Controls technician jobs in Virginia

Day to day: Performs testing, observation, and inspection as directed in accordance with training and the specified procedures. Provides clear documentation of findings and results. Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager. Communicates information to Project Manager and other personnel as directed by the PM. Assists higher level technicians on complex tasks. Maintains assigned equipment and related calibration. Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management. Be responsible for maintaining quality standards on all projects.

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

JOB FUNCTION: Install, maintain, test, startup, and adjust a wide variety of electrical, electronic, electropneumatic, and electro-mechanical instrumentation and control systems/equipment. specific electrical and controls (E&C) systems include, but are not limited to, those associated with the electrical distribution system, turbine generators, chillers, boilers, incinerators, and HVAC equipment. MAJOR DUTIES AND RESPONSIBILITIES: * Read, interpret, and troubleshoot site E&C system deficiencies using electrical schematics, loop diagrams, control logics, mechanical drawings, and piping & instrument diagrams (P&IDs). Troubleshoot indiscriminately both the mechanical and electrical sides of systems. Maintain as-built logics, control loop diagrams, and documentation for all assigned systems. * Install, program, troubleshoot, calibrate, tune, preventive and predictive maintenance (condition monitoring), replace and repair all assigned E&C systems and all associated electrical, electronic, electropneumatic, and electro-mechanical components, including instrumentation and end-elements. * Troubleshoot hardware and software problems; perform simple programming, data base changes, and alarm log reviews; perform and maintain system back-ups and history database files; develop and install graphics to enhance operation and maintenance; and perform miscellaneous administrative functions as directed by E&C Engineer on site's microprocessor-based central control systems. * Program and troubleshoot ladder logic, both in hard-wired relays and PLC, for control systems. * Adjust control system parameters as required and/or directed by E&C Engineer. * Perform startup and checkout of newly installed E&C systems prior to operations turnover. * Complete ADC's as required. * Direct repair personnel as assigned. * Provide technical support as required to the E&C Engineer in the performance of his/her duties. * Perform all other duties as assigned. REQUIRED QUALIFICATIONS: * Journeyman Electrical License. * Working experience in electrical, industrial electronics, and electro-pneumatics. * Ability to read, interpret, and troubleshoot using electrical schematics, loop diagrams, control logics, mechanical drawings, and piping & instrument diagrams (P&ID's). * Five years working experience with 120VAC. * Working knowledge of PLC programming. Must be able to read, interpret, and troubleshoot ladder logic from computer terminal. * Knowledgeable in direct digital control (DDC) and other forms of electronic controls. * Hands-on experience in calibration and maintenance of electronic and / or electro-pneumatic control system equipment. * Hands-on experience in repair and troubleshooting of motor control centers and variable frequency drives (VFD's). * Ability to quickly learn operating and control systems for principal site-specific systems including, but not limited to, the electrical distribution system, turbine generators, chillers, boilers, incinerators, and * HVAC equipment. * Ability to comprehend written and oral instructions. * A willingness to work rotational shift if necessary, including days, evenings, and nights, as well as, overtime, on-call, call-ins, weekends, and holidays. EXPERIENCE: * Two years' experience in maintenance and repair on commercial/industrial/residential building equipment to include, but not limited to: cooling towers, pumps, heat exchangers. * Two years working experience with high voltage up to 15,000VAC, preferred. EDUCATION: High school, technical school, apprenticeship, trade school graduate or equivalent required. PREFERRED QUALIFICATIONS: * Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. * Understanding of Distributed Control Systems (DCS) and SCADA, preferred. * Understanding of HVAC building management systems (BMS), preferred. * NFPA-70E Training. * OSHA 10 Training. * CPR Training. * Certified and proficient in Foxboro computer systems to include hands-on and / or classroom experience, preferred. SECURITY: Must be a U.S. Citizen, able to obtain and maintain a Top-Secret Security Clearance. PHYSICAL DEMANDS: Incumbents may work in conditions that require operating industrial machinery/power tools and motor vehicles. Additionally, incumbents may participate in work that requires walking, bending, squatting, and carrying materials throughout the facility. Workplace conditions necessitate following strict safety guidelines and the use of Personal Protective Equipment. Work tasks requiring the incumbent to lift weight more than 50 pounds requires two or more persons. The physical demands described here are representative of those that an employee may perform on an occasional to regular basis while performing functions of this job. The work environment characteristics describe here are representative of those an employee may encounter on an occasional to regular basis while performing the functions of this job. Reasonable accommodations may be made to enable individuals to perform these functions. The Government has full and complete control over granting, denying, withholding, or terminating security clearances for Contractor employees. Decisions on clearance requirements for positions will ultimately be decided by the customer based on access and requirements. It is the responsibility of the Contractor to ensure these decisions are approved and executed based on the customers guidance. NOTE: The job description is not intended to be all-inclusive. Employees may be assigned other job-related Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Founded in 1989, SOSi is among the largest private, founder-owned technology and services integrators in the defense and government services industry. We deliver tailored solutions, tested leadership, and trusted results to enable national security missions worldwide. Job Description Overview *** This position is contingent upon contract award *** SOS International LLC (SOSi) is seeking an Electrician Control Technician to provide support for a Facilities and Life Support Contract at an overseas location. Essential Job Duties Thorough working knowledge of AC/DC Electronic theory and solid-state electronics, DDC controls, and computer operations. Familiar with Honeywell, Powers, and Carrier Building Management Systems or similar systems. Qualifications Minimum Requirements Active in scope Secret security clearance. High school (or GED equivalent), technical or trade school graduate or equivalent apprenticeship for the mechanical trades. Five (5) years of experience in maintenance and repair of pneumatic and electronic controls and in qualifications listed above. Additional Information Work Environment Must reside at an overseas location. Long hours, exposure to harsh weather and other hazardous conditions. Wearing of location appropriate PPE and clothing when in the field is required. A willingness to work rotational shift if necessary, including days, evenings, and nights as well. Working at SOSi All interested individuals will receive consideration and will not be discriminated against for any reason.

Riddleberger Brothers, Inc. is seeking to hire a talented and growth-minded individual to join our team as a Commercial HVAC Controls Technician. We offer career opportunities that allow you to be part of a team and grow as an individual. We offer you: Competitive pay Comprehensive benefits package Apprenticeship opportunities with a pathway to licensure Growth and development opportunities Scholarship program for our employees' children Discounts at major automotive, computer, and cell phone companies Employee referral incentives Available with certain positions, where necessary/required: Company mobile phone and/or tablet Company vehicle Company uniforms And much more! Our benefits package offers you: Medical, Dental, Vision, and Life Insurances Short-Term and Long-Term Disability Insurances Accidental Death & Dismemberment Insurance Health Care and Dependent Day Care FSA's Health Savings Account (HSA) Employee Assistance Program (EAP) 401(k) Plan with Roth IRA option Pet Insurance Annual Bonus Generous Vacation, Holidays, and Sick Time And much more! About us: We are a full-service plumbing, mechanical, HVAC service, controls, and design-build company. Main office is located at 6127 South Valley Pike, Mount Crawford, VA 22841 Parent Company - Comfort Systems USA (******************************* Primary purpose of this position: Perform installation, diagnosis, troubleshooting and repair of HVAC Building Automation and controls systems. Specific Job Duties: Possess extensive knowledge and experience with programming, troubleshooting, and repairing building automation and control systems Possesses previous experience working with Honeywell WEBS, LON, BACnet, Tridium, JCI Facility Explorer control systems Possess extensive knowledge and experience with programming, troubleshooting, and repairing building automation and control systems Possess analytical and problem-solving skills for resolution of engineering problems and understanding of technical data Ability to install Building Automation Systems from drawings, submittals and specifications Possess excellent communication and customer services skills Ability to work independently without direct supervision Knowledge of HVAC Mechanical equipment: Large Split systems, Chillers, Boilers, VAV's, Water Source Heat Pumps, CW/HW pumps and starters, etc. Maintains, inspects, and repairs pneumatic and electronic, electric DDC HVAC system controls. Performs troubleshooting tasks, including problem diagnosis, identification and isolation. Discusses system malfunctions with users to assist in isolation of problem. Determines appropriate action for problem resolution. Uses TAB techniques to perform diagnostic duties and make repairs to systems. Inspects systems to verify system compliance with plans and specifications and to detect malfunctions in system component parts. Studies building system design, as-built blueprints, HVAC systems diagrams, technical specifications and system configurations. Tests component and system performance to determine the need for adjustment or repair, develop methods to resolve performance problems in the most efficient and cost-effective manner. Programs, designs and modifies HVAC sub-systems of electronic building automation systems. Consults with engineers and contractors as necessary regarding system operation and configuration. Orders appropriate materials, components, and equipment necessary for efficient system operation. Performs other related work as required in support of general HVAC maintenance activity. Other Requirements: High School Diploma or GED Minimum 4 years of experience in the trade, which may include an apprenticeship and/or applicable vocational training, should include some experience in HVAC trade as a service or maintenance technician. Minimum 2 years automated system controls-related experience or equivalent formal training in automated systems controls operations Knowledge of the test and diagnostic equipment and instruments and hand and power tools used in this work Ability to read and analyze building blueprints and HVAC systems diagrams and specifications Tridium Niagara N4 certification a plus Punctual and regular attendance Ability to work on a team and interact with people Ability to communicate effectively with engineers, craftsmen, contractors, vendors and system users orally and in writing Valid driver's license and ability to meet company driver qualification policy Follow and adhere to all company safety requirements and processes Work flexible hours as needed

What you will do Under general supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. Mentors mechanical technicians on building automation activities. Properly completes required project and service documentation. How you will do it · Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. · Communicates with customer upon arrival and before leaving the work site. · Ensures high levels of customer satisfaction. · Meets regularly with customer to become familiar with operating problems. · Keeps customer informed on the nature of service provided, outstanding issues and recommends system enhancements, upgrades, and or replacement. · Promotes the sale of add-on work. · Manages assigned work to meet professional execution of time and customer satisfaction. · Reports problems or changes to management immediately. · Interfaces with branch manager, service manager, service project manager, or subcontractors on projects to coordinate activities as required in an ethical and professional manner. · Adheres to all Johnson Controls and customer safety standards. · Provides safety awareness on worksites · May provide training to customers on electronic control systems operations. · Delivers manuals and documentation to the customer for training needs as required. · Mentors and trains mechanical workforce on building automation systems. · Provides support to the mechanical staff on non-complex, non-critical equipment · Compiles job documentation, such as certificate of completion, customer training forms, training certificates and punch lists · Conducts extensive self-study (reading, research, and practice) to improve and maintain technical proficiency in company's product lines. · Completes certifications as required by the company. · Other duties related to the commissioning and servicing of building controls and facilities management systems as assigned. What we look for Required: · Vocational School four-year program or an Associate degree in electronics, mechanical systems, computer technology, air conditioning or similar field. · Three years of industry experience or five years of experience in servicing electronic and or mechanical systems in HVAC · Generally required knowledge includes HVAC controls systems, facilities management systems, site preparation, peripheral equipment installation and servicing techniques · Effective interpersonal skills to represent Johnson Controls to customers and other outside contacts in an ethical and professional manner · Ability to explain technical information to technical and non-technical people · Leadership skills to support the activities of mechanics working on non-complex, non-critical building automation equipment on a job site · PC experience required and the ability to program HVAC related software HIRING HOURLY RANGE: $21.63- $26.92(Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Now Offering a $2,500 Sign-On Bonus! APPLY TODAY! This position is responsible for maintaining electrical and mechanical systems on all automation equipment. (S)he will be responsible for troubleshooting electrical and mechanical problems and implementing corrective and preventative measures. Follow all required work safe practices. This would include compliance with Good Manufacturing Practices, wearing of all required PPE in designated areas, confined space safety, safe chemical handling, fall restraints, etc. Essential Duties: * Repair and maintain a variety of equipment and perform preventative maintenance on distribution center and/or manufacturing equipment * Use diagnostic equipment to troubleshoot, analyze and predict upcoming failures * Dismantle machines and equipment to gain access to problem areas * Operate metalworking machines such as bench lathes, milling machines, punch presses, and drive presses to fabricate housings, fittings, jogs and fixtures * Inspect and measure parts to detect wear, misalignment, or other problems * Remove and/or replace worn or defective parts * Other duties as assigned. Qualifications: * High School Diploma or GED Preferred * 2+ years of commercial or industrial maintenance experience or experience in a related field * Experience with low and high voltage electrical systems * Demonstrated understanding of operating principles of frequency drives, servos, electrical and PLCs * Demonstrated ability to troubleshoot PLCs, I/O and VFDs * Must be flexible and willing to work the demands of the department which may be subject to evenings, weekends and holidays. * Must be able to frequently reach up to 31-77 inches. Physical Demands: * Regularly lift and/or move up to 25 pounds * Frequently lift and/or move up to 50 pounds * Occasionally lift and/or move up to 100 pounds * Regularly stand; walk; stoop, kneel, crouch, climb, or crawl * Ability to reach and handle objects, tools, or controls Corporate Summary: At Shamrock Foods Company, people come first - our associates, our customers, and the families we serve across the nation. A privately-held, family-owned and -operated Forbes 500 company, Shamrock is an innovator in the food industry and has been since being founded in Arizona in 1922. Our Mission: At Shamrock Foods Company, we live by our founding family's motto to "treat associates like family and customers like friends." Why work for us? Benefits are a major part of your overall compensation, and we believe offering them at an affordable cost is not only the right thing to do, but it helps keep you and your family healthy. That's why Shamrock Foods pays for the majority of your health insurance, allowing you to take home more of your paycheck. And it doesn't stop there - our associates also enjoy additional benefits such as 401(k) Savings Plan, Profit Sharing, Paid Time Off, as well as our incredible growth opportunities, continued education and wellness programs. Equal Opportunity Employer At Shamrock Foods Co all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation, gender identity or any other basis protected by applicable law.

Cii Service is looking for an HVAC Building Controls Technician / Programmer to join our service team! We offer an entrepreneurial culture that promotes from within our organization and provide strong incentives for great performance. This position is primarily responsible for the installation, programming, commissioning, troubleshooting, repair and maintenance of building automation systems for HVAC and refrigeration equipment. This role ensures optimal system performance, energy efficiency, and occupant comfort by integrating hardware, software, and field devices into functional control solutions. Our current systems include Honeywell, ABB, Distech, and Carrier platforms. Key Responsibilities: Install, program, commission, and repair BAS controls including sensors, actuators, and user interfaces as well as associated HVAC equipment. Program and configure control logic, schedules, trends, and alarms in BAS platforms (Niagara 4, BACnet, or similar). Integrate new systems with existing HVAC, refrigeration, and lighting controls. Troubleshoot and repair BAS hardware, software, and network communication issues remotely and at customer's location. Configure and test controllers, sensors, actuators, and network components. Represent the company by serving as the direct customer contact and is responsible for servicing products and ensuring customer satisfaction. Read and interpret blueprints, schematics, and mechanical, electrical, and control drawings. Travel throughout company's geographic territory for site surveys, examination of building layout, on-site installation, preventive maintenance, repairs, replacement, and modifications as needed or requested by customers. Perform system diagnostics and optimize building performance through automation. Provide technical support and training to service technicians and customers on BAS functionalities. Maintain accurate documentation of service activities, backups and system configuration records. Ensure compliance with company and industry standards for safety and quality. Ability to mentor and train service technicians in all branches on BAS operation and maintenance. Train end users onsite on BAS operation and maintenance. Stay current with BAS technologies, control strategies, and energy efficiency practices. Assist with sales strategies to grow the controls business for all branches. Our Ideal Candidate Has: 2+ years of experience designing, installing, programming, and commissioning Commercial Building Automation Systems. Niagara 4 Certification and proven hands-on experience in BAS programming and commissioning. Familiarity with one or more of the following BAS: Honeywell, ABB, Distech, Johnson Controls, Schneider Electric, Siemens, Trane, or Daikin. Ability to diagnose and repair HVAC systems. Comfortable working in mechanical rooms, rooftops, and other field environments. This highly physical position requires the ability to lift 50 lbs and work on ladders, lifts, and in confined spaces. Tolerance for varying environmental conditions (hot, cold, dusty). A team player mentality and strong ability to solve problems. Familiarity with BACnet, LonWorks, and/or Modbus communication protocols. Knowledge of IT networking, IP addressing, and cybersecurity best practices for BAS. Excellent verbal and written communication skills. A valid driver's license and clean driving record. Why You'll Love Working Here: Competitive pay and benefits package. Company vehicle and tools for fieldwork. Health and Wellness: Comprehensive medical, dental, and vision plans to keep you and your family covered, including free preventive care and affordable prescription options. Life and Disability Insurance: Company-paid life insurance and disability coverage, with options to enhance your benefits. Retirement Savings: 401(k) plan with a generous company match to help secure your future, with immediate vesting. Paid Time Off: Enjoy paid holidays and a PTO plan that grows with your years of service. Opportunities for Career Advancement and Professional Development: We provide education assistance to help you grow your skills and career. Extra Perks: Flexible spending accounts, employee discounts, and 24/7 confidential support through our Employee Assistance Program. View all jobs at this company

Riddleberger Brothers, Inc. is seeking to hire a talented and growth-minded individual to join our team as a Commercial HVAC Controls Technician. We offer career opportunities that allow you to be part of a team and grow as an individual. We offer you: * Competitive pay * Comprehensive benefits package * Apprenticeship opportunities with a pathway to licensure * Growth and development opportunities * Scholarship program for our employees' children * Discounts at major automotive, computer, and cell phone companies * Employee referral incentives * Available with certain positions, where necessary/required: * Company mobile phone and/or tablet * Company vehicle * Company uniforms * And much more! Our benefits package offers you: * Medical, Dental, Vision, and Life Insurances * Short-Term and Long-Term Disability Insurances * Accidental Death & Dismemberment Insurance * Health Care and Dependent Day Care FSA's * Health Savings Account (HSA) * Employee Assistance Program (EAP) * 401(k) Plan with Roth IRA option * Pet Insurance * Annual Bonus * Generous Vacation, Holidays, and Sick Time * And much more! About us: We are a full-service plumbing, mechanical, HVAC service, controls, and design-build company. * Main office is located at 6127 South Valley Pike, Mount Crawford, VA 22841 * Parent Company - Comfort Systems USA (******************************* Primary purpose of this position: Perform installation, diagnosis, troubleshooting and repair of HVAC Building Automation and controls systems. Specific Job Duties: * Possess extensive knowledge and experience with programming, troubleshooting, and repairing building automation and control systems * Possesses previous experience working with Honeywell WEBS, LON, BACnet, Tridium, JCI Facility Explorer control systems * Possess extensive knowledge and experience with programming, troubleshooting, and repairing building automation and control systems * Possess analytical and problem-solving skills for resolution of engineering problems and understanding of technical data * Ability to install Building Automation Systems from drawings, submittals and specifications * Possess excellent communication and customer services skills * Ability to work independently without direct supervision * Knowledge of HVAC Mechanical equipment: Large Split systems, Chillers, Boilers, VAV's, Water Source Heat Pumps, CW/HW pumps and starters, etc. * Maintains, inspects, and repairs pneumatic and electronic, electric DDC HVAC system controls. * Performs troubleshooting tasks, including problem diagnosis, identification and isolation. Discusses system malfunctions with users to assist in isolation of problem. Determines appropriate action for problem resolution. * Uses TAB techniques to perform diagnostic duties and make repairs to systems. * Inspects systems to verify system compliance with plans and specifications and to detect malfunctions in system component parts. * Studies building system design, as-built blueprints, HVAC systems diagrams, technical specifications and system configurations. Tests component and system performance to determine the need for adjustment or repair, develop methods to resolve performance problems in the most efficient and cost-effective manner. * Programs, designs and modifies HVAC sub-systems of electronic building automation systems. * Consults with engineers and contractors as necessary regarding system operation and configuration. * Orders appropriate materials, components, and equipment necessary for efficient system operation. * Performs other related work as required in support of general HVAC maintenance activity. Other Requirements: * High School Diploma or GED * Minimum 4 years of experience in the trade, which may include an apprenticeship and/or applicable vocational training, should include some experience in HVAC trade as a service or maintenance technician. * Minimum 2 years automated system controls-related experience or equivalent formal training in automated systems controls operations * Knowledge of the test and diagnostic equipment and instruments and hand and power tools used in this work * Ability to read and analyze building blueprints and HVAC systems diagrams and specifications * Tridium Niagara N4 certification a plus * Punctual and regular attendance * Ability to work on a team and interact with people * Ability to communicate effectively with engineers, craftsmen, contractors, vendors and system users orally and in writing * Valid driver's license and ability to meet company driver qualification policy * Follow and adhere to all company safety requirements and processes * Work flexible hours as needed

Cii Service is looking for an HVAC Building Controls Technician / Programmer to join our service team! We offer an entrepreneurial culture that promotes from within our organization and provide strong incentives for great performance. This position is primarily responsible for the installation, programming, commissioning, troubleshooting, repair and maintenance of building automation systems for HVAC and refrigeration equipment. This role ensures optimal system performance, energy efficiency, and occupant comfort by integrating hardware, software, and field devices into functional control solutions. Our current systems include Honeywell, ABB, Distech, and Carrier platforms. Key Responsibilities: Install, program, commission, and repair BAS controls including sensors, actuators, and user interfaces as well as associated HVAC equipment. Program and configure control logic, schedules, trends, and alarms in BAS platforms (Niagara 4, BACnet, or similar). Integrate new systems with existing HVAC, refrigeration, and lighting controls. Troubleshoot and repair BAS hardware, software, and network communication issues remotely and at customer's location. Configure and test controllers, sensors, actuators, and network components. Represent the company by serving as the direct customer contact and is responsible for servicing products and ensuring customer satisfaction. Read and interpret blueprints, schematics, and mechanical, electrical, and control drawings. Travel throughout company's geographic territory for site surveys, examination of building layout, on-site installation, preventive maintenance, repairs, replacement, and modifications as needed or requested by customers. Perform system diagnostics and optimize building performance through automation. Provide technical support and training to service technicians and customers on BAS functionalities. Maintain accurate documentation of service activities, backups and system configuration records. Ensure compliance with company and industry standards for safety and quality. Ability to mentor and train service technicians in all branches on BAS operation and maintenance. Train end users onsite on BAS operation and maintenance. Stay current with BAS technologies, control strategies, and energy efficiency practices. Assist with sales strategies to grow the controls business for all branches. Our Ideal Candidate Has: 2+ years of experience designing, installing, programming, and commissioning Commercial Building Automation Systems. Niagara 4 Certification and proven hands-on experience in BAS programming and commissioning. Familiarity with one or more of the following BAS: Honeywell, ABB, Distech, Johnson Controls, Schneider Electric, Siemens, Trane, or Daikin. Ability to diagnose and repair HVAC systems. Comfortable working in mechanical rooms, rooftops, and other field environments. This highly physical position requires the ability to lift 50 lbs and work on ladders, lifts, and in confined spaces. Tolerance for varying environmental conditions (hot, cold, dusty). A team player mentality and strong ability to solve problems. Familiarity with BACnet, LonWorks, and/or Modbus communication protocols. Knowledge of IT networking, IP addressing, and cybersecurity best practices for BAS. Excellent verbal and written communication skills. A valid driver's license and clean driving record. Why You'll Love Working Here: Competitive pay and benefits package. Company vehicle and tools for fieldwork. Health and Wellness: Comprehensive medical, dental, and vision plans to keep you and your family covered, including free preventive care and affordable prescription options. Life and Disability Insurance: Company-paid life insurance and disability coverage, with options to enhance your benefits. Retirement Savings: 401(k) plan with a generous company match to help secure your future, with immediate vesting. Paid Time Off: Enjoy paid holidays and a PTO plan that grows with your years of service. Opportunities for Career Advancement and Professional Development: We provide education assistance to help you grow your skills and career. Extra Perks: Flexible spending accounts, employee discounts, and 24/7 confidential support through our Employee Assistance Program. View all jobs at this company

Now Offering a $2,500 Sign-On Bonus! APPLY TODAY! This position is responsible for maintaining electrical and mechanical systems on all automation equipment. (S)he will be responsible for troubleshooting electrical and mechanical problems and implementing corrective and preventative measures. Follow all required work safe practices. This would include compliance with Good Manufacturing Practices, wearing of all required PPE in designated areas, confined space safety, safe chemical handling, fall restraints, etc. Essential Duties: Repair and maintain a variety of equipment and perform preventative maintenance on distribution center and/or manufacturing equipment Use diagnostic equipment to troubleshoot, analyze and predict upcoming failures Dismantle machines and equipment to gain access to problem areas Operate metalworking machines such as bench lathes, milling machines, punch presses, and drive presses to fabricate housings, fittings, jogs and fixtures Inspect and measure parts to detect wear, misalignment, or other problems Remove and/or replace worn or defective parts Other duties as assigned. Qualifications: High School Diploma or GED Preferred 2+ years of commercial or industrial maintenance experience or experience in a related field Experience with low and high voltage electrical systems Demonstrated understanding of operating principles of frequency drives, servos, electrical and PLCs Demonstrated ability to troubleshoot PLCs, I/O and VFDs Must be flexible and willing to work the demands of the department which may be subject to evenings, weekends and holidays. Must be able to frequently reach up to 31-77 inches. Physical Demands: Regularly lift and/or move up to 25 pounds Frequently lift and/or move up to 50 pounds Occasionally lift and/or move up to 100 pounds Regularly stand; walk; stoop, kneel, crouch, climb, or crawl Ability to reach and handle objects, tools, or controls Corporate Summary: At Shamrock Foods Company, people come first - our associates, our customers, and the families we serve across the nation. A privately-held, family-owned and -operated Forbes 500 company, Shamrock is an innovator in the food industry and has been since being founded in Arizona in 1922. Our Mission: At Shamrock Foods Company, we live by our founding family's motto to “treat associates like family and customers like friends.” Why work for us? Benefits are a major part of your overall compensation, and we believe offering them at an affordable cost is not only the right thing to do, but it helps keep you and your family healthy. That's why Shamrock Foods pays for the majority of your health insurance, allowing you to take home more of your paycheck. And it doesn't stop there - our associates also enjoy additional benefits such as 401(k) Savings Plan, Profit Sharing, Paid Time Off, as well as our incredible growth opportunities, continued education and wellness programs. Equal Opportunity Employer At Shamrock Foods Co all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation, gender identity or any other basis protected by applicable law.

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. We're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations. Responsibilities * Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions * Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality * Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions * Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards * Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations * Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations * Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness * Provide technical support and training to field technicians and end-users as needed Qualifications * Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred * Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry * Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems * Familiarity with autonomous systems, marine navigation, and control systems is preferred * Strong analytical and problem-solving skills with attention to detail * Experience working with the DoD or government contracts is a plus Benefits * Medical Insurance: Comprehensive health insurance plans covering a range of services * Saronic pays 100% of the premium for employees and 80% for dependents * Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care * Saronic pays 99% of the premium for employees and 80% for dependents * Time Off: Generous PTO and Holidays * Parental Leave: Paid maternity and paternity leave to support new parents * Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses * Retirement Plan: 401(k) plan * Stock Options: Equity options to give employees a stake in the company's success * Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage * Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands * Ability to perform physically demanding work for extended periods of time, up to 12 hours/day * Frequently and repetitively, lift, push and carry up to 20 lbs. * The ability to carry 20 lbs. up and down stairs * Ability to work outside for an extended period of time * Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes * Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain * Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day * Climb and maintain balance on ladders, platforms, or other high structures * Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing * Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time * Exposures to hazardous materials and ability to follow waste handling/disposal procedures * Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require "U.S. Person" status. As defined by U.S. law, individuals who are any one of the following are considered to be a "U.S. Person": (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

**JOB FUNCTION:** Install, maintain, test, startup, and adjust a wide variety of electrical, electronic, electropneumatic, and electro-mechanical instrumentation and control systems/equipment. specific electrical and controls (E&C) systems include, but are not limited to, those associated with the electrical distribution system, turbine generators, chillers, boilers, incinerators, and HVAC equipment. **MAJOR DUTIES AND RESPONSIBILITIES:** + Read, interpret, and troubleshoot site E&C system deficiencies using electrical schematics, loop diagrams, control logics, mechanical drawings, and piping & instrument diagrams (P&IDs). Troubleshoot indiscriminately both the mechanical and electrical sides of systems. Maintain as-built logics, control loop diagrams, and documentation for all assigned systems. + Install, program, troubleshoot, calibrate, tune, preventive and predictive maintenance (condition monitoring), replace and repair all assigned E&C systems and all associated electrical, electronic, electropneumatic, and electro-mechanical components, including instrumentation and end-elements. + Troubleshoot hardware and software problems; perform simple programming, data base changes, and alarm log reviews; perform and maintain system back-ups and history database files; develop and install graphics to enhance operation and maintenance; and perform miscellaneous administrative functions as directed by E&C Engineer on site's microprocessor-based central control systems. + Program and troubleshoot ladder logic, both in hard-wired relays and PLC, for control systems. + Adjust control system parameters as required and/or directed by E&C Engineer. + Perform startup and checkout of newly installed E&C systems prior to operations turnover. + Complete ADC's as required. + Direct repair personnel as assigned. + Provide technical support as required to the E&C Engineer in the performance of his/her duties. + Perform all other duties as assigned. **REQUIRED QUALIFICATIONS** : + Journeyman Electrical License. + Working experience in electrical, industrial electronics, and electro-pneumatics. + Ability to read, interpret, and troubleshoot using electrical schematics, loop diagrams, control logics, mechanical drawings, and piping & instrument diagrams (P&ID's). + Five years working experience with 120VAC. + Working knowledge of PLC programming. Must be able to read, interpret, and troubleshoot ladder logic from computer terminal. + Knowledgeable in direct digital control (DDC) and other forms of electronic controls. + Hands-on experience in calibration and maintenance of electronic and / or electro-pneumatic control system equipment. + Hands-on experience in repair and troubleshooting of motor control centers and variable frequency drives (VFD's). + Ability to quickly learn operating and control systems for principal site-specific systems including, but not limited to, the electrical distribution system, turbine generators, chillers, boilers, incinerators, and + HVAC equipment. + Ability to comprehend written and oral instructions. + A willingness to work rotational shift if necessary, including days, evenings, and nights, as well as, overtime, on-call, call-ins, weekends, and holidays. **EXPERIENCE:** + Two years' experience in maintenance and repair on commercial/industrial/residential building equipment to include, but not limited to: cooling towers, pumps, heat exchangers. + Two years working experience with high voltage up to 15,000VAC, preferred. **EDUCATION** : High school, technical school, apprenticeship, trade school graduate or equivalent required. **PREFERRED QUALIFICATIONS:** + Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. + Understanding of Distributed Control Systems (DCS) and SCADA, preferred. + Understanding of HVAC building management systems (BMS), preferred. + NFPA-70E Training. + OSHA 10 Training. + CPR Training. + Certified and proficient in Foxboro computer systems to include hands-on and / or classroom experience, preferred. **SECURITY: M** ust be a U.S. Citizen, able to obtain and maintain a Top-Secret Security Clearance. **PHYSICAL DEMANDS:** Incumbents may work in conditions that require operating industrial machinery/power tools and motor vehicles. Additionally, incumbents may participate in work that requires walking, bending, squatting, and carrying materials throughout the facility. Workplace conditions necessitate following strict safety guidelines and the use of Personal Protective Equipment. Work tasks requiring the incumbent to lift weight more than 50 pounds requires two or more persons. The physical demands described here are representative of those that an employee may perform on an occasional to regular basis while performing functions of this job. The work environment characteristics describe here are representative of those an employee may encounter on an occasional to regular basis while performing the functions of this job. Reasonable accommodations may be made to enable individuals to perform these functions. The Government has full and complete control over granting, denying, withholding, or terminating security clearances for Contractor employees. Decisions on clearance requirements for positions will ultimately be decided by the customer based on access and requirements. It is the responsibility of the Contractor to ensure these decisions are approved and executed based on the customers guidance. **NOTE: T** he job description is not intended to be all-inclusive. Employees may be assigned other job-related Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations.Responsibilities Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness Provide technical support and training to field technicians and end-users as needed Qualifications Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems Familiarity with autonomous systems, marine navigation, and control systems is preferred Strong analytical and problem-solving skills with attention to detail Experience working with the DoD or government contracts is a plus Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands Ability to perform physically demanding work for extended periods of time, up to 12 hours/day Frequently and repetitively, lift, push and carry up to 20 lbs. The ability to carry 20 lbs. up and down stairs Ability to work outside for an extended period of time Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day Climb and maintain balance on ladders, platforms, or other high structures Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time Exposures to hazardous materials and ability to follow waste handling/disposal procedures Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3) . Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

HVAC Truck Based Senior Controls Technician What you will do Perform HVAC Control systems programming, troubleshooting, installation, commissioning and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components. Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment. Provide front line technical and repair support through effective communications with Johnson Controls customers. Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers. Be part of an expanding team of the best technicians in the industry while you build career with a first-class global organization. How you will do it Loading Johnson Controls field and network level controller software. Performing commissioning and system diagnostics for all levels of system controllers as well as end devices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation. Keeps management and JCI contractor or customer informed of job progress and issues. Calibrates systems requiring basic electronic test equipment. Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation. Documents changes and provides information for as-built documentation. Execute company sponsored as well as personally initiated training to insure the highest level of knowledge and capability are maintained Engage with customers to fully understand their systems and needs. Communicates with the JCI contractor or customer upon arrival and before leaving the work site. Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety. What we look for Required: Strong understanding of HVAC systems, sequence and applications Demonstrated technical aptitude in mechanical and electro-mechanical fields Able to use hand, power tools and electrical testing equipment such as a multi meter. Solid knowledge base in use of personal computers. Attention to detail. Good communication and listening skills. HIRING HOURLY RANGE: $24.52 - $30.29 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** #techhiring Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Riddleberger Brothers, Inc. is seeking to hire a talented and growth-minded individual to join our team as a Commercial HVAC Controls Technician. We offer career opportunities that allow you to be part of a team and grow as an individual. We offer you: Competitive pay Comprehensive benefits package Apprenticeship opportunities with a pathway to licensure Growth and development opportunities Scholarship program for our employees' children Discounts at major automotive, computer, and cell phone companies Employee referral incentives Available with certain positions, where necessary/required: Company mobile phone and/or tablet Company vehicle Company uniforms And much more! Our benefits package offers you: Medical, Dental, Vision, and Life Insurances Short-Term and Long-Term Disability Insurances Accidental Death & Dismemberment Insurance Health Care and Dependent Day Care FSA's Health Savings Account (HSA) Employee Assistance Program (EAP) 401(k) Plan with Roth IRA option Pet Insurance Annual Bonus Generous Vacation, Holidays, and Sick Time And much more! About us: We are a full-service plumbing, mechanical, HVAC service, controls, and design-build company. Main office is located at 6127 South Valley Pike, Mount Crawford, VA 22841 Parent Company - Comfort Systems USA (******************************* Primary purpose of this position: Perform installation, diagnosis, troubleshooting and repair of HVAC Building Automation and controls systems. Specific Job Duties: Possess extensive knowledge and experience with programming, troubleshooting, and repairing building automation and control systems Possesses previous experience working with Honeywell WEBS, LON, BACnet, Tridium, JCI Facility Explorer control systems Possess extensive knowledge and experience with programming, troubleshooting, and repairing building automation and control systems Possess analytical and problem-solving skills for resolution of engineering problems and understanding of technical data Ability to install Building Automation Systems from drawings, submittals and specifications Possess excellent communication and customer services skills Ability to work independently without direct supervision Knowledge of HVAC Mechanical equipment: Large Split systems, Chillers, Boilers, VAV's, Water Source Heat Pumps, CW/HW pumps and starters, etc. Maintains, inspects, and repairs pneumatic and electronic, electric DDC HVAC system controls. Performs troubleshooting tasks, including problem diagnosis, identification and isolation. Discusses system malfunctions with users to assist in isolation of problem. Determines appropriate action for problem resolution. Uses TAB techniques to perform diagnostic duties and make repairs to systems. Inspects systems to verify system compliance with plans and specifications and to detect malfunctions in system component parts. Studies building system design, as-built blueprints, HVAC systems diagrams, technical specifications and system configurations. Tests component and system performance to determine the need for adjustment or repair, develop methods to resolve performance problems in the most efficient and cost-effective manner. Programs, designs and modifies HVAC sub-systems of electronic building automation systems. Consults with engineers and contractors as necessary regarding system operation and configuration. Orders appropriate materials, components, and equipment necessary for efficient system operation. Performs other related work as required in support of general HVAC maintenance activity. Other Requirements: High School Diploma or GED Minimum 4 years of experience in the trade, which may include an apprenticeship and/or applicable vocational training, should include some experience in HVAC trade as a service or maintenance technician. Minimum 2 years automated system controls-related experience or equivalent formal training in automated systems controls operations Knowledge of the test and diagnostic equipment and instruments and hand and power tools used in this work Ability to read and analyze building blueprints and HVAC systems diagrams and specifications Tridium Niagara N4 certification a plus Punctual and regular attendance Ability to work on a team and interact with people Ability to communicate effectively with engineers, craftsmen, contractors, vendors and system users orally and in writing Valid driver's license and ability to meet company driver qualification policy Follow and adhere to all company safety requirements and processes Work flexible hours as needed

Riddleberger Brothers, Inc. is seeking to hire a talented and growth-minded individual to join our team as a Commercial HVAC Controls Technician. We offer career opportunities that allow you to be part of a team and grow as an individual. We offer you: * Competitive pay * Comprehensive benefits package * Apprenticeship opportunities with a pathway to licensure * Growth and development opportunities * Scholarship program for our employees' children * Discounts at major automotive, computer, and cell phone companies * Employee referral incentives * Available with certain positions, where necessary/required: * Company mobile phone and/or tablet * Company vehicle * Company uniforms * And much more! Our benefits package offers you: * Medical, Dental, Vision, and Life Insurances * Short-Term and Long-Term Disability Insurances * Accidental Death & Dismemberment Insurance * Health Care and Dependent Day Care FSA's * Health Savings Account (HSA) * Employee Assistance Program (EAP) * 401(k) Plan with Roth IRA option * Pet Insurance * Annual Bonus * Generous Vacation, Holidays, and Sick Time * And much more! About us: We are a full-service plumbing, mechanical, HVAC service, controls, and design-build company. * Main office is located at 6127 South Valley Pike, Mount Crawford, VA 22841 * Parent Company - Comfort Systems USA (******************************* Primary purpose of this position: Perform installation, diagnosis, troubleshooting and repair of HVAC Building Automation and controls systems. Specific Job Duties: * Possess extensive knowledge and experience with programming, troubleshooting, and repairing building automation and control systems * Possesses previous experience working with Honeywell WEBS, LON, BACnet, Tridium, JCI Facility Explorer control systems * Possess extensive knowledge and experience with programming, troubleshooting, and repairing building automation and control systems * Possess analytical and problem-solving skills for resolution of engineering problems and understanding of technical data * Ability to install Building Automation Systems from drawings, submittals and specifications * Possess excellent communication and customer services skills * Ability to work independently without direct supervision * Knowledge of HVAC Mechanical equipment: Large Split systems, Chillers, Boilers, VAV's, Water Source Heat Pumps, CW/HW pumps and starters, etc. * Maintains, inspects, and repairs pneumatic and electronic, electric DDC HVAC system controls. * Performs troubleshooting tasks, including problem diagnosis, identification and isolation. Discusses system malfunctions with users to assist in isolation of problem. Determines appropriate action for problem resolution. * Uses TAB techniques to perform diagnostic duties and make repairs to systems. * Inspects systems to verify system compliance with plans and specifications and to detect malfunctions in system component parts. * Studies building system design, as-built blueprints, HVAC systems diagrams, technical specifications and system configurations. Tests component and system performance to determine the need for adjustment or repair, develop methods to resolve performance problems in the most efficient and cost-effective manner. * Programs, designs and modifies HVAC sub-systems of electronic building automation systems. * Consults with engineers and contractors as necessary regarding system operation and configuration. * Orders appropriate materials, components, and equipment necessary for efficient system operation. * Performs other related work as required in support of general HVAC maintenance activity. Other Requirements: * High School Diploma or GED * Minimum 4 years of experience in the trade, which may include an apprenticeship and/or applicable vocational training, should include some experience in HVAC trade as a service or maintenance technician. * Minimum 2 years automated system controls-related experience or equivalent formal training in automated systems controls operations * Knowledge of the test and diagnostic equipment and instruments and hand and power tools used in this work * Ability to read and analyze building blueprints and HVAC systems diagrams and specifications * Tridium Niagara N4 certification a plus * Punctual and regular attendance * Ability to work on a team and interact with people * Ability to communicate effectively with engineers, craftsmen, contractors, vendors and system users orally and in writing * Valid driver's license and ability to meet company driver qualification policy * Follow and adhere to all company safety requirements and processes * Work flexible hours as needed

JOB FUNCTION: Install, maintain, test, startup, and adjust a wide variety of electrical, electronic, electropneumatic, and electro-mechanical instrumentation and control systems/equipment. specific electrical and controls (E&C) systems include, but are not limited to, those associated with the electrical distribution system, turbine generators, chillers, boilers, incinerators, and HVAC equipment. MAJOR DUTIES AND RESPONSIBILITIES: Read, interpret, and troubleshoot site E&C system deficiencies using electrical schematics, loop diagrams, control logics, mechanical drawings, and piping & instrument diagrams (P&IDs). Troubleshoot indiscriminately both the mechanical and electrical sides of systems. Maintain as-built logics, control loop diagrams, and documentation for all assigned systems. Install, program, troubleshoot, calibrate, tune, preventive and predictive maintenance (condition monitoring), replace and repair all assigned E&C systems and all associated electrical, electronic, electropneumatic, and electro-mechanical components, including instrumentation and end-elements. Troubleshoot hardware and software problems; perform simple programming, data base changes, and alarm log reviews; perform and maintain system back-ups and history database files; develop and install graphics to enhance operation and maintenance; and perform miscellaneous administrative functions as directed by E&C Engineer on site's microprocessor-based central control systems. Program and troubleshoot ladder logic, both in hard-wired relays and PLC, for control systems. Adjust control system parameters as and/or directed by E&C Engineer. Perform startup and checkout of newly installed E&C systems prior to operations turnover. Complete ADC's as . Direct repair personnel as assigned. Provide technical support as to the E&C Engineer in the performance of his/her duties. Perform all other duties as assigned. REQUIRED QUALIFICATIONS: Journeyman Electrical License. Working experience in electrical, industrial electronics, and electro-pneumatics. Ability to read, interpret, and troubleshoot using electrical schematics, loop diagrams, control logics, mechanical drawings, and piping & instrument diagrams (P&ID's). Five years working experience with 120VAC. Working knowledge of PLC programming. Must be able to read, interpret, and troubleshoot ladder logic from computer terminal. Knowledgeable in direct digital control (DDC) and other forms of electronic controls. Hands-on experience in calibration and maintenance of electronic and / or electro-pneumatic control system equipment. Hands-on experience in repair and troubleshooting of motor control centers and variable frequency drives (VFD's). Ability to quickly learn operating and control systems for principal site-specific systems including, but not limited to, the electrical distribution system, turbine generators, chillers, boilers, incinerators, and HVAC equipment. Ability to comprehend written and oral instructions. A willingness to work rotational shift if necessary, including days, evenings, and nights, as well as, overtime, on-call, call-ins, weekends, and holidays. EXPERIENCE: Two years' experience in maintenance and repair on commercial/industrial/residential building equipment to include, but not limited to: cooling towers, pumps, heat exchangers. Two years working experience with high voltage up to 15,000VAC, preferred. EDUCATION: High school, technical school, apprenticeship, trade school graduate or equivalent required. PREFERRED QUALIFICATIONS: Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Understanding of Distributed Control Systems (DCS) and SCADA, preferred. Understanding of HVAC building management systems (BMS), preferred. NFPA-70E Training. OSHA 10 Training. CPR Training. Certified and proficient in Foxboro computer systems to include hands-on and / or classroom experience, preferred. SECURITY: Must be a U.S. Citizen, able to obtain and maintain a Top-Secret Security Clearance. PHYSICAL DEMANDS: Incumbents may work in conditions that require operating industrial machinery/power tools and motor vehicles. Additionally, incumbents may participate in work that requires walking, bending, squatting, and carrying materials throughout the facility. Workplace conditions necessitate following strict safety guidelines and the use of Personal Protective Equipment. Work tasks requiring the incumbent to lift weight more than 50 pounds requires two or more persons. The physical demands described here are representative of those that an employee may perform on an occasional to regular basis while performing functions of this job. The work environment characteristics describe here are representative of those an employee may encounter on an occasional to regular basis while performing the functions of this job. Reasonable accommodations may be made to enable individuals to perform these functions. The Government has full and complete control over granting, denying, withholding, or terminating security clearances for Contractor employees. Decisions on clearance requirements for positions will ultimately be decided by the customer based on access and requirements. It is the responsibility of the Contractor to ensure these decisions are approved and executed based on the customers guidance. NOTE: The job description is not intended to be all-inclusive. Employees may be assigned other job-related Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.