Controls engineer jobs in Central Islip, NY

Job Description Protection & Control Engineer/Technician - Field Testing & Commissioning Travel-Heavy Field Role - Up to 80% Join a leading team supporting high-voltage substation projects across transmission, distribution, and generation environments. We're looking for Protection & Control Field Testing Engineers at all experience levels to perform hands-on testing, commissioning, troubleshooting, and documentation of critical P&C systems. Candidates should expect five 10-hour workdays per week. What You'll Do: Test and commission P&C systems on high-voltage substations (15 kV - 500 kV) Perform protective relay testing (SEL, GE, Basler, Beckwith) with Omicron or Doble test sets Execute CT/PT verification, relay calibration, control scheme testing, and dynamic/static testing Interpret electrical drawings, schematics, and logic diagrams; produce detailed field reports Support Project Leads/Field Supervisors and manage clerical/project documentation What You Bring: 5+ years in substation field testing (breakers, transformers, instrument transformers, P&C systems) Proficiency with relay families: SEL-311L, SEL-387, SEL-487, SEL-421, SEL-351S, GE L90/D60, etc. Experience with NETA, IEEE, NFPA, and related standards Knowledge of test software: ProTesT, Protection Suite, ENOSERV RTS, Omicron Test Universe, AcSELerator Quickset Ability to travel extensively (up to 80%) and lift 50+ lbs Preferred: Bachelor's in Electrical Engineering/Electrical Technology Electromechanical relay testing and high-voltage commissioning experience (CTs, CCVTs, PLC/SCADA, DC systems) IEC 61850 testing and commissioning experience Competitive pay and growth opportunities for skilled P&C engineers. Step into a role where every test, every relay, and every report matters.

**RWE Clean Energy, LLC** **To start as soon as possible, full time, permanent** **Functional area:** Engineering **Remuneration:** Non-Exempt The Plant Controls Team within RWE Clean Energy ensures control solutions for utility-scale renewables projects (Solar, Wind, and Battery) are designed with the highest quality for the entire life cycle - from the development phase to operation. This position executes on the design, construction, commissioning, and administration of control systems within RWE Clean Energy. In this position, you will be key in the design and execution of control solutions for new sites. You will be gathering project-specific requirements to define the services and functionalities required by the plants, determine the most suitable SCADA concept for interconnection, and ensure the right control system design for the application. In this position, you will be involved in all the different stages of the project, starting from the design stage, then guiding the implementation phase, and supporting the on-site commissioning of the solution. You will work hand-in-hand with third-party providers, assessing the most suitable options and bringing concepts into the field. As a **Sr Plant Controls Engineer I** , you will be a key interface between Operations and Development parts of the business. **Role Responsibilities:** + Lead SCADA design, configuration, and commissioning on individual projects and provide oversight and guidance to junior engineers + Coordinate with project managers and other engineering discipline SME's to ensure SCADA requirements are met and project timelines are achieved + Review and provide constructive input for project contracts with financial partners and equipment manufacturers. Advises and provides technical input for contract wording discussions + Gather technical requirements for projects based on grid codes, standards, and contracts, and ensure the SCADA system's capability to achieve these + Generate and modify project exhibits for contractors and vendors in alignment with SCADA Standards and strategy + Develops and oversees the scope of work and technical requirements for control system vendors and integrators + Reviews contractor design documents and ensures design will meet operational needs of the SCADA system and alignment with SCADA standards + Leads, oversees, and implements the development of technical SCADA Requirements, including networking design (IP addressing, VLANs), RTU configuration, and plant control strategy across multiple projects + Commissions substation equipment, switches, and plant networks for projects; working closely with junior engineers to train and build up their skillsets + Drives and pursues interpretation and understanding of operational data of Battery plants across the wider business + Assists in developing strategic goals of the SCADA team and supports driving changes to standards and processes **Job Requirements and Experiences:** + A Minimum of a bachelor's degree in Electrical Engineering, Mechatronics, Control Engineering, a similar field of engineering, or equivalent professional experience + A minimum of 5 years of professional experience in control systems and SCADA platforms (any industry) + Strong grasp of networking design fundamentals, including fiber/ethernet, switch, and VLAN configuration + Strong background in configuration of RTUs or other plant controllers (software development experience also a plus) + Has proven experience developing technical documentation, including exhibits, scope of works, functional descriptions and plant control narratives + Structured and thorough in analyzing and documenting requirements and creating technical documentation for different stakeholders + Demonstrated experience in commissioning networking and plant controls + Demonstrated experience overseeing contractors delivering technical work + Experience within renewable energy or the power industry is highly regarded, but not required + Works autonomously to deliver projects without oversight + Takes ownership of work and resolves issues; seeks guidance when direction is needed + Documents work and progress effectively + Reports upwards on project status and progress + Coordinates with technical members of adjacent teams to align on work deliverables that impact one another, seeks to understand and resolve gaps, and escalates issues through appropriate channels + Effective communicator capable of working with people from different backgrounds + High Attention to detail + Excellent interpersonal skills, energetic, and a self-starter + Proactive in resolving issues + Effectively uses team collaboration tools and software + Must be open to collaboration and working in a team environment + Clear passion and motivation to work in the renewables industry **WORK ENVIRONMENT:** This position is an office-based role with some travel and visits to other RWECE office and field locations. The employee must be able to sit, walk, or stand for long durations of time. **Pay range:** The annual base salary range for this position in Illinois and New York is $130,000 - $150,000. The listed salary range represents our good faith estimate for this position and represents the range for new hire salaries across all U.S locations. Please note that the salary information is a general guideline only. RWE considers factors such as (but not limited to) scope and responsibilities of the position, candidate's education & work experience, training & certifications, and key skills as well as market and business considerations at the time of the offer. **Benefits offered:** Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. Eligible employees also participate in short-term incentives, in addition to salary. **Apply with just a few clicks:** ad code **90733** Any questions? **Contact rwece_******************** We look forward to meeting you. Of course, you can find us on LinkedIn, Instagram, Facebook, YouTube and Xing, too. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. Through its subsidiary RWE Clean Energy, RWE is the third largest renewable energy company in the United States, with a presence in most U.S. states from coast to coast. RWE's team of about 2,000 employees in the U.S. stands ready to help meet the nation's growing energy needs. With its homegrown and fastest-to-market product, RWE supports the goal of American Energy dominance and independence. To that end, RWE Clean Energy is committed to increasing its already strong asset base of over 10 gigawatts of operating wind, solar and battery projects, focusing on providing high-quality jobs. RWE invests in local and rural communities while strengthening domestic manufacturing supporting the renaissance of American industry. This is complemented by RWE's energy trading business. RWE is also a major offtaker of American liquified natural gas (LNG). As an energy company with a successful history spanning more than 125 years, RWE has an extensive knowledge of the energy markets and an excellent expertise in all major power generation and storage technologies, from nuclear, coal and gas to hydro, batteries, wind and solar. Every project brings constantly-evolving technical, practical and social challenges - and drives a culture where everybody thrives, has fun and feels excited by each day. As the third largest renewable energy company in the U.S., you'll also have the freedom to act with conviction and courage as we pivot to new technologies - and continuously improve, together.

RWE Clean Energy, LLC To start as soon as possible, full time, permanent Functional area: Engineering Remuneration: Non-Exempt The Plant Controls Team within RWE Clean Energy ensures control solutions for utility-scale renewables projects (Solar, Wind, and Battery) are designed with the highest quality for the entire life cycle - from the development phase to operation. This position executes on the design, construction, commissioning, and administration of control systems within RWE Clean Energy. In this position, you will be key in the design and execution of control solutions for new sites. You will be gathering project-specific requirements to define the services and functionalities required by the plants, determine the most suitable SCADA concept for interconnection, and ensure the right control system design for the application. In this position, you will be involved in all the different stages of the project, starting from the design stage, then guiding the implementation phase, and supporting the on-site commissioning of the solution. You will work hand-in-hand with third-party providers, assessing the most suitable options and bringing concepts into the field. As a Sr Plant Controls Engineer I, you will be a key interface between Operations and Development parts of the business. Role Responsibilities: * Lead SCADA design, configuration, and commissioning on individual projects and provide oversight and guidance to junior engineers * Coordinate with project managers and other engineering discipline SME's to ensure SCADA requirements are met and project timelines are achieved * Review and provide constructive input for project contracts with financial partners and equipment manufacturers. Advises and provides technical input for contract wording discussions * Gather technical requirements for projects based on grid codes, standards, and contracts, and ensure the SCADA system's capability to achieve these * Generate and modify project exhibits for contractors and vendors in alignment with SCADA Standards and strategy * Develops and oversees the scope of work and technical requirements for control system vendors and integrators * Reviews contractor design documents and ensures design will meet operational needs of the SCADA system and alignment with SCADA standards * Leads, oversees, and implements the development of technical SCADA Requirements, including networking design (IP addressing, VLANs), RTU configuration, and plant control strategy across multiple projects * Commissions substation equipment, switches, and plant networks for projects; working closely with junior engineers to train and build up their skillsets * Drives and pursues interpretation and understanding of operational data of Battery plants across the wider business * Assists in developing strategic goals of the SCADA team and supports driving changes to standards and processes Job Requirements and Experiences: * A Minimum of a bachelor's degree in Electrical Engineering, Mechatronics, Control Engineering, a similar field of engineering, or equivalent professional experience * A minimum of 5 years of professional experience in control systems and SCADA platforms (any industry) * Strong grasp of networking design fundamentals, including fiber/ethernet, switch, and VLAN configuration * Strong background in configuration of RTUs or other plant controllers (software development experience also a plus) * Has proven experience developing technical documentation, including exhibits, scope of works, functional descriptions and plant control narratives * Structured and thorough in analyzing and documenting requirements and creating technical documentation for different stakeholders * Demonstrated experience in commissioning networking and plant controls * Demonstrated experience overseeing contractors delivering technical work * Experience within renewable energy or the power industry is highly regarded, but not required * Works autonomously to deliver projects without oversight * Takes ownership of work and resolves issues; seeks guidance when direction is needed * Documents work and progress effectively * Reports upwards on project status and progress * Coordinates with technical members of adjacent teams to align on work deliverables that impact one another, seeks to understand and resolve gaps, and escalates issues through appropriate channels * Effective communicator capable of working with people from different backgrounds * High Attention to detail * Excellent interpersonal skills, energetic, and a self-starter * Proactive in resolving issues * Effectively uses team collaboration tools and software * Must be open to collaboration and working in a team environment * Clear passion and motivation to work in the renewables industry WORK ENVIRONMENT: This position is an office-based role with some travel and visits to other RWECE office and field locations. The employee must be able to sit, walk, or stand for long durations of time. Pay range: The annual base salary range for this position in Illinois and New York is $130,000 - $150,000. The listed salary range represents our good faith estimate for this position and represents the range for new hire salaries across all U.S locations. Please note that the salary information is a general guideline only. RWE considers factors such as (but not limited to) scope and responsibilities of the position, candidate's education & work experience, training & certifications, and key skills as well as market and business considerations at the time of the offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. Eligible employees also participate in short-term incentives, in addition to salary. Apply with just a few clicks: ad code 90733 Any questions? Contact rwece_****************** We look forward to meeting you. Of course, you can find us on LinkedIn, Instagram, Facebook, YouTube and Xing, too. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. Through its subsidiary RWE Clean Energy, RWE is the third largest renewable energy company in the United States, with a presence in most U.S. states from coast to coast. RWE's team of about 2,000 employees in the U.S. stands ready to help meet the nation's growing energy needs. With its homegrown and fastest-to-market product, RWE supports the goal of American Energy dominance and independence. To that end, RWE Clean Energy is committed to increasing its already strong asset base of over 10 gigawatts of operating wind, solar and battery projects, focusing on providing high-quality jobs. RWE invests in local and rural communities while strengthening domestic manufacturing supporting the renaissance of American industry. This is complemented by RWE's energy trading business. RWE is also a major offtaker of American liquified natural gas (LNG). As an energy company with a successful history spanning more than 125 years, RWE has an extensive knowledge of the energy markets and an excellent expertise in all major power generation and storage technologies, from nuclear, coal and gas to hydro, batteries, wind and solar. Every project brings constantly-evolving technical, practical and social challenges - and drives a culture where everybody thrives, has fun and feels excited by each day. As the third largest renewable energy company in the U.S., you'll also have the freedom to act with conviction and courage as we pivot to new technologies - and continuously improve, together. Yes Nearest Major Market: Austin Job Segment: Nuclear Engineering, Environmental Engineering, Controls Engineer, Construction, Electrical Engineering, Engineering

We are currently hiring a Protection and Control Engineer in LaBella's Program Management Services Division at our client's office. The Program Management Services Division at LaBella provides comprehensive management services for complex projects and multi-year capital programs. Project teams are established to provide a customized mix of business consulting, project management, financial control and monitoring, administrative, and technical support services. Duties: Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don't remove required protections already in place or at least be aware of how things work today before we modify existing schemes. Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with AVANGRID TM standards Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes) Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings Review/provide input to Owner's Aspen model changes as required for individual capital projects Provide design support during implementation/testing and commissioning of the above the items Provide feedback to Owner on existing TM standards and help refine the Owner's design practices Ensure all as-built documentation gets filed appropriately in the plant filing location at Owner Lead overall automation and integration design for all capital projects Review/design SCADA point indexes Review contractor provided HMI screens/settings for all capital projects Review/design Protection settings and settings basis Review/design IED Data Maps Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.) Review automated maintenance data gathering (Digital Substation Data) point lists Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation Provide design support during implementation/testing and commissioning of the above items Perform constructability review and ensure adequate automation and integration coverage is available for each outage step (SCADA etc.) Salary Range: $75,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements 2-5 years of engineering experience in the functional area Bachelor's degree in engineering or engineering technology PE requested IEC 61850/Goose experience required Benefits Body, mind, and wallet-LaBella's benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. Flexible Work Schedule Health/Dental Insurance 401k Plan with Employer Match Short & Long Term Disability Profit Sharing Paid Time Off Leadership Development Program Fitness Reimbursement Tuition Reimbursement Referral Bonus Program Wellness Program Team Building Events Community Service Events

Why join us? It's an exciting time at AtkinsRéalis! We are rapidly growing in the US. Our company purpose is to build a better world for our planet and its people. We recognize the importance of making sure that our clients and employees, feel this purpose every day. AtkinsRéalis is proud of our company culture that promotes, diversity, equity and inclusion. Our company ethos include collaboration through the connection of people, data and technology. We are a global firm, who leverages having employees located throughout the world, creating valuable partnerships and doing our part to make this planet and its people, thrive. We need energetic, passionate and eager professionals like you to join our team. There has never been a better time to be a part of AtkinsRéalis! We are seeking a Protection & Controls Engineer to join our team in Binghamton, NY, Rochester, NY OR Orange, CT to lead and work on various Power Substation and P&C Engineering projects. The Protection & Controls Engineer reports to our Engineering Manager, NE Operations and requires working independently on fast paced technically complex design projects. P&C Engineers are responsible for supporting or leading substation engineering project teams, with the development of one-line diagrams for Substations, relay one-line diagrams, three lines, schematics and elementaries, control house panel layouts, relay selection, SCADA design, creation of bills of materials, and cable schedules. We are open to possibility of a hybrid work schedule depending on location. About Us AtkinsRéalis is one of the world's most respected design, engineering and project management consultancies. AtkinsRéalis has been providing infrastructure planning, engineering, construction, environmental consulting, urban planning, architecture, and program management services to public and private clients across the United States for more than 50 years. AtkinsRéalis has the depth and breadth of expertise to respond to the most technically challenging and time-critical infrastructure projects and the urgent transition to a low-carbon economy. How will you contribute to the team? * Work within a multi-discipline team to develop efficient and reliable electrical design packages for medium and high voltage substations. * Coordinate design activities to maintain project schedules, budget, quality requirements to ensure successful project completion. * Assist in site visits and station walkdowns, estimating, and attending project meetings. * Accountable to provide design activities in accordance with applicable codes and standards, including AtkinsRéalis's policies and procedures, such as Safety, Environmental, Quality Assurance and Quality Control. * Design electrical substation facilities including one lines, three lines, schematics and elementaries, wiring and interconnections, P&C calculations, and reports, etc. * Prepare specifications for material, equipment, and construction work. * Deliver accurate and thorough electrical designs that will meet industry standards and specifications and meet prudent engineering practices. * Review internal and external designs for code compliance, good design practice and constructability. * Coordinate design activities with other multi-discipline project team members. * Provide construction support including resolving site queries, attending site meetings, and performing site inspections during the construction phase of projects. * Maintain complete project documentation with respect to engineering studies and calculations, all design packages, as-built requirements and return data information. * Maintain good working relationship with internal groups that support projects such as other engineering disciplines, Drafting, Project Management etc. * Mentor and provide guidance to developing engineers within the department. What will you contribute? * Bachelor of Science degree in Electrical Engineering from a recognized institution. * Minimum of 2 years' experience in P&C electrical design. * A Professional Engineer (PE) registration (or eligible for registration) preferred. * Experience with IEC61850/Goose Messaging. * Proficiency in AutoCAD. * Knowledge of applicable industry standards including the National Electric Code (NEC), National Electric Safety Code (NESC), and IEEE. Ability to perform independently and in a team environment and provide project ownership. * Knowledge of modern power system, power system protection and transmission & distribution system. * Prior utility or utility consulting experience is a plus. * Strong client focus. * A high level of interpersonal communication skills, including a strong command of the English language with good written and oral communication skills. Work Environment & Physical Demands: * Additional hours may be necessary as workload dictates. * Travel to client sites may be required. What we offer at AtkinsRéalis: AtkinsRéalis realizes that health, mental and financial wellbeing, are all equally needed to achieve balance in life. We are pleased to offer a robust rewards package that help our employees have peace of mind in and outside of work. Our benefit offerings address all of the areas that are part of living a healthy life. We recognize that what is important to people, continues to change. Some of our other benefits to ensure our employees feel supported, include continuing to offer health and dental coverage and a full list below. Our culture is one of providing support and training for our employees to thrive. We offer learning and development programs, training, career pathing opportunities, and a tuition reimbursement plan. At AtkinsRéalis, you will enjoy a robust rewards package which includes: * Competitive salary * Flexible work schedules * Group Insurance * PTO plus two Floating Holidays * Paid Parental Leave (including maternity and paternity) * Retirement Savings Plan with employer match * Employee Assistance Program (EAP) * An inclusive culture of Employee Resources Groups centered around women, African-Americans, Hispanics, LGBTQ+, Neurodiversity and Emerging Professionals * A Foundation that is employee-funded with a 2-to-1 match from the company providing STEAM education for minorities from K-12 to college. If this sounds like you and you would like to expand your career with us, apply today! AtkinsRéalis is an equal opportunity, drug-free employer committed to diversity in the workplace. EOE/Minorities/Females/Veteran/Disability. Please review AtkinsRéalis Equal Opportunity Statement here: ************************************************************** AtkinsRéalis cares about your privacy and are committed to protecting your privacy. Please consult our Privacy Notice on our Careers site to know more about how we collect, use and transfer your Personal Data. By submitting your personal information to AtkinsRéalis, you confirm that you have read and accept our Privacy Notice. Expected compensation range is between $72,000 - $102,000 annually/hourly depending on skills, experience, and geographical location. Relocation assistance will be provided to qualified and approved candidates. Upon acceptance of an offer, all candidates must go through a drug screen test and background check. AtkinsRéalis is a federal contractor which mandates a satisfactory background screening report and drug test that supersedes state laws. Note to staffing and direct hire agencies: In the event a recruiter or agency who is not on our preferred supplier list submits a resume/candidate to anyone in the company, AtkinsRéalis family of companies, we explicitly reserve the right to recruit and hire the candidate(s) at our discretion and without any financial obligation to the recruiter or agency. ***************************************************** Worker Type Employee Job Type Regular At AtkinsRéalis, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences.

Did you love building as a kid? Do you enjoy troubleshooting complex systems and solving real-time challenges? Are you excited by the idea of working hands-on with automation in the field? Our engineers don't just design - they support, improve, and evolve the systems that power our customers' operations every day. At Modern Packaging, we're looking for someone who thrives on problem-solving, technical collaboration, and customer interaction. We offer rewarding, challenging opportunities throughout the world, across multiple packaging segments. If you're excited by how machines work and want to make them better, we want to talk to you. Do we have your attention? Keep reading. Modern Packaging is seeking an Aftermarket Electrical Controls Engineer who brings a hands-on, customer-focused mindset to supporting our installed base of automated packaging equipment. This role focuses on electrical troubleshooting, controls retrofits & upgrades, field service support, and customer issue resolution. You'll collaborate closely with our field service team, engineering peers, and our valued customers to enhance equipment performance and minimize downtime. This position reports to the Manager of Controls Engineering and is based on-site in Deer Park, NY, with regular travel to customer locations. Does this work interest you? As an Aftermarket Electrical Controls Engineer, you will: Troubleshoot and resolve electrical and controls issues on existing packaging equipment. Provide technical support to field service technicians and customer service teams. Design and implement retrofit solutions, including schematic updates and control system upgrades. Travel to customer facilities as needed for installation support, system diagnostics, and retrofit implementation. Assist in documenting changes and creating updated schematics using AutoCAD Electrical. Program and modify PLCs, HMIs, and servo systems to enhance machine functionality. Partner with engineering and manufacturing teams to analyze recurring issues and implement long-term solutions. Up to 30% travel within North America. What's in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. The education and experience you bring to a role with us matter. Placement within our salary range is determined based upon years of directly relatable experience for your position. These components, along with local and national compensation survey data, contribute to deciding a candidate's potential starting rate of pay. Total compensation includes your pay, potential short-term incentive opportunities, comprehensive medical/dental/vision programs, as well as life insurance, disability insurance, paid time off programs, a retirement savings plan with a company match, and a wellness program. And because we understand the importance of feeling protected, there is no waiting period for benefits - you are eligible on your first day of employment! Please note that the pay ranges listed on external job boards, outside our posting details, do not accurately reflect our internal compensation ranges. Base Salary Range: $105,000 - $120,000 If this sounds like you, we want to connect! Bachelor's Degree in Electrical Engineering or related field 2+ years of experience with electrical controls systems, ideally in the packaging or automation industry Proficiency in troubleshooting PLC and HMI systems (Allen-Bradley/Rockwell preferred) Hands-on experience with AutoCAD Electrical and control panel schematics Willingness to travel domestically for on-site customer support (approx. 25-40%) Strong interpersonal skills and comfort working directly with customers and field teams Preferred: Experience with retrofit projects or aftermarket support in a manufacturing environment Familiarity with UL, NEMA, and CE standards Knowledge of servo motor systems and industrial networking Pro Mach, Inc. We have been named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strengths of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally with the personal touch and feel of a smaller company where you can make an impact every day. Curious about life at ProMach? Follow us on LinkedIn, Twitter, and Instagram! More career opportunities to consider! Pro Mach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. #MODER

Job Type: Full-Time, On-Site Reports to: Vice President of Engineering Salary: $75,000 to $115,000 or more based on experience About TEC: TEC Building Systems LLC, founded in 1981, is a leading provider of custom-designed building automation control solutions in the New York City area. We specialize in engineering, commissioning, maintenance, and retrofit services for a wide range of clients. Our team is known for its innovative approach, adaptability, and commitment to excellence. More at: tecsystemsnyc.com. Control System Design Engineers are responsible for managing the design phase of projects, creating highly functional, cost-effective control system designs that comply with project plans and specifications. The design phase includes: Reviewing contract plans, specifications, proposals, and budgets Developing design project delivery schedule Designing DDC control panels, wring schematics, and system interfaces to control building mechanical, electrical and plumbing systems. Selecting control system products and developing project bill of materials Documenting system sequence of operations and operating parameters Designing BMS communication networks. Developing electrical installation wiring diagrams and scopes of work. 3+ years of experience. A design engineer works independently on small scale control system designs, or as part of a team on large scale projects. Candidate must demonstrate an understanding of all control system basics , electrical and electronic circuits and systems, contract document review, and possess exceptional organizational and communications skills. Required skills: Knowledgeable in building mechanical, electrical, and plumbing (MEP) systems. Able to read and understand architectural, mechanical, electrical, fire protection, and communication systems contract drawings and specifications. Proficient in AutoCAD, Bluebeam, and Microsoft Office suite Excellent oral and written communication skills Able to work on multiple projects and varying project teams. Degree in electrical or mechanical engineering preferred

We are seeking a skilled Electrical Engineer to design electrical systems under the guidance of a professional engineer. This role involves working on electrical distribution, grounding, backup power, general power distribution, lighting design and control, as well as fire alarm and lightning protection systems. The candidate will perform system design calculations, analyze electrical distribution options, and prepare design documents detailing power, lighting, and fire alarm system drawings. Responsibilities + Design electrical systems under the guidance of a Senior Engineer. + Perform system design calculations and analyze electrical distribution options. + Review and learn relevant building codes and standards. + Prepare design documents detailing power, lighting, and fire alarm system drawings. + Coordinate work with architects and engineers of other disciplines. Essential Skills + Bachelor's degree in Electrical Engineering or related field. + 4+ years of experience as an Electrical Engineer. + Proficient in AutoCAD. + Experience preparing schematics, one-line diagrams, contract documents, and reports. + Experience designing electrical distribution, grounding, backup power, general power distribution, lighting design and control, fire alarm, and lightning protection systems. Additional Skills & Qualifications + Experience with Revit. + Professional Engineer (P.E) license is a plus. + Self-motivated and enjoys collaborative problem-solving. + Good planning, organizational, and communication skills. + Interest in sustainable and innovative approaches to design. + Experience with infrastructure projects, including healthcare, data centers, central plants, and municipal projects. Work Environment This position offers a hybrid schedule, with three days a week in the Mineola office. Enjoy a collaborative and dynamic work culture with team outings such as fishing trips, trivia nights, happy hours, bowling nights, and a company softball team. There is an opportunity to work on multiple project types and potential for growth, including becoming a partner down the line. Enjoy a 2% profit-sharing benefit. Job Type & Location This is a Contract to Hire position based out of Mineola, NY. Pay and Benefits The pay range for this position is $40.00 - $67.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a hybrid position in Mineola,NY. Application Deadline This position is anticipated to close on Dec 26, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Job Title: Engineer - Distribution Infrastructure Reports to Manager - Distribution Engineering Reports in office, 5 days, Orange CT The base salary range for this position is dependent upon experience and location, ranging from: $95,000 $107,375 The Engineer will perform basic to moderately complex power systems engineering analysis, design, and calculations related to the repair, replacement, maintenance, or new construction of electric distribution infrastructure. Work is completed with minimal guidance from a mentor. Key Responsibilities * Perform engineering analysis, design, and calculations using standard methodologies and principles. * Develop and present design concepts, evaluate alternatives, and create action plans for service connections, in-service issues, or process improvements. * Prepare, review, and interpret drawings (e.g., site plans, schematics, one-line diagrams, material specs). * Apply design standards, industry codes, criteria, guidelines, policies, and procedures appropriately. * Recommend solutions and best practices for both standard and non-standard situations. * Identify and specify equipment; assemble construction documents and work breakdown structures. * Represent Distribution Infrastructure Engineering on project teams. * Provide guidance to less experienced colleagues and team members. * Review engineering work of drafters, designers, and fellow engineers. * Follow processes and standards to meet customer and stakeholder needs. * Promote cross-functional teamwork and collaboration. * Mentor junior engineers in distribution design and engineering development. * Work independently and collaboratively to design systems for straightforward situations. * Promote and adhere to company safety policies and practices. * Take responsibility for personal and team safety and health. * Develop and manage small projects, processes, and initiatives per UI guidelines. * Coordinate engineering phases for assigned projects/programs. * Plan, schedule, monitor, and control budgets, estimates, construction plans, and material orders. * Stay updated on industry developments through training and associations. * Assist in storm restoration efforts as needed. * Perform other related duties as required. Required Qualifications Technical Skills & Competencies * Theoretical engineering knowledge in planning, operations, and design. * Practical engineering experience in planning, operations, design, and construction. * Ability to perform economic analyses and develop business cases. * Proficiency in engineering documentation and interpretation. * Ability to review and approve engineering work for compliance. * Knowledge of local, state, and federal regulatory standards. Functional Competencies * Experience in Power Systems Engineering and related business practices. * Ability to work cross-functionally, explain complex issues, and meet deadlines. Education & Experience * BS/BA in Electrical or Mechanical Engineering from an ABET-accredited institution. * 2-5+ years of experience in power delivery systems engineering. * Experience with technical drawing or Computer-Aided Design (CAD) is required. #LI-AM1 #ON-SITE Company: THE UNITED ILLUMINATING COMPANY Mobility Information Please note that any applicant who is not a citizen of the country of the vacancy will be subject to compliance with the applicable immigration requirements to legally work in that country. At Avangrid we provide fair and equal employment and advancement opportunities for all employees and candidates regardless of race, color, religion, national origin, gender, sexual orientation, age, marital status, disability, protected veteran status or any other status protected by federal, state, or local law. If you are an individual with a disability or a disabled veteran who is unable to use our online tool to search for or to apply for jobs, you may request a reasonable accommodation by contacting our People and Organization department at ********************. Avangrid employees may be assigned a system emergency role and in the event of a system emergency, may be required to work outside of their regular schedule/job duties. This is applicable to employees that will work in Connecticut, Maine, Massachusetts, and New York within Avangrid Network and Corporate functions. This does not include those that will work for Avangrid Power. Avangrid employees may also be assigned a NERC Reliability Standards compliance role supporting Critical Infrastructure Protection (CIP) and/or Operations and Planning (O&P) responsibilities. This is applicable to employees that will work in electric transmission, operations, and cyber security business areas in Connecticut, Maine, Massachusetts, and New York within Avangrid Network and Corporate business areas. NERC Reliability Standards compliance roles and responsibilities may include additional access protections, training, audit engagement, and required evidence retention, and will be communicated by the employee's management. Job Posting End Date: January-30-2026

VJ X-Ray LLC (VJX) is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. A High Voltage Electrical Engineer at VJX is engaged in technical projects that include design, assembling, wiring, testing and troubleshooting complex, electro-mechanical, integrated x-ray sources and high voltage generators. : Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies for x-ray applications Test, troubleshoot and debug electrical components and systems Regularly work with power output up to 450 kV and up to 6kW Work on multiple projects varying in complexity from inception to completion Analyze equipment to establish operating data and conduct experimental tests Works with technical personnel to ensure prototype models are assembled according to design specification Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards Generate, revise or finalize BOMs Create and maintain engineering reports Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software and special projects) on system designs and to help resolve customer issues and provide world class customer service Participation in the creation of technical documentation, system manuals and customer facing documentation Safety Sensitive Position Essential Skills: Bachelor's Degree in Electrical Engineering Minimum of 3 years of experience in a manufacturing environment Strong working knowledge of power supplies, electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams Knowledge of analog circuit design Familiarity with soft switching techniques, schematics capture and PCB layout Ability to solve complex technical problems with minimal supervision Experience with a variety of testing equipment including but not limited to Oscilloscopes and Multimeters Proficient soldering skills Proficiency in the English language with established written and verbal communication skills Ability to effectively communicate with all levels of staff and customers to influence, train and negotiate simple to complex topics Proficiency in Outlook, Microsoft Word, Excel and PowerPoint Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization Must be legally authorized to work in the US Will need to successfully pass a drug screening and background check Non-Essential Skills: Knowledge of CE, UL, or other applicable regulatory guidelines or standards Basic understanding of an ERP system Ability to travel domestically and internationally for customer service purposes Physical Demands and Mental Demands: Regularly required to sit, walk, bend, stoop and stand in a manufacturing environment Will be required to lift, move, erect, install and assemble components of varying weight, height, length and width dimensions Day to day responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance Will need to repeatedly use hands & fingers to operate basic office equipment and operate hand and power tools standard to a production environment Expected to effectively communicate in person, on phone, and via email or other electronic devices on a continual and repetitive basis Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus Must be able to fulfill essential job function in a consistent state of alertness and safe manner May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required. On a regular basis, will be required to: use written and oral communication skills read and interpret data, information and documents analyze and solve non-routine and complex problems be creative, make judgements, use reasoning and make decisions observe and interpret situations learn and apply new information or skills perform detailed work on multiple, concurrent tasks work under intensive deadlines with frequent interruptions interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals. This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Discrimination of any type is not tolerated.

About Us : Scadea Solutions is a global talent acquisition and executive search company. We work exclusively with some of the most reputed and admired clients across various sectors and geographies. This is a very urgent role. Role - Battery Engineer Work Location - Holtsville, NY Project Duration - 6 months with possible extension Start Date- ASAP Key skill: Battery Technology EE: o Lithium Ion battery pack knowledge o General knowledge of electrical designs and mobile computing technologies preferred. o 5- 10 years' experience o PCB, electrical safety and regulatory design experience o General Laboratory tools - Oscilloscope, Logic Analyzer, DVM etc. Qualifications General knowledge of electrical designs and mobile computing technologies preferred. Additional Information Required Skills: Job Description: Performs highly complex application programming/systems development and support Performs highly complex configuration of business rules and technical parameters of software products Review business requirements and develop application design documentation Build technical components (Maximo objects, TRM Rules, Java extensions, etc) based on detailed design. Performs unit testing of components along with completing necessary documentation. Supports product test, user acceptance test, etc as a member of the fix-it team. Employs consistent measurement techniques Include testing in project plans and establish controls to require adherence to test plans Manages the interrelationships among various projects or work objectives

High Voltage Electrical Engineer VJ X-Ray LLC (VJX) is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. A High Voltage Electrical Engineer at VJX is engaged in technical projects that include design, assembling, wiring, testing and troubleshooting complex, electro-mechanical, integrated x-ray sources and high voltage generators. : Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies for x-ray applications Test, troubleshoot and debug electrical components and systems Regularly work with power output up to 450 kV and up to 6kW Work on multiple projects varying in complexity from inception to completion Analyze equipment to establish operating data and conduct experimental tests Works with technical personnel to ensure prototype models are assembled according to design specification Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards Generate, revise or finalize BOMs Create and maintain engineering reports Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software and special projects) on system designs and to help resolve customer issues and provide world class customer service Participation in the creation of technical documentation, system manuals and customer facing documentation Safety Sensitive Position Essential Skills: Bachelor's Degree in Electrical Engineering Minimum of 3 years of experience in a manufacturing environment Strong working knowledge of power supplies, electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams Knowledge of analog circuit design Familiarity with soft switching techniques, schematics capture and PCB layout Ability to solve complex technical problems with minimal supervision Experience with a variety of testing equipment including but not limited to Oscilloscopes and Multimeters Proficient soldering skills Proficiency in the English language with established written and verbal communication skills Ability to effectively communicate with all levels of staff and customers to influence, train and negotiate simple to complex topics Proficiency in Outlook, Microsoft Word, Excel and PowerPoint Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization Must be legally authorized to work in the US Will need to successfully pass a drug screening and background check Non-Essential Skills: Knowledge of CE, UL, or other applicable regulatory guidelines or standards Basic understanding of an ERP system Ability to travel domestically and internationally for customer service purposes Physical Demands and Mental Demands: Regularly required to sit, walk, bend, stoop and stand in a manufacturing environment Will be required to lift, move, erect, install and assemble components of varying weight, height, length and width dimensions Day to day responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance Will need to repeatedly use hands & fingers to operate basic office equipment and operate hand and power tools standard to a production environment Expected to effectively communicate in person, on phone, and via email or other electronic devices on a continual and repetitive basis Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus Must be able to fulfill essential job function in a consistent state of alertness and safe manner May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required. On a regular basis, will be required to: use written and oral communication skills read and interpret data, information and documents analyze and solve non-routine and complex problems be creative, make judgements, use reasoning and make decisions observe and interpret situations learn and apply new information or skills perform detailed work on multiple, concurrent tasks work under intensive deadlines with frequent interruptions interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals. This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Discrimination of any type is not tolerated.

Job DescriptionPart Time Electrical Engineer needed for preparing prototypes and testing. Power electronics experience helpful. Retirees welcome. Full Time electrical engineers who want to supplement main income also welcome. minimum 3-5 years experience Competitive Hourly rate. Ronkonkoma Office (near ISP airport). Need to start ASAP.

We are looking for an Electrical Engineer for our Westbury facility. In this role you will develop system integration concepts and realize them including commissioning, performing acceptance tests and trainings at customer sites. You also maintain a high level of expertise in production and maintenance support of these system types on-site at customers or remotely. Your Responsibilities: * Independent creation of project studies and concepts for customer orders including cost estimation * Development and Implementation of concept and system topologies for turnkey systems * Implementation of developed concepts considering applicable standards and regulations * Developing and creating Hardware Design Specification (HDS) to maintain internal high standards * Integration and Commissioning of thermal spray systems * Budget responsibility within a project or service intervention * Support and training of EQ organization in thermal spray systems (e.g. systems integration, installation and commissioning, …) on the job at customers and within our Oerlikon sites (e.g. Westbury, …) * On-site and remote support of customer (e.g. trouble shooting, …) * Support of Sales, Technical Sales for Sales and After-Sales * Documentation Support: * Support in the creation of technical manuals for internal and external use * Creating parts lists and other technical documents such as tables, diagrams, drawings and descriptions for operating, service and production instructions * Participation in project studies and development projects Your Outputs: * Concepts, System Topologies, HDS, Schematics, technical documents (e.g. tables diagrams, instructions, …) * System compliance with the quality regulations and instructions in the area of responsibility * Solves system-specific problem solutions in-house or at customers on site * Further development of system components, standards, integration and automation * Further development of existing products Leadership & Influence * Compliance with deadlines and costs * Ensuring the implementation of standards Interfaces, Collaboration, Stakeholders * Coordination with the design and software team * Communication with external partners and educational institutions Your Profile: * Possess a Bachelor's Degree (or higher) in Engineering (Electrical/Electronic) * Minimum 2-3 years of experience as a project/systems engineer preferred * At least 3 years of working experience in the industrial machines manufacturing, including interfaces with Process / Mechanical, Electrical, Instrumentation Control Automation works related Projects * Occasional travel possible up to 10% * Able to read and interpret drawings, specifications and other engineering related documentation * Proficient in electrical CAD systems (eplan/COMOS), Microsoft Office and related applications * Have a good command of English, and report writing. * Very good communication and collaboration skills We offer: Aside from a dynamic global culture and leading market position, we are proud to offer our employees development opportunities, competitive salary and a robust benefit program ALL available on first day of employment! The perks and benefits of working at Oerlikon include the following: * Comprehensive medical and prescription drug plan with low premiums, company sponsored HSA contributions and without cumbersome waiting periods to keep you going strong. * Excellent Dental and Vision coverage. * Employee Assistance, Financial and Wellness programs to help improve all aspects of your life journey. * 401(k) retirement savings plan with significant company match and financial planning and education options to help you achieve your retirement goals * Tuition reimbursement and internal education resources to satisfy your love of learning so you can continue to grow with us! * Generous paid time off to support your physical and mental wellbeing. * 12 paid company holidays to occasionally extend your weekends or time off. * 100% company paid life insurance and disability insurance * Employee Referral Bonus program because why not to bring your friends to work everyday! Why Oerlikon: As a global leader in engineering solutions that enhances the performance of products and services, Oerlikon is known for the quality of our technological advances. We maintain equally high standards in identifying talent, investing in professional development and empowering our people to pursue rewarding careers. #joinoerlikonus #joinourteam Are you curious? Then release your passion to succeed and

Job DescriptionDescription: The candidate will support the electrical design and test of Rate and Rate Integrating Gyroscopes. This will include the design of electrical gyroscope components such as motors, pickoffs and torquers, as well as custom built test fixtures and test harnesses. In addition, the candidate will assist in the design of tests and provide analytical support for testing Rate and Rate Integrating Gyroscopes, including Acceptance Test Procedures (ATP), scale factor, transfer function, drift, alignment, and 1st and 2nd order system stability characteristics (gain/phase analysis), etc. EDUCATION: Minimum 4-year degree in electrical or electronics engineering, or other technical degree with appropriate work history or background. EXPERIENCE: 5+ years dealing with four or more of the following: Electronic product or component design and/or analysis Basic understanding of 1st or 2nd order control systems (servo systems, spring/mass/damper) Electronics systems (amplifiers, power supplies, demodulators, signal conditioning, filters) Electromechanical, mechanical, or electromagnetic systems Engineered (specialized) products to customer/government specifications Custom (product specific) Test systems Environmental testing (temperature, shock, vibration as a minimum) Hands-on design, test, and troubleshooting experience required SKILLS: Required skill set shall include as a minimum: Can interpret, digest, and produce technical specifications and procedures Computer literacy Excellent communications, presentation, and written skills, including customer facing Analytical (math) modeling capability, 1st and 2nd order systems Electrical test equipment operation skills, e.g.; DVM, oscilloscope, signal generator PC Board design Analog circuit design and component selection Servo (control system) analysis, and system design (1st and 2nd order systems), gain/phase analysis Additional skills desirable: Advanced test equipment operation skills, e.g.; spectrum analyzer, distortion meter, EMI analysis equipment Microcontroller/microprocessor based digital and/or mixed signal circuit and system design Magnetic circuit analysis and design capability Basic mechanical instruments skills, e.g.; micrometers, calipers, dial indicators, precision levels An outstanding self-starter with a can-do attitude willing to go above and beyond the normal Requirements:

Are you passionate about electrical engineering and eager to make a meaningful impact on public infrastructure? Suffolk County DPW is seeking an Assistant Electrical Engineer to join our dedicated team. If you're looking for an opportunity to work on exciting projects, grow professionally, and enjoy a supportive work environment, this is the role for you! Join Our Team at the Suffolk County Department of Public Works (DPW): Building a Better Future Together! Key Elements Of The Role: Assist in the design, construction, inspection, and maintenance of public works projects. Prepare engineering plans, cost estimates, and material quantities for improvements. Conduct load studies and recommend upgrades to County electrical services. Act as a resident electrical engineer on construction projects, ensuring compliance with specifications. Supervise inspections and maintain up-to-date electrical drawings, specifications, and equipment instructions. Investigate and address faulty operations of electrical equipment to ensure proper functionality. What You Bring : Strong understanding of electrical engineering principles, construction specifications, and engineering drafting. Proficiency in technical computations, cost estimation, and the use of engineering instruments. Ability to write and interpret technical specifications, plans, and construction documents. Strong problem-solving skills and the ability to manage multiple priorities effectively. Benefits For You Now And Your Future Health Insurance: Suffolk offers a comprehensive health insurance plan, including medical, dental, and vision coverage Pension Paid Time Off: Vacation (2 weeks to start) is accrued based on length of service; sick leave allows employees to take time off for illness without sacrificing pay; personal days can be used for a variety of reasons; and thirteen (13) paid holidays. Work-Life Balance: County jobs offer regular working hours, reducing the need for overtime or irregular shifts. This helps employees maintain a good work-life balance. Overall, county government jobs offer a combination of competitive benefits and job security, making them an attractive option for many job seekers. *This position does not offer relocation assistance at this time **Sponsorship is not available for this role Salary: $59,038 per year MINIMUM QUALIFICATIONS OPEN COMPETITIVE Either : a) Graduation from a college with federally-authorized accreditation or registration by NY State with a Bachelor's Degree in Electrical Engineering or Mechanical Engineering, and two (2) years of experience in design and/or installation of electrical systems and equipment; or b) Graduation from a standard senior high school or possession of a high school equivalency diploma and six (6) years of experience in design and/or installation of electrical systems and equipment; or c) An equivalent combination of education and experience as defined by the limits of a) and b). FURTHER POSITION DETAILS: Thorough knowledge of construction specifications and of their application to public works Thorough knowledge of the principles, practices and instruments used in engineering drafting Through knowledge of mathematics and application to electrical engineering computation Good knowledge of the principles and practices of electrical engineering skill in the use of engineering instruments and equipment Ability to perform difficult technical computations to make estimates and tests, and to compile engineering data and statistics Ability to make difficult and technical engineering drawings Ability to write technical engineering specifications Ability to read and interpret construction plans and gain compliance with specifications in a tactful and impartial manner Ability to supervise assistants in a manner conducive to full performance and high morale Ability to establish and maintain effective working relationships with contractors and the general public Physical condition commensurate with the demands of the position. Why Join Suffolk County DPW? Impactful Work: Play a pivotal role in enhancing public infrastructure. Exciting Projects: Collaborate on diverse and meaningful public works initiatives. Professional Growth: Enjoy opportunities for advancement and skill development in a supportive environment. Work-Life Balance: We prioritize your well-being and provide an optimal work-life integration. This Role Is A Provisional Appointment A provisional appointment, which occurs only in the competitive class, is a temporary appointment to a position for which no eligible list exists or for which an eligible list exists with fewer than three candidates who are willing to accept the position. In order to become permanent, the employee who is provisionally appointed must take the next examination for the position in question. The appointment to the position is then made from among the three highest scoring passing candidates who indicate their willingness to accept the position. Civil Service law does not compel the appointing authority to choose the provisional employee should he or she be one of the three candidates Additional details regarding a Provisional Appointment can be reviewed at: ************************************************************** Suffolk County's Commitment to Diversity, Inclusion & Equity: Our focus is to promote, support, and implement the County-wide diversity and inclusion strategic plan. We achieve results in all our responsibilities through the use of diversity and inclusion best practices. We maintain a familiarity with Diversity & Inclusion trends and best practices. Suffolk County is an Equal Employment Opportunity Employer and does not discriminate against applicants or employees on the basis of race, color, religion, creed, national origin, ancestry, disability that can be reasonably accommodated without undue hardship, sex, sexual orientation, gender identity, age, citizenship, marital or veteran status, or any other legally protected status.

We are currently hiring a Protection and Control Engineer in LaBella's Program Management Services Division at our client's office. The Program Management Services Division at LaBella provides comprehensive management services for complex projects and multi-year capital programs. Project teams are established to provide a customized mix of business consulting, project management, financial control and monitoring, administrative, and technical support services. Duties: * Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don't remove required protections already in place or at least be aware of how things work today before we modify existing schemes. * Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with AVANGRID TM standards * Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects * Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes) * Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings * Review/provide input to Owner's Aspen model changes as required for individual capital projects * Provide design support during implementation/testing and commissioning of the above the items * Provide feedback to Owner on existing TM standards and help refine the Owner's design practices * Ensure all as-built documentation gets filed appropriately in the plant filing location at Owner * Lead overall automation and integration design for all capital projects * Review/design SCADA point indexes * Review contractor provided HMI screens/settings for all capital projects * Review/design Protection settings and settings basis * Review/design IED Data Maps * Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.) * Review automated maintenance data gathering (Digital Substation Data) point lists * Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation * Provide design support during implementation/testing and commissioning of the above items * Perform constructability review and ensure adequate automation and integration coverage is available for each outage step (SCADA etc.) Salary Range: $75,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location.

**RWE Clean Energy, LLC** **To start as soon as possible, full time, permanent** **Functional area:** Engineering **Remuneration:** Exempt The **Senior Engineer I, Electrical Project Engineering** , is responsible for overseeing the electrical systems design for onshore wind, solar, and storage projects from development to handover to operations. **Role Responsibilities:** + Design of balance of plant packages from development to IFC + Engineering project support during pre-construction, construction, and turnover to Operations + Grid code compliance and interconnection requirements + Specification and evaluation of major balance of plant electrical equipment + Power system modeling and studies + Coordinating project engineering topics during construction + Management of 3rd party engineering consultants + Coordinating with internal stakeholders and subject matter experts during the project lifecycle + Support NERC Compliance documents and studies + Ensure that the highest level of health, safety, and environmental protection is incorporated into designs and standards + Support the development of electrical engineering standards + Support the development of engineering processes and procedures **Job Requirements and Experiences:** + A Bachelor of Science in Electrical Engineering from an ABET-accredited college engineering program + Advanced degrees can reduce technical experience requirements + Minimum 10 years of professional experience (post undergraduate) in electrical engineering + Specific areas of experience and competency include transmission design, substation design, collection and distribution design, major equipment specification, power system studies, and system protection and control + Experience in renewable generation (wind turbine, solar PV, and BESS storage) project design is preferred + Strong interpersonal skills, with the ability to manage customer relationships + Demonstrated desire to learn about the Company and the renewables space + Excellent proficiency with Microsoft Office (Excel, Word, PowerPoint, Outlook) and Teams + Strong leadership, communication, and ability to meet deadlines + Strong organization skills and ability to coordinate multiple tasks and deliverables + Ability to multitask, while working independently and as part of a team + Motivated self-starter, goal-oriented, and strong problem-solving abilities + Proven ability to empathize, build relationships, and effectively communicate with people from a diverse set of backgrounds + Responds well to direction, is easy to challenge and develop, and is coachable + Is detail-oriented, has strong business acumen, and a sound understanding of business concepts **Work Environment:** This position is an office-based role with some travel and visits to other RWECE offices and field locations. The employee must be able to sit, walk, or stand for long durations of time. _Applicants must be legally authorized to work in the United States. RWE Clean Energy is unable to sponsor or take over sponsorship of employment visas at this time._ **Pay range:** The annual base salary range for this position in California, New York, and Illinois is $145,000 - $180,000. The listed salary range represents our good faith estimate for this position and represents the range for new hire salaries across all U.S locations. Please note that the salary information is a general guideline only. RWE considers factors such as (but not limited to) scope and responsibilities of the position, candidate's education & work experience, training & certifications, and key skills as well as market and business considerations at the time of the offer. **Benefits offered:** Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. Eligible employees also participate in short-term incentives, in addition to salary. **Apply with just a few clicks:** ad code **90350** Any questions? **Contact rwece_******************** We look forward to meeting you. Of course, you can find us on LinkedIn, Instagram, Facebook, YouTube and Xing, too. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. Through its subsidiary RWE Clean Energy, RWE is the third largest renewable energy company in the United States, with a presence in most U.S. states from coast to coast. RWE's team of about 2,000 employees in the U.S. stands ready to help meet the nation's growing energy needs. With its homegrown and fastest-to-market product, RWE supports the goal of American Energy dominance and independence. To that end, RWE Clean Energy is committed to increasing its already strong asset base of over 10 gigawatts of operating wind, solar and battery projects, focusing on providing high-quality jobs. RWE invests in local and rural communities while strengthening domestic manufacturing supporting the renaissance of American industry. This is complemented by RWE's energy trading business. RWE is also a major offtaker of American liquified natural gas (LNG). As an energy company with a successful history spanning more than 125 years, RWE has an extensive knowledge of the energy markets and an excellent expertise in all major power generation and storage technologies, from nuclear, coal and gas to hydro, batteries, wind and solar. Every project brings constantly-evolving technical, practical and social challenges - and drives a culture where everybody thrives, has fun and feels excited by each day. As the third largest renewable energy company in the U.S., you'll also have the freedom to act with conviction and courage as we pivot to new technologies - and continuously improve, together.

RWE Clean Energy, LLC To start as soon as possible, full time, permanent Functional area: Engineering Remuneration: Exempt The Engineer II, Electrical Project Engineering, is responsible for overseeing the electrical systems design for onshore wind, solar, and storage projects from development to handover to operations. Role Responsibilities: * Design of balance of plant packages from development to IFC * Engineering project support during pre-construction, construction, and turnover to Operations * Grid code compliance and interconnection requirements * Specification and evaluation of major balance of plant electrical equipment * Power system modeling and studies * Coordinating project engineering topics during construction * Management of 3rd party engineering consultants * Coordinating with internal stakeholders and subject matter experts during the project lifecycle * Support NERC Compliance documents and studies * Ensure that the highest level of health, safety, and environmental protection is incorporated into designs and standards * Support the development of electrical engineering standards * Support the development of engineering processes and procedures Job Requirements and Experiences: * A Bachelor of Science in Electrical Engineering from an ABET-accredited college engineering program * Advanced degrees can reduce technical experience requirements * Minimum 5 years of professional experience (post undergraduate) in electrical engineering * Specific areas of experience and competency include transmission design, substation design, collection and distribution design, major equipment specification, power system studies, and system protection and control * Experience in renewable generation (wind turbine, solar PV, and BESS storage) project design is preferred * Strong interpersonal skills, with the ability to manage customer relationships * Demonstrated desire to learn about the Company and the renewables space * Excellent proficiency with Microsoft Office (Excel, Word, PowerPoint, Outlook) and Teams * Strong leadership, communication, and ability to meet deadlines * Strong organization skills and ability to coordinate multiple tasks and deliverables * Ability to multitask, while working independently and as part of a team * Motivated self-starter, goal-oriented, and strong problem-solving abilities * Proven ability to empathize, build relationships, and effectively communicate with people from a diverse set of backgrounds * Responds well to direction, is easy to challenge and develop, and is coachable * Is detail-oriented, has strong business acumen, and a sound understanding of business concepts Work Environment: This position is an office-based role with some travel and visits to other RWECE offices and field locations. The employee must be able to sit, walk, or stand for long durations of time. Applicants must be legally authorized to work in the United States. RWE Clean Energy is unable to sponsor or take over sponsorship of employment visas at this time. Pay range: The annual base salary range for this position in California, New York, and Illinois is $110,000 - $125,000. The listed salary range represents our good faith estimate for this position and represents the range for new hire salaries across all U.S locations. Please note that the salary information is a general guideline only. RWE considers factors such as (but not limited to) scope and responsibilities of the position, candidate's education & work experience, training & certifications, and key skills as well as market and business considerations at the time of the offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. Eligible employees also participate in short-term incentives, in addition to salary. Apply with just a few clicks: ad code 91187 Any questions? Contact rwece_****************** We look forward to meeting you. Of course, you can find us on LinkedIn, Instagram, Facebook, YouTube and Xing, too. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. RWE Clean Energy is the third largest renewable energy company in the United States, with a presence in most U.S. states from coast to coast. RWE's team of about 2,000 employees in the U.S. stands ready to help meet the nation's growing energy needs. With its homegrown and fastest-to-market product, RWE supports the goal of American Energy dominance and independence. To that end, RWE Clean Energy is committed to increasing its already strong asset base of over 10 gigawatts of operating wind, solar and battery projects, focusing on providing high-quality jobs. RWE invests in local and rural communities while strengthening domestic manufacturing supporting the renaissance of American industry. This is complemented by RWE's energy trading business. RWE is also a major offtaker of American liquified natural gas (LNG). Yes Nearest Major Market: Austin Job Segment: Construction, Electrical Engineering, Wind Energy, Environmental Engineering, Project Engineer, Engineering, Energy