Controls engineer jobs in New Mexico - 182 jobs

Project Controls Engineer 3 (JP3023) Compa Industries is searching for qualified candidates for a Project Controls Engineer position at the Los Alamos National Laboratory in Los Alamos, NM. Salary: $60/hr - $65/hr Citizenship: US citizenship Required Work Schedule: 9/80 schedule Clearance: Current Q-clearance needed Per Diem: Approved for those that exceed the radius The Project Controls Engineer plays an integral role in supporting Los Alamos National Laboratory's Earned Value Management System (EVMS) and Project Controls System. This position is pivotal to the Laboratory's ability to track progress, manage costs, and meet project milestones. With a broad range of experience, the engineer will resolve complex challenges creatively and effectively, contribute to the development of new methods, and provide expert guidance that influences the Laboratory's success. Responsibilities And Duties Perform cost estimating, cost analysis, and control activities across various projects. Develop, maintain, and monitor project schedules to ensure timely completion. Support project organizational and administrative functions as needed. Supervise and provide technical guidance on cost engineering and planning/scheduling activities when delegated. Identify trends and deliver analysis to inform project management decisions. Apply Laboratory objectives and professional concepts to resolve issues in innovative ways. Contribute to the creation and refinement of project controls theories, tools, and methods. Coordinate and guide the work of other personnel as needed. Operate independently with significant latitude in setting project objectives and determining methods and procedures. Minimum Qualifications Experience in planning and scheduling functions, including: Schedule development, maintenance, control, and analysis. Experience in cost engineering functions, including cost estimating, cost control, financial tracking, and analysis. Proficiency in personal computer operating systems and multiple discipline-specific software applications. Skilled in oral and written communication. Knowledge of personnel supervision, administration, and training of technical and non-technical staff. Understanding of engineering and construction management principles. Desired Skills Advanced knowledge of Earned Value Management System (EVMS) tools and processes. Experience serving as a Control Account Manager (CAM) or in project controls/project management roles. Strong understanding of project budgeting, scheduling, and corrective action implementation. Ability to produce detailed and accurate project status reports. Proven ability to evaluate complex issues and develop effective solutions using creative problem-solving. Recognized as an expert within the organization with a record of contributions to process and methodology development. Education And Experience Requirements Bachelor's degree in a related field. Minimum of eight (8) years of relevant experience. An equivalent combination of education and experience may be considered. Post-graduate coursework in project controls, engineering, or related disciplines is desirable. Next Steps If you are a driven and highly experienced project controls professional seeking a pivotal role in national security and scientific innovation, we encourage you to apply. Please submit your resume to be considered for this opportunity at Los Alamos National Laboratory. A recruiter from Compa Industries will contact qualified candidates to discuss next steps. Why Work at COMPA Industries? We strive to provide careers, not just jobs, for our employees. We invest in and serve the communities where we work and live. We provide best-in-class administrative, professional, and technical services to solve complex problems to meet customer mission-critical objectives. For over 30 years, Compa has been a trusted partner in progress. We combine decades of technical expertise with a forward-thinking spirit, tackling intricate challenges in nuclear facilities alongside the brightest minds in science and engineering. Join us, and don't just build your career, build the future, with competitive compensation, a collaborative culture, and the chance to make a real difference for national security and beyond. COMPA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or protected Veteran status. COMPA's policy could disqualify an applicant who has certain criminal history from employment in particular positions.

Company: The Boeing Company Boeing Defense, Space and Security (BDS) is looking for an Associate or Mid-Level Controls Engineer (Level 2 or 3) to join our exclusive team at the Starfire Optical Range on Kirtland AFB in Albuquerque, New Mexico. We are seeking a highly skilled individual with experience in controls, system modeling, simulation, and performance optimization. This role will support the hardware, firmware, and software development of electro-optical systems. This is a unique opportunity to contribute to advancements in technology using cutting-edge equipment at a historically significant site. This position supports the R&D mission of the Air Force Research Laboratory Optics Division in their advancement of Space Domain Awareness capabilities. The site houses telescope research facilities ranging in size from 0.5m up to 3.5m with advanced optical systems. You will work as part of a multidisciplinary team supporting the supporting the development, optimization, and maintenance of control solutions. Starfire Optical Range is a world class research facility with recognized achievements, enabled by the quality, enthusiasm, and dedication of our entire team. Our team consists of engineers and technicians in all disciplines required to plan, design, integrate, and test complex optical, electronic, quantum systems to achieve research objectives. Position Responsibilities: Develop high-fidelity mathematical models of dynamic systems (e.g., mechanical, electrical, thermal processes) using first-principles physics and empirical system identification techniques. Analyze system behavior, including stability, linearity, and transient/steady-state responses. Design, develop, and implement advanced control strategies. Utilize industry-standard tools (primarily MATLAB/Simulink) for control system simulation, analysis, and rapid prototyping. Conduct extensive simulations to verify algorithm performance, stability, and robustness under various operating conditions and disturbances. Develop and execute Hardware-in-the-Loop (HIL) and Software-in-the-Loop (SIL) tests for algorithm validation. Perform rigorous tuning and optimization of control parameters to achieve desired system performance metrics (e.g., accuracy, speed, response time, energy efficiency, disturbance rejection). Analyze data from real-world systems to refine and improve control algorithms. Collaborate closely with software/firmware engineers to translate complex control algorithms into executable code (e.g., C/C++, VHDL) for embedded systems, real-time operating systems (RTOS), or FPGA platforms. Create detailed control system design specifications, mathematical derivations, simulation reports, and validation plans. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Basic Qualifications (Required Skills/ Experience): Bachelor of Science degree in Engineering, Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 2+ years with MATLAB and Simulink (including toolboxes like Control System Toolbox, MPC Toolbox, Optimization Toolbox, Simscape, Stateflow) Must be willing to work variable shifts; including day, evening, night, and weekends Preferred Qualifications (Desired Skills/Experience): 3+ years of related work experience or an equivalent combination of education and experience 3+ years in at least one relevant programming language (e.g., C/C++, Python) for algorithm implementation or data analysis 3+ years of professional experience in designing, modeling, and implementing advanced control algorithms for dynamic systems Experience with at least two or more advanced control techniques (e.g., MPC, LQR, robust control, adaptive control) Background in developing robust control systems for telescopes, addressing challenges in pointing accuracy, vibration suppression, and thermal stability Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for Variable shift. Pay and Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Associate (Level 2) Summary pay range: $91,800 - $124,200 Mid-Level (Level 3) Summary pay range: $112,200 - $151,800 Language Requirements: Not Applicable Education: Bachelor's Degree or Equivalent Relocation: Relocation assistance is not a negotiable benefit for this position. Export Control Requirement: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 4 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

Job Title: CONTROLS ENGINEER Department: Operations Reports To: Maintenance Manager FLSA Status: Exempt Summary Researches, develops, designs, and tests electrical components, equipment, and systems by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. · Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. · Designs and directs engineering personnel in fabrication of test control apparatus and equipment, and determines methods, procedures, and conditions for testing products. · Develops applications of controls, instruments, and systems for new commercial, domestic, and industrial uses. · Directs activities to ensure that manufacturing, construction, installation, and operational testing conform to functional specifications and customer requirements. · Directs and coordinates operation, maintenance, and repair of equipment and systems in field installations. · Uses computer assisted engineering and design software and equipment to perform engineering tasks. Supervisory Responsibilities This job has no supervisory responsibilities. EDUCATION, EXPERIENCE AND QUALIFICATIONS: Bachelor Degree, Master's Degree preferred. 3-5 years experience in manufacturing electronics maintenance preferred. Should have experience working in liquid fill or other consumer packaging. Must possess the ability to work with all levels of employees in the organization. Must be well organized, results oriented, & have effective problem solving ability. Must possess strong leadership & team building skills. Must be computer literate - Microsoft Office Programs & AX is desirable. Show good judgment and sound reasoning skills. Must have a strong floor presence and be able to interact effectively with people at all levels. Bilingual English-Spanish preferred. Mizkan America, Inc. is an EO employer - M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status. National origin, citizenship, disability or protected veteran status.

Job Description Controls Systems Engineer Albuquerque, NM Direct/ Perm, hybrid/ flex schedule, 80k-140k Base, Full Benefits, Bonuses, 401k, ESOP, ENR top 500 US Citizens Only This position is responsible for controls engineering project requirements involving PLC programming, As a Controls Systems Engineer, you will be responsible for Hardware, Software, and Field. The ideal Candidate will be tasked with PLC, HMI/ SCADA programming, control panel design, instrumentation specification, check-out support, and commissioning assistance. You will work closely with the clients, project managers, and multidisciplinary teams to deliver integrated control solutions that meet or exceed customer expectations. ROLE/ RESPONSIBILITIES • Develop control system software, including DCS/ PLC programming and implementation, HMI design, and SCADA configuration. • Design, develop, and implement control system logic software and hardware to meet process, machine, and integrated system requirements. • Develop control logic software and user interface applications. • Support hardware engineering (systems integration, instrumentation callout, panel layout, construction) • Develop schematics detailing control system configuration and wiring, and design equipment panel layouts on AutoCAD software. • Technical writing - project definition and requirements, status reporting, process control sequence of operations, RFIs • Support factory/ site acceptance testing, user acceptance testing, and user training REQUIRED/ HIGHLY PREFERRED EXPERIENCE • BSEE or similar • PLCs, HMIs, SCADA systems, and field instrumentation. • Ladder logic, structured text, or function block diagram. • Control system software platforms (e.g., Rockwell/ Allen-Bradley, Siemens, Schneider) and relevant programming environments. • Electrical schematics, Power Distribution, Control panels, P&IDs (Piping and Instrumentation Diagrams), and process control narratives, NEC Code. • Implementing/ testing/ commissioning/ qualifying automation solutions

With over 40 successful years in business with over 35 facilities across the USA this engineering firm has been named on the ENR Top 500 Design Firm list and has continued to climb in rank over the years. In addition, they have been named as a certified integrator by many vendors, as they do not focus on just one platform, but their engineers work with the customer to choose the best platform for each application. With 600 employees nationwide, they have become one of the largest and established firms in the United States. Reasons to work for this company: Opportunity to get involved with challenging projects across many different industries Enjoy 3-day weekends! (You have the option to work 4 10-hour days Monday through Thursday.) Comprehensive medical/dental insurance Mentoring and training. Career growth with both technical and management tracks. Flexible work schedules 401K match and Employee Stock Ownership Plan (Employee-owned) They have a great reputation in the industry and with their customers Job summary You will be responsible for controls engineering project requirements involving PLC programming, HMI/SCADA programming, control panel design, instrumentation specification, check-out support, and commissioning assistance. What you will do: Project execution: Task identification, prioritization, and scheduling with personal accountability to ensure commitments are met. Early problem identification and conflict resolution. Working under the direction of other experienced engineers Continuous improvement: methodology, lessons learned, templates, efficiency tools, etc. to streamline project execution. Direct/frequent communication and interaction with clients. Ensures compliance with all regulations, codes, etc. as they apply to the contract and project(s). Technical writing including project definition and requirements, clearly delineated status reporting, process control sequence of operations, standard practices and procedures, scope of supply, requests for information, customer correspondence, and code commenting. Provide engineering design, development, and implementation including software (DCS/PLC, HMI, etc.). Provide support to the lead engineer for hardware engineering (systems integration, instrumentation callout, panel layout, and construction), and systems design (integration of the various components on any given project). Support factory/site acceptance testing, user acceptance testing, and user training. Programming control logic, graphics construction, device communication, database configuration, etc. Read, interpret, and update documents, drawings, and specifications related to process control and automation projects. Typical documents may include PFDs, P&IDs, single-line diagrams, cable and conduit schedules, instrumentation and control data sheets, I/O lists, etc. To be successful in this role you should possess the following: Education: BA/BS degree in engineering or related discipline (Electrical, Chemical, Controls or Computer Engineering degree preferred). Technical degree and equivalent experience may be substituted. Experience: 3+ years of directly related experience in process control and/or manufacturing and/or information services. PLC, DCS, and/or SCADA/HMI design, development, and deployment experience. Strong leadership and client relation skills. Good engineering and good documentation practice. Experience (or willingness) using collaboration tools (such as SharePoint) to work effectively within remote teams. Computer proficiency with Microsoft Outlook, Excel, and Word. SharePoint experience is a plus. Exceptional verbal and written ability with the aptitude to communicate professionally with clients and project leadership. Must have a valid driver's license and ability to travel up to 25%. It would be great if you had experience with the following: Diverse Process Knowledge: Oil & Gas, Chemicals, etc. Schneider Unity programming experience Allen Bradley ControlLogix programming (PlantPAx a plus) experience. SCADA/HMI experience (AVEVA/Wonderware or ICONICS a plus). Checkout, testing, startup, and commissioning experience To comply with some state laws, the annual base salary range for this position has been provided. The range given is broad and should be considered as a guideline only. Our client will consider a candidate's work experience, education/training, key skills, the salaries of current employees in similar roles, and other factors when extending an offer.

Job Description Protection & Control Engineer/Technician - Field Testing & Commissioning Travel-Heavy Field Role - Up to 80% Join a leading team supporting high-voltage substation projects across transmission, distribution, and generation environments. We're looking for Protection & Control Field Testing Engineers at all experience levels to perform hands-on testing, commissioning, troubleshooting, and documentation of critical P&C systems. Candidates should expect five 10-hour workdays per week. What You'll Do: Test and commission P&C systems on high-voltage substations (15 kV - 500 kV) Perform protective relay testing (SEL, GE, Basler, Beckwith) with Omicron or Doble test sets Execute CT/PT verification, relay calibration, control scheme testing, and dynamic/static testing Interpret electrical drawings, schematics, and logic diagrams; produce detailed field reports Support Project Leads/Field Supervisors and manage clerical/project documentation What You Bring: 5+ years in substation field testing (breakers, transformers, instrument transformers, P&C systems) Proficiency with relay families: SEL-311L, SEL-387, SEL-487, SEL-421, SEL-351S, GE L90/D60, etc. Experience with NETA, IEEE, NFPA, and related standards Knowledge of test software: ProTesT, Protection Suite, ENOSERV RTS, Omicron Test Universe, AcSELerator Quickset Ability to travel extensively (up to 80%) and lift 50+ lbs Preferred: Bachelor's in Electrical Engineering/Electrical Technology Electromechanical relay testing and high-voltage commissioning experience (CTs, CCVTs, PLC/SCADA, DC systems) IEC 61850 testing and commissioning experience Competitive pay and growth opportunities for skilled P&C engineers. Step into a role where every test, every relay, and every report matters.

We have a Senior Controls Engineer position available in Albuquerque, NM. This role provides leadership in delivering automation systems for a variety of industries. The position requires technical proficiency with PLC, DCS, HMI, and SCADA platforms and includes customer interaction, team leadership, system design, programming, and commissioning of control systems. Responsibilities Lead the design, implementation, and commissioning of industrial automation systems, including PLC, DCS, HMI, and SCADA solutions Develop control system architecture, component selection, schematic diagrams, and system documentation Program controllers using Ladder, Sequential Function Chart, Structured Text, and other languages Develop process visualization (HMI/SCADA), databases, and historical data reporting systems Design, detail, and implement fiber, wired, and wireless industrial networks using protocols such as Ethernet/IP, Profinet, and Modbus Provide technical leadership on standards for graphics, alarming, and scale-up Lead and mentor lower-level engineers and technicians; act as technical lead or Project Manager on smaller projects Troubleshoot field devices, equipment, and automation systems Participate in project management activities, including scheduling, budgeting, reporting, and ensuring project profitability Required Qualifications Bachelor of Science degree in Electrical, Control, Mechanical, Chemical Engineering, or Computer Science 10+ years of Controls Engineer experience Proficiency with PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon Proficiency with HMI/SCADA platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and Siemens Knowledge of DCS platforms such as Emerson DeltaV is a plus Experience with industrial networks, fiber/wired/wireless systems, and industrial protocols (Ethernet/IP, Profinet, Modbus) Programming skills in Ladder, Sequential Function Chart, Structured Text, VBA, .NET, and SQL Experience with Power BI, Grafana, and API integration Experience designing electrical schematics, power distribution (480VAC), and control panels with NEC compliance Field device/equipment troubleshooting and job estimating experience Must be local to Albuquerque, NM or have established ties to the area Nice to Have AutoCAD experience Experience with large industrial networks connecting control system components and instrumentation Additional Information Location: Albuquerque, NM (onsite) Work Model: Primarily onsite with leadership responsibilities and travel as required Apply Today If you are a Controls Engineer with deep technical expertise, leadership experience, and Albuquerque residency, we encourage you to apply for this senior role to lead automation projects across multiple industries.

If you post this job on a job board, please do not use company name or salary. Experience level: Mid-senior Experience required: 10 Years Education level: Bachelors degree Job function: Engineering Industry: Industrial Automation Compensation: Total position: 1 Relocation assistance: No Visa sponsorship eligibility: No JOB DESCRIPTION: We have a Controls Engineer position available in our Albuquerque, NM office. This person will provide team leadership in delivering automation systems for a wide variety of industries. This position requires demonstrated technical proficiency in implementing automation solutions with PLC, DCS, HMI, and SCADA platforms. The Senior Controls Engineer will interact directly with the customer and lead a team of Wunderlich-Malec engineers in identifying requirements, developing specifications, and implementing/testing/commissioning/qualifying automation solutions. This position is a leadership role within the business unit and requires strong problem-solving ability, well-balanced people skills, an aptitude for business efficiency, and an interest in creating partnerships. The Senior Controls Engineer demonstrates success by securing repeat work with both new and existing customers. RESPONSIBILITIES: This position requires the ability to deliver innovative automation solutions and design standards either self-directedly or as a leader of a team. The candidate must have the ability to conceptualize, detail, and implement control systems for industrial processes and machinery that meet our customers requirements. This involves the development of a control system architecture, selecting the components to be used, detailing schematic diagrams and system documentation, programming controllers (PLC, DCS, RTU), programming the process visualization (HMI/SCADA), developing databases for archiving/displaying historical system data and implementing/commissioning the control system at the clients facility. Knowledge of controller programming languages such as Ladder, Sequential Function Chart, Structured Text, and others to achieve the desired results is required. Also having knowledge of standard programming languages such as VBA, .NET, and SQL for the development of HMI/SCADA systems is preferred For larger systems, experience with industrial networking used to connect control system components and instrumentation is preferred. The Controls Engineer would design, detail, and implement a variety of fiber, wired, and wireless systems using industrial protocols (Ethernet/IP, Profinet, Modbus, etc.) This position oftentimes requires the following project management responsibilities: developing project execution plans, work breakdown structures and associated budgets, task prioritization and scheduling, task ordering, time tracking and reporting, financial tracking and reporting, early problem identification, conflict management/resolution, leading and supporting a team, and attending project status meetings. Also includes overseeing daily operations and activities of a project(s) up to $1M. This position is often responsible for ensuring the overall profitability of the project The ideal candidate must have a diverse engineering skillset with the ability to work independently. Will act as technical lead on projects and guide lower-level engineers and technicians. Could also act as Project Manager on smaller projects. QUALIFICATIONS: Education Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science is required. Experience 10+ years of Controls Engineer experience with capabilities in below areas: Candidates with Rockwell and Cimplicity experience will be given preference Various 3rd party web-based data integrations for monitoring and troubleshooting aid Develop work processes to automate template and instance development within the System Platform Provide technical leadership on design standards around graphics, alarming, and scale-up SQL, .NET, Power BI, Grafana, and APIs In-depth understanding of PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon In-depth understanding of HMI/SCADA hardware/software platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and Siemens In-depth understanding of DCS hardware/software platforms such as Emerson DeltaV or similar Experience in industries such as Semiconductor chip fabrication facilities, Life Sciences, Building Automation, Food and Beverage, Oil & Gas and Mining Experience in the design of electrical schematics, including power distribution under 480VAC, control panels, and associated NEC references desired Experience with AutoCAD is desired Experience leading a team of engineers/technicians to provide control system solutions Experience mentoring less experienced engineers Professional references, preferably one from each of the following: a subordinate, a peer, and a manager Field device/equipment troubleshooting Job estimating Physical Demands of Position: Seeing, color perception, hearing, clear speech, dexterity in hands, driving, lifting, ability to mount/dismount equipment, pushing and pulling. Working Environment: Standard office environment, on-site office environment, diverse industrial environments, frequent use of personal computer, facsimile/copy machines, phones.

Senior Controls Engineer - Albuquerque, NM (onsite) We have a Controls Engineer position available in our Albuquerque, NM office. This person will provide team leadership in delivering automation systems for a wide variety of industries. This position requires demonstrated technical proficiency in implementing automation solutions with PLC, DCS, HMI, and SCADA platforms. The Senior Controls Engineer will interact directly with the customer and lead a team of engineers in identifying requirements, developing specifications, and implementing/testing/commissioning/qualifying automation solutions. Why work for us? We are a 100% Employee-Owned Company. We offer a comprehensive employee-owner benefit package. Our people are passionate about solving your unique engineering challenges, and with the support of industry experts behind them, they can successfully execute projects of any size while meeting your requirements of scope, schedule, and budget. Must have: Education - Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science is required. Experience - 10+ years of Controls Engineer experience Controls Engineer would design, detail, and implement a variety of fiber, wired, and wireless systems using industrial protocols (Ethernet/IP, Profinet, Modbus, etc.) Controller programming languages such as Ladder, Sequential Function Chart, Structured Text, and others to achieve the desired results Standard programming languages such as VBA, .NET, and SQL for the development of HMI/SCADA systems Provide technical leadership on design standards around graphics, alarming, and scale-up SQL, .NET, Power BI, Grafana, and APIs PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon HMI/SCADA hardware/software platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and Siemens DCS hardware/software platforms such as Emerson DeltaV or similar would be a big plus Experience in industries such as Semiconductor chip fabrication facilities, Life Sciences, Building Automation, Food and Beverage, Oil & Gas and Mining, Water/Wastewater Experience in the design of electrical schematics, including power distribution under 480VAC, control panels, and associated NEC references Field device/equipment troubleshooting Job estimating Must either be local or have ties to the area

Senior Controls Engineer - Albuquerque Albuquerque, NM Must be a US Citizen or Green Card holder. We have a Controls Engineer position available in our Albuquerque, NM office. This person will provide team leadership in delivering automation systems for a wide variety of industries. This position requires demonstrated technical proficiency in implementing automation solutions with PLC, DCS, HMI, and SCADA platforms. The Senior Controls Engineer will interact directly with the customer and lead a team of Wunderlich-Malec engineers in identifying requirements, developing specifications, and implementing/testing/commissioning/qualifying automation solutions. This position is a leadership role within the business unit and requires strong problem-solving ability, well-balanced people skills, an aptitude for business efficiency, and an interest in creating partnerships. The Senior Controls Engineer demonstrates success by securing repeat work with both new and existing customers. RESPONSIBILITIES: This position requires the ability to deliver innovative automation solutions and design standards either self-directedly or as a leader of a team. The candidate must have the ability to conceptualize, detail, and implement control systems for industrial processes and machinery that meet our customers requirements. This involves the development of a control system architecture, selecting the components to be used, detailing schematic diagrams and system documentation, programming controllers (PLC, DCS, RTU), programming the process visualization (HMI/SCADA), developing databases for archiving/displaying historical system data and implementing/commissioning the control system at the clients facility. Knowledge of controller programming languages such as Ladder, Sequential Function Chart, Structured Text, and others to achieve the desired results is required. Also having knowledge of standard programming languages such as VBA, .NET, and SQL for the development of HMI/SCADA systems is preferred For larger systems, experience with industrial networking used to connect control system components and instrumentation is preferred. The Controls Engineer would design, detail, and implement a variety of fiber, wired, and wireless systems using industrial protocols (Ethernet/IP, Profinet, Modbus, etc.) This position oftentimes requires the following project management responsibilities: developing project execution plans, work breakdown structures and associated budgets, task prioritization and scheduling, task ordering, time tracking and reporting, financial tracking and reporting, early problem identification, conflict management/resolution, leading and supporting a team, and attending project status meetings. Also includes overseeing daily operations and activities of a project(s) up to $1M. This position is often responsible for ensuring the overall profitability of the project The ideal candidate must have a diverse engineering skillset with the ability to work independently. Will act as technical lead on projects and guide lower-level engineers and technicians. Could also act as Project Manager on smaller projects. QUALIFICATIONS: Education Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science is required. Experience 10+ years of Controls Engineer experience with capabilities in below areas: Candidates with Rockwell and Cimplicity experience will be given preference Various 3rd party web-based data integrations for monitoring and troubleshooting aid Develop work processes to automate template and instance development within the System Platform Provide technical leadership on design standards around graphics, alarming, and scale-up SQL, .NET, Power BI, Grafana, and APIs In-depth understanding of PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon In-depth understanding of HMI/SCADA hardware/software platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and Siemens In-depth understanding of DCS hardware/software platforms such as Emerson DeltaV or similar Experience in industries such as Semiconductor chip fabrication facilities, Life Sciences, Building Automation, Food and Beverage, Oil & Gas and Mining Experience in the design of electrical schematics, including power distribution under 480VAC, control panels, and associated NEC references desired Experience with AutoCAD is desired Experience leading a team of engineers/technicians to provide control system solutions Experience mentoring less experienced engineers Professional references, preferably one from each of the following: a subordinate, a peer, and a manager Field device/equipment troubleshooting Job estimating Physical Demands of Position: Seeing, color perception, hearing, clear speech, dexterity in hands, driving, lifting, ability to mount/dismount equipment, pushing and pulling. Working Environment: Standard office environment, on-site office environment, diverse industrial environments, frequent use of personal computer, facsimile/copy machines, phones. Required Knowledge, Skills, and Abilities: (Hiring Companies ATS Questions): 1. Do you have a Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science is required. 2. Do you have 10+ years of Controls Engineer experience 3. Do you have experience with Controller programming languages such as Ladder, Sequential Function Chart, Structured Text, and others to achieve the desired results 4. Do you have experience with Standard programming languages such as VBA, .NET, and SQL for the development of HMI/SCADA systems 5. Do you have experience with SQL, .NET, Power BI, Grafana, and APIs 6. Do you have experience with PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon 7. Do you have experience with HMI/SCADA hardware/software platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and Siemens 8. Do you have experience with DCS hardware/software platforms such as Emerson DeltaV or similar 9. Do you have experience with Experience in industries such as Semiconductor chip fabrication facilities, Life Sciences, Building Automation, Food and Beverage, Oil & Gas and Mining 10. Do you have experience with Experience in the design of electrical schematics, including power distribution under 480VAC, control panels, and associated NEC references 11. Do you have experience with Field device/equipment troubleshooting 12. Must either be local or have ties to the area 13. Do you have experience with AutoCAD - Nice to have: 14. Do you have experience with For larger systems, experience with industrial networking used to connect control system components and instrumentation - Nice to have: 15. Must be a US Citizen or Green Card holder

We have a Controls Engineer position available in our Albuquerque, NM office. This person will provide team leadership in delivering automation systems for a wide variety of industries. This position requires demonstrated technical proficiency in implementing automation solutions with PLC, DCS, HMI, and SCADA platforms. The Senior Controls Engineer will interact directly with the customer and lead a team of Wunderlich-Malec engineers in identifying requirements, developing specifications, and implementing/testing/commissioning/qualifying automation solutions. This position is a leadership role within the business unit and requires strong problem-solving ability, well-balanced people skills, an aptitude for business efficiency, and an interest in creating partnerships. The Senior Controls Engineer demonstrates success by securing repeat work with both new and existing customers. RESPONSIBILITIES: This position requires the ability to deliver innovative automation solutions and design standards either self-directedly or as a leader of a team. The candidate must have the ability to conceptualize, detail, and implement control systems for industrial processes and machinery that meet our customers requirements. This involves the development of a control system architecture, selecting the components to be used, detailing schematic diagrams and system documentation, programming controllers (PLC, DCS, RTU), programming the process visualization (HMI/SCADA), developing databases for archiving/displaying historical system data and implementing/commissioning the control system at the clients facility. Knowledge of controller programming languages such as Ladder, Sequential Function Chart, Structured Text, and others to achieve the desired results is required. Also having knowledge of standard programming languages such as VBA, .NET, and SQL for the development of HMI/SCADA systems is preferred For larger systems, experience with industrial networking used to connect control system components and instrumentation is preferred. The Controls Engineer would design, detail, and implement a variety of fiber, wired, and wireless systems using industrial protocols (Ethernet/IP, Profinet, Modbus, etc.) This position oftentimes requires the following project management responsibilities: developing project execution plans, work breakdown structures and associated budgets, task prioritization and scheduling, task ordering, time tracking and reporting, financial tracking and reporting, early problem identification, conflict management/resolution, leading and supporting a team, and attending project status meetings. Also includes overseeing daily operations and activities of a project(s) up to $1M. This position is often responsible for ensuring the overall profitability of the project The ideal candidate must have a diverse engineering skillset with the ability to work independently. Will act as technical lead on projects and guide lower-level engineers and technicians. Could also act as Project Manager on smaller projects. QUALIFICATIONS: Education Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science is required. Experience 10+ years of Controls Engineer experience with capabilities in below areas: Candidates with Rockwell and Cimplicity experience will be given preference Various 3rd party web-based data integrations for monitoring and troubleshooting aid Develop work processes to automate template and instance development within the System Platform Provide technical leadership on design standards around graphics, alarming, and scale-up SQL, .NET, Power BI, Grafana, and APIs In-depth understanding of PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon In-depth understanding of HMI/SCADA hardware/software platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and Siemens In-depth understanding of DCS hardware/software platforms such as Emerson DeltaV or similar Experience in industries such as Semiconductor chip fabrication facilities, Life Sciences, Building Automation, Food and Beverage, Oil & Gas and Mining Experience in the design of electrical schematics, including power distribution under 480VAC, control panels, and associated NEC references desired Experience with AutoCAD is desired Experience leading a team of engineers/technicians to provide control system solutions Experience mentoring less experienced engineers Professional references, preferably one from each of the following: a subordinate, a peer, and a manager Field device/equipment troubleshooting Job estimating Physical Demands of Position: Seeing, color perception, hearing, clear speech, dexterity in hands, driving, lifting, ability to mount/dismount equipment, pushing and pulling. Working Environment: Standard office environment, on-site office environment, diverse industrial environments, frequent use of personal computer, facsimile/copy machines, phones. About Wunderlich-Malec: As a 100% Employee-Owned Company our people are passionate about solving your unique engineering challenges, and with the support of industry experts behind them, they can successfully execute projects of any size while meeting your requirements of scope, schedule, and budget. Wunderlich-Malec has been providing customers with engineering, system integration and fabrication solutions for more than 40 years. With offices throughout the US and over 500 professionals on our staff, we are one of the largest and most well-established engineering companies in the United States, and we've successfully finished numerous projects for our US clients in many parts of the world. We're confident that our qualified staff has the knowledge, experience, and talent to create and deliver the solutions you need for your facility process and operation needs. Wunderlich-Malec ranks on Inc. 5000's Fastest-Growing Private Companies list and is a GSA Schedule holder with the Federal Government for professional engineering services and manufacturing. Working Place: Albuquerque, New Mexico, United States

We have a Controls Engineer position available in our Albuquerque, NM office. This person will provide team leadership in delivering automation systems for a wide variety of industries. This position requires demonstrated technical proficiency in implementing automation solutions with PLC, DCS, HMI, and SCADA platforms. The Senior Controls Engineer will interact directly with the customer and lead a team of Wunderlich-Malec engineers in identifying requirements, developing specifications, and implementing/testing/commissioning/qualifying automation solutions. This position is a leadership role within the business unit and requires strong problem-solving ability, well-balanced people skills, an aptitude for business efficiency, and an interest in creating partnerships. The Senior Controls Engineer demonstrates success by securing repeat work with both new and existing customers. RESPONSIBILITIES: This position requires the ability to deliver innovative automation solutions and design standards either self-directedly or as a leader of a team. The candidate must have the ability to conceptualize, detail, and implement control systems for industrial processes and machinery that meet our customers requirements. This involves the development of a control system architecture, selecting the components to be used, detailing schematic diagrams and system documentation, programming controllers (PLC, DCS, RTU), programming the process visualization (HMI/SCADA), developing databases for archiving/displaying historical system data and implementing/commissioning the control system at the clients facility. Knowledge of controller programming languages such as Ladder, Sequential Function Chart, Structured Text, and others to achieve the desired results is required. Also having knowledge of standard programming languages such as VBA, .NET, and SQL for the development of HMI/SCADA systems is preferred For larger systems, experience with industrial networking used to connect control system components and instrumentation is preferred. The Controls Engineer would design, detail, and implement a variety of fiber, wired, and wireless systems using industrial protocols (Ethernet/IP, Profinet, Modbus, etc.) This position oftentimes requires the following project management responsibilities: developing project execution plans, work breakdown structures and associated budgets, task prioritization and scheduling, task ordering, time tracking and reporting, financial tracking and reporting, early problem identification, conflict management/resolution, leading and supporting a team, and attending project status meetings. Also includes overseeing daily operations and activities of a project(s) up to $1M. This position is often responsible for ensuring the overall profitability of the project The ideal candidate must have a diverse engineering skillset with the ability to work independently. Will act as technical lead on projects and guide lower-level engineers and technicians. Could also act as Project Manager on smaller projects. QUALIFICATIONS: Education Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science is required. Experience 10+ years of Controls Engineer experience with capabilities in below areas: Candidates with Rockwell and Cimplicity experience will be given preference Various 3rd party web-based data integrations for monitoring and troubleshooting aid Develop work processes to automate template and instance development within the System Platform Provide technical leadership on design standards around graphics, alarming, and scale-up SQL, .NET, Power BI, Grafana, and APIs In-depth understanding of PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon In-depth understanding of HMI/SCADA hardware/software platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and Siemens In-depth understanding of DCS hardware/software platforms such as Emerson DeltaV or similar Experience in industries such as Semiconductor chip fabrication facilities, Life Sciences, Building Automation, Food and Beverage, Oil & Gas and Mining Experience in the design of electrical schematics, including power distribution under 480VAC, control panels, and associated NEC references desired Experience with AutoCAD is desired Experience leading a team of engineers/technicians to provide control system solutions Experience mentoring less experienced engineers Professional references, preferably one from each of the following: a subordinate, a peer, and a manager Field device/equipment troubleshooting Job estimating

Wunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is: 100% employee-owned with 40+ years of industry history A Top 5 Systems Integrator Giant ENR Top 500 Firm We have a Senior Electrical Engineer position available in Albuquerque, NM. This person will interact directly with the customers and Wunderlich-Malec engineers and drafters in identifying requirements, developing specifications, and implementing/testing/commissioning/qualifying electrical solutions. The engineer researches systems ideas and draws up plans for power and control at 480 VAC and below, including instrumentation and control devices. Please Note: This role isn't scheduled to sponsor a work visa, candidates requiring a work visa sponsorship are unable to be considered for this role. The engineer is responsible for reviewing and developing system specifications and drawing packages. The engineer conducts factory tests as needed. In addition, they provide support throughout the construction and commissioning of the electrical and control systems they have designed including installation and wiring, check-out support, and commissioning/qualification. As a Senior Engineer, they may be required to manage a team of engineers to meet overall schedule requirements. They will be responsible for overall quality. During proposal phases, they should be experienced with developing a scope of work and cost estimate of hours for the deliverables. They will Project Manage jobs of various sizes. Ideally, the candidate is also interested and experienced with PLC or DCS programming, HMI/SCADA programming, network design, and/or IT/OT equipment. Major Responsibilities Responsible for 480 VAC designs and drawings including motor branch circuits, power distribution and transformation, MCC design and specification, and electrical equipment specification Responsible for hazardous area design including Class I Div. 1 and Div. 2 code and design requirements Instrument specification, wiring, troubleshooting, and calibration Develops schematics detailing control system configuration and wiring, and design equipment panel layouts. This effort includes the ability to architect and specify control system designs and give work direction to technicians creating the drawings Knowledge of the NEC and associated national, state, and local code requirements Work at customer sites to perform the system checkout and start-up of electrical, instrumentation, and control systems Develop the final record system documentation and provide system training to the customer Individual will be working on electrical and control system integration projects for clients across multiple industries including life sciences Must have a diverse engineering skill set with the ability to work independently. Should be able to handle multiple projects simultaneously. May act as Technical Lead or Project Manager. This includes but not limited to: Develops scope of work and cost estimates for the deliverables Develops and executes implementation plans for the project Assigns work to meet overall project deadlines Ensures that all project team members clearly understand the scope of W-M responsibilities and deliver quality output Develop schedules for WM and customer requirements Evaluate progress on projects and details changes Responsible for all purchasing and subcontractor requirements Responsible for the development of costs and proposal of change orders to contract scope Minimum Requirements Education A Bachelor of Science degree in Electrical Engineering, Electrical/Electronics Engineering Technology or equivalent experience is required. Interest in progressing to a PE license will be supported. Experience 10 years of experience with capabilities in below areas: Preparation of electrical, instrumentation, and PLC control panel specifications for purchase of materials and equipment and/or the solicitations of labor Experience in design of electrical schematics, including power distribution 480VAC and under Experience in the installation, checkout, and commissioning of electrical, instruments, and control systems Knowledge of the NEC and associated national, state and local code requirements; includes hazardous area requirements Familiar with construction, installation, maintenance, support, documentation, and testing activities to ensure compliance with specifications, codes, and customer requirements Familiar with construction and installation standards and specifications for use by electrical contractors Document and organize projects according to established procedures using various tools including computer software such as CAD, Excel, and Visual Manufacturing Review of fabricator and external design drawings, documentation and fabrication sequence Provide cost estimates for electrical controls according to established guidelines Monitor status and ensure delivery of project deliverables within budgeted cost and schedule Experience in industries such as Life Sciences, Building Automation, Food and Beverage, Oil & Gas and Mining Strong interpersonal, verbal and written communication skills needed. Ability to communicate and work with both team members, subcontractors and clients Experience with PLC programming is preferred Experience with AutoCAD is desired Professional references, preferably one from each of the following: a subordinate, a peer, and a manager Ability to travel up to 25% Physical Demands of Position Seeing, color perception, hearing, clear speech, dexterity in hands, driving, lifting, ability to mount/dismount equipment, pushing and pulling. Working Environment Standard office environment, on-site office environment, diverse industrial environments including hazardous area classification spaces, frequent use of personal computer, facsimile/copy machines, phones. *Job Descriptions are not exhaustive lists of all skills, responsibilities, or efforts associated with a job. They reflect principal job elements essential for performing the job and evaluating performance. Wunderlich-Malec is proud to offer a comprehensive employee-owner benefit package. Full-time employees may be eligible for the following benefits: Medical • Dental • Vision • Basic and Supplemental Life and AD&D • Long Term Disability • Voluntary Short Term Disability • Healthcare & Dependent Care Flexible Spending Accounts • Health Savings Account • Paid Time Off (PTO) • Paid Holidays • Tuition Reimbursement • Referral Bonus Program • 401(k)/Profit Sharing • 100% ESOP (Employee Stock Ownership Plan) • Employee Assistance Program • Will Preparation Resources • Worldwide Travel Assistance #LI-Hybrid #LI-WM1

Automation Controls Engineer III , Albuquerque, NM Build your future at Curia, where our work has the power to save lives. Curia is a global contract development and manufacturing organization (CDMO) with over 30 years of experience partnering with pharmaceutical and biotech companies to provide life-saving treatments to patients. At Curia, we are on a mission to advance our customers' therapies from curiosity to cure and ultimately to improve patients' lives. We proudly offer Generous benefit options (eligible first day of employment) Paid training, vacation and holidays (vacation accrual begins on first day of employment) Career advancement opportunities Education reimbursement 401K program with matching contributions Learning platform And more! Summary: The Automation Controls Engineer III serves as a senior technical resource, leading the maintenance, optimization, and strategic enhancement of control and data acquisition systems for manufacturing, packaging, and support equipment at the site. This includes Supervisory Control and Data Acquisition (SCADA) systems, Programmable Logic Controllers (PLC), and Human Machine Interface (HMI) devices. In addition to providing expert technical review and counsel, this role drives complex troubleshooting efforts, mentors junior engineers, and leads initiatives to improve efficiency, reliability, and lifecycle management. The Engineer III also evaluates and implements advanced automation technologies, ensuring alignment with site objectives, industry best practices, and long-term business goals. Essential Duties and Responsibilities: Serve as a senior technical resource for the maintenance, optimization, and strategic enhancement of automation and data acquisition systems, including SCADA, PLC, and HMI devices, across manufacturing, packaging, and support operations. Define, prioritize, and achieve complex technical goals and objectives; lead cross-functional collaboration with internal teams, external contractors, and technology vendors to ensure timely and effective project execution. Schedule, oversee, and evaluate the work of external trade and technology partners for automation-related equipment, facilities, and utilities, ensuring adherence to quality, safety, and GMP standards. Lead investigations into quality deviations related to automated equipment, driving root cause analysis, corrective actions, and long-term reliability improvements. Initiate, draft, and lead change requests and engineering documentation for automated systems, including SOPs, PMs, and technical manuals, ensuring compliance with site and regulatory requirements. Provide advanced programming and integration support for building monitoring systems, HMI displays, and other automation platforms; maintain up-to-date engineering drawings, system documentation, and software licenses. Identify, propose, and implement cost-effective automation upgrades and modifications to existing or new production equipment, ensuring strategic alignment with site automation goals and business objectives. Lead complex projects with minimal oversight, balancing quality, validation, production, and regulatory considerations in all decision-making. Mentor and provide technical guidance to junior engineers and technicians, fostering skill development and knowledge sharing. Support Validation and Computer Systems Validation activities to ensure compliance with industry standards and regulatory expectations. Continuously evaluate and recommend emerging automation technologies to improve efficiency, reliability, and lifecycle management of systems. Read/interpret SOPs to ensure compliance Maintain up to date trainings Other duties as assigned Education and Experience: Bachelor's Degree in Electrical or related engineering Minimum of five (5) years' experience in automation integration PLC and HMI experience (i.e., Rockwell, Allen Bradley, Siemens, and Simatic) Supervisory Responsibilities: This role does not have supervisory responsibilities, yet it may involve mentoring, guiding, and advising. Language Skills: The ideal candidate should have the ability to read and interpret various documents, such as safety instructions, standard operating procedures, technical procedures, and governmental regulations. Additionally, they should possess strong written and verbal communication skills, along with effective presentation skills. Mathematical Skills: Proficient in executing arithmetic operations including addition, subtraction, multiplication, and division across various units of measurement, employing whole numbers, fractions, decimals, and percentages. Candidates must possess a strong grasp of algebraic and geometric principles. Reasoning Ability: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Computer Skills: The ideal candidate will possess a strong technical foundation and proven capability in effectively utilizing diverse software tools to streamline the organization's daily functions. Essential skills encompass adeptness in manufacturing and internet software, alongside proficiency in Microsoft Office tools including PowerPoint, Excel, Word, and Outlook. Other Skills and Abilities: Provides guidance and mentorship to team members Fosters a collaborative and positive work environment Champions change Promotes a safe and healthy work environment by actively identifying and addressing potential hazards, following established safety protocols, participating in safety training programs, and fostering a culture of awareness and responsibility among team members. Demonstrates strong attention to detail Exceptional verbal and written communication skills, with the ability to convey complex technical concepts clearly and effectively. Strong organizational skills, capable of managing multiple projects, priorities, and deadlines in a fast-paced environment. Proficient in reading, interpreting, and applying technical documentation, specifications, and work instructions. Effective interpersonal skills with the adaptability to collaborate across diverse teams and achieve organizational objectives. Demonstrated ability to present ideas and information in a clear, logical, and grammatically accurate manner. Preferred experience in the design and implementation of building management systems and cleanroom aseptic facilities. In-depth knowledge of applicable regulatory requirements and standards, including OSHA, EPA, FDA, JP, EU, and other relevant agencies. Able to read and understand the point-to-point control schematics and sequence of operations Troubleshoot and resolve complex control system issues in an emergency and corrective maintenance capacity within a production environment and upgrading existing equipment with strong technical writing and analytical communication skills. Other Qualifications: Must pass a background check Must pass a drug screen May be required to pass Occupational Health Screening May be required to obtain and maintain gowning certification Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The essential physical demands will vary for each Curia position. All positions may require regular or occasional lifting, pushing and pulling up to 10 pounds, frequently; up to 25 pounds occasionally; and up to 50 pounds infrequently. Additionally, all positions entail regular sitting, standing and reaching, with some roles requiring prolonged periods of time for each activity. Visual acuity, both close and distant, along with depth perception is necessary in each role, with or without corrective lenses. Please note that employees are prohibited from wearing contact lenses in work areas with exposure to cleaning agents. Hand and finger dexterity are integral to all positions, with specific activities varying from typing to manipulating maintenance tools or operating keypads, switches, and buttons. Occasional stooping, kneeling, twisting, crouching, crawling and balancing are also part of each position's physical requirements. Certain roles may involve climbing and working at elevated heights as well. Work Environment: The work environment characteristics, described below, are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The working environments will vary for each Curia position. The employee may be required to work in an office, manufacturing, or warehouse environment. The office environment is designed for comfort and productivity, with room temperature settings maintained for optimal working conditions. It is common to hear conversational noise in the background. The pharmaceutical manufacturing environment is sterile. Therefore, aseptic gowning is required. Personal protective equipment (nitrile gloves, clean room socks, face-shields, safety glasses, aprons, steel-toed shoes and powered air purifying respirators) is necessary, depending upon the task at hand. The employee may be exposed to wet and/or humid conditions, confined areas, and refrigerator or freezer temperatures when working in a sterile environment. The warehouse environment is typically set at a controlled temperature but the employee may be exposed to refrigerator or freezer temperatures when retrieving materials. Some positions may occasionally be exposed to moving mechanical parts, elevated heights, airborne particles, electrical activities and vibration. In addition, some positions may work with or be exposed to, compressed gases and must wear ear protection. All environments may be subject to working with or being exposed to cleaning agents. Education, experience, location and tenure may be considered along with internal equity when job offers are extended. We do not accept unsolicited assistance from any headhunters or recruitment firms for any of our job openings. All resumes or profiles submitted by search firms to any employee at Curia, in any form without a valid, signed search agreement by an authorized signatory in place for the specific position, approved by Talent Acquisition, will be deemed the sole property of Curia. No fee will be paid in the event the candidate is hired by Curia because of the unsolicited referral. All interested applicants must apply online. Please be aware of scammers. Curia will only send offer letters and requests for sensitive personal information from a curiaglobal.com email address. Curia is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Curia is an E-Verify employer.

Basic Function HF SInclair is seeking a Control Systems Engineer. This position conducts complex engineering assignments for the Process & Controls Engineering Group and functions as a technical specialist, formulating and developing moderately complex engineering concepts. Provides Engineering and technical guidance for process control, instrumentation, measurement technologies, process control project scope and estimates. Understands all applicable process technology, equipment, and control systems.Job Duties Applies engineering principles to create control schemes and the execute projects and assignments that include independent evaluation, selection, and substantial adaptation and modification of standard techniques, procedures, and criteria Estimates the cost and feasibility of a given project, supervises contractors and field activities and provides discipline-specific engineering assistance, direction, and development assistance to colleagues depending on the assignment Designs, implements, and maintains DCS systems (including switches, routers, stations, controllers, I/O, and servers), including planning and implementing equipment upgrades to deal with obsolete equipment Partners with the project engineers to define the SCADA-specific hardware for the control portions of pipeline and terminal projects Interprets P&ID drawings and other schematics, providing guidance and feedback as it relates to instrumentation, automation, and controls of the SCADA system Reviews and provides guidance and feedback on Cause and Effect matrices, Instrumentation Indexes, and Control Narratives to identify issues regarding the implementation, startup, and continuous operation of SCADA systems Ensures compliance with all safety standards and practices Provides operations support for the Midstream control environment and SCADA control environment. This includes troubleshooting and maintaining base level and advanced process control strategies and monitoring key process indicators of control system health and providing technical support of installed systems Develops and implements advanced process control strategies using existing/future May be required to do some or all of the following: Participates in advance troubleshooting of existing process control code, conduct appropriate root-cause investigations to identify problem areas in the PLC's and Aveva I/A systems, Process Control code, Operator Interface or hardware and ensure corrective actions are implemented to address any identified gaps with stakeholder's input. Assists plants in meeting corporate cyber security requirements and maintain malware, virus protection etc for existing operating systems. Use manufacturing experience and understanding of process limitations to assist in plant optimization efforts. Leads or participates in Process Hazard Analyses, Management of Change, Pre-Startup Safety Reviews, and Incident Investigations. Strong troubleshooting skills to assist with the deployment, startup, testing, commissioning and abnormal operations of SCADA systems Reviews plans and prepare or review technical specifications, contract documents, and estimates Upgrades, designs, configures, maintains, enhance, and monitor related equipment and performance Reviews outside vendors' proposals regarding the purchase of new or modernization of existing processing equipment Special assignments or tasks assigned to the employee by their supervisor, as determined from time to time in their sole and complete discretion Experience A minimum of 10 years of progressive work experience in Process, Automation, and Controls Engineering. PREFERRED EXPERIENCE: Instrumentation & Electrical Technician expertise (including PLC). Pipeline or Petrochemical industry experience. Maintaining Process Control Network (PCN) component systems, including Process Control System (PCS). Familiarity with ISA Safety Instrumented System requirements. Designing/Implementing/Troubleshooting process controls (including tuning expertise and Advanced Process Controls). Advanced process control techniques and programming for asset optimization. Education Level A minimum of a Bachelor's Degree in Engineering or Bachelor's degree coupled with equivalent field experience as defined in the essential job duties/responsibilities section. PREFERRED EDUCATION: Chemical Engineering degree.Required Skills PLC programming and process control design. Ability to read and fully understand P&ID's, one-lines, instrument drawings and other documents describing the scope of work. Ability to troubleshoot and implement existing PLC logic to facilitate the project startup. Experience with I/O detailed wiring and termination. Familiarity with AutoCAD and MS Office suite. Expertise in I&C design and industry practices for the oil & gas industry. Experience with instrumentation, hazardous location wiring practices, panel design, and PLC hardware. Ability to stay abreast of new technology developments and processes is essential. Ability to communicate effectively with others, strong verbal communication skills, advanced level of reading and writing, and ability to perform advanced mathematical calculations. Familiar with the configuration and setup of VFDs, soft starters, control valves, and actuators. Knowledgeable on multiple PLC platforms including GE, Emerson, and Rockwell. Competency in the setup and configuration of flow computers, including, OMNI, ABB Flow-x, and Spirit Flow X. Familiar with telemetry including radio networks and wireless communications Supervisory/Managerial Responsibility May be responsible for supervising contractors depending on assignment. May be responsible for providing work direction to the broader SCADA support team.Work Conditions Office and field-based with up to 25% travel required. Subject to varying weather conditions and required to work in all temperatures, including outdoors Benefits HF Sinclair offers a comprehensive benefits package designed to support the well-being of our employees and their families. Our benefits include, but are not limited to, the following: Medical Insurance Vision Insurance Dental Insurance Paid Time-Off 401(k) Retirement Plan with match Educational Reimbursement Parental Bonding Time Employee Discounts We are committed to fostering a supportive and inclusive work environment, ensuring our employees have the resources needed to thrive professionally and personally. Benefit eligibility is governed by official plan documents, for more details visit Total Rewards.Physical Requirements Job conditions require standing, walking, sitting, talking or hearing, making visual inspections, making precise hand and finger movements, lifting or carrying up to 50 lbs, climbing up to 200 ft, perceive color differences, required to wear personal protective equipment as needed and a respirator in emergency situations (beards are not permitted). Depending on location must satisfactorily complete a comprehensive medical physical examination. Job conditions may require twisting, stooping, crouching, kneeling, reaching or grasping, and working in confined spaces as permitted.Our One HF Sinclair Culture: At HF Sinclair, we are united through our One HF Sinclair Culture, which is underpinned by our five core values of Safety, Integrity, Teamwork, Ownership and Inclusion. Developed to empower our people, our five core cultural values are at the heart of everything we do and extend to how we engage our stakeholders. These values influence our decisions, shape our behaviors and keep us connected across the entire organization. We maintain a true Safety culture for our employees, communities, environments and customers. Our goal is to make sure everyone returns home safely each day. We have a long-standing commitment to Integrity and ethical behavior and do what is right for our employees, investors, communities and the environment. We encourage employees to Step Up and Stand Out by championing a culture of Teamwork and Ownership. We foster a culture of Inclusion by encouraging diversity of experiences, viewpoints and backgrounds. What makes each of us different, together makes us stronger About HF Sinclair Corporation HF Sinclair Corporation, headquartered in Dallas, Texas, is an independent energy company that produces and markets high-value light products such as gasoline, diesel fuel, jet fuel, renewable diesel and other specialty products. HF Sinclair owns and operates refineries located in Kansas, Oklahoma, New Mexico, Wyoming, Washington and Utah and markets its refined products principally in the Southwest U.S., the Rocky Mountains extending into the Pacific Northwest and in other neighboring Plains states. HF Sinclair supplies high-quality fuels to more than 1,500 branded stations and licenses the use of the Sinclair brand at more than 300 additional locations throughout the country. In addition, subsidiaries of HF Sinclair produce and market base oils and other specialized lubricants in the U.S., Canada and the Netherlands, and export products to more than 80 countries. Through its subsidiaries, HF Sinclair produces renewable diesel at two of its facilities in Wyoming and also at its facility in Artesia, New Mexico. HF Sinclair provides petroleum product and crude oil transportation, terminalling, storage and throughput services to its refineries and the petroleum industry.Equal Opportunity Employer HF Sinclair Corporation is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status or any other prohibited ground of discrimination.

Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Overview Help Accepting applications Open & closing dates 12/22/2025 to 12/21/2026 Salary $63,795 to - $164,301 per year Pay scale & grade GS 11 - 15 Locations Few vacancies in the following locations: Eielson AFB, AK Elmendorf AFB, AK Fort Richardson, AK Maxwell AFB, AL Show morefewer locations (79) Little Rock AFB, AR Davis Monthan AFB, AZ Luke AFB, AZ Beale AFB, CA Edwards AFB, CA El Segundo, CA Los Angeles, CA March AFB, CA Travis AFB, CA Vandenberg AFB, CA Air Force Academy, CO Buckley AFB, CO Cheyenne Mountain AFB, CO Colorado Springs, CO Peterson AFB, CO Schriever AFB, CO Joint Base Anacostia-Bolling, DC Dover AFB, DE Cape Canaveral, FL Cape Canaveral AFS, FL Eglin AFB, FL Homestead AFB, FL Hurlburt Field, FL MacDill AFB, FL Patrick AFB, FL Tyndall AFB, FL Dobbins AFB, GA Moody AFB, GA Robins AFB, GA Hickam AFB, HI Mountain Home AFB, ID Scott AFB, IL Grissom AFB, IN Barksdale AFB, LA Hanscom AFB, MA Westover Air Reserve Base, MA Andrews AFB, MD Linthicum Heights, MD Selfridge ANG Base, MI Whiteman AFB, MO Columbus AFB, MS Keesler AFB, MS Malmstrom AFB, MT Grand Forks, ND Minot AFB, ND Offutt AFB, NE New Boston, NH McGuire AFB, NJ Cannon AFB, NM Holloman AFB, NM Kirtland AFB, NM Nellis AFB, NV Niagara Falls, NY Wright-Patterson AFB, OH Youngstown, OH Youngstown, OH Altus AFB, OK Tinker AFB, OK Vance AFB, OK Charleston, SC Shaw AFB, SC Arnold AFB, TN Dyess AFB, TX Fort Sam Houston, TX Goodfellow AFB, TX Kelly AFB, TX Lackland AFB, TX Laughlin AFB, TX Randolph AFB, TX Hill AFB, UT Alexandria, VA Arlington, VA Dahlgren, VA Fort Eustis, VA Langley AFB, VA Pentagon, Arlington, VA Fairchild AFB, WA McChord AFB, WA Warren AFB, WY Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Multiple Work schedule Full-time Service Competitive Promotion potential 15 Job family (Series) * 0855 Electronics Engineering Supervisory status No Security clearance Secret Drug test No Position sensitivity and risk Noncritical-Sensitive (NCS)/Moderate Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status No Announcement number AFPCDHA-12857056-0855-CYBER Control number 852987000 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Clarification from the agency This public notice is to gather applications that may or may not result in a referral or selection. Duties Help * Duties and responsibilities vary and may increase according to grade level * Use engineering manuals, standard publications, and technical material to obtain information and pertinent data for use by higher level engineers, contractors and/or customers. * Keep abreast of emerging technologies and professional developments to maintain currency in the field and for application to work assignments. * Perform duties in support of the installation, operations, and maintenance of weapon systems, subsystems, facilities, machinery, and/or support equipment. * Perform developmental assignments in the application of established principles, techniques, methods, and procedures of professional electronics engineering in the area of installation, operations, and maintenance. Requirements Help Conditions of employment * Please read this Public Notice in its entirety prior to submitting your application for consideration. * U.S. Citizenship is required * Males must be registered for Selective Service, see *********** * Total salary varies depending on location of position * If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: ***************************************** * Recruitment incentives may be authorized * Position may be subject to random drug testing * Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays * Shift work and emergency overtime may be required * Employee must maintain current certifications * A security clearance may be required * Disclosure of Political Appointments * Full/part-time employees occupying direct childcare positions are eligible for discounts IAW DAF AFSVC/CC Memo, 30 Sep 22; first child 100% / each additional child 25%. Other assigned CYP and FCC personnel are eligible for 25% discount. Qualifications BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: GS-11: At least one year of specialized experience equivalent to at least the GS-09 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Modeling and simulation professional theories, concepts, principles, techniques, and practices of computer engineering, electronics engineering and/or computer science. GS-12: At least one year of specialized experience equivalent to at least the GS-11 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Leading and/or performing engineering work involving electronic circuits, circuit elements and equipment systems; applying a number of diverse electronics engineering practices, techniques and processes to identify and resolve complex engineering issues; supporting the planning, testing and troubleshooting of electronics engineering systems or devices; and, developing computer aided engineering analysis and tools in support of planning and designing applications. GS-13: At least one year of specialized experience equivalent to at least the GS-12 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-14: At least one year of specialized experience equivalent to at least the GS-13 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-15: At least one year of specialized experience equivalent to at least the GS-14 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): * Knowledge of electronics engineering concepts, principles, methods, techniques, and standard engineering practices to perform moderately difficult or relatively limited phases of a larger and more complex installation, operations, and maintenance engineering project. * Knowledge of computer aided design and drafting (CADD) programs to perform design and drafting assignments, as well as other computer applications used in support of plans, analysis, and project reports. * Skill in applying the principles, concepts, and practices of the occupation sufficient to perform limited assignments in the field of electronics engineering. * Ability to communicate factual and procedural information clearly, orally and in writing. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation. FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying. Additional information For Direct Hire (DHA) Positions: This is a Direct Hire Public Notice, under this recruitment procedure applications will be accepted for each location/ installation identified in this Public Notice and selections are made for vacancies as they occur. There may or may not be actual/projected vacancies at the time you submit your application. Interagency Career Transition Assistance Program (ICTAP): For information on

Looking for an opportunity to work with a talented team and expand your experience in supporting Weapons Test and Evaluation (T&E) projects? SSI needs to add an Electronic Engineer to support our current list of services provided to the U.S. Navy. These positions, located at the White Sands Missile Range (WSMR) in White Sands, New Mexico, will provide engineering, technical, logistics, and administrative support in the planning, maintenance, preparation, execution, launch operations and post-test phases to the W Department of the Navy Surface Warfare Center, Port Hueneme Division (NSWC PHD). Primary Functions: Research, design, modify, develop, and evaluate systems, products, components, and applications by applying fundamental RF engineering principles. Apply engineering principles in area of system to include RF, power, AC/DC circuit, communications, and software principles. Confirm system's and components' capabilities by designing testing methods; testing properties and conducts testing events Assure product quality by designing testing methods; testing finished products and system capabilities. Troubleshoot and resolve satellite/radio frequency antenna systems issues. Responsible for antenna fabrication, characterization and verification. Responsible for the fabrication, characterization and verification for ground-based systems, emitters /receivers and related assemblies. Responsible for creating and providing a verification plan and test report for all fabrications. May evaluate field installations and recommend design modifications to eliminate system malfunctions. Conduct research into design studies. Develop standards and guidelines for tasks being performed Prepare necessary engineering documentation, i.e., drawings, project specifications, procedures, etc. If this aligns with your experience and sounds like it is the career path you wish to progress, these are the requirements to be considered for this position: Education/Experience/Skills: High School Diploma or equivalent. Experienced in antenna fabrication, characterization and verification to include wrap conformal and patch type antennas built to a government requirement. Experienced with ground based systems and emitters / receivers. Knowledge of WSMR operations Ability to deploy to both CONUS and OCONUS locations Desired: Master's degree in a technical discipline plus 10 years work experience supporting military / weapons systems. CONTINGENT OFFER This position is contingent upon contract award and is anticipated to start in May of 2023. Must possess a valid driver's license. U.S. Citizenship and must be able to obtain and maintain U.S. DoD SECRET Security Clearance required for hire, and to be maintained throughout employment. All candidates will be required to pass background screening to include SSN, Driver Record, and Criminal Background Investigation. What You Can Expect from Us Positive Office environment Professional and knowledgeable team and leadership Business Office hours What's In It for Me? Competitive salary Great benefits, including: Company-subsidized PPO Medical, Dental, and Vision coverage 401(k) Retirement Plan with company match Paid Time Off 10 Paid Holidays per year Education Assistance Company-subsidized Corporate Fitness Program Medical and Dependent Care Flexible Spending Accounts Company-paid Life and Accidental Death and Dismemberment Insurance with an option to increase coverage. Company-paid Short- and Long-term Disability Insurance Company-paid Employee Assistance Program Flexible hours Opportunities for on-the-job training What Your Experience Working for Us Will Be Like Ask any of our employees and they will tell you SSI is a great place to work with an upbeat and positive culture. We take pride in our work to continuously improve on our performance in a manner that enhances the mission of the agencies we serve while expanding opportunities for our employees and our company. What You'll Enjoy About Where We're Located We are located one hour north of Los Angeles in the heart of Ventura County, a relaxing and diverse community conveniently located near The Collection shopping center, beaches, hiking, and restaurants. About Synectic Solutions, Inc. (SSI) Synectic Solutions, Inc. (SSI), is an award-winning, 20-year government contracting agency focused on the areas of logistics, engineering, management, and information technology. SSI is a growing organization committed to exceeding customer expectations, to continually improving all products, services, and processes, and to perform all work with the commitment to upholding the highest standards and ethics. Ready to apply? If this job sounds like a fit for you, then click on the ‘apply' button below. Good luck!

Project Controls Engineer 4 Compa Industries is searching for qualified candidates for a Senior Project Controls Engineer position at the Los Alamos National Laboratory in Los Alamos, NM. Salary: $81/hr - $87/hr Location: Los Alamos, NM (Onsite) Citizenship: US citizenship Required Work Schedule: 9/80A schedule Clearance: Q-clearance or Top Secret Clearance needed The Project Controls Engineer will play a critical role in supporting the Earned Value Management System (EVMS) and the broader Project Controls System at Los Alamos National Laboratory (LANL). This position significantly influences the success of high-impact projects through expert cost engineering, scheduling, and project management support. The specialist will contribute to developing advanced techniques and standards, guiding project teams, and ensuring projects remain on schedule and within budget. Responsibilities and Duties Perform cost estimating, cost analysis, and control activities for highly complex projects. Supervise and provide technical direction for planning/scheduling and cost engineering activities. Develop and maintain project schedules and monitor progress against milestones. Prepare, review, and present detailed cost engineering and scheduling reports. Analyze cost trends and schedule performance for management attention. Provide innovative solutions to project control challenges and guide technical teams. Act as a subject matter expert in EVMS tools and processes. Utilize independent judgment to determine the best course of action for achieving project objectives. Work under consultative direction and with minimal supervision to meet long-range project goals. Support project administrative and organizational tasks, including financial reporting and status updates. Minimum Qualifications Demonstrated experience in project controls functions, including: Planning and scheduling (development, control, analysis) Cost engineering (estimating, control, financial reporting, and analysis) Proficiency in multiple software applications used for project controls and cost analysis. Delta COBRA Experience with supervision, personnel administration, and technical training. Understanding of financial reporting systems and cost control procedures. Ability to work independently with wide latitude in methods and evaluation criteria. Desired Skills Subject matter expertise in project management and EVMS. Proven ability to implement corrective actions and monitor project progress. Familiarity with engineering principles related to technical project implementation. Knowledge of control account management (CAM) duties and responsibilities. Strong analytical skills with the ability to develop innovative solutions to complex issues. Viewed as an expert in the field with the ability to guide the development of future concepts and project methodologies. Education and Experience Requirements Bachelor's degree in a relevant field. Minimum of twelve (12) years of related experience. An equivalent combination of education and experience may be considered. Post-graduate coursework or certifications in project controls or engineering disciplines is preferred. Next Steps If you are a driven and highly experienced project controls professional seeking a pivotal role in national security and scientific innovation, we encourage you to apply. Please submit your resume to be considered for this opportunity at Los Alamos National Laboratory. A recruiter from Compa Industries will contact qualified candidates to discuss next steps. Why Work at COMPA Industries? We strive to provide careers, not just jobs, for our employees. We invest in and serve the communities where we work and live. We provide best-in-class administrative, professional, and technical services to solve complex problems to meet customer mission-critical objectives. For over 30 years, Compa has been a trusted partner in progress. We combine decades of technical expertise with a forward-thinking spirit, tackling intricate challenges in nuclear facilities alongside the brightest minds in science and engineering. Join us, and don't just build your career, build the future, with competitive compensation, a collaborative culture, and the chance to make a real difference for national security and beyond. COMPA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or protected Veteran status. COMPA's policy could disqualify an applicant who has certain criminal history from employment in particular positions.

Job Title: CONTROLS ENGINEER Department: Operations Reports To: Maintenance Manager FLSA Status: Exempt Summary Researches, develops, designs, and tests electrical components, equipment, and systems by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. · Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. · Designs and directs engineering personnel in fabrication of test control apparatus and equipment, and determines methods, procedures, and conditions for testing products. · Develops applications of controls, instruments, and systems for new commercial, domestic, and industrial uses. · Directs activities to ensure that manufacturing, construction, installation, and operational testing conform to functional specifications and customer requirements. · Directs and coordinates operation, maintenance, and repair of equipment and systems in field installations. · Uses computer assisted engineering and design software and equipment to perform engineering tasks. Supervisory Responsibilities This job has no supervisory responsibilities. EDUCATION, EXPERIENCE AND QUALIFICATIONS: Bachelor Degree, Master's Degree preferred. 3-5 years experience in manufacturing electronics maintenance preferred. Should have experience working in liquid fill or other consumer packaging. Must possess the ability to work with all levels of employees in the organization. Must be well organized, results oriented, & have effective problem solving ability. Must possess strong leadership & team building skills. Must be computer literate - Microsoft Office Programs & AX is desirable. Show good judgment and sound reasoning skills. Must have a strong floor presence and be able to interact effectively with people at all levels. Bilingual English-Spanish preferred. Mizkan America, Inc. is an EO employer - M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status. National origin, citizenship, disability or protected veteran status.