Controls technician jobs in Providence, RI - 373 jobs

Engineering Technician - Medical Device R&D temp to perm Marlboro, MA Support engineers in the development and testing of single-use medical devices. This hands-on role involves working with Engineers testing prototypes, performing validation and system testing, and accurately documenting results in a regulated environment. Responsibilities Perform validation, strength, and system testing on medical devices Work with tubing and small mechanical components Set up and maintain test equipment; perform basic troubleshooting Document test results and communicate findings to engineers Support calibration and quality documentation requirements Qualifications Associate degree or equivalent hands-on experience 1+ year experience in technical, lab, R&D, or manufacturing role Strong mechanical aptitude and troubleshooting skills Ability to follow procedures and document work accurately Medical device or regulated environment experience preferred.

A leading investment firm in Boston is looking for a Principal Front-Office Engineer to drive the design and implementation of applications for market analysis. You will work closely with portfolio analysts and traders, focusing on building robust systems that enhance investment decisions. The ideal candidate has over 5 years of experience in Python development and strong skills in financial data manipulation. This position offers a hybrid work arrangement, with 2 days in the office per week. #J-18808-Ljbffr

Job Description Lead Boiler Controls Technician Employment Type: Full-Time A fast-growing climate technology company is seeking a Lead Boiler Controls Technician to install, configure, and service advanced control and sensor networks in residential and commercial buildings throughout the Boston metro area. This role is ideal for a technician with an electrical or HVAC background who enjoys hands-on work, technology, and problem-solving. You'll play a key role in modernizing building energy systems, improving efficiency, and reducing environmental impact - while building a long-term career with strong growth potential. Key Responsibilities Install control systems and configure internet connectivity in residential and commercial buildings Install and commission wired and wireless sensor networks throughout buildings Test, troubleshoot, and verify proper operation of control and network systems Navigate boiler rooms and identify components in steam and hydronic systems Coordinate installation schedules with internal dispatch and operations teams Maintain accurate installation and service records across internal tracking systems Manage and maintain parts inventory within assigned service vehicle Respond to service calls as needed to support installed systems Required Experience & Qualifications Background in HVAC, electrical, or related technical field Working knowledge of computers, circuits, and basic networking concepts Willingness to learn boiler systems, controls, and energy technologies (training provided) Valid driver's license with a clean driving record Must be located in or able to commute throughout the Boston metro area Preferred Qualifications Strong multitasking and time management skills Natural problem-solving ability and initiative High attention to detail and strong sense of ownership Positive, team-oriented attitude Computer proficiency with Microsoft Office and Google Docs/Sheets Conversational Spanish is a plus Compensation & Benefits Competitive hourly pay: $35-$50/hour, based on experience Medical, dental, and vision insurance HSA and FSA options Paid parental leave Access to mental health and advocacy support resources Flexible PTO 401(k) plan Company-paid life insurance and optional supplemental coverage Summer Fridays Employee Resource Groups Why This Opportunity This is an excellent opportunity to join a rapidly expanding climate-tech organization and build a career beyond a traditional technician role. You'll work alongside talented professionals in technology, real estate, and managed services while making a measurable impact on energy efficiency and carbon reduction nationwide.

Controls Technician - Boston, MA - $38.00/hr to $48.00/hr - Full-Service Mechanical Contractor About the Opportunity A long-established and award-winning mechanical and building services contractor is seeking an experienced Controls Technician to support projects throughout the Boston, MA region. This firm delivers high-performance building and energy solutions, specializing in the installation, startup, commissioning, and service of Building Automation Systems (BAS) for healthcare, higher education, pharmaceutical, and commercial facilities. This role offers overtime availability, a company vehicle, and strong benefits while working with a team recognized for technical expertise, reliability, and long-term employee development. Position Details Title: Controls Technician Location: Boston, MA (Greater Boston Area) Compensation: $38.00/hr - $48.00/hr + Overtime Bonus: Year-End Performance & Profitability Bonus Employment Type: Full-Time Key Responsibilities Install, commission, and troubleshoot Building Automation Systems (BAS) across diverse facility types Coordinate BAS installations according to engineered drawings, specifications, and project standards Mount and wire controllers, sensors, and control panels; test and validate control sequences Program and integrate BAS software databases, including custom logic, sequence modifications, and system tuning Perform point-to-point verification and full-system commissioning to ensure system integrity and performance Diagnose issues with inputs, outputs, network communication, and field devices Work with BAS communication protocols including BACnet, Modbus, and LON Collaborate with building owners, GCs, engineers, and end users to support successful project turnover Ideal Candidate Previous experience as a Controls Technician or similar BAS controls role Strong proficiency in controls integration, programming, and commissioning practices Solid understanding of electrical fundamentals and HVAC equipment operation Excellent troubleshooting, diagnostic capabilities, and problem-solving skills Detail-oriented communicator who can work independently and as part of a team What's Offered $38.00/hr - $48.00/hr (based on experience) Overtime Opportunities Annual Year-End Bonus (Performance & Company Profitability) Company Vehicle with Fuel & Maintenance Included Comprehensive Medical, Dental, and Vision Coverage Life Insurance, Short-Term & Long-Term Disability 401(k) Program with 3% Company Match - Fully Vested Day One Generous PTO, Holidays, Sick Leave, and a Paid Birthday Off About the Company This company is a highly respected mechanical and building services provider serving the Northeast. With a workforce of more than 750 professionals, the organization specializes in HVAC, energy services, controls, and full-service MEP solutions supporting healthcare, higher education, life sciences, industrial, and commercial clients.

Are you looking to make a meaningful impact on public health and the environment? Join the MWRA team! We deliver some of the nation's highest-quality drinking water to 3 million residents, restored Boston Harbor, and continue to invest in protecting vital public resources. Be part of a mission-driven organization where your work truly makes a difference in a safe, inclusive, and supportive environment. Summary: Participates in the development, installation and maintenance of the Authority's Supervisory Control and Data Acquisition (SCADA) system. Required to be on-call for emergencies 24 hours per day, 7 days a week. Posting Period: 1/9/2026 to 1/23/2026 Location: Clinton, MA Salary: $103,840.83 Annually $1,996.94 Weekly Full salary range: $72,259.25 - $103,840.83 Annually $1,389.60 - $1,996.94 Weekly Work Schedule: Monday - Friday 7:00am - 3:30pm Key Responsibilities * Assists with the development, installation, enhancement and maintenance of the control and monitoring system. * Installs, repairs and services direct to line, time division multiplex digital channel banks, CSU/DSU high-speed data modems and other data communications equipment. * Works with the phone company and other vendors to achieve data line installations and repairs. * Performs precision calibration and maintenance on primary instrumentation devices utilized for the control and operation of SCADA controlled and monitored water and wastewater facilities. * Installs, repairs and services UHF, point to multipoint multiple addresses, and spread spectrum data radios along with analog/digital microwave systems in the 2, 6, 10, 11 and 23 Ghz bands as directed. * Installs, repairs and services microwave towers, antennas, transmission lines and dehydrator units as directed. * Works with Human Machine Interface screens, SCADA PCs, network equipment, programmable logic controllers and remote terminal units as directed. * Performs preliminary path studies of proposed microwave links as well as frequency interference and intermodulation studies at microwave/radio sites. * Performs related duties as required. Required Qualifications * An Associate's Degree in Electronic Engineering, an electronics technician certification (community college or trade school), or an ISA Control Systems Technician Certification; and * At least one (1) year experience maintaining and servicing computer controlled programmable logic controllers (PLCs) and/or other types of automated process control; and * Experience in the calibration, repair and maintenance of instrumentation and data communication equipment required; or * Any equivalent combination of education or experience. * Valid Class D motor vehicle license. * FCC General Radiotelephone Operator License (or ability to obtain license within six months.) * Pass Confined Space Entry Training within six months. * This position has been designated as essential in instances where the MWRA Executive Director requires essential personnel to report to work such as inclement weather or other emergencies. * THIS POSITION QUALIFIES FOR A SIGN ON BONUS. FOR INFORMATION ON THE BONUS AND OTHER BENEFITS PLEASE CLICK ON THE LINK! - https://www.mwra.com/about-mwra/careers Knowledge and Abilities * Ability to troubleshoot to the board level utilizing a variety of electronic test equipment as well as computer driven diagnostics is required. * Ability to install, align and service microwave towers, dish, yagi and Omni directional antennas in excess of 100 feet above ground level required. * Familiarity with windows-based HMI application software is desired. * Familiarity with Auto-CAD, or other equivalent CAD design program is desired. * Familiarity with computer aided microwave terrain analysis engineering program. * Working knowledge of Windows Operating Systems. * Strong initiative/work ethic and excellent interpersonal, oral and written communication skills required. Tools and Equipment Used Electronic test equipment, PLC's climbing and fall retrieval equipment, personal computer including word processing and other software, hand tools, mobile radios and copy and fax machines. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel or operate objects, tools or controls and reach with hands and arms. The employee is regularly required to walk, sit, climb or balance, stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee occasionally works in outside weather conditions. The employee frequently works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions and vibration. The employee occasionally works in high, precarious places and is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals and risk of electrical shock. The noise level in the work environment is usually loud in field settings and moderately quiet in office settings. Supervision Received and Exercised Works under the general supervision of the Senior SCADA Technician or Unit Supervisor. Exercises close supervision of technicians and support staff. Other Position Information PCR#: 5841005 Division: Operations Department: Scada Maint - Water/Wastewater Union/Grade: AFSCME (Unit 2)/Grade 18 Massachusetts Water Resources Authority (MWRA) is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, national or ethnic origin, age, religion, disability, sex or gender, sexual orientation, gender identity or expression, or veteran status.

Job DescriptionLead Boiler Controls Technician Employment Type: Full-Time A fast-growing climate technology company is seeking a Lead Boiler Controls Technician to install, configure, and service advanced control and sensor networks in residential and commercial buildings throughout the Boston metro area. This role is ideal for a technician with an electrical or HVAC background who enjoys hands-on work, technology, and problem-solving. You'll play a key role in modernizing building energy systems, improving efficiency, and reducing environmental impact - while building a long-term career with strong growth potential. Key Responsibilities Install control systems and configure internet connectivity in residential and commercial buildings Install and commission wired and wireless sensor networks throughout buildings Test, troubleshoot, and verify proper operation of control and network systems Navigate boiler rooms and identify components in steam and hydronic systems Coordinate installation schedules with internal dispatch and operations teams Maintain accurate installation and service records across internal tracking systems Manage and maintain parts inventory within assigned service vehicle Respond to service calls as needed to support installed systems Required Experience & Qualifications Background in HVAC, electrical, or related technical field Working knowledge of computers, circuits, and basic networking concepts Willingness to learn boiler systems, controls, and energy technologies (training provided) Valid driver's license with a clean driving record Must be located in or able to commute throughout the Boston metro area Preferred Qualifications Strong multitasking and time management skills Natural problem-solving ability and initiative High attention to detail and strong sense of ownership Positive, team-oriented attitude Computer proficiency with

Instrumentation, Controls and Electrical Technician FLSA Status: Non-Exempt Come Join Our Growing Team! We are looking for an Instrumentation, Controls & Electrical Technician to join our dynamic and growing team in Coventry, RI! This position is responsible for performing instrumentation calibrations, maintaining the process controls systems and function as the plant electrician. What The Job Entails PM execution in a highly proceduralized, compliance driven, regulated (cGMP) environment. Demonstrated experience performing Calibrations of process instruments. A working knowledge of an automated calibration system (including database and calibrators) such as Beamex, is strongly desired. Experienced with a good working knowledge of PLCs, DCS and building automation systems (BMS) and process control systems such as DeltaV and Allen-Bradley. Demonstrated experience as an industrial electrician with a working knowledge of electrical systems and equipment such as switchgear, VFDs, UPS systems, emergency generators and fire alarm systems. Experienced with a computerized maintenance management system (CMMS) such as SAP to document PM activities and review equipment history is highly desirable. Rotate with other ICE technicians as the on-call ICE technician for call-ins for one week duration. Respond to the plant to troubleshoot and correct problems with process, utilities, or building systems. Manage workload to perform calibrations and assigned tasks on time. Our ideal candidate High school diploma or GED required, with advanced technical training desired in field of expertise, i.e. electrical, instrumentation and/or controls. RI State Journeyman's electrician license is required. 10 years prior industrial experience is desired, but some experience may substituted by successful completion of a trade apprentice program or technical degree. Ability to read and understand P&IDs and loop diagrams. Ability to read, understand and test PLC code. Proficiency with Microsoft office including outlook, MS-word, excel, etc. Ability to read, understand and execute various facilities and manufacturing department Standard Operating Procedures in a highly regulated environment. Possess an understanding of the change control process and the requirements for it. Familiarity and experience documenting working in a computerized maintenance management system, such as Oracle, Maximo or SAP is desired. Benefits: As part of our commitment to your well-being, we offer a comprehensive benefits package: Insurance including Medical, Dental & Vision with significant employer contributions Employer-funded Health Reimbursement Account Healthcare & Dependent Care Flexible Spending Accounts 100% Employer-paid Employee Life and AD&D Insurance, Short and Long Term Disability Insurance 401k plan with generous employer match Access to an Employee Assistance Program About Pharmaron - Who Are We? Pharmaron is a premier R&D service provider for the life sciences industry. Founded in 2004, Pharmaron has invested in its people and facilities, and established a broad spectrum of research, development and manufacturing service capabilities throughout the entire drug discovery, preclinical and clinical development process across multiple therapeutic modalities, including small molecules, biologics and CGT products. With over 21,000 employees, and operations in China, the U.S., and the U.K., Pharmaron has an excellent track record in the delivery of R&D solutions to its partners in North America, Europe, Japan and China. #LI-SE1

Be part of the future! Let's Build a better Tomorrow Together! We are one team, dedicated to working together to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people - you bring your talent, and we'll give you the space and opportunities to grow and succeed. We are passionate about making a difference! What we offer Competitive salary Paid vacation/holidays/sick time Comprehensive benefits package including 401K, medical, dental, and vision care Extensive product and on the job/cross training opportunities with outstanding resources Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Company vehicle, Tools and Equipment to complete all jobs Providing Scheduling and management support What you will do Perform HVAC Control systems programming, troubleshooting, installation, commissioning and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment Provide front line technical and repair support through effective communications with Johnson Controls customers Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers Be part of an expanding team of the best technicians in the industry while you build career with a first-class global organization How you will do it Loading Johnson Controls field and network level controller software Performing commissioning and system diagnostics for all levels of system controllers as well as end devices (i.e., Sensors, actuators, etc.) and complete all required commissioning documentation Keeps management and JCI contractor or customer informed of job progress and issues Calibrates systems requiring basic electronic test equipment Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation Documents changes and provides information for as-built documentation Execute company sponsored as well as personally initiated training to ensure the highest level of knowledge and capability are maintained Engage with customers to fully understand their systems and needs Communicates with the JCI contractor or customer upon arrival and before leaving the work site Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety What we look for Required Strong understanding of HVAC systems, sequence and applications Demonstrated technical aptitude in mechanical and electro-mechanical fields Able to use hand, power tools and electrical testing equipment such as a multi meter. Solid knowledge base in use of personal computers. Attention to detail. Good communication and listening skills. Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Controls Technician - Supporting the Systems That Power Automation We're seeking a Controls Technician to assist with the setup, troubleshooting, and maintenance of automation and control systems in real-world industrial environments. This position offers hands-on experience with cutting-edge technology and the opportunity to support projects that integrate electrical, mechanical, and software systems. What You'll Be Doing: Install, wire, and test control panels, PLCs, sensors, and other automation components Troubleshoot and repair control systems to ensure reliable performance Assist engineers with system setup, testing, and commissioning Read and interpret electrical schematics, wiring diagrams, and control logic Document system updates, maintenance activities, and technical findings Collaborate with cross-functional teams to ensure smooth implementation and operation What We're Looking For: Associate degree or technical certification in Electrical Technology, Automation, or related field Practical experience with control systems, PLCs, or industrial automation Strong understanding of electrical fundamentals and troubleshooting techniques Clear communication skills and attention to detail Willingness to travel for on-site work and support project deployments

TSC is seeking an entry level Elecrtomechanical Technician with experience or interest in cable assemblies, electronic components, and precision mechanical work to support work in our Plymouth, MA location. The ideal candidate is hands-on, detail-oriented, and knowledgeable about manufacturing best practices within an ISO9000-compliant environment. Key Responsibilities Manufacture and assemble electronic assemblies, including: Soldering (surface-mount and through-hole) Crimping a wide range of terminals and connectors Heat-shrink applications and harness routing Work with printed wiring assemblies (PWAs) and printed circuit boards (PCBs), including component installation, inspection, and rework. Fabricate and modify sheet metal components using shop tools. Operate machinery such as but not limited to: drill press, precision hand tools, measurement and inspection equipment (calipers, micrometers, torque tools), torque fasteners and mechanical assemblies to specified values using calibrated tools. Follow all manufacturing best practices, workmanship standards, and engineering documentation (schematics, drawings, work instructions, travelers). Ensure work adheres to ISO9000 quality management procedures. Conduct in-process inspections and maintain accurate production records. Collaborate with engineering, quality, and production teams to support continuous improvements. Required Qualifications 1-2 years of experience in a manufacturing or an electronics assembly role (or equivalent hands-on background) US Citizenship and the ability to obtain and maintain a government security clearance. Proficiency in electrical cable assembly and soldering (IPC-620 or IPC-610 certification is a plus), crimping and use of manual/automated crimp tools Efficient in PCB handling and ESD-safe work practices Strong mechanical aptitude and ability to read engineering drawings. Understanding of ISO9000 or similar quality standards. Ability to work independently, manage multiple tasks, and meet production deadlines. Strong attention to detail, quality, and safety. TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including Employee Stock Option Plan (ESOP) participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. TSC is a growing organization with unlimited opportunity! Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Make your mark at the world's largest HVAC company The HVAC Controls Technician II position for Building Automation Systems (BAS) is critical to our success in ensuring our customers receive top-notch service as it relates to the installation, programming, and service of commercial digital control systems while maintaining quality and profitability. The position will be responsible for providing technician support for BAS, maintenance agreements, system upgrades, and controls related service requests. Location: Boston, MA What you will do: Provide responsive and professional customer service with the goal of building and maintaining long-term customer relationships Identify, analyze, diagnose, and troubleshoot direct digital control systems Perform preventative maintenance, commissioning, and replacement modifications as needed or requested by customers Maintain building automation systems by inspecting trend logs, reports, schedules, applications, hardware, and programming Provide controls technical support to HVAC technicians Create and/or implement programming and graphics for new installations and retrofit projects Commission controls installations and verify that control sequences meet scope, design, or specifications Provide training and follow-ups for Customers and operations personnel Complete work orders and review with customers for accuracy Continually look for ways to improve our processes and ability to serve our customers effectively What's in it for you: Factory Certified Training, Online Training Courses, or other professional on the job training in the HVAC Industry The opportunity to work on all types of commercial equipment and cutting-edge technologies such as Intelligent Equipment, Magnetic Bearing Technology, and VRF Technology Daikin Applied provides technicians with company vehicle, laptops, mobile devices, and other technologies The ability to make an impact and shape your career with a company that is passionate about growth The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best The opportunity to work for a leading innovator in HVAC and make a difference in environmental initiatives to create a more sustainable world for all Minimum Qualifications: High School Diploma or GED. 3+ years of related experience with increasing responsibility. Valid driver's license with acceptable driving record. Ability to lift 50lbs with or without an accommodation. Required license(s) and/or training card as required by local law district. Preferred Qualifications: Experience in BAS, HVAC, or related industry. Proficiency with test instruments and calibration tools. Competency in operation of engineering/commissioning tools, DDC controllers and field devices, BACnet protocol fundamentals. Competency in the operation of HVAC equipment and controls. Ability to understand written sequences of operation. Ability to read low voltage wiring diagrams and controls flow diagrams. Niagara AX and/or Niagara 4 certification. Experience with any common integration protocols such as: BACnet MST / IP, LON, Modbus TCP / RTU, Ethernet OIP, MQTT, or SQL. Strong computer skills, including computer networking fundamentals. Good verbal and written communication skills. Customer-focused, results-oriented professional, and strong team player. Motivated self-starter that demonstrates initiative. Ability to manage multiple priorities and stay organized. Current first aid / CPR card. The typical hourly pay rate for this position ranges from $37.90 - $58.70 in MA. The range displayed represents the pay range for all positions in the job grade which this position falls. Individual base pay will depend on a wide range of factors including your skills, qualifications, experience, and location. If you're looking for an engaging career with growth opportunities in a supportive environment, you'll love a career at Daikin Applied!

The Automation Technician provides hands-on, technical support for new and existing automated processes. Primary functions will include working with and troubleshooting PLC's, vision systems, and other automated control systems, preventive maintenance, new equipment installations, and integrations. This position is based in a highly technical manufacturing facility and requires strong attention to detail, commitment to quality, a high degree of flexibility, good communication skills, a desire to learn, and the ability to work in a safe manner. PRINCIPAL DUTIES AND ESSENTIAL FUNCTIONS: Diagnose and troubleshoot PLC, vision systems, and other automated control systems Diagnose and troubleshoot equipment problems, overhaul production machinery and build experimental Provides troubleshooting support for manufacturing equipment Diagnose and troubleshoot motor/drive controller issues Support internal projects Additional REQUIRED Qualifications/Skills : Associate's degree in electrical engineering or certificate in electrical field of study Proficiency with PCs and Rockwell Automation PLC programming, variable-speed drives, vision systems, servo-systems, industrial sensors and Relay Ladder Logic Panel-view, Factory Talk, or other operator interface programming Experience completing and documenting preventive and non-routine maintenance Excellent interpersonal, communication and problem solving skills Additional PREFERRED Qualifications/Skills : ISO 9001 or 13485, CFR 820 Journeyman or Master Electrician License Strong PC Skills - AutoCAD and Microsoft Office applications Ability to adjust, replace and/or repair mechanical drive components, chain & sprockets, pulleys, bearings, and gearboxes Ability to troubleshoot, replace and/or repair solenoids, cylinders, and other pneumatic systems Knowledge of slitting and winding methods, equipment, and procedures 5+ years manufacturing experience troubleshooting and repairing manufacturing equipment Experience operating scissor lifts and/or forklifts

Schedule: Thursday, Friday, Saturday, Sunday, Monday - 6:00am to 2:30pm Pay Range: $34-38/hr, depending on overall skills and experience OVERVIEW OF ROLE: The Electromechanical Technician will be responsible for carrying out assembly, maintenance, and troubleshooting of control systems infrastructure and equipment. They will be responsible for both low-voltage control wiring and higher-voltage power wiring and will work on a variety of internally developed and third-party systems and machines. They will work closely with Controls Engineers and Maintenance Mechanics on the Manufacturing team, as well as both technicians and engineers from a variety of adjacent working groups. for all in-plant automation devices such as Allen Bradley PLC's, HMI's and VFD's.. The Electromechanical Technician will assist in accurate data collection for MES, Kepware and SCADA systems. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Perform maintenance (corrective, preventive, predictive, routine, and troubleshooting) on instrumentation systems and components in a safe, efficient, and compliant manner. * Wire, test, and troubleshoot control panels and individual electrical subcomponents. * Assemble control systems infrastructure and install third-party equipment such as power meters, pumps, pressure sensors and the like. * Read and mark-up electrical schematics. * Assist with maintaining all equipment programs database. * Follow company and industry workmanship standards for assembly and electrical work. * Follow Lock-Out Tag-Out (LOTO) procedures as-needed. * Set up and troubleshoot simple ethernet communications networks. * performing routine and emergency maintenance of the facility's industrial electrical and control systems and equipment. * Recommend component replacement or upgrades when items become obsolete or are at end of life. * Assist in maintaining building SCADA systems to ensure all are functioning as designed. * Continuously improve the reliability of current systems * Ability to effectively communicate with co-workers and take direction from others. * Ability to work in a fast-paced environment, with multiple and changing priorities while maintaining strong attention to detail and a high level of accuracy. * Other job duties as assigned EDUCATION AND/OR EXPERIENCE: * 2 - 4 years of relevant experience * Familiarity with the basic concepts of PLCs, HMIs, SCADA systems, and networking * Familiarity with cGMP/GMP. * Strong understanding of automated manufacturing equipment and programming required. * Knowledge of proper wiring and cabling standards and techniques (Clean termination, ferruling, grounding & bonding, strain relief, etc.) * Proven experience with troubleshooting equipment problems and performing complex system tests required. * Rockwell certification preferred. * Proficient in MS Word, Excel, PowerPoint required. * Experience with databases, process monitoring systems and MES (manufacturing execution system) / information systems. * Valid Massachusetts Driver's License required. * Know the proper use of hand and power tools. * Experience in a food processing & manufacturing environment is a plus. PHYSICAL REQUIREMENTS AND ENVIRONMENT: * Must have good vision and manual dexterity. * Able to sit / stand for prolonged periods at a desk and working on a computer. * Must be able to work in a cold environment and in tight areas. * Able to bend, push, carry, twist, and lift up to 50lbs without difficulty on a continuous basis. * This position requires participation in our mandatory respiratory protection program with respect to some essential tasks. Performance of confined space entry is also required with respect to some tasks which are essential to this job. * Loud Noise * Perform tasks in both cold and hot work environments. * Company provided Personal Protection Equipment (PPE) must be worn while on the production floor Exciting Benefits Await You! * Enjoy top-tier Medical, Dental, Vision coverage. * Pamper your furry friends with Pet Insurance. * Stay fit with our Wellness Plan and Free Gym Access. * Boost your skills with Employee Tuition Reimbursement. * Unlock endless opportunities with College Scholarship for dependents. * Reap the Rewards of Our Bonus Program Available to Our Salary and Hourly Employees. * Receive a Generous 401k Company Match. * Take advantage of Competitive Paid Time Off. * Elevate Your Safety Net with Company-Sponsored Life Insurance Coverage. * Receive Relocation Assistance for a Smooth Transition. * Earn Rewards through our Employee Bonus Referral Program. * Elevate Your Workplace Experience with Community Impact Opportunities. * Celebrate Together with Employee Appreciation BBQs, Happy Hours, Birthdays, & More! Opportunity Calls! Unsure if you meet all requirements? Don't hesitate, apply! Our recruitment process is prompt and transparent. Your resume will receive swift attention from our talent professionals. If chosen, you'll undergo a recruiter phone screen, followed by interviews with key team members. We value your potential. At Home Market Foods, we champion equal opportunities for all, prohibiting discrimination based on race, religion, gender, and more. Our commitment extends across all aspects of employment, ensuring a fair and inclusive workplace. At this time, Home Market Foods will not sponsor applicants for employment authorization for this position for the following work visas: STEM OPT EAD, H-1B, H-1B1, E-3, O-1, J-1, or TN

A challenging and exciting career is waiting for you! General Dynamics Electric Boat has a proud history dating back to its incorporation on February 7, 1899, and the delivery of the first practical submarine to the U.S. Navy the following year. During the ensuing century, Electric Boat has been at the forefront of every innovation in submarine technology. Today, we are the nation's premier designer and builder of nuclear submarines. We deliver the advantage that protects our sailors, our families and our freedom! Benefits Medical, Dental, Vision Prescription Coverage Health and Wellness Programs 401K Commuter/Van Services Paid Vacation and holidays Paid training Shift Differential for 2nd and 3rd shifts Advancement Opportunities Learn more at gdeb.com/careers The 3D Metrologist in the Accuracy Control Group of the Quonset Point Engineering Department performs 3-dimensional measurement and analysis services for the facility. Responsibilities include, but are not limited to: Providing technical measurement support for construction activities, structural, mechanical and piping manufacturing at Quonset Point Performing 3-dimensional surveys, processing the data within a graphical analysis software package and develop analysis reports to identify specific measurement points relative to drawing specifications Ability to learn new instrumentation and software associated with 3-dimensional measuring as new technologies emerge Collection of high precision datasets via laser tracker, industrial photogrammetry, and various CMM / scanning technologies Click this link to learn more: ********************** ZxpF50 This is position is located at the Quonset Point facility in North Kingstown, RI. Qualifications Required: High School Diploma or equivalent Minimum 1 year of experience using 3-dimensional measurement equipment (Total Stations, photogrammetry, laser tracker, laser scanner, CMM) or Robotic programming Strong math background including strong knowledge of geometry and trigonometry Able to read and interpret blueprints, Geometric Tolerance, specifications and procedures Willing to support occasional travel to vendor sites Able to obtain and maintain a security clearance through the Department of Defense Preferred: Associate Degree in Surveying Technology or Engineering Technology Experience in land surveying or as a Metrology Technician Experience with a graphical analysis software package such as Spatial Analyzer Relevant Navy/Military experience Skills Strong mathematical, oral and written communication, computer and interpersonal skills Ability to work in a collaborative and team environment to meet organizational goals Independent thinking and problem solving abilities Physical Qualifications Climbing, Color Vision, Crawling, Kneeling, Light Lifting, Medium Lifting, Pulling, Pushing, Reaching, Stooping, Twisting Environmental Attributes Cold, Dry, Dusty, Fumes, Hot, Inside, Noise, Oily, Outside We can recommend jobs specifically for you! Click here to get started.

**Job Title: Electromechanical Technician** **Job Description** Join our dynamic team to assemble testing equipment, working collaboratively to build structures over the course of a week. These assemblies consist of various sub-assemblies where you will perform electro-mechanical and mechanical assembly, including wiring panels and crimping or stripping. Confidence in your electrical skills and the ability to use hand tools effectively are essential. **Responsibilities** + Assemble testing equipment with the team, focusing on various sub-assemblies. + Perform electro-mechanical and mechanical assembly of components. + Wire panels together and perform crimping and stripping tasks. + Utilize hand tools such as grinders and drills to complete assemblies. + Read and interpret schematics and wiring diagrams accurately. **Essential Skills** + Experience in wiring and crimping. + Ability to read work instructions, schematics, and wiring diagrams. + Proficiency with hand tools, including grinders and drills. + Strong electrical skills for assembly. **Additional Skills & Qualifications** + Experience with sub-assembly. + Skills in larger scale assembly of capital equipment. **Why Work Here?** Become part of a close-knit team where your skills are valued, and collaboration is key. Enjoy the opportunity to work on challenging and rewarding projects in a supportive environment. **Work Environment** Work hours are from 8 AM to 4:30 PM within a team of about five individuals. The dress code requires steel-toed shoes and jeans, providing a practical and comfortable work setting. **Job Type & Location** This is a Contract to Hire position based out of Somerville, MA. **Pay and Benefits** The pay range for this position is $26.25 - $29.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Somerville,MA. **Application Deadline** This position is anticipated to close on Jan 22, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

TSC is seeking an entry level Elecrtomechanical Technician with experience or interest in cable assemblies, electronic components, and precision mechanical work to support work in our Plymouth, MA location. The ideal candidate is hands-on, detail-oriented, and knowledgeable about manufacturing best practices within an ISO9000-compliant environment. Key Responsibilities Manufacture and assemble electronic assemblies, including: Soldering (surface-mount and through-hole) Crimping a wide range of terminals and connectors Heat-shrink applications and harness routing Work with printed wiring assemblies (PWAs) and printed circuit boards (PCBs), including component installation, inspection, and rework. Fabricate and modify sheet metal components using shop tools. Operate machinery such as but not limited to: drill press, precision hand tools, measurement and inspection equipment (calipers, micrometers, torque tools), torque fasteners and mechanical assemblies to specified values using calibrated tools. Follow all manufacturing best practices, workmanship standards, and engineering documentation (schematics, drawings, work instructions, travelers). Ensure work adheres to ISO9000 quality management procedures. Conduct in-process inspections and maintain accurate production records. Collaborate with engineering, quality, and production teams to support continuous improvements. Required Qualifications 1-2 years of experience in a manufacturing or an electronics assembly role (or equivalent hands-on background) US Citizenship and the ability to obtain and maintain a government security clearance. Proficiency in electrical cable assembly and soldering (IPC-620 or IPC-610 certification is a plus), crimping and use of manual/automated crimp tools Efficient in PCB handling and ESD-safe work practices Strong mechanical aptitude and ability to read engineering drawings. Understanding of ISO9000 or similar quality standards. Ability to work independently, manage multiple tasks, and meet production deadlines. Strong attention to detail, quality, and safety. TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including Employee Stock Option Plan (ESOP) participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. TSC is a growing organization with unlimited opportunity! Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Our innovative startup seeks driven, high performance, high energy independent achievers who can work in a multidisciplinary team to build a groundbreaking electric VTOL platform that will be the foundation for a range of high performance ultra quiet Vertical Flight Systems. Job Description MagLev Aero is seeking an electromechanical technician to help build its electric propulsion thruster system prototypes. In this role, you will fabricate and test electromagnetic assemblies, wire harnesses, and mechanical test equipment. You will also perform mechanical and electronics rework, calibrate sensors, and take quality assurance measurements. You will work alongside our engineering team on-site and your craftsmanship will be a key contribution to the success of this project. Location : This is an on-site position at MagLev Aero's office located in Boston's Seaport District. Expected Responsibilities : Create and test wire harnesses in accordance with drawings or detailed descriptions. Assemble, rework, and test printed circuit boards from a schematic. Wind and pot coils and other electromagnetic assemblies from drawings. Refine existing processes for better throughput or superior performance. Assemble electro-mechanical test fixtures and test articles. Perform quality measurements on parts and systems. Qualifications Desired Skills : Prior experience building harnesses: stripping, crimping, and bundling. Prior experience winding coils desirable. Prior soldering experience. Experience with hot air tools is desirable. Comfortable using basic electrical test equipment (oscilloscopes, multimeters, isolation testers) in a prototyping environment. Able to understand electrical schematics and mechanical drawings. Experience with 3D drafting tools (e.g. Solidworks, Fusion, NX) is a plus, as is electrical drafting (e.g. OrCAD, Altium, VeSys, Solidworks Electrical) Comfortable around high voltage, electrical power systems, and chemical solvents. Prior high voltage experience is desirable but not required. Attention to detail. Able to make precise measurements using calipers and micrometers. Able to lift at least twenty-five pounds and stand for periods of 30 minutes. Proficient with hand and power tools. Familiar with basic machine shop tools (e.g. band saw, drill press). Experience with lathes/machining (CNC) is desirable but not required. Experience with 3D printing is desirable. Able to work independently from a set of tasks. Interested in process improvement. A few years of hands-on experience in a related area (aerospace, automotive, job shop, university lab) is desirable. Additional Information All your information will be kept confidential according to EEO guidelines.

Our innovative startup seeks driven, high performance, high energy independent achievers who can work in a multidisciplinary team to build a groundbreaking electric VTOL platform that will be the foundation for a range of high performance ultra quiet Vertical Flight Systems. Job Description MagLev Aero is seeking an electromechanical technician to help build its electric propulsion thruster system prototypes. In this role, you will fabricate and test electromagnetic assemblies, wire harnesses, and mechanical test equipment. You will also perform mechanical and electronics rework, calibrate sensors, and take quality assurance measurements. You will work alongside our engineering team on-site and your craftsmanship will be a key contribution to the success of this project. Location: This is an on-site position at MagLev Aero's office located in Boston's Seaport District. Expected Responsibilities: Create and test wire harnesses in accordance with drawings or detailed descriptions. Assemble, rework, and test printed circuit boards from a schematic. Wind and pot coils and other electromagnetic assemblies from drawings. Refine existing processes for better throughput or superior performance. Assemble electro-mechanical test fixtures and test articles. Perform quality measurements on parts and systems. Qualifications Desired Skills: Prior experience building harnesses: stripping, crimping, and bundling. Prior experience winding coils desirable. Prior soldering experience. Experience with hot air tools is desirable. Comfortable using basic electrical test equipment (oscilloscopes, multimeters, isolation testers) in a prototyping environment. Able to understand electrical schematics and mechanical drawings. Experience with 3D drafting tools (e.g. Solidworks, Fusion, NX) is a plus, as is electrical drafting (e.g. OrCAD, Altium, VeSys, Solidworks Electrical) Comfortable around high voltage, electrical power systems, and chemical solvents. Prior high voltage experience is desirable but not required. Attention to detail. Able to make precise measurements using calipers and micrometers. Able to lift at least twenty-five pounds and stand for periods of 30 minutes. Proficient with hand and power tools. Familiar with basic machine shop tools (e.g. band saw, drill press). Experience with lathes/machining (CNC) is desirable but not required. Experience with 3D printing is desirable. Able to work independently from a set of tasks. Interested in process improvement. A few years of hands-on experience in a related area (aerospace, automotive, job shop, university lab) is desirable. Additional Information All your information will be kept confidential according to EEO guidelines.

K-Tek's core business is into temporary staffing, permanent placement and volume hiring. Since inception of our staffing solutions has grown multi-fold with global offices. We know what works best for our clients and what doesn't. This is the key differentiator and this is how we edge over the competition. Job Description Hi Kindly share accordingly. Key points to select the profiles : 1) Strong Post production support experience 2) Little experience with system admin role (All the profiles shared with me has good system admin experience, but production support at all. Please don't narrow the search only with system admin exp) 3) Good communication skills Location 1 - MTV CA Location 2 - Cambridge MA While sharing kindly share the location in which he is interested, moreover Interview mode - Google Hangout get their comfortability too. Description: L3 Technical Support Engineer Job Purpose: Handle complex technical support requests from Enterprise Travel customers. Monitor and support internal environments, applications and tools. Handle first level technical escalations as part of a support desk. Job Responsibilities: • Process support requests from customers, via email and telephone • Follow documented process flows and playbooks to resolve customer issues • Utilize debugging tools to triage partner issues autonomously • Accurately maintain case management system, and record status of work • Write code snippets under supervision • Respond to technical alerts, and troubleshoot as necessary • Identify when cases require escalation, and engage with higher support tiers to handoff cases • Identify opportunities for process improvements • Provide advanced technical troubleshooting of customer issues, including networking, and integration • It may be required to work with cross functional teams spread across multiple geographies • Provide mentoring and support to junior resources where appropriate Skills/Qualifications: • Technical support experience, preferably in Enterprise software, or the travel industry • Domain expertise - Contact center, Services, Tech Trouble shooting etc • System Administration experience • Expertise in web technology and protocols (HTTP, SSL, XML, FTP, etc) • Basic networking expertise and troubleshooting • Medium to advanced linux skills • Shell scripting experience • Experience reading, writing and troubleshooting at least one of Perl or Python • Experience with version control • Ability to read and construct XML • Familiarity with the Xymon open source product nice to have. • Strong analytical, troubleshooting and problem-solving skills • Strong attention to detail, and ability to follow processes Strong English oral and written communications skills to interact with customers and internal stakeholders • Proven ability to manage conflicting priorities under guidance • Experience working with teams in different timezones a plus • Experience documenting support workflows and processes • Development experience a plus • 3-5 yrs of experience providing technical support and environment support Additional Information All your information will be kept confidential according to EEO guidelines.