Controls technician jobs in Virginia Beach, VA

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

Team: X24 MANUFACTURING BUILD AUTHORITY Entity: Newport News Shipbuilding Yes Full-Time Shift: 1st Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: No Clearance Required: No - Clearance Not Required to Start Meet HII's Newport News Shipbuilding With more than 25,000 employees - including third-, fourth- and even fifth-generation shipbuilders - HII's Newport News Shipbuilding (NNS) division is the largest industrial employer in Virginia. We're the sole designer, builder and refueler of U.S. Navy nuclear aircraft carriers and one of two providers of U.S. Navy nuclear submarines. Our diverse and innovative team of professionals ranges from skilled trades to project managers, engineers and software developers to solution architects, technical subject matter experts, and system users. Anchored in our rich, 135-year history, we collaborate together at the forefront of technology, manufacturing, and integration of the most powerful and survivable naval ships in the world. Want to be part of the team? Apply today! We look forward to meeting you. The Role Develops and writes programs for numerically controlled machines using engineering specifications and drawings. Analyzes engineering drawings to define configuration of parts and determine type and sequence of machine operations. Develops programs for machining parts, tools, or sheet metal on numerically controlled machine tools. Makes proper cutter selections for each part, taking into consideration such factors as speeds, types of cutters, feeds, and control system limitations. Selects program routines for the most efficient computer calculation of dimensional and machining requirements for each part. Tests and modifies existing parts programs for engineering changes or program improvements.Must Have Bachelor's Degree and 2 years of relevant exempt experience; Master?s Degree and 0 year of relevant professional experience One of the following may be used as an equivalent to Bachelor's Degree for Information Technology Related Positions Only: NNS Apprentice School graduate Navy Nuclear Power School (NNPS) graduate Associate's Degree or other formal 2 year program and 2 years of relevant exempt experience or 4 years of relevant non-exempt experience Military Paygrade E-5 or above military experience High School/GED and 4 years combined of Manufacturing, Shipbuilding, Trades, Military experience or other relevant exempt experience High School/GED and 8 years combined of Manufacturing, Shipbuilding, Trades, Military experience or other relevant non-exempt experience A relevant professional certification can be substituted for a Bachelor's Degree. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. HII's diverse workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Working at HII is more than a job - it's an opportunity to build a future. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more. Some benefits may vary depending on your specific division or work location. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. U.S. Citizenship may be required for certain positions. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to ************************** and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Additionally, you may also call ************** for assistance. Press #2 for Newport News Shipbuilding.

Specific Accountabilities Controls Technician / Industrial electrician with electronic and mechanical level experience in a food manufacturing environment. Some formal electrical/instrumentation education preferred. Electrical, electronic, pneumatic & mechanical knowledge, comprehension, and skills. AC/DC control circuits PLC Troubleshooting Ladder logic knowledge and basic programming skills Must have or be able to obtain a passport VFD's 120v, 240, 480v single and three phase power circuits 24v and 120v control circuits Use of hand tools, Multi-meters Analog & Digital, ammeters, amp probes etc. Work from manuals, prints schematics: basic skills in math & reading Good communication Skills, basic computer skills Planning and organizing skills Knowledge of programmable logic controllers (PLC)- Allen Gradley PLC 5, SLC 500- Siemens Job Specifications Ability to read, speak clearly, and understand detailed written and verbal instructions given in English. High school diploma or GED Three or more years of related mechanical experience and/or specific hydraulic, pneumatic or electrical training required. Ability to calculate figures and amounts such as percentages, area, circumference, and volume and apply concepts of basic algebra and geometry. Ability to solve practical problems and deal with a variety of concrete variables in situations. Must be able to follow standardized written directions. Must demonstrate ability to interpret a variety of instructions furnished in written oral, diagram, or schedule form. Required to stand, walk, use hands to finger, handle or feel; and smell. Frequently required to sit and talk or hear. Occasionally required to reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Must occasionally lift and /or move up to 50 pounds. Must have specific vision abilities to include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Physical Demands The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to walk, sit, talk, listen, reach with hands and arms, bend, squat and climb (ladders). The employee is required to use hands to handle, operate, feel objects, tools or controls. The employee must occasionally lift, push/pull and/or move up to 20 lbs. Work Environment The plant work environment will expose the employee to loud noise, food grade dust & odors, moving & vibrating machinery, heavy equipment, powered industrial trucks, heights, traffic, anhydrous ammonia, oil, electricity. The employee may be exposed to adverse weather conditions including extreme cold (50 degrees F), heat (80 degrees F), rain, snow, dust, smoke and odors. Allergens found inside the plant include: fish, shellfish, nuts, eggs, wheat, soy, milk and coconut. All applicants will receive consideration for employment without regards to race, color, national origin, age, sex, sexual orientation, disability, veteran, or marital status, genetic information or other protected status, covered by federal, state or local law. Equal Opportunity/Affirmative Action Employer

The Controlled Environment Technician I is responsible for certifying, testing, and maintaining Clean Rooms, hoods, and infusion centers in pharmacies, laboratories, and hospitals nationwide. This role involves national travel to service accounts, utilize job scheduling systems, provide customer service, and report on equipment performance. Essential Job Functions: Verify and certify Clean Rooms, Biological Safety Cabinets, Laminar Flow Hoods, Fume Hoods, and other controlled environment equipment for MTA accounts. Travel nationally to test, certify, and maintain/repair controlled environment equipment. Use Field Aware system for job scheduling, tracking, and time reporting. Utilize MS Excel for mathematical computations for customer reporting. Deliver high-quality customer service and reports on equipment performance. Report daily activities and field issues to the support center. Pass leads to Sales Representatives. Adhere to safety regulations and maintain clean work areas. Wear proper safety garments. Maintain the vehicle and equipment professionally. Diagnose problems, replace/repair parts, test, and make adjustments. Other duties as assigned by management. Physical Demands: Lift up to 50lbs. Overhead work. Carry equipment, climb ladders, sit, stand, lift, bend, hold equipment, and drive for extended periods. Position Type/Expected Hours of Work: Full-time position, typically Monday-Friday with variable hours based on job/facility requirements. Some nights, weekends, and overnight travel may be required. Travel: 75% or more travel required, with possible overnight stays. Qualifications: CETA, NEBB, or NSF certification preferred (not required initially). Obtain industry certifications within 2-3 years. Background in air balancing, biomedical, pharmaceutical, HVAC, environmental testing, and clean rooms preferred. 1-3 years of prior experience as a Field Service Technician. Strong mathematical, mechanical, and electrical aptitude. Basic computer skills and experience with Microsoft applications. Detail-oriented, proactive, with a passion for quality and accuracy. Highly organized, exceptional customer service skills, professional appearance, and behavior. Ability to travel, work flexible hours, and adjust schedules to meet customer needs. Commitment to the company's core beliefs of integrity, safety, and customer service. Disclaimer: The job description outlines general content and requirements, not exhaustive duties. Management may assign or reassign duties at any time. Reasonable accommodations may be provided for individuals with disabilities.

Engineering Tech I The purpose of this position is to design and prepare timely, safe and cost-effective natural gas infrastructure improvements including system replacements, relocations due to state, municipal, and private entity construction conflicts, system reinforcements, and system expansions for Virginia Natural Gas. Designs include applicable CAD drawings, permits, and cost estimates for system improvements which may include bridge attachments, railroad crossings and directional bore operations. The incumbent also coordinates customers & requirements with the various departments and other prevailing authorities. Position will reside at the Virginia Natural Gas corporate headquarters in Virginia Beach, VA. Functional Expertise: Provide quality control of geospatial data and mapping products Researches facility records in GIS and project as-builts Draft city, state and railroad right-of-way permits and traffic control plans as required. Business Acumen: Analyze construction proposals for DOT, municipal, and private projects for conflicts with existing gas utilities and propose recommendations to resolve conflicts Develop timely and accurate cost estimates for construction projects, new gas main installations, plastic and steel main replacements, reinforcements and other system support projects as required Engagement: Collaborates with engineers, construction, and operations to produce effective drawings Collaborates on facility relocations with outside parties including county, municipal and state government representatives, road contractors and developers Meet and negotiate with city and state officials, engineers, and construction contractors to resolve conflicts in a timely manner and relay Company policy, procedure, and other information relative to the gas industry Influence customer satisfaction by responding to customer needs, keeping customers informed and ensuring work is scheduled in an effective manner Driving Results: Create construction designs using MicroStation, AutoCAD, GIS and other applications Monitors projects to ensure on-time delivery of plans to state, county and municipal authorities Create a project AFE for design and prepare internal documents including ARM BCA/PWR Ensure that compliance with all engineering principles, gas operating standards, local code, state and federal rules, regulations, mandates and statutes is maintained by preparing and/or revising designs as necessary for all gas facilities installed Education and Experience: Required: BA/BS year degree with 3 years work related experience Knowledge of natural gas distribution system facilities Preferred: • Some level of GIS, engineering, or technical education or experience Or Equivalent academic education and experience Skills: Required: Valid driver's license Drafting ability - advanced proficiency One or more industry standard CAD Packages (MicroStation, AutoCAD, TurboCAD etc) - advanced proficiency Work Prioritization - advanced proficiency Ability to read, interpret and apply engineering and architectural plans - intermediate proficiency Excellent interpersonal communication skills Mathematical aptitude - intermediate proficiency Proficiency with variety of GIS concepts, practices, and procedures MS Excel, Word and PowerPoint - intermediate proficiency ArcGIS - basic proficiency ARM - basic proficiency Certifications/Licenses: Preferred: • GIS Certification Working Conditions/Physical Requirements: The incumbent works in an office environment with a hybrid schedule, 4 days per week with 1 remote day from home, and subject to change as business needs dictate. The incumbent may/will be exposed to varying outdoor weather conditions. The incumbent may/will be exposed to construction related activities This position occasionally requires prolonged standing or walking. This position occasionally requires the incumbent to reach above shoulder-level. This position occasionally requires the incumbent to bend, kneel, crouch, or crawl. This position requires the ability to lift up to 25 pounds. Local travel. Keyboarding required in approx. 80% - 100% of daily tasks Disclaimer: This information describes the general nature and level of work performed by employees in this job. The description is not designed to be a comprehensive inventory of duties, responsibilities, and qualifications required of employees in the job. Reasonable accommodation may be made to qualified disabled individuals for the performance of essential duties and responsibilities.

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations.Responsibilities Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness Provide technical support and training to field technicians and end-users as needed Qualifications Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems Familiarity with autonomous systems, marine navigation, and control systems is preferred Strong analytical and problem-solving skills with attention to detail Experience working with the DoD or government contracts is a plus Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands Ability to perform physically demanding work for extended periods of time, up to 12 hours/day Frequently and repetitively, lift, push and carry up to 20 lbs. The ability to carry 20 lbs. up and down stairs Ability to work outside for an extended period of time Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day Climb and maintain balance on ladders, platforms, or other high structures Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time Exposures to hazardous materials and ability to follow waste handling/disposal procedures Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3) . Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

Hiring Electrical Technicians Industry Leaders - Earn Your Full Potential Today! As an essential service, the demand for talented Electrical Technicians is at an all-time high. Michael and Son is looking for driven, self-motivated individuals with at least 1-2 years of relevant experience based on minimum qualifications to join our growing team. Moreover, our Electrical Technicians have the potential to make over $70,000 after their first year. Michael & Son's industry-leading training program helps grow skills and helps convert service technicians into managers over time. Your Role: Each day will be a unique and rewarding opportunity as you'll interact with our customer's troubleshooting equipment and provide electrical solutions. The best part is you're getting paid to not only meet our customers' needs but also build lifelong connections. Our highly motivated team members grow their earning potential from $100K to $175K a year and there is no ceiling to what you can make! Job Highlights Include: Fully stocked company vehicle + Gas Card Signing bonus up to $5000 for Technicians with Journeyman and Master licenses ONLY Year-round stability Ongoing training and mentorship Advancement opportunities Comprehensive benefits include health, dental, vision, and disability 401K 100% vested on your first day of employment (90-day waiting period) Paid time off Minimum qualifications: Excellent customer service skills/ability to interact with the public State-issued Journeyman Or Master License is a plus High level of motivation and great work ethic Sales experience (preferred) High School Diploma or equivalent Pass pre-employment drug test and background check Valid driver's license and insurable driving record Must be able to fluently speak, read, and write in the English language Michael and Son Services provides equal employment opportunities to all qualified applicants for employment and prohibits discrimination and of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #MSNP1

HVAC Truck Based Senior Controls Technician What you will do Perform HVAC Control systems programming, troubleshooting, installation, commissioning and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components. Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment. Provide front line technical and repair support through effective communications with Johnson Controls customers. Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers. Be part of an expanding team of the best technicians in the industry while you build career with a first-class global organization. How you will do it Loading Johnson Controls field and network level controller software. Performing commissioning and system diagnostics for all levels of system controllers as well as end devices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation. Keeps management and JCI contractor or customer informed of job progress and issues. Calibrates systems requiring basic electronic test equipment. Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation. Documents changes and provides information for as-built documentation. Execute company sponsored as well as personally initiated training to insure the highest level of knowledge and capability are maintained Engage with customers to fully understand their systems and needs. Communicates with the JCI contractor or customer upon arrival and before leaving the work site. Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety. What we look for Required: Strong understanding of HVAC systems, sequence and applications Demonstrated technical aptitude in mechanical and electro-mechanical fields Able to use hand, power tools and electrical testing equipment such as a multi meter. Solid knowledge base in use of personal computers. Attention to detail. Good communication and listening skills. HIRING HOURLY RANGE: $24.52 - $30.29 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** #techhiring Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job Description THOR Solutions is actively seeking a Mechanical Engineering Technician with expertise in Navy shipboard diesel engines to support the Naval Special Warfare Center Philadelphia Division (NSWC-PD) in Norfolk, VA. The Technician will provide full-time onsite contracted support to NSWCPD. This position is associated with an upcoming contract that THOR is pursuing, with an expected start in early January 2026. We are conducting preliminary, “contingent” hiring for roles associated with this contract. The work start is dependent upon THOR being awarded this contract. Typical Responsibilities: May include (but are not limited to) the following actions: Provide DRS support in the development and updating of Propulsion, Power and Diesel Engines Systems technical and ILS documentation. Technical and logistics documentation to be updated includes but is not limited to: Technical Manuals Personnel Qualification Standards (PQS) Depot Level Maintenance Standards (MS) Technical Repair Standards (TRS) Process Control Procedures Class Standard Work Templates PMS (MIPs & MRCs) EOSS APLs. Provide the technical support necessary to incorporate changes to this documentation resulting from feedbacks, advisories, technical bulletins, Technical Warrant Holder (TWH) guidance, hardware configuration changes resulting from alteration installations, and other situations that arise which require the updating of technical and logistics support documentation. Provide assistance with the development and tracking of DRS Plan of Action and Milestones (POAMs) for related Propulsion, Power and Diesel Engines Systems programs and projects Location: Primarily onsite at THOR local office in Norfolk, VA. Travel: Up to 25% travel anticipated, for 1-2 week durations, to CONUS and OCONUS locations including: Philadelphia, PA, Beloit, WI, Detroit, MI, Peoria, IL, Washington DC, Norfolk, VA, Mayport, FL, San Diego, CA, Everett, WA, Pearl Harbor, HI, Bahrain, Sasebo, Japan, Yokosuka, Japan, Singapore, and various Naval facilities and ship new construction yard facilities. Typical Physical Activity: Primarily desk/computer work in an office environment. May involve: repetitive motion. Periodic visits to waterfront/shipboard environments. May involve: traversing shipboard environments (e.g., confined spaces, ladders, hatches) or vision. Eligibility for a SECRET Security Clearance is Required: This position requires eligibility for a Secret security clearance, to be obtained after hire. Only U.S. citizens are eligible for a security clearance; therefore, only current U.S. citizens will be considered for this position. Required Knowledge, Skills, and Abilities: High School diploma, GED, or equivalent. At least ten (10) years of recent, relevant hands-on experience in the area of diesel propulsion and power generating systems. Four (4) years of experience with US Navy diesel engine applications, specifically FM-Pielstick, FMOP, Caterpillar, MTU and/or Isotta Fraschini. Three (3) years of experience supporting the US Navy DRS Program. To include experience with the following: Shipboard Automated Maintenance Manager (SAMM) Conducting DOCTOR diesel engine performance analyses (DEPA) Reviewing DOCTOR combustion analysis data and providing technical recommendations to correct out-of-parameter conditions. Ability to communicate effectively. Benefit Offerings: Along with competitive pay, THOR offers a comprehensive benefits package including: Paid Time Off (accrued) Paid Holidays 401(k) with employer match and traditional/Roth options Medical Insurance (3 plan options) + TRICARE Supplemental Coverage Dental Insurance (2 plan options) Vision Insurance Plan Healthcare and Dependent Care Flexible Spending Accounts Commuter/Transit Benefits Basic Life/AD&D, Short-Term and Long-Term Disability Insurance Supplemental Life Insurance Pet Benefits Legal Resources ID Theft Benefits Employee Assistant Plan and Work-Life Program Voluntary Leave Transfer Program Tuition Reimbursement Program Employee Referral Program Please be aware that many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. Founded in 2009, THOR Solutions, LLC (THOR) is a rapidly growing Center for Veteran's Excellence (CVE) verified Service-Disabled Veteran-Owned Small Business (SDVOSB) providing mission critical support across the Department of Defense, Department of Homeland Security, federal civilian agencies and commercial maritime industry, worldwide. THOR provides innovative and tailored expertise in multidisciplinary engineering, project and program management, business and financial management, technical support, integrated logistics support, training support, fleet support, corporate operations support, assessments and studies. THOR is privileged to deliver service solutions to the nation's most complex military, public sector and industry challenges. THOR is proud to be an Equal Opportunity Employer, including veterans and individuals with disabilities. THOR considers all qualified applicants for employment without regard to legally protected characteristics. This policy applies to all terms and conditions of employment. If you are an individual with a disability and would like to request a reasonable accommodation as part the employment selection process, please contact us at *************************** or **************. Powered by JazzHR VBFzUX8hYL

Working Title *Internal Only* Building Automation Controls Technician 00718 Role Title Trades Technician IV Position Number 00718 FLSA Exempt Appointment Type Full Time Type of Posting Current CNU/Agency Employees Only Is Sensitive Position? No If Sensitive Position, please paste statement Designated Personnel Yes Responsible Employee This position is designated as a "responsible employee" who has the authority to redress sexual violence, who has the duty to report incidents of sexual violence or other student misconduct, or who a student could reasonably believe has this authority or duty. If Designated Personnel, please paste statement This position is a "designated position" meaning this position could potentially be required to work (depending on the event) during an emergency closing. Statement of Economic Interest No If Statement of Economic Interest, please paste statement Is this a restricted position subject to availability of funding? No If Restricted Position, please paste statement Departmental Objective Facilities Management is responsible for maintaining campus buildings utilizing the carpentry, plumbing, electrical and HVAC trades as well as housekeeping and floor maintenance. Purpose of the Position This position provides technical expertise and support on instrumentation and controls (I&C) for building HVAC systems, mechanical systems, energy generation, lighting systems, and distribution systems. This includes troubleshooting, diagnostics, installation, repairing, programming, commissioning, and related work on building automation and energy management systems (BAS/EMS) and I&C. The position is responsible for identifying, evaluating, implementing, and programming of new instrumentation and controls technologies; ensuring reliability, service, efficiency, and efficacy of existing BAS/EMS and I&C. Will support the HVAC shop as needed. Will work with Energy Manager to identify and implement energy initiatives with minimal impact to campus comfortability. Colloborate with multiple Facilities teams and IT Services to ensure BAS system is updated and upgrades are performed regularly. This position serves as the organization's sole subject matter expert and holds responsibility for expert guidance and standards in Facilities Management. Prepares material and labor cost data for renovation projects. Assist the Director in budget control. Works with outside contractors on contract work to inspect and give guidance on the university's specifications. Acts as project manager/contract administrator on all Controls Projects for in-house projects and work performed by contractors. Reviews and approves all project manuals [specifications] for Building Automation Systems. Writes scopes of work. Procurement of materials and supplies, using small purchase credit card and eVA. This is a designated position and reports as directed during emergency closings. Knowledge, Skills, and Abilities Related to Position * Skilled in troubleshooting automated building controls and HVAC systems, devices, equipment, and sensors. * Ability to calibrate sensors and develop and implement test procedures. * Ability to develop and implement automated controls strategies for building electrical and mechanical (HVAC/Plumbing) systems and to create control programs based off university need and/or initiatives. * Ability to maintain, diagnose, calibrate, and repair fume hoods. * Strong knowledge of HVAC systems, Control theory, and energy management principles. * Ability to read and understand drawings (schematics), block diagrams, flow charts, service manuals, and wiring diagrams, and to create electrical, mechanical, and controls-related field sketches. * Ability to write custom analytics programs to assist with Fault Detection * Highly skilled in the use of electronic and electrical testing devices. * Strong analytical skills and ability to analyze and solve practical problems with building systems and automated controls. * Ability to work in a team environment and communicate effectively both orally and in writing. * Ability to respond to on-call emergencies Education, Experience, Licensure, Certification Required Education Required: * High school graduate or equivalent education/experience that equates to a high school diploma * Valid driver's license * Journeyman License in the HVAC trade * Tridium Niagara 4 Technical Certification Experience Required: * Experience in the HVAC field * Experience in Building Automation Systems Additional Consideration(s) Education Preferred: * Tridium 4 Certification Level 2 or higher Experience Preferred. * Experience creating block programming Salary Information Starting at $68,534, Commensurate with Education and Experience. CNU Information This position includes Commonwealth of Virginia and Christopher Newport University employee benefits. CNU offers a comprehensive benefits package to include retirement plans, medical, dental, vision, and a variety of other options. Available leave includes vacation, sick time, personal time, and volunteer/service leave. State employees are eligible for discounted travel, banking, legal and retail services, among others. To view more information about our benefits, please visit ***************************** Role Code 79034 Conditions of Employment * This position is an internal posting, open to Current CNU employees only. * This is a classified position. New and returning classified employees are required to complete a 12-month probationary period. * Selected candidate must attend a 2-day New Employee Orientation Program. * Ability to respond to on-call emergencies Is this position telework eligible? No Telework Eligibility Disclaimer Physical/Cognitive Requirements Light Lifting (less than 20 lbs.) Essential Moderate Lifting (20-50 lbs.) Essential Heavy Lifting (more than 50 lbs.) Essential Pushing/Pulling Essential Standing Essential Sitting Essential Bending Essential Walking Essential Climbing Essential Reaching Essential Repetitive Motion Essential List other physical requirements Emotional Demands Fast Pace Essential Average Pace Essential Multiple Priorities Essential Intense Customer Interaction Essential Multiple Stimuli Essential Frequency Changes Essential Mental/Sensory Demands Memory Essential Reasoning Essential Hearing Essential Reading Essential Analyzing Essential Logic Essential Verbal Communication Essential Written Communication Essential List other mental/sensory requirements Posting Detail Information Posting Number PS1182P Number of Vacancies Posting Date 12/17/2025 Closing Date 01/02/2026 Open Until Filled No Special Instructions to Applicants CNU will only accept online applications through the jobs.cnu.edu website. Online applications must be received by midnight on the closing date indicated in a job announcement. Faxed, emailed, hand-delivered or mailed applications and attachments will NOT be accepted. Applicants are welcome to complete an online application by using computers located in the Office of Human Resources. Address: CNU North - 321 Hiden Boulevard, Suite 101, Newport News, VA 23606. Public computers are also available in nearby libraries and at the Virginia Employment Commission. Address: 600 Butler Farm Road, Hampton, VA 23666 (M-F 9am-4:30pm). In order to be considered for this position, your application must provide evidence of experience and/or education supporting the requirements outlined in the posting. We encourage you to be clear and specific when describing your experience. *Responses to supplemental questions alone are not considered evidence of experience and/or education. This position is an internal posting, open to Current CNU employees only. Quick Link for Direct Access to Posting *********************************** Advertising Text EEO/Diversity Statement(s) Christopher Newport University, an EO Employer, is fully Committed to Access and Opportunity. Notice of Non-Discrimination & Title IX Policy Statement Reasonable Accommodation Request Christopher Newport University (CNU) will make a reasonable effort to accommodate persons with disabilities in the application and/or interview process. Persons with disabilities who require accommodation should contact the CNU Human Resources Office by calling **************. Alternative Hiring Process In support of the Commonwealth's commitment to inclusion, we are encouraging individuals with disabilities to apply through the Commonwealth Alternative Hiring Process. To be considered for this opportunity, applicants will need to provide their Certificate of Disability (COD) provided by a Certified Rehabilitation Counselor within the Department for Aging & Rehabilitative Services (DARS). Veterans are encouraged to answer Veteran status questions and submit their disability documentation, if applicable, to DARS to get their Certificate of Disability. If you need to get a Certificate of Disability, use this link: ********************************************** or call DARS at ************. Background Check Applicant finalists are required to complete a CNU sponsored background check. After accepting employment, individuals are required to complete a USCIS Form I-9 (employment eligibility verification) and present documentation from the USCIS List of Acceptable Documents that establishes both their identity and employment authorization to work in the United States. The provided documents will be verified through the Department of Homeland Security E-Verify website.

This role involves providing hands-on technical support for maritime software systems, primarily through pier-side visits to vessels for the installation and configuration of SAMM software. The technician will troubleshoot and resolve software configuration issues both on-site and remotely, escalating to technical service centers when necessary. In addition to system setup, the position includes delivering personalized shipboard training, responding to help calls, and contributing to the development and maintenance of training materials and guides. Adherence to safety and quality policies is essential, and the technician may be assigned additional duties to support other departments as needed. This position requires a proactive, adaptable individual with strong problem-solving skills and a commitment to operational excellence in dynamic environments. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements - High School diploma and technical training. Undergraduate level education in Information Technology or Marine Engineering is advantageous but not required. - Must be able to obtain and maintain a DOD Security Clearance - Working knowledge of computers/computer networks and Microsoft operating systems - Ability to perform work onboard ships while underway but usually performed pier side - Ability to travel local, domestic, and internationally up to 50% of the time - Generally, for 1-week durations (depending on location)

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The role of the Engineering Technician 1 (Shipboard) is to provide day-to-day US Coast Guard Shipboard installation support for a variety of RF, audio, video, navigation, and communication systems. This position reports to the Installation Lead. Work Model: Onsite Responsibilities Essential Duties & Job Functions: * Working with SPAWAR ISEAs and other technical codes, program/project managers, and SMEs, the Engineering Technician I (Shipboard) will assist with the Shipboard installation and integration of complex audio/visual displays, various communication and electronic warfare systems, related ancillary and computer-based systems onboard naval ships and command centers worldwide. Accountable For: * We expect this employee to have experience in and be familiar with work being performed in or around industrial environments such as shipyards and Naval/Coast Guard bases and piers. As well as various and subcontractor Government sites. Job Requirements Mandatory: * Must be a U.S. citizen. * Must have or be able to obtain a minimum security clearance of secret. * Must have a minimum of 4 years shipboard installation/integration experience. * Outstanding oral and written communication skills. * Must have extensive experience in shipboard cableway work and firewatch. * Must have RF, multi-pin, and fiber connector building experience. * Must have experience with shipboard power systems installation * Must have High School diploma. * Must be willing to travel up to 75% CONUS/OCONUS. * Must be willing to work extended hours including weekends and holidays. * Must have a valid driver's license and reliable transportation. * Must have some supervision experience. * Must be able to successfully pass a pre-employment background check and pre-hire drug test. Working Conditions: * This is a full-time position in support of the Chugach integration and installation tasking team lead. The work may be performed at (Location TBD), industrial areas to include; shipyard, Navy/Coast Guard bases, shipboard and shore site locations. * Work is performed inside industrial environments and is subject to working around exposures to hazards that may cause bodily harm, cuts, bruises, burns, etc. * Work may also be performed outside, even during inclement weather. * Work may be performed at heights (aloft) where fall protection is required. * Work may be performed, including welding and cutting of metal. * Work may be performed off a ladder. Physical Requirements: * Ability to lift 45 lbs., climb vertical ladders, operate, and work around heavy machinery. * Work at heights (aloft). * Operate power tools safely. * Carry equipment and machinery around ships. * Ability to stand and walk most of the shift. * Kneel and crawl at the work site. * Crouch through void openings. * Safely evacuate ship during an emergency. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email ******************. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

Job Code **5351** \# of Openings **1** Apply Now (**************************************************** Requisition?org=GATEWAYVENT&cws=55&rid=5351) **Ghostrock** , a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking an **Engineer III** to join our team in **Norfolk, VA.** **Position Responsibilities:** + Ability to complete assigned tasks and to update government reps of any issues or concerns for further discussions and/or resolution. + Ability to independently plan and execute assignments, conferring periodically with the SME to keep him/her briefed on status of work and to discuss unusual technical problems. Completed work is reviewed for adequacy and conformance with established policies, precedents, and sound engineering concepts and usage. + Ability to Identify and resolve problems in each of the following areas: Hull, Electrical, Mechanical, Piping, Structural, Shipboard Hull, Electrical and Mechanical (HM&E). Provide recommendations to MARMC Code 900 SME/Manager for concurrence and approval. + Ability to diagnose, test, or analyze the performance of electrical components, assemblies, or systems. + Make, develop, and track trade specific training and programs. Provide recommendations to MARMC Code 900 SME/Manager for concurrence and approval. + Ability to provide technical guidance, and check drawings, memoranda, tests, reports, material requests and other documents, for technical adequacy and conformance with procedures. + Ability to establish and maintain objective quality evidence in support of Continuous Process Improvement efforts to improve technical products. + Ability to apply a variety of methods, procedures, and techniques to layout, install, align, overhaul, repair, and maintain numerous types of marine machinery, equipment, and systems that are technically more complex. + Ability to examine and troubleshoot to determine the extent of repairs required, materials, or parts needed, and to estimate the time required to complete repairs. Independently diagnose, plan, and complete projects or work orders involving major systems in their entirety. + Compile and maintain records documenting engineering schematics, installed equipment, installation or operational problems, resources used, repairs, or corrective action performed. + Ability to set up and operate standard or specialized testing equipment. + Review installation or quality assurance documentation. + Participate in training or continuing education activities to stay abreast of engineering or industry advances in Naval Ship Systems. + Train shipboard personnel to perform standard maintenance. + Confer with engineering staff and other personnel to resolve problems. + Draft working drawings or cross-sections of underground cables, as required for instructions to installation crew. + Ability to measure factors that affect installation and arrangement of equipment, such as distances to be spanned by cabling and piping. + Ability to assemble documentation packages and produce drawing sets which are checked by a higher authority. + Ability to review drawings and cost estimates for accuracy and conformity to standards and Ability to explain drawings to production or construction teams and provide adjustments as necessary. Supervise and train other technicians. + Ability to apply knowledge and skills gained through practical experience in the construction trades crafts, formal training to perform engineering design and cost estimates for ship maintenance, repair, new construction, alterations, civil, electrical, mechanical systems and equipment. + Ability to plan, develop, implement, coordinate and administer repair and construction projects generated by work requests, including the determination of scope of work, preparation of cost estimates, execution of original design concepts, preparation of detail drawings, preparation of technical requirements, contract preparation, and project administration. Provide recommendations to MARMC Code 900 SME/Manager for concurrence and approval. + Ability to make field investigations to ascertain existing conditions, to confirm customer requirements and to identify special problems and their solutions. + Obtain additional information from personal observation of the job site and coordinate with the customer. + Inspect, survey, and monitor equipment to determine long and short range maintenance requirements. + Collaborate with production control to schedule jobs and ensure that the necessary material and equipment are obtained to complete projects in a timely manner. + Prepare inspection reports noting deficiencies and any deviations from the original estimate and/or specifications. + Provide recommendations to MARMC Code 900 SME/Manager for concurrence and approval. **Position Requirements:** + Must be a U.S. Citizen + Must be able to obtain an Active Secret Clearance + Minimum High School Diploma and six (6) years of full-time hands-on technical experience in the repair of shipboard systems/equipment + Minimum of two (2) years full time hands-on technician experience in assembly, overhaul, repair, modification, operation, troubleshooting, and maintenance of shipboard systems and equipment. + Basic understanding of the Joint Fleet Maintenance Manual (JFMM) as related to ship repair and maintenance. Practical knowledge of Automated Work Request (AWR) write ups of structural, mechanical and electrical engineering concepts practices, regulations, policies, precedent, methods, and techniques. + General knowledge of work package procedures, blueprints reading, drawings and Navy ships technical manuals to verify technical characteristics of part numbers and required materials for ship maintenance and repairs. + General knowledge in the use of computer hardware and software programs required in the performance of assigned duties i.e. Microsoft Office, Excel and PowerPoint. Ability to analyze procedures and process in executing ship maintenance. **This position is located in Norfolk, VA.** **To apply: *************************************************** Requisition?org=GATEWAYVENT&cws=55&rid=5351** VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a diverse, team-oriented working environment and the opportunity to work with exceptional dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an EEO/AA employer. We invite resumes from all interested parties without regard to race, color, religion, creed, gender, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

The Controlled Environment Technician I is responsible for certifying, testing, and maintaining Clean Rooms, hoods, and infusion centers in pharmacies, laboratories, and hospitals nationwide. This role involves national travel to service accounts, utilize job scheduling systems, provide customer service, and report on equipment performance. Essential Job Functions: Verify and certify Clean Rooms, Biological Safety Cabinets, Laminar Flow Hoods, Fume Hoods, and other controlled environment equipment for MTA accounts. Travel nationally to test, certify, and maintain/repair controlled environment equipment. Use Field Aware system for job scheduling, tracking, and time reporting. Utilize MS Excel for mathematical computations for customer reporting. Deliver high-quality customer service and reports on equipment performance. Report daily activities and field issues to the support center. Pass leads to Sales Representatives. Adhere to safety regulations and maintain clean work areas. Wear proper safety garments. Maintain the vehicle and equipment professionally. Diagnose problems, replace/repair parts, test, and make adjustments. Other duties as assigned by management. Physical Demands: Lift up to 50lbs. Overhead work. Carry equipment, climb ladders, sit, stand, lift, bend, hold equipment, and drive for extended periods. Position Type/Expected Hours of Work: Full-time position, typically Monday-Friday with variable hours based on job/facility requirements. Some nights, weekends, and overnight travel may be required. Travel: 75% or more travel required, with possible overnight stays. Qualifications: CETA, NEBB, or NSF certification preferred (not required initially). Obtain industry certifications within 2-3 years. Background in air balancing, biomedical, pharmaceutical, HVAC, environmental testing, and clean rooms preferred. 1-3 years of prior experience as a Field Service Technician. Strong mathematical, mechanical, and electrical aptitude. Basic computer skills and experience with Microsoft applications. Detail-oriented, proactive, with a passion for quality and accuracy. Highly organized, exceptional customer service skills, professional appearance, and behavior. Ability to travel, work flexible hours, and adjust schedules to meet customer needs. Commitment to the company's core beliefs of integrity, safety, and customer service. Disclaimer: The job description outlines general content and requirements, not exhaustive duties. Management may assign or reassign duties at any time. Reasonable accommodations may be provided for individuals with disabilities.

Engineering Tech I The purpose of this position is to design and prepare timely, safe and cost-effective natural gas infrastructure improvements including system replacements, relocations due to state, municipal, and private entity construction conflicts, system reinforcements, and system expansions for Virginia Natural Gas. Designs include applicable CAD drawings, permits, and cost estimates for system improvements which may include bridge attachments, railroad crossings and directional bore operations. The incumbent also coordinates customers & requirements with the various departments and other prevailing authorities. Position will reside at the Virginia Natural Gas corporate headquarters in Virginia Beach, VA. Functional Expertise: + Provide quality control of geospatial data and mapping products + Researches facility records in GIS and project as-builts + Draft city, state and railroad right-of-way permits and traffic control plans as required. Business Acumen: + Analyze construction proposals for DOT, municipal, and private projects for conflicts with existing gas utilities and propose recommendations to resolve conflicts + Develop timely and accurate cost estimates for construction projects, new gas main installations, plastic and steel main replacements, reinforcements and other system support projects as required Engagement: + Collaborates with engineers, construction, and operations to produce effective drawings + Collaborates on facility relocations with outside parties including county, municipal and state government representatives, road contractors and developers + Meet and negotiate with city and state officials, engineers, and construction contractors to resolve conflicts in a timely manner and relay Company policy, procedure, and other information relative to the gas industry + Influence customer satisfaction by responding to customer needs, keeping customers informed and ensuring work is scheduled in an effective manner Driving Results: + Create construction designs using MicroStation, AutoCAD, GIS and other applications + Monitors projects to ensure on-time delivery of plans to state, county and municipal authorities + Create a project AFE for design and prepare internal documents including ARM BCA/PWR + Ensure that compliance with all engineering principles, gas operating standards, local code, state and federal rules, regulations, mandates and statutes is maintained by preparing and/or revising designs as necessary for all gas facilities installed Education and Experience: Required: + BA/BS year degree with 3 years work related experience + Knowledge of natural gas distribution system facilities Preferred: * Some level of GIS, engineering, or technical education or experience Or Equivalent academic education and experience Skills: Required: + Valid driver's license + Drafting ability - advanced proficiency + One or more industry standard CAD Packages (MicroStation, AutoCAD, TurboCAD etc) - advanced proficiency + Work Prioritization - advanced proficiency + Ability to read, interpret and apply engineering and architectural plans - intermediate proficiency + Excellent interpersonal communication skills + Mathematical aptitude - intermediate proficiency + Proficiency with variety of GIS concepts, practices, and procedures + MS Excel, Word and PowerPoint - intermediate proficiency + ArcGIS - basic proficiency + ARM - basic proficiency Certifications/Licenses: Preferred: * GIS Certification Working Conditions/Physical Requirements: + The incumbent works in an office environment with a hybrid schedule, 4 days per week with 1 remote day from home, and subject to change as business needs dictate. + The incumbent may/will be exposed to varying outdoor weather conditions. + The incumbent may/will be exposed to construction related activities + This position occasionally requires prolonged standing or walking. + This position occasionally requires the incumbent to reach above shoulder-level. + This position occasionally requires the incumbent to bend, kneel, crouch, or crawl. + This position requires the ability to lift up to 25 pounds. + Local travel. + Keyboarding required in approx. 80% - 100% of daily tasks Disclaimer: This information describes the general nature and level of work performed by employees in this job. The description is not designed to be a comprehensive inventory of duties, responsibilities, and qualifications required of employees in the job. Reasonable accommodation may be made to qualified disabled individuals for the performance of essential duties and responsibilities. About Southern Company Gas Southern Company Gas is a wholly owned subsidiary of Atlanta-based Southern Company (NYSE:SO), America's premier energy company. Southern Company Gas serves approximately 4.2 million natural gas utility customers through its regulated distribution companies in four states and approximately 600,000 retail customers through its companies that market natural gas. Other nonutility businesses include investments in interstate pipelines and ownership and operation of natural gas storage facilities. For more information, visit southerncompanygas.com . Southern Company (NYSE: SO ) is a leading energy provider serving 9 million customers across the Southeast and beyond through its family of companies. Providing clean, safe, reliable and affordable energy with excellent service is our mission. The company has electric operating companies in three states, natural gas distribution companies in four states, a competitive generation company, a leading distributed energy solutions provider with national capabilities, a fiber optics network and telecommunications services. Through an industry-leading commitment to innovation, resilience and sustainability, we are taking action to meet customers' and communities' needs while advancing our goal of net-zero greenhouse gas emissions by 2050. Our uncompromising values ensure we put the needs of those we serve at the center of everything we do and are the key to our sustained success. We are transforming energy into economic, environmental and social progress for tomorrow. Our corporate culture has been recognized by a variety of organizations, earning the company awards and recognitions that reflect Our Values and dedication to service. To learn more, visit *********************** . Southern Company invests in the well-being of its employees and their families through a comprehensive total rewards strategy that includes competitive base salary, annual incentive awards for eligible employees and health, welfare and retirement benefits designed to support physical, financial, and emotional/social well-being. This position may also be eligible for additional compensation, such as an incentive program, with the amount of any bonus/awards subject to the terms and conditions of the applicable incentive plan(s). A summary of the benefits offered for this position can be found here **************************************************** . Additional and specific details about total compensation and benefits will also be provided during the hiring process. Southern Company is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law. Job Identification: 16192 Job Category: Engineering Job Schedule: Full time Company: Virginia Natural Gas

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. We're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations. Responsibilities * Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions * Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality * Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions * Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards * Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations * Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations * Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness * Provide technical support and training to field technicians and end-users as needed Qualifications * Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred * Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry * Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems * Familiarity with autonomous systems, marine navigation, and control systems is preferred * Strong analytical and problem-solving skills with attention to detail * Experience working with the DoD or government contracts is a plus Benefits * Medical Insurance: Comprehensive health insurance plans covering a range of services * Saronic pays 100% of the premium for employees and 80% for dependents * Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care * Saronic pays 99% of the premium for employees and 80% for dependents * Time Off: Generous PTO and Holidays * Parental Leave: Paid maternity and paternity leave to support new parents * Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses * Retirement Plan: 401(k) plan * Stock Options: Equity options to give employees a stake in the company's success * Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage * Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands * Ability to perform physically demanding work for extended periods of time, up to 12 hours/day * Frequently and repetitively, lift, push and carry up to 20 lbs. * The ability to carry 20 lbs. up and down stairs * Ability to work outside for an extended period of time * Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes * Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain * Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day * Climb and maintain balance on ladders, platforms, or other high structures * Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing * Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time * Exposures to hazardous materials and ability to follow waste handling/disposal procedures * Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require "U.S. Person" status. As defined by U.S. law, individuals who are any one of the following are considered to be a "U.S. Person": (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

THOR Solutions is actively seeking a Mechanical Engineering Technician with expertise in Navy shipboard diesel engines to support the Naval Special Warfare Center Philadelphia Division (NSWC-PD) in Norfolk, VA. The Technician will provide full-time onsite contracted support to NSWCPD. This position is associated with an upcoming contract that THOR is pursuing, with an expected start in early January 2026. We are conducting preliminary, “contingent” hiring for roles associated with this contract. The work start is dependent upon THOR being awarded this contract. Typical Responsibilities: May include (but are not limited to) the following actions: Provide DRS support in the development and updating of Propulsion, Power and Diesel Engines Systems technical and ILS documentation. Technical and logistics documentation to be updated includes but is not limited to: Technical Manuals Personnel Qualification Standards (PQS) Depot Level Maintenance Standards (MS) Technical Repair Standards (TRS) Process Control Procedures Class Standard Work Templates PMS (MIPs & MRCs) EOSS APLs. Provide the technical support necessary to incorporate changes to this documentation resulting from feedbacks, advisories, technical bulletins, Technical Warrant Holder (TWH) guidance, hardware configuration changes resulting from alteration installations, and other situations that arise which require the updating of technical and logistics support documentation. Provide assistance with the development and tracking of DRS Plan of Action and Milestones (POAMs) for related Propulsion, Power and Diesel Engines Systems programs and projects Location: Primarily onsite at THOR local office in Norfolk, VA. Travel: Up to 25% travel anticipated, for 1-2 week durations, to CONUS and OCONUS locations including: Philadelphia, PA, Beloit, WI, Detroit, MI, Peoria, IL, Washington DC, Norfolk, VA, Mayport, FL, San Diego, CA, Everett, WA, Pearl Harbor, HI, Bahrain, Sasebo, Japan, Yokosuka, Japan, Singapore, and various Naval facilities and ship new construction yard facilities. Typical Physical Activity: Primarily desk/computer work in an office environment. May involve: repetitive motion. Periodic visits to waterfront/shipboard environments. May involve: traversing shipboard environments (e.g., confined spaces, ladders, hatches) or vision. Eligibility for a SECRET Security Clearance is Required: This position requires eligibility for a Secret security clearance, to be obtained after hire. Only U.S. citizens are eligible for a security clearance; therefore, only current U.S. citizens will be considered for this position. Required Knowledge, Skills, and Abilities: High School diploma, GED, or equivalent. At least ten (10) years of recent, relevant hands-on experience in the area of diesel propulsion and power generating systems. Four (4) years of experience with US Navy diesel engine applications, specifically FM-Pielstick, FMOP, Caterpillar, MTU and/or Isotta Fraschini. Three (3) years of experience supporting the US Navy DRS Program. To include experience with the following: Shipboard Automated Maintenance Manager (SAMM) Conducting DOCTOR diesel engine performance analyses (DEPA) Reviewing DOCTOR combustion analysis data and providing technical recommendations to correct out-of-parameter conditions. Ability to communicate effectively. Benefit Offerings: Along with competitive pay, THOR offers a comprehensive benefits package including: Paid Time Off (accrued) Paid Holidays 401(k) with employer match and traditional/Roth options Medical Insurance (3 plan options) + TRICARE Supplemental Coverage Dental Insurance (2 plan options) Vision Insurance Plan Healthcare and Dependent Care Flexible Spending Accounts Commuter/Transit Benefits Basic Life/AD&D, Short-Term and Long-Term Disability Insurance Supplemental Life Insurance Pet Benefits Legal Resources ID Theft Benefits Employee Assistant Plan and Work-Life Program Voluntary Leave Transfer Program Tuition Reimbursement Program Employee Referral Program Please be aware that many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. Founded in 2009, THOR Solutions, LLC (THOR) is a rapidly growing Center for Veteran's Excellence (CVE) verified Service-Disabled Veteran-Owned Small Business (SDVOSB) providing mission critical support across the Department of Defense, Department of Homeland Security, federal civilian agencies and commercial maritime industry, worldwide. THOR provides innovative and tailored expertise in multidisciplinary engineering, project and program management, business and financial management, technical support, integrated logistics support, training support, fleet support, corporate operations support, assessments and studies. THOR is privileged to deliver service solutions to the nation's most complex military, public sector and industry challenges. THOR is proud to be an Equal Opportunity Employer, including veterans and individuals with disabilities. THOR considers all qualified applicants for employment without regard to legally protected characteristics. This policy applies to all terms and conditions of employment. If you are an individual with a disability and would like to request a reasonable accommodation as part the employment selection process, please contact us at *************************** or **************.

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The Engineering Technician IV performs non-routine and complex assignments involving responsibility for planning and conducting a complete project of relatively limited scope or a portion of a larger and more diverse project, selects and adapts plans, techniques, designs, or layouts, and contacts personnel in related activities to resolve problems and coordinate the work, reviews, analyzes and integrates the technical work of others. Supervisor or professional engineer outlines objectives, requirements, and design approaches. Completed work is reviewed for technical adequacy and satisfaction of requirements. This incumbent may train and be assisted by lower-level technicians and perform one or a combination of the following: Work Model: Hybrid Responsibilities Essential Duties and Job Functions: * Designs, develops, and constructs major units, devices, or equipment; conducts tests or experiments; analyzes results and redesigns or modifies equipment to improve performance; and reports results. * From general guidelines and specifications (e.g., size or weight requirements), develops designs for equipment without critical performance requirements that are difficult to satisfy, such as engine parts, research instruments, or special purpose circuitry. Analyzes technical data to determine applicability to design problems; selects from several possible design layouts; calculates design data; and prepares layouts, detailed specifications, parts lists, estimates, procedures, May check and analyze drawings or equipment to determine the adequacy of drawings and design. * Plans or assists in planning tests to evaluate equipment performance. Determines test requirements, equipment modification, and test procedures; conducts tests using all types of instruments; analyzes and evaluates test results; and prepares reports on findings and recommendations. * Perform repairs, maintenance, and installation of supported electronic equipment. * Development and review of engineering documents and drawings and provide corrections as needed. * Maintain records and files of work and revisions. * Other duties as assigned. * Ability to travel and work independently. Job Requirements Mandatory: * Must be a U.S. citizen. * Must be able to obtain and maintain a secret clearance. * Completion of USCG or DOD technical A School. * 5 years of practical experience supporting USCG/DOD communication and navigation systems. * Must be able to successfully pass a pre-employment background check and pre-hire drug test. Preferred: * Associate's degree in engineering technology. Working Conditions: * On customer site as required to include ship and shore based units. Physical Requirements: * Ability to travel. * Carry and install equipment as required. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email ******************. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

Job Code **4493** \# of Openings **7** Apply Now (**************************************************** Requisition?org=GATEWAYVENT&cws=55&rid=4493) **Amee Bay, LLC,** a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking an experienced **Senior Engineering Technician** to join our team in **Norfolk, VA.** **Position Responsibilities:** + Shipboard tag-out, WAF programs and applicable Naval procedures / instructions. + Knowledge of OSHA safety practices. + Read and interpret blueprints, sketches, written technical instructions and manuals. + Working knowledge **Position Requirements:** · US Citizenship. · Must be able to obtain and maintain active Secret Security Clearance and Base Access; Candidates currently possessing an Active Secret Clearance are preferred. · High School Diploma or · GED. With Military "A" or "C" school(s), completion of a vocational, maritime, or journeyman training program. · Display knowledge of maritime mechanical systems. · Possess understanding of shipboard mechanical machinery equipment and systems such as main propulsion machinery, auxiliary machinery and hydraulics. · Knowledge of mechanical systems components such as valves, bearings, gears, remote operators, couplings, system alignment, etc. · Ability to read and interpret blueprints, sketches, written technical instructions and manuals, make red-line drawings, and design recommendations. + Three (3) years' experience in the development and updating of engineering operational procedures and diagrams utilizing ISODRAW and Adept Editor software (or equivalent) to incorporate required changes into existing operational procedures and diagrams for in-service ships and generate new operational procedures and diagrams for new acquisition ships in SGML and CGM formats (or equivalent) and conversion to PDF. · Minimum of Six (6) years' experience including practical engineering experience which should include the operation, test, maintenance, and repair of naval ship Hull, Mechanical, Electrical, Electronic, Ordnance equipment and systems. · Pay is based on experience. · Valid U.S. Driver's License. · Must pass drug screening as a condition of employment. · Candidates must furnish their own hand tools required for this position. · _Candidates must be willing to travel, CONUS & OCONUS at times._ **Preferred skills:** · Ability to develop and update engineering operational procedures and diagrams utilizing _ISODRAW_ and _Adept Editor_ software (or equivalent) · _Prior military experience directly related to the position or prior experience in the Maritime Industry preferred._ · Knowledge of Shipboard Engineering Space Systems Engineering operational procedures (EOP), Engineering operational casualty control (EOCC), Master casualty response procedure (MCRP), Master emergency plant procedure (MEPP), &Other Operational Sequencing System. · Knowledge of Shipboard electrical and electronic systems. **Position located in Chesapeake, Virginia.** Apply online at: *************************************************** Requisition?org=GATEWAYVENT&cws=49&rid=4493 Hourly wage is $25.00 - 32.00 based on experience. VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.