Controls engineer jobs in Albuquerque, NM - 85 jobs

At AV we provide a full suite of exquisite, space-qualified hardware trusted to fly in the most extreme environments space presents across GEO, MEO, LEO and Cislunar orbits. With hundreds of systems flying in space, our customers turn to AV when a mission can't fail. Our team is expanding to do the big things that have never been done before - the things the nation and the world are counting on us to deliver. Join the transformation and help us make this impact now. JOIN US FOR OUR INVITATION-ONLY HIRING EVENT ON FEBRUARY 24. APPLY TODAY TO BE CONSIDERED FOR THIS SPECTACULAR EVENT. We are seeking electrical engineers at all levels. The selected candidates will join a dynamic team working to put Great Systems on Orbit with capabilities to perform leading edge tasks in laser communications, space electronics and sensors. On any given day, the successful candidates may be asked to perform the following duties: Design custom high speed digital electronics including the use of ADCs, DACs, FPGAs, processors, and communications drivers. Design, and conduct analysis of, analog circuits including low-noise signal conditioning and power amplifiers. Provide expertise to both product development and R&D efforts. Collaborate with peers, leads, and managers to develop, review, and refine designs and analyses to meet program technical needs within defined time and budget constraints. Work within a broad-disciplined program team providing expertise in support of electronics manufacturing and test. Required Qualifications: Bachelor's degree in electrical engineering 2 years' experience in design, analysis, integration, and test of custom electronics. Proficiency in electrical design software and simulation tools (such as Altium, SPICE, MATLAB, Simulink, HyperLynx, and MS Office). Ability to conduct circuit analysis and simulation to optimize performance and reliability. Ability to obtain and maintain a US security clearance. Desired Qualifications: Understanding of space qualification standards and requirements. Experience designing custom electronics for space products. Experience designing to a defined requirements set. Experience with analysis necessary for high reliability space electronics hardware (Electrical stress analysis, worst case circuit analysis and reliability analysis) Experience and understanding of PCB manufacturing and assembly processes. Experience producing board layouts is a plus Understanding of relevant IPC standards needed for electrical design and fabrication. Experience leading sub-assemblies or circuit card designs with small teams of two or three. Experience developing and conducting testing of complex electronic sub-assemblies along with design of special test equipment (STE). Experience deriving sub-assembly requirements from higher-level, flowed down, system requirements and defining test methodologies. Experience developing design & verification documentation (Interface Control Document/Drawings (ICD), Design Description Document (DDD), Test Plan, Test Procedures, Test Reports, etc.). Written and verbal communication skills necessary to present designs to internal and external stakeholders. Able to complete assigned work within a defined timeline and budget. Clearance Level No Clearance ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR

Company: The Boeing Company Boeing Defense, Space & Security (BDS) seeks a System Controls Engineer (Lead or Senior) with experience in closed loop control systems architecture development, design, implementation, integration and test for a new program in Albuquerque, NM. The new program is responsible for designing and testing advanced concepts for the US Government. This position will be responsible for controls system requirements definition, controls architecture development, integration and test, V&V of requirements, and system support throughout the product lifecycle. The person chosen for this position will serve as a lead/senior controls engineer and work closely with the other lead engineers (electrical, mechanical, optical and software) in designing and implementing the overall control system. Primary Responsibilities: Work in a team environment to develop overall closed loop control system for large complex optical systems. Work in a team to develop requirements for control system. Support electrical, mechanical, firmware and software teams as the controls SME. Support integration and test of the control loops into the system. Work in a team to develop verification and validation plans to ensure control requirements are met. Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 5+ years of experience programming in control system development Preferred Qualifications (Desired Skills/Experience): 10+ years of related work experience or an equivalent combination of education and experience 5+ years of experience developing electronic equipment used in controls Experience in control of optical systems (gimbals, fast steering mirrors, etc.) Experience with electro-optical systems (EO systems, electro optics) Prior experience leading an engineering team Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for lead (level 4): $142,200 - $192,300 Summary pay range for senior (level 5): $170,850 - $231,151 Language Requirements: Not Applicable Education: Bachelor's Degree or Equivalent Relocation: This position offers relocation based on candidate eligibility. Export Control Requirement: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

With over 40 successful years in business with over 35 facilities across the USA this engineering firm has been named on the ENR Top 500 Design Firm list and has continued to climb in rank over the years. In addition, they have been named as a certified integrator by many vendors, as they do not focus on just one platform, but their engineers work with the customer to choose the best platform for each application. With 600 employees nationwide, they have become one of the largest and established firms in the United States. Reasons to work for this company: Opportunity to get involved with challenging projects across many different industries Enjoy 3-day weekends! (You have the option to work 4 10-hour days Monday through Thursday.) Comprehensive medical/dental insurance Mentoring and training. Career growth with both technical and management tracks. Flexible work schedules 401K match and Employee Stock Ownership Plan (Employee-owned) They have a great reputation in the industry and with their customers Job summary You will be responsible for controls engineering project requirements involving PLC programming, HMI/SCADA programming, control panel design, instrumentation specification, check-out support, and commissioning assistance. What you will do: Project execution: Task identification, prioritization, and scheduling with personal accountability to ensure commitments are met. Early problem identification and conflict resolution. Working under the direction of other experienced engineers Continuous improvement: methodology, lessons learned, templates, efficiency tools, etc. to streamline project execution. Direct/frequent communication and interaction with clients. Ensures compliance with all regulations, codes, etc. as they apply to the contract and project(s). Technical writing including project definition and requirements, clearly delineated status reporting, process control sequence of operations, standard practices and procedures, scope of supply, requests for information, customer correspondence, and code commenting. Provide engineering design, development, and implementation including software (DCS/PLC, HMI, etc.). Provide support to the lead engineer for hardware engineering (systems integration, instrumentation callout, panel layout, and construction), and systems design (integration of the various components on any given project). Support factory/site acceptance testing, user acceptance testing, and user training. Programming control logic, graphics construction, device communication, database configuration, etc. Read, interpret, and update documents, drawings, and specifications related to process control and automation projects. Typical documents may include PFDs, P&IDs, single-line diagrams, cable and conduit schedules, instrumentation and control data sheets, I/O lists, etc. To be successful in this role you should possess the following: Education: BA/BS degree in engineering or related discipline (Electrical, Chemical, Controls or Computer Engineering degree preferred). Technical degree and equivalent experience may be substituted. Experience: 3+ years of directly related experience in process control and/or manufacturing and/or information services. PLC, DCS, and/or SCADA/HMI design, development, and deployment experience. Strong leadership and client relation skills. Good engineering and good documentation practice. Experience (or willingness) using collaboration tools (such as SharePoint) to work effectively within remote teams. Computer proficiency with Microsoft Outlook, Excel, and Word. SharePoint experience is a plus. Exceptional verbal and written ability with the aptitude to communicate professionally with clients and project leadership. Must have a valid driver's license and ability to travel up to 25%. It would be great if you had experience with the following: Diverse Process Knowledge: Oil & Gas, Chemicals, etc. Schneider Unity programming experience Allen Bradley ControlLogix programming (PlantPAx a plus) experience. SCADA/HMI experience (AVEVA/Wonderware or ICONICS a plus). Checkout, testing, startup, and commissioning experience To comply with some state laws, the annual base salary range for this position has been provided. The range given is broad and should be considered as a guideline only. Our client will consider a candidate's work experience, education/training, key skills, the salaries of current employees in similar roles, and other factors when extending an offer.

Job Description Controls Systems Engineer Albuquerque, NM Direct/ Perm, hybrid/ flex schedule, 80k-140k Base, Full Benefits, Bonuses, 401k, ESOP, ENR top 500 US Citizens Only This position is responsible for controls engineering project requirements involving PLC programming, As a Controls Systems Engineer, you will be responsible for Hardware, Software, and Field. The ideal Candidate will be tasked with PLC, HMI/ SCADA programming, control panel design, instrumentation specification, check-out support, and commissioning assistance. You will work closely with the clients, project managers, and multidisciplinary teams to deliver integrated control solutions that meet or exceed customer expectations. ROLE/ RESPONSIBILITIES • Develop control system software, including DCS/ PLC programming and implementation, HMI design, and SCADA configuration. • Design, develop, and implement control system logic software and hardware to meet process, machine, and integrated system requirements. • Develop control logic software and user interface applications. • Support hardware engineering (systems integration, instrumentation callout, panel layout, construction) • Develop schematics detailing control system configuration and wiring, and design equipment panel layouts on AutoCAD software. • Technical writing - project definition and requirements, status reporting, process control sequence of operations, RFIs • Support factory/ site acceptance testing, user acceptance testing, and user training REQUIRED/ HIGHLY PREFERRED EXPERIENCE • BSEE or similar • PLCs, HMIs, SCADA systems, and field instrumentation. • Ladder logic, structured text, or function block diagram. • Control system software platforms (e.g., Rockwell/ Allen-Bradley, Siemens, Schneider) and relevant programming environments. • Electrical schematics, Power Distribution, Control panels, P&IDs (Piping and Instrumentation Diagrams), and process control narratives, NEC Code. • Implementing/ testing/ commissioning/ qualifying automation solutions

We have a Controls Engineer position available in our Albuquerque, NM office. This person will provide team leadership in delivering automation systems for a wide variety of industries. This position requires demonstrated technical proficiency in implementing automation solutions with PLC, DCS, HMI, and SCADA platforms. The Senior Controls Engineer will interact directly with the customer and lead a team of Wunderlich-Malec engineers in identifying requirements, developing specifications, and implementing/testing/commissioning/qualifying automation solutions. This position is a leadership role within the business unit and requires strong problem-solving ability, well-balanced people skills, an aptitude for business efficiency, and an interest in creating partnerships. The Senior Controls Engineer demonstrates success by securing repeat work with both new and existing customers. RESPONSIBILITIES: This position requires the ability to deliver innovative automation solutions and design standards either self-directedly or as a leader of a team. The candidate must have the ability to conceptualize, detail, and implement control systems for industrial processes and machinery that meet our customers requirements. This involves the development of a control system architecture, selecting the components to be used, detailing schematic diagrams and system documentation, programming controllers (PLC, DCS, RTU), programming the process visualization (HMI/SCADA), developing databases for archiving/displaying historical system data and implementing/commissioning the control system at the clients facility. Knowledge of controller programming languages such as Ladder, Sequential Function Chart, Structured Text, and others to achieve the desired results is required. Also having knowledge of standard programming languages such as VBA, .NET, and SQL for the development of HMI/SCADA systems is preferred For larger systems, experience with industrial networking used to connect control system components and instrumentation is preferred. The Controls Engineer would design, detail, and implement a variety of fiber, wired, and wireless systems using industrial protocols (Ethernet/IP, Profinet, Modbus, etc.) This position oftentimes requires the following project management responsibilities: developing project execution plans, work breakdown structures and associated budgets, task prioritization and scheduling, task ordering, time tracking and reporting, financial tracking and reporting, early problem identification, conflict management/resolution, leading and supporting a team, and attending project status meetings. Also includes overseeing daily operations and activities of a project(s) up to $1M. This position is often responsible for ensuring the overall profitability of the project The ideal candidate must have a diverse engineering skillset with the ability to work independently. Will act as technical lead on projects and guide lower-level engineers and technicians. Could also act as Project Manager on smaller projects. QUALIFICATIONS: Education Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science is required. Experience 10+ years of Controls Engineer experience with capabilities in below areas: Candidates with Rockwell and Cimplicity experience will be given preference Various 3rd party web-based data integrations for monitoring and troubleshooting aid Develop work processes to automate template and instance development within the System Platform Provide technical leadership on design standards around graphics, alarming, and scale-up SQL, .NET, Power BI, Grafana, and APIs In-depth understanding of PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon In-depth understanding of HMI/SCADA hardware/software platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and Siemens In-depth understanding of DCS hardware/software platforms such as Emerson DeltaV or similar Experience in industries such as Semiconductor chip fabrication facilities, Life Sciences, Building Automation, Food and Beverage, Oil & Gas and Mining Experience in the design of electrical schematics, including power distribution under 480VAC, control panels, and associated NEC references desired Experience with AutoCAD is desired Experience leading a team of engineers/technicians to provide control system solutions Experience mentoring less experienced engineers Professional references, preferably one from each of the following: a subordinate, a peer, and a manager Field device/equipment troubleshooting Job estimating

Senior Controls Engineer - Albuquerque Albuquerque, NM Must be a US Citizen or Green Card holder. We have a Controls Engineer position available in our Albuquerque, NM office. This person will provide team leadership in delivering automation systems for a wide variety of industries. This position requires demonstrated technical proficiency in implementing automation solutions with PLC, DCS, HMI, and SCADA platforms. The Senior Controls Engineer will interact directly with the customer and lead a team of Wunderlich-Malec engineers in identifying requirements, developing specifications, and implementing/testing/commissioning/qualifying automation solutions. This position is a leadership role within the business unit and requires strong problem-solving ability, well-balanced people skills, an aptitude for business efficiency, and an interest in creating partnerships. The Senior Controls Engineer demonstrates success by securing repeat work with both new and existing customers. RESPONSIBILITIES: This position requires the ability to deliver innovative automation solutions and design standards either self-directedly or as a leader of a team. The candidate must have the ability to conceptualize, detail, and implement control systems for industrial processes and machinery that meet our customers requirements. This involves the development of a control system architecture, selecting the components to be used, detailing schematic diagrams and system documentation, programming controllers (PLC, DCS, RTU), programming the process visualization (HMI/SCADA), developing databases for archiving/displaying historical system data and implementing/commissioning the control system at the clients facility. Knowledge of controller programming languages such as Ladder, Sequential Function Chart, Structured Text, and others to achieve the desired results is required. Also having knowledge of standard programming languages such as VBA, .NET, and SQL for the development of HMI/SCADA systems is preferred For larger systems, experience with industrial networking used to connect control system components and instrumentation is preferred. The Controls Engineer would design, detail, and implement a variety of fiber, wired, and wireless systems using industrial protocols (Ethernet/IP, Profinet, Modbus, etc.) This position oftentimes requires the following project management responsibilities: developing project execution plans, work breakdown structures and associated budgets, task prioritization and scheduling, task ordering, time tracking and reporting, financial tracking and reporting, early problem identification, conflict management/resolution, leading and supporting a team, and attending project status meetings. Also includes overseeing daily operations and activities of a project(s) up to $1M. This position is often responsible for ensuring the overall profitability of the project The ideal candidate must have a diverse engineering skillset with the ability to work independently. Will act as technical lead on projects and guide lower-level engineers and technicians. Could also act as Project Manager on smaller projects. QUALIFICATIONS: Education Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science is required. Experience 10+ years of Controls Engineer experience with capabilities in below areas: Candidates with Rockwell and Cimplicity experience will be given preference Various 3rd party web-based data integrations for monitoring and troubleshooting aid Develop work processes to automate template and instance development within the System Platform Provide technical leadership on design standards around graphics, alarming, and scale-up SQL, .NET, Power BI, Grafana, and APIs In-depth understanding of PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon In-depth understanding of HMI/SCADA hardware/software platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and Siemens In-depth understanding of DCS hardware/software platforms such as Emerson DeltaV or similar Experience in industries such as Semiconductor chip fabrication facilities, Life Sciences, Building Automation, Food and Beverage, Oil & Gas and Mining Experience in the design of electrical schematics, including power distribution under 480VAC, control panels, and associated NEC references desired Experience with AutoCAD is desired Experience leading a team of engineers/technicians to provide control system solutions Experience mentoring less experienced engineers Professional references, preferably one from each of the following: a subordinate, a peer, and a manager Field device/equipment troubleshooting Job estimating Physical Demands of Position: Seeing, color perception, hearing, clear speech, dexterity in hands, driving, lifting, ability to mount/dismount equipment, pushing and pulling. Working Environment: Standard office environment, on-site office environment, diverse industrial environments, frequent use of personal computer, facsimile/copy machines, phones. Required Knowledge, Skills, and Abilities: (Hiring Companies ATS Questions): 1. Do you have a Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science is required. 2. Do you have 10+ years of Controls Engineer experience 3. Do you have experience with Controller programming languages such as Ladder, Sequential Function Chart, Structured Text, and others to achieve the desired results 4. Do you have experience with Standard programming languages such as VBA, .NET, and SQL for the development of HMI/SCADA systems 5. Do you have experience with SQL, .NET, Power BI, Grafana, and APIs 6. Do you have experience with PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon 7. Do you have experience with HMI/SCADA hardware/software platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and Siemens 8. Do you have experience with DCS hardware/software platforms such as Emerson DeltaV or similar 9. Do you have experience with Experience in industries such as Semiconductor chip fabrication facilities, Life Sciences, Building Automation, Food and Beverage, Oil & Gas and Mining 10. Do you have experience with Experience in the design of electrical schematics, including power distribution under 480VAC, control panels, and associated NEC references 11. Do you have experience with Field device/equipment troubleshooting 12. Must either be local or have ties to the area 13. Do you have experience with AutoCAD - Nice to have: 14. Do you have experience with For larger systems, experience with industrial networking used to connect control system components and instrumentation - Nice to have: 15. Must be a US Citizen or Green Card holder

Full-time Senior Controls Engineer needed in Albuquerque, NM. This is an on-site position only. NO VISOR SPONSORSHIP offered. Position offers a competitive salary and robust recruitment package. 10 years of experience required. Skills: Controls Engineer, Automation Systems, PLC, DCS, HMI, SCADA, RTU, Ladder, Sequential Function Chart, Structured Text, VBA, .NET, SQL, Fiber, Wired, Wireless Systems, Ethernet, IP, Profinet, Modbus, Networking, Project Management, Rockwell, Cimplicity, Power BI, Grafana, APIs, Rockwell Automation, Siemens, Modicon, HMI/SCADA, ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Semiconductor chip fabrication facilities, Life Sciences, Building AutomationFood and Beve,

We have a Controls Engineer position available in our Albuquerque, NM office. This person will provide team leadership in delivering automation systems for a wide variety of industries. This position requires demonstrated technical proficiency in implementing automation solutions with PLC, DCS, HMI, and SCADA platforms. The Senior Controls Engineer will interact directly with the customer and lead a team of engineers in identifying requirements, developing specifications, and implementing/testing/commissioning/qualifying automation solutions. This position is a leadership role within the business unit and requires strong problem-solving ability, well-balanced people skills, an aptitude for business efficiency, and an interest in creating partnerships. The Senior Controls Engineer demonstrates success by securing repeat work with both new and existing customers. RESPONSIBILITIES: This position requires the ability to deliver innovative automation solutions and design standards either self-directedly or as a leader of a team. The candidate must have the ability to conceptualize, detail, and implement control systems for industrial processes and machinery that meet our customer's requirements. This involves the development of a control system architecture, selecting the components to be used, detailing schematic diagrams and system documentation, programming controllers (PLC, DCS, RTU), programming the process visualization (HMI/SCADA), developing databases for archiving/displaying historical system data and implementing/commissioning the control system at the client's facility. Knowledge of controller programming languages such as Ladder, Sequential Function Chart, Structured Text, and others to achieve the desired results is required. Also having knowledge of standard programming languages such as VBA, .NET, and SQL for the development of HMI/SCADA systems is preferred For larger systems, experience with industrial networking used to connect control system components and instrumentation is preferred. The Controls Engineer would design, detail, and implement a variety of fiber, wired, and wireless systems using industrial protocols (Ethernet/IP, Profinet, Modbus, etc.) This position oftentimes requires the following project management responsibilities: developing project execution plans, work breakdown structures and associated budgets, task prioritization and scheduling, task ordering, time tracking and reporting, financial tracking and reporting, early problem identification, conflict management/resolution, leading and supporting a team, and attending project status meetings. Also includes overseeing daily operations and activities of a project(s) up to $1M. This position is often responsible for ensuring the overall profitability of the project The ideal candidate must have a diverse engineering skillset with the ability to work independently. Will act as technical lead on projects and guide lower-level engineers and technicians. Could also act as Project Manager on smaller projects. QUALIFICATIONS: Education - Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science is required. Experience - 10+ years of Controls Engineer experience with capabilities in below areas: Candidates with Rockwell and Cimplicity experience will be given preference Various 3rd party web-based data integrations for monitoring and troubleshooting aid Develop work processes to automate template and instance development within the System Platform Provide technical leadership on design standards around graphics, alarming, and scale-up SQL, .NET, Power BI, Grafana, and APIs In-depth understanding of PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon In-depth understanding of HMI/SCADA hardware/software platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and Siemens In-depth understanding of DCS hardware/software platforms such as Emerson DeltaV or similar Experience in industries such as Semiconductor chip fabrication facilities, Life Sciences, Building Automation, Food and Beverage, Oil & Gas and Mining Experience in the design of electrical schematics, including power distribution under 480VAC, control panels, and associated NEC references desired Experience with AutoCAD is desired Experience leading a team of engineers/technicians to provide control system solutions Experience mentoring less experienced engineers Professional references, preferably one from each of the following: a subordinate, a peer, and a manager Field device/equipment troubleshooting Job estimating Physical Demands of Position: Seeing, color perception, hearing, clear speech, dexterity in hands, driving, lifting, ability to mount/dismount equipment, pushing and pulling. Working Environment: Standard office environment, on-site office environment, diverse industrial environments, frequent use of personal computer, facsimile/copy machines, phones.

Job Description Senior Controls Engineer - Albuquerque, NM (onsite) We have a Controls Engineer position available in our Albuquerque, NM office. This person will provide team leadership in delivering automation systems for a wide variety of industries. This position requires demonstrated technical proficiency in implementing automation solutions with PLC, DCS, HMI, and SCADA platforms. The Senior Controls Engineer will interact directly with the customer and lead a team of engineers in identifying requirements, developing specifications, and implementing/testing/commissioning/qualifying automation solutions. Why work for us? We are a 100% Employee-Owned Company. We offer a comprehensive employee-owner benefit package. Our people are passionate about solving your unique engineering challenges, and with the support of industry experts behind them, they can successfully execute projects of any size while meeting your requirements of scope, schedule, and budget. Must have: Education - Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science is required. Experience - 10+ years of Controls Engineer experience Controls Engineer would design, detail, and implement a variety of fiber, wired, and wireless systems using industrial protocols (Ethernet/IP, Profinet, Modbus, etc.) Controller programming languages such as Ladder, Sequential Function Chart, Structured Text, and others to achieve the desired results Standard programming languages such as VBA, .NET, and SQL for the development of HMI/SCADA systems Provide technical leadership on design standards around graphics, alarming, and scale-up SQL, .NET, Power BI, Grafana, and APIs PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon HMI/SCADA hardware/software platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and Siemens DCS hardware/software platforms such as Emerson DeltaV or similar would be a big plus Experience in industries such as Semiconductor chip fabrication facilities, Life Sciences, Building Automation, Food and Beverage, Oil & Gas and Mining, Water/Wastewater Experience in the design of electrical schematics, including power distribution under 480VAC, control panels, and associated NEC references Field device/equipment troubleshooting Job estimating Must either be local or have ties to the area

JOB DESCRIPTION:We have a Controls Engineer position available in our Albuquerque, NM office. This person will provide team leadership in delivering automation systems for a wide variety of industries. This position requires demonstrated technical proficiency in implementing automation solutions with PLC, DCS, HMI, and SCADA platforms. The Senior Controls Engineer will interact directly with the customer and lead a team of Wunderlich-Malec engineers in identifying requirements, developing specifications, and implementing/testing/commissioning/qualifying automation solutions. This position is a leadership role within the business unit and requires strong problem-solving ability, well-balanced people skills, an aptitude for business efficiency, and an interest in creating partnerships. The Senior Controls Engineer demonstrates success by securing repeat work with both new and existing customers. RESPONSIBILITIES:This position requires the ability to deliver innovative automation solutions and design standards either self-directedly or as a leader of a team. The candidate must have the ability to conceptualize, detail, and implement control systems for industrial processes and machinery that meet our customer's requirements. This involves the development of a control system architecture, selecting the components to be used, detailing schematic diagrams and system documentation, programming controllers (PLC, DCS, RTU), programming the process visualization (HMI/SCADA), developing databases for archiving/displaying historical system data and implementing/commissioning the control system at the client's facility. Knowledge of controller programming languages such as Ladder, Sequential Function Chart, Structured Text, and others to achieve the desired results is required. Also having knowledge of standard programming languages such as VBA, . NET, and SQL for the development of HMI/SCADA systems is preferred For larger systems, experience with industrial networking used to connect control system components and instrumentation is preferred. The Controls Engineer would design, detail, and implement a variety of fiber, wired, and wireless systems using industrial protocols (Ethernet/IP, Profinet, Modbus, etc. ) This position oftentimes requires the following project management responsibilities: developing project execution plans, work breakdown structures and associated budgets, task prioritization and scheduling, task ordering, time tracking and reporting, financial tracking and reporting, early problem identification, conflict management/resolution, leading and supporting a team, and attending project status meetings. Also includes overseeing daily operations and activities of a project(s) up to $1M. This position is often responsible for ensuring the overall profitability of the project The ideal candidate must have a diverse engineering skillset with the ability to work independently. Will act as technical lead on projects and guide lower-level engineers and technicians. Could also act as Project Manager on smaller projects. QUALIFICATIONS:Education - Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science is required. Experience - 10+ years of Controls Engineer experience with capabilities in below areas:Candidates with Rockwell and Cimplicity experience will be given preference Various 3rd party web-based data integrations for monitoring and troubleshooting aid Develop work processes to automate template and instance development within the System PlatformProvide technical leadership on design standards around graphics, alarming, and scale-up SQL, . NET, Power BI, Grafana, and APIsIn-depth understanding of PLC hardware/software platforms such as Rockwell Automation, Siemens, and ModiconIn-depth understanding of HMI/SCADA hardware/software platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and SiemensIn-depth understanding of DCS hardware/software platforms such as Emerson DeltaV or similar Experience in industries such as Semiconductor chip fabrication facilities, Life Sciences, Building Automation, Food and Beverage, Oil & Gas and MiningExperience in the design of electrical schematics, including power distribution under 480VAC, control panels, and associated NEC references desired Experience with AutoCAD is desired Experience leading a team of engineers/technicians to provide control system solutions Experience mentoring less experienced engineers Professional references, preferably one from each of the following: a subordinate, a peer, and a manager Field device/equipment troubleshooting Job estimating Physical Demands of Position:Seeing, color perception, hearing, clear speech, dexterity in hands, driving, lifting, ability to mount/dismount equipment, pushing and pulling. Working Environment:Standard office environment, on-site office environment, diverse industrial environments, frequent use of personal computer, facsimile/copy machines, phones.

Industry: Industrial Automation Job Function: Engineering Experience Level: Mid-Senior (10+ Years) Education: Bachelors Degree in Electrical, Controls, Mechanical, Chemical Engineering, or Computer Science Relocation Assistance: Not Offered Visa Sponsorship: Not Available Position Summary A leading engineering and automation firm is seeking a Senior Controls Engineer to lead the delivery of advanced automation systems across various industries. This position involves hands-on technical work with PLC, DCS, HMI, and SCADA platforms, and includes leadership responsibilities such as mentoring, project oversight, and direct client engagement. Key Responsibilities Lead the design and implementation of control systems for industrial processes and equipment. Develop control architectures, electrical schematics, and system documentation. Program controllers (PLC/DCS/RTU) and HMIs/SCADA systems. Integrate databases for historical data display and analysis. Execute system commissioning, testing, and client handoff. Design and implement industrial network systems (Ethernet/IP, Profinet, Modbus). Serve as project lead, managing budgets, timelines, deliverables, and team resources (projects up to $1M). Mentor junior engineers and oversee technical performance on assigned projects. Required Experience 10+ years in controls engineering roles. Proficient in PLC platforms such as Rockwell, Siemens, and Modicon. Skilled in HMI/SCADA systems: Wonderware System Platform, GE Cimplicity, iFIX, ICONICS, FactoryTalk View, and others. Experience with DCS platforms such as Emerson DeltaV or equivalent. Familiarity with programming languages: Ladder Logic, Structured Text, Sequential Function Charts. Working knowledge of SQL, .NET, and modern visualization/reporting tools preferred. Expertise in control panel design, NEC compliance, and AutoCAD. Industry exposure in: semiconductor, life sciences, food & beverage, building automation, oil & gas, or mining. Demonstrated success leading project teams and mentoring engineering staff. Preferred Skills Rockwell and Cimplicity platform experience. Web-based data integration and monitoring tools (e.g., Grafana, Power BI). Development of standards for graphics, alarming, and control templates. Strong client-facing communication and proposal development experience. Other Details Standard office and on-site industrial environments. May involve travel to client facilities and occasional hands-on commissioning. Requires physical activity typical of on-site engineering roles (e.g., lifting, mounting/dismounting equipment).

We have a Senior Controls Engineer position available in Albuquerque, NM. This role provides leadership in delivering automation systems for a variety of industries. The position requires technical proficiency with PLC, DCS, HMI, and SCADA platforms and includes customer interaction, team leadership, system design, programming, and commissioning of control systems. Responsibilities Lead the design, implementation, and commissioning of industrial automation systems, including PLC, DCS, HMI, and SCADA solutions Develop control system architecture, component selection, schematic diagrams, and system documentation Program controllers using Ladder, Sequential Function Chart, Structured Text, and other languages Develop process visualization (HMI/SCADA), databases, and historical data reporting systems Design, detail, and implement fiber, wired, and wireless industrial networks using protocols such as Ethernet/IP, Profinet, and Modbus Provide technical leadership on standards for graphics, alarming, and scale-up Lead and mentor lower-level engineers and technicians; act as technical lead or Project Manager on smaller projects Troubleshoot field devices, equipment, and automation systems Participate in project management activities, including scheduling, budgeting, reporting, and ensuring project profitability Required Qualifications Bachelor of Science degree in Electrical, Control, Mechanical, Chemical Engineering, or Computer Science 10+ years of Controls Engineer experience Proficiency with PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon Proficiency with HMI/SCADA platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and Siemens Knowledge of DCS platforms such as Emerson DeltaV is a plus Experience with industrial networks, fiber/wired/wireless systems, and industrial protocols (Ethernet/IP, Profinet, Modbus) Programming skills in Ladder, Sequential Function Chart, Structured Text, VBA, .NET, and SQL Experience with Power BI, Grafana, and API integration Experience designing electrical schematics, power distribution (480VAC), and control panels with NEC compliance Field device/equipment troubleshooting and job estimating experience Must be local to Albuquerque, NM or have established ties to the area Nice to Have AutoCAD experience Experience with large industrial networks connecting control system components and instrumentation Additional Information Location: Albuquerque, NM (onsite) Work Model: Primarily onsite with leadership responsibilities and travel as required Apply Today If you are a Controls Engineer with deep technical expertise, leadership experience, and Albuquerque residency, we encourage you to apply for this senior role to lead automation projects across multiple industries.

Senior Controls Engineer Albuquerque, NM If you post this job on a job board, please do not use company name or salary. Experience level: Mid-senior Experience required: 10 Years Education level: Bachelors degree Job function: Engineering Industry: Industrial Automation Compensation: View salary Total position: 1 Relocation assistance: No Visa sponsorship eligibility: No JOB DESCRIPTION: We have a Controls Engineer position available in our Albuquerque, NM office. This person will provide team leadership in delivering automation systems for a wide variety of industries. This position requires demonstrated technical proficiency in implementing automation solutions with PLC, DCS, HMI, and SCADA platforms. The Senior Controls Engineer will interact directly with the customer and lead a team of Wunderlich-Malec engineers in identifying requirements, developing specifications, and implementing/testing/commissioning/qualifying automation solutions. This position is a leadership role within the business unit and requires strong problem-solving ability, well-balanced people skills, an aptitude for business efficiency, and an interest in creating partnerships. The Senior Controls Engineer demonstrates success by securing repeat work with both new and existing customers. RESPONSIBILITIES: This position requires the ability to deliver innovative automation solutions and design standards either self-directedly or as a leader of a team. The candidate must have the ability to conceptualize, detail, and implement control systems for industrial processes and machinery that meet our customers requirements. This involves the development of a control system architecture, selecting the components to be used, detailing schematic diagrams and system documentation, programming controllers (PLC, DCS, RTU), programming the process visualization (HMI/SCADA), developing databases for archiving/displaying historical system data and implementing/commissioning the control system at the clients facility. Knowledge of controller programming languages such as Ladder, Sequential Function Chart, Structured Text, and others to achieve the desired results is required. Also having knowledge of standard programming languages such as VBA, .NET, and SQL for the development of HMI/SCADA systems is preferred For larger systems, experience with industrial networking used to connect control system components and instrumentation is preferred. The Controls Engineer would design, detail, and implement a variety of fiber, wired, and wireless systems using industrial protocols (Ethernet/IP, Profinet, Modbus, etc.) This position oftentimes requires the following project management responsibilities: developing project execution plans, work breakdown structures and associated budgets, task prioritization and scheduling, task ordering, time tracking and reporting, financial tracking and reporting, early problem identification, conflict management/resolution, leading and supporting a team, and attending project status meetings. Also includes overseeing daily operations and activities of a project(s) up to $1M. This position is often responsible for ensuring the overall profitability of the project The ideal candidate must have a diverse engineering skillset with the ability to work independently. Will act as technical lead on projects and guide lower-level engineers and technicians. Could also act as Project Manager on smaller projects. QUALIFICATIONS: Education Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science is required. Experience 10+ years of Controls Engineer experience with capabilities in below areas: Candidates with Rockwell and Cimplicity experience will be given preference Various 3rd party web-based data integrations for monitoring and troubleshooting aid Develop work processes to automate template and instance development within the System Platform Provide technical leadership on design standards around graphics, alarming, and scale-up SQL, .NET, Power BI, Grafana, and APIs In-depth understanding of PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon In-depth understanding of HMI/SCADA hardware/software platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and Siemens In-depth understanding of DCS hardware/software platforms such as Emerson DeltaV or similar Experience in industries such as Semiconductor chip fabrication facilities, Life Sciences, Building Automation, Food and Beverage, Oil & Gas and Mining Experience in the design of electrical schematics, including power distribution under 480VAC, control panels, and associated NEC references desired Experience with AutoCAD is desired Experience leading a team of engineers/technicians to provide control system solutions Experience mentoring less experienced engineers Professional references, preferably one from each of the following: a subordinate, a peer, and a manager Field device/equipment troubleshooting Job estimating Physical Demands of Position: Seeing, color perception, hearing, clear speech, dexterity in hands, driving, lifting, ability to mount/dismount equipment, pushing and pulling. Working Environment: Standard office environment, on-site office environment, diverse industrial environments, frequent use of personal computer, facsimile/copy machines, phones. About Wunderlich-Malec: As a 100% Employee-Owned Company our people are passionate about solving your unique engineering challenges, and with the support of industry experts behind them, they can successfully execute projects of any size while meeting your requirements of scope, schedule, and budget. Wunderlich-Malec has been providing customers with engineering, system integration and fabrication solutions for more than 40 years. With offices throughout the US and over 500 professionals on our staff, we are one of the largest and most well-established engineering companies in the United States, and we've successfully finished numerous projects for our US clients in many parts of the world. We're confident that our qualified staff has the knowledge, experience, and talent to create and deliver the solutions you need for your facility process and operation needs. Wunderlich-Malec ranks on Inc. 5000's Fastest-Growing Private Companies list and is a GSA Schedule holder with the Federal Government for professional engineering services and manufacturing.

We have a Controls Engineer position available in our Albuquerque, NM office. This person will provide team leadership in delivering automation systems for a wide variety of industries. This position requires demonstrated technical proficiency in implementing automation solutions with PLC, DCS, HMI, and SCADA platforms. The Senior Controls Engineer will interact directly with the customer and lead a team of Wunderlich-Malec engineers in identifying requirements, developing specifications, and implementing/testing/commissioning/qualifying automation solutions. This position is a leadership role within the business unit and requires strong problem-solving ability, well-balanced people skills, an aptitude for business efficiency, and an interest in creating partnerships. The Senior Controls Engineer demonstrates success by securing repeat work with both new and existing customers. RESPONSIBILITIES: This position requires the ability to deliver innovative automation solutions and design standards either self-directedly or as a leader of a team. The candidate must have the ability to conceptualize, detail, and implement control systems for industrial processes and machinery that meet our customers requirements. This involves the development of a control system architecture, selecting the components to be used, detailing schematic diagrams and system documentation, programming controllers (PLC, DCS, RTU), programming the process visualization (HMI/SCADA), developing databases for archiving/displaying historical system data and implementing/commissioning the control system at the clients facility. Knowledge of controller programming languages such as Ladder, Sequential Function Chart, Structured Text, and others to achieve the desired results is required. Also having knowledge of standard programming languages such as VBA, .NET, and SQL for the development of HMI/SCADA systems is preferred For larger systems, experience with industrial networking used to connect control system components and instrumentation is preferred. The Controls Engineer would design, detail, and implement a variety of fiber, wired, and wireless systems using industrial protocols (Ethernet/IP, Profinet, Modbus, etc.) This position oftentimes requires the following project management responsibilities: developing project execution plans, work breakdown structures and associated budgets, task prioritization and scheduling, task ordering, time tracking and reporting, financial tracking and reporting, early problem identification, conflict management/resolution, leading and supporting a team, and attending project status meetings. Also includes overseeing daily operations and activities of a project(s) up to $1M. This position is often responsible for ensuring the overall profitability of the project The ideal candidate must have a diverse engineering skillset with the ability to work independently. Will act as technical lead on projects and guide lower-level engineers and technicians. Could also act as Project Manager on smaller projects. QUALIFICATIONS: Education Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science is required. Experience 10+ years of Controls Engineer experience with capabilities in below areas: Candidates with Rockwell and Cimplicity experience will be given preference Various 3rd party web-based data integrations for monitoring and troubleshooting aid Develop work processes to automate template and instance development within the System Platform Provide technical leadership on design standards around graphics, alarming, and scale-up SQL, .NET, Power BI, Grafana, and APIs In-depth understanding of PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon In-depth understanding of HMI/SCADA hardware/software platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and Siemens In-depth understanding of DCS hardware/software platforms such as Emerson DeltaV or similar Experience in industries such as Semiconductor chip fabrication facilities, Life Sciences, Building Automation, Food and Beverage, Oil & Gas and Mining Experience in the design of electrical schematics, including power distribution under 480VAC, control panels, and associated NEC references desired Experience with AutoCAD is desired Experience leading a team of engineers/technicians to provide control system solutions Experience mentoring less experienced engineers Professional references, preferably one from each of the following: a subordinate, a peer, and a manager Field device/equipment troubleshooting Job estimating Physical Demands of Position: Seeing, color perception, hearing, clear speech, dexterity in hands, driving, lifting, ability to mount/dismount equipment, pushing and pulling. Working Environment: Standard office environment, on-site office environment, diverse industrial environments, frequent use of personal computer, facsimile/copy machines, phones. About Wunderlich-Malec: As a 100% Employee-Owned Company our people are passionate about solving your unique engineering challenges, and with the support of industry experts behind them, they can successfully execute projects of any size while meeting your requirements of scope, schedule, and budget. Wunderlich-Malec has been providing customers with engineering, system integration and fabrication solutions for more than 40 years. With offices throughout the US and over 500 professionals on our staff, we are one of the largest and most well-established engineering companies in the United States, and we've successfully finished numerous projects for our US clients in many parts of the world. We're confident that our qualified staff has the knowledge, experience, and talent to create and deliver the solutions you need for your facility process and operation needs. Wunderlich-Malec ranks on Inc. 5000's Fastest-Growing Private Companies list and is a GSA Schedule holder with the Federal Government for professional engineering services and manufacturing. Working Place: Albuquerque, New Mexico, United States

Wunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is: 100% employee-owned with 40+ years of industry history A Top 5 Systems Integrator Giant ENR Top 500 Firm We have a Senior Electrical Engineer position available in Albuquerque, NM. This person will interact directly with the customers and Wunderlich-Malec engineers and drafters in identifying requirements, developing specifications, and implementing/testing/commissioning/qualifying electrical solutions. The engineer researches systems ideas and draws up plans for power and control at 480 VAC and below, including instrumentation and control devices. Please Note: This role isn't scheduled to sponsor a work visa, candidates requiring a work visa sponsorship are unable to be considered for this role. The engineer is responsible for reviewing and developing system specifications and drawing packages. The engineer conducts factory tests as needed. In addition, they provide support throughout the construction and commissioning of the electrical and control systems they have designed including installation and wiring, check-out support, and commissioning/qualification. As a Senior Engineer, they may be required to manage a team of engineers to meet overall schedule requirements. They will be responsible for overall quality. During proposal phases, they should be experienced with developing a scope of work and cost estimate of hours for the deliverables. They will Project Manage jobs of various sizes. Ideally, the candidate is also interested and experienced with PLC or DCS programming, HMI/SCADA programming, network design, and/or IT/OT equipment. Major Responsibilities Responsible for 480 VAC designs and drawings including motor branch circuits, power distribution and transformation, MCC design and specification, and electrical equipment specification Responsible for hazardous area design including Class I Div. 1 and Div. 2 code and design requirements Instrument specification, wiring, troubleshooting, and calibration Develops schematics detailing control system configuration and wiring, and design equipment panel layouts. This effort includes the ability to architect and specify control system designs and give work direction to technicians creating the drawings Knowledge of the NEC and associated national, state, and local code requirements Work at customer sites to perform the system checkout and start-up of electrical, instrumentation, and control systems Develop the final record system documentation and provide system training to the customer Individual will be working on electrical and control system integration projects for clients across multiple industries including life sciences Must have a diverse engineering skill set with the ability to work independently. Should be able to handle multiple projects simultaneously. May act as Technical Lead or Project Manager. This includes but not limited to: Develops scope of work and cost estimates for the deliverables Develops and executes implementation plans for the project Assigns work to meet overall project deadlines Ensures that all project team members clearly understand the scope of W-M responsibilities and deliver quality output Develop schedules for WM and customer requirements Evaluate progress on projects and details changes Responsible for all purchasing and subcontractor requirements Responsible for the development of costs and proposal of change orders to contract scope Minimum Requirements Education A Bachelor of Science degree in Electrical Engineering, Electrical/Electronics Engineering Technology or equivalent experience is required. Interest in progressing to a PE license will be supported. Experience 10 years of experience with capabilities in below areas: Preparation of electrical, instrumentation, and PLC control panel specifications for purchase of materials and equipment and/or the solicitations of labor Experience in design of electrical schematics, including power distribution 480VAC and under Experience in the installation, checkout, and commissioning of electrical, instruments, and control systems Knowledge of the NEC and associated national, state and local code requirements; includes hazardous area requirements Familiar with construction, installation, maintenance, support, documentation, and testing activities to ensure compliance with specifications, codes, and customer requirements Familiar with construction and installation standards and specifications for use by electrical contractors Document and organize projects according to established procedures using various tools including computer software such as CAD, Excel, and Visual Manufacturing Review of fabricator and external design drawings, documentation and fabrication sequence Provide cost estimates for electrical controls according to established guidelines Monitor status and ensure delivery of project deliverables within budgeted cost and schedule Experience in industries such as Life Sciences, Building Automation, Food and Beverage, Oil & Gas and Mining Strong interpersonal, verbal and written communication skills needed. Ability to communicate and work with both team members, subcontractors and clients Experience with PLC programming is preferred Experience with AutoCAD is desired Professional references, preferably one from each of the following: a subordinate, a peer, and a manager Ability to travel up to 25% Physical Demands of Position Seeing, color perception, hearing, clear speech, dexterity in hands, driving, lifting, ability to mount/dismount equipment, pushing and pulling. Working Environment Standard office environment, on-site office environment, diverse industrial environments including hazardous area classification spaces, frequent use of personal computer, facsimile/copy machines, phones. *Job Descriptions are not exhaustive lists of all skills, responsibilities, or efforts associated with a job. They reflect principal job elements essential for performing the job and evaluating performance. Wunderlich-Malec is proud to offer a comprehensive employee-owner benefit package. Full-time employees may be eligible for the following benefits: Medical • Dental • Vision • Basic and Supplemental Life and AD&D • Long Term Disability • Voluntary Short Term Disability • Healthcare & Dependent Care Flexible Spending Accounts • Health Savings Account • Paid Time Off (PTO) • Paid Holidays • Tuition Reimbursement • Referral Bonus Program • 401(k)/Profit Sharing • 100% ESOP (Employee Stock Ownership Plan) • Employee Assistance Program • Will Preparation Resources • Worldwide Travel Assistance #LI-Hybrid #LI-WM1

Automation Controls Engineer III in Albuquerque, NM Build your future at Curia, where our work has the power to save lives. Curia is a global contract development and manufacturing organization (CDMO) with over 30 years of experience partnering with pharmaceutical and biotech companies to provide life-saving treatments to patients. At Curia, we are on a mission to advance our customers' therapies from curiosity to cure and ultimately to improve patients' lives. We proudly offer * Generous benefit options (eligible first day of employment) * Paid training, vacation and holidays (vacation accrual begins on first day of employment) * Career advancement opportunities * Education reimbursement * 401K program with matching contributions * Learning platform * And more! Summary: The Automation Controls Engineer III serves as a senior technical resource, leading the maintenance, optimization, and strategic enhancement of control and data acquisition systems for manufacturing, packaging, and support equipment at the site. This includes Supervisory Control and Data Acquisition (SCADA) systems, Programmable Logic Controllers (PLC), and Human Machine Interface (HMI) devices. In addition to providing expert technical review and counsel, this role drives complex troubleshooting efforts, mentors junior engineers, and leads initiatives to improve efficiency, reliability, and lifecycle management. The Engineer III also evaluates and implements advanced automation technologies, ensuring alignment with site objectives, industry best practices, and long-term business goals. Essential Duties and Responsibilities: * Serve as a senior technical resource for the maintenance, optimization, and strategic enhancement of automation and data acquisition systems, including SCADA, PLC, and HMI devices, across manufacturing, packaging, and support operations. * Define, prioritize, and achieve complex technical goals and objectives; lead cross-functional collaboration with internal teams, external contractors, and technology vendors to ensure timely and effective project execution. * Schedule, oversee, and evaluate the work of external trade and technology partners for automation-related equipment, facilities, and utilities, ensuring adherence to quality, safety, and GMP standards. * Lead investigations into quality deviations related to automated equipment, driving root cause analysis, corrective actions, and long-term reliability improvements. * Initiate, draft, and lead change requests and engineering documentation for automated systems, including SOPs, PMs, and technical manuals, ensuring compliance with site and regulatory requirements. * Provide advanced programming and integration support for building monitoring systems, HMI displays, and other automation platforms; maintain up-to-date engineering drawings, system documentation, and software licenses. * Identify, propose, and implement cost-effective automation upgrades and modifications to existing or new production equipment, ensuring strategic alignment with site automation goals and business objectives. * Lead complex projects with minimal oversight, balancing quality, validation, production, and regulatory considerations in all decision-making. * Mentor and provide technical guidance to junior engineers and technicians, fostering skill development and knowledge sharing. * Support Validation and Computer Systems Validation activities to ensure compliance with industry standards and regulatory expectations. * Continuously evaluate and recommend emerging automation technologies to improve efficiency, reliability, and lifecycle management of systems. * Read/interpret SOPs to ensure compliance * Maintain up to date trainings * Other duties as assigned Education and Experience: * Bachelor's Degree in Electrical or related engineering * Minimum of five (5) years' experience in automation integration * PLC and HMI experience (i.e., Rockwell, Allen Bradley, Siemens, and Simatic) Supervisory Responsibilities: This role does not have supervisory responsibilities, yet it may involve mentoring, guiding, and advising. Language Skills: The ideal candidate should have the ability to read and interpret various documents. These documents include safety instructions, standard operating procedures, technical procedures, and governmental regulations. Additionally, the candidate should possess strong written and verbal communication skills. They should also possess effective presentation skills, enabling them to successfully present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: Proficient in executing arithmetic operations including addition, subtraction, multiplication, and division across various units of measurement, employing whole numbers, fractions, decimals, and percentages. Candidates must possess a strong grasp of algebraic and geometric principles. Reasoning Ability: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Computer Skills: The ideal candidate will possess a strong technical foundation and proven capability in effectively utilizing diverse software tools to streamline the organization's daily functions. Essential skills encompass adeptness in manufacturing and internet software, alongside proficiency in Microsoft Office tools including PowerPoint, Excel, Word, and Outlook. Other Skills and Abilities: * Provides guidance and mentorship to team members * Fosters a collaborative and positive work environment * Champions change * Promotes a safe and healthy work environment by actively identifying and addressing potential hazards, following established safety protocols, participating in safety training programs, and fostering a culture of awareness and responsibility among team members. * Demonstrates strong attention to detail * Exceptional verbal and written communication skills, with the ability to convey complex technical concepts clearly and effectively. * Strong organizational skills, capable of managing multiple projects, priorities, and deadlines in a fast-paced environment. * Proficient in reading, interpreting, and applying technical documentation, specifications, and work instructions. * Effective interpersonal skills with the adaptability to collaborate across diverse teams and achieve organizational objectives. * Demonstrated ability to present ideas and information in a clear, logical, and grammatically accurate manner. * Preferred experience in the design and implementation of building management systems and cleanroom aseptic facilities. * In-depth knowledge of applicable regulatory requirements and standards, including OSHA, EPA, FDA, JP, EU, and other relevant agencies. * Able to read and understand the point-to-point control schematics and sequence of operations * Troubleshoot and resolve complex control system issues in an emergency and corrective maintenance capacity within a production environment and upgrading existing equipment with strong technical writing and analytical communication skills. Other Qualifications: * Must pass a background check * Must pass a drug screen * May be required to pass Occupational Health Screening * May be required to obtain and maintain gowning certification There may be other qualifications to add, ad hoc, such as the below: * May be required to obtain and maintain media qualification * May be required to wear a respirator Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The essential physical demands will vary for each Curia position. All positions may require regular or occasional lifting, pushing and pulling up to 10 pounds, frequently; up to 25 pounds occasionally; and up to 50 pounds infrequently. Additionally, all positions entail regular sitting, standing and reaching, with some roles requiring prolonged periods of time for each activity. Visual acuity, both close and distant, along with depth perception is necessary in each role, with or without corrective lenses. Please note that employees are prohibited from wearing contact lenses in work areas with exposure to cleaning agents. Hand and finger dexterity are integral to all positions, with specific activities varying from typing to manipulating maintenance tools or operating keypads, switches, and buttons. Occasional stooping, kneeling, twisting, crouching, crawling and balancing are also part of each position's physical requirements. Certain roles may involve climbing and working at elevated heights as well. Work Environment: The work environment characteristics, described below, are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * The working environments will vary for each Curia position. The employee may be required to work in an office, manufacturing, or warehouse environment. * The office environment is designed for comfort and productivity, with room temperature settings maintained for optimal working conditions. It is common to hear conversational noise in the background. * The pharmaceutical manufacturing environment is sterile. Therefore, aseptic gowning is required. Personal protective equipment (nitrile gloves, clean room socks, face-shields, safety glasses, aprons, steel-toed shoes and powered air purifying respirators) is necessary, depending upon the task at hand. The employee may be exposed to wet and/or humid conditions, confined areas, and refrigerator or freezer temperatures when working in a sterile environment. * The warehouse environment is typically set at a controlled temperature but the employee may be exposed to refrigerator or freezer temperatures when retrieving materials. * Some positions may occasionally be exposed to moving mechanical parts, elevated heights, airborne particles, electrical activities and vibration. In addition, some positions may work with or be exposed to, compressed gases and must wear ear protection. * All environments may be subject to working with or being exposed to cleaning agents. Education, experience, location and tenure may be considered along with internal equity when job offers are extended. We do not accept unsolicited assistance from any headhunters or recruitment firms for any of our job openings. All resumes or profiles submitted by search firms to any employee at Curia, in any form without a valid, signed search agreement by an authorized signatory in place for the specific position, approved by Talent Acquisition, will be deemed the sole property of Curia. No fee will be paid in the event the candidate is hired by Curia because of the unsolicited referral. All interested applicants must apply online. Please be aware of scammers. Curia will only send offer letters and requests for sensitive personal information from a curiaglobal.com email address. Curia is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Curia is an E-Verify employer.

Automation Controls Engineer III in Albuquerque, NM Build your future at Curia, where our work has the power to save lives. Curia is a global contract development and manufacturing organization (CDMO) with over 30 years of experience partnering with pharmaceutical and biotech companies to provide life-saving treatments to patients. At Curia, we are on a mission to advance our customers' therapies from curiosity to cure and ultimately to improve patients' lives. We proudly offer Generous benefit options (eligible first day of employment) Paid training, vacation and holidays (vacation accrual begins on first day of employment) Career advancement opportunities Education reimbursement 401K program with matching contributions Learning platform And more! Summary: The Automation Controls Engineer III serves as a senior technical resource, leading the maintenance, optimization, and strategic enhancement of control and data acquisition systems for manufacturing, packaging, and support equipment at the site. This includes Supervisory Control and Data Acquisition (SCADA) systems, Programmable Logic Controllers (PLC), and Human Machine Interface (HMI) devices. In addition to providing expert technical review and counsel, this role drives complex troubleshooting efforts, mentors junior engineers, and leads initiatives to improve efficiency, reliability, and lifecycle management. The Engineer III also evaluates and implements advanced automation technologies, ensuring alignment with site objectives, industry best practices, and long-term business goals. Essential Duties and Responsibilities: Serve as a senior technical resource for the maintenance, optimization, and strategic enhancement of automation and data acquisition systems, including SCADA, PLC, and HMI devices, across manufacturing, packaging, and support operations. Define, prioritize, and achieve complex technical goals and objectives; lead cross-functional collaboration with internal teams, external contractors, and technology vendors to ensure timely and effective project execution. Schedule, oversee, and evaluate the work of external trade and technology partners for automation-related equipment, facilities, and utilities, ensuring adherence to quality, safety, and GMP standards. Lead investigations into quality deviations related to automated equipment, driving root cause analysis, corrective actions, and long-term reliability improvements. Initiate, draft, and lead change requests and engineering documentation for automated systems, including SOPs, PMs, and technical manuals, ensuring compliance with site and regulatory requirements. Provide advanced programming and integration support for building monitoring systems, HMI displays, and other automation platforms; maintain up-to-date engineering drawings, system documentation, and software licenses. Identify, propose, and implement cost-effective automation upgrades and modifications to existing or new production equipment, ensuring strategic alignment with site automation goals and business objectives. Lead complex projects with minimal oversight, balancing quality, validation, production, and regulatory considerations in all decision-making. Mentor and provide technical guidance to junior engineers and technicians, fostering skill development and knowledge sharing. Support Validation and Computer Systems Validation activities to ensure compliance with industry standards and regulatory expectations. Continuously evaluate and recommend emerging automation technologies to improve efficiency, reliability, and lifecycle management of systems. Read/interpret SOPs to ensure compliance Maintain up to date trainings Other duties as assigned Education and Experience: Bachelor's Degree in Electrical or related engineering Minimum of five (5) years' experience in automation integration PLC and HMI experience (i.e., Rockwell, Allen Bradley, Siemens, and Simatic) Supervisory Responsibilities: This role does not have supervisory responsibilities, yet it may involve mentoring, guiding, and advising. Language Skills: The ideal candidate should have the ability to read and interpret various documents. These documents include safety instructions, standard operating procedures, technical procedures, and governmental regulations. Additionally, the candidate should possess strong written and verbal communication skills. They should also possess effective presentation skills, enabling them to successfully present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: Proficient in executing arithmetic operations including addition, subtraction, multiplication, and division across various units of measurement, employing whole numbers, fractions, decimals, and percentages. Candidates must possess a strong grasp of algebraic and geometric principles. Reasoning Ability: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Computer Skills: The ideal candidate will possess a strong technical foundation and proven capability in effectively utilizing diverse software tools to streamline the organization's daily functions. Essential skills encompass adeptness in manufacturing and internet software, alongside proficiency in Microsoft Office tools including PowerPoint, Excel, Word, and Outlook. Other Skills and Abilities: Provides guidance and mentorship to team members Fosters a collaborative and positive work environment Champions change Promotes a safe and healthy work environment by actively identifying and addressing potential hazards, following established safety protocols, participating in safety training programs, and fostering a culture of awareness and responsibility among team members. Demonstrates strong attention to detail Exceptional verbal and written communication skills, with the ability to convey complex technical concepts clearly and effectively. Strong organizational skills, capable of managing multiple projects, priorities, and deadlines in a fast-paced environment. Proficient in reading, interpreting, and applying technical documentation, specifications, and work instructions. Effective interpersonal skills with the adaptability to collaborate across diverse teams and achieve organizational objectives. Demonstrated ability to present ideas and information in a clear, logical, and grammatically accurate manner. Preferred experience in the design and implementation of building management systems and cleanroom aseptic facilities. In-depth knowledge of applicable regulatory requirements and standards, including OSHA, EPA, FDA, JP, EU, and other relevant agencies. Able to read and understand the point-to-point control schematics and sequence of operations Troubleshoot and resolve complex control system issues in an emergency and corrective maintenance capacity within a production environment and upgrading existing equipment with strong technical writing and analytical communication skills. Other Qualifications: Must pass a background check Must pass a drug screen May be required to pass Occupational Health Screening May be required to obtain and maintain gowning certification There may be other qualifications to add, ad hoc, such as the below: May be required to obtain and maintain media qualification May be required to wear a respirator Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The essential physical demands will vary for each Curia position. All positions may require regular or occasional lifting, pushing and pulling up to 10 pounds, frequently; up to 25 pounds occasionally; and up to 50 pounds infrequently. Additionally, all positions entail regular sitting, standing and reaching, with some roles requiring prolonged periods of time for each activity. Visual acuity, both close and distant, along with depth perception is necessary in each role, with or without corrective lenses. Please note that employees are prohibited from wearing contact lenses in work areas with exposure to cleaning agents. Hand and finger dexterity are integral to all positions, with specific activities varying from typing to manipulating maintenance tools or operating keypads, switches, and buttons. Occasional stooping, kneeling, twisting, crouching, crawling and balancing are also part of each position's physical requirements. Certain roles may involve climbing and working at elevated heights as well. Work Environment: The work environment characteristics, described below, are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The working environments will vary for each Curia position. The employee may be required to work in an office, manufacturing, or warehouse environment. The office environment is designed for comfort and productivity, with room temperature settings maintained for optimal working conditions. It is common to hear conversational noise in the background. The pharmaceutical manufacturing environment is sterile. Therefore, aseptic gowning is required. Personal protective equipment (nitrile gloves, clean room socks, face-shields, safety glasses, aprons, steel-toed shoes and powered air purifying respirators) is necessary, depending upon the task at hand. The employee may be exposed to wet and/or humid conditions, confined areas, and refrigerator or freezer temperatures when working in a sterile environment. The warehouse environment is typically set at a controlled temperature but the employee may be exposed to refrigerator or freezer temperatures when retrieving materials. Some positions may occasionally be exposed to moving mechanical parts, elevated heights, airborne particles, electrical activities and vibration. In addition, some positions may work with or be exposed to, compressed gases and must wear ear protection. All environments may be subject to working with or being exposed to cleaning agents. Education, experience, location and tenure may be considered along with internal equity when job offers are extended. We do not accept unsolicited assistance from any headhunters or recruitment firms for any of our job openings. All resumes or profiles submitted by search firms to any employee at Curia, in any form without a valid, signed search agreement by an authorized signatory in place for the specific position, approved by Talent Acquisition, will be deemed the sole property of Curia. No fee will be paid in the event the candidate is hired by Curia because of the unsolicited referral. All interested applicants must apply online. Please be aware of scammers. Curia will only send offer letters and requests for sensitive personal information from a curiaglobal.com email address. Curia is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Curia is an E-Verify employer.

Job Description This person will provide team leadership in delivering automation systems for a wide variety of industries. This position requires demonstrated technical proficiency in implementing automation solutions with PLC, DCS, HMI, and SCADA platforms. The Senior Controls Engineer will interact directly with the customer and lead a team of Wunderlich-Malec engineers in identifying requirements, developing specifications, and implementing/testing/commissioning/qualifying automation solutions. This position is a leadership role within the business unit and requires strong problem-solving ability, well-balanced people skills, an aptitude for business efficiency, and an interest in creating partnerships. The Senior Controls Engineer demonstrates success by securing repeat work with both new and existing customers. Requirements The ideal candidate must have a diverse engineering skillset with the ability to work independently. Will act as technical lead on projects and guide lower-level engineers and technicians. Could also act as Project Manager on smaller projects. Education - Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science is required. Experience - 10+ years of Controls Engineer experience with capabilities in below areas: Candidates with Rockwell and Cimplicity experience will be given preference Various 3rd party web-based data integrations for monitoring and troubleshooting aid Develop work processes to automate template and instance development within the System Platform Provide technical leadership on design standards around graphics, alarming, and scale-up SQL, .NET, Power BI, Grafana, and APIs In-depth understanding of PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon In-depth understanding of HMI/SCADA hardware/software platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and Siemens In-depth understanding of DCS hardware/software platforms such as Emerson DeltaV or similar Experience in industries such as Semiconductor chip fabrication facilities, Life Sciences, Building Automation, Food and Beverage, Oil & Gas and Mining Experience in the design of electrical schematics, including power distribution under 480VAC, control panels, and associated NEC references desired Experience with AutoCAD is desired Experience leading a team of engineers/technicians to provide control system solutions Experience mentoring less experienced engineers Professional references, preferably one from each of the following: a subordinate, a peer, and a manager Field device/equipment troubleshooting Job estimating

Job Title: Electronic Hardware Design EngineerJob Description This role involves the design, development, analysis, and verification of digital electronic circuits for avionics interface cards and embedded systems. You will work on FPGA-based hardware designs, digital interfaces such as PCIe, Ethernet, USB, SPI, I²C, and power regulation, sequencing, and monitoring circuits. Your duties will also include creating test plans, prototypes, and conducting engineering validation activities. Responsibilities * Perform schematic capture, component selection, and design documentation. * Support PCB layout engineers with constraints, placement, and routing guidance. * Execute hardware bring-up, debug, and signal-level testing using lab instruments. * Collaborate with the software team for API and UI implementation. * Recommend and help track corrective and preventive actions. * Follow and maintain company documentation standards and procedures. * Follow, maintain, and improve company quality processes. * Support production with root-cause analysis, Engineering Change Orders (ECOs), and component lifecycle updates. Essential Skills * At least 3 years of experience in electronic hardware design. * At least 3 years of experience in digital circuit design, including FPGAs. * Professional experience with schematic capture tools (PADS). * Professional experience using oscilloscopes, logic analyzers, multimeters, and power supplies. * Bachelor's degree in Electrical Engineering, Computer Engineering, or related field. Additional Skills & Qualifications * Experience with EMC/EMI, COTS electronics, MIL-STD-1553, ARINC-429/717. * Experience in the avionics industry is a plus. Work Environment This position is based in an office setting with a smaller, close-knit team. You will work in a cross-functional environment that offers a variety of challenges and different tasks. The company values its employees, providing excellent benefits, including two weeks of vacation for the first five years, and a week off from Christmas to New Year's. The standard work hours are from 8 am to 5 pm, five days a week, with flexibility if needed. The dress code is business casual, and jeans are acceptable. Job Type & Location This is a Contract to Hire position based out of Rio Rancho, NM. Pay and Benefits The pay range for this position is $85000.00 - $115000.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rio Rancho,NM. Application Deadline This position is anticipated to close on Jan 20, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.