Controls technician jobs in North Carolina

* 1) Devises, selects, sets up, and operates electronic instrumentation and related electromechanical or electrohydraulic apparatus used for operational and environmental testing of mechanical, structural, or electrical equipment, and translates test data for engineering personnel to formulate engineering design and evaluation decisions: Selects, installs, calibrates, and checks sensing, telemetering, and recording instrumentation and circuitry, and develops specifications for nonstandard apparatus according to engineering data, characteristics of equipment under test, and capabilities of procurable test apparatus. * 2) Sketches and builds or modifies jigs, fixtures, and instruments and related apparatus, and verifies dimensional and functional acceptability of devices fabricated by craft or technical personnel. * 3) Performs preventive and corrective maintenance of test apparatus and peripheral equipment. * 4) Installs or directs technical personnel in installation of unit in test chamber or other test facility. * 5) Operates test apparatus during test cycle to produce, regulate, and record effects of actual or simulated conditions, such as vibration, stress, temperature, humidity, pressure, altitude, and acceleration. * 6) Analyzes and converts test data to usable form, using mathematical formulas, and prepares graphs and written reports to translate test results. * 7) May plan test program. * 8) May use computerized equipment and software to perform testing functions and produce graphs. * 9) May be designated according to equipment tested as Rocket-Control Technician; or according to nature of test as Environmental-Research Test Technician; Vibration Technician.

Job Title: Controls TechnicianJob Description As a Controls Technician, you will be responsible for troubleshooting and interpreting PLC ladder logic and electrical control systems. You will work with PLCs from various brands such as GE and Siemens, as well as robotics, servos, drives, and HMIs. Your role will involve fabricating and wiring electrical panels and terminal boxes, reading and updating electrical and pneumatic schematics, performing root cause analysis, and implementing continuous improvement solutions. Additionally, you will support preventive maintenance and strictly adhere to Arc Flash and Lockout/Tagout safety protocols. Responsibilities * Troubleshoot and interpret PLC ladder logic and electrical control systems. * Work with GE and Siemens PLCs, robotics, servos, drives, and HMIs. * Fabricate and wire electrical panels and terminal boxes. * Read and update electrical and pneumatic schematics. * Perform root cause analysis and implement continuous improvement solutions. * Support preventive maintenance. * Adhere to Arc Flash and Lockout/Tagout safety protocols. Essential Skills * Proficiency in PLC programming, troubleshooting, and automation systems. * Ability to interpret schematics and navigate ladder logic. * Strong knowledge of the National Electric Code, Ohm's Law, and Kirchhoff's Law. * 5+ years of experience in industrial electrical controls or equivalent education. Additional Skills & Qualifications * Associate degree in electronics or PLC troubleshooting preferred. * Must pass written and practical electrical tests. Work Environment This position is based at the company's largest and most advanced manufacturing site, offering several onsite amenities such as a cafeteria and gym. The work environment supports professional growth with PPE subsidies, including steel-toe shoes, free product samples, occasional giveaways, and reimbursement programs for gym and education. Job Type & Location This is a Contract to Hire position based out of Oxford, NC. Pay and Benefits The pay range for this position is $32.00 - $41.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Oxford,NC. Application Deadline This position is anticipated to close on Jan 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

2-2-3 rotating schedule 7am-7pm Ingredient Control Technicians work in the “kitchen of the plant” preparing batched product for blenders according to written procedures and customer formulas. They sanitize equipment, receive bulk materials, maintain logs, and uphold the highest of quality standards. Essential Duties and Responsibilities: Create kits according to written procedures and formulas while maintaining quality standards. Weigh “partial ingredients” according to the required amount of each raw ingredient per kit and label appropriately. Correctly document the issued quantities for every ingredient and lot number per kit Inspect for quality and accuracy of quantities on all kits. Sign-off on all completed kits prior to shipping it to the plant. Responsible for the quality, traceability and accuracy of all kits Report directly to Ingredient Control Supervisor as needed to communicate updates or modification of the kitting schedule, stock taking, Master Sanitation and additional various duties. Properly dispose of ingredient packaging materials Maintains a clean and sanitary work environment by cleaning/sanitizing equipment, kit room and warehouse. Partake in warehouse upkeep tasks. Organize raw ingredients according to the F.I.F.O./F.I.F.E. principle. Maintain ingredients to be stored according to customer specifications. Complete physical weekly and monthly inventory reports for Procurement Responsible for all Shipping and Receiving accuracy and inspection of quality of raw ingredients at the Bevan Warehouse Complete required paperwork: Manufacturing Orders, Logs, Trailer Receipts, etc. Maintain a safe and sanitary work environment according to SOP's & GMP's Transport ingredient pallets via forklift. Complete other duties as assigned within the Blending Department Other duties may be assigned. Position Requirements: High School Diploma required; One year certificate from college or technical school preferred; or three to six months related experience and/or training; or equivalent combination of education and experience. The employee must occasionally lift and/or move up to 50 pounds and frequently lift and/or move up to 25 pounds. Specific vision abilities required by this job include Distance vision, Close Vision, Color Vision, Peripheral vision, and Depth perception. While performing the duties of this Job, the employee is frequently required to stand, talk or hear, use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to sit, walk, climb or balance, stoop, kneel, crouch, and crawl.

Competencies: Communication Quality Results Driven Safety Technical Skills Supervisory Responsibilities: does not have any supervisory responsibilities. Position Summary The Specialist -Control Technician will manage and assist with PLC and automated systems troubleshooting and maintenance. The technician will also assist with installation, implementation, and troubleshooting of newly designed systems. They are responsible for managing work orders and projects. They may be responsible for delegating some workload as needed and ensure work orders are completely fully and timely. Key Responsibilities Work with the order system to manage assigned work orders Ensure assigned work orders are completed in a timely fashion Troubleshoot problems in electrical control panels, sensors, and other automation hardware Delegate work as appropriate to assistant technicians to ensure proper completion of work Manage and execute projects to ensure completion by desired deadlines Responsible for cross-departmental communication to ensure jobs are completed Respond to all necessary communications such as via email and phone calls for support across the greenhouse Maintain the operation of PLC/Argus systems, making programming changes as required Monitor PLC/Argus systems for alarms and correct issues expediently as they arise Other duties as assigned by management Minimum Qualifications Proficient in Microsoft Office (Outlook, Word, Excel). Basic knowledge of hand and power tools. Understanding of electrical control circuits and hardware (relays, contactors, overloads, switches, etc.) Experience using multimeters (voltmeter, amp meter, Megger, etc.) Ability to make minor and/or major modifications to PLC/Argus programs as requested. 1 to 3 years of experience in a similar role. Preferred Qualifications Proficient in working with PLC/Argus system software (GE, Horner, Omron, etc). Experience creating and modifying PLC/Argus programs. Ability to create HMI/SCADA system screens. Proficient in creating schematics and wiring diagrams using Microsoft Visio. Experience building control panels based off schematics and wiring diagrams. Associate's degree in electrical engineering, Automation Technology, or a related field preferred. Relevant certifications or training in PLC programming, automation systems, or electrical control systems is a plus. Job Setting & Physical Demands This position is primarily outdoors but may be required to work between locations and within an indoor office environment for administrative duties, which may require the use of computers and standard office equipment. Fluency to read, write, and understand the English language is required. Must be able to work in all outdoor elements, including dust and allergens. Position requires long-term ability for standing, sitting, squatting, bending, reaching, and twisting on a regular basis to fulfill essential duties. Candidate must have the ability to operate all machinery necessary within the department and across the facility, including but not limited to operating the table lifter and get certified and operate on internal vehicles. Candidate will also be regularly required to work at heights above 6 feet. Employee must have the ability to life 35 pounds unaided, and regularly lift up to 80 pounds with assistance. Disclaimer This job description indicates in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the Americans with Disabilities Act) expected of people assigned to this position. It is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities required of the incumbent. All employees may be required to perform activities outside of their normal job responsibilities from time to time as needed. Title VII of the Civil Rights Act protects individuals from employment discrimination based on race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age (40 or older), disability, and genetic information .

JOB TITLE: Controls Technician COMPANY: Hoffman Building Technologies STATUS: Full Time, Non-Exempt (Eligible for overtime) DEPARTMENT: Construction JOB PURPOSE: The Controls Technician will handle start up and commissioning of DDC SYSTEMS by following commissioning procedures and guidelines. Controls Technician Essential Duties and Responsibilities: ORGANIZES COMMISSIONING OF DDC PROJECTS by accepting projects from project management; analyzing commissioning workload timelines; understanding project requirements, sequence of operation, programming and system type; conferring and collaborating with other members of engineering and programming team. ENSURES PROPER SYSTEM OPERABILITY by assisting in an onsite performance verification (“Big Picture Checkout”) with the HBT engineer to verify the system is functioning as it was designed. DIRECTS ELECTRICAL SUBCONTRACTORS by prioritizing areas of completion; answering questions to assure proper installation; enforcing proper installation methods verifying proper installation. MAINTAINS PROJECT DOCUMENTATION by updating wiring diagrams and sequence changes; maintaining current DDC program and Displays; maintaining project commissioning sheets; collaborating with Project Managers and Programmers to assure that current documentation is accurately and promptly transmitted from the field. COMPLETES COMMISSIONING OF DDC PROJECTS by organizing, prioritizing and scheduling start-up assignments; coordinating with programming for needed modifications and corrections for DDC and Displays; organizing turnover to Project Manager for project close-out; following up on work results. COMMUNICATES PROJECT INFORMATION by updating Project Managers and Construction Coordinator as to construction progress; updating any project deadline information; advising as to any changes in schedule or change orders; logging daily work in a project manual or work diary. ACHIEVES FINANCIAL OBJECTIVES by cooperating with Ops management team in reviewing monthly job labor cost reports as needed; initiating corrective actions as directed. MAINTAINS INDUSTRY TECHNICAL KNOWLEDGE by attending approved educational workshops; reviewing industry publications; reviewing Dealer Intranets; maintaining knowledge on proper electrical and mechanical installation methods; reviewing product specifications and catalogs on project material. CONTRIBUTES TO TEAM EFFORT by leading by example; initiating an open and positive attitude; preparing for and attending training meetings; assisting in the training of new employees; sharing technical information with associates; accomplishing related results as needed. WILLINGNESS AND ABILITY TO TRAVEL by Cooperating and understanding the importance high profile customers with locations in multiple regions and recognizes a sense of urgency with those needs. No Phone Calls or Drop-Ins Please. EEO Employer/Vets/Disabled

Job Description HVAC Controls Technician Company: AC Corporation, a Crete United Company Pay Range: $34-$38/hour (DOE) Job Type: Full-Time | Field-Based | Travel Required AC Corporation, a Crete United Company, is actively hiring an experienced HVAC Controls Technician to join our growing Building Automation and Controls team. Based in Greensboro, NC, this is a field-focused role supporting commercial and industrial HVAC control systems, instrumentation, and VFD start-up. If you're looking to grow your expertise in Tridium, Carrier CCN, and other industry-leading systems-this is your opportunity. Key Responsibilities Troubleshoot and repair HVAC instrumentation, end devices, and control panels Loop check and assist with commissioning and system startup alongside controls programmers Install and terminate control wiring and instrumentation according to wiring diagrams and layout drawings Set up and configure Variable Frequency Drives (VFDs) Interpret electrical schematics and assist in routing conduit and cabling Travel to job sites throughout North Carolina and surrounding regions (1-2 week assignments as needed) Preferred Qualifications 3+ years of experience with Tridium Niagara programming (strongly preferred) 3+ years of experience in the HVAC service field Familiarity with Carrier, Tridium, CCN and other BAS/BMS platforms a plus Hands-on electrical installation and troubleshooting experience Strong understanding of building automation systems, HVAC controls, and system integration Comfortable working in commercial and industrial environments with minimal supervision Willingness to travel for out-of-town projects as needed What We Offer Competitive hourly pay ($34-$38/hour based on experience) Medical, dental, and vision insurance Company-paid life, short- and long-term disability insurance 401(k) with 100% company match up to 4% Three weeks of paid vacation in the first year Eight paid holidays per year Opportunities for certification training and long-term advancement Supportive work environment with local training and development opportunities at AC Corp and national resources through Crete United AC Corporation and Crete United are Equal Opportunity Employers. We welcome all qualified applicants, and proudly encourage women, minorities, and veterans to apply.

As part of the Maintenance Team you will be working to deliver solutions to improve our process reliability, product quality and plant-wide performance. Some of the duties of the instrumentation and control technician are: Consulting diagrams and technical documentation such as schematics, manuals, standards and codes; Maintaining backup and revision documentation for control systems and instrumentation; Manage SCADA type devices in an industrial based environment Installing, configuring, calibrating and maintaining control, measurement and indicating instrumentation (pneumatic, analog & digital); Configuring and programming Programmable Logic Controls (PLC) and Programmable Automation Controllers (PAC); Organize and order PLC control components in order to maintain plant process control systems. Work with corporate IT staff as required with miscellaneous network and computer activities. Must be able to prepare technical reports for documenting issues/changes to equipment. Must be able to manage projects for implementing changes and improvements. Employee must be willing to be on call to support production needs. Installing and terminating electrical, pneumatic and fluid connections; Inspecting and testing the operation of instruments and systems to diagnose faults; Removing, repairing, adjusting and replacing components; Calibrating components and systems; Assisting engineering in plant design, modification and hazard analysis; Maintaining various computer-based control systems; Performing scheduled maintenance programs; and, Keeping up-to-date with advances in technology in industry and the trade. Some of the instruments include transmitters, analyzers, sensors, detectors, signal conditioners, recorders, controllers and final control elements. They are used in industry to measure and control variables such as pressure, flow, temperature, level, motion, force and chemical composition. Successful candidates will also demonstrate the following skills and personal traits Ability to plan and prioritize tasks across multiple projects Self-motivated and highly organized with good time management skills Detail oriented work style Dedication and commitment to meeting expectations Team Player/Cooperative, yet assertive Ability to work in an often fast paced, hectic, and demanding environment Must have exceptional problem solving skills Strong verbal and written communication skills Must have proven experience in PLC logic and programming with Allen Bradley PLCs and other types of controllers. Must be able to create and read logic and flow diagrams for program design, programming, simulation and testing, and start-up Lean Manufacturing

Job Title: Maintenance Controls & IT Tech Department: Maintenance Reports To: Maintenance Manager Wage Plan/Exemption: Non-Exempt Responsibilities (Not All Inclusive): Provides on-shift support which involves programming, debugging, and problem solving of highly automated equipment and controls systems including PLCs, HMIs, electrical circuits as well as IT site management. Maintains, troubleshoots, and programs Programmable Logic Controllers (PLC's) including Allen-Bradley, Siemens; Human Machine Interfaces (HMI) and Allen-Bradley PanelView; VFD and servo drives; I/O; instrumentation. Must have knowledge of and capability to install and troubleshoot industrial automation networks (Ethernet/IP) Provides troubleshooting electrical circuits (3 phase 480 VAC, 120 VAC, 24 VAC and VDC control circuits) Must possess ability to analyze process flow to identify issues. Provides support for continuous improvement and capital projects and analyzing data to attain high equipment reliability and uptime. Provides on-shift technical support, leads troubleshooting of automated, controls and electrical systems by prioritizing internal and external customer needs to maximize productivity. Provide IT support for plant IT systems, capable of troubleshooting and working with corporate IT team and 3 rd party vendor to maintain operation of company IT system. Research solutions to technical issues and implement solutions on a timely basis. Drives performance improvement using KPIs to optimize Controls and Automation Systems using continuous improvement, root cause analysis, data analysis, and failure mode and effects analysis. Follows all Environmental, Occupational Health, and Safety, Quality, Good Manufacturing Practices (cGMP), and Cleaning and 5S standards and policies. Must be able to read, understand and modify technical documentation (electrical schematic drawings, P&IDs, and equipment manuals) Documents and communicates software and hardware changes, on-shift activities, follow-up actions, and project status using visual, verbal, written, and digital communication. Assist in developing and delivering trainings pertaining to automated processes and systems as needed for operations, maintenance, co-workers, etc. Education: Associate degree, Technical Certification, Mechatronics, or Equivalent Work Experience Strong written and verbal communication skills Proficiency utilizing Google Suite applications: Sheets, Docs, Slides, Meets, Forms, Gmail, and DrivPractical skills reading, understanding and modifying technical documentation (electrical schematic drawings, P&IDs, and equipment manuals) Physical Demands: Requires climbing, bending, kneeling and the ability to lift 50 pounds. Working Conditions: Varies. Hot, humid environment at times, as well as cold, wet conditions for up to 12-hour shift. Lift and carry up to 50 lbs. on a frequent basis, including lifting at shoulder level or higher. Lift and carry up to 100 lbs. on an infrequent basis, including lifting at shoulder level or above. Core Values: It may be an understatement to say that we work every day to uphold our company's core values. Because being a servant leader, committed to relationships, pioneering, results driven and tenacious are not just ideals we work towards. We live them. We breathe them. These values are the true essence of how we work and are in every product, service, and opportunity we offer. Servant Leader to All - Humbly listening to and serving our employees, customer, and suppliers. Committed to Relationships - Caring about the long-term well-being of our employees, customers, and suppliers. Pioneering - Using our industry knowledge and entrepreneurial spirit to connect our stakeholders to innovative solutions. Results-Driven - Having an intense desire to go beyond what is expected. Tenacious - Persevering in all that we do

At Lilly, we unite caring with discovery to make life better for people around the world. We are a global healthcare leader headquartered in Indianapolis, Indiana. Our employees around the world work to discover and bring life-changing medicines to those who need them, improve the understanding and management of disease, and give back to our communities through philanthropy and volunteerism. We give our best effort to our work, and we put people first. We're looking for people who are determined to make life better for people around the world. At Lilly, we unite caring with discovery to make life better for people around the world. We are a global healthcare leader headquartered in Indianapolis, Indiana. Our employees around the world work to discover and bring life-changing medicines to those who need them, improve the understanding and management of disease, and give back to our communities through philanthropy and volunteerism. We give our best effort to our work, and we put people first. We're looking for people who are determined to make life better for people around the world. Organization Overview: For 140 years, Lilly has manufactured medicines that improve people's lives around the world. We produce our medicines using some of the most sophisticated manufacturing technologies and rigorous quality standards. Lilly Manufacturing strives for excellence in its process, standards, procedures and behaviors to develop medicines with safety first and quality always. Lilly is entering an exciting period of growth and we are committed to delivering innovative medicines to patients around the world. Lilly is investing over $1 billion to create a new state-of-the-art manufacturing site, in Concord, North Carolina. The brand-new facility will utilize the latest technology to increase the company's manufacturing capacity in parenteral (injectable) medications, device assembly and packaging operations. This is an exciting once-in-a-lifetime opportunity to help build and operate a new site. The Lilly Concord site will be built using the latest high-tech equipment, advanced highly integrated and automated manufacturing systems, and have a focus on minimizing the impact to our environment. This is an opportunity you don't want to miss! Responsibilities: The Automation Technician - Night Shift is responsible for equipment performance, providing first-line support to production processes, as well as supporting area engineering initiatives, process improvements, project implementation, performing mechanical repairs and adjustments, and executing routine PMs. This position will require the development of expertise in production processes, commissioning, qualification, and validation requirements and equipment-specific code and/or control system technologies. The Automation Technician - Night Shift will help ensure that equipment is maintained in a qualified state, can be operated safely, and maintenance is properly performed on the systems. Key Objectives/Deliverables: Assure that operational and maintenance procedures and practices reflect safety concerns. Perform activities in accordance with cGMPs and applicable procedures. Must possess a good mechanical aptitude to troubleshoot and repair equipment while, following departmental rules and regulations. Troubleshoot the root causes of machine problems (e.g., excessive vibration or temperature, bearing failures, abnormal noises, and poor performance). Identify opportunities to improve quality using equipment performance data and by assuring maintenance is performed appropriately. Setup equipment to design specifications (e.g., timing, leveling, alignment) Operate precision alignment equipment (e.g., Roma-align, lasers, etc.) Must have the ability to quickly and accurately diagnose the root cause of a problem and implement the proper corrective actions to minimize downtime. Must accurately document the actions taken to repair the equipment in the CMMS program. Willing to assist in areas outside of their primary responsibility and learn other skills, as required Experience in instrumentation, PLC and/or HMI programming. Effectively communicate with all levels to ensure all projects and repairs are well planned and coordinated with minimal disruption to that area involved. Working with the process team, including engineers and operations personnel, participating in and sometimes leading the development of equipment design, procedures, engineering studies, and maintenance practices that will enable the process to operate as required. Seek out and identify opportunities to improve equipment operational effectiveness and reliability. Must be able to effectively use business software programs, such as, Maximo, Microsoft Outlook, Microsoft Office Suite etc. Provide technical support to engineering in: Investigating and resolving issues that create production delays Transferring knowledge of equipment capabilities and operational techniques to operators, engineering, and maintenance. Implementing tools for operations and engineering to learn and work more proficiently. Create maintenance action plans as needed to support maintenance and troubleshooting activities. Participate in periodic reviews of equipment state. Plan and execute small projects for process or equipment improvements or changes. Minimum Requirements: High school diploma/GED Qualified candidates must be legally authorized to be employed in the United States. Lilly does not anticipate providing sponsorship for employment visa status (e.g., H-1B or TN status) for this employment position Must satisfy background check and drug screening requirements. Additional Preferences: Demonstrated ability to work safely in a participative environment. Experience in a GMP manufacturing environment. Studio 5000 and Factory talk view SE programming experience. Demonstrated proficiency with Microsoft Word and Excel; proficient at typing and writing technical documents. Demonstrated ability to work independently with strong organizational skills and attention to detail and ability to adapt to rapidly changing priorities Demonstrated strong interpersonal skills and communications skills with a customer service attitude. Responsible for maintaining a safe work environment, working safely and accountable for supporting all HSE Corporate and Site Goals. Previous experience with highly automated equipment Experience with B&R platform is a plus. Knowledge of Parenteral / Packaging equipment and manufacturing operations Experience with Maximo or similar computerized maintenance management system. Other Information: Overtime may be required during shutdowns, emergency situations, or periods of heavy workloads. The Automation Technician - Night Shift will work in and around potentially dangerous and hazardous equipment, powders, liquids and gases. Safety is paramount for this position. Day Shift role currently. Will transition to a Night Shift 12-hr 2-2-3 schedule in the future. This is intended to provide a general overview of the job requirements at the time it was prepared. The job requirements of any position may change over time and may include additional responsibilities not specifically described in the . For GMP purposes, the job description should be updated for significant changes. As always, you should consult with your supervisor regarding your actual job responsibilities and any related duties that may be required for the position. Lilly is dedicated to helping individuals with disabilities to actively engage in the workforce, ensuring equal opportunities when vying for positions. If you require accommodation to submit a resume for a position at Lilly, please complete the accommodation request form (******************************************************** for further assistance. Please note this is for individuals to request an accommodation as part of the application process and any other correspondence will not receive a response. Lilly is proud to be an EEO Employer and does not discriminate on the basis of age, race, color, religion, gender identity, sex, gender expression, sexual orientation, genetic information, ancestry, national origin, protected veteran status, disability, or any other legally protected status. Our employee resource groups (ERGs) offer strong support networks for their members and are open to all employees. Our current groups include: Africa, Middle East, Central Asia Network, Black Employees at Lilly, Chinese Culture Network, Japanese International Leadership Network (JILN), Lilly India Network, Organization of Latinx at Lilly (OLA), PRIDE (LGBTQ+ Allies), Veterans Leadership Network (VLN), Women's Initiative for Leading at Lilly (WILL), en Able (for people with disabilities). Learn more about all of our groups. Actual compensation will depend on a candidate's education, experience, skills, and geographic location. The anticipated wage for this position is $21.27 - $46.88 Full-time equivalent employees also will be eligible for a company bonus (depending, in part, on company and individual performance). In addition, Lilly offers a comprehensive benefit program to eligible employees, including eligibility to participate in a company-sponsored 401(k); pension; vacation benefits; eligibility for medical, dental, vision and prescription drug benefits; flexible benefits (e.g., healthcare and/or dependent day care flexible spending accounts); life insurance and death benefits; certain time off and leave of absence benefits; and well-being benefits (e.g., employee assistance program, fitness benefits, and employee clubs and activities).Lilly reserves the right to amend, modify, or terminate its compensation and benefit programs in its sole discretion and Lilly's compensation practices and guidelines will apply regarding the details of any promotion or transfer of Lilly employees. #WeAreLilly Lilly is dedicated to helping individuals with disabilities to actively engage in the workforce, ensuring equal opportunities when vying for positions. If you require accommodation to submit a resume for a position at Lilly, please complete the accommodation request form (******************************************************** for further assistance. Please note this is for individuals to request an accommodation as part of the application process and any other correspondence will not receive a response. Lilly is proud to be an EEO Employer and does not discriminate on the basis of age, race, color, religion, gender identity, sex, gender expression, sexual orientation, genetic information, ancestry, national origin, protected veteran status, disability, or any other legally protected status. Our employee resource groups (ERGs) offer strong support networks for their members and are open to all employees. Our current groups include: Africa, Middle East, Central Asia Network, Black Employees at Lilly, Chinese Culture Network, Japanese International Leadership Network (JILN), Lilly India Network, Organization of Latinx at Lilly (OLA), PRIDE (LGBTQ+ Allies), Veterans Leadership Network (VLN), Women's Initiative for Leading at Lilly (WILL), en Able (for people with disabilities). Learn more about all of our groups. Actual compensation will depend on a candidate's education, experience, skills, and geographic location. The anticipated wage for this position is $21.27 - $41.25 Full-time equivalent employees also will be eligible for a company bonus (depending, in part, on company and individual performance). In addition, Lilly offers a comprehensive benefit program to eligible employees, including eligibility to participate in a company-sponsored 401(k); pension; vacation benefits; eligibility for medical, dental, vision and prescription drug benefits; flexible benefits (e.g., healthcare and/or dependent day care flexible spending accounts); life insurance and death benefits; certain time off and leave of absence benefits; and well-being benefits (e.g., employee assistance program, fitness benefits, and employee clubs and activities).Lilly reserves the right to amend, modify, or terminate its compensation and benefit programs in its sole discretion and Lilly's compensation practices and guidelines will apply regarding the details of any promotion or transfer of Lilly employees. #WeAreLilly

Soaring above the ordinary, the IMPACT Fly Team is a powerhouse of innovation, precision, and technical mastery. As Major Project Automation & Controls Technicians, you're the architects of efficiency-engineering smarter systems, optimizing workflows, and tackling high-stakes challenges with finesse. Whether troubleshooting on-site or designing groundbreaking solutions, this elite squad is always ready to fly in, fix, and revolutionize. Ready to take your expertise to the next level? Because IMPACT is more than a name-it's a mission. 🚀 What we offer Competitive salary Paid vacation/holidays/sick time - 10+ days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Extensive product and on the job/cross training opportunities With outstanding resources Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us Out: A Day in a Life at Johnson Controls: What you will do As a senior level team member of the iMPACT Fly Team, you will be responsible for traveling 75-100% of the time to and assisting JCI Customers at all levels of building automation system programming, checkout and commissioning. This will include validating hardware and software commissioning activities for building automation systems. You will need to apply your advanced HVAC & Building Automation experience to work on assigned projects. You will work directly on multiple project teams to assist the Project Managers and Field Technicians. How you will do it Loads system-level controller software Performs advanced commissioning and system diagnostics from system-level controllers to end devices (such as: sensors, actuators, etc.) and completes all required commissioning documentation Keeps management and JCI contractor or customer informed of job progress and issues Calibrates systems requiring basic electronic test equipment Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation Documents changes and provides information for as-built documentation Communicates with the JCI contractor or customer upon arrival and before leaving the work site Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety. What we look for Advanced computer skills (Metasys preferred) Advanced knowledge of electrical testing and commissioning tools Strong documentation acumen Good communication and listening skills Advanced knowledge of mechanical HVAC systems Low voltage/120-volt wiring skills preferred A valid driver's license, with no major or frequent traffic violations HIRING HOURLY RANGE: $31- $42 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at *************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Why Mosquito Hunters: Company Vehicle (gas covered by us) Flexible Scheduling Work well around part-time jobs and online or part-time classes Autonomous environment - freedom to work solo in the field Work outdoors (Seasonal work April through September) Bonus pay opportunities are available Flea, tick, and mosquito focused treatments (outside only) SEASONAL EMPLOYMENT April through September This is a great opportunity to make some money while learning how to provide a much needed service. After 2 weeks of paid training, you'll be assigned a company vehicle to use while doing your scheduled service calls. You'll spend the day outside, on your own, as your own boss. We service craven, Carteret, and Pamlico counties. No prior experience is required. You must have your own transportation to and from our office in New Bern, a valid drivers license, integrity, and a positive attitude. Company OverviewOur goal is to provide excellent customer service and help to improve people's quality of life. Great customer service starts with happy employees, which is why we offer flexible scheduling and competitive pay. Women are encouraged to apply, as we are a woman owned company. Responsibilities Represent the company and maintain a high level of customer service Drive to each client's home or business Conduct property surveys Apply control products using a motorized backpack sprayer Track supply inventory and inform when products need to be ordered Efficiently navigate the service software and input necessary data Communicate with customers Some marketing assignments Keep vehicle clean and organized Qualifications be at least 21 years old have a valid driver's license be able to lift a minimum of 40 lbs be hardworking & reliable possess excellent communication & customer service skills be comfortable working independently Candidates with the following experience are encouraged to apply: Pest control Lawncare & landscaping Outdoor Labor & home services Customer Service Veterans Police, fire, and first responders Drivers FedEx, UPS, DHL Amazon warehouse, or drivers College Students Someone seeking a 2nd job (flex schedule) Gig workers (Uber, Lyft, Postmates) Anyone who enjoys working outdoors (Arborist, Lawn Care, Painters) Personal trainers Sales or retail Compensation: $20.00 - $30.00 per hour Mosquito Hunters takes pride in providing a foundation upon which driven and conscientious, budding professionals may develop their careers. At Mosquito Hunters, we're not just hunting skeeters; we're BUILDING LEADERS. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchisee, and not to Pest Hunters Corporate.

Job Details Division: Nucor Rebar Fabrication Southeast Other Available Locations: N/A Welcome to Nucor, where our unique culture sets us apart. Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering unmatched career opportunities and stability. We are known for our innovative sustainability practices and are the continent's largest recycler. Our vibrant culture, built on personal connections and teamwork, empowers every team member with the freedom to innovate and contribute to our collective success. Experience a workplace where safety, efficiency, and meaningful personal connections define every day, enriching both our teammates and the communities we serve. Nucor supports its teammates with top-tier benefits like Medical, Dental, Vision, and Disability Insurance, 401K and Roth accounts, Profit sharing, Pay-for-performance bonuses, Paid parental leave, Tuition reimbursement, Stock program, Scholarships and more. Basic Job Functions: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Nucor Rebar Fabrication is ready to build a world-class team as part of the launch of Nucor's newest bar mill in Lexington, NC. Our fabrication shop will feature state-of-the-art machinery in a 100,000-square foot facility nestled in the beautiful scenery of Lexington, NC. Located just 20 miles from the vibrant hub of Winston-Salem, Lexington offers abundant recreational opportunities including fishing at High Rock Lake, hiking, and of course, BBQ! Lexington is the BBQ capital of the world, with 20 delicious BBQ restaurants to choose from - bring your appetite! Purpose: The Automation Engineer is responsible for collaborating with Maintenance and Production teams to maximize safety and optimize Nucor Rebar Fabrication processes. Responsibilities:• Training team members across locations to support consistent performance and knowledge sharing.• Using engineering principles, algorithms and techniques to trouble shoot and improve both the process and equipment.• Developing and implementing improvement plans involving both hardware and software systems.• Providing support outside of normal business hours as needed, including flexible scheduling for unscheduled and scheduled overtime, weekends, and holidays.• Assisting with regional maintenance initiatives and supporting cross-site collaboration.• Adapting to evolving responsibilities as assigned by the area Supervisor/Manager in response to operational needs.• Traveling regularly to other regional NRF locations to identify improvement opportunities, resolve issues, and share best practices.• Perform other duties as assigned by supervisor. Minimum Qualifications: Bachelor's Degree in Process, Electrical, Automation Engineering or related field OR 2 years of industrial maintenance and automation experience Preferred Qualifications: Preferences: aSa software experience 2 - 3 years of experience in a reinforcing steel fabrication environment Physical Demands: Some heavy lifting (up to 50 lbs.) may be necessary Working conditions can be noisy/ dusty/ hot/ cold Special Demands: Due to the operating conditions of the position, this is a safety-sensitive position Frequent travel to regional branches Nucor is an Equal Opportunity/Affirmative Action Employer - M/F/Disabled/Vets - and a drug - free workplace

We are seeking a skilled and motivated Mechatronics Technician to support the production of HV and Pad-mount Distribution Transformers in a highly automated manufacturing environment. This role is critical to ensuring uptime and performance of advanced electromechanical systems, including robotics, CNC machinery, and automated assembly lines. You will collaborate closely with engineering, quality, and production teams to perform preventive maintenance, system diagnostics, and real-time troubleshooting, ensuring safety, quality, and throughput targets are consistently met. Key Responsibilities: Operate, monitor, and adjust automated machinery, robotic arms, and CNC equipment used in transformer manufacturing and testing. Conduct preventive and predictive maintenance on electromechanical systems to reduce unplanned downtime. Diagnose and troubleshoot mechanical, electrical, pneumatic, and control system faults using schematics, PLCs, and HMIs. Perform inspections and calibrations to maintain quality and performance standards. Interpret technical documents including electrical schematics, mechanical drawings, and control system logic. Collaborate with engineering, production, and quality assurance teams to support process improvements and product integrity. Maintain accurate logs of maintenance activities, machine performance, and production outputs using digital systems or CMMS. Actively follow all OSHA, NFPA-70E, and company safety standards. Participate in continuous improvement initiatives, including TPM, Lean, or Six Sigma projects as assigned. Qualifications: Education / Training Required: Certificate or Associate Degree in Mechatronics, Electromechanical Technology, Industrial Maintenance, or related field. Preferred: Advanced coursework in PLC programming, robotics, or control systems. Technical Skills Proficiency with PLCs (Allen-Bradley, Siemens), sensors, actuators, and industrial robotics. Ability to read and interpret electrical schematics, mechanical blueprints, and P&IDs. Familiarity with HMI interfaces, motion control systems, and basic ladder logic. Basic understanding of CNC programming, servo systems, and networked machine communication is a plus. Experience Preferred: 1-3 years in an advanced manufacturing, automation, or electromechanical maintenance environment. Experience in transformer, power systems, or high-voltage component manufacturing is a strong asset. Physical & Work Environment Requirements Ability to stand, walk, bend, and lift up to 50 lbs for extended periods. Work may involve exposure to noise, moving mechanical parts, and occasional hot/cold environments. Must wear PPE and follow all safety protocols in industrial environments. What We Offer: Competitive pay aligned with market benchmarks for Mechatronics Technicians in North Carolina. Comprehensive benefits: medical, dental, vision, 401(k) with match, paid time off. Ongoing training in automation systems, robotics, and process improvement. Opportunity for growth into Senior Technician, Automation Specialist, or Maintenance Leadership roles.

Apply now " Job Type: Long-term / Regular QC Instrument Metrologist - (30187) At Guerbet, we build lasting relationships so that we enable people to live better. We are a global leader in medical imaging, offering an extensive portfolio of pharmaceuticals, medical devices, as well as digital and AI solutions for diagnostic and interventional imaging. As a pioneer in contrast products for the last 95 years, we continuously innovate. Customer centricity, Cooperation, Audacity, Focus, and Responsibility are the values that we share and practice. For more information on Guerbet, go to *************** and follow Guerbet on LinkedIn, X, Instagram, and YouTube. Summary of the position: We are seeking a highly skilled QC Instrument Metrologist to join our Quality Control team. This role is responsible for the qualification, calibration, maintenance, and lifecycle management of analytical instruments in a GMP-regulated laboratory environment. The ideal candidate will ensure instrumentation compliance with regulatory standards, minimize equipment downtime, and uphold data integrity across QC operations. This is an on-site position at our Raleigh, NC site. Essential Functions & Responsibilities: * Supervise day-to-day activities related to QC Instruments, including Scheduling calibrations, PM's and troubleshooting tasks. * Ensure all QC Instruments are qualified, calibrated and maintained in accordance with SOPs and GMP requirements * Lead and support Instrument qualifications (IQ/OQ/PQ) requalification and decommissioning * Serve as a liaison with vendors, repairs and qualifications support * Manage and maintain instrument documentation such as calibration records, usage logs and deviation reports * Lead or support investigations related to equipment failures, data integrity or OOS results to instrument performance. * Support change controls, deviations, CAPA's and other quality systems documentation relevant to Instrumentation * Train and mentor QC analysts in proper Instrument use troubleshooting and care * Participate in audits and regulatory inspections; provide instrument-related information and documentation as needed * Collaborating with IT and validation group on computerized system validation and data integrity compliance * Identify and implement continuous improvement opportunities related to Instrumentation or workflow Education, Experience, and/or Skill: * Bachelor's degree in chemistry, Biochemistry, Engineering, or a related scientific field. * Minimum 5 years of laboratory experience, including 2+ years in instrumentation roles. * Strong knowledge of laboratory instruments (e.g., HPLC, FTIR, UV-Vis, TOC, Karl Fischer, Isolator, KTA). * Familiarity with GMP, 21 CFR Part 11, USP , and data integrity principles. * Experience with instrument qualification protocols (IQ/OQ/PQ) and validation. * Proficiency in quality systems including deviations, CAPAs, and change controls. * Excellent organizational, communication, and problem-solving skills. EQUAL EMPLOYMENT OPPORTUNITY Guerbet is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant based on race, color, religion, national origin, sex, age, disability, veteran or military status, genetic information, pregnancy or any other legally recognized protected basis under federal, state, or local law. The information collected by this application is solely to determine suitability for employment, verify identity, and maintain employment statistics on applicants. Applicants may be entitled to reasonable accommodation due to disability, pregnancy or related medical condition, or a sincerely held religious belief. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing an undue hardship on Guerbet. Please inform the company's personnel representative if you need assistance completing this application or to otherwise participate in the application process. Guerbet will not discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. Why Guerbet? * 4 weeks of PTO * Insurance benefits start date of hire * Competitive 4% 401K match + 2% profit sharing contribution * Tuition reimbursement program for ongoing education * Paid time off for select volunteer opportunities

Job DescriptionJob Title: Electromechanical Technician- Up to $36.16/hour! Follow procedures to perform required PM programs and general maintenance tasks including electrical, mechanical, pneumatic and hydraulic repairs Read and interpret electrical, mechanical, pneumatic and hydraulic schematics for troubleshooting and repair of all plant equipment Use and troubleshoot variable speed AC and DC drive controllers. Understand servo motion controls, incremental and absolute position encoders and resolvers Analyze and repair PLC controlled equipment using the appropriate techniques and peripheral equipment Conduct root cause failure analysis and use problem solving techniques to ensure effective repairs on equipment Work to continuously improve the machines and the standardized procedures used to maintain them. Core Skills and Qualifications: High school diploma or equivalent required. Minimum two years' experience as an Electromechanical Technician. Strong electrical and mechanical troubleshooting experience required. Technical/vocational training and/or associate's degree preferred. Previous PLC experience with a working knowledge of Allen Bradley and/or Siemens PLCs. Must be a team player, have great communication skills and be flexible to accomplish the necessary tasks. Demonstrated ability to maintain accurate records, logs and files in a timely manner. About Spark Packaging: Spark Packaging is a Michigan-headquartered recruiting and staffing company that connects great talent with great employers. We understand that finding a new position can be stressful and identifying top talent can be challenging. For us to maximize successful placement and retention, we start by listening to and understanding each of our clients. We believe in face-to-face interaction and having a solid understanding of our client's business before placement. We pride ourselves in team development as it matches our purpose as an organization to continually create career opportunities.

2nd Shift Senior Millwright / Electromechanical Technician The Senior Millwright / Electromechanical Technician is responsible for safely and efficiently troubleshooting, repairing, and maintaining plant machinery and equipment. This role plays a key part in ensuring optimal production performance through both preventive and emergency maintenance activities. Key Responsibilities Maintenance Perform scheduled and emergency repairs of production equipment to minimize downtime. Prepare and set up machinery for scheduled production runs. Troubleshoot and repair mechanical, electrical, pneumatic, and hydraulic systems on packaging and production machines. Conduct preventive maintenance (PM) on all plant equipment. Read and interpret technical manuals, blueprints, and work orders to complete required maintenance tasks. Safely operate mobile equipment such as forklifts, front loaders, telehandlers, skid steers, man lifts, and yard/jockey trailers. Perform other related duties as assigned. Quality Ensure all current quality assurance measures are followed and communicated effectively to supervisors, production staff, drivers, and customers. Assist in the development and implementation of new maintenance and quality procedures as needed. Safety and Administration Comply with all OSHA Safety and Health regulations. Maintain a clean, safe, and organized maintenance work area. Communicate effectively with supervisors and fellow maintenance personnel. Administer and enforce company maintenance policies. Conduct safety-related tests and inspections to meet regulatory and insurance requirements. Participate in monthly safety meetings and continuous improvement initiatives. Physical Requirements Ability to lift 2550 lbs. regularly. Ability to respond quickly to sounds and safety cues. Capable of working safely in confined spaces or on uneven terrain. Comfortable working in varying weather conditions. Must correctly wear personal protective equipment (PPE) at all times. Other Duties Support the Maintenance Supervisor and Manager with ongoing projects and plant improvement initiatives. Qualifications High School Diploma or Technical Degree required. Minimum of 10 years of industrial maintenance experience in a manufacturing environment. Strong organizational and troubleshooting skills. In-depth knowledge of hydraulic, pneumatic, and electrical systems. PLC programming and troubleshooting experience preferred. Working Place: Laurinburg, North Carolina, United States Company : 2025 Nov 6th Virtual Fair - AWF

* 1) Devises, selects, sets up, and operates electronic instrumentation and related electromechanical or electrohydraulic apparatus used for operational and environmental testing of mechanical, structural, or electrical equipment, and translates test data for engineering personnel to formulate engineering design and evaluation decisions: Selects, installs, calibrates, and checks sensing, telemetering, and recording instrumentation and circuitry, and develops specifications for nonstandard apparatus according to engineering data, characteristics of equipment under test, and capabilities of procurable test apparatus. * 2) Sketches and builds or modifies jigs, fixtures, and instruments and related apparatus, and verifies dimensional and functional acceptability of devices fabricated by craft or technical personnel. * 3) Performs preventive and corrective maintenance of test apparatus and peripheral equipment. * 4) Installs or directs technical personnel in installation of unit in test chamber or other test facility. * 5) Operates test apparatus during test cycle to produce, regulate, and record effects of actual or simulated conditions, such as vibration, stress, temperature, humidity, pressure, altitude, and acceleration. * 6) Analyzes and converts test data to usable form, using mathematical formulas, and prepares graphs and written reports to translate test results. * 7) May plan test program. * 8) May use computerized equipment and software to perform testing functions and produce graphs. * 9) May be designated according to equipment tested as Rocket-Control Technician; or according to nature of test as Environmental-Research Test Technician; Vibration Technician.

We are searching for an HVAC Controls Technician. Troubleshoot and determine the need for repairs or replacement of instrumentation and end devices. Loop check and provide commission start-up assistance to a programmer. Set-up and start Viable Frequency Drives (VFD's). Install and terminate instrumentation per layout drawings and wiring diagrams Qualifications Minimum of 3 years of experience in programming Tridium HVAC controls systems preferred Minimum of 3 years of experience in HVAC service field preferred Carrier CCN and i-Vue experience a plus Electrical experience including routing of conduit and ability to read electrical schematics a plus Must be willing to travel to out of town job sites and occasional extended stay periods (usually 1 to 2 weeks) What We Offer Supportive work environment Opportunity to learn additional skills as well as upward mobility Eight paid holidays Three weeks of vacation first year Company paid life insurance, short and long term disability 401(k) match of 100% up to 4% AC Corporation is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Be part of the future! We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people - you bring your talent, and we'll give you the space and opportunities to grow and succeed. We are committed to make a difference. Work with an Award-Winning technology that delivers sustainability, safety, and health. What we offer: Competitive Starting Pay On the Job Paid Training Tuition Reimbursement Global Advancement Opportunities with Unlimited Career Path Company Vehicle (as applicable) Referral Bonuses Comprehensive Benefits Medical/Dental/Vision insurance Health Savings Account (HSA) Life Insurance 401(k) savings plan with company match Short-Term and Long-Term Disability Employee Assistance Program Wellness Program And More! What you will do Perform HVAC Control systems programming, troubleshooting, installation, commissioning, and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components. Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment. Provide front line technical and repair support through effective communications with Johnson Controls customers. Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers. Be part of an expanding team of the best technicians in the industry while you build career with a first-class global organization. How you will do it Loading Johnson Controls field and network level controller software. Performing commissioning and system diagnostics for all levels of system controllers as well as end devices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation. Keeps management and JCI contractor or customer informed of job progress and issues. Calibrates systems requiring basic electronic test equipment. Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation. Documents changes and provides information for as-built documentation. Execute company sponsored as well as personally initiated training to insure the highest level of knowledge and capability are maintained Engage with customers to fully understand their systems and needs. Communicates with the JCI contractor or customer upon arrival and before leaving the work site. Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety. What we look for Required: 2-4 years experience with BAS, Honeywell, Siemens , Tridium , Trane, Automated etc... Strong understanding of HVAC systems, sequence and applications Demonstrated technical aptitude in mechanical and electro-mechanical fields Able to use hand, power tools and electrical testing equipment such as a multi meter. Solid knowledge base in use of personal computers. Attention to detail. Good communication and listening skills. HIRING HOURLY RANGE: $24- $34(Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.