Consolidated Supply Co. jobs in Nampa, ID - 11862 jobs

The Chief Financial Officer (CFO) is a key member of the NAIS senior leadership team, responsible for the strategic direction, oversight, and integrity of the organization's financial operations. Reporting to the President, the CFO leads the Finance and Accounting team and partners with other departments to ensure financial sustainability, compliance, and alignment with NAIS's mission and strategic goals. The CFO oversees accounting, budgeting, financial reporting, investments, financial planning and analysis, audits, and financial systems, as well as risk management with the general counsel and management team, while fostering a culture of accountability, transparency, and continuous improvement. Responsibilities: Strategic Financial Leadership Lead long-term financial planning, forecasting, and modeling to support strategic decision-making. Serve as a key advisor to the President and senior leadership on financial strategy, risk management, and sustainability. Present financial reports and recommendations to the Board of Trustees and relevant committees. Collaborate with department heads to align financial planning with organizational priorities. Financial Operations & Compliance Oversee all accounting functions including general ledger, accounts payable/receivable, payroll, and monthly close. Ensure compliance with GAAP, IRS regulations (including Form 990), and multi-state tax requirements. Manage the annual audit process and relationships with external auditors and financial institutions. Maintain and enhance internal controls and financial policies to safeguard organizational assets. Budgeting & Reporting Lead the development and monitoring of the annual operating and capital budgets. Provide timely, accurate, and accessible financial reports to internal and external stakeholders. Promote fiscal transparency and financial literacy across departments. Investment & Cash Management Monitor cash flow and manage short-term investments to optimize returns. Oversee the organization's investment portfolio in accordance with Board policy. Team Leadership & Systems Oversight Supervise and develop the finance and administration team, including the Controller, AR/AP/Payroll Managers, and Assistant Controller. Ensure effective use and continuous improvement of financial systems (e.g., Sage Intacct, ADP, Salesforce, PN3, Ramp). Foster a collaborative, service-oriented team culture. Other responsibilities related to financial operations and management as assigned. Qualifications: Bachelor's degree in Accounting, Finance, or related field (CPA or MBA preferred). Minimum 10 years of progressive financial leadership experience, preferably in an association, nonprofit or education-related organization. Demonstrated experience in strategic planning, budgeting, audit management, and compliance. Experience supervising, coaching, and developing employees. Strong interpersonal, communication, and team-building skills. Proficiency in financial systems and data tools (e.g., Excel, Power BI, Sage Intacct, ADP). Preferred skills and Qualifications: Demonstrated experience in managing a comprehensive insurance portfolio, including evaluating coverage needs, negotiating policies, and overseeing claims processes, with a proven ability to develop and implement risk mitigation strategies that reduce financial exposure and support organizational resilience. Partnered with the Legal team to ensure organizational compliance with risk management requirements and maintain timely execution of insurance renewals. Competencies: Strategic Thinking & Business Acumen: Ability to align financial strategy with organizational goals. Financial Stewardship & Risk Management: Ensures compliance and protects organizational assets. Leadership & Team Development: Builds and motivates high-performing teams. Communication & Collaboration: Communicates complex financial information clearly to diverse audiences. Integrity & Accountability: Demonstrates ethical leadership and sound judgment. Operational Excellence & Innovation: Continuously improves systems and processes. Position Attributes HR Role: Management Team Status & Classification: Regular, Full-time, Exempt Business Unit: Finance & Accounting Team Supervisor: President Location: Remote in the United States with preference for candidates located near NAIS headquarters in Washington, DC Physical Requirements: This position primarily involves sedentary work and requires the ability to operate a computer and other office equipment. The CFO must be able to communicate effectively in person, over video conferencing, and via phone and email. Occasional travel may be required for meetings, conferences, or visits to the organization's headquarters. Travel: Some travel is required for this role, including attendance at conferences, organizational events, and visits to our DC headquarters. Candidates located outside the Washington, DC area may be expected to travel more frequently to support collaboration and engagement with the team. Travel needs may vary based on business priorities. The National Association of Independent Schools (NAIS) provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, personal appearance, marital status, family responsibilities, political affiliation, matriculation, or status as a covered veteran in accordance with applicable federal, state and local laws. Disclaimer: This document describes the position currently available. It is not an employment contract. NAIS reserves the right to modify job duties or job descriptions at any time, as determined by the needs of the organization. #J-18808-Ljbffr

Purpose Responsible for providing leadership and strategic direction for the overall production operation in accordance with the vision and values of the corporation. Key Responsibilities Ensure safety of all team members and contractors working in operating unit or department.. This includes supporting all corporate safety programs; developing SOP's, identifying and eliminating hazards, and enforcing all safety rules. Ensure compliance with all standards and programs (safety, environmental, quality, maintenance and manufacturing policies and procedures) within area of responsibility. Work closely with Technical Manager to ensure products meet expectations and ensure proper checks are being done to ensure quality. Responsible for manufacturing operations through subordinate supervisors. Lead, plan and participate in process improvement, cost reductions and continuous improvement projects as part of the site business plan. Direct daily production to ensure production meets delivery schedules. Assist and participate with interviewing, selection and orientation process. Ensure and maintain established customer focus for team members, effectively maintain positive relationships with key strategic external and internal customers/suppliers. Manage production department budget and participate in forecasting activities. Ensure equipment supplies and mill facilities are in appropriate working condition to meet business needs. Prepare timely reports for distribution to internal customers; maintain accurate records and files. Perform other duties as necessary Models company core values Required Qualifications Associates' degree in Business, Manufacturing, Production or related field or three (3) or more years of manufacturing supervisory work experience Excellent written and oral communication Ability to facilitate meetings and lead teams Proficient knowledge of computer and supporting software Ability to prioritize multiple tasks and projects to meet schedule and project requirements Understanding of effective and efficient production and manufacturing methods Demonstrated skills or knowledge of budgeting and financial analysis. Strong analytical and mathematical ability. Maintain thorough knowledge of mill process and equipment, have workable knowledge of industry technological developments and best practices Strong interpersonal, organizational, and project management skills Preferred Qualifications Bachelors' degree in Business, Manufacturing, Production or related field About Roseburg Forest Products Founded in 1936, Roseburg Forest Products is a privately held company based in Springfield, Oregon. With a legacy in sustainable forestry and innovative wood products manufacturing, we are a leading North American producer of engineered wood, exterior trim, plywood, lumber, and medium density fiberboard (MDF). Our products shape and support homes, workplaces, and industries, while our timberlands protect forest health for future generations and provide high-quality wood fiber for our integrated operations. At Roseburg, we believe in making lives better from the ground up through the products we create, the relationships we build, and the communities we support. Our team of passionate professionals value safety, integrity, and excellence in all we do. From the mill to the forest to the office, you'll find opportunities to grow and contribute to a company that cares for people, communities, and the environment. Learn more about who we are and what we do at ***************** Benefits at Roseburg Roseburg offers a comprehensive and competitive benefits package to support the health, financial security, and well-being of our team members and their families. Key benefits include: Bonus opportunities based on company and individual performance 401(k) with up to 4% company match and 3% automatic company contribution Vacation starting at 3 weeks and 11 paid holidays per year Company-sponsored medical, dental, and vision insurance Company-paid life, AD&D, and long-term disability insurance options Mental health benefits for the entire family, including 8 free annual sessions per person Wellness programs and incentives, including biometric screenings & wellness challenges Paid time away from work for illness or injury, as well as paid parental bonding time Health Savings Account (HSA) with company contributions and Flexible Spending Account (FSA) options Company match for charitable contributions Education assistance and professional development support Financial and retirement counseling Additional voluntary benefits including pet insurance, student loan refinancing, and exclusive scholarships for child dependents, and more! AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

We are hiring an experienced Shipping & Receiving Clerk to support our machining and fabrication teams by receiving and staging raw materials, as well as packaging and shipping finished products. We are one of the largest job shops in the Pacific Northwest and are looking for someone motivated, dependable, and eager to grow with the company. This role is critical to maintaining smooth production flow and on-time deliveries. Key Responsibilities: Operate forklifts and other material-handling equipment to support production, shipping, receiving, and staging activities Receive, stage, and distribute raw materials according to work orders and verbal instructions Package and prepare products for shipment Perform inventory transactions and updates within the ERP system Maintain safe operation and proper working condition of machinery and equipment Support efficient material flow throughout the production floor Qualifications: 4 - 6 years shipping and receiving experience. Be able to obtain certification on forklifts and other material-handling equipment Have a working knowledge of material-handling best practices Be safety-focused with experience in a warehouse or production environment Understand work orders related to production, shipping, and receiving Communicate clearly and work well within a team environment Be flexible with scheduling as needed Possess strong computer skills and customer service skills Be comfortable handling heavy and awkward forklift loads Why Join Us? This role has a direct impact on production efficiency and shipping timelines. We're looking for someone who can make an immediate contribution and grow into expanded responsibilities over time. A competitive wage and comprehensive benefits package are offered for the right candidate. How to Apply If you're ready to put your material-handling skills to work in a fast-paced manufacturing environment, we'd love to hear from you. Diversity and equity are important values for us, and we encourage all qualified applicants to apply, regardless of race, gender, religion, sexual orientation, or disability. Position is subject to export control regulations as defined in 22 CFR 120.62

Ascentec Engineering is hiring an HVAC Systems Specialist to join our team in Dallas, Oregon. The selected candidate will lead the comprehensive evaluation, correction, and rebuild of an existing commercial HVAC system experiencing long-term performance issues. This role is a fixed-term (12-month), medical/dental/vision benefits eligible, full-time position embedded within the maintenance team and is responsible for diagnosing systemic failures, implementing corrective solutions, and establishing long-term reliability and maintainability of the building's heating and cooling systems. This position requires a senior-level HVAC professional capable of working independently, coordinating with external vendors, and providing technical leadership throughout the rebuild effort. This position is onsite (not remote/not hybrid) at our Dallas, Oregon facility and is not eligible for Visa sponsorship or transfer of Visa sponsorship. Primary Responsibilities: Conduct a full assessment of existing HVAC systems, including equipment, controls, ductwork, airflow, and distribution Identify root causes of heating, cooling, and comfort issues across the facility Develop and execute corrective action plans, including system repairs, upgrades, and replacements Lead HVAC rebuild and optimization efforts to improve reliability, performance, and efficiency Provide technical guidance and mentorship to maintenance personnel Coordinate and oversee external HVAC contractors and specialty vendors as required Support HVAC troubleshooting and repairs while maintaining focus on rebuild objectives Ensure all HVAC work complies with applicable codes, standards, and safety requirements Develop system documentation, including as-built drawings, operating procedures, and preventive maintenance plans Assist in establishing long-term maintenance strategies to sustain system performance beyond the 12-month contract term Required Qualifications: Minimum of eight years of experience in commercial HVAC systems Strong diagnostic and troubleshooting skills with complex HVAC systems Experience with HVAC controls, automation systems, and related components EPA Universal Certification Ability to read and interpret mechanical drawings, schematics, and control diagrams Strong organizational, communication, and documentation skills Ability to work independently and manage multiple priorities Preferred Qualifications: HVAC system design, retrofit, or commissioning experience Project management or lead technician experience Experience working within an in-house facilities or maintenance environment Familiarity with energy efficiency practices and load calculations OSHA safety training or equivalent Physical & Work Requirements: Ability to lift up to 50 pounds Ability to climb ladders, access rooftops, and work in mechanical spaces Ability to work in varying environmental conditions, including hot and cold environments On-site presence required The employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of the job, absent undue hardship. The employer retains the right to change or assign other duties to this position. Key Success Metrics: Improved and stable temperature control throughout the facility Significant reduction in HVAC-related service calls and emergency repairs Completion of system documentation and maintenance procedures Successful handoff of system knowledge to the maintenance team at contract completion Compensation/Benefits: $100,000 to $125,000 DOE Medical / Dental / Vision Paid time off / paid holidays Tools, PPE, and support resources provided Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Purpose Accountable for basic operation of the site's quality assurance and control program including but not limited to: assisting and supporting all safety, environmental and quality regulations, product testing and adherence to standards, targets and recipes, maintain relevant equipment and calibrations, and decision-making through basic statistical understanding. Key Responsibilities Perform all work in accordance with safety rules and regulations and participate in facility health & safety activities as assigned Use descriptive statistics to identify non-conforming material to site referenced standards and targets Ensure all relevant quality requirements are consistently met according to the QA manual and plant SOPs Ensure that non-conforming product is appropriately quarantined, identified and segregated according to standard procedures Ensure the communication of non-conformance is clear and concise to required parties. Disposition basic non-conforming product as allowed by site Technical Manager. Record testing and inspection results by inputting into appropriate database or spreadsheets while identifying and responding to test results outside of product standards and targets Verify that all product packaging and appearance standards meet site and client expectations. Generate and analyze reports and charts Monitor and document process parameter changes as assigned Communicate test results and observations to operations and management to maintain process and product conformance Monitor and record consumption and inventory of raw materials (wax, resin, etc.). Verify quality of raw materials as required Support preventive and unscheduled maintenance tasks. Assist in process and product tests/trials. Be pro-active in identifying and performing other tasks to maintain and improve safety, quality and environmental performance Demonstrate adherence to process and product SOPs, JSAs, check sheets and other QMS documentation Provide support to team members when a quality issue arises Demonstrate drive and willingness to advance to higher levels of responsibility Perform in a relief capacity for production coordinator Perform other duties as assigned Models company core values Other duties as assigned Required Qualifications Associate's Degree and two years of experience in laboratory work, quality control, or general manufacturing; or an equivalent combination of training, education, and experience Knowledge of and ability to follow all quality and process standards Demonstrated ability to operate a computer and supporting software, to include spreadsheet and statistical packages Working knowledge of manufacturing equipment and production processes Demonstrated ability to operate sample preparation and testing equipment Knowledge of inventory management Excellent verbal and written communication as well as interpersonal skills Proficient math skills and statistical knowledge, including concepts Demonstrated ability to operate a variety of material handling equipment (both hand tools and electrical/motorized equipment) Ability to climb stairs and lift up to 50 pounds Demonstrated ability to work while wearing a respirator and/or other safety clothing or equipment Preferred Qualifications Associate degree in Forest Products, Engineering, Wood Science or related scientific field preferred Three (3) years plywood, composite, or engineered wood manufacturing experience About Roseburg Forest Products Founded in 1936, Roseburg Forest Products is a privately held company based in Springfield, Oregon. With a legacy in sustainable forestry and innovative wood products manufacturing, we are a leading North American producer of engineered wood, exterior trim, plywood, lumber, and medium density fiberboard (MDF). Our products shape and support homes, workplaces, and industries, while our timberlands protect forest health for future generations and provide high-quality wood fiber for our integrated operations. At Roseburg, we believe in making lives better from the ground up through the products we create, the relationships we build, and the communities we support. Our team of passionate professionals value safety, integrity, and excellence in all we do. From the mill to the forest to the office, you'll find opportunities to grow and contribute to a company that cares for people, communities, and the environment. Learn more about who we are and what we do at ***************** Benefits at Roseburg Roseburg offers a comprehensive and competitive benefits package to support the health, financial security, and well-being of our team members and their families. Key benefits include: Bonus opportunities based on company and individual performance 401(k) with up to 4% company match and 3% automatic company contribution Vacation starting at 3 weeks and 11 paid holidays per year Company-sponsored medical, dental, and vision insurance Company-paid life, AD&D, and long-term disability insurance options Mental health benefits for the entire family, including 8 free annual sessions per person Wellness programs and incentives, including biometric screenings & wellness challenges Paid time away from work for illness or injury, as well as paid parental bonding time Health Savings Account (HSA) with company contributions and Flexible Spending Account (FSA) options Company match for charitable contributions Education assistance and professional development support Financial and retirement counseling Additional voluntary benefits including pet insurance, student loan refinancing, and exclusive scholarships for child dependents, and more! AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

Purpose This position will be responsible for assisting the human resource manager and coordinating the hourly staffing functions for the assigned plants. Key Responsibilities Provides support to the human resource function Reviews applications and resumes' Screens applicants, including scheduling of appropriate assessments Schedule interviews with applicants Pre-employment reference checks Schedule and track pre-employment background checks, post offer physicals, drug testing and plant tours Maintain applicant hiring documentation as specified Participates in new hire orientations (forms, policies, etc.) Tracking of all new employee progress Attends local job fairs and other recruiting activities Uses all means available to communicate available jobs to community ties and employment agencies Maintains plant manning levels to budgeted labor costs Monitor Applicant Pool for admin recruitments, send out to hiring managers, respond with thank you letters as appropriate Maintains part time employee list and disbursement of work Maintains pool of applicants to attain complex hiring needs Adheres to and supports safety policies and procedures Other duties as assigned Model company core values Required Qualifications High school diploma or equivalent Minimum of 3 years' human resources experience Excellent listening, written and oral communication skills Must be a team player with team building skills Excellent interpersonal skills Maintain the highest ethical standards in dealing with confidential information Ability to make decisions when under pressure Excellent PC operation and experience (Word and Excel Spreadsheets, PowerPoint) Proven leader and results driven Good understanding of company hiring policies Willing to expand education/training Preferred Qualifications Associates degree and 0-3 years of related human resources experience Experience with recruiting and hiring processes About Roseburg Forest Products Founded in 1936, Roseburg Forest Products is a privately held company based in Springfield, Oregon. With a legacy in sustainable forestry and innovative wood products manufacturing, we are a leading North American producer of engineered wood, exterior trim, plywood, lumber, and medium density fiberboard (MDF). Our products shape and support homes, workplaces, and industries, while our timberlands protect forest health for future generations and provide high-quality wood fiber for our integrated operations. At Roseburg, we believe in making lives better from the ground up through the products we create, the relationships we build, and the communities we support. Our team of passionate professionals value safety, integrity, and excellence in all we do. From the mill to the forest to the office, you'll find opportunities to grow and contribute to a company that cares for people, communities, and the environment. Learn more about who we are and what we do at ***************** Benefits at Roseburg Roseburg offers a comprehensive and competitive benefits package to support the health, financial security, and well-being of our team members and their families. Key benefits include: Bonus opportunities based on company and individual performance 401(k) with up to 4% company match and 3% automatic company contribution Vacation starting at 3 weeks and 11 paid holidays per year Company-sponsored medical, dental, and vision insurance Company-paid life, AD&D, and long-term disability insurance options Mental health benefits for the entire family, including 8 free annual sessions per person Wellness programs and incentives, including biometric screenings & wellness challenges Paid time away from work for illness or injury, as well as paid parental bonding time Health Savings Account (HSA) with company contributions and Flexible Spending Account (FSA) options Company match for charitable contributions Education assistance and professional development support Financial and retirement counseling Additional voluntary benefits including pet insurance, student loan refinancing, and exclusive scholarships for child dependents, and more! AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

Purpose Responsible for the oversight and execution of company and plant human resource related functions. Supports plant leadership and team members by effectively leading the Human Resource function. Key Responsibilities Oversee and execute hiring process to meet facility staffing needs Continuous improvement of the selection process to identify the appropriate talent and level of talent to advance our desired culture Directs and reviews the on-boarding process Implements company and plant related policies Presents human resource related training Supports efforts to achieve facility's performance KPI's Lead all HR initiatives and goals Perform the role of employee advocate and create culture of positive employee relations Interpretation, education and enforcement of appropriate policy, labor agreement (unionized facilities), labor strategy and work rules Coach and mentor management members on team member issues Participates in and resolves internal investigations Grievance process adjudication as appropriate Oversee and administer leave of absence process Administers drug testing policy and procedures Responsible for the plant job posting/bid system Collaborate with Springfield office and other facilities as required Champion of company core values May supervise subordinate staff Required Qualifications Eight (8) years related work experience; or any equivalent combination of experience and training that demonstrates the ability to perform the key responsibilities of this position Maintain the highest ethical standards in dealing with confidential information Maintain composure in high-pressure situations Excellent listening, written and oral communication skills Ability to work in and maintain a highly functional team environment Proficiency in Word and Excel Proven leader and results driven Excellent interpersonal skills Preferred Qualifications Bachelors degree and eight (8)+ years of related HR experience PHR/SPHR, SHRM-CP/SCP certifications Experience in Union environment

Founded in 1995, National Products began supplying the world with our industry leading RAM Mounting Systems. Relied on by the world's most rugged industries, we serve motorcyclists, kayak fishers, delivery drivers, farmers, pilots, extreme sports enthusiasts, and others with mounting solutions for high vibration environments. We manufacture mounts for action cameras, tablets, phones, and other displays across nearly every mobile market. Made right here in Seattle, we are proud to offer a lifetime warranty on most products. Job Summary At National Products Inc, the Sales Support Specialist is a key role in the Sales Operations team connecting our customers with the things they need. Grow your Inside Sales CRM experience within a strong and established structure by focusing on order management and demand planning assistance for Fortune 500 companies. Our Sales Support Specialists work as a team to enhance customer success. Demand for RAM Mounts is at an all-time high and we want to capitalize on new market opportunities by reducing order friction and inspiring customers' new orders. Specific Duties Processing Purchase Orders and Order Revisions as backup Order Entry Capturing and updating precise and relevant customer details in our ERP software Supporting NPI's Account Management team on customer-specific solutions Provide order status updates and support customer requests Supporting operational process improvements to adhere with our ISO:9001 Quality system Proactively refine best practices to improve efficiencies of sales team Draft, update, and maintain Standard Operating Procedures (SOPs) to ensure clarity, accuracy, and alignment with current operational practices. Manage hundreds to thousands of customer support tickets weekly to prioritize customer needs. Skills and Qualifications Data entry experience requiring a high degree of accuracy Able to read and understand discrete PO's and communication skills to resolve discrepancies Production operations mindset, embracing FIFO/MTO order management principles Experience collaborating with buyers for forecast and discrepancy resolution between ERP and CRM systems Strong web-based application skills for support ticketing Clear verbal and written communication skills Highly organized task management skills Excellent time management and efficiency focus Education and Qualifications High school diploma required Work experience within just-in-time-delivery Original Equipment Manufacturing preferred Inside sales experience preferred Hourly Range: $25.00 - $30.00 Benefits Employer paid Medical, Dental, Vision, and Life Insurance Two weeks of PTO (up to 3 weeks with tenure) with seven paid holidays 401k with up to 4% employer match Additional paid parental leave beyond state/federal offerings Quarterly catered lunch events for all employees RAM Mounts product discounts Position Status: Full Time Position Location: Onsite A drug screening will also be required (THC or Marijuana not screened during pre-employment test).

Descriptions & requirements Job Description Route Sales Representatives are critical to our success at FritoLay! Our Route Sales Representatives are responsible for delivering, selling, and merchandising FritoLay's complete line of products including Lay's, Doritos, Cheetos, Tostitos, Fritos, and many more to local stores including gas stations, dollar stores, and large grocery stores. As a Route Sales Representative, you drive a FritoLay truck to different stores, work independently to unload orders, merchandise product, and partner with store managers to increase sales, order, and maintain records throughout the day. Although you will start out as a Route Sales Representative for FritoLay, we are investing in helping you grow with us. This job can open the door to career opportunities with us or our parent company, PepsiCo. In this role, here are some of the frequent tasks you will be doing: * Learn the basics of the role in four to six weeks of dedicated driving and selling training with our amazing team members * Run routes for team members', experience different stores, and meet new customers * Grow sales on the route by building relationships, selling in displays, and completing national initiatives * Attain a route with set days off/schedule with time * Work in a fun, fast paced, and physical environment We operate 24 hours a day, so you may not have a typical schedule! Team members often work weekends and holidays. Our jobs are physical! If you have never worked in this type of role before, you should understand that you will be on your feet for the entirety of your shift. Here are the minimum qualifications of this job: * Be 21 years of age or older * Have a valid driver's license with proof of insurance and ability to obtain other licensures as required by state law * Be able to frequently lift 40 lbs. with or without a reasonable accommodation As a full-time team member, you are eligible to receive full company benefits. Here is a breakdown of what we offer: * Health care benefits including medical, dental, and vision * Retirement savings benefits such as 401(k) with Company match, company-funded retirement benefits, pension plans, and stock purchase programs * Vacation time, including two weeks after one year of continuous, full-time employment and eligibility for up to one week during first year of continuous, full-time employment * Ten paid holidays * Paid sick leave that adheres to Washington law All benefits are subject to eligibility terms described in applicable plan and policy documents Our application takes 20-25 minutes to finish on any device. Our mission is to get you in for an interview instead of jumping through hoops. Just keep an eye on your e-mail, and we will take care of the rest. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available [1] EEO is the Law & [2] EEO is the Law Supplement documents. View PepsiCo EEO Policy. Visible links 1. ********************************************************************************** 2. ******************************************************************************************************

Inside Sales / Project Estimator Greer Tank LLC | Lakewood, WA | Full-Time Greer Tank LLC is a 70+ year leader in steel tank manufacturing and custom fabrication, serving critical infrastructure, industrial, and commercial markets across the West and Alaska. We are growing and looking for a motivated Inside Sales / Project Estimator to join our Lakewood team. This role is ideal for someone who enjoys working with customers, reviewing project specs, building accurate estimates, and helping drive projects from opportunity to award. What You'll Do Prepare detailed cost estimates and proposals for tanks, structural steel, and custom fabrication projects Review drawings, specifications, and bid documents to develop accurate scopes and pricing Work closely with customers, engineers, and internal teams to clarify requirements and timelines Support the sales process from initial inquiry through project award and handoff to production Track quotes, follow up with customers, and help improve win rates Collaborate with production, purchasing, and management to ensure pricing reflects true costs and capacity Maintain accurate records in our ERP and quoting systems What We're Looking For Experience in inside sales, estimating, or project coordination (manufacturing, fabrication, construction, or industrial preferred) Ability to read and interpret drawings and specifications Strong attention to detail and organizational skills Comfortable communicating with customers, engineers, and internal teams Proficient in Excel and general computer systems (ERP experience a plus) Self-motivated, team-oriented, and committed to quality and follow-through Why Greer Tank Stable, growing company with deep roots and a strong reputation for quality Opportunity to work on meaningful, real-world projects (infrastructure, fuel systems, industrial facilities, etc.) Team-oriented culture with a strong emphasis on safety, craftsmanship, and continuous improvement Competitive compensation and benefits package Long-term growth opportunities as the company continues to expand Location: Lakewood, WA Type: Full-Time, Onsite If you enjoy being at the center of the action - working with customers, building projects, and helping turn opportunities into reality - we'd like to hear from you. Apply via LinkedIn or send your resume to ********************

We are hiring Gear Machinists at our state-of-the-art facility in Seattle, WA. We have a compelling reputation in the industry and are adding Gear Cutters and Gear Grinders to our team. We supply custom and prototype gears, shafts, splines, housings and other geared components and assemblies to major customers within defense, energy, aerospace, mining and more. Customers rely on us for our speed and precision, we need additional personnel to keep our reputation flying high. Responsibilities: Set up and run large gear projects on a CNC 2600 Hofler Grinder, 700 Hofler Grinders, 1600 Pfauter Grinders, Manual Shapers and Hobbers. Read and interpret complex blueprints and set up sheets. Work with a variety of materials including plastics, aluminum, titanium, stainless steel, carbon steel, tool steel and more. Run other related machines when needed, manual and CNC horizontal and vertical mills, and lathes. Perform quality checks on gears adhering to very tight tolerances. Qualifications: Experience grinding parts to tight tolerances (gears, shafts and splines). Experience gear grinding or OD/ID grinding. Have at least 5 - 10 years setting up and running gear manufacturing machinery. Be well versed in gearing methodology and quality assurance procedures. Working knowledge in gear geometry and terminology. Working knowledge of geometric dimensioning and tolerances. Ability to work independently without supervision. Bring ideas to the table to tackle complex machining challenges daily. This position is crucial to our continued success, you will be joining an accomplished and professional gear manufacturing team. Adding skills and expertise to our team but are also willing to take someone with basic knowledge to the next level as long as you are willing to challenge yourself and learn. If you feel we could provide an environment for you to thrive and wish to be recognized for the positive impact, you can bring, apply online. Diversity and equity are important values for us, and we encourage all qualified applicants to apply, regardless of race, gender, religion, sexual orientation, or disability. Position is subject to export control regulations as defined in 22 CFR 120.62

Descriptions & requirements Job Description Detailers are critical to our success at FritoLay! Our Detailers are responsible for merchandising FritoLay's complete line of quality products in local stores. As a Detailer, you will drive your personal vehicle to a variety of store locations, retrieve Frito-Lay products from the backs of stores, and ensure that our products are both fresh and attractive to our customers when out in the store. This is the perfect role for someone who is interested in part-time work! Although you will start out as a Detailer for FritoLay, we are investing in helping you grow with us. This job can open the door to career opportunities with us or our parent company, PepsiCo. In this role, here are some of the frequent tasks you will be doing: * Driving to assigned locations in your personal vehicle (we'll provide mileage reimbursement while you're on the clock) * Checking in and out with manager on duty * Merchandising cases from the back room to the sales floor, filling display units or shelves with products * Rotating products and removing defective and out-of-date products * Tidying up shelves and displays, knocking down boxes and disposing of any waste * Assembling and disassembling of temporary displays We operate 24 hours a day, which means you may not have a typical schedule, and our jobs are physical! We transform store aisles, end caps, and displays into works of art, from the lowest shelf to the highest shelf, so you can expect to be on your feet for a majority of your shift. Here are the minimum qualifications of this job: * You are 18 years of age or older * You will be required to work on weekends, holidays, as well as off shift * You have reliable or personal transportation to work * You have a have a valid driver's license with proof of insurance * You can repeatedly lift, carry, push, pull, and handle products with or without a reasonable accommodation * You are able to lift 15 to 40 pounds with or without a reasonable accommodation Our application takes 20-25 minutes to finish on any device. Our mission is to get you in for an interview instead of jumping through hoops. Just keep an eye on your e-mail, and we will take care of the rest. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available [1] EEO is the Law & View the [2] PepsiCo EEO Policy. References Visible links 1. ************* pepsicojobs. com/wp-content/uploads/sites/2/2025/12/EEO_is_the_Law.pdf 2. *************pepsicojobs.com/wp-content/uploads/sites/2/2025/12/2026-EEO-policy-All-ATS.pdf

Purpose Provides support for all leave of absence cases. Effectively coordinates all leave cases to include general administration, comprehensive case management, and program compliance with all related employment and leave laws. Performs exemplary customer service and assistance to team members, leaders, and HR. Key Responsibilities Effectively communicate the company's leave of absence policy, programs, and relevant laws to team members, HR, and management, in alignment and under the guidance of the Leave Manager Interpret and administer leave programs and policies in accordance with the applicable federal and state employment laws (FMLA, ADA, USERRA, Pregnancy Discrimination Act, etc.) Administer all aspects of leave programs. Provide extensive case management and coordinate administrative aspects of the cases Collaborate with human resources leadership, payroll, and compensation teams to research and resolve employee leave issues Analyze leave claims or requests, determines employee eligibility, and independently approves and/or denies leave cases based on relevant medical information and policy Coordinate and organize all medical information and ensures that HIPAA and Employee Privacy guidelines are closely monitored and effectively executed Document and track all leaves cases, as well as adjust time, pay, and employment status in the UKG WorkForce Ready system as needed Work closely with team members to ensure that all relevant completed medical documentation is submitted for timely review. Maintains appropriate contact with all team members on leave and coordinates all aspects of return to work for team members on leave Communicate any updates to management/HR on team member's leave of absence or return to work status as well as manages team member return to work or separation of employment Report and manage metrics and analytics for all leave cases. Present reports as requested Partners closely with HR on all leave cases Serve as backup and provide support to on-site human resources for operations team member leaves Manages STD/LTD programs in conjunction with the benefit team. Ensures that all disability claims are coordinated with FMLA or general medical cases Serve as the point of contact for the appeal process with the State of Oregon for Family Paid Leave appeals, or similar programs Assists in the creation and facilitation of leave administration training Other duties as assigned Model Company core values Required Qualifications 2+ years of HR, Benefits, Leave Administration/Management or related experience Preferred Qualifications Experience in multiple state leave administration Bachelor's degree in Human Services, Human Resources, or related field PHR/SPHR Certification Completion of specialized certification or training on FMLA/leave administration About Roseburg Forest Products Founded in 1936, Roseburg Forest Products is a privately held company based in Springfield, Oregon. With a legacy in sustainable forestry and innovative wood products manufacturing, we are a leading North American producer of engineered wood, exterior trim, plywood, lumber, and medium density fiberboard (MDF). Our products shape and support homes, workplaces, and industries, while our timberlands protect forest health for future generations and provide high-quality wood fiber for our integrated operations. At Roseburg, we believe in making lives better from the ground up through the products we create, the relationships we build, and the communities we support. Our team of passionate professionals value safety, integrity, and excellence in all we do. From the mill to the forest to the office, you'll find opportunities to grow and contribute to a company that cares for people, communities, and the environment. Learn more about who we are and what we do at ***************** Benefits at Roseburg Roseburg offers a comprehensive and competitive benefits package to support the health, financial security, and well-being of our team members and their families. Key benefits include: Bonus opportunities based on company and individual performance 401(k) with up to 4% company match and 3% automatic company contribution Vacation starting at 3 weeks and 11 paid holidays per year Company-sponsored medical, dental, and vision insurance Company-paid life, AD&D, and long-term disability insurance options Mental health benefits for the entire family, including 8 free annual sessions per person Wellness programs and incentives, including biometric screenings & wellness challenges Paid time away from work for illness or injury, as well as paid parental bonding time Health Savings Account (HSA) with company contributions and Flexible Spending Account (FSA) options Company match for charitable contributions Education assistance and professional development support Financial and retirement counseling Additional voluntary benefits including pet insurance, student loan refinancing, and exclusive scholarships for child dependents, and more! AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

As the Sr. Sourcing Specialist for Soft Goods (Apparel) at Teton Outfitters, you will be responsible for overseeing sourcing, factory relationships, costing and production execution for all assigned apparel categories, including but not limited to outer layer garments (jackets, pants, shells), second-layer warmth products (fleece, insulation, mid-layers) and baselayer. This role may have direct management of one or two team members focused on purchasing/production planning activities. You will work directly with suppliers to ensure they deliver on Teton Outfitters' core priorities: Delivery, Quality, Cost, Innovation, and New Product Development (NPD) support. This role requires a blend of sourcing expertise, production management, and technical product knowledge to ensure the successful launch and scaling of hard parts and accessories. ESSENTIAL DUTIES & RESPONSIBILITIES: Factory Relationship Management Serve as the day-to-day contact for assigned factories. Build and maintain partnerships that drive supplier accountability for quality, compliance, and delivery. Conduct onsite factory visits and audits to validate compliance and maintain approved supplier status. Production & Execution Manage sourcing and production timelines to meet seasonal delivery targets and quality standards. Partner closely with Product Development and Quality teams from concept through bulk production. Identify and resolve factory-level issues impacting quality, delivery, or manufacturability. Innovation & Technical Fabric Development Support factory innovation efforts, driving adoption of optical and protective technologies as well as new innovations for accessories. Communicate supplier innovations and capabilities to internal stakeholders. Collaborate with development teams to bring new protective and performance technologies to the market. Supplier Performance & Cost Management Implement supplier scorecards to track cost, quality, and delivery performance. Analyze cost scenarios to support strategic sourcing decisions, cost savings initiatives and margin improvements goals. Negotiate vendor agreements with a focus on cost efficiency, quality consistency, and long-term competitiveness. Conduct tariff and duty (HTS) analysis to inform sourcing decisions. Capacity & Planning Oversee supplier capacity in alignment with Teton Outfitters' 3-5-year product roadmap. Support contingency planning by identifying and mitigating supply chain risks. Provide sourcing insights for seasonal and long-range planning. Continuous Improvement & Project Management Identify and facilitate process improvement projects, training/workshops to drive through various Lean methods Conduct root cause analysis to determine metrics, troubleshoot, operations, assembly issues, material flow, project plans, production capacity, facility design and create process documentation Identify, prioritize, plan, and execute improvements in an organized, efficient, and effective manner SKILLS & KNOWLEDGE QUALIFICATIONS: 5+ years of experience in sourcing, production, or supply chain management within soft goods is required (technical apparel preferred) Bachelor's degree in Supply Chain, Business Administration, Sourcing, or another related field is required. Strong background in waterproof/breathable fabrics, protective textiles, and insulation technologies. Experience leading a direct report is preferred. Broader outdoor apparel knowledge (hunting, skiing, camping, hiking, etc.) is a plus but not required. Proven success managing factory relationships, supplier negotiations, and production schedules. Ability to manage multiple projects across seasonal calendars. Strong analytical and problem-solving skills. Excellent communication and cross-functional collaboration skills. Innovation Focus: Ability to identify and implement new protective, technical, and performance-driven innovations with suppliers. Achievement Orientation: Commitment to high-quality, on-time delivery aligned with Teton Outfitters' standards. Collaboration & Partnership: Skilled at working cross-functionally and aligning supplier execution with internal needs. Technical Expertise: Deep understanding of apparel manufacturing, waterproofing, and protective garment construction. Cultural Awareness: Experience managing international supplier relationships and factory networks. WORKING CONDITIONS & LOCATION: Based in Rigby, Idaho - hybrid work environment (3 days in-office required - Tuesdays, Wednesdays, and Thursdays). May travel multiple times annually to global manufacturing partners and suppliers, up to 2-3 weeks at a time.

Complete fleet inspections on transportation equipment and report issues to supervisor. Analyze transportation and distribution systems and procedures to ensure efficient and economical delivery. Help with regulatory safety and compliance areas, such Manager, Fleet, Transportation, Equipment Maintenance, Manufacturing

We are seeking a highly skilled and experienced individual to support our Sage X3 ERP system and RFGen Warehouse Management System (WMS). The ideal candidate will have a strong understanding of both Sage X3 and RFGen, as well as experience with ERP/WMS integrations and warehouse operations. This role offers the opportunity to make a significant impact on our business by ensuring the smooth and efficient operation of our core business systems. Join Klauer Manufacturing as a Software Engineer and play a key role in a pivotal phase of our digital transformation. This is a unique opportunity to contribute to the development and implementation of our new ERP system, helping to shape the technology that will support our growing business for years to come. You'll be part of a collaborative team focused on bringing this project across the finish line; delivering solutions that streamline operations, enhance performance, and support our long-term success. If you're passionate about solving complex problems and making a tangible impact, we'd love to hear from you. What does Klauer ask of you? - Essential Duties of the Software Engineer: RFGen Development and Customization: Design, develop, and customize RFGen applications to meet specific business needs, including barcode scanning, inventory management, receiving, put away, picking, packing, shipping, and other warehouse processes. Integration with Sage X3: Develop and maintain integrations between RFGen and Sage X3, ensuring seamless data flow between the two systems. Collaborates with end users and other stakeholders to assess usability needs, requirements, and specifications for the requested program or application. Analyzes existing program logic to identify causes of program malfunctions; modifies program logic to eliminate problems or increase the operational efficiency of the program. Designs and programs applications and software to meet identified needs and coordinates with project owners to ensure timelines are met. Performs diagnostic testing on programs, which may include reading code or running diagnostic software to detect syntax or logic errors. Modifies, replaces, or removes code to resolve problems and errors. Facilitates installation of software and monitors performance and effectiveness after installation. Creates and/or modifies end-user documentations, training documents and technical documents. Provide training to end users on the effective use of applications and programs. Maintains knowledge of trends and developments in related areas of technology and programming. Develop, optimize, and troubleshoot complex SQL queries, stored procedures, functions and SSIS packages. Develop and manage Power BI and SSRS reports. Expertise in the Microsoft technology stack. This position will assist in enhancements of new and existing systems and entire end-to-end system development utilizing .NET, C#, VB, REST API, and SOAP protocols. Integrate, manage, and maintain wireless mobile data collection operations and processes, including integration with the ERP system. Highly organized and diligent, with attention to detail and follow-through to complete unsupervised tasks. Be able to work effectively both without guidance and as a team. Knowledge of how to effectively deal with department heads and team members, some of whom will require high levels of patience, tact, and diplomacy. Required Experience: 5 or more years of programming experience. C#, VB, and REST API ideal 5 or more years of experience with Microsoft SQL Server 1 or more years of experience with Power BI and/or SSRS report Experience with any ERP, MES and/or WMS systems. Required Education: Advanced education in computer science, or related field or (or equivalent experience or certifications). Who is Klauer Manufacturing Company? Founded in 1870, Klauer was built on hard work, quality products, and service. Our mission is to enable our customers in the building products industry to win through the quality, consistency, and predictability of everything we do. We have three locations in Dubuque, IA and one location in Tomball, TX, where our goal is to provide our employees with a safe and family-oriented work environment for our employees. As a team, we maintain our mission through our cultural values and company priorities: safety, attitude, effort, and accountability. What can you expect from Klauer Manufacturing? You can expect to feel part of the Klauer Manufacturing family, which is inclusive, regardless of gender, background, disability, or status. We offer a generous benefits package for all team members, including work-hour flexibility, health, vision, dental, company-paid life insurance, short-term and long-term disability, 401(k) retirement plan, 10 paid holidays, 3 weeks vacation, paid funeral leave, and paid jury duty. PHYSICAL DEMANDS: Standing, walking, pushing, pulling, bending, and stooping. The strength rating for this job is L - Light Work - exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects. There are more physical requirements than those for sedentary work. Class II - Light (Dictionary of Occupational Titles 4th Edition Vol. I & Vol. II)

We are seeking a skilled CNC Mill programmer specializing in Mills to work from supplied documentation to create programs, manufacture one off and prototype components for a multitude of applications across a variety of industries. We have a strong history in the machining market in Seattle with our campus covering over 250,000 square feet of manufacturing space. You will be challenged with exotic metals, prototypes, gears, splines, and other unique projects every day. Responsibilities: Write and/or modify CNC programs and instructions for Mill, and multi-axis / mill-turn machined parts utilizing Siemens NX. Ability to write and / or modify programs for weldments, assemblies and billets. Analyze job orders, drawings, blueprints, specifications, and design data to determine the appropriate machine tool, work holding and cutter selection. Coordinate program start-ups in manufacturing, assist in troubleshooting and provide recommendations for manufacturability. Observe machine trial runs or conduct computer simulations to ensure programs and machinery function as needed. Skills: 5 - 10 years CNC Mill programming. Previous experience working in a job-shop manufacturing environment. Expert hands-on knowledge of CAD/CAM and Siemens NX software operation. An expert level of programming prototype / one off components on 3 and 4-axis mills, and multi-axis mill-turn machines. Working knowledge of tool path creation, speeds/feeds, cutting tool selection Professional approach; collaborating with other team members ensuring accuracy, manufacturability, and continuity. High level of competency in all areas of shop math, machine controls, materials, and tooling. This is an opportunity for you to challenge yourself and get better at what you do every day. It will not be easy but will put you in a position to become a valued member of our team, working on cutting-edge parts and technology. Are we talking about you, apply on-line, or email your resume to ************************** or call on ************.send us your resume for consideration. Diversity and equity are important values for us, and we encourage all qualified applicants to apply, regardless of race, gender, religion, sexual orientation, or disability . Position is subject to export control regulations as defined in 22 CFR 120.62

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Schuyler, NE Job Type: Full Time Shift(s) Available: 2nd Compensation: $38.00/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Daily Engagement of workforce through direction of work assignments, compensation, communication, recognition, development and coaching, etc Manage the workflow process associated with electronics and some electromechanical areas of the facility, including the ASRS system Develop preventative maintenance procedures to maintain equipment associated with electronics and limited electromechanical equipment throughout the facility; including the management of parts inventory and corrective actions Manage safety culture through training and observations Liaison to contractors and Utilities department for projects and work orders Develop and update PLC and HMI programs as required based on established guidelines and controls for this type of equipment Ensure compliance of our measuring devices (i.e. Packers and Stockyards and Nebraska Department of Weights and Measures) Responsible for department budget, including labor and operating expenses Required Qualifications Legal to work in the US without the need of a Visa sponsorship Must be 18 years or older 2 year degree or better in electrical or electromechanical technologies or 3 years of experience with industrial process controls and industrial networking Competency in basic electrical 24 and 120 volt AC and DC circuits Basic knowledge of Windows XP/7 operating systems Ability to read, write and speak English Preferred Qualifications Experience in food processing environment Proficient in Allen-Bradley PLC Programming and troubleshooting, RsLogix 500/Control Logix 5000, Factory Talk View Install and trouble shoot Industrial Networks- Ethernet base and components Ability to read and interpret schematics, general machine installation and repairs Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Job DescriptionBenefits: Dental insurance Health insurance Opportunity for advancement Training & development Vision insurance Were transforming the way people think about automotive sales and were looking for passionate, service-minded professionals to join our team. At Bay Area CDJR, our Guest Experience Consultants arent traditional salespeople. Theyre trusted partners who create authentic connections, guide guests through a transparent process, and help them make decisions with confidence. What We Believe: We operate by our REAL values: R Respect Always: Treat people the way we want to be treated. E Empower People: Create an environment where everyone can thrive. A Act with Integrity: Do the right thing, even when its hard. L Lead with Transparency: Build trust through honesty and openness. What Were Looking For: Strong communicators with a genuine desire to help people Goal-oriented professionals who value excellence and growth Learners who want to develop into elite performers in the automotive space Team players who bring positivity, reliability, and purpose every day What We Offer: Competitive pay with performance-based growth Clear career path and advancement opportunities Comprehensive training and mentorship A culture built on authenticity, accountability, and fun If youre ready to build a career not just a job and want to join a dealership thats doing things differently, wed love to hear from you. Apply today and become part of the REAL difference at Bay Area CDJR.