Crown and bridge technician jobs near me

Competitive Pay: This position offers an hourly wage ranging from $25.56/hr. to $33.00/hr., depending on experience and qualifications. Position: Finishing Technician II Job Summary: To provide repair and preventive maintenance services for qualified customer equipment at OTC and customer locations. Have strong computer/electronics knowledge - some equipment requires electronic troubleshooting and basic programming. Essential Duties and Responsibilities: * Troubleshoot, repair and service customer equipment by diagnosing problems * Responsible for providing field service and maintenance support of industrial manual and automation equipment * Assist with system install, setup, and commissioning * Answer customer inquiries regarding repair questions * Prepare documentation regarding work performed and enter in computer * Prepare repaired/serviced customer equipment for shipping * Rebuild used equipment for resale * Maintain demonstration equipment including performance test before use, document and track use by employees or customers, flush/clean/repair as needed upon return from use, test and put into storage when done. * Assemble special jobs and projects, as requested * Participate in product training as required * Participate in product demonstrations with salespeople in our lab and in the field. * Participate in establishment of contracts for repair and maintenance service. * Assist in lab clean-up and review for safety issues. Qualifications * High school graduation or equivalency; emphasis on office, shop or other skills * Ability to travel up to 50% of the time; overnight travel may be required * Minimum 3 years' experience in skilled trades; or proven equivalent experience * Minimum 2 certifications, or ability to maintain within the first 6 months of role, from primary vendors of the Finishing, Dispensing & Filtration group (Graco, GEMA, Fanuc, Sames, CFT, etc.) * Minimum 2 years' experience of at least 1 of the following: Finishing processes and equipment, Pump and pump motor, routing and installation of tubing and piping, or other related industry exposure * Proven mechanical and electrical knowledge sufficient to diagnose and resolve equipment problems * Proven experience in disassembling equipment needing repair, diagnosing problems, cleaning and refurbishing/replacing parts as needed, reassemble, and test * Proven experience in using/operating tools such as wrenches, drivers, and power tools * Proven experience using electrical diagnostic equipment * Proven experience reading and understanding documents such as policy manuals, safety rules, operating and maintenance instructions, and procedure manuals; ability to write routine reports and correspondence. * Proven experience in effectively communicating information and responding to questions in person-to person and small group situations with customers, clients, general public and other employees of the organization. * Familiarity with 5S * Proficient in Microsoft Office Suite (Excel, Word, Outlook, Teams) * Ability to operate forklift, and a pallet jack * Ability to meet the physical requirements of the job * Valid driver's license with driving record acceptable to OTC insurance company * Must be able to work in an environment with possible paint and solvent odors present * Ability to work in environments that may include: * Moving mechanical parts * Fumes or airborne particles * Painting chemicals and solvents * Electrical equipment Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Requires ability to walk, climb, stand, carry materials, stoop, kneel, bend at waist. * Maximum unassisted lift = 50 lbs. Average lift less than 50 lbs Competencies To perform the job successfully, an individual should demonstrate the following competencies: * Adaptability - Ability to be flexible and adjust to changes in your work environment. You can respond quickly to changing ideas, responsibilities, expectations, trends, strategies and other processes. Being adaptable also means possessing soft skills like interpersonal, communication, creative thinking and problem-solving skills. * Accuracy - Ability to detect errors in normal course of work by standard check or routine crosscheck. Errors resulting from inaccuracy would create minor confusion, delay or expense to correct the situation. * Dependability - Follows instructions, responds to management direction; Keeps commitments. * Initiative - Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. * Customer Service - Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance. * Problem Solving - Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Develops innovative approaches and ideas; Presents ideas and information in a manner that gets others' attention. * Planning/Organization - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Develops realistic action plans. * Communication and Interpersonal Skills - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Demonstrates group presentation skills. * Collaboration - Ability to work with others to achieve a common goal; Building and maintaining relationships through shared responsibility, respect, and empathy.

Join National Dentex - a leading healthcare organization specializing in the dental industry! We offer a full spectrum of specialized products, services, and technologies to address any dental restoration need. Currently, we have 50 labs throughout the country. We are seeking to fill a number of key positions within our organization including this Dental Lab Technician II opportunity at NDX Dresch in Sylvania, OH. The regular hours for this position are from 7:30 AM to 4:30 PM, Monday through Friday, and subject to change from time to time. This is a full-time position featuring employee benefits including: health, dental, vision, disability, and life insurance; paid holiday, vacation, and sick time; 401K with company contribution; and tuition reimbursement! Primary Responsibilities and Essential Functions of the Position: • Pour positive models from impressions supplied by dentists using liquid stone mixture. • Number all models and impressions with case number. • Trim models with bulk and or fine trimmer. • Pindex models and place pins in dies. • Saw out dies using proper technique to make dies removable for fabrication. • Apply die hardener and die spacer to dies. • Place models on appropriate type of articulator using correct technique articulating to correct bite relationship. • Prepare specialty models including epoxy models and those for implant cases and combination cases. • Fabricate soft tissue models. • Fit crowns to abutments, sandblast abutments and write tooth numbers on the facial of abutment. • Wax cases to correct specifications. • Fit all work to a solid poured or digitally printed model. • Choose correct porcelain. • Build to correct contour, blend and occlusion. • Stain and glaze with crown clean-up functions on posterior restorations. • Complete esthetic anterior PFZ, PFM and full contour cases. • Fire at the correct temperature and for the appropriate amount of time. • Steam clean required items. • Return items to proper pan. • Complete cases according to work ticket schedule. • Scan and initial cases as required. • Review final work and check completely that all quality standards have been met before passing the work to the next technician. • Perform basic porcelain repairs according to Technical Team Policies (TTP's). • All other duties as assigned. Skills and Abilities that may be Required: • Knowledge of tooth anatomy • Ability to articulate according to Rx • Knowledge of materials (i.e. stones, acrylic) • Identify through Impressions margins • Must be able to understand, read, write and speak English. Minimum Education and Experience Required: • High School diploma or GED preferred • Verifiable relevant employment experience may be considered in lieu of education Hazardous Materials or Equipment that may be Used: • Laboratory equipment that may include: grinders, lathes, ovens, burners, steamers and boiling water. Physical Abilities that may be Required: • Sitting for long periods of time, uncommon posture when fabricating and continuous maneuvering of hands and fingers while working with small tools. • Exhibit fine motor skills and/or perform repetitive motions • Good hand-eye coordination • Good manual dexterity • Ability to walk and stand for long periods of time • Repeated bending and kneeling • Vision capabilities: Depth perception, attention to detail and/or color • May be required to push, pull, lift, and/or carry up to 25 pounds

Flexjet Interiors is currently hiring Finish Technicians. We offer competitive pay and benefits and room for growth. RESPONSIBILITIES: Perform general mechanical functions on aircraft cabinets and related systems. This shall include, but not be limited to, items such as removal and installation of cabinets, modification, re-laminating, re-finishing, veneering or fabrication of new cabinets. Ability to spray and polish gloss/satin coatings. Ability to perform minor modifications. Ability to perform wood touch up repairs. Maintenance and repair equipment and tooling when required. Cleanliness of shop and surroundings. Work independently when required. Any other job-related duties as assigned by Management REQUIREMENTS: Education High school diploma or equivalent. Experience 3-5 years experience on aircraft cabinetry to include building, modification, and finishing Strong mechanical aptitude within Aviation with an understanding of aircraft interiors and associated components, including repairs and fabrications. Computer Skills Basic Computer skills. Experience in Aviation Maintenance Software Programs, Corridor background preferred. Written and verbal communication skills. Responsibility Able to perform all work in accordance with Federal Aviation Administration guidelines. Follow all company and safety rules during performance of duties. Maintain customer-oriented work habits.

Job Description: Dental Laboratory Technician About Us: Join a small, highly respected dental laboratory in Cleveland, Ohio, known for its dedication to precision and quality. We are a full-service lab specializing in crown and bridge work, with additional expertise in removable cases, All-on-X conversions, and implant restorations. Our team is passionate about delivering exceptional results while fostering a fun, family-like atmosphere. Position Overview: We are seeking a skilled Dental Laboratory Technician to join our team. The ideal candidate will have comprehensive experience in fixed and removable dental prosthetics, including crown and bridge work, but we are willing to train the right candidate in removable and All-on-X cases. This role requires a mix of traditional craftsmanship and digital expertise, working collaboratively with a close-knit team that values innovation, growth, and camaraderie. Responsibilities: Fabricate crown and bridge restorations, including metal frameworks and wax-pressed e.max restorations. Perform staining and glazing of restorations to achieve optimal esthetics. Contribute to All-on-X conversions and implant restorations. Work on removable cases, with training provided if necessary. Utilize digital workflows, including 3Shape and Exocad software for design. Operate on-site printing and milling equipment. Collaborate with the team to maintain a positive, productive work environment. Stay open to learning and adopting new techniques and technologies. Qualifications: Proven experience in traditional crown and bridge work, including metal framework, wax press e.max, and esthetic finishing. Some experience or a willingness to learn removable cases and All-on-X restorations. Familiarity with digital dental technology, including CAD/CAM design software (3Shape and Exocad) and milling/printing systems. Strong attention to detail and commitment to high-quality work. Excellent teamwork skills and a desire to contribute to a supportive, fun, and family-oriented team. A learning mentality and openness to new ideas and techniques. Compensation and Benefits: Salary: $70,000-$90,000, based on experience. Benefits: 50% medical coverage. Paid Time Off: 2 weeks of paid vacation plus 5 double-holiday days per year (e.g., the day after Thanksgiving). Relocation Assistance: Available if needed. What We Offer: Opportunity to work in a highly respected, quality-driven dental laboratory. Training and mentorship in areas where you wish to grow. A supportive, team-oriented work environment that values personal and professional development. Competitive compensation package with benefits and relocation support.

**Job Title:** Finishing Technician **Pay:** $ 19.00/hour **Schedule:** Light Industrial Roles - Casual but appropriate wear; steel toe shoes or boots typically required. No clothing with rips, tears, or holes. **SUMMARY DESCRIPTION** Performs deburr, finishing, inspection, and cleaning in a job shop or high-volume environment. Processes components to meet print and/or geometric tolerance requirements. Responsible for the setup, operation, and maintenance of production equipment used for deburr, finishing, and cleaning operations. Maintains proper documentation and supports the manufacturing engineering function. **ESSENTIAL DUTIES AND RESPONSIBILITIES** To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. **%Responsibility** **20%** Under close supervision, completes tasks as directed by SOPs, routers, prints, work instructions, and manufacturing schedules. **20%** Under close supervision, operates production equipment for basic deburr, finishing, and cleaning operations such as sandpaper, Scotch-Brite, pencil grinders, bead blasters, tumblers, and heat treat ovens. **10%** Performs packaging and other duties as required. **10%** Performs in-process checks using measuring devices and reports defective materials or questionable conditions to the department lead or supervisor. **10%** Verifies conformance of finished workpieces to specifications using measuring instruments such as fixed gauges, calipers, and micrometers. **5%** Adheres to dimensions and tolerances found on prints; may use prints and sketches to determine proper methods and processes when not specified on routers or work instructions. **5%** Reworks production parts and performs emergency rework and/or modification of production parts as directed. **5%** Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations. **5%** Trains other employees. **5%** Works on projects as part of a team, exchanging ideas and contributing skills that complement those of other team members. Fulfills commitments to team members. **5%** Recommends and implements process improvements with the support of management and the engineering department as required. **DESIRED MINIMUM QUALIFICATIONS** The requirements listed below are representative of the knowledge, skill, and/or ability required for this position: + High School diploma or equivalent + 0-2 years of manufacturing experience preferred **Pay Details:** $19.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ********************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: + The California Fair Chance Act + Los Angeles City Fair Chance Ordinance + Los Angeles County Fair Chance Ordinance for Employers + San Francisco Fair Chance Ordinance **Massachusetts Candidates Only:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Check out our company! Click here to watch Job Title: Denture Technician Company: ROE Dental Laboratory Location: Independence, Ohio Job Type: Full-Time Are you a skilled Denture Technician looking for a rewarding opportunity to showcase your talent in a dynamic dental lab environment? ROE Dental Laboratory is seeking a motivated and experienced Denture Technician to join our team. Responsibilities: Denture Fabrication: Craft high-quality dentures according to dentist prescriptions, ensuring precision and attention to detail. Model Work: Create accurate models of patients' mouths, considering anatomical nuances and individual requirements. Repair and Adjustments: Perform denture repairs and adjustments promptly, maintaining a commitment to customer satisfaction. Collaboration: Work closely with dentists and other dental lab team members to understand and meet client expectations. Quality Control: Conduct thorough quality control checks to ensure the final product meets the highest standards of craftsmanship. Requirements: Proven experience as a Denture Technician Relevant education and certification in dental technology preferred Proficient in the use of dental laboratory equipment and technologies. Strong attention to detail and excellent hand-eye coordination. Effective communication skills to collaborate with dental professionals and convey technical information. Ability to adapt to new techniques, materials, and industry trends. Efficient time management skills to meet deadlines and handle multiple projects simultaneously. Benefits Medical Insurance Vision Insurance Life Insurance In-House Dental Care PTO PTO for Most Holidays 401(k) with match If you are a dedicated Denture Technician with a passion for delivering exceptional dental prosthetics, we invite you to apply. Join our team at [Your Dental Lab Name] and contribute to creating beautiful smiles for our customers.

Job DescriptionYour 2:00pm Story Starts Here You clock in at our Avon, Ohio facility and gear up. The spray gun is calibrated, your booth is staged, and a traveler packet with blueprints is waiting. You prep parts for the aerospace and aviation industry, mask with precision, confirm specs, and apply coatings safely and consistently. By 10:30pm, the final inspection is complete, the booth is spotless, and tomorrow's work is staged. About Cutting Dynamics, LLC (A Re:Build Company) Cutting Dynamics, part of the Re:Build Manufacturing family, has supported aerospace and other industries for 30+ years. Our mission is to deliver unmatched value on high-quality components, assemblies, and kitting through measurable objectives, leading-edge technology, and continuous improvement. About Re:Build Manufacturing Re:Build is a growing family of industrial and engineering businesses focused on revitalizing U.S. manufacturing. We combine enabling technologies, operational excellence, and strategic M&A to elevate performance. Our capabilities span product and systems design, automation, fabrication, assembly, and high-volume contract manufacturing-serving aerospace, defense, mobility, healthcare, pharma, biotech, clean tech, chemicals, energy, lifestyle, food production, and industrial equipment. Role Snapshot We're hiring an Industrial Painter to support our aerospace finishing operations on second shift. You'll apply coatings with speed, accuracy, and a safety-first mindset. Shift & Schedule 2nd shift 5-day work week 8-hour shifts 2:00pm - 10:30pm What You'll Do Prepare and paint/fabricate parts rapidly, precisely, and safely for aerospace applications. Load and unload parts from paint booths, drying racks, and related equipment. Clean and surface-prep components before and after paint. Mask per blueprints, travelers, and other instructions. Place products in equipment or on work surfaces for additional processing, inspection, or wrapping. Examine finished work to verify conformance to quality standards. Start machines or equipment to initiate paint or related processes. Safely, accurately, and efficiently operate paint-process equipment and instruments, or assist other operators. Maintain a clean work area and clean all paint-process equipment. Follow procedures for proper storage and handling of materials. What You Bring High school diploma or GED. Experience in industrial or automotive painting. Competence in inspecting your own work. Basic math skills. Fluency in written and spoken English. Integrity and a strong safety mindset. Why Re:Build We're building something that improves the industries and communities where we operate. Every Re:Build employee shares ownership in our company and participates in the financial success we create together-at all levels. Our Commitment We want to work with people that reflect the communities in which we operate Re:Build Manufacturing is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, marital status, parental status, cultural background, organizational level, work styles, tenure, and life experiences. Or for any other reason. Re:Build is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures. If you need assistance or accommodation due to a disability, you may contact us at accommodations.ta@ReBuildmanufacturing.com or you may call us at ************.

At Aspen Dental, we put You first, offering the security and job stability that comes with working with a world-class dental service organization (DSO). Our best-in-class training program, competitive compensation, and cutting-edge technology will help you thrive in your career. When you join our team as an Entry-level Denture Lab Technician, you can give back to communities and positively affect patients' lives. Job Type: Full-Time Salary: $18 - $22 / hour At Aspen Dental, we put You First. We offer: * State-of-the-art paid training program * Paid time off and holidays * Health, Dental, Vision, and 401(k) savings plan * Career development and growth opportunities to support you at every stage of your career * A fun and supportive culture that encourages collaboration and innovation How You'll Make a Difference As an Entry-level Denture Lab Technician, you will have a great career and so much more. We will take you through our training program to learn traditional and digital denture production. You will have the ability to showcase your artistic skills to create better smiles and improve lives within your community. You will have access to industry-leading equipment, instruments, thought leaders, and certified trainers. * Collaborate with dentists to ensure optimum patient satisfaction * Assemble / fabricate dentures * Complete prosthetic repairs, relines, and re-bases * Assist with the preparation of laboratory supply orders * Work collaboratively with other members of the dental team to provide exceptional patient care Qualifications: * Strong communication and interpersonal skills, with the ability to build rapport with patients of all ages and backgrounds * Good hand-eye coordination and manual dexterity * Ability to pay attention to details * The ability to pass a hands-on skill assessment/bench test * Commitment to ongoing learning and professional development * Experience working in a dental office a plus * Ability to relocate after training period is required Aspen Dental-branded practices are independently owned and operated by licensed dentists. The practices receive non-clinical business support services from Aspen Dental Management, Inc., a dental support organization. ADMI Corp., d/b/a TAG-The Aspen Group, its affiliates, related companies and independently owned supported clinical practices are proud to be Equal Opportunity Employers and welcome everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Check out our company! Click here to watch Position: Dental Lab Technicians/Professionals On Site Locations (Analog Work): Ohio, Illinois, New York Remote Locations (Digital, for CAD Designers Only!): Pennsylvania, Indiana, Utah, Oregon, Wisconsin Job Type: Full-time Description We are always seeking experienced Dental Lab Technicians and Dental Lab Professionals to fill multiple positions across the United States. Although a position may not be open at the current moment, we will keep your resume on file for future opportunities. We are looking for individuals with expertise in various specialties including Ceramics, Crown and Bridge, Removables, Implants, Digital Design, Lab Management, Technical Management, and Sales. Responsibilities: Read and interpret dental prescriptions and specifications Create dental prosthetics, including crowns, bridges, and dentures Use dental lab equipment, such as milling machines and 3D printers, to create prosthetics Ensure that all prosthetics meet quality standards and are delivered on time Maintain accurate records of all work performed Communicate with dentists and other dental professionals to ensure that prosthetics meet patient needs Requirements: High school diploma or equivalent Minimum of 2 years of experience as a dental lab technician Strong knowledge of dental lab technology and equipment Excellent attention to detail and ability to work independently Strong communication and interpersonal skills Ability to work in a fast-paced environment and meet tight deadlines Benefits: Health and vision insurance In-house dental care Life insurance 401(k) plan with company match Paid time off and holidays Opportunities for advancement If you are a skilled Dental Lab Technician or Professional looking for exciting opportunities in a dynamic work environment, we encourage you to apply. Join our team and be part of the forefront of dental technology and innovation. To apply, please submit your resume along with a cover letter highlighting your relevant experience and specifying your preferred specialty and location.

At Aspen Dental, we put You First, offering the security and job stability that comes with working with a world-class dental service organization (DSO). Our best-in-class training program, competitive compensation, and flexible scheduling will help you thrive in your career. When you join our team as a Denture Lab Technician, you will have the opportunity to give back to communities and positively affect patients' lives. Job Type: Full-Time Salary: $25 - $32 / hour At Aspen Dental, we put You First. We offer: Paid time off and holidays Health, Dental, Vision, and 401(k) savings plan with match Career development and growth opportunities to support you at every stage of your career How You'll Make a Difference As a Denture Lab Technician, you will get a great career and so much more. You will have the ability to showcase your artistic skills to create better smiles and improve lives within your community. You will have access to state-of-the art equipment and instruments to perform your artistry. We're also committed to leading the way in digital dentures. Collaborate with dentists to ensure optimum patient satisfaction Oversee your own laboratory Fabricate dentures from impression to insert Complete prosthetic repairs, relines, and re-bases Oversee preparation of laboratory supply orders Work collaboratively with other members of the dental team to provide exceptional patient care Qualifications: Strong communication and interpersonal skills, with the ability to build rapport with patients of all ages and backgrounds Experience with complete fabrication of quality denture products from start to finish The ability to pass a hands-on skill assessment/bench test completing such process Commitment to ongoing learning and professional development Training in dental lab technology a plus Aspen Dental-branded practices are independently owned and operated by licensed dentists. The practices receive non-clinical business support services from Aspen Dental Management, Inc., a dental support organization. ADMI Corp., d/b/a TAG-The Aspen Group, its affiliates, related companies and independently owned supported clinical practices are proud to be Equal Opportunity Employers and welcome everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Check out our company! Click here to watch Artistic? Skilled with your hands? Have an eye for detail and a drive to master a craft? We're hiring Dental Lab Technician Trainees to join our expert team. This is a hands-on career opportunity with structured training, professional mentorship, and room for advancement in a respected, highly specialized field. Our technicians help craft life-changing dental restorations - precision, care, and craftsmanship matter. Job Title: Dental Lab Technician Trainee Status: Full Time Schedule: Monday-Friday, 8 Hour Shift (day shift) We are seeking an entry-level Dental Lab Technician Trainee to join our team. This is a rewarding career path with on-the-job training and opportunities for career advancement. If you are looking for a rewarding career in dental lab technology and are willing to work hard and learn, we encourage you to apply for this exciting opportunity. Responsibilities: Assist in the creation of dental prosthetics, including crowns, bridges, and dentures. Learn and follow dental lab procedures and protocols Work with a team of experienced dental lab technicians to produce high-quality dental prosthetics Keep work area clean and organized Requirements: Artistic and good with your hands Ambitious and focused on learning and growing in the field of dental lab technology Organized and detail-oriented Willingness to learn and follow established procedures and protocols Qualifications: High school diploma or equivalent On-the-job training provided Benefits: Health and vision insurance In-house dental care Life insurance 401(k) plan with company match Paid time off and holidays Opportunities for advancement Starting at $17.50+/hour, depending on skill and experience.

At Aspen Dental, we put You First, offering the security and job stability that comes with working with a world-class dental service organization (DSO). Our best-in-class training program, competitive compensation, and flexible scheduling will help you thrive in your career. When you join our team as a **Denture Lab Technician** , you will have the opportunity to give back to communities and positively affect patients' lives. **Job Type:** Full-Time **Salary:** $25 - $32 / hour **At Aspen Dental, we put You First. We offer:** + Paid time off and holidays + Health, Dental, Vision, and 401(k) savings plan with match + Career development and growth opportunities to support you at every stage of your career **How You'll Make a Difference** As a **Denture Lab Technician** , you will get a great career and so much more. You will have the ability to showcase your artistic skills to create better smiles and improve lives within your community. You will have access to state-of-the art equipment and instruments to perform your artistry. We're also committed to leading the way in digital dentures. + Collaborate with dentists to ensure optimum patient satisfaction + Oversee your own laboratory + Fabricate dentures from impression to insert + Complete prosthetic repairs, relines, and re-bases + Oversee preparation of laboratory supply orders + Work collaboratively with other members of the dental team to provide exceptional patient care **Qualifications:** + Strong communication and interpersonal skills, with the ability to build rapport with patients of all ages and backgrounds + Experience with complete fabrication of quality denture products from start to finish + The ability to pass a hands-on skill assessment/bench test completing such process + Commitment to ongoing learning and professional development + Training in dental lab technology a plus _Aspen Dental-branded practices are independently owned and operated by licensed dentists. The practices receive non-clinical business support services from Aspen Dental Management, Inc., a dental support organization._ _ADMI Corp., d/b/a TAG-The Aspen Group, its affiliates, related companies and independently owned supported clinical practices are proud to be Equal Opportunity Employers and welcome everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability._