may be assigned Sets Up and Operates Vertical Milling machine(s) 3 to 4 axes in a production environment to produce parts in accordance with specifications given by blueprints, dimensional data sheets, and work order package. Checks daily schedule (Dispatch List) to ensure what job(s) need to run for the day. Checks, maintains, lubricates, and degreases production machines and equipment Starts set-ups and adjusts tooling according to CNC program to meet specifications required. Loads parts for machining and performs periodic quality checks for conformance to specifications and planning documents. Checks and inspects own parts for quality ensuring parts meet correct specifications in accordance with blueprints and data dimensional sheets. Works under limited supervision. EDUCATION AND/OR EXPERIENCE REQUIRED High school diploma or General Educational Development (GED) equivalent; and Requires 3 to 6 years on-the-job machine shop experience; and/or Equivalent combination of education and experience. OTHER SKILLS AND ABILITIES Must be able to read and interpret blueprints. Must be able to use basic measuring instruments. (Micrometers, Calipers, Height Gauges, etc.) Programming knowledge preferred but not required. To conform to U.S. export control regulations, applicant should be eligible for any required authorizations from the U.S. Government. Proficient in spoken and written English WORKING CONDITIONS AND PHYSICAL REQUIREMENTS Works in a factory environment and is exposed to dirt, heat, grit, sparks, noise, fumes, and dust. Requires close hand/eye coordination, high manual dexterity. Duties and responsibilities require special physical requirements including standing, walking, bending over, crouching, pushing, pulling, repetitive foot control, repetitive use of hands, grasping, fine dexterity, and occasional lifting of material up to 50 pounds. Schedule: 3:30PM-11:30PM ( Opportunity for Over Time)

The Division Manager of Stamping and CNC Turret Punch Press leads the promotion and sales of advanced stamping presses and turret punch presses for Amada America, Inc. This role involves developing strategic sales plans, expanding market share, planning production requirements, and supporting the entire sales group. The ideal candidate is a results-oriented leader with deep knowledge of metal forming technologies, proven sales expertise, and the ability to navigate complex B2B sales cycles. The Division Manager will focus on expanding market share, optimizing sales processes, developing educational and promotional material, training the sales force, and achieving annual sales targets through innovative strategies and strong team performance. ESSENTIAL FUNCTIONS Develop and execute comprehensive sales strategies for stamping presses and turret punch presses, including market analysis, pricing models, and competitive positioning to achieve or exceed quarterly and annual sales goals. Lead, mentor, and develop all Amada sales representatives, providing training on product features, technical specifications, and sales techniques to improve performance and individual quotas. Help to build and maintain key relationships with prospective and existing clients, conducting needs assessments, product demonstrations, and negotiations to secure sales contracts and long-term partnerships. Collaborate with marketing, product development, and engineering teams to align sales efforts with existing and with new product launches, custom solutions, and industry trends in metal stamping and punching technologies. Monitor sales metrics, pipeline health, and customer feedback using INFOR CRM tools to forecast and identify opportunities, and implement corrective actions for underperforming areas. Analyze market trends, competitor activities, and customer requirements to recommend product enhancements or expansions, ensuring the division remains competitive in the industrial machinery sector. Manage the division's budget, including sales incentives, travel expenses, and trade show participation, while optimizing resource allocation for maximum ROI. Ensure compliance with industry regulations, safety standards, and company policies related to equipment sales, installations, and after-sales support. Conduct regular training and sales evaluations to identify and ensure appropriate sales progress, and foster a high-performance culture and drive motivation. Represent the company at industry events, trade shows, and client meetings to promote brand visibility and generate leads for stamping and turret punch press solutions. REQUIREMENTS Strong technical background and understanding of stamping and punching operations. Strong technical background and understanding of tooling required for these machines. Strong ability to communicate and train the Amada sales and appllications groups Excellent organizational skills. Excellent communication and interpersonal skills. Strong problem solving and critical thinking skills. REPORTING RELATIONSHIP Vice President of Products & Engineering SUBORDINATE STAFF None at this time KNOWLEDGE Education & Experience: Bachelor's degree in a related field or 10 years within the industrial machinery or manufacturing sector, with at least 5 years in a leadership role focused on stamping presses. And a minimum of some understanding of turret punch presses, or similar metal forming technologies. Technical Knowledge: In-depth understanding of stamping press with some understanding of turret punch press operations, including servo-driven, hydraulic, mechanical, and CNC systems, fabrication processes, and industry standards (e.g., ISO, OSHA). Sales Expertise: Proven track record of achieving multi-million-dollar revenue targets, managing complex sales cycles, and closing high-value contracts in competitive markets. Leadership Skills: Demonstrated ability to lead, mentor, and motivate sales teams, with experience in performance management, talent development, and fostering a results-driven culture. Strategic Acumen: Strong skills in market analysis, competitive intelligence, sales forecasting, and CRM systems (e.g., Infor, Salesforce, SAP); experience with pricing strategies and ROI optimization. Communication and Relationship Building: Exceptional interpersonal, negotiation, and presentation skills; ability to engage with C-level executives, engineers, and procurement teams in manufacturing industries. Analytical Abilities: Proficiency in data-driven decision-making, using KPIs, sales analytics tools, and financial modeling to drive business growth. Travel and Other Requirements: Willingness to travel at least 50% for client meetings, trade shows, and team support; valid driver's license and passport required. Additional Competencies: Proficiency in Microsoft Office Suite and sales enablement software; knowledge of ERP systems and industry-specific software is a plus. MENTAL Ability to coordinate several priorities at one time. Ability to work harmoniously with others. Ability to accept and follow instructions. WORKING CONDITIONS LIFTING: Average Weight: 25 lb. Frequency: Daily

Job Title: CNC SET UP MACHINIST Department: MACHINE SHOP Reports To: MACHINE SHOP MANAGER FLSA Status: FULL TIME HOURLY CNC machinist must possess excellent attention to detail and will be responsible to follow out machining of parts in accordance with prints, and Company procedure requirements. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Create CNC/Lathe and Mill setup sheets · Able to setup/operate complex (+/-.010 or lower, TP · Perform complex Grind setup's. · Complex GD&T measurement using calipers, height gage, bore gages etc. · Advanced shop math · Advanced Blueprint reading · Understand Geometric Dimensioning and Tolerances. · Must own basic inspection equipment (0-6” Caliper). Competencies: To perform the job successfully, an individual should demonstrate the following. Communications - Exhibits good listening and comprehension. Expresses ideas and thoughts in written form. Expresses ideas and thoughts verbally. Keeps others adequately informed. Selects and uses appropriate communication methods. Customer Service - Displays courtesy and sensitivity. Manages difficult or emotional customer situations. Meets commitments. Responds promptly to customer needs. Solicits customer feedback to improve service. Dependability - Commits to doing the best job possible. Follows instruction. Keeps commitments. Meets attendance and punctuality guidelines. Responds to requests for service and assistance. Takes responsibility for own actions. Planning & Organization - Integrates changes smoothly. Plans for additional resources. Prioritizes and plans work activities. Sets goals and objectives. Uses time efficiently. Works in an organized manner. Quality - Fosters quality focus in others. Improves processes. Measures key outcomes. Sets clear quality requirements. Solicits and applies customer feedback. Use of Technology - Adapts to new technologies. Demonstrates required skills. Keeps technical skills up to date. Troubleshoots technological problems. Uses technology to increase productivity. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. 5 years related experience or training preferred. Language Ability: Read and comprehend simple instructions, short correspondence and memos. Write simple correspondence. Effectively present information in one-on-one and small group situations to customers, clients and other employees. Mathematical Ability: Calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference and volume. Apply concepts of basic algebra and geometry. Reasoning Ability: Apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Deal with problems involving a few concrete variables in standardized situations. Computer Skills: Basic Supervisory Responsibilities: None. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be comfortable working in a Manufacturing facility. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to lift up to 40 Lbs. Must be able to work in a standing position up to 8 hours per day. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Job Type: Full-time Pay: $25.00 - $35,0000 Hr Companies governed by ITAR (International Trade and Arms Regulations) reserve the right to background check/and random drug testing for all applicants

Job Description We are seeking an experienced 5 axis CNC Machinist, 2nd Shift for our Santa Ana, CA location. Operate the CNC machine in the most efficient manner possible by assuring that material, tooling, cutters, NC Programs and equipment are ready for use. Coordinate product flow with Management to support Customer demand. Work with NC Programmers to coordinate set-ups and manufacture of product. The CNC machinist must be able to explain the respective role within the QMS and how their role contributes to quality. The CNC machinist shall contribute to product conformity as apart to their daily job function and shall contribute to product safety. KARMAN SPACE & DEFENSE: Karman is the market leading suppliers of metallic and composite flight hardware and sub-assemblies for the space, missile, and hypersonic markets. Karman offers an unprecedented capability set to customers, creating a supply chain solution in a historically fragmented supply base. The Karman team draws on in-house expertise in engineering & design, precision machining, large part forming, welding, heat age, finishing, assembly, ablative & insulative composites, and other capabilities to serve as a strategic partner to customers. Karman is headquartered in greater Los Angeles and currently has 5 locations in Southern California and 1 location in Mukilteo, Washington. Location: Santa Ana, CA Compensation & Benefits: Medical, Dental, Vision Company Paid Life Insurance 401(k) Retirement Savings Plan Paid Time Off (PTO) Paid Holidays Tuition Reimbursement* RESPONSIBILITY & AUTHORITY: Maintain and Realize AS 9100 procedures and continuous improvement efforts. Maintain a clean and organized work environment. Keep the CNC clean and general maintenance up to date. Keep machine fixtures clean and stored properly. Work with Management to prioritize machine schedule. Work with programmers in order to minimize set-up and manufacture time. Order cutters and tooling as required to support manufacturing. Operate the CNC. Report to Management recommendations and / or concerns that will affect quality or time management. Must understand how customer products are impacted in the event of failure. Any other duties as required. KNOWLEDGE AND SKILL REQUIREMENTS: Must be detail oriented, extremely organized, have excellent communication skills and be able to interact well with all levels of Management. Must have experience with Siemens 840D and Fanuc 31i - B5 Controls. Must have excellent blueprint interpretation skills. Must have thorough understanding of machine set-ups, tooling, and cutters. Must have direct communication with internal customers. Must be trained of applicable changes & customer requirements. Must know the QMS basic system of reporting, record keeping and follow instructions. EDUCATION AND/OR EXPERIENCE: High school graduate or equivalent work experience. Adequate years of operating CNC equipment determined by Karman. PHYSICAL REQUIREMENTS: Constant standing/walking/sitting for at least 8 hours. Occasional pushing, pulling, lifting, or carrying up to 50 lbs, minimum 35 lbs. Sufficient hand, arm, and finger dexterity to operate a computer keyboard and other office equipment. Clarity of vision at approximately 20 inches or less. Corrective lenses may be worn to fulfill requirement. Prolonged periods of repetitive movement are required. Constant holding, grasping, turning, or otherwise working with the hand(s). Occasional extending of arms to reach overhead, at shoulder level and below shoulder level. WORK ENVIRONMENT: This position operates in a warehouse/shop/manufacturing environment. As a federal contractor, Karman Space & Defense is committed to compliance with all federal employment eligibility requirements. We participate in E-Verify, a web-based system that allows enrolled employers to confirm the eligibility of their employees to work in the United States. As an E-Verify employer, federal compliance mandates that we require documentation to verify your identity and employment authorization upon hire. ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. 2nd Shift | Monday - Friday 4:00 PM - 12:45 AM

Career Opportunity - Day and Night Shift Machinists - Acromil LLC - Corona, CA Our Company Using state-of-the-art technology, Acromil, LLC in City of Industry, CA has been a primary supplier to the Commercial and Defense Aerospace Industries of complex structural components and assemblies since 1959. Acromil pursues its vision of excellence by providing the highest quality products, on time and at competitive prices within a culture of integrity and pride. This vision lead us to the acquisition of a similar business operation located in Corona, CA in September, 2018 for a total footprint of 200,000 square feet. Acromil's increased capacity will further our goal of being a World Class Supplier. Our Opportunity We have two positions available. One Day Shift (6:00 am - 2:30pm) and One Night Shift (6:00pm - 2:30am). The selected individual will independently set-up and operate CNC Machines according to job and program specifications while ensuring that quality, dimensions, and key characteristics are maintained. Must have knowledge of CNC's, single and Multi-Spindle machine tools such as: ESSENTIAL DUTIES: Handtmann HBZ Trunnion 120, Handtmann HBZ CC 400, Handtmann PBZ HD 600 SNK High Speed Tilt Table UHP-120B,SNK High Speed Horizontal Tilt Table HPS-4B,SNK RB-200F,SNK Vertical Cincinnati 3 spindle gantries, Cincinnati high speed 3 spindle gantries, Cincinnati Vertical Mills OKK Horizontal mills, OKK High Speed vertical mills 3 axis, 4 axis and 5 axis machines, using Fanuc, Siemens 840D, and Cincinnati 950 controllers. QUALIFICATIONS: Qualified individuals will have 5 years related work experience in an Aerospace Manufacturing environment and familiar with our machine line. Must be able to stand for 8 hours in a day/night, lift/carry up to 50 pounds, keen eye-hand coordination, able to be trained and certified as a Forklift & Crane Operator. Person must be an United States (US) Person as defined by ITAR Regulations - A United States (US) Person is a citizen of the United States, a lawful permanent resident alien of the US, (a "Green Card" holder), a refugee or someone in the USA as a protected political asylee or under amnesty. EDUCATION/EXPERIENCE: High School Diploma or GED required. Requires 5+ years working in a manufacturing environment with duties similar to those listed above. LANGUAGE SKILLS: Ability to read and interpret documents such as operating procedures and general instructions, machine manuals, employee handbook, company policies and departmental procedures, etc. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. The employee is frequently exposed to vibration. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel and talk or hear. The employee is frequently required to sit; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee is occasionally required to climb or balance. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Receipt of this does not imply nor create a promise of employment, nor an employment contract, or in any way change my at-will employment status. This job description is representative of the duties and responsibilities of the position but may not be inclusive of every aspect of the position. Benefits We offer Medical, Dental, Vision, Life Insurance and a 401(k) plan with Employer's match, safety incentives and an employee referral bonus program. We also provide paid holidays, vacation and sick days. EEO We are proud to be an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation.

RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense, and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace, and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion. Essential Functions of the Job: Set up and operate CNC machines (lathe/mill) in order to meet daily production and quality requirements. Follow company quality control standards to include in-process inspection and documentation. Must model safe behaviors. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Education: High school diploma or General Education Degree (GED) required. Experience: Must have at least five years of current CNC lathe setup experience. Formal CNC training experience preferred. Knowledge/Skills/Abilities: Ability to interpret blueprints, setup machines, edit offsets within programs, and perform tool offset adjustments as required to machine specialty bearings. Ability to perform routine maintenance and troubleshooting on machines. Skilled to perform inspections of dimensions machined, including threads, inner diameters, outer diameters, lengths, widths, and undercuts/grooves. Skilled to inspect finished parts using precision measuring tools (calipers, micrometers, etc.). Ability to read and interpret engineering prints. Ability to make decisions, communicate effectively, and work well with others in a team environment. Must be a quick learner. Ability to give, receive, and follow written and verbal instructions in English and communicate job related information to others. Physical & Environmental Factors: While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas. The employee is occasionally exposed to moving mechanical parts, fumes, or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate or loud. The employee is regularly required to sit and talk or to hear. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a U.S. citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status. **Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $19 to 22/hour. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #25.1-1

Do you want to grow with us? At DXP we are passionate about what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to the highest quality of customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we will encourage and empower you to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be the best solution for the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more! ************************************* Summary: The Manual Machinist will review samples, drawings or instructions to understand specifications of output, plan the sequence of necessary actions for the completion of a job, take measurements and mark material for cutting or shaping, select appropriate machines (e.g. lathes) and position or load material for a job and perform routine machine maintenance and repair minor damages. Responsibilities of the Manual Machinist include, but are not limited to: * Review samples, drawings or instructions to understand specifications of output * Plan the sequence of necessary actions for the completion of a job * Take measurements and mark material for cutting or shaping * Select appropriate machines (e.g. lathes) and position or load material for a job * Determine and program size of batches, speed of machine etc. * Monitor machine while working to adjust the feed, maintain temperature and identify issues * Check output to ensure consistency with specifications and discard defects * Keep records of approved and defective units or final products * Perform routine machine maintenance and repair minor damages Qualifications of the Manual Machinist include, but are not limited to: * Proven experience as machinist * Experience in using and/or programming manual, semi-automated or automated tools and machines (lathes, grinders etc.) * Ability to use precision tools (e.g. calipers) to take accurate measurements * Knowledge of the properties of metal and other material * Ability to read blueprints, schematics and manuals * Good at math with analytical abilities * Physical stamina and strength to lift heavy items * Acceptable driving record, according to company guidelines. * High school diploma or equivalent; completion of vocational training or an apprenticeship will be an asset #LI-YJ1 #zrjj Additional Information: * Physical Demand: Must be able to lift up to 50 lbs. unassisted. * Pay: $25 - $55 DOE * Working Conditions: Shop Environment * Training/Certifications: N/A * Shift Time/Overtime: Day Shift 6 am to 6 pm * Travel: N/A * Education: HS Diploma or GED DXP is always looking for individuals who want to join a team of employees who have the desire to achieve remarkable accomplishments together. The culture of the organization is supportive and goal oriented with high expectations, yet it is an environment where the team spirit inspires everyone to do their best. All DXP employees play a vital part in the organization and are treated with respect. By applying to DXP, you will have the opportunity to speak with some of the most respected professionals in the industry. DXP offers a comprehensive benefits package including: Medical, Dental, Vision, Flexible Spending, 401(k), paid holidays, Life and Disability Insurance, and additional supplemental products. Minimum Required Salary and benefits commensurate with experience. We are an equal opportunity employer. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. EOE/M/F/D/V

Job Title: CNC SET UP MACHINIST Department: MACHINE SHOP Reports To: MACHINE SHOP MANAGER FLSA Status: FULL TIME HOURLY CNC machinist must possess excellent attention to detail and will be responsible to follow out machining of parts in accordance with prints, and Company procedure requirements. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Create CNC/Lathe and Mill setup sheets · Able to setup/operate complex (+/-.010 or lower, TP · Perform complex Grind setup's. · Complex GD&T measurement using calipers, height gage, bore gages etc. · Advanced shop math · Advanced Blueprint reading · Understand Geometric Dimensioning and Tolerances. · Must own basic inspection equipment (0-6” Caliper). Competencies: To perform the job successfully, an individual should demonstrate the following. Communications - Exhibits good listening and comprehension. Expresses ideas and thoughts in written form. Expresses ideas and thoughts verbally. Keeps others adequately informed. Selects and uses appropriate communication methods. Customer Service - Displays courtesy and sensitivity. Manages difficult or emotional customer situations. Meets commitments. Responds promptly to customer needs. Solicits customer feedback to improve service. Dependability - Commits to doing the best job possible. Follows instruction. Keeps commitments. Meets attendance and punctuality guidelines. Responds to requests for service and assistance. Takes responsibility for own actions. Planning & Organization - Integrates changes smoothly. Plans for additional resources. Prioritizes and plans work activities. Sets goals and objectives. Uses time efficiently. Works in an organized manner. Quality - Fosters quality focus in others. Improves processes. Measures key outcomes. Sets clear quality requirements. Solicits and applies customer feedback. Use of Technology - Adapts to new technologies. Demonstrates required skills. Keeps technical skills up to date. Troubleshoots technological problems. Uses technology to increase productivity. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. 5 years related experience or training preferred. Language Ability: Read and comprehend simple instructions, short correspondence and memos. Write simple correspondence. Effectively present information in one-on-one and small group situations to customers, clients and other employees. Mathematical Ability: Calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference and volume. Apply concepts of basic algebra and geometry. Reasoning Ability: Apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Deal with problems involving a few concrete variables in standardized situations. Computer Skills: Basic Supervisory Responsibilities: None. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be comfortable working in a Manufacturing facility. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to lift up to 40 Lbs. Must be able to work in a standing position up to 8 hours per day. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Job Type: Full-time Pay: $25.00 - $35,0000 Hr Companies governed by ITAR (International Trade and Arms Regulations) reserve the right to background check/and random drug testing for all applicants Powered by JazzHR jn YbXJAPaE

Aerospace manufacturing company in Yorba Linda area is seeking CNC Operators experience in Swiss Lathes to join their team! A Lathe Machinist plays a crucial role in the manufacturing aspect of the organization. Primary responsibility is to produce components to specification that will ultimately support the assembly of aerospace latches to be delivered to customers. $25 - $32/hr 3:00pm - 2:30am + OT Mon - Fri + Sat OT Must be open to OT ESSENTIAL DUTIES - other duties may be assigned Sets Up and Operates Lathe Machines in a production environment to produce parts in accordance with specifications given by blueprints, dimensional data sheets, and work order package. Checks daily schedule (Dispatch List) to ensure what job(s) need to run for the day. Checks, maintains, lubricates, and degreases production machines and equipment Starts set-ups and adjusts tooling according to Manual or CNC program to meet specifications required. Loads parts at indicated loading stations for machining and performs periodic quality checks for conformance to specifications and planning documents. Checks and inspects own parts for quality ensuring parts meet correct specifications in accordance with blueprints and data dimensional sheets. Works under limited supervision. EDUCATION AND/OR EXPERIENCE REQUIRED High school diploma or General Educational Development (GED) equivalent; and Requires 3 to 6 years on-the-job machine shop experience; and/or Equivalent combination of education and experience. To conform to U.S. export control regulations, applicant should be eligible for any required authorizations from the U.S. Government. Proficient in spoken and written English