Controls engineer jobs in Knoxville, TN - 125 jobs

The Sr Automation Controls Engineer is responsible for developing, implementing, supporting and improving a broad variety of automated control systems. These systems range in scope from simple single loop controllers and relay logic to advanced HMI - PLC based systems. The Sr Automation Controls Engineer (ACE) will know and understand how to connect automation with the processes of coffee roasting, packaging and distribution **Responsibilities:** + Design, develop, enhance and implement automated solutions that improve employee safety, product quality, manufacturing efficiencies, and reduce costs **.** + Support the commissioning and optimization of both new and existing manufacturing equipment. + Troubleshoot and repair existing manufacturing equipment. + Design, implement and support automated system networks. + Manage change control and system documentation. + Ensure business continuity through industry standards and good engineering practices. + Develop controls and automation skills and capabilities within the maintenance and engineering team. The goal is to enable the technicians to perform appropriate controls and electrical diagnostics and troubleshooting prior to calling the controls engineer + Develop/support and implement data acquisition and reporting systems to support testing and evaluation work in accordance company and site goals + Initiate, plan, execute, monitor and control automation centric projects + Manage and coordinate activity on capital and continuous improvement projects. + Interface with and support manufacturing department heads and supervisors as needed to support automated systems and processes. + Interface with and support other Keurig Dr Pepper Engineering Disciplines. + Interface with and direct vendors and contractors. + Preparation and administration of training for maintenance and operations personnel. + Follows all policies, procedures, ergonomic standards and safety requirements as defined by Keurig Dr Pepper. + Able to set priorities based on production needs. + Performs other duties as assigned **Total Rewards:** + Salary range: $76,400 - $133,800 + Actual placement within the compensation range may vary depending on experience, skills, and other factors + Benefits, subject to election and eligibility: Medical, Dental, Vision, Disability, Paid Time Off (including paid parental leave, vacation, and sick time), 401k with company match, Tuition Reimbursement, and Mileage Reimbursement + Annual bonus based on performance and eligibility + Benefits eligible Day 1! **Requirements:** + BS in Engineering or equivalent experience + 5+ years of Industrial Automation experience in a manufacturing environment. + Extensive PLC programming experience is required. Prefer Allen-Bradley systems experience including, but not limited to, the Rockwell FactoryTalk suite of software, Logix platform, and proficient understanding of Allen-Bradley industrial networks. + Working knowledge industrial communication protocol. + Experience with Manufacturing Execution Systems. **Competencies** + Hands on electrical experience with control panels and electrical circuits + Good working knowledge of robotic control systems, preferably with FANUC. + Good working knowledge of variable speed and servo drives, preferably Allen-Bradley + Knowledge of visual basic and databases a plus. + Possess a good understanding of computer and industrial networks + Ability to work hours outside of routine schedule as necessary. + Lean Manufacturing experiences a plus. + Ability to get along with others, be punctual, and follow instructions. + Ability to effectively perform in a fast-paced, dynamic work environment. + Ability to follow Keurig Dr Pepper policies and procedures. **Company Overview:** Keurig Dr Pepper (NASDAQ: KDP) is a leading beverage company in North America, with a portfolio of more than 125 owned, licensed and partner brands and powerful distribution capabilities to provide a beverage for every need, anytime, anywhere. We operate with a differentiated business model and world-class brand portfolio, powered by a talented and engaged team that is anchored in our values. We work with big, exciting beverage brands and the #1 single-serve coffee brewing system in North America at KDP, and we have fun doing it! Together, we have built a leading beverage company in North America offering hot and cold beverages together at scale. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation, and growth. Will you join us? We strive to be an employer of choice, providing a culture and opportunities that empower our team of ~29,000 employees to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A.I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to **************** in lieu of clicking Apply. Please include the job title and location or Job ID # in the email subject line. Keurig Dr Pepper is an equal opportunity employer and affirmatively seeks diversity in its workforce. Keurig Dr Pepper recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law.

Roadrunner Venture Studios is partnering with a cutting-edge startup revolutionizing working to build bigger, simpler. Perseus Materials builds the world's fastest manufacturing system for large-scale composite parts without molds, tooling, or delays. By reinventing how composites are made, Perseus unlocks a new era of structural materials: faster to produce, easier to assemble, and strong enough for real-world scale. By integrating chemistry, robotics, and custom hardware, Perseus unlocks entirely new paradigms in FRP manufacturing, to redefine how big things get built. Check out recent coverage on Core Memory: This Machine Could Be A US Manufacturing Breakthrough: ******************************************* Your Mission: In this role, you will help design and control the systems that make that possible - the machinery that moves, shapes, heats, and consolidates advanced materials with high precision. You'll own the “nervous system” of our platform, with a wide-open canvas to work with leadership to imagine what's possible at huge scale when we do manufacturing our own way.You're a hands-on controls engineer who loves big, complex machines and figuring out how to make them behave that likes being: In the lab or on the floor, standing next to a system you helped design Wiring sensors and actuators, tuning control loops, and iterating until it “just runs” Translating fuzzy requirements (“we want to make that big thing, faster and better”) into concrete architectures, I/O, and logic Comfortable in ambiguity, curious by default, and you enjoy taking true ownership over how a system works end-to-end. What You'll Do Aid in design and implement key control architectures for our large-scale manufacturing systems (controllers/PLCs, HMIs, I/O, communications). Develop control logic for motion, force/tension control, heating/curing, and other key operations. Select and integrate controllers, drives, sensors, and related hardware so the system is responsive, stable, and debuggable. Lead integration and calibration of sensors (temperature, pressure, flow, position, speed, etc.) and ensure signals are clean and usable. Build and iterate on test rigs and prototypes; tune and debug control schemes (PID, multi-loop, state machines). Commission new equipment: bring-up, I/O checkout, tuning, and optimization under real operating conditions. Set up data acquisition and simple tools (scripts, plots, dashboards) to visualize system behavior and support troubleshooting. Work closely with chemists, materials scientists, and mechanical engineers to connect machine behavior to material performance and customer needs. What You Bring Familiarity with machine building, electrical, and coding systems including 32, Teensy, Raspberry Pi Pico, Arduino, etc. Experience in electrical engineering and electrical safety CAD design experience, preferable SolidWorks Experience with various sensors for process monitoring; for example: have evaluated multiple mechanisms to measure fluid temperature including thermocouples, thermistors, IR sensors, etc. Self starter who can operate with minimal direction and take initiative Naturally curious and eager to learn new tools, materials, and techniques Experience in a startup or R&D environment Experience with streamlining data acquisition, manipulation, and analytics/visualization Experience with large-scale continuous processes Experience with composite materials A builder's mindset: you like to own systems, close loops, and leave things working better than you found them.

JOB POSTING TITLE: CONTROLS ENGINEER 4 The Electrical Machine Design engineer will be expected to design, program, debug, and support automated systems and automation equipment for production. The engineer will be responsible for offering electrical design input and assisting in concept and development efforts within the facility, either through infrastructure, programming, or design. Extensive PLC, Robot, Human Machine Interface (HMI), and electrical controls skills are necessary. In addition, the successful candidate will offer troubleshooting assistance on all electrical and/or controls equipment focusing on issue resolution and data acquisition. This role requires a collaborative team working style and ability to work within a cross functional environment including management, machine operators, supervisors, and other engineers. The engineer must be self-motivated, work with minimum supervision, possess a skill set that will enable and drive continuous improvement, and work to transition new technologies into the framework of the business. This position will assist in setting standards for new control equipment and learn additional project management skills. Basic Responsibilities: Develop cost estimates for electrical systems - including purchased components, design & install labor Design of electrical hardware circuit and safety control circuit for automated machines and equipment Create electrical hardware drawings and schematics Lead projects including design review meetings with production, maintenance, quality control, and others as needed Program machine software (PLC, robot, vision, HMI, etc.) Debug of programming during machine build and early-stage running Research, develop, test, design, and implement current and new technologies Provide on-going technical support for in house technicians in the machine-building group Support/advise with machine specification development for outsourcing activities Prepare, update, and deliver professional training materials, such as operation manuals, instructions, and technical reports Serve as a technical steward for emerging technologies and team development. The ideal candidate will be able to perform these responsibilities independently. It is also important to be able to summarize and report critical information to their chain-of-command clearly and in a time-efficient manner. Also, this candidate will be responsible for some project leadership - including facilitating meetings to build consensus on the project direction and scope, making materials to communicate to related groups or chain-of-command, developing schedules or action lists, collaborating with others to ensure project results are obtained. Qualifications: 8+ years of experience working as controls engineer or related role Bachelor's degree in electrical engineering, Electrical Technology or Mechatronics, Associate's degree in a related engineering field and combination of relevant experience can be considered. Analytical, problem-solving, and interpersonal skills Formal training or extensive experience on PLC's (ControlLogix, OMRON CJ & NJ), Robot (DENSO RC8), AutoCAD Electrical Strong verbal and written communication skills Proven project completion history with successful results Independently manage a workload consisting of long-term projects and unplanned day-to-day priorities Must be a hands-on person and values time invested on the shop floor working in and on the process Benefits Summary: Health, Dental, Vision, Prescription Drug plans Life and Accidental Death & Dismemberment Insurance Flexible Spending Account Employee Assistance Program 401K with 4% company match Bonus Program Wellness Program Onsite Fitness Center (vary by location) Tuition Reimbursement Career Development and Ongoing Training Paid holidays and vacation Cafeteria and food markets (vary by location) Volunteer opportunities Employee recognition (employee and milestone events) Annual Salary: $107,500-$134,000

JOB POSTING TITLE: CONTROLS ENGINEER 4 The Electrical Machine Design engineer will be expected to design, program, debug, and support automated systems and automation equipment for production. The engineer will be responsible for offering electrical design input and assisting in concept and development efforts within the facility, either through infrastructure, programming, or design. Extensive PLC, Robot, Human Machine Interface (HMI), and electrical controls skills are necessary. In addition, the successful candidate will offer troubleshooting assistance on all electrical and/or controls equipment focusing on issue resolution and data acquisition. This role requires a collaborative team working style and ability to work within a cross functional environment including management, machine operators, supervisors, and other engineers. The engineer must be self-motivated, work with minimum supervision, possess a skill set that will enable and drive continuous improvement, and work to transition new technologies into the framework of the business. This position will assist in setting standards for new control equipment and learn additional project management skills. Basic Responsibilities: * Develop cost estimates for electrical systems - including purchased components, design & install labor * Design of electrical hardware circuit and safety control circuit for automated machines and equipment * Create electrical hardware drawings and schematics * Lead projects including design review meetings with production, maintenance, quality control, and others as needed * Program machine software (PLC, robot, vision, HMI, etc.) * Debug of programming during machine build and early-stage running * Research, develop, test, design, and implement current and new technologies * Provide on-going technical support for in house technicians in the machine-building group * Support/advise with machine specification development for outsourcing activities * Prepare, update, and deliver professional training materials, such as operation manuals, instructions, and technical reports * Serve as a technical steward for emerging technologies and team development. The ideal candidate will be able to perform these responsibilities independently. It is also important to be able to summarize and report critical information to their chain-of-command clearly and in a time-efficient manner. Also, this candidate will be responsible for some project leadership - including facilitating meetings to build consensus on the project direction and scope, making materials to communicate to related groups or chain-of-command, developing schedules or action lists, collaborating with others to ensure project results are obtained. Qualifications: * 8+ years of experience working as controls engineer or related role * Bachelor's degree in electrical engineering, Electrical Technology or Mechatronics, Associate's degree in a related engineering field and combination of relevant experience can be considered. * Analytical, problem-solving, and interpersonal skills * Formal training or extensive experience on PLC's (ControlLogix, OMRON CJ & NJ), Robot (DENSO RC8), AutoCAD Electrical * Strong verbal and written communication skills * Proven project completion history with successful results * Independently manage a workload consisting of long-term projects and unplanned day-to-day priorities * Must be a hands-on person and values time invested on the shop floor working in and on the process Benefits Summary: * Medical, Dental, Vision, Prescription Drug Plans * 401K with 4% Company Match * Vacation/PTO and 13 Paid Holidays * Bonus Program * FSA/HSA and Dependent Care Programs * Company provided Life, Disability, ADD, and Business Travel Insurance * Various No Cost Wellness & Chronic Condition Management Programs * Various Optional Insurance Programs such as Legal, Identity Theft, Critical Illness, etc. * Tuition Reimbursement * Career Development and Ongoing Training * Employee Assistance Program * Employee Spotlight and Recognition Program * Volunteer opportunities * Onsite Fitness Center (vary by location) * Cafeteria and food markets (vary by location) * Onsite Health Clinic and Pharmacy (vary by location) Candidates residing 50+ miles from the work location are eligible for relocation assistance. Annual Salary: $107,500-$134,000

Come make a difference in our community by Making Healthy Happen! TITLE: Electrical Controls Tech I or II SHIFT: Day Shift (7:00am - 7:00pm on a 2-2-3 rotation) COMPENSATION AND BENEFITS: Competitive wages Medical, dental, vision, prescription drug coverage, life insurance, short-term/long-term disability (effective the 1st of the months following 30 days of continued service) 401k w/ company match 7 paid holidays and 3 floating holidays for use at associate's discretion Immediately eligible for vacation and holiday pay! Annual allowance for prescription safety glasses Education and fitness reimbursement Associate referral program $$$! Associate discount programs Overtime available As an Electrical Controls Technician I or II at Iatric Manufacturing Solutions, you will provide critical electrical support to keep our manufacturing systems running efficiently. Electrical Controls Technician I candidates will focus on programming and troubleshooting PLCs, diagnosing electrical issues, and supporting daily operations and project work. Electrical Controls Technician II candidates will take on advanced responsibilities, including leading complex troubleshooting, programming across multiple platforms, and driving improvements to optimize system performance. ESSENTIAL ACCOUNTABILITIES Electrical Controls Technician I Work safely and follow facility guidelines Provide daily electrical/process support to Operations and HPOT teams Troubleshoot electrical systems, circuits, motors, drives, and PLCs Support continuous improvement of converting processes and equipment Assist with equipment documentation and procurement needs Implement repairs, including program modifications when required Maintain flexibility to support downtime or backup shift coverage Demonstrate commitment to Rockline/Iatric's RRITE Values and teamwork Electrical Controls Technician II Includes all Tech I accountabilities, plus: Modify existing logic and programming as projects require Tune, modify, and install new manufacturing equipment Lead advanced troubleshooting and provide technical expertise for electrical controls This position is designated as Safety-Sensitive (A safety-sensitive position is one in which the associate's inability or impaired ability to perform their job-related tasks could result in a direct threat to the associate's safety or the safety of others). QUALIFICATION REQUIREMENTS: (To perform this job successfully, an individual must be able to perform each of the essential accountabilities satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.) Electrical Controls Technician I Associates degree or industrial maintenance certification in Electronics Technology, 2‑year electronics training program, or equivalent 1+ years of experience with automation and controls equipment (AB Control Logix and at least one other platform) Basic understanding of PLC ladder logic, HMI, and Vision system programming Knowledge of robotic programming, 24VDC systems, and ability to make minor control modifications (timers, counters, constants) preferred Electrical Controls Technician II AS in Electronics Technology, 2‑year electronics training program, or equivalent 3+ years of experience with automation and controls equipment (AB Control Logix and at least one other platform) Strong understanding of PLC ladder logic, HMI, and Vision system programming Knowledge of robotic programming, 24VDC systems, and ability to make minor control modifications (timers, counters, constants) preferred Shared Requirements (Tech I & II) Ability to troubleshoot and support multiple controls platforms Strong problem‑solving skills and attention to detail Commitment to safety, teamwork, and reliable attendance PHYSICAL AND MENTAL REQUIREMENTS: (The physical demands described here are representatives of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions) Must be able to communicate face-to-face and over the phone Occasional lifting up to 50 lbs. Frequent standing, bending, twisting, kneeling, climbing, pushing/pulling and reaching, as well as occasional sitting. Work environment includes occasional noise >85db, hot and cold temperatures and some fumes/odors. Ability to work on ladders and at heights required for the installation of equipment. Requires ability to read write, calculate, interact socially, and reason. Requires good visual acuity with depth perception and color vision. WORK ENVIRONMENT: (The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) Production area Maintenance Shop Grade: Electrical Controls Technician I: 07 Electrical Controls Technician II: 09 FLSA Status: Non-Exempt

Job Description We are seeking a hands-on Electrical & Controls Field Engineer to design, program, and commission advanced automation systems used in industrial rubber manufacturing facilities worldwide. This role offers the rare chance to build cutting-edge equipment from the ground up, designing electrical systems, integrating robotics and motion controls, and directly supporting installations at customer sites across the country and globe. You'll be a key part of a small, growing engineering team that's bringing new automation capabilities to U.S. manufacturing. From concept through startup, you'll influence everything from control architecture to field integration, working closely with mechanical designers, production technicians, and international customers to ensure every system runs flawlessly. If you're someone who thrives on solving complex control challenges, enjoys seeing your work come to life on the floor, and wants to make a visible impact in a company with deep roots and a forward-looking mindset, this is an exceptional opportunity. Compensation $105k - $115k Travel Expectations Up to 50% Primarily domestic, some international Relocation Assistance Available upon request Benefits Medical, dental, vision 401(k) with match Requirements Responsibilities Design & Develop Control Systems - Design and develop complete control systems, including PLCs, HMIs, robotics, motion control, and safety systems. Create Electrical Schematics - Produce detailed electrical hardware drawings and schematics using AutoCAD Electrical. Specify Components - Size and specify drives, servos, and other control components (Allen-Bradley, Siemens, Mitsubishi, or Omron). Program & Debug Automation - Write, debug, and optimize PLC, HMI, and motion control programs for reliability and performance. Travel & Commission Equipment - Travel to customer sites (approximately 50%) to install, integrate, and troubleshoot automated systems. Lead Debugging & Startup - Oversee system debugging and startup during in-house assembly and factory acceptance testing. Provide Field Support - Deliver on-site troubleshooting and service for both new and legacy equipment. Collaborate Cross-Functionally - Partner with mechanical engineers and project managers from concept through completion. Lead Design Reviews - Chair design review meetings with internal teams and external customers to ensure alignment. Develop Documentation & Training - Create technical documentation, training materials, and cost estimates for controls-related scope. Innovate & Prototype Solutions - Research, prototype, and implement emerging technologies to enhance equipment performance and reliability. Qualifications Required Bachelor's degree in Electrical Engineering, Electrical Technology, or related field (Associate degree with relevant experience will be considered) Comfortability with 50% travel expectations 5+ years of experience in controls engineering, automation, or related role 3+ years of experience programming PLCs (Allen-Bradley, Siemens, Mitsubishi, or Omron). Proficiency in AutoCAD Electrical and electrical schematic development Preferred Skills Familiarity with process engineering or machine design integration Multi-platform controls experience (Allen-Bradley, Siemens, Mitsubishi, Omron) Project management or team leadership experience The Ideal Candidate Loves Field Work - You see travel and field work as an opportunity to see the world, visit factories across industries, and be hands-on with customers Partnership-Oriented - You thrive on collaboration, whether it's working side-by-side with mechanical and production teams or partnering directly with customers to integrate systems into their operations. Systems Thinker - You understand how everything connects, how electrical, mechanical, and process decisions influence one another, and how each piece of equipment supports the customer's larger manufacturing goals. Impact-Driven - You take pride in seeing tangible results from your work and value being part of a smaller, tight-knit team where collaboration, ownership, and creativity have real impact. Benefits Compensation $105k - $115k Travel Expectations Up to 50% Primarily domestic, some international Relocation Assistance Available upon request Benefits Medical, dental, vision 401(k) with match

Merrick & Company is looking for an Instrumentation and Controls System Engineer for our Oak Ridge, TN project office. This position supports Nuclear Services and Technology (NST) projects related to Department of Energy (DOE) work. Other projects may include industrial power generation. This is a direct position with Merrick & Company. Annual salary range for this position is $83,600.00 - $108,200.00. Base pay offered may vary depending on job-related knowledge, skills, and experience. WHAT YOU'LL DO This engineering position will include the following key responsibilities: * Develop control system design documents and drawings under minimal supervision of senior engineers. * Being primary interface with project management and other engineering disciplines in matters dealing with project control systems. * Assist in developing the basis of design and scope of work documents. * Develop equipment specifications for controls equipment, operations manuals, and test reports. * Develop control system narratives, logic drawings, programming reports and I/O lists. * Ensure that control systems adhere to relevant industry standards and all project safety requirements/regulations. * Ensure technical accuracy and conformance to project design criteria of engineered work products. * Ensure appropriate procedures, design guidelines, and design tools are utilized on projects. * Travel to domestic client project sites to support projects and assist with marketing Merrick's capabilities. REQUIRED QUALIFICATIONS * Degree Requirements: Bachelor of Science in Electrical Engineering, Mechanical Engineering, or a related field from an ABET accredited university * EIT Certification with the ability to pursue a State of Tennessee PE License * Minimum of Four (4) - Eight (8) years progressive experience * Proficient knowledge of HMI and SCADA systems. * Piping & Instrumentation (P&ID) interpretation. * Capable with Instrumentation selection and datasheet preparation. * Familiarity with Rockwell Automation control systems. * Strong understanding of PLC's, DCS, and HMI systems. * Skilled in the use of programming languages such as ladder logic, C, or Python. * Proficiency in SQL database management. * Client projects for this position requires US Citizenship. DESIRED QUALIFICATIONS * Nuclear related design experience preferred but not required (NQA-1, NRTL, etc.) PERKS * Employee Owned - all eligible U.S. employees have an Employee Stock Ownership Account. * Robust Employee Referral Program. * Annual performance and compensation reviews. * Professional Training and Development. * Employee Recognition Awards. * Peer Mentor Program * And Much More! ADDITIONAL INFORMATION * Apply online only. No e-mail, hard copy or third-party resumes accepted. * At Merrick, every resume is carefully reviewed by our team of experienced human recruiters-never by AI. We are committed to a fully human-centered hiring process, ensuring each candidate receives thoughtful, personalized attention at every stage. * Merrick & Company offers a competitive compensation and benefits package which includes health insurance, dental and vision coverage, 401(k), and paid time off (PTO). * Merrick is an Equal Opportunity Employer, including disability/vets. * Employment with Merrick is contingent upon completion of a pre-employment background check, MVR check, and drug screen. * Degree Requirements: Bachelor of Science in Electrical Engineering, Mechanical Engineering, or a related field from an ABET accredited university * EIT Certification with the ability to pursue a State of Tennessee PE License * Minimum of Four (4) - Eight (8) years progressive experience * Proficient knowledge of HMI and SCADA systems. * Piping & Instrumentation (P&ID) interpretation. * Capable with Instrumentation selection and datasheet preparation. * Familiarity with Rockwell Automation control systems. * Strong understanding of PLC's, DCS, and HMI systems. * Skilled in the use of programming languages such as ladder logic, C, or Python. * Proficiency in SQL database management. * Client projects for this position requires US Citizenship. This engineering position will include the following key responsibilities: * Develop control system design documents and drawings under minimal supervision of senior engineers. * Being primary interface with project management and other engineering disciplines in matters dealing with project control systems. * Assist in developing the basis of design and scope of work documents. * Develop equipment specifications for controls equipment, operations manuals, and test reports. * Develop control system narratives, logic drawings, programming reports and I/O lists. * Ensure that control systems adhere to relevant industry standards and all project safety requirements/regulations. * Ensure technical accuracy and conformance to project design criteria of engineered work products. * Ensure appropriate procedures, design guidelines, and design tools are utilized on projects. * Travel to domestic client project sites to support projects and assist with marketing Merrick's capabilities.

Process Control Engineer - Knoxville - 2500035K Description Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials, including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. New Graduate OpportunityWe are hiring a Process Control Engineer in Knoxville, TN! The Process Control Engineer (PCE) under the supervision of an experienced Process Control Engineer, will provide process control design services at all levels of detail, from conceptual design through final installation for all construction materials facilities, with increasing responsibility as experience is gained. Develop Programmable Logic Controller (PLC) and Human-Machine Interface (HMI) programs to control aggregate facilities, assuming increasing responsibility as experience is gained. Assist the Corporate Network Services (CNS) Department in the installation and configuration of plant networks, wireless systems, and firewalls. Serve as the Corporation's representative to interface with and provide technical guidance to system integrators and construction contractors. Provide cost estimates and project schedules for capital and expense projects as needed, with increasing responsibility as experience is gained. Assist in supporting existing facilities and assisting in upgrading existing control systems. Assess needs and internal resources available to perform the required tasks and coordinate the use of outside contractors as necessary. Must gain knowledge of current methods, best practices, and code standards, including NEC, NFPA, IEEE, and NEMA relating to assigned work. Prepare purchase requisitions for process control equipment. Provide input to the creation and modification of Corporate Standards, Specifications, and Policies. What You'll Do:Cost Estimating: Under the supervision of a PCE IV or higher, provide electrical cost estimates for proposed new facilities and plant modifications. These estimates will include costs for PLC and HMI systems, related software, and installation costs. Engineering Design Services: Under the supervision of a PCE IV or higher, provide complete process control design for aggregate, asphalt, and ready-mix facilities. Design shall include ladder logic, HMI, plant networks, and control schematics. Provide technical supervision in formulating calculations, evaluations, feasibility studies, and optimum design criteria for plant electrical integrity, reliability, and endurance. Services provided are conceptual operating plans, detailed layouts, and equipment selections. Project Management: Under the supervision of a PCE IV or higher, provide project management activities on projects working with internal personnel as well as outside contractors, developing schedules and goals to meet milestone requirements. Project Review: Participate in the review of capital and expense projects pertaining to design correctness, feasibility, and cost for the sections of the project related to process control. Standardization and Innovation: Participate in the standardization of projects and databases for both engineering and estimating information. Maintain an awareness of technology trends in the electrical and instrumentation industry and the application thereof by competition and others. Analyze future plant control systems and apply new technology and original innovation to attain competitive superiority where possible. Qualifications Skills You'll Need:Education:Bachelor's Degree in Electrical Engineering, Mechatronics, or related field preferred; or equivalent combination of education, training, and experience. Experience:0 to 3 years of experience in the design and installation of heavy industrial control systems is desired, preferably in aggregates or related industries. Identifying electrical problems, troubleshooting, and field installation experience. Experience with using AutoCAD is desired but not required. Additional Qualifications:Ability to understand basic software (Excel, Word, PowerPoint) and use a computer is required. Knowledge of Allen Bradley, GE, Wonderware, and Historian Software systems is desired but not required. Knowledge of SQL Server and other reporting software is a plus. Knowledge of industrial control systems, and computer, PLC, and HMI, programming. Knowledge of computer networking is desired but not required. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impacts daily lives - and every employee contributes. Our aggregates are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. Job: Engineering Primary Location: Tennessee-Knoxville Organization: GM - CND DIV OH Schedule: Full-time Job Posting: Dec 5, 2025, 4:16:15 PM

SMSI provides expert management consulting, program and project management, and technical consulting services to government and private sector clients. SMSI has grown and evolved by building an outstanding reputation for client-focused performance and for delivering results that enable clients to meet commitments and milestones. SMSI is an Equal Employment Opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Job Summary: SMSI, LLC is seeking an Instrumentation and Controls Engineer (I&C) for work on a large capital line-item project supporting NNSA. The work would be performed from Oak Ridge, TN. The I&C Engineer supports the systems acceptance testing for the Instrumentation and Controls engineering discipline. The I&C Engineer will utilize the systems engineering process providing a foundational knowledge of functional and operational requirements, design criteria, and identification and implementation of applicable codes and standards. The I&C Engineer will support systems testing, systems acceptance, systems verification and operational readiness. Responsibilities: Prepares systems test plans and procedures. Supports systems acceptance testing. Reviews systems allocation and verification packages for requirement traceability. Develops systems verification packages ensuring requirement traceability. Reviews and validates modification design change packages. Performs field walkdowns supporting I&C start-up engineering. Prepares systems for operational readiness reviews and closeout. Reviews and validates vendor data against systems verification and acceptance plans. Assists systems engineers in developing and maintaining technical baseline documents at project closeout. Independently applies extensive and diversified knowledge of principles and practices in broad areas of assignments and related fields. Works on a major project or several projects of moderate scope with complex features. Receives supervision and guidance relating to overall objectives, critical issues, new concepts, and policy matters. Required Skills: B.S. degree in Engineering from ABET accredited program with 5-10 years of related instrumentation and controls design engineering experience. Working design experience in nuclear industry/facility is preferred with NQA-1 experience and IEEE, NEC codes and ISA standards. Experience with PLC and HMI programming preferred but not required. Candidate must be a US Citizen. Candidate must be able to work onsite fulltime during regular business hours Monday-Friday. Active DOE Q clearance preferred but not required. Educational Requirements: A bachelor's degree in engineering or related discipline from an ABET-accredited college or university.

ABOUT THE ROLE We are seeking a Field Engineer, Electrical to join our team supporting the Uranium Processing Facility! This position is full-time. Responsibilities Support completion of UPF's Electrical system(s). Provide project field engineering specialization and expertise with electrical systems. Exercise judgment related to appropriate electrical codes and standards. Review submittals related to electrical engineering. Support electrical inspection activities. Utilize strong field background related to electrical experience. Assist with recommendations to ensure field engineering activities operate safely, are complete, and conform to quality standards and project requirements Perform the following tasks: Work Planning & Packaging - prepares construction drawings and sketches & facilitates planning construction methods and procedures. Material Management - initiates requisition for field purchases & prepares quantity takeoffs of field purchased material and equipment. Quantities - verifies commodities on quantity tracking systems or other computer database systems as required. Safety / Quality Control - ensures zero accident philosophy and requirements are implemented and adhered to by craft and others when in the operational area & tools and equipment are in safe condition and operated safely. System Turnover - develops firm understanding of electrical system and area scoping and drawings required for package development. Subcontract Coordination - reviews and approves inspection test plans & coordinates reviews of subcontractor submittals. Requirements Education & Years of Experience - High School Diploma and 9+ years of relevant experience or Bachelor's Degree 3+ years of relevant experience. Citizenship - To be considered, you must be a United States (U.S.) citizen due to the federal nature of the work. Clearance - To be considered, you must be able to obtain and maintain a government issued clearance, if needed. Must have a strong electrical execution background (as either an Electrical Superintendent or Field Engineer). Must have a working knowledge of design codes and standards including NFPA 70-2014, NEC, and NQA-1. Experience with DOE, DoD, and/or commercial nuclear construction projects is preferred. Must have strong experience in work execution and field expertise. About the Site The Uranium Processing Facility (UPF) is a construction project at the Y-12 National Security Complex in Oak Ridge, Tennessee that is intended to modernize and replace aging facilities for uranium operations. Once complete, UPF will support the nation's nuclear weapons stockpile, naval reactors, and defense nuclear nonproliferation while ensuring the long-term safety, security, and viability of enriched uranium capabilities in the United States. ( energy.gov ) . Bechtel National, Inc. (BNI), Bechtel's government services business, is one of the top providers to departments and agencies of the U.S. and British governments. Its successes include many large, first-of-a-kind projects in government site management, environmental restoration, defense, space, energy, and national and homeland security. This position will provide support to the Uranium Processing Facility (UPF) located at the Y-12 National Security Complex in Oak Ridge, Tennessee. UPF is a multi-year, multi-billion-dollar project and will be a first-of-its-kind complex for enriched uranium operations in support of Y-12 missions. UPF is one of the Department of Energy's largest investments in Tennessee since the Manhattan Project and one of the National Nuclear Security Administration's largest construction projects. When complete, UPF will: replace a 70-year-old facility with modern buildings, reduce operational costs and energy consumption, improve worker safety, and provide enriched uranium capabilities well into the future. The UPF project works on a 4/10 schedule. Start times are flexible but the standard work week is Monday - Thursday from 7:00 am to 5:30 pm. ABOUT GEM GEM Technologies, Inc. (GEM) is an award-winning federal contractor with more than 30 years of experience providing environmental, construction, facility management, and technical services to federal agencies, state and local governments, and commercial organizations. Founded in 1994 as a nuclear engineering firm to support federal operations in East Tennessee, GEM has since expanded into a nationwide, multi-disciplinary provider with over 270 employees and a diverse portfolio of contracts in the environmental, nuclear, and defense sectors. Some reasons to join GEM are: Our philosophy - We believe in the power of effective collaboration and recognize that good partnerships are the building blocks to success. Our relationships - Partnering with federal clients, we solve complex problems, exceed expectations, and advance critical missions. Our team - We are committed to managing a cohesive workforce and cultivating a supportive workplace for our employees on contracts and in-office. Our community involvement - Supporting our communities, we invest time and money in local schools and non-profit organizations. COMPENSATION AND BENEFITS GEM's offered compensation is dependent on candidates' education, qualifications, and relevant years of experience. To recruit and retain our exceptional staff, we offer the opportunity to elect benefit packages that best suit our employee's needs; this includes, but is not limited to, a competitive Salary, Medical, Dental and Vision Insurance (including HSA & PPO options), Paid Time Off (PTO), Paid Holidays, Life Insurance, and a matching 401(k) Retirement Plan. Please Note : With the exception of mandated state requirements, GEM does not publish salary information on external job boards; as such, most ranges listed are estimates made by vendors and not actual salary ranges. EQUAL OPPORTUNITY EMPLOYER GEM Technologies, Inc. is an Equal Opportunity/Affirmative Action Employer and does not discriminate on the basis of race, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information, veteran status, marital status, pregnancy or related condition, or any other basis protected by law.

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials, including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. New Graduate Opportunity We are hiring a Process Control Engineer in Knoxville, TN! The Process Control Engineer (PCE) under the supervision of an experienced Process Control Engineer, will provide process control design services at all levels of detail, from conceptual design through final installation for all construction materials facilities, with increasing responsibility as experience is gained. Develop Programmable Logic Controller (PLC) and Human-Machine Interface (HMI) programs to control aggregate facilities, assuming increasing responsibility as experience is gained. Assist the Corporate Network Services (CNS) Department in the installation and configuration of plant networks, wireless systems, and firewalls. Serve as the Corporation's representative to interface with and provide technical guidance to system integrators and construction contractors. Provide cost estimates and project schedules for capital and expense projects as needed, with increasing responsibility as experience is gained. Assist in supporting existing facilities and assisting in upgrading existing control systems. Assess needs and internal resources available to perform the required tasks and coordinate the use of outside contractors as necessary. Must gain knowledge of current methods, best practices, and code standards, including NEC, NFPA, IEEE, and NEMA relating to assigned work. Prepare purchase requisitions for process control equipment. Provide input to the creation and modification of Corporate Standards, Specifications, and Policies. What You'll Do: Cost Estimating: Under the supervision of a PCE IV or higher, provide electrical cost estimates for proposed new facilities and plant modifications. These estimates will include costs for PLC and HMI systems, related software, and installation costs. Engineering Design Services: Under the supervision of a PCE IV or higher, provide complete process control design for aggregate, asphalt, and ready-mix facilities. Design shall include ladder logic, HMI, plant networks, and control schematics. Provide technical supervision in formulating calculations, evaluations, feasibility studies, and optimum design criteria for plant electrical integrity, reliability, and endurance. Services provided are conceptual operating plans, detailed layouts, and equipment selections. Project Management: Under the supervision of a PCE IV or higher, provide project management activities on projects working with internal personnel as well as outside contractors, developing schedules and goals to meet milestone requirements. Project Review: Participate in the review of capital and expense projects pertaining to design correctness, feasibility, and cost for the sections of the project related to process control. Standardization and Innovation: Participate in the standardization of projects and databases for both engineering and estimating information. Maintain an awareness of technology trends in the electrical and instrumentation industry and the application thereof by competition and others. Analyze future plant control systems and apply new technology and original innovation to attain competitive superiority where possible. Skills You'll Need: Education: * Bachelor's Degree in Electrical Engineering, Mechatronics, or related field preferred; or equivalent combination of education, training, and experience. Experience: * 0 to 3 years of experience in the design and installation of heavy industrial control systems is desired, preferably in aggregates or related industries. * Identifying electrical problems, troubleshooting, and field installation experience. * Experience with using AutoCAD is desired but not required. Additional Qualifications: * Ability to understand basic software (Excel, Word, PowerPoint) and use a computer is required. * Knowledge of Allen Bradley, GE, Wonderware, and Historian Software systems is desired but not required. Knowledge of SQL Server and other reporting software is a plus. * Knowledge of industrial control systems, and computer, PLC, and HMI, programming. * Knowledge of computer networking is desired but not required. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impacts daily lives - and every employee contributes. Our aggregates are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions.

Job Title: Electrical EngineerJob Description We are seeking a contract Electrical Engineer to assist with the cleanup of incomplete and outdated Bills of Materials (BOMs) and engineering documentation. This position involves working closely with the Mechanical Engineer and other team members to support documentation validation, component-level analysis, and board-level troubleshooting. It requires strong electrical design experience and comfort navigating multiple software platforms. Responsibilities + Review electrical BOMs, schematics, board layouts, and legacy documentation for accuracy and completeness. + Identify outdated, obsolete, or inconsistent electrical components and update documentation accordingly. + Collaborate cross-functionally to verify component-level specifications, tolerances, and compliance. + Support obsolescence reviews, board-level troubleshooting, and specification updates. + Process Engineering Change Requests (ECRs) and manage data within SAP. + Use platforms such as Altium, ORCAD, SPICE, and Excel to perform design reviews and updates. Essential Skills + 3-5+ years of electrical engineering experience, preferably in a product development or support role. + Experience in electrical product development to a hardware level. + Electrical Engineering Degree highly preferred. + Experience working within SAP or similar ERP software system. + Experience working with BOMs of electromechanical products. + Proficient in Altium or similar PCB design software, and comfortable with Excel and related tools. Additional Skills & Qualifications + Experience with PCB Design & Simulation Software - Altium, OrCAD, SPICE. + Experience working within regulated industries such as nuclear, medical, or defense. + Familiarity with obsolescence management and legacy product lifecycle support. + Familiarity with design validation processes and document control systems. Work Environment This position is based in an on-site temperature-regulated manufacturing/office environment. The work schedule is Monday through Friday, from 7:30/8:00 AM to 4:30/5:00 PM. Enjoy benefits such as non-billable holidays and paid time off. Job Type & Location This is a Contract position based out of Oak Ridge, TN. Pay and Benefits The pay range for this position is $50.00 - $65.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Oak Ridge,TN. Application Deadline This position is anticipated to close on Jan 5, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

APTIM is seeking an electrical engineer to join our team of engineering professionals serving our Government and Commercial programs. Engineers will apply critical thinking skills to initial planning, procurement support, plan development, design, construction, and commissioning phases of projects. APTIM expects our engineers to be creative problem solvers and actively look for the best way to support our varied Government and commercial clients. Engineers will often work on multiple projects simultaneously and perform other duties as required. This position prefers prior knowledge of the engineering and construction industry and an understanding of basic corporate mechanisms such as scopes of work, construction safety protocols, and experience in a professional work environment. Key Responsibilities/Accountabilities: Produce complete electrical design documentation, including drawings, specifications, and supporting electrical calculations. This includes engineering for systems such as power distribution, lighting, grounding, lightning protection, backup power supply, instrumentation, controls, and fire detection/alarming. May perform in project leadership role and/or may supervise the activities of lower level personnel in the performance of project work. Provides resolution to a diverse scope and range of complex problems where analysis of data requires evaluation of identifiable factors. Demonstrates good judgment in selecting methods and techniques for obtaining solutions Coordinate with and consult other Engineers and Designers to engineer, plan, and detail components and systems and resolve various technical and other issues. Coordinate and work with other Disciplines for complete multi-discipline design packages. Assist with both the initial planning and as well as design phases of projects. Support procurement and construction phases of projects with engineering knowledge and experience. Ensures conformance to applicable engineering codes and standards as well as company policies and procedures. Travel to work site locations to provide engineering support and conduct meetings with clients. May travel to other company offices to support engineering efforts as well. Basic Qualifications: Requires Bachelor's Degree in Electrical Engineering from ABET accredited school. 5 -9 years related experience. Has basic knowledge of theories, practices, and procedures in electrical engineering. Familiarity with NEC, IEEE, NFPA, and ANSI codes and standards. Has a Professional Engineering license or the ability to obtain within a short time frame after hire. Ability to obtain a DOE security clearance - must be a US Citizen. For additional information please see DOE Order 472.2. Strong computer skills with Office products (Word, Excel, etc.). Training and experience with engineering analysis software (ETAP, SKM, Visual, etc.) Training and/or experience with CADD (AutoCAD, REVIT, and/or MicroStation, etc.). Good verbal and writing skills. Factory, field, and/or construction experience a strong plus. Practical electrical skills a plus. Experience with instrumentation and controls systems a plus. Candidates must be willing to travel for infrequent (and typically short) field/site visits. ABOUT APTIM APTIM is committed to accelerating the transition toward a clean and efficient energy economy, building a sustainable future for our communities and natural world, and creating a more inclusive and equitable environment that celebrates the diversity of our communities. We specialize in environmental, resilience, and sustainability and energy solutions, as well as technical and data solutions, program management, and critical infrastructure. For every challenge our clients face, there is an opportunity for APTIM to innovate a fit-for-purpose solution that will raise your organization or community to a new standard of excellence. What you can expect from APTIM: Work that is worthy of your time and talent Respect and flexibility to live a full life at work and at home Dogged determination to deliver for our clients and communities A voice in making our company better Investment into your personal and professional development As of the date of this posting, a good faith estimate of the current pay range for this position is $80,000 - $130,000 Per Year. Compensation depends on several factors including: experience, education, key skills, geographic location of the position, client requirements, external market competitiveness, and internal equity among other employees within APTIM. Employee Benefits APTIM Federal Services, LLC is committed to providing an extensive range of benefits that protect and promote the health and financial well-being of our employees and their families through the APTIM Benefits Marketplace ************************************ Medical, vision, and dental insurance: Through the marketplace, our employees can choose benefits from five metallic levels and 10+ carriers to find the right benefits that work for them in their location. Life insurance Short-term and long-term disability insurance Paid holidays, vacation, and sick leave (eligibility based on company policy and applicable law) 401(k) APTIM offers three 401k plans through the Aon Pooled Employer Plan (PEP). The specific plan you are eligible for depends on the business unit you are in. The details of the largest plan are found here: APTIM 2025 401(k) Plan Features (makeityoursource.com) APTIM - Helpful Documents Watch our video: About APTIM - In Pursuit of Better #LI-BM1 #LI-ONSITE

Requisition Id 15714 We are seeking an Electrical, Instrumentation and Controls Engineer to join the Systems Engineering (SE), Design and Fabrication Group within the Research Reactors Division (RRD) at Oak Ridge National Lab (ORNL). The Systems Engineering (SE), Design and Fabrication Group is responsible for the High Flux Isotope Reactor (HFIR) configuration management program. This group also provides technical support to operations, maintenance and performs systems analysis. As the Electrical, Instrumentation, and Controls Engineer, you will design and modify reactor instrumentation loops and control systems, provide technical support for I&C maintenance activities, lead field work, and analyze reactor system performance. This position will function as a cognizant system engineer for the assigned HFIR plant system in the HFIR System Engineering Program and DOE O 420.1 for the hazard category 1 nuclear facility and shall be qualified as a HFIR System Engineer in the RRD Training Program. Major Duties/Responsibilities: * Support the design, modification, and documentation of reactor structures, systems, and components. * Apply relevant codes and standards, such as DOE Orders, ASME, ICC, IEEE, etc. * Assist with field implementation, testing, and project execution for engineering modifications. * Provide technical support for troubleshooting equipment issues and developing corrective and preventive maintenance activities. * Develop work instructions and provide guidance to craft personnel during maintenance and field work. * Perform operability assessments and support investigations of abnormal events or equipment issues. * Monitor system performance, review maintenance and reliability data, and help identify equipment or system vulnerabilities. * Follow environmental, safety, health, and quality program requirements to promote a safe working environment. * Deliver ORNL's mission by aligning behaviors, priorities, and interactions with our core values of Impact, Integrity, Teamwork, Safety, and Service. Promote equal opportunity by fostering a respectful workplace - in how we treat one another, work together, and measure success. Basic Qualifications: * A BS in electrical engineering or related field and a minimum of 5 years of relevant experience in design/systems engineering. * Experience developing and interpreting requirements and technical specifications. * A strong understanding of reading and interpreting electrical design drawings including single lines and schematics. Preferred Qualifications: * Ten or more years of experience with electrical, instrumentation and control, or digital control systems at a nuclear facility. * Familiarity with the regulatory programs which define the HFIR work environment, including DOE Orders pertaining to conduct of operation and maintenance, OSHA requirements, and IEEE standards. * Familiarity with General Design Criteria for Nuclear Power Plants or General Design Specifications for HFIR. * Ability to diagnose instrument problems and develop formal work package instructions for performance and documentation of repairs. * Experience in the operation, calibration, and troubleshooting of radiation monitors and sensors, experience with flow instrumentation, and familiarity with environmental and process monitoring systems, including temperature, pressure, and level sensors used in nuclear facilities. * Experience in project management, leading maintenance tasks, procedure development, procurement of materials, and equipment analysis is desired. * Familiarity with instrumentation loops associated with reactor safety systems that include power supplied, recorders, trip comparators and isolators. * Working knowledge of the National Electrical Code, NFPA 70E and NFPA 70B. Special Requirements: * Export control, no clearance: This position requires access to technology that is subject to export control requirements. Successful candidates must be qualified for such access without an export control license. * Physical Requirements: Work involves various physical requirements and working conditions. As such, a pre-hire physical will be required after offer. * Visa Sponsorship: Visa sponsorship is not available for this position. Security, Credentialing, and Eligibility Requirements: * This position requires the ability to obtain and maintain an HSPD-12 PIV badge. * For employment at Oak Ridge National Laboratory (ORNL), a Real ID compliant form of identification will be required. * Additionally, ORNL is subject to Department of Energy (DOE) access restrictions. All employees must also be able to obtain and maintain a federal Personal Identity Verification (PIV) card as mandated by Homeland Security Presidential Directive 12 (HSPD-12) and Department of Energy (DOE) Order 473.1A, which requires a favorable post-employment background investigation. * To obtain this credential, new employees must successfully complete and pass a Federal Tier 1 background check investigation. This investigation includes a declaration of illegal drug activities, including use, supply, possession, or manufacture within the last year. This includes marijuana and cannabis derivatives, which are still considered illegal under federal law, regardless of state laws. For foreign national candidates: * If you have not resided in the U.S. for three consecutive years, you are not eligible for the PIV credential and instead will need to obtain a favorable Local Site Specific Only (LSSO) risk determination to maintain employment. * Once you meet the three-year residency requirement, you will be required to obtain a PIV credential to maintain employment. Benefits at ORNL: We offer competitive pay and benefits programs to attract and retain hardworking people! The laboratory offers many employee benefits, including medical and retirement plans and flexible work hours, to help you and your family live happy and healthy. Employee amenities such as on-site fitness, banking, and cafeteria facilities are also provided for convenience. Other benefits include the following: Prescription Drug Plan, Dental Plan, Vision Plan, 401(k) Retirement Plan, Contributory Pension Plan, Life Insurance, Disability Benefits, Generous Vacation and Holidays, Parental Leave, Legal Insurance with Identity Theft Protection, Employee Assistance Plan, Flexible Spending Accounts, Health Savings Accounts, Wellness Programs, Educational Assistance, and Employee Discounts. Relocation Assistance is available for this position. If you have difficulty using the online application system or need an accommodation to apply due to a disability, please email: ***********************. #LI-LK1 This position will remain open for a minimum of 5 days after which it will close when a qualified candidate is identified and/or hired. We accept Word (.doc, .docx), Adobe (unsecured .pdf), Rich Text Format (.rtf), and HTML (.htm, .html) up to 5MB in size. Resumes from third party vendors will not be accepted; these resumes will be deleted and the candidates submitted will not be considered for employment. ORNL is an equal opportunity employer. All qualified applicants, including individuals with disabilities and protected veterans, are encouraged to apply. UT-Battelle is an E-Verify employer. Nearest Major Market: Knoxville

Job Description Senior Electrical Engineer (PE) We're searching for a Professional Engineer with strong experience in electrical system design and project leadership. This role focuses on delivering high-quality electrical solutions across a variety of building and industrial applications, including power distribution, lighting, safety systems, and controls. The ideal candidate brings a broad technical background, strong communication skills, and the ability to guide design teams toward successful project execution. What You'll Work On Develop electrical system layouts for power, lighting, emergency systems, and equipment controls. Provide customized engineering solutions tailored to client needs and project requirements. Lead and support electrical designers and coordinate effectively with broader project teams. Ensure work aligns with NEC guidelines and relevant industry standards. Use AutoCAD and Revit to create accurate drawings and models. Technical Focus Areas Medium- and low-voltage power distribution design Single-line diagrams and distribution schematics Interior and exterior lighting system design Grounding system engineering Fire alarm and life safety system layouts Analysis & Engineering Capabilities Power distribution and system performance analysis Load flow and power factor studies Arc flash compliance and NFPA 70E evaluations Emergency generator and backup power system design UPS system design and specification development

Job Description PDS 5 / Power Delivery Substation is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. Mesa seeks a Substation P&C Designer to be responsible for the design and/or checking of deliverables associated with a high voltage substation. This person will be responsible for the design of deliverables associated with a high voltage substation. This typically includes, but is not limited to: One Line Diagrams, Control House layouts, Relay Panel Front Views, Elementary and/or Schematic Diagrams, Wiring Diagrams, Bills of Materials, and Cable Schedules. Responsibilities Must be able to complete assignments within budget and schedule with a high degree of accuracy Works under the direction of a P&C Group Lead Utilize AutoCAD Electrical (ACADE) based protection and control standards Performs technical preparation of deliverables and other project documents Ensures deliverables comply with IEEE and/or client standards and meet applicable design requirements Required Qualifications Expertise utilizing AutoCAD and/or AutoCAD Electrical (ACADE) Associate's degree in Design or Drafting Proficiency in verbal and written communication Two (2) years of applicable experience minimum Preferred Qualifications Experience developing P&C Design for Power Substations Keen interest in learning and using the latest Autodesk software tools, methods, and technologies to develop Power Substation design This opportunity is for a hybrid (home and office) arrangement located in Knoxville, TN. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job DescriptionRoadrunner Venture Studios is partnering with a cutting-edge startup revolutionizing working to build bigger, simpler. Perseus Materials builds the world's fastest manufacturing system for large-scale composite parts without molds, tooling, or delays. By reinventing how composites are made, Perseus unlocks a new era of structural materials: faster to produce, easier to assemble, and strong enough for real-world scale. By integrating chemistry, robotics, and custom hardware, Perseus unlocks entirely new paradigms in FRP manufacturing, to redefine how big things get built. Check out recent coverage on Core Memory: This Machine Could Be A US Manufacturing Breakthrough: ******************************************* Your Mission: In this role, you will help design and control the systems that make that possible - the machinery that moves, shapes, heats, and consolidates advanced materials with high precision. You'll own the “nervous system” of our platform, with a wide-open canvas to work with leadership to imagine what's possible at huge scale when we do manufacturing our own way.You're a hands-on controls engineer who loves big, complex machines and figuring out how to make them behave that likes being: In the lab or on the floor, standing next to a system you helped design Wiring sensors and actuators, tuning control loops, and iterating until it “just runs” Translating fuzzy requirements (“we want to make that big thing, faster and better”) into concrete architectures, I/O, and logic Comfortable in ambiguity, curious by default, and you enjoy taking true ownership over how a system works end-to-end. What You'll Do Aid in design and implement key control architectures for our large-scale manufacturing systems (controllers/PLCs, HMIs, I/O, communications). Develop control logic for motion, force/tension control, heating/curing, and other key operations. Select and integrate controllers, drives, sensors, and related hardware so the system is responsive, stable, and debuggable. Lead integration and calibration of sensors (temperature, pressure, flow, position, speed, etc.) and ensure signals are clean and usable. Build and iterate on test rigs and prototypes; tune and debug control schemes (PID, multi-loop, state machines). Commission new equipment: bring-up, I/O checkout, tuning, and optimization under real operating conditions. Set up data acquisition and simple tools (scripts, plots, dashboards) to visualize system behavior and support troubleshooting. Work closely with chemists, materials scientists, and mechanical engineers to connect machine behavior to material performance and customer needs. What You Bring Familiarity with machine building, electrical, and coding systems including 32, Teensy, Raspberry Pi Pico, Arduino, etc. Experience in electrical engineering and electrical safety CAD design experience, preferable SolidWorks Experience with various sensors for process monitoring; for example: have evaluated multiple mechanisms to measure fluid temperature including thermocouples, thermistors, IR sensors, etc. Self starter who can operate with minimal direction and take initiative Naturally curious and eager to learn new tools, materials, and techniques Experience in a startup or R&D environment Experience with streamlining data acquisition, manipulation, and analytics/visualization Experience with large-scale continuous processes Experience with composite materials A builder's mindset: you like to own systems, close loops, and leave things working better than you found them.

Come make a difference in our community by Making Healthy Happen! TITLE: Electrical Controls Tech I or II SHIFT: Day Shift (7:00am - 7:00pm on a 2-2-3 rotation) COMPENSATION AND BENEFITS: * Competitive wages * Medical, dental, vision, prescription drug coverage, life insurance, short-term/long-term disability (effective the 1st of the months following 30 days of continued service) * 401k w/ company match * 7 paid holidays and 3 floating holidays for use at associate's discretion * Immediately eligible for vacation and holiday pay! * Annual allowance for prescription safety glasses * Education and fitness reimbursement * Associate referral program $$$! * Associate discount programs * Overtime available As an Electrical Controls Technician I or II at Iatric Manufacturing Solutions, you will provide critical electrical support to keep our manufacturing systems running efficiently. Electrical Controls Technician I candidates will focus on programming and troubleshooting PLCs, diagnosing electrical issues, and supporting daily operations and project work. Electrical Controls Technician II candidates will take on advanced responsibilities, including leading complex troubleshooting, programming across multiple platforms, and driving improvements to optimize system performance. ESSENTIAL ACCOUNTABILITIES Electrical Controls Technician I * Work safely and follow facility guidelines * Provide daily electrical/process support to Operations and HPOT teams * Troubleshoot electrical systems, circuits, motors, drives, and PLCs * Support continuous improvement of converting processes and equipment * Assist with equipment documentation and procurement needs * Implement repairs, including program modifications when required * Maintain flexibility to support downtime or backup shift coverage * Demonstrate commitment to Rockline/Iatric's RRITE Values and teamwork Electrical Controls Technician II Includes all Tech I accountabilities, plus: * Modify existing logic and programming as projects require * Tune, modify, and install new manufacturing equipment * Lead advanced troubleshooting and provide technical expertise for electrical controls This position is designated as Safety-Sensitive (A safety-sensitive position is one in which the associate's inability or impaired ability to perform their job-related tasks could result in a direct threat to the associate's safety or the safety of others). QUALIFICATION REQUIREMENTS: (To perform this job successfully, an individual must be able to perform each of the essential accountabilities satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.) Electrical Controls Technician I * Associates degree or industrial maintenance certification in Electronics Technology, 2‑year electronics training program, or equivalent * 1+ years of experience with automation and controls equipment (AB Control Logix and at least one other platform) * Basic understanding of PLC ladder logic, HMI, and Vision system programming * Knowledge of robotic programming, 24VDC systems, and ability to make minor control modifications (timers, counters, constants) preferred Electrical Controls Technician II * AS in Electronics Technology, 2‑year electronics training program, or equivalent * 3+ years of experience with automation and controls equipment (AB Control Logix and at least one other platform) * Strong understanding of PLC ladder logic, HMI, and Vision system programming * Knowledge of robotic programming, 24VDC systems, and ability to make minor control modifications (timers, counters, constants) preferred Shared Requirements (Tech I & II) * Ability to troubleshoot and support multiple controls platforms * Strong problem‑solving skills and attention to detail * Commitment to safety, teamwork, and reliable attendance PHYSICAL AND MENTAL REQUIREMENTS: (The physical demands described here are representatives of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions) * Must be able to communicate face-to-face and over the phone * Occasional lifting up to 50 lbs. * Frequent standing, bending, twisting, kneeling, climbing, pushing/pulling and reaching, as well as occasional sitting. * Work environment includes occasional noise >85db, hot and cold temperatures and some fumes/odors. * Ability to work on ladders and at heights required for the installation of equipment. * Requires ability to read write, calculate, interact socially, and reason. * Requires good visual acuity with depth perception and color vision. WORK ENVIRONMENT: (The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) * Production area * Maintenance Shop Grade: Electrical Controls Technician I: 07 Electrical Controls Technician II: 09 FLSA Status: Non-Exempt

ABOUT THE ROLE We are seeking a Electrical System Engineer to join our team supporting the Uranium Processing Facility! This position is full-time and will be based out of Oak Ridge, Tennessee. Responsibilities Provide electrical-related field and construction support to the Uranium Processing Facility. Perform electrical inspections. Complete electrical punch lists. Participate in Construction to CSU turnover walkdowns for assign areas of responsibility. Liaise with the Field Engineer as required to support electrical component/system turnover. Perform walkdowns to validate that the system configuration is in accordance with the design. Requirements Education & Years of Experience - Bachelor's Degree and 3+ years of relevant experience or a High School Diploma and 9+ years of relevant experience. Citizenship - To be considered, you must be a United States (U.S.) citizen due to the federal nature of the work. Clearance - To be considered, you must be able to obtain and maintain a government issued clearance, if needed. Must have knowledge of electrical systems and field engineering activities. Must be familiar with electrical codes, standards, and construction drawings. Must understand quality control and safety procedures. Must have experience with material management, quantity takeoffs, and system turnover coordination. Must have coordination and communication skills to work with various teams and stakeholders. Must be physically able to work in various field conditions. Desired Skills Experience with DOE, DOD, and/or commercial nuclear construction projects is preferred. About the Site The Uranium Processing Facility (UPF) is a construction project at the Y-12 National Security Complex in Oak Ridge, Tennessee that is intended to modernize and replace aging facilities for uranium operations. Once complete, UPF will support the nation's nuclear weapons stockpile, naval reactors, and defense nuclear nonproliferation while ensuring the long-term safety, security, and viability of enriched uranium capabilities in the United States. ( energy.gov ) . ABOUT GEM GEM Technologies, Inc. (GEM) is an award-winning federal contractor with more than 30 years of experience providing environmental, construction, facility management, and technical services to federal agencies, state and local governments, and commercial organizations. Founded in 1994 as a nuclear engineering firm to support federal operations in East Tennessee, GEM has since expanded into a nationwide, multi-disciplinary provider with over 270 employees and a diverse portfolio of contracts in the environmental, nuclear, and defense sectors. Some reasons to join GEM are: Our philosophy - We believe in the power of effective collaboration and recognize that good partnerships are the building blocks to success. Our relationships - Partnering with federal clients, we solve complex problems, exceed expectations, and advance critical missions. Our team - We are committed to managing a cohesive workforce and cultivating a supportive workplace for our employees on contracts and in-office. Our community involvement - Supporting our communities, we invest time and money in local schools and non-profit organizations. COMPENSATION AND BENEFITS GEM's offered compensation is dependent on candidates' education, qualifications, and relevant years of experience. To recruit and retain our exceptional staff, we offer the opportunity to elect benefit packages that best suit our employee's needs; this includes, but is not limited to, a competitive Salary, Medical, Dental and Vision Insurance (including HSA & PPO options), Paid Time Off (PTO), Paid Holidays, Life Insurance, and a matching 401(k) Retirement Plan. Please Note : With the exception of mandated state requirements, GEM does not publish salary information on external job boards; as such, most ranges listed are estimates made by vendors and not actual salary ranges. EQUAL OPPORTUNITY EMPLOYER GEM Technologies, Inc. is an Equal Opportunity/Affirmative Action Employer and does not discriminate on the basis of race, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information, veteran status, marital status, pregnancy or related condition, or any other basis protected by law.