Controls technician jobs in Nevada

Carlisle Weatherproofing Technologies (CWT) is a leading supplier of building envelope solutions that effectively drive energy efficiency and sustainability in commercial and residential applications. We are looking for a Controls Technician working out of our Fernley, NV. 1st Shift: Monday - Friday (weekend support as needed) Job Summary: This position monitors and improves the control system reliability of automated production equipment. When production system performance falls below acceptable levels, they must support troubleshooting efforts to avoid or minimize interruptions to production. A successful controls technician has a keen eye for details and good mechanical/electrical aptitude. Typically working 40 hours per week with weekend support as required. 10% travel time to other facilities and or trainings. Duties and Responsibilities: * Process and production equipment troubleshooting. * Lead troubleshooter for higher level electrical/automation issues * Perform training for personnel on their respective shift on the various electrical/automation systems throughout the plant. * Support, provide training, and conduct audits for the plant's Lockout/Tagout program * Install, maintain, repair, or replace control devices such as HMIs, VFDs, PLCs components etc. as needed. * Comply and participate regulatory, Carlisle, & departmental policies, procedures, & standards. * Monitors significant plant downtime events and initiative problem solving activities. * Support implementation and improvement of existing preventive/predictive maintenance programs. * Supports equipment installation coordination/supervision associated with facility needs. * Support procurement of replacement and upgrade hardware, as needed. * Perform needed maintenance, repair or rebuild/calibration of electrical control components and direct support of production operating needs. * Communicate issues and potential required changes with Controls Engineer. * Evaluate electrical equipment operation and suggest necessary action when malfunctions occur, or improvements are needed. * Daily monitoring of various plant utilities that can include chiller, air compressor, security system & fire protection system. * Complete process and preventive maintenance work orders. Capture and communicate associated data. * Maintain plant electrical control systems on equipment such as mixers, conveyors, compressors, hydraulics, motors, pneumatics, automated controls and pumps. * Troubleshoot electrical control issues, repair failures of production and facilities equipment. * Install and monitor current monitoring systems. * Maintain and enhance hardware and software knowledge to ensure up-to-date troubleshooting capabilities. * Work with mechanical and electrical maintenance technicians to help develop their control skills. * Execute projects on an as needed basis. * Assist mechanical and electrical technicians with preventive maintenance, breakdowns and work orders as needed. * Other duties as assigned. Required Knowledge/Skills/Abilities: * Knowledge of PLC language (ladder logic, structured text, sequential function charts, etc.) * Proficient in working with PLCs, HMIs, sensors, level controls, AC/DC drives, VFD etc. * Experience with Allen Bradley controls preferred. * Industrial electrical AC/DC troubleshooting skills. * Knowledge of CMMS, SAP, MS programs. * Demonstrated ability to utilize electrical instruments in troubleshooting control systems. * Awareness of electrical codes such as NEMA * Inter-Personnel Skills - Including the ability to be a team player. The ability to pass on information & training to others. * Effective written and verbal communication. * Ability to produce and interpret mechanical and electrical drawings. * Knowledge of safe working practices around moving and electrical equipment. * Critical thinking, troubleshooting and problem-solving ability. * Understanding of OSHA and industrial safety protocols. Education and Experience: * Required: * High School diploma or GED and degree from technical school, or industrial maintenance certifications (PLC, Machine Logic) required. * Equivalent Experience: High School Diploma or GED and 3 years of experience working as a control technician in an industrial manufacturing environment. Working Conditions: * Activities occur inside an insulation manufacturing facility. Job includes but are not limited to exposure to the following. * Temperatures exposed to both Ambient/outside temperatures. * Nuisance dust, use of chemicals, working with mechanical parts, pinch points. * Noise of industrial machinery * Fast paced 24/7 operation BENEFITS AND PERKS Our employees' well-being is crucial to Carlisle's success. Despite the nationwide increase in healthcare costs, Carlisle has maintained the same employee premiums for four consecutive years by absorbing the rising medical insurance expenses. Furthermore, you have the flexibility to tailor a benefits program that perfectly suits your needs. Benefits offered: * Medical, Dental, and Vision insurance - Starts Day 1 * Life and Accidental Death & Dismemberment Insurance * Leave & Disability Income Protection (FMLA, LOA, PPL, STD, LTD) * Employee Assistance Program (EAP) * Health Advocate - health care concierge service * PTO - sick days, 11 holidays, vacation * 401K Retirement Savings Plan with company match * Employee Stock Purchase Plan * Flexible Spending accounts (commuter benefits, flexible spending accounts, health savings account) * College Scholarships for Dependents * Tuition Reimbursement

**Job Title: Johnson Controls Technician (Certified)** Join a dynamic and innovative team at McAshan Inc., where we pride ourselves on our commitment to delivering top-notch technological solutions and exceptional customer service. We are seeking a highly skilled and certified Johnson Controls Technician to support, maintain, and optimize our advanced control systems and provide unparalleled service to our clients. **Position Summary:** As a Johnson Controls Technician, you will be responsible for the installation, programming, troubleshooting, and maintenance of Johnson Controls' systems. Working closely with a team of professionals, you will ensure that all systems operate efficiently and effectively to support our clients' needs. **Key Responsibilities:** - Install, program, and configure Johnson Controls systems to meet specific project specifications and client requirements. - Perform regular maintenance, testing, and inspections of control systems to ensure optimal operation and compliance with industry standards. - Diagnose and troubleshoot system issues promptly, providing effective solutions to minimize system downtime. - Collaborate with project managers, engineers, and other stakeholders to deliver projects on time and within budget. - Provide technical support and training to clients, ensuring they fully understand system operations and capabilities. - Keep up-to-date with the latest technological advancements and industry trends to enhance skills and maintain certification. - Document all service activities, including installation, maintenance, and troubleshooting reports. **Qualifications:** - High school diploma or equivalent; technical degree or certification in electronics or a related field is preferred. - Johnson Controls certification is required. - Proven experience with installation, programming, and maintenance of Johnson Controls systems. - Excellent problem-solving skills and attention to detail. - Strong communication and interpersonal skills. - Ability to work independently and as part of a team. - Valid driver's license and ability to travel to various job sites as required. **Benefits:** - Competitive salary and performance-based bonuses. - Comprehensive health and wellness benefits. - Opportunities for professional development and career advancement. - Supportive and inclusive work environment. **Application Process:** If you are a certified Johnson Controls Technician with a passion for technology and customer service excellence, we welcome your application. Please submit your resume and a cover letter detailing your experience and interest in this position to McAshan_********************. McAshan Inc. is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or any other characteristic protected by law. Join our team and help us create solutions that matter!

Job Description **Job Title: Johnson Controls Technician (Certified)** Join a dynamic and innovative team at McAshan Inc., where we pride ourselves on our commitment to delivering top-notch technological solutions and exceptional customer service. We are seeking a highly skilled and certified Johnson Controls Technician to support, maintain, and optimize our advanced control systems and provide unparalleled service to our clients. **Position Summary:** As a Johnson Controls Technician, you will be responsible for the installation, programming, troubleshooting, and maintenance of Johnson Controls' systems. Working closely with a team of professionals, you will ensure that all systems operate efficiently and effectively to support our clients' needs. **Key Responsibilities:** - Install, program, and configure Johnson Controls systems to meet specific project specifications and client requirements. - Perform regular maintenance, testing, and inspections of control systems to ensure optimal operation and compliance with industry standards. - Diagnose and troubleshoot system issues promptly, providing effective solutions to minimize system downtime. - Collaborate with project managers, engineers, and other stakeholders to deliver projects on time and within budget. - Provide technical support and training to clients, ensuring they fully understand system operations and capabilities. - Keep up-to-date with the latest technological advancements and industry trends to enhance skills and maintain certification. - Document all service activities, including installation, maintenance, and troubleshooting reports. **Qualifications:** - High school diploma or equivalent; technical degree or certification in electronics or a related field is preferred. - Johnson Controls certification is required. - Proven experience with installation, programming, and maintenance of Johnson Controls systems. - Excellent problem-solving skills and attention to detail. - Strong communication and interpersonal skills. - Ability to work independently and as part of a team. - Valid driver's license and ability to travel to various job sites as required. **Benefits:** - Competitive salary and performance-based bonuses. - Comprehensive health and wellness benefits. - Opportunities for professional development and career advancement. - Supportive and inclusive work environment. **Application Process:** If you are a certified Johnson Controls Technician with a passion for technology and customer service excellence, we welcome your application. Please submit your resume and a cover letter detailing your experience and interest in this position to McAshan_********************. McAshan Inc. is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or any other characteristic protected by law. Join our team and help us create solutions that matter!

George Hall started the George T Hall Company in 1932 and we continue to keep his vision and legacy alive. Through our evolution, we have shown an ability to adapt and grow into new technologies and industries which has made us the system integrator you see today. People are the foundation of any outstanding organization and we take pride in our multi-generational workforce that values curiosity, integrity, and innovation. We are also a proud finalist for the NNHRA 2024 Best Places to Work. Our mission is simple: to bring value to our clients by utilizing our expertise in automation and control solutions to improve performance, reduce waste, and provide value data while establishing successful partnerships in the industry. We value continuous improvement to the benefit of our customers, vendors, and employees. If this sounds like the type of environment you are seeking, we may have a position for you! What we are looking for: We are seeking a Panel Shop Technician for our Reno, Nevada office. As a Panel Shop Technician, your main duties will relate to assembling, fabricating, and wiring UL control panels in accordance with design drawings. This is the perfect job for someone who loves technology and working with their hands. Our clients are contractors or end users supporting a wide range of industries including water / wastewater, pharmaceutical, food & beverage, mining, aerospace, and more. We offer a number of products and services to these industries such as: PLC / HMI SCADA / Integration Software Thermal & Process Instrumentation Custom UL Control Panels Industrial Field Services Essential Duties and Responsibilities include the following: Other duties may be assigned as needed · Maintain quality standards for each build. · Assemble, fabricate, and wire in accordance with provided CAD drawings and bill of materials. · Monitor control panel during manufacture for quality issues. · Redline drawings and update BOM for any quality irregularities or engineered changes. · Work closely with engineering during the build process to ensure requirements of build are met. · Prepare finished control panels for shipment ensuring products meet all quality assurance inspections. · Monitor and advise on inventory levels of frequently used materials. · Assist unloading inbound material from trucks utilizing forklift or palette jack as needed. · Utilize software tools for logging time, monitoring budgeted hours and other as needed. · Maintain a clean and organized shop area. Required skills/abilities: Hard skills: Working knowledge of Microsoft Word and Excel as well as Windows 10 knowledge. Understanding of industrial control systems and products (optional). Ability to use hand tools and test instruments. Soft skills: Strong commitment to accuracy and detail. Strong organizational skills. Excellent verbal and written communication skills. Team player attitude. Education/Credentials/Experience: Degree and or certification in electrical systems, control theory, HVAC, or other relevant discipline. Basic knowledge of electrical concepts including AC and DC power circuits. Experience working in a team environment where regular communication with colleagues is required. Experience with detailed manufacturing and assembly. Physical Requirements: Ability to stand or use stool at an oversized table the majority of the day. Ability to lean over table to complete build of center areas of the panel. Ability to maneuver through office and shop area. Ability to lift items up to 50 pounds. Ability to climb ladder to shelf heights to retrieve or store product.

Controls Tech/Programmer - Las Vegas, NV - Large Energy & Automation Company BAS Controls Specialist ABOUT The COMPANY: Tier 1 - Large Energy & Automation Solutions Company Solutions: Commercial Buildings, Data Centers, Infrastructure, Software Engineering, etc. IDEAL CANDIDATE: Interest/Experience in BAS Programming (Script/Line or Block/Graphical) PLUS (not required) - integration experience with Tridium Niagara software RESPONSIBILITIES: Primarily will be in the field, traveling to various sites in Las Vegas, NV Point to Point Check-Out/Commissioning Controls installation, retrofit, and DDC programming (Block-based or Script-based) Reconfiguration, sequence modification and occasional rewriting Experienced with Third-Party integration (BACnet, Modbus, LON, etc.) Perform Preventative Maintenance Services Ability to work on a team and independently/lead some projects Work with subcontractors/delegate work Produce graphics and various custom views Configuration of control systems and integration into various control product lines Integrate systems of various controlled points to local & national software Troubleshoot BAS Controls and sometimes Access Control/IP TV devices OFFERED: Excellent Benefits: Medical, Dental, Vision, etc. Retirement Program: 401K w/ Match Vacation / Holiday Pay Mileage Reimbursement

We are seeking a highly skilled Mission Controls Technician to join our team at one of our largest data center clients. The ideal candidate will have over 5 years of experience in a customer-facing or internal support role, with a strong understanding of electrical and mechanical systems in data centers or mission-critical environments. We are a company committed to creating inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity employer that believes everyone matters. Qualified candidates will receive consideration for employment opportunities without regard to race, religion, sex, age, marital status, national origin, sexual orientation, citizenship status, disability, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to Human Resources Request Form (****************************************** Og4IQS1J6dRiMo) . The EEOC "Know Your Rights" Poster is available here (*********************************************************************************************** . To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: *************************************************** . Skills and Requirements - 2+ years of experience in a customer-facing or internal support role - HVAC (cooling/infrastructure/chillers/cooling towers) - electrical knowledge - how power flows- power infrastructure, including UPS generators. - Mechanical knowledge (HVAC related) - Strong understanding of electrical and mechanical systems in data centers or mission-critical environments. - HVAC school (+) - Experience with DCO systems, data centers, or telecom environments (+)

***Le poste étant situé aux États-Unis, la description de poste est disponible uniquement en anglais.*** ***As this position in based in the United States, the job description is available in English only.*** ________________________________________________Automation Technician Stage Automation On-Call Position We are looking for an Automation Technician whose role will be to support the automation systems to ensure show readiness and safety by performing maintenance on electrical and mechanical equipment above the stage, developing a thorough knowledge of all automation and control systems, maintaining inventory of spare parts and supplies, and providing all other supporting services. The Automation Technician will: - Operate the automation control console and cue tracks in a safe and consistent manner for performances, artist training, and maintenance operations.- Maintain cue track documentation and participate in cue track rotation as directed;- Inspect and maintain electronic, hydraulic and motorized equipment and systems as directed;- Control machines and processes, by using either control mechanisms or direct physical activity to operate machines or processes;- Operate mechanized devices, or equipment, by running, maneuvering, navigating, or driving vehicles or mechanized equipment, such as forklifts and passenger vehicles;- Update maintenance and inspection records within Microsoft Word and Excel, as well as other show specific software such as AutoCAD and maintenance databases;- Maintain a safe working environment by conforming to all established safety policies and procedures;- Adhere to and promote all Occupational Safety and Health Administration (OSHA) regulations as they pertain to the safe operation of all elements related to the show; participate in all required health and safety classes and emergency rescue procedure training.- Maintain a flexible schedule for work calls, special events, rehearsals, training, maintenance and evening show performances;- Develop a thorough knowledge of Automation equipment specific to the production in order to operate it safely;- Establish and maintain interpersonal relationships, by developing constructive and cooperative working relationships with others, and maintaining them over time;- Participate in special projects including the installation of new automated show elements, and interdepartmental projects that include automated elements or other needs that may fall within the technician's specialty as directed;- Perform all other job-related duties as requested. The ideal candidate will have the following qualifications:- High school diploma or equivalent;- At least 1 year of experience operating and maintaining motion control systems and/or theater experience with high large-scale productions;- Strong metal fabrication skills such as cutting, grinding, fitting, aligning and welding;- Strong mechanical drafting skills, knowledge of AutoCAD and SolidWorks is an asset;- Ability to read and interpret drawings, blueprints and schematics;- Working knowledge and experience with industrial machines, motors, gearboxes and related tools, including design, uses, repair, and maintenance;- Working knowledge of AC\DC theory and electrical safety;- Excellent customer service skills and professional demeanor;- Ability to work varied shifts, including weekends and holidays;- Ability to work in active environment requiring standing, sitting, bending, crawling, climbing, crouching, and kneeling, often for extended periods;- Ability to lift 50 pounds;- Able to effectively communicate in English, in both written and spoken forms;- 10-hour OSHA course completion card required;- Verification of the right to work in the United States for Cirque du Soleil Entertainment Group, as demonstrated by completion of the Form I-9 upon hire and the submission of acceptable documentation (as noted on the Form I-9) verifying one's identity and work authorization. Cirque du Soleil Entertainment Group is an equal opportunity employer. We do not discriminate against applicants or employees because of their race, creed, color, age, religion, sex, disability, sexual orientation, marital status, military status, national origin or ancestry.

Job Description Envirogen is a leading provider of innovative water treatment solutions designed to meet the most demanding industry standards. We are seeking an Instrumentation and Controls Technician for our site in Henderson to be responsible for the installation, repair, and maintenance of our electrical and instrumentation systems, equipment, and fixtures. Your remit will cover a wide variety of responsibilities including: Inspecting and troubleshooting mechanical and electrical equipment using test equipment and industry standard procedures. Performing routine and preventative maintenance, lubrication, and minor adjustments on various machines and related equipment. Performing preventive, predictive, and corrective maintenance on WWTP and Process water systems and equipment. Installing new or replacement instrumentation and control systems, equipment, and support systems. Calibrating instrumentation using various meters and devices. MINIMUM JOB REQUIREMENTS Must demonstrate ability to efficiently maintain, install and repair a variety of equipment which may include pumps, engines, generators, valves, gates, mixers, conveyors, blowers, chemical feed and odor control, disinfection equipment, vacuum filters, and belt presses. Must demonstrate ability to use precision measuring devices, testing equipment and shop tools such as drill press, band saw, bench grinder, and torque wrench. Must demonstrate the ability to inspect and diagnose process problems in multiple unit processes, troubleshoot mechanical, electro-mechanical, hydraulic, or pneumatic equipment and take corrective action within policy and procedure limitations. Must have ability to operate Computer Maintenance Management System (software). Requirements Minimum five (5) years' experience in a related position, in a similar environment or process water systems with the ability to comprehend complex specification, blueprints and manuals. Demonstrated knowledge of Siemens Process Instrumentation, Allen Bradley PLC Instrumentation, and VFD Logic. Responds to alarm calls for emergency situations at the facility. Courses in wastewater or process water treatment are preferred. Ability to read wiring diagrams, basic ladder diagrams for controls, specification, and vendor instruction Benefits Health Care Plan Retirement Plan Life Insurance Paid Time Off

Envirogen is a leading provider of innovative water treatment solutions designed to meet the most demanding industry standards. We are seeking an Instrumentation and Controls Technician for our site in Henderson to be responsible for the installation, repair, and maintenance of our electrical and instrumentation systems, equipment, and fixtures. Your remit will cover a wide variety of responsibilities including: Inspecting and troubleshooting mechanical and electrical equipment using test equipment and industry standard procedures. Performing routine and preventative maintenance, lubrication, and minor adjustments on various machines and related equipment. Performing preventive, predictive, and corrective maintenance on WWTP and Process water systems and equipment. Installing new or replacement instrumentation and control systems, equipment, and support systems. Calibrating instrumentation using various meters and devices. MINIMUM JOB REQUIREMENTS Must demonstrate ability to efficiently maintain, install and repair a variety of equipment which may include pumps, engines, generators, valves, gates, mixers, conveyors, blowers, chemical feed and odor control, disinfection equipment, vacuum filters, and belt presses. Must demonstrate ability to use precision measuring devices, testing equipment and shop tools such as drill press, band saw, bench grinder, and torque wrench. Must demonstrate the ability to inspect and diagnose process problems in multiple unit processes, troubleshoot mechanical, electro-mechanical, hydraulic, or pneumatic equipment and take corrective action within policy and procedure limitations. Must have ability to operate Computer Maintenance Management System (software). Requirements Minimum five (5) years' experience in a related position, in a similar environment or process water systems with the ability to comprehend complex specification, blueprints and manuals. Demonstrated knowledge of Siemens Process Instrumentation, Allen Bradley PLC Instrumentation, and VFD Logic. Responds to alarm calls for emergency situations at the facility. Courses in wastewater or process water treatment are preferred. Ability to read wiring diagrams, basic ladder diagrams for controls, specification, and vendor instruction Benefits Health Care Plan Retirement Plan Life Insurance Paid Time Off

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary We offer incentive programs for turning in referral leads and quoting planned service agreements or L&M up to 6% payout of the sale value Paid vacation/holidays/sick time- 10 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Four (4) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or an associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $28-37 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at *************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Redwood is localizing a global battery supply chain that seamlessly integrates recovery, reuse, and recycling - keeping critical minerals in circulation and driving the energy transition. Founded in 2019, we're delivering low-cost and large-scale energy storage and producing battery materials in the U.S. for the first time, all from batteries we already have. The Instrumentation Technician is responsible for supporting the day-to-day verification, calibration, and repair of instrumentation across the Redwood Materials Battery Materials Campus in McCarran, Nevada. The role is responsible for the performance of verifications, calibrations, associated support tasks, and effective record keeping related to calibrations to support ISO certification. This role will support production lines, analytical labs, pilot plants, and general services departments. Relocation assistance available depending on level and experience. Responsibilities will include: Develop and document methods to troubleshoot and test various devices including gas analyzers, scales, pressure sensors, flow meters, temperature sensors, particulate meters, scales, and other production critical instrumentation. Perform instrument verifications and calibrations in production environments to be documented for record keeping and compliance with regulatory requirements and applicable standards where applicable (IATF16949, ISO9001, ISO17025, etc.). Learn new devices and how to test and evaluate the functionality of the devices. Read technical manuals and understand specifications of various devices and how they are applied. Desired Qualifications: Certification/degree in Instrumentation Technology or Electrical Systems Technology, or relevant experience in a related position Excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers Excellent computer proficiency (MS Office - Word, Excel, and Outlook) Must be able to work under pressure and meet deadlines, while maintaining a positive attitude and providing exemplary customer service Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices Shifts: A Shift: 6:00 am - 6:00 pm Sunday-Tuesday (every other Wednesday) C Shift: 6:00 am - 6:00 pm Thursday - Saturday (every other Wednesday) Physical Requirements: Ability to work with Tyvek suits, Powered Air Purifying Respirator (PAPR), and other personal protective equipment (PPE) Comfortable working in confined spaces and at elevated heights, including safely climbing ladders to access work areas. Essential physical requirements, such as climbing, standing, stooping, or typing. Ability to operate and train on equipment such as boom lifts, scissor lifts, and other specialized machinery Must be able to lift and carry up to 50 lbs. Working Conditions: Work performed in varied indoor and outdoor environments with exposure to hazardous materials and challenging conditions (noise, dust, chemicals, temperature extremes) while wearing required PPE for extended periods. The position is full-time. Compensation will be commensurate with experience. We collect personal information (PI) from you in connection with your application for employment with Redwood Materials, including the following categories of PI: identifiers, personal records, professional or employment information, and inferences drawn from your PI. We collect your PI for our purposes, including performing services and operations related to your potential employment. If you have additional privacy-related questions, please contact us at privacy@redwoodmaterials.com.

Who Are We? At BOXABL, we're revolutionizing the housing industry with innovative, affordable, and sustainable auxiliary dwelling units. Based in North Las Vegas, NV, our mission is to lower the cost of homeownership for everyone. As a forward-thinking building technology company, we're working hard to transform the way homes are designed and built. We're a fast-paced startup looking for motivated individuals to help us build the future of housing. Come and work for one of the most exciting tech startups anywhere! Job Summary We are seeking an experienced Electrical Technician with a background in home building or construction. The ideal candidate will be proactive, resourceful, and able to think quickly to resolve any challenges that may arise on-site. We need someone who is hands-on, not afraid to tackle tasks head-on, and committed to getting the job done efficiently and effectively. Job Duties and Responsibilities Install, repair, and maintain electrical systems, equipment, and components, including wiring, fixtures, and appliances. Troubleshoot and repair electrical issues. Perform routine maintenance and system inspections. Ensure systems meet safety standards and regulations. Use diagnostic tools to identify and fix faults. Collaborate with engineers and technicians on projects. Document maintenance and repair activities. Respond to emergency electrical issues as needed. Experience and Education High School diploma; completion of an apprenticeship program or technical training in electrical work. Journeyman electrician license or equivalent certification preferred. Knowledge of electrical systems, circuits, and wiring.

Looking for an opportunity to work with a talented team and expand your experience as a Logistician? SSI needs to add an experienced Logistician to support our current list of services provided for the U.S. Navy / Marine Corps. This position is established in support of the USMC Light / Attack Helicopter Programs Office (PMA-276). PMA-276 manages the cradle to grave procurement, development, support, fielding and disposal of the Marine Corps rotary wing close air support, anti-armor, armed escort, armed/visual reconnaissance and fire support program systems. Duties will include: Develop and update key Logistics documentation to include LCSP, SPB, PSAs as required. Performing various tasks related to the development, operation, evaluation, and improvement of weapon systems supportability and/or maintainability programs and information systems. Working on logistics and maintainability programs and with logistics and maintenance control organizations on issues such as: Technical evaluation and identification of weapons systems logistics requirements and resources. Analysis and pursuit of Condition Based Maintenance (CBM) opportunities. Development of logistics support and maintainability programs or plans. Systems acquisition requirements analysis. Budgetary or financial analysis and control. Life cycle cost analysis and control. Weapons systems hardware and software standardization and compatibility. Integrated Logistics Support (ILS)/Reliability & Maintainability (R&M) program test and evaluation planning and execution. ILS/R&M program management analysis. Collecting, compiling, analyzing, investigating, researching, and applying logistics, maintenance, acquisition, and financial data and information. Developing, modifying, preparing, and validating documentation in relation to automated logistics and maintenance data reporting systems, and management information systems. Specific Duties: Providing H-1 Aircraft System Modification and Retrofit Team Support. Scheduling, tracking, and capturing H-1 aircraft modification and retrofit requirements within the program office. Assisting with the development of a program Integrated Master Plan to support Mod/Retrofit planning, management, and execution. Interfacing with program stakeholders within the program office, outside vendors, and Fleet Support Team representatives. Education: BS or BA degree in Acquisition, Logistics Management, Business, or Management; or Designation as a Certified Professional Logistics (CPL). Allowable Substitution: An additional two (2) years of experience working in direct support of Defense life-cycle logistics can be substituted for a BS or BA degree. Experience: At least six (6) years of experience in support of defense life-cycle (acquisition) logistics. This position will require U.S. citizenship and an active DoD Secret clearance. What You Can Expect From Us Positive Office environment Professional and knowledgeable team and leadership Business Office hours What's In It For Me? Competitive salary Great benefits, including: Company-subsidized PPO Medical, Dental, and Vision coverage 401(k) Retirement Plan with company match Paid Time Off 10 Paid Holidays per year Education Assistance Company-subsidized Corporate Fitness Program Medical and Dependent Care Flexible Spending Accounts Company-paid Life and Accidental Death and Dismemberment Insurance with an option to increase coverage Company-paid Short- and Long-term Disability Insurance Company-paid Employee Assistance Program Flexible hours Opportunities for on-the-job training What Your Experience Working For Us Will Be Like Ask any of our employees and they will tell you SSI is a great place to work with an upbeat and positive culture. We take pride in our work to continuously improve on our performance in a manner that enhances the mission of the agencies we serve while expanding opportunities for our employees and our company. What You'll Enjoy About Where We're Located Lexington Park is located in St. Mary's County near the lush Chesapeake Bay. The area's many waterways and abundant wildlife make it a haven for photographers and water-sports enthusiasts. St. Mary's County offers limitless attractions for families and history buffs, including Historic St. Mary's City Living Museum of History and Archaeology, the Piney Point Lighthouse, and beautiful state parks. Homes are affordable, and the cost of living is below the national median.* Our Lexington Park office is adjacent to the PAX River Naval Air Station.

EO Solutions is an aerospace and defense company committed to advancing innovation in Space Domain Awareness (SDA). With locations in Las Vegas, Huntsville, and Hawaii, we design and deploy next-generation systems that support national security and global space operations. We are a fast-growing, mission-focused team that values technical excellence, integrity, and collaboration in everything we do. Position Summary EO Solutions is seeking an experienced and versatile Electrical Engineering Technician to support our SDA hardware team in Las Vegas. This role focuses on electrical assembly, integration, testing, and maintenance of complex systems, including sensors, enclosures, and ground-based infrastructure. The ideal candidate will bring strong electrical diagnostic and troubleshooting skills, with experience in control systems, wiring, and component-level testing. This position plays a key role in supporting the development and deployment of systems critical to national space domain awareness missions. Key Responsibilities Assemble, integrate, and test electrical subsystems including wiring harnesses, PCB assemblies, enclosures, and connectors Perform electrical diagnostics, functional tests, and troubleshooting of system-level components Install and commission electrical components for SDA sensor systems and supporting infrastructure Interpret and work from electrical schematics, wiring diagrams, and engineering documentation Support field deployments and perform on-site system checks, maintenance, and repairs Assist engineers in test procedures, prototype evaluations, and validation of system performance Maintain accurate build documentation and contribute to continuous improvement in electrical build processes Ensure compliance with quality standards, safety protocols, and company procedures Manage tools, electrical inventory, and test equipment in an organized and safe manner Collaborate with cross-functional teams including systems engineers, mechanical technicians, and program managers Qualifications Required: 3+ years of hands-on experience in electrical assembly, integration, or support Proficiency with wiring, soldering, crimping, and use of multimeters or oscilloscopes Experience in reading and interpreting electrical schematics and technical documentation Strong attention to detail and ability to diagnose and resolve technical issues Comfortable working in lab and field environments, including remote sites U.S. Citizenship required; must be eligible for a U.S. government security clearance Preferred: Associate degree in Electrical Engineering Technology or equivalent trade certification Experience working in aerospace, defense, or high-reliability system environments Familiarity with PLCs, control panels, or embedded system interfaces Understanding of EMI/EMC best practices in system integration Experience supporting field deployments and remote troubleshooting Travel: Occasional travel to support field installations or other EO Solutions sites Join EO Solutions and enjoy a generous salary and benefits package! At EO Solutions, we prioritize the well-being of our team members. That's why we cover healthcare, vision, and dental plans for you, your spouse, and your dependents. We also value work-life balance and encourage our employees to fully utilize their Personal Time Off (PTO) for rest and relaxation. In addition to these, we offer many other benefits and services to ensure our employees thrive both personally and professionally. Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Health insurance Health savings account Life insurance Paid time off Professional development assistance Relocation assistance Tuition reimbursement Vision insurance EO Solutions is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Westgate Resorts is the largest privately held timeshare company in the world , with 60+ resorts in top destinations like Orlando, Las Vegas, Gatlinburg, Park City, and Myrtle Beach. Recognized by U.S. News & World Report as one of the Best Companies to Work For, we're committed to creating a supportive, rewarding workplace where our 9,000 Team Members can grow and thrive. Since 1982, we've delivered unforgettable vacations through exceptional service, innovation, and community engagement. With the recent addition of VI Resorts by Westgate, our footprint now includes the Pacific Northwest, Hawaii, Canada, and Mexico. Join us and be part of a team that values passion, integrity, and excellence-where your work helps create memories that last a lifetime. About Westgate Flamingo Bay Resort: Situated just 2.5 miles from the world-famous Las Vegas Strip, the tropically landscaped Westgate Flamingo Bay Resort allows you the ideal opportunity to help create remarkable guest experiences in a fun and rewarding environment. As part of the Westgate Flamingo Bay Resort team, you will help provide guests a home away from home at our amazing resort that features complimentary scheduled shuttle service to the Las Vegas Strip and Westgate Las Vegas Resort & Casino. As part of Westgate Resorts-recognized by U.S. News as one of the Best Companies to Work For-you'll be joining a team committed to excellence and creating unforgettable vacation experiences, and supporting your career growth where you are or at 60+ resorts across the company. Job Description Supports resort operations by performing maintenance duties such as projects, preventive maintenance, and work orders. Duties Perform engineering projects, guest calls, preventative maintenance, and repairs on plumbing, electrical components, HVAC systems, and household appliances. Maintain interior and exterior surfaces, including walls, ceilings, flooring, and pools/spas. Operate and maintain resort equipment, tools, and software systems effectively and safely. Participate in procurement and inventory processes to ensure availability of necessary materials. Communicate professionally with guests and team members, addressing needs and resolving issues promptly. Adhere to safety guidelines, identify potential hazards, and comply with all CFI/Westgate Resorts policies and procedures. Perform other duties as assigned by resort operations leadership. Conduct regular inspections of resort facilities to identify and report maintenance needs. Assist in the development and implementation of energy-saving initiatives and sustainable practices. Collaborate with other departments to ensure seamless guest experiences during maintenance activities. Maintain accurate records of maintenance activities, including work orders, repairs, and equipment servicing. Participate in ongoing training and professional development to stay current with industry standards and new technologies. Respond to emergency situations and perform necessary repairs or interventions as needed. Assist in the orientation and training of new engineering team members. Contribute to the continuous improvement of maintenance processes and procedures. Qualifications Minimum of 1-3 years in Engineering/Maintenance operations in a resort or commercial environment. Must have and maintain valid Driver's license. CPO license as required by Resort High school diploma or general education degree GED. The Team Member must regularly lift and/or move up to 50 pounds. Follow instructions without close supervision. Must be able to work weekends and holidays as needed. Required to pass a background screen, drug test, and prove eligibility to work in the United States. Additional Information Why Westgate? Comprehensive health benefits - medical, dental and vision Paid Time Off (PTO) - vacation, sick, and personal Paid Holidays 401K with generous company match Get access to your pay as you need it with our Daily Pay benefit Family benefits including pregnancy, and parental leave and adoption assistance Wellness Programs Flexible Spending Accounts Tuition Assistance Military Leave Employee Assistance Program (EAP) Life, Disability, Accident, Critical Illness & Hospital Insurance Pet Insurance Exclusive discounts for Team Member (i.e., hotels, cruise, resorts, restaurants, entertainment, etc.) Advancement & development opportunities Community Involvement Programs Westgate Resorts is an Equal Employment Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability status or any other protected status under federal, state or local law. If you have a disability and believe you need a reasonable accommodation in order to complete your application or any part of the recruiting process, please email [email protected] with the job title and the location of the position for which you are applying. This job posting is intended to provide a general overview of the position and may not include every responsibility, duty, or qualification required. Duties, responsibilities, and activities may change at any time with or without notice.

About MedicreationsMedicreations is a leading provider of medical devices and equipment, specializing in the design, development, and distribution of cutting-edge healthcare solutions. We strive to improve patient care and outcomes by offering innovative technologies and exceptional service of our devices to our clients About the Role: Medicreations is looking for and enthusiastic, detail-oriented and driven individual to help support the production, service and repair of our unique energy-based aesthetic medical devices. Prefer candidate to have experience working hands-on with the assembly and development of multiple energy-based and laser technologies in the aesthetic medical field. Candidates should have the ability to address complex challenges within the working environment and the capability to work independently to manage multiple simultaneous tasks within set timelines and due dates. Candidates should also work well in a collaborative team environment. Responsibilities: Test, troubleshoot, repair, and assemble devices, subassemblies and various components, including high-voltage laser power supplies and other electronics. Support the development and implementation of test fixtures, equipment, procedures and documentation for production, service, and QMS functions. Support product design and development activities related to new products and product improvements. Support development and maintenance of quality and regulatory documents and procedures. Provide customer technical support as needed via phone and video conferencing Maintain thorough, complete and accurate written records; comply fully with the companys quality system and any regulatory requirements. Follow safety rules for working with high-voltage and high-power lasers. Perform other duties as completion of responsibilities necessitates or as assigned by supervisor. Skills and Experience: 1. Minimum 1-3 years of experience in a technical role involving energy-based, electronic, or laser devices. 2. Understanding of system, board, and component design, testing, and troubleshooting. 3. Theoretical and practical knowledge and skills of adequate policies and procedures for the control of laser hazards and high voltage hazards, using relevant protective equipment, ensuring adequate safety education and training of other personnel. 4. Enjoy working with your hands/mechanical ability. 5. Strong analytical and problem-solving skills. 6. Experience with manufacturing within a Quality Management System (especially medical). 7. Strong interpersonal and communication skills. 8. Not afraid to ask questions and make suggestions for improvement towards peers and upper management. . 9. Be able to work under pressure due to customer demands. 10. Ability to walk, stand, bend, reach, stoop/squat, and crouch. Ability to carry heavy items. Educational Requirements: A.S. or higher in a technical discipline, optical engineering preferred Job Type: Full-time Benefits: 401(k) Dental Insurance Health insurance Life insurance Paid time off Schedule: Monday to Friday with some travel and possible weekends.

Job Title: Controls TechnicianJob Description We are seeking a skilled and dedicated Controls Technician to join our team. The ideal candidate will have experience in Building Automation Systems (BAS), Controls, or HVAC, and will play a critical role in ensuring our systems are efficient, reliable, and sustainable. This position offers opportunities for growth, particularly within software engineering, as interaction with building automation software is a key component of the role. Responsibilities + Install and maintain building automation systems, ensuring they are functioning efficiently and effectively. + Integrate and navigate various building automation systems, including WebCTRL. + Conduct point-to-point checkout, commissioning, and shutdown procedures. + Utilize advanced knowledge of TCP/IP networks, including wireless technology, to troubleshoot and resolve issues. + Communicate technical information clearly to non-technical audiences. + Collaborate effectively within a team to address and solve complex challenges. Essential Skills + High School Diploma or GED. + Minimum of 2 years of experience in Building Automation Systems, Controls, or HVAC. + Proficient in building automation software and HVAC systems. + Understanding of electrical field controls and BMS. Additional Skills & Qualifications + Bachelor's degree, associate degree, Technical/Business School Certificate or Diploma in HVAC or Controls. + Experience with building automation software such as WebCTRL. + Advanced knowledge of TCP/IP networks and wireless technology. + Proficiency in Microsoft 365 applications. + Strong English verbal and written communication skills. + Ability to manage multiple simultaneous challenges across various disciplines. Work Environment The position is based at the Switch Data Center in Reno at TRIC. The typical work hours are from 7:00 AM to 3:30 PM, Monday through Saturday. The role involves collaborating with a diverse team and handling a variety of technical challenges. Job Type & Location This is a Contract to Hire position based out of Reno, NV. Pay and Benefits The pay range for this position is $38.00 - $48.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Reno,NV. Application Deadline This position is anticipated to close on Dec 30, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

BAS Controls Technician - Tier 1 - Large Energy & Automation Solutions Company - Las Vegas, NV ABOUT The COMPANY: Tier 1 - Large Energy & Automation Solutions Company Solutions: Commercial Buildings, Data Centers, Infrastructure, Software Engineering, etc. POSITION: BAS Controls Technician (Remote/Office and some Field Commissioning) Hiring both Sr. Level and Mid-Level Candidates All work is done on a laptop LEVEL of Hire: Hiring both Sr. Level Candidate (3-10+) and Mid-Level Candidates (2-3 years) IDEAL CANDIDATE: • Interest/Experience in BAS Programming (Script/Line or Block/Graphical) • PLUS (not required) - integration experience with Tridium Niagara software RESPONSIBILITIES: Work closely with a Project Manager and Engineering Team Create BAS Applications following S.O.P.s and drawings/schematics Sequence Development/Rewriting Database development/uploading 3rd-Party Integration: BACnet, Modbus, LON, etc Expertise in either Script of Function Block programming-both are utilized Configuration of control systems and integration into various control product lines Remotely VPN into the customer-site and remote maintenance Integrate systems of various controlled points to local & national software Creating alarms and trends Field - being involved in Commissioning and Close-Out Field - assist on Equipment Start-Up Sometimes guiding Control Technicians OFFERED: Excellent Benefits: Medical, Dental, Vision, etc. Retirement Program: 401K w/ Match Vacation / Holiday Pay Mileage Reimbursement

Job Description About EO Solutions EO Solutions is an aerospace and defense company committed to advancing innovation in Space Domain Awareness (SDA). With locations in Las Vegas, Huntsville, and Hawaii, we design and deploy next-generation systems that support national security and global space operations. We are a fast-growing, mission-focused team that values technical excellence, integrity, and collaboration in everything we do. Position Summary EO Solutions is seeking an experienced and versatile Electrical Engineering Technician to support our SDA hardware team in Las Vegas. This role focuses on electrical assembly, integration, testing, and maintenance of complex systems, including sensors, enclosures, and ground-based infrastructure. The ideal candidate will bring strong electrical diagnostic and troubleshooting skills, with experience in control systems, wiring, and component-level testing. This position plays a key role in supporting the development and deployment of systems critical to national space domain awareness missions. Key Responsibilities Assemble, integrate, and test electrical subsystems including wiring harnesses, PCB assemblies, enclosures, and connectors Perform electrical diagnostics, functional tests, and troubleshooting of system-level components Install and commission electrical components for SDA sensor systems and supporting infrastructure Interpret and work from electrical schematics, wiring diagrams, and engineering documentation Support field deployments and perform on-site system checks, maintenance, and repairs Assist engineers in test procedures, prototype evaluations, and validation of system performance Maintain accurate build documentation and contribute to continuous improvement in electrical build processes Ensure compliance with quality standards, safety protocols, and company procedures Manage tools, electrical inventory, and test equipment in an organized and safe manner Collaborate with cross-functional teams including systems engineers, mechanical technicians, and program managers Qualifications Required: 3+ years of hands-on experience in electrical assembly, integration, or support Proficiency with wiring, soldering, crimping, and use of multimeters or oscilloscopes Experience in reading and interpreting electrical schematics and technical documentation Strong attention to detail and ability to diagnose and resolve technical issues Comfortable working in lab and field environments, including remote sites U.S. Citizenship required; must be eligible for a U.S. government security clearance Preferred: Associate degree in Electrical Engineering Technology or equivalent trade certification Experience working in aerospace, defense, or high-reliability system environments Familiarity with PLCs, control panels, or embedded system interfaces Understanding of EMI/EMC best practices in system integration Experience supporting field deployments and remote troubleshooting Travel: Occasional travel to support field installations or other EO Solutions sites Join EO Solutions and enjoy a generous salary and benefits package! At EO Solutions, we prioritize the well-being of our team members. That's why we cover healthcare, vision, and dental plans for you, your spouse, and your dependents. We also value work-life balance and encourage our employees to fully utilize their Personal Time Off (PTO) for rest and relaxation. In addition to these, we offer many other benefits and services to ensure our employees thrive both personally and professionally. Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Health insurance Health savings account Life insurance Paid time off Professional development assistance Relocation assistance Tuition reimbursement Vision insurance EO Solutions is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.