Construction labour jobs in Little Rock, AR

Contractor's Specialty Service Company is the Arkansas contractor of choice for temporary and permanent pavement marking and marking removal services. Our services include long line thermoplastic and paint striping, detail and parking lot striping, airport striping, decorative crosswalks, and pavement marking removal. Through a combination of highly trained staff and state-of-the art equipment, CSSC is able to exceed the expectations of our government, contractor, and private business customers. DUTIES AND RESPONSIBILITIES: · Manually load or unload equipment, materials, or supplies · Assist with layout of roadway markings. · Correctly load and secure all loads. · Drive assigned vehicle/equipment as directed to and from job site. Including daily pre-trip inspections of assigned truck and log keeping, as required. (eligible drivers only). · Perform roadway preparation, including grinding, sealing, tape removal, as directed. · Once Flagger certified, assist in traffic control as directed. · Assist in maintenance of assigned equipment. · Responsible for maintaining assigned PPE and having proper PPE on hand for scheduled work. · Participate in all required safety training including weekly Toolbox Talks. · Clean and organize warehouse, shop, yard, office, and vehicles to maintain a clean, safe work environment. · Responsible for reporting all incidents you are involved in or witness to the Safety Director as per company training and incident reporting protocols. · Other duties as assigned MINIMUM QUALIFICATIONS: · High school diploma or equivalent · Must successfully complete a pre-employment background check, motor vehicle report, and drug screen. Random drug screens are also performed post-employment. · Must possess a current Driver's License; Commercial Driver's License (CDL B) preferred · Must be able to work a flexible schedule with overtime, nights, and weekends as the job requires · Must be at least 21-years of age to meet driver's insurance eligibility requirements for company vehicles · The physical ability to immediately respond to emergency situations. · Must meet the eligibility requirements of the company Fleet Policy to be a company sanctioned driver. SKILLS AND KNOWLEDGE: · Must possess good interpersonal skills. · Good communications skills, both written and oral. · Ability to apply concepts of basic math. · Ability to manage time between two or more projects at one time. · Ability to read and comprehend instructions and procedures. · Possess minimum ability to read a tape measure. · The ability to apply knowledge and skills to achieve intended results. · Must successfully complete company provided First Aid, CPR, AED, and Flagger training/certification · If required, must successfully complete company provided Forklift training/certification - understand you are not permitted to operate company forklift until certification is received. · Must successfully complete company provided Traffic Control training/certification · If required, must successfully complete company provided Smith Driving training/certification (eligible drivers only) Job Type: Full-time Expected hours: No less than 40 per week

Qaqaq Construction is seeking a General Laborer to support various physical tasks on construction sites. Responsibilities include site preparation and cleanup, trench digging, scaffolding setup, demolition, and debris removal. The role also involves loading and distributing materials, tools, and equipment to designated areas. May operate a range of hand and power tools such as air hammers, tampers, cement mixers, hoists, and measuring instruments. This position may also assist skilled trades and perform other duties as assigned. **Responsibilities** Essential functions will include: + Clean and prepare construction sites to eliminate hazards. + Erect and dismantle scaffolding, shoring, braces, traffic barricades, ramps, and other temporary structures. + Load, unload, and distribute building materials, tools, and machinery to appropriate locations. + Measure, mark, and record layout dimensions for construction activities. + Operate pumps, compressors, or generators to power tools, equipment, or move materials. + Mix, pour, and spread concrete using portable cement mixers. + Control and direct traffic around work zones. + Dig trenches or ditches, backfill excavations, and compact or level earth using hand and pneumatic tools. Knowledge and Critical Skills/Expertise: + Proficient in the use of hand and small power tools. + Understanding of construction materials, methods, and tools used in building and repair work. + Strong commitment to working safely and following all company policies and procedures. + Awareness of workplace safety standards and hazards. + Ability to operate tools and perform tasks in compliance with OSHA regulations. + Reliable attendance and punctuality. + Capable of working independently with minimal supervision. + Able to follow verbal and written instructions accurately. + Works effectively as part of a team. + Demonstrates professionalism and respectful interaction with coworkers and clients. **Qualifications** Minimum Qualifications: + At least 1 year of general labor or construction experience. Physical and Mental Demands: + Occasionally lift, push, or pull 50-100 lbs; frequently lift, push, or pull up to 20 lbs. + Frequent bending, squatting, crouching, crawling, and kneeling. + Ability to climb stairs, ladders, scaffolding, and ramps safely. + Prolonged standing for intervals of 2-3 hours. + Work at various physical levels (waist, eye, overhead). + Maintain balance on uneven surfaces and around obstacles. + Sufficient handgrip strength and coordination to operate tools and equipment. + Proper use of personal protective equipment (PPE) in compliance with OSHA standards. + Able to respond to verbal and audible instructions. + Adequate vision for construction tasks. + Comfortable working at heights over 12 feet using ladders, scaffolding, or man lifts. + Full range of motion including overhead, lateral, and downward reaching. + Ability to perceive physical characteristics (e.g., size, shape, temperature, texture) with hands and fingers. + Ability to rotate head and torso side-to-side and around vertical axis. + Perform physically demanding tasks involving full-body movement, such as climbing, lifting, balancing, walking, and material handling. + Use of hands and arms for installing, positioning, and moving materials and equipment. Working Conditions: + Exposure to extreme temperatures, including hot and cold weather. + Regular exposure to wet or humid conditions, moving mechanical parts, and outdoor environments. + Frequent work at heights and in areas with fumes or airborne particles. + High noise levels are common; hearing protection may be required. + Required to wear appropriate personal protective equipment (PPE) at all times. + Work is performed on active construction sites, often in close proximity to moving equipment. \#LI-WW1 Applicants may be subject to a pre-employment drug & alcohol screening and/or random drug screen, and must follow UIC's Non-DOT Drug & Alcohol Testing Program requirements. If the position requires, an applicant must pass a pre-employment criminal background history check. All post-secondary education listed on the applicant's resume/application may be subject to verification. Where driving may be required or where a rental car must be obtained for business travel purposes, applicants must have a valid driver license for this position and will be subject to verification. In addition, the applicant must pass an in-house, online, driving course to be authorized to drive for company purposes. UIC is an equal opportunity employer. We evaluate qualified applicants without regard to race, age, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other protected characteristics EOE/D/V. In furtherance, pursuant to The Alaska Native Claims Settlement Act 43 U.S.C. Sec. 1601 et seq., and federal contractual requirements, UIC and its subsidiaries may legally grant certain preference in employment opportunities to UIC Shareholders and their Descendants, based on the provisions contained within The Alaska Native Claims Settlement Act. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. All candidates must apply online at ****************** and submit a completed application for all positions they wish to be considered. Once the employment application has been completed and submitted, any changes to the application after submission may not be reviewed. Please contact a UIC HR Recruiter if you have made a significant change to your application. In accordance with the Americans with Disabilities Act of 1990 (ADA), persons unable to complete an online application should contact UIC Human Resources for assistance (******************************************** The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) UIC Government Services (UICGS / Bowhead) provides innovative business solutions to federal and commercial customers in the areas of engineering, maintenance services, information technology, program support, logistics/base support, and procurement. Collectively, the fast-growing Bowhead Family of Companies offers a breadth of services which are performed with a focus on quality results. Headquartered in Springfield, VA, we are a fast-growing, multi-million-dollar company recognized as a top Alaska Native Corporation providing services across the Department of Defense and many federal agencies. Bowhead offers competitive benefits including medical, dental, vision, life insurance, accidental death and dismemberment, short/long-term disability, and 401(k) retirement plans as well as a paid time off programs for eligible full-time employees. Eligible part-time employees are able to participate in the 401(k) retirement plans and state or contract required paid time off programs. **Join our Talent Community!** Join our Talent Community (************************************************************************ to receive updates on new opportunities and future events. **ID** _2025-24135_ **Category** _Construction_ **Location : Location** _US-Remote_ **SCA Hourly Rate** _USD $40.25/Yr._ **Travel Requirement** _N/A_

Join the Snyder Environmental Family as a Construction Worker - Demo & Abatement Are you ready to make a real difference while building a rewarding career in a skilled trade? At Snyder Environmental, the premier environmental remediation firm of the central south, our Construction Workers are the first on site for commercial demolition and renovation projects-removing hazardous materials and making public spaces safer for everyone. From schools and hospitals to military installations and critical infrastructure, our work matters. We believe in doing well by doing good. That's why we offer competitive pay $20 to $25 per hour based on experience-plus $40 per diem and paid lodging when traveling. Our team members average 40+ hours per week, enjoy paid time off, and are treated like family. We invest in your well-being with up to 90% employer-paid health insurance, dental, vision, and company-paid life insurance. As a growing company, we foster advancement and provide opportunities for you to build your future with us. This position requires an asbestos abatement license, which we will provide at company expense if you do not already have one. To join our team, you must have reliable transportation, valid authorization to work in the United States, and the ability to obtain clearances for access to sensitive government facilities. If you have the skills, certifications, and drive to work in challenging environments-and want to be part of a company that values your contribution-Snyder Environmental is the place for you. Business Group/Dept: Operations FLSA: Non-Exempt Reports To: Supervisor Date: February 14, 2022 Purpose of the Position Safely and efficiently identify, remove, pack, transport, or dispose of hazardous materials, including asbestos, lead-based paint, waste oil, fuel, transmission fluid, radioactive materials, or contaminated soil. Safely demolishes structures using hand tools or mechanical equipment as assigned. Essential Position Responsibilities Removes asbestos from ceilings, walls, beams, boilers, and other structures, following hazardous waste handling guidelines and following safe demolition techniques. Assembles scaffolding and seals off work area, using plastic sheeting and duct tape. Positions mobile decontamination unit or portable showers at entrance of work area. Builds connecting walkway between mobile unit or portable showers and work area, using hand tools, lumber, nails, plastic sheeting, and duct tape. Positions portable air evacuation and filtration system inside work area. Sprays chemical solution over asbestos covered surfaces, using tank with attached hose and nozzle, to soften asbestos. Cuts and scrapes asbestos from surfaces, using knife and scraper. Shovels asbestos into plastic disposal bags and seals bags, using duct tape. Cleans work area of loose asbestos, using vacuum, broom, and dustpan. Places asbestos in disposal bags and seals bags, using duct tape. Dismantles scaffolding and temporary walkway, using hand tools, and places plastic sheeting and disposal bags into transport bags. Seals bags, using duct tape, and loads bags into truck or dumpster. Follows directions of foremen, supervisors, and managers. Physical activities: Must be on feet for up to 10 hours per day; must have unrestricted clearance to wear a respirator up to 10 hours a day with few breaks; regular standing, sitting, kneeling, twisting, bending; must be able to push, pull, lift, and carry up to 20 pounds constantly and up to 50 pounds occasionally; must be able to work in extreme hot/cold, wet/dry environment; must be able to perform repetitive motions such as scraping, sanding, shoveling Personal Protective Equipment (PPE): Half-face respirator; full-face respirator; steel toed footwear; hard hat; safety vest; protective eyewear; gloves; Tyvek suit Safety Sensitive: Yes Travel: 25% to 75% Licenses/Certifications Required: Asbestos Worker Initial Certification; Current Asbestos Worker Refresher; Current State Specific Asbestos Worker License; Current Valid Physician's Assessment; Current Respirator Fit Test Preferred Education/Certifications: High School Diploma or GED; OSHA 10 or Higher

CDM Smith is looking for Inspectors to provide independent, professional construction inspection and oversight of Federal Construction Projects with agencies such as USACE, AFCEC, and NAVFAC. This is a pipeline requisition for future projects. The Construction Inspection Specialist documents inspection findings and communicates issues to project leadership. The role requires applying broad professional knowledge of construction practices to meet client needs, clearly communicating project progress and issues to diverse functional teams and project leadership, and ensuring projects are delivered successfully, safely, and in compliance with applicable requirements. Work is performed independently under limited supervision. Job Duties: - Conducts on-site inspections of construction, rehabilitation, and maintenance projects as well as related civil structures (roads, dams, bridges, facilities, utilities, etc.) to verify compliance with approved design specifications, industry standards, safety codes, and applicable federal regulations. - Documents inspection results inclusive of deficiencies, deterioration, structural condition, deviations between design and execution of construction, required corrective actions and any needed sampling. - Review contractor submittals, RFIs, shop drawings, and material certifications in coordination with engineers and project management teams. - Monitors construction progress, prepares and maintains detailed daily reports, deficiency notices, project status reports, and technical recommendations. - Inspects and verifies construction materials and testing processes (concrete breaks, compaction testing, welding/joint inspections, pressure testing, etc.) to ensure compliance with specifications and standards - Oversees and coordinates field construction related services on projects, enforcing adherence to safety, environmental, quality control, and permitting requirements - Conducts site investigations, reviews relevant data including maps, reports, test results, drawings and others as required. - Participates in pre-construction meetings, design reviews, technical assessments, safety meetings, and project closeout/punch list activities. - Ensures compliance with guidelines and regulations including permits, safety etc. and delivers technical files and other technical documentation as required. - Develops, trains, and mentors junior construction professionals, provides technical direction, and serves as a liaison between contractors, engineering staff, and client. - Performs other duties as required. \#LI-LP2 **Job Title:** Construction Inspection Specialist (Flex Staff) **Group:** FSI ENT WFT Field **Employment Type:** Temporary **Minimum Qualifications:** - High School Diploma - At least 5 years of relevant construction experience. Domestic travel is required. Overseas travel is also possible. **Preferred Qualifications:** - Prior Federal or DoD project experience (NAVFAC, USACE, or Air Force CE) is highly desirable - Experience in vertical (facilities/buildings) and horizontal (utilities, waterfront, airfield, infrastructure) construction is desired - Knowledge of federal acquisition and contracting practices. - Familiarity with UFGS specifications, UFC design criteria, and EM manuals. - Familiarity with electronic systems such as eCMS, RMS/QCS, or other QA tools. - OSHA 30-Hour Construction Safety and Health - Construction Quality Management (CQM) for Contractors **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 100% **Assignment Category:** Fulltime-Temporary **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Must be a U.S. citizen. - Able to pass a federal background check. - Proficient in interpreting engineering drawings, specifications, and contract documents. - Demonstrates knowledge and understanding of the construction process for large commercial, municipal or federal projects. - Strong organizational skills to balance and prioritize work. - Excellent attention to detail. - Familiar and comfortable to work on computers/tablets/phones. - Strong technical writing and oral communication skills and ability to interface with contractors, engineers, and federal clients. - Ability to work with multiple stakeholders. - Ability to work independently in field conditions with minimal direction. - Good interpersonal skills to cultivate relationships with colleagues, customers, and partners. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $27.30 **Pay Range Maximum:** $54.60 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Successful candidate will be required to work 100% in the field locations. **Driver's License Requirements:** An appropriate and valid driver's license is required. **Seeking candidates for a potential future opportunity!:** We are looking for qualified candidates for this position in anticipation of future project opportunities. Please note this is an "Evergreen" position which will be used to build our candidate pool but is not a role that is open at this time. If you are interested in being considered for this position should this position become available, we encourage you to apply to be part of our talent community. By having your information on file, we can reach out to you when this or a similar role officially opens. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

About Us We design, install, and maintain advanced electrical systems. Our expertise spans traditional electrical contracting, security solutions, audio-visual integration, wireless networking, and building management systems. Miller Electric is seeking an Entry level Electrical Construction helper with 0- 2 years of hands-on experience in the electrical trade. The ideal candidate is motivated, safety-conscious, and eager to continue building their technical skills under the supervision of journey - level electricians. Benefits may vary due to local union agreements Essential Duties & Responsibilities * Assist Journeyman electricians required for the repair, maintenance, installation, and modernization of electrical systems for buildings, equipment and grounds * Pull wire, bend conduit, and install devices, panels, and fixtures * Willing to learn how to read and interpret basic electrical drawings, blueprints, and schematics * Maintain a clean and organized work environment, ensuring tools and materials are properly stored * Follow OSHA and company safety procedures at all times * Support team members by providing accurate measurements, cutting materials, and preparing equipment as needed * Ensure work completed and able to communicate effectively with supervisors and coworkers * Performs other duties as may be required. * Perform manual labor as required that may include: * Manual excavation * Bending Pipe * Pulling wire * Lifting 50 pounds * Working with hands overhead * Using heavy equipment * Using power tools Qualifications * Minimum of 0-2 years' experience as an electrical construction experience * Ability to use hand and power tools safely and effectively * Strong work ethic and willingness to learn new skills * Reliable transportation * Ability to work in a physically demanding environment (lifting, climbing, standing for long periods) * Commitment to safety and attention to detail Preferred Qualifications: * Willing to obtain OSHA 10 certification * Experience working on commercial projects Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

Job Details NORTH LITTLE ROCK, AR Full Time Not Specified Up to 25% Day Information TechnologyDescription About ATG USA ATG USA (Applied Technology Group) is the leading technology business partner focused on the Architectural, Engineering, and Construction (AEC) industry in North America. We are driven by a mission to be the preeminent AEC technology business partner, solving business challenges and driving outcomes through innovative technology and service solutions. Overview: The Presales Specialist plays a critical role in supporting sales productivity and deal flow by becoming an expert in our product lines and developing solutions that address customer needs. The Presales Specialist collaborates closely with sales, service, and technical support teams to drive revenue and growth within specialized business units supporting the Emerging Product Lines Team. This position reports to the Product Manager. Responsibilities: Proactively scope the product solution required to address customer requirements, assessing customer's met and unmet needs. Attend partner technical and sales training calls to ensure team is familiar with latest technical updates to products and to align on sales focus with hardware/software vendor. Recommend and adapt product line services as necessary to ensure appropriate support and customer satisfaction. Coordinate closely with internal sales and service resources to align solution design with customer business requirements. Secure commitments from customers needed to ensure deal closure. Provide coaching and professional development to sales team members to enhance their services knowledge, technical acumen, and services sales skills. Proactively pursue additional services opportunities within customer firms and collaborate with sales to effectively advance these opportunities. Meet assigned targets for profitable sales growth within emerging product line segments. Achieve assigned productivity and product growth targets for assigned product line. Monitor customer engagement on services solutions proposed throughout the sales process. Alert sales teams to potential risks of deal closure and proactively address any challenges. Qualifications: Bachelor's degree (preferred) Sales experience in a B2B customer segment, or a record of achievement and technical solution expertise in a comparable sales role. Strong relationship management and problem-solving skills. Excellent customer service and written/oral communication skills. Ability to effectively present information virtually and live, both one-on-one and in small group settings. Analytical skills with the ability to analyze data and draw insights. Ability to work in a fast-paced environment with occasional interruptions. Understanding of the AEC industry and its technology landscape (preferred). We work with some of the most progressive design firms throughout the architectural, engineering, and construction industries as not only their software vendor or licensed broker but their complete technical support team. Our award-winning service is provided by some of the industry's most experienced technology specialists, allowing our clients to get the most out of their technological investments. High-Earning Potential: Competitive base + uncapped commissions. Career Growth: We invest in people. If you bring the drive, we'll bring the opportunities. Training & Certifications: Use ATG's Greater U program to be the best version of yourself. Growth is an ATG cultural pillar. Cool Clients: Work with architects, engineers, designers, and construction professionals-people who are literally building the future. Culture That Wins: Fast-paced, supportive, and focused on celebrating wins (we mean it-we celebrate everything). Benefits That Work for You: At ATG USA, we invest in your well-being, growth, and life outside of work. Here's what you can expect: Health & Wellness Multiple medical plan options plus dental and vision coverage On-demand support and mental health/wellness resources via Bennie-your personal benefits concierge Financial Well-Being Health Savings Account (HSA) and Flexible Spending Account (FSA) options 401(k) with up to 4% company match after 90 days Voluntary life, AD&D, supplemental health coverage, and disability protection Extra Perks That Matter 3 weeks of PTO, paid holidays, and your birthday off 2 paid volunteer days each year to support causes you care about Professional development reimbursement + access to GreaterU, ATG's platform for learning and growth Four weeks of paid sabbatical after six years-on top of your regular PTO-to refresh and recharge! Discounts on lifestyle perks like pet insurance, financial coaching, and more via the Bennie Marketplace ATG is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex (including gender identity and sexual orientation), national origin, age, disability, genetic information, or any other protected status under applicable laws. We're committed to an inclusive workplace where all backgrounds and perspectives are valued, and we strive to build a team that reflects the diverse world we serve. This full-time role requires a minimum of 40 hours per week, with additional hours as needed to meet deadlines. Candidates must be able to sit or stand for extended periods, travel between office locations (including those with stairs), and lift up to 30 pounds. Strong verbal and written English communication skills, along with adequate visual and auditory abilities (with or without aids), are essential. The physical demands described are representative of those needed to perform the job's essential functions, with or without reasonable accommodation. If you need accommodation during the application or interview process-or on the job-please contact Human Resources. Applicants must be authorized to work in the U.S. without company sponsorship. We appreciate your interest in ATG!

CONSTRUCT YOUR CAREER WITH MEARS AND BUILD AMERICA'S FUTURE Are you looking for your next big opportunity? At Mears Group we offer more than just a job. We offer a career where you can grow, innovate, and make a real impact. Mears Group, Inc., a Quanta Services company, is a leader in the construction and infrastructure industry. With more than 50 years of experience, we are committed to safety, quality, and integrity. We bring together people and resources to build the framework that powers our nation. CONCRETE FINISHER We are looking for a Concrete Finisher. As a Concrete Finisher, you play a key role in building and restoring concrete structures like sidewalks, roads, and curbs, using both hand and power tools to ensure precision and durability. This physically active role requires attention to safety, weather readiness, and skill in shaping, sealing, and maintaining concrete surfaces. It offers a stable, hands-on career path with opportunities to grow in the infrastructure and construction industries. WHY JOIN MEARS? * Build America: Mears is a leading provider of engineering and construction solutions in oil and gas, electric transmission and distribution, telecom, and wastewater industries across North America. * Professional growth: Mears offers comprehensive training programs and career advancement pathways. * Competitive compensation: Enjoy competitive wages and excellent benefits. * Community impact: We give back to the communities we serve. SAFETY THAT BRINGS YOU HOME: At Mears, safety is our utmost priority. We are at the forefront of enhancing safety outcomes for both our employees and clients. We empower our workers to take ownership of their own safety. The Capacity Model is designed to minimize the risk of accidents and injuries. BENEFITS & COMPENSATION: Despite our size, Mears remains a family company. Our suite of benefits reflects our commitment to our employees. * Competitive wage * Job type: Full time * Paid on-the-job technical and professional growth opportunities * Established career path for future advancement * 401k and Roth 401(k) retirement savings plans * Health, prescription, dental, vision plans * Life & Disability Insurance plans * Financial wellness program * Employee assistance program * Employee discount programs ESSENTIAL DUTIES: * Create sidewalks, roads, curbs, etc. using a variety of hand and power tools * Must be able to align forms for sidewalks, curbs or gutters, patch voids and use saws to cut expansion joints * Perform job tasks in a safe manner in accordance with company policy * Use shovels, picks, axes, and machinery * Apply hardening and sealing compounds to cure the surface of concrete * Waterproofing, damp-proofing, and restoring concrete surfaces * Install anchor bolts, steel plates and other fixtures in freshly poured concrete * Perform general maintenance of construction equipment and vehicles * Ensure the proper use of personal safety equipment * Follow all health and safety regulations when operating equipment * Maintain a clean job site and to pick up all tools and equipment and secure the jobsite each day * Other duties assigned KEY QUALIFICATIONS: * Valid Driver's License * High school diploma or equivalent * Preferred experience within the Construction, Pipeline or Gas Distribution industry * Excellent reading skills to understand all construction warning signs * Flexible working hours * Physical activity for the role includes: * Exposure to variable weather conditions including hot and cold weather * Exposure to loud work environments * Standing, and walking for long periods, on variable terrain * Repeated lifting, pulling and carrying heavy objects up to 75 lbs * Repeated motions such as kneeling, crawling, climbing, and reaching overhead * Pass pre-employment drug screen and background check This position is subject to the Federal Department of Transportation (DOT) drug & alcohol testing regulations as outlined in 49 CFR Part 382 and/or 49 CFR Part 199. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

A General Laborer is responsible for safely and efficiently performing general labor duties at a hauling company, transfer station, materials recycling facility (MRF) or landfill. Responsibilities may include such things as yard clean-up, fueling vehicles and equipment, general vehicle operation, general office maintenance and other related duties. Key Responsibilities: • Clean up work areas • Fuel vehicles and equipment • Clean tracks on track type and related equipment • Perform yard work, including mowing and paper pick up • Operate general site vehicles and equipment, such as water trucks, pickup trucks, sweepers, mowers, trimming equipment, etc. • Work in accordance with Company and federal, state/provincial and local safety policies & procedures • Perform general office maintenance and repairs, including painting and janitorial work • Direct traffic at the site as necessary • Perform other duties and responsibilities as required or requested by management. Requirements: • High school diploma or general education degree (GED) desired, but not required. • Must be able to meet relevant criteria for safety sensitive functions according to Company standards Knowledge, Skills and Abilities: • Ability to read, write, perform basic mathematical calculations and communicate with others. • Ability to follow instructions and perform duties under limited supervision • Ability to operate any equipment necessary to perform job • Ability to apply common sense reasoning to solve general problems Physical/Mental Demands: • Must be able to stand, walk, bend, reach and lift in an outdoor environment 90% of the time. • Must be able to use hands and fingers, kneel, crawl, talk, hear, climb and balance. • Visual Requirements: include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. • Ability to manually lift/move up to 65 pounds regularly • Ability to manually push/move up to 100 pounds with assistance from another employee Working Conditions: • Frequently exposed to loud noise, humidity, rainy/stormy, extreme hot and cold weather conditions (depending upon season), moving mechanical parts, vibrations, toxic and caustic chemicals, fumes and airborne particles • Work in outdoor environment up to 100% of the time. • Works route away from branch location on a continuous basis throughout the day. • Occasionally work in high precarious places • Work in motor vehicle traffic conditions constantly. • Work environment is normally loud #GFLTalent We thank you for your interest. Only those selected for an interview will be contacted. GFL is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact *******************************

This position will coordinate job duties and delegate tasks to construction workers and sub-contractors. The position will work closely with construction managers, estimators and internal department to ensure jobs are completed on time. You will be a leader and help train more junior memebers of the crew. In this position you will not work a typical 8-5 shift. Hours may vary based on workload and customer need. You will be required to travel out of town for this position. Essential Functions: Monitor and maintain schedules for workers and sub-contractors; make sure the best skills are applied by each worker and ensure product installation requirements are followed accurately and efficiently. Ensure all safe work practices are followed at all times. Ensure safe housekeeping practices are followed at all times. Brief crew members on daily tasks and direct workers on assigned tasks. Track rental equipment, material needs and use, monitor labor and sub-contractor costs to maintain project budgets. Verify accuracy and compliance of tasks in progress to comply with codes, project specifications and manufacturer requirements. Document daily activities, material/parts used, testing, inspections and visitors. Create and maintain positive working relationships with crew members, vendors, suppliers, and sub-contractors to maintain a timely flow of supplies, materials and sub-contractor work. Ability to travel to job sites. Must be able to operate heavy equipment to dig ditches and manually install equipment. Work with concrete, framing, pouring, mixing, and finishing. Maintain positive working relationships with crew members, vendors, suppliers, and contractors to ensure deadlines are met. Experience, Competencies and Education High school diploma/GED 3-5 years construction experience running crews and sub-contractors. Preferabley Petroleum Construction. 40hr OSHA training is a plus. Equipment operation experience with operating Skid-Steer loaders, Min-x excavators and Rubber tire backhoes. Detail oriented. Strong communication skills. Must be a self-starter with strong leadership qualities. Ability to lift 75 -100 lbs. Ability to work outside during all types of weather. Benefits * Paid holidays • Paid vacation and sick time, Up to four weeks' vacation with tenure • 401K match • Health, Dental, Vision Insurance as well as supplemental coverages offered• Company-paid Life Insurance

Full-time Description We are a leader in Millwork, Cabinet and Fixture Installations seeking experienced and enthusiastic working Lead Finish Carpenters who can perform in a diverse range of situations overseeing and installing fixtures, casework and millwork in commercial and retail environments. “We have traveling positions available. If you are looking for stability, outstanding compensation and want to work for a Leader in our Industry, please contact us now.” Requirements Education: High School Diploma or Equivalent Experience: Five (5) years fixture installation and retail or commercial finish carpentry experience. One (1) year minimum supervisory experience. Certification(s): OSHA10 or 30, Forklift, aerial lift (Company will provide if necessary). Technology: Able to download and use APPS on phone and mobile devices. Able to make electronic submissions though company portal. Physical Demands: Ability to walk and stand for long periods of time, climb ladders, work from an aerial lift. Frequent bending, kneeling, twisting and squatting. Work with materials over your head for short durations. Able to lift and carry objects weighing up to 50 lbs. regularly. CONDITIONS OF EMPLOYMENT Must be able to pass a Drug Screening, Criminal Background Check and MVR screening for approved driving status. Must be able to complete a Company Sponsored CPR/First Aid Training course online. Available to work overtime as needed. Our typical workweek is 40 to 60 hours. Be flexible to work non-conventional shifts when required (some overnight projects may occur). Able to travel and be away from home for durations from 2-8 weeks depending on our contract. Must provide own basic hand tools and cordless drill. COMPENSATION AND BENEFITS PACKAGE Company provides Health, Dental and Life Insurance, Long term Disability Plan, 401k, Reimbursement for travel expenses, Travel Perks, Referral Bonuses. Top pay based on experience. KEY RESPONSIBILITIES AND SKILL REQUIREMENTS · Able to complete onsite millwork, cabinet and countertop, fixture, graphic and décor installs in commercial and retail environments. · Personnel management of various crew sizes ranging from 3-6 employees or larger projects of 8 or more employees. · Able to receive, stage and manage large inventory of millwork and fixture parts for distribution and installation. · Able to evaluate site conditions, construction and delivery schedules and when these factors are not aligned, clearly and effectively communicate to Project Management Team, onsite contractor or when necessary, our client. · Able to establish and understand layouts for millwork, fixtures and other elements. · Must always represent the company in a professional manner. Adopt and embrace our company Core Values. · Report time sheets, expense reports, daily reports and progress photos electronically. Generate additional work validations as required when non-contract scope is required. · Perform all tasks of a finish carpenter including installation of cabinets, countertops, standing and running trim (base, chair rail, crown moldings, door and window casings), scribing, coping, installing wall panel systems, retail fixtures etc. · Ability to manage and motivate others while maintaining professionalism. · Able to professionally interact with clients, general contractors and other sub-contractors. · Strong working knowledge of woodworking hand and power tools. · Strong working knowledge and understanding of architectural drawings, shop drawings and fixturing floorplans. · Must have a strong commitment to job site safety including always maintaining a clean jobsite. “OUR CORE VALUES DRIVE EVERY DECISION AND ARE INTERWOVEN INTO EVERYTHING WE DO” We lead the pack. We are fair, honest and respectful in every interaction. We got your back. We support and encourage doing what's right, even when it's not easy We have fun. We inspire, have passion, and create fun in all that we do. We get it done. We are driven to hold ourselves accountable in making “yes” happen. Salary Description $27.00 to $34.00 hourly based on experience

Baldwin & Shell Construction Company is looking for a Carpenter who will thrive in our company. The Carpenter is responsible for constructing wood-based products, layouts, installations, repairing, finishing, and maintaining various structures such as buildings and fixtures. They must comply with local building codes, and health and safety regulations. The Carpenter reports directly to the Assistant Superintendent or Superintendent. Responsibilities: Read blueprints, drawings, and sketches to fully grasp requirements. Construct and install building frameworks, including walls, floors, and doorframes. Inspect and replace damaged framework or other structures and fixtures. Take measurements and calculate the size and amount of material needed. Cut, shape and smooth lumber and other material (e.g. fiberglass) according to measurements. Build window frames, doors, staircases, and frame buildings by using raw materials or pre-constructed items. Lay out flooring, roofing or drywall ensuring they are level and compatible. Carve and assemble furniture, cabinets, shelves, and other items and install them where designated. Inspect places and conduct repairs or maintenance. Build scaffolding and other construction structures. Minimum Qualifications: At least three (3) years of carpentry, construction, and hardware experience. Must have experience installing doors and hardware on commercial construction projects. Good communication skills. Knowledge of basic mathematics. Ability to take accurate measurements using and reading tape measures. Ability to read and interpret blueprints. Ability to operate tools, machines, and other equipment safely. Must be able to pass a background check and pre-employment drug test. Pursuant to the Arkansas Medical Marijuana Act 593, this position is a designated safety-sensitive position according to Baldwin & Shell standards and processes. Preferred Qualifications: Experience in commercial construction. Please note that this job description is not designed to cover or contain a comprehensive listing of the employee's activities, duties, or responsibilities required for this job. Duties, responsibilities, and activities may change at any time, with or without notice. What we offer: Highly competitive compensation 401(k) retirement with matching funds Health, Dental, and Vision insurance 8 Paid holidays Vacation accrual Short-term disability Maternity and Paternity Leave Pet insurance Free & confidential Employee Assistance Program Excellent work environment Baldwin & Shell is proud to offer highly competitive compensation, benefits package, and a family work environment! If you think you would thrive in this position, please apply with us today! For more information or questions, please reach out to our Human Resources Team: Email: ********************* ATTN: HR Phone: ************ Baldwin & Shell is a drug-free workplace and an E-Verify participant. Baldwin & Shell is proud to be a part of an Equal Opportunity Employer to include women, minorities, veterans, persons with disabilities, color, sex, sexual orientation, gender identity, religion, origin, and genetic information. All are encouraged to apply!

Benefits: Competitive salary Flexible schedule Free uniforms WHAT WE OFFER? $25 - $30 per hour plus vehicle allowance Flexible hours and ability to create own schedule (no weekends or weekends only) W-2 status with the flexibility of an independent job Growth and advancement opportunities Respectful and supportive work environment This position is for for an experienced Drywall Finisher who is committed to quality work and customer service. Additional trade skills are a plus. RESPONSIBILITIES: Work independently to safely and professionally complete drywall repairs and new installation as well as complete some home repair, maintenance and improvement projects within schedule and budget Organize and manage equipment and materials required to complete projects Work with clients and teammates to provide exceptional customer service while maintaining focus on safety Accurately track job progress and collect payments utilizing field service software and tablets SKILLS AND REQUIREMENTS: An expert level knowledge of drywall finishing is required A good overall knowledge of carpentry, painting, plumbing and electrical is a plus Possessing the tools needed to complete drywall repairs, installation and finishing is required Possessing many of the tools needed to complete home repair, maintenance and installation projects and understand how to safely/properly utilize them is a plus Mechanical aptitude, problem-solving, and basic mathematical and English language skills A strong work ethic, excellent time management, highly dependable, and self-reliant Able to safely do physical labor work including bending, lifting (75+ lbs), climbing ladders and handling tools Work in attics and other limited-space areas Reliable transportation Current valid driver's license with good driving record and ability to operate fleet vehicle in a safe manner at all times Pass background screening House Doctors is a professional handyman home repair and home improvements company specializing in both small and large jobs in the Little Rock area. We are looking for energetic and friendly professional Craftsmen who enjoy working on various home improvement and maintenance projects such as repairs, flooring, drywall, carpentry, painting, etc. We treat our team with respect, pay competitive wages, offer incentives, and provide opportunities to grow with the company. If this sounds like the kind of position you've been looking for, we want to hear from you. Apply today! Drywall Finisher, Handyman, Craftsman, Carpenter, Tradesmen, Journeyman Plumber, Journeyman Electrician, Installation Technician, Smart Home Technician, Appliance Repair, Appliance Technician Compensation: $20.00 - $30.00 per hour House Doctors is the trusted handyman service for all of your home repair and home improvement needs. Our handyman technicians possess years of experience and are highly skilled in a wide range of trades. And when you hire House Doctors, you'll have peace of mind that our employees are fully insured and every job that we perform is backed with a one-year labor guarantee. Here's just some of the reasons why House Doctors is the trusted handyman professional in locations throughout the U.S. Prompt & Precise - We show up at a scheduled time that fits your schedule and promise to complete the job to your satisfaction. Experienced & Insured - Our technicians have years of experience and are fully bonded and insured. Guaranteed - Every job that we perform is backed by a one-year guarantee. Customer Service - We pride ourselves on providing excellent customer service to each and everyone of our customers. We treat your home like it's our own! Well Marked and Stocked Vans - Our logoed vehicles are well marked, and are stocked with a wide range of tools and materials. With House Doctors no job is too small! From minor home repairs to more complex home improvements, we can do it all!

Join our Growing Team and see why Summit Utilities, Inc was named as one of the Fastest Growing Denver Area Private Companies 2019 and 2020; Best Places to Work in Maine 2019, 2020, 2021, 2022 and 2023; and Best Places to Work in Arkansas 2020 and 2023, Oklahoma 2022 and 2023 and Missouri 2023. Summit was also recently named one of Forbes 2023 America's Best Small Employers. Summit is a growing natural gas utility company providing safe, reliable and clean burning natural gas service to homes and businesses in Arkansas, Colorado, Maine, Missouri and Oklahoma. Being part of the Summit team means embracing excellence and innovation, committing to safety each and every day, and doing all that we can to serve each other, our customers and the communities where we live. We aim to bring warmth and energy to everything we do. We have an exciting opportunity for a C&M Crew Leader based in Little Rock, Arkansas. POSITION SUMMARY Plans, directs, schedules, performs, and checks all work in connection with construction and maintenance of gas distribution system. Performs company field operations including manual labor and other duties necessary to accomplish the installation, repair, construction, and maintenance of natural gas distribution systems. PRIMARY DUTIES AND RESPONSIBILITIES Leads and directs all gas distribution work for a construction crew. Installs, repairs or replaces steel and plastic pipe. Trains, coaches and monitors crew members. Responsible for locating gas lines and ensuring that other utility lines are located prior to excavation. Responsible for the quality of all plastic and steel welding by crew members. Transports required equipment, tools, and supplies to work site. Provides First Responder assistance in emergency situations. Completes paperwork as required. Performs other duties as assigned. EDUCATION AND WORK EXPERIENCE Requires a high school diploma or the equivalent knowledge of English, mathematics (addition, subtraction, multiplication, division, fractions, and percentages), punctuation, grammar and spelling. Preferred candidate will have a minimum of five (5) years' experience in construction, installation, and maintenance of natural gas distribution systems, including two (2) years' experience welding (steel) pipe & two (2) years' experience of plastic fusion activities. Requires a commercial driver's license and company welding certification. KNOWLEDGE, SKILLS, ABILITIES Provide a valid state Class A commercial driver's license and present and maintain a good driving record and to operate company vehicles safely and in compliance with applicable laws and company policies. Apply knowledge of industry and company safety standards and regulations and hold others accountable for complying. Utilize and train others on the use of proper tools for any given job. Demonstrate and maintain company plastic fusion certification and company welding certifications. Perform gas meter resets and relights. Able to utilize company's mapping system effectively. Completes all paperwork as required. Able to motivate self, accomplish tasks and achieve goals with minimal supervision including self-directed learning. Demonstrates knowledge of industry and company safety standards and regulations. Demonstrates use the proper tools for any given job. Able to respond well to changing priorities. Solve problems with logical solutions. Demonstrates and utilizes effective oral and written communication skills. Listen effectively and clarify information as needed. Work independently or in a team-based environment to accomplish assignments and achieve objectives. Performs Plugging and Tapping procedures. Performs plastic fusion. Able to operate heavy equipment such as backhoe, trencher and a two-ton or larger truck. Demonstrates an aptitude for basic mechanical tasks. Demonstrates use of Personal Computer skills, SAP and Mobile Data completion. Demonstrates commitment to compliance with applicable laws and regulations. Adheres to the Company's Ethics and Compliance Code of Conduct, and other Company policies and procedures and do so consistently, take all training courses as required. Able to demonstrate respect for all individuals, adhere to the Company's values and business practices and do both consistently Provide training and development for all field related activities to crew members. The position is covered under the D.O.T. regulations and Summit Utilities Drug and Alcohol Policy and is, therefore, subject to all terms of the Policy, including the random selection for drug testing. Summit offers competitive pay and medical/dental/vision and other benefits that provide flexibility, choice and support to our employees when they need it most. We understand that home and family are essential pieces of your life, and our benefits are designed to support you both at work and at home. Summit Utilities, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or protected veteran status and will not be discriminated against on the basis of disability or veteran status.

Job Description Tree Care Crew Leader - Joshua Tree Experts Tired of Just a Job ? Want a Career With Purpose ? Joshua Tree Experts, the leader in outdoor home services, is seeking a Tree Care Crew Leader to join our safety-first, and fast growing team. We're focused on investing in YOU with paid education and top-tier equipment to get the job done. Elevate Your Landscaping Career with Joshua Tree Experts Your Role: Lead and perform all residential/commercial tree & shrub care. Safely operate lifts, loaders, and saws. Ensure client satisfaction and job site safety. Maintain equipment and adhere to safety standards. You Bring: 5+ years tree care experience (pruning, removals, climbing). Expertise in tree species, diseases, and care. Proficient with tree care equipment (chainsaws, chippers, stump grinders). Strong problem-solving & communication skills. Valid DL & clean driving record. We Offer: Safety-first culture. Career advancement & paid education/certifications. Great work/life balance & year-round employment. Paid vacation, holidays, PTO. Safety incentives & bonuses. Uniform servicing. Ready to be a Rockstar? Apply Today!

JOB SUMMARY The Wastewater Lift Stations Crew Leader supervises and performs work leading a crew of skilled and unskilled workers in activities related to sewer lift pump. . .

Our franchise organization, GRO Restaurant Group Inc. dba Golden Corral, is currently seeking energetic, friendly individuals to join our team! The Cook is responsible for the quality, quantity, tastiness, and freshness of all Hot Choice Buffet products. The Cook pays special attention to speed, cleanliness, organization, and product specifications.Food Production: Prepares Hot Choice Buffet products, including Carving and Display Cooking products, according to Golden Corral recipes and procedures. Grills all items according to Golden Corral standards to ensure quality. Ensures that every fried product is always fresh and hot. If the Buffet Attendant is unavailable, the Cook restocks the items at the Display Cooking Station. If the Carver is unavailable, assists guests with carved meat options. Complete use and following of the buffet production system to insure quality and shelf life compliance. Operational Excellence: Maintains the correct temperature of all products during cooking, holding and serving. Uses the Hot Choice Buffet Production Guide and the Display Cooking Hot Cook Production Guide to maintain an inventory of all hot cook products. Conducts opening and closing administrative procedures. Properly maintains equipment according to the Equipment Maintenance manual. Restocks and rotates food products by using the first-in, first-out method (FIFO). Takes inventory of products and checks build-to with the Manager at the beginning and end of each shift. Cleanliness: Ensures that that Hot Cook area and all smallwares are clean and checks dishes for cleanliness before using them. Performs duty roster and ensures cleanliness, service, and quality standards are met. . Follows local health department laws. Keeps Char Grill clean and scraped to ensure product quality and sanitation. Guest Service: Ensures that Hot Choice Buffet products, including Display Cooking products, are always hot and fresh for the guests. Knows and follows position responsibilities as they relate to just-in-time delivery. Is friendly and courteous to guests and assists them with the products. Maintains professional communication at all times. Thank you for your interest in Golden Corral. Upon completion of your online application, you may be directed to complete an additional online questionnaire that is specific to the position in which you are applying. The job opening listed on this page has been posted by an independent franchisee of Golden Corral Corporation. Golden Corral Corporation does not hire or employ any individuals at this franchise location. The franchisee will make all decisions with respect to applications for the position listed on this page. The name of the franchisee appears in this job posting. All questions concerning this job opportunity should be directed to the franchisee. Compensation: $14.00 - $16.00 per hour This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Golden Corral Corporate.

Are you looking to be part of something BIGGER? Groundworks Company offers competitive hourly pay + bonus paid per job, employee ownership, and a fast track to leadership positions. We're hiring Installers (Construction General Laborers) for our award-winning team in Little Rock! Why This Job Rocks: Growth Opportunities: Advance to Foreman in just one year, we promote from within over 80% of the time. Employee Ownership: Become an OWNER in 6 months - we invest in you! We Embrace Meritocracy - your hard work is rewarded. Award-Winning Culture: Join a Best Workplace - our core values are the foundation of our decisions and the essence of who we are. What We Provide: Pay: Competitive hourly pay + bonus paid per job ($40k-50k/yr average) Tools & Transportation: Provided & get a FREE pair of work boots each year! Year-Round Work: Full-time, nonseasonal, consistent work. Career Development: Clear career path, certifications & leadership training Benefits: Medical, Dental, Vision, Disability, Life insurance, 401(k) with match, 2 weeks PTO & 6 paid holidays! What We Expect: Contribute to our high-performance team, we WIN together! We work until it's done right. Period. Build open and honest relationships with communication. Embrace & drive growth. Get ready to grow your skills & your career. Deliver quality through great service. Be humble - We all put our boots on the same way. Protect, repair, and improve our customers' greatest asset - their home. What You Can Expect: Execute Construction General Labor duties Learn our business and grow your career Organize, carry and load heavy (up to 50lbs) job materials. Perform set-up and clean-up tasks on the job site. Dig and back-fill trenches/holes. Make repairs in crawl spaces (confined spaces), basements, and around home foundations. Perform work duties while exposed to the outdoor elements: extreme heat, extreme cold, rainy weather, etc. Valid driver's license preferred - required for promotion. Groundworks is the leading provider of Foundation Repair, Crawl Space Encapsulation, Basement Waterproofing, and Concrete Lifting & Stabilization. With locations across the USA and Canada, Groundworks is the leading foundation solutions and water management company in North America! Recognized as a Top Workplaces USA™ company and offering employee ownership for everyone, we're building something that just can't be replicated. And we're on a mission to change an industry like never before! We're unique here at Groundworks. We are all connected through the same vision, mission, and values, and we are stronger together. We're proud to be the Groundworks Tribe! Our highly trained teams have decades of experience delivering innovative solutions, unmatched quality, and industry-leading warranties, helping homeowners everywhere protect and repair their most valuable asset - their home. When customers choose a local Groundworks company, they can feel confident they're hiring the trusted local experts who will ensure the job's done right. When you choose Groundworks, you'll join thousands of Tribemates who are making history.

Job Description Contractor's Specialty Service Company is the Arkansas contractor of choice for temporary and permanent pavement marking and marking removal services. Our services include long line thermoplastic and paint striping, detail and parking lot striping, airport striping, decorative crosswalks, and pavement marking removal. Through a combination of highly trained staff and state-of-the art equipment, CSSC is able to exceed the expectations of our government, contractor, and private business customers. DUTIES AND RESPONSIBILITIES: · Manually load or unload equipment, materials, or supplies · Assist with layout of roadway markings. · Correctly load and secure all loads. · Drive assigned vehicle/equipment as directed to and from job site. Including daily pre-trip inspections of assigned truck and log keeping, as required. (eligible drivers only). · Perform roadway preparation, including grinding, sealing, tape removal, as directed. · Once Flagger certified, assist in traffic control as directed. · Assist in maintenance of assigned equipment. · Responsible for maintaining assigned PPE and having proper PPE on hand for scheduled work. · Participate in all required safety training including weekly Toolbox Talks. · Clean and organize warehouse, shop, yard, office, and vehicles to maintain a clean, safe work environment. · Responsible for reporting all incidents you are involved in or witness to the Safety Director as per company training and incident reporting protocols. · Other duties as assigned MINIMUM QUALIFICATIONS: · High school diploma or equivalent · Must successfully complete a pre-employment background check, motor vehicle report, and drug screen. Random drug screens are also performed post-employment. · Must possess a current Driver's License; Commercial Driver's License (CDL B) preferred · Must be able to work a flexible schedule with overtime, nights, and weekends as the job requires · Must be at least 21-years of age to meet driver's insurance eligibility requirements for company vehicles · The physical ability to immediately respond to emergency situations. · Must meet the eligibility requirements of the company Fleet Policy to be a company sanctioned driver. SKILLS AND KNOWLEDGE: · Must possess good interpersonal skills. · Good communications skills, both written and oral. · Ability to apply concepts of basic math. · Ability to manage time between two or more projects at one time. · Ability to read and comprehend instructions and procedures. · Possess minimum ability to read a tape measure. · The ability to apply knowledge and skills to achieve intended results. · Must successfully complete company provided First Aid, CPR, AED, and Flagger training/certification · If required, must successfully complete company provided Forklift training/certification - understand you are not permitted to operate company forklift until certification is received. · Must successfully complete company provided Traffic Control training/certification · If required, must successfully complete company provided Smith Driving training/certification (eligible drivers only) Job Type: Full-time Expected hours: No less than 40 per week Powered by JazzHR y6V52r2HeD

Job DescriptionDescription: We are a leader in Millwork, Cabinet and Fixture Installations seeking experienced and enthusiastic working Lead Finish Carpenters who can perform in a diverse range of situations overseeing and installing fixtures, casework and millwork in commercial and retail environments. “We have traveling positions available. If you are looking for stability, outstanding compensation and want to work for a Leader in our Industry, please contact us now.” Requirements: Education: High School Diploma or Equivalent Experience: Five (5) years fixture installation and retail or commercial finish carpentry experience. One (1) year minimum supervisory experience. Certification(s): OSHA10 or 30, Forklift, aerial lift (Company will provide if necessary). Technology: Able to download and use APPS on phone and mobile devices. Able to make electronic submissions though company portal. Physical Demands: Ability to walk and stand for long periods of time, climb ladders, work from an aerial lift. Frequent bending, kneeling, twisting and squatting. Work with materials over your head for short durations. Able to lift and carry objects weighing up to 50 lbs. regularly. CONDITIONS OF EMPLOYMENT Must be able to pass a Drug Screening, Criminal Background Check and MVR screening for approved driving status. Must be able to complete a Company Sponsored CPR/First Aid Training course online. Available to work overtime as needed. Our typical workweek is 40 to 60 hours. Be flexible to work non-conventional shifts when required (some overnight projects may occur). Able to travel and be away from home for durations from 2-8 weeks depending on our contract. Must provide own basic hand tools and cordless drill. COMPENSATION AND BENEFITS PACKAGE Company provides Health, Dental and Life Insurance, Long term Disability Plan, 401k, Reimbursement for travel expenses, Travel Perks, Referral Bonuses. Top pay based on experience. KEY RESPONSIBILITIES AND SKILL REQUIREMENTS · Able to complete onsite millwork, cabinet and countertop, fixture, graphic and décor installs in commercial and retail environments. · Personnel management of various crew sizes ranging from 3-6 employees or larger projects of 8 or more employees. · Able to receive, stage and manage large inventory of millwork and fixture parts for distribution and installation. · Able to evaluate site conditions, construction and delivery schedules and when these factors are not aligned, clearly and effectively communicate to Project Management Team, onsite contractor or when necessary, our client. · Able to establish and understand layouts for millwork, fixtures and other elements. · Must always represent the company in a professional manner. Adopt and embrace our company Core Values. · Report time sheets, expense reports, daily reports and progress photos electronically. Generate additional work validations as required when non-contract scope is required. · Perform all tasks of a finish carpenter including installation of cabinets, countertops, standing and running trim (base, chair rail, crown moldings, door and window casings), scribing, coping, installing wall panel systems, retail fixtures etc. · Ability to manage and motivate others while maintaining professionalism. · Able to professionally interact with clients, general contractors and other sub-contractors. · Strong working knowledge of woodworking hand and power tools. · Strong working knowledge and understanding of architectural drawings, shop drawings and fixturing floorplans. · Must have a strong commitment to job site safety including always maintaining a clean jobsite. “OUR CORE VALUES DRIVE EVERY DECISION AND ARE INTERWOVEN INTO EVERYTHING WE DO” We lead the pack. We are fair, honest and respectful in every interaction. We got your back. We support and encourage doing what's right, even when it's not easy We have fun. We inspire, have passion, and create fun in all that we do. We get it done. We are driven to hold ourselves accountable in making “yes” happen.