Controls engineer jobs in Colorado Springs, CO - 99 jobs

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. The Enterprise Effects Division (EED) drives integration of Aerospace's strategic capabilities across the national space enterprise. The division leverages a broad array of engineering disciplines against a wide-ranging and dynamic portfolio of programs, customers, and national challenges. EED spans the capability lifecycle from concept and architecture design to performance assessment to application of space and space-enabled capabilities. The Space Control and Awareness Department (SCAD) is seeking a new team member to support mission analyses and operations. SCAD performs concept development, systems engineering, architecture analysis, algorithm development and evaluation support for national security space customers emphasizing electronic warfare (EW), directed energy (DE) effects, space domain awareness (SDA), Radar, Electro-Optical (EO) and Infrared (IR) sensors, orbit determination, and space protection and security. The Space Domain Awareness and Space Control Analyst will provide project and technical leadership, analytical support, algorithm development, systems engineering and architecting, and modeling and simulation analysis for space protection, space threat susceptibility, directed energy analysis, and space domain awareness. Candidate will interact directly with government customers as well as Aerospace program office personnel in the Colorado Springs area and collaborate closely with Engineering and Technology Group (ETG) and program office personnel in El Segundo, CA, Chantilly, VA, and other locations. Work Model: This is a 100% on-site position located in Colorado Springs, CO. What You'll Be Doing Contribute to risk and resilience assessments over a broad range of threats to satellite operations including, but not limited to, RF and optical interference and counterspace threats. Support other focus areas of the department, which could include modeling and risk assessments of kinetic threats (such as debris, collision, and disposal), Space Domain Awareness, and mission operations. Conduct a range of analysis using a framework of modeling, simulation and analysis capabilities including in-house, custom and commercially available/government provided modeling tools Analyze electro-optical (EO), infrared (IR), radar and passive radio frequency (RF) sensor concepts, architectures, and algorithms Directly support the technical lead for a modeling and simulation effort for the Space Security and Defense Program by providing analysis, development support and guidance of early career engineers Provide independent assessments and lead studies with teams of analysts What you need to be successful Space Domain Awareness and Space Control Analyst Minimum Requirements: Advanced degree in mathematics, engineering, physics, computer science or equivalent, or a bachelor's degree with eight (8) years of applicable experience Demonstrated experience within the SDA, space control mission areas or MW/MT/MD mission areas Experience with, or understanding of, electronic warfare and directed energy effects Experience in modeling, simulation, analysis, and/or algorithm development Led development of computer tools and simulations to support analyses of interdisciplinary support teams and performing general systems engineering and integration support Experience in at least one the following programming languages; Java, C++, Python, MATLAB, C, or FORTRAN. Good interpersonal communication and briefing skills along with the ability to work independently and interact effectively with high-level government, Aerospace, and contractor personnel. This position requires the ability to obtain and maintain a security clearance, which is issued by the U.S. government. U.S. citizenship is to obtain a security clearance. How you can stand out Current TS/SCI clearance. Background in command and control. Experience with EO/IR sensors, especially for missile warning/missile defense Operational experience as an orbit analyst, space control operator, battle manager in the air, maritime or missile domains (e.g. AWACS, AEGIS, GMD, HIMARS, etc.), or an Air Force weapons school graduate Experience with or understanding of electronic warfare and/or passive RF collection modeling Experience with space surveillance network sensor operations, or other SOSI network sensor operations Fluency in agile software development using object-oriented languages such as C++ or Java We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $117,300.00 - $175,900.00Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: Operate Strategically Lead Change Engage with Impact Foster Innovation Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: Comprehensive health care and wellness plans Paid holidays, sick time, and vacation Standard and alternate work schedules, including telework options 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire Flexible spending accounts Variable pay program for exceptional contributions Relocation assistance Professional growth and development programs to help advance your career Education assistance programs An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color, religion, genetic information, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at ************ or by email at ****************************** . You can also review Know Your Rights: Workplace Discrimination is Illegal.

Do you love bringing "out-there" ideas to life? We are innovators on a mission to unite, explore and inspire. As an aerospace engineer, you will research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex aerodynamic components, structures, and systems. Your technical duties involve the design and development, analysis, and test of new products and processes throughout the product lifecycle. The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations - with an unrivaled record of on time and on (or under) budget deliveries. **Qualifications You Must Have:** + Bachelor's of Science degree in Aerospace Engineering, Mechanical Engineering, Physics, or other related discipline and typically 0-2 years of relevant experience + Must have been a SNCSummer 2025 Intern + The ability to obtain and maintain aSecret U.S. Security Clearanceis required + Basic knowledge of engineering principles and practices + Familiarity with Computer Aided Engineering tools and Finite Element Analysis (FEA) + Some experience working in multi-disciplinary design and development teams **Qualifications We Prefer:** + Exposure to Engineering Simulation such Computational Fluid Dynamics (CFD) and Thermal Analysis using tools such as StarCCM or CFD++. + Understanding of aircraft external loads, aircraft performance and stability and control. + Familiarity with wind tunnel and aircraft flight test. + Background in the Aerospace and Defense Industry + Understanding of system-level static and dynamic modeling and simulation + Exposure to aircraft stability principles and control system design and analysis + Knowledge of industry standard aerospace principles, to include, but not limited to parametric design, model-based definition, fundamentals of flight mechanics This posting will be open for application for a minimum of 5 days and may be extended based on business needs. Estimated Starting Salary Range: $82,039.23 - $112,803.95. Compensation varies depending on a wide array of factors, such as candidates' key skills, relevant work experience, and education/training/certifications. The disclosed range estimate may be adjusted for any applicable geographic differential associated with the location at which the position may be filled. SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more (********************************************** . **IMPORTANT NOTICE:** To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce. Learn more about the background check process for Security Clearances. (**************************** SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We're known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation's most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team! SNC is an Equal Opportunity Employer committed to an environment free of discrimination. Employment decisions are made based on merit without regard to race, color, age, religion, sex, national origin, disability, status as a protected veteran or other characteristics protected by law.

←Back to all jobs at SOMOS IWT INC Controls Engineer II/III SOMOS IWT INC is an EEO Employer - M/F/Disability/Protected Veteran Status Controls Engineer II/III Our Culture: Located in Colorado Springs, Colorado SOMOS IWT is an OEM that manufactures an end-to-end solution for many customers that need slicing and grinding solutions. Our customers work in a variety of industries, including medical, defense, precision optics, electronic sensors, watches, and green technologies like EV, solar, and fuel cells. Our 20+ employee family-owned company have an entrepreneurial spirit focused on innovation. We have a casual, high-energy, results-oriented culture and are excited about our business and the ability to contribute to the suc cess of the group. With a full range of competitive benefits including a generous paid time off program and 401k match, our employees can enjoy time away from work in one of the most beautiful areas in the country. SOMOS IWT INC is an Equal Opportunity Employer which promotes a drug/alcohol free work environment with manda tory pre-employment drug testing and on-going random drug testing as required. Position Summary: As a Controls Engineer at SOMOS IWT, you will develop some of the most advanced industrial automation equipment in the world. You'll design and implement control systems for applications such as slicing, polishing, and material handling across industries like Medical, Defense, EV, Optics, and Semiconductor. This role involves complete lifecycle ownership of control systems-from requirements gathering and component selection to cabinet layout, PLC/HMI programming, prototyping, deployment, and sustainment. In addition to control system design, this role will contribute to the development of higher-level software applications for equipment monitoring, data acquisition, and integration with enterprise systems. You will report to the Operations Manager and collaborate with cross-functional teams including mechanical, electrical, field service, and software engineers. This is a hands-on role requiring direct interaction with machinery, frequent troubleshooting, and prototype iteration. Opportunity to contribute to R&D initiatives and help shape future automation technologies. Minimum Requirements: Education Bachelor's degree in Electromechanical Engineering, Mechatronics, Computer Engineering, Industrial Engineering, or related field. Required Education 2-3 years of hands-on experience with industrial automation systems, including PLCs, HMIs, drives, and sensors Strong skills in object-oriented programming. Knowledge of industrial IoT frameworks or edge computing environments. Capable of physical assembly, debugging, electrical and mechanical troubleshooting Motion experience required Good understanding of software version control (Git) and agile development practices. Experience with SCADA/MES integration and software architecture preferred Familiar with common industrial communication protocols Preferred Experience Strong servo motor tuning experience (including large inertia mismatch configurations) Proficient in high-performance PID tuning Experience with databases (SQL, NoSQL) for logging and traceability. Certifications in automation or vendor-specific platforms (e.g., Beckhoff, Yaskawa) Experience deploying software on Windows/Linux environments in production. Duties and Responsibilities The essential functions include, but are not limited to the following: Program PLCs in Ladder Logic, Structured Text (STL), SFC, Codesys, TwinCAT, or similar environments. Develop and maintain data acquisition and analysis tools to interface with control systems. Implement SCADA/MES connectivity, APIs, and middleware for factory integration. Design and document modular software architectures that scale across multiple machine platforms. Develop HMI interfaces using Weintek and Ignition platforms Configure and integrate drives and PLCs from Beckhoff, Bosch Rexroth, Yaskawa, Automation Direct, Applied Motion Products, and others Physical Demands and Work Environment The physical demands described here are representative of those that must be met to successfully perform this role. Ability to lift and move items up to 50 lbs. Work environment includes time spent in the office, electronics lab, on the production floor, and at customer facilities. Ability to work overtime as needed Travel Up to 25% travel to key suppliers or customers Weekend travel on a case-by-case basis Compensation & Benefits Salary Range: $95,000 - $135,000 (commensurate with experience) Comprehensive health insurance 401(k) match Generous PTO Work in a collaborative and high-ownership engineering culture FLSA & Employment Status Full Time Exempt How to Apply Please visit our careers page to see more job opportunities. The Company is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. All applicants are considered for all positions without regard to race, religion, color, sex, gender, sexual orientation, pregnancy, age, national origin, ancestry, physical/mental disability, medical condition, military/veteran status, genetic information, marital status, ethnicity, alienage or any other protected classification, in accordance with applicable federal, state, and local laws. By completing this application, you are seeking to join a team of hardworking professionals dedicated to consistently delivering outstanding service to our customers and contributing to the financial success of the organization, its clients, and its employees. Equal access to programs, services, and employment is available to all qualified persons. Those applicants requiring accommodation to complete the application and/or interview process should contact a management representative.] Legal Disclaimer: This document is intended for informational purposes only, and does not constitute legal information or advice. This information and all HR Support Center materials are provided in consultation with federal and state statutes and do not encompass other regulations that may exist, such as local ordinances. Transmission of documents or information through the HR Support Center does not create an attorney-client relationship. If you are seeking legal advice, you are encouraged to consult an attorney. Please visit our careers page to see more job opportunities.

Primary metals manufacturer in Colorado needs a Process Automation Engineer with heavy manufacturing experience. As part of the Maintenance team, you will be responsible for developing new processes that improve steelmaking production and rolling mill maintenance. Design control systems - both hardware and software - that improve production times, material quality, and equipment performance. Seek opportunities to improve quality, save time, save money with automation of the company's process control systems. Work with Rockwell/Allen Bradley PLC's, drives, and HMI. Write requirements specifications, and high-level design and systems architecture specifications related to control of steel production processes Provide on-going maintenance support and resolution of process control system problems, including taking ownership of such problems to completion Qualifications REQUIREMENTS Bachelors degree in Electrical Engineering or Mechanical Engineering. Must have the ability to read drawings - hydraulics, pneumatics, electrical Should have five or more years' experience as an Automation specialist in a heavy manufacturing environment. Experience preferred in the steel industry, but will consider aluminum manufacturing, some kinds of automotive manufacturing, mining, glass, cement, paper, lumber manufacturing. Relocation assistance is available. Additional Information Pearl Martin, Image Associates Inc. pearl AT jobspot DOT com Please look me up on LinkedIn, and send me an invitation to Link: ********************************

Design HVAC temp control systems Lighting and access control systems Responsible for projects, start to finish, submittal drawings, 30% 90% and closeout Responsible for independently designing complex projects Focus on design to add or improve energy conservation Controls for HVAC systems including chillers, boilers, air handling units, heat recovery and terminal units BAS system design for HVAC, Lighting and Access control systems using the Delta Controls Analysis and Estimation Prepare cost estimates for control systems for commercial, industrial and institutional HVAC systems Design/build budgeting Energy utilization conservation calculations Manage labor budget Complete re-estimation, RFI, and change orders Communication Work with customers to collect the key information needed to ensure the finished design meets their needs, as well as helping them understand options and benefits from the finished systems Learn from coworkers to increase knowledge of technical and design information and participate in training other departments on pertinent matters Collaborate with account managers on construction estimates and proposal writing Regularly update your manager of progress, concerns, and encumbrances, Training and Development Study and use our robust internal resources including training materials, previously created designs, specific training classes and modules, and vendor training classes and materials Gain or maintain expert knowledge of our Delta product line and equipment including BACnet protocols and associated controls devices Collaborate with expert coworkers and managers on increasingly complex and challenging projects Qualifications Must-Have BS Mechanical Engineering Experience in building control systems and/or equivalent HVAC knowledge Expert knowledge of HVAC and product and systems equipment and specs Building automation industry experience

This position is posted by Jobgether on behalf of a partner company. We are currently looking for a Controls Software Engineer - REMOTE. The role is pivotal in creating and validating centralized operational technologies critical for various sites. You'll ensure compliance with set specifications, focusing on streamlining and standardizing procedures. By engaging in collaboration across teams, your influence will resonate throughout the organization, fostering a culture of innovation. This is an opportunity to work within a tight-knit team dedicated to pushing the boundaries of technology and creating a sustained impact in the industry.Accountabilities Create and assist in the execution of software controls standards. Standardize PLC code, Software Defined Network (SDN) requirements, and operational procedures. Develop optimal software requirement lists and facilitate supplier selection. Implement firewall rules and create standardized data collection templates. Maintain communication with business partners locally and remotely. Apply expertise to troubleshoot technical issues and resolve problems on current and future projects. Requirements Bachelor's Degree in Electrical Engineering, Computer Software Engineering, or related discipline. Minimum 5 years of experience in automated manufacturing systems. U.S. citizenship required for program compliance. Ability to obtain a U.S. Government Secret Clearance. Strong understanding of SQL databases and software development methodologies. Benefits Competitive salary range of 86,800 USD - 165,200 USD. Medical, dental, and vision insurance options. 401(k) match and flexible spending accounts. Flexible work schedules and paid time off. Employee assistance program and parental leave. Why Apply Through Jobgether? We use an AI-powered matching process to ensure your application is reviewed quickly, objectively, and fairly against the role's core requirements. Our system identifies the top-fitting candidates, and this shortlist is then shared directly with the hiring company. The final decision and next steps (interviews, assessments) are managed by their internal team. We appreciate your interest and wish you the best!Data Privacy Notice: By submitting your application, you acknowledge that Jobgether will process your personal data to evaluate your candidacy and share relevant information with the hiring employer. This processing is based on legitimate interest and pre-contractual measures under applicable data protection laws (including GDPR). You may exercise your rights (access, rectification, erasure, objection) at any time.#LI-CL1We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Type: **Engineering/Engineering Support** Pay Range **$117,572 to $138,319** Date First Posted **12/5/25** Applications are being accepted through: _*If no date is displayed, applications are being accepted on an ongoing basis; however, this job posting may close at any time after a minimum of 5 days of being posted._ **Control Systems Engineer** *This job is eligible for relocation assistance Our Operations Technical Services Department is looking to strengthen its System Monitoring, Diagnostics, and Controls Group by adding a skilled **Control Systems Engineer** . This role is ideal for someone with hands-on experience in all facets of control systems- including instrumentation, automation, design, installation, and maintenance. If you're passionate about engineering excellence and want to make an impact, we'd love to hear from you! As the **Control Systems Engineer** , you will have the opportunity to lead the design, installation, commissioning, and continuous improvement of control systems for a variety of industrial process applications across our four service lines (electric, gas, water, and wastewater). In this job, you will support all service lines with automation and control system needs. You will engage with operations, maintenance, and engineering staff to ensure the reliable operation of critical utility processes. _This position will be filled at the Engineer III level._ **Key Focus Areas:** + Technical lead for the design, installation, commissioning, and maintenance of control systems upgrades, new installations, and modifications in a variety of industrial process settings + Project management for control system projects + Support the implementation and maintenance of cybersecurity requirements within the control networks + Provide technical guidance and direction for the standardization of control systems and operational technology network architecture throughout the enterprise + Specification and procurement of control systems, instrumentation, and supporting equipment + Provide guidance to support troubleshooting, control loop tuning, and control strategy optimization + Analyze plant processes, to design and implement improvements + Develop, review, and approve testing processes and procedures + Develop technical training material and provide mentoring for engineering staff to broaden the section's control system knowledge and capabilities + Program and configure in a variety of industrial automation applications, including DCS, PLC, HMI, SCADA, and databases + Prepare, maintain, and submit reports; perform a technical review of engineering reports from junior engineers and outside consultants + Perform short and long-range planning on future projects + Train field and support engineers and serve as a resource **Who You Are...** An energetic self-starter with a focus on continuous improvement, enjoys working in a collaborative environment, and possesses strong communication skills with proficiency in control systems in one or more of the following industries: energy, utilities, oil/gas, or other industrial process areas. Additionally, **a Bachelor of Engineering degree is required;** an ABET-accredited program is highly preferred. **_A valid, unrestricted driver's license is required for this role._** Additionally, the ideal candidate will have experience with the following: **Highly desired:** + Programming and/or configuration of the PLC, DCS, and HMI environments, including but not limited to Emerson Ovation, Emerson DeltaV, GE Mark VIe, Allen-Bradley, GE Cimplicity, FactoryTalk SE and ME + Information technology infrastructure components as they relate to industrial automation systems + Experience with Modbus, LON, Ethernet IP, Profibus, Foundation Fieldbus and other industrial communication protocols **Valued:** + IT/OT interface with experience specifically dealing with cybersecurity + Hardware and software design development for process and energy-based applications + Control system lifecycle phases + Experience with safety instrument system (SIS) design, development and installation. **PHYSICAL REQUIREMENTS/WORKING CONDITIONS:** + Exerts up to 20 lbs. of force occasionally, and/or up to 10 lbs. of force frequently, and/or a small amount of force constantly to move objects. Physical demands exceed those required for Sedentary Work. Even though the weight lifted may be only a small amount, a job should be rated Light Work when it requires walking or standing to a significant degree or when it requires sitting most of the time, but entails pushing and/or pulling of arm or leg controls and/or when the job requires working at a production rate pace entailing the constant pushing and/or pulling of materials even though the weight of those materials is small. NOTE: The constant stress and strain of maintaining a production rate pace, especially in an industrial setting, can be and is physically demanding work even though the amount of force exerted is negligible. + Positions in this class typically require climbing, balancing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, grasping, talking, hearing, seeing and repetitive motions. Incumbents may be subjected to moving mechanical parts, vibrations, fumes, odors, dusts, gases, poor ventilation, chemicals, oils, extreme temperatures, workspace restrictions and intense noises. The military job codes/duty codes most closely related to this role are: 120A, 12A, 51S, 881A, 32E1, 32E2, 32E3, 32E4, 32EX, 5311, 5904, 5310, 122, 5960, 8004, 144, 1301, 1302, 1310, 2070, 6004, 6005, 9620, 9622, 9624, 9626, 9630, 9631, 9632 **Our Commitment to Our Employees...** Our people are the heart and soul of Colorado Springs Utilities. They keep the lights on, gas flowing, water coming in, and wastewater leaving. We don't just say people are important - we prove it! That's why we are honored to invest in protecting the health and financial security of our employees and their families through our rich benefits program. **Time Off** **to Recharge** + Vacation - Start with 13 days annually, increasing to 24 days with tenure + Personal Leave -3 days per year + Paid Holidays -12 paid holidays per year + Sick Leave - 12 days per year for personal or family health needs + Vacation Buy - Option to purchase up to 40 additional hours annually **Health & Wellness - Benefits elected are effective the first of the following month** + Medical Plans: Three comprehensive options, including a $0 premium High-Deductible Health Plan (HDHP) with Health Savings Account (HSA) eligibility + Zero Health: Access to hundreds of medical services at no cost + Dental & Vision: Two dental plans and one vision plan + Family Building-Benefits: Support for fertility, preservation, adoption, and surrogacy + Wellness Program: A voluntary program that rewards you for prioritizing self-care! If you're enrolled in a our medical plan, you and your spouse can earn up to $600 in HRA or HSA contributions by completing healthy activities + Flexible Spending Accounts (FSA): Pre-tax contributions for healthcare and dependent care expenses + Health Savings Account (HSA): Available with HDHP **Financial & Retirement Security** + Pension Plan: Colorado PERA provides retirement benefits and peace of mind + Supplemental Retirement Plans: PERAPlus 401(k), MissionSquare Roth IRA, and 457 plans + Disability Coverage: Short-Term and Long-Term Disability insurance available + Life Insurance: Employer-paid coverage with optional supplemental plans + Long-Term Care Insurance: Available for purchase to support extended care needs **Additional Support** + Employee Assistance Program (EAP): Confidential support for mental health, stress, legal, financial, and work-life balance + Tuition Reimbursement: Up to $5,250 annually to support continued education + Public Service Loan Forgiveness: As a qualifying employer, your student loan payments may be eligible for loan forgiveness **_ATTENTION_** **_:_** + _All positions will be posted for a minimum of 5 calendar days._ + _Starting pay will be determined within the posted pay range based on the experience, education, and training of the successful candidate; if there is a single pay rate posted, the job starts at that rate._ + _Colorado Springs Utilities does not sponsor work visas of any kind, including H-1B, TN, or F-1 student visas (with or without OPT or STEM work authorization), or any other employment-based visas._ **_All eligible applicants must be authorized to work in the United States and work authorization must not be based on any work visa._** **Colorado Springs Utilities is an Equal Employment Opportunity/Affirmative Action employer.** Colorado Springs Utilities is committed to the principles of Affirmative Action and Equal Opportunity in accord with Vietnam Era Veterans Readjustment Assistance Act, 38 U.S.C. § 4212, as amended (VEVRAA), and § 503 of the Rehabilitation Act of 1973, as amended (§ 503). In addition, no person shall be unlawfully discriminated against because of race, color, creed, national origin or ancestry, sex (including pregnancy, gender identity, gender expression, and sexual orientation), age, religion, veteran status, disability, genetic information, marital status, or any other basis protected under state or federal law. Human Resources shall assure Colorado Springs Utilities' benefits, classification, compensation, employee development, employee relations, and employment programs, conform to current legal and regulatory requirements and the provisions of Colorado Springs Utilities' Affirmative Action Plan in accordance with VEVRAA and § 503. **Accessibility Accommodations** . If you are an individual with a disability or a disabled veteran who is unable to use our online tools to search and apply for jobs, you may request a reasonable accommodation by contacting us at accessibility@csu.org or by calling ************. This option is reserved for individuals who are unable to use or require assistance with the online tools as the result of a disability and is not intended for other purposes. **E-Verify and Right to Work Notice** . Federal law requires all employers to verify the identity and employment eligibility of all persons hired to work in the United States. Colorado Springs Utilities participates in E-Verify. For more information on your rights and responsibilities as an applicant, please visit: **************************************************************************** . If you have a legal right to work in the United States, there are laws to protect you against discrimination in the workplace. You should know that no employer can deny you a job or fire you because of your national origin. Unless mandated by law or government contract, employers cannot require you to be a U.S. Citizen or permanent resident or refuse any legally acceptable documents. If any of these things have happened to you, you may have a valid charge of discrimination that can be filed with the OSC. Contact the OSC for assistance in your own language. Call **************. TDD for the hearing impaired is **************. In the Washington, D.C., area, please call ************, TDD ************ Or write to: U.S. Department of Justice Office of Special Counsel NYA 950 Pennsylvania Ave., N.W. Washington, DC 20530. **Have a question?** If you have a question about a position or need assistance from a recruiter, email us at ********************* or call ************. Job Type: Engineering/Engineering Support

Title: Ground System Controller (GSC) SME KBR's National Security Solutions team provides high-end engineering and advanced technology solutions to our customers in the intelligence and national security communities. In this position, your work will have a profound impact on the country's most critical role - protecting our national security. Why Join Us? * Innovative Projects: KBR's work is at the forefront of engineering, logistics, operations, science, program management, mission IT and cybersecurity solutions. * Collaborative Environment: Be part of a dynamic team that thrives on collaboration and innovation, fostering a supportive and intellectually stimulating workplace. * Impactful Work: Your contributions will be pivotal in designing and optimizing defense systems that ensure national security and shape the future of space defense. KBR is seeking a Ground System Controller (GSC) SME to join our team in Colorado Springs, CO. Active TS/SCI clearance required. The GSC SME functions as the technical expert for ground systems and the Modernized Earth Terminal (MET) with responsibility for hardware installation and maintenance, technical support, software upgrade and configuration management for Satellite Communications (SATCOM) and Data Communications (DATACOM) systems supporting WSOC missions. ROLES AND RESPONSIBILITIES: * Provides expert technical analysis and recommendations to resolve performance and operations issues with WSOMS weapons systems and MET. * Regularly interfaces with and provides support to all GSCs at each WSOC. * Leads troubleshooting efforts in WSOMS weapon systems and MET performance and operations. * Provides customer support during working groups and ground systems meetings concerning MET and MET equipment. * Assist with property management for the Depot and logistics personnel. * Expert for all WSOMS weapons systems and MET infrastructure/facilities related to maintenance, security systems (alarms, cameras, etc.); UPS Expert System Bypass Module (SBM) operations. (facility and user devices); HVAC systems; generator maintenance; and server room support. * Reviews all GSC location records of all PMIs, deficiencies / problems, and repairs to determine possible systemic issues. * Serves as mission essential personnel and required to be onsite during their shift independent of weather and base closures. BASIC QUALIFICATIONS: Education and Experience: * AA/AS and 8+ years of experience, or equivalent work experience in lieu of degree. Citizenship and Clearance: * US Citizen. * Active Top Secret security clearance. Technical Knowledge: * Understanding of cybersecurity and network administration is a plus. PREFERRED QUALIFICATIONS: * The CompTIA Security+ (or higher) certification. * Demonstrates exceptional degree of ingenuity, creativity, and resourcefulness in SATCOM operations and maintenance. * Able to troubleshoot and resolve problems independently and in high pressure situations. SCHEDULED WEEKLY HOURS: * Normal hours of operation (0730-1630 hours). * 40 hours, 5 days a week. TRAVEL: * May require travel to CONUS and OCONUS locations, expect approximately 5%. * This position is contingent upon contract award. * Basic Compensation: $38.85 - $48.56 This range is for the CO area only The offered rate will be based on the selected candidate's work location, knowledge, skills, abilities and/or experience, clearance level, contract affordability and in consideration of internal parity. Additional Compensation: KBR may offer bonuses, commissions, or other forms of compensation to certain job titles or levels, per internal policy or contractual designation. Additional compensation may be in the form of sign on bonus, relocation benefits, short term incentives, long term incentives, or discretionary payments for exceptional performance. * Ready to Make a Difference? If you're excited about making a significant impact in the field of space defense and working on projects that matter, we encourage you to apply and join our team at KBR. Let's shape the future together KBR Benefits KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development. Belong, Connect and Grow at KBR At KBR, we are passionate about our people and our Zero Harm culture. These inform all that we do and are at the heart of our commitment to, and ongoing journey toward being a People First company. That commitment is central to our team of team's philosophy and fosters an environment where everyone can Belong, Connect and Grow. We Deliver - Together. KBR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

Job Description PHASOR USA LLC. is a subsidiary of Quanta Services specializing in engineering, design, and testing / commissioning of medium to high voltage electrical facilities. Focused on providing the most cost-effective and efficient solutions to power system engineering, we are involved in a diverse range of projects from preliminary engineering through to the commissioning and startup. We are currently seeking a highly motivated and experienced Lead Commissioning Engineer / Commissioning Manager to join our field services team on a full time basis, initial work sites will be based around the Denver, CO area. If you are an excellent communicator and skilled problem-solver with strong attention to detail, we offer a dynamic work environment where you will be continuously challenged in all aspects of the testing and commissioning process. As a condition of employment, successful applicants agrees to undergo a Backcheck screening, which includes identity verification and a criminal background check. Responsibilities: Leading a team in the testing and commissioning of power system protection & control schemes in the utility, power generation, and oil & gas industry. Testing and commissioning of MV/HV power system protection & control schemes in the utility, power generation, and oil & gas industry. Read and interpret drawings and troubleshoot / resolve technical issues. Train/develop employees to ensure highest performance standards are met. Report preparation and submission. Assist with generation of commissioning startup procedures or work instructions. Ensure compliance with all safety practices as per corporate, client, and industry standards. Initiate and/or respond to customer inquiries, discuss trouble details and confirm resolutions. Qualifications: The successful candidate should possess a Bachelor's Degree in Electrical Engineering, Power Systems Electrician Journeyman Ticket, or an Electrical Engineering Technologist Diploma from a recognized institute. Comprehensive understanding of key principles of electrical power system protection and controls including SCADA, relay protection, metering, equipment functionals, and telecom networks. Minimum 5+ years of proven experience in the medium voltage and/or high voltage utility substations and power generation industry with experience in a supervisory role leading and running projects in greenfield and brownfield substations. Relay testing of microprocessor-based protection IED's (SEL, ABB, Siemens, GE, etc.) with fully automated test equipment (Omicron CMC356) and test data management. Experienced in high voltage primary equipment testing and commissioning involving power transformers, reactors, circuit breakers, CT's, PT's, surge arrestors, disconnect switches, cap and reactor Banks, etc. Testing and commissioning as per NETA/IEEE/IEC standards. Strong understanding of safety standards. Strong interpersonal and communication skills and an extreme attention to detail are essential. Knowledge of the Microsoft office software suite of programs coupled with strong computer skills. Excellent organizational skills and ability to manage a wide variety of issues simultaneously. Strong analytical, risk assessment and problem solving skills. NETA Testing Certification an asset. Background checks and Drug and Alcohol Pre-Access Testing will be required as part of employment. Requirements: Must be legally able to work in the United States, VISA Sponsorship is not available for this position. Valid driver's license with clean driving record. Ability to work for extended periods out of town. Additional Information: Working hours are generally from 7am - 5:30pm at 10hrs/day. Daily work hours and shifts are subject to change based on project requirements, applicants must be flexible to accommodate these changes when required. Phasor USA LLC. offers a competitive compensation and benefits package and excellent opportunities for growth and advancement. We are an Equal Opportunity Employer committed to a diverse workforce. While we appreciate all applications we receive and the applicant's interest in our company, only those who are selected for an interview will be contacted. Other names for these roles include: Commissioning Technologist, Commissioning Engineer, Commissioning Lead, Commissioning Specialist, Commissioning Manager, Field Service Specialist, Field Service Technologist/Technician, Protection and Control Technologist/Technician, Protection and Control Specialist, Protection and Control Testing Engineer, Relay Technologist/Technician, Power System Technician, Power System Electrician, PSE, Electrical Engineering Technologist AI is not used to screen or assess candidates. The role posted is for an active vacancy we have in Phasor but applications may also be used for future positions. Salary variations depend on factors such as qualifications, relevant years of experience, and current market conditions specific to the role. Salary range: $130,000-$170,000 (excepted yearly earnings may vary) Benefits Dental care Disability insurance Employee assistance program Extended health care Life insurance On-site parking Paid time off 401k Vision care Wellness program

We are seeking a **Transmission Line Engineer** who will work as a member of a dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The successful candidate will serve as an Engineer on electric transmission line design projects for extra high-voltage (EHV) overhead and underground systems for some of the largest utilities in the country. This employee will apply NESC, ASCE, ACI and other applicable standards in the engineering and design of electrical overhead and underground systems, voltage conversion projects, new capacity projects, and infrastructure replacement projects. Additionally, he/she will perform engineering analyses, prepare bidding documents, draft plans and specifications, and prepare material procurement and construction documents. This will involve working with a multi-person Leidos team and interfacing with clients, project planning, environmental, permitting, and construction management personnel. **Work Location:** Ideally, candidate will reside in either Colorado or Minnesota to work a remotely but all qualified candidates residing in the U.S. will be considered. **Required Education & Experience:** - Bachelor's or Master's degree in Civil, Structural, Electrical, or Mechanical Engineering - Experience using PLS-CADD and PLS-POLE - 2+ years of relevant experience in the design of electric utility transmission systems with a Bachelor's, or 1+ years experience with a Master's degree - Work effectively in team environment; can also work independently - Excellent verbal and written communication skills; ability to communicate with clients and project teams - Work in client office is a possibility and/or periodic travel may be required **Desired Experience:** - Experience with TOWER is a plus - EIT or PE certification is desirable - Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus No two career paths will ever look the same. At Leidos, we know the most talented and diverse engineering professionals will always have a multitude of career choices; your time at Leidos will be a wise investment in your career and in yourself. Protect yourself and your family, with the benefits of working for a world-class employer. When you join Leidos, you join a Fortune 500 company and one of Ethisphere Institute's "World's Most Ethical Companies". PDSTLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. **Original Posting:** October 10, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. **Pay Range:** Pay Range $59,150.00 - $106,925.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. **About Leidos** Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ************** . **Pay and Benefits** Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at **************/careers/pay-benefits . **Securing Your Data** Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ***************************** . If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission (******************************* . **Commitment to Non-Discrimination** All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. \#Remote \#Featuredjob REQNUMBER: R-00168612-OTHLOC-PL-2D5072 All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Leidos will consider qualified applicants with criminal histories for employment in accordance with relevant Laws. Leidos is an equal opportunity employer/disability/vet.

at Samtec, Inc Samtec Optical Group Co-Op & Internship Opportunities Samtec, Inc., a $1B+ privately held, global electronic connector manufacturer headquartered in New Albany, Indiana, with high growth and a focus on emerging technology, is seeking engineering Co-Ops and interns for its Optical Group locations in Santa Clara, CA, Vista, CA, and Colorado Springs, CO. This is a fast-paced environment focused on development of the Samtec FireFly™ and HALO™ optical transceiver product lines. Co-ops and interns will work with electrical, mechanical, optical, process, data, and software engineers within the Optical Group. The position will be responsible for completing assigned projects, building trust with team members, maintaining customer focus, as well as initiating and following up on actions taken. The ideal candidate for this position will have the ability to work with and take direction from senior engineers, and be creative, passionate, and resourceful while taking initiative to explore new solutions. The ability to work part time during the school year is highly desirable. Upcoming and recent grads are also welcome to apply. The student will be exposed to and be expected to learn the basics of many different disciplines and technologies. Depending on the student's background and interests, these may include: Rapid mechanical prototyping Thermal design, test, and analysis High speed (RF) electrical design and measurement Semi-conductor laser physics and reliability Optical laboratory test and measurement High volume manufacturing and process development Test automation and scripting Data science and engineering data analysis Software development for laboratory and manufacturing systems QUALIFICATIONS: Student pursuing a degree in Electrical, Mechanical, Optical, Process/Industrial, Computer/Software Engineering; Physics; Data Science; or related field Junior/Senior or graduate level preferred, or exceptional Freshman/Sophomore with demonstrated hobby, project, or internship experience in a related field Excellent Written and Verbal Communication skills Strong interpersonal skills and ability to work well with a team Strong analytical and problem-solving skills Effective time management skills with the ability to manage multiple projects Eager to gain new expertise and quick to pick up required skills SAMTEC, Inc. is an Equal Opportunity Employer and committed to creating a diverse environment. All employment decisions at Samtec are based in business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, pregnancy or parental status, age, disability, sexual orientation, gender and/or gender identity/expression, marital status, past or present military service, family medical history or genetic information, or any other status protected by applicable laws. Privacy Policy: *****************************************************

Descripción Puesto en Samtec, Inc Samtec Optical Group Co-Op & Internship Opportunities Samtec, Inc., a $1B+ privately held, global electronic connector manufacturer headquartered in New Albany, Indiana, with high growth and a focus on emerging technology, is seeking engineering Co-Ops and interns for its Optical Group locations in Santa Clara, CA, Vista, CA, and Colorado Springs, CO. This is a fast-paced environment focused on development of the Samtec FireFly™ and HALO™ optical transceiver product lines. Co-ops and interns will work with electrical, mechanical, optical, process, data, and software engineers within the Optical Group. The position will be responsible for completing assigned projects, building trust with team members, maintaining customer focus, as well as initiating and following up on actions taken. The ideal candidate for this position will have the ability to work with and take direction from senior engineers, and be creative, passionate, and resourceful while taking initiative to explore new solutions. The ability to work part time during the school year is highly desirable. Upcoming and recent grads are also welcome to apply. The student will be exposed to and be expected to learn the basics of many different disciplines and technologies. Depending on the student's background and interests, these may include: Rapid mechanical prototyping Thermal design, test, and analysis High speed (RF) electrical design and measurement Semi-conductor laser physics and reliability Optical laboratory test and measurement High volume manufacturing and process development Test automation and scripting Data science and engineering data analysis Software development for laboratory and manufacturing systems QUALIFICATIONS: Student pursuing a degree in Electrical, Mechanical, Optical, Process/Industrial, Computer/Software Engineering; Physics; Data Science; or related field Junior/Senior or graduate level preferred, or exceptional Freshman/Sophomore with demonstrated hobby, project, or internship experience in a related field Excellent Written and Verbal Communication skills Strong interpersonal skills and ability to work well with a team Strong analytical and problem-solving skills Effective time management skills with the ability to manage multiple projects Eager to gain new expertise and quick to pick up required skills

Arizona - Remote; Arkansas - Remote; Baton Rouge, LA; Colorado - Remote; Colorado Springs, CO; Dallas, TX; Denver, CO; Des Moines, IA; Fayetteville, AR; Florida - Remote; Fort Worth, TX; Georgia - Remote; Idaho - Remote; Indiana - Remote; Iowa - Remote; Joplin, MO; Kansas - Remote; Kansas City, MO; Kentucky - Remote; Lincoln, NE; Little Rock, AR; Louisiana - Remote; Loveland, CO; Michigan - Remote; Mississippi - Remote; Missouri - Remote; Montana - Remote; Nebraska - Remote; Nevada - Remote; New Hampshire - Remote; New Mexico - Remote; North Carolina - Remote; North Dakota - Remote; North Kansas City, MO; Ohio - Remote; Oklahoma - Remote; Oklahoma City, OK; Omaha, NE; Overland Park, KS; Phoenix, AZ; South Dakota - Remote; Tennessee - Remote; Texas - Remote; Tulsa, OK; Utah - Remote; Virginia - Remote; West Virginia - Remote; Wisconsin - Remote; Wyoming - Remote **Company Description** We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. **Job Description** We are seeking an Electrical Engineer Expert to join our Data Center team and serve as the subject matter expert on hyperscale, mission-critical campus and facility electrical systems. This role is ideal for someone who thrives in a fast-paced, ever-evolving environment and is passionate about supporting project teams with deep technical expertise. You will be the go-to resource for electrical design strategy, QA/QC oversight, and technical mentorship across high-impact data center projects. Your work will directly influence the reliability, scalability, and innovation of our electrical systems supporting hyperscale clients. **Key Responsibilities** + Serve as the technical lead for electrical systems in hyperscale and/or colocation data center projects, including power distribution, switchgear, UPS systems, and emergency power. + Provide expert-level guidance on design standards, code compliance (NEC, NFPA, IEEE), and commissioning protocols. + Collaborate with project managers, engineers, and external partners to ensure technical excellence and alignment with client goals. + Mentor and support engineering teams, offering technical reviews, troubleshooting, and strategic input. + Lead QA/QC processes and ensure all deliverables meet the highest standards of quality and reliability. + Stay current with emerging technologies and trends in mission-critical infrastructure and integrate them into project strategies. **Qualifications** **You are passionate about:** + Working collaboratively with others. + Having ownership in the work you do. + Using your talents to positively affect communities. **You bring to the team:** + Strong communication skills. + Ability to contribute and work well with a team. + Excellent interpersonal and problem-solving skills. + Bachelor's degree in Electrical Engineering and PE License + 12+ years of experience in electrical engineering with a focus on hyperscale data centers or mission-critical facilities. + Proven ability to lead technical design efforts and support multidisciplinary teams. + Strong understanding of medium and low voltage systems, redundancy strategies, and commissioning practices. + Excellent communication and collaboration skills. + Passion for mentoring and developing engineering talent. \#LI-DD1 Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. Colorado Pay Range $150,000-$236,000USD **Additional Information** Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: + Receive a competitive 401(k) match + Be empowered to build your career with tailored development paths + Have the possibility for flexible work arrangements + Engage in work that has a positive impact on communities + Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Noticehere (************************************** . Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email.

Job Title: Hardware EngineerJob Description We are seeking a highly experienced and energetic Hardware Engineer to support the US Space Force, Space Systems Command in performing operational maintenance and sustainment of ground-based radars. These radars are critical to US and Allied strategic missile surveillance, warning, defense, and space surveillance missions. The position is based in Colorado Springs, Colorado. Responsibilities * Perform electrical and mechanical analysis at the rack level, including signal, power, and thermal aspects. * Generate engineering drawings in accordance with IEEE standards, including rack assembly drawings, interconnect wiring diagrams, and custom cable assemblies. * Analyze supplier Line Replaceable Units (LRUs) including step-file and 3D model review for compliance to specifications. * Support system integration, test, development, and execution of various types of complex communications systems. * Develop technical solutions to complex problems requiring regular use of ingenuity and creativity. * Provide lab and site integration, test, and maintenance support. * Troubleshoot systems to resolve complex issues and coordinate with engineers responsible for sustaining sub-systems. Essential Skills * Bachelor's Degree with nine plus (9+) years of experience, or four plus (4+) years of experience in lieu of degree. * Active Secret Clearance. * Experience in designing new or modifying existing products, developing technical specifications for production, analyzing hardware configuration and processing solutions, and testing hardware conformance to specifications. Additional Skills & Qualifications * Experience sustaining ground-based radar systems such as PARCS, UEWR, or PAVE PAWS. * Knowledge of the Integrated Tactical Warning and Attack Assessment (ITW/AA) mission and associated enterprise. Work Environment The role is about 90% remote, with occasional on-site requirements. The Ground Based Radar Maintenance and Sustainment Service (GMASS) program focuses on sustaining, protecting, and integrating mission systems related to ground-based radars. These radars are crucial for delivering resilient space capabilities and providing early warning during conflicts. Job Type & Location This is a Contract position based out of Colorado Springs, CO. Pay and Benefits The pay range for this position is $120000.00 - $145000.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a hybrid position in Colorado Springs,CO. Application Deadline This position is anticipated to close on Jan 26, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible™. Learn more at ************** and on LinkedIn and Twitter (X). Senior Analog Design Engineer About the Role As a Senior Analog Design Engineer at Analog Devices, you will design and develop advanced analog and mixed-signal integrated circuits, working on complex projects that require deep technical expertise and independent judgment. Working in Colorado Springs, CO, you'll apply broad principles and concepts to solve diverse technical challenges while collaborating with cross-functional teams. This role combines hands-on technical leadership with opportunities to mentor junior engineers and influence architectural decisions. Key Responsibilities Design and Development: Create sophisticated analog and mixed-signal ICs including DC/DC voltage and current regulators, data converters, passive filters, amplifiers and power distribution systems Technical Leadership: Contribute to architecture development and optimization using industry-standard tools, making key design decisions Circuit Simulation: Perform detailed block and transistor-level design, simulation, evaluation, and debugging to ensure optimal performance Performance Verification: Ensure designs meet performance objectives across process, voltage, and temperature ranges Cross-Functional Collaboration: Work closely with product definers, verification engineers, process engineers, test engineers, and application engineers Mentorship: Provide technical guidance to junior engineers and influence development approaches Problem Resolution: Identify and solve complex design challenges, applying experienced judgment within defined practices Must Have Skills Analog Circuit Design: Strong expertise in designing and analyzing analog circuits including DC/DC regulators, amplifiers, data converters and filters with the ability to optimize designs for specific applications Mixed-Signal IC Design: Advanced ability to design and integrate analog/digital circuits in complex mixed-signal environments with consideration for signal integrity Circuit Architecture: Experience developing circuit architectures that balance performance requirements with practical implementation constraints Simulation Modeling: Proficiency with simulation tools such as SPICE, MATLAB, and Cadence Design Suite to validate complex designs across various conditions Integrated Circuit Layout: Strong understanding of physical IC layout considerations and experience optimizing layouts for performance CMOS Technology: Deep knowledge of CMOS circuit design principles and implementation techniques for integrated circuits Preferred Education and Experience Master's degree or PhD in Electrical Engineering or related field 5+ years of relevant experience in analog circuit design Experience with DC/DC converters and low noise precision circuit design Knowledge of general electrical lab equipment Motivated, results oriented and creative problem solver with good writing, presentation and overall communication skills. Why You'll Love Working at ADI At Analog Devices, you'll be part of a collaborative and innovative team that's shaping the future of technology. We offer a supportive environment focused on professional growth, competitive compensation and benefits, work-life balance, and the opportunity to work on cutting-edge projects that make a real impact on the world. You'll have access to continuous learning opportunities and mentorship from industry experts. Join us and help create the technologies that bridge the physical and digital worlds, making a tangible difference in how people live, work, and connect. For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process. Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group. EEO is the Law: Notice of Applicant Rights Under the Law. Job Req Type: ExperiencedRequired Travel: Yes, 10% of the time Shift Type: 1st Shift/DaysThe expected wage range for a new hire into this position is $108,800 to $149,600. Actual wage offered may vary depending on work location, experience, education, training, external market data, internal pay equity, or other bona fide factors. This position qualifies for a discretionary performance-based bonus which is based on personal and company factors. This position includes medical, vision and dental coverage, 401k, paid vacation, holidays, and sick time, and other benefits.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. The Enterprise Effects Division (EED) drives integration of Aerospace's strategic capabilities across the national space enterprise. The division leverages a broad array of engineering disciplines against a wide-ranging and dynamic portfolio of programs, customers, and national challenges. EED spans the capability lifecycle from concept and architecture design to performance assessment to application of space and space-enabled capabilities. The Space Control and Awareness Department (SCAD) is seeking a new team member to support mission analyses and operations. SCAD performs concept development, systems engineering, architecture analysis, algorithm development and evaluation support for national security space customers emphasizing electronic warfare (EW), directed energy (DE) effects, space domain awareness (SDA), Radar, Electro-Optical (EO) and Infrared (IR) sensors, orbit determination, and space protection and security. The Space Domain Awareness and Space Control Analyst will provide project and technical leadership, analytical support, algorithm development, systems engineering and architecting, and modeling and simulation analysis for space protection, space threat susceptibility, directed energy analysis, and space domain awareness. Candidate will interact directly with government customers as well as Aerospace program office personnel in the Colorado Springs area and collaborate closely with Engineering and Technology Group (ETG) and program office personnel in El Segundo, CA, Chantilly, VA, and other locations. Work Model: This is a 100% on-site position located in Colorado Springs, CO. What You'll Be Doing * Contribute to risk and resilience assessments over a broad range of threats to satellite operations including, but not limited to, RF and optical interference and counterspace threats. * Support other focus areas of the department, which could include modeling and risk assessments of kinetic threats (such as debris, collision, and disposal), Space Domain Awareness, and mission operations. * Conduct a range of analysis using a framework of modeling, simulation and analysis capabilities including in-house, custom and commercially available/government provided modeling tools * Analyze electro-optical (EO), infrared (IR), radar and passive radio frequency (RF) sensor concepts, architectures, and algorithms * Directly support the technical lead for a modeling and simulation effort for the Space Security and Defense Program by providing analysis, development support and guidance of early career engineers * Provide independent assessments and lead studies with teams of analysts What you need to be successful Space Domain Awareness and Space Control Analyst Minimum Requirements: * Advanced degree in mathematics, engineering, physics, computer science or equivalent, or a bachelor's degree with eight (8) years of applicable experience required * Demonstrated experience within the SDA, space control mission areas or MW/MT/MD mission areas * Experience with, or understanding of, electronic warfare and directed energy effects * Experience in modeling, simulation, analysis, and/or algorithm development * Led development of computer tools and simulations to support analyses of interdisciplinary support teams and performing general systems engineering and integration support * Experience in at least one the following programming languages; Java, C++, Python, MATLAB, C, or FORTRAN. * Good interpersonal communication and briefing skills along with the ability to work independently and interact effectively with high-level government, Aerospace, and contractor personnel. * This position requires the ability to obtain and maintain a security clearance, which is issued by the U.S. government. U.S. citizenship is required to obtain a security clearance. How you can stand out * Current TS/SCI clearance. * Background in command and control. * Experience with EO/IR sensors, especially for missile warning/missile defense * Operational experience as an orbit analyst, space control operator, battle manager in the air, maritime or missile domains (e.g. AWACS, AEGIS, GMD, HIMARS, etc.), or an Air Force weapons school graduate * Experience with or understanding of electronic warfare and/or passive RF collection modeling * Experience with space surveillance network sensor operations, or other SOSI network sensor operations * Fluency in agile software development using object-oriented languages such as C++ or Java We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $117,300.00 - $175,900.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: * Operate Strategically * Lead Change * Engage with Impact * Foster Innovation * Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color, religion, genetic information, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at ************ or by email at ****************************** . You can also review Know Your Rights: Workplace Discrimination is Illegal.

Primary metals manufacturer in Colorado needs a Process Automation Engineer with heavy manufacturing experience. As part of the Maintenance team, you will be responsible for developing new processes that improve steelmaking production and rolling mill maintenance. Design control systems - both hardware and software - that improve production times, material quality, and equipment performance. Seek opportunities to improve quality, save time, save money with automation of the company's process control systems. Work with Rockwell/Allen Bradley PLC's, drives, and HMI. Write requirements specifications, and high-level design and systems architecture specifications related to control of steel production processes Provide on-going maintenance support and resolution of process control system problems, including taking ownership of such problems to completion Qualifications REQUIREMENTS Bachelors degree in Electrical Engineering or Mechanical Engineering. Must have the ability to read drawings - hydraulics, pneumatics, electrical Should have five or more years' experience as an Automation specialist in a heavy manufacturing environment. Experience preferred in the steel industry, but will consider aluminum manufacturing, some kinds of automotive manufacturing, mining, glass, cement, paper, lumber manufacturing. Relocation assistance is available. Additional Information Pearl Martin, Image Associates Inc. pearl AT jobspot DOT com Please look me up on LinkedIn, and send me an invitation to Link: ********************************

Job Description PHASOR USA LLC. is a subsidiary of Quanta Services specializing in engineering, design, and testing / commissioning of medium to high voltage electrical facilities. Focused on providing the most cost-effective and efficient solutions to power system engineering, we are involved in a diverse range of projects from preliminary engineering through to the commissioning and startup. We are currently seeking a highly motivated and experienced Intermediate Commissioning Engineer / Technologist to join our field services team on a full time basis, initial work sites will be based around the Denver, CO area. If you are an excellent communicator and skilled problem-solver with strong attention to detail, we offer a dynamic work environment where you will be continuously challenged in all aspects of the testing and commissioning process. As a condition of employment, successful applicants agree to undergo a Backcheck screening, which includes identity verification and a criminal background check. Responsibilities: Testing and commissioning of MV/HV power system protection & control schemes in the utility, power generation, and oil & gas industry. Read and interpret drawings and troubleshoot / resolve technical issues. Train/develop employees to ensure highest performance standards are met. Report preparation and submission. Assist with generation of commissioning startup procedures or work instructions. Ensure compliance with all safety practices as per corporate, client, and industry standards. Initiate and/or respond to customer inquiries, discuss trouble details and confirm resolutions. Qualifications: The successful candidate should possess a Bachelor's Degree in Electrical Engineering, Power Systems Electrician Journeyman Ticket, or an Electrical Engineering Technologist Diploma from a recognized institute. Comprehensive understanding of key principles of electrical power system protection and controls including SCADA, relay protection, metering, equipment functionals, and telecom networks. Minimum 3+ years of proven experience in the medium voltage and/or high voltage utility substations and power generation industry with experience in a supervisory role leading and running projects in greenfield and brownfield substations. Relay testing of microprocessor-based protection IED's (SEL, ABB, Siemens, GE, etc.) with fully automated test equipment (Omicron CMC356) and test data management. Experienced in high voltage primary equipment testing and commissioning involving power transformers, reactors, circuit breakers, CT's, PT's, surge arrestors, disconnect switches, cap and reactor Banks, etc. Testing and commissioning as per NETA/IEEE/IEC standards. Strong understanding of safety standards. Strong interpersonal and communication skills and an extreme attention to detail are essential. Knowledge of the Microsoft office software suite of programs coupled with strong computer skills. Excellent organizational skills and ability to manage a wide variety of issues simultaneously. Strong analytical, risk assessment and problem solving skills. NETA Testing Certification an asset. Background checks and Drug and Alcohol Pre-Access Testing will be required as part of employment. Requirements: Must be legally able to work in the United States, VISA Sponsorship is not available for this position. Valid driver's license with clean driving record. Ability to work for extended periods out of town. Additional Information: Working hours are generally from 7am - 5:30pm at 10hrs/day. Daily work hours and shifts are subject to change based on project requirements, applicants must be flexible to accommodate these changes when required. Phasor USA LLC. offers a competitive compensation and benefits package and excellent opportunities for growth and advancement. We are an Equal Opportunity Employer committed to a diverse workforce. While we appreciate all applications we receive and the applicant's interest in our company, only those who are selected for an interview will be contacted. Other names for these roles include: Commissioning Technologist, Commissioning Engineer, Commissioning Lead, Commissioning Specialist, Commissioning Manager, Field Service Specialist, Field Service Technologist/Technician, Protection and Control Technologist/Technician, Protection and Control Specialist, Protection and Control Testing Engineer, Relay Technologist/Technician, Power System Technician, Power System Electrician, PSE, Electrical Engineering Technologist AI is not used to screen or assess candidates. The role posted is for an active vacancy we have in Phasor but applications may also be used for future positions. Salary variations depend on factors such as qualifications, relevant years of experience, and current market conditions specific to the role. Salary range: $105,000-$155,000 (excepted yearly earnings may vary) Benefits Dental care Disability insurance Employee assistance program Extended health care Life insurance On-site parking Paid time off 401k Vision care Wellness program

Job Type: **Engineering/Engineering Support** Pay Range **$117,00 to $138,000** Date First Posted **10/30/25** Applications are being accepted through: 1/26/26 _*If no date is displayed, applications are being accepted on an ongoing basis; however, this job posting may close at any time after a minimum of 5 days of being posted._ **Electrical Engineer III - Transmission Planner** Are you looking to expand your experience in the dynamic and rapidly evolving energy sector!? The role of a Transmission Planner is indispensable for ensuring the reliability, efficiency, and sustainability of the electric grid. Colorado Springs Utilities is seeking an Electrical Engineer III - Transmission Planner to support a variety of critical engineering projects related to our transmission systems, in which you will perform an integral role! **Key Areas of Focus:** + Developing and maintaining long-range transmission plans to ensure system reliability and economic efficiency + Performing detailed analyses of the transmission system under various operating conditions to identify limitations + Coordinating with internal and external stakeholders to develop and implement effective solutions for transmission system issues + Preparing and presenting technical reports on transmission planning studies to management, regulatory bodies, and other stakeholders + Staying updated with the latest industry standards, regulatory requirements, and technological advancements related to transmission planning + Developing and managing project budgets, ensuring all projects are submitted to the design group for timely completion **Who You Are:** + Bachelor's degree in Electrical Engineering is **required** for this role + Relevant and progressively responsible engineering experience is valued, preferably in the bulk electric transmission systems and/or transmission planning + Possession of an Engineer-in-Training (EIT) certification is valued + Fundamental understanding of electric power systems, preferable PSSe and TARA load flow tools PHYSICAL REQUIREMENTS/WORKING CONDITIONS: + Exerts up to 10 lbs. of force occasionally and/or small amount of force frequently to lift, carry, push, pull, or otherwise move objects, including the human body. Sedentary work involves sitting most of the time but may involve walking or standing for brief periods of time. Jobs are sedentary if walking and standing are required only occasionally, and all other sedentary criteria are met. + Positions in this class typically require talking, hearing, seeing and repetitive motions within an office working environment. **Who We Are...** Colorado Springs Utilities offers a 100-year reputation for providing electric, natural gas, water, and wastewater services to the Pikes Peak Region. As a municipal utility, our mission is to provide safe, reliable, and competitively priced utilities to our customers. Our employees are empowered through our community focus, safety culture, and commitment to investing in the educational, financial, and emotional well-being of our people. Our organizational values of Safety, People, Trust, Responsibility, Collaboration, and Continuous Improvement, serve as our guiding principles and foundation of our culture. **Our Commitment to Our Employees...** Our people are the heart and soul of Colorado Springs Utilities. They keep the lights on, gas flowing, water coming in, and wastewater leaving. We do not just say people are important - we prove it! That's why we are honored to invest in protecting the health and financial security of our employees and their families through our rich benefits program. + Time Off - Because everybody needs time off to recharge + Vacation - New employees accrue 13 days of paid time off to start, while our more tenured employees accrue 24 days per year + Personal Leave -3 days per year of personal leave + Paid Holidays -12 paid holidays per year + Sick Leave - Accrue 12 days of sick leave annually for those days when you or a family member is feeling under the weather + Vacation Buy - Purchase up to 40 hours of additional vacation time + Pension Plan - Looking forward to a comfortable lifestyle once you're done working? The Colorado Public Employees' Retirement Association (PERA) provides you with retirement benefits and peace of mind when you retire + Medical - Select from three comprehensive medical plans, starting at $0 per month. Employees also enjoy access to a Health Savings Account (HSA) and Flexible Spending Account (FSA). (effective the 1st of the month following your start date) + Wellness Program - Voluntary wellness program that allows you and your spouse to each earn up to $500 to use towards healthcare expenses, $100 in Visa gift cards, and up to $400 in gym membership reimbursements + Dental - Select from two dental plans, with in-network PPO preventive care covered at 100% and access to orthodontia coverage (effective the 1st of the month following your start date) + Vision - Voluntary plan that covers full vision care services and discounts on LASIK eye surgery (effective the 1st of the month following your start date) + Retirement Saving Programs - Supplement your pension plan with voluntary retirement programs such as the PERAPlus 401(k) and MissionSquare's Roth IRA and 457 plans + Disability Coverage - Short-Term (STD) and Long-Term Disability (LTD) insurance available for purchase (effective the 1st of the month following your start date) + Employee Assistance Program (EAP) - Makes the going a little easier by aiding with mental health, stress management, work-life balance, financial and legal matters, and much more + Long-Term Care Insurance (LTC) - Whether it's due to an accident or a serious illness, LTC insurance is available for purchase to help you and your loved ones (effective the 1st of the month following your start date) + Life Insurance - Company-paid life insurance and supplemental coverage available (effective the 1st of the month following your start date) + Tuition Reimbursement - Employees are eligible to receive up to $5,250 annually for Tuition Reimbursement + Qualifying Public Service Employer - Payments made towards student loans may qualify for the Public Service Loan Forgiveness Program **_ATTENTION_** **_:_** + _All positions will be posted for a minimum of 5 calendar days._ + _Starting pay will be determined within the posted pay range based on the experience, education, and training of the successful candidate; if there is a single pay rate posted, the job starts at that rate._ + _Colorado Springs Utilities does not sponsor work visas of any kind, including H-1B, TN, or F-1 student visas (with or without OPT or STEM work authorization), or any other employment-based visas._ **_All eligible applicants must be authorized to work in the United States and work authorization must not be based on any work visa._** **Colorado Springs Utilities is an Equal Employment Opportunity/Affirmative Action employer.** Colorado Springs Utilities is committed to the principles of Affirmative Action and Equal Opportunity in accord with Vietnam Era Veterans Readjustment Assistance Act, 38 U.S.C. § 4212, as amended (VEVRAA), and § 503 of the Rehabilitation Act of 1973, as amended (§ 503). In addition, no person shall be unlawfully discriminated against because of race, color, creed, national origin or ancestry, sex (including pregnancy, gender identity, gender expression, and sexual orientation), age, religion, veteran status, disability, genetic information, marital status, or any other basis protected under state or federal law. Human Resources shall assure Colorado Springs Utilities' benefits, classification, compensation, employee development, employee relations, and employment programs, conform to current legal and regulatory requirements and the provisions of Colorado Springs Utilities' Affirmative Action Plan in accordance with VEVRAA and § 503. **Accessibility Accommodations** . If you are an individual with a disability or a disabled veteran who is unable to use our online tools to search and apply for jobs, you may request a reasonable accommodation by contacting us at accessibility@csu.org or by calling ************. This option is reserved for individuals who are unable to use or require assistance with the online tools as the result of a disability and is not intended for other purposes. **E-Verify and Right to Work Notice** . Federal law requires all employers to verify the identity and employment eligibility of all persons hired to work in the United States. Colorado Springs Utilities participates in E-Verify. For more information on your rights and responsibilities as an applicant, please visit: **************************************************************************** . If you have a legal right to work in the United States, there are laws to protect you against discrimination in the workplace. You should know that no employer can deny you a job or fire you because of your national origin. Unless mandated by law or government contract, employers cannot require you to be a U.S. Citizen or permanent resident or refuse any legally acceptable documents. If any of these things have happened to you, you may have a valid charge of discrimination that can be filed with the OSC. Contact the OSC for assistance in your own language. Call **************. TDD for the hearing impaired is **************. In the Washington, D.C., area, please call ************, TDD ************ Or write to: U.S. Department of Justice Office of Special Counsel NYA 950 Pennsylvania Ave., N.W. Washington, DC 20530. **Have a question?** If you have a question about a position or need assistance from a recruiter, email us at ********************* or call ************. Job Type: Engineering/Engineering Support