Manufacturing Engineer jobs at Crown Equipment

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. Job Posting External Job Duties Support current process technology and implement improvements to department/plant operations based upon manufacturing engineering analysis of existing operations compared to future requirements based on capacity, cost reduction, safety and/or risk avoidance opportunities. Help to prepare project justification including recommendations, make-vs-buy analysis, layout, cost impact and schedule activities as required. Implementation of processes including equipment procurement, coordination of installation, process capability prove-out, training, process documentation, work standard measurement and production start-up. Contribute to the product introduction process. Review production problems as they are identified and implement solutions. Develop, implement and update documentation and training Develop reports, project briefings and management presentations. Perform other duties as assigned. Minimum Qualifications 8-15 years related experience High School graduate or equivalent Job requires employee to drive a personal vehicle to conduct company business < 20% per week (8 hours) and/or travel locally between company locations during scheduled workday. Must demonstrate good communication skills amongst shop floor, support staff, and plant leadership. Must be able to lead and execute small teams and projects. Requires good organizational and interpersonal skills, and the ability to train others Per 8-hour shift. Sit 8 hours and stand 0 hours. Typical office environment (low noise level, limited exposure hot/cold temperatures, dust, fumes, and vibrations). Regular interaction with others and performs a degree of independent work. Physical and mental demands are akin to the majority of office positions with prolonged periods of sitting and prolonged use of a computer/keyboard. Infrequent lifting, walking and climbing stairs. Occasional use of office equipment (copiers, printers, etc.). Preferred Qualifications Certain technical skills and training such as CNC programming, CAD layout, geometric dimensioning and tolerance (GD&T), process capability theory and statistical process control (SPC) may be required. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

**Requisition ID:** 69085 Whirlpool Corporation (NYSE: WHR) is a leading home appliance company, in constant pursuit of improving life at home. As the only major U.S.-based manufacturer of kitchen and laundry appliances, the company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including _Whirlpool_ , _KitchenAid_ , _JennAir, Maytag_ , _Amana,_ _Brastemp_ , _Consul_ , and _InSinkErator_ . In 2024, the company reported approximately $17 billion in annual sales - close to 90% of which were in the Americas - 44,000 employees, and 40 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com . **The Internship Program - May 2026 Start Date** Manufacturing is at the heart of what we do at Whirlpool Corporation. Our 10-12 week Manufacturing Leadership Development Program (MLDP): Controls Engineering Track Internship focuses on World Class Manufacturing methodology, and internship experiences and projects could be in areas such as lean manufacturing, quality, automation, process engineering, and many more. Upon successful completion of the summer internship program, you may be considered for employment opportunities within the Full Time MLDP: Controls Engineering Track post-graduation. **What we offer** + Competitive compensation + Housing stipend + Paid holidays + Robust professional development and skill building opportunities + Networking & exposure to senior leadership + Community service experiences + Social & recreational events Get to know more about our early career programs at ********************************************************** **Program location** This internship will take place at one of our North American plant locations. Many of our internships take place at our **Ohio** -based plant locations with potential opportunities for the internship to take place in our plants located in **Iowa, Tennessee, Oklahoma, or Massachusetts** . These sites produce a full line of appliances including refrigerators, washers, dryers, ranges, ovens, dishwashers, and KitchenAid portables. Reliable transportation is required for travel to work daily as public transportation is not available. Learn more about our Manufacturing locations and the communities where we live & work here ! **Minimum requirements** Intern project assignments are focused on our World Class Manufacturing methodology and could be in areas such as: + Lead automation projects related to process control, quality control, safety systems and vision systems + Design, develop, review and conduct coordination for test programs or components, small systems or processes, or materials taking into account customers, product performance, cost and quality requirements + Manage equipment / resource relocation projects which could include: redesign of current equipment or resources, working with suppliers to identify new equipment options and leading change management with impacted team members + Focus on cost-savings initiatives across a plant including: standardized work audits, Improving first pass yield and throughput, etc. + Learn and apply Lean Manufacturing tools to project(s) **Minimum requirements** + Pursuing bachelors degree with major in: Electrical Engineering, Controls Engineering, Automation Engineering, Robotics Engineering, Mechatronics Engineering or a related field + Pursuing a bachelor's degree with plans to graduate before or by May 2028 + Current cumulative GPA of 2.8 or higher + Must have indefinite US work authorization. Applicants who require visa sponsorship or work authorization now or in the future are not eligible for this program. **Preferred skills and experiences** + Strong enthusiasm for and knowledge of automation tools and technologies + Proven decision-making skills and ability to analyze and solve complex business problems through innovation and creativity + Ability to lead and work with teams to drive and achieve extraordinary results + Demonstrated maturity and confidence to effectively present ideas + Exceptional communication and interpersonal skills to build and maintain relationships in a culturally diverse environment + Self-discipline and ability to manage competing priorities Connect with us and learn more about Whirlpool Corporation See what it's like to work at Whirlpool by visiting Whirlpool Careers (********************************* . Additional information about the company can be found on Facebook (*************************************** , Twitter (********************************* , LinkedIn (************************************************************ , Instagram (**************************************** and YouTube (************************************************* . Whirlpool Corporation is committed to equal employment opportunity and prohibits any discrimination on the basis of race or ethnicity, religion, sex, pregnancy, gender expression or identity, sexual orientation, age, physical or mental disability, veteran status, or any other category protected by applicable law.

Corporation Whirlpool Corporation (NYSE: WHR) is a leading home appliance company, in constant pursuit of improving life at home. As the only major U.S.-based manufacturer of kitchen and laundry appliances, the company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including Whirlpool, KitchenAid, JennAir, Maytag, Amana, Brastemp, Consul, and InSinkErator. In 2024, the company reported approximately $17 billion in annual sales - close to 90% of which were in the Americas - 44,000 employees, and 40 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com. The Internship Program - May 2026 Start Date Manufacturing is at the heart of what we do at Whirlpool Corporation. Our 10-12 week Manufacturing Leadership Development Program (MLDP): Controls Engineering Track Internship focuses on World Class Manufacturing methodology, and internship experiences and projects could be in areas such as lean manufacturing, quality, automation, process engineering, and many more. Upon successful completion of the summer internship program, you may be considered for employment opportunities within the Full Time MLDP: Controls Engineering Track post-graduation. What we offer * Competitive compensation * Housing stipend * Paid holidays * Robust professional development and skill building opportunities * Networking & exposure to senior leadership * Community service experiences * Social & recreational events Get to know more about our early career programs at ********************************************************** Program location This internship will take place at one of our North American plant locations. Many of our internships take place at our Ohio-based plant locations with potential opportunities for the internship to take place in our plants located in Iowa, Tennessee, Oklahoma, or Massachusetts. These sites produce a full line of appliances including refrigerators, washers, dryers, ranges, ovens, dishwashers, and KitchenAid portables. Reliable transportation is required for travel to work daily as public transportation is not available. Learn more about our Manufacturing locations and the communities where we live & work here! Minimum requirements Intern project assignments are focused on our World Class Manufacturing methodology and could be in areas such as: * Lead automation projects related to process control, quality control, safety systems and vision systems * Design, develop, review and conduct coordination for test programs or components, small systems or processes, or materials taking into account customers, product performance, cost and quality requirements * Manage equipment / resource relocation projects which could include: redesign of current equipment or resources, working with suppliers to identify new equipment options and leading change management with impacted team members * Focus on cost-savings initiatives across a plant including: standardized work audits, Improving first pass yield and throughput, etc. * Learn and apply Lean Manufacturing tools to project(s) Minimum requirements * Pursuing bachelors degree with major in: Electrical Engineering, Controls Engineering, Automation Engineering, Robotics Engineering, Mechatronics Engineering or a related field * Pursuing a bachelor's degree with plans to graduate before or by May 2028 * Current cumulative GPA of 2.8 or higher * Must have indefinite US work authorization. Applicants who require visa sponsorship or work authorization now or in the future are not eligible for this program. Preferred skills and experiences * Strong enthusiasm for and knowledge of automation tools and technologies * Proven decision-making skills and ability to analyze and solve complex business problems through innovation and creativity * Ability to lead and work with teams to drive and achieve extraordinary results * Demonstrated maturity and confidence to effectively present ideas * Exceptional communication and interpersonal skills to build and maintain relationships in a culturally diverse environment * Self-discipline and ability to manage competing priorities Connect with us and learn more about Whirlpool Corporation See what it's like to work at Whirlpool by visiting Whirlpool Careers. Additional information about the company can be found on Facebook, Twitter, LinkedIn, Instagram and YouTube. Whirlpool Corporation is committed to equal employment opportunity and prohibits any discrimination on the basis of race or ethnicity, religion, sex, pregnancy, gender expression or identity, sexual orientation, age, physical or mental disability, veteran status, or any other category protected by applicable law.

Job Posting External Job Responsibilities: Under general supervision, the Co-Op will be assisting and supporting a Manufacturing Engineer of an assigned Plant with the following duties. Perform Time Studies Develop and perform process reviews. Review production problems and help Identify a solution. Develop, implement, and update documentation. Review or modify CAD drawings. Work closely with production employees to gather data. Job Qualifications: Must be pursuing a Bachelor's degree in Mechanical, Manufacturing, Industrial Engineering or related field. Good analytical and problem-solving skills required. Ability to communicate with a variety of levels of employees. Must have own means of reliable communication. Must be able to work onsite in a Mfg. Plant located in either New Bremen, New Knoxville, Minster, Celina, or Troy, Ohio.

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. **Job Posting External** We are seeking a skilled Manufacturing Engineer with expertise in laser and plasma cutting processes to join our team. This role is critical in optimizing production efficiency, ensuring quality standards, and supporting continuous improvement initiatives within our manufacturing operations. **Job Duties** + Develop, implement, and optimize laser and plasma cutting processes for metal fabrication. + Create and maintain process documentation, including work instructions and standard operating procedures. + Collaborate with design, production, and quality teams to ensure manufacturability and compliance with specifications. + Troubleshoot cutting equipment and process issues to minimize downtime and improve productivity. + Analyze production data to identify opportunities for cost reduction and efficiency improvements. + Support new product introduction and prototype development related to cutting operations. + Ensure adherence to safety standards and quality requirements. **Minimum Qualifications** + Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, or related field. + 3+ years of experience in manufacturing engineering, preferably with laser and plasma cutting processes. + Strong knowledge of CNC programming, cutting parameters, and material properties. + Familiarity with CAD/CAM software and ability to interpret technical drawings. + Excellent problem-solving skills and attention to detail. + Strong communication and teamwork abilities. **Preferred Qualifications** + Experience with lean manufacturing principles and continuous improvement methodologies. + Knowledge of automation and robotics integration in cutting processes. + Understanding of welding and secondary fabrication processes. **Work Authorization:** Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. **Compensation and Benefits:** Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. Job Posting External We are seeking a skilled Manufacturing Engineer with expertise in laser and plasma cutting processes to join our team. This role is critical in optimizing production efficiency, ensuring quality standards, and supporting continuous improvement initiatives within our manufacturing operations. Job Duties * Develop, implement, and optimize laser and plasma cutting processes for metal fabrication. * Create and maintain process documentation, including work instructions and standard operating procedures. * Collaborate with design, production, and quality teams to ensure manufacturability and compliance with specifications. * Troubleshoot cutting equipment and process issues to minimize downtime and improve productivity. * Analyze production data to identify opportunities for cost reduction and efficiency improvements. * Support new product introduction and prototype development related to cutting operations. * Ensure adherence to safety standards and quality requirements. Minimum Qualifications * Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, or related field. * 3+ years of experience in manufacturing engineering, preferably with laser and plasma cutting processes. * Strong knowledge of CNC programming, cutting parameters, and material properties. * Familiarity with CAD/CAM software and ability to interpret technical drawings. * Excellent problem-solving skills and attention to detail. * Strong communication and teamwork abilities. Preferred Qualifications * Experience with lean manufacturing principles and continuous improvement methodologies. * Knowledge of automation and robotics integration in cutting processes. * Understanding of welding and secondary fabrication processes. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities Nearest Major Market: Lima Nearest Secondary Market: Findlay Job Segment: Manufacturing Engineer, CNC, Forklift, Warehouse, Welding, Engineering, Manufacturing

:** Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. **Job Posting External** **TROY PLANT - Monday - Thursday 6:00 AM to 4:20 PM** **Job Duties** + Support current process technology and implement improvements to department/plant operations based upon manufacturing engineering analysis of existing operations compared to future requirements based on capacity, cost reduction, safety and/or risk avoidance opportunities. + Help to prepare project justification including recommendations, make-vs-buy analysis, layout, cost impact and schedule activities as required. Implementation of processes including equipment procurement, coordination of installation, process capability prove-out, training, process documentation, work standard measurement and production start-up. + Contribute to the product introduction process. + Review production problems as they are identified and implement solutions. Develop, implement and update documentation and training + Develop reports, project briefings and management presentations. Perform other duties as assigned. **Minimum Qualifications** + 8-15 years related experience + High School graduate or equivalent + Job requires employee to drive a personal vehicle to conduct company business < 20% per week (8 hours) and/or travel locally between company locations during scheduled workday. + Must demonstrate good communication skills amongst shop floor, support staff, and plant leadership. + Must be able to lead and execute small teams and projects. + Requires good organizational and interpersonal skills, and the ability to train others + Per 8-hour shift. Sit 8 hours and stand 0 hours. Typical office environment (low noise level, limited exposure hot/cold temperatures, dust, fumes, and vibrations). Regular interaction with others and performs a degree of independent work. Physical and mental demands are akin to the majority of office positions with prolonged periods of sitting and prolonged use of a computer/keyboard. Infrequent lifting, walking and climbing stairs. Occasional use of office equipment (copiers, printers, etc.). **Preferred Qualifications** + Certain technical skills and training such as CAD layout, geometric dimensioning and tolerance (GD&T), process capability theory and statistical process control (SPC) may be required. **Work Authorization:** Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. **Compensation and Benefits:** Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. Job Posting External TROY PLANT - Monday - Thursday 6:00 AM to 4:20 PM Job Duties * Support current process technology and implement improvements to department/plant operations based upon manufacturing engineering analysis of existing operations compared to future requirements based on capacity, cost reduction, safety and/or risk avoidance opportunities. * Help to prepare project justification including recommendations, make-vs-buy analysis, layout, cost impact and schedule activities as required. Implementation of processes including equipment procurement, coordination of installation, process capability prove-out, training, process documentation, work standard measurement and production start-up. * Contribute to the product introduction process. * Review production problems as they are identified and implement solutions. Develop, implement and update documentation and training * Develop reports, project briefings and management presentations. Perform other duties as assigned. Minimum Qualifications * 8-15 years related experience * High School graduate or equivalent * Job requires employee to drive a personal vehicle to conduct company business < 20% per week (8 hours) and/or travel locally between company locations during scheduled workday. * Must demonstrate good communication skills amongst shop floor, support staff, and plant leadership. * Must be able to lead and execute small teams and projects. * Requires good organizational and interpersonal skills, and the ability to train others * Per 8-hour shift. Sit 8 hours and stand 0 hours. Typical office environment (low noise level, limited exposure hot/cold temperatures, dust, fumes, and vibrations). Regular interaction with others and performs a degree of independent work. Physical and mental demands are akin to the majority of office positions with prolonged periods of sitting and prolonged use of a computer/keyboard. Infrequent lifting, walking and climbing stairs. Occasional use of office equipment (copiers, printers, etc.). Preferred Qualifications * Certain technical skills and training such as CAD layout, geometric dimensioning and tolerance (GD&T), process capability theory and statistical process control (SPC) may be required. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities Nearest Major Market: Dayton Nearest Secondary Market: Cincinnati Job Segment: Manufacturing Engineer, CAD, Drafting, Procurement, Warehouse, Engineering, Manufacturing, Operations

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. Job Posting External Job Duties Entry level technical resource dedicated to a process or production cell. Participate in Engineering design reviews for new and existing products. Work with Engineering to define work methods and work sequences in the development of new products and processes. Support daily shop floor operations, troubleshoot, and resolve production and quality issues, and implement process improvements. Perform analysis, data collection, and document operator standard work. Analyze, recommend, and implement layout and process flow improvements. Develop workstation and line layouts, balancing of work content, determination of labor requirements, material handling and storage solutions, process documentation, and operator training as needed. Perform other duties as assigned. Minimum Qualifications 0-4 years of related experience. High School diploma or equivalent is required. Must be mechanically inclined and have good computer skills, including experience with Microsoft Office and Mechanical Drawing Software. Good communication, problem solving, and interpersonal skills required. Per 8-hour shift. Sit 8 hours and stand 0 hours. Typical office environment (low noise level, limited exposure hot/cold temperatures, dust, fumes, and vibrations). Regular interaction with others and performs a degree of independent work. Physical and mental demands are akin to the majority of office positions with prolonged periods of sitting and prolonged use of a computer/keyboard. Infrequent lifting, walking and climbing stairs. Occasional use of office equipment (copiers, printers, etc.). Preferred Qualifications Additional skills and training may be required such as CNC programming, CAD layout, geometric dimensioning and tolerancing (G, D&T), Lean Manufacturing principles, PLC programming, robotics, electrical and electronic troubleshooting, process capability theory and statistical process control (SPC). Must exhibit good communication and interpersonal skills amongst shop floor and support staff. Execute tasks per direction given, team member for projects. Must have good hands on expertise in assigned manufacturing process. PLC programming and electrical troubleshooting skills are preferred. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

Whirlpool Corporation (NYSE: WHR) is a leading home appliance company, in constant pursuit of improving life at home. As the only major U.S.-based manufacturer of kitchen and laundry appliances, the company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including Whirlpool , KitchenAid , JennAir, Maytag , Amana, Brastemp , Consul , and InSinkErator . In 2024, the company reported approximately $17 billion in annual sales - close to 90% of which were in the Americas - 44,000 employees, and 40 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com. The Internship Program - May 2026 Start Date Manufacturing is at the heart of what we do at Whirlpool Corporation. Our 10-12 week Manufacturing Leadership Development Program (MLDP): Controls Engineering Track Internship focuses on World Class Manufacturing methodology, and internship experiences and projects could be in areas such as lean manufacturing, quality, automation, process engineering, and many more. Upon successful completion of the summer internship program, you may be considered for employment opportunities within the Full Time MLDP: Controls Engineering Track post-graduation. What we offer Competitive compensation Housing stipend Paid holidays Robust professional development and skill building opportunities Networking & exposure to senior leadership Community service experiences Social & recreational events Get to know more about our early career programs at ********************************************************** Program location This internship will take place at one of our North American plant locations. Many of our internships take place at our Ohio-based plant locations with potential opportunities for the internship to take place in our plants located in Iowa, Tennessee, Oklahoma, or Massachusetts. These sites produce a full line of appliances including refrigerators, washers, dryers, ranges, ovens, dishwashers, and KitchenAid portables. Reliable transportation is required for travel to work daily as public transportation is not available. Learn more about our Manufacturing locations and the communities where we live & work here! Minimum requirements Intern project assignments are focused on our World Class Manufacturing methodology and could be in areas such as: Lead automation projects related to process control, quality control, safety systems and vision systems Design, develop, review and conduct coordination for test programs or components, small systems or processes, or materials taking into account customers, product performance, cost and quality requirements Manage equipment / resource relocation projects which could include: redesign of current equipment or resources, working with suppliers to identify new equipment options and leading change management with impacted team members Focus on cost-savings initiatives across a plant including: standardized work audits, Improving first pass yield and throughput, etc. Learn and apply Lean Manufacturing tools to project(s) Minimum requirements Pursuing bachelors degree with major in: Electrical Engineering, Controls Engineering, Automation Engineering, Robotics Engineering, Mechatronics Engineering or a related field Pursuing a bachelor's degree with plans to graduate before or by May 2028 Current cumulative GPA of 2.8 or higher Must have indefinite US work authorization. Applicants who require visa sponsorship or work authorization now or in the future are not eligible for this program. Preferred skills and experiences Strong enthusiasm for and knowledge of automation tools and technologies Proven decision-making skills and ability to analyze and solve complex business problems through innovation and creativity Ability to lead and work with teams to drive and achieve extraordinary results Demonstrated maturity and confidence to effectively present ideas Exceptional communication and interpersonal skills to build and maintain relationships in a culturally diverse environment Self-discipline and ability to manage competing priorities Connect with us and learn more about Whirlpool Corporation See what it's like to work at Whirlpool by visiting Whirlpool Careers. Additional information about the company can be found on Facebook, Twitter, LinkedIn, Instagram and YouTube. Whirlpool Corporation is committed to equal employment opportunity and prohibits any discrimination on the basis of race or ethnicity, religion, sex, pregnancy, gender expression or identity, sexual orientation, age, physical or mental disability, veteran status, or any other category protected by applicable law.

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** At Avery Dennison, some of the great benefits we provide are: Health & wellness benefits starting on day 1 of employment Paid parental leave 401K eligibility Tuition reimbursement Employee Assistance Program eligibility / Health Advocate Paid vacation and paid holidays Job Description The Avery Dennison Identification Solutions group is looking for an Engineer to join the Manufacturing Engineering team at our site in Miamisburg, Ohio. As a Manufacturing Engineer, you will have the opportunity to lead and execute cost savings projects that are directly tied to key strategic goals for the business. Roles and Responsibilities As an Manufacturing Engineer, you will have the opportunity to make an impact by: Promoting safety as the most important value in the organization by contributing through training, process improvement and other environmental, health, and safety responsibilities Documenting standard processes and procedures for implementation and training Developing and implementing production/processing methods and controls to meet quality standards in the most cost efficient manner. Providing support to manufacturing to resolve production and quality issues that arise on a day-to-day basis Working with machine repair team members to analyze root cause and define corrective actions for future preventive maintenance Conducting technical inspections of complex machines Recommending and implementing improvements and/or modifications in sequence of operations, equipment utilization, and related matters Evaluating and approving design changes, specifications and drawing releases Partnering with the Manufacturing Engineering Manager to develop and execute projects that are a part of the Identifications Enterprise Lean Sigma journey Managing special projects; which could include supplier relationships, production performance management, sustainability, and other ad hoc projects Setting project schedules by monitoring project progress, coordinating activities, and solving problems Defining requirements for new equipment validation run-off Preparing new machines and production equipment for operation Optimizing direct and indirect manufacturing labor and in-plant material flow through the use of industrial engineering methods including line balancing, time studies, as well as both in-plant and external material flow Designing and planning equipment layouts Qualifications To set you up for success in this role, Avery Dennison requires the following qualifications: Bachelor's Degree in related field (Engineering, Mechanical/Industrial) or 2-4 years of experience in an engineering function in a manufacturing environment Knowledgeable in Electronic Systems (wire diagrams, schematics, PLC logic .. ect.) Knowledgeable in Mechanical Systems (Cams, Torque requirements, ect.) Excellent math and analytical skills Excellent communication and organization skills with an emphasis on detail Understanding of process documentation and improvement Proficiency with applicable computer systems, such as Microsoft Office and Google Apps (mail, docs, sheets, slides, forms) Additional qualifications that could help you succeed in this role are as follows: Working experience in Oracle E-Business Suite R12 Proficient creating 3D models and 2D prints using Solidworks or related CAD software. Proficient in AutoCAD 2D for facility layout planning High-energy, self-directed, self-starter Ability to execute multiple projects with minimal supervision Ability to work comfortably in a dynamic, fast-paced, and matrixed organization Ability to communicate effectively with cross-functional groups to define and execute overall requirements Additional Information All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or [email protected] to discuss reasonable accommodations.

The Avery Dennison Identification Solutions group is looking for an Engineer to join the Manufacturing Engineering team at our site in Miamisburg, Ohio. As a Manufacturing Engineer, you will have the opportunity to lead and execute cost savings projects that are directly tied to key strategic goals for the business. Roles and Responsibilities As an Manufacturing Engineer, you will have the opportunity to make an impact by: * Promoting safety as the most important value in the organization by contributing through training, process improvement and other environmental, health, and safety responsibilities * Documenting standard processes and procedures for implementation and training * Developing and implementing production/processing methods and controls to meet quality standards in the most cost efficient manner. * Providing support to manufacturing to resolve production and quality issues that arise on a day-to-day basis * Working with machine repair team members to analyze root cause and define corrective actions for future preventive maintenance * Conducting technical inspections of complex machines * Recommending and implementing improvements and/or modifications in sequence of operations, equipment utilization, and related matters * Evaluating and approving design changes, specifications and drawing releases * Partnering with the Manufacturing Engineering Manager to develop and execute projects that are a part of the Identifications Enterprise Lean Sigma journey * Managing special projects; which could include supplier relationships, production performance management, sustainability, and other ad hoc projects * Setting project schedules by monitoring project progress, coordinating activities, and solving problems * Defining requirements for new equipment validation run-off * Preparing new machines and production equipment for operation * Optimizing direct and indirect manufacturing labor and in-plant material flow through the use of industrial engineering methods including line balancing, time studies, as well as both in-plant and external material flow * Designing and planning equipment layouts To set you up for success in this role, Avery Dennison requires the following qualifications: * Bachelor's Degree in related field (Engineering, Mechanical/Industrial) or 2-4 years of experience in an engineering function in a manufacturing environment * Knowledgeable in Electronic Systems (wire diagrams, schematics, PLC logic .. ect.) * Knowledgeable in Mechanical Systems (Cams, Torque requirements, ect.) * Excellent math and analytical skills * Excellent communication and organization skills with an emphasis on detail * Understanding of process documentation and improvement * Proficiency with applicable computer systems, such as Microsoft Office and Google Apps (mail, docs, sheets, slides, forms) Additional qualifications that could help you succeed in this role are as follows: * Working experience in Oracle E-Business Suite R12 * Proficient creating 3D models and 2D prints using Solidworks or related CAD software. * Proficient in AutoCAD 2D for facility layout planning * High-energy, self-directed, self-starter * Ability to execute multiple projects with minimal supervision * Ability to work comfortably in a dynamic, fast-paced, and matrixed organization * Ability to communicate effectively with cross-functional groups to define and execute overall requirements All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or ********************************** to discuss reasonable accommodations.

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** At Avery Dennison, some of the great benefits we provide are: Health & wellness benefits starting on day 1 of employment Paid parental leave 401K eligibility Tuition reimbursement Employee Assistance Program eligibility / Health Advocate Paid vacation and paid holidays Job Description The Avery Dennison Identification Solutions group is looking for an Engineer to join the Manufacturing Engineering team at our site in Miamisburg, Ohio. As a Manufacturing Engineer, you will have the opportunity to lead and execute cost savings projects that are directly tied to key strategic goals for the business. Roles and Responsibilities As an Manufacturing Engineer, you will have the opportunity to make an impact by: Promoting safety as the most important value in the organization by contributing through training, process improvement and other environmental, health, and safety responsibilities Documenting standard processes and procedures for implementation and training Developing and implementing production/processing methods and controls to meet quality standards in the most cost efficient manner. Providing support to manufacturing to resolve production and quality issues that arise on a day-to-day basis Working with machine repair team members to analyze root cause and define corrective actions for future preventive maintenance Conducting technical inspections of complex machines Recommending and implementing improvements and/or modifications in sequence of operations, equipment utilization, and related matters Evaluating and approving design changes, specifications and drawing releases Partnering with the Manufacturing Engineering Manager to develop and execute projects that are a part of the Identifications Enterprise Lean Sigma journey Managing special projects; which could include supplier relationships, production performance management, sustainability, and other ad hoc projects Setting project schedules by monitoring project progress, coordinating activities, and solving problems Defining requirements for new equipment validation run-off Preparing new machines and production equipment for operation Optimizing direct and indirect manufacturing labor and in-plant material flow through the use of industrial engineering methods including line balancing, time studies, as well as both in-plant and external material flow Designing and planning equipment layouts Qualifications To set you up for success in this role, Avery Dennison requires the following qualifications: Bachelor's Degree in related field (Engineering, Mechanical/Industrial) or 2-4 years of experience in an engineering function in a manufacturing environment Knowledgeable in Electronic Systems (wire diagrams, schematics, PLC logic .. ect.) Knowledgeable in Mechanical Systems (Cams, Torque requirements, ect.) Excellent math and analytical skills Excellent communication and organization skills with an emphasis on detail Understanding of process documentation and improvement Proficiency with applicable computer systems, such as Microsoft Office and Google Apps (mail, docs, sheets, slides, forms) Additional qualifications that could help you succeed in this role are as follows: Working experience in Oracle E-Business Suite R12 Proficient creating 3D models and 2D prints using Solidworks or related CAD software. Proficient in AutoCAD 2D for facility layout planning High-energy, self-directed, self-starter Ability to execute multiple projects with minimal supervision Ability to work comfortably in a dynamic, fast-paced, and matrixed organization Ability to communicate effectively with cross-functional groups to define and execute overall requirements Additional Information All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact (440) ###-#### or [email protected] to discuss reasonable accommodations. Videos To Watch

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. Advanced Manufacturing Engineer- Strategy Group Responsibilities: Work in a team environment to develop and foster future global manufacturing discussions. This position will provide manufacturing expertise in future planning. Develop current and future state analysis for global manufacturing and demonstrate a strong commitment towards innovative approaches supporting company objectives, then present out findings to leadership. Develop business cases feasibility studies for new truck/component manufacturing locations, vertical integration opportunities, and transfers manufacturing locations. Possess strong analytical ability to gather large amounts of data and present out findings in a summary view using a visual and concise approach such as dashboards. Responsible for Global SharePoint updates and changes. Lead cross functional teams for Future Facility Discussions with all global manufacturing plants. Lead cross-functional teams in all aspects of projects including research and design, capital request, project planning, and manufacturing implementation. Project Management of large global manufacturing projects Create, set, and give direction for strategic initiatives. Develop tools and methods to foster strategic discussions. Develop/mentor other Mfg. Engineers (may not work directly for AME) Support of manufacturing operations to grow Crown per direction of Mfg. Leadership. Support implement Crown Culture and visual management tools to sustain operations. Support other projects as needed. This position reports to the AME Manager. Qualifications: 8-15 years related experience Bachelor's degree in manufacturing, Mechanical, Industrial Engineering or related Non-degree considered if 12+ years of related experience along with a high school diploma or GED Frequent travel (6-20%). Preferred Qualifications: Bachelor's Degree in manufacturing, Mechanical, Industrial Engineering 10 years in a manufacturing or project management role. Ability to support multiple projects at once. Strong background in SAP Crown 360 system for process/part data information gathering. AutoCAD 2D and 3D Sketchup layouts, 3D process simulation, Power BI, Microsoft Project, and Project Management methodology. Organizational skills Good interpersonal skills to develop relationships with global manufacturing plants, product development and marketing/sales. Extensive knowledge of multiple manufacturing processes and system flows Excellent leadership and coaching skills Demonstrated analytical and decision-making skills. Outstanding communication and presentation skills to facilitate discussions with a wide variety of personnel at various levels of the organization. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. Advanced Manufacturing Engineer- Metal Cutting and Forming Responsibilities: This position will provide critical input in creating an enterprise strategy for development and implementation of steel cutting and forming processes across Crown's global manufacturing facilities. A strong commitment towards support of company goals and objectives through innovative approach, lean principals, and leverage of advancing technologies are required. Research current and advanced manufacturing technologies and lead the transfer to improve operations. Develop detailed business cases for short and long-term strategic manufacturing and capital plans, plant or corporate, and present them to the leadership team. Work with cross-functional teams to develop digital work aids within the fabrication processes. Work with plant teams (Mfg. Engineering, Quality, Safety…) to review production problems as they are identified and implement solutions. Maintain a relationship with equipment suppliers and stay informed on new and innovative technology in the industry. Manage medium to large projects. Mentor, coach, teach, and develop Manufacturing Engineers and Process Technicians. This position will report to an Advanced Manufacturing Engineering Manager. Qualifications: 8-15 years of related experience Bachelor's degree (non-degree 15+ years of related experience) Valid driving privileges Frequent travel (6-20%) Frequent overnight stays (6-20%) Preferred Qualifications: Knowledge of fabrication processes and equipment and lean principals. Laser Cutting, Plasma, Forming, Stamping, Drawing CAD experience (AutoCAD, SketchUp, NX, ext.) Excellent leadership and coaching skills. Demonstrated analytical and decision-making skills. Outstanding communication skills to facilitate discussions at all levels of the company. Self-driven with the ability to support multiple projects at once. Must be willing and able to travel, including internationally. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** Job Description As a Process Engineer, you will be responsible for reducing product and process variation through the use of Six Sigma / statistical tools and the implementation or improvement of existing procedures and process controls. In this critical role, you will also be responsible for: Support day to day product and process operations for coating and compounding assets in a 24/7 manufacturing environment. Be a business partner to the site leadership team Identify & analyze production problems using Six Sigma methodologies to control & improve manufacturing processes. Loss reduction & continuous improvement in coating line productivity & product quality through the use of problem solving, Six Sigma & project management skills. Continually improve & optimize current products through variation reduction. Provide support for new product development and material changes as they arise by interacting with and being a member of Marketing and R&D teams. Develop control strategies for sustaining all continuous improvement projects. Initiate, manage & participate in safety, quality, cost & process improvement projects. Provide ongoing process evaluation-including trials & capability studies. Implementation of new equipment & operating procedures. Mentoring other process engineers and operations personnel. Developing and implementing technical training. Scoping and executing capital projects Participating, leading and sponsoring various task teams. Assisting in the development of long-term strategies. Qualifications Essential: Experience with statistical analysis, statistical process controls, SPC, DOE, FMEA, and MSE. Ability to develop, implement, monitor, measure, and control functional improvement plans. Problem solving, decision analysis, situation appraisal skills. Strong project management skills and ability to manage multiple concurrent priorities. Preferred: Experience with Controls, instrumentation, PLC knowledge also a plus. Experience in a 24/7 environment is preferred. Knowledge in PSM processes is a plus. Previous experience with PSA / web based processes. Web handling experience. Education: BS Degree in mechanical or chemical engineering from an accredited college or university, or Associates in mechanical or chemical engineering technology with 5+ years of industry experience is required. Excellent verbal and written communication skills including the ability to communicate and develop influential relationships at multiple levels within an organization, and lead in a positive and collaborative manner Ability to influence others. Approachable, effective in giving/receiving feedback. Strong presentation and facilitation skills. Strong PC skills - MS Office / Google platforms, Lotus Notes, MINITAB, AutoCAD, Inventor/SolidWorks, QSI and QIS experience a plus. Previous ISO 9001-2000 experience with implementation, improvement, and sustainment. Previous Six Sigma exposure/experience. Green Belt / Black Belt certification is a plus. Minimum of 2 years of experience in operations, engineering, or a related field, including co-op and internship experience. Flexibility on work hours (on call after hours/weekend as needed) Additional Information The salary range for this position is $82175 - $100,300/ year. The hiring base salary range above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range, and in some circumstances may be above or below the range, based on various factors including but not limited to a candidate's relevant skills, experience, education and training, and location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position, which may change depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable law. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or [email protected] to discuss reasonable accommodations.

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** Job Description As a Process Engineer, you will be responsible for reducing product and process variation through the use of Six Sigma / statistical tools and the implementation or improvement of existing procedures and process controls. In this critical role, you will also be responsible for: + Support day to day product and process operations for coating and compounding assets in a 24/7 manufacturing environment. + Be a business partner to the site leadership team + Identify & analyze production problems using Six Sigma methodologies to control & improve manufacturing processes. + Loss reduction & continuous improvement in coating line productivity & product quality through the use of problem solving, Six Sigma & project management skills. + Continually improve & optimize current products through variation reduction. + Provide support for new product development and material changes as they arise by interacting with and being a member of Marketing and R&D teams. + Develop control strategies for sustaining all continuous improvement projects. + Initiate, manage & participate in safety, quality, cost & process improvement projects. + Provide ongoing process evaluation-including trials & capability studies. + Implementation of new equipment & operating procedures. + Mentoring other process engineers and operations personnel. + Developing and implementing technical training. + Scoping and executing capital projects + Participating, leading and sponsoring various task teams. + Assisting in the development of long-term strategies. Qualifications + Essential: + Experience with statistical analysis, statistical process controls, SPC, DOE, FMEA, and MSE. + Ability to develop, implement, monitor, measure, and control functional improvement plans. + Problem solving, decision analysis, situation appraisal skills. + Strong project management skills and ability to manage multiple concurrent priorities. + Preferred: + Experience with Controls, instrumentation, PLC knowledge also a plus. + Experience in a 24/7 environment is preferred. + Knowledge in PSM processes is a plus. + Previous experience with PSA / web based processes. + Web handling experience. + Education: + BS Degree in mechanical or chemical engineering from an accredited college or university, or Associates in mechanical or chemical engineering technology with 5+ years of industry experience is required. + + Excellent verbal and written communication skills including the ability to communicate and develop influential relationships at multiple levels within an organization, and lead in a positive and collaborative manner + Ability to influence others. + Approachable, effective in giving/receiving feedback. + Strong presentation and facilitation skills. + Strong PC skills - MS Office / Google platforms, Lotus Notes, MINITAB, AutoCAD, Inventor/SolidWorks, QSI and QIS experience a plus. + Previous ISO 9001-2000 experience with implementation, improvement, and sustainment. + Previous Six Sigma exposure/experience. Green Belt / Black Belt certification is a plus. + Minimum of 2 years of experience in operations, engineering, or a related field, including co-op and internship experience. + Flexibility on work hours (on call after hours/weekend as needed) Additional Information The salary range for this position is $82175 - $100,300/ year. The hiring base salary range above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range, and in some circumstances may be above or below the range, based on various factors including but not limited to a candidate's relevant skills, experience, education and training, and location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position, which may change depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable law. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or ********************************** to discuss reasonable accommodations. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** At Avery Dennison, some of the great benefits we provide are: Health & wellness benefits starting on day 1 of employment Paid parental leave 401K eligibility Tuition reimbursement Employee Assistance Program eligibility / Health Advocate Paid vacation and paid holidays Job Description As a Process Engineer, you will be responsible for reducing product and process variation through the use of Six Sigma / statistical tools and the implementation or improvement of existing procedures and process controls. In this critical role, you will also be responsible for: Support day to day product and process operations for coating and compounding assets in a 24/7 manufacturing environment. Be a business partner to the site leadership team Identify & analyze production problems using Six Sigma methodologies to control & improve manufacturing processes. Loss reduction & continuous improvement in coating line productivity & product quality through the use of problem solving, Six Sigma & project management skills. Continually improve & optimize current products through variation reduction. Provide support for new product development and material changes as they arise by interacting with and being a member of Marketing and R&D teams. Develop control strategies for sustaining all continuous improvement projects. Initiate, manage & participate in safety, quality, cost & process improvement projects. Provide ongoing process evaluation-including trials & capability studies. Implementation of new equipment & operating procedures. Mentoring other process engineers and operations personnel. Developing and implementing technical training. Scoping and executing capital projects Participating, leading and sponsoring various task teams. Assisting in the development of long-term strategies. Qualifications Essential: Experience with statistical analysis, statistical process controls, SPC, DOE, FMEA, and MSE. Ability to develop, implement, monitor, measure, and control functional improvement plans. Problem solving, decision analysis, situation appraisal skills. Strong project management skills and ability to manage multiple concurrent priorities. Excellent verbal and written communication skills including the ability to communicate and develop influential relationships at multiple levels within an organization, and lead in a positive and collaborative manner Ability to influence others. Approachable, effective in giving/receiving feedback. Strong presentation and facilitation skills. Strong PC skills - MS Office / Google platforms, Lotus Notes, MINITAB, AutoCAD, Inventor/SolidWorks, QSI and QIS experience a plus. Previous ISO 9001-2000 experience with implementation, improvement, and sustainment. Previous Six Sigma exposure/experience. Green Belt / Black Belt certification is a plus. Minimum of 2 years of experience in operations, engineering, or a related field, including co-op and internship experience. Flexibility on work hours (on call after hours/weekend as needed) Preferred: Experience with Controls, instrumentation, PLC knowledge also a plus. Experience in a 24/7 environment is preferred. Knowledge in PSM processes is a plus. Previous experience with PSA / web based processes. Web handling experience. Education: BS Degree in mechanical or chemical engineering from an accredited college or university, or Associates in mechanical or chemical engineering technology with 5+ years of industry experience is required. Additional Information The salary range for this position is $82175 - $100,300/ year. The hiring base salary range above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range, and in some circumstances may be above or below the range, based on various factors including but not limited to a candidate's relevant skills, experience, education and training, and location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position, which may change depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable law. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or [email protected] to discuss reasonable accommodations.

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** At Avery Dennison, some of the great benefits we provide are: + Health & wellness benefits starting on day 1 of employment + Paid parental leave + 401K eligibility + Tuition reimbursement + Employee Assistance Program eligibility / Health Advocate + Paid vacation and paid holidays Job Description As a Process Engineer, you will be responsible for reducing product and process variation through the use of Six Sigma / statistical tools and the implementation or improvement of existing procedures and process controls. In this critical role, you will also be responsible for: + Support day to day product and process operations for coating and compounding assets in a 24/7 manufacturing environment. + Be a business partner to the site leadership team + Identify & analyze production problems using Six Sigma methodologies to control & improve manufacturing processes. + Loss reduction & continuous improvement in coating line productivity & product quality through the use of problem solving, Six Sigma & project management skills. + Continually improve & optimize current products through variation reduction. + Provide support for new product development and material changes as they arise by interacting with and being a member of Marketing and R&D teams. + Develop control strategies for sustaining all continuous improvement projects. + Initiate, manage & participate in safety, quality, cost & process improvement projects. + Provide ongoing process evaluation-including trials & capability studies. + Implementation of new equipment & operating procedures. + Mentoring other process engineers and operations personnel. + Developing and implementing technical training. + Scoping and executing capital projects + Participating, leading and sponsoring various task teams. + Assisting in the development of long-term strategies. Qualifications Essential: + Experience with statistical analysis, statistical process controls, SPC, DOE, FMEA, and MSE. + Ability to develop, implement, monitor, measure, and control functional improvement plans. + Problem solving, decision analysis, situation appraisal skills. + Strong project management skills and ability to manage multiple concurrent priorities. + Excellent verbal and written communication skills including the ability to communicate and develop influential relationships at multiple levels within an organization, and lead in a positive and collaborative manner + Ability to influence others. + Approachable, effective in giving/receiving feedback. + Strong presentation and facilitation skills. + Strong PC skills - MS Office / Google platforms, Lotus Notes, MINITAB, AutoCAD, Inventor/SolidWorks, QSI and QIS experience a plus. + Previous ISO 9001-2000 experience with implementation, improvement, and sustainment. + Previous Six Sigma exposure/experience. Green Belt / Black Belt certification is a plus. + Minimum of 2 years of experience in operations, engineering, or a related field, including co-op and internship experience. + Flexibility on work hours (on call after hours/weekend as needed) Preferred: + Experience with Controls, instrumentation, PLC knowledge also a plus. + Experience in a 24/7 environment is preferred. + Knowledge in PSM processes is a plus. + Previous experience with PSA / web based processes. + Web handling experience. Education: + BS Degree in mechanical or chemical engineering from an accredited college or university, or Associates in mechanical or chemical engineering technology with 5+ years of industry experience is required. Additional Information The salary range for this position is $82175 - $100,300/ year. The hiring base salary range above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range, and in some circumstances may be above or below the range, based on various factors including but not limited to a candidate's relevant skills, experience, education and training, and location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position, which may change depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable law. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or ********************************** to discuss reasonable accommodations. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled