Computer numerical controller machinist jobs in New Haven, CT

Summary: Lead CNC Lathe Set-up Machinist with Mazak, TRAK, and/or Okuma experience required on first shift at our precision manufacturing client near Hartford, CT. Direct-hire position, not a contract, with competitive compensation and full benefits package. *US citizens or US Permanent Residents (Green card holders) ONLY apply - no sponsorship available. Duties & Responsibilities: Lead set-up and operation of CNC lathe department to produce highly precise tools & finished component parts. Precisely read & interpret blueprints, schematics, job orders, and verbal instructions to ensure finished pieces conform to all specifications for dimensional tolerances. Determine & select appropriate machining procedures, tooling, and fixturing for each job. Monitor CNC machine operations, perform routine daily machine maintenance, promptly notify supervisor in event of serious mechanical malfunctions. Check all finished pieces for dimensional compliance using manual measuring devices, maintain associated documentation & paperwork, adhere closely to requisite inspection procedures, investigate & report any non-compliant product. Maintain clean & orderly workstation, including proper disposition of any and all tools, metrological devices, and other work equipment as instructed. Qualifications/Requirements: HS diploma or GED required, technical schooling or advanced education considered a plus Minimum 8 years' CNC lathe experience in an ASI/ISO regulated environment (AS9100/ISO9001 or ISO13485 preferred) Knowledge of Mazatrol and/or TRAK software a plus Must be able to stand/sit for extended periods and lift up to 25 lbs unassisted Benefits: 401(k) matching Dental insurance Health insurance Short-term disability insurance Life insurance Paid time off Salary: $30.00 - $45.00/hr DOE

Job Title: Lead CNC Machinist Company: Biomerics Position Type: Full-time Employee Hourly Rate: $25.00 - $40.00, depending on experience. CNC Machinist (Willemin) 2nd and weekend shift available. Second shift hours- 5AM-1PM Weekend shift - Flexible Competitive Salary & Benefits Biomerics provides contract manufacturing, laser processing, and finishing services to a wide range of industries with a strong commitment to customer service. Biomerics specializes in the most challenging machined and micromachined components, including those used in interventional and medical robotics applications. We pride ourselves on providing a supportive, positive work environment with opportunities for challenge and growth. Biomerics offers Swiss machining with integrated laser cutting on precision medical tubing. Laser/Swiss machining enables features to be machined and laser cut in the same process. Our core competency lies in smaller medical components, produced with high accuracy and repeatability. Traditional Swiss screw machining capability is also available for rapid prototyping and production. In addition, Biomerics utilizes five axis milling machines capable of producing complex finished components, while holding extremely tight tolerances. Job Description: Biomerics has immediate openings for talented CNC Machine Operator at our facility in Monroe, CT. Working in a team environment, this individual will ensure that automated manufacturing processes are producing optimal results. Representative Responsibilities: Prepare and operate machines to perform tasks such as drilling, grinding, milling etc. Understand specifications of the task at hand and the desired result by reading blueprints, mechanical drawings etc. Translate instructions into computer commands so the machines can perform the correct function. Prepare and load raw materials onto the machines. Set up and run first pieces to verify that the machines produce outputs according to specifications. Supervise the machines while they execute the tasks and make any necessary adjustments to produce a better result. Inspect and measure finished products and compare them with requirements to determine if the process has been completed properly. Requirements Desired Skills, Talent, and Qualifications: Knowledge of machine shop equipment and practice, (actual machining experience a plus) Hands-on experience with assembly, debug, and troubleshooting Previous experience working in a manufacturing setting is preferred but willing to train the right candidate. Must have strong attention to detail. Familiarity and skill with interpreting technical drawings and blueprints Ability to work independently and closely follow directions is essential Ability to run multiple machines during the shift "Equal Opportunity Employer: Minority, Female, Protected Veteran, Individual with Disabilities are encouraged to apply." Benefits: Medical/Dental/Vision Insurance, Short-Term Disability, Long-Term Disability, Life Insurance, Paid Vacation Days, Paid Holidays, 401k Please, No Recruitment Agency calls or emails (we are not using recruitment services for this, or any other role posted). Biomerics does not accept non-solicited resumes or candidate submittals from search/recruiting agencies not already on Biomerics approved agency list. Unsolicited resumes or candidate information submitted to Biomerics by search/recruiting agencies not already on Biomerics approved agency list shall become the property of Biomerics and if Biomerics subsequently hire the candidate, Biomerics shall not owe any fee to the submitting agency. The salary estimates are estimates from this job board and not a guarantee from Biomerics salary range. Salary Description $25-$40

TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive compensation and excellent benefits, including 401k, health/dental, vision, and paid time off. TOMZ maintains a modern, clean, and safe facility with state-of-the-art equipment and dedication to continuous process improvement. TOMZ is registered with the FDA as a Class 2 and Class 3 Medical Device Manufacturer and certified to ISO 13485. Summary of Position Reporting to the Operations Supervisor, this position will have direct responsibility for the set-up and manufacture of components within the Swiss machining department. TOMZ manufactures parts via high- precision metal machining, finishing, assembly, and anodizing processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, set up and operate equipment, and perform visual and dimensional inspections on machined components using various precision measuring equipment. Essential Functions * Operate and maintain Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes, 3-4-5 axis production equipment, including Robo Drills, Mill Turn, and horizontal/vertical mills. * Perform offsets and tool changes to ensure efficient production with minimal support. * Set up complex legacy components and new production orders for steady machine operation. * Conduct visual and dimensional inspections using microscopes, micrometers, calipers, pin gauges, thread gauges, comparators, Micro-Hite, CMM, and vision systems. * Perform scheduled and regular preventive maintenance on equipment. * Drive problem-solving activities for complex machine or process issues. * Complete and compile documentation related to quality inspection standards. * Ensure proper material control, identification, and traceability for conforming and nonconforming materials. * Support Quality Best Practices and contribute to continuous improvement in GDP/GMP. * Capable of mentoring and training lower-level machinists. * Facilitate a continuous improvement in culture and ensure quality and delivery objectives are met. * Utilize ERP and QMS systems to document and control inspection and traceability activities. * Maintain safe working conditions and follow occupational safety and health requirements, including PPE guidance. * Adhere to the TOMZ Quality Management System. * Perform other duties as assigned. Qualifications: Education * Certification from a technical school program or equivalent, directly transferable work experience in a manufacturing or engineering discipline may be accepted. * Certification from a technical school program is strongly preferred. Experience * Minimum of 3-7 years' experience in a regulated manufacturing environment. Qualifications * Experience in Class I, II, and/or III medical device manufacturing within a regulated environment using calibrated equipment and hazardous materials. * Relevant job experience in regulated manufacturing, with industry experience in aerospace, defense, or automotive. * Knowledge of and experience with GMP/ISO standards. * A self-starter capable of working independently and as part of a team, with the ability to collaborate across various functional areas, including R&D, Manufacturing, and QA, to achieve results with minimal guidance. * Advanced understanding of mechanical equipment usage, care, and inspection processes. * Ability to use hand-held tools for preventive maintenance, repairs, and tool changes. * Skilled in reading and understanding of blueprints, specifications, and procedures. * Detail-oriented with the ability to maintain accuracy and complete tasks promptly. * Proficient in identifying nonconformances and maintaining organization. * Intermediate skills in GD&T. Preferred Skills * Strong verbal and written English language communication skills. Physical Demands * Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds. * Perform repetitive hand and arm movements while lifting up to 20 pounds, including gripping, twisting, and placing components for extended periods, and lifting objects overhead. * 20/20 vision (assisted or unassisted) required for sorting raw and non-conforming materials. Good dexterity is needed for managing small to medium products. * Exposure to oil, grease, occupational noise, cleaning solvents, dust, metal particles, sparks, coolant, and sharp-edged materials. Personal protective equipment (PPE) such as safety glasses, dust masks, ear plugs, cut-resistant or chemical-resistant gloves, and engineering controls may be required. * Ability to sit or stand for prolonged periods.

North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies. Our products and services are used by the military, aerospace, and industrial markets, helping to advance technology and protect the free world. NAI was proud to be recognized as a Top Workplace on Long Island by Newsday! Our culture is very collaborative. We have team building events, company picnics, special event day and employee game room. Please visit our website at ******************** to see more about what makes us a unique place to work. Summary: As a CNC Programmer/Machinist Level II, you are responsible for setting up, programming, and operating all CNC and manual machinery to support production and engineering. You play a key role in shop upkeep, equipment maintenance, and process improvements. Working in NAI's meticulously maintained machine shop with state-of-the-art equipment, your advanced machining expertise helps ensure the efficient production of high-reliability components used in our custom electronic assemblies for aerospace, defense, and industrial systems. Requirements * Set up and operate CNC machinery to fabricate various parts * Applying knowledge of machine shop theory and procedures, shop mathematics, machinability of materials and setup techniques * Manage raw material and finished parts inventory in coordination with the Stockroom and Purchasing teams. * Perform basic preventative maintenance on equipment and common troubleshooting when a malfunction occurs * Track and maintain raw material, fixture, and tooling log * Responsible for the design and implementation of fixturing equipment for both engineering and production purposes * Responsible for sourcing and maintaining tooling/equipment needed * Interface with Engineering, Production, and Quality to control and meet tolerances needed. * Implementation of 6S practice and techniques in machine shop Qualifications and Education Requirements * High school diploma or equivalent required. * Minimum of two (2) years of related CNC machining or programming experience. * Experience utilizing manual knee mill, CNC vertical/horizontal mills, and other common machine shop equipment * Ability to program 3-axis minimum (4/5-axis optional) CNC toolpaths from step files and 3D models using CAM software * Ability to design create and build workholding fixtures/assemblies for use in a manufacturing environment * Strong CAM programming experience/knowledge. Mastercam, GibbsCAM, or Fusion. * Experience with Design for Manufacturability and End-use Assembly * Strong experience/knowledge in complex setups for reworking parts * Demonstrated knowledge of materials, material strengths, and material uses * Must have good oral and written communication skills (English) Preferred Skills and Abilities * Strong analytical and problem-solving skills * Strong level of attention to detail * Self-motivated, and possess a high degree of curiosity and desire to learn new things * Ability to take initiative and multi-task within a fast-paced environment North Atlantic Industries offer comprehensive and competitive packages including: * Medical, Dental, and Vision Insurance * Company-provided Life and AD&D Insurance * Voluntary Supplemental Life Insurance * Long-term Disability Insurance * Flexible Spending Accounts (FSA) * Employee Assistance Program (EAP) * Tax-deferred 401K with company matching contributions * Vacation, holidays, sick * Employee tuition reimbursement * Business casual dress environment * Schedule: M-F Day Shift North Atlantic Industries (NAI) is proud to be an Equal Opportunity Employer and is committed to providing equal employment opportunity for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to any legally protected status. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at ************ or by email at ***********. As a federal government contractor, in accordance with applicable laws, regulations, and Executive Orders, North Atlantic Industries (NAI) is required to develop annual Affirmative Action Plans for Protected Veterans and Individuals with Disabilities. Any employees or applicants who wish to review the Affirmative Action Plan for Protected Veterans and Individuals with Disabilities can contact us by sending an email to *********** or by calling ************. Salary Description $30.00 - $40.00 per hour

L.M. Gill Welding & Manufacturing, a Naval Defense manufacturing company located in Manchester, is currently looking for experienced Machinist who are proficient in 3, 4, & 5-axis CNC Milling machines. The ideal candidate should have experience in: Minimum of 5 years' experience with Set-up and operation of new CNC Milling machines, familiarity with G CODE for programming parts, due to short runs and with multiple set-ups. Must be able to work independently with minimal supervision. Ability to read blueprints and inspect their own work, using standard measuring equipment, e.g. micrometers and calipers. Working knowledge of Mastercam, or similar software, is a strong plus but not a requirement. Please note that this is a Machinist, not a Machine Operator, position. Duties and responsibilities include: Work within and support the culture of an AS9100 and ISO9001:2015 Read and understand blueprints and specifications of the complexity of the aerospace and defense shipbuilding industries. Work as a team player and stay on task as a self-starting individual. Adjust to the ever-changing workflow, cross train, and perform multiple tasks as required. Support continuous process improvement initiatives through a willingness to think creatively to solve problems and accept better ways of doing things. United States (Required) Competitive pay and benefits including a climate-controlled facility, medical, dental and life insurance, short- and long-term disability, vacation, and a 401K plan. Attention to detail is a must, as is the ability to pass drug screening. Experience: CNC Machinist: 5 years (Required) Set-Up and Operation

Job Summary:We are seeking a highly skilled and detail-oriented CNC Machinist experienced in operating multi-axis lathes, vertical turret lathes (VTLs), and 5-axis mill-turn machines. This position supports the production of precision components for defense-related electric motor systems. The machinist will be responsible for setting up machines, optimizing existing programs, and maintaining tight tolerances on materials such as steel, cast iron, and heat-resistant alloys. Key Responsibilities: Set up and operate multi-axis CNC lathes, VTLs, and 5-axis mill-turn machines to manufacture precision parts such as shafts, housings, and assemblies. Optimize existing CNC programs for performance, tool life, and part quality. Install and adjust tooling, fixtures, and offsets to ensure accurate and efficient machining. Interpret blueprints, engineering drawings, GD&T specifications, and work instructions to meet production and quality requirements. Conduct in-process and final inspections using manual metrology tools (e.g., micrometers, bore gauges, height gauges) and automated systems such as touch probes. Monitor machining operations and make real-time adjustments to maintain part conformance. Maintain accurate records for setups, inspections, tool changes, and production output. Work collaboratively with engineering, quality, and production staff to resolve issues and meet delivery goals. Perform routine preventative maintenance and assist with troubleshooting mechanical or tooling problems. Comply with all safety standards and help maintain a clean, organized, and efficient work environment. Qualifications: High school diploma or equivalent required; technical certification or formal training in machining preferred. Minimum 5 years of experience operating multi-axis CNC machines, including VTLs and/or 5-axis mill-turn equipment, in a precision manufacturing environment. Skilled in machining parts from steel, cast iron, and heat-resistant alloys (e.g., Inconel, stainless steel). Strong knowledge of GD&T, tight-tolerance machining, and quality inspection techniques. Proficient with both manual inspection tools and automated measurement systems such as touch probes. Familiarity with CNC controls such as FANUC, Siemens, or OSP (Okuma) is a plus. Experience working under ISO 9001 or similar quality management systems. Able to interpret technical documentation and work independently with minimal supervision. U.S. Person status required (to comply with defense contract requirements). Working Conditions: Clean, well-maintained defense manufacturing facility. Requires standing for extended periods and lifting materials up to 50 lbs. Use of PPE and compliance with all safety procedures is mandatory. May require occasional overtime depending on production schedules.

Job Title: CNC Machinist / Moldmaking TraineeLocation: Bloomfield, CT Salary: $ Depending on experience Hours: Full Time Duration: Permanent opportunity and Special DutiesThis is an excellent entry-level opportunity for someone who wants to build a long-term career in CNC machining and moldmaking. We are not a production shop - we do not need CNC operators who simply load and run parts. Instead, we are looking for someone with a basic understanding of CNC machining who is motivated to learn programming, precision machining, and the fundamentals of toolmaking in a high-accuracy environment.This role is ideal for: A recent technical school graduate A CNC operator who wants to grow their skills beyond production work Someone who wants to learn moldmaking, machining strategy, precision measurement, and CAM programming Your day-to-day duties will include, but may not be limited to: Assist in setting up and operating CNC milling equipment (3-axis and 5-axis) Support senior machinists, programmers, and moldmakers with tooling, setups, and part preparation Learn foundational CNC programming concepts using Cimatron and other CAM tools Learn how to read blueprints, basic GD&T, and interpret engineering drawings Inspect parts using micrometers, calipers, dial indicators, and other basic precision tools Help prepare and handle graphite electrodes and tool steel components Assist with machine clean-up, basic maintenance tasks, and workstation organization Participate in hands-on training in machining, electrode manufacturing, and moldmaking processes Demonstrate a strong desire to grow into programming, tight-tolerance machining, and complex mold builds Job Specifications Basic understanding of CNC machining required (school training or light experience) Strong mechanical aptitude and willingness to learn advanced programming and machining High interest in moldmaking, precision machining, and working to tight tolerances Ability to follow instructions, ask questions, and retain technical concepts Comfort using basic inspection tools or willingness to learn Positive attitude, reliability, and desire for a long-term career path Important: We are not looking for production CNC operators. This is not a high-volume machining environment - this is precision, craftsmanship, and learning. OpportunityThis is a long-term, career-building role. You'll be trained by highly skilled CNC programmers, EDM specialists, and moldmakers, with the goal of growing into: CNC Programmer Precision Machinist Moldmaker Electrode Machining Specialist Toolroom Technician For someone early in their career who wants to become a true craftsman - not a button-pusher - this is the perfect place to start.Company OverviewFounded in 2010, Top Prospect Group focuses on matching high-quality candidates with top clients while fostering an environment where success is shared by all. In 2023, the company was acquired by HW Staffing Solutions, expanding its service offerings to include technology and professional services across engineering, manufacturing, and operations.How to ApplyQualified candidates are encouraged to apply immediately. Please include a clean copy of your resume, salary expectations, and any references.#INDTPGSHELTON

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: Operates all types of CNC Turning machines under the direction of the area supervisor or Lead Person. Location: South Windsor, CTThis position is 100% on site. Responsibilities: Performs set-ups and operates CNC lathes and/or CNC mill turn machines and related equipment where programs, fixtures, and methods have been developed. Makes all edits and adjustments as required to produce parts to work orders/blueprint specifications/sketches. The ability to operate more than one machine in a cellular environment is required. Demonstrates a working knowledge of feeds and speeds and a working knowledge of cutting tools and their application. Inspects work for all dimensional features as required. Produces quality and quantity of work in accordance with Company requirements. Responsible for accurately completing paperwork relating to counts, scrap, time, etc according to Company policy. Performs duties always exercising good machining practices. Maintains area, equipment, and tooling in a neat, orderly condition including operator maintenance sheets. Maintains coolant tanks and fills as necessary. Assists new and less experienced operators as requested. Observes all Company policies, rules, and regulations including good housekeeping, safety and security. Required Qualifications: High school diploma or equivalent 3-5 years machinist experience Must be authorized to work in the U.S. on a full-time basis without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: Must be able to understand and follow instructions in English. Must be able to understand and interpret blueprints and sketches. Must have demonstrated mechanical ability. Physical Requirements: Requires mobility in a manufacturing plant environment while using Personal Protective Equipment. Must be able to frequently sit, stand and walk. Must be able to lift and carry up to 15 pounds. Compensations & Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Are you looking for a new and exciting opportunity to use your production support skills in a successful and growing company? If you have a desire to work in an energetic, collaborative environment and you are looking for long-term growth then check out this opportunity at Bausch + Stroebel Machine Company, Inc.! Our goal: Providing the best technical and economical answers to the challenges presented by the world market. With this clear goal in mind, we are designing and manufacturing packaging equipment for the pharmaceutical and allied industries. From modest beginnings more than 50 years ago - with a staff of only four - Bausch+Ströbel has developed into an international enterprise. It is now one of the leading manufacturers in pharmaceutical packaging equipment. We are striving to create optimal solutions for our customers. To achieve this aim, we are continually making innovations to improve products and processes. Company philosophy Our philosophy is and has always been respectful, fair and open communication with customers, partners and employees. In practice, this means: The know-how and competence of our qualified and highly motivated personnel are the basis for the success and future development of our company Teamwork in a co-operative atmosphere, job satisfaction, responsibility and willingness to make decisions are pillars of our company strategy Continuity by in-house training and targeted support of our personnel Our global network of associated companies has the advantage that we are at our customers' doorsteps Job Description This position will be responsible for setting up, operating, and maintaining ProtoTrak lathes and milling machines to produce precision parts according to technical drawings and quality standards. This role requires a strong understanding of machining principles, proficiency in interpreting blueprints, and the ability to work independently to achieve production goals. Essential Duties and Responsibilities: Produce precision quality parts machining various materials to engineering specifications (SS304, 316L, aluminum, and various plastics, etc.). Ability to read and interpret prints. Review Production Status Report and complete orders as needed. Perform your setups. Follow the checklist: shop employee pre-inspection before work step Punch job in ERP system Verify final dimensions with print, by using precision measuring instruments including micrometers, calipers, fixtures, and gauges. Perform repair and preventative maintenance on shop equipment. Must understand and comply with all safety rules and company policies. Promote customer focus Qualifications Skills: Familiar with the metric system Familiarity with G & M codes or ProtoTrak controls is a plus Ability to read prints and use measuring tools Experience in turning lathe is a plus Competencies: Quick learner to become proficient at editing programs and controls Work independently Highly dependable with an excellent attendance record is required Requirements: 3 to 5 years of experience Must be a US citizen or a permanent resident Relocation assistance is not available for this position Education: High School Graduate or GED. Preferably from a vocational-technical high school, the completion of an apprenticeship program, or a community college/technical school training program. Work Environment: The noise level in the work environment is usually moderate in the manufacturing shop environment. In addition to competitive compensation, you will enjoy working in a well-lit, climate-controlled environment and be provided with company-paid uniforms. Additional Information Position Type: This is a full-time (non-exempt/hourly) position. Compensation will be based on experience. Non-exempt employees will receive overtime pay at 1.5 times the calculated hourly rate for time worked in excess of 40 hours per week. Hours: First Shift, M-F, 7:00 am - 12:00 pm and 12:30 pm - 3:30 pm - Overtime is possible Benefits: We offer medical and dental plans (company pays 83% of the premium for employees and eligible dependents); company-paid short term and long term disability plans, company-paid life insurance and AD&D plans; voluntary vision plan; voluntary life and dependent life plans at discounted group rates; a 401(k) plan with a 4% safe harbor company match, company paid holidays and generous paid time off plan (starting with 18 PTO days per year and increasing accrual rate every 2 1/2 years). Home Office / Travel: This position is located at our US headquarters in Branford, CT. This position requires no travel. If you meet the qualifications and feel this position is a good match for your skills and interests please send your resume and a cover letter including your hourly requirement. Bausch + Stroebel's US Headquarters is located in Branford, CT ********************** ********************************** Bausch + Stroebel is an Equal Opportunity Employer

Job DescriptionM&S Machine & Tool is now hiring for a CNC Setup position. As an AS9100 job shop, our focus is precision machined components and the individual we seek will serve a key role within the company. REQUIREMENTS Must have proven experience with CNC setups. Lathe and MIll experience is preferred. Candidate is proficient with setting tools, securing and locating fixtures, inputting proper offsets to produce conforming product. Knowledge of G&M-code is necessary. Programming experience is a plus as we operate with MasterCam software. The ability to use accurately use precision measuring instruments and input offsets accordingly is essential. The right individual will be detailed oriented. Comfortable working independently and as a team player. Other skills set such as grinding, manual machining, and working with assemblies will also be considered. Pay varies significantly DOE Benefits include Health Care, Retirement, PTO

Job Description Let your career take flight!Howmet Aerospace is growing and is now looking to fill CNC Machine Operator Trainee positions in our Winsted, CT location. Salary Minimum starting salary $21.00 Higher salary based on skills. Shift differentials: 2nd shift/ $2.00, 3rd shift $3.00 - Ability to train on 1st shift for several months if needed. External hires are eligible for a $3,000 sign on bonus. Benefit package includes, Medical, Dental, Visual, Vacation, and more. Excellent 401K match Growth Potential Referral Bonus Program Job Summary As a Machine Operator Trainee, you will learn to set-up, operate and maintain at least one CNC process machine (rotary, surface grinder, etc.) meeting both safety and production requirements. Maintain all quality and production records and assist with training as required. Essential Functions Learn to perform machine set-up and wheel changes in assigned workstation within standard set-up times. Maintain all quality and production records including tooling calibration, daily walk around, etc. Maintain productivity, utilization, schedule and quality records and comply with all standards. Perform in process inspection. Job Responsibilities Maintain 6S and other area housekeeping standards. Execute clean-up shift procedures. Maintain visual control boards and hour X hour charts. Participate and actively promote continuous improvement activities. Follow policies and procedures as outlined in Employee Handbook Actively participate, promote and comply with all Quality and EH&S programs and policies. Achieve and maintain certified status. Maintain acceptable attendance. Perform all other job duties as assigned. This is an exciting opportunity to grow with us.Apply today to see if you qualify for the Machine Operator Trainee opportunity! Qualifications: Education:High school diploma or GED Skills and Abilities Use of addition, subtraction, multiplication and division of numbers including decimal and fractions; simple use of formulas, and charts tables. Knowledge of blueprints, drawings, specifications, and writing diagrams. Computer scanning devices. Use of adjustable measuring instruments. checking of reports, forms, records and comparable data; interpretation is required involving basic skills knowledge. Ability to plan, perform and make decisions as to the sequence of set-ups, operations and processes. Ability to interpret and follow instructions, prescribed routines, methods and practices. Experience Experience (1-2 years) in machine operation preferred. Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. You should be proficient in: CNC Tooling Troubleshooting Skills Machine Setups for Production Runs Machines & technologies you'll use: Measurement Gauges CNC Mill (5+ axis VMC) CNC Lathe (5+ axis) Horizontal Machining Center (5+ axis) OD/ID Grinding Machine

Job DescriptionBenefits: 401(k) Competitive salary Dental insurance Paid time off Vision insurance Small job shop seeking well-established, permanent employee with a minimum of 5 years experience. The ideal candidate will be capable of single piece jobs, small run prototype and secondary operation production. Experience in turning, milling, blue print comprehension and inspection equipment is essential. Familiarity with aluminum, 300 series stainless and plastic is desirable. Salary negotiable, depending on experience.

Job DescriptionSenior CNC Machinist - Aerospace | $27 - $33/hr | Hartford CountyFull-Time | 1st Shift | Contract-to-Hire | Precision Job Shop Are you a highly skilled CNC Machinist with extensive Mazak and lathe experience? Join a leading aerospace precision shop where your expertise in programming, setup, and machining low-volume, high-mix parts will be valued and rewarded. What You'll Do: Set up and operate CNC lathes (Mazak) in a precision aerospace environment Perform conversational programming and read/interpret complex blueprints Troubleshoot machining issues and ensure first-pass quality Work with tight tolerances using calipers, micrometers, bore gauges, and other inspection tools Produce small batch, custom parts with an eye for detail and accuracy Collaborate with the team to improve processes and meet production timelines What We're Looking For: 10+ years of CNC machining and programming experience Hands-on experience with Mazak CNC lathes and conversational controls Strong blueprint reading and GD&T interpretation skills Proficiency with inspection tools and precision measuring instruments Background in aerospace or other precision manufacturing Ability to work independently and troubleshoot on the fly Compensation: $27 - $33/hr, based on experience Opportunity for contract-to-hire with a stable, growing company Full benefits package including 401K match If you're a seasoned machinist looking for a shop that values quality, precision, and experience - we want to hear from you. Apply Today! A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws.

Senior CNC Machinist - Aerospace | $27 - $33/hr | Hartford CountyFull-Time | 1st Shift | Contract-to-Hire | Precision Job Shop Are you a highly skilled CNC Machinist with extensive Mazak and lathe experience? Join a leading aerospace precision shop where your expertise in programming, setup, and machining low-volume, high-mix parts will be valued and rewarded. What You'll Do: Set up and operate CNC lathes (Mazak) in a precision aerospace environment Perform conversational programming and read/interpret complex blueprints Troubleshoot machining issues and ensure first-pass quality Work with tight tolerances using calipers, micrometers, bore gauges, and other inspection tools Produce small batch, custom parts with an eye for detail and accuracy Collaborate with the team to improve processes and meet production timelines What We're Looking For: 10+ years of CNC machining and programming experience Hands-on experience with Mazak CNC lathes and conversational controls Strong blueprint reading and GD&T interpretation skills Proficiency with inspection tools and precision measuring instruments Background in aerospace or other precision manufacturing Ability to work independently and troubleshoot on the fly Compensation: $27 - $33/hr, based on experience Opportunity for contract-to-hire with a stable, growing company Full benefits package including 401K match If you're a seasoned machinist looking for a shop that values quality, precision, and experience - we want to hear from you. Apply Today! A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws.

Job Description At AeroFlow Technologies, we specialize in creating complex tube and duct assemblies using high-performance materials capable of withstanding extreme pressure, temperature, and chemical interactions. You can even find our products aboard NASA's Space Launch System and in the F-35 fighter jets. That's the level of quality and innovation you'll be part of when you join our team. We are seeking a Toolmaker to plan and execute complex manufacturing jobs (such as tools assemblies, etc.). This position may also participate in activities in support of quotations for customers. So, what will you be doing as a Toolmaker? Plan and execute manufacturing jobs to meet customer requirements. The level of planning will vary depending upon the customer and internal requirements. However, toolmakers will be capable of Translating customer engineering documents (drawings, specifications, etc.) into logical processes to complete tasks Identifying material requirements and outside service provider requirements and communicating same to appropriate internal personnel. Inspecting parts, tools and paperwork, to ensure customer requirements are met. Completing inspection paperwork as necessary. Establishing a schedule of processes to meet customer delivery requirements. Coordinate with other departments (engineering, production planning, quality, etc.) as necessary to meet customer requirements. Reading, interpreting and producing engineering drawings (both by CAD and by hand), specifications, limits, fits, and computer-generated information in order to determine what has to be produced and to what specification. Selecting and using a range of measurements and testing equipment to check components are to required quality and accuracy. Understanding the structure, properties and characteristics of common materials used for the manufacture and repair of tooling, mold, dies, jigs and fixtures. Understanding and demonstrating the safe operation, correct selection and skilled usage of a range of hand tools used for toolmaking and die maintenance, including grinders, drills, and stones. Understanding the safe operation and theory of the range of complex and often state-of-the-art workshop machinery used such as (CNC lathes, milling, grinding, drilling and welding equipment) and how to set up and operate the machinery and equipment efficiently and effectively. Apply and understand the methods and techniques used to assemble and disassemble tools, jigs and fixtures. The basic principles of how the relevant tools, jigs and fixtures being manufactured/maintained function, the operating sequences, the purpose of individual components/systems and how they interact. The theory and application of pneumatics, hydraulics, electrical and electronic systems as applied to various molding, injection, pressing and similar associated machinery. Complying with statutory, quality, organizational and health and safety regulations while carrying out manufacturing techniques. Testing to confirm correct operation and of the effectiveness of repairs and maintenance activities carried out. Obtaining, checking and using the appropriate documentation (such as job instructions, drawings, quality control documentation and hand over documentation). Properly use the MRP system to record job information To be successful in this role, you'll need: A genuine belief in continuous improvement and disciplined processes. A willingness to analyze, challenge and change processes, if needed, to create a more efficient environment culture. Job requires being detail oriented and thorough in completing work tasks. Dependability - Job requires being reliable, responsible, dependable, and fulfilling obligations. Integrity - Job requires being honest and ethical. Organizational and time management skills. Self-starter with ability to multi-task and prioritize workday/projects independently. Excellent interpersonal and communication skills. High School Diploma Toolmaker Apprenticeship or 5 years of tool making experience Reasons You'll Love It Here We offer a full suite of employee benefits such as medical, dental, and vision insurance; as well as paid vacation, paid personal time, and various opportunities to give back to your local community. We also strongly encourage and provide opportunities for learning and professional development. Our Learning & Development team has put together in-house training on subjects like front-line supervisor essentials, how to manage conflict in the workplace, and many others. What to Do Next Now that you've had a chance to learn more about us, what are you waiting for! Apply today and allow us the opportunity to learn more about you and the value you can bring to our team. Once you apply, be sure to create and sign up for job alerts, so you can be the first to know when new opportunities become available. Our Commitment to You We're proud of the fact that we are strongly rooted in being an inclusive, people-focused organization. Our company culture reflects values like integrity, ownership, and authenticity. We take these to heart, and if you do as well, you'll fit right in. AeroFlow Technologies is committed to the full inclusion of all qualified individuals. In keeping with our commitment, Leggett & Platt Inc. will take the steps to assure that people with disabilities are provided reasonable accommodations. Equal Employment Opportunity/Affirmative Action/Veteran/Disability Employer For specific regional privacy notices please refer to our Privacy Policy.

Prototype Machinist - LiquidPiston Department: Machine Shop Employment Type: Hourly LiquidPiston is developing advanced rotary engine technologies that redefine what is possible in power generation and propulsion. Our team designs and builds cutting-edge prototypes that push the boundaries of efficiency, performance, and size. We are seeking a highly skilled Prototype Machinist to support our rapid development and testing initiatives. Position Summary: The Prototype Machinist will be responsible for machining precision components for engine prototypes and test fixtures. This role requires strong CNC programming and machining experience, exceptional attention to detail, and the ability to work in a fast-paced R&D environment. The ideal candidate is hands-on, self-driven, and comfortable working with both CNC and manual equipment. Key Responsibilities Program, set up, and operate CNC milling machines and lathes, with an emphasis on multi-axis milling. Utilize Haas and Fanuc controls to execute complex machining operations. Create and optimize machining programs using MasterCam (preferred). Produce high-precision prototype components from engineering drawings, 3D models, and sketches. Inspect parts to ensure dimensional accuracy and quality standards are met. Operate manual machine tools, including: Surface grinder Bridgeport mill Manual lathe Collaborate closely with engineers, designers, and technicians to refine prototype designs. Maintain a safe, clean, and efficient work environment. Assist in developing machining processes, tooling selections, and fixture designs for prototype builds. Required Qualifications Proficiency operating and programming CNC mills and lathes; experience with multi-axis milling strongly preferred. Strong working knowledge of Haas and Fanuc controls. Experience programming and tool-pathing using MasterCam (preferred but not required). Demonstrated ability to operate manual machine tools (surface grinder, Bridgeport, manual lathe). Ability to read and interpret complex mechanical drawings and GD&T. Strong problem-solving skills and the ability to work independently on prototype projects. High attention to detail and commitment to quality. Benefits & Perks PTO: We value work-life balance and encourage time to rest and recharge. Our benefits include 3 weeks of PTO (which covers vacation and sick time) plus 10 paid holidays. Health & Wellness: Comprehensive medical and voluntary dental, and vision coverage - you choose what works best for you. Equity Participation: Employes may receive RSUs (Restricted Stock Units). 401(k) Match: We offer a 401k w/100% matching up to 3% of your salary and then 50% of contributions between 3-5% after 1 year of employment. Career Growth: Ongoing training, mentorship, and learning opportunities to accelerate your growth. Our Culture At LiquidPiston, we embrace challenges, move fast, and celebrate curiosity. Our team thrives on collaboration, creativity, and perseverance. We understand that innovation involves risk-and we're not afraid to fail as we move forward. Equal Opportunity Employer LiquidPiston, Inc. is proud to be an Equal Opportunity Employer. Qualified applicants will not be discriminated against, and receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, or protected veteran status or disability. All offers of employment at LiquidPiston are contingent upon successful completion of a pre-employment background check and drug screening.

Company: Mott is a technology driven, high precision filtration company trusted by the world's best technical and performance brands across four core markets: Medicine, Computing Power, Clean Energy, and Space Exploration. Our products can be found everywhere…including lifesaving medical devices, artificial intelligence, and missions to Mars! The company's strategic vision is to deliver technological breakthroughs where none currently exist. Established in 1959 and located in Farmington, Connecticut (90 miles from NYC and Boston), the company has doubled in size over the last 5 years. Mott is poised for significant expansion over the next 5 years . Role Summary We are seeking an exceptionally skilled and adaptable High-Precision Machinist to join our fast-paced Rapid Prototyping Cell. This role is critical for the rapid development and iteration of complex, high-tolerance components, primarily supporting the Aerospace, Defense, and Semiconductor industries . The ideal candidate thrives in an environment of changing priorities, possesses deep expertise in multi-axis machining, and maintains a relentless focus on quality and safety. This position requires a strong collaborative spirit to bridge the gap between initial design and scalable production. Key Responsibilities Precision Machining: Independently program, set up, and operate a range of machining equipment to produce intricate parts with extremely tight tolerances, often involving exotic materials. Multi-Axis Operation: Expertly operate and maintain 5-axis+ milling and turning machining centers to produce complex geometries. Rapid Prototyping: Execute quick-turn jobs on both advanced CNC equipment and conventional milling, turning, and grinding tools, to support urgent R&D, Product Development and Engineering needs. Cross-Functional Collaboration: Act as the primary subject matter expert in machining for the prototyping phase, effectively communicating with Process Engineering, Project Managers, Quality Control (QC), and R&D teams to ensure design intent and manufacturability are achieved. Scalability Recommendations: Analyze prototype processes and recommend improvements or adjustments to machining strategies to ensure the final component design is scalable and cost-effective for high-volume production. Quality Assurance: Conduct rigorous in-process and final inspections using precision measurement tools to verify compliance with stringent aerospace, defense, and semiconductor quality standards. Adaptability & Time Management: Demonstrate exceptional time management and multitasking skills to handle multiple concurrent projects and quickly pivot to accommodate urgent, shifting priorities. Safety & Teamwork: Champion a strong safety mentality within the cell and contribute positively to a collaborative, high-performance team environment . Required Qualifications Experience: Minimum of 5 years of hands-on experience in high-precision, close-tolerance machining, preferably within the aerospace, defense, or semiconductor sectors. Technical Mastery: Proven operational and programming proficiency (CAM software) with: 5-Axis Milling Machines Twin Spindle Turning Centers Bridgeport-style conventional milling machines Industry Knowledge: Practical experience manufacturing components for demanding sectors, specifically Aerospace, Defense, and/or Semiconductor. Soft Skills & Collaboration: Demonstrated track record of successful interaction and partnership with diverse internal departments (Engineering, Quality, Management) to drive project completion. Work Ethic: Proven ability to work in a fast-paced, rapid-turnaround environment and maintain composure and quality under pressure. Preferred Qualifications (Added Benefit) Experience operating and setting up Electrical Discharge Machining (EDM) equipment (Wire or Sinker EDM). Certification or advanced training in CNC programming and metrology. Familiarity with ISO 9001 and AS9100 quality management systems.

Job Title: Machinist CNC Department: Operations Reports To: Component Repair Supervisor FLSA Status: Hourly Non-Exempt Direct Work Hours: 7:00AM - 3:30PM SUMMARY Responsible for performing various machining operations on overhaul component parts in accordance with WGPW established methods and practices. ESSENTIAL DUTIES AND RESPONSIBILITIES The position includes but is not limited to the following essential duties and responsibilities. Machine parts to specifications using CNC vertical turret lathe and or CNC lathe. Develop CNC machining programs including tool selection and calculation of appropriate speed and feeds using Fryer Siemens controls. Create an assortment of CNC tools to perform basic and complex machining operations. Set up and operate CNC machine tools and many specialized or advanced variation tools in order to perform precision machining operations. Use and interpret appropriate technical data, including but not limited to travelers, blueprints and other technical data as provided. Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers, vernier calipers, indicators, and swing gages. Measure, examine, and test completed components in order to detect defects and ensure conformance to specifications, using precision measurement equipment. Communicate with Supervisors, Peers, or Subordinates -- Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person. Handling and Moving Objects -- Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things. Monitor Processes, Materials, or Surroundings -- Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems. Follow safety rules and guidelines. Equipment Selection - Determining the kind of tools and equipment needed to do a job. Troubleshooting - Determining causes of operating errors and deciding what to do about it. Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the Knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to read and interpret appropriate technical data, including but not limited to travelers, blueprints and other technical data as provided. Must have good mechanical skills, a high level of manual dexterity including hand-eye coordination and the ability to accurately use precision measuring tools such as micrometers, calipers, and dial indicators. Must be able to effectively and safely use manufacturer's special tooling and lift and turn equipment. EDUCATION and/or EXPERIENCE 3+ years of previous experience in the operation of CNC machines and tools, including their designs and uses. Experience in the overhaul and repair of aviation components preferred. PHYSICAL & ENVIRONMENTAL DEMANDS While performing the duties of this job, the employee is regularly required to stand, and use hands to finger, handle or feel objects, tools, and controls. The employee is occasionally required to walk, sit, reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee may be exposed to moving mechanical parts, fumes, airborne particles, solvents, and oils. Wood Group Pratt & Whitney is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Title: CNC Machinist Company: Biomerics Position Type: Full-time Employee Hourly Rate: $20.00 - $40.00, depending on experience. CNC Machinist (Willemin- our models) 2nd and weekend shift available Second shift hours - 5PM-1AM Weekend shift hours - Flexible Swiss Machinist (Tsugami & Citizen- our models with laser capabilities) 2nd and 3rd shift available Second shift hours - 2:30PM-10:30PM Third shift hours - 10:30pm-6:30am Competitive Salary & Benefits Biomerics provides contract manufacturing, laser processing, and finishing services to a wide range of industries with a strong commitment to customer service. Biomerics specializes in the most challenging machined and micromachined components, including those used in interventional and medical robotics applications. We pride ourselves on providing a supportive, positive work environment with opportunities for challenge and growth. Biomerics offers Swiss machining with integrated laser cutting on precision medical tubing. Laser/Swiss machining enables features to be machined and laser cut in the same process. Our core competency lies in smaller medical components, produced with high accuracy and repeatability. Traditional Swiss screw machining capability is also available for rapid prototyping and production. In addition, Biomerics utilizes five axis milling machines capable of producing complex finished components, while holding extremely tight tolerances. Job Description: Biomerics has immediate openings for talented CNC Machine Operator at our facility in Monroe, CT. Working in a team environment, this individual will ensure that automated manufacturing processes are producing optimal results. Representative Responsibilities: Prepare and operate machines to perform tasks such as drilling, grinding, milling etc. Understand specifications of the task at hand and the desired result by reading blueprints, mechanical drawings etc. Translate instructions into computer commands so the machines can perform the correct function. Prepare and load raw materials onto the machines. Set up and run first pieces to verify that the machines produce outputs according to specifications. Supervise the machines while they execute the tasks and make any necessary adjustments to produce a better result. Inspect and measure finished products and compare them with requirements to determine if the process has been completed properly. Requirements Desired Skills, Talent, and Qualifications: Knowledge of machine shop equipment and practice, (actual machining experience a plus) Previous experience working in a manufacturing setting is preferred but willing to train the right candidate. Must have strong attention to detail. Familiarity and skill with interpreting technical drawings and blueprints Ability to work independently and closely follow directions is essential. "Equal Opportunity Employer: Minority, Female, Protected Veteran, Individual with Disabilities are encouraged to apply." Benefits: Medical/Dental/Vision Insurance, Short-Term Disability, Long-Term Disability, Life Insurance, Paid Vacation Days, Paid Holidays, 401k Please, No Recruitment Agency calls or emails (we are not using recruitment services for this, or any other role posted). Biomerics does not accept non-solicited resumes or candidate submittals from search/recruiting agencies not already on Biomerics approved agency list. Unsolicited resumes or candidate information submitted to Biomerics by search/recruiting agencies not already on Biomerics approved agency list shall become the property of Biomerics and if Biomerics subsequently hire the candidate, Biomerics shall not owe any fee to the submitting agency. The salary estimates are estimates from this job board and not a guarantee from Biomerics salary range. Salary Description $20-$40