CPM Roskamp jobs - 39,574 jobs

BECOME A US FOODS DRIVER! Ready to build a career with a company that's leading the foodservice industry? Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $27.90 and $30.90. As applicable, this role will also receive: overtime compensation, incentives (i.e., based on cases, mileage, stops). Schedule: 5-day work week between Monday and Saturday Start time between 3am-5am; End of shift is at completion of route 45+ hours/week Some travel may be required to domicile locations We help YOU make it! The starting pay is $27.90 per hour! Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. Main Ingredients of the Job Safely drive trucks to customers and meet scheduled customer delivery times Carefully unload products from the trailer with a two-wheeler, pallet jack, or by hand and place in designated customer storage areas Verify accuracy of delivery with customers and obtain proper signatures Handle collections and payments from customers when applicable Professionally perform customer service responsibilities to enhance our client experience Perform all pre-trip and post-trip equipment inspection Physical Requirements Ability to lift/carry/push/pull 20 to 80+ lbs. of product repetitively during each shift required Comfortable driving and working in inclement weather conditions with frequent stops (10+ per shift) required What You Bring to the Table Register to the FMCSA Clearinghouse* Must be at least 21 years of age Must have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualifications Minimum of six months commercial driving experience (any industry) OR three months commercial driving experience in the food and/or beverage delivery industry required Ability to operate manual transmission preferred; may be required in specific locations Must be able to read and communicate in the English language - able to hold a conversation, to understand highway traffic signs and signals, to respond to official inquiries, and to enter information on reports and records. Why US Foods US Foods helps our customers Make It , with products and services that shape the communities where we live and work. Opportunities in our company abound for skilled, forward-thinking associates. Great drivers are crucial to the US Foods team and one of the important faces of our organization. On and off the road, our drivers strive for integrity and reliability, while building trusting relationships with customers. At the foundation of those efforts are our cultural beliefs, the pillars that define our work ethic, collaborative spirit and service. Together we help our customers make it, but we also believe in helping our drivers make it! At US Foods , we are committed to Total Rewards that respect and reward our associates for their dedication and hard work. *Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver's license (CDL) and commercial learner's permit (CLP) holders' drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit ******************************************** and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page. Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $27.90 and $30.90.

At Vertiv, we design, manufacture, and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. We are the trusted Service Provider for 70%+ of Fortune 500 companies, including industry-leading data centers and providers of colocation and cloud service. Why Vertiv is the best company for Field Service professionals: Vertiv is an industry leader in Technology and Services with a best-in-class Customer Service and Safety culture Company leaders have many years of hands-on Field Service experience in this industry and many others Tremendous focus is placed on employee technical and leadership development Technical Training takes place in our state of the art Training Academy or Regional Training Center with a strong focus on immersive, hands-on learning Competitive benefits include: Company vehicle, smartphone, laptop, personal protective equipment (PPE), other tools-of-the-trade, 401k, Profit Sharing, & Generous PTO/Vacation Plan, Medical, Vision & Dental & more Abundant technical resources including 24/7 Technical/Factory Support and technical online libraries of product documentation, work instructions, and self-help troubleshooting guides Company-wide commitment to promoting a strong work/life balance An employer-of-choice for Veterans with technical backgrounds The Field Service Technician is primarily responsible for scheduled and remedial (break-fix) service on Small to Medium UPS, Power Distribution Units & Battery system products (2-120KVA) serviced by Vertiv, commensurate with appropriate classroom and on-the-job training. The Field Service Technician is required to establish, promote and maintain excellent rapport with all customers, co-workers, sales representatives and others as appropriate. The Field Service Technician is primarily responsible to support products and services sold to our “Edge” market segment, including retail, financial, and municipal customers. RESPONSIBILITIES: ROLE Perform service tasks as assigned and as per company policies and procedures Capable of working under direct supervision or independently based upon training completion Render on-site and phone assistance to customers Communicate with Technical Support on technical or procedural issues Implement Field Change Notices per published guidelines Keep current on Safety Bulletins, Safety Field Change Notices, Field Change Notices, and Service Tips SAFETY Operate in a safe manner in accordance with published safety guidelines Maintain and operate company vehicle in accordance with local laws and company policy Must wear appropriate PPE as per company guidelines and accordance with job duties Adhere to work hours policy guidelines - “14 hours rule” Report all work related accidents or injuries within 24 hours to the appropriate personnel. ADMINISTRATION Complete accurate and timely administrative tasks (i.e. Time cards, expense report, mileage reports, Service Request task closure, service reports) per company guidelines Maintain individual inventory and perform cycle counts in accordance with company policy Maintain company property (company vehicle, credit cards, PPE, test equipment, laptop, etc.) per company policies CUSTOMER SATISFACTION Provide proper and adequate communication to internal and external customers Provide estimated time of arrival to the customer where applicable Complete scheduled maintenance documentation properly and provide to the customer and local office upon completion of each assignment Strive to provide all customers a “first time fix” for their equipment Maintain customer satisfaction rates per company guidelines Attend Customer Meetings as required PERFORMANCE Maximize productivity by combining service opportunities Complete all technical and administrative work in an efficient and timely manner Capable of making technical and commercial decisions under pressure Properly evaluate site and equipment for appropriate billing status Maintain productive utilization rate per company guidelines Perform inventory cycle counts per company guidelines Adhere to company dress code and safety regulations Meet or exceed on-site response time requirements for each customer Understand and comply with company startup/escalation processes and procedures Maintain proper and adequate level of internal communications QUALIFICATIONS Experience (one or more of the following) ASEET or AMEET, or progress towards, is preferred High School or Vocational School Diploma 2-4 years military experience in a related technical field 0-2 years of relevant industry experience Interpersonal and Administrative Skills Communicate professionally and respectfully in both written and verbal forms Manage time effectively by prioritizing and balancing technical tasks with administrative tasks Collaborative with peers, customers, suppliers, and leadership Complete administrative tasks (i.e. report writing, time entry, expense reporting, material debriefing, inventory counting, etc.) in a timely fashion Technical skills Make basic site evaluation skills to include: environmental temperature, and general operating conditions Familiarity with electrical / electronic test equipment and fundamentals Follow written technical documentation (i.e. procedures and product manuals) to perform service tasks Employ elementary fix/repair techniques based on directed supervision Complete service tasks and return unit to full operating conditions based upon directed supervision Summarize and report all work related tasks performed in written and verbal form Efficient with a personal computer and associated applications (Microsoft Office, Vertiv software, etc.) WORKING CONDITIONS: Travel is required Flexible schedules (weekends, evenings, and holidays) Valid driver's license Due to the safety sensitive aspect of the role, candidates are required to successfully pass a drug test prior to employment. In addition, you will also be required to complete and pass a pre-employment background check and a motor vehicle records check. PHYSICAL REQUIREMENTS: While performing duties of the above jobs, the associate is regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or other components; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear and smell. The associate frequently is required to sit and climb or balance. Specific vision abilities required by this job include close vision, distant vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to consistently lift up to 50 pounds and occasionally up to 75 pounds. Notes: Vertiv will make reasonable accommodations whenever necessary for all qualified employees or candidates with disabilities (as defined by applicable law), provided that (1) the individual is otherwise qualified to safely perform the essential functions of the job and (2) such accommodations due not impose an undue hardship. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

Our Inside Sales Engineer is supporting our High Voltage Maintenance business. HVM is an electrical engineering and testing company providing comprehensive testing, maintenance, and engineering services to a variety of industries including utilities, data centers, renewable energy, commercial and industrial industries. This position will report to the Area Sales Manager for covering HVM's Ohio Valley or Northeast territory and will provide sales and technical support for all the selling resources in that area. This role will assist in generating more business by following up on leads, assisting with proposals, performing joint sales calls with the area sales manager and/or local sales engineers, and supporting additional local technical sales and marketing efforts. RESPONSIBILITIES Provide support to our Operations and Outside Sales Engineers Make regular sales calls on existing accounts and establish contact with new accounts. Make effective customer presentations. Provide proposals or service contracts for HVM's services and repair work. Coordinate and schedule work with Service Center Manager and with customers. Promote sales through active participation in trade shows and professional societies. Work with Business Administrator to develop weekly invoicing and monthly status reports. QUALIFICATIONS Ability to read one-line electrical diagram/prints. Excellent communication skills, both written and verbal Excellent customer service, organizational, and analytical skills. Proficient in MS Office. Experience with CRM Management preferred. Valid Driver's License. EDUCATION AND CERTIFICATIONS Bachelors Engineering, Electrical or Mechanical Graduate of Electrical Technical School Military equivalent TRAVEL TIME REQUIRED 25% At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5.0 billion in revenue, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, O, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #HVM #LI-HR1

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift(s) Available: 2nd Compensation: $30.60-$41.80/h Sign-on Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information Shift Differential Weekly Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Troubleshoot mechanical and electrical issues independently Apply strong problem-solving and programming troubleshooting skills, preferably with Allen-Bradley Ensure reliability of manufacturing processes and compliance with standards Perform preventative and annual maintenance on equipment Safely operate hand tools, power tools, and electrical testing equipment Read and interpret mechanical, electrical, and control schematics Follow all safety procedures, including Lockout/Tagout (LOTO) Identify, plan, and execute follow-up maintenance work Prepare and maintain safe, organized work environments Respond to unplanned maintenance needs as directed Accurately complete and document work orders and maintenance records Communicate maintenance updates through written pass-downs Maintain and troubleshoot electronic controls and instrumentation Use diagnostic tools (e.g., oscilloscope, VOM) to test and repair systems Required Qualifications Electrical/Maintenance Journeyman License in the state of Michigan 3 years manufacturing maintenance experience Basic programming and advanced troubleshooting skills, preferably with Allen-Bradley High School or GED Equivalent Be able to troubleshoot PLCs and Ladder logic Be willing to be a part of the Hazmat team Strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, and wiring schematics Ability to work weekend and off shift hours as needed Preferred Qualifications Computer literacy and willingness to learn SAP/PPE systems Allen-Bradley programming and troubleshooting experience Maintenance experience in a food processing environment Proficient with test/calibration tools (RTD calibrators, multimeters, etc.) Ability to troubleshoot 480 VAC 3-phase, 120 VAC, and 24VDC circuits Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Pay Range: ($20 - $26) Target Bonus: 5.0% Location: Bettendorf Req ID: 27900 Position Summary Responsible for setting up and machining weldments, tubes, blocks, and pins of all sizes in a timely manner using 2-D drawings and programming an ACU-RITE controller, while maintaining exceptional quality. Job Responsibilities Set-up, program, and machine components per print efficiently and accurately Complete any necessary inspection worksheets Maintain little to no re-work or scrap Safely operate forklifts and overhead cranes Keep work area clean and organized Perform job-related duties as assigned per priority. Experience and Skills 1 - 3 years' experience as a machinist Prior experience setting up and operating manual mills preferred Basic PC navigation High attention to detail and quality Ability to read and interpret blue prints Understand basic GD&T call-outs Ability to accurately use standard machinist measuring tools Ability to setup and run “one-off” parts to print efficiently and accurately Must work well under pressure Excellent team player with organizational and time management skills Nonessential Skills and Experience Safety (OSHA, SDS), ANSI (RIA) standards. Environmental, Health and Safety Understand the Company's EH&S Policy and how it relates to this job; Be aware of OSHA & EPA laws and regulations as well as company rules and policies that pertain to this job; Work in a safe and environmentally friendly manner and observe all company EH&S procedures; Immediately notify the supervisor if there is any safety hazard, any equipment not operating correctly or if there are any questions regarding EH&S procedures; and Attend required EH&S training. Physical Demands and Work Environment The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is typically required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; see, talk and hear. Be able to climb ladders; lift hand tools up to 40 lbs. consistently, and parts up to 50 lbs. consistently. Repetition with activity. Work environment: The noise level in the work environment is usually moderate. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Bettendorf Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($21/hr - $31.25/hr) Target Bonus: 5.0% Req ID: 27686 Summary Lincoln Electric Automation is seeking a Quality Technician for our Bettendorf, IA location to perform in-process and final inspections, maintain quality standards, and support continuous improvement within a fast-paced automation environment. This role ensures that assemblies, weldments, and tooling meet engineering and customer requirements. In addition to competitive pay, Lincoln Electric offers an annual bonus program, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits! Responsibilities Perform in-process and final inspections on assemblies, weldments, and fabricated components. Maintain and calibrate inspection and measuring equipment. Identify and document nonconformities; assist in corrective actions. Work with engineering and fabrication teams to resolve quality issues. Provide feedback to improve workflow, documentation, and process efficiency. Complete inspection reports and quality documentation. Support assembly, fit-up, hydraulic line plumbing, and customer run-off. Assist with field start-up and customer training as needed (overnight travel required). Maintain a clean, safe, and organized work area. Required Education & Experience High school diploma or GED required; technical training preferred. Proficient in reading blueprints and GD&T. Strong attention to detail and organizational skills. Proficient with Microsoft Office (Excel, Word, PowerPoint). Experience with CMM systems (Leica, Faro Arm) and PolyWorks preferred. Knowledge of manufacturing equipment, inspection tools, and procedures. Ability to operate forklifts and overhead cranes safely. Effective communication and teamwork skills. Physical Demands and Work Environment The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is typically required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; see, talk and hear. Be able to climb ladders; lift hand tools up to 40 lbs. consistently, and parts up to 50 lbs. consistently. Repetition with activity. Specific vision abilities required by the job include close vision, distance vision, depth perception and the ability to adjust focus. Work environment: The noise level in the work environment is usually moderate. Shift: Full time, Monday-Friday (7am-3:30pm), overtime as needed. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Bettendorf Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($23 - $33) Target Bonus: 5.0% Req ID: 27343 Position Summary A Robotic Programmer works with the engineering and integration teams at Vizient by preparing automation systems to customer order specifications. This includes working with the customer on application or process development, programming structures and system functionality. Applications include, but are not limited to assembly, grinding, machine tending, material handling and welding. Job Responsibilities Take initiative to meet challenging project timelines and hour budgets; Take ownership of assigned tasks and projects to include commitment of travel for project success; Coordinate front-end reach reviews to ensure success of robotic application; Coordinate, implement and verify off-line programming efforts and online implementation of programming; Work with Controls Engineers and Application Engineers to ensure full functionality of the system; Assist in field start-up and customer training when necessary; Uphold company quality objectives and play an active role in reaching continuous improvement objectives; Installation and configuration of appropriate hardware and software options; Assist in the integration, start-up and debugging of plant floor equipment; Ability to improve cycle time and throughput by adjusting robot path or functions; Willingness to travel as required; and Perform miscellaneous job-related duties as assigned. Experience and Skills High attention to detail and quality; Ability to plan and execute daily and weekly scheduled tasks; Ability to keep work area clean and organized; Aptitude for providing directions to peers within the department; Excellent team player with organizational and time management skills; Safely operate fork trucks and overhead cranes; Ability to read and interpret weld symbols; Skill in the use of computers, specifically a PC, Windows-based operating environment; Ability to gather data, compile information and prepare reports; Ability to develop and deliver presentations; and Commitment to company values. Nonessential Skills and Experience Safety (OSHA, SDS), ANSI (RIA) standards; Microsoft Office Suite; Smartsheet Project Management Software; PTC Windchill with Creo, and Solidworks for viewing models; and Environmental, Health and Safety Understand the Company's EH&S Policy and how it relates to this job; Be aware of OSHA & EPA laws and regulations as well as company rules and policies that pertain to this job; Work in a safe and environmentally friendly manner and observe all company EH&S procedures; Immediately notify the supervisor if there is any safety hazard, any equipment not operating correctly or if there are any questions regarding EH&S procedures; and Attend required EH&S training. Physical Demands and Work Environment The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, the employee is typically required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; see, talk and hear. Be able to climb ladders; lift hand tools approx. 1-15 lbs. in weight to complete machine assembly, parts up to 50 lbs. Repetition with activity. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Work environment: The noise level in the work environment is usually low to moderate; temperature in the assembly area may fluctuate with the seasons as the production area is not air conditioned. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

At UniFirst, we're a global leader in uniform rental and facility service solutions for businesses across industries - from manufacturing and food processing to healthcare and hospitality. With a reputation for superior service and long-term customer partnerships, every uniform, product, and service we offer comes with integrity, commitment, and hard work. Come join a team that always delivers! Why Join Us? Sell essential, recession-resistant services Represent a trusted brand with high customer retention Be part of a supportive sales team that offers consistent 1:1 coaching, ongoing sales learning, and real growth opportunities Position Summary We're seeking a high-performing B2B Sales Representative to drive new business growth in an assigned territory. The ideal candidate thrives on prospecting, closing complex contracts, and building long-term relationships with business clients. Key Responsibilities Prospect and qualify leads across a defined territory through cold calling, networking, referrals, and in-person visits Conduct on-site assessments and presentations for uniform rental, floor care, restroom, and facility service programs Develop tailored proposals and close multi-year service agreements Maintain and update CRM with accurate client information and activity Meet or exceed monthly and quarterly sales quotas Collaborate with service and operations teams to ensure seamless customer onboarding Compensation & Benefits Competitive base salary + monthly uncapped commissions and quarterly bonuses Monthly car allowance and fuel card Medical, dental, vision, 401(k) with match Paid time off and holidays Career advancement opportunities into Sales management or National Accounts Qualifications What We're Looking For: 0-2+ years of B2B sales experience (uniform rental, industrial supply, waste management, safety gear, or janitorial services preferred) Proven track record of exceeding sales targets and managing a full sales cycle Strong negotiation and closing skills Self-motivated and goal-oriented Willingness to take coaching and feedback Valid driver's license, clean driving record, and a reliable vehicle Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Planning Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that can achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Comp: $85,000-100,000k/yr This is a Dayshift Position Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis, MDI and Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate “required to operate” and “required on roles” staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills Diversity & Inclusion: MCC fosters an inclusive culture that respects and embraces our teammates' diverse backgrounds and experiences, so that everyone can achieve their full potential here. We aspire for our company to truly reflect the diversity of our customers and the markets we serve. We are committed to equal opportunity for everyone, regardless of peoples' gender identity/expression, age, language, sexual orientation, ability, race, socioeconomic status, national origin or other characteristics. #LI-ML1 #appcast For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Our Team is Kind of a Big Deal! UniFirst First Aid + Safety is seeking a reliable and hardworking Safety Compliance Specialist to join our family. As a Team Partner in the Safety Training Department, you will be facilitating various CPR/First Aid & OSHA Safety classes to our client's locations. When working with UniFirst First Aid + Safety we provide a variety of shifts. Our standard is a 5-day work week, enjoy two days off a week. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you? Training: Our Team Partners receive ongoing cross-training, exposing them to different department areas. Cross training enhances performance and assists with career potential and advancement. Work Life Balance: We offer up to 40-hours a week! Career Growth: Some companies like to promote from within, we love to! Culture: Our family culture is what makes UniFirst First Aid + Safety an organization that stands out from the rest. Diversity: At UniFirst First Aid + Safety, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Provide various Safety Training classes to customers including, but not limited to; CPR/First Aid, Forklift Safety, Fire Extinguisher Safety. Drive company provided vehicle to and from customer locations daily. Contact customers by phone and email to schedule training. Contact customers and prospects by phone and email to sell Safety Training services and products. Clean and maintain all equipment including van and training equipment. Complete required reporting. Use iPad or other electronic devices to bill customers and complete training details. Meet with the training center manager to discuss goals, objectives, and outcomes. Work with internal resources to increase Safety Training base. Complete ongoing continuing education to increase Safety Training offerings and knowledge. Order supplies as needed. Provide ongoing support of customers to maintain OSHA compliance. Qualifications What we're looking for: High school and/or GED equivalent is required. Must be at least 18 years of age or older. Valid driver's license and safe driving record is required. Minimum of 2 years as a Safety Instructor providing CPR/First Aid, Forklift, Scissor Lift, Boom Lift, Fire Safety and other common OSHA classes is highly preferred. Current AHA certification to be an instructor in CPR/AED/First Aid and BLS. Credentialing as required by state law for course to be taught or administered is preferred. Experienced in sales and upselling additional safety-related products and services is preferred. Ability to communicate course material in a clear and understandable manner. Strong customer service skills. Ability to teach effectively in an adult learning environment. Ability to travel within the designated territory. Excellent communication skills for internal and external scheduling. Ability to lift up to 50 lbs at certain times. About UniFirst First Aid + Safety UniFirst First Aid + Safety is a division of the UniFirst Corporation. UniFirst First Aid + Safety is one of the largest providers of First Aid, AEDs, Compliance Training, Safety and PPE products in the United States. Businesses such as manufacturing, office buildings, retail, construction, logistics, automotive, and government agencies, are just a few examples of our current customer base. We are part of a $70 million division within a $1.8 billion company. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Pay Range: ($24.00/hr - $38.00/hr) Target Bonus: 5.0% Req ID: 27586 Summary Fori Automation, a Lincoln Electric company, is a global leader in designing and integrating automated assembly, welding, material handling, and testing systems. We deliver world-class automation solutions to leading manufacturers worldwide. We're seeking an experienced Mechanical Designer to join our Weld Systems team in Shelby Township, MI. In this role, you'll design and develop mechanical systems for automated welding equipment, ensuring precision, performance, and manufacturability. At Lincoln Electric, we invest in our people. In addition to competitive pay, we offer an annual bonus plan, tuition reimbursement, comprehensive medical/dental/vision benefits, 401(k) with company match, paid time off, and many other outstanding benefits. What You'll Do Develop mechanical concepts and detailed designs using 2D and 3D CAD tools. Focus design on tooling and fixture creation. Create accurate Bills of Materials (B.O.M.) and design documentation. Apply engineering calculations to verify design integrity (e.g., beam stress). Utilize standard designs, specifications, and part/vehicle data to build robust systems. Organize and maintain CAD files in accordance with company and project standards. Select appropriate materials and components for optimal performance and cost. Ensure all designs meet NAAMS standards and relevant industry standards for construction, safety, and ergonomics. Collaborate with cross-functional teams to deliver high-quality automation systems on time. Required Education & Experience Bachelor's degree in Mechanical Engineering preferred (or equivalent experience). 1+ year of design/layout experience (or 2+ years in a similar role without degree). Experience designing MIG and/or resistance weld machines preferred. Proficiency in 3D CAD (Inventor, SolidWorks, or similar) and 2D AutoCAD. Strong grasp of manufacturing principles, materials, and design best practices. Ability to perform basic engineering calculations and apply advanced algebra and design techniques. Team-oriented mindset with the ability to thrive in an ISO9001:2000 environment Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: $22.51-$29.00 Target Bonus: 5.0% Req ID: 26396 Job Responsibilities Take direction from Leader and/or Supervisor Provide training and assistance to new employees. Provide feedback on job status to Electric/Pneumatic Assembly Supervisor. Assist in start-up/de-bug of equipment. Assure good craftsmanship on jobs that are being built. Follow and enforce good housekeeping practices with all department personnel. Know and understand due dates for jobs and schedule work accordingly. Work with Controls Engineers to correct any problems with design of the machine/controls. Recommend as appropriate work methods and/or materials that will improve existing designs. Travel as needed to assist in installations, de-bug, tryout, or problem solving at customer locations. Follow-up with supervisor on daily basis to report progress of job(s) being worked on.. Recommend, initiate, or follow-up on engineering changes and document according to procedure(s). Assist in packing and loading of machines for shipment. Fill-in where required for absences. Order material and follow-up with Receiving when required. Must know how to read and interpret build prints. Job Requirements Education: High School Diploma required. Journeyman's card or Journeyman status preferred Experience: 5 years minimum experience as industrial pipefitter Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Shift: 2nd Shift | Full-Time Pay: $22.55 - $24.56 Help Us Deliver Quality - One Unit at a Time! Are you detail-oriented and enjoy hands-on work in a fast-paced environment? We're looking for a dependable Wrapper/Skidder to join our 2nd shift team. In this role, you'll play a key part in preparing our commercial air handling units for shipment-ensuring they're clean, secure, and ready to go! What You'll Do: Clean and prep units for wrapping or painting Place units on skids and secure them using shrink wrap, banding, and tape Ability to operate overhead cranes to move units and materials Coordinate with assembly, electrical, and shipping teams to prioritize tasks Apply rust preventative spray and prep units for paint as needed Use hand tools like heat guns, nail guns, and saws to complete packaging Follow all safety procedures and wear required PPE What You Bring: Requires a high school diploma/GED and previous experience in an industrial or manufacturing environment. Ability to follow written and verbal instructions Basic math skills (add, subtract, multiply, divide) Forklift license (or ability to obtain within 3 months) Strong attention to detail and a team-first attitude Why Join Us? Stable, full-time opportunity with room to grow Supportive team environment On-the-job training provided Safety-first culture Make a visible impact every day Be Part of Something Bigger If you're ready to roll up your sleeves and take pride in preparing high-quality products for delivery, we'd love to meet you. Apply now and start building your future with us! HIRING HOURLY RANGE: $22.55 - $24.56 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** #HourlyJobs

Shape the Future with Johnson Controls At Johnson Controls, we're redefining how buildings serve people and the planet. As a global leader in smart, healthy, and sustainable building solutions, we're looking for passionate individuals who want to make a real impact. Join a team that values your voice, supports your growth, and empowers your well-being through meaningful work and a collaborative culture. Now Hiring: Pipe Welder (TIG) - 2nd Shift Shift: Monday - Friday, 2:00 PM - 10:00 PM Training: 1st Shift (6:00 AM - 2:00 PM) for approximately 6 months HIRING HOURLY PAY $30.99. If a 2nd shift role add $1.50/hour shift Hourly rate determined by the CBA/rate sheet. Benefits are provided through a local labor union aligned with a collective bargaining agreement. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. . For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** About the Role Are you a skilled TIG welder with pipe welding experience? Join our growing team in Federalsburg and help build innovative, sustainable HVAC systems. You'll work in a supportive environment where your craftsmanship and attention to detail are valued-and where you'll have the opportunity to grow your skills and career. What You'll Do Perform TIG welding on carbon, galvanized, and stainless steel Weld, layout, cut, and fit parts to meet drawing tolerances Use plasma and oxygen cutting tools Regulate current, voltage, and select proper tips, rods, and sizes for each job Assemble complex standard products, including tubing layout and pipe bending Clean equipment using hand or power tools after welding What You Bring Required: High school diploma or GED Proven TIG welding experience Proven pipe welding experience Preferred: Completion of an accredited welding training program Why Join Johnson Controls? Competitive pay with shift premium Structured training and development opportunities Comprehensive benefits: medical, dental, vision, 401(k) with match, PTO, and more A global leader in smart, healthy, and sustainable buildings A supportive, empowering culture where your voice is heard Build Your Best Future with Johnson Controls We're reimagining the performance of buildings to serve people, places, and the planet. Join a team where your skills make a difference-and where your future is built on purpose. Apply Today - Let's Weld a Better Tomorrow #HourlyJobs

Responsibilities: Perform sales support to consistently meet overall area sales goals. Make regular sales calls on existing major accounts and establish contact with new accounts. Make effective customer presentations, proposal pricing is accurate and technically correct. This may include walk-through customer site, and field visits. Perform marketing support to promote the Company's image throughout the industry. Implement area-marketing plan on a monthly basis. Assist Corporate needs in new service assessments, marketing research and literature development. Perform public relations to promote sales. Active participation in trade shows and professional societies. Give effective presentations for the Company's Training Services and Speaker's Bureau. Member of the Area Management Committee. Actively participate as a committee member. Assist in the development of the area sales and marketing plan. Bring input and new ideas on Sales and Marketing activities. Competencies: To perform the job successfully, an individual should demonstrate the following competencies: Customer Focus- Is dedicated to meeting the expectations and requirements of internal and external customer; Gets first-hand customer information and uses it for improvements in products and services; Acts with customers in mind; Establishes and maintains effective relationships with customers and gains their trust and respect. Drive for Results- Can be counted on to exceed goals successfully; is constantly and consistently one of the top performers; very bottom line oriented; steadfastly pushes self and others for results. Interpersonal Savvy - Relates well to all kinds of people, up, down and sideways, inside and outside the organization; builds appropriate rapport; listens; builds constructive and effective relationships; uses diplomacy and tact; truly values people; can diffuse tension. Listening- Practices attentive and active listening; has the patience to hear people out; can accurately restate the opinions of others even when he/she disagrees. Negotiating- Can negotiate skillfully in tough situations with both internal and external groups; can settle differences with minimum noise; can win concessions without damaging relationships; can be both direct and forceful as well as diplomatic; gains trust quickly. Time Management- Uses his/her time effectively and efficiently; sets priorities; values time; separates the critical few from the trivial many and concentrates his/her efforts accordingly. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements: Regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or controls; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear, and smell. Frequently required to sit, climb, and balance. Specific vision abilities required by this job include close vision, distance vision, basic color differentiation and the ability to adjust focus. Regularly lift and/or move up to 25 pounds and frequently lift and/or move 100-pound test sets. Valid Driver's License. Education/Experience: Graduate engineer (BSEE/BSME) and no experience. OR Graduate of electrical technical school or equivalent, and five years of similar work. OR High school diploma or equivalent and eight years of similar work. Willing to work flexible hours, weekends, some overnight travel to cover sales territory. Regularly required to sit, stand, walk, use hands and fingers, talk and hear. Required to sit and work at computer. Specific vision abilities required by this job include close vision and the ability to adjust focus. Conduct walk-through of construction sites and work in and around electrical equipment. Valid Driver's License required. TRAVEL TIME REQUIRED Up to 75% within assigned territory Company provided vehicle The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $6.9 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #HVM #LI-HR1

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Req ID: 27949 Job Summary We are seeking an Industrial Controls Engineer specializing in system design for custom machinery projects. This role focuses on developing complete control system architectures, including hardware selection, electrical schematics, and network layouts. The ideal candidate will excel in creating robust designs that integrate seamlessly with mechanical systems and meet customer specifications. Key Responsibilities Develop complete control system architectures for custom machinery. Select hardware components and design electrical schematics. Create network layouts and ensure system scalability. Collaborate with mechanical engineers for integration. Prepare detailed wiring diagrams and panel layouts. Ensure compliance with NFPA, UL, and OSHA standards. Support installation and commissioning by providing design expertise. Coordinate with contractors during installation to ensure adherence to design. Complete required engineering documentation including DFMEA, Panel Heat Loads, Safety Risk Assessments, Motor Sizing Calculations. Qualifications Bachelor's degree in electrical engineering or related field. 5+ years of experience in industrial control system design. Proficiency in AutoCAD Electrical or similar tools. Knowledge of industrial networks (EtherNet/IP, Modbus). Strong understanding of safety standards and compliance requirements. Travel: 30% - 50% Preferred Skills Experience with UL panel design and CE compliance. Familiarity with motion control and robotics integration. Ability to manage multiple design projects simultaneously. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Employment Status: Salary Full-Time Function: Engineering Req ID: 27246 Summary Lincoln Electric is seeking a highly skilled Project Manager to support our Red Viking subsidiary based in Plymouth, MI. This role is responsible for leading complex, high-visibility projects that require significant resources, cross-functional collaboration, and seamless integration across teams. The Project Manager will drive initiatives from concept through final implementation, ensuring quality, budget, and schedule adherence while maintaining strong stakeholder alignment. At Lincoln Electric, we offer career growth potential along with a competitive compensation package, including bonus incentives, student loan repayment, tuition reimbursement, paid time off, paid holidays, a comprehensive benefits package (medical, dental, and vision), retirement plans, and much more. Key Responsibilities Lead projects through the full lifecycle: initiation, planning, execution, monitoring, control, and closure. Define project scope, objectives, deliverables, and success criteria while aligning team members to roles and responsibilities. Develop detailed project schedules, allocate resources, and manage risks to ensure timely and cost-effective completion. Coordinate cross-functional efforts with engineering, manufacturing, procurement, testing, quality, distributors, vendors, and end users. Ensure strict compliance with quality standards; review and approve final project deliverables. Provide regular updates to executive leadership and business unit leaders on project progress, risks, and outcomes. Manage and maintain financial tracking tools including Gross Margin, Operating Profit, Backlog, SG&A, and other key financials. Utilize advanced Excel skills to create and troubleshoot formulas, build reports, and support executive-level reporting. Leverage ERP systems for project tracking, reporting, and ensuring data integrity across business functions. Lead and mentor a team of project engineers, staff engineers, and manufacturing professionals to achieve technical and operational goals. Prepare clear documentation, presentations, and reports for both internal and external stakeholders Required Experience & Education Education: Bachelor's degree in Engineering, Technical Discipline, or Business Administration (with strong technical design and execution background). Experience: 7-10+ years of project management experience in a manufacturing environment. Proven background in advanced capital equipment design, build, and installation (scheduling, procurement, manufacturing, testing, and quality). PMP certification strongly preferred. Project Leadership: Demonstrated success managing scope, budgets, schedules, personnel, and materials within complex organizations. Technical Knowledge: ERP systems experience for project management and reporting. Proficiency with Excel (advanced formulas, financial tracking, reporting). Familiarity with ISO 9001, ISO 14001, ISO 17025, or equivalent standards. Soft Skills: Strong leadership, influence, and negotiation abilities. Excellent written, verbal, and presentation communication skills. High attention to detail and documentation accuracy. Other Requirements: Supervisory experience managing technical professionals. This person will work very closely with a team of project engineers, staff engineers, and manufacturing professionals on a daily basis. Willingness to travel up to 20%. U.S. Citizen or Permanent Resident (ITAR compliance required). Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Req ID: 26527 Summary Fori Automation, LLC, a Lincoln Electric Company, is a global supplier of welding, assembly, material handling, and testing equipment for automotive and non-automotive customers worldwide. Fori Automation focuses on delivering cost-effective, highly engineered products and systems designed and manufactured globally with localized sales, project management, and service. We are seeking an experienced Controls Software Engineer for our Shelby Township, MI site with a background in industrial software development. The Controls Software Engineer will initially support active projects and then transition to completing projects directly. They will take the lead on developing software on new projects and debug software on new machines. This role requires travel to customer sites for equipment installation and customer interaction. What You Will Do Design PLC software and HMIs for industrial automation equipment Debug and troubleshoot PLC software and HMIs Collaborate with cross-functional teams to maintain project timelines and critical path milestones. Maintain task lists and reports of open items. Maintain project design documentation and prepare customer deliverables. Ensure the controls engineering process is tracked and followed. Assist customers and local tradespeople in troubleshooting equipment issues. Conduct end-user training on equipment operation. Education & Experience Requirements Electrical Engineering or Computer Engineering degree preferred; Mechatronics degrees will also be considered. Minimum of two years of experience as a Controls Engineer or Controls Software Engineer with experience in designing Rockwell Logix 5000 or Siemens S7-1500 family processors. Knowledge or education in electrical circuits, schematic reading, design, and troubleshooting. Experience with electrical CAD systems, such as AutoCAD Electrical and/or ePLAN Experience with PLC programming in ladder and structured text. Experience programming HMIs Travel required: approximately 30% domestic and international. Weekend work may be required based on project schedules. Preferred Experience in computer programming languages, such as VB, C/C++, or C#. Experience with Rockwell and Siemens HMI preferred. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

CPM Holdings, Inc. is a diversified leading global supplier of process equipment and engineered technologies that sustainably feed, fuel, and build a better world. With its growing family of 17 market-leading product brands, CPM serves a variety of industries including animal feed, consumer food, green energy, advanced materials and sustainable packaging. Founded in 1883, CPM has 1,700 employees across 36 facilities on 4 continents with presence in 150+ countries. From the foods you eat to the fuels you require, CPM plays an important role in making the world more efficient and more sustainable. The CPM Industrial Solutions Division has a unique opportunity for a Hard-Face Welder in our manufacturing facility in Harlan IA. This is an opportunity to join a highly successful business with advancement opportunities. We are looking for a motivated detail-oriented person with strong welding aptitude attention to detail and the ability to work safely and productively with minimal supervision. This can be an entry level position. We will train motivated candidates that are willing to work hard, show up on time and can learn to work in a fast-paced dynamic environment. Monday thru Thursday/10 hours per day 1:00 PM-11:00 pm 40 hours per week Benefits/401Kplan Quarterly raises Paid holidays & PTO Qualifications & Skills: Must be able to lift 50 pounds Must be able to work independently with little supervision Welding experience preferred Ability to read and understand work instructions Forklift experience Attentive to detail Must be able to document piece count and complete simple quality measurements CPM Acquisition Corp. is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. CPM Acquisition Corp. offers competitive compensation and benefits, including paid holidays and vacations, 401k, medical/dental insurance, tuition assistance, and more.