Controls engineer jobs in Philadelphia, PA

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

Job Description Protection & Control Engineer/Technician - Field Testing & Commissioning Travel-Heavy Field Role - Up to 80% Join a leading team supporting high-voltage substation projects across transmission, distribution, and generation environments. We're looking for Protection & Control Field Testing Engineers at all experience levels to perform hands-on testing, commissioning, troubleshooting, and documentation of critical P&C systems. Candidates should expect five 10-hour workdays per week. What You'll Do: Test and commission P&C systems on high-voltage substations (15 kV - 500 kV) Perform protective relay testing (SEL, GE, Basler, Beckwith) with Omicron or Doble test sets Execute CT/PT verification, relay calibration, control scheme testing, and dynamic/static testing Interpret electrical drawings, schematics, and logic diagrams; produce detailed field reports Support Project Leads/Field Supervisors and manage clerical/project documentation What You Bring: 5+ years in substation field testing (breakers, transformers, instrument transformers, P&C systems) Proficiency with relay families: SEL-311L, SEL-387, SEL-487, SEL-421, SEL-351S, GE L90/D60, etc. Experience with NETA, IEEE, NFPA, and related standards Knowledge of test software: ProTesT, Protection Suite, ENOSERV RTS, Omicron Test Universe, AcSELerator Quickset Ability to travel extensively (up to 80%) and lift 50+ lbs Preferred: Bachelor's in Electrical Engineering/Electrical Technology Electromechanical relay testing and high-voltage commissioning experience (CTs, CCVTs, PLC/SCADA, DC systems) IEC 61850 testing and commissioning experience Competitive pay and growth opportunities for skilled P&C engineers. Step into a role where every test, every relay, and every report matters.

About Us: BW Design Group is a fully integrated architecture, engineering, construction, system integration, and consulting firm committed to helping our clients realize their most critical goals from Strategy to Commercialization. As the only firm born from a manufacturing technology company to become an independent and fully integrated firm, we combine deep domain expertise in the manufacturing environment with an approach that is built to serve the dynamic needs of our clients. Rooted in our distinct culture of Truly Human Leadership, we cultivate the leaders who will define tomorrow and partner with our clients in the food & beverage, life sciences, industrial, and advanced technology industries to build the future of manufacturing and technology. Barry-Wehmiller is a diversified global supplier of engineering consulting and manufacturing technology for the packaging, corrugating, sheeting and paper-converting industries. By blending people-centric leadership with disciplined operational strategies and purpose-driven growth, Barry-Wehmiller has become a $3 billion organization with nearly 12,000 team members united by a common belief: to use the power of business to build a better world. : Controls Engineer Who You'll Work With You will join one of our 45 offices in the US, be part of a committed team of over 1500 professionals, and work in teams and directly with our clients doing work that is shaping the world around us. You will be welcomed into a rapidly growing business and team and empowered to make an impact. You will be valued, cared for, and challenged on your path to becoming a world-class professional consultant and surrounded by leaders who are committed to creating an environment that enables you to realize your own success and fulfillment. When you join Design Group as a Controls Engineer, you are joining a team that will challenge you and position you for growth. Design Group is widely known as an industry leader, recognized as a top system integrator, ranking #7 in the 2023 System Integrator Giants; as a Rockwell Platinum Integrator, the highest designation given to Rockwell partners; and as an Ignition Enterprise Premier Integrator. As a part of this team, you will learn from industry leading experts and may even have the chance to be an active participant in industry events like the Ignition Build-A-Thon which Design Group won in 2023! In this role, you will work with a team of industry experts to help the world's leading companies solve their most difficult problems. You will join our Control System Integration Practice and partner with seasoned leaders, technical specialists, and subject matter experts to deliver the highest quality solutions to our clients with consistency and accuracy. What You'll Do You'll work individually and in teams to support capital projects and implement solutions for our clients. Together, you will help our clients make critical changes to improve their performance and realize their most important goals. Develop automation solutions and participate in various phases of automation projects including creating design specifications, software configuration and testing, and the commissioning and start-up of a variety of high speed and other automated manufacturing processes Design automation control systems and create project documentation and drawings to meet client requirements Diagnose automation problems Interface with teams, clients and vendors Configure software and hardware packages according to client design specifications Program PLCs (Allen-Bradley, Rockwell) and HMI/SCADAs (FactoryTalk, Cimplicity, Wonderware, Ignition) Communicate plan progress to project stakeholders Manage engineering projects Manage project deliverables to agreed schedule and scope Manage site construction and installation Manage site start-up support of integrated control systems Validate and commission facility systems following established execution protocols, and ensure the successful turnover of the system to the customer Make an impact day-to-day with your skills and expertise, strengthening that relationship with our clients and team What You'll Bring A track record of proficiency in control systems, troubleshooting, and high intensity environments A minimum of three years of direct experience as a controls engineer working on automated processes/system integration in a food, beverage, consumer health product, or other industrial manufacturing environment Experience in creating and designing automation controls systems (PLC, SCADA) A solid understanding of industrial control panel design and fabrication (UL508A) A solid understanding of instrumentation and controls (I&C) A solid understanding of engineering documentation (P&IDs, process flow diagram, standard operating procedures) Experience with field instrumentation, control system installation, and configuration Familiarity with machine safety applications, electrical power distribution, and control panel design Proficiency in written and verbal technical communication, including generating reports and conducting group presentations A willingness to travel for project requirements including installation and start-up activities, client and company sponsored meetings, trainings, industry related seminars, forums, and conventions A bachelor's degree in electrical, mechanical, chemical engineering or similar technical field (preferred) Our culture and commitment to our people is what sets us apart. We foster an environment of mutual respect, integrity, and unconditional interest in the individual and collective success of our professionals. Our model and entrepreneurial mindset offer a rewarding, challenging, and highly flexible path. As a Controls Engineer, you will build a meaningful and fulfilling career with the support of professional development resources and mentorships including our First Year Experience program, Individual Development Plans, and Career Path resources and tools. You will be surrounded by exceptional talent who will support your development as both a world-class engineer and a highly effective leader. Feel like you're on the path to becoming a Controls Engineer but you're not quite there yet? We'd love to connect with you to see if we can take you from where you are today and grow you into a Design Group Engineering Consultant. #LI-TH1 Additional Job Description Assist with developing engineering and functional system specifications based on sales, customer, and technical personnel Assist with programming hardware/software to support machine-based control systems Assist with and/or maintain program documentation related to diagnostics, information systems, data collection and communication with other peripheral equipment Furnish documentation to product assembly and may assist with check-out, machine installation and startup of basic mechanical functionality and control system software Design and develop basic electrical equipment Prepare basic schematics, assemblies and bills of material with a focus on controls systems architecture Travel to customer sites to support commissioning and startup of industrial equipment Other duties as assigned At Barry-Wehmiller we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work-therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. Barry-Wehmiller is an equal opportunity employer. M/F/D/V This organization uses E-Verify. Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments. Company: Design Group

At DuPont, our purpose is to empower the world with essential innovations to thrive. We work on things that matter. Whether it's providing clean water to more than a billion people on the planet, producing materials that are essential in everyday technology devices from smartphones to electric vehicles, or protecting workers around the world. Discover the many reasons the world's most talented people are choosing to work at DuPont. Why Join Us | DuPont Careers The Automation and Process Controls Engineer will support Cyrel packaging printing plate manufacturing, Utilities, and other site business units. Continued technical and professional development is required in this position to ensure the facility remains up to date on control system technology. They will drive improvement through advanced control techniques, various automation tools, and Lean/Six Sigma. Prioritizing day-to-day support for various manufacturing operations at Parlin site is also a key responsibility. Responsibilities: Provides leadership in automation and process control to ensure 24/7 plant operations are properly configured and supported. Offers PLC/DCS and start-up support to facilities to meet business needs and production schedules. Develops adequate basic data for CapEx projects and offers resourcing support in commissioning, decommissioning, start-up, and shut down of projects. Leads and manages complex control system related issues troubleshooting and root cause analysis. Applies knowledge and industry standards to support the successful operation of process control applications and solutions including project support, hardware design, drawings, software design, PSSR, commissioning, and start-up. Develops, reviews, maintains, and updates related documentation, files, procedures, databases, schematics, and drawings to ensure unit instrument and process control technology integrity. Leads the site's alarm management program, sets up rationalization, and schedules periodic meetings with areas for continuous improvement. Participate in monthly meetings and quarterly audits on electrical safety. Collaborates closely with cross-functional site teams, including operations, maintenance/utility, IT, capital engineering, and technical manufacturing resources to understand business, production units, and priorities. Identifies minor capital improvement automation projects, develops their scope, and leads these projects' execution. Networks and leverages the broader organization as needed. May offer occasional on-call support as required. Qualifications: B.S. degree or higher in Electrical Engineering or related field with 3+ years of experience in developing and commissioning process control applications. Demonstrated expertise in DCS/PLC architecture, configuration, and troubleshooting, including Rockwell, Aveva, Wonderware platforms. Demonstrated knowledge and understanding of Instrumentation & Process Control engineering concepts and design including circuits, control systems, as well as a general knowledge of mechanical equipment and systems. Preferred qualifications: Fundamental understanding of Process Safety Management (PSM) systems and High Hazard Processes. Demonstrated knowledge on manufacturing automation integration. Demonstrated success in managing and leading both long-term programs/projects as well as addressing short-term operational issues. Demonstrated ability to plan, prioritize and manage multiple, complex, time-sensitive projects. #LI-JS1 Join our Talent Community to stay connected with us! DuPont is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information. DuPont offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page.

Visual Sound is seeking an experienced A/V Systems Design Engineer for Command & Control environments. This position is based out of our Corporate Office in Broomall, PA. The A/V Systems Design Engineer will oversee the design, install, and maintenance of audio-visual systems for environments including, emergency operations centers, data centers, and control rooms. The ideal candidate will possess expertise in AV technology, network proficiency, and cybersecurity. Responsibilities: Demonstrates technical skills, product knowledge, and terminology of the Command-and-Control space Manages the design and integration of complex AV systems for mission-critical environments to meet operational needs Maintains AV expertise in video wall technology, networked AV, and meeting room solutions Ensures AV systems operate reliably and provides seamless service for uninterrupted performance Collaborates on system designs that emphasize user experience and respond to clients' changing needs Manage complex projects and work with project management teams Troubleshoot and maintain systems with a focus on high availability and rapid response

If you are an engineering professional looking for an opportunity to grow, Emerson has an exciting opening for you! Based in our Cranberry Township, PA location, you will be part of the Hydro Controls Engineering group which provides fully engineered control system solutions for Hydro power plants mostly in North America. The group focuses on the replacement of existing governor control systems and related equipment and provides all project management, engineering design, system integration, testing, and commissioning services to deliver comprehensive turnkey solutions to our customers. In this Role, Your Responsibilities Will Be: * Take the lead on many aspects of retrofit engineering solutions mainly in the North American Hydro power industry * Develop and craft Hydro Governor and Plant Control systems * Understand technical specifications to develop or apply mechanical, hydraulic, or electrical controls. * Craft new system functionality as specified by the customer * Understand and program various control logic styles (Ladder Logic, Structured Text, Flow Diagrams) * Work with and understand electrical and hydraulic schematics * Adapt Programmable Logic Controller (PLC) and Human Machine Interface (HMI) software for new custom applications * Support Factory Acceptance Tests (FATs) * Commission new systems at customer sites * Build control narratives and hardware/software test procedures * Become a domain authority (SME) for Hydro related controls systems and plant operations Who You Are: You develop and project a can-do attitude. You stay aligned with your goals and stay productive. You build the customer relationships. For this Role You Will Need: * Bachelor's degree in engineering, technical field or equivalent * 2+ years of relevant experience (in controls and automation) * Proficiency in computer aided design software * A strong desire and curiosity to understand the way things work * Strong, quick, and creative troubleshooting skills in a technical and mechanical setting * Ability to travel up to 30% to support projects (domestic and possibly some international) * Legal authorization to work in the United States without sponsorship now or in the future Preferred Qualifications that Set You Apart: * Experience as a Controls Engineer, working with PLC's and/or DCS, Ovation preferred * Previous experience with Turbine Govenors Systems &/or Hydro Control Units * Ability to analyze engineering designs of logic or digital circuitry, motor controls, instrumentation, or data acquisition for implementation into new or existing automated, servo mechanical, or other electromechanical systems * AutoCAD experience Our Culture & Commitment To You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Learn more about our Culture & Values. #LI-SD1

Who we are: Inductotherm was founded on simple principles, People, Products and Partnership-to provide the foundry industry with efficient and advanced induction equipment. Our core values of customer service, quality and reliability, value, along with design and technology have been the keys to our continued success. We help the metal casting industry grow stronger through our advanced technologies, continuous education and ongoing support. We strive to continue to manufacture the highest quality equipment and work towards ensuring that the equipment is the most efficient to promote a sustainable environment. What you will do The candidate will conduct research and development of inverters, including power circuits, control algorithms and protection. Will be required to test and troubleshoot control PCB and power circuits. Essential Functions Mathematics: Calculus and differential equations. Physics: Mechanics, electricity and electromagnetics. Electrical disciplines: Electrical circuit analysis, analog and digital control systems design: Micro-controller, FPGA, PCB design, and circuit simulation such as PSpice. Power circuits: inverter, rectifier, power supplies, filters, transformers, capacitors and inductors Semiconductors devices: Diodes, SCRs and IGBTs. Computer skills: Microsoft Word, Excel, Power Point, and C/C++. Conduct research and develop new inverters, including power circuit, control algorithms and protection. Test and troubleshoot control PCB and power circuits. Familiar with test and measuring equipment: meter, scope, probes, etc. Work independently and exercise good judgment with no direct supervision. Able to travel worldwide. Will handle miscellaneous duties as assigned. Non-Essential Functions Computer skills: Altium/OrCAD Capture, PSpice, Mathcad, AutoCad and/or Solid Works or equivalent. Essential Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Read and understand information and ideas presented in writing. Listen to and understand information presented through spoken words and sentences. Communicate information and ideas, written and verbally so others will understand. Able to work any shift. Hold a valid driver's license and able to drive an automobile. Able to travel on short notice by public transportation including (i.e.: aircrafts, trains, bus, cars) domestically and internationally. Non-Essential Physical Requirements: Must disclose any surgical implants, pins, braces or other devices that could be affected by induction fields. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. What you will bring BSEE or MSEE What we Offer / Why Choose Inductotherm Competitive Salary Monthly Incentive Bonus Employee Discounts Profit Sharing Plan Health/Dental/Vision within 30 days Tuition Assistance 401(k) Condition of Employment: Must be able to satisfactorily complete the Inductotherm Corp. hiring process requirements which includes a comprehensive assessment, drug testing, and a background check. The Company complies with the Drug-Free Workplace Act of 1988 and federal laws and regulations. Inductotherm Is E-Verified. All offers of employment are contingent upon the successful completion of the E-Verify process to confirm eligibility to work in the United States.

Who We Are At Partnerize, we're on a mission to transform the way businesses grow. We've built the leading partnership automation platform that empowers brands to discover, engage, and convert their audiences at scale. From affiliate marketing to influencer collaborations, we help our clients build and manage profitable partnerships that drive real results. We're a team of passionate problem-solvers who are dedicated to helping our clients win in the ever-evolving world of digital marketing. Why Join Us We're looking for passionate, talented people who want to be part of a winning team. At Partnerize, you'll find a culture of collaboration, innovation, and respect. We're guided by our core values, and we're committed to creating an environment where everyone can do their best work. We also offer a competitive salary, generous benefits, and a flexible work environment that allows you to thrive both personally and professionally. If you're ready to grow your career and make a difference, we'd love to hear from you. Head of AI Automation (Hands-On IC) Own and build Partnerize's AI automation platform from the ground up. Partnerize is developing a next-generation Agentic AI system to power intelligent automation across our global performance marketing ecosystem. Our platform processes billions of events daily - and we are building AI capabilities that match this scale. We are seeking a Head of AI Automation (Hands-On IC) to lead the design, architecture, and delivery of our agentic AI framework. This role is the senior-most technical authority on AI automation at Partnerize - a deeply hands-on builder role with light leadership responsibilities. This is the role for someone who wants autonomy, ownership, and the chance to build foundational systems that last. What You'll Do Ownership & Leadership * Own the technical strategy and execution for Partnerize's enterprise-wide agentic AI platform. * Lead the internalisation of all knowledge from external consultant partners. * Act as the internal subject-matter expert and final decision-maker for AI automation strategy. * Mentor AI Automation Engineers and shape a high-performance engineering culture. Hands-On System Building * Architect and build scalable agentic systems using LangGraph, Vertex AI, Redis, and Gemini. * Lead the design of RAG pipelines, agent orchestration, tool-use flows, semantic memory layers, and evaluation frameworks. * Build and maintain the internal "Agent Blueprint" to standardise agent design at scale. * Ship reliable, well-architected, production-ready systems. Cross-Functional Collaboration * Partner with Product to define feasibility, complexity, and prioritisation. * Work with Architecture and Data Science leadership to align technical strategy with company objectives. * Communicate decisions crisply and succinctly across engineering and non-engineering partners. What You Bring Technical Depth * Proven experience building and scaling agentic AI systems in production. * Deep experience with GCP and Vertex AI (including Pipelines, Model Registry, Feature Store). * Strong Python engineering background and hands-on DevOps understanding. * Expertise in LLMs, embeddings, RAG optimisation, evaluation metrics, and vector DBs (Redis preferred). Leadership & Communication * Experience acting as a senior IC (Principal/Staff/Architect) with ownership of major initiatives. * Ability to make fast, confident decisions in ambiguous environments. * Strong mentorship instincts with the ability to simplify complexity clearly. Why Partnerize? * Total ownership of our AI automation platform. * High autonomy and direct impact on company-wide AI strategy. * Build systems that operate at global scale (billions of events/day). * Set foundations for a team that will grow under your leadership. US Benefits & Perks * Flexible Time Off Policy - Take the time you need * Enhanced Parental Leave: 16 weeks for birth parent, 8 weeks for non-birth parent at full * pay after one year employment * Robust Company Sponsored Health & Welfare Benefits * 401k Plan - 4% employee match * Enhanced Wellness Program including access to EAP, Wellness Coaching & Wellness * Fridays program * Regular company events and activities Our Commitment to Diversity & Inclusion We are committed to attracting, developing, and advancing our outstanding team members, regardless of race, ethnic identity, sexual orientation, religion, age, gender, gender identity, physical abilities, or any other dimension of diversity. We strive to foster an environment where people can be their authentic selves, raise concerns and innovate, all without fear; where they are treated fairly and respectfully, have equal access to opportunities and resources and can contribute fully to the organization's success. Every individual in our business is expected to live this commitment without exception. Privacy and data protection. The data collected as part of this application will be used for the recruitment process and any subsequent employment. You can find further information in Partnerize privacy policy here: ************************************** Notice to Recruiters and Staffing Agencies: To protect the interests of all parties, Partnerize will not accept unsolicited resumes from any source other than directly from a candidate or an approved vendor that has a written and signed agreement in place with Partnerize. Please do not contact or forward resumes to our company employees or locations. Any unsolicited resumes will be considered Partnerize property. Partnerize is not responsible for any charges or fees related to unsolicited resumes.

Job Description Electrical Controls Technician As an Electrical Controls Technician, you will be primarily responsible for performing Factory Acceptance Testing (FAT's) on electrical assemblies and systems. This role involves researching, developing, drafting, and testing electrical systems to ensure they meet specified requirements. We are seeking a candidate with a background in electrical or electronic engineering, strong communication skills, and the ability to manage multiple projects simultaneously. Direct experience within Project Management would be a plus, not a requirement. Key Responsibilities: Conduct Factory Acceptance Testing (FAT) for electrical assemblies and systems. Research and develop electrical assemblies and systems. Draft detailed schematics and design documents. Test and evaluate electrical systems for functionality and compliance. Troubleshoot and resolve issues related to electrical designs and systems. Serve as the primary point of contact for customers and manage project communications. Oversee multiple projects and tasks, ensuring timely and efficient completion. Qualifications: Bachelor's degree in electrical engineering, Electronics, or a related field is preferred. Although the standard requirement is an Associate's degree, we are looking for candidates with a four-year degree. Six months to one year of relevant experience or training; or an equivalent combination of education and experience. No PLC programming experience required. Close vision, and color vision ability required Safely and effectively lifting, carrying, and moving objects of varying weights Bending, stooping, reaching, balancing, standing, and walking for extended periods and maintaining the necessary physical dexterity and coordination Working in various environmental conditions, which may include exposure to varying temperatures, and noise levels at times Language Skills: Ability to read and interpret safety rules, operating instructions, maintenance manuals, and procedure documents. Proficient in writing routine reports and correspondence. Strong communication skills for effective interaction with customers and team members. Mathematical Skills: Competence in calculating proportions, percentages, area, circumference, and volume. Ability to apply basic algebra and geometry concepts. Reasoning Ability: Ability to solve practical problems and handle a variety of concrete variables with limited standardization. Proficient in interpreting instructions presented in various formats, including written, oral, diagrammatic, or scheduled forms. What we offer: A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member To be a part of a well-established team that values hard work, innovation & knows the value of its people Coaching and mentoring, helping team members realize their potential, aiding in defining goals and executing them We have an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management Competitive base package Continuous training - we are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success Competitive health-care package Our goal as leaders is to provide value, value to our clients, vendors and more importantly to our team - YOU! Looking forward to getting to know you... We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

WHO WE ARE As an employer, the City of Philadelphia values inclusion, integrity, innovation, empowerment, and hard work above all else. We offer a vibrant work environment, comprehensive health care and benefits, and the experience you need to grow and excel. If you're interested in working with a passionate team of people who care about the future of Philadelphia, start here. What We Offer: Impact - The work you do here matters to millions. Growth - Philadelphia is growing, why not grow with it? Diversity & Inclusion - Find a career in a place where everyone belongs. Benefits - We care about your well-being. The City of Philadelphia is a Public Service Loan Forgiveness Program qualified employer. Learn more here: *************************************************************************** Equal Access to Civil Service Testing The City of Philadelphia is an Equal Opportunity employer and does not permit discrimination based on race, ethnicity, color, sex, sexual orientation, gender identity, religion, national origin, ancestry, age, disability, marital status, source of income, familial status, genetic information or domestic or sexual violence victim status. If you believe you were discriminated against, call the Philadelphia Commission on Human Relations at ************ or send an email to *****************. For more information, go to: **************************** The City of Philadelphia is committed to ensuring access to Civil Service examinations by providing appropriate accommodation for candidates with documented medical or religious reasons. Candidates may request accommodation for a Civil Service examination by contacting the Office of Human Resources (OHR) at ************ or by email at *************************. The accommodation process is interactive and requires cooperation and communication between the applicant and OHR. Decisions will be made on a case-by-case basis using the required documentation that is submitted. Requests are to be made in a timely manner prior to the scheduled date of the Civil Service examination. Only an on-line application will be accepted for this exam. Paper applications will not be accepted. Computers are available in the 3-1-1 Walk-In Center located in Room 167 of City Hall (Weekdays from 9 AM to 5 PM) and at your local Philadelphia Free Library branch. For inquiries regarding City employment, contact the Office of Human Resources Monday through Friday between 8 AM and 4 PM by telephone at ************ or by email at ******************** Information concerning employment with the City of Philadelphia may be found at: * work.phila.gov * ************************************************************************************ * ************************* * ************************ * ************************* * *********************************

Job Description The technician position requires the integration of electronic, pneumatic and hydraulic components for automated machinery and conveyors. Use of small hand tools, ability to read a tape measure. Wire electrical panels and devices. Reports to Power Distribution Foreman. Responsibilities: Wiring and integration of Industrial Machinery Control Enclosures. Wiring electrical control panels efficiently in a high-volume production setting. Reading and interpreting electrical schematics and B.O.M./drawings, engineering prints/specifications, and/or verbal/written instructions Responsible for laying out, machining, populating and wiring of electrical control enclosures Assembly of mechanical, and/or pneumatic components as required Use common hand tools, drill, taps, saws, knockout punches, and multi-meter Verify work performed by checking continuity or simulated functional test to determine proper component circuitry that meets operational requirements May require operation of forklift, if so training will be provided Assist mechanical assembly department Assist with equipment installations, which may require daily and/or overnight travel Requirements: 1-3 years' experience using the skills mentioned above preferred Experience in wiring electrical controls panels, UL 508A experience is a plus Read and interpret schematics and electrical specifications as required. Experience with industrial hydraulic machinery Working knowledge of AC & DC control circuits, including single and three-phase motor control, PLC terminology/function and basic knowledge of measuring instruments and meters The ability to work with and understand electromechanical functionality Knowledge of applicable codes, standards and regulations Good interpersonal skills and ability to successfully handle a multi-tasked role in an organized fashion Must communicate with engineering to work through issues using email, teams, phone calls and in person communication Strong computer skills, capable of working with all Microsoft Office applications Strong time management and organization skills. Must be able to work independently and successfully complete multiple assignments in a deadline driven environment Benefits: Medical/Dental/Vision/Disability effective first of the month after the hire date PTO accrual begins upon hire Referral bonuses 100% employee-owned plus 401k with company match

Description: The Electrical/Controls Technician is responsible for maintenance, proper operation, and troubleshooting of all mechanical and electrical systems on production and support equipment. Essential Duties and Responsibilities: Support and manage all control components within a PLC system. Perform maintenance activities within a manufacturing environment on production and support equipment. Incorporates LOTO procedures as required by policy. Dismantles devices to gain access to impacted areas and repair/remove defective parts. Determines, by use of regular inspections, the repair and maintenance work necessary to prevent breakdowns. Inspects used parts to determine changes in dimensional requirements if the parts are reusable, and what parts, if any need to be ordered. Adjusts functional parts of devices and control instruments not performed by machine operators to ensure proper operation. Repairs electrical equipment within the limitations of expertise and training. Sets up and operates lathe, drill press, grinder, and other tools to make and repair parts. Removes tools and cleans impacted work areas upon completion of work. Initiates purchase orders for parts and machines. Makes recommendations concerning equipment and/or procedure modifications. Locates and sets production machinery as required by production schedule. Performs and assures all duties are carried out in a safe and conscientious manner. Maintains a positive attitude when interacting with Asher's team members and customers. Performs other job-related duties in area of responsibility as assigned. Requirements: Work Environment/ Physical Demands: Employee must be willing to be frequently exposed to moving mechanical parts, wet or humid weather conditions, high precarious places, fumes or airborne particulates, toxic or caustic chemicals, outside weather conditions, high frequency vibrations, and noise levels requiring hearing conservation protection. Frequently required to stand, walk, and reach with hands and arms for an 8-hour shift. Employees must frequently lift and/ or move up to 35 pounds without the aid of material handling equipment. Accountabilities: Responsible Maintenance Manager A. Report problems that cannot be resolved immediately Qualifications: Ability to read, write, and communicate in English Must have experience in a high-speed manufacturing environment Supervisory Responsibilities: None Education: Must have a High School Diploma or GED equivalent Experience: Needs to have acquired 1-3 years related experience and/ or training. Equivalent combination of education and experience preferred Must have working knowledge of PLC Systems and associated software & ability to trouble-shoot controls and low voltage systems Knowledge and Skills: Basic knowledge of the following: three phase electrical systems, welding and machine shop practices, HVAC systems, plumbing and pneumatics, conveyors and conveying systems, and ability to read and complete preventative maintenances as assigned Mechanical and standard electrical skills Travel Requirements: None This is intended to convey essential information to understand the scope of the job, the general nature, and level of work performed by job holders. This job description isn't an exhaustive list of qualifications, skills, efforts, duties, responsibilities, or working conditions, which may be changed from time to time based upon business needs.

Job Description The Automation/Robotics Engineer will work with the Manufacturing, Maintenance, and Engineering teams in the development and implementation of automation in mechanical assembly, fixturing and inspection processes. This will include design, specification, directing and managing vendors, installation and qualification of automated systems and equipment. Role and Responsibilities: Update, modify, and continuously improve existing controls systems including robotic programs, ladder logic programs, relay logic, electrical distribution, motor controls, operator interface, hydraulics, and pneumatics distribution and control. Coordinate between engineering and maintenance on existing machine control modifications to robotic, electrical, electronic, hydraulic, pneumatic, and vision systems. Integrate robotics with peripherals, such as controllers or other equipment. Conduct research on robotic technology to create new robotic systems or system capabilities. Investigate mechanical failures or unexpected maintenance problems. Schedule and complete back-ups of all electronic machine control and robotic programs. Build, configure, and test robots. Responsibility in the development and implementation of automation in mechanical assembly, fixturing and inspection processes, including design, specification, directing and managing vendors, installation and qualification of automated systems and equipment. Document robotic application development, maintenance, or changes. Install new robotic systems. Repair and modify wiring in control panels. Build or assemble robotic devices or systems. Develop robotic path motions to maximize efficiency, safety and quality. Ensure all electrical drawings are kept up to date. Assist maintenance department in supporting production. Lead various process/continuous improvement projects. Perform other duties as required. Skills and Abilities Must have thorough understanding of design, manufacturing, and automated systems. Experience with Fanuc robots and numerical control systems and Allen Bradley PLCs. Knowledge of CAD software, including AutoCAD 2D and Inventor. Strong attention to detail, analytical and critical thinking skills, and the ability to think outside of the box to solve problems. Ability to work well individually as well as part of a team. Microsoft Office experience (Excel, Word, Outlook). Exceptionally strong verbal and written communication skills. Required to spend time in both office and manufacturing plant settings. While performing the duties of this job, the employee occasionally works in outside weather conditions. The employee occasionally works near moving mechanical parts and in high, precarious places. The noise level in the work environment is usually moderate. Physical Requirements: Ability to travel as required. Ability to sit, work, collaborate on a computer as needed. Ability to stand for periods of time as needed. Qualifications and Education Requirements: Bachelors in Robotics, MFG Engineering or related field desired, Advanced degree preferred. Comparable Industry experience working in a plant setting as a process engineer, controls engineer, or automation engineer or electrical technician and associate degree may qualify in lieu of 4-year Engineering degree. New Hudson Facades is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at ******************* Job Function: R&D Product Development Job Sub Function: Robotics Job Category: Scientific/Technology All Job Posting Locations: Spring House, Pennsylvania, United States of America Job Description: About Innovative Medicine Our expertise in Innovative Medicine is informed and inspired by patients, whose insights fuel our science-based advancements. Visionaries like you work on teams that save lives by developing the medicines of tomorrow. Join us in developing treatments, finding cures, and pioneering the path from lab to life while championing patients every step of the way. Learn more at *******************/innovative-medicine We are searching for the best talent for the best Principal Automation/Robotics Engineer, Cell Therapy to be in Spring House, PA. Purpose: We are on a mission to transform autologous CAR-T cell-therapy manufacturing with pioneering automation. As a Principal Automation/Robotics Engineer, you will work under minimal supervision and lead portions of programs, projects, and processes. You will provide training and guidance to technical staff and act as a recognized domain expert in automation and robotics. You will establish operational plans and implement products, processes, and standards that have measurable impact on business results. You will apply in-depth knowledge across multiple related fields to address complex problems and expand the application of automated solutions across development, manufacturing, and testing within Johnson & Johnson. You will shape technology strategy, drive enterprise-level innovation, and influence organizational standards while maintaining GMP compliance and operational excellence. You will be responsible for: Design & Deploy Lead concept, design, and deployment of sophisticated automated systems and robotic modules for CAR-T manufacturing and enterprise workflows (including development, testing, and manufacturing) under GMP. Author, define and approve system architectures, user requirements, and design documentation (URS, PFD, FDS, FMEA, DHF, traceability matrices). Initiate and be responsible for prototype development to assess feasibility and performance Own and lead qualification activities (FAT/SAT/PPQ) with strategic oversight for system qualification and validation, ensuring readiness for audits and regulatory inspections. Solve & Improve Act as global system owner for multiple platforms. Apply in-depth knowledge to proactively identify risks and implement mitigation strategies. Resolve highly complex technical issues across mechanical, software, vision, and control systems. Select and direct external vendors and integrators to evaluate, challenge, and implement pioneering technologies or upgrades. Drive continuous improvement initiatives and enterprise-level technology upgrades that advance system reliability, safety, and efficiency. Proactively identify risks and implement mitigation strategies to maintain timelines and production continuity. Maintain & Sustain Be responsible for operational support and compliance activities across multiple sites: monitor equipment performance, maintenance, repairs, and reliability issues. Implement predictive maintenance and advanced analytics tools to sustain performance. Ensure preparation and delivery of comprehensive documentation (SOPs, O&M manuals, reports). Lead compliance activities, audits, and regulatory inspections with minimal direction. Optimize & Scale Lead optimization of multi-step production flows using advanced control systems, dynamic scheduling, and batch orchestration. Shape and lead technology roadmap and run strategic automation programs, ensuring scalability and standardization across global sites. Align automation strategies across QA, IT, OT, facilities, and manufacturing to ensure scalability and standardization. Champion adoption of Industry 4.0 technologies, digital twins, and AI-driven process optimization. Lead technology transfers to other internal sites Leadership & Training Design and provide training and guidance to technical staff and operators. Mentor and lead junior and senior engineers and influence multi-functional teams. Foster a culture of innovation and continuous improvement. Represent automation strategy in enterprise forums and governance bodies. Qualifications: Master's or PhD in Mechanical, Automation, or Robotics Engineering or related technical field required with 6-8 years of overall experience. Minimum of 5 years of practical experience with robotics platforms, automated systems, and control systems, preferably in a regulated manufacturing environment. Proven grounding in engineering and computer science principles for designing automated and robotic components and mechanisms. Excellent verbal and written communication, able to tailor messaging from operators to senior management and external partners. Independent, self-motivated, and comfortable driving ambiguity in fast-paced and sophisticated environments to meet timelines with minimum supervision while maintaining a positive demeanor. Leading complex technical programs, including planning, execution, and stakeholder coordination. Directing external vendors/integrators for installation, upgrades, and troubleshooting. Running outsourced technical projects and selecting and supervising external vendors/integrators, communication, and execution of key deliverables such as URS, FDS, FMEA, SAT, and FAT. Applied experience with computer vision (passive/active) and AI/ML models and agents. Recognized domain expertise in automation and robotics. Proven ability to solve complex system challenges and innovate processes and technologies. Demonstrated ability to author technical documents such as SOPs, technical validation protocols and training materials. Strong leadership skills with ability to mentor and influence multi-functional teams. Advanced knowledge of control systems, robotics, and digital tools. Ability to drive innovation and technology scouting for automation and digital transformation. Demonstrated success in leading risk assessments and mitigation planning for new technology deployments. Work under minimal direction, lead projects, and review work of others. Preferred: Experience in a pharmaceutical or GMP -regulated manufacturing environment. Expertise in ISA S88/S95 systems, including Honeywell EBI, Emerson DeltaV, OSI Pi, Siemens PLCs, MES, SAP, and real-time data integration. Significant coding experience (e.g. Python, C++) and familiarity with Level 0/1 software. Deep understanding of IT/OT convergence, cybersecurity, and advanced analytics. Understanding of Industrial Automation Networks and Communication Protocols. Proven experience as system owner for multiple automated platforms. Knowledge of facility design (utility systems, HVAC, Grade C/D/CNC requirements). Experience implementing Industry 4.0 technologies and AI-driven optimization. Experience with simulation or digital -twin software. Experience with RFID technology. Humor This position will be based in the US (East Coast, Spring House) and requires on-site presence. Willingness to travel up to 30% during project phases and 20% during normal operations. Johnson & Johnson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status or other characteristics protected by federal, state or local law. We actively seek qualified candidates who are protected veterans and individuals with disabilities as defined under VEVRAA and Section 503 of the Rehabilitation Act. Johnson and Johnson is committed to providing an interview process that is inclusive of our applicants' needs. If you are an individual with a disability and would like to request an accommodation, please email the Employee Health Support Center (********************************) or contact AskGS to be directed to your accommodation resource. Required Skills: Preferred Skills: Computer Programming, Cost-Benefit Analysis (CBA), Critical Thinking, Data Science, Industry Analysis, Innovation, Manufacturing Technologies, Organizing, Problem Solving, Process Improvements, Prototyping, Quality Assurance (QA), Quality Control (QC), Research and Development, Robotic Automation, SAP Product Lifecycle Management, Technical Credibility

Catalyx is seeking a Robotics/Vision Engineer with strong experience in liquid handling systems to join our multidisciplinary engineering team. This individual will be responsible for the design, programming, integration, troubleshooting, and documentation of robotic and machine vision systems used in laboratory automation or similar environments. The role also includes providing administrative support to ensure seamless execution of technical projects and compliance with internal standards. Key Responsibilities: · Design and develop robotic systems with a focus on liquid handling applications (e.g., pipetting, dispensing, mixing). · Program and integrate automation platforms and vision systems using industry -standard software tools. · Troubleshoot and resolve issues in robotic hardware, software, and system integration. · Configure and calibrate machine vision systems for object recognition, alignment, and quality control. · Support validation and verification efforts, including writing protocols and reports. · Develop and maintain technical documentation, including system specifications, user manuals, and maintenance procedures. · Collaborate cross -functionally with scientists, engineers, and project managers to meet technical and timeline requirements. · Provide administrative and project support, including tracking project milestones, coordinating vendors, and managing system configurations. Requirements · Bachelor's or Master's degree in Mechanical Engineering, Electrical Engineering, Computer Engineering, Robotics, or a related field. · 3-10 years of hands -on experience in: · Liquid handling systems (e.g., Tecan, Hamilton, Beckman Coulter, or custom platforms) · Robotic automation (industrial arms, lab automation platforms) · Machine vision systems (e.g., Cognex, Keyence, OpenCV, HALCON) · Proficiency in programming languages such as Python, C++, LabVIEW, or proprietary automation scripting languages. · Familiarity with control systems, motion control, and I/O interfacing. · Strong problem -solving skills and ability to work independently or in teams. · Excellent written and verbal communication skills. Why Join Catalyx? At Catalyx we understand that our people are our greatest asset. For this reason and many others, we take care of them. The team in Catalyx benefits from a Total Rewards package. This includes great personal benefits and professional growth opportunities. Catalyx is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace where all individuals are valued, respected, and supported. We do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, veteran status, genetic information, or any other characteristic protected by applicable law. We encourage applications from all qualified candidates, regardless of background, and strive to create a welcoming environment for everyone. At Catalyx, we are committed to attracting the best global talent. We proudly support our international employees by offering assistance with Critical Skills Visa applications for eligible candidates.

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at ******************* Job Function: R&D Product Development Job Sub Function: Robotics Job Category: Scientific/Technology All Job Posting Locations: Spring House, Pennsylvania, United States of America Job Description: About Innovative Medicine Our expertise in Innovative Medicine is informed and inspired by patients, whose insights fuel our science-based advancements. Visionaries like you work on teams that save lives by developing the medicines of tomorrow. Join us in developing treatments, finding cures, and pioneering the path from lab to life while championing patients every step of the way. Learn more at *******************/innovative-medicine We are searching for the best talent for the best Principal Automation/Robotics Engineer, Cell Therapy to be in Spring House, PA. Purpose: We are on a mission to transform autologous CAR-T cell-therapy manufacturing with pioneering automation. As a Principal Automation/Robotics Engineer, you will work under minimal supervision and lead portions of programs, projects, and processes. You will provide training and guidance to technical staff and act as a recognized domain expert in automation and robotics. You will establish operational plans and implement products, processes, and standards that have measurable impact on business results. You will apply in-depth knowledge across multiple related fields to address complex problems and expand the application of automated solutions across development, manufacturing, and testing within Johnson & Johnson. You will shape technology strategy, drive enterprise-level innovation, and influence organizational standards while maintaining GMP compliance and operational excellence. You will be responsible for: Design & Deploy Lead concept, design, and deployment of sophisticated automated systems and robotic modules for CAR-T manufacturing and enterprise workflows (including development, testing, and manufacturing) under GMP. Author, define and approve system architectures, user requirements, and design documentation (URS, PFD, FDS, FMEA, DHF, traceability matrices). Initiate and be responsible for prototype development to assess feasibility and performance Own and lead qualification activities (FAT/SAT/PPQ) with strategic oversight for system qualification and validation, ensuring readiness for audits and regulatory inspections. Solve & Improve Act as global system owner for multiple platforms. Apply in-depth knowledge to proactively identify risks and implement mitigation strategies. Resolve highly complex technical issues across mechanical, software, vision, and control systems. Select and direct external vendors and integrators to evaluate, challenge, and implement pioneering technologies or upgrades. Drive continuous improvement initiatives and enterprise-level technology upgrades that advance system reliability, safety, and efficiency. Proactively identify risks and implement mitigation strategies to maintain timelines and production continuity. Maintain & Sustain Be responsible for operational support and compliance activities across multiple sites: monitor equipment performance, maintenance, repairs, and reliability issues. Implement predictive maintenance and advanced analytics tools to sustain performance. Ensure preparation and delivery of comprehensive documentation (SOPs, O&M manuals, reports). Lead compliance activities, audits, and regulatory inspections with minimal direction. Optimize & Scale Lead optimization of multi-step production flows using advanced control systems, dynamic scheduling, and batch orchestration. Shape and lead technology roadmap and run strategic automation programs, ensuring scalability and standardization across global sites. Align automation strategies across QA, IT, OT, facilities, and manufacturing to ensure scalability and standardization. Champion adoption of Industry 4.0 technologies, digital twins, and AI-driven process optimization. Lead technology transfers to other internal sites Leadership & Training Design and provide training and guidance to technical staff and operators. Mentor and lead junior and senior engineers and influence multi-functional teams. Foster a culture of innovation and continuous improvement. Represent automation strategy in enterprise forums and governance bodies. Qualifications: Master's or PhD in Mechanical, Automation, or Robotics Engineering or related technical field required with 6-8 years of overall experience. Minimum of 5 years of practical experience with robotics platforms, automated systems, and control systems, preferably in a regulated manufacturing environment. Proven grounding in engineering and computer science principles for designing automated and robotic components and mechanisms. Excellent verbal and written communication, able to tailor messaging from operators to senior management and external partners. Independent, self-motivated, and comfortable driving ambiguity in fast-paced and sophisticated environments to meet timelines with minimum supervision while maintaining a positive demeanor. Leading complex technical programs, including planning, execution, and stakeholder coordination. Directing external vendors/integrators for installation, upgrades, and troubleshooting. Running outsourced technical projects and selecting and supervising external vendors/integrators, communication, and execution of key deliverables such as URS, FDS, FMEA, SAT, and FAT. Applied experience with computer vision (passive/active) and AI/ML models and agents. Recognized domain expertise in automation and robotics. Proven ability to solve complex system challenges and innovate processes and technologies. Demonstrated ability to author technical documents such as SOPs, technical validation protocols and training materials. Strong leadership skills with ability to mentor and influence multi-functional teams. Advanced knowledge of control systems, robotics, and digital tools. Ability to drive innovation and technology scouting for automation and digital transformation. Demonstrated success in leading risk assessments and mitigation planning for new technology deployments. Work under minimal direction, lead projects, and review work of others. Preferred: Experience in a pharmaceutical or GMP -regulated manufacturing environment. Expertise in ISA S88/S95 systems, including Honeywell EBI, Emerson DeltaV, OSI Pi, Siemens PLCs, MES, SAP, and real-time data integration. Significant coding experience (e.g. Python, C++) and familiarity with Level 0/1 software. Deep understanding of IT/OT convergence, cybersecurity, and advanced analytics. Understanding of Industrial Automation Networks and Communication Protocols. Proven experience as system owner for multiple automated platforms. Knowledge of facility design (utility systems, HVAC, Grade C/D/CNC requirements). Experience implementing Industry 4.0 technologies and AI-driven optimization. Experience with simulation or digital -twin software. Experience with RFID technology. Humor This position will be based in the US (East Coast, Spring House) and requires on-site presence. Willingness to travel up to 30% during project phases and 20% during normal operations. Johnson & Johnson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status or other characteristics protected by federal, state or local law. We actively seek qualified candidates who are protected veterans and individuals with disabilities as defined under VEVRAA and Section 503 of the Rehabilitation Act. Johnson and Johnson is committed to providing an interview process that is inclusive of our applicants' needs. If you are an individual with a disability and would like to request an accommodation, please email the Employee Health Support Center (********************************) or contact AskGS to be directed to your accommodation resource. Required Skills: Preferred Skills: Computer Programming, Cost-Benefit Analysis (CBA), Critical Thinking, Data Science, Industry Analysis, Innovation, Manufacturing Technologies, Organizing, Problem Solving, Process Improvements, Prototyping, Quality Assurance (QA), Quality Control (QC), Research and Development, Robotic Automation, SAP Product Lifecycle Management, Technical Credibility

Job Description Industrial, Electrical Controls Technician We are seeking a highly skilled and motivated Industrial Electrical Controls Technician to join our dynamic team. In this role, you will be responsible for installing, maintaining, and troubleshooting electrical control systems in an industrial setting. The ideal candidate should have a strong background in electrical systems, controls, and automation, coupled with the ability to work independently and collaboratively within a team environment. Responsibilities: Installation and Maintenance: Install, repair, and maintain electrical control systems, including control panels, PLCs, instrumentation, and associated equipment. Troubleshooting: Diagnose and troubleshoot electrical and control system issues, identifying root causes and implementing effective solutions to minimize downtime. Programming and Configuration: Program and configure Programmable Logic Controllers (PLCs) and Human-Machine Interface (HMI) systems to optimize industrial processes. (Not required) Safety Compliance: Ensure all work is performed in compliance with relevant safety standards, codes, and regulations, promoting a safe working environment. Collaboration: Collaborate with cross-functional teams, including engineers, maintenance personnel, and production staff, to integrate and optimize electrical control systems. Documentation: Maintain accurate records of equipment configurations, wiring diagrams, and maintenance procedures. Preventive Maintenance: Implement preventive maintenance programs for electrical and control systems to maximize equipment reliability and longevity. Training: Provide training and support to production personnel on the proper use and maintenance of electrical control systems. Qualifications: Education: Associate's degree in Electrical Engineering, Industrial Automation, or a related field. Bachelor's degree is a plus. Or equivalency years of experience. Experience: Experience in industrial electrical control systems, panels, automation. digital multipliers, and with the ability to read schematics. Proficiency in reading, analyzing, and interpreting safety rules, operating and maintenance instructions, and procedure manuals. Comprehension of electrical circuitry and schematic diagrams. Technical Skills: Proficient in PLC programming, HMI configuration, motor control systems, and electrical troubleshooting is desirable, not required. AutoCAD experience preferred, not required Certifications: Relevant certifications in electrical and control systems are adventageous. Communication: Strong communication and interpersonal skills with the ability to collaborate effectively with team members. Safety Conscious: Prioritize safety in all aspects of work and adhere to safety guidelines and procedures. Safely and effectively lift, carry, and move objects of varying weights. Bending, stooping, kneeling, reaching, climbing, balancing, standing, and walking, for extended periods and maintain the necessary physical dexterity and coordination. Work in various environmental conditions, which may include exposure to varying temperatures, weather, and noise levels. If you are a detail-oriented and experienced Electrical Controls Technician looking to contribute your skills to a dynamic industrial environment, we invite you to apply. Join our team and play a key role in ensuring the efficient and reliable operation of our electrical control systems. Looking forward to getting to know you… We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Full-time Description The Electrical/Controls Technician is responsible for maintenance, proper operation, and troubleshooting of all mechanical and electrical systems on production and support equipment. Essential Duties and Responsibilities: Support and manage all control components within a PLC system. Perform maintenance activities within a manufacturing environment on production and support equipment. Incorporates LOTO procedures as required by policy. Dismantles devices to gain access to impacted areas and repair/remove defective parts. Determines, by use of regular inspections, the repair and maintenance work necessary to prevent breakdowns. Inspects used parts to determine changes in dimensional requirements if the parts are reusable, and what parts, if any need to be ordered. Adjusts functional parts of devices and control instruments not performed by machine operators to ensure proper operation. Repairs electrical equipment within the limitations of expertise and training. Sets up and operates lathe, drill press, grinder, and other tools to make and repair parts. Removes tools and cleans impacted work areas upon completion of work. Initiates purchase orders for parts and machines. Makes recommendations concerning equipment and/or procedure modifications. Locates and sets production machinery as required by production schedule. Performs and assures all duties are carried out in a safe and conscientious manner. Maintains a positive attitude when interacting with Asher's team members and customers. Performs other job-related duties in area of responsibility as assigned. Requirements Work Environment/ Physical Demands: Employee must be willing to be frequently exposed to moving mechanical parts, wet or humid weather conditions, high precarious places, fumes or airborne particulates, toxic or caustic chemicals, outside weather conditions, high frequency vibrations, and noise levels requiring hearing conservation protection. Frequently required to stand, walk, and reach with hands and arms for an 8-hour shift. Employees must frequently lift and/ or move up to 35 pounds without the aid of material handling equipment. Accountabilities: Responsible Maintenance Manager A. Report problems that cannot be resolved immediately Qualifications: Ability to read, write, and communicate in English Must have experience in a high-speed manufacturing environment Supervisory Responsibilities: None Education: Must have a High School Diploma or GED equivalent Experience: Needs to have acquired 1-3 years related experience and/ or training. Equivalent combination of education and experience preferred Must have working knowledge of PLC Systems and associated software & ability to trouble-shoot controls and low voltage systems Knowledge and Skills: Basic knowledge of the following: three phase electrical systems, welding and machine shop practices, HVAC systems, plumbing and pneumatics, conveyors and conveying systems, and ability to read and complete preventative maintenances as assigned Mechanical and standard electrical skills Travel Requirements: None This is intended to convey essential information to understand the scope of the job, the general nature, and level of work performed by job holders. This job description isn't an exhaustive list of qualifications, skills, efforts, duties, responsibilities, or working conditions, which may be changed from time to time based upon business needs.