Technician jobs at CPG International Holdings LP - 2268 jobs

In addition to assigned field service duties, is responsible for training, assigning, monitoring, checking and coordinating work of the team. Assists Service Manager with scheduling and executing maintenance and troubleshooting work of other FST's. Provides input to and fills in for Service Manager as needed. Considered a technical expert who can work independently with limited technical oversight. In addition to assigned field service duties, is responsible for training, assigning, monitoring, checking and coordinating work of the team. Assists Service Manager with scheduling and executing maintenance and troubleshooting work of other FST's. Provides input to and fills in for Service Manager as needed. Considered a technical expert who can work independently with limited technical oversight. Essential Duties: Maintains a safe and well-organized work environment and models all health, safety and environmental procedures. Performs Preventative Maintenance (PM) to standard with no help. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple types of equipment including compressor packages, gas process and power generation equipment used within the region. Leads a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Essential Duties: Maintains a safe and well-organized work environment and models all health, safety and environmental procedures. Performs Preventative Maintenance (PM) to standard with no help. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple types of equipment including compressor packages, gas process and power generation equipment used within the region. Leads a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Archrock is a premier provider of natural gas compression services to customers in the energy industry throughout the U.S. and a leading supplier of aftermarket services to customers who own compression equipment. With approximately 1,000 employees, our unmatched expertise and team of highly qualified, certified technicians are backed by more than 70 years of industry experience. Archrock is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Performs maintenance and repair activities on gas compression and/or process equipment, at customer's location, as directed. Acts as a technical resource for more complex issues in assigned area. Performs maintenance and repair activities on gas compression and/or process equipment, at customer's location, as directed. Acts as a technical resource for more complex issues in assigned area. Essential Duties: Maintains a safe and well-organized work environment and models all health, safety and environmental procedures. Performs Preventative Maintenance (PM) to standard with no help. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple types of equipment including compressor packages, gas process and power generation equipment used within the region. Leads a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Essential Duties: Maintains a safe and well-organized work environment and models all health, safety and environmental procedures. Performs Preventative Maintenance (PM) to standard with no help. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple types of equipment including compressor packages, gas process and power generation equipment used within the region. Leads a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Archrock is a premier provider of natural gas compression services to customers in the energy industry throughout the U.S. and a leading supplier of aftermarket services to customers who own compression equipment. With approximately 1,000 employees, our unmatched expertise and team of highly qualified, certified technicians are backed by more than 70 years of industry experience. Archrock is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Performs maintenance and repair activities on gas compression and/or process equipment, at customer's location, as directed. Acts as a subject matter expert for equipment in assigned area. Mentors and teaches company maintenance standards. Performs maintenance and repair activities on gas compression and/or process equipment, at customer's location, as directed. Acts as a subject matter expert for equipment in assigned area. Mentors and teaches company maintenance standards. Essential Duties: Maintains a safe and well-organized work environment and models all health, safety and environmental procedures. Performs Preventative Maintenance (PM) to standard with no help. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple types of equipment including compressor packages, gas process and power generation equipment used within the region. Leads a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Essential Duties: Maintains a safe and well-organized work environment and models all health, safety and environmental procedures. Performs Preventative Maintenance (PM) to standard with no help. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple types of equipment including compressor packages, gas process and power generation equipment used within the region. Leads a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Archrock is a premier provider of natural gas compression services to customers in the energy industry throughout the U.S. and a leading supplier of aftermarket services to customers who own compression equipment. With approximately 1,000 employees, our unmatched expertise and team of highly qualified, certified technicians are backed by more than 70 years of industry experience. Archrock is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Performs maintenance and repair activities on gas compression and/or process equipment, at customer's location, as directed. Acts as a subject matter expert for equipment in assigned area. Mentors and teaches company maintenance standards. Performs maintenance and repair activities on gas compression and/or process equipment, at customer's location, as directed. Acts as a subject matter expert for equipment in assigned area. Mentors and teaches company maintenance standards. Essential Duties: Maintains a safe and well-organized work environment and models all health, safety and environmental procedures. Performs Preventative Maintenance (PM) to standard with no help. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple types of equipment including compressor packages, gas process and power generation equipment used within the region. Leads a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Essential Duties: Maintains a safe and well-organized work environment and models all health, safety and environmental procedures. Performs Preventative Maintenance (PM) to standard with no help. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple types of equipment including compressor packages, gas process and power generation equipment used within the region. Leads a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Archrock is a premier provider of natural gas compression services to customers in the energy industry throughout the U.S. and a leading supplier of aftermarket services to customers who own compression equipment. With approximately 1,000 employees, our unmatched expertise and team of highly qualified, certified technicians are backed by more than 70 years of industry experience. Archrock is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

In addition to assigned field service duties, is responsible for training, assigning, monitoring, checking and coordinating work of the team. Assists Service Manager with scheduling and executing maintenance and troubleshooting work of other FST's. Provides input to and fills in for Service Manager as needed. Considered a technical expert who can work independently with limited technical oversight. Essential Duties : Maintains a safe and well-organized work environment and models all health, safety and environmental procedures. Performs Preventative Maintenance (PM) to standard with no help. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple types of equipment including compressor packages, gas process and power generation equipment used within the region. Leads a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Essential Duties : Maintains a safe and well-organized work environment and models all health, safety and environmental procedures. Performs Preventative Maintenance (PM) to standard with no help. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple types of equipment including compressor packages, gas process and power generation equipment used within the region. Leads a team performing Major Maintenance (MM), Overhaul and MOB / DEMOB projects to standard with limited to no assistance. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Archrock is a premier provider of natural gas compression services to customers in the energy industry throughout the U.S. and a leading supplier of aftermarket services to customers who own compression equipment. With approximately 1,000 employees, our unmatched expertise and team of highly qualified, certified technicians are backed by more than 70 years of industry experience. Archrock is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Performs maintenance and repair activities on gas compression and/or process equipment at customer's location, as directed. Performs maintenance and repair activities on gas compression and/or process equipment at customer's location, as directed. Essential Duties: Maintains a safe and well-organized work environment. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple compressor configurations. Performs Major Maintenance (MM), Overhauls and MOB/DEMOB as part of a team. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Essential Duties: Maintains a safe and well-organized work environment. Performs most Call Outs (CO) without assistance from a technical expert. Diagnoses and repairs mechanical problems on multiple compressor configurations. Performs Major Maintenance (MM), Overhauls and MOB/DEMOB as part of a team. Completes and submits required documentation in an accurate and timely manner. Non-Essential Duties: Performs other duties as assigned. All employees shall be in compliance with the Archrock Health Safety and Environmental Policy and local, statutory and/or regulatory requirements at all times. Archrock is a premier provider of natural gas compression services to customers in the energy industry throughout the U.S. and a leading supplier of aftermarket services to customers who own compression equipment. With approximately 1,000 employees, our unmatched expertise and team of highly qualified, certified technicians are backed by more than 70 years of industry experience. Archrock is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

**Love working with your hands? Enjoy diagnosing and solving problems? Join Blue Compass RV as a Service Technician and work on everything that makes an RV a home on wheels-no engine work required! ** If you have experience in HVAC, Electrical, Plumbing, Carpentry, Mechanical Repair, Maintenance or Appliance Service, we want to talk to you! TRAINING AND CAREER GROWTH: At Blue Compass RV, we offer training like no other in the industry. Whether you're just starting out or have years of experience, we're committed to helping you level up your skills and grow your career. We don't just train you-we invest in your future. Here's what sets our training apart: Hands-on, state-of-the-art technician training All certifications are fully paid-no cost to you Ongoing web-based learning and manufacturer-led workshops On-the-job diagnostics and advanced technical training Clear advancement paths to Master Tech, Service Manager, and beyond COMPENSATION: $25-$35/hourly WHAT WE HAVE TO OFFER: Paid Mentorship program Apprentice Program Retention Bonus Structured Career Path Gas Discount Medical, dental, vision, disability, FSAs, and life insurance! Paid Time Off and paid holidays Employee assistance program Pet insurance Referral Program 5-day work weeks Legal coverage 401K! WHAT YOU WILL DO: Diagnose and repair issues with electrical, plumbing, HVAC, carpentry, and appliance systems Perform scheduled maintenance on RVs including oil changes, battery checks, tire/brake checks, and sealant inspections Install RV accessories including hitches, slide toppers, awnings, backup cameras, satellite systems, furniture, and more Track all parts and materials used and ensure proper documentation of diagnostics, cause, and repairs in work orders Communicate clearly with service advisors and managers about job status, additional needs, and timing Ensure the final product meets quality standards before returning to the customer Keep your work area clean, safe, and organized Attend required all paid company training and stay up to date with product knowledge We're hiring individuals with experience in: Automotive, Appliance Repair, Carpentry, Electrical, HVAC / AC Systems, General Maintenance and Plumbing WHAT WE ARE LOOKING FOR: 1+ year of experience in mechanical, maintenance, repair, or technical repair (RV experience a plus) Comfortable using hand/power tools and working in various environmental conditions (heat, cold, heights, noise, etc.) Valid driver's license with clean driving record Must be able to lift up to 25 lbs and move up to 50 lbs with assistance Basic hand/shop tools required Preferred But Not Required: Certification in HVAC, Electrical, Plumbing, or related trade RVTI or RVIA certification Experience with diagnostic software or systems used in RV maintenance WHO WE ARE Blue Compass RV is the fastest growing RV Company with more than 100+ RV dealerships across the country! We staff each dealership with the best people in the business. We are known for the great care we take with customers and associates alike. You are not just an associate with our company, you are family. TAG1

: John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defense, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description: Under general supervision, the Seal Repair Technician is responsible for all processes related to disassembly and assembly of rotating equipment. The Seal Repair Technician follows instruction from a Repair job packet and router to perform DCI (Dismantle Clean and Inspect) and gives a written description of the wear and condition of critical components seal. This position completes all inspection forms taking pictures of all critical components and uses inspection equipment for proper documentation of the assembly. With assistance identifies, inspects and evaluates material returned, determines repair operations, performs simple shop operations, verify specifications, initiate work and purchase orders. Receives John Crane parts and materials returned by customers and branch offices. Evaluates from a condition of material, checks current drawing revisions and general product knowledge whether material is repairable or non-repairable. · Identifies and inspects material returned. · Ensures all components are properly cleaned and free from foreign material per departmental procedures · Performs the assembly of the seal once the repair has been released to the shop and all components have been replaced or reconditioned and marked ready for assembly. · Under close supervision, repairs returned seals and seal parts. · May perform parts structuring, check cost structure, and determine price of repair, ensures assembly is structured correctly, and price repair. · Determines necessary repair operations, ensures BOM (bill of materials) / drawings / repair parts match. · Performs simple operations on drill press (single spindle), tool post grinder, bead blast polisher and lapping machine. · Verifies part specifications with measuring instruments such as micrometer, vernier caliper, dial indicator and optical flats. · May initiates purchase orders for new jobs if vendors are involved. · Consults with Engineering or Sales departments as necessary. · Maintains necessary records and small inventory of seal parts used for repair orders. · Works from factory work orders, prints, rework orders and verbal instructions. · Assists newer repair personnel as necessary. · Sets up and troubleshoots lapping machines for repair maintenance. · May perform direct contact with customers on service and/or phone, checks computer system for credit and address information, price repairs. Qualifications: High School Diploma or equivalent. 1-2 years of experience in mechanical assembly positions. Experience working with mechanical seals is a plus. Ability to read blueprints a plus. Attention to detail. Ability to lift up to 35 pounds manually. Experience with Microsoft Office. Additional Information: With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Canyon Labs exists to raise the standard of services in the Medical Device and Pharmaceutical markets by providing streamlined and expert solutions in technical consulting, sterilization, analytical testing and packaging. We are committed to ensuring that quality services are delivered by meeting or exceeding customer expectations, continuously improving the effectiveness of the quality system, and ensuring compliance with regulations, standards and directives. Position Title: Toxicology Technician Location: Onsite at Canyon Labs in West Henrietta, New York Schedule: Monday - Friday 8:00AM - 5:00PM Overtime: Occasionally Required Hourly Pay Range: $22.00 - $30.00 Toxicology Technician Job Overview We are seeking a dedicated and detail-oriented Technician to join our dynamic team. The ideal candidate will play a crucial role in supporting in vivo pre-clinical testing work for our customers developing pharmaceuticals and medical devices utilizing small laboratory animals. This position involves working in a fast-paced environment where you will contribute to various projects related to safety and effectiveness. The Technician will utilize their expertise in laboratory techniques and adhere to Good Laboratory Practice (GLP) standards to ensure the integrity of study outcomes. Toxicology Technician Job Duties · Conduct experiments and assist in safety studies, ensuring compliance with established protocols. · Conduct In vivo GLP/GMP/Research Medical Device biocompatibility testing · Assist with in vivo study method development · Responsible for procedures such as health monitoring, observations, test article administration, weighing, identification, blood and tissue collection, extract preparation and animal handling · Assist with in vitro GLP and non-GLP studies (i.e. cytotoxicity) · Prepare and release protocols, reports, data sheets, SOPs and notebooks · Participate in committees as assigned by management · Collaborate with cross-functional teams to facilitate the flow of information and data throughout the testing process. · Document procedures, results, and maintain accurate records in accordance with regulatory requirements . · Assist in the preparation of materials for safety studies, including reagents and samples. · Maintain a clean and organized research laboratory environment, adhering to safety protocols. Toxicology Technician Job Requirements · Bachelor's degree in a relevant field such as biology, vet technology, or life sciences preferred. · Experience in pre-clinical testing or a research laboratory setting is highly desirable. · Proficiency in techniques such as animal handling, substance administration and blood collection preferred. · Strong understanding of pre-clinical safety testing processes including ISO-10993, and Good Laboratory Practice (GLP) guidelines. · Excellent organizational skills with attention to detail and the ability to manage multiple tasks effectively. · Strong communication skills, both written and verbal, to collaborate with team members effectively. · Ability to work independently as well as part of a team in a fast-paced environment. Canyon Labs offers several benefits as part of your total compensation, including but not limited to: Paid Time Off, Sick Time, and Paid Holidays Medical, Dental and Vision Insurance Long term disability insurance, life insurance 401(k) with company match up to 4% At Canyon Labs, we are committed to creating a diverse and inclusive workplace. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, veteran status, or any other protected characteristic under applicable laws.

Founded in 1993, Greystar is a global leader in the residential rental housing industry, known for integrating management, development, and investment expertise. With a presence in local, regional, and international markets, the company leverages its innovative business model to deliver value across all phases of the real estate cycle. Supported by a team of over 28,000 professionals, Greystar creates exceptional living environments and services that elevate the residential experience. The company's commitment to quality and professionalism has earned it a reputation as a trusted and respected global real estate firm. Role Description We are seeking a dedicated, full-time Maintenance Technician for our on-site Lease Up Property located in Mountain View, CA. The Maintenance Technician will be responsible for conducting routine equipment maintenance, troubleshooting issues, and performing repairs and preventive maintenance on various building systems. Duties include monitoring the functionality of mechanical and electrical systems, executing repairs on fixtures and appliances, and ensuring compliance with safety standards. Strong communication and record-keeping skills are also essential. Qualifications Proficiency in Equipment Maintenance, Preventive Maintenance, and Maintenance & Repair Strong Troubleshooting skills to identify and resolve mechanical, electrical, and technical issues Experience with Industrial Maintenance practices and standards Ability to work both independently and as part of a team, demonstrating strong problem-solving and organizational skills Relevant certifications such as HVAC, Electrical, or Plumbing are a plus High school diploma or equivalent required; technical training or certifications preferred Must be able to meet the physical requirements of the role

**Company:** NextEra Energy **Requisition ID:** 92513 Florida Power & Light Company is the largest electric utility in the U.S., providing reliable energy to nearly 12 million Floridians. With one of the nation's most fuel-efficient, cost-effective power generation fleets and industry-leading reliability, we're redefining what's possible in energy. Want to be part of something powerful? Join our outstanding team and help shape the future of energy. **Position Specific Description** Employees in this role lead a team of technical specialists or engineers. Individuals make decisions and recommendations having impact on extensive Technical Services activities of the company. The primary area of responsibilities for this role are in power plant water chemistry and supporting systems. **Job Duties & Responsibilities** + Responsible for the following monthly reporting - Power Plant Water Usage and Consumption, Chemistry Scorecards + Collaborates with ISC for contracts and RFP, RFQ processes + Lead troubleshooting and decision making for fleet assets regarding chemistry + Uses skills in persuasion and negotiation of critical issues + Applies a high degree of creativity, foresight, and mature judgment in anticipating and solving unprecedented engineering and technical complexities + Determines and organizes program and project objectives and requirements + Develops standards and guidelines for diverse technical and engineering activities + Manage documentation and currency of Service Requests, Work Orders, and MOCs in Maximo + Actively participate in efforts to improve productivity and advance fleet reliability + Support parts planning and annual budget planning + Lead a team of chemistry technicians + Manage all remote monitoring tags in PI and utilize all tools available for visualization and trending regarding water chemistry + Initiates and maintains extensive contacts with key staff, regulatory agencies, external /internal auditors, and officials of other organizations / companies. + Initiates and maintains extensive contacts with key staff, regulatory agencies, external /internal auditors, and officials of other organizations / companies. + In depth understanding of power plant chemistry, chemical treatment of plant systems and analytical chemistry + Utilization of quality tools for continuous improvements of laboratory analytical methods. + Online Analyzer troubleshooting and Repair + Knowledgeable on environmental and regulatory requirements for powerplants permits + Performs other job-related duties as assigned **Preferred Qualifications** + Technical / Functional Excellence/Learning + Quality Tools and Techniques + Effective Written Communications + Effective Verbal Communications + High School Grad / GED + Financial Planning + Safety Policy and Practice + Bachelor's or Equivalent Experience + Experience:5+ years + Supervisor/Management Experience:2+ years + Bachelor's - Related to the Fields of Science or Engineering + Six Sigma Green Belt **Job Overview** Employees in this role lead a team of technical specialists or engineers. Individuals make decisions and recommendations having impact on extensive Technical Services activities of the company. **Job Duties & Responsibilities** - Initiates and maintains extensive contacts with key staff and officials of other organizations and companies - Uses skills in persuasion and negotiation of critical issues - Applies a high degree of creativity, foresight, and mature judgment in anticipating and solving unprecedented engineering and technical complexities - Determines and organizes program and project objectives and requirements - Develops standards and guidelines for diverse technical and engineering activities - Performs other job-related duties as assigned **Required Qualifications** - Technical / Functional Excellence/Learning - Quality Tools and Techniques - Effective Written Communications - Effective Verbal Communications - High School Grad / GED - Financial Planning - Safety Policy and Practice - Bachelor's or Equivalent Experience - Experience:5+ years - Supervisor/Management Experience:2+ years **Preferred Qualifications** - Bachelor's - Engineering NextEra Energy offers a wide range of benefits to support our employees and their eligible family members. Clickto learn more. **Employee Group:** Exempt **Employee Type:** Full Time **Job Category:** Technical Specialist **Organization:** Florida Power & Light Company **Relocation Provided:** Yes, if applicable NextEra Energy is an Equal Opportunity Employer. Qualified applicants are considered for employment without regard to race, color, age, national origin, religion, marital status, sex, sexual orientation, gender identity, gender expression, genetics, disability, protected veteran status or any other basis prohibited by law. NextEra Energy provides reasonable accommodation in its application and selection process for qualified individuals, including accommodations related to compliance with conditional job offer requirements, consistent with federal, state, and local laws. Supporting medical or religious documentation will be required where applicable and permitted by applicable law. To request a reasonable accommodation, please send an e-mail to, providing your name, telephone number and the best time for us to reach you. Alternatively, you may call **************. Please do not use this line to inquire about your application status. NextEra Energy will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. NextEra Energy **does not** accept any unsolicited resumes or referrals from **any third-party recruiting firms or agencies** . Please see ourfor more information. \#LI-ER1

Florida Power & Light Company is the largest electric utility in the U.S., providing reliable energy to nearly 12 million Floridians. With one of the nation's most fuel-efficient, cost-effective power generation fleets and industry-leading reliability, we're redefining what's possible in energy. Want to be part of something powerful? Join our outstanding team and help shape the future of energy. Position Specific Description Employees in this role lead a team of technical specialists or engineers. Individuals make decisions and recommendations having impact on extensive Technical Services activities of the company. The primary area of responsibilities for this role are in power plant water chemistry and supporting systems. Job Duties & Responsibilities * Responsible for the following monthly reporting - Power Plant Water Usage and Consumption, Chemistry Scorecards * Collaborates with ISC for contracts and RFP, RFQ processes * Lead troubleshooting and decision making for fleet assets regarding chemistry * Uses skills in persuasion and negotiation of critical issues * Applies a high degree of creativity, foresight, and mature judgment in anticipating and solving unprecedented engineering and technical complexities * Determines and organizes program and project objectives and requirements * Develops standards and guidelines for diverse technical and engineering activities * Manage documentation and currency of Service Requests, Work Orders, and MOCs in Maximo * Actively participate in efforts to improve productivity and advance fleet reliability * Support parts planning and annual budget planning * Lead a team of chemistry technicians * Manage all remote monitoring tags in PI and utilize all tools available for visualization and trending regarding water chemistry * Initiates and maintains extensive contacts with key staff, regulatory agencies, external /internal auditors, and officials of other organizations / companies. * Initiates and maintains extensive contacts with key staff, regulatory agencies, external /internal auditors, and officials of other organizations / companies. * In depth understanding of power plant chemistry, chemical treatment of plant systems and analytical chemistry * Utilization of quality tools for continuous improvements of laboratory analytical methods. * Online Analyzer troubleshooting and Repair * Knowledgeable on environmental and regulatory requirements for powerplants permits * Performs other job-related duties as assigned Preferred Qualifications * Technical / Functional Excellence/Learning * Quality Tools and Techniques * Effective Written Communications * Effective Verbal Communications * High School Grad / GED * Financial Planning * Safety Policy and Practice * Bachelor's or Equivalent Experience * Experience:5+ years * Supervisor/Management Experience:2+ years * Bachelor's - Related to the Fields of Science or Engineering * Six Sigma Green Belt Job Overview

The Service Delivery Lead is responsible for ensuring that outsourced IT services are delivered in accordance with the Statement of Work, consistently meeting and enhancing Service Level Agreements (SLAs), and addressing day to day service delivery issues. Key responsibilities include conducting regular performance reviews of the outsourcing partner, managing and updating SLAs and associated metrics, and improving business user satisfaction through effective ticket management in ServiceNow. The role also focuses on maintaining uninterrupted application availability with zero or near zero downtime.The Lead is responsible for ensuring the highest level of service quality, closely liaising with other Service Leads, "ITIL Service Management" process owners and managers, Corporate IT, Architects and other stakeholders to ensure compliance with ConEdison strategy, policies and standards for the entire lifecycle of the services delivered. Required Education/Experience Master's Degree and a minimum of 2 years relevant full-time work experience or Bachelor's Degree and a minimum of 3 years relevant full-time work experience. Preferred Education/Experience Bachelor's Degree in IT, Computer Science, Business Administration, Engineering or decision sciences including mathematics, analytics and/or quantitative methods and a minimum of 3 years relevant full-time work experience in developing applications/databases, troubleshooting technical issues, and knowledge of project management methodology including supervisory experience. Relevant Work Experience Extensive experience working within an IT organization supporting delivery of business-critical services, preferred. Strong background in application support and operational issue resolution, ensuring minimal service disruption, preferred. Proven ability to lead meetings, coordinate stakeholders, and drive alignment across IT and business teams, preferred. Demonstrates strong work ethic, integrity, and accountability in managing service delivery outcomes, preferred. Skilled at managing shifting priorities and multiple assignments while meeting schedule and budget expectations, preferred. Experience leading application support teams to maintain high service quality and performance, preferred. Hands on experience developing applications/databases, providing deeper insight into technical service issues, preferred. Proficient in managing supplier/vendor contracts and ensuring adherence to SLAs, performance targets, and compliance requirements, preferred. Possesses formal Project Management and/or Business Analysis skills to support planning, transitions, and continuous improvement initiatives, preferred. Experienced contributor to medium- to large-scale system development projects, with strong technical understanding supporting effective service oversight, preferred. Skills and Abilities Effective negotiation skills Effective interpersonal skills Strong written and verbal communication skills Excellent organizational skills Demonstrated problem solving skills Must be proficient in Microsoft Office including Word, Excel, Outlook and PowerPoint, etc. Licenses and Certifications Driver's License Required Physical Demands Sit or stand to use a keyboard, mouse, and computer for the duration of the workday Additional Physical Demands The selected candidate will be assigned a System Emergency Assignment (i.e., an emergency response role) and will be expected to work non-business hours during emergencies, which may include nights, weekends, and holidays. Must be able and willing to travel within Company service territory, as needed. Flexible and able to work off-hours to support deployments, resolve production problems or respond to corporate emergencies, as needed. Core Responsibilities Maintain relationship with outsourced partner to ensure the effective delivery of services in scope and act as contact person with IT partner regarding service delivery requirements, issues, changes and performance. Manage and oversee performance relative to Service Level Agreements. Conduct regular service reviews; follow escalation procedure where appropriate. As operational problems occur, review recovery and permanent fix plans; Follow up on root-cause and trend analyses to identify areas of improvement in services in scope. Review and authorize work orders / requests and ensure that all required ConEdison approvals are obtained. Oversee operational change management: review change requests, participate in change meetings as required, approve changes within decision making authority, administer change freezes, review and approve post implementation reviews and reporting. Ensure IT partners performance of any compliance and controls items. Support the appropriate implementation of Transition, Transformation and continuous improvement initiatives. Support IT process improvement including recommending opportunities for systems or process improvements. Perform other related tasks and assignments as needed.

The Service Delivery Lead is responsible for ensuring that outsourced IT services are delivered in accordance with the Statement of Work, consistently meeting and enhancing Service Level Agreements (SLAs), and addressing day to day service delivery issues. Key responsibilities include conducting regular performance reviews of the outsourcing partner, managing and updating SLAs and associated metrics, and improving business user satisfaction through effective ticket management in ServiceNow. The role also focuses on maintaining uninterrupted application availability with zero or near zero downtime.The Lead is responsible for ensuring the highest level of service quality, closely liaising with other Service Leads, "ITIL Service Management" process owners and managers, Corporate IT, Architects and other stakeholders to ensure compliance with ConEdison strategy, policies and standards for the entire lifecycle of the services delivered. Required Education/Experience * Master's Degree and a minimum of 2 years relevant full-time work experience or * Bachelor's Degree and a minimum of 3 years relevant full-time work experience. Preferred Education/Experience * Bachelor's Degree in IT, Computer Science, Business Administration, Engineering or decision sciences including mathematics, analytics and/or quantitative methods and a minimum of 3 years relevant full-time work experience in developing applications/databases, troubleshooting technical issues, and knowledge of project management methodology including supervisory experience. Relevant Work Experience * Extensive experience working within an IT organization supporting delivery of business-critical services, preferred. * Strong background in application support and operational issue resolution, ensuring minimal service disruption, preferred. * Proven ability to lead meetings, coordinate stakeholders, and drive alignment across IT and business teams, preferred. * Demonstrates strong work ethic, integrity, and accountability in managing service delivery outcomes, preferred. * Skilled at managing shifting priorities and multiple assignments while meeting schedule and budget expectations, preferred. * Experience leading application support teams to maintain high service quality and performance, preferred. * Hands on experience developing applications/databases, providing deeper insight into technical service issues, preferred. * Proficient in managing supplier/vendor contracts and ensuring adherence to SLAs, performance targets, and compliance requirements, preferred. * Possesses formal Project Management and/or Business Analysis skills to support planning, transitions, and continuous improvement initiatives, preferred. * Experienced contributor to medium- to large-scale system development projects, with strong technical understanding supporting effective service oversight, preferred. Skills and Abilities * Effective negotiation skills * Effective interpersonal skills * Strong written and verbal communication skills * Excellent organizational skills * Demonstrated problem solving skills * Must be proficient in Microsoft Office including Word, Excel, Outlook and PowerPoint, etc. Licenses and Certifications * Driver's License Required Physical Demands * Sit or stand to use a keyboard, mouse, and computer for the duration of the workday Additional Physical Demands * The selected candidate will be assigned a System Emergency Assignment (i.e., an emergency response role) and will be expected to work non-business hours during emergencies, which may include nights, weekends, and holidays. * Must be able and willing to travel within Company service territory, as needed. * Flexible and able to work off-hours to support deployments, resolve production problems or respond to corporate emergencies, as needed. Core Responsibilities * Maintain relationship with outsourced partner to ensure the effective delivery of services in scope and act as contact person with IT partner regarding service delivery requirements, issues, changes and performance. * Manage and oversee performance relative to Service Level Agreements. Conduct regular service reviews; follow escalation procedure where appropriate. * As operational problems occur, review recovery and permanent fix plans; Follow up on root-cause and trend analyses to identify areas of improvement in services in scope. * Review and authorize work orders / requests and ensure that all required ConEdison approvals are obtained. * Oversee operational change management: review change requests, participate in change meetings as required, approve changes within decision making authority, administer change freezes, review and approve post implementation reviews and reporting. * Ensure IT partners performance of any compliance and controls items. * Support the appropriate implementation of Transition, Transformation and continuous improvement initiatives. * Support IT process improvement including recommending opportunities for systems or process improvements. * Perform other related tasks and assignments as needed.

USA Compression Partners, LP, (NYSE: USAC) provides mission critical natural gas compression services to large upstream and midstream energy companies. We are an operations-centric, technology driven employer with 800+ employees in 18 states across the US. We owe our success to the quality of our employees, our strong commitment to safety, and our superior service to our customers. Summary: A Lead Service Technician (LST) is responsible for maintenance and service of USA Compression equipment reporting to the Area Service Manager. With minimal supervision and significant autonomy, the typical areas of responsibility include developing Field Service Technicians and being a subject matter expert for them, safely performing scheduled maintenance, maintaining and building customer relationships, and providing first line support for equipment troubleshooting. The LST is involved in start-ups, major maintenance, significant failures and high-end trouble shooting. USA Compression employees are proudly responsible for maintaining a safe and professional work environment and positive workplace aligned with our Pillars culture. Essential Duties and Responsibilities: * Involved in start-ups, major maintenance, significant failures, overhauls, and high-end trouble shooting and advanced diagnostic repair skills on wide variety of equipment. * Lead by example and be a subject matter expert and role model to Field Service Technicians (FST) and assist in their technical skill and professional development. * Ensure USAC maintains run time of natural gas compression units per contractual agreements. * Respond quickly and accurately to customer inquiries and communicate with ASM. * Partner closely with the ASM to ensure a smooth and efficient Area operation. * Maintain and safely operate company vehicle/commercial truck according to company guidelines. * Communicate with sales team to identify new sales, customer or equipment opportunities. * Utilize the WMS and partner with a parts department to ensure sufficient parts inventory for each unit in Area. * Ensure Area units are clean following good housekeeping rules and maintain safe working conditions. * Assist in building the USAC culture through positively representing our image and helping recruit new FSTs. * Assist in supervisory duties in the absence of the ASM or as assigned by the ASM. * Understand and follow company handbook, and all company or customer safety and environmental policies. * Any other duties or responsibilities as assigned by supervisor. Skills/Capabilities and Education: * Technical or trade school certification, college degree or additional work experience in related field. * At least 7 years of experience in gas compression with preference to CAT, Ariel and/or Cummins. * CAT Gas Engine II, Troubleshooting, Electronics certifications; CAT 3500, 3600, ADEM 3 and ADEM 4, Ariel Mechanics 1 and 2, Murphy panel a plus. * Valid driver's license with a Motor Vehicle Record history acceptable to USA Compression. * Strong interpersonal skills with strong written and verbal skills. * Excellent customer service skills with customer field personnel, onsite vendors, and other employees. * Ability to understand written and verbal communication from the company and supervisor including training, procedures, instructions, etc. * Ability to be self-managed and work independently with little or no supervision. Prior management experience is a plus. * High degree of mechanical ability including electrical and natural gas compression. * Ability to teach and communicate both technical and soft skills to FSTs aiding in their training and development. * Experience reading and understanding technical manuals. * Thorough knowledge of relevant HSE procedures and regulations. * Experience in configuring natural gas compression equipment. * Solid computer and communication technology skills. * Ability and interest in further developing people and business management skills. * Ability and flexibility to work extended hours including periodic on-call weekends. * Applicant must have the ability to legally work in the U.S. Working Conditions: * Typically, an LST's work day consists of driving a USA compression service vehicle to customer locations to perform repair and maintenance activities. * Travel is required up to 75% of the time worked. * Periodic lifting requirements in excess of 50 lbs. * Ability to stand and walk on uneven and varied terrain, climb ladders and stairs; and stoop, squat, kneel, crouch and crawl depending on the task requirements. * Exposure to extremes in temperature and weather conditions depending upon assigned location. * Some exposure to high noise levels in excess of 85dBA that require ear protection, as well as exposure to potentially hazardous chemicals and materials. * Working conditions in natural gas compression vary from one job site to another. Some job sites are indoors in compressor stations while other sites are outside, exposed to a variety of weather conditions. * There is a strong emphasis on safety while working with heavy equipment and machinery.

Located at bp's Whiting Refinery in Whiting, Indiana, the **Condition Monitoring Technician** is a member of the Rotating Equipment Engineering Group which consists of Rotating Equipment Engineers, Condition Monitoring Technicians and the Rotating Equipment Engineering Superintendent. The team is accountable for the Life Cycle Management of the refinery's rotating equipment, and jointly responsible, with the Rotating Equipment Engineer, for the development of Life Cycle Management Plans and reliability improvement strategies for assigned rotating equipment. **Key Accountabilities** + Responsible for the day to day health monitoring on assigned rotating equipment; work with Engineering, Operations and Maintenance to resolve identified issues. + Collection, maintenance, and analysis of equipment health monitoring information on assigned rotating equipment. + Maintenance of all vibration monitoring hardware and computer software on assigned rotating equipment. + Analyze vibration, bearing temperature and other rotating equipment health data and recommend solutions to resolve availability issues. + Ensure integrity of vibration trips to allow for safe operation. + Provide technical support and problem solving skills to address rotating equipment availability issues. + Shares, consults with other REG engineering personnel concerning best practices, troubleshooting, recommendations and QC. + Work jointly with Asset, Maintenance and Availability teams to improve equipment availability. + Interact with operations, maintenance, turnarounds and inspection personnel to resolve availability issues. + Support mechanical integrity activities for rotating equipment and compliance targets across the asset areas. + Conduct routine equipment health audits on assigned rotating equipment and drive resolution on identified deficiencies. + Jointly responsible, with the Rotating Equipment Engineer for the development of reliability improvement strategies for assigned rotating equipment. + Troubleshooting cylinder lubrication systems on critical reciprocating compressors. + Balancing of rotating equipment as needed. + Support and drive continual refreshing of technology to ensure monitoring equipment remains consistent with Industry standards, BP corporate specifications and Industry Best Practices. + Work with the Rotating Equipment Engineering Superintendent to pursue capital as needed for group equipment. + Performs facility lubrication oil testing program tasks per "WBU Rotating Equipment Lubrication Management Program" + Jointly responsible, with the Rotating Equipment Engineer, for the development of Life Cycle Management Plans for assigned rotating equipment. **Requirements:** + High School Diploma or equivalent + Proven experience in a petrochemical plant or refinery. **Desirable criteria:** + Machinist and/or Instrument tech experience preferred along with machinery monitoring experience. + Vibration Institute Technician Level I, Level II or other accredited vibration certifications (ISO 18436-1). **Why Join Our Team?** At bp, we provide an excellent working environment and employee benefits such as a great work-life balance, tremendous learning and development opportunities to craft your career path, life and health insurance, medical care package and many others! We support our people to learn and grow in a diverse and exciting environment! We believe that our team is strengthened by diversity. We are committed to crafting an inclusive environment in which everyone is respected and treated fairly. We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, perform crucial job functions, and receive other benefits and privileges of employment. Don't hesitate to get in touch with us to request any accommodations. **Travel Requirement** No travel is expected with this role **Relocation Assistance:** Relocation may be negotiable for this role **Remote Type:** This position is not available for remote working **Skills:** Agility core practices, Backlog Management, Contract Management, Control of Work, Cost-conscious decision-making, Decision Making, Digital Innovation, Equipment strategies, Facilitation, Influencing, Integrity Management, Maintenance and inspection build, Maintenance fundamentals, Maintenance OMS, Management of change, Measurement and metrics, Procedures and practices, Reliability processes and systems, Risk Based Inspection, Risk Management, Safety Leadership, Stakeholder Management, Working with contractors, Work Management **Legal Disclaimer:** We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp's recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please contact us . If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Start your career here! National Fuel is currently hiring Utility Technicians in our Operations Department. Candidates must be able to work in the Buffalo Metropolitan Area as well as other locations within our Western New York service territory. National Fuel is proud to have an inclusive workplace where hard work is rewarded and promotion from within is supported. We offer exciting career opportunities for talented and ambitious job seekers and encourage you to apply today. PRIMARY RESPONSIBILITIES: * Accurately and efficiently read residential and commercial gas meters * Manually input meter readings into an iPhone to ensure correct billing * Work outdoors extensively in all types of weather and walk for long distances * Handle customer inquiries and perform collection work * Identify and report meter irregularities and report safety hazards * Work in potentially hazardous environments such as dark basements, roof tops or industrial facilities MINIMUM QUALIFICATIONS: * Must have a high school diploma or equivalent * Must possess a valid driver's license with a driving record in good standing * The ability to drive a small company truck or van * Basic literacy is required. The ability to read, legibly prepare written documentation and interpret information is essential for success in this role * Available to work a flexible schedule Monday - Friday from 8:00 am - 4:30 pm. * Proven track record of good attendance and committed to workplace safety * The successful candidate will be required to pass a DOT mandated drug test, as well as participate in random drug testing. The DOT maintains a list of banned substances which includes medicinal or recreational marijuana. * Ability to work independently while being self-motivated * Strong communication/customer service skills * Solid computer and data entry skills PREFERRED QUALIFICATIONS: * Proven mechanical skills as well as possess proficient skills in the use of hand tools * Prior experience using handheld devices or computers to report data * Familiarity with assigned route and local geography is helpful ABOUT NATIONAL FUEL: National Fuel is a diversified energy company headquartered near Buffalo, NY. Our employees continue to be the most important part of our Company and have made us who we are today. We are dedicated to the communities in which we live and work and have nearly 2,000 employees in Western NY and Northwest PA. COMPENSATION AND BENEFITS: This is a position within the Company's collective bargaining unit with an hourly rate of pay of $23.00 plus daily incentive pay based on the number of meters read. National Fuel offers a comprehensive benefits package including the following: * Medical and Prescription Drug Coverage · Paid Sick Time · Dental Coverage · Parental Leave for Mothers and Fathers · 401(k) with Company Match · Life Insurance · Company Funded Retirement Savings Account · Flexible Spending Account · Paid Vacation & Company Holidays · Charitable Giving Programs HOW TO APPLY: For confidential consideration, please submit your resume and cover letter (preferably in PDF format) to **************** by 1/23/2026. Attachments with a .docm extension will not be accepted. Please reference position #26-003NY- Utility Technician (Buffalo Metro Area) in the subject line of your email.

To maintain and repair equipment and systems. ESSENTIAL DUTIES AND RESPONSIBILITIES To safely maintain and repair any equipment with the help of other personnel as needed Perform welding and cutting operations on pipe and structural equipment Maintain organization and cleanliness of the maintenance shop and work areas Cutting steel with cutting torches Welding critical equipment Using hand and power tools to remove fasteners Repairing pumps Repairing gear boxes and transmission equipment Carrying tools and equipment to and from work areas Sweeping Job Requirements EDUCATION / EXPERIENCE * High School Diploma or GED. * Semi skilled or three to six months related experience and/or training; or equivalent combination of education and experience. * Must be able to lift up to 50 pounds * Must be able to use welding and cutting equipment * Must be able to read and understand instructions * Must be able to climb ladders * Must be available for call outs during non-scheduled work hours

Here's What You Need Education High school diploma or equivalent with ten (10) years registered EPT required or Bachelor's Degree in a Healthcare related field with seven (7) years experience with documentation of one hundred fifty (150) NIOM cases required or IOM accredited certificate program with documentation of fifty (50) NIOM cases required Experience Seven (7) years Neurodiagnostics experience (if Bachelors held) required or Ten (10) years Neurodiagnostics experience (if a high school diploma held) required Licenses and Certifications R. EP T. - Registered EP Technician (if no Bachelor's degree) upon hire required and BCLS - Basic Cardiac Life Support (prior to providing independent patient care and maintained quarterly) required CNIM Certification preferred Skills Must be able to speak, read and write English with a high level of understanding. Must be able to see the computer read outs for EEG/EMG tracings and computers used in the provision services. What you will do Serves as a preceptor to assist in the training of EP Technicians and EEG Technicians. Assists in verifying clinical competencies for EP & EEG Technicians Provides patient care using Neurodiagnostic procedures for neonatal through geriatric age patients. Maximizes safe electro-neurodiagnostic monitoring procedures for at-risk surgeries. Collaborates at a high-level efforts between surgeons, the O.R, the neurologist panel, contract staff and department crew to obtain highest level of quality patient testing/monitoring coverage. Prints and scans 24-hour record denoting significant data Conducts patient assessments to ensure diagnostic testing capacity is relevant to patient condition with the ordered tests Manages IOM exams that are not interpreted Accurately applies, assesses, utilizes and communicates differences specific to each of the basic IOM tests Identifies adverse reactions to IOM testing and emergency measures for such initiated Monitors patient safety by taking pro-active steps to reduce or eliminate patient risks Performs timely documentation Neurodiagnostic procedures in CareConnect Verifies physician's orders for IOM monitoring and testing Completes required ambulatory records to ensure they are accurate, timely and readily available Takes proactive and assertive action to address concerns with patient orders by calling the physician Communicates concerns, ideas or recognition involving practices or policies that will affect financial issues Additional perks of being an Intraoperative Monitoring (IOM) Technologist: Benefits include 401k, PTO, medical, dental, Paid Parental Leave, flex spending, tuition reimbursement, Student Loan Repayment Program as well as several other benefits At Texas Health, our people make this a great place to work every day. Our inclusive, supportive, people-first, excellence-driven culture make us a great place to work A supportive, team environment with outstanding opportunities for growth Entity Highlights: Texas Health Ft. Worth is a 707-bed Magnet-designated, full-service hospital serving out community since 1930. We specialize in cardiovascular care, high-risk obstetrics, gynecology, neurosciences, sports medicine and emergency medicine. Plus, we're an accredited Cycle III Chest Pain Center, an Emergency Center of Excellence and provide gynecology, neonatal intensive care, respiratory therapy and orthopedic medicine. Texas Health Ft. Worth is Joint Commission-certified in both Heart Failure and Chest Pain, a Comprehensive Stroke Center, an Acute Heart Failure Center, a Level I Trauma Center, a designated Magnet hospital and the Best Place to Have a Baby in Tarrant County. We are a top choice in North Texas for emergency services, women's services, cardiac care and much more. Explore our Texas Health careers site for info like Benefits, Job Listings by Category, recent Awards we've won and more. Do you still have questions or concerns? Feel free to email your questions to *************************** Intraoperative Monitoring (IOM) Technologist (CNIM) Work location\: Sid Richardson Pavilion\: 700 5th Ave., Ft. Worth, TX 76104 Work hours\: Full-time (40 hours); 6\:30AM-5\:00PM 4 shifts per weekday. On call twice per week and rotating on call weekends Department Highlights: We are a full-sevice Neurodiagnostics unit. We provide EEG, EMU/Continuous monitoring and Neuro Intro-operative monitoring. We are an ABRET credentialed lab in NIOM. We currently have 13 fully trained technicians. We have a 4-bed EMU.