Controls engineer jobs in Fresno, CA - 30 jobs

If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time. At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates. Requisition ID: 76210 Job Title: PCB/RF Design Engineer If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high-performance analog semiconductors whose solutions are powering the wireless networking revolution. Through our broad technology expertise and one of the most extensive product portfolios in the industry, we are Connecting Everyone and Everything, All the Time. At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together are changing the way the world communicates. Responsibilities * System level estimation of RF component impacts to gain, return loss, attenuation, isolation. noise figure and linearity. * Ability to do initial layout floor-planning using Cadence Allegro. * Electro-magnetic simulation of ATE solution RF transmission lines to evaluate RF line performance using Ansys HFSS. * Full circuit path simulation using Keysight Advanced Design System (ADS) to evaluate RF path s-parameters of combined layout and components. * Continuous improvement in ATE measurement capabilities and accuracy. * Feasibility support for new test requests. Required Experience and Skills * Bachelors degree in electrical engineering or related field with 8+ years of RF design and simulation (MS plus 6 years or PhD plus 3 years also acceptable) * Background of RF, analog or mixed signal designs. * Background in RF, analog or mixed signal system analysis techniques. * Background in RF design software such as Keysight Advanced Design System (ADS) and/or Ansys HFSS. * Demonstrated strong analytical and problem-solving skills. * Proven ability to work in teams. * Excellent communication skills. * Strong time management skills that enable on-time project completion. * Ability to work effectively in a fast-paced and rapidly changing environment. #LI-SJ1 The typical base pay range for this role across the U.S. is currently USD $114,400 - $220,200 per year. Starting base pay will depend on relevant experience and skills, training and education, business needs, market demands, the ultimate job duties and requirements, and work location. Skyworks has different base pay ranges for different work locations in the U.S. Benefits include access to healthcare benefits (including a premium-free medical plan option), a 401(k) plan and company match, an employee stock purchase plan, paid time off (including vacation, sick/wellness, parental leave), among others. Employees are eligible to participate in an incentive plan, and certain roles are also eligible for additional awards, including recognition and stock. These incentives and awards are based on individual and/or company performance. Skyworks is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Skyworks strives to create an accessible workplace; if you need an accommodation due to a disability, please contact us at accommodations@skyworksinc.com.

Abbott is a global healthcare leader that helps people live more fully at all stages of life. Our portfolio of life-changing technologies spans the spectrum of healthcare, with leading businesses and products in diagnostics, medical devices, nutritionals and branded generic medicines. Our 114,000 colleagues serve people in more than 160 countries. **_MAIN PURPOSE OF ROLE_** Supports production and process development from concept through sustained manufacturing of FDA regulated products. Responsible for production support, maintenance support, performing process development and qualification, equipment specification, acquisition, installation, and integration. **_MAIN RESPONSIBILITIES_** -Interface with internal customers to provide controls support for manufacturing and testing equipment -Support the development and maintenance of automated equipment -Evaluate process and design alternatives based on Design for Manufacturability principles. -Establish knowledge base of new developments in manufacturing and design technologies. -Interface with vendors on procuring materials, services, and equipment -Assemble and evaluate automated equipment -Establishes machine specifications. -Support equipment validations -Support all Company initiatives as identified by management and in support of Quality Management Systems (QMS), Environmental Management Systems (EMS), and other regulatory requirements. -Complies with U.S. Food and Drug Administration (FDA) regulations, other regulatory requirements, Company policies, operating procedures, processes, and task assignments. Maintains positive and cooperative communications and collaboration with all levels of employees, customers, contractors, and vendors. -Evaluates machine logic, electromechanical systems and process controls to troubleshoot equipment and identify process improvement opportunities. May conduct design analysis on components and/or assemblies to assist in the development process by ensuring designs are cost efficient, manufacturable, and reliable. -Communicates with the other engineering personnel to coordinate the interrelated design and assure project completion. -May act as internal consultant providing technical guidance on most complex projects. -This is a non-supervisory position. -Coordinate and participate in equipment Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT), etc. -Conceptualize, design, and build complete solutions for novel or complex problems; explore multiple alternatives. - Programming and integration of controls hardware and software into new and existing manufacturing equipment. -Analyzes current equipment for process suitability and provides detailed plans for improvement -Creates and revises manufacturing documents, specifications, standard operating procedures (SOPs), safety instructions, validation protocols, risk assessments, and procedures and other technical documents to ensure compliant, efficient and safe procedures. -Lead cross functional project teams and coordinate activities -Analyzes, creates and implements manufacturing and/or business process improvements that increase capacity, reduce lead-time, reduce work in process and improve the quality, cost and delivery performance of Abbott. -Investigate and resolve existing equipment operating, reliability, and yield issues and implement corrections or modifications to ensure systems operate within qualified parameters. Create and execute Quality System records to ensure equipment performance history is properly documented. **_QUALIFICATIONS_** -Hands on working knowledge of automation control software and PLC programming and troubleshooting. - Strong knowledge and experience in industrial robotics, Servos, Pneumatic systems, sensors, and Machine Vision systems. -Familiarity with qualification and regulatory requirements in the medical device industry, including Design Review, User Requirement Specifications (URS), IQ/OQ/PQ, etc. Associates Degree (± 13 years) with Related with 10-15 years relevant experience. Bachelors Degree Engineering **EXPERIENCE** Minimum 5 years 5-10 years as automation controls engineer. Must have experience with designing and fabricating automated production equipment for low and high volume processes. Good communication skills and the ability to interact with all levels of the organization. Experience with general automation and control concepts along with machine vision systems, robotics, and PLC software programming. Experience working in a broader enterprise/cross-division business unit model preferred. Ability to work in a highly matrixed and geographically diverse business environment. Ability to work within a team and as an individual contributor in a fast-paced, changing environment. Ability to leverage and/or engage others to accomplish projects. Strong verbal and written communications with ability to effectively communicate at multiple levels in the organization. Multitasks, prioritizes and meets deadlines in timely manner. Strong organizational and follow-up skills, as well as attention to detail. Ability to travel, including internationally. The base pay for this position is $90,000.00 - $180,000.00. In specific locations, the pay range may vary from the range posted. An Equal Opportunity Employer Abbot welcomes and encourages diversity in our workforce. We provide reasonable accommodation to qualified individuals with disabilities. To request accommodation, please call ************ or email ******************

What You'll Do: The Traffic Control Plan Designer will have experience generating traffic control plans. The Designer will develop traffic signal design, traffic analysis, signing and pavement marking designs from general instruction to a detailed finish product. The Designer should have a full understanding of file structure, specifications, industry and client standards related to assigned projects. This is a Hybrid/primarily remote role that requires the ideal candidate to live within San Jose, Santa Cruz, Fresno, Sacramento, Santa Rosa, or the Bay Area. Currently requires quarterly in-person meetings but travel requirements are subject to change. Required Qualifications * AutoCAD Design Experience * 2+ years drafting traffic control plans using AutoCAD * Basic knowledgeable in MUTCD/CATTCH codes and regulations Preferred Qualifications: * An Associates of Applied Science degree (AAS) in design and drafting technology or a related field * Experience with California DOT and County design policies and procedures * Basic understanding of CalTrans Traffic Control Plans Not quite right for you? For a full listing of all our openings, please visit us at: ******************************* Who We Are: ENTRUST Solutions Group, an ENR Top 100 company, is a community of people, 3,000+ strong, who are committed to our clients and each other. We provide comprehensive and dependable engineering, consulting, and automation services to gas and electric utilities, telecommunication service providers, pipeline operators, and industrial companies. In return for top talent, ENTRUST Solutions Group offers: * Generous paid time off and benefits * 401(k) retirement program with a company match * Career development programs * Tuition reimbursement * Flexible work schedule To learn more about ENTRUST Benefits and Culture, please visit our company LinkedIn page and follow us at: ****************************************************** Benefits & Salary: This position is an Exempt position, and pays between $55k-90K, annually depending on experience. Benefits offered include company sponsored medical, dental, vision, and 401(k) plan with company match. Also offered are tuition reimbursement, voluntary life, disability, critical illness, accident and hospitalization plans. HSA or FSA medical accounts and FSA dependent care and transportation/parking accounts are also available. These benefits are subject to employee contribution amounts generally set annually. * Full time employees are eligible to earn PTO hours. * May be eligible for discretionary bonus as determined by the company ENTRUST Solutions Group is proud to be an Equal Employment Opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Headhunters and recruitment agencies may not submit resumes/CVs through this website or directly to managers. ENTRUST does not accept unsolicited headhunter or agency resumes and will not pay fees to any third-party agency or company that does not have a signed agreement with ENTRUST Solutions Group. #LI-GP1

**What You'll Do:** The Traffic Control Plan Designer will have experience generating traffic control plans. The Designer will develop traffic signal design, traffic analysis, signing and pavement marking designs from general instruction to a detailed finish product. The Designer should have a full understanding of file structure, specifications, industry and client standards related to assigned projects. This is a Hybrid/primarily remote role that requires the ideal candidate to live within San Jose, Santa Cruz, Fresno, Sacramento, Santa Rosa, or the Bay Area. Currently requires quarterly in-person meetings but travel requirements are subject to change. **Required Qualifications** + AutoCAD Design Experience + 2+ years drafting traffic control plans using AutoCAD + Basic knowledgeable in MUTCD/CATTCH codes and regulations **Preferred Qualifications:** + An Associates of Applied Science degree (AAS) in design and drafting technology or a related field + Experience with California DOT and County design policies and procedures + Basic understanding of CalTrans Traffic Control Plans **Not quite right for you? For a full listing of all our openings, please visit us at:** ******************************* **Who We Are:** ENTRUST Solutions Group, an ENR Top 100 company, is a community of people, 3,000+ strong, who are committed to our clients and each other. We provide comprehensive and dependable engineering, consulting, and automation services to gas and electric utilities, telecommunication service providers, pipeline operators, and industrial companies. **In return for top talent, ENTRUST Solutions Group offers:** + Generous paid time off and benefits + 401(k) retirement program with a company match + Career development programs + Tuition reimbursement + Flexible work schedule **To learn more about ENTRUST Benefits and Culture, please visit our company LinkedIn page and follow us at:** ****************************************************** Benefits & Salary: This position is an Exempt position, and pays between $55k-90K, annually depending on experience. Benefits offered include company sponsored medical, dental, vision, and 401(k) plan with company match. Also offered are tuition reimbursement, voluntary life, disability, critical illness, accident and hospitalization plans. HSA or FSA medical accounts and FSA dependent care and transportation/parking accounts are also available. These benefits are subject to employee contribution amounts generally set annually. + Full time employees are eligible to earn PTO hours. + May be eligible for discretionary bonus as determined by the company **_ENTRUST Solutions Group is proud to be an Equal Employment Opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law._** **_Headhunters and recruitment agencies may not submit resumes/CVs through this website or directly to managers. ENTRUST does not accept unsolicited headhunter or agency resumes and will not pay fees to any third-party agency or company that does not have a signed agreement with ENTRUST Solutions Group._** **_\#LI-GP1_** Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Hiring Immediately! **Coatings Automation Technician, Sylmar, CA Pay: $40.00 per hour Shift: Day 6:00am - 2:30pm** Disclaimer: We ask that you have the use of, or access to, information subject to the International Traffic in Arms Regulations. Only U.S. Citizens, Green Card holders and political asylees or refugees are eligible to apply. All applicants must provide one of the following forms of identification as part of their application: (1) Passport, (2) Birth Certificate, (3) Certificate of Naturalization (USCIS Form N-550 or N-570), or (4) Permanent Resident Card (USCIS Form I-551. As a Coatings Automation Technician you will be a crucial part of our operations, ensuring that a quality product is available to our customers when they need them. Your work will directly affect people's lives! Primary Responsibilities Repair, install, troubleshoot, and maintain automated manufacturing and electrical systems, including PLC-controlled equipment, HMIs, drives, sensors, and control panels Support industrial robots, vacuum chambers, casting systems, UV curing systems, and automated material handling equipment Perform corrective and preventive maintenance on automation, electrical, mechanical, pneumatic, and hydraulic systems Install, calibrate, and test electrical infrastructure, control systems, and production equipment Troubleshoot electrical malfunctions; inspect circuits and wiring for proper shielding, grounding, safety, and efficiency Support equipment startups, upgrades, and continuous improvement initiatives Accurately document work performed, failures, and parts usage in the CMMS Qualifications High school diploma or GED required; technical degree or certification preferred 1+ years of experience in automation, industrial controls, or manufacturing maintenance Ability to troubleshoot complex electrical and mechanical systems Working knowledge of PLCs, electrical schematics, and industrial automation systems Robotics experience preferred Experience with coatings automation equipment (e.g., vacuum chambers, robotics, casting machines) a plus Ability to lift/carry up to 50 lbs Ability to push/pull 51 lbs or more Ability to stand for extended periods and work around production equipment About us: Here at PPG, we make it happen, and we seek candidates of the highest integrity and professionalism who share our values, with the commitment and drive to strive today to do better than yesterday - everyday. PPG: WE PROTECT AND BEAUTIFY THE WORLD™ Through leadership innovation, sustainability and color, PPG helps customers in industrial, transportation, consumer products, and construction markets and aftermarkets to enhance more surfaces in more ways than does any other company. To learn more, visit *********** and follow @PPG on Twitter. The PPG Way Every single day at PPG: We partner with customers to create mutual value. We are "One PPG" to the world. We trust our people every day, in every way. We make it happen. We run it like we own it. We do better today than yesterday - everyday. PPG provides equal opportunity to all candidates and employees. We offer an opportunity to grow and develop your career in an environment that provides a fulfilling workplace for employees, creates an environment for continuous learning, and embraces the ideas and diversity of others. All qualified applicants will receive consideration for employment without regard to sex, pregnancy, race, color, creed, religion, national origin, age, disability status, marital status, veteran status, sexual orientation, gender identity or expression. If you need assistance to complete your application due to a disability, please email ******************. PPG values your feedback on our recruiting process. We encourage you to visit Glassdoor.com and provide feedback on the process, so that we can do better today than yesterday. Benefits will be discussed with you by your recruiter during the hiring process. #IQ

Job Title: Electrical and Controls Engineer Company: Munters Corporation About Us: Munters is a global leader in climate solutions for mission-critical processes. We offer innovative, efficient and sustainable solutions for customers in industries where controlling indoor humidity, temperature and energy efficiency is mission-critical. Climate control systems often account for a large percentage of the energy consumption in many of our customers' operations. With an optimal climate system, we can help them to more efficiently use energy or water resources, and thereby reduce their climate and environmental impact. Sustainability is an important part of Munters' business strategy and value creation. We pride ourselves on fostering a dynamic and inclusive work environment where interns are valued members of the team and are given meaningful projects to work on. JOB DESCRIPTION: We are a leading manufacturer of innovative data center cooling solutions, dedicated to delivering high-performance, energy-efficient systems to support the world's most advanced data centers. With a global presence and multiple manufacturing facilities, we are committed to operational excellence and cutting-edge technology to meet the evolving demands of the industry. As a member of the Munters Electrical Engineering team, you will hold an important role in developing and supporting custom and standard HVAC solutions for Data Centers and other commercial clients. This role offers the chance to design, interact with, and troubleshoot innovative systems that directly support mission-critical facilities, with exposure to the latest technologies in energy efficiency and automation. This role is based in the Munters facility in Selma, Texas and reports to the Electrical Engineering Manager located in Daleville, Virginia. RESPONSIBILITIES: Maintain standard and custom air handler solutions by generating schematic drawings, validating components, and preparing equipment documentation. Provide, troubleshoot, and maintain control interfaces for electrical components such as motors, fans, VFDs, and other electrical equipment to meet project requirements. Provide technical support to manufacturing teams for electrical and controls-related issues. Collaborate with manufacturing teams to improve build processes, wiring practices, and testing methods for electrical and control systems. Support new product development with conceptual designs and layouts, as needed. Contribute to continuous improvement and cost reduction activities through improved product design/design for manufacturing. Prepare detailed technical documentation to support varying levels of technical and non-technical personnel. EDUCATION REQUIREMENTS: Minimum B.S. in Electrical Engineering or Electrical Engineering Technology. SKILLS: Proficiency in control system theory. Demonstrated problem solver & team player. Detail-oriented with a strong commitment to quality, accuracy, and project completion. Effective communication skills, both written and oral. Hands-on experience with sensors, actuators, VFDs, and various industrial communication systems. Knowledge of Building Management Systems (BMS/BAS) and networking. Experience developing or improving work instructions, testing protocols, or manufacturing processes. PREFERRED QUALIFICATIONS: Experience in HVAC systems design and manufacturing, ideally with expertise in data center cooling technologies (e.g., Chillers, CRAC/CRAH units, liquid cooling systems). 3+ years in electrical or controls engineering preferred. Knowledge of applicable safety and compliance standards (IEC, NFPA, UL, etc.). Authorized to work in the U.S. for any employer. TRAVEL REQUIREMENTS Minimal travel requirements (typically less than 25%) primarily for project support, testing, and collaboration with regional teams. BENEFITS: Competitive Salary Comprehensive health, dental, and vision insurance plans Generous vacation and paid time off 401K retirement savings plan with employer matching Professional development opportunities, including tuition reimbursement, and conference attendance Company-sponsored social events and team-building activities State-of-the-art equipment and tools to support your work Equal Opportunity Employer: We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. All offers are contingent on a pre-employment drug test and background check, as applicable for the position.

Controls Technician - Building Automation (BAS) - Fresno, CA - $42-$60/hr + OT + Company Vehicle About the Opportunity A well-established Building Automation and HVAC Controls contractor is seeking a skilled Controls Technician to support commercial BAS/DDC installations, service, and commissioning throughout the Fresno and Central Valley region. This role is ideal for a technician experienced in building automation who enjoys field work, problem-solving, and working across a mix of commercial, healthcare, education, industrial, and municipal facilities. Position Details Title: Controls Technician - Building Automation Location: Fresno, CA (Central Valley territory) Employment Type: Full-Time Compensation & Benefits Hourly Rate: $42.00 - $60.00/hr (Depending on Experience) Overtime: Available Company Vehicle & Gas Card: Included Medical, Dental, and Vision Insurance 401(k) Retirement Plan with Company Match Paid Vacation & Holidays Company Laptop, Phone, Tools, and PPE About the Role The Controls Technician will be responsible for the installation, start-up, programming support, troubleshooting, and commissioning of Building Automation Systems across a wide variety of commercial environments. You will work closely with mechanical contractors, electricians, engineers, and project managers to ensure systems are installed and operating to specification. Key Responsibilities Install and commission DDC/BAS control systems for HVAC applications Troubleshoot hardware, network, and control issues in the field Perform point-to-point checkout, system testing, and functional verification Install and terminate sensors, controllers, actuators, and communication wiring Assist in loading, editing, or tuning BAS programs and graphics Work with contractors and end users during equipment start-up and commissioning Interpret wiring diagrams, control schematics, and sequences of operation Document work performed and maintain clear communication with supervisors and customers Ideal Candidate Profile Experience as a BAS Controls Technician or similar HVAC controls role Strong hands-on skills with BAS/DDC device installation and troubleshooting Working knowledge of BACnet, Modbus, or LonWorks protocols Ability to read and interpret mechanical drawings and control prints Comfort working in commercial, industrial, and government facilities Strong communication and customer-facing skills Valid California driver's license and clean driving record Preferred Technical Experience Experience with platforms such as Tridium Niagara, Distech, Automated Logic, Siemens, or Johnson Controls Knowledge of commercial HVAC equipment including RTUs, VAVs, AHUs, chillers, and boilers Prior commissioning experience on new construction or retrofit projects How to Apply If you have hands-on Building Automation experience and are looking for a long-term opportunity in the Fresno area with strong compensation and career growth, please submit your application through this posting. Qualified candidates will be contacted to discuss next steps.

We are seeking a licensed Electrical Engineer (PE) with strong design expertise and project management experience to lead federal infrastructure, water/wastewater and industrial projects. This role blends hands-on engineering with leadership responsibilities, making it ideal for someone who thrives in both technical and client-facing environments. The position is hybrid and can be based in Dallas, TX; Houston, TX; Denver, CO; Chicago, IL; Los Angeles, CA; Irvine, CA; Concord, CA; Carlsbad, CA; or Phoenix, AZ. This position will support federal project work for clients that require U.S. Citizenship. As a Senior Professional Electrical Engineer, you will: Lead the design of medium and low voltage distribution systems, including substations, switchgear, and standby generation systems Perform electrical calculations and power system analyses using SKM Power Tools, ETAP or similar software Design lighting, controls, and similar low-voltage systems Develop electrical plans and specifications for complex projects (e.g., federal, water/wastewater, industrial, transportation) Conduct site investigations and coordinate with clients, utilities, and code officials Review shop drawings and support construction services Prepare cost estimates using RS Means or similar tools Ensure compliance with NEC, NFPA 820, and other relevant codes and standards Supervise and mentor junior staff and collaborate with multidisciplinary teams Define project scope, schedules, budgets, and objectives using lessons learned Monitor project risks and implement mitigation strategies Manage client billing, subcontractor/vendor payments, and ensure profitability Develop and implement project resource plans, including staffing and procurement Provide coaching and performance feedback to project staff Build and maintain strong client relationships through quality project execution Identify opportunities for change orders and repeat business **Job Title:** Electrical Engineer **Group:** ISO **Employment Type:** Regular **Minimum Qualifications:** Bachelor's degree in Electrical or Electronic Engineering, or Electrical Technology or related discipline. Professional engineering (PE) license. 10 years of related experience. Equivalent additional directly related experience will be considered in lieu of a degree. Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. **Preferred Qualifications:** Experience designing medium and low-voltage power systems for water, wastewater, industrial, federal, and transit facilities Familiarity with NEC, NFPA, NESC, IEEE, UFC, and other relevant codes and standards Hands-on experience with power system analysis using SKM Power Tools and/or ETAP PMP (PMI) certification is required (within 12 months of hire). **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 5% **Assignment Category:** Fulltime-Regular **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** Strong foundation in electrical engineering design principles and project management methodologies Proficient in power system analysis tools (SKM, ETAP), and Microsoft Office (Word, Excel) Excellent communication, interpersonal, and presentation skills for engaging with teams, clients, and vendors Well-versed in federal, state, and local regulations, with the ability to manage multiple priorities and high-volume workflows Demonstrates strong organizational skills and understanding of project goals, risks, and strategies **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $104,229 **Pay Range Maximum:** $182,374 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Hybrid Work Options may be considered for successful candidate. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Facilities Electrical Engineer Job Code: 31313 Job Location: Canoga Park, CA Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: The Aerojet Rocketdyne Segment of L3Harris is currently seeking an experienced Facilities Electrical Engineer for our Space Propulsion and Power Systems facility in Canoga Park, CA. This position will provide Electrical Engineering to support Construction, Equipment Installation Projects, as well as Equipment & Infrastructure Maintenance Technical Support; and manage Facilities Capital Projects for Electrical and/or Manufacturing & Process equipment installations. These include Engineering and Design for the installation and modifications of Manufacturing, Process and Lab equipment, Office Areas, HVAC & Control systems, Electrical distribution, Emergency Power and Green Energy systems, Alarms, Public Address. Essential Functions: + Lead and support Facilities Projects in the development of Electrical Engineering designs, calculations, specifications, and cost estimates for Equipment Acquisitions, Facility renovations, and Construction projects. + Interface with A&E firms and Construction Contractors. + Review and approve construction documents and contractor submittals. + Maintain as-built drawings and records. + Interpret and apply codes. + Support Maintenance staff in trouble shooting and technical issues as required and make recommendations for planned system refurbishment or replacement. + Manage facilities projects: including internal customer interface, external contractor interface, leading Project Teams, developing project scope, schedule, cost, generating and reviewing/approving work authorizations and invoices for payment. Qualifications: + Bachelor's degree and minimum of 4 years of prior relevant experience or Graduate Degree and a minimum of 2 years of relevant experience. In lieu of a degree, a minimum of 8 years of prior related electrical engineering experience. Preferred Additional Skills: + High level of Safety and Customer focus. + Strong skills in teamwork and the ability to communicate effectively with peers, management, customer personnel, outside agencies, Contractors and others in a dynamic changing environment. + Ability to support several projects and competing priorities simultaneously. + Knowledgeable of NEC and other applicable Electrical Building codes + Knowledgeable of applicable industry standards (UL, Title 24, Lighting Standards, etc) + Ability to work in a combination of indoor and outdoor environments (hot, cold, wet, humid conditions) with a varied amount of walking, standing, sitting, climbing (i.e. ladders, stairs, scaffolding, ramps), as well as a standard office setting and use standard office equipment, including a computer. + Proficient in AutoCad, Microsoft Word, Excel, Power Point, & MS Project + California State Licensed Professional Engineer - Electrical Engineering + Arc-flash power systems studies highly desirable In compliance with pay transparency requirements, the salary range for this role in Colorado State, Hawaii, Illinois, Maryland, Minnesota, Vermont and New York State is $68,000- $126,000. For California, Seattle, Washington D.C., Maryland Greater Washington D.C. area, the city of Denver, Washington State and New York City, the salary range for this role is $77,500- $144,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English (******************************************************************************************** or Spanish (******************************************************************************************** . For information regarding your Right To Work, please click here for English (****************************************************************************************** or Spanish (******************************************************************************************** .

Job Purpose The Controls Engineer is an exempt, professional engineering role responsible for the design, programming, integration, and continuous improvement of complex automation and control systems that support Food & Beverage manufacturing operations. The position applies advanced knowledge of electrical engineering, industrial controls, and automation to develop control strategies, optimize system performance, and ensure safe, reliable, and efficient production. The Controls Engineer exercises independent judgment in planning and executing automation projects, establishing technical standards, and resolving high-level control system issues that impact plant performance, quality, and safety. Essential Job Functions Controls Design, Programming, and Standards Design, develop, modify, and maintain PLC, HMI, and SCADA applications (including AllenBradley and Wonderware platforms) for new and existing production systems. Create and implement control logic, safety interlocks, sequencing, and alarming strategies that support safe, efficient, and highly reliable operations. Establish and maintain controls standards, programming conventions, and documentation practices for the facility. Automation System Integration Engineer and integrate sensors, instrumentation, motors/drives, vision systems, robotics, and other automation components into production lines and utilities. Design and configure industrial networks (e.g., EtherNet/IP, Profinet) to ensure robust, secure, and highavailability communication between devices and systems. Collaborate with crossfunctional stakeholders (Operations, Maintenance, Quality, Safety, IT, and OEMs) to define requirements and implement automation solutions that meet business needs. Advanced Troubleshooting and Technical Leadership Serve as the subject matter expert for complex electrical, instrumentation, networking, and control system issues, providing guidance to maintenance and operations teams. Use structured problemsolving, data analysis, and rootcause methodologies to diagnose recurring or highimpact automation problems and implement sustainable corrective actions. Provide technical leadership during critical breakdowns or production interruptions, including directing internal and external resources as needed. Commissioning, Projects, and Continuous Improvement Lead the controls scope of capital projects, including concept development, design reviews, vendor coordination, FAT/SAT, commissioning, and validation of new equipment and system upgrades. Develop project plans, estimates, and schedules for automation initiatives and ensure delivery against cost, scope, quality, and timing expectations. Analyze production and system performance data to identify opportunities to increase uptime, reduce downtime, improve process control, enhance operator usability, and strengthen safety performance. Recommend and implement control system modifications and technology upgrades that drive longterm reliability and operational excellence. Documentation, Compliance, and Governance Develop and maintain accurate and current electrical schematics, wiring diagrams, control logic diagrams, network architecture drawings, change logs, and versioncontrol records. Ensure that all control system changes follow established managementofchange processes and align with internal standards, regulatory requirements, and applicable codes. Support internal and external audits by providing engineering documentation, technical justifications, and subject matter expertise related to automation and control systems. Qualifications 5+ years of experience in a Controls Engineering position or similar automation/controls-focused role. Engineering experience in Food & Beverage manufacturing is required. Bachelor's degree in electrical engineering or related discipline. Proficiency with Allen-Bradley (Studio 5000, RSLogix, FactoryTalk). Experience with PLC and HMI platforms. Strong experience with Wonderware SCADA systems. Industrial networking experience (EtherNet/IP, Profinet, switches, VLANs). Strong electrical and instrumentation troubleshooting skills. Ability to design and interpret electrical schematics, P&IDs, and wiring diagrams. Project management skills for planning, executing, and documenting automation projects. Bilingual (Spanish fluency) strongly preferred. Must be able to work a flexible schedule (on call) as needed. Must be legally authorized to work in the United States without restriction.

Job Type: Full-time Work Category: Onsite Sponsorship: Not Available Compensation: $43.7 - $58.99 Gallo Privacy Policy We are GALLO We're a family-owned company with a 90+ year legacy, that's consistently recognized as a Glassdoor "Best Places to Work." We have 130+ brands in our total alcohol beverage portfolio including wine, malt, spirits, and ready-to-drink beverages. We're home to the #1 wine and spirits brands in the U.S. - Barefoot Wine & High Noon and are the official sponsors of the NFL, NHL, UFC, and PGA of America. View our Corporate Values and Mission Statement here. * SHIFT - Dayshift, with flexibility for offshifts during harvest months A Taste of What You'll Do Join Gallo as a Controls Technician at our Fresno winery and take a hands-on role maintaining, installing, and troubleshooting plant instrumentation and control systems with minimal supervision. You'll apply and expand your knowledge of PLC and HMI programming, MES, Historian tags, and Kepware while diagnosing communication networks (DeviceNet, Data Highway, CAN I/O) and using electrical test equipment to keep processes running reliably. This role executes minor PLC/HMI projects, equipment upgrades, parameter downloads, and instrument calibration while recommending and validating improvements to equipment and control strategies. Some shift work may be required. As a collaborative problem-solver, you'll work cross-functionally with operations, maintenance, and engineering to gather and analyze technical and cost data, present test results, and support capital projects or product commercialization. You'll identify technical issues, propose practical solutions, manage project goals and timelines, and communicate status and roadblocks clearly. Safety, GMP, quality, and environmental compliance are integral to every task, and when accountable for others' work you'll help ensure their understanding and adherence to standards. We encourage applicants with strong troubleshooting skills, PLC/HMI experience, and a mindset for continuous improvement-whether you come from formal training, a trade background, or related industry experience. If you're ready to bring your PLC troubleshooting expertise to influence process performance, support cross-functional teams, and grow your controls career in a supportive environment, we'd love to hear from you. Apply today. What You'll Need * Bachelor of Science Degree plus 1 year of working with PLC controls, logic circuits, pneumatic and electrical equipment experience; OR 2 years technical degree in electrical technology plus 3 years of experience working with PLC controls, logic circuits, pneumatic and electrical equipment; OR High school diploma or State-issued equivalency certificate plus 5 years of experience working with PLC controls, logic circuits, pneumatic and electrical equipment. * Required to climb stairs and ladders; required to conduct work at heights. * Knowledgeable of Electrical Safety procedures. * May be required to work a rotating shift/schedule (e.g., day, swing, graveyard, 5x8, 4x10) as well as weekends and overtime. * Skilled in reading, comprehending, interpreting and executing simple instructions, short correspondence and memos. * Skilled in writing simple correspondence. * Skilled in adding, subtracting, multiplying and dividing using whole numbers. * Required to travel to company offices, sites, and/or meeting locations for onboarding, training, meetings, and events for development, department needs, and business delivery up to 5% of the time, with or without reasonable accommodation. This may be in addition to travel requirements, if applicable, as listed in this . * Required to be 18 years or older. This may be in addition to other age requirements, if applicable, as listed in this . How You'll Stand Out * Bachelor of Science Degree plus 3 years of working with PLC controls, logic circuits, pneumatic and electrical equipment experience; OR 2 years technical degree in electrical technology plus 5 years of experience working with PLC controls, logic circuits, pneumatic and electrical equipment; OR High school diploma or State-issued equivalency certificate plus 7 years of experience working with PLC controls, logic circuits, pneumatic and electrical equipment. * Knowledge of pneumatics and hydraulics. * Knowledge of motion control and servo drive technology (software and hardware). * Experience developing FactoryTalkView applications for ME Station (PanelView+). * Experience configuring, maintaining, troubleshooting FactoryTalkDirectory (local) and RSLinx Professional. * Experience working with RSNetworx, able to configure industrial networks (ControlNet, DeviceNet, and EtherNet), * Knowledge of motor control and automated control circuits. * One or more years of demonstrated experience in one of the following areas: * CPG Manufacturing Systems (Filling, Labeling, Packaging, etc.) * Winery Manufacturing Systems (Fermentation, Piping, Filtration, etc.) * Control Systems (Rockwell, SCADA, PLC, Instrumentation) * Project Management * Glass Manufacturing Systems To view a full job description, please click here. Our Benefits & Perks We are committed to providing competitive compensation, perks, and a culture that supports your well-being. Benefits depend on your work category and may include medical and dental coverage, 401k plans, profit sharing, pet insurance, company holidays, access to an employee wine shop, and more! Additional information will be provided before your first interview. The Fine Print * The Company does not sponsor for employment-based visas for this position now or in the future. * Actual compensation paid within the range will be determined by factors such as the education, experience, knowledge, skills and abilities of the applicant, internal equity, and alignment with market data. In addition to the salary, this position may be eligible for bonuses, incentive plans, or participate in tasting room tip pools, as applicable. * This position will be based in the location(s) specified in the job posting and requires working on-site with no telecommuting option. You will be expected to live within a commutable distance. * It is the Company's policy for job postings to be open to internal candidates for a minimum of 5 days and to external candidates, if applicable, for a minimum of 3 days. Gallo's policy is to afford equal employment opportunities to all applicants and employees and not to discriminate on the basis of race, traits associated with race, including but not limited to, hair texture and protective hairstyles (such as braids, locks, and twists), color, national origin, ancestry, creed, religion, physical disability, mental disability, medical condition as defined by applicable state law (including cancer and predisposing genetic characteristics), genetic information, marital status, familial status, sex, gender, gender identity, gender expression, sexual orientation (actual or perceived), transgender status, sex stereotyping, pregnancy, childbirth or related medical conditions, reproductive health decision making, age, military or veteran status, domestic violence or sexual assault victim status, or any other basis protected by applicable law. Nor will Gallo discriminate based on a perception that an individual has any of the foregoing characteristics or is associated with a person who has, or is perceived to have, any of those characteristics. Gallo will comply with state and local laws prohibiting discrimination for lawful out-of-work behavior, such as off-duty use of cannabis away from the workplace (subject to federal and state law exceptions), the existence of non-psychoactive cannabis metabolites in hair, blood, urine, or other bodily fluids as determined by a drug screening test (subject to federal and state law exceptions). We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Gallo is committed to providing reasonable accommodation for candidates with disabilities in our recruiting process. If you need any assistance or accommodation due to a disability, please let us know at ************. Gallo is enrolled in the Department of Homeland Security's E-Verify program and will use the program to verify the employment eligibility of all newly hired employees as required. E-Verify Notice Right to Work Employee Polygraph Protection Act

THIS POSITION We are looking for an Assistant Electrical Engineer to join our growing team! As an Assistant Electrical Engineer, you will be responsible for supporting a team of technical professionals in the research, planning and design of infrastructure projects. RESPONSIBILITIES Conduct research and gather relevant information for project planning and design Prepare construction documents including drawings, details, quantities and technical specifications Perform quality control tasks to ensure deliverables satisfy scope and technical requirements Communicate with clients and agencies Participate in site visits to ensure conformance with design standards REQUIREMENTS Bachelor's degree (or in process) in Electrical Engineering Engineer-In-Training (EIT) certification preferred Experience with AutoCAD, Civil 3D, GIS, and other relevant software BENEFITS Medical (two PPO plan options) Dental Vision Paid Vacation Paid Sick Leave Paid Bereavement Paid Holidays Competitive Compensation 401(k) Plan with generous company contribution Certification Reimbursement Professional Membership Reimbursement Life / AD&D / LTD options Employee Assistance Program Flexible Spending Account Apparel Allotment Premium coffee/snack/drink assortment Frequent employee mingles and lunches Continuous Growth Opportunities Great people to work with! WHY SHOULD YOU APPLY You'll work on exciting projects, learn from talented professionals, gain technical expertise, and develop leadership skills that will take your career to the next level ADDITIONAL INFORMATION Relocation assistance will not be available for this position. Applicants must be fully authorized to work in the U.S. and physically be in the U.S. Please no calls, emails, or additional contact for inquiry. Our HR team will be in contact with you if we need additional information or wish to schedule a phone or personal interview with you. Blair, Church & Flynn is an equal opportunity employer and considers qualified applicants for employment without regard to race, gender, age, color, religion, disability, veteran status, sexual orientation, gender identity, or any other protected factor.

About Us We are a full-service HVAC, building automation, chiller, and retrofit contractor with a reputation for combining high-quality consulting services with customized energy solutions. Our integrated, single-source solutions include turnkey in-house capabilities with design assistance, as well as engineering applications and automated control systems. Essential Duties & Responsibilities Utilizes test equipment, meters, and one's mechanical and electrical abilities to fire boilers and related equipment to ensure proper operation prior to and during installation. Perform independent start-up of boiler and related equipment. Interpret various instructions furnished in written, oral, diagram, or schedule form. Assists the Service team in conducting field service calls to perform start-up, troubleshooting, or other service-related activities as needed. Perform basic electrical and mechanical repairs on boiler and auxiliary equipment. Communicates well to new and existing customers to determine the nature of boiler-specific problems, provide equipment training, explain services and operations, and provide engineering support. Completes required field service reports, which document work performed, nature of problem, hours worked, etc. Problem-solving and ability to address issues and concerns. Develops and maintains good customer relations and rapport. Look for new sales opportunities and equipment improvements. Promotes our products and services and associates favorably. Ability to use hand and power tools, combustion analyzers, and multimeters. May require some overnight travel and overtime. Must be punctual, flexible, trainable, and a self-starter. Able to think outside of the box and follow detailed directions. Qualifications High school diploma or general education degree (GED); at least four years related experience and/or training or equivalent combination of education and experience. Electrical and/or Mechanical Engineering studies preferred. Knowledge of electrical and mechanical systems in industrial steam and power plant operations and familiarity with electrical and mechanical testing equipment. Ability to communicate effectively with customers, vendors, contractors, sales personnel, and other shop & service employees. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute ratio and percent. Proficient in Microsoft Office and Google App programs and use of a tablet and/or smartphone. While performing the duties of this Job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee is frequently required to reach with hands and arms. The employee is occasionally required to walk, sit, climb, or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision and color vision. While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, extreme heat, and risk of electrical shock. The employee is occasionally exposed to moving mechanical parts, high, precarious places, and outside weather conditions. The noise level in the work environment is usually loud. #Mesa #LI-Mesa #LI-HVACjobs #LI-Onsite Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Geographic Disclosure Compensation Range: $48.41 - $65.49 per hour The hourly rate is determined by the CBA/rate sheet and test results. Benefits are provided through local labor union aligned with collective bargaining agreement.

About Us We are a full-service HVAC, building automation, chiller, and retrofit contractor with a reputation for combining high-quality consulting services with customized energy solutions. Our integrated, single-source solutions include turnkey in-house capabilities with design assistance, as well as engineering applications and automated control systems. Essential Duties & Responsibilities * Utilizes test equipment, meters, and one's mechanical and electrical abilities to fire boilers and related equipment to ensure proper operation prior to and during installation. * Perform independent start-up of boiler and related equipment. * Interpret various instructions furnished in written, oral, diagram, or schedule form. * Assists the Service team in conducting field service calls to perform start-up, troubleshooting, or other service-related activities as needed. * Perform basic electrical and mechanical repairs on boiler and auxiliary equipment. * Communicates well to new and existing customers to determine the nature of boiler-specific problems, provide equipment training, explain services and operations, and provide engineering support. * Completes required field service reports, which document work performed, nature of problem, hours worked, etc. * Problem-solving and ability to address issues and concerns. * Develops and maintains good customer relations and rapport. Look for new sales opportunities and equipment improvements. Promotes our products and services and associates favorably. * Ability to use hand and power tools, combustion analyzers, and multimeters. * May require some overnight travel and overtime. * Must be punctual, flexible, trainable, and a self-starter. Able to think outside of the box and follow detailed directions. Qualifications * High school diploma or general education degree (GED); at least four years related experience and/or training or equivalent combination of education and experience. Electrical and/or Mechanical Engineering studies preferred. * Knowledge of electrical and mechanical systems in industrial steam and power plant operations and familiarity with electrical and mechanical testing equipment. * Ability to communicate effectively with customers, vendors, contractors, sales personnel, and other shop & service employees. * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute ratio and percent. * Proficient in Microsoft Office and Google App programs and use of a tablet and/or smartphone. * While performing the duties of this Job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee is frequently required to reach with hands and arms. The employee is occasionally required to walk, sit, climb, or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision and color vision. * While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, extreme heat, and risk of electrical shock. The employee is occasionally exposed to moving mechanical parts, high, precarious places, and outside weather conditions. The noise level in the work environment is usually loud. #Mesa #LI-Mesa #LI-HVACjobs #LI-Onsite Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Geographic Disclosure Compensation Range: $48.41 - $65.49 per hour The hourly rate is determined by the CBA/rate sheet and test results. Benefits are provided through local labor union aligned with collective bargaining agreement.

Mortenson is currently seeking a Senior Electrical Engineer to join our Solar group that will provide electrical technical support throughout the entire construction project. Travel: This is a 100% travel position, and locations may vary based on the project. Mortenson hires for a career and not a project. When your project is complete you will be assigned to another project. RESPONSIBILITIES * Provide technical lead and support for electrical portions of work projects * Determine best layout of collection systems considering constraints (overhead/underground, roads/cross country, junction box locations) * Review manufacturer's data for electrical scope (wiring requirements, electrical characteristics, grounding, power factor, lightning protection, generator outputs) * Verify construction aligns with electrical engineering design drawings, including preparatory meetings and QA/QC * Lead electrical engineering design and equipment procurement through submittals, transmittals, and RFIs * Provide technical expertise to all parties involved * Ensure subcontractors understand project scope during bidding and provide electrical engineering support throughout the project * Communicate with local utilities for grid interconnection * Perform loss calculations (100% output/annualized) * Develop one-line diagrams of collection systems and substations, and standard electrical construction details * Maintain relationships with site visitors (customers, architects, union representatives, subcontractors) * Run site work and logistics efficiently, offering improvement suggestions * Build relationships with diverse backgrounds and organizational levels * Lead by example, provide effective coaching and feedback, and manage performance QUALIFICATIONS * Bachelor's degree in Electrical Engineering * Minimum three years in electrical construction management or electrical design * Current driver's license * Basic understanding of construction law and business practices * Working knowledge of NEC code and NE safety code a plus * Basic understanding of construction techniques and project management practices * Intermediate skills in Microsoft Office, project, and web applications * Active listening skills and effective communication * Ability to travel up to 100% * Knowledge of Equal Employment Opportunity, inclusive behaviors, and Affirmative Action plans A few benefits offered include: (for Non-Craft & Non-Union Craft working 25+ hours / week) * Medical and prescription drug plans that includes no additional cost vision coverage * Dental plan * 401k retirement plan with a generous Mortenson match * Paid time off, holidays, and other paid leaves * Employer paid Life, AD&D, and disability insurance * No-Cost mental health tool and concierge with extensive work-life resources * Tuition reimbursement * Adoption Assistance * Gym Membership Discount Program The base pay range for this role is $102,000 - $137,700. (Actual range is higher for the following office locations: Denver, CO and Chicago, IL - 5%, Seattle, WA, and Portland, OR - 10%, Washington, D.C. - 12.5%). Base pay is positioned within the range based on several factors including an individual's knowledge, skills, and experience, with consideration given to internal equity. This position is eligible for Mortenson's incentive plan. #LI-GL1 #LI-onsite Please make note: * Visa sponsorship is not offered for this position. * Our postings are typically open a minimum of 5 days and an average of 44 days. ABOUT MORTENSON As a top builder, developer, and EPC (Engineering, Procurement, and Construction), our expertise spans markets like sports, renewable energy, data centers, healthcare, and more. We are builders at heart, working to ensure the built environment has a lasting positive impact. Let's Redefine Possible Equal Employment Opportunity Your uniqueness brings new and creative perspectives to the team. Mortenson is committed to providing equal opportunities of employment (EOE) to all individuals, regardless of your race, religion, gender, national origin, age, veteran status, disability, marital status or any other legally protected category. Other Items to Note * Mortenson reserves the right to hire any individual without legal or financial obligation on unwanted solicitations. No agency emails, calls, or solicitations are accepted without a valid agreement. * Must be currently legally authorized to work in the U.S. without sponsorship for employment visa status (e.g., H1B status, 0-1, TN, CPT, OPT, etc.). We are unable to sponsor or take over sponsorship of an employment Visa at this time.

Abbott is a global healthcare leader that helps people live more fully at all stages of life. Our portfolio of life-changing technologies spans the spectrum of healthcare, with leading businesses and products in diagnostics, medical devices, nutritionals and branded generic medicines. Our 114,000 colleagues serve people in more than 160 countries.JOB DESCRIPTION: MAIN PURPOSE OF ROLE Supports production and process development from concept through sustained manufacturing of FDA regulated products. Responsible for production support, maintenance support, performing process development and qualification, equipment specification, acquisition, installation, and integration. MAIN RESPONSIBILITIES •Interface with internal customers to provide controls support for manufacturing and testing equipment •Support the development and maintenance of automated equipment •Evaluate process and design alternatives based on Design for Manufacturability principles. •Establish knowledge base of new developments in manufacturing and design technologies. •Interface with vendors on procuring materials, services, and equipment •Assemble and evaluate automated equipment •Establishes machine specifications. •Support equipment validations •Support all Company initiatives as identified by management and in support of Quality Management Systems (QMS), Environmental Management Systems (EMS), and other regulatory requirements. •Complies with U.S. Food and Drug Administration (FDA) regulations, other regulatory requirements, Company policies, operating procedures, processes, and task assignments. Maintains positive and cooperative communications and collaboration with all levels of employees, customers, contractors, and vendors. •Evaluates machine logic, electromechanical systems and process controls to troubleshoot equipment and identify process improvement opportunities. May conduct design analysis on components and/or assemblies to assist in the development process by ensuring designs are cost efficient, manufacturable, and reliable. •Communicates with the other engineering personnel to coordinate the interrelated design and assure project completion. •May act as internal consultant providing technical guidance on most complex projects. •This is a non-supervisory position. •Coordinate and participate in equipment Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT), etc. •Conceptualize, design, and build complete solutions for novel or complex problems; explore multiple alternatives. • Programming and integration of controls hardware and software into new and existing manufacturing equipment. •Analyzes current equipment for process suitability and provides detailed plans for improvement •Creates and revises manufacturing documents, specifications, standard operating procedures (SOPs), safety instructions, validation protocols, risk assessments, and procedures and other technical documents to ensure compliant, efficient and safe procedures. •Lead cross functional project teams and coordinate activities •Analyzes, creates and implements manufacturing and/or business process improvements that increase capacity, reduce lead-time, reduce work in process and improve the quality, cost and delivery performance of Abbott. •Investigate and resolve existing equipment operating, reliability, and yield issues and implement corrections or modifications to ensure systems operate within qualified parameters. Create and execute Quality System records to ensure equipment performance history is properly documented. QUALIFICATIONS •Hands on working knowledge of automation control software and PLC programming and troubleshooting. • Strong knowledge and experience in industrial robotics, Servos, Pneumatic systems, sensors, and Machine Vision systems. •Familiarity with qualification and regulatory requirements in the medical device industry, including Design Review, User Requirement Specifications (URS), IQ/OQ/PQ, etc. Associates Degree (± 13 years) with Related with 10-15 years relevant experience. Bachelors Degree Engineering EXPERIENCE Minimum 5 years 5-10 years as automation controls engineer. Must have experience with designing and fabricating automated production equipment for low and high volume processes. Good communication skills and the ability to interact with all levels of the organization. Experience with general automation and control concepts along with machine vision systems, robotics, and PLC software programming. Experience working in a broader enterprise/cross-division business unit model preferred. Ability to work in a highly matrixed and geographically diverse business environment. Ability to work within a team and as an individual contributor in a fast-paced, changing environment. Ability to leverage and/or engage others to accomplish projects. Strong verbal and written communications with ability to effectively communicate at multiple levels in the organization. Multitasks, prioritizes and meets deadlines in timely manner. Strong organizational and follow-up skills, as well as attention to detail. Ability to travel, including internationally. The base pay for this position is $86,700.00 - $173,300.00 In specific locations, the pay range may vary from the range posted. JOB FAMILY:Product DevelopmentDIVISION:CRM Cardiac Rhythm ManagementLOCATION:United States > Sylmar : 15900 Valley View CourtADDITIONAL LOCATIONS:WORK SHIFT:StandardTRAVEL:Yes, 5 % of the TimeMEDICAL SURVEILLANCE:NoSIGNIFICANT WORK ACTIVITIES:Continuous sitting for prolonged periods (more than 2 consecutive hours in an 8 hour day), Keyboard use (greater or equal to 50% of the workday) Abbott is an Equal Opportunity Employer of Minorities/Women/Individuals with Disabilities/Protected Veterans.EEO is the Law link - English: ************************************************************ EEO is the Law link - Espanol: ************************************************************

Are you looking to join an innovative engineering consulting firm with a strong electric utility team that supports clients in over 35 different industries? Entrust Solutions Group has embraced growing markets such as renewables, power engineering services, EV infrastructure, data analytics, and geospatial with cutting edge engineering, consulting, and automation services. **What You'll Do:** + Be a team lead responsible for managing the day to day of a design team. + Responsible for project execution from start to finish. This includes scoping, project timelines, budget estimations, and the delivery of a quality design package. + You will be responsible for design review. + You will often meet with the client and construction crews to review the scope of our design and discuss project execution. + You will be a technical leader on the team contributing to the continual improvement of team knowledge. + Actively seek new project opportunities through building and maintaining client relationships **Required Qualifications:** + Bachelors Degree in civil engineering or traffic/transportation engineering at ABET accredited university + Direct experience in creating Traffic Control Plans using AutoCAD + Traffic Control Planning drafting experience + PE License (preferred) **Not quite right for you? For a full listing of all our openings, please visit us at:** ******************************* **Who We Are:** ENTRUST Solutions Group, an ENR Top 100 company, is a community of people, 3,000+ strong, who are committed to our clients and each other. We provide comprehensive and dependable engineering, consulting, and automation services to gas and electric utilities, telecommunication service providers, pipeline operators, and industrial companies. **In return for top talent, ENTRUST Solutions Group offers:** + Generous paid time off and benefits + 401(k) retirement program with a company match + Career development programs + Tuition reimbursement + Flexible work schedule **To learn more about ENTRUST Benefits and Culture, please visit our company LinkedIn page and follow us at:** ****************************************************** **Benefits & Salary:** + This position pays between $100,000 and $115,000 annually, based on years of experience, and is an exempt position. + Benefits offered include company sponsored medical, dental, vision, and 401(k) plan with company match. Also offered are tuition reimbursement, voluntary life, disability, critical illness, accident and hospitalization plans. HSA or FSA medical accounts and FSA dependent care and transportation/parking accounts are also available. These benefits are subject to employee contribution amounts generally set annually. + Full time employees are eligible to earn PTO hours. + May be eligible for discretionary bonus as determined by the company. **_ENTRUST Solutions Group is proud to be an Equal Employment Opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law._** **_All offers are contingent upon receipt of satisfactory results of a pre-employment drug test and criminal background screening._** **_Headhunters and recruitment agencies may not submit resumes/CVs through this website or directly to managers. ENTRUST Solutions Group does not accept unsolicited headhunter or agency resumes and will not pay fees to any third-party agency or company that does not have a signed agreement with ENTRUST Solutions Group._** **_\#LI-LL1_** Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Are you looking to join an innovative engineering consulting firm with a strong electric utility team that supports clients in over 35 different industries? Entrust Solutions Group has embraced growing markets such as renewables, power engineering services, EV infrastructure, data analytics, and geospatial with cutting edge engineering, consulting, and automation services. What You'll Do: * Be a team lead responsible for managing the day to day of a design team. * Responsible for project execution from start to finish. This includes scoping, project timelines, budget estimations, and the delivery of a quality design package. * You will be responsible for design review. * You will often meet with the client and construction crews to review the scope of our design and discuss project execution. * You will be a technical leader on the team contributing to the continual improvement of team knowledge. * Actively seek new project opportunities through building and maintaining client relationships Required Qualifications: * Bachelors Degree in civil engineering or traffic/transportation engineering at ABET accredited university * Direct experience in creating Traffic Control Plans using AutoCAD * Traffic Control Planning drafting experience * PE License (preferred) Not quite right for you? For a full listing of all our openings, please visit us at: ******************************* Who We Are: ENTRUST Solutions Group, an ENR Top 100 company, is a community of people, 3,000+ strong, who are committed to our clients and each other. We provide comprehensive and dependable engineering, consulting, and automation services to gas and electric utilities, telecommunication service providers, pipeline operators, and industrial companies. In return for top talent, ENTRUST Solutions Group offers: * Generous paid time off and benefits * 401(k) retirement program with a company match * Career development programs * Tuition reimbursement * Flexible work schedule To learn more about ENTRUST Benefits and Culture, please visit our company LinkedIn page and follow us at: ****************************************************** Benefits & Salary: * This position pays between $100,000 and $115,000 annually, based on years of experience, and is an exempt position. * Benefits offered include company sponsored medical, dental, vision, and 401(k) plan with company match. Also offered are tuition reimbursement, voluntary life, disability, critical illness, accident and hospitalization plans. HSA or FSA medical accounts and FSA dependent care and transportation/parking accounts are also available. These benefits are subject to employee contribution amounts generally set annually. * Full time employees are eligible to earn PTO hours. * May be eligible for discretionary bonus as determined by the company. ENTRUST Solutions Group is proud to be an Equal Employment Opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. All offers are contingent upon receipt of satisfactory results of a pre-employment drug test and criminal background screening. Headhunters and recruitment agencies may not submit resumes/CVs through this website or directly to managers. ENTRUST Solutions Group does not accept unsolicited headhunter or agency resumes and will not pay fees to any third-party agency or company that does not have a signed agreement with ENTRUST Solutions Group. #LI-LL1

CDM Smith is seeking a dynamic Electrical Engineer to join our team of forward-thinking experts. You'll design high-performance systems that drive infrastructure resilience, energy innovation, and technical excellence across industries. From power grids to smart facilities, your work will electrify progress. Design and develop electrical systems from foundational to highly complex-including electric master system plans, power systems, protection and generation models, facility power infrastructure, and renewable energy solutions. Perform advanced studies and calculations for power distribution, lighting simulations and layouts, communications, fire alarm, and security systems. Develop white papers and technical documentation to support CDM Smith's Technical Knowledge Management (TKM) program. Conduct field reviews to ensure alignment between design specifications and site conditions; update designs as needed. Collaborate with sales staff to shape winning proposals and respond to client RFPs. Review proposals for compliance with industry standards and regulatory requirements. Engage directly with current and prospective clients to understand and plan for future design needs. Represent the firm at industry conferences and events, enhancing both your visibility and ours. Mentor junior engineers and contribute to their technical growth and project success. Provide guidance and may oversee the work of junior team members to ensure quality and consistency. **Job Title:** Electrical Engineer (Substation) **Group:** IND **Employment Type:** Regular **Minimum Qualifications:** Bachelor's degree in Electrical or Electronic Engineering, or Electrical Technology or related discipline. Professional engineering (PE) license. 7 years of related experience. Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. Equivalent additional directly related experience will be considered in lieu of a degree. **Preferred Qualifications:** Experience leading substation engineering projects through 345kV. Proficiency in protective relay schemes and creating relay schematics/wiring diagrams. Expertise in specifying and selecting electrical equipment, including SCADA/RTU hardware. Familiarity with NESC and NEC standards. Knowledge of substation grounding grid design and lightning protection systems. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 10% **Assignment Category:** Fulltime-Regular **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** Working knowledge of CADD software, including 3D and 4D design tools. Expert understanding of engineering design principles and standards. Proficiency in Microsoft Office applications, especially Excel and Word. Excellent written and verbal communication skills. Strong knowledge of federal, state, and local regulations relevant to electrical design. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $90,605 **Pay Range Maximum:** $158,579 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Hybrid Work Options may be considered for successful candidate. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.