Controls engineer jobs in Virginia

We are seeking a highly skilled and detail-oriented Electrical Engineer to join our engineering team. This role is focused on the design and development of rugged, high-performance electronics used in mission-critical defense applications with a strong emphasis on PCB layout and design. Experience or interest in RF circuit and antenna design is a significant plus. The ideal candidate will bring a deep understanding of electronics design, with the ability to contribute across the full product development lifecycle-from concept and prototyping through production and sustainment. Clearance: An ACTIVE Secret Clearance is required for this position. Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information. US Citizenship is required to obtain a clearance. Requirements: 3+ years of experience in microelectronics design and development, with a strong emphasis on PCB layout and design. Proficiency in tools such as Altium Designer, Eagle, OrCAD, or similar. Solid foundation in analog/digital circuit theory and practical design. Familiarity with lab testing tools (oscilloscopes, spectrum analyzers, VNAs, etc.). Understanding of DFM/DFT/DFA best practices in a defense context. Strong organizational and communication skills, with an attention to detail. Responsibilities: Design, analyze, and validate analog, digital, and RF circuitry for embedded systems. Lead PCB layout and design for high-reliability, multi-layer boards, ensuring compliance with military standards (MIL-STD) and IPC class specifications. Integrate a wide range of sensors (IMUs, GPS, environmental, etc.) and communication modules (LTE, UHF, SATCOM, etc.) into embedded and modular systems. Develop and integrate RF front-ends and antennas for secure communications and sensor applications. Perform schematic capture, BOM generation, layout, and detailed documentation for design reviews and production. Collaborate closely with firmware, mechanical, systems, and test engineers to deliver ruggedized and SWaP-optimized solutions. Conduct signal integrity analysis, power distribution verification, and electromagnetic compatibility (EMC) assessments. Support environmental and compliance testing including EMI/EMC, shock, vibration, and thermal. Maintain design documentation and contribute to configuration management and version control. Preferred Skills and Experience: Experience with RF circuit design, including filters, LNAs, mixers, and impedance-matched networks. Knowledge of antenna design and integration for applications including GNSS, SATCOM, cellular, telemetry, etc. Experience designing low power and ultra low power embedded devices Hands-on experience with RF simulation tools such as CST, HFSS, or Keysight ADS. Familiarity with military standards (MIL-STD) related to microelectronics Background in embedded systems, microcontrollers, and interface protocols (SPI, I2C, UART, Ethernet). Experience in end-to-end lifecycle development for defense platforms. Education: Bachelor's degree in Electrical Engineering or a related field (Master's preferred) Compensation: Compensation at SimVentions is determined by a number of factors, including, but not limited to, the candidate's experience, education, training, security clearance, work location, skills, knowledge, and competencies, as well as alignment with our corporate compensation plan and contract specific requirements. The projected annual compensation range for this position is $85K - $155K (USD). This estimate reflects the standard salary range for this position and is just one component of the total compensation package that SimVentions offers. Benefits: At SimVentions, we're committed to supporting the total well-being of our employees and their families. Our benefit offerings include comprehensive health and welfare plans to serve a variety of needs. We offer: Medical, dental, vision, and prescription drug coverage Employee Stock Ownership Plan (ESOP) Competitive 401(k) programs Retirement and Financial Counselors Health Savings and Health Reimbursement Accounts Flexible Spending Accounts Life insurance, short- & long-term disability Continuing Education Assistance Paid Time Off, Paid Holidays, Paid Leave (e.g., Maternity, Paternity, Jury Duty, Bereavement, Military) Third Party Employee Assistance Program that offers emotional and lifestyle well-being services, to include free counseling Supplemental Benefit Program Why Work for SimVentions?: SimVentions is about more than just being a place to work with other growth-orientated technically exceptional experts. It's also a fun place to work. Our family-friendly atmosphere encourages our employee-owners to imagine, create, explore, discover, and do great things together. Support Our Warfighters SimVentions is a proud supporter of the U.S. military, and we take pride in our ability to provide relevant, game-changing solutions to our armed men and women around the world. Drive Customer Success We deliver innovative products and solutions that go beyond the expected. This means you can expect to work with a team that will allow you to grow, have a voice, and make an impact. Get Involved in Giving Back We believe a well-rounded company starts with well-rounded employees, which is why we offer diverse service opportunities for our team throughout the year. Build Innovative Technology SimVentions takes pride in its innovative and cutting-edge technology, so you can be sure that whatever project you work on, you will be having a direct impact on our customer's success. Work with Brilliant People We don't just hire the smartest people; we seek experienced, creative individuals who are passionate about their work and thrive in our unique culture. Create Meaningful Solutions We are trusted partners with our customers and are provided challenging and meaningful requirements to help them solve. Employees who join SimVentions will enjoy additional perks like: Employee Ownership: Work with the best and help build YOUR company! Family focus: Work for a team that recognizes the importance of family time. Culture: Add to our culture of technical excellence and collaboration. Dress code: Business casual, we like to be comfortable while we work. Resources: Excellent facilities, tools, and training opportunities to grow in your field. Open communication: Work in an environment where your voice matters. Corporate Fellowship: Opportunities to participate in company sports teams and employee-led interest groups for personal and professional development. Employee Appreciation: Multiple corporate events throughout the year, including Holiday Events, Company Picnic, Imagineering Day, and more. Founding Partner of the FredNats Baseball team: Equitable distribution of tickets for every home game to be enjoyed by our employee-owners and their families from our private suite. Food: We have a lot of food around here! FTAC

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. AWS is looking for a dynamic Commissioning Engineer. It is the responsibility of all Amazonians to have alignment with our leadership principles and demonstrate these at the highest level. The responsibilities of the ACx Commissioning Engineer (CxE) include, but are not limited to, oversight and coordination of multi-discipline division of work related to design review and commissioning of Amazon critical infrastructure for new construction and special projects. The CxE is responsible for supporting vendors, contractors, and other teams involved in the construction and commissioning of various systems including medium and low voltage power systems, Generators, UPS, HVAC, Chilled Water, BMS, and EPMS systems. They shall provide multi-discipline input into the scheduling, test script development, designing, and planning of projects. In addition, the CxE will be required to develop and review electrical and mechanical component and integrated systems testing along with other commissioning documents to ensure they are compliant with the basis of design, specification, industry standards and sequence of operations. It is the CxE responsibility to ensure that all commissioning procedures follow the appropriate safety practices and policies. CxE is responsible for auditing commissioning activities continuously to ensure compliance with environmental, quality, and safety requirements. The CxE proactively communicates with the ACx Regional Manager and the ACx team to ensure that the applicable test documents are created and executed in accordance with all commissioning requirements. This individual will be responsible for comprehensive weekly reporting of status of all ongoing projects, lessons learned, and program improvements to continually improve the quality of our program. This position will include coverage of multiple inflight projects and tight schedules. Key job responsibilities Physical Requirements • Walk job sites in uneven terrain • Work at heights and from ladders • Regularly walk, use hands and fingers, reach with hands and arms, stoop, kneel, crouch or crawl • Lift and/or move up to 49 pounds; and participate in group lifts for 50 pounds or more • Carry objects weighing up to 49 pounds for short distances • Work shifts longer than eight hours in duration with potential for night and weekends • Perform physical tasks throughout the day without becoming overly tired • Ability to manipulate small wires and objects easily • Work in a noisy environment • Work in environments that are colder or hotter than a normal office environment Additional Job Requirements • Ability to relocate to Northern Virginia / Greater DC area • Ability and willingness to travel domestic and internationally for up to 50% of the year. Typical travel is 20%. • Required to provide personal transportation for meetings and job visits away from the office; reimbursed. About the team Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (diversity) conferences, inspire us to never stop embracing our uniqueness. We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. #DCCD_AMER BASIC QUALIFICATIONS• 5+ years of engineering, installation, or startup/commissioning of electrical and mechanical systems • Bachelor's degree in Mechanical/Electrical Engineering or 5 years of relevant discipline work experience • High technical competency in either mechanical or electrical or control systems utilized in critical infrastructures, with the capability to learn and be trained in the others • Understand the design concept and intent by reviewing mechanical or electrical design documentation, including drawings, specifications, vendor submittals and sequences of operations and provide feedback on the same in accordance with Amazon standards for basis of design • Develop but majorly review commissioning documentation such as test plans, scripts and reports developed by vendors to ensure accuracy in accordance with the design requirements PREFERRED QUALIFICATIONS• Advanced knowledge Microsoft Office Suite - Word, Excel, Outlook required; advanced knowledge of SharePoint (or similar) preferred • Strong communication skills, detail oriented, highly organized, and able to work in high stress environments to maintain calm and respectful interaction with multiple teams • Advance knowledge of mechanical, electrical, and controls systems for critical infrastructures • Ability to read and edit construction documents (design drawings, control diagrams, specifications, etc.) • Experience developing and executing test procedures for mechanical or electrical systems/components based on design intent and approved equipment submittals Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105,100/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site.

We are seeking a highly skilled and detail-oriented Electrical Engineer to join our engineering team. This role is focused on the design and development of rugged, high-performance electronics used in mission-critical defense applications with a strong emphasis on PCB layout and design. Experience or interest in RF circuit and antenna design is a significant plus. The ideal candidate will bring a deep understanding of electronics design, with the ability to contribute across the full product development lifecycle-from concept and prototyping through production and sustainment. Clearance: An ACTIVE Secret Clearance is required for this position. Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information. US Citizenship is required to obtain a clearance. Requirements: GENERAL SKILLS AND ABILITIES: Oral Communications: Demonstrates ability to clearly and effectively articulate, present, and promote varied ideas and issues (to include sensitive or controversial topics) before a wide range of audiences. Makes clear and convincing oral presentations. Listens effectively; clarifies information as needed. Written Communications: Conveys written information in a clear, concise, organized, and convincing manner for the intended audience, using correct English grammar, punctuation, and spelling. Expresses thoughts persuasively and uses effective modes to reinforce message retention Ability to meet deadlines under pressure: Setting priorities for your own work in order to meet a deadline, coordinating work with other units in order to meet a deadline and setting work priorities and determining work assignments for other workers in order to meet a deadline date. Ability to work as a member of a team: Ability to work in multi-disciplinary teams to accomplish project objectives. Ability to do the work of the position without more than normal supervision: Ability to work independently, make decisions, plan operations, show job responsibility, and exercise initiative. Displays technical ability by identifying complex problems and reviews related information to develop and evaluate options and implement solutions. Demonstrates ability to independently handle and lead a range of directed tasks and problems, such as establishing project objectives, evaluating alternatives, selecting approach for meeting requirements and resolving technical problems, with minimal guidance from program management and/or program technical leads. Uses logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Through effective negotiation skills, consistently gains support of others, within and outside the organization for the implementation of proposed solutions. TECHNICAL SKILLS AND ABILITIES: Knowledge of the design, development, fabrication, and quality assurance of electrical and electronic systems that will be used in austere operational environments. Ability to learn and apply innovative technologies and techniques, within the electrical/electronic engineering discipline, toward to the products, processes, and capabilities. Displays technical ability and confidence by identifying problems and evaluating appropriate solutions. Demonstrates mature understanding of electrical engineering topics such as; analog/digital circuit design, embedded microcontroller design, and compact antenna design and integration. Able to perform, document, and defend modeling and analysis. Demonstrates mature knowledge and experience with test methodologies, diagnostic equipment, and software used to inspect, test, analyze, and resolve electrical systems and designs. Responsibilities: Conducts research, development, test, and integration of custom embedded systems and special communications capabilities. Contributes to the development of rapid engineering solutions to emergent non-conventional threats, specializing in turning high-level requirements into engineering designs that integrate microelectronics with novel fabrication techniques. Completes the design and development of electrical circuits, RF receivers, and electrically-small antenna designs with minimal oversight and guidance. Performs analog/digital circuit design, embedded microcontroller design, and compact antenna design and integration. Performs modeling of circuits, schematic capture, PCB layout, and circuit assembly / fabrication techniques. Develop coding to enable electronic designs. Presents technical status and decisions during design reviews. Supports integration and testing of developed products to ensure reliable functionality. Participates and leads developmental and verification testing, including extensive electromagnetic and environmental testing to enable rapid response to emergent Navy and national requirements. Work with Project Lead(s) to analyze and refine requirements, perform alternative solutions by research and investigation, and identify technical risks. Develop prototypes (in concert with technicians, as necessary) to prove out prototype designs Coordinate with mechanical engineers regarding the integration of designs into customized mechanical packages Develop documentation of design solutions and adhere to established configuration management processes Education: Bachelor's degree in Electrical Engineering or a related field (Master's preferred) Compensation: Compensation at SimVentions is determined by a number of factors, including, but not limited to, the candidate's experience, education, training, security clearance, work location, skills, knowledge, and competencies, as well as alignment with our corporate compensation plan and contract specific requirements. The projected annual compensation range for this position is $85K - $155K (USD). This estimate reflects the standard salary range for this position and is just one component of the total compensation package that SimVentions offers. Benefits: At SimVentions, we're committed to supporting the total well-being of our employees and their families. Our benefit offerings include comprehensive health and welfare plans to serve a variety of needs. We offer: Medical, dental, vision, and prescription drug coverage Employee Stock Ownership Plan (ESOP) Competitive 401(k) programs Retirement and Financial Counselors Health Savings and Health Reimbursement Accounts Flexible Spending Accounts Life insurance, short- & long-term disability Continuing Education Assistance Paid Time Off, Paid Holidays, Paid Leave (e.g., Maternity, Paternity, Jury Duty, Bereavement, Military) Third Party Employee Assistance Program that offers emotional and lifestyle well-being services, to include free counseling Supplemental Benefit Program Why Work for SimVentions?: SimVentions is about more than just being a place to work with other growth-orientated technically exceptional experts. It's also a fun place to work. Our family-friendly atmosphere encourages our employee-owners to imagine, create, explore, discover, and do great things together. Support Our Warfighters SimVentions is a proud supporter of the U.S. military, and we take pride in our ability to provide relevant, game-changing solutions to our armed men and women around the world. Drive Customer Success We deliver innovative products and solutions that go beyond the expected. This means you can expect to work with a team that will allow you to grow, have a voice, and make an impact. Get Involved in Giving Back We believe a well-rounded company starts with well-rounded employees, which is why we offer diverse service opportunities for our team throughout the year. Build Innovative Technology SimVentions takes pride in its innovative and cutting-edge technology, so you can be sure that whatever project you work on, you will be having a direct impact on our customer's success. Work with Brilliant People We don't just hire the smartest people; we seek experienced, creative individuals who are passionate about their work and thrive in our unique culture. Create Meaningful Solutions We are trusted partners with our customers and are provided challenging and meaningful requirements to help them solve. Employees who join SimVentions will enjoy additional perks like: Employee Ownership: Work with the best and help build YOUR company! Family focus: Work for a team that recognizes the importance of family time. Culture: Add to our culture of technical excellence and collaboration. Dress code: Business casual, we like to be comfortable while we work. Resources: Excellent facilities, tools, and training opportunities to grow in your field. Open communication: Work in an environment where your voice matters. Corporate Fellowship: Opportunities to participate in company sports teams and employee-led interest groups for personal and professional development. Employee Appreciation: Multiple corporate events throughout the year, including Holiday Events, Company Picnic, Imagineering Day, and more. Founding Partner of the FredNats Baseball team: Equitable distribution of tickets for every home game to be enjoyed by our employee-owners and their families from our private suite. Food: We have a lot of food around here! MWAC -

About the Company SMC is an equal opportunity employer. Employment and promotional opportunities are based upon individual capabilities and qualifications without regard to race, color, religion, gender, pregnancy, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other protected classification as established under federal, state, or local law. About the Role We are looking for a Controls Engineer I to support the design, programming, and development of control systems across a variety of industries. Responsibilities include PLC programming, HMI development, drawing updates, documentation, and status reporting. You will research and analyze ideas for system improvements while meeting safety and quality standards and supporting both internal teams and client needs. Responsibilities Troubleshoot process and hardware issues. Coordinate with internal teams and customers to resolve control system problems. Provide technical support as needed. Work with vendors on controls-related tasks. Meet performance and quality metrics. Perform basic PLC programming. Complete basic to intermediate HMI programming, including coding and object updates. Perform network updates, including IP addressing and VLAN configurations. Integrate equipment using Modbus, BACnet, SNMP, and other protocols. Read and update wiring schematics. Work independently on customer sites or remotely. Travel up to 20 percent, including occasional international travel. Qualifications A.S. or B.S. in Engineering, Computer Science, or a related field (or equivalent experience). Experience: 0-3 years. Required Skills PLC programming experience in Rockwell, Siemens, or Schneider preferred. Experience with AutoCAD. Strong communication skills. Strong analytical and problem-solving abilities. Ability to understand and respond to customer needs. Ability to interpret and implement engineering specifications. Understanding of VLANs and networking. Proficiency with Windows and mac OS. Strong documentation and writing skills. Preferred Skills PLC programming experience in Rockwell, Siemens, or Schneider preferred. Experience with AutoCAD. Strong communication skills. Strong analytical and problem-solving abilities. Ability to understand and respond to customer needs. Ability to interpret and implement engineering specifications. Understanding of VLANs and networking. Proficiency with Windows and mac OS. Strong documentation and writing skills. Equal Opportunity Statement SMC is an equal opportunity employer. Employment and promotional opportunities are based upon individual capabilities and qualifications without regard to race, color, religion, gender, pregnancy, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other protected classification as established under federal, state, or local law.

Education: Bachelor's or Master's degree in Electrical Engineering or a related field. Technical Skills: Proficiency in electrical circuit design, analysis, and simulation software; knowledge of electrical codes and standards; familiarity with CAD tools. Problem-Solving: Strong analytical and critical-thinking abilities to diagnose and resolve engineering challenges. Time Management: Strong organizational skills to manage multiple projects and meet deadlines. Experience: Previous experience in electrical engineering or related roles preferred; hands-on experience with testing equipment and manufacturing processes is a plus.

Experience Level: Mid Level 4+ years Work Authorization/Clearance Requirements: NA We're seeking an exceptional Full Stack Engineer to build and scale our enterprise AI applications. You'll design and implement complete AI-powered features from database to UI, working with cutting-edge LLM technology, RAG systems, and production ML infrastructure. This role combines full-stack development expertise with hands-on AI/ML engineering, deploying intelligent systems that deliver real business value at scale. You'll be a key technical contributor, shipping production-ready AI features that users love while ensuring reliability, performance, and cost-effectiveness. This is an opportunity to work at the intersection of software engineering and artificial intelligence, solving complex problems with modern technology. What You'll Build AI Applications Design end-to-end RAG pipelines for intelligent search and enterprise Q&A Integrate production-grade LLM solutions (GPT-4, Claude, Gemini) Develop prompt strategies, evaluation frameworks, and structured output workflows Build autonomous agents with tool-use capabilities Implement vector search using Pinecone, Weaviate, Chroma, FAISS, or Qdrant Full-Stack Features Build scalable backend services with Python/FastAPI Develop performant UIs in React/Next.js with real-time LLM streaming Design optimized databases across PostgreSQL, MongoDB, Redis Implement WebSockets, event-driven systems, and comprehensive test coverage Production Infrastructure Deploy AI services using Docker & Kubernetes Build CI/CD pipelines for rapid, reliable releases Manage IaC with Terraform on AWS/Azure/GCP Set up monitoring/observability (Datadog, Prometheus, LangSmith, W&B) Ensure security best practices and cost-efficient AI operations Required Experience Full-Stack Development (4+ yrs) Strong Python (FastAPI/Flask) and TypeScript/React/Next.js REST/GraphQL API design, authentication, and security best practices Experience with relational & NoSQL databases Proven delivery of scalable production systems AI/ML Engineering (3+ yrs) Hands-on LLM integration, prompt engineering, and context management Strong experience with RAG (chunking, embeddings, retrieval, generation) Proficiency with vector DBs and semantic/hybrid search Knowledge of AI evaluation frameworks MLOps & Cloud (3+ yrs) Docker, Kubernetes, CI/CD for ML workloads Cloud platforms (AWS/Azure/GCP) and IaC (Terraform/Pulumi) Monitoring, logging, alerting, and cost optimization Engineering Excellence Strong CS fundamentals, problem-solving, debugging TDD, Git workflows, code reviews, clean documentation Comfortable in fast-paced Agile environments Preferred Qualifications Experience with LangChain, LlamaIndex, LangGraph, agent frameworks Exposure to LoRA/QLoRA fine-tuning, multimodal AI, MCP Experience with Kafka/RabbitMQ, graph DBs (Neo4j) Open-source contributions Mentorship, architectural decision-making, cross-team collaboration Tech Stack Exposure (Preferred) Python, Pandas, ML/DL/NLP/GPT-based workflows OpenAI, HuggingFace, Claude, Cohere, Mistral Agentic AI (LangGraph, CrewAI, AutoGen, LangChain Agents) Docker, Kubernetes, Git, CI/CD

Insight Global is seeking Entry Level Electrical Designers to join their client's team in Richmond, VA. This team is responsible for the design of underground and overhead electrical utility construction projects. This is a full time opportunity for anyone looking to jump into their career in this field. We are setting up interviews for this week. Required Skills & Experience 1+ years experience using AutoCAD and GIS Nice to Have Skills & Experience Knowledge of electrical distribution design principles Bachelor's or Associate's Degree Surveying experience

Electrical Design Engineer (PE) Richmond, VA $150,000 - $180,000 + Career Progression to Director + Bonus + Fantastic Benefits (Medical, Dental, Vision) Are you an Electrical Engineer looking to work on exciting municipality projects as part of an incredible family values company who want to progress you into Director levels? This is an excellent opportunity to be the go-to electrical engineer on various technical construction projects, with the chance to progress into a director role within a growing company. This growing company specializes in designing MEP systems for commercial and municipal projects. Due to their long-term expansion plans, they are looking for an Electrical Engineer to serve as a technical expert on diverse projects. They will also push for you to grow within the company towards becoming a shareholder. In this role, you will be based in the office with hybrid opportunities 2 days a week, where you will be responsible for designing construction documents, producing electrical schematics and drawings, handling RFI documents, and liaising with clients and architects to meet project requirements. This is a great opportunity for an electrical engineer who wants work as part of a growing company where they can be an integral shareholder while leading incredible projects. The Role: Serve as the technical expert for Electrical systems design. Design electrical systems, liaise with site staff, and conduct site visits Hybrid Working The Person: Electrical Engineer PE license Knowledge of municipal or commercial projects

As a strong and stable company since 1960, Holder provides nationwide construction management services on complex projects in the aviation, office, technology, education, hospitality, and interiors markets. Our mission is to provide clients with quality construction services, across the country, supported by our offices in Atlanta, Charlotte, Columbus, Dallas, Denver, Phoenix, San Jose and Washington, DC. At Holder, our most valuable resources are our people, who carry forth our core values, brand, and reputation for performance. We are seeking a highly motivated Electrical Design Engineer to join our team in the Herndon or Atlanta that will support Mission Critical construction operations throughout the country. The ideal candidate for this job is a team player who thrives in a challenging and fast-paced yet supported environment. Your job is to do whatever it takes to help the team succeed. Required Experiences And Skills Has experience with the design process and management of complex Mission Critical projects, including processes, teams, and deliverables Understands risks and roles associated with varying project delivery methods Understands principals of contract documents and agreements Takes initiative to identify, track and actively address design and engineering challenges during the design and construction phases of a project. Ability to read construction drawings and specifications with primary experience with electrical and controls. Understanding and able to reference and apply National Electrical Code (NEC) standards and requirements. Ability to proactively articulate design document expectations and assess actual document status by phase (SD, DD, CD) Ability to conduct cross-discipline drawing coordination and design completion/quality reviews specifically for the MEP disciplines. Can contribute constructability, technical expertise and engineering solutions to a project's design evolution Ability to lead and manage the creation of Integrated Electrical Room concepts based on client or projected selected equipment. Ability to manage subcontractors in the completion of integrated design concepts to finalized products ready for manufacturing. Outstanding communication and time management skills Ability to work in a highly-collaborative environment Ability to work with minimal supervision; self-starter Ability to coach and mentor junior associates Manage deadlines, maintain files, and provide reporting to department leadership and/or jobsite leadership Requirements For This Position Include Candidate will preferably have 3-5+ Years in an Engineering position. Excellent verbal and written communication skills - ability to effectively communicate across projects and departments with associates of varying skill level. Also, be able to effectively communicate with third party organizations and consulting entities. Earn the trust of associates but maintain ability to independently assess and evaluate issues. Ability to have difficult conversations, free of emotion. Have a high level of morality and ethics. Proactively adjust priorities based on department, project and company needs and communicate adjustments. Be strategic and solutions/goal oriented and detail-oriented, but flexible to changes in plan. Independent worker with a collaborative mindset. Ability to effectively collect information and ask questions, analyze, evaluate, and make recommendations and then organize the appropriate teams for group decision making. Good listener and detail oriented. Escalate issues timely. Ability to innovate and comfortable being introduced to new technology. Maintains a continuous improvement mindset. Proficient in Microsoft based software including Word, Excel, Outlook, and PowerPoint. Highly organized, detail oriented. Coach and mentor others with meaningful feedback. Open to receiving meaningful feedback. Be open to additional responsibilities as role and department services evolve.

Job Posting Start Date 11-06-2025 Job Posting End Date 01-02-2026 Anord Mardix, a Flex company, is a global leader in critical power solutions. With facilities around the globe, Anord Mardix leads in critical power infrastructure, supporting a myriad of industries, from financial institutions to data centers. We develop skill sets, encourage curiosity, and enable empowerment - we turn jobs into careers. If this sounds interesting, we'd like to meet you. Job Summary Summary: The “Controller” will be based at our site located in Henrico, VA (near Richmond) reporting to the Finance Director. This site is part of our critical power business with tremendous growth. Responsible for the total finance and accounting function of a site(s), this site leader is an integral member of the management team, acting as a critical business partner to the General Manager. They will lead and manage the finance team to ensure accounting and financial processes and procedures are in accordance with corporate and legislative requirements. What a typical day looks like: Maximize financial returns by establishing and overseeing the financial aspects of the assigned site/business segment performance. Proactively drive actions to improve profitability, cashflow and long-term performance. Identify & build business cases for investments, evaluate & mitigates risks, understand foreign exchange and currencies impacts, support quotes & work with customers, drawing on strong business acumen to achieve high site performance. Identify and develop opportunities for process improvements such as finance digitization efforts. Ensure compliance and adherence to corporate policies, local country, and US GAAP, as well as tax, customs, and trade compliance. Oversee the activities of the Accounting and Finance Department for the accurate and timely dissemination of financial management reports including, but not limited to, internal and external monthly financial statements, 12 month rolling forecasts and annual audits. Establish and maintain systems and controls which safeguard company assets by verifying the integrity of all systems, processes, and data, and enhance the Company's value, including complying with the requirements of the Sarbanes Oxley Act. Prepare reports that summarize and forecast company business activity and financial position in areas of income, expenses, and earnings based on past, present, and expected operations. Drive HR Strategies, Talent Development, coaching, mentoring and culture actions to recruit and retain a qualified, motivated & high performing workforce. What we're looking to add to our team: Typically requires a Bachelor's degree in Finance, Accounting, or related field or equivalent experience and training. Master of Business Administration (MBA) is preferred. A background in manufacturing with good understanding of costing. Typically requires a minimum of 10+ years of related experience. SS26 EA42 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryFinance Anord Mardix is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Anord Mardix, you must complete the application process first).

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: NoneTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. We are looking for motivated GNC (Guidance, Navigation, and Control) engineers who want to solve interesting, complex problems, which protect our nation. Our GNC team is designing, building, testing spacecraft subsystems for a mix of DoD, NASA, and commercial customers. We are leaders in innovative solutions to the rapidly growing/evolving fields of space based autonomous rendezvous and docking and rapid design/production of small satellites. Spacecraft GNC analysis engineers will work within the GNC subsystem team and are expected to: Design, analyze, and tune spacecraft attitude and position control loops using time and frequency domain techniques Design, analyze, and tune sequential filters (e.g. Kalman filters) for attitude determination and relative navigation Design, develop, test and verify flight algorithms for the GNC subsystem and support flight software qualification testing Analyze and test the spacecraft GNC subsystem performance using simulations and other analytic tools Perform analysis to support early design phase concept development including actuator sizing and placement, sensor selection and placement, attitude and position guidance, rendezvous, proximity operations and docking analyses, and predicted performance assessments Develop simulation models for sensors (e.g. star tracker, rate gyro, accelerometer, GPS, magnetometer, sun sensors, visible and IR spectrum cameras, LIDAR), actuators (e.g. reaction wheel, torque bar, thruster, CMG), system dynamics (e.g. rigid body, multi-body, orbit mechanics, flexible models, propellant slosh), and the space environment (e.g. atmospheric, solar radiation pressure, third-body gravity, geopotential) Communication is a key element of your role and all GNC engineers are expected to: Apply engineering principles, industry standards, company process, and knowledge of vehicle dynamics, aerodynamics, propulsion, classical/modern control, and estimation theory to perform tasks to advanced program/project goals Document designs, analysis, and test results and create presentation materials Present designs, analysis, and test results to internal and external customers Work well within small- to medium-sized groups The Northrop Grumman Tactical Space Division is a strategic partner specializing in commercial and classified partnerships with the design, delivery, operation and sustainment of satellites and human spacecraft. We support science and space exploration through our various partnerships, including NASA's Artemis program with the goal to return humans to the Moon in 2024 and the TESS (Transiting Exoplanet Survey Satellite) program that has discovered more than twenty confirmed plants. Recognized as an industry leader, we also develop highly specialized space and satellite components. Basic Qualifications for Associate GNC Engineer: A candidate, regardless of age and hiring source, must meet ALL of the below criteria. The candidate must: Be completing or has completed their Bachelor's Degree from an accredited institution. Be majoring in or having majored in an Aerospace Engineering, Mechanical Engineering, Computer Engineering, Electrical Engineering, Physics Be able to obtain and maintain a U.S. Government security clearance (U.S. citizenship is a pre-requisite) Basic Qualifications for GNC Engineer: A candidate, regardless of age and hiring source, must meet ALL of the below criteria. The candidate must: Be completing or has completed their Master's Degree from an accredited institution. Be majoring in or having majored in an Aerospace Engineering, Mechanical Engineering, Computer Engineering, Electrical Engineering, Physics Be able to obtain and maintain a U.S. Government security clearance (U.S. citizenship is a pre-requisite) Preferred Qualifications for both levels: Have an overall cumulative GPA of 3.7 out of 4.0 or higher Campusjobs Associate GNC: 74,000.00 - 111,000.00 Engineer GNC: 89,400.00 - 134,200.00 The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

From a small family business to a multi-billion-dollar global company, Sonoco has been changing the face of products and packaging since 1899 - all while keeping the heart of "People Build Businesses" alive. Our talented people are at the core of our growth, constantly reinventing the Sonoco wheel with brilliant solutions every year. Today we are a world leader in global packaging solutions with diversified operations in over 34 countries. We're extremely proud of our portfolio of brands, our achievements in sustainability and industrialization and the groundbreaking work accomplished by our people. From a small family business to a multi-billion dollar global company, Sonoco has been changing the face of products and packaging since 1899 - all while keeping the heart of "People Build Businesses" alive. Our talented people are at the core of our growth, constantly reinventing the Sonoco wheel with brilliant solutions every year. Today we are a world leader in global packaging solutions with diversified operations in over 34 countries. We're extremely proud of our portfolio of brands, our achievements in sustainability and industrialization and the groundbreaking work accomplished by our people. The Controls Engineer will be responsible for maintaining, upgrading, and optimizing the control and automation systems at Sonoco's Paper Mill. The position will work closely with the maintenance, engineering, and operations teams to continuously improve the safety, reliability and productivity of mill systems and equipment. It has the responsibility to provide day to day technical support, develop strategic plans for system modernization, and lead or participate in project teams involving control system upgrades and installations. What You'll be doing * Acting as project lead for automation and control projects. * Utilizing loop sheets, and electrical elementary diagrams for troubleshoot * Using AutoCad top create loop sheets, and electrical elementaries for small control projects * Tuning and evaluating control loop performance and auditing control system performance - X,Y plots of control loops to find failing control devices * Working with engineers, operations management, maintenance personnel, and contractors to develop and meet scope, budget, and schedule requirements on assigned projects. * Creating documentation packages for bidding, installation, start-up, and maintenance of control system projects. (scope of work, conduit layouts, cable schedules, connection drawings, bill of materials, preventative maintenance procedures, and required spares). * Providing commissioning and startup support for controls projects. * Developing and maintaining a project funnel for automation and control system upgrades. * Working with plant process engineers to optimize control system performance. * Providing direction to the maintenance team on controls related work orders. * Training the maintenance team on new and existing automation and control systems. * Troubleshooting alongside the maintenance team during system upsets. We'd love to hear from you if: * You've graduated from a four-year college or university with a Bachelor of Science degree in electrical, mechanical or chemical engineering. * You've graduated from a two-year college with an associate degree in electrical engineering and relevant field experience. * You have experience with PLC programming including ladder logic, function diagrams, and structured text. Specific experience with Rockwell / Allen Bradley and Siemens is a plus. * You have experience with AC and DC drives. Specific experience with Yaskawa, Siemens and Rockwell is a plus. * You have experience with control system network interfaces and communications protocols. * You have experience with HMI configuration and programming. * You have experience with distributed control systems (DCS) and continuous process controls including field instrumentation and valves. Specific experience with ABB and Foxboro is a plus. * You have experience with control system preventative maintenance including software backups. * Possess Autocad skills to allow the creation of power plans, single lines, control panel layouts, and electrical control diagrams. * You can demonstrate good oral and written communication skills. * You have a proven ability to work in a team environment requiring collaboration with all levels of the organization. * You have experience with Schneider DCS, Voith QCS, and Rockwell Contrologix/CompactLogix PLC's (This could be added to the fourth bullet point) This is a progression position and can be level I- Senior, based on experience. Engineer I: The annual base salary range for this role is from $70,080 - $78,840 Engineer II: The annual base salary range for this role is from $84,640 - $95,220 Engineer III: The annual base salary range for this role is from $102,080 - $114,840 Senior Engineer: The annual base salary range for this role is from $110,160 - $123,930 At Sonoco Products Company, we offer a comprehensive total rewards package, including competitive pay and benefits. *Benefits listed below are for employees located in the U.S. Specific benefits and wellbeing programs may vary depending on your location (within the U.S. or global), or if you are a union employee. Benefits * Medical, dental, and vision coverage for you and your dependents, including FSA and HSA options * 401(k) retirement plan with company match * Wellbeing tools and resources to support holistic health, including an Employee Assistance Program with a variety of services * Paid time off and holidays to recreate, rejuvenate and care for the health of yourself and family * Variety of company paid and voluntary employee-paid insurance plans including life, personal accident, and disability insurance * Tuition reimbursement We are an equal opportunity employer, and we strictly prohibit and do not tolerate discrimination against employees, applicants or any other covered persons because of race, color, religion, national origin or ancestry, sex, pregnancy, sexual orientation, marital status, gender identity or expression, age, disability, genetic information, veteran status, or any legally protected characteristic.

Job Description Controls & Instrumentation Lead WHO WE ARE: Jedson Engineering is an Engineering Consultancy headquartered in Cincinnati, OH. We provide full-service engineering, procurement and construction management services to industrial process manufacturers that operate in pulp & paper, chemical, power & delivery, heavy industrial, consumer product and food & beverage market. We are in a significant growth mode and it's an exciting time to be joining our business! WHAT YOU'LL BE DOING: We're looking for an experienced Controls & Instrumentation Lead to help lead and manage a project scope. This role will work directly with the clients to understand the project needs, and help manage and direct the execution of the engineering deliverables. Manage all discipline aspects of projects from inception through execution Develop and document the scope of work Size and specify instrumentation including pressure and temperature transmitters, flow meters, modulating control valves, regulators, on/off valves, and actuators Create datasheets and work with vendors to get quotes for instrumentation and valves for various applications Coordinate with process engineering team to select the appropriate devices Create schematics, termination drawings, or loop sheets for instrument wiring Design custom control panels to meet the project need Understand project success criteria and ensure client expectations are met Develop and track project costs Identify, document, and communicate changes to scope Identify and effectively respond to clients issues and needs Ensure value is provided to the client and develop & earn their trust Review and manage all project deliverables Coordinate and supervise project implementation, control project costs, monitor progress and quality of the project YOUR IDEAL BACKGROUND: The successful candidate should have an entrepreneurial spirit, and be excited by opportunities to add value to our clients with Jedson's engineering expertise. Strong communication skills, collaboration and courage to challenge the status quo are cornerstones of the Jedson Edge. B.S. degree in Electrical or Mechanical Engineering 10+ years of related experience in project engineering, including EPC or engineering firm experience Experienced Instrumentation engineer on major capital projects from the study phase, detailed design, construction support, check out and start-up. Oversees project execution to ensure completion and client satisfaction Demonstrated experience in driving projects within budget from initiation through a successful and timely conclusion Knowledge of front-end engineering and detailed engineering process Strong interpersonal skills to build and foster positive client relationships Working knowledge of AutoCAD PLC Programming is a plus

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? Our Southeast Property & Buildings business is looking for a Senior Security Video Surveillance & Access Control Design Engineer based in Chantilly, VA or Washington, DC to designing cutting-edge Electronic Security Systems (ESS) that make a real impact. We're looking for a dynamic professional to lead the design and coordination of systems including Access Control (ACS), Video Surveillance (VASS/CCTV), Intrusion Detection (IDS), vehicle barrier controls, and 2-way intercoms. In this role, you'll collaborate with architectural and engineering teams to develop construction drawings, specifications, and cost estimates from conceptual design through construction documents, construction administration, and project closeout. You'll bring creative, project-specific solutions to life while managing multi-discipline projects and engaging with stakeholders across regions. From proposal development to execution, you'll play a key role in delivering high-quality, innovative security solutions that serve our clients and communities locally and globally. Our Hybrid Work Model: Be part of the dynamic culture! Our workplace thrives on a hybrid model, combining in-office collaboration and flexibility. Join us in the office three days a week to contribute, connect and excel in our vibrant environment. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in Needs Assessment: Uncover emerging issues or needs, identifying potential causes, barriers, and key stakeholders, as well as related issues. Solutions Analysis: Identify and evaluate complex, expertise-led solutions against a range of criteria to find the ones that best meet business needs. Improvement/Innovation: Identify shortcomings in existing business practices, then suggest and implement improvements while developing and delivering projects or a work stream within the organization's change management program. Involves working with guidance from senior colleagues. Knowledge Management System: Manage the knowledge management system with guidance from senior colleagues. May involve responsibility for the development or operation of the system. Feasibility Studies: Conduct complex feasibility studies from a technological and organizational perspective and document findings to complete cost-benefit analysis on implementing changes to business processes, products, or business unit structure. Contract Management: Manage a portfolio of contracts and negotiate service-level agreements. Will also plan, coordinate, and supervise activities relating to major contracts. Policy Development and Implementation: Develop procedures and interpret and apply policy for area of expertise to achieve specified outputs, or advise the wider business on application of policy, then monitor implementation of those procedures within the organization. Product and Solution Development: Analyze and evaluate the feasibility and relevance of proposed complex products and services and develop and amend, as necessary, with guidance from senior colleagues. May also be responsible for supervising activities performed by a product development or specialist team. Project Management: Manage a portfolio of projects while reporting to senior colleagues. Client & Customer Management (External): Manage important client relationships with guidance from senior colleagues, or oversee relationship management with a group of more transactional clients and customers. What will you bring to the team? Bachelor's degree in Electrical Engineering or related field; proven equivalent combination of education, skills, knowledge, abilities, and experience will be considered in liue of a Bachelor's degree Ability to work independently in Autodesk Revit required, 5+ Years experience a plus ASIS PSP Required; ASIS CPP a plus Completed the Software House C-Cure 9000 Applications Engineer/Consultant training 10+ years of relevant recent security consulting experience Experience with ATFP and CPTED Expert knowledge of industry leading access control, camera, NVR, video analytics, network, PLC, and intercom systems Strong project management skills, managing discipline specific and multi-disciplinary projects on time and within budget, while exceeding client expectations Working knowledge of state and national building and energy codes and standards a plus Highly developed communication skills, both oral and written, including client facing engagement, working well within team structures, and a proven ability to develop, mentor and collaborate with technical teammates. Federal Government DoD and civilian agencies' project and client experience a plus Understanding of project management software tools; BST experience a plus Networking experience is a plus Limited travel outside of the Washington D.C. area is anticipated, but may be deemed necessary by project #LI-JK1 As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? Our Southeast Property & Buildings business is looking for a Senior Security Video Surveillance & Access Control Design Engineer based in Chantilly, VA or Washington, DC to designing cutting-edge Electronic Security Systems (ESS) that make a real impact. We're looking for a dynamic professional to lead the design and coordination of systems including Access Control (ACS), Video Surveillance (VASS/CCTV), Intrusion Detection (IDS), vehicle barrier controls, and 2-way intercoms. In this role, you'll collaborate with architectural and engineering teams to develop construction drawings, specifications, and cost estimates from conceptual design through construction documents, construction administration, and project closeout. You'll bring creative, project-specific solutions to life while managing multi-discipline projects and engaging with stakeholders across regions. From proposal development to execution, you'll play a key role in delivering high-quality, innovative security solutions that serve our clients and communities locally and globally. Our Hybrid Work Model: Be part of the dynamic culture! Our workplace thrives on a hybrid model, combining in-office collaboration and flexibility. Join us in the office three days a week to contribute, connect and excel in our vibrant environment. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in * Needs Assessment: Uncover emerging issues or needs, identifying potential causes, barriers, and key stakeholders, as well as related issues. * Solutions Analysis: Identify and evaluate complex, expertise-led solutions against a range of criteria to find the ones that best meet business needs. * Improvement/Innovation: Identify shortcomings in existing business practices, then suggest and implement improvements while developing and delivering projects or a work stream within the organization's change management program. Involves working with guidance from senior colleagues. * Knowledge Management System: Manage the knowledge management system with guidance from senior colleagues. May involve responsibility for the development or operation of the system. * Feasibility Studies: Conduct complex feasibility studies from a technological and organizational perspective and document findings to complete cost-benefit analysis on implementing changes to business processes, products, or business unit structure. * Contract Management: Manage a portfolio of contracts and negotiate service-level agreements. Will also plan, coordinate, and supervise activities relating to major contracts. * Policy Development and Implementation: Develop procedures and interpret and apply policy for area of expertise to achieve specified outputs, or advise the wider business on application of policy, then monitor implementation of those procedures within the organization. * Product and Solution Development: Analyze and evaluate the feasibility and relevance of proposed complex products and services and develop and amend, as necessary, with guidance from senior colleagues. May also be responsible for supervising activities performed by a product development or specialist team. * Project Management: Manage a portfolio of projects while reporting to senior colleagues. * Client & Customer Management (External): Manage important client relationships with guidance from senior colleagues, or oversee relationship management with a group of more transactional clients and customers. What will you bring to the team? * Bachelor's degree in Electrical Engineering or related field; proven equivalent combination of education, skills, knowledge, abilities, and experience will be considered in liue of a Bachelor's degree * Ability to work independently in Autodesk Revit required, 5+ Years experience a plus * ASIS PSP Required; ASIS CPP a plus * Completed the Software House C-Cure 9000 Applications Engineer/Consultant training * 10+ years of relevant recent security consulting experience * Experience with ATFP and CPTED * Expert knowledge of industry leading access control, camera, NVR, video analytics, network, PLC, and intercom systems * Strong project management skills, managing discipline specific and multi-disciplinary projects on time and within budget, while exceeding client expectations * Working knowledge of state and national building and energy codes and standards a plus * Highly developed communication skills, both oral and written, including client facing engagement, working well within team structures, and a proven ability to develop, mentor and collaborate with technical teammates. * Federal Government DoD and civilian agencies' project and client experience a plus * Understanding of project management software tools; BST experience a plus * Networking experience is a plus * Limited travel outside of the Washington D.C. area is anticipated, but may be deemed necessary by project #LI-JK1 As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

Job Description Protection & Control Engineer/Technician - Field Testing & Commissioning Travel-Heavy Field Role - Up to 80% Join a leading team supporting high-voltage substation projects across transmission, distribution, and generation environments. We're looking for Protection & Control Field Testing Engineers at all experience levels to perform hands-on testing, commissioning, troubleshooting, and documentation of critical P&C systems. Candidates should expect five 10-hour workdays per week. What You'll Do: Test and commission P&C systems on high-voltage substations (15 kV - 500 kV) Perform protective relay testing (SEL, GE, Basler, Beckwith) with Omicron or Doble test sets Execute CT/PT verification, relay calibration, control scheme testing, and dynamic/static testing Interpret electrical drawings, schematics, and logic diagrams; produce detailed field reports Support Project Leads/Field Supervisors and manage clerical/project documentation What You Bring: 5+ years in substation field testing (breakers, transformers, instrument transformers, P&C systems) Proficiency with relay families: SEL-311L, SEL-387, SEL-487, SEL-421, SEL-351S, GE L90/D60, etc. Experience with NETA, IEEE, NFPA, and related standards Knowledge of test software: ProTesT, Protection Suite, ENOSERV RTS, Omicron Test Universe, AcSELerator Quickset Ability to travel extensively (up to 80%) and lift 50+ lbs Preferred: Bachelor's in Electrical Engineering/Electrical Technology Electromechanical relay testing and high-voltage commissioning experience (CTs, CCVTs, PLC/SCADA, DC systems) IEC 61850 testing and commissioning experience Competitive pay and growth opportunities for skilled P&C engineers. Step into a role where every test, every relay, and every report matters.

JOB TITLE: Controls Engineer - Robotics PAY RATE: Up to $51/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Schedule: Monday-Thursday, 10-hour shifts Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Design and implement robotic automation solutions to improve manufacturing efficiency Program and integrate Fanuc and Epson robots with PLCs and existing production systems Troubleshoot, optimize, and maintain automated systems for maximum uptime and throughput Collaborate with cross-functional teams on process improvements and automation opportunities Create and maintain technical documentation for robotic systems Support machine tending operations and automation of manual stations Drive lean manufacturing and Six Sigma practices across automation efforts Requirements: Bachelor's degree in Mechanical, Electrical, or related Engineering field 5+ years of experience in robotics or automation, preferably in high-volume, low-mix manufacturing 4-6 years of hands-on experience with: PLC programming and controls integration Industrial robotics (Fanuc and Epson highly preferred) Strong knowledge of lean manufacturing, Six Sigma, and SPC methodologies Proven ability to drive efficiency, uptime, and productivity improvements Excellent problem-solving, communication, and team collaboration skills Six Sigma (Green Belt or higher) Lean Manufacturing Statistical Process Control (SPC) Must be a U.S. Person (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today!

Vantive is a vital organ therapy company on a mission to extend lives and expand possibilities for patients and care teams everywhere. For 70 years, our team has driven meaningful innovations in kidney care. As we build on our legacy, we are deepening our commitment to elevating the dialysis experience through digital solutions and advanced services, while looking beyond kidney care and investing in transforming vital organ therapies. Greater flexibility and efficiency in therapy administration for care teams, and longer, fuller lives for patients- that is what Vantive aspires to deliver. We believe Vantive will not only build our leadership in the kidney care space, it will also offer meaningful work to those who join us. At Vantive, you will become part of a community of people who are focused, courageous and don't settle for the mediocre. Each of us is driven to help improve patients' lives worldwide. Join us in advancing our mission to extend lives and expand possibilities. Your role This position is a hands-on oriented engineer responsible for leading concurrent projects of various sizes & types including profit maintenance, VIP, safety, and capacity to meet business objectives. This will also include designing and troubleshooting electrical and/or mechanical systems of industrial automation and be a technical leader supporting the manufacturing process. Your team We are a team of inquisitive individuals who embrace a collaborative environment to take on sophisticated challenges that meet the needs of our patients. We often need to change directions and respond to issues to avoid disruptions in our fast-paced manufacturing environment. Together, we build and maintain a positive work environment. When you join us, you will work with committed individuals who trust each other to deliver on the tasks at hand. We support innovation and out-of-the-box thinking balanced with collaboration across functions and other teams. Our leadership understands the need for continuous education and provides opportunities for further development. What you'll be doing Develops User Requirement Specifications, Technical Specification and Design Specifications for new automated processing equipment or upgrades to existing equipment such as robotic assembly, vision systems, convey systems, tubing extruders, and injection molding equipment Performs process reviews and prepares technical reports detailing equipment operation, best practices and recommended changes Prepares documentation in support of capital projects and manage capital projects. Monitors and reports project costs including capital and cross-functional expenses. Estimates cost affected by design and/or policy changes Leads small project teams as needed to accomplish project objectives Utilize lean principles to reduce waste in the manufacturing process to ensure focus on value-added activities Manages multiple projects at the same time while coordinating efforts with management, engineering, and factory personnel to meet completion dates and minimize production down time Supports testing and validation of manufacturing system from concept thru production Provides on-going support of continuous improvement efforts to support yearly value improvement opportunities Provides support to manufacturing related to safe and efficient daily operations Interfaces with different functional groups and producing appropriate documentation in support of projects Works closely with product development leaders, suppliers and manufacturing to ensure meeting of customer needs and requirements What you'll bring Bachelor of Science in Engineering (Electrical, Controls, Automation preferred) Creative, highly motivated, diligent professional with a positive attitude and passion for engineering and technology Requires little direction, gives guidance to others, works on technical projects, and has sophisticated knowledge within area of functional responsibility Proficient written and verbal communication skills including Microsoft Office Lead and assist electrical or controls issues for equipment to determine root cause, then determine solution and procure vital components to prevent reoccurrence Proficient with PLC programming and control systems design (Examples: Siemens, Allen Bradley, Control Technology Inc (CTI), Automation Direct, Profibus, and Device Net, ACE, V+) developing standard modules and extensive custom code. Good understanding of PID control systems Experience with troubleshooting mechanical issues on equipment and then applying engineering principles for a permanent solution is desired General knowledge of CAD design and ability to use either AutoCAD, SolidWorks or Autodesk Inventor software to create basic conceptual designs Ability to identify and implement process improvements in the infrastructure of existing automated mechanical systems Physical / Safety Requirements Duties may require overtime work, including nights and weekends Use of hands and fingers to manipulate office equipment is required Position requires standing and walking for extended periods of time Requires lifting up to 50 lbs. This is a safety sensitive position for the purposes of the Arkansas Medical Marijuana Amendment. We understand compensation is an important factor as you consider the next step in your career. At Vantive, we are committed to equitable pay for all employees, and we strive to be more transparent with our pay practices. The estimated base salary for this position is $72,000 - $108,000 annually. The estimated range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on upon location, skills and expertise, experience, and other relevant factors. This position may also be eligible for discretionary bonuses, commission, and/or long-term incentive. For questions about this, our pay philosophy, and available benefits, please speak to the recruiter if you decide to apply and are selected for an interview. Advanced Molding and Extrusion techniques (Learning / Doing (1)), Automation, reliability & smart manufacturing (Learning / Doing (1)), Critical Systems (Learning / Doing (1)), Data Analysis & Analytics (Applying / Overseeing (2)), Digitalization & Systems Engineering (Learning / Doing (1)), First Principles Thinking (Applying / Overseeing (2)), Lean & six sigma process knowledge (Applying / Overseeing (2)), Machine Learning & Artificial Intelligence (Not Applicable (0)), Manufacturing & Process Knowledge (Applying / Overseeing (2)), Modeling & Simulation (Leading / Driving (4)), Operational Quality Assurance (Learning / Doing (1)), Process Automation (Applying / Overseeing (2)), Product / Project Management (Applying / Overseeing (2)), Smart Operations / Industry 4.0 (Learning / Doing (1)), Software Integration (API, Data Pipelines) (Not Applicable (0)) US Benefits at Vantive This is where your well-being matters. Vantive offers comprehensive compensation and benefits packages for eligible roles. Our health and well-being benefits include medical, dental and vision coverage that start on day one, as well as insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance. Financial and retirement benefits include the Aon Pooled Employer Plan (“Aon PEP”), Vantive's 401(k) retirement savings plan, to help you prepare for your future. The Aon PEP is designed to help improve retirement outcomes by providing retirement resources more efficiently. The plan offers a robust set of investment options, financial education, and a suite of resources to support your retirement goals. We also offer Flexible Spending Accounts, educational assistance programs, and time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave. Additional benefits include commuting benefits, the Employee Discount Program, the Employee Assistance Program (EAP), and childcare benefits. Join us and enjoy the competitive compensation and benefits we offer to our employees. For additional information regarding Vantive's US Benefits, please speak with your recruiter or visit our Benefits site: Benefits | Vantive Equal Employment Opportunity Vantive is an equal opportunity employer. Vantive evaluates qualified applicants without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, protected veteran status, disability/handicap status or any other legally protected characteristic. Know Your Rights: Workplace Discrimination is Illegal Reasonable Accommodation Vantive is committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please click on the link here and let us know the nature of your request along with your contact information. Form Link Recruitment Fraud Notice Vantive has discovered incidents of employment scams, where fraudulent parties pose as Vantive employees, recruiters, or other agents, and engage with online job seekers in an attempt to steal personal and/or financial information. To learn how you can protect yourself, review our Recruitment Fraud Notice.