Controls engineer jobs in Kennesaw, GA

Our client is a trusted IT infrastructure and managed services provider serving enterprise customers worldwide. Based out of Dallas, they are looking to hire an IT Project Coordinator/Customer Engineer on a Contract basis. Contract Duration: 6 Month Contract (Potential for extension or conversion) 70-80% travel (both in state and out of state) is required for on-site installations at client locations. There will be mileage reimbursement for the travel. Required Skills & Experience Coordinator for IT Projects at assigned location(s) Single Point of Contact (SPOC) in all matters of Technology at assigned location(s) Collaborate and Coordinate with Clients, Vendors, and Project Management Teams as needed. Ensure that all Site standards are met via Standard Operating Procedures (SOP) and methodology Perform quality work on all deliverables including deployment and network activities Ensure customer satisfaction Ability to install and deploy all field technologies. (POS, Desktop, Label Printers, Office Printers, Kiosks, Tablets, Cabling, and smart hands for Network Equipment). IMAC Services. Perform installation, move, add, and Change for all Supported Equipment at assigned location(s) Performs general preventative maintenance tasks on computers, laptops and any other authorized peripheral equipment Daily Responsibilities Face-to-face customer service experience Proven IT Support and Field Service experience (7+ YoE) Project Management knowledge, Experience in : Incident Management, Problem Management, Change Management, Knowledge Management Proficient in network topology, familiar with rack and stack (Datacenter, IDF / MDF closets), minor config with assistance (assign IPs and verify network connectivity) Proficient with workplace deployment activities; desktop, monitor, docking station, PC/ Laptop / Thin client and peripherals, VoIP Ability to work efficiently as an individual and lead small or large team as required You will receive the following benefits: Medical Insurance - Four medical plans to choose from for you and your family Dental & Orthodontia Benefits Vision Benefits Health Savings Account (HSA) Health and Dependent Care Flexible Spending Accounts Voluntary Life Insurance, Long-Term & Short-Term Disability Insurance Hospital Indemnity Insurance 401(k) including match with pre and post-tax options Paid Sick Time Leave Legal and Identity Protection Plans Pre-tax Commuter Benefit 529 College Saver Plan Motion Recruitment Partners (MRP) is an Equal Opportunity Employer. All applicants must be currently authorized to work on a full-time basis in the country for which they are applying, and no sponsorship is currently available. Employment is subject to the successful completion of a pre-employment screening. Accommodation will be provided in all parts of the hiring process as required under MRP's Employment Accommodation policy. Applicants need to make their needs known in advance.

Tier4 Group is hiring a full-time Technical Services Engineer to own backup, restore, and resiliency outcomes across our MSP client base. This role leads Veeam Backup & Replication delivery, designs 3-2-1 architectures, builds immutable off-site copies, executes recovery testing, and drives incident response. You'll work closely with engineering on L2/L3 server and platform issues, including patch cycles and maintenance coordination. Key Responsibilities Manage backup/restore health, DR readiness, and client communication Design, configure, and tune Veeam (SOBR, replication, Instant Recovery, SureBackup) Build immutable off-site tiers and maintain compliance reporting Execute recovery drills and maintain DR runbooks Automate deployments and reporting (PowerShell/API) Support server patching/maintenance windows and protect backup integrity Enforce security standards (RBAC, MFA, encryption) and maintain audit evidence What You Bring 2+ years in an MSP role focused on backup/DR and Windows Server Deep Veeam experience (VMCE a plus) Knowledge of virtualization (Hyper-V; VMware helpful), storage, networking basics PowerShell automation skills and strong documentation/communication Why Apply Make a direct impact on systems supporting healthcare delivery, collaborate with experienced engineers, and help build scalable DR practices in a growing MSP. Our client offers competitive pay, full benefits (medical, dental, vision, life, disability, 401(k) match), and robust PTO.

On behalf of my client, a leading federal contractor supporting VA Medical Centers nationwide, I am recruiting an experienced Electrical Engineer to support construction, renovation, and infrastructure upgrade projects across the Department of Veterans Affairs. This role provides technical oversight across design, procurement, construction, and post-construction phases, with a strong emphasis on electrical systems, code compliance, and contract administration. Key Responsibilities Support pre-design and design-phase electrical evaluations Review and provide recommendations on drawings, specifications, RFIs, submittals, and change orders Perform technical assessments and validate contractor work quality Ensure compliance with NEC, NFPA, IBC, VA design standards, and federal requirements Support procurement, construction-phase oversight, and closeout activities Conduct occasional onsite field visits for inspections and verification Provide electrical expertise for power distribution, lighting, emergency power, HVAC controls, telecom, and low-voltage systems Maintain construction documentation, project tracking, and reporting Qualifications U.S. Citizenship (required) Ability to pass a federal background check and obtain a VA PIV badge Bachelor's degree in Electrical Engineering (required) Professional Engineer (PE) license (required) Minimum 6 years of combined electrical design and construction experience Experience with healthcare, VA facilities, or federal environments preferred Strong knowledge of building codes, life safety systems, and construction best practices Skilled in reviewing scopes of work, cost evaluations, and contractor compliance Proficient in construction management software and general office applications

As a strong and stable company since 1960, Holder provides nationwide construction management services on complex projects in the aviation, office, technology, education, hospitality, and interiors markets. Our mission is to provide clients with quality construction services, across the country, supported by our offices in Atlanta, Charlotte, Columbus, Dallas, Denver, Phoenix, San Jose and Washington, DC. At Holder, our most valuable resources are our people, who carry forth our core values, brand, and reputation for performance. We are seeking a highly motivated Electrical Design Engineer to join our team in the Atlanta that will support Mission Critical construction operations throughout the country. The ideal candidate for this job is a team player who thrives in a challenging and fast-paced yet supported environment. Your job is to do whatever it takes to help the team succeed. Required Experiences And Skills Has experience with the design process and management of complex Mission Critical projects, including processes, teams, and deliverables Understands risks and roles associated with varying project delivery methods Understands principals of contract documents and agreements Takes initiative to identify, track and actively address design and engineering challenges during the design and construction phases of a project. Ability to read construction drawings and specifications with primary experience with electrical and controls. Understanding and able to reference and apply National Electrical Code (NEC) standards and requirements. Ability to proactively articulate design document expectations and assess actual document status by phase (SD, DD, CD) Ability to conduct cross-discipline drawing coordination and design completion/quality reviews specifically for the MEP disciplines. Can contribute constructability, technical expertise and engineering solutions to a project's design evolution Ability to lead and manage the creation of Integrated Electrical Room concepts based on client or projected selected equipment. Ability to manage subcontractors in the completion of integrated design concepts to finalized products ready for manufacturing. Outstanding communication and time management skills Ability to work in a highly-collaborative environment Ability to work with minimal supervision; self-starter Manage deadlines, maintain files, and provide reporting to department leadership and/or jobsite leadership Requirements For This Position Include Candidate will preferably have 3-5+ Years in an Engineering position. Excellent verbal and written communication skills - ability to effectively communicate across projects and departments with associates of varying skill level. Also, be able to effectively communicate with third party organizations and consulting entities. Earn the trust of associates but maintain ability to independently assess and evaluate issues. Ability to have difficult conversations, free of emotion. Have a high level of morality and ethics. Proactively adjust priorities based on department, project and company needs and communicate adjustments. Be strategic and solutions/goal oriented and detail-oriented, but flexible to changes in plan. Independent worker with a collaborative mindset. Ability to effectively collect information and ask questions, analyze, evaluate, and make recommendations and then organize the appropriate teams for group decision making. Good listener and detail oriented. Escalate issues timely. Ability to innovate and comfortable being introduced to new technology. Maintains a continuous improvement mindset. Proficient in Microsoft based software including Word, Excel, Outlook, and PowerPoint. Highly organized, detail oriented. Coach and mentor others with meaningful feedback. Open to receiving meaningful feedback. Be open to additional responsibilities as role and department services evolve.

Job Description Fall, 2026 Co-op NEEDED Students must be a part of the school's Co-op/Intern Program with a 2.7 GPA and can work 40 hours a week for 14 weeks in the Spring. This is not a remote position. Please submit an Unofficial Transcript along with a Resume when applying. Relay & Control Design Perform routine system protection functions: Develop Preliminary Design Single Line (PDSL) drawings for substation facilities; Provide Electric Membership Cooperatives (EMCs) with fault Data Sheets at the distribution service point; Make field changes for As-Built drawings; Assist staff engineers with the management of technical databases spreadsheets, and files. Work under the guidance of staff engineers, receive specific instructions, and use limited judgment in carrying out work assignments. Basic Electrical theory, Proficient with Word, Excel, PowerPoint, Access. Experience in AutoCAD drafting desired. Strong interest in Power Systems. Desired Major(s): Electrical Engineers Job Posted by ApplicantPro

Were looking for a hands-on Senior Controller to lead and strengthen accounting operations for our fast-growing, multi-location brand. This isnt a corporate finance or CFO-track role. Its ideal for a strong Controller or Assistant Controller who loves improving systems, mentoring a small team, and keeping a fast-moving organization financially tight and audit-ready. Youll bring a balance of structure and scrappiness, ensuring accuracy and control while helping the business scale. Requirements: What Youll Love Here You like to roll up your sleeves and stay close to the work. Youre energized by solving problems, not just managing people. You value collaboration, clarity, and accountability. You thrive in a growth environment where structure is still being built. What Youll Own Lead all day-to-day accounting functions across multiple legal entities. Manage and develop a small, talented accounting team. Oversee month-end close, reconciliations, and accurate financial reporting. Own AP, AR, and employee reimbursement processes; ensure policy and compliance. Prepare for and support annual audits, tax filings, and regulatory reporting. Strengthen internal controls and ensure consistent, GAAP-compliant practices. Improve systems and workflows to drive clarity, consistency, and scalability. Partner cross-functionally with HR, Operations, and Brand teams on shared priorities. Who You Are Bachelors degree in Accounting required; CPA strongly preferred. 610 years of progressive accounting experience, ideally including time as an Assistant Controller or Controller. Experience in multi-entity or franchise environments preferred. Advanced knowledge of GAAP, reconciliations, and audit preparation. Confident, detail-oriented leader with a strong coaching mindset and systems thinking. Proficient in QuickBooks, NetSuite, or comparable accounting platforms. A clear communicator who builds trust and drives accountability across teams. PI0ace8a9cb0f9-31181-38985770

SWA's Engineering team, you will be developing real-time automation solutions from the manufacturing plant floor to the enterprise level, using a variety of programming, configuration, and design tools: PLC and PAC Programming, Operator Interface and HMI application design, SCADA design, Network design, Database design, Vision system design, Machine Safety system design, Motion control (Servo, NC, CNC), Information Solution design, MES design, ERP connector development, High-level software solution design (involving C#, HTML5, .NET, SQL, VB, VBA, and more). Key-skills and interests: machine and process control, high-level programming, information solutions, database development, operational efficiency, mechatronics Responsibilities: Program applications to meet & exceed customer/projects specifications, application requirements. Engineering and implementing real-time automation controls and information solutions Conceptualizing during the design phase of the project life cycle System programming, debugging, and testing Creating documentation, including project engineering notes, project design traceability documentation, case studies, and more Commissioning new solutions; finding opportunities for improvements Creating methodologies and complex problem-solving Learning new technologies Mentoring colleagues on your expertise and knowledge base Having fun and being challenged Technologies Used: PLC Programming Platforms: Beckhoff, B&R Automation, PLCNext, Codesys, Schneider System Networking: Ethernet, Routing and Switching, ADS, Modbus, MQTT, OPC UA, TCP/IP HMI Platforms: Beckhoff, Inductive Automation Vision Platforms: Cognex, Keyence, ROS, Halcon High-level Programming: IEC-61131-3, C#, HTML5, Python, C++ Database Platforms: MS SQL, MongoDB, PostgreSQL, MariaDB, MySQL, InfluxDB Operating Systems: Microsoft Windows 10+, Linux, free BSD Requirements/Qualifications: Bachelor of Science or higher in Mechanical, Electrical, Computer Engineering or related Engineering Technology field or equivalent combination of education and experience, 1-3 years Academic or working experience with some or all the listed “Technologies Used”, in previous section. Demonstrated interest and ability to program, specifically text-based languages and object-oriented concepts. Works well in a team-oriented setting. Thrives on learning and applying what you have learned to new projects. Good problem-solving skills, while learning how to solve more complex problems over time. Capable of self-starting on tasks and asks questions along the way. Possess complete grasp of scientific method of problem solving Ability to follow patterns & build upon established models Understand complex system designs Meticulous, conscientious, analytical, focused, self-starter individual, who is a quick learner.

BlueScope Coated Products is one of the largest coil coating companies in the United States, with facilities across the country. With more than four decades of expertise providing painted metal coils and toll processing services for industries in the construction and consumer product markets, we pride ourselves on delivering premium quality, reliable service, and ongoing innovation to our customers. The Systems Technician shall perform maintenance-related support ensuring the production line produces a repeatable, high-quality product meeting internal and customer quality standard. This is accomplished through programming ladder logic systems to automate repetitive tasks, eliminating safety risks, and responsive troubleshooting when targets are missed. Rewrite or modify PLC ladder logic programs to achieve the plant's Key Performance Indicators. Be the liaison and “change agent” between operators, leaders, and management's wants and needs with a safety mindset. Evaluate machinery's PLC systems to ensure end-of-life items are prioritized for replacement before extensive downtime or impact on safety, throughput, or quality. These duties require managing capital projects and ROI calculations from statistical data. Act as project leader on new equipment procurement, installation, and commissioning. Developing and reviewing Standard Operating Procedures (SOPs). Developing and organizing training material to transfer appropriate process/production and safety knowledge to associates. Train operations and maintenance users in new systems operations and maintenance activities. Perform Safeguard techniques and document changes made to programs to prevent inadvertent loading of obsolete programs or complete loss from corrupted memory or files. Ensure all systems have secure protection protocols consistent with BlueScope standards. Month-end reporting. Compile data for key maintenance performance indicators. Make recommendations for improvements based on data. Assist with all safety issues related to production and ensure that safety goals are achieved. They are engaging associates in all aspects of safety, meetings, conversations, and incident reporting. Create, evaluate, and revise preventive maintenance procedures that drive a reduction in unscheduled downtime, and increase reliability/predictability and consistent quality performance. Minimum: Allen and Bradley RS Logix 5000 certification plus 1 year of Directly Programming (no assisting others) or 4 years solo programming and commissioning on multiple platforms. Must be able to perform mathematical equations to program PLC such as slope, strip weight tension, coil diameter increase, and RPM to Feet per minute and scaling. Maintain the ability to wear a respirator Maintain the ability to drive a forklift Preferred 2 years of mechanical background and experience to aide during PID tuning. Language Skills: The ability to read and comprehend documents including: safety rules, operating and maintenance instructions, procedure manuals and simple correspondence. Also, the ability to communicate information in small group situation's to other employees. Mathematical Skills: Ability to calculate figure's and amounts such as fractions, percentages, area, circumference and volume. Reasoning Ability: Ability to apply common sense understanding, to perform work instruction's that are furnished in written, oral and/or diagram form also, the ability to solve problems' that involve multiple variables' in a standard situation. Physical Demands: While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to walk. The employee is occasionally required to stand; sit; bend; stoop; use hands to handle or feel objects, tools, or controls; reach with hands and arms; climb or balance. The employee will be required to be capable of lifting a minimum weight of 75 pounds. Specific vision abilities include close-up and distance vision, color vision, peripheral vision, and depth perception. Additional Information The preceding job responsibilities and tasks were designed to indicate the general nature and level of work performed by associates in this job. It is not designed to contain or be interpreted as a comprehensive inventory of all job duties and responsibilities required of associates assigned to this job. Associates may be required to perform other duties as assigned. Additional job competencies, individual goals, and performance measurements are set at the department level. The benefits are just as rewarding as the work at BlueScope. To support our goal, we offer a total compensation plan and an outstanding benefits package that includes health insurance, life insurance, short and long term disability, paid time off, and retirement. EEO: Employer/M/F/Disabled/Protected Veteran BlueScope is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status, as a protected veteran, among other things, or status as a qualified individual with disability.

The Senior Automation & Controls Engineer leads and executes Automation and Controls Engineering design activities for minor to major scale Engineering, Procurement, and Construction (EPC) projects in food, consumer products, pharmaceutical, life science, aerospace and industrial facilities. Responsible for executing automation and controls deliverables for project(s) in the front end, detailed design, construction, and start-up phases. Projects range from controls projects working directly for the client to controls self-execution on full scale Automation and Controls EPC projects. Responsible for compliance with company and project site safety policies. Design responsibility for all Automation and Controls scope on the project. Leads a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design. Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines. Responsible for leading and developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization. Responsible for commissioning and startup of those design deliverables. Lead and prepare controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details. Lead the specification, design, and procurement activities for control panel and equipment vendors, manage vendor progression, and lead the Factory Acceptance Tests (FATs). Lead and prepare electrical design deliverables including 480VAC and below equipment and motor power design, installation plan drawings, and conductor schedules. Determine process instrument measurements protocols, such as temperature, pressure, flow, level, analyzers, and control valves. Utilize knowledge of various technologies for selecting the appropriate controls application. Experienced in reviewing P&IDs and working with process engineers to define and show proper controls scope of the project. Develop and manage verification of design, calculations, project studies and report preparation. Interfaces directly with offsite design office and coordinates and tracks execution of controls deliverables to that office. Responsible for leading and performing quality reviews of project design submittals and coordinating those reviews within the department. Responsible for applying knowledge of commonly used automation and controls engineering/design concepts, principles, practices, codes, and procedures within the engineering services industry. Interfaces directly with construction personnel in development of contracts and execution of work. Develops project estimates at each project phase through various software such as Proposal works, Integrated Architecture Builder (IAB), SIL Solver, Bluebeam, Excel, and Visio. Supports project manager in the development and tracking of automation and controls project budgets and expected progress. Works with clients and vendors directly in developing design. Builds effective relationships with existing clients, customers and contractors and develop new business opportunities. Responsible for ensuring customer satisfaction goals and expectations are met. Has a list of clients that frequently request them for projects or assistance. Provides leadership, technical direction and development to Automation and Controls team members. Assists in the day to day allocation of resources to their projects. Coordinate with field personnel to resolve design related installation issues, calculations, field inspections and testing of controls systems. Responsible for leading the technical execution and team during onsite start-up and commissioning activities. Responsible for developing and submitting discipline change notices as needed to the project management team. Fully understands and can execute the EPC project approach. This position will require making trips to job sites to survey, support installations, and lead startups (travel about 30%). Work with our business development team to identify and develop key project and customer pursuits. Frequently attends and hosts client events. Develops business strategies for future projects. Understands business needs and profitability factors. Reviews and develops engineering hour estimates and proposals for all phases of the project. Supports interviewing and hiring process for new team members. Coordinates workload with Automation and Controls Department Manager. Complies with all company policies and standards. All other duties as assigned. Qualifications Bachelor Degree in Controls, Electrical, Mechanical or Chemical Engineering or related degree from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam and 7 years electrical engineering experience. EPC project and Automation 7 Controls experience preferred. Master Degree in Electrical Engineering and 6 years electrical engineering experience. EPC project experience preferred. Expert knowledge in standard engineering techniques and procedures. Strong knowledge of electrical equipment design ANSI and IEEE Standards. Strong computer skills (e.g. Microsoft Office Suite). Excellent written and verbal communication skills. Experience with leading the discipline design for large projects and delegating work tasks to team members. Ability to lead execution of work and resolve issues in a team environment. Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment. Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills. Ability to perform quality reviews for detailed engineering documents and specifications. Ability to travel. accredited program. Must have or be able to obtain a Transportation Worker Identification Card (TWIC). Professional Engineer (PE) License Preferred Preferred: This position requires an individual capable of applying intensive and diversified knowledge of principles and practices to broad areas of assignment. Must be capable of devising new approaches to problems encountered. Ability to perform quality reviews for detailed engineering documents and specifications. Knowledge of applicable design standards covering Automation & Controls Design/Engineering such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A. Experienced with variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS). Experience in Rockwell and Siemens PLC platform. Experience in GE, Modicon, Opto22, Mitsubishi, and Triconex PLC platforms a plus. SCADA experience with Factory Talk and Wonderware local and distributed systems, Ignition Software is a plus. MES Design and Implementation Experience a Plus, PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS. Machine safety risk assessment and required PL design compliance to ISO13849 is a plus. Process safety SIF/SIS design compliance to ISA/IEC 61511 is a plus. Experience with PlantPAX and PackML is preferred. Familiarity with tools like SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired. EEO/Disabled/Veterans Primary Location : Atlanta, GA Travel : Yes, 25 % of the Time Kodi Miller (Miss) Talent Scout AKP Recruiting kodi@akprecruiting.com www.akprecruiting.com Josh May President AKP Recruiting (406) 633-1654 josh@akprecruiting.com www.akprecruiting.com

The Senior Automation & Controls Engineer leads and executes automation and controls engineering design activities for small to large-scale Engineering, Procurement, and Construction (EPC) projects across industries such as food, consumer products, pharmaceuticals, life sciences, aerospace, and industrial facilities. This role is responsible for delivering automation and controls solutions throughout the project lifecycle, including front-end design, detailed engineering, construction, and startup phases. Projects may involve client-directed controls work or full self-executed automation and controls EPC projects. Key Responsibilities: Ensure compliance with all company and project site safety policies. Lead design for all automation and controls scope on assigned projects. Manage and mentor a team of automation and controls engineers, specialists, and designers, coordinating with multi-disciplinary project teams including project management, electrical, estimating, procurement, construction, and other engineering disciplines. Develop software design deliverables such as PLC and HMI programming, Batch systems, MES, servers, and virtualization, and oversee commissioning and startup activities. Prepare and review controls design deliverables including instrument/device lists, I/O lists, control narratives, control panel and hardware designs, device location plans, and installation details. Specify, design, and procure control panels and equipment, manage vendor progress, and lead Factory Acceptance Tests (FATs). Prepare electrical design deliverables including 480VAC and below equipment, motor power design, installation plans, and conductor schedules. Determine process instrumentation requirements for temperature, pressure, flow, level, analyzers, and control valves, selecting appropriate technologies for control applications. Review P&IDs with process engineers to define and validate project controls scope. Develop and verify design calculations, studies, and reports. Coordinate with offsite design teams, ensuring timely execution of controls deliverables. Conduct quality reviews of project design submittals and coordinate feedback within the department. Apply engineering principles, codes, and best practices to automation and controls design and execution. Interface with construction personnel to resolve design-related installation issues, perform field inspections, and support testing of controls systems. Assist project management with project budgets, estimates, and progress tracking using software tools such as ProposalWorks, Integrated Architecture Builder (IAB), SIL Solver, Bluebeam, Excel, and Visio. Develop client and vendor relationships, ensuring satisfaction and supporting business development opportunities. Lead the technical execution of onsite startup and commissioning activities. Develop and submit discipline change notices as needed. Support the hiring and resource allocation for the automation and controls team. Execute EPC project approaches and attend project sites as required (approx. 30% travel). Participate in business development initiatives, client events, and long-term project planning. Perform all other duties as assigned. Qualifications: Bachelors degree in Electrical, Controls, Mechanical, Chemical Engineering, or related field from an ABET-accredited program, with completion of the Fundamentals of Engineering (FE) exam and 7 years of electrical engineering experience; EPC project and automation & controls experience preferred. Masters degree in Electrical Engineering with 6 years of experience preferred. Expert knowledge of standard engineering techniques, electrical equipment design, ANSI/IEEE standards, and industry best practices. Strong computer skills, including Microsoft Office Suite. Proven experience leading discipline design for large projects and delegating work effectively. Strong analytical, critical thinking, problem-solving, organization, and communication skills. Ability to perform quality reviews of detailed engineering documents and specifications. Must be able to travel as required and obtain a Transportation Worker Identification Card (TWIC). Professional Engineer (PE) license preferred. Preferred Skills & Experience: Extensive knowledge of automation & controls engineering/design standards such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, and UL508A. Hands-on experience with various control and safety systems (PLC, SCADA, SIS, BMS, DCS). Rockwell and Siemens PLC platforms preferred; experience with GE, Modicon, Opto22, Mitsubishi, and Triconex a plus. SCADA experience with FactoryTalk, Wonderware, or Ignition Software is a plus. MES design and implementation experience (e.g., PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS) is advantageous. Knowledge of machine safety risk assessment, PL design compliance to ISO13849, and process safety SIF/SIS design to ISA/IEC 61511 is preferred. Familiarity with PlantPAX, PackML, and simulation/design tools such as SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired.

JobID: 8636 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities, and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America. Job Summary Assists the Project Engineer with being the technical source of information for the project. Responds to questions about drawings, specifications, shop drawings, and change orders and have responsibility for assisting in writing change orders, RFl's, meeting minutes, and reviewing Submittals. Maintains an effective and professional working relationship with owners, architects, engineers, subcontractors, and suppliers. This position includes three 'steps' (I, II and Senior), which provide for a progression of skill and experience. Step I is the entry level for individuals with a minimum of experience in this position. Step II is used for employees with 2 years of experience in this position, or with experience on larger and more complex projects. The 'Senior' step is used for employees with more than 4 years of experience and/or experience on significantly larger or more complex projects. Key Responsibilities 1. Assists Project Engineer in developing and maintaining as-built drawings and other work tasks and assists with or reviews and processes submittals, change orders, RFl's, and budget forecasting. Ensures the timely and appropriate generation, collection, distribution, storage, retrieval and ultimate disposition of meeting agendas, RFl's and daily reports. 2. Demonstrates an understanding of the project management plan (PMP) and is involved in support and execution of the plan. Demonstrates a thorough understanding of the change management process and performs project scope activities and supports the project team to ensure the work needed to complete the project successfully. 3. Ensures the administration of the project quality management plan and demonstrates and reinforces a culture of safety throughout the project. 4. May assist in the calculation of daily production rates and unit costs for self-performed work. Participates in risk management including identification, analysis, response planning and monitoring and control on a project and demonstrates competency in understanding the environmental control processes for the project and takes corrective actions when necessary. 5. May be responsible for overseeing/managing the BIM (Building Information Modeling) Coordination between Subcontractors and Designers. 6. May be responsible for the documentation and submittal for the LEED (Leadership in Energy and Environmental Design) Certification of a building and for creating and updating Digital Record Drawings (ORD). 7. May provide lines, grades and layout as required for the project while maintaining an organized log book. 8. May provide the following weekly quantities: maintains accurate quantity logs and reports quantities in compliance with the cost control manual. Completed logs are to be filed with the project files. Perform elements of the processes involved in budgeting and controlling costs so that the project can be completed within the approved budget. Demonstrates business acumen within area of responsibility. (Not all Field Engineers track quantities) 9. Provides support to superintendents required for the execution of the work and assists in the resolution of field problems as necessary. Minimum Job Requirements 1. Ability to assume responsibility, interface and communicate with others is essential. 2. Entry-level position that normally requires a four-year construction-related degree or equivalent technical/field experience. 3. Microsoft Office Suite (Outlook, Word, Excel, PowerPoint, etc.) proficiency. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

WHO WE ARE At KNAPP (pronounced K-NAP, not Nap!), we “Make Complexity Simple” by offering intelligent solutions for digitizing and automating everything from production and distribution to the last mile and stores. We are the customer's value tech chain partner, which means partnering with the customer to create the most value within each link in their supply chain. Leveraging the latest software, AI and Robotics technology, we continue to disrupt the logistics automation industry for the world's industry leaders in grocery, healthcare, retail, e-commerce, apparel & manufacturing. We are a global company with our US headquarters located just North of Atlanta in Kennesaw, GA. KNAPP specializes in automated solutions for both WMS (Warehouse Management Systems) and WCS (Warehouse Control Systems) for B2B (Business to Business) and B2C (Business to Consumer) customers. We are a growing company of over 7,200 employees worldwide and in over 50 countries that is privately held, with 7% of our revenue reinvested in R&D, ensuring a strong and vibrant future! Join us and see how you can help change the world! For more information, visit *************** WHAT YOU GET TO DO The position must ensure that service requests are processed in compliance with the service agreements in customer services contracts and with service operation processes according to company directives. The position is set up in a way that makes it possible for the employee to process service requests and documentation of these in a 24/7 shift operation and on-call operation, as well as to complete the below stated tasks in a timely and appropriate fashion. Essential Functions and Responsibilities : To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Taking over support requests from the service desk and processing them in a solution-oriented manner. Restoration of the service by eliminating the cause of the fault or by means of a workaround. Creation of a problem ticket for troubleshooting via Problem Management if it is not possible to rectify the root cause of the fault. Ensuring that support requests and incident reports are processed within the agreed resolution time, considering the targeted or guaranteed service agreement. Escalation via group management if defined SLAs cannot be met. Ongoing monitoring of the processing status of open support requests and initiation of countermeasures if resolution times are too long. Evaluating incident reports, analyzing trends, taking measures including forwarding relevant information to group management. Providing frequent technical updates per mail or in a bridge call to KNAPP customers during an ongoing escalation. Actively monitoring customer sites and proactively resolving potential Incidents. Support our customer on all technical and operational matters and questions. Work with KNAPP subsidiaries and subject matter experts to ensure an efficient communication and problem resolution. Coordinate and ensure a proper documentation of root cause analysis and incident resolution. Proactively requesting customer information as part of the service agreement. Training of new employees. Checking and supplementing customer documentation and internal documentation. Execution of small projects from Customer Service. Perform all other duties as assigned. WHAT YOU HAVE Bachelor's degree in related field or equivalent combination of education, training, and experience. 3-5 years direct experience preferred Excellent IT knowledge (software, hardware, networks, OS, protocols) Good knowledge of electrics and mechanics Basic knowledge of PLC control systems Basic knowledge of control systems Basic knowledge of warehouse logistics processes and automation systems Excellent communication skills both written and verbal Ability to record complex technical issues both orally and in writing Ability to work well under pressure Working Conditions and Environment : Authorization to work in the U.S. Passport or ability to obtain passport Professional office etiquette is always required Travel expected up to 20% Overtime as required by work Ability to travel by air both domestically (US) and internationally Physical requirements: sitting for long periods of time, standing, walking, climbing a ladder, speaking, visual acuity, finger dexterity, listening, reaching at arm's length, and lifting up to 30 pounds. WHAT YOU WILL GET 2 remote days per week Half day Fridays A beautiful new, state-of-the-art, office complex in Kennesaw, GA Industry competitive compensation Great benefits with better than average employer contributions, including health, dental, vision, life insurance, Flexible Spending Accounts, Short & Long Term Disability and more! 401k with a very generous employer match and no vesting! Paid Vacation & Holidays Profit Sharing Paid Parental Leave Subsidized Daycare Tuition Reimbursement Pet Insurance Subsidized food delivery Monthly celebrations Quarterly employee events Corporate Social Responsibility including recycling, sustainability and volunteering KNAPP is an equal opportunity employer. We are committed to a work environment that supports, inspires, and respects all individuals without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, age, national origin, veteran, disability status or any other basis protected by law. Due to the safety-sensitive nature of this position, strict adherence to KNAPP's drug-free workplace policy is required. All candidates will be subject to drug-screening in accordance with the policy and will be expected to remain drug-free during their employment. There will be no exception if recreational or medical use of marijuana is permitted in the location of employment and/or residence or if use of marijuana is only during “off-hours.”

As a design build engineering firm and general contractor that designs and builds food and beverage processing facilities, Dennis Group's automation & controls engineers work closely with our process, packaging and building engineers to meet our clients' expectations in startup, commissioning, and qualifying their food and beverage production facilities. The role requires regular onsite presence to ensure necessary diagnoses, troubleshooting, and operational startup of our client's production lines, equipment, and facilities. Our automation & controls engineers are frequently facing engineering challenges in applying standard engineering techniques to design, develop, and maintain instrumentation or control systems. Both software and hardware design and troubleshooting skills and abilities is required for this role. Typical responsibilities include, but not limited to: Responsibilities * Handles moderately complex issues and problems and refers more complex issues to higher-level engineer * With general supervision, designs and troubleshoot both software and hardware necessary for control systems utilizing PLCs for integration of manufacturing systems. * Automates manufacturing processes through the use of instrumentation or controls systems. * Design, diagnose, and troubleshoot network infrastructures - Ethernet, DeviceNet, AS-i, Profibus etc. * Develops new PLC applications, interfaces, or embedded controls * Develops new or modifies existing set-up and commissioning of new facilities or upgrading of existing facilities * Design, specify, wire, and procure control panel equipment, e.g. safety circuits, I/O, networks, etc. * Design, specify, and procure electrical equipment, e.g. MCCs, panelboards, transformers, etc. * Specify, procure, configure, and troubleshoot controls hardware and field instrumentation * Assist with coordinating with other engineer disciplines * Troubleshoots and resolves malfunctions and makes recommendations that will improve efficiency or quality of operations * Develop bid documentation for Electrical, Automation, and Low Voltage (network, security) vendors * Documents specifications and operating procedures * Project primary client technical contact * Interface and manage installation contractors during construction * Researching Automation & Controls materials and best practices * Supporting talent growth within our organization * Provide coaching and/or mentoring to a subordinate group when directed by supervisor. Required Education Skills and Experience * Degree in Electrical Engineering or a related field * 4-7 years of experience with Allen Bradley/Rockwell, Siemens, GE Fanuc, Honeywell Systems. * 4-7 years of experience in Visual Basic, SQL, MS ACCESS Database programming skills a plus * 4-7 years of experience with Design and implement process network infrastructure (Ethernet, Device Net, Control Net, ProfiBus, etc.) * 4-7 years of experience in an industrial manufacturing setting * Database programming skills a plus * Proficiency with MS Office and AutoCAD Required * This role is client facing, those successful in this role are professional, self-motivated, and energetic individuals with excellent communication and inter-personal skills. * Must meet travel requirement - you will spend significant time in our client's facilities during installation and startup/commissioning/qualification phases of a project - 35% to 50% of any given time of the year. Physical Requirements * Prolonged periods sitting at a desk and working on a computer. * Prolonged periods of standing and walking during installation, commissioning and startup. * Must be able to lift-up to 30 pounds at times. Travel Requirement * Up to 50% travel required to visit project site and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we've focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn't one thing we do, it's all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics. JOB CODE: 1002576

Soaring above the ordinary, the IMPACT Fly Team is a powerhouse of innovation, precision, and technical mastery. As Major Project Automation & Controls Technicians, you're the architects of efficiency-engineering smarter systems, optimizing workflows, and tackling high-stakes challenges with finesse. Whether troubleshooting on-site or designing groundbreaking solutions, this elite squad is always ready to fly in, fix, and revolutionize. Ready to take your expertise to the next level? Because IMPACT is more than a name-it's a mission. 🚀 What we offer Competitive salary Paid vacation/holidays/sick time - 10+ days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Extensive product and on the job/cross training opportunities With outstanding resources Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us Out: A Day in a Life at Johnson Controls: What you will do As a senior level team member of the iMPACT Fly Team, you will be responsible for traveling 75-100% of the time to and assisting JCI Customers at all levels of building automation system programming, checkout and commissioning. This will include validating hardware and software commissioning activities for building automation systems. You will need to apply your advanced HVAC & Building Automation experience to work on assigned projects. You will work directly on multiple project teams to assist the Project Managers and Field Technicians. How you will do it Loads system-level controller software Performs advanced commissioning and system diagnostics from system-level controllers to end devices (such as: sensors, actuators, etc.) and completes all required commissioning documentation Keeps management and JCI contractor or customer informed of job progress and issues Calibrates systems requiring basic electronic test equipment Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation Documents changes and provides information for as-built documentation Communicates with the JCI contractor or customer upon arrival and before leaving the work site Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety. What we look for Advanced computer skills (Metasys preferred) Advanced knowledge of electrical testing and commissioning tools Strong documentation acumen Good communication and listening skills Advanced knowledge of mechanical HVAC systems Low voltage/120-volt wiring skills preferred A valid driver's license, with no major or frequent traffic violations HIRING HOURLY RANGE: $31- $42 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at *************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

A Controls Systems Engineer at Hanley Energy plays a crucial role in enhancing the efficiency and reliability of mission-critical infrastructure by designing and implementing advanced automation and control systems for multinational clients. This position involves programming PLC/HMI systems, developing SCADA systems, designing and modifying electrical, network, and software system drawings, testing automation systems, and preparing essential project documentation. The role requires expertise in PLC and SCADA applications, familiarity with industrial communication networks, and the ability to interpret electrical schematics. Controls Systems Engineer Responsibilities: Designing/programming PLC/HMI systems Designing/developing SCADA systems Automation and Controls design on a range of projects Developing/Modifying Electrical, Network and Software System drawings Testing automation systems and control panels Preparing project documentation such as URS, FDS and O & M Manuals Providing technical support and troubleshooting for automation systems Collaborating with cross-functional teams to ensure project integration Conducting risk assessments and safety audits on automation systems Training and mentoring junior engineers and technicians Staying updated with industry trends and new technologies Managing project timelines and budgets to ensure timely delivery Qualifications Requirements for the position: Demonstrate knowledge and experience in PLC & SCADA application development Ideally experienced in RSLogix 500/5000, FTView SE, Ignition SCADA Knowledge of industrial communication networks and protocols Ability to interpret electrical schematic drawings Relevant 3rd level engineering qualification Excellent interpersonal communication skills with fluent English

Fall, 2026 Co-op NEEDED Students must be a part of the school's Co-op/Intern Program with a 2.7 GPA and can work 40 hours a week for 14 weeks in the Spring. This is not a remote position. Please submit an Unofficial Transcript along with a Resume when applying. Relay & Control Design Perform routine system protection functions: Develop Preliminary Design Single Line (PDSL) drawings for substation facilities; Provide Electric Membership Cooperatives (EMCs) with fault Data Sheets at the distribution service point; Make field changes for As-Built drawings; Assist staff engineers with the management of technical databases spreadsheets, and files. Work under the guidance of staff engineers, receive specific instructions, and use limited judgment in carrying out work assignments. Basic Electrical theory, Proficient with Word, Excel, PowerPoint, Access. Experience in AutoCAD drafting desired. Strong interest in Power Systems. Desired Major(s): Electrical Engineers

SWAs Engineering team, you will be developing real-time automation solutions from the manufacturing plant floor to the enterprise level, using a variety of programming, configuration, and design tools: PLC and PAC Programming, Operator Interface and HMI application design, SCADA design, Network design, Database design, Vision system design, Machine Safety system design, Motion control (Servo, NC, CNC), Information Solution design, MES design, ERP connector development, High-level software solution design (involving C#, HTML5, .NET, SQL, VB, VBA, and more). Key-skills and interests: machine and process control, high-level programming, information solutions, database development, operational efficiency, mechatronics Responsibilities: Program applications to meet & exceed customer/projects specifications, application requirements. Engineering and implementing real-time automation controls and information solutions Conceptualizing during the design phase of the project life cycle System programming, debugging, and testing Creating documentation, including project engineering notes, project design traceability documentation, case studies, and more Commissioning new solutions; finding opportunities for improvements Creating methodologies and complex problem-solving Learning new technologies Mentoring colleagues on your expertise and knowledge base Having fun and being challenged Technologies Used: PLC Programming Platforms: Beckhoff, B&R Automation, PLCNext, Codesys, Schneider System Networking: Ethernet, Routing and Switching, ADS, Modbus, MQTT, OPC UA, TCP/IP HMI Platforms: Beckhoff, Inductive Automation Vision Platforms: Cognex, Keyence, ROS, Halcon High-level Programming: IEC-61131-3, C#, HTML5, Python, C++ Database Platforms: MS SQL, MongoDB, PostgreSQL, MariaDB, MySQL, InfluxDB Operating Systems: Microsoft Windows 10+, Linux, free BSD Requirements/Qualifications: Bachelor of Science or higher in Mechanical, Electrical, Computer Engineering or related Engineering Technology field or equivalent combination of education and experience, 1-3 years Academic or working experience with some or all the listed Technologies Used, in previous section. Demonstrated interest and ability to program, specifically text-based languages and object-oriented concepts. Works well in a team-oriented setting. Thrives on learning and applying what you have learned to new projects. Good problem-solving skills, while learning how to solve more complex problems over time. Capable of self-starting on tasks and asks questions along the way. Possess complete grasp of scientific method of problem solving Ability to follow patterns & build upon established models Understand complex system designs Meticulous, conscientious, analytical, focused, self-starter individual, who is a quick learner.

As a design/build engineering firm and general contractor that designs and builds food and beverage processing facilities, Dennis Group's Automation & Controls Engineers work closely with our process, packaging and building engineers to meet our clients' expectations in startup, commissioning, and qualifying their food and beverage production facilities. The role requires regular onsite presence to ensure necessary diagnoses, troubleshooting, and operational startup of our client's production lines, equipment, and facilities. Our Automation & Controls Engineers are frequently facing engineering challenges in applying standard engineering techniques to design, develop, and maintain instrumentation or control systems. Both software and hardware design and troubleshooting skills and abilities are required for this role. Typical responsibilities include, but not limited to: Responsibilities Handle basic issues and problems and refer more complex issues to higher-level engineer Design and troubleshoot both software and hardware necessary for control systems utilizing PLCs for integration of manufacturing systems. Automate manufacturing processes through the use of instrumentation or controls systems. Design, diagnose, and troubleshoot network infrastructures - Ethernet, DeviceNet, AS-i, Profibus etc. Develop new PLC applications, interfaces, or embedded controls Develop new or modify existing set-up and commissioning of new facilities or upgrading of existing facilities Design, specify, wire, and procure control panel equipment, e.g. safety circuits, I/O, networks, etc. Design, specify, and procure electrical equipment, e.g. MCCs, panelboards, transformers, etc. Specify, procure, configure, and troubleshoot controls hardware and field instrumentation Troubleshoot and resolve malfunctions and make recommendations that will improve efficiency or quality of operations Develop bid documentation for Electrical, Automation, and Low Voltage (network, security) vendors Document specifications and operating procedures Interface and manage installation contractors during construction Research Automation & Controls materials and best practices Support talent growth within our organization Required Education Skills and Experience Bachelor's degree in Electrical Engineering or a related field 0-3 years of work experience or schooling and familiarity with Allen Bradley/Rockwell, Siemens, GE Fanuc, Honeywell Systems. 0-3 years of work experience or schooling in Visual Basic, SQL, MS ACCESS Database programming skills a plus 0-3 years of work experience or schooling with design and implementation process network infrastructures (Ethernet, Device Net, Control Net, ProfiBus, etc.) 0-3 years of work experience and/or internship(s) in an industrial manufacturing setting Database programming skills a plus Proficiency with MS Office and AutoCAD Required This role is client facing, those successful in this role are professional, self-motivated, and energetic individuals with excellent communication and inter-personal skills. Must meet travel requirement - you will spend significant time in our client's facilities during installation and startup/commissioning/qualification phases of a project - 35% to 50% of any given time of the year. Physical Requirements Prolonged periods sitting at a desk and working on a computer. Prolonged periods of standing and walking during installation, commissioning and startup. Must be able to lift-up to 30 pounds at times. Travel Requirement Up to 50% travel required to visit project sites and other offices. About Us We plan, design, engineer, and build food plants for major brands across the country and the world. For the past three decades, we've focused exclusively on the food and beverage industry, helping your favorite brands put your favorite foods in the grocery store. Simply put, food isn't one thing we do, it's all we do. Dennis Group offers competitive compensation packages commensurate with experience. We provide comprehensive employee benefits including medical, dental, vision, life and disability insurance, paid time off including an open vacation policy, as well as bonus, profit-sharing, and retirement plans. Dennis Group is proud to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or genetics. JOB CODE: 1002521

Unleash your potential with the Johnson Controls team! As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet. Join our winning team and pave the way for a bright future. With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional well-being. Join the Johnson Controls family and thrive in a culture that values your voice and ideas. Your next incredible opportunity is just a few clicks away! Here's What We Have To Offer What we offer Competitive pay Paid vacation/holidays/sick time 10 days of vacation first year! Comprehensive benefits package including 401K, medical, dental, and vision care Available day one! Extensive product and on-the-job/cross-training opportunities With outstanding internal resources! Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Company vehicle, tools, and equipment provided to complete all jobs. JCI Employee discount programs (The Loop by Perk Spot) Check us Out: A Day in the Life of the Building of the Future What you will do Self-Starter but under general direction, responsible for the design, configuration, and operation of complete building control systems to meet the intent of the project requirements. Accountable to field teams for the quality, timeliness, and efficiency of designs. Develops complex software programs, databases, graphics, commissioning, and troubleshooting to ensure proper operations of the building control system. Provides detailed information and submittals to communicate design and operation to customers, consultants, Johnson Controls field installation team, and subcontractors. How you will do it Designs and configures technically complex building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, bill of materials, network layouts, and electrical schematics as required. Develop and test software programs, databases, and graphics necessary to operate the system per the intent of the project requirements. Coordinates and creates the necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned projects. Coordinate factory-mounting processes to meet factory and project schedules. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. Provides field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and any issues. Assists in performing site-specific training for the owner/operator on the total building control system. Participates in release meeting with the project field team. Performs value engineering to provide cost-effective results while maintaining customer satisfaction. May provide work direction and provide mentorship to Systems technicians while onsite performing commissioning activities. Work with management to develop milestones, track progress, complete time sheets in JCI EPIC software, and participate in team meetings. Proactively adheres to company safety standards. High degree of regard for employee and subcontractor safety. Coordinates with external resources to perform engineering duties as needed to maintain project schedules set forth by management. What we look for Bachelor's Degree in Engineering and/or minimum 3 years' experience (see below) Experience Considerations: Demonstrated knowledge of the construction or HVAC industry. Demonstrated knowledge of control theory, automatic temperature controls, building automation systems, and other building subsystems. Demonstrated experience in the integration of low voltage building sub-systems using various industry protocols (i.e,. LON, BacNet, etc). Ability to relate technical knowledge to a non-technical audience. Demonstrated advanced computer skills required, particularly computer-related drafting tools. Position will require lite travel and some overnight stay in Albany, GA HIRING HOURLY RANGE: $27-$36 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** #techhiring Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.