Quality Control Technician jobs at Corvias

Job Title: Quality Lead Department: Quality Reports To: Regional FSQA Manager Wage Plan/Exemption: Non-Exempt The Quality Lead is responsible for activities, both direct and indirect, related to Quality Assurance/Control in the palatant production process. Furthermore, this position will be responsible for driving corporate quality standards at the local level, ensuring that leadership and support teams adhere to performance and customer expectations. Essential Duties / Responsibilities Manage all processing requirements as it pertains to food safety controls ie temperature, pH, sanitation, and/or process inspections. Ingredient inspections, process evaluation, product testing, and conformance compliance. Review of production documents to ensure accuracy and completeness Aseptically pull all micro-samples. Train, document, and support process, storage and tanker inspections as related to sanitation and process readiness. Complete daily QA Lead checklist. Update and distribute daily micro testing results. Responsible for verification activities, including thermometers, scales, and lab equipment (NIR, CEM, SafeTest Unit, Ash Ovens, pH meters, etc…). ERP maintenance: review, update, and communicate changes in process documentation to the local production team Overseeing and documenting training for FSQA compliance at the local level Assisting as after-hour backup for QA defined functions The primary function will be the local ownership of quality systems, with additional duties as assigned by management Ability to communicate effectively with other personnel Ability to read and understand department documents and procedures Ability to work as a member of a team Must follow all safety requirements Utilization of Basic computer systems including, but not limited to, Microsoft Office Education / Experience Understanding of basic math and science principles Ability to operate forklifts and other company equipment; training will be provided Problem-solving skills Basic mastery of ERP functions as it relates to Quality. Ability to read and comprehend written instructions Must have the ability to earn a PCQI, HACCP, or GMP certification Working Conditions Must be able to work in hot humid environment Must be able to work in cold freezer environment Must be able to stand, climb stairs, ladders, etc. up to 80% of time Must be able to lift and carry buckets with up to 55 lbs. liquid on an occasional basis, including lifting and pouring at shoulder level or above Overtime is available, limited, but not guaranteed. Position is considered on-call; requests and situations could occur outside of regular hours. CORE VALUES: It may be an understatement to say that we work every day to uphold our company's core values. Because being a servant leader, committed to relationships, pioneering, results driven and tenacious are not just ideals we work towards. We live them. We breathe them. These values are the true essence of how we work and are in every product, service, and opportunity we offer. Servant Leader to All - Humbly listening to and serving our employees, customer, and suppliers Committed to Relationships - Caring about the long-term well-being of our employees, customers, and suppliers Pioneering - Using our industry knowledge and entrepreneurial spirit to connect our stakeholders to innovative solutions Results-Driven - Having an intense desire to go beyond what is expected Tenacious - Persevering in all that we do Equal Opportunity Employer Protein for Pets OPCO, LLC is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, ethnicity, age, disability, marital status, veteran status, or any other characteristic protected by law.

ATCO Products: ATCO is a manufacturer and distributor of various automotive components. We have the best-in-class torque converters, transmissions, tools, equipment, additives, and sealants. ATCO is a one-stop shop for automotive shop supplies, parts, and accessories. ATCO is a dynamic global leader in transmission parts and driveline-related products. As a manufacturer and distributor of various automotive components, offering the broadest product range of quality OE and aftermarket parts, ATCO also deals with premium-remanufactured products: including automatic and standard transmission units, transmission rebuild kits and components, remanufactured torque converters, hard parts, valve bodies, differentials, and transfer case kits and components. Atco Products , a business unit of The Fidelis Holdings Group located in Ferris, Texas, is an IATF/ISO9001 Certified tubing/hose assembly manufacturer of high-quality automotive and heavy-duty truck components and assemblies. Both original equipment suppliers and aftermarket customers have relied on Atco Products to meet their OE production components and in/out of warranty service and parts requirements for more than 50 years. POSITION SUMMARY: As the quality technician, you will have the opportunity to support ATCO's continued growth by performing tests and inspections. This role follows ATCO's products throughout the various stages of the production process in order to compile and evaluate statistical data to determine the quality and reliability of our product. PRIMARY RESPONSIBILITIES : Maintains a safe work environment. Evaluates data and write reports to validate or indicate deviations from existing standards. Utilizes standard measurement tools such as micrometers, calipers, and other quality lab equipment to inspect the quality of ATCO's products. Notes and records performance data for evaluation. Calls attention to deviations or variations not anticipated or indicated in testing specifications and instructions of the customer sheet. Performs in-process audits and transfers materials as necessary. Works with operators on print interpretations and use of gauging. Performs other duties as assigned. QUALIFICATIONS : To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. EDUCATION/EXPERIENCE : 1 year of experience as a quality tech within an industrial manufacturing environment (Preferred). High school diploma or general education degree (GED) required. Must have experience abiding by IATF/ISO9001. KNOWLEDGE, SKILLS, & ABILITIES: Must be willing to work overtime when necessary Must be computer literate (basic computer skills) Must be able to stand or walk for long periods of time Bi-lingual (English/Spanish) is preferred, but not required SUPERVISORY RESPONSIBILITIES : None WORK ENVIRONMENT : The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to the risk of electrical shock. The employee is occasionally exposed to extreme heat. The noise level in the work environment is usually loud. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. PHYSICAL DEMANDS : The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly required to stand and talk or hear. The employee frequently is required to walk. The employee is occasionally required to use hands to finger, handle, or feel and reach with hands and arms. The employee must regularly lift and/or move up to 25 pounds, and frequently lift and/or move up to, but not limited to, 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and the ability to adjust focus. TRAVEL REQUIREMENTS: Up to 5% of the time. WHAT YOU WILL BRING: Strong self-starter Proficient personal computer and systems software skills to accomplish word processing, worksheets, and data input. A positive approach to work. A demonstrated ability to work well in a team environment, take initiative, and communicate effectively at all levels of the organization. Solid analytical and problem-solving skills. A fondness for talking with people and building relationships. Ability to make recommendations to resolve effectively any problems by using judgment that is consistent with standards, practices, policies, procedures, regulations, or government law. Strong interpersonal skills with the ability to work effectively with a wide variety of professionals, both internal and external. Strong attention to detail and quality. Excellent organizational and time management skills. Excellent communication skills.

Job Description ATCO Products: ATCO is a manufacturer and distributor of various automotive components. We have the best-in-class torque converters, transmissions, tools, equipment, additives, and sealants. ATCO is a one-stop shop for automotive shop supplies, parts, and accessories. ATCO is a dynamic global leader in transmission parts and driveline-related products. As a manufacturer and distributor of various automotive components, offering the broadest product range of quality OE and aftermarket parts, ATCO also deals with premium-remanufactured products: including automatic and standard transmission units, transmission rebuild kits and components, remanufactured torque converters, hard parts, valve bodies, differentials, and transfer case kits and components. Atco Products, a business unit of The Fidelis Holdings Group located in Ferris, Texas, is an IATF/ISO9001 Certified tubing/hose assembly manufacturer of high-quality automotive and heavy-duty truck components and assemblies. Both original equipment suppliers and aftermarket customers have relied on Atco Products to meet their OE production components and in/out of warranty service and parts requirements for more than 50 years. POSITION SUMMARY: As the quality technician, you will have the opportunity to support ATCO's continued growth by performing tests and inspections. This role follows ATCO's products throughout the various stages of the production process in order to compile and evaluate statistical data to determine the quality and reliability of our product. PRIMARY RESPONSIBILITIES: Maintains a safe work environment. Evaluates data and write reports to validate or indicate deviations from existing standards. Utilizes standard measurement tools such as micrometers, calipers, and other quality lab equipment to inspect the quality of ATCO's products. Notes and records performance data for evaluation. Calls attention to deviations or variations not anticipated or indicated in testing specifications and instructions of the customer sheet. Performs in-process audits and transfers materials as necessary. Works with operators on print interpretations and use of gauging. Performs other duties as assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. EDUCATION/EXPERIENCE: 1 year of experience as a quality tech within an industrial manufacturing environment (Preferred). High school diploma or general education degree (GED) required. Must have experience abiding by IATF/ISO9001. KNOWLEDGE, SKILLS, & ABILITIES: Must be willing to work overtime when necessary Must be computer literate (basic computer skills) Must be able to stand or walk for long periods of time Bi-lingual (English/Spanish) is preferred, but not required SUPERVISORY RESPONSIBILITIES: None WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to the risk of electrical shock. The employee is occasionally exposed to extreme heat. The noise level in the work environment is usually loud. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. PHYSICAL DEMANDS: The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly required to stand and talk or hear. The employee frequently is required to walk. The employee is occasionally required to use hands to finger, handle, or feel and reach with hands and arms. The employee must regularly lift and/or move up to 25 pounds, and frequently lift and/or move up to, but not limited to, 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and the ability to adjust focus. TRAVEL REQUIREMENTS: Up to 5% of the time. WHAT YOU WILL BRING: Strong self-starter Proficient personal computer and systems software skills to accomplish word processing, worksheets, and data input. A positive approach to work. A demonstrated ability to work well in a team environment, take initiative, and communicate effectively at all levels of the organization. Solid analytical and problem-solving skills. A fondness for talking with people and building relationships. Ability to make recommendations to resolve effectively any problems by using judgment that is consistent with standards, practices, policies, procedures, regulations, or government law. Strong interpersonal skills with the ability to work effectively with a wide variety of professionals, both internal and external. Strong attention to detail and quality. Excellent organizational and time management skills. Excellent communication skills.

ATCO Products: ATCO is a manufacturer and distributor of various automotive components. We have the best-in-class torque converters, transmissions, tools, equipment, additives, and sealants. ATCO is a one-stop shop for automotive shop supplies, parts, and accessories. ATCO is a dynamic global leader in transmission parts and driveline-related products. As a manufacturer and distributor of various automotive components, offering the broadest product range of quality OE and aftermarket parts, ATCO also deals with premium-remanufactured products: including automatic and standard transmission units, transmission rebuild kits and components, remanufactured torque converters, hard parts, valve bodies, differentials, and transfer case kits and components. Atco Products, a business unit of The Fidelis Holdings Group located in Ferris, Texas, is an IATF/ISO9001 Certified tubing/hose assembly manufacturer of high-quality automotive and heavy-duty truck components and assemblies. Both original equipment suppliers and aftermarket customers have relied on Atco Products to meet their OE production components and in/out of warranty service and parts requirements for more than 50 years. POSITION SUMMARY: As the quality technician, you will have the opportunity to support ATCO's continued growth by performing tests and inspections. This role follows ATCO's products throughout the various stages of the production process in order to compile and evaluate statistical data to determine the quality and reliability of our product. PRIMARY RESPONSIBILITIES: Maintains a safe work environment. Evaluates data and write reports to validate or indicate deviations from existing standards. Utilizes standard measurement tools such as micrometers, calipers, and other quality lab equipment to inspect the quality of ATCO's products. Notes and records performance data for evaluation. Calls attention to deviations or variations not anticipated or indicated in testing specifications and instructions of the customer sheet. Performs in-process audits and transfers materials as necessary. Works with operators on print interpretations and use of gauging. Performs other duties as assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. EDUCATION/EXPERIENCE: 1 year of experience as a quality tech within an industrial manufacturing environment (Preferred). High school diploma or general education degree (GED) required. Must have experience abiding by IATF/ISO9001. KNOWLEDGE, SKILLS, & ABILITIES: Must be willing to work overtime when necessary Must be computer literate (basic computer skills) Must be able to stand or walk for long periods of time Bi-lingual (English/Spanish) is preferred, but not required SUPERVISORY RESPONSIBILITIES: None WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to the risk of electrical shock. The employee is occasionally exposed to extreme heat. The noise level in the work environment is usually loud. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. PHYSICAL DEMANDS: The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly required to stand and talk or hear. The employee frequently is required to walk. The employee is occasionally required to use hands to finger, handle, or feel and reach with hands and arms. The employee must regularly lift and/or move up to 25 pounds, and frequently lift and/or move up to, but not limited to, 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and the ability to adjust focus. TRAVEL REQUIREMENTS: Up to 5% of the time. WHAT YOU WILL BRING: Strong self-starter Proficient personal computer and systems software skills to accomplish word processing, worksheets, and data input. A positive approach to work. A demonstrated ability to work well in a team environment, take initiative, and communicate effectively at all levels of the organization. Solid analytical and problem-solving skills. A fondness for talking with people and building relationships. Ability to make recommendations to resolve effectively any problems by using judgment that is consistent with standards, practices, policies, procedures, regulations, or government law. Strong interpersonal skills with the ability to work effectively with a wide variety of professionals, both internal and external. Strong attention to detail and quality. Excellent organizational and time management skills. Excellent communication skills.

Benefits: 401(k) 401(k) matching Job Title: Quality Assurance Technician/ Eng with FAI (Aerospace Industry) Must have: Candidate to create and review First Article Inspection (FAI) Pre-Plan Aerospace exp, Manufacturing or Production experience Job Description: 1. Aerospace/Automotive/ Medical background 2. FAIR/Pre-planning Experience 3. Interpret blueprints, specifications & work instructions. 4. Manufacturing Experience (an added advantage) 5. RCA/Problem Solving/Risk Mitigation 6. Min experience: 1+ years Main Responsibilities: • Preplan AS9102 compliant FAI's utilizing planning document, 2D/3D engineering drawings. • Develop AS9102 Forms #1,2 and 3 (Customize if required to meet customer requirement. • Create a Ballooned” drawing which links engineering features to the appropriate entry on the FAI form. • Add instructions/remarks for inspection. • Prepare and maintain applicable FAI Metrics. • Standardize FAI Plans based on Part families. • Automate the process to reduce the errors in planning. • Perform FAI Reviews in Net-inspect Compensation: $50,000.00 - $55,000.00 per year MAKING THE INDUSTRY'S BEST MATCHES DBSI Services is widely recognized as one of the industry's fastest growing staffing agencies. Thanks to our longstanding experience in various industries, we have the capacity to build meaningful, long-lasting relationships with all our clients. Our success is a result of our commitment to the best people, the best solutions and the best results. Our Story: Founded in 1995 Privately Owned Corporation Managing Partner Business Model Headquartered in New Jersey US Based Engineers Only Collaborative Team Approach Methodology and Process Driven GET HIRED Top performing engineers are the foundation of our business. Our priority is building strong relationships with each employment candidate we work with. You can trust our professional recruiters to invest the time required to fully understand your skills, explore your professional goals and help you find the right career opportunities.

Broadwind Heavy Fabrications is searching for an experienced Quality Assurance Ultrasonic Testing Technician II (UT) to join our team in Abilene, TX. The opening we have is on our Night Shift, which is 6 pm to 6 am Monday through Thursday. This shift comes with a $2/hr shift differential. This role ensures product meets Broadwind and customer requirements or specifications throughout the production process by inspecting the quality of welded joints in metallic materials RESPONSIBILITIES AND ESSENTIAL FUNCTIONS (May include some or all of the following responsibilities) * Set up and calibrate UT equipment, accurately documenting /recording results * Inspect product to customer specification, which includes accurately detecting discontinuities and recording inspection results o Verify product meets customer specification o Responsible for all aspects of NDT related records o Maintains confidentiality of records and information * Maintains inspection of tools and equipment * Communicate major non-conformances effectively * Interpret and analyze information, provide technical advice * Document and record experience hours * Input data into computerized information systems used in quality applications * Train and supervise Ultrasonic Technician level I's (audit inspections, oversee calibration of equipment and weld inspections) * Actively support all EHS and continuous improvement initiatives * Assist with other projects as needed or assigned QUALIFICATIONS * High school diploma/GED * Associate's degree in quality, inspection or related field is desired * Completion of a 40 hour accredited Ultrasound Inspection Level I and 40 Level II course * On the job training experience equivalent to 1200 hours; must be directly related to the duties and responsibilities specified in SNT-TC-1A * Experience in a field or prior role that offers a well-rounded manufacturing and/or quality background * Additional education in quality related courses and problem solving techniques (i.e. Statistical Process Control, good manufacturing practices and Statistical Quality Control) * Must pass a new hire drug test and periodic randoms Specialized Skills/Knowledge/Ability * Understanding of customer specifications concerning VT requirements, UT requirements, AWS, EN, SNT-TC-1A, and ISO 5817 * Comfortable reading and interpreting blue prints * Has an understanding of lean manufacturing practices and cost-effectiveness * Proficient at organizing resources and establishing priorities * Understand computerized information systems used in quality applications * Able to utilize EPOCH XT/LT, GE Phasor, and TOFD * Ability to efficiently and independently use ruler/steel rule, weld toe gauge, bridge-cam, PWOG, and flashlight. Able to explain concepts and teach others to do essential functions of UT level I. * Complete and gain certification by attending class for Ultrasonic Technician level I and Ultrasonic Technician level II. Pass general, practical, specific test and record hours of inspection. Pass vision acuity test and become a certified UT II by a UT III.

InDyne is a full-service military, civilian and commercial operations company. Our Mission is to provide tailored cost effective, quality services and solutions. Our Vision is to exceed customer expectations by delivering results through agility, flexibility and responsiveness. Our Core Values include integrity, trust and loyalty. Responsibilities Performs technical functions with minimal supervision- Prepares reports, charts and graphs for other personnel to review and present. Performs standardization or prescribed assignments involving a sequence of related operations, follows standard work methods on recurring assignments but receives explicit instructions on unfamiliar assignments. Following minimal instructions, conduct a variety of tests using established methods, preparing test specimens, adjusting and operating equipment, recording test data, and pointing out deviations resulting from equipment malfunction or observational errors. Qualifications High school diploma or equivalnet and 4 years experience, or any equivalent combination of relevant education and experience. Physical demands- Generally an outside work environment, but can involv inside work in an office depending on the task. Outside work will include various environmental conditions including hot and cold climates, working in the elements. Must be able to carry a pack weighing approximately 20-50 lbs. Must be able to walk comfortably for several miles, potentially carrying previously mentioned pack. Work site will be Fort Hood, TX but may require extended temporary duty to other sites in continental USA. Ability to operate office equipment, such as a personal computer, phone systems, printers, etc. Must demonstrate professional behavior at all time when dealing with management, customers and co-workers. Must have clear, concise and accurate communication skills in English, both verbal and written. Independent transportation to office or work site is required. Ability to pass a drug screen

InDyne is a full-service military, civilian and commercial operations company. Our Mission is to provide tailored cost effective, quality services and solutions. Our Vision is to exceed customer expectations by delivering results through agility, flexibility and responsiveness. Our Core Values include integrity, trust and loyalty. Responsibilities Performs technical functions with minimal supervision- Prepares reports, charts and graphs for other personnel to review and present. Performs standardization or prescribed assignments involving a sequence of related operations, follows standard work methods on recurring assignments but receives explicit instructions on unfamiliar assignments. Following minimal instructions, conduct a variety of tests using established methods, preparing test specimens, adjusting and operating equipment, recording test data, and pointing out deviations resulting from equipment malfunction or observational errors. Qualifications High school diploma or equivalnet and 2 years experience, or any equivalent combination of relevant education and experience. Physical demands- Generally an outside work environment, but can involv inside work in an office depending on the task. Outside work will include various environmental conditions including hot and cold climates, working in the elements. Must be able to carry a pack weighing approximately 20-50 lbs. Must be able to walk comfortably for several miles, potentially carrying previously mentioned pack. Work site will be Fort Hood, TX but may require extended temporary duty to other sites in continental USA. Ability to operate office equipment, such as a personal computer, phone systems, printers, etc. Must demonstrate professional behavior at all time when dealing with management, customers and co-workers. Must have clear, concise and accurate communication skills in English, both verbal and written. Independent transportation to office or work site is required. Ability to pass a drug screen

InDyne is a full-service military, civilian and commercial operations company. Our Mission is to provide tailored cost effective, quality services and solutions. Our Vision is to exceed customer expectations by delivering results through agility, flexibility and responsiveness. Our Core Values include integrity, trust and loyalty. Responsibilities Performs technical functions with minimal supervision- Prepares reports, charts and graphs for other personnel to review and present. Performs standardization or prescribed assignments involving a sequence of related operations, follows standard work methods on recurring assignments but receives explicit instructions on unfamiliar assignments. Following minimal instructions, conduct a variety of tests using established methods, preparing test specimens, adjusting and operating equipment, recording test data, and pointing out deviations resulting from equipment malfunction or observational errors. Qualifications High school diploma or equivalnet and 6 years experience, or any equivalent combination of relevant education and experience. Physical demands- Generally an outside work environment, but can involv inside work in an office depending on the task. Outside work will include various environmental conditions including hot and cold climates, working in the elements. Must be able to carry a pack weighing approximately 20-50 lbs. Must be able to walk comfortably for several miles, potentially carrying previously mentioned pack. Work site will be Fort Hood, TX but may require extended temporary duty to other sites in continental USA. Ability to operate office equipment, such as a personal computer, phone systems, printers, etc. Must demonstrate professional behavior at all time when dealing with management, customers and co-workers. Must have clear, concise and accurate communication skills in English, both verbal and written. Independent transportation to office or work site is required. Ability to pass a drug screen

We have an exciting opportunity at our Carrollton, Texas facility for a QC Chemist. This position serves as a Quality Control Chemist and maintains quality standards by performing analytical testing on incoming and finished products for composition and impurities, as well as recording quality results. In addition, this role will accommodate preparations for new formulations (Gauge studies, method development, instrument installation, etc). Company Overview FUJIFILM Electronic Materials, U.S.A. fuels innovation in the semiconductor industry-where chemistry meets technology. Our advanced materials and formulations enable manufacturers to build the microchips that power Artificial Intelligence, computers, electric vehicles, smartphones, and more. We're a global business-to-business supplier of chemical formulations and advanced materials used for manufacturing and packaging semiconductors. Our chemical formulations allow top manufacturers to produce microchips that both power and connect our digital world. Think you've got what it takes to build a more connected world? Then connect with us today and challenge the boundaries of what's possible-for the world and your future. We have six U.S. manufacturing and Research & Development facilities, located in: Mesa, Arizona; Castroville, California; Hollister, California; Carrollton, Texas; and North Kingstown, Rhode Island-each offering unique local experiences, from vibrant cultural scenes to historic charm. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of “giving our world more smiles.” Visit: *************************************************** Job Description Key responsibilities for this role include: Responsible for testing and approving raw materials, intermediates, and final products following company processes and procedures via use of lab equipment (eg: GC, Karl Fischer titration, ICP-MS, NVR). Complete and issue Certificates of Analysis (COA). Investigate out of specification and out of control results. Review process control charts and take action as required. Develop, review, and update laboratory documents and procedures. Respond to deviations by assessing the impact on product safety and quality. Instrument validation, troubleshooting, repair, and maintenance. Laboratory upkeep and cleaning, waste disposal, and gas maintenance. Maintain safe and healthy work environment by following standards and procedures. Comply with legal regulations REQUIREMENTS Requires a Master's degree or BA/BS Chemistry degree and minimum of 1-2 years of experience in the semiconductor or related field or in a production laboratory environment. Instrumentation and analytical skills experience preferred - wet chemistry techniques, UV-Vis, GC/FID/TCD, IC, HPLC, GFAA, ICP/OES, ICP/MS, FTIR, GC/MS, and liquid particle counters. Additional mass spectroscopy experience a plus. Ability to multi-task and handle change in priorities. Strong organization skills, good attention to detail, and the ability to function effectively as part of a cross functional team. Strong verbal and written communication skills. Must have excellent computer skills (Word, PowerPoint, Excel and statistical software tools). Strong troubleshooting skills Must be able to work 2nd shift. 12:00PM - 9:00PM / Monday thru Friday ADDITIONAL REQUIREMENTS We value a professional, adaptable, and collaborative work environment. The following competencies are essential for success in any role and reflect our commitment to effective teamwork, problem solving, and workplace communication. Resilience - Ability to adapt to workplace challenges, maintain professionalism, and manage responsibilities effectively. Communication - Capacity to clearly and professionally exchange ideas, interact respectfully with colleagues and customers, and foster positive workplace relationships. Reasoning & Decision Making - Ability to analyze information, follow verbal and written instructions, and make logical, sound decisions. Comprehension - Capability to understand and complete tasks as assigned and solve problems effectively. Organizational Skills - Competence in managing multiple priorities, maintaining accuracy, and staying focused despite potential workplace distractions. To all agencies: Please, no phone calls or emails to any employee of Fujifilm about this requisition. All resumes submitted by search firms/employment agencies to any employee at Fujifilm via-email, the internet or in any form and/or method will be deemed the sole property of Fujifilm, unless such search firms/employment agencies were engaged by Fujifilm for this requisition and a valid agreement with Fujifilm is in place. In the event a candidate who was submitted outside of the Fujifilm agency engagement process is hired, no fee or payment of any kind will be paid. EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (********************************).

The Sr. Analyst 1, QC Analytical Development (QCAD) Bioassay supports the implementation of plate and cell-based analytical methods for Technology Transfer (TT) of drug substance (DS) and drug product (DP) into the Quality Control laboratories of FUJIFILM Biotechnologies Diosynth Holly Springs (FDBN). This role supports the transfer and validation of methods such as residuals (HCP, DNA, Protein A), dot blot for product identity, ELISA ID/ Potency and various cell-based assays. The Sr. Analyst 1, QC AD Bioassay ensures Good Manufacturing Practices (GMP) compliant laboratory operations in accordance with regulatory guidelines. This role executes analytical method transfers from clients and author and review procedures, SOPs, and technical reports. Job Description What You'll Do • Executes analytical method transfers and validations for plate and cell-based Bioassays for the QC Analytical Development team • Ensures compliance of analytical testing with appropriate GMP regulations • Participates in regular meetings for TT programs with cross-functional teams and key stakeholders • Authors and reviews SOPs, protocols, and technical reports • Works cross-functionally with Contract Laboratory Organizations (CLOs), QC testing teams, Quality Assurance (QA), and Process Science groups to ensure transfer of methods according to deadlines • Collaborates with the LIMS team and IT department to build new analytical method functionality that meets end-user and customer requirements • Ensures compendial method oversight and scientific guidelines (e.g. ICH, EMA, FDA, etc.) • Supports regulatory requests and inspections • Supports the QCAD team to investigate any project challenges with necessary risk assessment tools and techniques, as needed • Supports best practices for TT and PPQ strategies globally, as required • Coordinates and supports QCAD Bioassay lab activities and provide training for QC Bioassay lab technicians • Performs other duties, as assigned Minimum Requirements: • B.S. in Microbiology, Virology, Biology, Biological Sciences, Engineering, or related science field with 2+ years of analytical laboratory experience preferably in biotechnology, Pharma, Contract Research Organization (CRO), or Contract Laboratory Organization (CLO) OR • M.S. in Virology, Microbiology, Biology, or related science field with Microbiology, Virology, Biology, Biological Sciences, Engineering, or related science field with 0+ years of previous experience • 1+ years' experience in a GMP environment • Experience with QC Bioassay testing methods including protein binding assays (e.g. ELISA, Dot Blot, etc.), and • Experience with analytical method development, tech transfers and validation residual testing for DNA, Host Cell Protein (HCP), Protein A Preferred Requirements: • Master's in Virology, Microbiology, Biology or related science field with 1+ years of related experience • Experience with LIMS software Physical and Work Environment Requirements: Ability to discern audible cues. Ability to inspect or perform a task with 20/20 corrected vision, visual acuity, including distinguishing color. Ability to ascend or descend ladders, scaffolding, ramps, etc. Ability to stand for prolonged periods of time up to 60 minutes. Ability to sit for prolonged periods of time up to 60 minutes. Ability to conduct activities using repetitive motions that include writs, hands and/or fingers. Ability to conduct work that includes moving objects up to 10 pounds. Ability to bend, push or pull, reach to retrieve materials from 18” to 60” in height, and use twisting motions. Will work in small and/or enclosed spaces. Will work in heights greater than 4 feet. To all agencies: Please, no phone calls or emails to any employee of FUJIFILM about this requisition. All resumes submitted by search firms/employment agencies to any employee at FUJIFILM via-email, the internet or in any form and/or method will be deemed the sole property of FUJIFILM, unless such search firms/employment agencies were engaged by FUJIFILM for this requisition and a valid agreement with FUJIFILM is in place. In the event a candidate who was submitted outside of the FUJIFILM agency engagement process is hired, no fee or payment of any kind will be paid.

Job Description As a Process & Technical Support representative, you will provide technical support through your knowledge of First Texas Homes' procedures and products we currently utilize and will implement in the future. You will focus on supporting our end users from all departments in these products and helping them find a resolution while providing exceptional customer service. Job responsibilities Learning the various technologies already implemented including, but not limited to Brix ERP, Brix Sales, BuildPro, Adobe, OneDrive, SharePoint, Docusign, etc. Manage the help desk requests for the technology mentioned above Docusign review Update/create document learned processes Any other duties that further Technical and Business Development needs of the First Texas Family Homes' family of companies Job requirements We will intensively train the correct fit for this position, but you must possess the ability to learn programs and processes quickly Excellent verbal and written communication skills needed for our documentation process and daily interactions with our internal customers Highly organized Able to conduct research and analyses of technology Analytical Strategic thinker Problem-solving Attention to details Able to multitask, prioritize, and manage time efficiently Able to build strong interpersonal relationships with peers and other senior management throughout the company Able to align multiple strategies and ideas Confident in producing and presenting work Strict adherence to company philosophy/mission statement/goals Proficient computer skills, Microsoft Office Suite (Word, PowerPoint, Outlook, and Excel) Rotating weekend shifts

The Production Technician 3 executes manufacturing processing steps and associated activities while maintaining strict adherence to Current Good Manufacturing Practice (CGMP), quality and regulatory standards. Flexibility with working hours and shift rotation is essential to effectively support the 24/7 manufacturing facility. Company Overview At FUJIFILM Biotechnologies, we're leading the charge in advancing tomorrow's medicines. If you want to be a part of life-impacting projects alongside today's most innovative biopharmaceutical companies, FUJIFILM Biotechnologies could be the right place for you. From our Bioprocess Innovation Center to our cGMP-compliant manufacturing site, we thrive on collaboration, creativity, and purpose. Whether your expertise lies in research, manufacturing, or production, you'll find a home here where your efforts directly improve patients' lives. Together, let's shape the future of healthcare. Situated at the cross-section of Morrisville and Research Triangle Park (RTP), North Carolina, our site is at the heart of a booming biotech hub surrounded by top universities, vibrant communities, and various outdoor opportunities. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of “giving our world more smiles.” Visit: *************************************************** Job Description What You'll Do Executes and documents manufacturing processing steps or support activities, process monitoring, and control within at least one functional area in manufacturing (e.g., Fermentation, Purification, Recovery, Cell Culture) and all support functions (e.g., Glasswash, Buffer/Solution Prep) Performs in-process sampling and testing (e.g., pH, conductivity, visual inspection) Executes validation protocols according to CGMP standard operating procedures (SOPs) Maintains training to perform all required activities Performs manufacturing task execution using all applicable areas of Distributed Control Systems (DCS) (Delta V, 800xA, Unicorn, etc.) Conducts take-outs, identity check returns and other tasks in Manufacturing Execution System (MES) Performs clean-in-place (CIP), steam-in-place (SIP) and other equipment cleanings Performs other duties, as assigned Minimum Requirements: High School Diploma/GED with 4+ years of experience in a CGMP manufacturing environment; or Associate degree in life science, engineering, or relevant technical field with 2+ years of experience in a CGMP manufacturing environment; or Bachelor's degree in life science, engineering, or relevant technical field with no prior experience; or Equivalent Military training or experience Preferred Requirements: Experience with unit operation (e.g., Cell Culture, Fermentation, etc.) Working Conditions & Physical Requirements: Ability to discern audible cues Will work in environment which may necessitate respiratory protection. Ability to inspect or perform a task with 20/20 corrected vision, visual acuity, including distinguishing color. Ability to stand for prolonged periods of time, up to 240 minutes Ability to sit for prolonged periods of time, up to 240 minutes Ability to conduct activities using repetitive motions that include writs, hands and/or fingers Ability to conduct work that includes moving objects up to 33 pounds Ability to bend, push or pull, reach to retrieve materials from 18” to 60” in height, and use twisting motions. Will work in warm/cold environments. (0-100 F) Our programs are designed to focus on maintaining and enhancing all pillars of health with a robust benefits package including medical, dental, vision and prescription drug coverage with the option of a Health Savings Account with company contributions. In addition, we offer an industry leading 401(k) savings plan, insurance coverage, employee assistance programs and various wellness incentives. We support life-work balance with paid vacation time, sick time, and company holidays. Explore a supportive environment that enriches both your personal and professional growth! To all agencies: Please, no phone calls or emails to any employee of FUJIFILM about this requisition. All resumes submitted by search firms/employment agencies to any employee at FUJIFILM via-email, the internet or in any form and/or method will be deemed the sole property of FUJIFILM, unless such search firms/employment agencies were engaged by FUJIFILM for this requisition and a valid agreement with FUJIFILM is in place. In the event a candidate who was submitted outside of the FUJIFILM agency engagement process is hired, no fee or payment of any kind will be paid. EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (HR_*****************).

The Production Technician 3 executes manufacturing processing steps and associated activities while maintaining strict adherence to Current Good Manufacturing Practice (CGMP) quality and regulatory standards. Flexibility with working hours and shift rotation is essential to effectively support the 24/7 manufacturing facility. Company Overview At FUJIFILM Biotechnologies, we're leading the charge in advancing tomorrow's medicines. If you want to be a part of life-impacting projects alongside today's most innovative biopharmaceutical companies, FUJIFILM Biotechnologies could be the right place for you. From our Bioprocess Innovation Center to our cGMP-compliant manufacturing site, we thrive on collaboration, creativity, and purpose. Whether your expertise lies in research, manufacturing, or production, you'll find a home here where your efforts directly improve patients' lives. Together, let's shape the future of healthcare. Situated at the cross-section of Morrisville and Research Triangle Park (RTP), North Carolina, our site is at the heart of a booming biotech hub surrounded by top universities, vibrant communities, and various outdoor opportunities. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of “giving our world more smiles.” Visit: *************************************************** Job Description Major Accountabilities: Executes and documents manufacturing processing steps or support activities, process monitoring and control within at least one functional area in manufacturing (e.g., Fermentation, Purification, Recovery, Cell Culture) and all support functions (e.g., Glasswash, Buffer/Solution Prep) Performs in-process testing (e.g., pH, conductivity, visual inspection) Executes validation protocols according to Current Good Manufacturing Practice (CGMP) standard operating procedures (SOPs) Maintains training to perform all required activities Performs manufacturing task execution using all area applicable areas of Distributed Control System (DCS), (DeltaV, 800xA, Unicorn, etc.) Conducts takeouts, identity check returns and other tasks in the Manufacturing Execution System (MES) Performs clean-in-place (CIP), steam-in-place (SIP), and other equipment cleanings Performs other duties, as assigned Knowledge, Skills or Abilities: Effective communication, both written and verbal Knowledge of CGMP and safety regulations Ability to work in a team environment Time management skills and detail-oriented Ability to initiate a deviation and initiate a work order within the Computerized Maintenance Management System (CMMS) Must be able to support 24/7 manufacturing facility working shift (2-2-3 day/night) Minimum Education and Experience: High School Diploma/GED with 4+ years of experience in a CGMP manufacturing environment; or Associate degree in life science, engineering, or relevant technical field with 2+ years of experience in a CGMP manufacturing environment; or Bachelor's degree in life science, engineering, or relevant technical field with no prior experience; or Equivalent Military training or experience Experience with unit operation (e.g., Cell Culture, Fermentation, etc.) Preferred Education & Certification Requirements: Experience with unit operation (e.g., Cell Culture, Seed Train, etc.) BioWork certificate Physical Demands: Will work in environment which may necessitate respiratory protection. Ability to discern audible cues. Ability to inspect or perform a task with 20/20 corrected vision, visual acuity, including distinguishing color. Ability to ascend or descend ladders, scaffolding, ramps, etc. Ability to stand for prolonged periods of time up to 240 minutes. Ability to sit for prolonged periods of time up to 240 minutes. Ability to conduct activities using repetitive motions that include wrists, hands and/or fingers. Ability to conduct work that includes moving objects up to 33 pounds. Ability to bend, push or pull, reach to retrieve materials from 18” to 60” in height, and use twisting motions. Will work in warm/cold environments (0-100F) To all agencies: Please, no phone calls or emails to any employee of FUJIFILM about this requisition. All resumes submitted by search firms/employment agencies to any employee at FUJIFILM via-email, the internet or in any form and/or method will be deemed the sole property of FUJIFILM, unless such search firms/employment agencies were engaged by FUJIFILM for this requisition and a valid agreement with FUJIFILM is in place. In the event a candidate who was submitted outside of the FUJIFILM agency engagement process is hired, no fee or payment of any kind will be paid. *#LI-Onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (HR_*****************).

The Production Technician 4 leads and executes manufacturing processing steps and associated activities while maintaining strict adherence to Current Good Manufacturing Practice (CGMP), quality and regulatory standards. Flexibility with working hours and shift rotation is essential to effectively support the 24/7 manufacturing facility. Company Overview At FUJIFILM Biotechnologies, we're leading the charge in advancing tomorrow's medicines. If you want to be a part of life-impacting projects alongside today's most innovative biopharmaceutical companies, FUJIFILM Biotechnologies could be the right place for you. From our Bioprocess Innovation Center to our cGMP-compliant manufacturing site, we thrive on collaboration, creativity, and purpose. Whether your expertise lies in research, manufacturing, or production, you'll find a home here where your efforts directly improve patients' lives. Together, let's shape the future of healthcare. Situated at the cross-section of Morrisville and Research Triangle Park (RTP), North Carolina, our site is at the heart of a booming biotech hub surrounded by top universities, vibrant communities, and various outdoor opportunities. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of “giving our world more smiles.” Visit: *************************************************** Job Description Major Accountabilities: Executes, documents, and leads manufacturing processing steps or support activities, process monitoring and control within at least one functional area (e.g., Fermentation, Purification, Recovery, Cell Culture) and one additional core responsibility (e.g., Filtration, Homogenization/ Centrifugation, Fermentation, Chromatography, Cell Culture) Performs in-process testing (e.g., pH, conductivity, visual inspection) Executes validation protocols according to Current Good Manufacturing Practice (CGMP) standard operating procedures (SOPs) Leads the manufacturing suite and manages materials for the assigned manufacturing functional area, as needed Performs manufacturing task execution using all area applicable Distributed Control System (DCS), DeltaV, 800xA, Unicorn, etc. Closes Shop Floor Orders (SFOs) in the Manufacturing Execution System (MES) in a timely manner Serves as the subject matter expert (SME) in at least one of the core responsibilities within the manufacturing assigned area Leads tier 1 discussions, as needed Assists senior level associates or supervisor with scheduling daily activities on the manufacturing floor, as needed Maintains training to perform all required activities Performs other duties, as assigned Knowledge, Skills & Abilities: Effective communication, both written and verbal Strong knowledge of CGMP and safety regulations, and pharmaceutical industry standards Proficient understanding of manufacturing run cadence and order of shift activities Ability to work in a team environment and willingness to train or mentor others Strong time management and troubleshooting skills Ability to initiate a deviation and progress to impact assessment in designated functional area Ability to initiate a work order in the Computerized Maintenance Management System (CMMS) Must be able to support 24/7 manufacturing facility working shift (2-2-3 day/night) Minimum Education and Experience Requirements: High School Diploma/GED with 6+ years of experience in a CGMP manufacturing environment; or Associate degree in life science, engineering, or relevant technical field with 4+ years of experience in a CGMP manufacturing environment; or Bachelor's degree in life science, engineering, or relevant technical field with 2+ years of experience in a CGMP manufacturing environment; or Equivalent Military training or experience Preferred Education and Experience Requirements: Experience with unit operation (e.g., Cell Culture, Fermentation, etc.) BioWork certificate Physical Demands: Will work in environment which may necessitate respiratory protection. Ability to discern audible cues. Ability to inspect or perform a task with 20/20 corrected vision, visual acuity, including distinguishing color. Ability to ascend or descend ladders, scaffolding, ramps, etc. Ability to stand for prolonged periods of time up to 240 minutes. Ability to sit for prolonged periods of time up to 240 minutes. Ability to conduct activities using repetitive motions that include wrists, hands and/or fingers. Ability to conduct work that includes moving objects up to 33 pounds. Ability to bend, push or pull, reach to retrieve materials from 18” to 60” in height, and use twisting motions. Will work in warm/cold environments (0-100F) To all agencies: Please, no phone calls or emails to any employee of FUJIFILM about this requisition. All resumes submitted by search firms/employment agencies to any employee at FUJIFILM via-email, the internet or in any form and/or method will be deemed the sole property of FUJIFILM, unless such search firms/employment agencies were engaged by FUJIFILM for this requisition and a valid agreement with FUJIFILM is in place. In the event a candidate who was submitted outside of the FUJIFILM agency engagement process is hired, no fee or payment of any kind will be paid. *#LI-Onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (HR_*****************).

Who We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services' companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EV go's Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. The Role Due to growing demand for our services, we are looking to add additional Fuel Field Technicians to our team. The Fuel Field Technician will provide preventative maintenance, troubleshooting, phase separation correction, tank cleaning and other related services for our fuel customers. The Fuel Field Technician will consistently exceed customers' expectations by exhibiting a strong work ethic, respect and empathy for the team and our customers as well as contribute to a culture of curiosity and responsiveness. The ideal candidate will enjoy working independently, have a mix of mechanical and technical skills and possess a strong desire to learn. Role and Responsibilities ·Undergo specialized training led by experienced OWL Services technician and demonstrate competency in all areas within a specified time frame. ·Perform highly diversified duties involved with preventative maintenance, troubleshooting, phase separation correction, tank cleaning and other related services on clients' fuel equipment as instructed. ·Respond and complete service calls and emergencies in a prompt and professional manner. ·Complete company-mandated administrative paperwork regarding customer service requests, services performed, tools required, etc. ·Comply with all appropriate safety practices and procedures according to applicable federal, state, local and company codes/regulations/requirements. ·Maintain open lines of communication with other team members as necessary. ·Participate in on-call rotation system where after-hours service duties may be necessary. ·Display a commitment to safety at all times. ·Drive safely to and from customer sites. ·Participate in regular tasks that contribute to helping keep the shop and office area clean and orderly. ·Other duties and responsibilities as assigned. Required skills and qualifications · Must be able to read, write and speak English fluently so as to communicate effectively with clients and team members. · High School diploma or equivalent. · Some field technician experience preferred. · Must have and maintain a current and valid driver's license. · Must have and maintain a clean driving record. · Possess these core competencies: Honesty/Integrity/Humility, Strong Work Ethic/Enthusiasm, Commitment to Pursuit of Knowledge and Cooperation/Teamwork. · Possess mechanical aptitude and problem solving mindset. · High level of adaptability to change since much of the work is emergency service in nature and highly unpredictable. · Ability to work some nights as required and participate in a rotational on-call weekend schedule. · Self-motivated with a passion for excellence and self-improvement. Physical demands/Work Environment The work environment characteristics and physical demands described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. ·While performing the duties of this job, the employee often works near moving mechanical parts and is occasionally exposed to risk of electrical shock or flammable mixtures. ·The noise level in the work environment is usually moderate. ·While performing the duties of this job, the employee is regularly required to walk and talk or hear. ·The employee frequently is required to stand. ·The employee is occasionally required to sit; use hands to reach, handle, or feel objects, tools, or controls; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. ·The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 50 pounds. ·Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. ·Specific smell ability is required; recognize the smell of various fuels. Compensation and Benefits 10 Paid Holidays Flexible Time Off 401(k) Company Match Health, Dental, and Vision Insurance HSA and FSA Disability & Occupational Accident Insurance Company-Paid Life Insurance Policy Employee Assistance Program (EAP) World-class paid training program for you to learn the skills for long term career success.

Essential Duties & Responsibilities: Responsible for interpreting ASME and similar industry codes. Responsible for following established quality procedures and processes. Perform inspections of purchased parts, assemblies and finished company products. Able to read and interpret P&ID and PFD drawings as required. Able to use machine tools and precision inspection instruments to determine compliance with drawing tolerances. Able to inspect and determine acceptability of units and assemblies under pressure tests (hydrostatic, snoop-leak and pneumatic). Inspects surface preparation and coatings/linings; Able to use surface preparation standards and blast comparators and DFT gauges to determine compliance with drawing tolerances. Reject and disposition subassemblies or finished products as required. Work with shop personnel for accuracy and completion of shop documentation. Prepare, maintain, and approve required quality documentation and inspection records. Work with vendors to ensure quality of purchased parts for company use. May provide Quality interface with customers and third party inspectors. May direct workers engaged in inspection and testing activities. May provide QC inspections and supervision at vendor/subcontractor locations. Required Skills or Tools: High school diploma or equivalent NACE level I or II preferred Minimum of 5 years of experience in quality control inspection Ability to read and interpret blueprints and technical documents Ability to read, write, speak and understand basic English, Spanish Bilingual a plus Computer literate in basic computer applications (email, MS applications, etc.) Must have working knowledge of various industry codes and local regulations, ASME, AWS, NACE, API, etc. Familiarity with ASME requirements as they apply to pressure vessels and process piping testing.

We are looking to add a Quality Inspector to our Broadwind Industrial Solutions team in Sanford, NC due to business growth! This is a first shift, Monday - Friday position with schedule flexibility. The Inspector will check the quality of incoming and outgoing material and products as well as production procedures. This position will be a firm advocate of quality by ensuring products inspected meet customer requirements. RESPONSIBILITIES AND ESSENTIAL FUNCTIONS * Audit and monitor quality requirements in accordance with the company quality assurance policies and customer specifications. * Conduct in-process, in-coming Receiving, and final part inspections. * Initiate identification and control of Non-Conforming material. * Document and report inspection findings and results and monitors corrective actions to inspection findings. * Perform accurate mechanical, physical and visual inspection of raw materials, components, and sub-assemblies as per Inspection Plans and Specification Requirements. * Perform first article inspections to support the component qualification process. * Read and interpret specifications and part prints. * Ensure calibration and maintenance is performed on inspection equipment. * Perform material kit audits to ensure accuracy and integrity of the kitting process. * Perform product identification and traceability activities, as required. * Work with other company personnel to resolve inspection questions. * Conduct various tests and quality checks on finished products. Ensure that product have been tested and fall within standards, measured to specifications and within tolerances, readability of labels, etc. * Participate in Internal Audits. * Ability to safely operate forklift equipment. * Keep a clean and orderly work area. Comply with all quality, safety, and work rules and regulations. * All other duties as assigned. QUALIFICATIONS Academic/Experience/Credentials/Certifications * High school diploma or equivalent. Additional education and certifications a plus. * Minimum of two years of quality inspection experience in a Fabrication/Manufacturing environment. * Experience with ISO:9001:2015. * Experience with the use of tape measure, calipers, thread gages. * Weld inspection experience is desirable. Specialized Skills/Knowledge/Ability * Ability to read blueprints and understand technical specifications including GD&T. * Proficient at preparing customer quality documents, to include CAVs and ballooned drawings. * Knowledge of quality control standards and testing methodologies. * Strong attention to detail. * Good organizational skills. * Proficient computer skills (Excel/Word) and ability to learn and navigate ERP systems and efficiently enter information in the system. * Good command of the English language both written and verbal. * Ability to work in a fast-paced environment with demonstrated ability to manage multiple competing tasks and demands. * Ability to read, write and follow established methods and procedures. * Ability to perform shop math. * Ability to wear Personal Protective Equipment (PPE) (Safety glasses, steel-toed shoes). * Must be able to lift up to 50lbs on a regular basis. * Perform work in a non-climate-controlled shop environment.

Quality Control Inspector We are seeking a detail-driven and experienced Quality Control (QC) Inspector to support our ductwork and piping fabrication shop. QC Inspector ensures units meet industry, and quality standards from production through final inspection and documentation. This role requires hands-on verification of mechanical systems processes, with a focus on documentation, testing, and cross-functional coordination. Key Responsibilities: Inspect duct and piping assemblies to verify compliance with fabrication drawings, specifications, and submittals. Audit manufacturing processes to ensure adherence to Industry standards and project requirements. Verify that all required product testing has been conducted and documented accurately. Complete equipment inspections and Factory Acceptance Testing (FAT) support, including coordination. Perform welding inspections, including in-process and final visual inspections. Inspect pipe installations in accordance with P&ID schematics and system requirements. Review and verify test reports, quality records for completeness and accuracy. Ensure proper documentation, record-keeping, and turnover documentation is complete and organized. Qualifications: Familiarity with quality control specifications mechanical systems (Ideal). Key Skills: Proficient in documentation. Strong verbal and written communication skills, with attention to technical documentation. Ability to interpret P&IDs, isometric drawings, and mechanical fabrication blueprints. Excellent problem-solving, coaching, and cross-functional collaboration skills. Knowledge of shop safety standards and procedures. Experience managing multiple priorities in a fast-paced, production-driven environment. Be part of a company committed to quality, safety, and customer satisfaction.