Electrical Technician jobs at Cree - 702 jobs

Title: Electrical Technician Contract Reports to: Maintenance Manager Status: Non-Exempt Key Project Requirements: * Prior electrical maintenance experience in power generation or heavy industrial facilities. * Ability to troubleshoot, test, and repair systems up to 480V and above. * Proficiency with NFPA 70E safe work practices and electrical drawings/schematics. Job Summary: NAES is seeking an experienced Electrical Technician to support ongoing maintenance and reliability activities at a power generation facility in the Odessa, Texas area. This role is responsible for hands-on electrical troubleshooting, repair, and preventive maintenance, with a strong focus on motor circuits, heat tracing systems, and routine electrical inspections. The Electrical Technician will play a key role in ensuring safe, reliable, and efficient plant operations. Essential Duties and Responsibilities: * Troubleshoot, repair, and maintain plant electrical systems, including motor circuits, power distribution equipment, and associated control circuits. * Troubleshoot electrical faults and restore equipment to service safely and efficiently. * Utilize electrical diagnostic and testing equipment such as multimeters, insulation resistance testers (Megger), and related tools to identify faults and verify equipment condition. * Inspect, maintain, and repair wiring, control circuits, and power distribution systems. * Read and interpret technical documentation, including schematics, blueprints, and single-line diagrams. * Document maintenance activities, test results, and equipment conditions in CMMS. * Ensure compliance with all safety procedures, including lockout/tagout and NFPA 70E requirements. Job Requirements: * Proficiency Demonstrated experience troubleshooting and maintaining low- and medium-voltage electrical systems (up to 480V and above). * Strong hands-on electrical troubleshooting skills with motors, circuits, and auxiliary plant systems. * Proficiency using electrical test equipment, including multimeters and insulation resistance testers (Megger). * Working knowledge of preventive maintenance practices and equipment walkdowns in an industrial environment. * Strong attention to detail with effective written and verbal communication skills. * Familiarity with CMMS systems and basic computer applications (e.g., Microsoft Office). Education / Experience: * High School diploma or equivalent required; technical or trade school preferred. * 5+ years of electrical maintenance experience in power generation or heavy industrial environment. * Experience with GE 7F gas turbines preferred.

You will be the CNC Electrical Technician for the Electrical Controls Team. Our team is responsible for ensuring the reliability and performance of advanced automation equipment across production, research, and development environments. What You Will Be Doing As the CNC Electrical Technician you will be responsible for installing, modifying, and maintaining a wide variety of electrical and electronic systems that drive our CNC, PLC, robotics, and other automated machinery. Your responsibilities will include: * Install, modify, and repair CNC, PLC, and robotic control hardware and associated wiring according to schematics, service manuals, and performance specifications. * Perform preventative maintenance and detailed troubleshooting using calibrated laser, ball‑bar, and other precision test equipment. * Diagnose and resolve complex electrical issues with laptops, test instruments, and diagnostic software. * Mentor and train junior CNC Electrical Technicians (level B) as needed, and step in to perform their duties when required. * Maintain a clean, organized work area and promptly report any unusual conditions to the lead or supervisor. Why Join Us We are looking for a detail‑oriented, hands‑on professional who thrives in a fast‑paced, high‑tech environment and takes pride in delivering reliable, high‑quality solutions. In this role you will have direct impact on equipment uptime and will work with cutting‑edge automation technology that drives our mission‑critical operations. We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity This position is in Dallas. Discover more about our Dallas, Texas location. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. Basic Qualifications: * Proficient with electrical/electronic components of computer numeric control (CNC) equipment, programmable logic control (PLC) equipment and demonstrate a firm understanding and knowledge of the mechanical, hydraulic and pneumatic operations of the machines. * Demonstrate working knowledge of the National Electrical Code as it pertains to machine tools and associated equipment * Three (3) years working with CNC and PLC machines and components. Clearance Level: None Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: 4x10 hour day, 3 days off per week Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Hourly/Non-Exempt Business Unit: MISSILES AND FIRE CONTROL Relocation Available: No Career Area: Facilities Type: Full-Time Shift: First

You will be the CNC Electrical Technician for the Electrical Controls Team. Our team is responsible for ensuring the reliability and performance of advanced automation equipment across production, research, and development environments. What You Will Be Doing As the CNC Electrical Technician you will be responsible for installing, modifying, and maintaining a wide variety of electrical and electronic systems that drive our CNC, PLC, robotics, and other automated machinery. Your responsibilities will include: Install, modify, and repair CNC, PLC, and robotic control hardware and associated wiring according to schematics, service manuals, and performance specifications. Perform preventative maintenance and detailed troubleshooting using calibrated laser, ball‑bar, and other precision test equipment. Diagnose and resolve complex electrical issues with laptops, test instruments, and diagnostic software. Mentor and train junior CNC Electrical Technicians (level B) as needed, and step in to perform their duties when required. Maintain a clean, organized work area and promptly report any unusual conditions to the lead or supervisor. Why Join Us We are looking for a detail‑oriented, hands‑on professional who thrives in a fast‑paced, high‑tech environment and takes pride in delivering reliable, high‑quality solutions. In this role you will have direct impact on equipment uptime and will work with cutting‑edge automation technology that drives our mission‑critical operations. We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options. Learn more about Lockheed Martin's comprehensive benefits package here. Further Information About This Opportunity This position is in Dallas. Discover more about our Dallas, Texas location. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. Basic Qualifications - Proficient with electrical/electronic components of computer numeric control (CNC) equipment, programmable logic control (PLC) equipment and demonstrate a firm understanding and knowledge of the mechanical, hydraulic and pneumatic operations of the machines. - Demonstrate working knowledge of the National Electrical Code as it pertains to machine tools and associated equipment - Three (3) years working with CNC and PLC machines and components. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. * At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Other Important Information By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to work remotely Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedule Information Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.

You will be the CNC Electrical Technician for the Electrical Controls Team\. Our team is responsible for ensuring the reliability and performance of advanced automation equipment across production, research, and development environments\. **What You Will Be Doing** As the CNC Electrical Technician you will be responsible for installing, modifying, and maintaining a wide variety of electrical and electronic systems that drive our CNC, PLC, robotics, and other automated machinery\. Your responsibilities will include: + Install, modify, and repair CNC, PLC, and robotic control hardware and associated wiring according to schematics, service manuals, and performance specifications\. + Perform preventative maintenance and detailed troubleshooting using calibrated laser, ball‑bar, and other precision test equipment\. + Diagnose and resolve complex electrical issues with laptops, test instruments, and diagnostic software\. + Mentor and train junior CNC Electrical Technicians \(level B\) as needed, and step in to perform their duties when required\. + Maintain a clean, organized work area and promptly report any unusual conditions to the lead or supervisor\. **Why Join Us** We are looking for a detail‑oriented, hands‑on professional who thrives in a fast‑paced, high‑tech environment and takes pride in delivering reliable, high‑quality solutions\. In this role you will have direct impact on equipment uptime and will work with cutting‑edge automation technology that drives our mission‑critical operations\. We are committed to supporting your work‑life balance and overall well‑being, offering flexible scheduling options\. Learn more about Lockheed Martin's comprehensive benefits package here \(************************************************* \. **Further Information About This Opportunity** This position is in Dallas\. Discover more about our Dallas, Texas location\. \(********************************************* MUST BE A U\.S\. CITIZEN \- This position is located at a facility that requires special access\. **Basic Qualifications:** \- Proficient with electrical/electronic components of computer numeric control \(CNC\) equipment, programmable logic control \(PLC\) equipment and demonstrate a firm understanding and knowledge of the mechanical, hydraulic and pneumatic operations of the machines\. \- Demonstrate working knowledge of the National Electrical Code as it pertains to machine tools and associated equipment \- Three \(3\) years working with CNC and PLC machines and components\. **Clearance Level:** None **Other Important Information You Should Know** **Expression of Interest:** By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match\. Should this match be identified you may be contacted for this and future openings\. **Ability to Work Remotely:** Onsite Full\-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility\. **Work Schedules:** Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees\. Schedules range from standard 40 hours over a five day work week while others may be condensed\. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits\. **Schedule for this Position:** 4x10 hour day, 3 days off per week **Lockheed Martin is an equal opportunity employer\. Qualified candidates will be considered without regard to legally protected characteristics\.** **The application window will close in 90 days; applicants are encouraged to apply within 5 \- 30 days of the requisition posting date in order to receive optimal consideration\.** At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges\. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work\. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility\. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work\. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility\. If this sounds like a culture you connect with, you're invited to apply for this role\. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs , and apply for roles that align with your qualifications\. **Experience Level:** Hourly/Non\-Exempt **Business Unit:** MISSILES AND FIRE CONTROL **Relocation Available:** No **Career Area:** Facilities **Type:** Full\-Time **Shift:** First

Job Description CTG's long-standing Fortune 500 client of over 15 years has a W2 contract assignment for an Electrical Technician III. Type: Contract Job Title: Electrical Technician III Candidates must be able to commute and work onsite in Wilmington, NC Pay Rate: Based on experience Work Hours: Monday-Friday, 8:00 AM - 5:00 PM Education: Associate's or Bachelor's degree in Electrical Engineering Technology or related field Summary Provide hands-on electrical support for installation, modification, startup, and troubleshooting of production and automation equipment. Support construction, installation, debug, and commissioning activities through turnover to operations. Spend the majority of time on the manufacturing floor working directly with equipment. Supervise and direct internal maintenance teams and external contractors during equipment installation, conversion, testing, and debugging. Requirements Knowledge of industrial power systems up to and including 480VAC. Ability to interpret electrical drawings and schematics for troubleshooting and system validation. Translate engineering solutions into functional equipment and process requirements. Collaborate effectively with IT, Mechanical, and Process Engineering teams. Hands-on experience using standard tools, instruments, and measurement devices. Ability to manage multiple priorities in a fast-paced, team-based environment. Strong focus on job site safety, communication, and results-driven execution. Education AAS in Electrical Engineering Technology, BS in Electrical Engineering Technology, BS in Electrical Engineering, or similar. (Equivalent experience may be considered in rare circumstances.) Experience 3+ years of manufacturing experience supporting process and automation equipment. Additional Information No third-party resumes will be accepted. Drug testing and/or other employment-related inquiries may be conducted. CTG will consider qualified applicants with criminal histories consistent with applicable laws. Must be able to work on a W2 tax basis (no C2C or third-party vendors). CTG is an Equal Employment Opportunity employer. CTG is an E-Verify Company. To be considered for this opportunity, please apply directly through our website or email your Word version resume and salary expectations to ********************.

IMI plc We are a global specialist engineering company that creates breakthrough solutions. We are curious and like to solve problems, partnering with our customers to solve the demands of today and prepare for the challenges of tomorrow. We embrace innovation and care about outcomes that are good for business, everyday life and making a better world - creating lasting impact for everyone. We design, build and service highly engineered products in fluid and motion control applications. We focus on five market sectors: Industrial Automation, Process Automation, Climate Control, Life Science, and Transport. Our partnership approach breaks through problems and reduces complexity. We don't invent in isolation - we collaborate with our customers. We listen closely and we think differently, creating space for diverse minds to innovate. We are working together to make businesses safer, more sustainable and more productive. Role Overview: We are seeking a highly skilled and adaptable Field Service Engineer to join our team, specializing in industrial automation systems. The ideal candidate will be responsible for commissioning, troubleshooting, and maintaining electro-hydraulic control systems across global industrial sites. Location: Houston (frequent travel required across the country, with some international assignments) Travel Commitment: Approx. 210 days/year, with average assignments of 30 days per site Training: Up to 2-3 months of global training required Key Responsibilities: Perform on-site service activities including installation, commissioning, and maintenance of control systems. Interpret and work with electrical, hydraulic, and P&ID schematics. Diagnose and resolve faults in PLC-controlled electro-hydraulic systems, control cabinets, and process loops. Configure and troubleshoot industrial communication networks including Modbus, and Ethernet. Program and modify PLC and HMI systems, primarily using Rockwell and Siemens platforms. Collaborate with engineering teams to ensure system integrity and performance. Maintain detailed service reports and documentation. Coordinate teams of technicians performing maintenance on electrohydraulic systems. Maintain daily communications with customers, ensuring timely execution of assignments. Track daily costs and billable hours. Provide troubleshooting support to customers. Ensure safe execution of activities, including coordinating lock-out/tag-out procedures, conducting Job Hazard Analysis. QUALIFICATIONS: Perform on-site service activities including installation, commissioning, and maintenance of control systems. Interpret and work with electrical, hydraulic, and P&ID schematics. Diagnose and resolve faults in PLC-controlled electro-hydraulic systems, control cabinets, and process loops. Configure and troubleshoot industrial communication networks including Modbus, and Ethernet. Program and modify PLC and HMI systems, primarily using Rockwell and Siemens platforms. Collaborate with engineering teams to ensure system integrity and performance. Maintain detailed service reports and documentation. Coordinate teams of technicians performing maintenance on electrohydraulic systems. Maintain daily communications with customers, ensuring timely execution of assignments. Track daily costs and billable hours. Provide troubleshooting support to customers. Ensure safe execution of activities, including coordinating lock-out/tag-out procedures, conducting Job Hazard Analysis. REQUIREMENTS: Electrical Engineering, Mechanical Engineering, or related field. A bachelor's degree is a plus, but candidates with substantial relevant experience are encouraged to apply. Willingness to travel nationally and internationally for extended periods (average 30 days per trip). Willingness to support customers during emergencies (customer's plants are critical and operate on a 24/7 basis. Strong understanding of electrical and hydraulic schematics, and P&ID diagrams. Hands-on experience with industrial hydraulic systems. Hands-on experience with industrial communication protocols. Proven ability to troubleshoot complex control systems. Proficiency in PLC/HMI programming (Rockwell, Siemens). Good stress management and problem-solving skills. Fluent in English (spoken and written). Candidate must be physically fit and capable of: Climbing several flights of stairs Climbing ladders Working at heights Lifting light weights (tools and components) Ability to work in industrial environments and comply with all safety standards. Must successfully pass background checks and drug screening prior to employment. Refinery Access: Must be able to obtain and maintain a valid TWIC (Transportation Worker Identification Credential) to access refinery and port facilities. Passport Required: Must hold (or be able to obtain) a valid passport for international travel assignments. Drug & Alcohol Compliance: Candidates must be able to participate in extensive and ongoing random drug testing required by refinery sites. Testing methods may include oral swab, urinalysis, and hair follicle testing in accordance with customer and regulatory standards. Pay range: $100,000 - $120,000 Within this range, individual pay is determined based on skills, experience, and qualifications relative to the job requirements. Base pay information is aligned with market location and may be subject to prevailing wage laws, if applicable. What IMI Can Offer You At IMI, one of our top priorities is to create an inclusive culture of health. We strive to remove barriers to care (whether that be physical or financial) and in doing so, we offer choice for all your health and wellbeing needs. See below for a general overview of our amazing perks and benefits: Multiple health plans to choose from: HMO, PPO, and High Deductible Health Plans with a low-cost share Best-in-class 401K plan with zero vesting and up to 6% contribution matching 14-week maternity leave at full pay (Adoption benefits are equivalent) 4-week paternity leave at full pay (Adoption benefits are equivalent) Employee Resource Groups that offer community and support, like our Pride Network and Network of Women groups PTO, encompassing inclusive holidays Career Development opportunities (IMI's ‘Catalyst' Program) Employer contribution for Health Savings Account, and in many cases free virtual telemedicine, and teletherapy. Mental Health and wellness programs to support you and your family Full suite of voluntary benefits to tap into, including but not limited to: Critical illness insurance, hospital indemnity, legal insurance, identity theft protection, and pet insurance or home & auto insurance through our discount advantage platform Short & long-term disability as well as basic life insurance at 2x your basic salary at no cost to the employee Free financial advisors, webinars, and classes through Charles Schwab Annual Employee Stock Purchase Plan with option to purchase IMI shares at a reduced employee only price - no opportunity to lose, only to profit or refund your investment 100% **Benefits plans change year over year, but we have guiding principles in place to ensure our employees have the tools and resources available to stay connected and up to date** Health & Safety The physical demands described within the Key Duties & Responsibilities section of this are required to perform the essential functions of this position. Reasonable accommodations may be made for individuals with disabilities. Please contact your local HR representative to discuss the specific Work Conditions and Physical Requirements of this role. Health, Safety, and Environmental Duties - At IMI we are all personally committed to protecting our people, minimizing our impact to the environment, the communities we operate in and our company. All members of our workforce have the duty to ensure the health, safety and welfare of themselves, others, and the environment. Every employee is expected to follow all HSE operating procedures, also to challenge any observed behaviors or unsafe acts. Code of Ethics IMI requires the highest standard of ethics in all business dealings, particularly with customers, suppliers, advisors, employees, and the authorities. In accordance with the IMI Way: Our Code of Responsible Business. Changes to This IMI may amend this job description in whole or part at any time. IMI is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, or veteran status. #LI-KR1

$3,500 Sign On Bonus! WIN Waste Innovations is looking for an Electrical and Instrumentation Technician who is skilled, detail oriented, and self-motivated individual. The basic function of the E&I Technician is to install, troubleshoot, clean, inspect, calibrate, and maintain electrical, instrumentation, and distributive control equipment throughout the facility in a safe and professional manner. Responsibilities: Assists with monitoring and maintaining facility equipment (with supervision) to ensure safe and efficient equipment and facility operation. Performs electrical preventive and repair maintenance procedures safely and professionally with adequate supervision in accordance with Federal and State Regulations, and Company Work Rules, Policies and Procedures. Initiates and completes work-orders and requisitions and documents all critical and or pertinent information on a routine basis by direction and with supervision/training. Responds and reports to work during off hours when emergency repairs are required with direct/remote assistance and/or supervision. Travels to other facilities with-in the Company when technical support is required. Takes proactive measures to address improvement opportunities. Performs lesser skilled duties when required or requested. Completes the Corporate and Plant Training Programs within the time frame prescribed. Identifies and effectively uses basic and precision measuring tools to calculate and determine lengths, surface areas, and volumes as necessary while performing maintenance tasks on a routine basis. Follows standard safety procedures, correct safety and environmental hazards, and report them to the Shift Supervisor immediately. Reads, understands, and applies information such as, lockout/tagout procedures, safety rules, job hazard analyses, operating and maintenance instructions, and procedure manuals. Works overtime. Works rotating shifts during outages or if requested. Communicates clearly and concisely both verbally and in writing; as well as communicate clearly whether using in-situ intercom system, two-way radio or face to face. Anticipates typical problems, identify potential or recurring problems, and take appropriate action with supervision/training. Troubleshoots equipment, diagnose problems and repair with supervision/training. Operates other equipment including, but not limited to, industrial forklifts, manlifts, skid steer type loaders, and other mobile equipment. Maintain positive work environment by acting and communicating in a manner so that you get along with customers, clients, vendors, co-workers and management. Qualifications: High school diploma or general education degree (GED) or equivalent. Licensed Journeyman Electrician or minimum of 2 years' experience in the Electrical Field. Instrumentation experience not required. Licenses required as necessary to comply with State, Environmental, and/or Federal regulatory agencies or if Electrician, licensed as necessary by State, Environmental, and/or Federal regulatory agencies. Work Environment: Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Noise in work environment Physical Demand: Stand Sit for prolonged periods of time Walk Handle tools, equipment, fine motor skills Reach with hands and arms Climb and walk on heights often greater than 4 feet Stoop, kneel, bend, push, pull, crawl Ascend and descend stairs and stationary vertical ladders as part of normal work activity and emergency egress situations Lift 50 lbs. Move about all areas of the plant, including catwalks, deck grating, and uneven surfaces Close vision, distance vision, peripheral vision, depth perception, corrected or otherwise Operate a 1.5-inch fire hose operating at 125 psi line pressure to the extent required to extinguish fire Operate fire extinguishing equipment ranging from handheld extinguishers to 200 lb portable units Access confined spaces and pressure vessels through standard 12" by 16" manways PPE Required: Work in areas under adverse conditions that may require the donning and use of personal protective equipment including, but not limited to, the following with average fatigue: Negative pressure respirator Positive pressure respirator Self-contained breathing apparatus (steel or composite bottle) Hardhat Approved safety shoes Eye protection Rubber suit and gloves Chemical resistant suit Heat resistant outerwear Flame resistant outerwear Approved hearing protection Gloves Safety harness Direct Reports: This job has no supervisory duties. What You'll Enjoy: Industry leading benefits Multiple and flexible medical plans Outstanding PTO program Floating Holidays Strong 401k program and company match Tuition reimbursement plan College loan reimbursement College scholarship program for dependents Parental Leave Program Inclusive culture Employee engagement events Employee resource groups WIN Waste Innovations is a waste management company committed to delivering essential waste management solutions to customers and communities supported by our team of 2,300 employees. We believe in preserving our environment for future generations while providing for today's needs. WIN Waste Innovations is a vertically integrated business with a platform of 50 strategically located collection, transfer, and disposal assets. These include waste-to-energy facilities, transfer stations, ash monofills, landfills, and fleets of rail cars and collection vehicles. We process more than 11 million tons of waste annually, converting 6.7 million tons of waste into clean, renewable energy that powers 340,000 homes. We recycle more than 234,000 tons of plastic, paper, and metals from the waste stream. At WIN Waste Innovations, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short-Term Disability. As well as Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled.

As a 100% Employee-Owned company, Robert E. Mason & Associates, Inc. believes our Associates are the foundation of both our customers' and our success. Our strong company culture, and belief in continued investment in our Associates, has helped us realize long Associate tenures, as well as long lasting relationships with our customers. Under the Robert E. Mason & Associates, Inc. umbrella there are two divisions: R.E. Mason and Apperture Solutions. R.E. Mason is an Emerson Impact Partner covering North Carolina, South Carolina, and Virginia. Emerson is the global leader of process systems and solutions. R.E. Mason provides industry-leading process equipment and service for process control, automation, safety, and reliability. The industries served include Chemical, Pharmaceutical & Life Sciences, Power & Utilities, Food & Beverage, and Pulp & Paper. Apperture Solutions is a technology independent, professional consulting, and implementation services firm. Apperture Solutions offers Data Enablement, Production Optimization, Operations Management, and Other Value-Added Services. Apperture Solutions partners with other providers to offer our customers the technologies and solutions that fit their needs. What R.E. Mason Offers Associates: R.E. Mason is a 100% employee-owned company that offers a comprehensive, industry leading benefits package to all eligible Associates: Participation in the Employee Stock Ownership Program (ESOP) Retirement plan, including a Safe Harbor contribution Medical / Dental / Vision Insurance Employer paid Life Insurance and Long-Term Disability Insurance Generous paid leave options that include vacation time, sick leave, personal leave time, R.E. Mason Way Half Day, paid Jury Duty, and paid Bereavement Leave Paid Parental Leave Paid company holidays Career Development Program Retirement and Financial Wellness program Employee Assistance Program (EAP) Alternative/Hybrid Work Schedules General Description Electric Actuation Technicians are responsible for the assembly, calibration, diagnostics and repair of all types of electric actuators (MOV's). Associated work often includes the service/repair of associated control, isolation, regulator/relief valves, including valve instrumentation. Specific Responsibilities Assist in the assembly, commissioning, troubleshooting and repair of electric actuators in the shop or at customer facilities Determine service requirements for electrical and mechanical components by use of technical drawings and various types of measuring equipment Preventive Maintenance and repair of electric actuators from brands such as Bettis, Limitorque, Rotork, Beck, and Auma. Assist in the design of the bracket and coupling interface between electric actuators and valves Customer communication - technical assistance, troubleshooting, determining disposition of repairs Adherence to all safety, quality and company rules/regulations Maintain excellent housekeeping standards Participation and involvement in Safety, Quality, and Activities Committees. Complete site-specific safety requirements Maintain driver eligibility Perform other duties as assigned Qualifications Required Competencies Strong Electrical Ability/Aptitude Strong Safety Culture Process Control communication protocols including HART, Foundation Fieldbus, PROFIBUS and Modbus. Familiar with Control System Rack Rooms, termination panels, and wiring associated with electric actuator installations Problem Solving and Troubleshooting Mechanical Ability/Aptitude Knowledge of rigging and lifting Able to operate repair equipment namely: overhead cranes, forklifts, sand blasters, power tools and electrical devices such as multi meters, HART Communicators Ability to stay task focused Self-Starter and Self-Directed Available for overnight travel up to 4 weeks (supporting nuclear refueling outages) with an overall field to shop ratio of 70%. Must be able to work off hours, weekends, and OT on a short notice basis based on business needs Able to work in abnormal (heat/cold/clean room) operating conditions. Excellent communication (verbal & written), interpersonal and customer relations skills - exhibit an ability to effectively communicate with plant personnel. Time Management Skills Teamwork Required Education and Experience High School Diploma or equivalent Technical/Trade School preferred 2 years Industrial plant experience preferred Valve repair experience Basic computer skills Physical Requirements Standing - long periods of time Walking - long periods of time Sitting Kneeling - long periods of time Reaching Overhead Climbing Pushing and Pulling Use of hand tools and power tools Lifting - 50 Pounds Driving RE Mason Company is a federal contractor and, as such, is required to solicit the disability status and protected veteran status of candidates. Thus, you are required to answer self-identification questions as part of your application process. These questions are part of RE Mason's Affirmative Action Plan and the completion of these questions will not have any effect on any consideration of your application materials. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and need to request an accommodation in order to apply for a position with RE Mason, please call our office at **************. This is a drug-free workplace. Employment is contingent upon the successful completion of any required pre-employment and, if applicable, ongoing drug testing, including testing mandated by customer site access requirements.

Doctor Electric, a premier electrical services provider in Chili, NY, is seeking a skilled and dedicated full-time Electrical Technician to join our team. WHAT YOU GET: PAY & BENEFITS This electrician position offers a competitive salary range of $60,000+ per year, plus performance bonuses. Our fantastic benefits package includes: Health insurance Company contributions to HSA Company-matched IRA Paid life insurance Paid accident and disability Paid holidays PTO Paid training and continuing education Weekly bonus pay ELECTRICAL TECHNICIAN: YOUR ROLE As an Electrical Technician, you will start your day with a team meeting to review service calls and assignments. You will then travel to various residential and commercial locations to diagnose issues, present options and pricing to clients, and perform independent repairs and installations. Throughout the day, you will oversee service calls, ensuring that each task meets our high standards of quality and efficiency. WHAT WE NEED FROM YOU 3+ years of experience as an electrician A clean driving record The ability to work with and direct a helper Strong verbal communication skills A willingness to learn, be responsible, and take initiative YOUR HOURS AS AN ELECTRICAL TECHNICIAN This full-time position operates on a Monday to Friday schedule, from 8:00 AM to 4:30 PM, with occasional overtime that may include evenings and weekends. This schedule ensures a balanced work-life routine while providing opportunities for additional earnings. LEARN ABOUT US: DOCTOR ELECTRIC Founded in 2010, we pride ourselves on our customer-focused approach to electrical service. Our goal is to provide exceptional service to homeowners in the greater Rochester, NY area. We recognize that earning a homeowner's trust requires more than just electrical expertise, which is why we prioritize building strong relationships with our clients. Our team is dedicated to continuous learning and growth. We provide training and education, ensuring that our electricians are equipped with the latest knowledge and skills in their field. Working at Doctor Electric offers a dynamic work environment where no two days are the same! If you are ready to advance your career with a company that values your expertise, we encourage you to apply. Our initial application process is quick and easy, taking less than 3 minutes to complete and is mobile-friendly. Join Doctor Electric and become a vital part of our dedicated team. We look forward to hearing from you!

Job Description Doctor Electric, a premier electrical services provider in Chili, NY, is seeking a skilled and dedicated full-time Electrical Technician to join our team. WHAT YOU GET: PAY & BENEFITS This electrician position offers a competitive salary range of $60,000+ per year, plus performance bonuses. Our fantastic benefits package includes: Health insurance Company contributions to HSA Company-matched IRA Paid life insurance Paid accident and disability Paid holidays PTO Paid training and continuing education Weekly bonus pay ELECTRICAL TECHNICIAN: YOUR ROLE As an Electrical Technician, you will start your day with a team meeting to review service calls and assignments. You will then travel to various residential and commercial locations to diagnose issues, present options and pricing to clients, and perform independent repairs and installations. Throughout the day, you will oversee service calls, ensuring that each task meets our high standards of quality and efficiency. WHAT WE NEED FROM YOU 3+ years of experience as an electrician A clean driving record The ability to work with and direct a helper Strong verbal communication skills A willingness to learn, be responsible, and take initiative YOUR HOURS AS AN ELECTRICAL TECHNICIAN This full-time position operates on a Monday to Friday schedule, from 8:00 AM to 4:30 PM, with occasional overtime that may include evenings and weekends. This schedule ensures a balanced work-life routine while providing opportunities for additional earnings. LEARN ABOUT US: DOCTOR ELECTRIC Founded in 2010, we pride ourselves on our customer-focused approach to electrical service. Our goal is to provide exceptional service to homeowners in the greater Rochester, NY area. We recognize that earning a homeowner's trust requires more than just electrical expertise, which is why we prioritize building strong relationships with our clients. Our team is dedicated to continuous learning and growth. We provide training and education, ensuring that our electricians are equipped with the latest knowledge and skills in their field. Working at Doctor Electric offers a dynamic work environment where no two days are the same! If you are ready to advance your career with a company that values your expertise, we encourage you to apply. Our initial application process is quick and easy, taking less than 3 minutes to complete and is mobile-friendly. Join Doctor Electric and become a vital part of our dedicated team. We look forward to hearing from you!

Title: Electrical Control Technician Electrical Control Technician This role will be located at an OCONUS location and 100% onsite Who We Are KBR Mission Technology Solutions delivers full life cycle professional and technical solutions that improve operational readiness and drive innovation. We help ensure mission success on land, air, sea, space and cyberspace for the Department of Defense, Intelligence Community, NASA and other federal agencies. KBR's areas of expertise include engineering, logistics, operations, science, program management, mission IT and cybersecurity. KBR strives to create a safer, more secure and sustainable world by bringing together the best and brightest to deliver technologies and solutions that help our customers accomplish their most critical missions and objectives. The Mission Ahead This role is within KBR/NSS Intel division. At KBR Government Solutions, we don't just envision a world that's safer, more secure, and sustainable - we create it. Our legacy of delivering advanced full life cycle professional and technical solutions is matched only by our commitment to operational readiness and innovation. As stewards of critical missions for the Department of Defense, Intelligence Community, NASA, and other key federal entities, we excel in engineering, logistics, operations, science, program management, mission IT, and cybersecurity. United in our quest for excellence, KBR stands at the vanguard, ready to transform possibilities into impactful realities for a better tomorrow. Who YOU Are You're an experienced and results-driven Electrical Control Technician with a proven track record in overseeing the daily operations, maintenance, and repair of complex systems and facilities. With a deep understanding of mechanical, electrical, and operational systems, you excel at leading teams to ensure optimal performance, safety, and compliance. Your strong leadership, problem-solving skills, and ability to manage multiple projects make you a key driver of operational efficiency and success. At KBR, you bring expertise in operations management, a commitment to safety and quality, and the ability to lead cross-functional teams. Known for your ability to implement effective maintenance schedules, troubleshoot system issues, and ensure regulatory compliance, you play a vital role in maintaining operational continuity and excellence. Your dedication to continuous improvement and operational effectiveness aligns with KBR's mission of delivering innovative and reliable solutions to support critical missions. What You'll Do In the role of Electrical Control Technician, your duties will include: Maintenance, replacement, or repair any of a variety of electrical equipment such as generators, transformers, switchboards, controllers, circuit breakers, motors, heating units, conduit systems, or other transmission equipment. Working from schematics, blueprints, drawings, layouts, or other specifications Locating and diagnosing trouble in the electrical system, mechanical control systems or equipment Working standard computations relating to load requirements of wiring or electrical equipment, Using a variety of electrician hand tools and measuring and testing instruments. Comply with all key work processes required by the company (and customer) and document any deficiencies while overseeing customer systems to ensure no impact to their daily mission Participate in job specific training, presentations, modules, qualification tests require to perform work and qualify for job skills and corporate policies & procedures Perform various switching/isolation procedures to mitigate any unexpected operational issues or to prepare systems for maintenance activities by vendors or in-house O&M personnel Provide timely assistance to plant operators and/or other O&M personnel when required Maintain compliance with all applicable policies, procedures, and global standards Plan, organize, and carry out assignments as directed; tasks range from effective use of building controls systems, discussion of system operations with Building Operators, preventative maintenance tasks to organization of a maintenance switching event for major equipment shutdown/isolation all to prevent impact to customer's mission Position consists of a standard day-time work week coverage, Mon - Fri; flexible schedule is possible. Position requires on-call availability for after-hours emergencies at the 24/7 facility; primary response is performed by the Operations division, but this position might be required to report to assist. Other duties as assigned This is a contingent position based upon contract award and will be located OCONUS Requirements: Must possess an Active Secret security clearance with the ability to obtain a US TS/SCI w/ Poly level clearance High school Diploma (or equivalent GED) Technical or Trade School Graduate or equivalent apprenticeship for the mechanical trades. Five (5) years of experience in maintenance and repair of pneumatic and electronic controls. Thorough working knowledge of AC/DC Electronic theory and solid-state electronics, DDC controls, and computer operations. Familiar with Honeywell, Powers, and Carrier Building Management Systems or similar systems. Willingness to work rotational shift if necessary, including days, evenings, and nights as well as overtime, weekends and holidays as required. Belong, Connect and Grow at KBR At KBR, we are passionate about our people and our Zero Harm culture. These inform all that we do and are at the heart of our commitment to, and ongoing journey toward being a People First company. That commitment is central to our team of team's philosophy and fosters an environment where everyone can Belong, Connect and Grow. We Deliver - Together. KBR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

Job Description Machine Specialties, Inc. (MSI) is a leading contract machining and metal finishing specialist that designs and manufactures sophisticated, cost-effective solutions to meet our clients' most demanding challenges. Our company located in Whitsett, NC, is about 8 miles outside of Greensboro, NC. We are currently seeking a highly skilled Industrial Electrical Technician to join our Maintenance Team and service the mechanical operations throughout our facility. You will respond to requests for electrical repairs and breakdowns as well as perform routine maintenance and upgrade equipment as necessary. Candidates must know how to troubleshoot programmable logic controllers (PLCs) and make adjustments or repairs if they are not working properly. The ideal candidate will be a background in CNC Machining and electrical knowledge around it. Duties and Responsibilities: Respond quickly to all service requests and efficiently troubleshoot and repair electrical systems Communicate estimated timelines for repairs to those impacted Conduct tests and assessments of new systems and repairs to ensure quality Assemble and install electrical panels, wire harnesses, and other electrical equipment Install new equipment and wiring to expand infrastructure as needed Perform preventative maintenance on a regular schedule Utilize and store all equipment properly Requirements and Qualifications: High school diploma or equivalent; associate degree in electrical engineering technology preferred Valid electrician license in good standing 3+ years of experience working as an electrical technician Extensive knowledge of electrical systems, wiring, and all necessary equipment Able to read blueprints and technical drawings Proficient with manual and power tools Familiar with code requirements and company safety regulations If you meet these requirements and are interested in applying, please submit an updated copy of your resume to the email address below. *************** Equal Opportunity Employer including Veterans/Disabilities

PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Technical Assembler II-Electrical Your Role: The Technical Assembler II performs a variety of complex builds for our diverse customer base. Tasks may consist of working from production blueprints, digital work instructions, parts lists, and verbal instructions to perform various electrical assembly functions as needed, based on customer requirements. Reports To: Production Supervisor Essential Functions: Assembles electrical machines and panel wiring by following work instructions. Reads and understands basic blueprints and electrical schematics. Applies 5S principles to daily tasks Uses precision measuring tools, such as calipers, thread gauge, and feeler gauge Reviews completed items to quality specifications Basic Qualifications: Willing to perform repetitive tasks while sitting or standing for extended periods of time High school / equivalent, or a 2 year technical education Prior knowledge of hand or power tools Attention to detail Preferred Qualifications: Experience with wire boards, schematics, production blueprints are a plus Clean room experience a plus Work Authorization: US Persons PEKO Perks: Competitive Compensation Tuition Reimbursement (IRS Allowable pre-tax Max) 401K, Medical, Dental, Vision Flexible Spending & Health Savings Accounts Life, Short and Long-Term Disability Recognition Awards & Discretionary Benefits Our Core Values: Compassion: We care about our talented and loyal PEKO family. Safety: We are committed to providing a safe, clean, and positive workplace. Integrity: We believe in transparency, honesty, and respect for all stakeholders. Agility: We are dedicated to maintaining an agile and financially prudent organization. Endurance: We foster the belief that PEKO people are resilient problem-solvers impacting the future. Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice. For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $17.00- $22.00 per hour. The wage range for this role considers a wide range of factors when making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training.

Job DescriptionPEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Technical Assembler II-Electrical Your Role: The Technical Assembler II performs a variety of complex builds for our diverse customer base. Tasks may consist of working from production blueprints, digital work instructions, parts lists, and verbal instructions to perform various electrical assembly functions as needed, based on customer requirements. Reports To: Production Supervisor Essential Functions: Assembles electrical machines and panel wiring by following work instructions. Reads and understands basic blueprints and electrical schematics. Applies 5S principles to daily tasks Uses precision measuring tools, such as calipers, thread gauge, and feeler gauge Reviews completed items to quality specifications Basic Qualifications: Willing to perform repetitive tasks while sitting or standing for extended periods of time High school / equivalent, or a 2 year technical education Prior knowledge of hand or power tools Attention to detail Preferred Qualifications: Experience with wire boards, schematics, production blueprints are a plus Clean room experience a plus Work Authorization: US Persons PEKO Perks: Competitive Compensation Tuition Reimbursement (IRS Allowable pre-tax Max) 401K, Medical, Dental, Vision Flexible Spending & Health Savings Accounts Life, Short and Long-Term Disability Recognition Awards & Discretionary Benefits Our Core Values: Compassion: We care about our talented and loyal PEKO family. Safety: We are committed to providing a safe, clean, and positive workplace. Integrity: We believe in transparency, honesty, and respect for all stakeholders. Agility: We are dedicated to maintaining an agile and financially prudent organization. Endurance: We foster the belief that PEKO people are resilient problem-solvers impacting the future. Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice. For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $17.00- $22.00 per hour. The wage range for this role considers a wide range of factors when making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR C1diQiKzM6

Perform electrical maintenance and troubleshooting on stamping presses and associated equipment. Perform basic mechanical troubleshooting and repair of stamping presses and associated equipment. Install and set-up new equipment and fixtures as needed. Job Responsibilities & Requirements ESSENTIAL FUNCTIONS: Work with stamping operations to ensure plant equipment is operating when necessary, through diagnosis, troubleshooting, and repair. Issues may be mechanical, hydraulic, electrical, or electronic. Ensure preventative maintenance is performed on all plant equipment to ensure maximum productivity. Schedules may be directed by manufacturer's specifications or developed internally. Work with stamping operations to focus on improving productivity through the use of improvements in machines, materials, or processes. Install and troubleshoot any new equipment as directed. Attendance at work during the regularly scheduled shift is an essential duty. This includes, but is not limited to the ability to work overtime as required, to be present at work, arrive on time and be at the work station ready for work at the start of the shift. SKILLS & ABILITIES: Education: High School diploma or general education certificate (GED) or Technical School, or five years related experience and / or training. Language Skills: Effectively communicate with co-workers and management regarding work and safety issues. Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Write routine reports and correspondence Computer Skills: Use Microsoft Windows, Microsoft Office and PLC Programming Software (Allen Bradley and Mitsubishi Preferred). CAD and Computerized Maintenance Management System (CMMS) software experience is a plus. Certificates & Licenses: Journeyman or Maintenance Electrician License preferred. Equivalent training and experience may be accepted. Must qualify in MiTek Lock-Out Tag-Out program and Forklift Certification. Other MiTek Certifications as required. Other Skills and Abilities: Basic computer set-up and basic networking skills experience a plus. Basic welding skills (i.e. Mig, Arc, Cutting Torch, etc.) are a plus. MiTek Perks Generous time off including Paid Time Off, 13 annual holidays, and volunteer time off Day One Medical/Rx, Dental and Vision Plans Family friendly benefits including Paid Caregiver Leave, Paid Parental Leave and Adoption Reimbursement Performance/Incentive bonuses Career advancement, training opportunities, Employee Resource Groups, and tuition reimbursement Retirement programs including Matching 401(k) Contributions and Profit Sharing Employer paid Short-Term Disability, Long-Term Disability and Life Insurance my FlexPay partner - allows you to track, manage and access your pay anytime MiTek is a platform innovator and enabler that exists to transform the building industry with better building solutions. In 1955, MiTek transformed residential construction with the invention of the Gang-Nail plate and a digital platform that provided an affordable and scalable way to manufacture wood trusses. Today, MiTek delivers software, services, engineered products, and automated solutions that enable the building industry to improve efficiencies by optimizing the balance between off-site and on-site. With nearly 5,600 team members worldwide, MiTek collaborates across the building industry to enable and accelerate transformational breakthroughs in design and construction to transform the way the industry designs, makes, and builds. As a Berkshire Hathaway (NYSE: BRK-A, NYSE: BRK-B) company since 2001, MiTek has a record of continuous growth and innovation. MiTek is an E-Verify and Drug and Tobacco-Free Workplace. We are an equal opportunity employer; and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, ethnicity, physical or mental disability, sex (including pregnancy, sexual orientation, gender identity or expression, or transgender status), age (40 and over), genetic information (including family medical history), veteran status, or any other protected characteristic. For accommodation to assist with completing this application, please contact Human Resources at ***************. ***********

The Electrical Technician will install, maintain, troubleshoot, and repair electrical systems for both residential and commercial customers. This role requires technical expertise, a commitment to safety, and the ability to mentor apprentices. Install and Service Electrical Equipment: Install electrical wiring, outlets, lighting fixtures, circuit-breaker panels, and other electrical systems. Service and repair malfunctioning electrical equipment, such as alarm systems and lighting systems, for residential and commercial properties. Troubleshoot and Diagnose Issues: Conduct thorough evaluations of electrical systems during service calls. Apply experience and technical knowledge to identify and implement solutions to restore systems to full functionality. Promote and Maintain Safety Standards: Adhere to all industry and company safety standards. Use appropriate safety equipment and implement safety procedures on all jobs. Complete and Maintain Paperwork: Compile and complete all necessary paperwork, including job reports, invoices, and documentation of services performed. Train and Mentor Apprentices: Provide guidance and training to apprentices, supporting their growth and development in the trade. Carry out additional responsibilities as directed by leadership. Qualifications Competencies This position requires strong time management skills and the ability to work with minimal supervision. Must be able to maintain a high level of professionalism and customer service standards in stressful situations. This position requires the ability to communicate effectively, both verbally and written. This position requires a self-starter with excellent problem-solving, analytical skills and mechanical aptitude. The position also requires the ability to read blueprints, extensive knowledge of electrical systems and wiring, the ability to use hand tools and power tools, proficiency in the use of test meters and diagnostic equipment. Education and Experience This position requires a minimum three (3) years of previous electrical experience and hold a current Electrical License of a Wireman or greater. Requires a high school diploma and/or any equivalent of education and experience to meet the essential functions of the job. Must have a valid driver's license and remain insurable under our company insurance policy.

Quailfications: Assembling, evaluating, and testing of switching power supplies up to 1KW. Knowledge and experience of using electronic measurement equipment such as Oscilloscopes, DVM, Spectrum Analyzers, Thermal chambers, and wattmeters. Troubleshooting and repairing of switching power supplies from production or from the field. Constructing and fabricating metal or plastic parts, using hand tools and specifications. Reading and interpreting electrical and electronic circuit schematics. Advising engineers on problems and offering solutions. Education Requirements: Minimum 2 year technical degree in electronic technology Benefits: 401(k) matching FSA Accounts Dental insurance Health insurance Vision insurance Life insurance Paid time off

Perform a wide range of assembly, test and troubleshooting tasks on complex electronic assemblies and final products (servers, storage appliances, etc). ESSENTIAL DUTIES AND RESPONSIBILITIES: Assemble and re-assemble products in accordance to process documentation and manufacturing procedures. Test and troubleshoot server appliances to the sub-assembly level. Identify root cause of problems. Lift servers in and out of testing racks consistently. Determine work schedule to meet product delivery requirements Must be familiar with Operating Systems (Windows, Linux), Bios, etc.) to help diagnose problems. Track analysis on various internal systems & spreadsheets [Excel]. Assure products are at the latest revision and that they were configured to the BOM/process sheet requirement Analyze incoming RMA systems to determine fault mechanism - H/W or S/W Work with manufacturing engineering, assist with resolution of issues and the development of process documentation as well as labor standards. Follow good E.S.D. practices and maintain a clean and organized work area. Learn about Company's business as appropriate. Shows up to work on time and attends work as scheduled. All other duties as requested by supervisor or department head. Qualifications COMPETENCY QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. If an employee does not meet the required competency level in any area, a required development training plan will be implemented. Job-Specific Competencies: (Education and/or years of experience; technical and/or analytical; software or applications; department and/or position specific; internal or external certifications required) High School diploma; 2-year degree or vocational school 2-year experience in the PC industry Be familiar with operating systems and firmware, [BIOS, FRU, SDR, BMC] used in UEI products to help diagnose problems General understanding of manufacturing systems [i.e. Factory Talk ] Strong system knowledge of Windows, Linux etc Excellent organizational and communications skills Proficient with MS Excel Ability to follow all applicable Business Management System (BMS) processes. 490-2018-01/02 UNICOM Assembly operator certification Management Competencies: (Management experience required) N/A Core Competencies: (Other core requirements including communication, presentation, langu age, math, and reasoning skills) Ability to read, write and speak English. Ability to compose reports and correspondence. Knowledge of basic addition, subtraction, division and multiplication of numbers is required. Ability to define problems, collect data, establish facts and draw valid conclusions. Know and follow established company core values. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; to sit, stand, walk; and to talk and hear. Specific vision abilities required by this job include close vision and the ability to adjust focus. Requires regular lifting of servers. The employee must be capable of lifting chassis between work stations and perform packing tasks Lifting Requirement: 50 pounds Lifting Limitations: 50 pounds WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. COMPANY DESCRIPTION UNICOM Engineering is a Strategic OEM Integration Partner; starting with scalable and reliable hardware, combined with a suite of services from design engineering to system integration, logistics, regulatory and trade compliance, as well as support. UNICOM Is known best for its solution design technologies, integration expertise, and unique deployment capabilities. UNICOM is proud to be in compliance with ISO 27001, ISO 9001, ISO 14001, and TL9000; assuring that customers receive high-reliability products and services that meet or exceed industry standards. With primary facilities Plano, TX, Canton, MA, and Galway, Ireland, UNICOM continues to maintain one of the largest portfolios of purpose-built turnkey platforms. For additional information, visit: ************************* or follow us on LinkedIn. UNICOM'S VISION To provide technology solutions to enable innovators to drive digital transformation and exceptional experiences UNICOM'S MISSION Enabling global technology companies to deliver innovation while providing superior brand protection UNICOM'S CORE VALUES Integrity, Partnership, Flexibility, Innovation, Flawless execution PERKS OF WORKING AT UNICOM Employees of UNICOM have a wide range of benefits available to them such as Medical, Dental, Vision, Healthcare and Dependent Care FSA, Voluntary Life Insurance Plans, and 401(k). UNICOM provides its employees with Basic Life and AD&D Insurance, Long Term Disability Insurance, and Short-Term Disability Insurance. In addition to accrued PTO, UNICOM offers 8 paid holidays plus 2 floating holidays each year. UNICOM provides employees with a Tuition Reimbursement Program and Employee Assistance Program which also includes a large library of educational videos to encourage growth. UNICOM also provides employees with a Wellness Program to promote a healthy lifestyle. Peer recognition for going above and beyond is encouraged and milestone tenure is recognized and celebrated. UNICOM was given a rating of 4.13 (out of 5) on the confidential internal 2025 Employee Survey!

Job DescriptionSalary: $38k-$58k Quailfications: Assembling, evaluating, and testing of switching power supplies up to 1KW. Knowledge and experience of using electronic measurement equipment such as Oscilloscopes, DVM, Spectrum Analyzers, Thermal chambers, and wattmeters. Troubleshooting and repairing of switching power supplies from production or from the field. Constructing and fabricating metal or plastic parts, using hand tools and specifications. Reading and interpreting electrical and electronic circuit schematics. Advising engineers on problems and offering solutions. Education Requirements: Minimum 2 year technical degree in electronic technology Benefits: 401(k) matching FSA Accounts Dental insurance Health insurance Vision insurance Life insurance Paid time off