Control valve technician jobs near me

Colorado Intergovernmental Risk Sharing Agency (CIRSA) has an opening for a traveling Risk Control Trainer covering multiple areas of Colorado. This hybrid 'work-from-home/office' position will need to reside/relocate in the Greater Denver, Metro Area of Colorado. Other residential areas of Colorado may be considered. Under the direction of the Risk Control Manager, the position is responsible for safety, risk management, environmental, and health training for municipal governments that are CIRSA members. The position is responsible for training development and delivery to include webinars, classroom, and hands-on safety and health training. Attendance at CIRSA-sponsored seminars, conferences, and safety & health fairs may be required and some general safety and health consultation may be involved. Position-specific administrative tasks will include, but shall not be limited to, both classroom and hands-on course development, training gear & supply procurement, training catalog development, standard operating procedure development, data entry & other software platform use. The position will be expected to travel regularly throughout the year, sometimes as much as 4 - 5 days per week, with overnight stays expected. This position will primarily service all regions of Colorado and travel in all weather conditions will be required. A CIRSA vehicle will be assigned for travel. Why you want to work here: At CIRSA, we recognize that our outstanding staff is the backbone of our organization. With that in mind, we have designed a valuable, comprehensive benefits package to meet the needs of our employees and their families. Current benefits include: Flexible work arrangements including work from home options 401(a) match of 10 percent 28.5 days of PTO & 13 paid holidays per year Medical, Dental, and Vision Insurance - high deductible health plans for individuals and families/domestic partnerships Fully funded Health Savings Account Voluntary 457(b) Deferred Compensation Plan Cafeteria Plan for dental, vision, and dependent care Short- and Long-Term Disability Life Insurance and AD&D Tuition Reimbursement Approved professional development & certification support, assistance, and maintenance Wellness Program including an onsite fitness center and personal trainer Employee Assistance Program Bereavement Leave Position Hiring Range: The salary range for the position is $64,400 - $99,900 annually, depending on qualifications.

Why join us? Applied is listed as one of the World's Best Employers by Forbes for 2021. We have earned the Outstanding Employer Support award from the US Navy and we are a GSA approved vendor. Applied has been fortunate to retain associates who have built long lasting careers. 25% of our U.S. team has 20+ years of service! In addition to competitive pay and all the benefits you'd expect from an industry leader (401K with company match, insurance, company vehicle, time off, employee assistance, tuition reimbursement, etc.) you will also enjoy: A LASTING CAREER - Career paths are available in sales, management, and operations throughout the country Professional development and training Team oriented company culture where it's called work for a reason but have fun in the process Join a local team with company backing Essential Functions & Responsibilities: Repair relief valves, control valves, on/off valves and pneumatic actuators in FCX actuation facility or customer plant locations. Mechanically and electrically troubleshoot, inspect, and test valves at specified job worksites. Primary worksites include FCX valve repair centers with occasional customer in-field work sites. Perform pre-testing, disassembly, cleaning, in process inspection, machining, lapping, painting, assembly, testing, and final inspection on various types of valves and actuation. Perform testing on certified test equipment, and complete all documentation by working under a QA / QC / National Board VR program. Complete field service worksheets and submit to job coordinator upon completion of work. Understanding of pneumatic and digital controls. Ability and knowledge to reference appropriate valve manuals for repair requirements. Exhibit an ability to effectively communicate with plant personnel regarding valve and instrumentation equipment and customer requirements. Obtain all site specific and safety related training to perform valve repair services. Maintain driver eligibility and regular preventative maintenance on company owned vehicle. Assist others as required. Job duties are subject to change as directed by management. Essential Mental Functions: Attention to detail. Good communication and customer service skills. Excellent math and mechanical skills. Willing to help in other areas of department as necessary. Essential Physical Functions/Equipment Used: Must be able to lift objects weighing up to 75lbs. Must be able to stand, kneel, and walk for long periods of time. Must be able to ascend and descend stairs, ladders and scaffolding. Must be able to, or possess ability to learn how to, operate large warehouse equipment; namely forklifts. Must be able to work off hours, weekends, and OT on a short notice basis based on business needs. Includes overnight travel to various locations and customer sites to provide service based on business needs. Knowledge of rigging, lifting and moving heavy and awkward products. Able to work in abnormal (heat/cold/clean room) operating conditions. Duties performed indoors & outdoors with exposure to weather, elements, heavy equipment, earth excavation, power tools, clean room, animal and insect bites, dirt and noise. Preferred Education/Experience: High School Diploma or Equivalent required; Associates Degree/Technical Degree preferred. 1-3 years previous control valve experience desired; experience with hydraulics/pneumatics helpful but not required. Basic computer proficiency required, namely the ability to operate Microsoft Office products. Knowledge of required equipment, including hand tools, power tools, machining equipment, etc. Clean driving record. Work Environment: Standard warehouse environment; including machine shop, paint booth, equipment operation, shipping & receiving, inventory area. Customer facilities will include indoor and outdoor environments, with exposure to all potential weather elements, clean rooms, factories, and others. Founded in 1923, Applied Industrial Technologies (NYSE: AIT) is a leading value-added distributor and technical solutions provider of industrial motion, fluid power, flow control, automation technologies, and related maintenance supplies. Our leading brands, specialized services, and comprehensive knowledge serve MRO and OEM end users in virtually all industrial markets through our multi-channel capabilities that provide choice, convenience, and expertise. Applied Industrial Technologies is built on a philosophy that puts people first. We are an equal opportunity employer, and we are committed to a workforce in which we enforce fair treatment and provide growth opportunities for everyone. All qualified applicants will receive consideration for employment regardless of age, race, color, national origin, genetics, religion, gender, marital status, physical or mental disability, or any other characteristic protected by applicable laws, regulations, and ordinances.

Job Description The job of the Quality Control Technician is to ensure compliance with cGMP requirements and company procedures while providing support to the QC team and throughout the QA and Operations departments. Additionally, this role is responsible for coordinating QC sample preparation and external laboratory shipments in relation to Environmental Monitoring activities and other required sampling. This role will work closely with the Production team and report quality data to department management, as needed. Duties/Responsibilities: Maintain retention materials and disposal when required. Assist with review and release of raw materials, API, excipients, and sterile supplies. Coordination of Biohazard waste destruction. Perform sampling and inspection of in-process and finished products. Assists with Environmental Monitoring and microbiological sample evaluation activities. Coordination of submitting samples for testing with third party vendors on their respective web portals or paper submissions. Logbook and controlled document generation. Assist with investigations and develop and implement corrective and preventive actions geared toward continuous process improvements. Review GMP documents including production environmental monitoring forms, room and equipment logs, etc. Support quality management system activities including document control and training program management. Other duties and tasks, as assigned. Required Skills/Abilities: Excellent independent judgement, written communication, verbal communication, and interpersonal skills. Strong attention to detail. Familiarity with Good Manufacturing Practices and FDA Regulations. Proficient in using Microsoft Word, Excel, PowerPoint, Outlook. Education and Experience: 1-3 Years as a Quality Control Technician Pharmaceutical, Medical Device, or biotechnology industry experience, preferably in support of manufacturing. Associate degree in the sciences or equivalent experience preferred. Physical Requirements: Ability to work in a clean room setting Prolonged periods of sitting at a desk and working on a computer. Must be able to lift up to 15 pounds at times.

As the QC Shader Technician, you will perform the testing on various color panels and prep them for the evaluation for the color shaders for automotive paints. You will work onsite full time in Cleveland, OH reporting to a Shift Supervisor. PPG offers excellent Medical, Dental, & Vision Benefits; 401k retirement savings; and Paid Vacation, Holiday pay. Main Responsibilities: Data entry into color portal and quality database Customer communication Prepare pre-ship samples for customers Use color measurement instruments and software to ensure accurate color shading Facilitate batch approval process Other duties as assigned and needed Qualifications: High School Diploma or GED is required Must be able to use color measurement instruments and software for color analysis and shading About us: Here at PPG we make it happen, and we seek candidates of the highest integrity and professionalism who share our values, with the commitment and drive to strive today to do better than yesterday - everyday. PPG: WE PROTECT AND BEAUTIFY THE WORLD™ Through leadership in innovation, sustainability and color, PPG helps customers in industrial, transportation, consumer products, and construction markets and aftermarkets to enhance more surfaces in more ways than does any other company. To learn more, visit *********** and follow @ PPG on Twitter. The PPG Way Every single day at PPG: We partner with customers to create mutual value. We are "One PPG" to the world. We trust our people every day, in every way. We make it happen. We run it like we own it. We do better today than yesterday - everyday. PPG provides equal opportunity to all candidates and employees. We offer an opportunity to grow and develop your career in an environment that provides a fulfilling workplace for employees, creates an environment for continuous learning, and embraces the ideas and diversity of others. All qualified applicants will receive consideration for employment without regard to sex, pregnancy, race, color, creed, religion, national origin, age, disability status, marital status, veteran status, sexual orientation, gender identity or expression. If you need assistance to complete your application due to a disability, please email ******************. PPG values your feedback on our recruiting process. We encourage you to visit Glassdoor.com and provide feedback on the process, so that we can do better today than yesterday. Benefits will be discussed with you by your recruiter during the hiring process. #LI-Onsite The base salary range for this position is $40,000 to $43,000. PPG pay ranges and benefits can vary by location which allows us to compensate employees competitively in different geographic markets. PPG considers several factors in making compensation decisions including, but not limited to, skill sets, experience and training, qualifications and education, licensure and certifications, and other organizational needs. Other incentives may apply. Our employee benefits programs are designed to support the health and well-being of our employees. Any insurance coverages and benefits will be in accordance with the terms and conditions of the applicable plans and associated governing plan documents.

A Valve Technician will modify, repair, and test valves in the valve shop. Key duties include disassembling, cleaning, and reassembling valves, performing pressure tests, lubricating parts, adjusting components based on diagnostic results, and maintaining detailed records of all work performed, often adhering to strict industry and safety regulations. Needs to understand Flow Control and how it works, and willing to demonstrate initiative when learning opportunities arise. Good work ethics, setting goals, and eager to adapt are keys to success. Must have Attention To Detail, it is a very important part of the job. The Valve Technician will also have responsibilities and tasks that need to be done daily. Housekeeping is a daily task. Requirements: The Valve Technician must have reliable transportation to and from work, must be punctual. The position may require long hours of operation depending on the workload. Although there may be times where there is overtime, it is not guaranteed. Diploma or GED is required 1-3 years of hands-on experience in valve operations or a related mechanical field. Forklift, Crane, Shop Press, Grinding Tools, Floor Scrubber, and Hydrotest Bench Operation will be required. Outlook, Excel, Word, and Basic Windows are required. Must be able to write a formal email and be able to upload data and documents as needed. Must have knowledge of basic hand tools, and some precision tools. Accurate record-keeping is essential for tracking maintenance activities, test results, and materials used. Keeping up with the calibration on gauges and precision tools. Forklift and Crane Inspection must be done daily. Must keep shop area clean, all tools must be put away daily.

Are you looking for a new challenge? Passionate about innovation? Want to work for a global company that values integrity, teamwork, and loyalty? At LATICRETE International, we aim to be the leading construction brand trusted globally for high-performance tile and stone installation systems and building finishing solutions. We've been in business for over 65 years, family-owned for three generations, and can be found in over 100 countries. The Hartford Business Journal even named us one of Connecticut's top family-owned companies in 2017! We don't just make innovative, industry-leading products. Our purpose is to improve the built world and the lives of those who build it. We strive to connect with, engage with and improve the lives of our employees, our customers, our partners, and the global communities in which we operate. We are seeking passionate and ambitious employees who want to make a difference not just within our organization, but within their communities, our industry, and the world. If that sounds like you, then what are you waiting for? Join the family and expand your horizons! Just some of our benefits: Medical Dental Vision 401k Tuition reimbursement 13 paid holidays in addition to paid vacation and sick time Flexible spending Life Insurance, AD&D and Supplemental Insurance Position Summary: The position is responsible for ensuring that all products manufactured meet or exceed quality standards as well as all safety, environmental and ISO requirements. This position will be in Quality Control and will assist the Production/Warehouse team if needed. ESSENTIAL DUTIES AND RESPONSIBILITIES - Additional duties and responsibilities may be assigned as necessary. QC Lab and Process Management (60%): Knowledge of QC related work instructions, procedures, and calibration/verification requirements of QC equipment. Ensure all lab test results, including CofAs and other pertinent information, are entered into the computer database (JDE) properly and within the designated time frame. Ensure QC test samples are obtained according to the Quality Requirements test level and maintain a storage system for retained samples. Responsible for updating test status in the QC report throughout the shift Assist in communications with production personnel to provide a smooth, efficient production flow of quality products, as needed. Ensure that all incoming raw material CoAs/COCs and equipment calibration/verification meet ISO 9001 traceability. Follow 5S cleaning schedule, maintain a clean work area, and care of equipment Send out a daily shift report of all QC testing performed on products received in the QC lab using the appropriate communication database or electronic format. Compare all Cof A's against the Master C of A to determine acceptance or rejection and enter all pertinent data into the computer system. Warehouse/Production Support (40%): Support will vary by Plant and can consist of (but not limited to) the following: General order fulfillment and material handling Order picking Inventory audits Order loading/Un-loading General Housekeeping (sweeping, vacuuming, removing packing materials/debris and equipment cleaning Staging and shift handoff Knowledge and use of RFGen gun for inventory control Various administrative paperwork and filing REQUIRED SKILLS & QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education and Experience: High School degree or equivalent required Associate's degree in science or engineering or 3+ years of QC laboratory experience preferred Able to communicate both verbal and written Able to read and interpret directions and order details Required Skills and Qualifications: Computer Skills: Strong knowledge of Microsoft Office (Word, Excel) and Outlook Good math skills for basic calculations, adjusting weights in formulas, and inventory counts Quality mindset Able to communicate both verbally and written Able to read and interpret directions and order details Ability to operate a forklift safely Able to operate RFGen Gun Physical Requirements: Must pass pre-employment physical. Lift: Must be able to lift and/or carry a minimum of 60 pounds. Push/Pull: Must be able to push/pull 55 pounds. Stand: Must be able to stand 80% - 85% of the day. Sitting: Must be able to sit 5% of the day. Twisting/Bending: Must be able to twist/bend 20% of the day. Squatting, Climbing and/or Crawling: Must be able to squat/climb/crawl 10% of the day. Specialized Skills and Experience: Demonstrates problem solving abilities, while communicating with superiors with appropriate solutions in a timely and efficient manner. Excellent organizational skills, ability to multi-task with competing priorities. Ability to be a self-starter, recognizing when tasks need to be accomplished. Strong analytical skills Possess the ability to roll-up the sleeves and execute daily QC responsibilities as required. May have strong technical knowledge or ability to leverage knowledge of chemistry in the following area(s): cementitious chemistry, epoxy liquids, latex, and/or any LATICRETE product lines Demonstrated ability to provide improvements for QC lab workflow, testing, and other QC related activities. Travel - 5%

The QA Document Control Technician will play a critical role in supporting clinical and commercial programs at our GMP manufacturing facility. This position will be responsible for managing the creation, revision, storage, and retrieval of all controlled documentation in accordance with GMP regulations and internal quality systems. The technician will ensure that documentation practices comply with regulatory standards while supporting continuous improvement initiatives in manufacturing processes. Responsibilities * Perform essential Document Control functions in a timely manner to support the efficient functioning of the Manufacturing Facility. * Register controlled documents, monitor and communicate revision and review cycles, and issue production documents. * Assist with organizing and maintaining the QA Documents Room by scanning, filing, and archiving GMP records. * Ensure documentation is maintained following internal procedures and regulatory requirements. * Move paper boxes and files as necessary. Essential Skills * Prior experience with document control. * Experience working with GMP or FDA regulations is strongly preferred. * Understanding of regulatory and documentation constraints in a GMP environment. * Great communication and writing skills required. * Proficiency with Word and Excel. Additional Skills & Qualifications * BS or associate's degree in science preferred, or high school diploma with 2+ years of industry experience. Work Environment This rapidly growing company is expanding its operations with two new sites in Columbus, Ohio, featuring state-of-the-art clean rooms and equipment. The position involves working in cross-functional teams in a modern and dynamic environment. Job Type & Location This is a Contract to Hire position based out of Columbus, OH. Pay and Benefits The pay range for this position is $22.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Columbus,OH. Application Deadline This position is anticipated to close on Dec 16, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Lingo Staffing is Now Hiring for a Quality Control Technician Supervisor in Cuyahoga Falls, OH Hours: 8:00 AM - 4:30 PM Days: Monday - Friday (OT as needed/required) Pay: $18-$30/hr (Based on Experience and Skill Level) Short Description: We are seeking an experienced Quality Control Technician/Supervisor to join a precision manufacturing environment. This position will support inspection and documentation for hardware, machine components, and assemblies. Qualified candidates may be considered for positions ranging from FAIR Coordinator to Quality Inspector or Quality Technician based on experience. Requirements: • Minimum 3 year of quality inspection or related manufacturing experience • Ability to perform dimensional inspection using micrometers, calipers, thread gauges, and other tools • Knowledge of blueprints, GD&T, and documentation standards • Familiarity with inspection plans, sampling plans, and First Article Inspection Reports (FAIR) preferred • Experience using QVI “Sprint MVP” optical CMM a plus • Strong computer skills - ability to manage reports, tech documents, and email communication • Excellent attention to detail and communication skills • Must be fluent in English • Must be willing to comply with a national background check Physical Requirements: This position requires walking approximately 2.5+ miles per day and standing for the entire shift. Must be able to bend, twist, stand, stoop, and lift as part of daily duties, with or without reasonable accommodation. We are Seeking Candidates who have held the job titles of: Quality Inspector, Quality Technician, FAIR Coordinator, CMM Operator, or Quality Control Specialist Full Job description/requirements available when interviewed #INDAKR

Job Description Join our team at ER Autocare in Columbus, OH as a Full Time Lot Technician / Quality Control Technician! This position is not just a job, but an opportunity to be part of a dynamic team in the auto repair industry. You'll have the chance to work onsite and ensure that our customers' vehicles are in top-notch condition before they hit the road. Your attention to detail and dedication to quality will make a real difference, all while being surrounded by a fun and energetic company culture. If you're looking to be part of a high-performance team that values excellence and integrity, this role is perfect for you. Don't miss out on this exciting opportunity - apply today! You will be offered great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Competitive Salary, and Paid Time Off. Let us introduce ourselves We are a busy automotive repair company with 4 locations around Columbus, Ohio. We provide an upscale auto repair experience and we are "Masters Of Our Craft". Your day as a Lot Technician / Quality Control Technician As a Lot Technician/Quality Control Technician at ER Autocare in Columbus, OH, your primary responsibility will be to guarantee a top-notch customer experience by conducting thorough Quality Control Inspections and Mini-Cleans on vehicles post-repair or service. Additionally, you'll play a crucial role in maintaining the cleanliness and organization of the shop, including stocking supplies, ensuring shop floors are debris-free, and keeping the exterior grounds clean. Your attention to detail and commitment to cleanliness will directly impact the overall customer satisfaction. In addition to these primary duties, you may also have the opportunity to assist with driving company vehicles for parts pick-ups and customer shuttles, support the Rental Car fleet, and perform tire repairs and installations. This role offers a dynamic mix of responsibilities in a fast-paced and customer-focused environment. What matters most To excel as a Lot Technician/Quality Control Technician at ER Autocare in Columbus, OH, you must possess a positive attitude, a sense of urgency, and reliability in your work. A clean driving record and the ability to operate a manual transmission vehicle are essential for this role, as driving company vehicles may be required. Enjoying the cleaning and maintenance of cars and facilities is crucial, as you will be responsible for keeping the shop and grounds pristine. A basic knowledge of automotive operations is beneficial, allowing you to understand the vehicles you'll be working with. Overall, a combination of a strong work ethic, attention to detail, and a willingness to learn and adapt in a fast-paced environment will set you up for success in this position. Knowledge and skills required for the position are: You must have a good attitude Be fast-paced Dependable and punctual. A clean driving record and being able to drive a car with a manual transmission is required. You must enjoy cleaning cars & buildings! A basic understanding of how a car works Are you ready for an exciting opportunity? If this sounds like the right job for you, don't wait - apply today to join our team. We look forward to hearing from you!

Nature and Scope The Environmental Monitoring Team is responsible for the activities associated with the manufacture of safe, effective, and sterile pharmaceuticals in accordance with company SOPs, policies, and cGMPs. The Environmental Monitoring Team works in concert with and assists the manufacturing department, and plays a critical role in ensuring environmental control of the aseptic manufacturing facility. The EMT I position is primarily responsible for performing environmental monitoring activities including water collection, air, surface and personnel monitoring within the sterile manufacturing facility. Essential Duties and Responsibilities Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Plan daily workload to meet requirements. Conduct environmental monitoring activities including air, surface and personnel inside the sterile manufacturing areas. Conduct water sampling throughout facility. Record results and report deviation from specifications. Communicate any discrepancies or deviations to supervision/management upon discovery. Ensure all work is performed and documented in accordance with existing company policies, procedures, Current Good Manufacturing Practices, and health and safety requirements. Inputs data into database and conduct trend analysis. Perform any other tasks/duties as assigned by management. Education Requirements and Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. High School Diploma or GED equivalent required. Associate Degree in microbiology, biology or related scientific field preferred. Academic or industry work experience in laboratory setting or manufacturing with focus on microbiology preferred. Knowledge of aseptic technique preferred. Must be able to maintain Class 100 Certification for EM support. Ability to work independently with minimal supervision. Organization and attention to detail. Excellent communication skills (Oral and Written). Working knowledge of MS-Office software and PC Skills Required. Good work ethic and highly motivated. Ability to work in a fast paced environment. Ability to work in a team oriented environment. Must be able to read documents in Standard English such as Standard Operating Procedures, maintenance schedules and operating manuals. Ability to work overtime as needed. Physical Environment and Requirements Physically able to wear cleanroom/protective gowning and equipment, including but not limited to gowning, goggles, face shields, respirators, and protective gloves. PPE and Respirators are essential for the health and safety of employees. Specific vision requirements include 20/40 near vision (can be corrected with eyeglasses or contacts) and color vision. Employees must maintain a clean-shaven appearance each working shift to wear tight-fitting respirators properly. Employee must be able to occasionally lift and/or move up to 25 pounds. Job activities require long periods of standing and use of controlled movements as well as aseptic techniques/behaviors in the sterile filling suites. American Regent celebrates diversity and we are committed to creating an inclusive environment for all employees. We are an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, or protected veteran status. Applicants have rights under Federal Employment Laws. FMLA poster: ********************************************************** Know Your Rights: Know Your Rights: Workplace discrimination is illegal (eeoc.gov) Employee Polygraph Protection Act: ********************************************************* Alert: We're aware of individuals impersonating our staff to target job seekers. Please note: · All legitimate communication will come directly from a verified ARI recruiter either by phone or via an americanregent.com email address. · Our recruiting process includes multiple in person and/or video interviews and assessments. · If you are unsure about the legitimacy of a message, contact John Rossini at *************************** before responding. · We never request payment, bank information, or personal financial details during our offer process. Your security is important to us, and we encourage you to stay vigilant when job searching. American Regent Inc. endeavors to make *********************************** accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please email **************************************.

Are you looking to power the next leap in the exciting world of advanced electronics? Do you want to help solve problems that drive success in the rapidly evolving technology and connectivity landscape? Then bring your problem-solving, passion, and creativity to help us power the next leap in electronics. At Qnity, we're more than a global leader in materials and solutions for advanced electronics and high-tech industries - we're a tight-knit team that is motivated by new possibilities, and always up for a challenge. All our dedicated teams contribute to making cutting-edge technology possible. We value forward-thinking challengers, boundary-pushers, and diverse perspectives across all our departments, because we know we play a critical role in the world enabling faster progress for all. Learn how you can start or jumpstart your career with us. We are seeking a dedicated and detail-oriented QC Lab Technician to join our Quality Control team. This role is responsible for performing routine and non-routine testing of in-process samples, final products, and raw materials to ensure compliance with internal and external specifications. Shift: Rotating 12-hour night shifts (7:00 PM - 7:30 AM) Key Responsibilities * This position is responsible for equipment, as well as, set up, operation, calibration (as required by method and instrument parameters), routine maintenance and troubleshooting of laboratory instrumentation. * Conduct routine testing of raw materials, in-process samples, and finished products. * Perform additional analyses as requested by supervisors or other departments. * Operate and maintain laboratory instruments including (but not limited to): ICP-MS, GFAA, LC, GC, GPC, NMR, FTIR, titration equipment, density meters, and turbidity meters. * Accurately document results and maintain records in the Laboratory Information Management System (LIMS). * Manage multiple samples and tasks simultaneously in a fast-paced environment. * Work independently during night shifts, ensuring timely and accurate testing. * Maintain a clean, organized, and safe laboratory environment. * Communicate effectively with team members and other departments regarding results and issues. Qualifications * Bachelor's degree in Chemistry or a related field is highly preferred * Previous experience in a laboratory setting, preferably in a QC or analytical lab. * Familiarity with LIMS systems and standard lab documentation practices. * Strong problem-solving skills and attention to detail. * Excellent organizational and multitasking abilities. * Effective written and verbal communication skills. * Ability to work independently and take initiative. Preferred Skills * Hands-on experience with analytical instruments: LC, GC, GPC, NMR, FTIR. * Proficiency in wet chemistry techniques including titration, density, and turbidity measurements. * Prior experience in a regulated lab environment. * Preferred experience working in the semiconductor or chemical field. Join our Talent Community to stay connected with us! Qnity is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information. Qnity offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page.

This position will be part of the quality control team and perform quality review of production art and pre-press jobs to ensure products are produced accurately to supplied specifications in a timely manner by performing the following duties. The quality control operator must thrive in a professional, fast-paced environment, juggling multiple projects. Work is typically performed under supervision, receiving guidance from senior operators about how the work needs to be completed. This is a temporary role, onsite in Cincinnati OH. Essential Responsibilities, Accountabilities & Results * Inbound Inspection * Confirm PO, item codes, and quantities against the packing list and client requirements. * Check print quality against approved proof: * Color accuracy (match to proof or color standard). * Print registration (alignment of colors and elements). * Proper cutting and trimming (dimensions and tolerances). * Ensure all paperwork is complete and accurate. * Outbound Inspection * Verify case count, piece count, and SKU accuracy against client QC requirements following ANSI/ASQ Z1.4 for acceptance sampling. * Inspect packaging, labeling, and documentation for compliance. * Check for damages, shortages, or overages before shipment. * Apply 5% variance allowance for shortages or overages per client tolerance guidelines. (NEED JAMIE TO DETERMINE THE ACCEPTABLE VARIANCE) * Complete outbound QC checklist mirroring client inbound QC sheet. * Document findings and escalate discrepancies promptly. * QC Rider Form Review * Review all QC Rider forms attached to production orders for 100% compliance. * Ensure each Rider form is complete, accurate, and properly signed off. * Escalate any inadequate or incomplete Rider forms to the Plant Manager immediately. * Collaboration & Reporting * Communicate issues to Project Management and Operations teams. * Provide detailed notes for next steps when discrepancies occur. * Ensure QC documentation is accurate and filed for traceability. * Document Control * Maintain accurate records of all outbound QC checks, Rider form reviews, and sampling results. * Store QC documentation in the designated system or shared repository for easy retrieval and audit. * Ensure all QC records are organized by project and available for client review upon request. * Process Familiarization * Learn and assist with in-process QC (PrePress, Print, Finishing and Collation) as time permits. * Support continuous improvement initiatives related to quality. Competency Requirements * Must be able to work with various software applications commonly used on Mac's and PC's. * Basic color management skills and the ability to understand and recognize color match accuracy. * Basic understanding of print processes and how each color affects another. * Must possess excellent organizational, interpersonal, and communication skills. * Motivated self-starter with the ability to manage multiple tasks and work independently with a commitment to detail and accuracy. Educational & Experience Minimum Requirements This position requires the following knowledge and skills: * High School Diploma or GED equivalent. * Enjoys focusing on the details, ability to quickly recognize defects * Work in a pre-press/printing environment preferred * Strong computer skills including ability to learn new software usage quickly. * Full comprehension in reading work instructions and business memos. * Able to effectively communicate, especially through written instructions and evaluations. * Proofreading skills required. * Ability to work independently after initial training. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The following physical requirements are commonly performed in this job. There are times, on occasion, when the employee may be asked or expected to perform duties with physical requirements that are different from those listed here. It is the employee's duty to notify the management of any physical limitations or inability to perform a certain task. * While performing the duties of this job, the employee is regularly required to talk and hear. * This position requires periodic standing, walking, bending. * The employee may occasionally lift or move items up to 40 pounds. * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Our compensation reflects the cost of labor across several U.S. geographic markets, and we pay differently based on those defined markets. The U.S. pay range for this position is $30.00 - $35.00 USD hourly. Ultimately, in determining pay, we will consider the successful candidate's location, experience, and other job-related factors. Group benefits currently include a selection of health care plans with prescription drug coverage, dental plan, vision plan, basic and supplemental life insurance, a flexible spending account for medical and dependent care expenses or a health savings account based on plan selection, short/long term disability and 401(k) Savings Plan.

Quality Control (QC) Technician Emerging from MIT, Poly6 is an exciting, innovative manufacturing company that specializes in the development and production of advanced additive manufacturing and ceramic components for aerospace turbomachinery. We deliver high-performance products that meet the rigorous demands of quality, durability, and precision required for next-generation turbine engines while helping reduce greenhouse gas emissions. At Poly6, you will have the opportunity to work alongside a highly talented team to solve problems in one of the world's most complex engineering sectors: aviation. WHAT WE OFFER Weekly Pay for Hourly Employees Comprehensive Benefit Plans Quarterly Bonus Opportunity 401k with Company Match Emphasis on Employee Engagement Paid Holidays and Vacation Time Tuition Reimbursement Opportunities for Advancement JOB SUMMARY As part of manufacturing process operations, the Quality Control Technician is responsible for hands-on inspection of manufactured parts in a fast-paced ceramics-parts production environment. This role is responsible for identifying visual and dimensional defects using magnification tools and ensuring that all parts meet strict quality and compliance standards. PRIMARY RESPONSIBILITIES Interpret and follow written work instructions, technical drawings, and SOPs to ensure product compliance with specifications. Identify nonconforming materials and escalate findings according to Standard Operating Procedures (SOPs) and regulatory or customer quality standards. Perform visual inspections using a magnifying glass or microscope for extended periods to detect surface, cosmetic, or structural defects in highly intricate and delicate ceramic parts. Accurately record and report defects into a MES (Manufacturing Execution System) system to ensure a high degree of data integrity. Communicate effectively with production, quality, and engineering teams to address quality issues. Support continuous improvement initiatives by identifying recurring defects or process gaps. Maintain adherence to 6S standards by ensuring quality inspection areas are clean, organized, and compliant with safety and operational procedures. Perform other duties as assigned QUALIFICATIONS Must be a U.S. Person as defined by U.S. export control laws (U.S. citizen, lawful permanent resident, refugee, or asylee) to comply with applicable government regulations including the International Traffic in Arms Regulations (ITAR). Education: High School Diploma or GED, or equivalent certification/work experience in quality control/inspection role in a production environment. Experience: Minimum 1+ years of experience in a manufacturing or production environment in a quality control or inspection role, or other applicable industry related work experience preferred. Strong attention to visual detail, including the ability to perform inspections under magnification for prolonged periods on highly detailed parts or assemblies. High level of dexterity to work on detailed surfaces that with small hand movements. Ability to work independently with minimal supervision and maintain a high level of accuracy. Proven ability or familiarity with SOPs, work instructions, and inspection documentation. KNOWLEDGE, SKILLS, & ABILITIES Ability to speak, read, understand, and adhere to work instructions and standard operating procedures in English. Ability to engage closely with engineers to develop and execute experiments as requested. Experience in pharma, bio, med device, defense, or aerospace manufacturing or related experience with highly detailed quality inspection preferred. Ability to pass standard vision and hearing test as part of pre-employment testing. Comfortable performing work in a manufacturing production area. Ability to sit or stand for long periods using fine visual inspection tools with magnification. Use of personal protective equipment (PPE) and adherence to safety protocols is required. Ability to handle, adjust and transport fragile manufactured parts regularly across the production floor WORKING ENVIRONMENT Working Environment: Manufacturing floor Required PPE: Check for required PPE in areas you may be working in This is a full time position

M.H. Eby, Inc.- a leading manufacturer of aluminum trailers and truck bodies is looking for a Quality Control Specialist to work in our fast-growing company. Candidates must be trainable and willing to learn! At M.H. EBY, Inc., we foster a culture that rewards initiative, hard work, and teamwork. Join our dynamic team and grow your career with us. Benefits: * Paid Time Off after 90 days * Paid Holidays * 401K & Profit-Sharing Plan * Medical and Dental insurance * FSA * Life Insurance * Short Term Disability Insurance Position Summary: Responsible for confirming materials/parts will be available to meet the production schedule. Other responsibilities include bill of materials review, providing technical support to Purchasing, Production and Engineering for drawing revisions, design revisions, supplier quality etc. Essential Duties and Responsibilities: Effectively comply with all company safety standards Effectively complete Green Tag process for complete units Perform Quality Control checks Prepare Quality Control documents and first article inspection documents. Participate in team initiatives intended to optimize safety, quality, productivity, and overall efficiency. Solicit input from all plant personnel on ways to improve the overall quality and efficiency of the operation. Interface with manufacturing personnel, purchasing personnel, etc. on material status and quality issues. Review completed unit work packages for completeness and submit for completion of Green Tag Process Will be required to perform other duties as requested, directed, or assigned. MH Eby, Inc is a third-generation family-owned company established in 1938. Headquartered in Lancaster County, Pennsylvania with 7 additional locations spanning from Ohio to Montana, Eby designs and builds aluminum transportation equipment including Livestock, Grain and Equipment trailers, and a full line of truck bodies. All locations offer comprehensive service and parts to support our customers. All applicants will be considered. Potential hires must pass a physical and drug screen before starting employment. Experience is preferred but we will train the right candidate. Starting wage based upon experience.

INNOMARK delivers Visual Marketing solutions that attract attention, engage shoppers, and convert sales. Our mission is to create retail experiences that connect brands and consumers through effective visual communication. In-house design, engineering, printing, manufacturing, and fulfillment guarantee excellence from concept to completion. Visit ******************* to learn more about our work, history, and culture. Job Summary: The Quality Technician position will perform the necessary task outlined in our food quality procedures, ensuring that processes are followed in the GMP and Food Safety area. This position will be a key component working toward accomplishing safe, efficient steps to provide a quality product throughout the Food Safety program. Duties/Responsibilities: Inspection of incoming key components (as required) Perform documented quality approvals and inspections Execute testing of product per PQCT or as directed Assist in internal audits (ISO, Safety & Security, Sanitation, HACCP, etc.) Complaint handling - input of information, Customer, Internal and supplier Assist in updating quality procedures Conduct final inspection of finished product to customer /IPS quality specifications Record and file inspection results Give feedback to operators as necessary Pull, monitor, and file customer, retains and samples for specific retention periods Assist in job jacket closing as requested or required Assist with Root Cause Analysis of Internal or External complaints when required Inspect pallets of product for compliance with label and packing requirements Provide COC/COA and verify labeling and quantities are correct Promote Safety, Quality, and increased productivity in all areas of the company Give appropriate feedback to operators, project managers and supervision Perform calibration of test, inspection, and measurement devices Assist in Mock Recalls and collecting of information Provide training on instructions, procedures, and policies with required signoff Special projects as requested Assist the Quality Manager, or Plant Management as requested Responsible for assuring (and enforcing when needed) compliance to quality procedures and instructions. Required Skills/Abilities: Must have comprehensive knowledge of the printing industry. Ability to lead and direct the activities of a diverse group of employees. Excellent verbal and written communication skills. Excellent organizational skills and attention to detail. Excellent time management skills with a proven ability to meet deadlines. Must have basic math skills. Education and Experience: High school diploma or equivalent. Benefits Start Day 1 Medical Insurance Dental Insurance Vision Insurance Paid Holidays Paid Time Off Flexible Spending Account Innomark is an Equal Opportunity Employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital statis, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, or veteran status.

Click Here to watch our Realistic Job Preview Video *Shift Works: Nights: 6 pm - 6:30 am = 2 X 2 X 3 2 days working and 2 days off then 3 days working and 2 days off Position operates equipment that blends raw materials to create beverage products to exact specifications. Position is responsible for weighing, measuring, and mixing ingredients to standards. Performs routine tests to ensure resulting mixture meets specified properties and consistencies. Performs periodic sampling of products as they are being bottled/canned to ensure continuous meeting of standards including product quality, fill levels, labeling, freshness dating, and container integrity. Records test data and communicates modifications to the manufacturing process to eliminate any irregularities. May be required to periodically deep clean and sanitize blending/filling equipment and production lines. This job may require lifting/carrying cases weighing 20-45 pounds repeatedly over 10-12 hour period and continuous standing and walking, manipulating and handling product samples while sitting. PRIMARY ACCOUNTABILITIES: * Operate and monitor production line(s) to ensure efficiency * Remove or shift materials and/or finished products to facilitate proper flow * Perform tests and use special equipment to ensure package and product quality * Operate all manufacturing equipment efficiently and safely * Clean equipment and area during and after shift * Maintain clean work area through good housekeeping practices * Follow process guidelines and expedite quality concerns to management * Work with production/maintenance as necessary * Keep daily records tests performed and results * Regular, reliable, predictable attendance

Vector Technical's partner is the largest privately held Heat Treat company in the US. This stable manufacturing company in Willoughby, OH, is seeking Quality Control Lab Technician for their busy operation! Available Shifts: 2nd Shift $19.57/hr. + $1.00 shift diff = $20.57/hr. 3rd Shift $19.57/hr. + $1.10 shift diff = $20.67/hr. ** MUST be able to train on 1st Shift ** (base pay increases to $21.11 once fully trained) Responsibilities Support production by verifying cycle, process, calibration and part conformance to customer specifications. Prepare data, graphs, orders, logs and certifications for customers and management. Maintain files for part/process conformance & customer specifications. Notify Production & QA Management of non-conforming product on timely basis to avoid it being shipped or run in next operation. Make checks on loads in process as needed/required Review furnace/equipment charts for accuracy and compliance to requirements. Prepare certs/cert packages per customer requirements and review for compliance - This will be a large part of your daily duties Perform hardness testing as required by customer requirements and review for compliance Verify hardness and pyrometry calibrations/surveys are maintained to requirements. Send random samples of braze materials for cert verification. Collect results and compare. Report all non-conformances to Braze/Production Management. Maintain needed reference/QMS record materials such as furnace charts, specs, requirements, logs Qualifications High school diploma or GED

2nd & 3rd Shift Quality Technician(s) Hebron, OH, Title: 2nd Shift - Quality Technician (Wed-Sun) / 3rd Shift - Quality Technician (Mon-Fri) Department: Quality ControlReports to: Quality Control ManagerLocation: Hebron Job Summary: Available Schedules: 2nd Shift; Wednesday - Sunday (weekends required) 3rd Shift; Monday - Friday The Quality Technician is responsible for ensuring product quality through rigorous laboratory testing, inspection, and documentation. This role involves performing routine and non-routine quality control tests on manufactured products and incoming materials, managing equipment calibration, and supporting compliance with industry standards (e.g., ISO 9001, ISO 13485, SQF). The ideal candidate is detail-oriented, proactive, and possesses strong quality control expertise. Job Duties: Quality Control Testing: Conduct routine and non-routine laboratory tests on manufactured products and incoming raw materials to verify compliance with quality specifications and acceptance criteria. Raw Material Verification: Review and archive Certificates of Analysis (COAs) for raw materials, ensuring adherence to quality standards. Data Management: Accurately enter test data into inspection databases (e.g., Movex) and generate customer COAs, ensuring data integrity and traceability. Equipment Calibration: Manage and execute the test equipment calibration program to ensure accurate and reliable measurements, supporting third-party onsite calibrations as needed. Sample Management: Collect, organize, and store sample retains in an orderly manner for future reference and audits. Non-Conformance Handling: Identify, document, and communicate quality issues or deviations to the Quality Control Manager, assisting in initial customer complaint investigations. Process Audits: Conduct layered process audits and internal audits to ensure compliance with ISO 9001, ISO 13485, SQF, and other relevant standards. Reporting: Prepare graphs, charts, and reports to communicate quality metrics and trends, escalating lab concerns promptly to the supervisor. Continuous Improvement: Support quality improvement initiatives by analyzing test data, identifying trends, and recommending corrective and preventive actions (CAPA). Safety and Compliance: Adhere to all safety, health, and environmental regulations, maintaining a clean and organized workspace through daily 5S practices. Collaboration: Work collaboratively with production, engineering, and quality teams to resolve quality issues and support operational goals. Other Duties: Perform additional tasks assigned to support the Quality Control department. Job Qualifications: Education: High school diploma or GED required; associate's degree in applied science, Quality Control, or a related field preferred. Experience: Minimum of (1) year of experience in quality control or quality assurance, preferably in a manufacturing or materials science environment, or an equivalent combination of education and experience. Technical Skills: Proficiency in using precision measurement tools (e.g., calipers, micrometers, spectrometers) and quality control methodologies (e.g., Statistical Process Control (SPC), Root Cause Analysis (RCA). Knowledge of industry standards, including ISO 9001, ISO 13485, and SQF. Familiarity with quality management systems (QMS) and ERP software Analytical Skills: Strong ability to interpret technical specifications, analyze quality data, and identify deviations to ensure product conformity. Organizational Skills: Exceptional attention to detail, with the ability to prioritize, multitask, and maintain organized records and sample retains. Communication: Excellent verbal and written communication skills to interact professionally with employees, suppliers, and customers. Computer Proficiency: Proficient in Microsoft Excel and Word for data analysis and reporting; experience with quality management software is a plus. Problem-Solving: Ability to troubleshoot quality issues, propose solutions, and implement corrective actions. Teamwork: Willingness to work independently or collaboratively as part of a team to achieve quality objectives. Physical Requirements: Ability to stand for extended periods, lift up to 25 lbs, and perform repetitive tasks as needed. Preferred Qualifications: Experience with Lean Manufacturing or Continuous Improvement methodologies. Familiarity with regulatory requirements specific to materials manufacturing or related industries. Knowledge of automated inspection systems or advanced quality control technologies. Work Environment: The role involves working in a laboratory and manufacturing environment with potential exposure to chemicals, machinery, and moderate noise levels. Adherence to safety protocols and proper use of personal protective equipment (PPE) is required #IES1

Production Team Member - Quality Control Lab Technician Paulo Cleveland - 4428 Hamann Pkwy Willoughby, OH 44094 Wage: $19.57 + shift premium Additional Shift Premium: +$1.00 for 3rd shift Opening is on 2nd, schedule is M-TH and Sunday. Training will be on 1st shift. Paulo Products company is the largest privately held Heat Treat company in the United States and has been in business for over 75 years. We have 5 locations in the Midwest and have recently expanded into South America. We are looking to fill a Quality Control Lab Technician role in our plant in Willoughby, OH (44094). This is a permanent position that offers stability and the opportunity to grow within the company. Paulo is looking for people who are seeking a career, not just a job. Experience in heat treating isn't necessary, but a willingness to learn, grow, and improve your skills is. KEY RESPONSIBILITIES: * Support production by verifying cycle, process, calibration and part conformance to customer specifications. Prepare data, graphs, orders, logs and certifications for customers and management. Maintain files for part/process conformance & customer specifications. * Notify Production & QA Management of non-conforming product on timely basis to avoid it being shipped or run in next operation. * Make checks on loads in process as needed/required * Review furnace/equipment charts for accuracy and compliance to requirements. * Prepare certs/ cert packages per customer requirements and review for compliance * Perform hardness testing as required by customer requirements and review for compliance * Verify hardness and pyrometry calibrations/surveys are maintained to requirements. * Perform order writing as required, mainly on the off shift. * Send random samples of braze materials for cert verification. Collect results and compare. Report all non-conformances to Braze/Production Management. * Answer phones as needed, either handling the call or sending it to the proper authority. * Prepare all records with accuracy, neatness, & completeness that allows for future reviews. * Assure all records generated are filed properly and maintained * Handle log-in & closure of Reject Reports - consistent with the CAIR flow chart. Handle needed Customer contacts for reject reports and production issues. * Maintain needed reference/QMS record materials such as furnace charts, specs, requirements, logs. * Updating specification matrixes, completing customer documentation notice packets, and submit new specs for CHQ or internal review. * Identify, document, & maintain new or changed certification/cert packet special requirements per customer * Customer contact as required by leader or management. * Assure important/key information is shared with other quality people to maintain QC objectives & goals.