Computer numerical controller machinist jobs in South Bend, IN - 84 jobs

Responsibilities Set up and run CNC machine (Makino's/Okuma's) holding tight tolerances as low as +/- .002. Ability to interact with computer-based controllers to enter or edit job offsets/programs. Operations performed include, but are not limited to, indicating of fixtures, offsetting of fixtures, milling, drilling, and grinding (of interior diameter) while maintaining specific tolerances and measurements. In addition to machining, operator also air weighs and uses CNC etching machine to etch permanent serial number on discs following each machining cycle. Work must be completed within specific timeframes depending on production schedules. Processes also involve using, reading, and interpreting gages such as, but not limited to, hand gages, hard gages, CMM's, and touch-off probes to complete and validate work. Understand and interpret complex blueprints, specifications, and operating instructions before and while running operations. Inspect parts, ensuring product meets specified quality standards. Responsible to complete related quality documents/work instructions upon completion of tasks. Demonstrate safe work habits. Maintain equipment and work area in a clean and orderly manner using the standard work outlined for the area. As a team member, demonstrate the ability to troubleshoot and resolve problems leading to continual process improvements and effectiveness of the team. Qualifications YOU MUST HAVE High School graduate or equivalent experience Due to Federal regulations, candidate must be either a US Citizen or a Lawful Permanent Resident 3+ years experience of setting up & operating CNC equipment In lieu of 3 years of set-up & operation experience, an associates machining technology degree is acceptable. Computer skills that demonstrate the ability to use CNC interfaces to read, run and edit computer-based machine job programs Math skills that demonstrate a basic understanding of arithmetic Basic reading and writing skills Ability to read and understand blueprints and measuring gages Ability to lift up to 35 pounds Possesses solid teaming and communication skills Excellent attention to detail and can follow written, verbal, standard work instructions Good time-management skills Ability to focus on quality while executing job tasks The annual base pay for this position is $31.14/hour to start, $31.64/hour after qualifying, with a $0.75/hour differential for 2nd/3rd shift. Please note that this salary information serves as a general guideline. Honeywell considers various factors when extending an offer, including but not limited to the scope and responsibilities of the position, the candidate's work experience, education and training, key skills, as well as market and business considerations. This position is a 2nd or 3rd shift role. U.S. PERSON REQUIREMENTS Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. citizen, U.S. permanent resident, or have asylum or refugee status in the U.S. The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Posting Updated 9/30/25. BENEFITS OF WORKING FOR HONEYWELL In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: benefits.honeywell.com

Schafer Industries is a premier supplier of off-highway axles and differentiated precision gearing solutions. Established in 1934, Schafer Industries has locations in South Bend, IN, Roscoe, IL, Fredericktown, OH and Blacklick, OH. Schafer Industries is one of the few manufacturers of integrated axle solutions in the off-highway electric vehicle market. Schafer serves customers in a variety of end markets including off-highway vehicles, recreational vehicles, aerospace, defense, oil & gas, material handling, powertrain, electric mobility, heavy duty trucking, agriculture, and construction. Our mission is to leverage world class capabilities to deliver superior products and services to maximize the value for our customers, employees, shareholders, and communities. Why Work at Schafer Industries? We are a growth-oriented company with a diversified customer base. We are committed to a culture of safety and continuous improvement. You will enjoy a collaborative work environment where your talents and opinions matter. We provide training as well as opportunities to work on projects in support of your career development. You will quickly see your impact when working with the team. We live our values of Safety, Integrity, Responsibility to Others, Customer Focus, Continuous Improvement and Accountability in all that we do. We have competitive pay and benefits to include 401(k) match and tuition reimbursement. Job Summary Sets up and operates conventional, special purpose, and computer numerical control (CNC) machines to fabricate metallic and non-metallic parts. Responsible for solving machine and part problems, maintains a high productivity rate and constantly strives to improve productivity. Essential Functions: Operate assigned machinery to fabricate parts to the required specifications by: Reading work orders and specification sheets before starting the machine. Properly powering up and down the machine. Loading and unloading parts. Ensuring proper tooling for each machine. Changing vise jaws, collets in indexer, and other work holding devices Removing and installing tools from tool magazines Knowing different types of mills, drills and other tooling. Adjust and operate numeric and computer numeric controlled machining centers. 2. Ensures all parts are to the required specifications by: Maintaining and continuously improving the quality of parts produced. Reading blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations, and setup requirements. Verifying conformance of finished work piece specifications. Complying with all work instructions. Following and maintaining ISO/AS9100 and Schafer procedures. Completing Schafer's quality certification requirements for assigned area. 3. Ensure the operational effectiveness of all assigned equipment by: Conducting all assigned and necessary preventative maintenance procedures. Starting and observing machine operations to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required. Installing replacement parts in machines and equipment and testing operation of unit to ensure functionality and performance. Conferring with engineers, production personnel, programmers, or others to resolve machining problems. 4. Responsible for supporting the Schafer Business Process by: Maintaining and continuously improving productivity of assigned machines. Measuring dimensions and reference points on material or work piece as guides for subsequent machining. Continuously looking at tool life and new tooling to cut costs on tools. Reducing downtime of machines setups Getting computer setup ready by preparing tooling, fixtures, steel, gages, etc Maintaining the 6S program in assigned area. 5. Contributes to the overall effectiveness of the company by: Channeling problems and/or complaints to appropriate person for resolution. Supporting all Schafer policies and procedures. Reporting to Supervisor when assignments cannot be completed. Providing input and assistance with the implementation of quality improvements. Resolving problems. Performing other job-related duties as required. Helping evaluate job applicant's knowledge for the cell prior to Schafer hiring. Passing along vital information for subsequent shifts. Training new personnel in the operation of assigned machines. Assisting and/or training in other machine center cell areas as needed. Knowledge, Skills, Abilities Requires physical ability and stamina to perform the essential functions of the position, including the ability to walk, stand, lift, carry up to 40 pounds, push, kneel, bend, stoop, reach over and under waist level, twist for extended periods of time on cement or other hard surfaces, etc. Demonstrates the verbal and written communication skills necessary to complete forms and take messages in a legible, accurate manner. Two-year certification from technical school and/or. Two years of experience in set-ups and running of production. Must be able to communicate in English. Ability to use a computer. Working Conditions: Air conditioned/heated manufacturing facility with possible exposure to noise; dust; fumes; physical, chemical, and biohazards; solvents, oils, and detergents. This job is to be performed at the designated facility 100% of the time unless directed otherwise by manager/supervisor. Schafer Industries is an EEO/AAP Employer: Our company is committed to providing equal employment opportunity. This means that we make employment decisions on the basis of job-related qualifications, skills and abilities and not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other basis protected by law. As a federal subcontractor, we also are required to take affirmative action, or proactive measures, to prevent discrimination. #IND1

Primary skills and responsibilities: Five years' experience as a CNC Machinist I Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T). Programs mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Sets-up mills and lathes by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; tramming heads. Verifies settings by measuring positions, first-run part, and sample work pieces; adhering to international standards. Maintains specifications by observing all machining operations; taking measurements; detecting malfunctions in the program; troubleshooting processes; adjusting and reprogramming controls; replacing worn tools. Maintains safe operations by adhering to safety procedures and regulations. Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs. Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs. Documents actions by completing production and quality logs. Updates job knowledge by participating in educational opportunities; reading technical publications. Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. Aerospace experience a plus Follow quality standards to ensure parts are to the customer and company standards Ability to work idependently, building fixtures, tooling and develope programs Other responsibilities may be added or assumed based on necessity

Masterbilt INC is a leader in precision manufacturing, known for our commitment to quality and innovation. We're currently seeking a skilled CNC Machinist to join our team in South Bend, IN. If you're passionate about producing high-quality products and thrive in a dynamic environment, we want to hear from you! Overall Purpose: As a CNC Machinist (Swiss), you will play a crucial role in our manufacturing process, operating computer numerical control (CNC) machines and ensuring the production of top-quality products. Your expertise will help us optimize workflow and achieve our business goals efficiently. Essential Job Functions & Expected Outcomes: Read part blueprints and documentation to understand machining parameters and programs. Determine machining processes from print to part. Select, align, and secure work holding, cutting tools, and materials on CNC Swiss machines. Operate machines by loading and unloading parts, adjusting settings, and monitoring processes. Maintain specifications by observing operations, troubleshooting processes, and replacing worn tools. Verify finished work-piece conformance to specifications using measurement tools. Maintain a safe and clean work environment, adhering to safety procedures and regulations. Document production and quality logs, and collaborate with engineers to resolve machining problems. Requirements Requirements: Education: High school diploma or equivalent. Minimum 2 years in manufacturing and Swiss CNC machining is “A MUST” Functional Skills: Strong attention to detail, mechanical aptitude, familiarity with CNC machining principles, ability to interpret technical drawings and blueprints, and knowledge of lean manufacturing principles. Technology Aptitude/Skills: Proficient at Star, Spring, or Tsugami CNC machines (preferred). Language Skills: Excellent verbal and written communication. Leadership/Behaviors: Solid collaboration skills, openness to new ideas, positive attitude, flexibility, versatility. Culture Match Behaviors: Respectful, honest, accountable, good listener, agile, optimistic. Physical Requirements: Ability to operate a motor vehicle for travel. Ability to stand for up to 8 hours, sit at a desk, operate a keyboard and computer screen, communicate effectively, and perform various physical tasks. Ability to lift up to 75 lbs. sporadically. Join Our Team: If you're ready to join a dynamic team and contribute to our success, apply now! Send your resume to [email protected] or visit our website for more information. Masterbilt INC offers competitive compensation, opportunities for growth, and a supportive work environment. Don't miss this chance to be part of our innovative team! #CNCMachinist #PrecisionManufacturing #JoinOurTeam

Full-time Description • Set up and Operate CNC Mills and/or Lathes to produce parts to print • Change cutting tools & inserts as needed • Conduct in process inspections as required • Complete basic machine maintenance such as filling fluid and changing filter • Conduct tasks in accordance with company work instructions. • Ensure work area is neat and clean • Other duties as required. • Programming and/or setup experience desired Requirements Requirements • 2 + years of experience operating Mills and/or Lathes. • 2 + years experience in a manufacturing environment, preferably that makes parts or product for the aerospace industry. • Ability to read and understand blue prints, work instructions and use standard machine shop tools and gages. • Must have great communication skills in English (both verbal & written) • Good interpersonal skills and ability to work effectively with others. • Must be self-motivated and able to work independently on assignments with minimal oversight or direction. • Ability to interact effectively with management and other team members • Ability to work overtime as required.

Job Title: CNC Machinist Hours: Monday-Friday, 6:00 AM-2:30 PM (with possible OT) Pay: $20.00 (Based on experience) We are seeking an experienced CNC Machinist for a full-time production role. The ideal candidate must have strong knowledge of CNC Mills and lathes, experience using calipers and micrometers (down to .0001), and the ability to read blueprints. A stable work history is required, as we are looking for a long-term team member.Key Responsibilities: Set up and operate CNC Mills and lathes Ensure precision using calipers, micrometers, and other measuring tools Read and interpret engineering blueprints Maintain quality and safety standards Perform routine machine maintenance and troubleshooting Requirements: Proven CNC Machinist experience Proficiency with precision measuring instruments Ability to stand for 8-hour shifts and lift 40 lbs Full-time availability with potential overtime This is a long-term opportunity with competitive pay. One position available-apply now!#Elkhart

Enprotech Industrial Technologies is the largest supplier of repair, rebuilding, and field services for the metal forming and steel industry in North America and part of the ITOCHU family of companies. At Enprotech we are committed to providing team members with a safe and inclusive place to work. We value each individual for who they are, what they bring to the table, and respect each other's ideas and contributions. Our core values drive our culture and commitment to our team members. We demonstrate this through every interaction with our team members, as we live out our core values. We are looking for team members that demonstrate these values both at work and in our personal lives. SAFETY | CAN-DO-ATTITUDE | URGENCY | PASSION |INTEGRITY |TEAMWORK | COMMUNITY Is this you? If you want a position to accelerate your career growth, and one where you can make a real impact on our people, our customers, and the business, this is the role for you! Position Summary & Objective Set-up and operate CNC/Manual Lathe or Mill to produce precision parts and instruments. Plans CNC program to control contour-path machining of parts on automatic machine tools. Essential Functions Performed by the Position Read, interpret, and follow basic blueprints, diagrams, engineering drawings, and other written instructions. Requires knowledge of computers, electronics, computer numerical controls, basics of CNC programming, and computer-aided manufacturing. Analyzes drawings, sketches, and design data of parts to determine dimension and configuration of cuts, selection of cutting tools, and machine speeds and feed rates according to knowledge of machine shop processes, part specifications, and machine capabilities. Set-up and operate CNC lathes and/or mills. Set-up parts to be machined with a wide range of size and configuration in the most efficient manner of processing. Machine parts to prints per specified tolerances. Determines reference points and direction of machine cutting paths. Computes angular and linear dimensions, radii, and curvatures, and outlines sequences of operations required to machine parts. Perform quality work checks to ensure the product meets quality standards using in-process inspection tools and devices. Work with engineers to produce quality parts to engineered specifications. Writes instruction sheets and cutter lists to guide set-up and operation of machine. Writes program of machine instructions to regulate movement of machine along cutting path. Compares computer printout with original program sheet to assure accuracy of machine instructions. Revises programs to eliminate instruction errors or omissions. Observes operation of machine on trial run to prove programmed instructions. Fills out quality and inspection paperwork. Qualifications Knowledge, Skills, and Abilities Possess the physical strength and ability to properly handle tooling, and to safely set-up large work pieces. Must own tools of the trade, and the ability to use them effectively. Ability to operate overhead cranes and forklifts. Ability to meet production requirements as specified. Apply shop math with the understanding of geometric tolerance and dimensioning. Ability to work with engineers and inspectors to produce quality parts to customer's specifications. Strong math aptitude. Ability to use precision measuring instruments (calipers, micrometers, and other gauges). Ability to use a feed and speed chart or a calculator. Understanding of metal properties and appropriate cutting tools, appropriate feed rates, speeds, and depth of cuts. Ability to program and operate CNC controls. Ability to machine parts to specific tolerances. Ability to verbally communicate with team members, supervisors, and engineers. Able to work with coolant, solvents, and grease. Ablility to program/set up a Mazak machine Required Education and Experience High school diploma or equivalent. Five years' experience in operating CNC lathes and/or mills. Blueprint reading a plus. Environment and Working Conditions Shop environment Hours Based on business needs Travel Requirements (percent) Up to 10% Disclaimer This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Additional Information The benefits of joining our team Because we seek to hire the best people, we work hard to provide benefits that make their lives better, so we offer a comprehensive benefit program which features: Health coverage for you and your family through medical, dental and vision plans 401(k) plan in with a generous company match Financial protection through disability, life, and accidental death & dismemberment insurance plans Tax advantages through flexible spending accounts that allow you to pay for specific health-care and dependent care expenses with pre-tax dollars Generous paid time off program in which the benefits increase along with your tenure with the company When you join our team, you do more than simply switch companies to progress your career. You become part of our family, a group of talented women and men who drive business success. #IND1 Industrious Group and its subsidiaries is an equal opportunity employer. All applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. All employment decisions are made based on qualifications, merit and business need.

Enprotech Industrial Technologies is the largest supplier of repair, rebuilding, and field services for the metal forming and steel industry in North America and part of the ITOCHU family of companies. At Enprotech we are committed to providing team members with a safe and inclusive place to work. We value each individual for who they are, what they bring to the table, and respect each other's ideas and contributions. Our core values drive our culture and commitment to our team members. We demonstrate this through every interaction with our team members, as we live out our core values. We are looking for team members that demonstrate these values both at work and in our personal lives. SAFETY | CAN-DO-ATTITUDE | URGENCY | PASSION |INTEGRITY |TEAMWORK | COMMUNITY Is this you? If you want a position to accelerate your career growth, and one where you can make a real impact on our people, our customers, and the business, this is the role for you! Position Summary & Objective Set-up and operate CNC/Manual Lathe or Mill to produce precision parts and instruments. Plans CNC program to control contour-path machining of parts on automatic machine tools. Essential Functions Performed by the Position Read, interpret, and follow basic blueprints, diagrams, engineering drawings, and other written instructions. Requires knowledge of computers, electronics, computer numerical controls, basics of CNC programming, and computer-aided manufacturing. Analyzes drawings, sketches, and design data of parts to determine dimension and configuration of cuts, selection of cutting tools, and machine speeds and feed rates according to knowledge of machine shop processes, part specifications, and machine capabilities. Set-up and operate CNC lathes and/or mills. Set-up parts to be machined with a wide range of size and configuration in the most efficient manner of processing. Machine parts to prints per specified tolerances. Determines reference points and direction of machine cutting paths. Computes angular and linear dimensions, radii, and curvatures, and outlines sequences of operations required to machine parts. Perform quality work checks to ensure the product meets quality standards using in-process inspection tools and devices. Work with engineers to produce quality parts to engineered specifications. Writes instruction sheets and cutter lists to guide set-up and operation of machine. Writes program of machine instructions to regulate movement of machine along cutting path. Compares computer printout with original program sheet to assure accuracy of machine instructions. Revises programs to eliminate instruction errors or omissions. Observes operation of machine on trial run to prove programmed instructions. Fills out quality and inspection paperwork. Qualifications Knowledge, Skills, and Abilities Possess the physical strength and ability to properly handle tooling, and to safely set-up large work pieces. Must own tools of the trade, and the ability to use them effectively. Ability to operate overhead cranes and forklifts. Ability to meet production requirements as specified. Apply shop math with the understanding of geometric tolerance and dimensioning. Ability to work with engineers and inspectors to produce quality parts to customer's specifications. Strong math aptitude. Ability to use precision measuring instruments (calipers, micrometers, and other gauges). Ability to use a feed and speed chart or a calculator. Understanding of metal properties and appropriate cutting tools, appropriate feed rates, speeds, and depth of cuts. Ability to program and operate CNC controls. Ability to machine parts to specific tolerances. Ability to verbally communicate with team members, supervisors, and engineers. Able to work with coolant, solvents, and grease. Ablility to program/set up a Mazak machine Required Education and Experience High school diploma or equivalent. Five years' experience in operating CNC lathes and/or mills. Blueprint reading a plus. Environment and Working Conditions Shop environment Hours Based on business needs Travel Requirements (percent) Up to 10% Disclaimer This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Additional Information The benefits of joining our team Because we seek to hire the best people, we work hard to provide benefits that make their lives better, so we offer a comprehensive benefit program which features: Health coverage for you and your family through medical, dental and vision plans 401(k) plan in with a generous company match Financial protection through disability, life, and accidental death & dismemberment insurance plans Tax advantages through flexible spending accounts that allow you to pay for specific health-care and dependent care expenses with pre-tax dollars Generous paid time off program in which the benefits increase along with your tenure with the company When you join our team, you do more than simply switch companies to progress your career. You become part of our family, a group of talented women and men who drive business success. #IND1 Industrious Group and its subsidiaries is an equal opportunity employer. All applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. All employment decisions are made based on qualifications, merit and business need.

Job Description At Task Force Tips (TFT), part of Madison Industries, our mission is simple but powerful: help first responders save lives and protect property-safely and effectively-every single day. As a trusted manufacturer of innovative firefighting equipment, we continuously improve our processes to deliver the highest-quality products to those who rely on them most. Our culture is TFT Proud-collaborative, energetic, and mission-driven. We're seeking a CNC Machine Operator who brings grit, integrity, and precision to ensure every part we produce meets our rigorous quality standards. This role directly contributes to putting life-saving products in the hands of first responders across the country. See our story: TFT, A Firefighter Legacy What You'll Do As a CNC Machine Operator, you'll play a critical role in producing components that protect lives: Operate & Maintain CNC Machines Run CNC machines to produce precision parts according to specifications. Load and unload parts/bar feeders safely and efficiently. Operate general machine shop equipment in a safe, compliant manner. Ensure Product Quality Inspect parts using calipers, micrometers, gauges, and other precision tools. Read and interpret blueprints and measurements to ensure accuracy. Proactively identify opportunities to improve processes or product quality. Collaborate & Communicate Report to supervisors at the start of each shift for assignments and instructions. Work independently or as part of a team to meet production goals. Communicate clearly and respectfully with colleagues, valuing diversity and inclusion. Maintain a Safe & Organized Work Environment Follow all OSHA and company safety procedures. Keep your work area clean and organized. Ensure all tools, gauges, and machines are properly maintained. What You Bring Hands-on experience with CNC machine operations. Proficiency with precision measuring instruments and ability to interpret blueprints. Strong understanding of safety protocols and ability to apply them consistently. Solid math skills for measurements, calculations, and quality checks. Ability to manage multiple tasks under pressure and meet deadlines. Strong communication skills-oral and written-across diverse teams. Commitment to integrity, grit, and mission-driven work. Desired Traits for Success: Grit - stays focused and persistent under pressure. Integrity - trusted to uphold quality and safety standards. Mission-driven - motivated by the impact of your work on first responders. Team-oriented - collaborates and supports colleagues to achieve shared goals. Detail-focused - ensures accuracy and precision in every operation. What We Offer At TFT, you'll join a team that values your contribution and invests in your growth: Monthly bonuses & profit-sharing opportunities 401(k) with company match Competitive wages with exceptional shift differential Free Employee Franciscan HEALTHeACCESS Clinic Paid vacation & PTO + 10 holidays Caregiver & parental leave-family matters! On-site fitness center Company-paid life insurance, short & long-term disability Employee assistance programs Employee recognition programs- we celebrate our Rockstars! Join Us. Make a Difference. If you're ready to combine your CNC skills, grit, and precision with a mission that truly matters, we want you on our team. *All Hires are subject to a background check and drug test Equal Employment Opportunity/Non-Discrimination Policy Task Force Tips LLC is an equal opportunity employer. It is the policy of Task Force Tips LLC that we evaluate qualified applicants and not to discriminate on the basis of ethnicity, race, color, religion, gender, sexual orientation, gender identity, national origin, disability, veteran status, age, familial status and other legally protected characteristics in its hiring decisions and employment policies, as required by the Indiana Civil Rights Act (I.C. 22-9, 1), Title VI and VII (Civil Rights Act of 1964), the Equal Pay Act of 1973, and any other applicable law. Click here to View Policy Task Force Tips LLC offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application or hiring process to accommodate a disability, you may request an accommodation with Human Resources at any time. Afternoon Shift (3PM-11PM) or Midnight Shift (11PM-7AM)

Job DescriptionPrecision. Stability. Pride in Workmanship. At BCI Solutions, Inc., we don't chase shortcuts. We build parts that are right the first time and stay right in the field. For more than 85 years, customers have trusted us because we deliver consistent, repeatable precision day in and day out. We're looking for an Experienced CNC Lathe Operator who takes ownership of their work, respects the process, and understands that details matter. Your Role This is a hands-on, precision-driven role. You'll be part of a machining team that values accuracy, organization, and steady output over flash or guesswork. You will: Set up and operate CNC lathes to produce parts to exact specification Read and interpret blueprints, routings, and process sheets Perform tool changes and offsets with care and consistency Inspect parts using micrometers, calipers, and other precision instruments Document production and quality checks accurately Maintain a clean, organized, and safe work area If you like knowing what “right” looks like and delivering it every shift, you'll fit here. What We Offer Competitive pay with shift differentials Health, dental, and vision insurance 401(k) with company match Full-time, steady work with overtime opportunities Clean, safe, and structured machining environment Long-term stability with a proven manufacturing company This is a place to build a career, not just punch a clock. What We're Looking For 2+ years of CNC lathe setup and operation experience Strong understanding of G-code, tooling, and machining fundamentals Ability to read technical drawings and hold tight tolerances Reliable, consistent, detail-focused work habits Experience machining iron or steel castings is a plus Build Something That Lasts If you take pride in craftsmanship, consistency, and doing the job the right way, BCI Solutions is where that mindset belongs. Apply today and put your skills to work in a shop that respects precision and the people who deliver it.

Job DescriptionJoin a Team That Builds What Matters Our client, based in Fort Wayne, IN, is a rapidly growing leader in CNC precision machining, design engineering, and custom fabrication. From unique prototypes to high-volume production, they partner on exciting projects across industries including aerospace, automotive, healthcare, and defense. If you're looking to join a team that values craftsmanship, innovation, and reliability, this is an excellent opportunity to grow your skills and make a meaningful impact.Key Responsibilities: Machine Operation: Operate CNC machines, lathes, milling machines, grinders, and other machinery to fabricate metal parts or products. Set-Up: Set up machines according to job specifications, including selecting the appropriate tools, loading materials, and adjusting machine settings. Quality Control: Inspect finished parts to ensure they meet quality standards and specifications. Adjust machine settings as necessary to maintain accuracy and precision. Maintenance: Perform routine maintenance tasks on machinery, including cleaning, lubricating, and replacing worn parts to ensure optimal performance and longevity. Safety Compliance: Adhere to all safety protocols and guidelines while operating machinery and handling materials. Report any safety hazards or concerns to management immediately. Collaboration: Work closely with management and staff to prioritize tasks, troubleshoot issues, and optimize production processes. Documentation: Maintain accurate records of production activities, including job setups, machine maintenance, and quality inspections. Continuous Improvement: Identify opportunities for process improvement and efficiency gains, and propose solutions to management for implementation. Training: Train on quote creation and reading, machine programming and operation, safety procedures, and quality standards as needed. Compliance: Ensure compliance with company policies, procedures, and regulatory requirements at all times. Qualifications: Education: High school diploma or equivalent. Vocational training or certification in machining or a related field is preferred. Experience: Previous experience operating CNC machines and other metalworking equipment is highly desirable. Familiarity with blueprints, schematics, and precision measurement tools is advantageous. Skills: Proficiency in operating CNC machines, lathes, and related metalworking equipment. Strong mechanical aptitude and troubleshooting skills. Attention to detail and commitment to producing high-quality work. Ability to interpret engineering drawings and specifications. Good communication and teamwork abilities. Basic computer skills for machine programming and data entry. Physical Requirements: Ability to stand for extended periods, lift heavy objects, and perform repetitive tasks. Safety Consciousness: Commitment to maintaining a safe work environment and adhering to safety protocols at all times. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Temp To Full-Time **$250.00 Sign on Bonus CNC Machine Operator Shift: 1st Pay: $15.00-22.00/hour We are looking for a responsible, innovative CNC /Lathe Machinist who understands machining, shop math, able to read blueprints, sketches, drawings, manuals, specifications, perform routine maintenance to machinery, and have a passion for CNC Machining. Individual needs to be energetic and aggressive, able to maintain composure under stressful deadlines, and work well individually or with a team. Has the capability to understand basic setups and has experience working in a fast paced machining environment. Essential Qualifications: - Programs mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic, geometry, and trigonometry; proving part programs. - Set up mills and lathes by installing and adjusting three-and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; tramming heads. - Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances. - Plans stock inventory by checking stock to determine amount available; anticipating needed stock; placing and expediting orders for stock; verifying receipt of stock. - Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes. - Ability to use measuring equipment (bore gages, Calipers, Micrometers (outside/inside and depth) Dial Indicators, gage Blocks, CMMs and Roundness Gages) - Maintains equipment by completing preventative maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs. - Must have own tools - Must have knowledge of deburring from start to finish - Responsible for quality control of parts from start to finish - Must be able to pay close attention to details - Punctual, reliable, trustworthy, and able to multi-task - Minimum two (2) years of experience - High school degree or equivalent - Background and drug screen required #TSTRATHP

We are hiring for "part-time" Set Up Staff person at the Allure Wedding and Events Centers! Join our team and participate in providing excellent customer service in our beautiful event venues. The majority of scheduling is located at 526 Indian Boundary Road in Chesterton, IN. Our events are generally held on Friday and Saturdays, and occasionally host events on Sundays as well. Work days for this Set Up position will vary, but primarily Tuesday mornings, Saturday mornings and sometimes Sunday mornings, for a total weekly hours of approximately 10- 15 hours. Great work opportunity for persons who are retired or college students, who only want "part-time", short, morning work hours. Our ideal candidate is friendly, demonstrates a positive attitude, is attentive and motivated, and must have a "clean and manicured" appearance - as our Event Customers are on site at various times. Responsibilities Setting up tables and chairs, including tablecloths and table decor Placing table silverware and napkin place settings- specific to each event Assist in event decor set up Rolling silverware and preparing for upcoming events Attention to details for each event set up Qualifications Ability to listen and communicate effectively Able to multitask efficiently Must meet minimum age requirement of 16 yrs No experience necessary, we will provide training- but following directions is a must We are looking forward to receiving your application. Thank you.

Job Description Job Title: Manual Machinist Job Type: Full-Time Salary: $20-$34/hour depending on experience Boyd Machine is a leading industrial repair company specializing in thermal spray coatings. We pride ourselves on our commitment to quality, innovation, and customer satisfaction. We are currently seeking multiple skilled Manual Machinists to join our dynamic team. Job Summary: The Manual Machinist will be responsible for setting up and operating various manual machining equipment, including lathes, milling machines, and surface grinders, to produce precision components according to technical specifications and engineering drawings. The ideal candidate will have a strong understanding of machining processes, excellent attention to detail, and a commitment to maintaining a safe work environment. Key Responsibilities: - Set up and operate manual lathes, milling machines, and other machining equipment to produce/repair parts. - Read and interpret blueprints, technical drawings, and specifications to determine machining requirements. - Perform measurements using calipers, micrometers, and gauges to ensure compliance with tolerances and quality standards. - Monitor machining operations and make adjustments as necessary to maintain production quality and efficiency. - Collaborate with engineers and production staff to develop efficient machining processes and improve production standards. - Maintain a clean and organized work environment, adhering to safety protocols at all times. - Document production data and maintain accurate records of work performed, including time and materials used. Qualifications: - High school diploma or equivalent; relevant vocational training or coursework in machining is beneficial. - Proven experience as a Manual Machinist, with a minimum of 3 years in a similar role preferred - Proficiency in operating manual lathes, mills, and grinders. - Strong knowledge of machining principles, tools, and techniques. - Familiarity with measuring instruments and quality control processes. - Ability to read and interpret technical drawings and specifications. - Strong problem-solving skills and attention to detail. - Excellent communication skills and ability to work effectively in a team. - Ability to lift heavy materials and work in a physically demanding environment. - Commitment to safety and quality standards. Benefits: - Competitive salary and overtime opportunities - Comprehensive health, dental, and vision insurance after 60 days - Retirement plan with profit sharing after one year - Paid time off and holidays. 10 days vacation time - Opportunities for professional development and advancement Boyd Machine is an equal opportunity employer and welcomes applicants from all backgrounds to apply.

This company is hiring for a skilled machinist on 1st shift. This is a job shop environment, and candidates will work on a wide range of custom parts and projects, not repetitive line work or high-volume production machining. This company focuses on the design and manufacturing of high-quality drilling equipment. We're looking for individuals with experience on mills or lathes. Pay Range: $26 - $32/hr.+ Shifts Available: 1st Shift, Monday - Friday 5:00 AM - 1:30 PM CST Responsibilities Managing machines and the quality machining processes to increase throughput and quality Quality checking parts to ensure they're within tolerance Perform machine setups to run parts Maintain machines on a schedule Keep environment clean and organized Qualifications: Proficiency operating CNC machines (required) Strong blueprint reading and interpretation skills (required) Familiarity with measuring tools including calipers and micrometers Ability to troubleshoot tooling issues and make necessary program edits Understanding of tool selection for various applications Nice-to-Have Skills (Not Required): Experience with DMG Mori 3+2, CNC Mill Experience with manual mill Experience with manual lathe Experience with MasterCAM

Masterbilt INC is a leader in precision manufacturing, known for our commitment to quality and innovation. We're currently seeking a skilled CNC Machinist to join our team in South Bend, IN. If you're passionate about producing high-quality products and thrive in a dynamic environment, we want to hear from you! Overall Purpose: As a CNC Machinist (Swiss), you will play a crucial role in our manufacturing process, operating computer numerical control (CNC) machines and ensuring the production of top-quality products. Your expertise will help us optimize workflow and achieve our business goals efficiently. Essential Job Functions & Expected Outcomes: Read part blueprints and documentation to understand machining parameters and programs. Determine machining processes from print to part. Select, align, and secure work holding, cutting tools, and materials on CNC Swiss machines. Operate machines by loading and unloading parts, adjusting settings, and monitoring processes. Maintain specifications by observing operations, troubleshooting processes, and replacing worn tools. Verify finished work-piece conformance to specifications using measurement tools. Maintain a safe and clean work environment, adhering to safety procedures and regulations. Document production and quality logs, and collaborate with engineers to resolve machining problems. Requirements Requirements: Education: High school diploma or equivalent. Minimum 2 years in manufacturing and Swiss CNC machining is “A MUST” Functional Skills: Strong attention to detail, mechanical aptitude, familiarity with CNC machining principles, ability to interpret technical drawings and blueprints, and knowledge of lean manufacturing principles. Technology Aptitude/Skills: Proficient at Star, Spring, or Tsugami CNC machines (preferred). Language Skills: Excellent verbal and written communication. Leadership/Behaviors: Solid collaboration skills, openness to new ideas, positive attitude, flexibility, versatility. Culture Match Behaviors: Respectful, honest, accountable, good listener, agile, optimistic. Physical Requirements: Ability to operate a motor vehicle for travel. Ability to stand for up to 8 hours, sit at a desk, operate a keyboard and computer screen, communicate effectively, and perform various physical tasks. Ability to lift up to 75 lbs. sporadically. Join Our Team: If you're ready to join a dynamic team and contribute to our success, apply now! Send your resume to [email protected] or visit our website for more information. Masterbilt INC offers competitive compensation, opportunities for growth, and a supportive work environment. Don't miss this chance to be part of our innovative team! #CNCMachinist #PrecisionManufacturing #JoinOurTeam

Enprotech Industrial Technologies is the largest supplier of repair, rebuilding, and field services for the metal forming and steel industry in North America and part of the ITOCHU family of companies. At Enprotech we are committed to providing team members with a safe and inclusive place to work. We value each individual for who they are, what they bring to the table, and respect each other's ideas and contributions. Our core values drive our culture and commitment to our team members. We demonstrate this through every interaction with our team members, as we live out our core values. We are looking for team members that demonstrate these values both at work and in our personal lives. SAFETY | CAN-DO-ATTITUDE | URGENCY | PASSION |INTEGRITY |TEAMWORK | COMMUNITY Is this you? If you want a position to accelerate your career growth, and one where you can make a real impact on our people, our customers, and the business, this is the role for you! Position Summary & Objective Set-up and operate CNC/Manual Lathe or Mill to produce precision parts and instruments. Plans CNC program to control contour-path machining of parts on automatic machine tools. Essential Functions Performed by the Position * Read, interpret, and follow basic blueprints, diagrams, engineering drawings, and other written instructions. * Requires knowledge of computers, electronics, computer numerical controls, basics of CNC programming, and computer-aided manufacturing. * Analyzes drawings, sketches, and design data of parts to determine dimension and configuration of cuts, selection of cutting tools, and machine speeds and feed rates according to knowledge of machine shop processes, part specifications, and machine capabilities. * Set-up and operate CNC lathes and/or mills. * Set-up parts to be machined with a wide range of size and configuration in the most efficient manner of processing. * Machine parts to prints per specified tolerances. * Determines reference points and direction of machine cutting paths. * Computes angular and linear dimensions, radii, and curvatures, and outlines sequences of operations required to machine parts. * Perform quality work checks to ensure the product meets quality standards using in-process inspection tools and devices. * Work with engineers to produce quality parts to engineered specifications. * Writes instruction sheets and cutter lists to guide set-up and operation of machine. * Writes program of machine instructions to regulate movement of machine along cutting path. * Compares computer printout with original program sheet to assure accuracy of machine instructions. * Revises programs to eliminate instruction errors or omissions. * Observes operation of machine on trial run to prove programmed instructions. * Fills out quality and inspection paperwork. Qualifications Knowledge, Skills, and Abilities * Possess the physical strength and ability to properly handle tooling, and to safely set-up large work pieces. * Must own tools of the trade, and the ability to use them effectively. * Ability to operate overhead cranes and forklifts. * Ability to meet production requirements as specified. * Apply shop math with the understanding of geometric tolerance and dimensioning. * Ability to work with engineers and inspectors to produce quality parts to customer's specifications. * Strong math aptitude. * Ability to use precision measuring instruments (calipers, micrometers, and other gauges). * Ability to use a feed and speed chart or a calculator. * Understanding of metal properties and appropriate cutting tools, appropriate feed rates, speeds, and depth of cuts. * Ability to program and operate CNC controls. * Ability to machine parts to specific tolerances. * Ability to verbally communicate with team members, supervisors, and engineers. * Able to work with coolant, solvents, and grease. * Ablility to program/set up a Mazak machine Required Education and Experience * High school diploma or equivalent. * Five years' experience in operating CNC lathes and/or mills. * Blueprint reading a plus. Environment and Working Conditions * Shop environment Hours Based on business needs Travel Requirements (percent) * Up to 10% Disclaimer This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Additional Information The benefits of joining our team Because we seek to hire the best people, we work hard to provide benefits that make their lives better, so we offer a comprehensive benefit program which features: * Health coverage for you and your family through medical, dental and vision plans * 401(k) plan in with a generous company match * Financial protection through disability, life, and accidental death & dismemberment insurance plans * Tax advantages through flexible spending accounts that allow you to pay for specific health-care and dependent care expenses with pre-tax dollars * Generous paid time off program in which the benefits increase along with your tenure with the company When you join our team, you do more than simply switch companies to progress your career. You become part of our family, a group of talented women and men who drive business success. #IND1 Industrious Group and its subsidiaries is an equal opportunity employer. All applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. All employment decisions are made based on qualifications, merit and business need.

At Task Force Tips (TFT), part of Madison Industries, our mission is simple but powerful: help first responders save lives and protect property-safely and effectively-every single day. As a trusted manufacturer of innovative firefighting equipment, we continuously improve our processes to deliver the highest-quality products to those who rely on them most. Our culture is TFT Proud-collaborative, energetic, and mission-driven. We're seeking a CNC Machine Operator who brings grit, integrity, and precision to ensure every part we produce meets our rigorous quality standards. This role directly contributes to putting life-saving products in the hands of first responders across the country. See our story: TFT, A Firefighter Legacy What You'll Do As a CNC Machine Operator, you'll play a critical role in producing components that protect lives: Operate & Maintain CNC Machines Run CNC machines to produce precision parts according to specifications. Load and unload parts/bar feeders safely and efficiently. Operate general machine shop equipment in a safe, compliant manner. Ensure Product Quality Inspect parts using calipers, micrometers, gauges, and other precision tools. Read and interpret blueprints and measurements to ensure accuracy. Proactively identify opportunities to improve processes or product quality. Collaborate & Communicate Report to supervisors at the start of each shift for assignments and instructions. Work independently or as part of a team to meet production goals. Communicate clearly and respectfully with colleagues, valuing diversity and inclusion. Maintain a Safe & Organized Work Environment Follow all OSHA and company safety procedures. Keep your work area clean and organized. Ensure all tools, gauges, and machines are properly maintained. What You Bring Hands-on experience with CNC machine operations. Proficiency with precision measuring instruments and ability to interpret blueprints. Strong understanding of safety protocols and ability to apply them consistently. Solid math skills for measurements, calculations, and quality checks. Ability to manage multiple tasks under pressure and meet deadlines. Strong communication skills-oral and written-across diverse teams. Commitment to integrity, grit, and mission-driven work. Desired Traits for Success: Grit - stays focused and persistent under pressure. Integrity - trusted to uphold quality and safety standards. Mission-driven - motivated by the impact of your work on first responders. Team-oriented - collaborates and supports colleagues to achieve shared goals. Detail-focused - ensures accuracy and precision in every operation. What We Offer At TFT, you'll join a team that values your contribution and invests in your growth: Monthly bonuses & profit-sharing opportunities 401(k) with company match Competitive wages with exceptional shift differential Free Employee Franciscan HEALTHeACCESS Clinic Paid vacation & PTO + 10 holidays Caregiver & parental leave-family matters! On-site fitness center Company-paid life insurance, short & long-term disability Employee assistance programs Employee recognition programs- we celebrate our Rockstars! Join Us. Make a Difference. If you're ready to combine your CNC skills, grit, and precision with a mission that truly matters, we want you on our team. *All Hires are subject to a background check and drug test Equal Employment Opportunity/Non-Discrimination Policy Task Force Tips LLC is an equal opportunity employer. It is the policy of Task Force Tips LLC that we evaluate qualified applicants and not to discriminate on the basis of ethnicity, race, color, religion, gender, sexual orientation, gender identity, national origin, disability, veteran status, age, familial status and other legally protected characteristics in its hiring decisions and employment policies, as required by the Indiana Civil Rights Act (I.C. 22-9, 1), Title VI and VII (Civil Rights Act of 1964), the Equal Pay Act of 1973, and any other applicable law. Click here to View Policy Task Force Tips LLC offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application or hiring process to accommodate a disability, you may request an accommodation with Human Resources at any time. Afternoon Shift (3PM-11PM) or Midnight Shift (11PM-7AM)

Join a Team That Builds What Matters Our client, based in Fort Wayne, IN, is a rapidly growing leader in CNC precision machining, design engineering, and custom fabrication. From unique prototypes to high-volume production, they partner on exciting projects across industries including aerospace, automotive, healthcare, and defense. If you're looking to join a team that values craftsmanship, innovation, and reliability, this is an excellent opportunity to grow your skills and make a meaningful impact.Key Responsibilities: Machine Operation: Operate CNC machines, lathes, milling machines, grinders, and other machinery to fabricate metal parts or products. Set-Up: Set up machines according to job specifications, including selecting the appropriate tools, loading materials, and adjusting machine settings. Quality Control: Inspect finished parts to ensure they meet quality standards and specifications. Adjust machine settings as necessary to maintain accuracy and precision. Maintenance: Perform routine maintenance tasks on machinery, including cleaning, lubricating, and replacing worn parts to ensure optimal performance and longevity. Safety Compliance: Adhere to all safety protocols and guidelines while operating machinery and handling materials. Report any safety hazards or concerns to management immediately. Collaboration: Work closely with management and staff to prioritize tasks, troubleshoot issues, and optimize production processes. Documentation: Maintain accurate records of production activities, including job setups, machine maintenance, and quality inspections. Continuous Improvement: Identify opportunities for process improvement and efficiency gains, and propose solutions to management for implementation. Training: Train on quote creation and reading, machine programming and operation, safety procedures, and quality standards as needed. Compliance: Ensure compliance with company policies, procedures, and regulatory requirements at all times. Qualifications: Education: High school diploma or equivalent. Vocational training or certification in machining or a related field is preferred. Experience: Previous experience operating CNC machines and other metalworking equipment is highly desirable. Familiarity with blueprints, schematics, and precision measurement tools is advantageous. Skills: Proficiency in operating CNC machines, lathes, and related metalworking equipment. Strong mechanical aptitude and troubleshooting skills. Attention to detail and commitment to producing high-quality work. Ability to interpret engineering drawings and specifications. Good communication and teamwork abilities. Basic computer skills for machine programming and data entry. Physical Requirements: Ability to stand for extended periods, lift heavy objects, and perform repetitive tasks. Safety Consciousness: Commitment to maintaining a safe work environment and adhering to safety protocols at all times.