Controls technician entry level jobs

The Control Box Technician is responsible for performing a variety of operations to assemble unit complete, including sub-assembly, final assembly and troubleshooting while observing safety and housekeeping procedures. This position starts out at $19.38 an hour and follows quality management system procedures including quality checks and in-process inspection procedures as required. **Making multiple wire connections using correct Tork tool for specific and dedicated connections** **Must be able to work from customer orders, written procedures, prints, specifications, diagrams, work orders, process sheets, written and verbal instructions** **Diagnose, troubleshoot and check mechanisms** **Make adjustments and corrections and/or repair in-progress** **Usage of basic hand and power tools and fixtures** **Reads process sheets, blueprints, and work instructions to determine methods and sequence of assembly operations** **Works within a team environment to execute weekly production schedules that are measured for productivity** **Perform responsibilities and tasks following quality and safety practices and procedures** **Accepts responsibility for all housekeeping protocols and reporting any inventory concerns to supervisor** **Adhere to all plant rules and maintain proper attendance standards according to company policy** **Work and communicate well with others in a cross-functional team environment** **Minimum Qualifications:** + High School diploma or GED preferred + Demonstrated attention to detail, meticulous + Previous assembly experience preferred + Previous experience working in a manufacturing environment preferred + Ability to use hand and power tools, safely and efficiently + Ability to utilize material lifting devices + Demonstrate basic proficiency in reading and understanding blueprints and instructions to perform assembly in proper order and sequence + Ability to physically perform (stand, pivot, lean, stoop, lift up to 35 pounds) as required + Prolonged periods of standing/sitting and performing repetitive tasks + Periods of working in hot/cold manufacturing environment **Compensation Information:** Starting pay $19.38/hour. Tops out at $24.22/hour after 6 months. _ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential._ _As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship._ _All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws._

Job Posting Start Date 12-15-2025 Job Posting End Date 12-31-2025 Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world. A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary. Job Summary Perform scheduled preventive maintenance actions on all subsystems and related components * Ensure preventative maintenance of robotic and process support equipment are completed on a regularly scheduled basis. * • Collaborate with the automation team in the qualification process of automated systems. Records procedures and results, numerical and graphical data, and recommendations for changes in product or method. * • Records times and problems in equipment logs. * Proper use of power tools and measuring equipment Through troubleshooting, identifies machine malfunctions and isolates the failure mechanism. * • Repairs the failure mechanism in the most cost-effective manner. * Performs preventive maintenance at specified intervals and schedules. * Provides daily equipment functioning activity information. * Aligns, repairs, replaces, and balances component parts and circuitry. Assists engineers in formulating test, calibration, repair and evaluation plans and procedures to maintain precision accuracy of measuring, recording, and indicating instruments and equipment. * Strong awareness of safety Qualifications Qualifications from Job Profile Education: High School () Experience Level: Manufacturing Operations - Other (00. Entry (0 - 2 years of experience)) Reading Diagrams SK09 What you'll receive for the great work you provide: * Full range of medical, dental, and vision plans * Life Insurance * Short-term and Long-term Disability * Matching 401(k) Contributions * Vacation and Paid Sick Time * Tuition Reimbursement Job Category Production Engineering Relocation: Not eligible Is Sponsorship Available? No Optional Skills: Allen Bradley PLC, Corrective Maintenance, Electric Motors, FANUC Robotics, Omron PLC, Power Drivers, Preventive Maintenance, Reading Diagrams, Robot ABB, Servo Motors Flex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Performance Health is looking for a 1st Shift Electrical Maintenance Technician to join our production team in Akron, OH. The Electrical Maintenance Technician is responsible for the installation, maintenance, troubleshooting, and repair of electrical systems, equipment, and machinery in a manufacturing or industrial setting. The technician ensures all electrical components and systems operate efficiently and comply with safety regulations and company standards. This onsite position will be working 1st shift daytime hours, Monday through Friday. Essential Job Duties & Responsibilities * Perform routine maintenance and inspections on electrical systems, control panels, and industrial equipment. * Diagnose and repair electrical faults in machinery and equipment. * Install, test, and commission new electrical systems and components. * Maintain and update electrical schematics, blueprints, and documentation. * Work with PLCs, VFDs, motors, relays, and other control systems. * Ensure compliance with electrical codes, safety regulations, and company procedures. * Collaborate with engineers and other maintenance staff to improve equipment reliability. * Respond promptly to breakdowns and emergencies to minimize downtime. * Monitor and record maintenance activities using CMMS * Performs other duties as assigned. Job Qualifications * Diploma or Technical Certificate in Electrical Engineering or related field. * Proven experience as an Electrical Technician, preferably in an industrial or manufacturing environment. * Strong knowledge of electrical systems, schematics, and troubleshooting techniques. * Familiarity with PLCs (Siemens, Allen Bradley, etc.), VFDs, and industrial automation. * Ability to read and interpret electrical drawings and blueprints. * Good understanding of safety practices and electrical codes (e.g., NEC, IEC). * Basic mechanical skills are a plus. * Excellent problem-solving and communication skills. Benefits * Our benefits include healthcare; insurance benefits; retirement programs; paid time off plans; family and parenting leaves; wellness programs; discount purchase programs. * This is a full-time position with an hourly pay rate of $30.00 - $40.00 and the opportunity to earn bonus, plus benefits. To perform this job successfully, an individual must be able to perform each essential job duties satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performance Health is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, and any other characteristic protected by law.

The Automation & Controls Technician I is responsible for designing, developing, and maintaining automated systems and processes within the organization that meet design, performance, and safety specifications as well as comply with safety standards and regulations. The role involves a combination of technical expertise, problem-solving skills, and collaboration with cross- functional teams. The Automation & Controls Technician I plays a crucial role in the design, implementation, and maintenance of automated systems, contributing to increased efficiency, reliability, and safety within industrial processes. Reporting Structure: Sr. Project Manager, Project Managers, Engineers Position Responsibilities: Develop and implement Programmable Logic Controller (PLC) programs to control machinery and processes. Design and develop Human Machine Interface (HMI) and Supervisory Control and Data Acquisition (SCADA) systems for monitoring and control. Calibrate and configure instrumentation devices such as sensors, transmitters, and actuators. Set up and configure communication networks for efficient data exchange between control devices. Identify and resolve issues related to automation and control systems. Conduct diagnostics to pinpoint faults and implement corrective actions. Upgrade existing automation systems to improve performance or accommodate changes in requirements. Modify control system configurations as needed. Work closely with Automation & Controls Engineers to understand system requirements and design specifications. Maintain accurate and up-to-date documentation for control systems, including drawings, schematics, and manuals. Conduct quality control checks on implemented automation solutions to ensure they meet design specifications. Offer technical support and troubleshooting assistance to end-users. Assist in the commissioning of automation systems, including hardware and software components on-site. Other Responsibilities: Stay updated on advancements in automation and control technologies. Evaluate and recommend the adoption of new technologies that can enhance system performance. Participate in training programs to enhance skills in programming software and automation/control systems. Provide training to operations and maintenance personnel on the use and maintenance of control systems. Qualifications: Education and Experience: High School Diploma or GED required. 2-year engineering degree preferred. Experience in technical roles preferred. ISA Certified Automation Professional (CAP) certification is preferred. Required Skills: Basic understanding of electrical circuits, PLC programming and HMI systems. Basic troubleshooting skills. Ability to work independently and in a collaborative, team environment. Ability to utilize critical thinking methodologies to solve problems. Microsoft Office Applications: Proficiency in Word, Excel, PowerPoint, Outlook, and Teams. File Management. Preferred Skills: Programmable Logic Controller (PLC) software: Proficiency in RSLogix, Logix5000, EcoStruxure Control Expert, Crimson, and/or ProSoft. Human Machine Interface (HMI) software: Proficiency in FactoryTalk, Wonderware, Vijeo Designer, and/or Citect. Physical Requirements: The physical demands described here are representative of those that must be met by an Employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the Employee is regularly required to talk and hear. The Employee frequently is required to stand, walk, and sit; use hands to finger, handle or feel; reach with hands and arms. The Employee must frequently lift and/or move up to ten (10) pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The ability to work overtime, 10 to 20 hours per week when workload is necessary, is required. Some domestic travel may be required.

Job Description Join Greif: Where your ideas power progress Make an immediate impact in a great working environment that values initiative and welcomes your ideas. As an Electrical Maintenance Technician, you'll maintain, troubleshoot, and repair industrial electrical systems that keep production moving. Key responsibilities Perform general repairs to industrial electrical systems and equipment. Conduct routine maintenance and correct faulty wiring to prevent downtime. Troubleshoot equipment to determine malfunctions in systems or components; restore operation efficiently. Install, maintain, and repair industrial control systems and power distribution systems. Work with electric motors, motor control devices, and variable-speed (VFD) drives. Repair electrical systems, wiring, and circuit breakers. Diagnose and repair substation breakers and motor control centers (MCCs). Read and correctly interpret technical documents and schematics to execute assignments. Technologies you'll leverage PLC diagnostics and controls AC & DC motors Variable Frequency Drives (VFDs) Motor control circuits Impact and expectations Use electrical/electronic skills to achieve machine uptime metrics. Effectively troubleshoot and resolve issues to stabilize production. Communicate information clearly in both verbal and written form. Development Attend company-sponsored training. Seek out additional training to continually expand your capabilities. At Greif, you'll work in an environment built for problem solvers who want to grow.

Gregory Industries, a longstanding and growing Canton company, has an outstanding opportunity for an Electrical Maintenance Technician* experienced in a manufacturing environment.* Experience in electrical, mechanical, hydraulics and pneumatics is preferred. The ability to troubleshoot and repair 480 volt, 3 phase and control circuits, DC crane control knowledge, read electrical schematics as well as light welding and burning experience is a plus. We offer an excellent wage/benefit package, and a tobacco-free, drug-free, safe working environment. Benefits offered include, but are not limited to: Paid Time Off and paid holidays 401k company match Medical, dental & vision benefits Company paid life insurance, short term disability & long-term disability Paid shift differential Company provided uniforms Onsite fitness facilities Discretionary profit-sharing bonus program Qualified candidates are invited to complete an online application through the link below. Please answer all questions/fields on the application for consideration of employment. Gregory Industries is an Equal Employment Opportunity employer.

Adrian Steel is committed to providing the best cargo management solutions in North America. Because of this, we take our customer service to the next level. Since our beginning in 1953, our Adrian, Michigan, corporate office and manufacturing facility now encompass a 166,900 square ft. facility. We have up fitted over one million vehicles and counting! It's a fact that an organized vehicle increases workflow efficiency and reduces inventory damages. *We are recognized as a National Truck Equipment Association MVP. We specialize in van storage solutions and accessories for all trades, including HVAC, Plumbing, Electrical, Building, Auto Glass, Painting, Locksmith, Parcel Delivery, and Cable/Satellite contractors to name a few. We pride ourselves on respect, contribution, stability, and compensation to foster a long-lasting relationship that puts Adrian Steel on the market as an employer of choice. As a premier employer, our employees are offered a robust benefits package that is constantly benchmarked to ensure we can attract and retain top talent. We value the dedication and innovation of all employees; we promote daily collaboration to ensure we are providing employees the opportunity to share ideas that will provide the best solutions and products for our customers. Our goal is to partner with self-motivated and driven individuals and foster a relationship of continuous improvement, while keeping our Mission Statement front and center; “Doing it right the first time, always improving.” We are currently seeking an Automotive Electric Technician at our Commercial Van Interiors (CVI) location in Toledo, OH. A successful candidate will be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Assemble and Install customer solutions into commercial vehicles, trailers, box trucks, etc… Receive, stock and pull inventory Drive a lift truck Deliver and pick up commercial vehicles from customer or dealerships Move vehicles around facility and in and out of bays Provide Daily Feedback on Performance Ability to follow workflow processes Function effectively in a team environment Flexible with work schedule to support customer commitment Ability to meet deadlines of individual or team production tasks during shift Performing other tasks as assigned The key behaviors required for this role are: Knowledge of commercial product Identify and communicate risk immediately Ability to work with tools, hand cart and lift up to 50lbs; ability to obtain a fork lift license Identify and eliminate waste to improve productivity Results oriented; Exceeds goals and pushes self and team Education / skills required for this role: High school diploma or GED preferred Must meet and maintain all requirements to be a “Driver” as defined in Adrian Steel Fleet Corporate Driving Policy Certified Fork lift driver - Will support obtainment if needed Additional Requirements: Must meet and maintain all requirements to be a “Driver” as defined in Adrian Steel Fleet Corporate Driving Policy Valid driver's license Acceptable driving record (Adrian Steel authorized) Benefits Offered: 401K Medical / Health Savings Account Dental Employee Assistance Teladoc Group Life Short / Long Term Disability Health & Wellness Programs Vision Voluntary Benefits include Critical Illness, Accident Insurance, and Hospital Indemnity Paid Time Off Paid Holidays We are committed to fostering a safe work environment-one that celebrates diversity, offers equal opportunities and where all employees feel secure, involved, valued, and respected. We do not tolerate discrimination, unlawful harassment, hate-related behavior, or threats of workplace violence.

Passionate, driven people dedicated to making a difference in health care. Are you looking for an opportunity to get into the growing health care field? Look no further, we will train you! SpecialtyCare provides a comprehensive in-house training program that will help you gain valuable skills and a career in health care. We are looking for individuals that have excellent customer service skills that enjoy working in a fast-paced environment. SpecialtyCare is the nation's leading provider of outsourced clinical services. SpecialtyCare continues to grow and we'd like you to grow with us. Our clinicians and technicians participate in over 350,000 surgeries each year in 45 states, the District of Columbia, and Puerto Rico. We serve more than 1,000 hospitals and support more than 13,000 surgeons. We are always interested in building our team by hiring and training smart, dedicated people who share our values and our commitment to excellence. Join us as an Instrument Technician in Minimally Invasive Surgical Support working in the fast-paced Operating Room (OR). As an Instrument Technician you will be trained to positively impact the efficiency of the OR by: * Decontaminate soiled instrumentation, cameras, scopes and other materials/instrumentation as needed. * Prep and pack decontaminated items for sterilization. * Managing the maintenance, care, cleaning and repair of our instrument/scope sets in a hands-on environment. This role does not have direct patient contact/direct patient care. Requirements * Associate or bachelor's degree preferred. * Must live within 30 minutes of our contracted hospitals, able to work flexible hours and participate in a call rotation including weekends/holidays. * Reliable transportation and the ability to be on-call. * Must be able to successfully complete on the job training including certification and company sponsored education modules. The Successful Candidate The successful candidate must bring a high level of ethical, intellectual, professional and personal values that complement the team and company vision. The following competencies are highly valued: * Works well in a fast-paced environment and with a sense of urgency. * Is dedicated to consistently delivering excellent customer service. * Excellent communication skills and basic computer skills. * Ability to adapt and thrive in a high stress environment. * Proven self-starter who works well both independently and in a team. * Lives the SpecialtyCare Values - Integrity, Care, Urgency, and Improvement. Benefits SpecialtyCare is committed to supporting professional growth for our associates. Each associate is allocated funds for continuing education, membership fees, and dues for professional associations. We also provide tuition reimbursement or tuition repayment assistance. We provide a full benefits package including a matching 401K and generous PTO plan. We also cover the cost of maintaining certification. SpecialtyCare is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. SC MISS

Company: RHI Magnesita Starting Pay: $26.00 - $29.00 per hour Job Type: Full-time Shifts: Must be open to all shifts (day, night, weekends as needed RHI Magnesita is seeking a skilled and dependable Electrical Multicraft Maintenance Technician to support our manufacturing operations in East Canton, OH. This role is responsible for maintaining and repairing industrial machinery, electrical systems, and mechanical components to ensure optimal plant performance What You'll Do * Install and maintain electrical power supply wiring and conduit for equipment such as presses, conveyors, mixers, and air handlers. * Troubleshoot and repair mechanical, electrical, hydraulic, and pneumatic systems. * Rebuild pumps, gearboxes, and other industrial components. * Operate forklifts, cranes, scissor lifts, boom lifts, and skid steers. * Read and interpret blueprints and electrical schematics. * Perform welding tasks (preferred but not required). * Climb ladders and work in confined spaces as needed. * Carry tools and materials to workstations regularly. * Follow all safety protocols and procedures at all times. * Respond to emergency maintenance needs during off-hours when necessary. What You Bring * Strong mechanical aptitude and attention to detail. * Ability to lift up to 50 lbs regularly. * Proficient in troubleshooting electrical and mechanical issues. * Ability to complete electrical work in compliance with code. * Welding experience is a plus. What We Offer * Competitive hourly wage ($26-$29/hr) * Full benefits package including: * Medical, Dental, and Vision Insurance * 401(k) Retirement Plan * Life Insuranc About RHI Magnesita RHI Magnesita is the leading global supplier of high-grade refractory products, systems and solutions which are critical for high-temperature processes in a wide range of industries. Serving customers around the world, RHI Magnesita has more than 20,000 employees in 65 main production sites (including raw material sites), 12 recycling facilities and more than 70 sales offices. RHI Magnesita's team in North America helps build refractory products that solve the most extreme manufacturing challenges. From advanced lithium-ion batteries for laptops and EVs and specialized glass on smartphones and tablets, to the steel and cement that build the world around us, our high-performance bricks and linings make it possible to melt, bend, shape, and refine these materials at extreme temperatures. With a vertically integrated value chain, RHI Magnesita has helped forge the materials that build industries and economies for almost 200 years. Refractory products are essential to the production processes for cement, steel, aluminum, and many other industrial producers in the region. Come get fired up with our North American team! North America | RHI Magnesita Nearest Major Market: Canton Nearest Secondary Market: Akron

Purpose Performs a wide range of basic landscaping, maintenance and resources management activities in along the Olentangy Greenway Trail as part of the Olentangy Reemployment Plan. The Olentangy Reemployment Plan is an 8 week program in partnership with the Columbus Recreation and Parks Department. Example of Duties Performs a variety of landscaping, maintenance and resource management duties including, but not limited to mowing, invasive species removal, trail maintenance, fertilizing, trimming, mulching, etc. Picks up litter and empties trash receptacles. Performs basic trail maintenance including clearing paths, trimming, and pruning using pruners, shovels, rakes, hand saws, hand axes, etc. Operates basic construction equipment including but not limited to power tools, line trimmers, mowers, chain saws, skid steers, etc. Plant, fertilize, prune, water and transplant trees. Assist in the basic construction and repair of decks, signs, tables, roadways, etc. Paints and stains. Qualifications Education/Experience Must be at least 18 years of age. Due to the temporary nature of these roles, local applicants are preferred. Must successfully complete a backround check. Language Skills Ability to communicate effectively and courteously with coworkers and general public on a daily basis. Team-Oriented Works on a team. Good customer service, communications and interpersonal skills. Attendance Being present at work is an essential function of the position. Mathematical Skills Basic mathematics skills; ability to add, subtract, multiply and divide whole numbers, fractions, decimals. Reasoning Ability Ability to carry out instructions and deal with problems involving few variables within a familiar context. Ability to work with a minimum amount of supervision. Physical Demands While performing the duties of this job, the employee is regularly required to walk, talk and hear, operate grounds maintenance and heavy equipment, lift heavy objects, operate power and hand tools, drive off-road vehicles, etc. The employee is frequently required to stand; use hands to fingers, handle, or feel objects, tools, or controls, and reach with hands and arms, etc. The employee is occasionally required to sit, climb or balance, and stoop, kneel, crouch, or crawl. Work Environment While performing the regular duties of the job, the employee regularly works in outside weather conditions. The employee frequently works near moving mechanical parts. The noise level in the work environment is usually moderate. Work Hours Schedule is typically Monday through Friday, 40 hours per week, with some possible Saturday shifts during the 8 week program. Any Additional Information Ability and willingness to cooperate with coworkers on group projects. Ability to complete routine forms. Other Information The above Description represents the essential and most significant duties of this position. It is not intended to exclude other work duties, assignments and responsibilities not mentioned herein. For more information about the Olentangy Reemployment Plan please contact: Joshua J. Simon

Are you a skilled, detail oriented Firestopping Technician seeking a new opportunity? Join our team, where you'll tackle tasks such as: installing firestopping products according to work orders, manufacturer, quality, and safety guidelines. This position reports to the foreman. Contribute your expertise and be a key player on our team, APPLY TODAY! Responsibilities Duties: • Install Firestopping at construction sites • Willing to be multi-disciplined (exterior caulking, below grade waterproofing, Intumescent spray) • Perform any other construction related duties as requested or assigned by Foreman. Additional Responsibilities: • Conform to all company policies, procedures etc. (Ex. New hire sign off - safety manual, etc.) • Promote teamwork and positive communication among employees. Skills and Abilities: • Reliable transportation, work area can be Dayton, Cincinnati, and Columbus. • Effectively communicate verbally with co-workers • Effectively manage one's time and deal with problems that arise • Able to attend to job duties on a consistent & timely basis. Qualifications Education and Experience: High School Diploma, or GED preferred. Prior FireStop experience a plus but not required Additional Requirements: Pass a pre-employment drug test Have reliable transportation Working Conditions: Work is often performed outside under any type of weather conditions. Exposure to varying degrees/amounts of heat, cold, dust, dampness, ice, precipitation and mud. Physical Demands: Must be able to: Climb and maintain balance on scaffolds and ladders; use arms and hands to reach for, handle and manipulate objects and materials; lift and carry objects up to 50 pounds repetitively to meet the physical demands of our industry. Stand or walk, stoop, kneel, crouch and crawl for long periods of time. Must have acceptable vision (either naturally or with correction). Benefits: Danis offers a competitive salary, merit increases, bonus, medical, dental and vision insurances, life insurance, short-term disability, long-term disability, 401(k), profit sharing, boot vouchers, prescription safety glasses and more. EEO Statement Danis is an Equal Opportunity Employer. Danis does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit and business need.

The University of Rio Grande/Rio Grande Community College is seeking a qualified HVAC Technician. This full-time non-exempt (hourly) position is offered with a comprehensive benefit package including health insurance, retirement, life and disability insurance, paid leave, educational benefits, and all other benefits associated with full-time employment. The posiiton is available immediately. JOB SUMMARY: Under general supervision, this position is responsible for providing a variety of skilled work related to the maintenance and repair of heating, ventilating and air conditioning (HVAC) systems. Technical Skills Test electrical circuits or components for continuity, using electrical test equipment. Comply with all applicable standards, policies, or procedures, such as safety procedures or the maintenance of a clean work area. Study blueprints, design specifications, or manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components. Discuss heating or cooling system malfunctions with users to isolate problems or to verify that repairs corrected malfunctions. Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters. Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions. Install, connect, or adjust thermostats, humidistats, or timers. Repair or replace defective equipment, components, or wiring. Install auxiliary components to heating or cooling equipment, such as expansion or discharge valves, air ducts, pipes, blowers, dampers, and flues. Braze or solder parts to repair defective joints and leaks. Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools. Perform mechanical overhauls and refrigerant reclaiming. Install expansion and control valves, using acetylene torches and wrenches. Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools. Record and report time, materials, faults, deficiencies, or other unusual occurrences on work orders. Keep records of repairs and replacements made and causes of malfunctions. Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills. Estimate, order, pick up, deliver, and install materials and supplies needed to maintain equipment in good working condition. Install or repair air purification systems, such as specialized filters or ultraviolet (UV) light purification systems. Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, and refilling non-toxic refrigerants. Test pipes, lines, components, and connections for leaks. Perform other general maintenance duties as assigned. Technology Skills Facilities management software - Computerized maintenance management system (FMX) CMMS; BAS software Take pictures and be able to upload or attach to emails and Work Orders Microsoft Excel Microsoft Word Microsoft Outlook Work Activities Schedules, performs and/or supervises preventative maintenance procedures on all pneumatic, electric, electronic/DDC HVAC control systems for campus buildings. Troubleshoots HVAC control malfunctions, determines appropriate repair requirements and performs or supervises the accomplishment of repairs. Locates and procures components required for building HVAC control system maintenance and repair. Reviews design drawings and specifications of a new building HVAC controls and inspects contract installations to assure proper operation. Performs maintenance and repair work for all aspects of HVAC equipment, including, boilers, chillers, pumps and fan systems. Maintains the integrity of the control system and their components documented through the preventative maintenance program. Completes and closes out work orders in the CMMS, enters time worked and materials used. Tracks all work and time in CMMS. Maintains sensors, thermostats, controllers, valves, actuators, and other HVAC control related equipment. Completes filter changes, coil cleaning, grease bearing equipment. Installs basic wiring and controls. Works with supervisor and outside mechanical engineers to insure either new or retrofitted equipment is installed correctly and ties back to the control system. Maintains system backups and records. Works to implement energy conservation measures. Performs other duties as assigned to Maintenance Technicians and/or by supervisor or other appropriate administrators. Performing General Physical Activities - Performing general physical activities includes doing activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling materials. Inspecting Equipment, Structures, or Materials - Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects. Making Decisions and Solving Problems - Analyzing information and evaluating results to choose the best solution and solve problems. Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things. Updating and Using Relevant Knowledge - Keeping up-to-date technically and applying new knowledge to your job. Evaluating Information to Determine Compliance with Standards - Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards. Operating Vehicles, Mechanized Devices, or Equipment - Running, maneuvering, navigating, or driving vehicles or mechanized equipment, such as forklifts, trucks, and tractors. Communicating with Supervisors, Peers, or Subordinates - Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person. Repairing and Maintaining Mechanical Equipment - Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles. Establishing and Maintaining Interpersonal Relationships - Developing constructive and cooperative working relationships with others, and maintaining them over time. Training and Teaching Others - Identifying the educational needs of others and teaching or instructing others as needed Organizing, Planning, and Prioritizing Work - Developing specific goals and plans to prioritize, organize, and accomplish your work. Aid in Developing Others - Identifying the developmental needs of others and mentoring, or otherwise helping others to improve their knowledge or skills. Guiding, Directing, and Motivating Subordinates - Providing guidance and direction to subordinates, including setting performance standards and monitoring performance. Coordinating the Work and Activities of Others - Getting members of a group to work together to accomplish tasks. Interpreting the Meaning of Information for Others - Translating or explaining what information means and how it can be used. Scheduling Work and Activities - Scheduling events, programs, and activities, as well as the work of other technicians to assist in maintenance of equipment assigned to their buildings. Repairing and Maintaining Electronic Equipment - Servicing, repairing, calibrating, regulating, fine-tuning, or testing machines, devices, and equipment that operate primarily on the basis of electrical or electronic (not mechanical) principles. Documenting/Recording Information - Entering, transcribing, recording, storing, or maintaining information in written or electronic form. Travel to work sites to perform installation, repair or maintenance work. MINIMUM QUALIFICATIONS: High school diploma or equivalent HVAC Certifications or License 1 to 2 years related work or education experience Possess strong background on boilers, chillers, heating, ventilation and air conditioning systems, with both electronic and pneumatic controls Demonstrated knowledge of electric controls/DDC's Strong computer literacy skills Demonstrated ability to identify problem or future issues with HVAC equipment Possess knowledge of three-phase electrical systems and multi-meter skills Understanding of building envelope science including: thermal mass, condensation, environmental growth, ventilation Willing to be available and work flexible hours for weather related and emergency needs (i.e. early call in, weekend call in and after hours call back). Must possess a valid Driver's License and have a good driving record. Willing to use personal vehicle to perform maintenance tasks on campus. Willing to participate in special training classes as required. Must possess good communications skills to establish and maintain effective working relationships with supervisors, co- workers, campus community, and public. PREFERRED QUALIFICATIONS: Experience with Building Automation Systems Mechanical experience with belts, valves, pulleys, motors, fans, dampers, and actuators PHYSICAL QUALIFICATIONS: Must be willing and able to work outdoors with exposure to extreme heat and cold temperatures/weather Manual dexterity sufficient to use hand tools and equipment Must be able to lift up to 50 regularly Must be able to stand, crouch, and climb to use ladders and perform various types of physical labor. Must know how to operate mowers, chain saw, power hedge trimmers, and power leaf removal equipment. APPLICATION INSTRUCTIONS: For full consideration, applicants must submit a resume, cover letter, and the names and contact information of at least three references to David Brodeaur, Director of Facilities, Maintenance, and Grounds, through the University's online application portal. Review of applications will begin immediately and will be accepted until the positions are filled. Background check required prior to hire. For additional information about the University, please visit: ************

This position resides on the EDI Application Tech team which provides second-level support for EDI's clients and call center as well and scripting claim data transformations via a proprietary scripting language to ensure claims meet all payer requirements. Responsibilities Script medical billing converts and edits via proprietary scripting language in order to ensure claims meet all payer requirements. Provide second-level software support for EDI clients and staff. Research network issues, program errors, and Windows errors relating to Xpeditor Server performance. Assist with the testing of Xpeditor enhancements and bug fixes that are part of Xpeditor releases. Map client claim files in order to load into Xpeditor. Establish custom edits/converts using Xpressbiller software. Modify Xpeditor Reports per client requests. Assist with identifying product shortcomings and possible enhancements. Other duties as assigned. Qualifications Associate's degree preferred Experience with some sort of scripting language required Knowledge of EDI a plus Problem solving skills Strong computer skills Excellent verbal and written communication skills Ability to work in a fast paced environment Strong attention to detail - working with clients and internal departments Ability to set priorities Ability to maintain confidentiality

Are you tired of technician or maintenance jobs that don't offer you the career growth you are looking for? Do you want a job that offers more stability than turnaround work? Would you want to learn a skilled trade in the oil and gas industry? How about a new career with a company offering training, opportunities to advance, and the potential for multiple pay increases in your first year? Apply for our Entry Level position with Alliance! As a Monitoring Technician, you will work in a rapidly growing industry protecting the environment and have the opportunity to learn and advance within our rapidly growing company. We offer a starting pay rate of $19.50/hr with a clear career path for upward mobility, paid time off, great benefits, and quarterly profit-sharing bonuses. Apply now! During our comprehensive training process, you will learn the following responsibilities for the Entry Level Monitoring Technician (LDAR) position which are located onsite at our client sites: Daily monitoring of components to detect leaking equipment (valves, pumps, connectors, etc.) which can be a source of emissions and volatile hazardous air pollutants Perform and record calibrations on analyzers before use Perform preventative maintenance and troubleshooting on analyzers Identify and report changes to components while performing monitoring Identify and report new or removed components while performing monitoring Identify and report Audio Visual Olfactory (AVO) leaks, Open-Ended Lines (OEL) Identify and report components with missing identification tags Support leak repair activities at customer work sites as required Complete Job Hazard Analysis (JHA) daily Complete Equipment and Vehicle Inspections as required Complete daily paperwork (job summary, component change forms, missing tags, etc) Attend and participate in daily toolbox meetings and scheduled safety meetings Complete all safety and knowledge trainings as assigned Requirements: Ability to be on your feet for 8-10+ hours per day on uneven ground (concrete, rock, grass, mud/dirt, etc.), while wearing the monitoring backpack (weighing up to 25 lbs.) as well as carry other equipment as needed (ladders, water coolers, etc.) Love being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders to high heights (up to 300ft) Ability to understand and use hand-held device, and have some mechanical abilities (preferred) Reliable transportation to the worksites is required Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #ELLDAR

Benefits: Flexible schedule Opportunity for advancement Paid time off Training & development Make $1,000-$1,500/Week Doing Honest Work With a Team That Has Your Back We're Shine of Cincinnati-one of the fastest-growing pressure washing companies in the city-and we're hiring hardworking technicians who aren't afraid to get after it. We do everything from house washes to massive commercial projects, and we're looking for reliable people who want steady work, weekly pay, and a chance to move up. What You'll Do: Pressure wash houses, driveways, decks, apartment complexes, and big commercial buildings. Use professional-grade equipment-pressure washers, soft wash systems, surface cleaners (we'll train you if needed). Work a mix of day and night shifts, depending on the job (especially big commercial jobs this summer). Keep your gear and truck clean, and document your work using our simple system. Talk with customers when needed-be respectful, be yourself. What You Can Expect: Weekly pay: $1,000-$1,500 depending on experience and hustle Bonus opportunities + chance to move into lead or manager roles A variety of work: residential, night work, and large commercial jobs-no boring days All equipment, gear, and uniforms provided-no junk, no cutting corners Paid training and the opportunity to grow with us as we open new locations soon What You Need: Valid driver's license and a clean-ish record Show up on time, ready to work, with a good attitude Not afraid of ladders, heights, or getting dirty Comfortable working outdoors in all kinds of weather Experience is a plus-but we'll train the right person Why Shine? We're building a crew of solid people who want more than just a paycheck. We're growing fast and giving our team real opportunities to grow with us. If you want to be part of something that's going somewhere-and make good money while you do it-this is the place. Schedule: Monday-Friday with some weekend or night work depending on the job. Start early, finish early (most days). Compensation: $1,000.00 - $1,750.00 per week Do you like people? Do people like you? Then... It's a great time to shine! This is your opportunity to forgo a suit, grab a Shine t-shirt, and start helping people while making a living. Let your light shine! You can be a light for people - helping them stay safe while enjoying and maintaining the largest financial investment of their lives - their homes. You can be a light to your own team of like-minded people. You can be a light in your community and provide the type of services that everyone loves and needs, but don't have the time and expertise to get it done safely and correctly. Choosing to lead by serving is our passion. Shine Window Care specializes in the following services: Window Cleaning Pressure Washing Gutter Cleaning Holiday Lighting THE SHINE STORY: What started as one guy with a desire to create opportunities for others is now a nationwide family of businesses - working to spread light, caring excellence, and team success. In 1998, Chris Fisher graduated college and set out on a journey to build a company. From one guy with a squeegee, Shine is now a growing national franchise employing great people who make exceptional teams. Our Franchises Need People Like YOU! Whether you are already a window cleaning expert or have no experience at all, we are looking for those who display strong character, work ethic, and are driven to be the best! Shine provides all the training, technology, support, and know-how to help you get it done. You bring a smile and a heart for learning and the Shine business will work very well for you. Shine is the name we chose to describe the work we do, the people that do it, and the God we serve. Our hope and intention is that our communities will see something different in us - something inspiring - something attracting. Let your light shine!

The technician is responsible for all aspects of the daily care of the Plains gartersnake and Eastern hellbender collection, under the supervision of head zookeepers. is temporary through June 30, 2026. Responsibilities Prepares and offers diets, performs water changes, cleans enclosures, and maintains equipment. Adheres to biosecurity protocols. Maintains the cleanliness and organization of work areas. Maintains accurate records on animals and equipment, makes animal observations, and collects & records biological data. May participate in field activities. Reports potential issues or concerns promptly to supervisors including, but not limited to, animal health concerns, safety issues, and facility/maintenance problems. The ability to follow written and verbal instructions and pay attention to fine details is essential. Practices good communications skills and has the capacity to work well with others while maintaining the ability to work effectively as an individual. Implements sustainable practices in daily tasks whenever possible. Ability to plan and organize work in an efficient and cost‐effective manner and without direct supervision required. Constantly strives to further the mission of the organization and avidly supports the Columbus Zoo and Aquarium, Zoombezi Bay, Safari Golf Club and The Wilds. Performs other duties as assigned. Qualifications Experience Experience in the handling and care of snakes required. Experience in the care of aquatic animals required. Experience in maintaining aquariums and aquatic life support equipment required. Experience using analytical software and programs such as Excel, ImageJ, and ZIMS preferred. Education B.S. degree in biological sciences, natural resources, animal science, or related field preferred. Applicants must have a working knowledge of natural history, biology, animal husbandry, and conservation issues as they apply to reptiles & amphibians specifically and Ohio wildlife in general. Physical Demands Must be able to lift and carry up to 50 lbs and work in inclement weather Schedule Ability to work a flexible schedule including weekends and holidays. Approximately 40 hours per week.

Looking for Technician's All Classes of Technician's (A) Technician, (B), Technician, (C) Technician, and Entry-Level Express Technician 5 Day work week, Pay based on experience level. Requirements/Qualifications: Prior Infiniti, Nissan, and/or other relevant major manufacturer automotive experience 3 years (preferred) but not required. ASE and/or manufacturer certification, required for A & B class Technicians. C level Technician and Entry-Level Express Technician Welcome. A real team player who is focused on providing exemplary client services. Ability to multi-task in a fast paced work environment. Strong organizational skills and detail oriented. Be at 18 years of age. Operate a wide variety of cars, light trucks, and vans, with ability to drive both manual and automatic transmissions. Clean driving record. Drug free work place. Work Conditions/Responsibilities: As an "A" Class Automotive Technician you will perform vehicle repair and maintenance as assigned in accordance with dealer and factory standards: Diagnose and repair vehicle automotive systems including engine, steering, suspension, brakes, and air conditioning to required specifications. Preform vehicle inspection to identify necessary repairs. Provide labor and time estimates for all repair work. Inspect and test vehicles to determine necessary and applicable repair work. Complete necessary paperwork and documentation for service repairs. Participate in on-going company and manufacturing training, and education programs, to stay current and abreast of changing technology. Provide and maintain a basic inventory of required hand tools. Benefits: Closed Sundays / 5 day work week Paid vacations 401(K) Dental Insurance Vision Insurance Medical Insurance Employee Discount Flexible Schedule Work Location: One location and in person.

BFC Solutions, the nation's leader in HVAC preventative maintenance is growing again! We are hiring a Accounts for our Filter Service Department as a Full-time employee in our market. Starting pay for the Service Technician role will be up to $22.00/hour, depending on experience and qualifications for our Toledo OH location. We offer the following benefits: 401(k) with employer matching Excellent advancement opportunities Company provided cell phone. Company vehicle Dental insurance Health insurance Vision insurance 8 paid holidays Paid time off As a Service Technician with Bonded Filter, you will install air filters and perform coil cleaning primarily in rooftop air ventilation and HVAC systems for retail and commercial businesses. Bonded Filter Company specializes in preventative maintenance and provides air quality solutions for some of the most recognized retail and commercial brands in America. Service Technician Job Requirements: FREQUENT overnight/out of town travel. For insurance purposes, to operate the company vehicle, you must be at least 21 years of age. Possess and maintain a valid Driver's License subject to continuous review. Must be comfortable with and confident working at heights up-to 40 feet above ground level and using extension ladders. Meet ladder safety requirements as defined by OSHA. Weigh less than 275 lbs due to ladder weight restriction limit Must be comfortable working outside in all weather conditions. Integrity - must act with integrity at all times. Must demonstrate a superior Customer Service attitude. Be comfortable using the Customer's & Company technology platform. Work independently with remote supervision & the Field Support Team. A typical work week will require 45 - 50 hours. Must be able to lift and carry up-to 75 pounds repeatedly. Service Technician Preferred Experience: Facility and/or grounds maintenance Construction HVAC Cable installation Route delivery and set-up As a Service Technician with Bonded Filter, we make sure to put our technicians first. We offer comprehensive benefits, pay advancement, and bonus opportunities. We give our Technicians the tools to be successful: 2 weeks of paid training, a company van, tools, uniforms, materials, as well as 24-hour support. This position offers stable year-round employment with a growing industry leader in Air Filtration Service. As an employee, you can feel confident that your health and well-being are among our highest priorities. We offer a competitive salary and benefits plan that includes-Medical, Dental, Vision, Prescription Drug, Life Insurance, 401K Savings Plan, and Paid Time Off (PTO). BFC Solutions is an Equal Opportunity Employer #IND123

at Ayr Wellness AYR Wellness is a publicly traded, multi-state cannabis company with more than 85 dispensaries. We are one of the largest scale producers of high-quality cannabis in the U.S., and our purpose is to be a force for good. People are at the heart of everything we do, and we are passionate about bringing progress and positive changes to our communities, our industry, and our world. Our talented and reliable team members are the foundation of our business and investing in exceptional talent is paramount to our success. The key to building a culture where everyone can thrive starts and ends with our teams. Their collective courage and kyndness sets AYR apart. Your career growth at AYR is limitless, and we believe in creating an environment where everyone can flourish and win together. Job Summary Our Cultivation Technician positions are responsible for executing cultivation plans in keeping with the Company's operating procedures for indoor and outdoor cultivation. Technicians conduct the day-to-day assignments and tasks of the cannabis production cycle. Cultivation: Cloning, cutting, and transplanting; watering; labeling; and inventory data input. Plant care during vegetative and flowering phase: trimming, manipulating, and staking; big leafing and pruning; watering; plant monitoring; inventory data input. Harvesting: Cutting plants; weighing and inventory data input into the electronic inventory tracking system. Operating and maintaining cultivation systems/equipment; stocking and handling production inputs and supplies; sanitizing and cleaning growing rooms, cultivation workspaces and tools. Duties and Responsibilities Cloning: cutting, rooting, and transplanting; clone care, watering and feeding; clone monitoring and climate control; labeling; and inventory data input into state mandated electronic tracking system. Monitors growing conditions and reviews changes in humidity, moisture and temperature and cultivation procedures to ensure conformance with quality control standards. Inspects crop to ascertain conditions such as leaf texture, bloom size and the existence of pests or disease; removing substandard or diseased plants to maintain quality standards. Plant monitoring and care during vegetative and flowering phase: trimming and staking; big leafing and pruning; plant care, watering and feeding; plant monitoring and climate control; pest and disease control; inventory data input. Harvesting: cutting plants; trimming cut plants; removing flowering tops; weighing and inventory data input into the electronic inventory tracking system. Curing: hanging and dry-racking flowers; monitoring curing process and climate control; labeling; weighing and inventory data input. Operating and maintaining cultivation systems/equipment: monitoring, calibrating, running, and maintaining lighting, irrigation, climate control and other cultivation systems; stocking and handling production inputs and supplies; sanitizing and cleaning growing areas, cultivation workspaces and tools. Ensure daily compliance with policies and procedures including but not limited to, state compliance, security protocols, and access protocols. Other duties as required or needed to assist the company in meeting goals. Qualifications Excellent communication skills Strong work ethic, reliable, flexible Commitment to producing highest quality work Ability to work in a demanding, fast-paced environment, including flexible and/or extended hours as needed Education High school diploma/GED preferred Experience Experience in the cannabis or agricultural industry not required, but preferred Competencies (Knowledge, Skills, and Attitude) Adaptable / Flexible - Effectively manages change and adjusts comfortably to new people and processes; multi-tasks and handles ambiguity and stress well while remaining positive; bounces back quickly from challenging situations; asks for help when needed and stays focused on being a force for good. Direct reports No direct reports Working conditions The person in this position may be exposed to dust, kief, cleaning chemicals and fumes. Although systems are in place to remove these byproducts, there is still exposure to some degree. Frequently works in rooms with bright light where eye protection is required. Frequently works in rooms with moderate heat and humidity. The person in this position is constantly exposed to moderate background noise due to environmental systems, equipment and fans. Physical requirements Prolonged sitting, standing and / or walking motion/movement will be required throughout the shift. Constant movement of hands/fingers and limbs; this position requires good manual dexterity, coordination and stamina. Frequently ascends/descends a ladder to inspect/maintain plants. Occasionally operates power hand tools and other cultivation machinery. Must be able to inspect and detect quality deviations and defects. Occasional lifting, positioning or moving items up to 50 pounds. AYR Wellness is an equal opportunity employer. We are committed to building a team that represents a variety of backgrounds, perspectives, and skills. We do not discriminate on the basis of race, color, religion, creed, national origin, ancestry, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, genetic information, marital status, military or veteran status, or any other protected status in accordance with applicable federal, state, and local laws.