Construction materials testing technician jobs near me

Job DescriptionConstruction Materials Testing Technician Lead St. Louis, MO. We are seeking an experienced Construction Materials Technician (CMT) to serve as the lead technician on a high-profile, out-of-town construction project. This role requires full-time travel and on-site presence for the duration of the assignment. The ideal candidate has a strong background in construction materials testing, including drilled pier observation and rebar inspection, and is confident working independently as the primary technician on site. Key Responsibilities: Serve as the lead field technician, overseeing all on-site testing and reporting. Perform field and lab testing on soil, concrete, asphalt, aggregate, and grout. Conduct nuclear gauge compaction testing, moisture/density testing, and concrete sampling. Observe and document drilled pier installation and perform rebar inspections to verify compliance with project specifications. Monitor construction activities including earthwork, paving, and structural concrete work. Maintain detailed and accurate field logs, test reports, and documentation. Coordinate daily with project managers, site supervisors, and engineers. Enforce and follow all site safety standards and proper use of testing equipment. Represent the company professionally with clients and subcontractors. Requirements: 2+ years of Construction Materials Testing (CMT) experience in the field. Proven experience with drilled piers, rebar inspection, and soil/concrete/asphalt testing. Comfortable working independently on remote job sites for extended periods. Proficiency with nuclear density gauge and familiarity with common test methods (ASTM, AASHTO, etc.). Strong communication, time management, and documentation skills. Valid driver's license and clean driving record. Preferred certifications: ACI Concrete Field Testing Technician Grade I, NICET Level I/II, Nuclear Gauge Safety Training. Compensation & Benefits: Competitive hourly pay: Up to $23.50/hr

Job Description Fisher Industries is a vertically integrated family of businesses that provides heavy civil construction and aggregate products across the United States. With over 70 years of experience, the company specializes in highways, bridges, aggregates, and large-scale infrastructure projects, supported by in-house capabilities in drilling, blasting, crushing, asphalt, and concrete production. Fisher is committed to delivering innovative, cost-effective solutions with an emphasis on safety and quality. As a proven industry leader, Fisher Industries continues to grow while maintaining the integrity and values of a family-owned company. For additional information about our company, visit our website at ***************** POSITION SCOPE The Civil Engineering Construction Materials Testing Technician will sample, and test processed aggregates, asphalt, and/or concrete for quality related characteristics. Traveling to remote work sites within state lines is required. Travel to surrounding states is periodically required. $2500 Sign-On Bonus! * Bonuses Payable following 90 days of employment PRIMARY DUTIES Perform aggregate, asphalt, and/or concrete laboratory testing using approved methods Gather, test and log samples of material, ensuring quality in all phases of testing Perform field testing at project sites under construction Interact professionally and positively with client representatives, business partners, and co-workers Adherent to all safety and protective equipment policies, demonstrating safe work practices and completing required safety training Maintain accurate, detailed, legible records (written and electronic) of required testing results Obtain and maintain current certifications as required for position Must be able to safely operate nuclear gauge in accordance with company procedures Must be able to accept guidance and direction from senior personnel Must maintain required qualifications to operate company vehicles Safety, Safety, Safety comply with all OSHA/MSHA and company policies, procedures, and standards of safety Perform other duties as assigned REQUIREMENTS High school diploma or equivalent Geotechnical Experience ATTI Certifications desired 1 year of previous experience in aggregate, asphalt, and/or concrete related lab and field testing on road construction projects with demonstrated competence in work assignments is preferred Job related certifications are preferred Valid Driver's License is required Acceptable MVR in accordance with Fisher's Company Vehicle Program policy is required Must be a self-starter who is able to work effectively and efficiently with limited supervision Basic math skills Good communication and computer skills Ability to lift and move up to 65 lbs. repeatedly daily Ability to complete work tasks under various adverse weather conditions including heat above 100 degrees, cold, rain, and snow Ability to pass a pre-employment drug test Travel to work sites within state lines is required Travel to surrounding states is periodically required Fisher Industries is an Equal Opportunity Employer. We are a drug-free work environment requiring pre-employment and random drug testing. Subject to background check. If you require an accommodation with applying, please email ******************** or call the HR Department at ************** to request accommodations. This email is only to request accommodation for the application process and is not an email to inquire about the status of your application. Job Posted by ApplicantPro

NOTICE: The posting for local applicants only - is not for those applying for a global assignment and/or for employees working outside of Cipla's U.S. Subsidiaries or Affiliates. Job Title DPI QA Inspector II Organization Name InvaGen Pharmaceuticals, Inc. Location Unit 1 - 7 Oser Avenue, Hauppauge, NY 11788 Employment Type Full Time Shift First Shift: 8:30 AM - 5:00 PM (May vary based on business needs) Salary Range (Base/salary) $18.72/hr - $26/hr Benefits In addition to a fulfilling career and competitive salary, the Company offers a comprehensive benefits package to include a 401(k) savings plan and matching, health insurance - medical/dental/vision, health savings account (HSA), flexible spending account (FSA), paid time off (PTO) - vacation/sick/flex time, paid holidays, short-term disability (STD), long-term disability (LTD), parental leave, employee discounts, and other benefits. Responsibilities/ Accountabilities The QA Inspector is responsible for monitoring and ensuring product quality is maintained through all phases of manufacturing or packaging in compliance with established specifications. Verification of raw materials during the dispensing process. Dispensing printed packaging materials to packaging. Perform in-process checks during batch manufacturing and packaging, as per manufacturing & batch packaging record instructions. Collection of in-process blend, finished product, validation samples for analysis, sample collection as per protocols. Specifically, to perform blend uniformity (BU) sampling. To clean and maintain the samplings rods/dies/sample boxes used for BU sampling. Perform IPQA testing on the manufacturing floor specifically LOD, Bulk Density, Tapped Density, Leak Test, Weight Variation test. Ensure cleaning of manufacturing and packaging equipment, area and provide line clearance. To perform posting of dispensed materials and samples into SAP system (ERP system) and to perform other transactions in SAP. Involve in investigation of Deviation, OOS, OOT, or any other non-conformances. Ensure completion of individual training assigned and follow company policies, safety requirements, cGMP and SOP's. Review of online batch records, area/equipment logbooks, calibration/PMP records etc. Ensure the proper isolation of rejected material generated during batch process and accountability in the batch record. Review of engineering records (temperature and humidity data, calibration reports and PMP records). To take daily Quality rounds at shop floor to ensure shop floor is maintained in state of compliance and per GMP requirement. Report, escalate to Manager quality assurance about daily shop floor activities and any discrepancy during batch manufacturing and packing. Other duties [additional support] that management may assign from time to time. Education Qualifications/Experience Minimum Science Graduate A minimum of 1-2 years of pharmaceutical experience (DPI, MDI or Injectables) preferred. Preference will be given to candidates with experience in generic pharmaceutical manufacturing. Skills/ Competencies Knowledge of Good Manufacturing Practices and 21 CFR Part 820. Ability to read, write and communicate effectively. Basic computer skills (Microsoft Word, Power and Excel). Self-motivated, with the ability to work in fast-paced manufacturing environment and handle multiple tasks simultaneously. Excellent organization skills with strong attention to details skills. Strong fundamental mathematical skills and knowledge. Physical Requirements Work standing or walking unassisted for 75% or greater of an 8-hour period. Unassisted lifting up-to 35 lbs., may be required. Able to wear appropriate personal protective equipment at all times, when required. Other Information This role works in a cGMP laboratory or manufacturing environment, where personal protective equipment is required, which may include uniforms, lab coats, safety glasses, respiratory protective equipment, hearing protection, etc. Work with or around solvents, powders, or other materials commonly found in a pharmaceutical laboratory or manufacturing facility is required. Remote work and relocation are note supported in this position. About Cipla Cipla is a leading global pharmaceutical company, dedicated to high-quality, branded, and generic medicines. We are trusted by healthcare professionals and patients across geographies. Over the last eight decades, we have strengthened our leadership in India's pharmaceutical industry and fortified our promise of strengthening our global focus by consolidating and deepening our presence in the key markets of India, South Africa, the U.S., and other economies of the emerging world. Driven by the purpose ‘Caring for Life', Cipla's focus has always been on making affordable, world-class medicines with a reputation for uncompromising quality standards across the world. In the last 85 + years, Cipla has emerged as one of the most respected pharmaceutical names in India as well as across more than 100 countries. Cipla is a fast-growing pharmaceutical company with a continued focus on the expanse of our strong legacy. Over the last five years, Cipla has significantly expanded its portfolio and presence in the U.S. with both a generic and brand division. InvaGen Pharmaceuticals, Inc. InvaGen Pharmaceuticals is a Cipla subsidiary engaged in the development, manufacture, marketing, and distribution of generic prescription medicines with focus on a range of therapeutic areas, including cardiovascular, anti-infective, CNS, anti-inflammatory, anti-diabetic, and anti-depressants. The company was founded in 2003 and is based in Central Islip and Hauppauge, New York. In October 2020, InvaGen established its project site in Fall River, Massachusetts to support the launch of Cipla's respiratory business in the United States. Equal Opportunity Employer Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. At Cipla, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require reasonable accommodation to make your application or interview experience a great one, please contact the recruiter. About the Salary/ Pay Range: The salary range mentioned above is an anticipated base salary range for this position. Exact salary depends on several factors such as experience, skills, education, and budget. Salary range may vary based on geographic location. In addition to base salary, this position may be eligible for benefits and participation in a bonus program based on performance and company results.

Come work for OHM Advisors, the Community Advancement firm. With the singular mission of Advancing Communities , our diverse 750+ team of professionals works collaboratively across multiple service areas in multiple states, including architecture, engineering, planning, surveying, and construction engineering. We are a team of experts with individual specialties working together, driven to make a difference through people-focused problem solving, design, and ideas. In everything we do, we put people first. We create places for communities of people that help solve a problem and drive them forward- advancing the whole community today and well into the future. What You Will Contribute to OHM Advisors As a Construction Technician at OHM Advisors, you will contribute to the overall success of construction projects and help to ensure that they are delivered on time, within budget, and to the highest quality standards. You will also bring your technical expertise to contribute to the efficient and effective delivery of infrastructure solutions. Your Responsibilities Perform daily field inspections of construction work and prepare daily work reports. Interpret construction drawings and specifications on construction projects. Determine if encountered field conditions require a change to the construction contract. Implement RFIs on submittals and shop drawings into real-world construction projects. Able to perform or monitor a wide variety of materials testing, including concrete, asphalt, aggregates, and density testing. Track and record as-built information for incorporation into project record drawings. Communicate with the project team throughout the process. Ability to keep detailed notes, multitask, strong project organizational skills, and problem solve. Capable of working as a team member with multiple disciplines. Requirements Education, Experience, & Licensure: 0-10 years of experience in construction and/or construction inspection. Certified Professional in Erosion and Sediment Control (CPESC) is a plus. ACI Concrete testing certification preferred. ODOT inspection pre-qualifications preferred. Benefits Summary At OHM Advisors, our people are our greatest asset. We're committed to providing a supportive and rewarding workplace that fosters personal and professional growth. That's why we offer a competitive benefits package designed to meet your unique needs. Benefits: BCBSM Medical, Dental and Vision Company Profit Sharing Flexible Spending & Health Savings Accounts 401(k) retirement savings plan with employer matching contribution Paid professional association membership Tuition & Certification Expense reimbursement Volunteer Service Leave 100% Employer-Paid Life Insurance Short & Long-Term Disability Options Career Advancement & Enrichment Programs: Voluntary Wellness Program OHM Grad School OHM University You can read more about each of these programs on our website. OHM Advisors is an Equal Opportunity Employer (EOE). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. #LI-CC1

The City of Chandler Development Services Department is currently seeking qualified individuals interested in joining our team as a Civil Construction Senior Inspector. The position is scheduled to work Monday - Friday, 8:00 AM - 5:00 PM. Occasional weekend work may be required. Must be able to work overtime as needed. Current City of Chandler employees may only hold one position and are not eligible for additional part-time or secondary positions within the City of Chandler. Why work for Chandler? * Open and collaborative environment * Up to 8 hours paid time off annually to volunteer in the community * Dress code is business casual, with jeans on Fridays * 3 medical plans to choose from along with dental and vision coverage * Accrue 130 hours paid vacation in your first year, eligible for use immediately following accrual * Accrue 96 hours paid sick leave in your first year, eligible for use immediately following accrual * 12 paid holidays annually, plus Winter Break at the end of the year * Become part of the Arizona State Retirement System with a 100% city contribution match * City contributions of 1% gross wages per pay period to deferred compensation * Robust Employee Wellness program with $350 incentive * Professional development opportunities * Tuition reimbursement up to $5,250 annually, $3,200 for part time employees * Free Tumbleweed Recreation Center membership * Flexible schedule/remote work options (when available) Who we are The City of Chandler Development Services team, consisting of 86 positions, provides sound land use planning strategies, responsible design development standards, and high quality, safety compliant infrastructure in all areas of Development Services, including planning, GIS, building safety, development engineering, telecommunications and utility franchise, City fiber, transportation engineering, and customer service and permits. We are a progressive and innovative team that partners with the development community, contractors, other departments, and citizens to deliver quality services in support of the City of Chandler's Mission and Values. Who we are looking for Our new team member will have a passion for customer service, teamwork, and collaboration. We are looking for someone to inspect public works construction projects and public and private infrastructure projects to ensure compliance with City, state and MAG codes, laws and standards and contract/plan specifications as well as reviews as-built drawings to confirm conformance with completed construction. To view the complete job description, please click here. Minimum qualifications * A High School Diploma or GED; and * 4 years of experience in public works construction inspection work or related field; and * A valid Driver's License with acceptable driving record; or * Any equivalent combination of experience and training which provides the knowledge and abilities necessary to perform the work. Desired qualifications * Possession of inspection-related or any professional certifications (e.g., American Public Works Association - Certified Public Infrastructure Inspector (APWA-CPII), National Institute for Certification in Engineering Technologies (NICET) , Arizona Technical Testing Institute (ATTI) , American Concrete Institute (ACI)). This is a regular full-time position, subject to a 6-month probationary period. A register of qualified candidates will be active for 4 months should another position become available. The City of Chandler will conduct a driving record check as a condition of employment. An offer of employment is contingent upon acceptable results. All applicants hired will be required to be fingerprinted with successful results as a condition of continued employment. Applicants for employment and volunteer opportunities should be aware of the City of Chandler's policies concerning the use of drugs and alcohol. These policies have not been altered by the passage of Proposition 207. The use of recreational marijuana is a violation of the city's Drug Free Workplace Policy. Certain positions within the city are required to submit to a pre-employment drug test. A positive result for drugs tested under the policy, including recreational marijuana, may be grounds for withdrawal of an offer of employment or volunteer opportunity. The examination process may vary if determined necessary. The City of Chandler is committed to Equal Opportunity and Reasonable Accommodation.

As an essential business, Anomatic produces innovative and sustainable packaging for today's biggest brands. By leveraging over five decades of manufacturing expertise and employing an extensive technologies portfolio, we design, manufacture, and finish incomparable stock and customized solutions for numerous markets. Position: Quality Control Inspector Location: New Albany, Ohio Department: Assembly Reports to: Quality Manager Shift: Third Shift: Sunday - Thursday, 10:00pm - 6:00am _____________________________________________________ JOB SUMMARY The Quality Control Inspector is responsible for ensuring quality product is received and/or produced on the production floor. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Sample products and components according to test plan. Inspect for defects; gauges for necessary dimensions and records as required. Process test parts through anodizing, assembly, deco, or metallizing and inspect for defects. Report any defects as appropriate (visual, functional and dimensional) and fills out final inspection report. Enter data into SyteLine ERP system. Perform quality control tests as required. Provide timely and complete communication with all appropriate departments and functions concerning the acceptability of raw products and components. Lead activities to ensure priorities are established and goals are achieved. Perform all other duties as needed. QUALIFICATIONS Basic mathematical skills, including addition, subtraction, multiplication and division. Understanding of quality control concepts and processes within a manufacturing environment. Self-motivated and able to work independently with minimal direction Able to work overtime as needed - sometimes on a short notice or on weekends Inspection background preferred. Minimum of two (2) years of quality control experience in a manufacturing environment preferred. Benefits you can expect from Anomatic: Competitive Pay Career Growth Health Coverage Starting Your First Day 401K with Company Match, to help save for the future Paid Time Off to Enjoy Family or Hobbies DailyPay, to get your money faster Training, to help hone skills Many more! Anomatic takes pride in creating a safe and inclusive environment that encourages, supports, and celebrates the diverse voices of our employees and the communities in which they live. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status.

CMS At ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. ZOLL Cardiac Management Solutions offers a unique portfolio of novel technologies designed to deliver better insights and better outcomes. On any given day, clinicians utilize these ZOLL products for tens of thousands of cardiac patients around the world: * LifeVest, the world's first wearable defibrillator, has been trusted to protect more than 1M patients at risk of sudden cardiac death. * HFMS (Heart Failure Management system) is a non-invasive, patch-based device that monitors pulmonary fluid levels and has been shown to reduce heart failure readmissions rates by 38 percent. * TherOx Super Saturated Oxygen (SSO2) Therapy is the first FDA-approved therapy since the stent 20+ years ago to reduce infarct size in patients with the most severe heart attacks. Heart disease is the leading cause of death for both men and women in the U.S. At ZOLL, your work will help to ensure cardiac patients get the life-saving therapy they need. ZOLL has been Pittsburgh's Manufacturer of the Year, one of Western PA's Healthiest Employers, and even one of Pittsburgh's Coolest Offices. But it's our unique opportunity to impact people's lives that makes ZOLL the ideal place to build your career. Job Type On Site Job Summary Responsible for inspecting highly complex mechanical and electrical parts and providing technical responses and investigations. Essential Functions * Responsible for the generation of inspection reports. * Will read parts lists, manufacturing drawings, inspection instructions, wiring diagrams or schematics and engineering change notices. * Position involves basic measurement equipment (calipers, micrometers, pin gages, etc). * Must adhere to quality policies and procedures. * Perform other duties as assigned by Management * Responsible for the inspection of simple electrical and mechanical parts and assemblies * Responsible for performing simple MRP transactions as related to QA Required/Preferred Education and Experience * High School Diploma or equivalent required * A technical Associate's degree or equivalent experience preferred * Up to one year of related Quality Assurance experience required * Must be able to obtain a valid IPC-STD-001 or PC-A-610 certification upon hiring. Knowledge, Skills and Abilities * General working knowledge of using a computer PC (knowledge of Microsoft Office applications highly desirable). Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * Standing - Constantly * Walking - Constantly * Sitting - Occasionally * Lifting - Constantly * Carrying - Constantly * Pushing - Constantly * Pulling - Constantly * Talking - Occasionally * Hearing - Frequently * Repetitive Motions - Constantly * Eye/Hand/Foot Coordination - Constantly Working Conditions * Extreme cold - Occasionally * Extreme heat - Occasionally * Humidity - Occasionally * Wet - Occasionally * Noise - Frequently ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients' lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. #LI-KH1 The hourly pay rate for this position is: $18.00 to $22.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran. ADA: The employer will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990.

The QA associate assures the implementation of quality control and performs the nondestructive examination of cryogenic components, vacuum jacketed piping and overall product quality as defined from blueprints and internal quality criteria specifications. The inspector plays a key position in the overall quality management system where process standardization and the reduction in performance variation are integral to the client's continuous improvement. Responsibilities: • Inspections of weld fit-ups, weld joints, and completed weldments. • Perform various NDT methods including visual, dye penetrant, hydrostatic, pneumatic, and helium mass spectrometer leak testing. • Complete required test records and assist with the document control as required. • Assist with the maintenance of measurement devices in the calibration program. • Handle multiple tasks and accept verbal direction with efficiency. • Maintain testing equipment and the work area. Skills and Abilities: • Ability to read blueprints/drawings. • Knowledge of proper usage methods for measurement equipment, i.e.: gages, calipers, micrometers and other standard devices. • Good mechanical background. • Basic technical problem-solving skills. • Good organizational skills and ability to handle administrative tasks. • Ability to interact with engineers and management. Qualifications: • Minimum HS diploma or GED required. • Ability to lift, carry, push, pull or otherwise move objects weighing up to 40 pounds. • Must demonstrate the ability to read the equivalent of the size and letters of the Jaeger II chart at a minimum distance of 12 inches and distinguish and differentiate the contrasts between colors illustrated on an Ishihara Test Chart. • U.S. CITIZENSHIP REQUIRED.

Job Description ***********PLEASE READ BELOW***************** The Immediate Pay, Quality Inspector position offers individuals the opportunity to receive payment for their work on the same day they perform their duties. This position is designed to provide a quick and fair compensation system for workers who are seeking immediate income. Upon starting the job, workers will be paid for their first day of work (ONLY) at the end of that day. However, it is important to note that if a worker does not show up for their second day of work without prior notice or valid reason, they will be terminated from the position. This is a W2 position. You will not be considered if you do not perform video screen. Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations Check/inspect manufactured parts or products for defects Read and follow work instructions and general processes Use measuring or testing equipment as needed Ensure products meet quality standards Display excellent customer service Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management Collect and record data Technical Utilize company portal for time recording and policy acknowledgements Other Any other duties as assigned Knowledge, skills, abilities Hard skills Requirements Must be able to speak and read in the English language Good communications skills Must be able to multi-task Ability to work in a fast-paced environment Ability to handle sensitive and confidential material Ability lift /move 50 pounds Must have reliable transportation

As a Data Center Quality Inspector I, you provide superb quality control services for our clients. The work includes performing essential inspections of electrical equipment and systems, such as switchgear and substations. Detailed knowledge of mechanical and instrumentation is critical to conduct inspections and interpret electrical drawings and specifications. Attentively, you ensure the equipment and technicians around you comply with company and site safety requirements. You prepare detailed daily reports about your findings, including time tracking and special inspection reports. Diligently, you approve and submit important documents such as Lockout/Tagout (LOTO) requests, team reports, and time tracking reports. You take pride in assuring that our clients receive safely installed and functional equipment every time. If you are an analytical and detail-oriented individual who communicates effectively and prioritizes safety, this could be the position for you! Travel may be required. Responsibilities Ability to read and interpret electrical drawings and specifications. Prepare written documentation such as daily narratives (work reports), special inspection reports, and daily time tracking. Perform inspections of switchgear, standby generators, protective relays, and other electrical distribution components. Submit LOTO requests, review and approve team reports, and time tracking. Ensure compliance with all company and site safety requirements. Benefits Competitive pay, depending on experience. Medical, dental, vision, 401(k) with company match, among other benefits. Holidays and paid vacation time. Extensive learning and development opportunities. Requirements Requirements High school diploma or equivalent. Higher education degree preferred. Minimum of two years of experience inspecting, testing, commissioning, or operating electrical distribution systems. Commercial or naval nuclear experience is strongly desired. OSHA 10-hour Construction Safety training. Commitment to excellence and high standards.

Job SummaryInspect raw material and/or parts, audit production practices and processes, and report on non-conformances.Job Description Key Accountabilities: Accurately inspect raw materials and products visually, as well as with gauges, scales, or other measurement instruments as required and according to work instructions. Segregate non-conforming parts or material. Complete required documentation for work performed. Perform data entry of work results into appropriate databases. Perform final inspection to reconcile outgoing shipments, as required. May be required to identify causes of non-conformance. This is a position that works directly on the warehouse floor on or around heavy machinery. Meet TKMNA Employee Attributes / Competencies. The above is intended to describe the general content of and requirement for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or requirements. This position has been identified as “safety sensitive” by thyssenkrupp under applicable laws. Accordingly, any application for this position that is considered for employment with thyssenkrupp requires successful completion of pre-employment drug testing, which may include testing for marijuana in accordance with any applicable federal, state, and local laws. Qualifications: Minimum Requirements: High school diploma or equivalent Ability to read and write English and perform basic math problems Ability to learn correct use of basic measurement instruments (tape measure, scales, gauges) Basic computer knowledge to complete data entry Attention to detail and accuracy Ability to accurately inspect basic material, commodities, and/or processes Safety Mindset. Preferred requirements: Some college courses or certificates in Quality Assurance-related field of study Prior experience using basic measurement instruments Prior experience in a quality assurance inspection position Benefits Overview We offer competitive company benefits to eligible positions, such as : Medical, Dental, Vision Insurance Life Insurance and Disability Voluntary Wellness Programs 401(k) and RRSP programs with Company Match Paid Vacation and Holidays Tuition Reimbursement And more! Benefits may vary based on job, country, union role, and/or company segment. Please work with your recruiter or tk representative for applicable benefits information. Disclaimer This is to notify the general public that some individuals/entities are using the thyssenkrupp (“TK”) name, trademark, domain name, and logo without authorization. They are posing as employees, representatives, or agents of TK and its associated/group companies. These individuals/entities are fraudulently offering jobs online through texts, websites, telephone calls, emails, or by issuing fake offer letters. They are also soliciting jobseekers to deposit money in certain bank accounts or providing jobseekers with fraudulent checks to obtain banking information. TK does not ask, solicit, or accept any monies in any form from candidates, job applicants, or potential jobseekers, who have applied to or wish to apply to TK, whether online or otherwise as a pre-employment requirement. TK bears no responsibility for money being deposited/withdrawn therefrom in response to such fake offers. TK does not: 1. Send job offers from free email services like Gmail, Rediffmail, Yahoo mail, etc.; 2. Request payment of any kind from prospective jobseekers or candidates for employment; 3. Authorize anyone to collect money or agree to any monetary arrangement in return for a job at TK; 4. Send checks to job seekers; or 5. Make job offers through third parties. In the event TK uses professional recruitment services through a third party, offers are always made directly by TK and not by any third parties. PLEASE NOTE: 1. TK strongly recommends that potential jobseekers do not respond to such fake solicitations, in any manner; 2. TK will not be responsible to anyone acting on an employment offer that is not directly made by TK; 3. Anyone making an employment offer in return for money is not authorized by TK; and 4. TK reserves the right to take legal action, including criminal action, against such individuals/entities. TK follows a formal recruitment process through its own HR department and applications are evaluated by its HR department through pre-defined processes. Please visit our official careers website at ******************************** to view authentic job openings at TK. If you receive any unauthorized, suspicious, or fraudulent offers or interview calls, please email us at **********************************************. We shall not accept any liability towards the representation made in any fraudulent communication or its consequences, and such fraudulent communication shall not be treated as any kind of offer or representation by TK or its group companies and affiliates.

CMS At ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. ZOLL Cardiac Management Solutions offers a unique portfolio of novel technologies designed to deliver better insights and better outcomes. On any given day, clinicians utilize these ZOLL products for tens of thousands of cardiac patients around the world: LifeVest, the world's first wearable defibrillator, has been trusted to protect more than 1M patients at risk of sudden cardiac death. HFMS (Heart Failure Management system) is a non-invasive, patch-based device that monitors pulmonary fluid levels and has been shown to reduce heart failure readmissions rates by 38 percent. TherOx Super Saturated Oxygen (SSO2) Therapy is the first FDA-approved therapy since the stent 20+ years ago to reduce infarct size in patients with the most severe heart attacks. Heart disease is the leading cause of death for both men and women in the U.S. At ZOLL, your work will help to ensure cardiac patients get the life-saving therapy they need. ZOLL has been Pittsburgh's Manufacturer of the Year, one of Western PA's Healthiest Employers, and even one of Pittsburgh's Coolest Offices. But it's our unique opportunity to impact people's lives that makes ZOLL the ideal place to build your career. Job Type On Site Job Summary Responsible for inspecting highly complex mechanical and electrical parts and providing technical responses and investigations. Essential Functions Responsible for the generation of inspection reports. Will read parts lists, manufacturing drawings, inspection instructions, wiring diagrams or schematics and engineering change notices. Position involves basic measurement equipment (calipers, micrometers, pin gages, etc). Must adhere to quality policies and procedures. Perform other duties as assigned by Management Responsible for the inspection of simple electrical and mechanical parts and assemblies Responsible for performing simple MRP transactions as related to QA Required/Preferred Education and Experience High School Diploma or equivalent required A technical Associate's degree or equivalent experience preferred Up to one year of related Quality Assurance experience required Must be able to obtain a valid IPC-STD-001 or PC-A-610 certification upon hiring. Knowledge, Skills and Abilities General working knowledge of using a computer PC (knowledge of Microsoft Office applications highly desirable). Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Standing - Constantly Walking - Constantly Sitting - Occasionally Lifting - Constantly Carrying - Constantly Pushing - Constantly Pulling - Constantly Talking - Occasionally Hearing - Frequently Repetitive Motions - Constantly Eye/Hand/Foot Coordination - Constantly Working Conditions Extreme cold - Occasionally Extreme heat - Occasionally Humidity - Occasionally Wet - Occasionally Noise - Frequently ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients' lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. #LI-KH1 The hourly pay rate for this position is: $17.00 to $20.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran. ADA: The employer will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990.

The Quality Control Inspector checks products in the warehouse to make sure they meet quality standards. This includes inspecting items for damage, verifying labels, and reporting any issues to supervisors. Key Duties: Inspect incoming and outgoing products for defects or damage Ensure items are labeled and packaged correctly Record inspection results and report any issues Follow warehouse safety and quality procedures Work closely with warehouse staff to maintain quality standards

Worthington Enterprises is excited to be hiring an Inspector. The Inspector is responsible for performing regulatory and internal customer specific testing of the cylinders. In this position, one needs to be able to read and analyze testing results and complete all necessary paperwork. A successful candidate would be someone who is a self-motivated problem solver with a strong work ethic. What We Offer: Competitive Pay: w/Shift Differential = $1.50/hr. for 2 nd and 3 rd shifts Overtime Pay: Time-and-a-half for hours over 40/week and double-time for hours over 48/week. Profit Sharing: Quarterly profit-sharing with no cap. Comprehensive Benefits: Health, dental, and vision insurance starting day one, with HSA contributions included. Perks: On-site gym, medical center, pharmacy, and barbershop. Career Growth: Opportunities for training, career development, and tuition assistance. Paid Parental Leave: Available for all regular full-time employees. Responsibilities Performs internal testing, internal checks, and cosmetic inspections. Performs burst, volumetric and proof tests on all types and sizes of cylinders. Performs titrations and calibrations. Completes all lab work and paperwork on all types and sizes of cylinders. Must learn to operate real time x-ray booth (where applicable). Must be able to obtain samples using the band saw or plasma torch and prep bend test, macro sample and tensile specimens using the belt sander. Other duties as assigned. Desired Experience Knowledge of physical steel properties, quality control and cylinder processes Strong mathematical and computer skills Must be able to comprehend and retain internal and regulatory requirements Must be able to handle physical, repetitive work and be able to stand on your feet for 8 hours a day Must be able to distinguish between part numbers and sizes Must understand and follow the quality policy and procedures X-ray interpretation skills (where applicable) Must be able to use micrometers and calipers Minimum 6-12 months of previous material handling experience or equivalent knowledge Basic reading, writing, and arithmetic OSHA safety training and HazMat training Provided Basic English proficiency is required to read safety instructions, understand work orders, and communicate with supervisors and coworkers. Ability to follow verbal and written instructions in English. Our Company is proud to have a dynamic and inclusive workforce where employees are empowered to innovate, thrive and grow. We believe that each employee's unique strengths contribute to the success of our organization. This belief extends to how we consider our job applicants. Your talents may align with this position or other opportunities within our organization. Apply today to start unlocking your career potential with Worthington Enterprises. Worthington Enterprises (NYSE: WOR) is a designer and manufacturer of market-leading brands that help enable people to live safer, healthier and more expressive lives. Worthington Enterprises operates with two primary business segments: Building Products and Consumer Products. Worthington's emphasis on innovation and transformation extends to building products including water systems, heating and cooling solutions, architectural and acoustical grid ceilings and metal framing and accessories, and consumer products in tools, outdoor living and celebrations categories sold under brand names Coleman , Bernzomatic , Balloon Time , Level5 Tools , Mag Torch , Well-X-Trol , General , Garden-Weasel , Pactool International , HALO and Hawkeye™. Worthington Enterprises also serves the growing global hydrogen ecosystem through on-board fueling systems and gas containment solutions. Founded in 1955 as Worthington Industries, Worthington Enterprises follows a people-first Philosophy with earning money for its shareholders as its first corporate goal. With its Headquarters in Columbus, Ohio, Worthington Enterprises employs approximately 5,000 people throughout North America and Europe.

Location: East Liberty, OH Employment Type: 2nd Shift, Full-time, temp-to-hire Job Brief Kable Workforce Solutions is hiring a Quality Inspector for our client. This job involves inspecting parts using measuring and test equipment, sorting and documenting results, and completing production-related and administrative tasks. You'll follow written and verbal instructions, report issues to supervisors, maintain a clean work area, and provide accurate paperwork while meeting productivity and safety standards.What's a Typical Day Like? Use inspection, measuring and test equipment Perform a full range of varied sorting, inspection, production, and data entry Perform a full range of production-related tasks as well as administrative duties related to quality project work Read and follow written and verbal work instructions - all employee policies, work rules, and directions Identify problems and questions and report them to the appropriate supervisor Maintain organization and cleanliness work area Ability to use inspection and test equipment as required Provide accurate and complete information for paperwork Meet productivity standards after successfully completing training Comply with all safety, hazardous material and OSHA training, rules, and reporting, ensuring safe work environment. What Are the Requirements of the Job? 18 years old Previous experience in a distribution center environment helpful Ability to frequently lift cartons above (up to 8 feet overhead) or below shoulder level Ability to move or lift up to 50+ lbs. Walk, stand, and/or sit for an entire shift Ability to utilize hand/eye coordination and manual dexterity Maintain flexibility regarding job assignments including working scheduled hours, location changes (QA Inspectors go to the parts they are inspecting), or mandatory overtime Pass a background check and drug test Wear steel toes Capability to stand for prolonged periods of time Communication skills. Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel. Why Choose Kable Workforce Solutions? Weekly Pay Exclusive Access Opportunities to V.I.P. Vault Day 1 Benefits Various Bonus Opportunities Eligibility for Employee of the Month Rewards How to Apply And Next Steps? Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.

Rittal is a leading global provider of solutions for industrial enclosures, power distribution, climate control, and IT infrastructure, as well as software and services. The company is a member of the Friedhelm Loh Group, a successful international player with 18 production plants, 80 subsidiaries, and 12,000 employees. Rittal LLC has built a strong tradition of innovation and takes pride in a progressive approach to engineering. We design and manufacture the world's leading industrial and IT enclosures, racks, and accessories, including high-efficiency, high-density power management, and climate control systems for industrial, data center, outdoor, and hybrid applications. Primary Activities/Duties Visually inspect parts for compliance with quality requirements. Verify documentation and paperwork for accuracy. Read blueprints to determine specifications and tolerances for machined components and assemblies. Use inspection tools to complete dimensional reports. Initiate containment activities when discrepancies are identified. Review and refine data collection requirements based on customer drawings, models, work orders, purchase orders, sketches, and PPAP standards. Participate in Gage R&R studies. Act as an impartial third party between production and customer to ensure product quality. Perform a variety of inspection tasks with minimal supervision. Communicate inspection findings and non-conformances to relevant stakeholders. Read and follow work instructions and general processes. Use measuring and testing equipment as needed. Ensure products meet quality standards and comply with health and safety policies. Collect and record inspection data. Utilize company portal for time tracking and policy acknowledgements. Perform other duties as assigned. Safety Requirements Wear safety-toed footwear. Safety glasses with side shields. Hearing protection. Additional personal protective equipment as required. Follow all safety procedures including Lock Out Tag Out when applicable. Physical Requirements Stand, walk, bend, twist, and reach frequently throughout the shift. Lift 25-50 pounds to waist level and up to 25 pounds above shoulder level. Stand for extended periods and occasionally work at a computer. Work Environment Manufacturing and warehouse areas with exposure to moving mechanical parts, dust, and high noise levels. May be required to work outdoors in various weather conditions. Regular use of cleaning solvents, oils, lubricants, and other substances. Knowledge & Experience High school diploma or GED required. One year of related experience or training preferred; equivalent combinations of education and experience considered. Ability to read engineering drawings and blueprints. Knowledge of GD&T and experience with measurement tools such as calipers, micrometers, and indicators. Strong communication skills and attention to detail. Ability to multi-task and work in a fast-paced environment. Familiarity with Microsoft Office and SAP is a plus. Basic understanding of ISO 9001:2015 standards. If you require reasonable accommodation for any part of the application or hiring process due to a disability, you may contact the company's Human Resources Department at **************. This option is reserved for individuals who require accommodation due to a disability. Rittal LLC and Eplan are proud to be an affirmative action/equal opportunity employer. EEO, including Disability/Vets.

Job Details Bremen, OH $24.00 - $29.00 HourlyDescription Westerman, Inc., an employee-owned company, is a multiple site manufacturer of production and storage equipment within the oil, gas, and nuclear industries. Our equipment helps optimize well pad design, improve separation efficiency and lower overall equipment spend through high-performance surface separation and processing technology. Our equipment is setting new standards for performance and economics nationwide. SUMMARY The Quality Inspector is responsible for inspecting parts of Pressure Vessels and process piping for stress and failure using multiple methods per regulatory, customer, and internal requirements. Candidates for this role should have a working knowledge of all inspection roles/ processes such as visual inspection, hydrostatic and various NDE methods. The Quality Inspector will be responsible for helping to detect the root cause of Quality issues as well as keeping track of Quality documentation through Westerman's document control software. The Quality Inspector must have applicable knowledge of all ASME codes that pertain to pressure vessels. The Quality Inspector will be required to have the ability to train, coordinate, and communicate effectively and professionally with all departments and personnel. SALARY $24 - $29 per hour - Depends on experience. BENEFITS 401(k) matching Health insurance Health Savings Account Vision insurance Dental insurance Life insurance Short Term/Long Term Disability Paid time off Parental leave Referral program Employee Assistance Program Employee-Owned Company Qualifications QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty or responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. RESPONSIBILITIES Regular and punctual attendance at work is an essential job function of each position and is necessary to your individual effectiveness and that of your work group. Regular and punctual attendance is required of all employees. Performs internal testing, internal checks, and cosmetic inspections. Performs inspections on material and product throughout production process Performs relevant non-destructive examinations using varying methods Completes all documentation required for tracking and record keeping Completes data entry and evaluates results of data entered Performs root cause analysis on non-conformities found Other duties as required and assigned. REQUIREMENTS 2 years' experience as Code Welder, Quality Inspector or equivalent knowledge required. Previous Quality Inspector experience strongly preferred. Associate's or Bachelor's degree in a related field preferred ASME Section VIII and B31.3 code knowledge required Candidate should have at least LVL 1 training in VT/PT/UT/MT and RT Film Interpretation Must be meticulous about capturing and retaining information Must have basic computer skills (Word, Excel, Record-keeping software, etc.) Must be able to work in a team environment and be able to explain issues in a professional manner Must be analytical and detail oriented Must have working knowledge of mathematical and measurement principles Must have a positive attitude and a desire to continually improve OSHA safety training and HazMat training preferred An understanding of Lean principles and practices is strongly preferred. PHYSICAL DEMANDS/ WORK ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to stand for extended periods of time, up to entire length of shift (10 - 12 hours). Must be able to handle physical repetitive work. Must be able to exert moderate to heavy physical effort with lifting requirement up to 50 pounds. Must have strong range of motion. Must be able to sit, stand, reach, stoop, kneel, crouch, climb, and bend repetitively. Must be able to see, speak, read, and hear. Must be able to read instructions and all measuring devices. Must use fingers and hands to manipulate tools and small parts. Must be able to walk over both even and uneven surfaces. Must be able to work in extreme temperatures, both hot and cold. Must be able to wear appropriate PPE. Must be physically able to access all areas of the plant and grounds. Some aspects of this position may require working in tight quarters (inside vessels). Some aspects of this position may require close vision, depth perception, the ability to see small detail, and the ability to adjust focus.

TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Bellefontaine, OH. 1st shift only. Sit Down job. Payrate is $14.00. Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development * Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations * Check/inspect manufactured parts or products for defects * Read and follow work instructions and general processes * Use measuring or testing equipment as needed * Ensure products meet quality standards * Display excellent customer service * Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management * Collect and record data Technical * Utilize company portal for time recording and policy acknowledgements Other * Any other duties as assigned Knowledge, skills, abilities Hard skills * Must be able to speak and read in the English language * Good communications skills * Must be able to multi-task * Ability to work in a fast-paced environment * Ability to handle sensitive and confidential material * Ability to walk and stand for long periods of time * Ability to bend, lift, twist and move freely * Ability to periodically lift/move up to 50 pounds * Must have reliable transportation Values & attitudes Global team spirit * Team player * Caring for people * Open-minded Excellence * Reactive * Resilient to pressure * Rigorous Customer focus * Client oriented * Reliable & trustworthy * Flexible Initiative * Autonomous * Innovative * Daring Work experience Overall recommendations * No experience necessary * Ability to read blueprints a plus Education background Overall recommendations * High School Diploma or Equivalent recommended or comparable work experience About TRIGO Global Quality Solutions Founded in 1997, TRIGO is a multinational company providing operational Quality Management solutions for the manufacturing sector, especially in the automotive and aerospace industries. With a team of more than ten thousand professionals present in 20+ countries across 4 continents, TRIGO offers a comprehensive portfolio of Quality Assurance services ranging from inspection to expert auditing, consulting and training. The unrivaled expertise, industrial mindset and extensive global footprint that TRIGO has built up over the last 3 decades has made TRIGO the leading quality solutions provider using the latest innovative and reliable digital systems and standard processes, delivering results in the most demanding industries. TRIGO has recently started to expand its clientele by offering quality services to the medical, chemical and food industries. TRIGO Global Quality Solutions is committed to the core values of equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability.

TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Bellefontaine, OH. 1st shift only. Sit Down job. Payrate is $14.00. Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations Check/inspect manufactured parts or products for defects Read and follow work instructions and general processes Use measuring or testing equipment as needed Ensure products meet quality standards Display excellent customer service Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management Collect and record data Technical Utilize company portal for time recording and policy acknowledgements Other Any other duties as assigned Knowledge, skills, abilities Hard skills Must be able to speak and read in the English language Good communications skills Must be able to multi-task Ability to work in a fast-paced environment Ability to handle sensitive and confidential material Ability to walk and stand for long periods of time Ability to bend, lift, twist and move freely Ability to periodically lift/move up to 50 pounds Must have reliable transportation Values & attitudes Global team spirit Team player Caring for people Open-minded Excellence Reactive Resilient to pressure Rigorous Customer focus Client oriented Reliable & trustworthy Flexible Initiative Autonomous Innovative Daring Work experience Overall recommendations No experience necessary Ability to read blueprints a plus Education background Overall recommendations High School Diploma or Equivalent recommended or comparable work experience About TRIGO Global Quality Solutions Founded in 1997, TRIGO is a multinational company providing operational Quality Management solutions for the manufacturing sector, especially in the automotive and aerospace industries. With a team of more than ten thousand professionals present in 20+ countries across 4 continents, TRIGO offers a comprehensive portfolio of Quality Assurance services ranging from inspection to expert auditing, consulting and training. The unrivaled expertise, industrial mindset and extensive global footprint that TRIGO has built up over the last 3 decades has made TRIGO the leading quality solutions provider using the latest innovative and reliable digital systems and standard processes, delivering results in the most demanding industries. TRIGO has recently started to expand its clientele by offering quality services to the medical, chemical and food industries. TRIGO Global Quality Solutions is committed to the core values of equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability.