Controls technician jobs in Portsmouth, VA - 190 jobs

Specific Accountabilities Controls Technician / Industrial electrician with electronic and mechanical level experience in a food manufacturing environment. Some formal electrical/instrumentation education preferred. Electrical, electronic, pneumatic & mechanical knowledge, comprehension, and skills. AC/DC control circuits PLC Troubleshooting Ladder logic knowledge and basic programming skills Must have or be able to obtain a passport VFD's 120v, 240, 480v single and three phase power circuits 24v and 120v control circuits Use of hand tools, Multi-meters Analog & Digital, ammeters, amp probes etc. Work from manuals, prints schematics: basic skills in math & reading Good communication Skills, basic computer skills Planning and organizing skills Knowledge of programmable logic controllers (PLC)- Allen Gradley PLC 5, SLC 500- Siemens Job Specifications Ability to read, speak clearly, and understand detailed written and verbal instructions given in English. High school diploma or GED Three or more years of related mechanical experience and/or specific hydraulic, pneumatic or electrical training required. Ability to calculate figures and amounts such as percentages, area, circumference, and volume and apply concepts of basic algebra and geometry. Ability to solve practical problems and deal with a variety of concrete variables in situations. Must be able to follow standardized written directions. Must demonstrate ability to interpret a variety of instructions furnished in written oral, diagram, or schedule form. Required to stand, walk, use hands to finger, handle or feel; and smell. Frequently required to sit and talk or hear. Occasionally required to reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Must occasionally lift and /or move up to 50 pounds. Must have specific vision abilities to include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Physical Demands The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to walk, sit, talk, listen, reach with hands and arms, bend, squat and climb (ladders). The employee is required to use hands to handle, operate, feel objects, tools or controls. The employee must occasionally lift, push/pull and/or move up to 20 lbs. Work Environment The plant work environment will expose the employee to loud noise, food grade dust & odors, moving & vibrating machinery, heavy equipment, powered industrial trucks, heights, traffic, anhydrous ammonia, oil, electricity. The employee may be exposed to adverse weather conditions including extreme cold (50 degrees F), heat (80 degrees F), rain, snow, dust, smoke and odors. Allergens found inside the plant include: fish, shellfish, nuts, eggs, wheat, soy, milk and coconut. All applicants will receive consideration for employment without regards to race, color, national origin, age, sex, sexual orientation, disability, veteran, or marital status, genetic information or other protected status, covered by federal, state or local law. Equal Opportunity/Affirmative Action Employer

HVAC Controls Technician - Chesapeake, VA - Controls-Only Company HVAC Controls Technician RESPONSIBILITIES: Well versed in installations, troubleshooting, repairing HVAC control systems and equipment Responsible for startup, commissioning, and servicing of air conditioning equipment Knowledge of HVAC VRF system service and service installations Extensive knowledge in chiller plants, boilers, air handlers, VAV's and rooftop units Strong understanding of commissioning protocols and point to point check outs Work closely with controls installations and start up/termination of equipment and programs Perform any preventative maintenance, replacements, or modifications as needed. Communicate efficiently with building owners as well as owner COMPANY INFO: Founded over 30 Years ago. Clients include: Colleges/Universities, Healthcare, Commercial Buildings, Educational Facilities, Private Offices. Mix of Retrofit, Service, Design-build/New Construction. Work/Services: Building Automation, HVAC Services, Security, Energy Services OFFERED Competitive Compensation 401K with Match Vehicle, Cell phone, Gas Card Medical, Dental, Vision Vacation & Holiday

The Controlled Environment Technician I is responsible for certifying, testing, and maintaining Clean Rooms, hoods, and infusion centers in pharmacies, laboratories, and hospitals nationwide. This role involves national travel to service accounts, utilize job scheduling systems, provide customer service, and report on equipment performance. Essential Job Functions: Verify and certify Clean Rooms, Biological Safety Cabinets, Laminar Flow Hoods, Fume Hoods, and other controlled environment equipment for MTA accounts. Travel nationally to test, certify, and maintain/repair controlled environment equipment. Use Field Aware system for job scheduling, tracking, and time reporting. Utilize MS Excel for mathematical computations for customer reporting. Deliver high-quality customer service and reports on equipment performance. Report daily activities and field issues to the support center. Pass leads to Sales Representatives. Adhere to safety regulations and maintain clean work areas. Wear proper safety garments. Maintain the vehicle and equipment professionally. Diagnose problems, replace/repair parts, test, and make adjustments. Other duties as assigned by management. Physical Demands: Lift up to 50lbs. Overhead work. Carry equipment, climb ladders, sit, stand, lift, bend, hold equipment, and drive for extended periods. Position Type/Expected Hours of Work: Full-time position, typically Monday-Friday with variable hours based on job/facility requirements. Some nights, weekends, and overnight travel may be required. Travel: 75% or more travel required, with possible overnight stays. Qualifications: CETA, NEBB, or NSF certification preferred (not required initially). Obtain industry certifications within 2-3 years. Background in air balancing, biomedical, pharmaceutical, HVAC, environmental testing, and clean rooms preferred. 1-3 years of prior experience as a Field Service Technician. Strong mathematical, mechanical, and electrical aptitude. Basic computer skills and experience with Microsoft applications. Detail-oriented, proactive, with a passion for quality and accuracy. Highly organized, exceptional customer service skills, professional appearance, and behavior. Ability to travel, work flexible hours, and adjust schedules to meet customer needs. Commitment to the company's core beliefs of integrity, safety, and customer service. Disclaimer: The job description outlines general content and requirements, not exhaustive duties. Management may assign or reassign duties at any time. Reasonable accommodations may be provided for individuals with disabilities.

Starship Technologies is revolutionizing deliveries with autonomous robots. These robots are designed to deliver food, groceries, and packages across college campuses and neighborhoods in minutes. Starship has now completed millions of autonomous deliveries to date, traveled millions of miles and is currently doing more than 140k road crossings each day. Our contribution to society includes reducing congestion, and pollution, providing zero-emissions deliveries, increasing the quality of life for residents, empowering seniors and disabled people, and enabling affordable delivery for local businesses. We're hitting records on an almost weekly basis. Now is an exciting time to join as we grow rapidly around the world! The environment will be similar to a fast-paced restaurant/workshop while allowing you to plunge into a cutting-edge technological environment working directly with our autonomous robots. Our Robot Technicians will execute robot fleet repair throughout the shift, troubleshoot unexpected situations that may arise, and work effectively to keep our robots in operation. Job Responsibilities: Technical Tasks: * Maintaining the health of our global fleet of robots through daily maintenance and repair tasks. Which can include but is not limited to - diagnosing unforeseen problems, troubleshooting equipment malfunctions, and repairing or replacing faulty equipment (tires, electronics, motors). * Carrying out preventive maintenance activities and upgrades on robots and infrastructure. Monitoring and servicing our internal systems, running tests and completing reports, and completing updates or improvements to existing systems as appropriate. * Perform root cause analysis to identify the causes of faults or problems and systematically develop a solution to prevent/solve underlying issues. Operational Tasks: * Accurately document all tasks/partner or internal messaging related to service concerns or robot-related issues using appropriate applications/tools. * Maintain a clean and organized hub by performing accurate spare parts inventory audits twice a week and ensuring all tools are accounted for and returned to their proper location after use. * Work with our engineering team to identify any potential improvements regarding robot health and design. * Assist our Operational Team and vendors/merchants by providing in-person assistance through performing weekly Merchant Preflights to understand any service-related issues, provide operational and troubleshooting assistance related to Starship-provided devices, and act as a Starship brand representative while interacting with clients. * Occasionally support our Operational Service team by assisting with Robot field rescues or operational services tasks when needed. * Other duties as assigned. Minimum Qualifications: * A passion for robots and innovative technologies. * Currently pursuing a degree in Engineering or another related STEM field. * Previous experience in Technical Support and with any service desk application is beneficial, but not required. * Good knowledge regarding mechanics, electronics, and IT. * Excellent client-facing skills. * Self-starter; takes initiative, can work without supervision and begin projects independently. Experience & Education Requirements: * Knowledge of Unix/Linux systems, CLI tools, and scripting preferred, but not required. * Hobby projects in electronics or mechanics. * Previous experience in managing a large fleet of devices. Physical Requirements: * Movement ability to frequent usage of wrists, hands and finger dexterity to movements such as constant typing, as well full-body exertion while wrangling the robot fleet. * Occasional lifting of items with weight up to 70 lbs. * Comfortable riding an ebike on various terrain. What's in it for you? * Opportunity to work on industry-leading self-driving delivery robot technology on a uniquely large scale, creating history and making things happen * You can immerse yourself in the world of technology and innovation * You will have a chance to work with people with a strong inner burning and motivation. We are self-aware and seek feedback and improvement. We don't want to wait until we are told what needs to be done but take it as a matter of pride to figure out solutions for topics in various teams and areas * You'll have endless opportunities to learn from our inspirational, talented team members across the globe Ready to join our Starship fleet? Apply today! Job Type: Full-time with flexible hours Only candidates who send resumes will be considered. Please include your availability when applying. Early application is encouraged. Check out our website to find out more about us: ************************ Department Service Locations Norfolk, VA Employment type Full-time

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

**Engineering Tech I** The purpose of this position is to design and prepare timely, safe and cost-effective natural gas infrastructure improvements including system replacements, relocations due to state, municipal, and private entity construction conflicts, system reinforcements, and system expansions for Virginia Natural Gas. Designs include applicable CAD drawings, permits, and cost estimates for system improvements which may include bridge attachments, railroad crossings and directional bore operations. The incumbent also coordinates customers & requirements with the various departments and other prevailing authorities. Position will reside at the Virginia Natural Gas corporate headquarters in Virginia Beach, VA. **Functional Expertise:** + Provide quality control of geospatial data and mapping products + Researches facility records in GIS and project as-builts + Draft city, state and railroad right-of-way permits and traffic control plans as required. **Business Acumen:** + Analyze construction proposals for DOT, municipal, and private projects for conflicts with existing gas utilities and propose recommendations to resolve conflicts + Develop timely and accurate cost estimates for construction projects, new gas main installations, plastic and steel main replacements, reinforcements and other system support projects as required **Engagement:** + Collaborates with engineers, construction, and operations to produce effective drawings + Collaborates on facility relocations with outside parties including county, municipal and state government representatives, road contractors and developers + Meet and negotiate with city and state officials, engineers, and construction contractors to resolve conflicts in a timely manner and relay Company policy, procedure, and other information relative to the gas industry + Influence customer satisfaction by responding to customer needs, keeping customers informed and ensuring work is scheduled in an effective manner **Driving Results:** + Create construction designs using MicroStation, AutoCAD, GIS and other applications + Monitors projects to ensure on-time delivery of plans to state, county and municipal authorities + Create a project AFE for design and prepare internal documents including ARM BCA/PWR + Ensure that compliance with all engineering principles, gas operating standards, local code, state and federal rules, regulations, mandates and statutes is maintained by preparing and/or revising designs as necessary for all gas facilities installed **Education and Experience:** **Required:** + BA/BS year degree with 3 years work related experience + Knowledge of natural gas distribution system facilities **Preferred:** - Some level of GIS, engineering, or technical education or experience Or Equivalent academic education and experience **Skills:** **Required:** + Valid driver's license + Drafting ability - advanced proficiency + One or more industry standard CAD Packages (MicroStation, AutoCAD, TurboCAD etc) - advanced proficiency + Work Prioritization - advanced proficiency + Ability to read, interpret and apply engineering and architectural plans - intermediate proficiency + Excellent interpersonal communication skills + Mathematical aptitude - intermediate proficiency + Proficiency with variety of GIS concepts, practices, and procedures + MS Excel, Word and PowerPoint - intermediate proficiency + ArcGIS - basic proficiency + ARM - basic proficiency **Certifications/Licenses:** **Preferred:** - GIS Certification **Working Conditions/Physical Requirements:** + The incumbent works in an office environment with a hybrid schedule, 4 days per week with 1 remote day from home, and subject to change as business needs dictate. + The incumbent may/will be exposed to varying outdoor weather conditions. + The incumbent may/will be exposed to construction related activities + This position occasionally requires prolonged standing or walking. + This position occasionally requires the incumbent to reach above shoulder-level. + This position occasionally requires the incumbent to bend, kneel, crouch, or crawl. + This position requires the ability to lift up to 25 pounds. + Local travel. + Keyboarding required in approx. 80% - 100% of daily tasks Disclaimer: This information describes the general nature and level of work performed by employees in this job. The description is not designed to be a comprehensive inventory of duties, responsibilities, and qualifications required of employees in the job. Reasonable accommodation may be made to qualified disabled individuals for the performance of essential duties and responsibilities. **About Southern Company Gas** Southern Company Gas is a wholly owned subsidiary of Atlanta-based Southern Company (NYSE:SO), America's premier energy company. Southern Company Gas serves approximately 4.2 million natural gas utility customers through its regulated distribution companies in four states and approximately 600,000 retail customers through its companies that market natural gas. Other nonutility businesses include investments in interstate pipelines and ownership and operation of natural gas storage facilities. For more information, visit southerncompanygas.com . Southern Company (NYSE: SO ) is a leading energy provider serving 9 million customers across the Southeast and beyond through its family of companies. Providing clean, safe, reliable and affordable energy with excellent service is our mission. The company has electric operating companies in three states, natural gas distribution companies in four states, a competitive generation company, a leading distributed energy solutions provider with national capabilities, a fiber optics network and telecommunications services. Through an industry-leading commitment to innovation, resilience and sustainability, we are taking action to meet customers' and communities' needs while advancing our goal of net-zero greenhouse gas emissions by 2050. Our uncompromising values ensure we put the needs of those we serve at the center of everything we do and are the key to our sustained success. We are transforming energy into economic, environmental and social progress for tomorrow. Our corporate culture has been recognized by a variety of organizations, earning the company awards and recognitions that reflect Our Values and dedication to service. To learn more, visit *********************** . Southern Company invests in the well-being of its employees and their families through a comprehensive total rewards strategy that includes competitive base salary, annual incentive awards for eligible employees and health, welfare and retirement benefits designed to support physical, financial, and emotional/social well-being. This position may also be eligible for additional compensation, such as an incentive program, with the amount of any bonus/awards subject to the terms and conditions of the applicable incentive plan(s). A summary of the benefits offered for this position can be found here **************************************************** . Additional and specific details about total compensation and benefits will also be provided during the hiring process. Southern Company is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law. Job Identification: 16192 Job Category: Engineering Job Schedule: Full time Company: Virginia Natural Gas

HVAC Truck Based Senior Controls Technician What you will do Perform HVAC Control systems programming, troubleshooting, installation, commissioning and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components. Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment. Provide front line technical and repair support through effective communications with Johnson Controls customers. Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers. Be part of an expanding team of the best technicians in the industry while you build career with a first-class global organization. How you will do it Loading Johnson Controls field and network level controller software. Performing commissioning and system diagnostics for all levels of system controllers as well as end devices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation. Keeps management and JCI contractor or customer informed of job progress and issues. Calibrates systems requiring basic electronic test equipment. Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation. Documents changes and provides information for as-built documentation. Execute company sponsored as well as personally initiated training to insure the highest level of knowledge and capability are maintained Engage with customers to fully understand their systems and needs. Communicates with the JCI contractor or customer upon arrival and before leaving the work site. Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety. What we look for Required: Strong understanding of HVAC systems, sequence and applications Demonstrated technical aptitude in mechanical and electro-mechanical fields Able to use hand, power tools and electrical testing equipment such as a multi meter. Solid knowledge base in use of personal computers. Attention to detail. Good communication and listening skills. HIRING HOURLY RANGE: $24.52-$30.29 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** #techhiring Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations.Responsibilities Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness Provide technical support and training to field technicians and end-users as needed Qualifications Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems Familiarity with autonomous systems, marine navigation, and control systems is preferred Strong analytical and problem-solving skills with attention to detail Experience working with the DoD or government contracts is a plus Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands Ability to perform physically demanding work for extended periods of time, up to 12 hours/day Frequently and repetitively, lift, push and carry up to 20 lbs. The ability to carry 20 lbs. up and down stairs Ability to work outside for an extended period of time Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day Climb and maintain balance on ladders, platforms, or other high structures Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time Exposures to hazardous materials and ability to follow waste handling/disposal procedures Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3) . Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

Job DescriptionDescription: TRISTAR is seeking highly skilled Engineering Technician VI to join our team supporting our government customer in Norfolk, VA. This role offers an exciting opportunity to work at the forefront of technical operations, ensuring seamless communication and coordination between the contractor and the Fleet Readiness Coordinator. The successful candidate will play a vital role in supporting technical activities related to the contract and will provide leadership and guidance to the technical workforce. Key Responsibilities: Serve as the primary point of contact between the contractor and the Fleet Readiness Coordinator for all technical activities related to the contract. Coordinate and facilitate technical discussions, meetings, and reporting to ensure project objectives are met. Provide day-to-day guidance, mentorship, and supervision to the technical workforce, ensuring adherence to project standards and schedules. Assist in troubleshooting, analyzing, and resolving technical issues related to the contract scope. Support the development, review, and implementation of technical documentation, procedures, and reports. Monitor project progress, identify potential risks, and recommend corrective actions to maintain project timelines. Collaborate with cross-functional teams to ensure technical compliance and quality standards are maintained. TRISTAR values innovation, teamwork, and professional growth. We offer a collaborative work environment with opportunities for career advancement, competitive benefits, and the chance to contribute to impactful government projects. If you are a dedicated technical professional looking to make a difference, we encourage you to apply. Requirements: Conceptual knowledge of U.S. Navy Combat Systems, Electromagnetic Warfare (EW) systems, and MEWSD-supported systems preferred Two (2) years of demonstrated experience with the AN/SLQ-32 V6 System For Legacy Technicians: 10 years of demonstrated experience with the AN/SLQ-32 V1-V5 System Knowledge of the AN/SLQ-32 V7 System and/or Q-70, SEI and SLA-10B Subsystems Experience working Casualty Reports (CASREPs) Experience with reporting (examples Daily Activity Report Tracker (DART) and System Progression Activity (SPAT)) Experience with Distance Support in accordance with the Joint Fleet Forces Maintenance Manual (JFFMM) Experience with performing On Board Tech Assist (OBTA) in accordance with the JFFMM Experience with performing SOVT, PICO, CSATs, CSSQTs MUST be a US Citizen Have an active secret clearance or the ability to obtain one Education: Fiber Optic Training OSHA 10-Hour Maritime #7615 Shipyard Training ESD About TRISTAR TRISTAR is an SBA certified Service-Disabled Veteran-Owned professional services company supporting the U.S. Department of Defense programs. Our core competencies include Electronic Warfare, Enterprise Management, Full Spectrum Cybersecurity, Information Technology, Digital Transformation, Software Engineering and Development, Maritime Modernization and Engineering, and Technical Solutions. TRISTAR was founded in March 1995 and has built an employee-focused collaborative environment which enables our team of professionals to create and deliver customized solutions to meet our customers' mission critical challenges. TRISTAR's core capabilities support customers with end-to-end solutions. For over 30 years, TRISTAR has demonstrated and perfected our ability to successfully manage any task, small or large no matter how difficult or complex. TRISTAR is proud to serve the Department of Defense and other Federal Agencies. TRISTAR provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description THOR Solutions is actively seeking a Mechanical Engineering Technician with expertise in Navy shipboard diesel engines to support the Naval Special Warfare Center Philadelphia Division (NSWC-PD) in Norfolk, VA. The Technician will provide full-time onsite contracted support to NSWCPD. This position is associated with an upcoming contract that THOR is pursuing, with an expected start in early January 2026. We are conducting preliminary, “contingent” hiring for roles associated with this contract. The work start is dependent upon THOR being awarded this contract. Typical Responsibilities: May include (but are not limited to) the following actions: Provide DRS support in the development and updating of Propulsion, Power and Diesel Engines Systems technical and ILS documentation. Technical and logistics documentation to be updated includes but is not limited to: Technical Manuals Personnel Qualification Standards (PQS) Depot Level Maintenance Standards (MS) Technical Repair Standards (TRS) Process Control Procedures Class Standard Work Templates PMS (MIPs & MRCs) EOSS APLs. Provide the technical support necessary to incorporate changes to this documentation resulting from feedbacks, advisories, technical bulletins, Technical Warrant Holder (TWH) guidance, hardware configuration changes resulting from alteration installations, and other situations that arise which require the updating of technical and logistics support documentation. Provide assistance with the development and tracking of DRS Plan of Action and Milestones (POAMs) for related Propulsion, Power and Diesel Engines Systems programs and projects Location: Primarily onsite at THOR local office in Norfolk, VA. Travel: Up to 25% travel anticipated, for 1-2 week durations, to CONUS and OCONUS locations including: Philadelphia, PA, Beloit, WI, Detroit, MI, Peoria, IL, Washington DC, Norfolk, VA, Mayport, FL, San Diego, CA, Everett, WA, Pearl Harbor, HI, Bahrain, Sasebo, Japan, Yokosuka, Japan, Singapore, and various Naval facilities and ship new construction yard facilities. Typical Physical Activity: Primarily desk/computer work in an office environment. May involve: repetitive motion. Periodic visits to waterfront/shipboard environments. May involve: traversing shipboard environments (e.g., confined spaces, ladders, hatches) or vision. Eligibility for a SECRET Security Clearance is Required: This position requires eligibility for a Secret security clearance, to be obtained after hire. Only U.S. citizens are eligible for a security clearance; therefore, only current U.S. citizens will be considered for this position. Required Knowledge, Skills, and Abilities: High School diploma, GED, or equivalent. At least ten (10) years of recent, relevant hands-on experience in the area of diesel propulsion and power generating systems. Four (4) years of experience with US Navy diesel engine applications, specifically FM-Pielstick, FMOP, Caterpillar, MTU and/or Isotta Fraschini. Three (3) years of experience supporting the US Navy DRS Program. To include experience with the following: Shipboard Automated Maintenance Manager (SAMM) Conducting DOCTOR diesel engine performance analyses (DEPA) Reviewing DOCTOR combustion analysis data and providing technical recommendations to correct out-of-parameter conditions. Ability to communicate effectively. Benefit Offerings: Along with competitive pay, THOR offers a comprehensive benefits package including: Paid Time Off (accrued) Paid Holidays 401(k) with employer match and traditional/Roth options Medical Insurance (3 plan options) + TRICARE Supplemental Coverage Dental Insurance (2 plan options) Vision Insurance Plan Healthcare and Dependent Care Flexible Spending Accounts Commuter/Transit Benefits Basic Life/AD&D, Short-Term and Long-Term Disability Insurance Supplemental Life Insurance Pet Benefits Legal Resources ID Theft Benefits Employee Assistant Plan and Work-Life Program Voluntary Leave Transfer Program Tuition Reimbursement Program Employee Referral Program Please be aware that many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. Founded in 2009, THOR Solutions, LLC (THOR) is a rapidly growing Center for Veteran's Excellence (CVE) verified Service-Disabled Veteran-Owned Small Business (SDVOSB) providing mission critical support across the Department of Defense, Department of Homeland Security, federal civilian agencies and commercial maritime industry, worldwide. THOR provides innovative and tailored expertise in multidisciplinary engineering, project and program management, business and financial management, technical support, integrated logistics support, training support, fleet support, corporate operations support, assessments and studies. THOR is privileged to deliver service solutions to the nation's most complex military, public sector and industry challenges. THOR is proud to be an Equal Opportunity Employer, including veterans and individuals with disabilities. THOR considers all qualified applicants for employment without regard to legally protected characteristics. This policy applies to all terms and conditions of employment. If you are an individual with a disability and would like to request a reasonable accommodation as part the employment selection process, please contact us at *************************** or **************. Powered by JazzHR VBFzUX8hYL

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The role of the Engineering Technician II (Shipboard) is to provide day-to-day Shipboard installation support for a variety of RF, audio, video, navigation, and communication system installations. This position reports to the Installation Supervisor. Responsibilities Essential Duties & Job Functions: * Working with SPAWAR ISEAs and other technical codes, program/project managers, and SMEs, the Engineering Technician II (Shipboard) will assist with the Shipboard installation of complex audio-visual displays, various communication and electronic warfare systems, related ancillary and computer-based systems onboard naval ships and command centers worldwide. Job Requirements Mandatory: * Must be a U.S. citizen. * Must have or be able to obtain a minimum security clearance of secret. * Must have a minimum of 6 years shipboard installation/integration experience. * Must have High School diploma. * Must be willing to travel up to 75% CONUS/OCONUS. * Must be willing to work extended hours including weekends and holidays. * Must have a valid driver's license and reliable transportation. Reasonable Accommodation: It is CGS, LLC business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

Engineering Technician Government Spaces: JEB Little Creek, FT. Story, VA Clearance Level: Secret Responsibilities (including, but not limited): Provide onsite hands-on maintenance, troubleshooting and technical expertise to ensure all work meets required specifications. Install and test advanced submarine technology. Evaluate specific deficiencies and sustainability of submarine and submersible systems and components. Provide necessary mechanical support while working alongside other Government agencies on common project deliverables. Qualifications HS Diploma or GED plus four (4) years related experience or BA/BS and one (1) year related experience. Minimum four (4) years of technical experience, supply chain administration, and use of MS Office suite. Prior Military submersible technical and/or electrical experience preferred.

Engineering Technician I (Job ID: 3285) Location: Norfolk, VA Remote Status: On-Site Job Id: 3285 # of Openings: 30 Engineering Technician I Purpose: * Valkyrie Enterprises has an immediate need for an Engineering Technician I who will be a key support to space modifications, installation, and sustainment of infrastructures. * This position is located in Norfolk, VA and surrounding shipyards. Job Description: * Facilitates Removal, disposal and replacement of metallic sunshields, scuppers and troughs with composite variants IAW NAVSEA Technical Publication S9078-AC-GYD-010 and "ILS Summary of Composite Components * Responsible for the Lifecycle of the shore-site training systems. * Perform modifications as required including, but not limited to; space modifications, the installation and sustainment of infrastructures such as hardware, foundations, cabling (copper and fiber optic), connector installation, false decking and overhead, deck covering, IT Systems, electrical, heating, ventilation, air conditioning, and electronic cooling water piping. * Responsible for shipboard training systems to perform modifications as required including but not limited to system grooms and overhauls, support with equipment maintenance and training, troubleshooting, and equipment repair including hardware, software and cabling, and logistic support. * Generate and execute procedures in support of shore-site facility activations, upgrades, and repairs. * Read and follow schematics and maintaining assembly instructions associated with Government-built prototype equipment and development of schematics, drawings, and TDPs. * Perform the installation and initial verification of equipment and cables installed in the facility. * Maintain records (engineering or administrative) data such as tests, drawings, computer usage, Quality Assurance etc.; performs computations by substituting numbers in specified formulas; plot data and draw simple curves and graphs. * Follow established policies and procedures to ensure proper working order. * Assist in field or production activities such as data collection, equipment or machine design, testing, quality control and efficiency studies. Qualifications: * Must have a High School or equivalent and appropriate Trade School or related Armed Forces School and at least 3 years of related experience. * Must have experience in engineering studies and analysis of actual and/or proposed shore-site installations. * Must be able to perform facility visits to verify dimensions, interfaces, power availability, tolerances, and other installation factors. Desired Qualifications: * Current or recent experience supporting U.S. Naval aircraft carriers or other U.S. Naval vessels embedded Training Systems Security Requirements: * Must be eligible to obtain and maintain a DoD Secret Security Clearance to access public and private shipyards and Naval installations. * Must meet REAL ID requirements for base and travel access. Travel Requirements: * Occasional travel- 10% * If position requires travel by domestic flight or access to secure federal facilities/military bases, candidate must be able to obtain (by start of position) and maintain appropriate identification credentials, such as REAL ID. (More information regarding REAL ID can be found: *************************** ) Physical Requirements: * Remaining in a stationary position, often standing, or sitting for prolonged periods. * Moving about to accomplish tasks or moving from one worksite to another. * Communicating with others to exchange information and repeating motions that may include the wrists, hands and/or fingers. * May require climbing up/down ship ladders and enclosed spaces. * Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal. Valkyrie Enterprises, LLC. is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Please note: The annualized pay range referenced is a general guideline. Valkyrie Enterprises considers factors such as (but not limited to) the following when determining base pay: scope and responsibilities of the position, candidate's related work experience, education/training/certifications, key skills, internal peer equity/external market competitiveness, as well as other business considerations. Additionally, Valkyrie Enterprises provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid life and disability insurances, 401k with match, education reimbursement, as well as company paid holidays and paid time off (PTO). Pay Range: $20 - $25 per hour

**Amentum** is seeking a **Building Automation Controls Technician** located in the Williamsburg area of Virginia. The Technician is responsible for installing, programming, testing, calibrating, operating, and repair of control systems along with their related software, hardware, and equipment. These systems include energy management systems, environmental control systems, boiler control systems, chiller control systems, domestic water systems, sanitary and storm sewer systems, and plant monitoring instruments. **Job Requirements:** + Receives supervision in the form of daily assignments/work orders, projects and tasks to be completed. + Performs the duties of the job within specific guidelines and using departmental procedures. + Requires knowledge gained through prior experience with control systems. + Skills in analyzing system malfunctions and determining appropriate repairs. + Specific knowledge of the related software and computer systems. + Incumbents may be generalists who work on multiple systems, or specialists who serve as an expert technician on a single type of system. + Requires basic customer service skills. + Physical abilities such as trunk strength, manual dexterity, and wrist-finger movement in order to perform the essential functions of the position. + Requires general knowledge of digital control concepts such as analog and digital inputs and outputs, sequences of operations, point addressable devices, closed loop and supervisory feedback systems, device programming, serial communications, and computer networking. + Requires general skill in analyzing control system malfunctions and determining appropriate repairs. + Troubleshooting system controller boards, field devices, sensor wiring, control wiring, general input and output wiring, and network/communications wiring. + Requires skill in the use of technicians' tools such as electric meters, oscilloscopes, calibration devices, electronic testers, etc. + Requires knowledge of general methods of electrical equipment installation. + Requires advanced abilities in use of a PC and application software. + Diagnose and resolve technical problems related to control and monitoring systems and perform needed repairs. + Tests and calibrates system devices to ensure functional reliability of operating/monitoring system. + Inspects, trouble shoots, performs corrective and preventative maintenance on HVAC equipment such as air handlers, compressors, vacuum pumps, and exhaust fans by changing belts, lubricating parts, & replacing motors, valves, sheaves, motor bearings, etc. + Install, modify, and maintain system hardware such as electrical conduit, sensor wiring, communications wiring, antenna wiring, radio equipment, power supplies, control system enclosures, etc. + Install and maintain motor control systems for fans, pumps, compressors, etc. + Check, monitor, maintain, and install building automation system for HVAC, fume hoods, exhaust fans, and related systems. + Program control systems using appropriate system program language for proper sequences of operations and operating schedules. + Read and modify where necessary appropriate system blueprints and schematics. + Create hardware schedules for controls projects, renovations, and new construction projects. + Maintains appropriate logs and records of systems operations. + Performs other miscellaneous duties as needed. **Minimum Qualification Requirements** + High school diploma or GED + Valid drivers license + Two years of experience installing and maintaining building/plant control systems and their related equipment. + Experience with energy management systems, environmental control systems, boiler control systems, chiller control systems, sanitary/storm sewer systems, plant instrumentation systems. + Appropriate vocational/technical training may substitute at an equivalent rate for the required experience. + Ability to obtain and/or maintain a government issued clearance at time of application Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations.Responsibilities Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness Provide technical support and training to field technicians and end-users as needed Qualifications Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems Familiarity with autonomous systems, marine navigation, and control systems is preferred Strong analytical and problem-solving skills with attention to detail Experience working with the DoD or government contracts is a plus Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands Ability to perform physically demanding work for extended periods of time, up to 12 hours/day Frequently and repetitively, lift, push and carry up to 20 lbs. The ability to carry 20 lbs. up and down stairs Ability to work outside for an extended period of time Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day Climb and maintain balance on ladders, platforms, or other high structures Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time Exposures to hazardous materials and ability to follow waste handling/disposal procedures Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3) . Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

THOR Solutions is actively seeking a Mechanical Engineering Technician with expertise in Navy shipboard diesel engines to support the Naval Special Warfare Center Philadelphia Division (NSWC-PD) in Norfolk, VA. The Technician will provide full-time onsite contracted support to NSWCPD. This position is associated with an upcoming contract that THOR is pursuing, with an expected start in early January 2026. We are conducting preliminary, “contingent” hiring for roles associated with this contract. The work start is dependent upon THOR being awarded this contract. Typical Responsibilities: May include (but are not limited to) the following actions: Provide DRS support in the development and updating of Propulsion, Power and Diesel Engines Systems technical and ILS documentation. Technical and logistics documentation to be updated includes but is not limited to: Technical Manuals Personnel Qualification Standards (PQS) Depot Level Maintenance Standards (MS) Technical Repair Standards (TRS) Process Control Procedures Class Standard Work Templates PMS (MIPs & MRCs) EOSS APLs. Provide the technical support necessary to incorporate changes to this documentation resulting from feedbacks, advisories, technical bulletins, Technical Warrant Holder (TWH) guidance, hardware configuration changes resulting from alteration installations, and other situations that arise which require the updating of technical and logistics support documentation. Provide assistance with the development and tracking of DRS Plan of Action and Milestones (POAMs) for related Propulsion, Power and Diesel Engines Systems programs and projects Location: Primarily onsite at THOR local office in Norfolk, VA. Travel: Up to 25% travel anticipated, for 1-2 week durations, to CONUS and OCONUS locations including: Philadelphia, PA, Beloit, WI, Detroit, MI, Peoria, IL, Washington DC, Norfolk, VA, Mayport, FL, San Diego, CA, Everett, WA, Pearl Harbor, HI, Bahrain, Sasebo, Japan, Yokosuka, Japan, Singapore, and various Naval facilities and ship new construction yard facilities. Typical Physical Activity: Primarily desk/computer work in an office environment. May involve: repetitive motion. Periodic visits to waterfront/shipboard environments. May involve: traversing shipboard environments (e.g., confined spaces, ladders, hatches) or vision. Eligibility for a SECRET Security Clearance is Required: This position requires eligibility for a Secret security clearance, to be obtained after hire. Only U.S. citizens are eligible for a security clearance; therefore, only current U.S. citizens will be considered for this position. Required Knowledge, Skills, and Abilities: High School diploma, GED, or equivalent. At least ten (10) years of recent, relevant hands-on experience in the area of diesel propulsion and power generating systems. Four (4) years of experience with US Navy diesel engine applications, specifically FM-Pielstick, FMOP, Caterpillar, MTU and/or Isotta Fraschini. Three (3) years of experience supporting the US Navy DRS Program. To include experience with the following: Shipboard Automated Maintenance Manager (SAMM) Conducting DOCTOR diesel engine performance analyses (DEPA) Reviewing DOCTOR combustion analysis data and providing technical recommendations to correct out-of-parameter conditions. Ability to communicate effectively. Benefit Offerings: Along with competitive pay, THOR offers a comprehensive benefits package including: Paid Time Off (accrued) Paid Holidays 401(k) with employer match and traditional/Roth options Medical Insurance (3 plan options) + TRICARE Supplemental Coverage Dental Insurance (2 plan options) Vision Insurance Plan Healthcare and Dependent Care Flexible Spending Accounts Commuter/Transit Benefits Basic Life/AD&D, Short-Term and Long-Term Disability Insurance Supplemental Life Insurance Pet Benefits Legal Resources ID Theft Benefits Employee Assistant Plan and Work-Life Program Voluntary Leave Transfer Program Tuition Reimbursement Program Employee Referral Program Please be aware that many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. Founded in 2009, THOR Solutions, LLC (THOR) is a rapidly growing Center for Veteran's Excellence (CVE) verified Service-Disabled Veteran-Owned Small Business (SDVOSB) providing mission critical support across the Department of Defense, Department of Homeland Security, federal civilian agencies and commercial maritime industry, worldwide. THOR provides innovative and tailored expertise in multidisciplinary engineering, project and program management, business and financial management, technical support, integrated logistics support, training support, fleet support, corporate operations support, assessments and studies. THOR is privileged to deliver service solutions to the nation's most complex military, public sector and industry challenges. THOR is proud to be an Equal Opportunity Employer, including veterans and individuals with disabilities. THOR considers all qualified applicants for employment without regard to legally protected characteristics. This policy applies to all terms and conditions of employment. If you are an individual with a disability and would like to request a reasonable accommodation as part the employment selection process, please contact us at *************************** or **************.

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The role of the Engineering Technician I (Shipboard) is to provide day-to-day Shipboard installation support for a variety of RF, audio, video, navigation, and communication system installations. This position reports to the Installation Supervisor. Work Model: Onsite Responsibilities Essential Duties & Job Functions: * Working with SPAWAR ISEAs and other technical codes, program/project managers, and SMEs, the Engineering Technician I (Shipboard) will assist with the Shipboard installation and integration of complex audio/visual displays, various communication and electronic warfare systems, related ancillary and computer-based systems onboard naval ships and command centers worldwide. Accountable For: * We expect this employee to have experience in and be familiar with work being performed in or around industrial environments such as shipyards and Naval/Coast Guard bases and piers. As well as various and subcontractor Government sites. Job Requirements Mandatory: * Must be a U.S. citizen. * Must have or be able to obtain a minimum Secret security clearance. * Must have a minimum of 3 years of Shipboard installation/integration experience. * Must have a High School diploma. * Must be willing to travel up to 75% CONUS/OCONUS. * Must be willing to work extended hours, including weekends and holidays. * Must have a valid driver's license with an acceptable driving record upon request. * Must be able to successfully pass a pre-employment background check and pre-hire drug test. Working Conditions: * This is a full-time position in support of the Chugach integration and installation tasking team lead. The work may be performed at (Location TBD), industrial areas to include; shipyard, Navy/Coast Guard bases, shipboard and shore site locations. * Work is performed inside industrial environments and is subject to working around exposures to hazards that may cause bodily harm, cuts, bruises, burns, etc. * Work may also be performed outside, even during inclement weather. * Work may be performed at heights (aloft) where fall protection is required. * Work may be performed, including welding and cutting of metal. * Work may be performed off a ladder. Physical Requirements: * Ability to lift 45 lbs., climb vertical ladders, operate, and work around heavy machinery. * Work at heights (aloft). * Operate power tools safely. * Carry equipment and machinery around ships. * Ability to stand and walk most of the shift. * Kneel and crawl at the work site. * Crouch through void openings. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email ******************. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

Combatant Craft Mechanic CCM Clearance Level: Secret Responsibilities (including, but not limited): Provide diagnostics support, troubleshooting support, and repair to the following equipment: Diesel engines (Motoren-und Turbinen-Union (MTU) Preferred), reduction gears, auxiliaries, propulsion systems, including their sub[1]assemblies such as engine electronic/electrical systems, fuel systems, lubrication systems, starting systems, steering systems, electrical distribution system, bilge dewatering systems, cooling systems, fire suppression, and hydraulic systems for the CCM, prime mover, trailer and associated equipment. Assist and provide technical recommendations to the Government regarding CCM maintenance and repair. Focus shall be on providing technical assessments and recommendations to the Preventative Maintenance System of the craft. Maintain and repair tires, batteries, brakes and valves, conduct shop management functions such as maintenance scheduling and spare parts inventory control and estimate labor, material and equipment needs. Page 2 of 8 Diagnose and troubleshoot equipment failures, repair and maintain diesel and gasoline engines, adjust and repair ignition, fuel, electrical, hydraulic and steering systems. Maintain chassis, frames, and bodies as well as work with hoisting and jacking equipment, power tools, measuring instruments, gauges, meters, and lubricating equipment. Be capable of performing repairs in both a shipyard and workshop environment as required. Be familiar with and possess ability to utilize specialty tools, such as torque wrenches, timing and fuel rack adjustment tools, feeler gauges, depth gauges, snap gauges, and other specific tools as part of the routine maintenance, diagnosis, and repair activities. Assist Government personnel in preparations and transport of CCM.. Tasking shall include movement of all supporting equipment in order to provide contingency response and logistical support to detachments at various locations both CONUS and OCONUS. Meet requirements in order to deploy and travel with a CCM Detachment CONUS and OCONUS and must maintain a valid passport to support overseas travel requirements and possess and maintain SECRET security clearance. Possess a class “A” license to operate the CCM prime mover with trailer and craft attached. Qualify to operate various types of government owned vehicles and equipment to include possessing the following: a) Class A Tractor Trailer license with HAZMAT Endorsement b) Forklift Operator License up to 20,000 pounds c) History of Power Plant Operation and setup (30K/60K Generator) Coordinate with Troop or Maintenance Department Chain of Command (COC) on all matters concerning CCM safe engineering and operating procedures. Qualifications Support Mechanics shall be familiar with welding operations and possess supporting qualifications in order to conduct or assist in repairs of CCM and associated equipment. Specific skill shall include: Blueprint and schematics reading. Basic understanding of Sheet Metal Arc Welding (SMAW), Gas Tungsten Arc Welding (GTAW), and Gas Metal Arc Welding (GMAW) processes. Basic knowledge of sheet metal fabrication. Basic understanding of fiber glass and hull repair. Shall have a working knowledge of military publications, technical instructions, and engineering/ electrical illustrations relating to repair procedures and operations. Previous military experience and or understanding of the US Navy rates, ranks, COC and protocols is preferred but not required. Must have experience working with military combined with experience maintaining and repairing diesel engines, gasoline engines, chassis, lubricating systems.