Computer numerical controller machinist jobs in Jackson, TN

Miller Industries is seeking to fill the position of CNC Machine Operator. This position is based in our SHC Athens, Tennessee manufacturing facility, and is a part of our Machine Shop department.Operator may set up and operate various CNC machines as company needs require. Summary: Set up and operate fabricating machines such as brakes, drill presses, lasers, lathes, and mills. Essential Duties and Responsibilities include the following. Other duties may be assigned. Prepare and operate CNC machines to perform tasks such as drilling, grinding, milling etc Ensure working environment is clean and safe Verify specifications Read parts list Understand specifications of the task at hand and the desired result by reading blueprints, mechanical drawings etc. Translate instructions into computer commands so the machines can perform the correct function. Prepare and load raw materials and parts onto the machines Supervise the machines while they execute the tasks and make any necessary adjustments to produce a better result Inspect and measure finished products and compare them with requirements to determine if the process has been completed properly Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED); one to three months related experience and/or training; or equivalent combination of education and experience. Skill in operating CNC machinery and tooling as well as precision measurement tools; experience in running mills is required for this role. Must be able to utilize various measuring devices, interpret blueprints and use shop math (Basic math is needed due to the technological needs of many fabrication parts). A keen eye for detail and results-driven approach. Working Conditions and Physical Effort: Essential Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Certain reasonable accommodations may be made to enable individuals with disabilities to perform applicable essential functions based on the need of the business. While performing the duties of the job, the employee is: • Regularly required to talk and hear. • Required to stand, walk, climb, sit, balance, stoop, kneel, and crouch. • Frequently required to use fingers, hands, and arms to handle and reach. • Must frequently lift and/or move 5-30lbs. • Must rarely lift and/or move up to 75+lbs. • Specific vision abilities required by this job include close vision, distant vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. • Occasionally required to work four 12-hour days, up to 5 days consecutively as business demands. • Ability to wear protective gear due to fumes or airborne particles. • Ability to frequently be exposed to flashing lights. • Must occasionally be exposed to weather conditions, including precipitation, extreme cold and extreme heat. • Regularly required to wear hearing protection in a loud environment. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions based on business need.

CNC Programmer / Mold Maker - Injection Molding Type: Full-time About the Role Lead CNC programming and mold design/repair for plastic injection molds, jigs, and fixtures. You'll program toolpaths, redesign components for longevity, and drive continuous improvement in a busy tooling group. What You'll Do Program CNC mills/lathes/EDM (Mastercam/SolidWorks preferred) Perform mold design, repair, and improvements; reverse engineering Plan sequences/operations; estimate cycle/process time Create and maintain CNC files/data; train peers on CNC basics Collaborate with production planning and engineering on standards Must-Haves 5+ years in plastic injection molds (design/repair) 5+ years on CNC equipment (mills, lathes, EDM) 5+ years CNC programming (Mastercam/SolidWorks/UG) CAD/CAM proficiency; strong manufacturing math; on-site availability Work Environment Loud manufacturing environment; hearing PPE required; exposure to moving mechanical parts/fumes/heat.

Summary/Objective The CNC Operator (all levels needed) will operate equipment according to established procedures in a safe and quality manner. Dimensional measurements will be required during the operation of equipment to assure compliance to requirements. Adjustments to the equipment will be executed during the operation of equipment to meet established run rates and part accuracy. This involves performing First Piece Inspection and continuous Quality activities. Equipment will include Mills, Lathes, CNC's and screw machines. Essential Duties & Responsibilities Implement and sustain S, Q, D, C, I activities Develop, sustain and improve CNC machine tool methods and procedures Assist tool selection in the development and implementation of fixtures for new product development Develop standard work, tool setup sheets, and standard operations for production jobs Troubleshoot various problems (improper tooling, dull tools, wrong location of machined feature, code errors, etc.) and develop corrective action to prevent reoccurrence Perform Quality Assurance activities while operating equipment (Optical systems, calipers, gages, indicators) Participate in Productive Maintenance activity Supervisory Responsibilities This position has no supervisory responsibilities. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Interpret technical prints (GD&T) Must have basic knowledge of CNC machine “G-Code” and troubleshooting skills Experience maintaining and changing tools Experience determining offsets and adjusting accordingly Interpret Work Orders and enter data into the Manufacturing database (ERP) Education/Experience Required: High School Diploma or GED Preferred Minimum 1 year of experience in machining or related mechanical field Vocational/Technical Degree Lean manufacturing experience Kaizen event experience 5S knowledge and experience Language Skills Ability to read, write, listen and follow instructions. Ability to read blueprints. Mathematical Skills Basic shop math and precision measurement skills. REASONING ABILITY Ability to make adjustments as needed by following SOP's. Travel Requirements Travel will normally be less than 5% (training, equipment development, satellite facility support). Other Skills & Abilities Attendance is an essential job requirement defined as having regular, consistent, reliable, punctual and predictable attendance including the ability to work regular hours and shifts, overtime before and after shifts and on weekends. Ability to work as part of a team, including all related departments/plants or independently as required to achieve internal and external customer satisfaction. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. While performing the duties of the job the employee works in a manufacturing environment and may be exposed to fumes or airborne particles, moving mechanical parts and vibration. PHYSICAL ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to talk or hear. The employee is frequently required to sit and use hands to touch, handle, or feel. The employee is occasionally required to stand, walk, reach with hands and arms, climb or balance and stoop, kneel, or crouch. The employee is occasionally required to lift up to 50 pounds. The vision requirements include close vision and ability to adjust focus. WORK AUTHORIZATION This position requires compliance with ITAR requirement. Must be a “U.S. Person” (per ITAR 120.15) and are required to show proof substantiating this upon being hired. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties and/or responsibilities may change at any time with or without notice at the sole discretion of the Company.

Qualification Requirements: Physical Requirements: Good hearing and able to communicate effectively. Able to work comfortably in dangerous work environments. Requirements: Must be at least 18 years of age. Able to identify shop safety hazards. Strong knowledge of safety requirements. Attention to detail. Knowledge of metals and their properties. Ability to produce high quality work. Able to understand spoken and written English effectively. Able to pass post offer substance testing. Essential Functions: Uses a variety of tools to measure, calculate, cut and modify materials. Processes skills and knowledge to safely operate machine shop tools and equipment. Follows established manufacturing methods using standard machine tools, materials and equipment. Adjusts feeds, speed, and depth of cut to machine quality. Reads diagrams and blueprints and manufactures metal parts to precise specifications. Set up tools such as milling machines, grinders, lathes and drilling machines. Correctly use precision measuring tools. Routinely maintains equipment to ensure cleanliness, accuracy and reliability. Physical Demands: Physically demanding job which requires lifting heavy objects, twisting, bending and reaching. Must be physically agile and able to work in confined spaces as well as high elevations. Work Environment: Exposure to varying extreme climates and outside weather conditions (heat/cold, wet/humid). BE SURE TO APPLY ON OUR WEBSITE: ****************

CNC Machinist Night Shift In this role, your mission and responsibilities will be to: This Machinist role is responsible to operate and maintain the CNC equipment in a safe and efficient manner to achieve the quality and production standards of the company. This position works with fabrication, assembly, material handling, and the machine shop as well as the planning and engineering departments. Specifically, youll: Charged with the responsibility of defining obstacles and aid in creating solutions concerning safety, identifying safety hazards, and suggesting corrective actions. Set-up and operate Toolroom equipment (i.e., lathe, mill, broach, grinders etc.) and machine parts to job specifications Review job orders, bring in the required material into the shop from the warehouse Operate multi-head CNC controlled machines. Fabricate part(s) to blueprint specification using appropriate machine(s) and process, such as; Strippit, Whitney, Cincinnati Press Brake, Koike Torch. Ability to operate general fabrication equipment (i.e. Mubea, Carlton Radial Arm Drill, Roller, etc. Operate over head crane in a safe manner in accordance with company safety protocols. Organize paperwork to ensure jobs are completed as per company standards. Work with the CNC Programmer to maximize plate usage for the highest efficiency.

Job Description Join Card-Monroe Corp. as a Full Time CNC Machinist in Hixson, TN, and be part of a team dedicated to problem-solving and innovation. You'll have the opportunity to work onsite in a professional and dynamic manufacturing environment. The competitive pay of $25-$29 per hour reflects our commitment to valuing your skills and expertise. In this role, you will play a key part in creating high-quality products while upholding our values of integrity and safety. If you are a talented CNC Machinist looking for a rewarding opportunity, apply today and take the next step in your manufacturing career. You will be provided great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Health Savings Account, Competitive Salary, Paid Time Of, Wellness Reimbursement, and Tuition Reimbursement. Hello, we're Card-Monroe Corp. With more than 40 years in business we pride ourselves on being the world leader in tufting technology and we're looking for team members to help that statement continue to be true. We offer competitive salary and benefits and a unique culture where we value each individual employee. Please visit our website ****************** to learn more. Your day to day as a CNC Machinist As a Full Time CNC Machinist at Card-Monroe Corp. in Ringgold GA you will play a crucial role in setting up and operating CNC milling centers and turning centers. Your precision and expertise will be vital in producing a diverse range of parts based on blueprints and shop drawings. By utilizing your technical skills and attention to detail, you will contribute to our commitment to innovation and excellence in manufacturing. Join our team and be at the forefront of creating quality products. What you need to be successful To excel as a Full Time CNC Machinist at Card-Monroe Corp. in Ringgold, GA, high attention to detail and problem-solving skills are essential. Ideal candidates will have a high school or trade school diploma and a background as a machine operator with 3-5 years of experience. Proficiency in reading and interpreting blueprints and shop drawings is a must, along with familiarity with measuring tools like dial calipers, tape measures, micrometers, and protractors. Candidates should also have a solid grasp of basic mathematical skills and be comfortable working with PCs. Demonstrating a commitment to precision and a strong work ethic will be key to success in this role. Knowledge and skills required for the position are: High School or Trade School graduate preferred. Machine operator background with 3-5 years of experience. Must be able to read and work from blueprints and shop drawings. Must be familiar with measuring tools such as dial calipers tape measures protractors micrometers height gauge and squares. Must be proficient in basic mathematical skills. Basic knowledge and understanding of PC's preferred. Are you ready for an exciting opportunity? If this sounds like the right job for you, don't wait - apply today to join our team. We look forward to hearing from you!

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. LEVEL 4 CNC MACHINIST TECHNICIAN - Multiple Positions Available - 2nd & 3rd Shift $2500 Sign On Bonus $29.40/hour starting pay + 6 % Shift Differential Location: Lafayette, Indiana Medical/Dental/Vision/Life Insurance, Incentives/Bonus Opportunities, Matching 401k available day one. *************************** : Apply online and create a candidate account. CATERPILLAR - BUILD WHAT MATTERS What matters most to you? Is it being part of a strong team? Supporting your family? Solving global problems? You can do these and more at Caterpillar; where your work enables progress around the globe, and you contribute to meaningful work. Together, we can build what matters! This position description is for Level 4 CNC Machinist within the Large Power Systems Division located in our Lafayette, IN facility. Candidates must have a strong background with experience in boring milling, drilling and reaming. Must have knowledge of CNC programs and be able to make offset adjustments as required. Actual shift availability varies week by week and successful candidates will be started as soon as a position becomes available on their requested shift. Please note that this could mean a sizable waiting period before starting. Job Duties/Responsibilities may include, but are not limited to: * Responsible for production, quality, housekeeping and other related duties associated with the operation and set up of CNC and NC controlled machines, transport material, audit, operate wash tanks and operate some manual operations. * Interpret CNC programs Job Instruction Sheet, CMM data, Gageit (gage tracking) and accountable for processes by monitoring Infinity. * At times may be required to work overtime to support the manufacturing requirements. * Must have the ability to trouble shoot and solve problems dealing with machine, tooling, and program malfunction and solve everyday problems. * Must be able to manage time and work well in a team environment. Basic Qualifications: * Two or more years of experience in a manufacturing environment: multi-axis CNC machining experience, ability to program CNC machines with Fanuc, Siemens or other controllers. * Strong working knowledge of machining principles; basic SPC, blueprint reading; understanding of geometric tolerances; ability to interpret CMM reports; quality data; and work experience in a lean manufacturing environment. * Must pass CNC skills assessment in order to win position * Required to stay in section for 12 months except for a promotion or nights to days move Physical Requirements: * Candidates for all positions must have the ability to work in a fast pace, medium to heavy duty assembly, technical environment. * Work may involve frequent bending, stooping, and kneeling, twisting, turning, climbing, and standing on concrete for 8+ hours. * All positions also require the ability to lift 40 pounds and withstand frequent repetitive movement of hands with a variety of tooling. * Some positions require the ability to perform tasks on a moving conveyor under time constraints * Some positions require the ability to climb ladders, stairs, work on platforms and work at heights * Some positions require the ability to work in confined spaces * Some positions require the ability to wear a respirator * Must be able to lift and manipulate engine components during the assembly process * Must be able to use hand and pneumatic tools as well as automatic torque equipment Additional Information: * Location of this position is in Lafayette, IN * Shift: 2nd Shift (3:30pm-11:30pm) & 3rd Shift (11:30pm-7:30am) * Will train on (1st shift 7:30am-3:30pm) anywhere from 3 weeks to 3 months * Please Attach an Updated Resume * Relocation assistance is available to eligible candidates * 40-hour work weeks with potential for Overtime * 144 hours of paid Personal Time Off (PTO) - (Prorated based upon start date) * 11 Paid holidays * Climate controlled work environment - most areas * Clean/safe work environment Please ensure you frequently check the e-mail account you provided on your application, including the junk/spam folder, as this is the primary correspondence method in our recruiting process. #LI Summary Pay Range: $29.40 - $37.40 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. * Medical, dental, and vision benefits* * Paid time off plan (Vacation, Holidays, Volunteer, etc.)* * 401(k) savings plans* * Health Savings Account (HSA)* * Flexible Spending Accounts (FSAs)* * Health Lifestyle Programs* * Employee Assistance Program* * Voluntary Benefits and Employee Discounts* * Career Development* * Incentive bonus* * Disability benefits * Life Insurance * Parental leave * Adoption benefits * Tuition Reimbursement * These benefits also apply to part-time employees Posting Dates: October 8, 2025 - January 6, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Requirements Required Skills / Experience / Equipment Operation: Experienced machinist who can set up and run CNC lathes. Must be able to read blueprints, work to close tolerances, use precision measuring tools, monitor machines and be able to make necessary adjustments. Must be able to follow established processes, quality and safety standards. Inspection experience is helpful. Familiarity with G-code programming and the basic operation of Fanuc controls Must have sufficient experience and/or training in basic machine shop practices to program, set-up, and operate both manual and CNC equipment in accordance with engineering drawings and tooling instructions on both existing and new parts. Must already possess ALL CNC Intermediate Program / Set-Up / Operate VIII Skills, Experience and Requirements. Must display and maintain a positive attitude. Must be able to generate process data, tool lists, set-up sheets, and machine programs without assistance. Physical/Mental Essential Functions: Ability to stand for prolonged periods of time Ability to reach above shoulders Ability to walk back and forth through-out facility Ability to control operation with hand or foot Ability to lift / carry up to 70 pounds. Ability to turn wrist frequently in repetitive motion Working Conditions: Work environment is very fast paced. Work is primarily conducted on the shop floor. Other duties, responsibilities and activities may change or be assigned at any time with or without notice as assigned by the Manager. The job description does not constitute a contract of employment and the position remains at-will. Dwyer Instruments Inc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, marital status, pregnancy, sexual orientation, ancestry, genetic information, or any other characteristic protected by law. Salary Description $25-$30 an hour

Set up, operate and troubleshoot machine tools such as lathes, milling machines and CNC machines to create parts from metal and plastic. Use precision measuring instruments to ensure that parts meet specifications. Maintain and troubleshoot machines to ensure they are operating at optimum efficiency. Essential Functions • Set up, operate, and troubleshoot CNC Machines to achieve first article. • Considered to be process expert and trainer. • Work directly with programmer and engineers in planning and execution of insourcing projects. • Read and interpret schematics, blueprints, and work instructions or MIPs proficiently. • Maintain tooling while operating machines. • Determine specifications for inspection of work using precision measuring and gaging tools, performing required inspection before, during, and after machining. • Change tooling and/or tooling holders to maintain machine settings to produce a quality product throughout production. • Operate other equipment as required, both NC controlled and manual (if applicable). • Properly and safely load and unload parts and raw material in CNC Machinery. • Perform necessary side operations during machine cycle time as required (i.e., deburring, etc.) • Perform daily and regular cleaning and light maintenance task on CNC Machinery. • Meet production goals in terms of cycle time, quantity, and quality. • Palletize material coming to machine from preceding operation, as required. • Maintain appropriate Kanban records, levels, etc. • Remove chips and shavings as needed. • Solve minor problems and recognize bigger problems that require supervisor/manager assistance. • Verify and record quality assurance measurements and document defects. • Maintain and improve 5S standards in the cell. • Comply with company policies, ISO standards, and applicable laws and legislation. • Work towards SQDC target metrics. • Support manufacturing engineers as directed in daily production, projects, and special assignments. • Must have extensive experience with one or more of the following CNC machines: Mazak, Haas, DMG Mori, Mori Seiki, and/or Okuma. • Must be able to read and utilize the following measuring instruments: 6 to 12” scale, vernier calipers, comparator, pin gauge, thread gauges, and micrometer. • Must be able to read blueprints, bills of materials, and part specifications. • Must understand and have the ability to perform tool wear offsets. • Must have experience machining one or more of the following materials: nickel-based stainless-steel alloys (Inconel, Monel, etc.), Cooper, Aluminum, and/or Titanium. • Ability to prioritize work and work with minimal supervision. • Must be able to read, write, and perform simple to moderate mathematical calculations. • Skill and ability to operate machines precisely with high degree of attention to make quality products. • Ability to perform job in safe manner. • Must be able to add, subtract, multiply, and divide and use these skills to solve problems. • Must be able to understand and follow verbal and written instructions, complete forms with accurate information. • Must be able to properly identify, count, and maintain required inventory. • Must be able to work as a cooperative and contributing member of the Team. • Perform other duties as assigned. Qualifications • High school diploma, GED, Technical School certificate, or related work experience required. • Three (3) to five (5) years prior successful experience operating, setting up, and troubleshooting CNC Machines. • Must have extensive experience with one or more of the following CNC machines: Mazak, Haas, DMG Mori, Mori Seiki, and/or Okuma. • Must be able to read and utilize the following measuring instruments: 6 to 12” scale, vernier calipers, comparator, pin gauge, thread gauges, and micrometer. • Must be able to read blueprints, bills of materials, and part specifications. • Must understand and have the ability to perform tool wear offsets. • Must have experience machining one or more of the following materials: nickel-based stainless-steel alloys (Inconel, Monel, etc.), Cooper, Aluminum, and/or Titanium. • Ability to prioritize work and work with minimal supervision. • Must be able to read, write, and perform simple to moderate mathematical calculations. • Skill and ability to operate machines precisely with high degree of attention to make quality products. • Ability to perform job in safe manner. • Must be able to add, subtract, multiply, and divide and use these skills to solve problems. • Must be able to understand and follow verbal and written instructions, complete forms with accurate information. • Must be able to properly identify, count, and maintain required inventory. • Must be able to work as a cooperative and contributing member of the Team.

Job DescriptionJOB SUMMARY/OBJECTIVE: Cheytac USA is looking to hire a full-time Manual Lathe Operator with 3-5 years experience. The lathe operator sets up and operates manual horizontal lathe to perform machining, operations, such as turning, boring, facing, and threading parts. Reads blueprints and drawings to determine machining to be done, dimensional specifications, set up and operating requirements. ESSENTIAL JOB FUNCTIONS: -Loads/mounts materials into lathe manually. -Select and install cutting tools according to set up requirements. -Removes and replaces dull cutting tools and attaches tools and work pieces to the lathe. -Observes numerical displays and compares with blueprint data to verify dimensional, adjustments and speeds of machining cuts. -Inspects fabricated part to ensure conformance to specifications using micrometers and precision dial gauges. WORKING CONDITIONS/PHYSICAL DEMANDS: -40 hours per week -May be exposed to dangerous mechanical equipment -Exposure to loud noise and heavy lifting -Standing for long periods of time. QUALIFICATIONS/ABILITIES: -Knowledge of machines and tools including their designs, uses, repair and maintenance. -Ability to analyze and interpret engineering drawings. -Ability to function effectively and productively within a team focused work environment. -Knowledge of mathematic applications and measuring tools. -Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacturing of goods. -Attention to detail -Quality focused -Safety compliant -Minimum 3-5 years of experience.

Roles & Responsibilities: Setup, layout and operate various CNC lathes and/or mills Reads blueprint or job order for product specifications such as dimensions and tolerances and tooling instructions such as fixtures, cutting speeds, depth of cut and determines sequence of operations. Selects, positions, and secures tool in tool holder. Positions and secures work piece in holding device, machine table, chuck, centers or fixtures. Moves controls to position tool and work piece in relation to each other, and to set specified feeds, speeds and depth of cut. Sets up fixture, starts machine. Requires ability to read precision measuring equipment such as micrometers and calipers. Observes operation of machine and verifies conformity of machined work piece to specifications. Keeps work area clean and orderly Follows all Company rules and safety policies. Discusses errors in diagrams or production order with supervisor or engineer to clarify assembly problems. Core Competency Requirements: Performs any assembly-type functions, using hand or power tools. Adjusts, trim and fitting parts to close tolerances. Follows visual aids (standard work) to ensure work is correct. May perform testing of assembled product. Make up cartons, print labels, insert protective packing material, seal finishing product. Meet efficiency rates. Perform quality checks to ensure quality specifications are met. Work within all safety guidelines and wear all required PPE (steel toe shoes, hearing protection and safety glasses). Reports defective materials or questionable conditions to the department supervisor or team leader. Maintains the work area and equipment in a clean and orderly condition - 5S. Must be flexible to rotate job assignments within various work cells. Performs related duties as assigned by supervision Required Qualifications: High School Diploma or equivalent 1+ yrs of previous CNC experience preferred Physical Needs: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Ability to add and subtract/basic math. Ability to follow written and verbal instructions Good hand-eye coordination. Ability to lift up to 25lb. Ability to stand 90% of shift.

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. Completes set up, and operates both manual and CNC equipment for the efficient production of quality components. Responsible for the production of high-tolerance precision parts. This is a night shift position. First week: Monday - Wednesday 6:00pm - 6:30am. Second week: Monday - Wednesday 6:00pm - 6:30am, Thursday 6:00pm - 2:30am. Shift differential and overtime pay included. What You'll Do as a CNC Machinist II • Intermediate ability to interpret technical prints. • Intermediate knowledge and use of CNC machine G&M Code and troubleshooting skills to identify and communicate program improvements to programmers. • Setup, operate and adjust machining equipment for basic and intermediate complexity part production without supervision. • Monitors quality of parts produced utilizing basic and advanced visual metrology devices to ensure Customer requirements are met and follows procedure for handling nonconforming parts. • Abides by all Company safety and health policies and procedures. • Must use personal protective equipment if required. (Company provided) • Aware of and conforms to company ISO goals and objectives and supports company ISO requirements. • Aware of and actively participates in company's Lean philosophy of continuous improvement. • Ensures measuring devices used to check product quality are calibrated prior to use. • Maintains in-process product identification. The Experience, Skills and Abilities Needed Required: • High school diploma or equivalent. • Minimum one (1) year machining experience in addition to Vocational/Technical degree or four (4) years CNC Machining in lieu of degree. • Experience in a CNC I capacity • CNC set up • Good hand/eye coordination (manual dexterity), basic organizational and troubleshooting/problem solving skills • Intermediate knowledge of CNC G&M codes Preferred: • Technical/Vocational degree in a related field • Data entry system experience What STERIS Offers We value our employees and are committed to providing a comprehensive benefits package that supports your health, well-being and financial future. Here is a brief overview of what we offer: • Market Competitive Pay with shift differential ⦁ Climate controlled facility • Extensive Paid Time Off and (9) added Holidays • Excellent Healthcare, Dental and Vision Benefits • Long/Short Term Disability Coverage • 401(k) with a company match • Maternity and Paternity Leave • Additional add-on benefits/discounts for programs such as Pet Insurance • Tuition Reimbursement and continued education programs • Excellent opportunities for advancement in a stable long-term career #LI-KL1 Pay rate for this opportunity is $20.00 - 24.00. This position is eligible for bonus participation. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity.

The College of Southern Nevada appreciates your interest in employment at our growing institution. We want your application process to go smoothly and quickly. We ask that you keep in mind the following when completing your application: Once you start the application process you cannot save your work. Please ensure you have all required attachment(s) available to complete your application before you begin the process. Required attachments are listed below on the posting. Your application will not be considered without the required attachments. Please note that applications must be submitted prior to the close of the recruitment. Once a recruitment has closed, applications will no longer be accepted. If you are unable to attach the required documents to your online application or need assistance regarding the application process, please contact the Talent Acquisition team within Human Resources via email at ********************** or call ************** to be directed to the appropriate Recruiter. Job Description DWED (Department of Workforce and Economic Development) and the Applied Technology Department at the College of Southern Nevada invite applications for a Part-Time Advanced Manufacturing - Machining Instructor within the Advanced Manufacturing Program beginning immediately. The successful candidate will demonstrate industry and teaching experience. Responsibilities The Advanced CNC Manufacturing Instructor will develop and instruct lab and lecture classes and develop student learning outcomes and course descriptions. This includes organizing instruction towards achieving student learning objectives; selecting textbooks and another curriculum; conferring with students; evaluating student mastery and providing a safe and positive classroom and laboratory environment. Primary teaching areas are in Advanced Manufacturing Technology topics such as: Metrology Geometric Dimensioning and Tolerancing (GD&T) Machining CNC Milling and Turning CADD and Additive Manufacturing (Preferred) Automation with PLCs and Robotics (Preferred) Related engineering technology and technical physics classes Other duties will include: Program assessment and curriculum development; student mentoring; assess student learning and progress, scholarship of teaching and learning; maintaining accurate student records, upholding professional and ethical standards, participate in professional development activities; outreach to the college, community, and profession; supervising student assistants and staff as necessary; collaborate with other instructors and staff and duties as assigned by the Director of Advanced Manufacturing. The candidate is expected to participate in student recruitment activities. The candidate will participate and assist the team to maintain and develop strong industry and community partnerships, within and outside of the program advisory committee. They will also commit to continuing their professional development as an educator through attendance at industry conferences and membership in professional associations. Minimum Qualifications Associate's degree in the following: Industrial or Mechanical Technology; Mechanical Engineering (Degrees in related fields are also acceptable) OR five (5) years of industrial experience in a machining environment AND A minimum of 1 year of work experience in a machining environment using CNC Mill/Lathe Machines Teaching experience in Career and Technical Education (Preferred) Preferred Qualifications In addition to the minimum requirements, the department encourages applicants with the following credentials to apply: Bachelor's degree in education, adult education, or a related field Experience teaching IET programs, preferably in a CTE setting Experience teaching ABE, including ESL, math, and reading 10 or more years of work experience in Manufacturing or Industrial Technologies 5 or more years of work experience in Machining 1 or more years of experience teaching in Career and Technical Education Leadership/ Management Experience Industrial certifications such as NIMS, NC3, etc. Experience teaching online/hybrid classes, Canvas Experience creating a college curriculum Experience developing an industrial lab in a college setting, such as a Machining, Manufacturing, or Mechanical Technologies Lab Experience working in diverse multicultural situations Starting Pay $40.00 per hour Yes Full-Time Equivalent 48.8% Required Attachment(s) To be considered for this position, please upload the following documents to your application: Resume Cover Letter Academic Transcripts Contact information for three professional references Applicants should fully describe their qualifications and experience with specific reference to each of the minimum and preferred qualifications. The search committee will use this information during the initial review of application materials. NSHE - INTERNAL APPLICANTS PLEASE NOTE CSN employees or employees within the Nevada System of Higher Education (NSHE) MUST use the "Find Jobs" process within Workday to find and apply for jobs at CSN and other NSHE Institutions. Once you log into Workday, type "Find Jobs" in the search box which will navigate to the internal job posting site. Locate this specific job posting by typing the requisition number in the search box. If you complete an application outside of the internal application process and apply as an external candidate, your application will no longer be considered at the time of minimum qualification review. In order to prevent the disqualification of your application, you will need to reapply as an internal candidate before 11:59 pm the day prior to the position close date. For more details on this position, please visit our website: My Career at CSN. CSN is an Equal Employment Opportunity/Affirmative Action institution. For more information, visit ************************************* Posting Close Date 06/30/2026 Note to Applicant Applicants should fully describe their qualifications and experience with specific reference to each of the minimum and preferred qualifications. The search committee will use this information during the initial review of application materials. All document(s) must be received by 11:59 p.m. the day prior to the closing date posted on the job announcement. This position may require that a criminal background check be conducted on the candidate(s) selected for hire. As part of the hiring process, applicants for positions in the Nevada System of Higher Education may be required to demonstrate the ability to perform job-related tasks. Schedules are subject to change based on organizational needs. CSN is responsive to serving the educational needs of a diverse and ever-changing community. CSN employs only U.S. citizens and aliens authorized to work in the U.S. CSN does not sponsor aliens applying for faculty, professional staff, or management positions (H-1B Visas) in the absence of exceptional circumstances as defined by the USCIS.

We are seeking skilled CNC Machinists to join our clients team. The ideal candidate will have experience in fabricating parts using CNC machines with 3+ years experience. Full Time Position - Set up and operate CNC machines to fabricate parts according to specifications - Read and interpret blueprints to determine machining operations - Program and adjust machine controls to regulate factors such as cutting depth, speed, feed, and coolant flow - Perform quality checks using precision measuring instruments like coordinate measuring machines (CMM) - Maintain equipment by cleaning and performing routine maintenance tasks Experience: 3 Years CNC Experience - Proficiency in SolidWorks or CAD software for reading technical drawings - Knowledge of plastics injection molding processes is a plus - Ability to operate a forklift safely - Strong mathematical skills for basic calculations and blueprint reading Benefits and Competitive Pay Send Updated Resume Today!

Job DescriptionSnelling is currently recruiting for a Manual Machinist for a company in the Trussville area. This is a 1st shift position with a starting pay rate of $27.00-30.00/hr, depending on experience. Apply Today with Confidence!!!!!!! Job Responsibilities of Manual Machinist: Machine plates including aluminum, iron & steel. Machine pins to close tolerance. Drilling, tapping and milling. Work from provided detailed manufacturing drawings. Use of manual machine shop equipment such as lathes, drill presses and vertical milling machines. Use of measuring devices such as micrometers, dial indicators and calipers. Job Requirements for Manual Machinist: Need to have 2-3 years minimum of Manual Machinist experience with strong manual lathe required! Need to be comfortable using all types of tools Need to have some forklift and/or overhead crane operating experience Requires a pre-employment drug screen and criminal background check. Interested and qualified candidates for the Manual Machinist position should apply now or send their resume to ************************* for immediate consideration. Resumes will be reviewed as quickly as possible and qualified applicants will be contacted to set up an interview. For additional information, please contact Whittney Taylor at ************ SNELLING is a full-service recruiting firm, placing candidates in temporary, temp-to-hire and direct hire positions in the Jefferson and Shelby County areas for over 70 years. SNELLING is a drug free workplace. All inquiries are strictly confidential, and all search fees are paid by our clients. Contact us TODAY with confidence!

Provides support for machining operations of products and assemblies using manual and/or CNC machine tools. The machinist also performs preventive maintenance of machines, dies, molds, figures and tools. Functional Contribution (Contribution Matrix): * Works under the general direction of a more seasoned team member • Routes questions to the appropriate person • Demonstrates a willingness to learn and improve. • Adheres to policies, procedures, and best practices • Ability to learn new skills and follow directions. • Produce at takt time while following standard work. • Able to work individually and in teams. • Follow the Watlow Way (WW) Behaviors, Values and Principles • Managing for Daily Improvement (MDI)/ Improvement participation • Demonstrate knowledge with computer systems • Models WW behaviors, principles, and values Skills, Abilities and Mastery (Responsibility Matrix): Delivery: * Runs CNC machines, mills, drills, lathes, saws, shears, presses, punches and drill presses. • Setup and run basic manual machines to produce parts, dies, molds, and fixtures. • Maintain machines; sharpen tools, trouble shoot hydraulic, pneumatic, and electrical equipment. • Reads and interprets basic prints, draws sketches, corrects prints, designs step-by-step work processes. • Complete documentation (process and load sheets) • Works under direct supervision on tasks that are standardized and does not typically exercise significant independent judgment. • Resolves routine questions and problems, referring more complex issues to senior Machinists. Business Partner: * NA Center of Expertise (COE) • Industry Certifications/2 year degrees Education, Experience and Certification Requirements: • 0-3 years' related experience • Trade Jobs- Preferred Two-year degree or Technical Certificate or related experience (1-3 years)

Our experienced CNC Lathe Machinist role will be responsible for setup, operation of and maintenance of CNC Lathe milling centers, applying knowledge of machine shop theory and procedures, shop mathematics, machineability of materials, and layout techniques. Job Duties Essential Functions Ensure work area is clean, secure, and well maintained. Follow established processes, quality and safety standards with continuous improvement initiative of existing and continuous parts. Calculate dimensions or tolerances, using instruments, such as micrometers or vernier calipers. Machine parts to specifications, using machine tools; lathes, milling machines, shapers, and grinders. Measure, examine, and test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers. Set up, adjust, and operate machines to perform precision machining operations. Monitor the feed and speed of machines during the machining process. Maintain machine tools in proper operational condition. Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines. Confer with CNC lathe programmers to check and ensure that new programs or machinery will function properly and that output will meet specifications. Diagnose machine tool malfunctions, determining adjustments or repairs. Dispose of scrap or waste material in accordance with company policies and environmental regulations. Separate scrap waste and related materials for reuse, recycling, or disposal. Check work pieces to ensure that they are properly lubricated or cooled. Support metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties, and mathematics. Dismantle machines or equipment, using hand tools or power tools to examine parts for defects and replace defective parts where needed. Test experimental models under simulated operating conditions, for purposes such as development, standardization, or feasibility of design. Establish work procedures for fabricating new structural products, using a variety of metalworking machines. Essential Core Values Our values, Integrity, Pride and Awareness, are the foundation of our culture on which we develop relationships and deliver results at Burger & Brown Engineering, Inc. Our values unify us in our effort to provide our customers with expertise, experience and meticulous attention to detail, Partner in Precision . As an associate of the Burger & Brown Engineering, Inc. team, support and maintain a positive culture by upholding our values, policies and procedures. Job Specifications H.S. diploma or GED required, preferred associates, vocational school and/or on the job experience 5+ years' experience in CNC conventional lathes Experience in using and/or programming manual, semi-automated or automated tools and machines (lathe, grinders, mills, etc.) Must have a positive attitude with a demonstrated ability to troubleshoot Ability to read, interpret drawings/blueprints and follow routers Knowledge of metal properties and other material Participate in safety training and shop meetings. Outstanding mathematical skills and analytical abilities Excellent accuracy and attention to detail Self-motivated, punctual and regular attendance Available to work weekends and overtime Physical Specifications Continuous use of dexterity, manual/hand control and touch of objects Regular and continuous use of repetitive motion Continually standing for long periods and on hard surfaces Intermittent time spending bending or twisting the body Must be able to lift up to 50 pounds at times Frequent exposure to various metal scraps and materials Visual abilities; close/distant, color, depth perception, and ability to adjust focus

Manual Machinist BH Job ID: BH-3328-1 SF Job Req ID: Manual Machinist Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Manual Machinist (1st Shift) Shift: Monday - Friday 6:00am - 4:30pm Location: Moody, AL (On-site) About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: Are you a skilled machinist with a passion for precision and innovation? At Ingersoll Rand, we are seeking a talented and dedicated Manual Machinist to join our dynamic team. This is more than just a job; it's an opportunity to be part of a company that values creativity, excellence, and collaboration. Responsibilities: * Performs set ups of large Liquid Ring Vacuum Pump components and operations of large Vertical & Horizontal Lathes used to repair and overhaul Large Liquid Rind Vacuum Pumps & Compressors. * Interprets blueprints/drawings to determine critical dimensions, etc. Ability to read Micrometers, Vernier Calipers, Dial Indicators & other precision measuring & test equipment as required. * Able to maintain low tolerances as indicated by specifications or drawings as low as .0005" at times. * Understands how to select appropriate cutting tools for various metals. Understands how to determine speeds and feeds to obtain proper surface finish. * Able to work overtime; typically throughout the week and occasionally on weekends. * Safe operation of Forklift within a Machine Shop environment. Safe Over Head Crane operation. Adheres to all company EH&S & QMS processes. * Lifting and Rigging of heavy components of various configurations & weights. Assisting in the disassembly, reassembly, repair and rebuilding of Large Liquid Ring Vacuum Pumps. * Other responsibilities as assigned. Requirements: * Applicants will be required to demonstrate knowledge of machine setup, as well as usage of machine controls and capabilities. * 3+ years of experience as a machine operator/Machinist. * 2+ or more years of experience reading and interpreting blueprints. * 1+ or more years of experience working on king style boring mills (or vtls) * Ability to effectively and safely use a variety of tools and equipment, including but not limited to depth gauges, bore gauges, height gauges, feeler gauges, micrometers, calipers, deburring tools, die grinders, drill presses, and overhead lifting equipment. Core Competencies: * Proficiency with prioritizing and meeting multiple deadlines. * Ability to convert between metric and US standard units of measure. * Ability to deal with problems involving several variables * Ability to use standard problem-solving methods (ie. 5 Whys) as trained * Ability to effectively share information about job duties in one-on-one and small group situations to supervisor, customers, clients, and other employees of the organization. Preferences: * HS Diploma or GED preferred. Higher Education or certificate is a plus. * Experience with manual machining such as VTL/Boring Mill/ or Horizontal Lathe. Brands would include but not limited to Cincinnati and King brand. * Proven ability to set up and operate Manual Machines, work centers, specializing in tool changes and in-process offset adjustments. Travel & Work Arrangements/Requirements: * This position will be based 100% onsite at our Moody, AL facility What We Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit ************* What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances.

Job Details Anchor Fabrication MS Walnut - Walnut, MS $18.00 - $25.00 HourlyDescription CNC Operator/Set Up Locate and ensure correct material is delivered to work center Ensure machine is working properly, specifically that consumables are in good working condition Ensure appropriate program is delivered and entered Ensure that the correct tooling, feed, and speed combination is applied for the corresponding cut Accurately project completion of work orders at work center Completes assignments on time and correctly the first time Ensure jobs are staged correctly after completion Continually maintain a clean working environment Notify supervisor when tooling is needed Anchor Fabrication offers an extensive benefits package that includes medical, dental, vision, life, accident, critical illness, hospital indemnity and short and long term disability. Anchor Fabrication also offers a matching 401(k) plan with Empower. Please visit us in person at 501 Pulliam Drive or call ************ ext 134 or email ********************** for employment opportunities. Qualifications Conversational programming experience preferred Must be able to read and understand blueprints Must be able to read and understand measuring devices Prior work experience with CNC equipment on programming and set ups Must be able to lift 50 pounds Position requires ability to stand for prolonged periods of time Position may require bending, kneeling and stooping Exposed to shop elements such as noise, dust, odors and chemicals Anchor Fabrication is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact Julie Gomez at email **********************