Controls engineer jobs in Puerto Rico - 54 jobs

Market Water At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good. Your impact Come be a part of our team to support our client's infrastructure projects in Puerto Rico have a hand in transforming tomorrow! As an Instrumentation and Controls Engineer (I&C) Water/Wastewater, you will play an important part of our electrical and process engineering team as you complete a variety of technical tasks in the design and operation of SCADA and Automation systems for water/wastewater treatment facilities, supporting our clients in both our local offices and client sites. Typical duties will include * Evaluate and develop alternative control system solutions that meet client requirements. * Develop design reports, specifications, plans, and associated client deliverables for the I&C, telemetry, and SCADA systems. * Specify instruments, controllers, computers, servers, ancillary equipment and components, and application software. * Assist in defining interface requirements for process valves, adjustable frequency drives, and packaged systems. * Develop new and modify existing application programming in PLCs (programmable logic controllers), HMIs (human machine interfaces), and associated components. * Participate in consulting, design, construction, planning, commissioning/start-up, training, and close-out phase activities. * Create documentation for application software. * Work with and coordinate SCADA system requirements with other disciplines, including civil, structural, architectural, process mechanical, HVAC, plumbing, and electrical during the design phase. * Interact with clients to gain an understanding of their systems. * Work with contractors and sub-contractors to resolve issues during construction and commissioning/start-up. * Collaborate and develop solutions with multi-disciplinary senior-level leaders. * Attend meetings (on-site/off-site or video conferencing) and provide official project status reports per the frequency required (daily, weekly, bi-weekly, etc.). * Provide project management support in any form, demonstrating compliance with all directives and other applicable standards to include records management. If you are up to the challenge, we've been looking for someone just like you to join our team to help us transform tomorrow. Here's what you'll need * Bachelor's degree in Electrical Engineering from an accredited college/university. * Demonstrated professional experience in the Instrumentation and Controls (I&C) field. * Field experience inspecting newly installed control systems for conformity with contract documents. #LI-DL1 Posted Salary Range: Minimum 58,000.00 Posted Salary Range: Upper 110,000.00 Our health and welfare benefits are designed to invest in you and in the things you care about. Your health. Your well-being. Your security. Your future. Eligible employees and their dependents may elect medical, dental, vision, and basic life insurance. Employees are able to enroll in our company's 401(k) plan, and, if eligible, a deferred compensation plan and Executive Deferral Plan. Employees will also receive 17 days of vacation per year, seven paid holidays, plus floating holidays and caregiver leave. Hired applicants will be able to purchase company stock and have the opportunity to receive a performance discretionary bonus. The base salary range for this position is $58,000.00 to $110,000.00. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Job posted on December 22, 2025. This position will be open for at least 3 days. We value collaboration and believe that in-person interactions are crucial for both our culture and client delivery. We empower employees with our hybrid working policy, allowing them to split their work week between Jacobs offices/projects and remote locations enabling them to deliver their best work. Your application experience is important to us, and we're keen to adapt to make every interaction even better. If you require further support or reasonable adjustments with regards to the recruitment process (for example, you require the application form in a different format), please contact the team via Careers Support. Locations CityStateCountryGuaynaboPuerto RicoUnited States

We offer you the opportunity to utilize and expand your academic background in engineering: + You will work on a multi-discipline engineering team involved in nuclear power plant instrumentations and controls betterment projects. These projects are a synergistic integration of both electrical and mechanical engineering along with control theory. + You will work with electronic process sensors, digital controllers, touchscreen displays, pumps, valves, heat exchangers, steam turbines and reactors to improve the functionality of nuclear power plants. + You will prepare specifications for the procurement of instrumentation and controls equipment as well as engineering calculations associated with plant upgrades and modifications. + Through mentoring, classroom-style technical sessions, and on-the-job training, you will increase your knowledge and skills in your engineering discipline. + You will also have the opportunity to travel to client and vendor offices for design reviews and to plant site locations for project coordination and field verification of designs. This position is based on a hybrid work schedule and will require in-office work 3 days per week. Qualifications We do not sponsor employees for work authorization in the U.S. for this position. + A Bachelor's and/or Master's degree in Electrical, Mechanical, or Chemical Engineering (from an ABET accredited program) with a strong academic background and coursework in analog and digital control systems is required + A minimum of 3 years of experience in design engineering for power plant control systems + Coursework in mechatronics is desired, but not required + Excellent written and verbal communication skills + Must be bilingual in Spanish and English (Speak, Read, and Write) Award-Winning Benefits At Sargent & Lundy, we care about the health and well-being of our employees. Our commitment extends beyond the workplace, offering comprehensive healthcare plans and generous paid time off to support our team members in every aspect of their lives. We understand the importance of work-life balance, which is why we are proud to provide competitive, award-winning benefits. Our dedication to employee satisfaction has earned us the prestigious Top Workplaces Culture Excellence Award for compensation and benefits in 2022, 2023, and 2024. Health & Wellness Financial Benefits Work-Life Balance + Health Plans: Medical, Dental, Vision + Life & Accident Insurance + Disability Coverage + Employee Assistance Program (EAP) + Back-Up Daycare + FSA & HSA + 401(k) + Pre-Tax Commuter Account + Merit Scholarship Program + Employee Discount Program + Corporate Charitable Giving Program + Tuition Assistance + First Professional Licensure Bonus + Employee Referral Bonus + Paid Annual Personal/Sick Time (PST) + Paid Vacation + Paid Holidays + Paid Parental Leave + Paid Bereavement Leave + Flexible Work Arrangements About This Business Unit Join Sargent & Lundy's Nuclear Power Group and be part of a team driving the future of clean, carbon-free energy. Since 1954, we've been a trusted leader in nuclear engineering, design, and licensing, with expertise spanning small modular reactors (SMRs), advanced reactor technology (ART), and first-of-a-kind commercial reactor restart projects. Our work supports life extensions and digital modernization of existing nuclear plants, coal-to-nuclear conversion initiatives with the Department of State, and international nuclear new-build projects. With a commitment to safety, innovation, and sustainability, we provide cutting-edge solutions that power communities worldwide while reducing emissions. Shape the future of global energy with us! Awards & Recognition Equal Opportunity Sargent & Lundy is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any protected status as defined by applicable law. CitySan Juan CountryPuerto Rico Area of InterestElectrical Engineering TypeFull Time - Regular Job ID2025-19922 Business GroupNuclear Power Group DepartmentInstrumentation and Controls Engineering

Your Opportunity Our Puerto Rico office is seeking a Senior Transmission Line Engineer. This position is ideal for an excellent communicator and skilled problem solver, with a commitment to thrive in a proactive organization where client service and individual excellence are paramount. We offer you the opportunity to challenge your abilities in a dynamic and diversified team environment. Your Key Responsibilities · The successful candidate will use his/her technical abilities to plan, analyze, and design a variety of transmission line projects primarily with the utilities and other type of projects with multiple stakeholders. · In addition, he/she will report directly to a Senior Project Engineer or Project Manager and will have primarily transmission line project planning, analysis, and design responsibilities. · Solid understanding of transmission line project scope & deliverables. Having the ability to identify scope creep and provide immediate input and coordinate with Senior Project Engineer or Project Manager to remedy the situation. · Coordinating with engineers and technical staff to ensure that the projects needs are met in a timely and effective manner. · Coordinating with equipment vendors, clients, and the rest of the design disciplines. · Lead meeting with clients, other stakeholders, and contractors to review project needs and coordinate field conditions. · Following the process for obtaining approvals from various agencies. · Researching issues related to transmission line projects that impact individual projects. · Writing and editing technical reports and engineering studies. · Preparing plans, specifications, and design packages for transmission line projects. · Producing technical presentations and design drawings. · Perform detailed studies, review plans, transmission line modeling and design tasks associated with utilities or other type of projects, under the supervision of a project manager. · Support construction projects with field site visits and construction observation duties, responding to RFIs. · Act as a liaison between Customer engineering and construction teams. · Certify that Customer Design Practices are followed as they relate to their Practice/Discipline deliverables, and they act as a focal point for the Customer Project Practice/Discipline Team Members. · Schedule and coordinate peer reviews of said tasks including, third-party Practice/Discipline quality reviews of deliverables. · Support project manager and group manager to prepare proposal man-hour estimates and technical scopes to support the sales effort. Qualifications - External Your Capabilities and Credentials · Be a self-motivated individual, possessing strong interpersonal and communication skills, both written and verbal, along with the ability to prioritize multiple tasks. · Candidate must have strong technical writing abilities. Good command in English is required. · Ability to work effectively in a team environment, to manage others, their workload, and client expectations. · Complete skillsets in modeling transmission lines in PLS-CADD, preparing route alignments, preparing plan and profiles, performing structural analysis, detailed knowledge of hardware assemblies and conductors, structure detail drawings and BOMs. Tower design skillsets is a plus. · Experienced with the use of software in accordance with expertise, which may include PLS-CADD, PLS-POLE, PLS-TOWER as well as LPile, FAD Tools, specialized structural software (ANSYS, LS DYNA and SAP2000). · Familiarity and sufficient knowledge in related electrical studies, such as EMF, fault current, grounding, contaminants study and clearance analysis for transmission line design. · Project/design management and team leadership experience. · Ability to manage and complete deliverables as per project schedule and within budget for various size of project, from small & medium sized projects to larger & complex projects. · Ability to work closely with stakeholders to meet with project timelines for engineering deliverables · Ability to understand and apply client specific requirements (standards & specifications) and applicable codes & regulations · Requires broad general knowledge of electrical industrial and utility power projects, including strong familiarity with other disciplines required for completion of such projects, including Civil Engineering, Structural Engineering, Electrical Engineering, Environmental Services, Surveying, and permitting. · Open mindedness to learn new aspects of transmission line design or new emerging technology. Education and Experience Bachelor's degree or equivalent in Civil, Structural, Mechanical or Electrical Engineering from an accredited institution. Minimum of 8 years of experience in transmission line design and construction experience. (69kV to 765kV). Utility experience and/or experience in underground transmission line are/is a plus. Puerto Rico P.E. License preferred Must have a valid drivers license with a good driving record

The Senior Distribution Engineer will lead design project teams to create world-class designs for new projects, alterations, and redevelopments on various 2.4kV to 34.5kV overhead and underground utility distribution projects. The Senior Distribution Engineer will lead the project team throughout the design and construction process, adapting electrical distribution plans according to budget constraints, design factors, or client needs. + Lead design of distribution voltage packages for both overhead and underground projects, including distribution equipment installation, feeder replacement, cable replacement, and new feeder design. + Review various distribution calculations, including cable pulling, voltage drop, and pole loading calculations. + Apply strong knowledge of NESC standards and utility standards, guides, specifications, and procedures. + Participate in the development of project schedule, scope, budget, resource forecasting, and construction planning. Responsible for effective management of change orders. + Apply knowledge and experience to complex projects to find non-standard design solutions. + Oversee or perform Quality Control reviews of project deliverables. + Oversee or perform construction administration activities. + Lead field inspections for overhead and underground electric facilities on public and private electric utility systems. + Prepare and present technical reports for clients and industry publications. + Build effective relationships with existing clients, customers, and contractors and develop new business opportunities. Responsible for ensuring customer satisfaction goals and expectations are met. + Participate in sales and marketing efforts and identify key pursuits. + Lead the development of cost proposals and qualification statements to achieve stated targets and standards for financial performance. + Provide leadership, guidance, and instruction by mentoring less experienced engineers and designers. + Responsible for QA/QC process adherence. + Responsible for effective communication regarding vegetation management, third-party attachments, right-of-way, and outage planning. + Responsible for compliance with company and site safety policies. + All other duties as assigned. **Qualifications** + Bachelor of Science in Engineering or related degree from an ABET accredited program. + A Bachelor of Science in Engineering or related Engineering Technology degree from an ABET accredited program and successful completion of the Fundamentals of Engineering (FE) exam. + Master of Science degree in Engineering a plus. + Seven years of distribution engineering experience. EPC project experience preferred. + Professional Engineering License (PE) preferred. + Expert knowledge of electrical distribution power flow. + Strong knowledge of overhead and underground construction methods and distribution system equipment. + Strong computer skills (e.g., Microsoft Office Suite). + Experience in distribution design software and GIS to aid in design. + Expert knowledge regarding easements, right-of-way, and permitting for distribution projects. + Excellent written and verbal communication skills. + Experience with leading the design for large projects and delegating work tasks to team members. Ability to lead the execution of work and resolve issues in a team environment. + Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment. + Strong attention to detail, facilitation, team building, collaboration, organization, and problem-solving skills. + Ability to perform quality reviews for detailed engineering documents and specifications. + Ability to travel. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Electrical Engineering **Primary Location** US-PR-San Juan **Schedule:** Full-time **Travel:** Yes, 15 % of the Time **Req ID:** 253298 **Job Hire Type** Experienced #LI-MG #T&D N/A

**The 'Apply with SEEK option' will be utilized for International applicants, mainly Australia. If this does not apply to you please use the 'Apply' option.** IF YOU CARE, THERE'S A PLACE FOR YOU HERE EFI Global is a full-service engineering, fire investigation, environmental, health and safety, and specialty consulting services firm serving a variety of industries in both the public and private sectors. Over the last four decades, we have grown from a boutique firm specializing in handling insurance fraud and arson cases and providing expert witness testimony, into a recognized global leader in engineering failure analysis, origin-and-cause investigations, environmental consulting, laboratory testing and specialty consulting. Our forensic investigation, engineering and environmental services teams around the world share a dedication to expertise, quality and demonstrating to customers that caring counts . Each of our more than 700 professional engineers, fire investigators, architects and scientists was selected for their technical proficiency, in-depth industry knowledge and commitment to professional integrity. Together, our diverse backgrounds and collective insights empower clients to make better-informed business decisions. EFI's combination of global solutions and local expertise has earned the firm a reputation for delivering timely responses that consistently meet our clients' expectations-anytime, anywhere. Click here to learn more about EFI Global. **PRIMARY PURPOSE** **:** To be responsible for the profitably of investigating events, systems, devices, and/or failures and providing expert opinions. **With a robust background in electrical engineering and a keen expertise in forensic analysis, this professional will bring a wealth of experience investigating electrical failures, diagnosing complex troubleshooting scenarios, and assessing incidents related to power distribution and generation. Adept at analyzing intricate circuitry, evaluating arc flash events, and understanding the nuances of lightning strikes and electrical fires, they are skilled in identifying root causes and devising comprehensive solutions. Their comprehensive knowledge of electrical components and systems, paired with a meticulous approach to both preventative and reactive engineering, ensures reliable performance and insightful evaluations across a wide spectrum of electrical challenges. Candidate must hold P.E. license in resident state.** **PRIMARY PURPOSE** **:** **To be responsible for profitably, ethically and scientifically investigating events, systems, devices and/or failures and providing expert opinions; to provide guidance and leadership on complex engineering assignments.** **Are You An Ideal Candidate? We are looking for enthusiastic candidates who thrive in a collaborative environment, who are driven to deliver results, are customer oriented and naturally empathetic.** **Apply your engineering knowledge and experience to investigate and assess complex failures in the context of an energetic, people focused, entrepreneurial culture.** **Deliver comprehensive engineering analyses to clients who represent virtually every industry and comprise some of the world's most respected organizations.** **Leverage EFI Global's broad, global network of experts to both learn from and to share your insights.** **Be a part of a rapidly growing, industry-leading global company known for its excellence and customer service.** **Take advantage of a variety of professional development opportunities that help you perform your best work and grow your career.** **Enjoy flexibility and autonomy in your daily work, your location, and your career path.** **Access diverse and comprehensive benefits to take care of your mental, physical, financial, and professional needs.** **ESSENTIAL FUNCTIONS and RESPONSIBILITIES** **Provides guidance and leadership to newer colleagues and/or those with less experience on complex engineering assignments.** **Surveys property, casualty and liability losses, typically at residential and commercial buildings and loss scenes.** **Conducts investigations to determine the root cause of events and failures.** **Works closely with engineers and investigators to produce detailed reports, drawings, and/or outline the cause and origin of losses and damages. ** **Develops plans, reports and drawings to meet client's needs and/or determine and document the failure analysis and causation of failures.** **Provides expert testimony in a court of law and/or in depositions.** **Determines applicable engineering practices to fulfill the prescribed scope of work, project specifics, timelines, and cost estimates for the professional services provided.** **Documents and maintains billable hours on a time and expense basis for failure analysis and engineering projects for clients.** **Collaborates with sales and operations managers, architects, developers, insurance adjusters, claims managers and attorneys to develop demand for your professional services.** **Collaborates with EFI's national team of forensic experts to leverage experiences and assist on projects.** **ADDITIONAL FUNCTIONS and RESPONSIBILITIES** **Performs other duties as assigned.** **Supports the organization's quality program(s).** **QUALIFICATIONS** **Education & Licensing** **Bachelor's degree from an accredited college or university required.** **Professional Engineering (PE) license is required.** **Experience** **Eight (8) years of experience or equivalent combination of experience and education required including two (2) years of engineering experience specifically in failure analysis and forensic engineering plus 2 years in insurance and/or risk management services industry.** **Skills & Knowledge** **Excellent oral and written communication** **PC literate, including Microsoft Office products** **Analytical and interpretive skills** **Strong organizational skills** **Excellent interpersonal skills** **Ability to work independently or in a team environment** **Ability to meet or exceed Performance Competencies** **WORK ENVIRONMENT** **When applicable and appropriate, consideration will be given to reasonable accommodations.** **Mental** **: Clear and conceptual thinking ability; excellent judgment and discretion; ability to handle work-related stress; ability to handle multiple priorities simultaneously; and ability to meet deadlines** **Physical** **:** **Must be able to stand and/or walk for long periods of time.** **Must be able to kneel, squat or bend.** **Must be able to work outdoors in hot and/or cold weather conditions.** **Have the ability to climb, crawl, stoop, kneel, reaching/working overhead,** **Be able lift/carry up to 50 pounds** **Be able to push/pull up to 100 pounds.** **Be able to drive up to 4 hours per day.** **Auditory/Visual** **: Hearing, vision and talking** **NEXT STEPS** **If your application is selected to advance to the next round, you will receive an e-mail notification or phone call from a recruiter to schedule an initial call.** Always accepting applications. _As required by law, Sedgwick provides a reasonable range of compensation for roles that may be hired in jurisdictions requiring pay transparency in job postings. Actual compensation is influenced by a wide range of factors including but not limited to skill set, level of experience, and cost of specific location. For the jurisdiction noted in this job posting only, the range of starting pay for this role is $115,000-$165,000_ _. A comprehensive benefits package is offered including but not limited to, medical, dental, vision, 401k and matching, PTO, disability and life insurance, employee assistance, flexible spending or health savings account, and other additional voluntary benefits. Always accepting applications._ Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, the San Diego Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, the California Fair Chance Act, and all other applicable laws. The statements contained in this document are intended to describe the general nature and level of work being performed by a colleague assigned to this description. They are not intended to constitute a comprehensive list of functions, duties, or local variances. Management retains the discretion to add or to change the duties of the position at any time. Sedgwick is an Equal Opportunity Employer and a Drug-Free Workplace Our business is founded on people with the best technical skills and outstanding industry knowledge and we strive to employ and retain exceptional talent. EFI Global is an equal opportunity employer welcoming applications from all qualified persons. If you are interested in working for us, please visit our job board.

About Us Groundbreaker. Game changer. Pioneer. TRC has long set the bar for clients who require more than just engineering, combining science with the latest technology to devise innovative solutions that stand the test of time. From pipelines to power plants, roadways to reservoirs, schoolyards to security solutions, clients look to TRC for breakthrough thinking backed by the innovative follow-through of an industry leader. TRC's professionals work with a broad range of commercial, industrial and government clients and the communities they serve. We deliver breakthrough solutions that address local needs -- so our clients can better succeed in an ever-changing world. Working at TRC means tackling interesting, meaningful projects. We pride ourselves on our collaborative spirit, entrepreneurial zeal and agile corporate structure. We recognize that the expertise of our staff is our strongest asset, so we generously reward employees for successful performance and invest in their careers through training and the development of new skills and certifications. Overview TRC is hiring an Electric Distribution Engineer. We are open to candidates residing in surrounding areas. This position will be working within our Power Distribution Engineering team and a part of our growing Power Sector. This position is responsible for performing complex detailed design of overhead and /or underground electric distribution systems. This work includes the preparation of field notes, drawings, specifications, and estimates. To perform detailed design work including the preparation of drawings, specifications, and estimates for review and approval by the responsible engineer. Shall provide quality review to Designers and Technicians on assigned projects and may be required to act as design leader on projects of minor complexity. Responsibilities Shall perform with a minimum of supervision, a variety of design related duties including, but not limited to, the following: * Prepare manual or computer assisted design and construction drawings of a complex nature with neatness and a minimum of errors. * Perform design services requiring a full understanding of drawings, specifications, and industry and Company standards covering the assigned work. * Take a significant role in the preparation of cost estimates, specifications, evaluations, and requisitions. * Assist in the preparation of engineering calculations. * Coordinate equipment deliveries and design development to meet project schedules. * Acquire on-site field data to accomplish the design or to monitor and evaluate equipment performance. * May serve as a Project Coordinator on certain projects. * Perform other duties as assigned. * Overnight travel to surrounding utility territory is expected Qualifications * Bachelor's Degree in Electrical Engineering /Technology from an accredited college or university. Management may consider other education and work experience to be acceptable for appointment to this position. * Demonstrated ability and/or experience with GIS systems and AutoCAD * Experience working in field and office preferred * Zero - 1+ years of utility distribution design experience with a utility or consulting engineering firm with demonstrated project capability. New Graduates considered * Ability to handle contacts with clients and other agencies in connection with project design responsibilities. * Ability to follow prescribed standards and procedures. * Demonstrated leadership and technical capability to perform to job responsibilities. Benefits*: TRC offers a competitive benefit package consisting of: * Medical, dental, vision, and disability insurance. * 401k package that includes both traditional and Roth IRA options and Company match. * Paid time off contingent upon full time or part time status and level of seniority (ranging from 15 to 25 days per year). * All full-time employees enjoy a minimum of 8 Paid Holidays per year. * TRC ensures that all employees, including those that work part-time, receive paid sick, family, and disability leave in accordance with the laws of their state of residence. * These benefits are applicable to US employees depending on their employment status (full time, part time, or temporary). TRC offers jurisdiction specific benefit packages for International and Puerto Rico employees. Compensation: In accordance with local law, the below salary range is applicable for the job and location associated with this requisition. Compensation will vary based upon experience, education, skill level, geographical location, and other compensable factors. Other Compensation: Employee may be eligible for participation in the Company's annual Discretionary Bonus Program which is contingent on Company, Business Segment, and Individual performance against Key Performance Indicators which vary by year and employee. Disclaimers TRC is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by applicable law. All employment decisions are made based on qualifications, merit, and business needs. We celebrate diversity and are committed to creating an inclusive environment for all employees. The complete job description and application are available on TRC's career site. TRC accepts applications for this position on an ongoing, rolling basis and reserves the right to cancel this posting at any time.

Job Description Validation & Engineering Group, Inc. (V&EG) is a leading services supplier who provides solutions for the Pharmaceutical, Biotechnology, Chemical, Food, and Medical Devices industries in the following areas: Laboratory, Compliance, Computer, Engineering, Project Management, Validation, and other services. We are seeking a talented, dedicated individual committed to work under the highest ethics standards for the following position: Process Development Engineer Develops and reviews documentation and procedures and provides automation systems testing and validation in support of Process Development and/or Manufacturing Process Engineering. Key Responsibilities: Process Validation Support process and/or equipment validation activities (IQ, OQ, PQ); process performance qualification activities and develop Master validation plans for new processes or products. Responsible for reviewing and developing process validation protocols and reports. Support other functional areas during the validation activities. Work with the Process Development team to efficiently qualify new processes; assist on statistical sampling plans, and other development procedures. Design and develop in-process and receiving quality systems for new processes and components Generate equipment documentation, such as equipment entries, evaluations, PM and calibration procedures, as required. Define gages, tools and equipment for the test methods developed. Generate manufacturing instructions for new processes being developed Work cross-functionally with other departments to accomplish PD task. Process Development Be able to manage process development projects from conception to implementation, ensuring project deadlines and objectives are met. Familiarity with a variety of technologies and equipment used in the industry to carry out manufacturing processes, such as Laser Welding, Stringing, Staking, Heat Bonding, Injection Molding, Vision Systems, general experience with automated equipment (PLC/Servos/Pneumatics/ Sensors), etc. Experience with design of experiments (DOE) to characterize and optimize processes, as well as analyze the resulting data to draw meaningful conclusions. Ability to identify areas of improvement in processes and develop strategies to optimize the efficiency, quality and/or yield of those processes that are being developed. Understand and evaluate the risks associated with these manufacturing processes and develop ideas/solutions to minimize these risks. Also work with PFMEA methodology for risk analysis documentation. Ability to collaborate with other engineers, scientists, and production personnel to achieve manufacturing process development objectives and solve problems effectively. Be able to effectively communicate technical concepts to a variety of audiences, both technical and non-technical, through reports, presentations, and other media. Qualifications: Bachelor's Degree in Science or Engineering. Minimum of 3-5 years of experience in direct pharmaceutical, medical device or biotechnology industries. Experience in direct process / manufacturing areas. Must be fully bilingual (English / Spanish) with excellent oral skills. Must be proficient using MS Windows and Microsoft Office applications. Strong knowledge in cGxP and regulatory guidance as well as understanding of how they are applied to regulatory compliance. Experience in Design Documentation (URS, DS), IQ, OQ, PQ protocols development and execution, deviations and reports generation. SDLC, Risk Assessment, Data Integrity, Factory Acceptance Test (FAT) & Site Acceptance Test (SAT). Strong knowledge (according to related area). Technical Writing skills and investigations processes. Available to work extended hours, possibility of weekends and holidays.

Responsable de resolver problemas de ingenierà a tales como el control de procesos industriales y de sistemas electrónicos de potencia, instrumentación y control; asà como la transformación de electricidad para el funcionamiento de diversos aparatos electrónicos. Requirements 1 a 5 años de experiencia en el área. "}}],"is Mobile":false,"iframe":"true","job Type":"Contrato","apply Name":"Apply Now","zsoid":"664728484","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Industrial"},{"field Label":"Work Experience","uitype":2,"value":"1\-3 años"},{"field Label":"City","uitype":1,"value":"Isla"},{"field Label":"State\/Province","uitype":1,"value":"Puerto Rico"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"00936"}],"header Name":"Electronic Engineer","widget Id":"451563000000072311","is JobBoard":"false","user Id":"451563000000195003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":false,"job Id":"451563000002054124","FontSize":"12","google IndexUrl":"https:\/\/psdincpr.zohorecruit.com\/recruit\/ViewJob.na?digest=.AaMNETH9vCrdycgPVjmjryayQwUXSWGqeHEdk47Wsg\-&embedsource=Google","location":"Isla","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do"}

At INVID, we're seeking a highly skilled and motivated AWS Application Engineer to drive the automation, scalability, and reliability of our cloud infrastructure. What sets INVID apart is our collaborative and flexible work environment. We encourage our team to raise the bar in everything they do while maintaining a healthy work-life balance. With our hybrid work model, team members thrive both in the office and remotely. We foster a culture of mutual respect, autonomy, and accountability, where your voice matters and your growth is supported. From structured career paths and paid professional development to access to industry events, we're committed to your success. Responsabilities: Analyze application architecture and dependencies to determine migration readiness. Work with architects to design migration strategies (Rehost, Replatform, Refactor) for various workloads. · Assist in the migration of applications to AWS using tools like AWS Application Migration Service (MGN), AWS Database Migration Service (DMS), and AWS Elastic Beanstalk. Ensure proper deployment, configuration, and performance of applications in AWS environments. Troubleshoot application issues and ensure smooth functioning in the new AWS environment. Optimize applications for performance, scalability, and cost efficiency. Configure applications to utilize AWS services like RDS, S3, Lambda, DynamoDB, and CloudFront. Set up monitoring and logging for applications using AWS CloudWatch, X-Ray, and third-party tools. Collaborate with DevOps engineers to automate application deployments using AWS CodePipeline, CodeDeploy, or Jenkins. Develop scripts for repeatable application setup and provisioning using Infrastructure as Code (IaC) tools like AWS CloudFormation or Terraform. Work closely with architects, QA engineers, and stakeholders to ensure migration objectives are met. Actively participate in Scrum ceremonies, including sprint planning, daily stand-ups, and retrospectives. Document application changes, migration steps, and configurations. Share knowledge with team members to ensure consistent understanding of application and migration processes. Requirements: Minimum of 3+ year experience in a security engineering role, with experience in network security, application security, and security frameworks. Bachelor's degree in related area and / or equivalent experience / training. Strong understanding of AWS services like EC2, S3, RDS, Lambda, and VPC configurations. Familiarity with AWS migration tools, such as AWS MGN, DMS, and Migration Hub. Experience in deploying, configuring, and managing applications in cloud environments. Knowledge of microservices architecture and containerization tools like Docker and ECS. Proficiency in scripting languages such as Python, Shell, or PowerShell for automation. Experience with Infrastructure as Code tools like Terraform, AWS CloudFormation, or CDK. Hands-on experience with monitoring tools like AWS CloudWatch, X-Ray, or third-party solutions like Datadog. Strong problem-solving skills for application performance and dependency issues. Experience working in Scrum or Agile teams, adhering to iterative delivery and collaborative practices. Strong analytical and troubleshooting abilities. Excellent communication and teamwork skills. Ability to manage multiple priorities in a fast-paced environment. Excellent computer proficiency including JIRA Nice to have skills: Understanding of advanced services like AWS Step Functions, EventBridge, and Aurora. Experience with AWS serverless technologies like API Gateway, Lambda, and DynamoDB. Familiarity with CI/CD tools like GitHub Actions, Jenkins, or AWS CodePipeline. Knowledge of container orchestration tools such as Kubernetes (EKS). Experience in tuning application performance and cost optimization in AWS. Familiarity with caching solutions like ElastiCache or Content Delivery Networks (CDNs). Experience with migration validation, including data integrity, application functionality, and system dependencies. Ability to mentor junior engineers and contribute to team knowledge sharing. Proactive approach to identifying and resolving migration challenges. AWS Certified Developer - Associate or AWS Certified Solutions Architect - Associate Bilingual: English and Spanish US Citizen | US Resident Location: San Juan, PR EEO

For Automation services in the Engineering area. WHAT MAKES YOU A FIT: The Technical Part: Bachelor's Degree or Associate Degree with two (2) years of experience in the regulated industry. Bilingual (English & Spanish). Problem-solving and root cause analysis. Shift: Non-standard and according to business needs. 5:00 AM - 5:00 PM 5:00 PM - 5:00 AM Experience in: PLC programmer and troubleshoot. VFD, Sensors, Vision systems like Cognex, Keyence or Systech and ABB or Fanuc robots. The Personality Part: Besides being an Automation Pro, you're able to analyze data so that not a single inconsistency gets past you (which allows you to be an amazing problem-solver). You're also a skilled multitasker with an incredible ability to set priorities. Add to this a commitment to serving customers with high-quality research and products, to embracing a diverse work culture, and even to the environment, and you might just be what we're looking for! AS A PIECE OF FITS, YOU WILL: (The day-to-day on the job) Evaluate and determine if utility systems, process maintenance, instrumentation/calibration/electrical systems, and technical cleaning systems are required. Maintained in compliance with all applicable industry standards, regulatory standards, and FDA standards. Participate in the coordination of TECHSUPPORT on engineering, regulatory, and compliance. Calibration, quality, microbial/environmental, technical cleaning, validation, electrical, and process automation issues. Assist in the evaluation and implementation of engineering improvements, policy changes, compliance Improvements, and optimization programs. Identify and resolve all problems with process equipment and, where possible, minimize equipment downtime. Complete advanced maintenance activities, including but not limited to preventive maintenance, among other maintenance tasks. Monitor inspection and packaging equipment and investigate and troubleshoot advanced issues, including mechanical, electrical, or automation-related problems. Assist the team with maintaining an up-to-date working spare parts inventory system. Ensure that operational log paperwork, daily log files, and work order documentation are completed with accurate information. All work must be guided by team requirements or department objectives and completed in accordance with CFRs, cGMPs, SOPs, job plans, and clients' policies. Develop, revise, and review SOPs or job plans/work plans for work-related areas. Evaluate current maintenance procedures and assist with changes to optimize the maintenance program. Recognize and report malfunctions and adjust equipment. Provides technical expertise and acts as a resource/trainer to others on maintenance support tasks and/or in the use of all the equipment used in the area. Provides customer service to internal and external clients, including ongoing support with detailed technical information and troubleshooting. WHO WE ARE: We are a Service Provider company different from the rest. We pride ourselves in how we treat the most important piece of our company's puzzle: you! We integrate Engineering, Construction, Maintenance, Utilities and Specialized Technical services across the Island (and in the US as well!). Our company is flexible, family-oriented and focused on our resources' well-being, while providing our Pharmaceutical, Medical Device and Manufacturing industry clients with top-notch quality talent. We're FITS! Are you the next piece?

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access certain necessary systems. Security Clearance: None/Not Required We are seeking a skilled and motivated Electrical Engineer II to join our engineering team. The successful candidate will be responsible for conducting and maintaining Process Failure Mode and Effects Analysis (PFMEA) to ensure alignment with current manufacturing processes, identify potential risks, and drive process improvements. Additionally, the candidate will work closely with the team to implement corrective actions identified through Process FMEA, addressing potential failure modes and enhancing the overall robustness and reliability of the process. This role will be instrumental in proactively addressing operational challenges at the manufacturing site and collaborating with cross-functional teams to enhance product and process reliability, quality, and performance. This position will sit at our Santa Isabel, Puerto Rico location. Typically, 4 days a week onsite, and 1 day remote pending business needs. You must be residing in Puerto Rico at the time of starting employment. Relocation assistance is not offered. What You Will Do: Conduct and update Process Failure Mode and Effects Analysis (PFMEA) to reflect current manufacturing processes and identify potential risks. Collaborate with cross-functional teams to analyze failure modes, their effects, and corresponding mitigation strategies. Assist in identifying opportunities for process optimization and lead initiatives to improve efficiency, quality, and reliability. Proactively address day-to-day operational issues at the manufacturing site, ensuring timely resolution to minimize downtime and disruptions. Partner with quality, design, and manufacturing teams to ensure alignment on process improvements and product health objectives. Support communication and coordination between engineering teams and manufacturing personnel to maintain seamless operations. Analyze manufacturing and quality data to identify trends, risks, and opportunities for improvement. What You Will Learn: You will learn about our growing engineering team in Puerto Rico; What we do. Who we support. How we work. You will learn the technologies of today and tomorrow which we count on to maintain world leadership in the aerospace industry. You will learn why people enjoy themselves and feel fulfilled by working in our industry. Qualifications You Must Have: Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and minimum 2 years of prior relevant experience or an Advanced Degree in a related field Experience with Process Failure Mode and Effects Analysis (PFMEA) and risk mitigation strategies Demonstrated professional experience communicating in English (verbal and written) Qualifications We Prefer: Proficiency in data analysis tools (e.g., Excel, Minitab) and experience with manufacturing systems. Proficiency in Root Cause Analysis and Corrective Actions to improve yield (e.g., fault tree analysis, 5 Why, fishbone diagrams). Experience reading and interpreting assembly drawings, circuit card schematics, and assembly instructions. Familiarity with electronics design and related processes. Familiarity with manufacturing equipment and quality assurance techniques. Ability to review production data and identify trends in manufacturing failures. Analytical and problem-solving skills, with the ability to identify root causes and implement effective solutions. Excellent communication and collaboration skills to work effectively in a cross-functional team environment. What We Offer Some of our competitive benefits packages include: Medical, dental, and vision insurance Three weeks of vacation for newly hired employees Generous 401(k) plan that includes employer matching funds Participation in the Employee Scholar Program (ESP) Life insurance and disability coverage Employee Assistance Plan, including up to 8 free counseling sessions. And more! Learn More & Apply Now! Collins Aerospace, an RTX business, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. Join our growing engineering team in Puerto Rico, where you will provide critical support to all Collins SBUs, working on exciting programs and projects ranging from the development of the next generation of advanced concept ejection seats to the latest technologies for the U.S. warfighter. WE ARE REDEFINING AEROSPACE. * Please consider the following role type definition as you apply for this role. Hybrid: Employees who are working in Hybrid roles will work regularly both onsite and offsite. Ratio of time working onsite will be determined in partnership with your leader. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

We are seeking an experienced Electrical Engineer / Inspector to support infrastructure and facility projects with our direct client. The position involves both engineering design review and field quality assurance/inspection duties, ensuring compliance with USACE standards, NEC, and federal regulations. The ideal candidate will have strong technical knowledge of electrical systems, experience in construction oversight, and the ability to coordinate across multidisciplinary teams to deliver successful, compliant projects. Job Tittle: Electrical Engineer / QA Inspector Duration: 12 Months Location: Salinas, Puerto Rico 00751 Design and Technical Oversight: • Review and evaluate electrical design drawings, calculations, and specifications for compliance with USACE, NEC, UFC, NFPA, and other federal standards. • Support design development for low and medium voltage power distribution, lighting, grounding, and communication systems. • Coordinate with mechanical, structural, and civil disciplines to ensure integrated system design. • Prepare design analyses, technical reports, and recommendations to support project development and execution. • Participate in constructability reviews, value engineering, and life-cycle cost evaluations. • Construction and Quality Assurance • Conduct field inspections and quality assurance surveillance for electrical systems and related works. • Monitor Contractor Quality Control (QC) operations to ensure compliance with project specifications and safety standards. • Receive, review, and process submittals and shop drawings using RMS; ensure proper documentation, review, and reporting. • Prepare and submit daily inspection reports documenting progress, labor, materials, and any observed deficiencies. • Maintain records of materials, test results, and “as-built” conditions. • Conduct joint, pre-final, and final inspections and verify corrective actions are completed. • Inspect safety precautions and enforce corrective measures for noncompliance. • Participate in commissioning and testing of electrical and control systems. Project and Field Support: • Review construction materials, workmanship, and adherence to approved submittals. • Inspect installations including power distribution systems, lighting, switchboards, motors, controllers, transmitters, automatic controls, air conditioning systems, and pumping stations. • Verify performance of testing and collect samples for laboratory analysis. • Monitor project progress and estimate work completion percentages. • Assist with coordination for utility relocations (electrical and communication systems). Qualifications: · Bachelor's degree in Electrical Engineering from an accredited institution. · 5-10 years of relevant experience in electrical design, construction, or project inspection (USACE or federal experience preferred). · Professional Engineer (PE) license preferred but not required. · Proficiency with AutoCAD, RMS, and Microsoft Office Suite. · In-depth knowledge of NEC, UFC, NFPA, and USACE engineering procedures. · Strong documentation, reporting, and communication skills. · Ability to interpret construction schedules and safety plans. · Ability to travel to project sites within the USACE Caribbean District as needed. Preferred Experience: · Prior work on USACE, NAVFAC, or other federal design/construction projects. · Experience with backup power systems, renewable energy, and energy efficiency initiatives. · Familiarity with design-build delivery and government submittal processes. · Knowledge of LEED or sustainable design standards. · Experience overseeing major civil works and vertical construction projects such as hurricane gates, Army reserve centers, schools, and housing facilities.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access certain necessary systems. Security Clearance: None/Not Required We are seeking a skilled and motivated Electrical Engineer II to join our engineering team. The successful candidate will be responsible for conducting and maintaining Process Failure Mode and Effects Analysis (PFMEA) to ensure alignment with current manufacturing processes, identify potential risks, and drive process improvements. Additionally, the candidate will work closely with the team to implement corrective actions identified through Process FMEA, addressing potential failure modes and enhancing the overall robustness and reliability of the process. This role will be instrumental in proactively addressing operational challenges at the manufacturing site and collaborating with cross-functional teams to enhance product and process reliability, quality, and performance. This position will sit at our Santa Isabel, Puerto Rico location. Typically, 4 days a week onsite, and 1 day remote pending business needs. You must be residing in Puerto Rico at the time of starting employment. Relocation assistance is not offered. What You Will Do: * Conduct and update Process Failure Mode and Effects Analysis (PFMEA) to reflect current manufacturing processes and identify potential risks. * Collaborate with cross-functional teams to analyze failure modes, their effects, and corresponding mitigation strategies. * Assist in identifying opportunities for process optimization and lead initiatives to improve efficiency, quality, and reliability. * Proactively address day-to-day operational issues at the manufacturing site, ensuring timely resolution to minimize downtime and disruptions. * Partner with quality, design, and manufacturing teams to ensure alignment on process improvements and product health objectives. * Support communication and coordination between engineering teams and manufacturing personnel to maintain seamless operations. * Analyze manufacturing and quality data to identify trends, risks, and opportunities for improvement. What You Will Learn: * You will learn about our growing engineering team in Puerto Rico; What we do. Who we support. How we work. * You will learn the technologies of today and tomorrow which we count on to maintain world leadership in the aerospace industry. * You will learn why people enjoy themselves and feel fulfilled by working in our industry. Qualifications You Must Have: * Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and minimum 2 years of prior relevant experience or an Advanced Degree in a related field * Experience with Process Failure Mode and Effects Analysis (PFMEA) and risk mitigation strategies * Demonstrated professional experience communicating in English (verbal and written) Qualifications We Prefer: * Proficiency in data analysis tools (e.g., Excel, Minitab) and experience with manufacturing systems. * Proficiency in Root Cause Analysis and Corrective Actions to improve yield (e.g., fault tree analysis, 5 Why, fishbone diagrams). * Experience reading and interpreting assembly drawings, circuit card schematics, and assembly instructions. * Familiarity with electronics design and related processes. * Familiarity with manufacturing equipment and quality assurance techniques. * Ability to review production data and identify trends in manufacturing failures. * Analytical and problem-solving skills, with the ability to identify root causes and implement effective solutions. * Excellent communication and collaboration skills to work effectively in a cross-functional team environment. What We Offer Some of our competitive benefits packages include: * Medical, dental, and vision insurance * Three weeks of vacation for newly hired employees * Generous 401(k) plan that includes employer matching funds * Participation in the Employee Scholar Program (ESP) * Life insurance and disability coverage * Employee Assistance Plan, including up to 8 free counseling sessions. * And more! Learn More & Apply Now! Collins Aerospace, an RTX business, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. Join our growing engineering team in Puerto Rico, where you will provide critical support to all Collins SBUs, working on exciting programs and projects ranging from the development of the next generation of advanced concept ejection seats to the latest technologies for the U.S. warfighter. WE ARE REDEFINING AEROSPACE. * Please consider the following role type definition as you apply for this role. Hybrid: Employees who are working in Hybrid roles will work regularly both onsite and offsite. Ratio of time working onsite will be determined in partnership with your leader. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access certain necessary systems. Security Clearance: None/Not Required We are seeking a skilled and motivated Electrical Engineer II to join our engineering team. The successful candidate will be responsible for conducting and maintaining Process Failure Mode and Effects Analysis (PFMEA) to ensure alignment with current manufacturing processes, identify potential risks, and drive process improvements. Additionally, the candidate will work closely with the team to implement corrective actions identified through Process FMEA, addressing potential failure modes and enhancing the overall robustness and reliability of the process. This role will be instrumental in proactively addressing operational challenges at the manufacturing site and collaborating with cross-functional teams to enhance product and process reliability, quality, and performance. This position will sit at our Santa Isabel, Puerto Rico location. Typically, 4 days a week onsite, and 1 day remote pending business needs. You must be residing in Puerto Rico at the time of starting employment. Relocation assistance is not offered. What You Will Do: Conduct and update Process Failure Mode and Effects Analysis (PFMEA) to reflect current manufacturing processes and identify potential risks. Collaborate with cross-functional teams to analyze failure modes, their effects, and corresponding mitigation strategies. Assist in identifying opportunities for process optimization and lead initiatives to improve efficiency, quality, and reliability. Proactively address day-to-day operational issues at the manufacturing site, ensuring timely resolution to minimize downtime and disruptions. Partner with quality, design, and manufacturing teams to ensure alignment on process improvements and product health objectives. Support communication and coordination between engineering teams and manufacturing personnel to maintain seamless operations. Analyze manufacturing and quality data to identify trends, risks, and opportunities for improvement. What You Will Learn: You will learn about our growing engineering team in Puerto Rico; What we do. Who we support. How we work. You will learn the technologies of today and tomorrow which we count on to maintain world leadership in the aerospace industry. You will learn why people enjoy themselves and feel fulfilled by working in our industry. Qualifications You Must Have: Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and minimum 2 years of prior relevant experience or an Advanced Degree in a related field Experience with Process Failure Mode and Effects Analysis (PFMEA) and risk mitigation strategies Demonstrated professional experience communicating in English (verbal and written) Qualifications We Prefer: Proficiency in data analysis tools (e.g., Excel, Minitab) and experience with manufacturing systems. Proficiency in Root Cause Analysis and Corrective Actions to improve yield (e.g., fault tree analysis, 5 Why, fishbone diagrams). Experience reading and interpreting assembly drawings, circuit card schematics, and assembly instructions. Familiarity with electronics design and related processes. Familiarity with manufacturing equipment and quality assurance techniques. Ability to review production data and identify trends in manufacturing failures. Analytical and problem-solving skills, with the ability to identify root causes and implement effective solutions. Excellent communication and collaboration skills to work effectively in a cross-functional team environment. What We Offer Some of our competitive benefits packages include: Medical, dental, and vision insurance Three weeks of vacation for newly hired employees Generous 401(k) plan that includes employer matching funds Participation in the Employee Scholar Program (ESP) Life insurance and disability coverage Employee Assistance Plan, including up to 8 free counseling sessions. And more! Learn More & Apply Now! Collins Aerospace, an RTX business, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. Join our growing engineering team in Puerto Rico, where you will provide critical support to all Collins SBUs, working on exciting programs and projects ranging from the development of the next generation of advanced concept ejection seats to the latest technologies for the U.S. warfighter. WE ARE REDEFINING AEROSPACE. * Please consider the following role type definition as you apply for this role. Hybrid: Employees who are working in Hybrid roles will work regularly both onsite and offsite. Ratio of time working onsite will be determined in partnership with your leader. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

We offer you the opportunity to utilize and expand your academic background in engineering: You will work on a multi-discipline engineering team involved in nuclear power plant instrumentations and controls betterment projects. These projects are a synergistic integration of both electrical and mechanical engineering along with control theory. You will work with electronic process sensors, digital controllers, touchscreen displays, pumps, valves, heat exchangers, steam turbines and reactors to improve the functionality of nuclear power plants. You will prepare specifications for the procurement of instrumentation and controls equipment as well as engineering calculations associated with plant upgrades and modifications. Through mentoring, classroom-style technical sessions, and on-the-job training, you will increase your knowledge and skills in your engineering discipline. You will also have the opportunity to travel to client and vendor offices for design reviews and to plant site locations for project coordination and field verification of designs. This position is based on a hybrid work schedule and will require in-office work 3 days per week. Qualifications We do not sponsor employees for work authorization in the U.S. for this position. A Bachelor's and/or Master's degree in Electrical, Mechanical, or Chemical Engineering (from an ABET accredited program) with a strong academic background and coursework in analog and digital control systems is A minimum of 3 years of experience in design engineering for power plant control systems Coursework in mechatronics is desired, but not required Excellent written and verbal communication skills Must be bilingual in Spanish and English (Speak, Read, and Write) Award-Winning Benefits At Sargent & Lundy, we care about the health and well-being of our employees. Our commitment extends beyond the workplace, offering comprehensive healthcare plans and generous paid time off to support our team members in every aspect of their lives. We understand the importance of work-life balance, which is why we are proud to provide competitive, award-winning benefits. Our dedication to employee satisfaction has earned us the prestigious Top Workplaces Culture Excellence Award for compensation and benefits in 2022, 2023, and 2024. Health & Wellness Financial Benefits Work-Life Balance Health Plans: Medical, Dental, Vision Life & Accident Insurance Disability Coverage Employee Assistance Program (EAP) Back-Up Daycare FSA & HSA 401(k) Pre-Tax Commuter Account Merit Scholarship Program Employee Discount Program Corporate Charitable Giving Program Tuition Assistance First Professional Licensure Bonus Employee Referral Bonus Paid Annual Personal/Sick Time (PST) Paid Vacation Paid Holidays Paid Parental Leave Paid Bereavement Leave Flexible Work Arrangements About This Business Unit Join Sargent & Lundy's Nuclear Power Group and be part of a team driving the future of clean, carbon-free energy. Since 1954, we've been a trusted leader in nuclear engineering, design, and licensing, with expertise spanning small modular reactors (SMRs), advanced reactor technology (ART), and first-of-a-kind commercial reactor restart projects. Our work supports life extensions and digital modernization of existing nuclear plants, coal-to-nuclear conversion initiatives with the Department of State, and international nuclear new-build projects. With a commitment to safety, innovation, and sustainability, we provide cutting-edge solutions that power communities worldwide while reducing emissions. Shape the future of global energy with us! Awards & Recognition Equal Opportunity Sargent & Lundy is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any protected status as defined by applicable law.

Come be a part of our team to support our client's infrastructure projects in Puerto Rico have a hand in transforming tomorrow! As an Instrumentation and Controls Engineer (I&C) Water/Wastewater, you will play an important part of our electrical and process engineering team as you complete a variety of technical tasks in the design and operation of SCADA and Automation systems for water/wastewater treatment facilities, supporting our clients in both our local offices and client sites. Typical duties will include * Evaluate and develop alternative control system solutions that meet client requirements. * Develop design reports, specifications, plans, and associated client deliverables for the I&C, telemetry, and SCADA systems. * Specify instruments, controllers, computers, servers, ancillary equipment and components, and application software. * Assist in defining interface requirements for process valves, adjustable frequency drives, and packaged systems. * Develop new and modify existing application programming in PLCs (programmable logic controllers), HMIs (human machine interfaces), and associated components. * Participate in consulting, design, construction, planning, commissioning/start-up, training, and close-out phase activities. * Create documentation for application software. * Work with and coordinate SCADA system requirements with other disciplines, including civil, structural, architectural, process mechanical, HVAC, plumbing, and electrical during the design phase. * Interact with clients to gain an understanding of their systems. * Work with contractors and sub-contractors to resolve issues during construction and commissioning/start-up. * Collaborate and develop solutions with multi-disciplinary senior-level leaders. * Attend meetings (on-site/off-site or video conferencing) and provide official project status reports per the frequency required (daily, weekly, bi-weekly, etc.). * Provide project management support in any form, demonstrating compliance with all directives and other applicable standards to include records management. If you are up to the challenge, we've been looking for someone just like you to join our team to help us transform tomorrow. * Bachelor's degree in Electrical Engineering from an accredited college/university. * Demonstrated professional experience in the Instrumentation and Controls (I&C) field. * Field experience inspecting newly installed control systems for conformity with contract documents. #LI-DL1 Jacobs is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language.

At Burns & McDonnell, you're in control of your career potential. And with more than 350 service specialties, you can grow within the company. Our formula is simple: hire the best people, find out what they enjoy and are great at, and help them succeed. You'll lead or support important projects for interesting clients and reap the rewards of employee-ownership - a difference maker with tangible and intangible benefits. You'll serve clients and will have the potential for collaboration with multiple Burns & McDonnell offices. create amazing, for clients and for yourself. If you are passionate about the work you do and want to keep growing in your career, we want to talk to you! The Staff Distribution Engineer will work on a variety of 2.4kV to 34.5kV overhead and underground utility distribution projects. The Staff Distribution Engineer will work with a project team to implement effective and creative solutions for the distribution grid according to budget constraints, design factors and client needs. This position will require interfacing with utility clients and collaboration with multiple offices. This exciting opportunity will provide latitude for continued professional growth. Job Duties: + Prepare and develop distribution and sub transmission voltage construction packages for both overhead and underground projects, including distribution equipment installation, feeder replacement, cable replacement, and new feeder design. + Develop routing analysis for the design of low to medium voltage (2.4-120kV) distribution and sub transmission lines using CADD/GIS design and mapping software. + Determine construction feasibility through route studies, conflict analysis, and construction cost estimating. + Perform field inspections, measurements or calculations for overhead and underground electric facilities on public and private utility systems. + Leverage commercially available simulation software and other tools to evaluate different scenarios and make informed recommendations to the client. + Produce reports and visualizations to communicate technical results and interpretation of trends; effectively communicate findings and recommendations to all areas of the business. + Work closely with the project team to ensure deliverables and services are being provided to client's satisfaction. + Work closely with the project team to ensure that projects are following internal QA/QC guidelines. + Perform QA/QC reviews of studies, reports, and construction design packages. + Prepare calculations and assist with equipment specifications, such as cable pulling calculations, voltage drop, pole loading. + Prepare proposals, engineering/project cost estimates, and execution schedules. + Provide leadership, guidance and instruction to less experienced staff members. + Regularly meet and correspond with clients, subcontractors, or outside personnel. + Other duties as assigned. **Qualifications** + Bachelor's degree in engineering from an accredited program required. + Minimum 3 years distribution experience (completion of master's degree in a related field may be substituted for one year of experience). + Excellent written and verbal communication skills. + Knowledge of overhead and underground construction methods and distribution system equipment. + Experience conducting distribution field inspections. + Understanding of distribution power flow. + Experience with various distribution design tools, as well as CADD and GIS to aid in design. + Familiarity with topographic mapping & surveying, and subsurface utility engineering/utility locating procedures and practices. + Knowledge regarding easements, right-of-way, and permitting. + Strong analytical and problem-solving skills. + Capable of devising new, more efficient approaches to solving problems and processes. + Able to handle multiple projects simultaneously and to prioritize work. + Engineer in Training (EIT) Certification or Professional Engineering (PE) Certification is strongly preferred. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Electrical Engineering **Primary Location** US-PR-San Juan **Schedule:** Full-time **Travel:** Yes, 15 % of the Time **Req ID:** 253299 **Job Hire Type** Experienced #LI-JH #T&D N/A

At INVID, we're looking for a highly skilled and motivated Azure Application Engineer to lead the automation, scalability, and reliability of our cloud infrastructure within the Microsoft Azure ecosystem. This role is essential in bridging development and operations, ensuring seamless CI/CD pipelines, secure deployments, and a resilient cloud architecture. The ideal candidate is passionate about Infrastructure as Code, cloud-native technologies, and driving continuous improvement. You'll collaborate closely with our development, QA, and security teams to implement best practices in DevOps and cloud security, while optimizing performance, cost-efficiency, and system resilience. Requirements: Analyze application architecture and dependencies to determine cloud readiness and define migration strategies (Rehost, Refactor, Replatform). Collaborate with architects to ensure application design aligns with Azure cloud best practices. Assist in migrating applications to Azure using tools like Azure Migrate, Database Migration Service (DMS), and Azure App Service Migration Assistant. Configure and deploy applications on Azure infrastructure, ensuring minimal downtime. Validate application functionality, data consistency, and system performance after migration. Troubleshoot and resolve application issues to ensure seamless operation in the Azure environment. Configure applications to leverage Azure services such as Azure App Service, Azure SQL, Azure Functions, and Cosmos DB. Implement monitoring and logging solutions using Azure Monitor, Log Analytics, and Application Insights. Collaborate with DevOps teams to integrate applications into CI/CD pipelines using Azure DevOps or GitHub Actions. Develop scripts and automation workflows for repeatable application setup and configuration. Work closely with migration architects, cloud engineers, and QA teams to ensure successful migrations. Actively participate in Scrum ceremonies, including sprint planning, daily stand-ups, and retrospectives. Maintain comprehensive documentation for application configurations, migration processes, and test results. Share insights and knowledge with team members to enhance overall migration efficiency. Requirements: Minimum of 3+ year experience in a security engineering role, with experience in network security, application security, and security frameworks. Bachelor's degree in related area and / or equivalent experience / training. Proficient in Azure services such as Virtual Machines, Azure App Service, Azure SQL Database, Storage Accounts, and Networking (VNets, NSGs). Experience with Azure migration tools like Azure Migrate, DMS, and App Service Migration Assistant. Strong experience in deploying, configuring, and maintaining applications in Azure environments. Familiarity with modern application architectures, including microservices and serverless computing. Proficiency in scripting languages such as PowerShell, Python, or Bash. Experience with Infrastructure as Code (IaC) tools like ARM templates, Bicep, or Terraform. Hands-on experience with Azure Monitor, Application Insights, and Log Analytics for application monitoring. Strong problem-solving skills for diagnosing application and system issues. Experience working in agile environments, participating in Scrum practices, and contributing to iterative delivery. Excellent analytical and troubleshooting skills. Strong communication and collaboration abilities. Detail-oriented with a focus on delivering high-quality outcomes. Strong analytical and troubleshooting abilities. Excellent communication and teamwork skills. Ability to manage multiple priorities in a fast-paced environment. Excellent computer proficiency including JIRA Nice to have skills: · Experience with advanced Azure services like AKS (Azure Kubernetes Service), Azure Logic Apps, and Azure Synapse Analytics. · Understanding of Azure Identity and Access Management (IAM) and security best practices. · Familiarity with Azure Cache for Redis and Content Delivery Networks (CDNs) for performance optimization. · Knowledge of scaling and tuning applications on Azure for cost-efficiency and performance. · Experience with CI/CD pipelines in Azure DevOps or GitHub Actions. · Knowledge of containerization and orchestration tools such as Docker and Kubernetes. · Proficiency in validating application functionality, data consistency, and workload dependencies during migrations. · Microsoft Certified: Azure Developer Associate or Azure Solutions Architect Expert. · Ability to mentor and guide junior engineers. · Proactive and adaptable in dynamic project environments Other Requirements: Must be bilingual (English and Spanish) Must be a US Citizen | US Resident Location: HYBRID in San Juan, Puerto Rico EEO

**Country:** United States of America ** Hybrid **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Collins Aerospace's Global Engineering & Technology Center in Puerto Rico (GETC-PR) is looking to hire a Electrical Design Engineer with passion for problem solving and delivering solutions. As Electrical Designer will be part of an integrated product team of engineers that design and support aerospace flight control and engine control electronic applications. Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for military and commercial purposes. This position will sit at our **Aguadilla, Puerto Rico** location. You must be residing in Puerto Rico at the time of starting employment. _Relocation assistance is not offered._ This role is categorized as **hybrid** , with 3 days onsite and 2 days remote following the schedule assigned by the Manager. **What You Will Do:** + Troubleshoots electrical device problems to ensure that issues are resolved efficiently. + Designs, modifies, and evaluates electronic apparatus, components, or circuitry for use in other equipment and devices. + Researches, develops, designs, and tests electrical components, equipment, systems, and networks. + Designs electrical equipment, components, products, and systems for commercial, industrial, and domestic purposes. + Produces deliverables according to specifications, using the most cost effective and efficient means. + Analyzes and evaluates new or improved electronic components. **What You Will Learn:** + You will learn about our growing engineering team in Puerto Rico; What we do. Who we support. How we work. + You will learn the technologies of today and tomorrow which we count on to maintain world leadership in the aerospace industry. + You will learn why people enjoy and feel fulfilled by working in our industry. **Qualifications You Must Have:** + Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and minimum 2 years of prior relevant experience or an Advanced Degree in a related field + Experience with electrical engineering, electrical design concepts, and/or electronics trouble shooting + Demonstrated professional experience communicating in English (verbal and written) **Qualifications We Prefer:** + Experience working in the aerospace industry + Bachelor's degree in electrical engineering, electronics technology, or related + Experience with analog and digital interfaces, electronic analysis techniques and laboratory test equipment including oscilloscopes, logic analyzes, and other related test equipment. + Experience reading and understanding assembly drawings, circuit card schematics, and assembly instructions + Ability to review production data and identify trends in manufacturing failures + Ability to troubleshoot potential causes of production failures and devise a solution to prevent repeat issues in the future + Ability to complete a root cause analysis (e.g. fault tree, 5 Why, fishbone) + Familiarity with manufacturing equipment and quality assurance techniques + Ability to evaluate engineering processes and provide recommendations to increase efficiency + Knowledge of PCD tools such as Mentor Graphics, Cadence, etc. + Knowledge on Printed Circuit Design (PCD) or related + Knowledge in Power Electronics **What We Offer** Some of our competitive benefits package includes: + Medical, dental, and vision insurance + Three weeks of vacation for newly hired employees + Generous 401(k) plan that includes employer matching funds + Participation in the Employee Scholar Program (ESP) + Life insurance and disability coverage + Employee Assistance Plan, including up to 8 free counseling sessions. + And more! **Learn More & Apply Now!** Collins Aerospace, an RTX business, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. Join our growing engineering team in **Puerto Rico** , where you will provide critical support to all Collins SBUs, working on exciting programs and projects ranging from the development of the next generation of advanced concept ejection seats to the latest technologies for the U.S. warfighter. **WE ARE REDEFINING AEROSPACE.** * Please consider the following role type definition as you apply for this role. **Hybrid:** Employees who are working in Hybrid roles will work regularly both onsite and offsite. Ratio of time working onsite will be determined in partnership with your leader. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.