Customer quality engineer entry level jobs - 47 jobs

The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations - with an unrivaled record of on time and on (or under) budget deliveries. SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we're applying this tenacity and expertise to the U.S. Air Force's (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you're passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here. Are you looking to use your expert quality and leadership skills in an industry that supports and protects explorers and heroes? We could use your expertise on our team! As a Quality Manager, you'll develop, modify, apply and maintain quality evaluation, control systems, and protocols for processing materials into partially finished or finished materials product while ensuring efficient conformance to industry standards and compliance to regulatory requirements. You'll be using your skills and expertise to devise and implement methods and procedures for auditing and evaluating the accuracy of our processes, products and systems. You'll ensure that corrective measures and deviation meet acceptable reliability standards and that documentation is compliant with requirements. Your responsibilities will include developing, applying, and maintaining our quality systems and protocols necessary to ensure efficient conformance and compliance. Roles & Responsibilities: Lead continuous improvement initiatives using methodologies such as Six Sigma, Lean, and root cause analysis to enhance product quality and operational efficiency. Participate in program reviews and provide input on quality-related issues. Monitor key performance indicators (KPIs) related to product quality and process efficiency. Use data and metrics to identify trends, drive improvements, and report on the effectiveness of quality initiatives. Maintain accurate and detailed records of quality assurance activities, including test results, inspection reports, and audit findings. Prepare and present regular reports on quality metrics and performance Qualifications You Must Have: Bachelor's degree in a related field of study Relevant work experience may substitute for required education Typically, 6+ years of progressive quality assurance experience, which includes 0-2+ years of management experience. Direct Aviation/Aerospace operations experience In-depth knowledge of ISO 9001/AS9100 and CMMI standards Experience in an electronic/mechanical systems environment Must have direct quality engineering management experience Must have working knowledge on Catia, Model Based System Engineering (MBSE) and GD&T The ability to obtain and maintain a Secret U.S. Security Clearance is required Qualifications We Prefer: Experience in a manufacturing environment Attainment of Six Sigma Black Belt Certified Manager of Quality / Organizational Excellence Certified Quality Improvement Associate Certified Quality Auditor This posting will be open for application for a minimum of 5 days and may be extended based on business needs. SNC offers annual incentive pay based upon performance that is commensurate with the level of the position. SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more. IMPORTANT NOTICE: This position requires the ability to obtain and maintain a Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use. Learn more about the background check process for Security Clearances. SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We're known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation's most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team! SNC is an Equal Opportunity Employer committed to an environment free of discrimination. Employment decisions are made based on merit without regard to race, color, age, religion, sex, national origin, disability, status as a protected veteran or other characteristics protected by law.

Job Title: Quality Manager Department: Training Department Location: Companywide Reports to Director of Training Company Overview: GridHawk LLC (************************* is a premier provider of utility locating and other damage prevention services. Our mission is to keep communities safe by preventing damage to underground infrastructure. We provide full-spectrum outsourced asset damage-prevention and mitigation services and solutions on behalf of utility companies. Our rapidly expanding geographic presence currently encompasses the states of Alabama, Illinois, Indiana (operational headquarters), Kentucky, Michigan, Missouri, New Jersey, Ohio, Oklahoma, Pennsylvania, Texas and Virginia (could expand into other states). GridHawk is led by a seasoned team of utility locating industry executives who collectively hold a best-in-class track record for safety and on-time performance. Also supporting our mission is an array of advanced technology, the centerpiece of which is our proprietary Keystone 811 ticket routing and workforce management system. We strive to build long-term relationships with safety focused customers who expect industry-leading service and performance. Job Summary: Primary Duties & Responsibilities will include but are not limited to: Oversees Reporting and training of 1. AFAM & RCA a. Improve and track At Fault Analysis Metric (AFAM) b. Root Cause Analysis (RCA) Tracking c. Find trends and close the loop. 2. Oversee and track Damage Investigating and Claims a. Review, Follow-up b. Certify and Train Investigation process. c. Damage reporting oversight d. Assist with AF Damage calls e. Report tracking 3. Continuous Quality Process Enhancements a. Define areas of improvement. b. Implement changes & additions through new or improved processes & training c. Follow-up 4. Training- Train the trainer a. Assist with Process training- Equipment, Locate Theory etc. b. Ensure Completeness and consistency throughout footprint c. Validate and Request Enhancements of current training d. Attending/assisting with training classes to evaluate and coach the trainers, identify gaps, and suggest solutions. 5. Audits & Tasks- Operational Excellence a. Audit and Task reporting b. Trends & Follow up (Data Tracking): ➢ Are technicians learning from process? ➢ Are Auditors completing the audit/follow-up properly? c. Close the loop to additional training. Data Tracking of: ➢ Employees that seem to have trouble with o Skill- Understanding equipment, prints, ticket, scope, etc. o Process- Level-up, corner lot etc. 6. Close the loop. a. Recognize trends. b. Request new content. c. Request content adjustment d. Ensure internal compliance. Qualifications / Job Requirements: • Travel 25 to 50% of the time is a requirement of this position. • May need to acquire Evaluator Certifications with MEA, ITS and/or EWN for those clients that allow in-house OQ evaluations. • Excellent communication skills needed. • Ability to read and interpret prints at a high level. • Ability to teach and demonstrate proper techniques. • Excellent Quality Record • Proficient in Gas and Electric training • High School Diploma or equivalency (GED) • Documentation of excellent quality ratio within locating industry. • Pass a Background screening (no violations within the last 5 years) • Pass a DOT drug test (ongoing). Physical and Safety Requirements • Ability to lift over 50 lbs. • Ability to walk/stand for multiple hours a day. • Reasonable accommodation can be made to enable individuals with disabilities to perform essential job functions. Benefits: All employees are eligible to receive some form of company benefits. All benefits are available to regular, full-time employees who maintain an average of 30 hours worked per week. Qualifying employees can enjoy paid holidays and PTO. Health benefits will be available from the first of the next month following 30 days of employment. The 401k and matching program are available after their 90-day introductory period. • Health Insurance • Dental Insurance • Term life Insurance • Short-Term Disability • Long-Term Disability • Vision Insurance • Flexible Benefits Plan • 401(k) Savings Plan (Matched by the company) All employees of GridHawk LLC, are assigned proper technology to perform all work-related duties. We will provide you with the tools you need to achieve including: • Company vehicle • Laptop • Smartphone GridHawk LLC is an equal opportunity employer. All employees could advance within the company. ***To obtain employment with GridHawk LLC, candidates MUST complete a background check and MVR. Company policy requires no violations within the last 5 years. Candidates MUST pass a drug test. **

The Quality Manager provides customer-and factory-facing quality support for contract manufacturing of medical device components at a specific Resonetics site. The position includes managing the interface between Resonetics and customers' supplier quality organization, assisting with transition and sustaining of manufacturing processes, and support for supplier quality management. The Quality Manager also acts as the lead person for a manufacturing site for all Quality and Regulatory matters and supervises other quality personnel on site. The Quality Manager oversees the site Quality department budget, Quality personnel hiring for the site, and establishes site-level policies to comply with Resonetics-wide directives. The Quality Manager is responsible for implementing new and revised corporate quality systems documents. The Quality Manager is the Resonetics site Management Representative and leads facilitation of external audits. The Quality Manager position uses Quality Engineering techniques including: Problem solving using Lean Six Sigma methodology, Process Validations, Process Development and optimization, Gage R&R, reducing dependence on inspection, and ISO compliance. Responsibilities Performs and supports the work using quality risk management principles and their application to medical device manufacturing. Liaising with customer quality personnel to resolve issues and Customer Complaints Monitoring and disseminating customer quality report cards Generating process deviations, validation protocols and reports Generating Customer Change Notices Assisting with troubleshooting of production and process development processes Leading development of metrology equipment Developing and maintaining quality/control plans Developing PFMECAs Specifying metrology equipment Conducting Gage R&R studies Resolving Corrective and Preventive Actions Developing Quality Procedures and ensure training of personnel Approving Nonconformance disposition Analyzing production and validation data Working on continual improvement and process assessment projects as assigned Supervising quality department for a site Required Qualifications Minimum 8 years' experience in a Quality Engineering role for a medical device manufacturer and/or start-up company, or equivalent engineering experience Demonstrated technical writing and communication skills. Have proven experience leading the facilitation of external audits Working knowledge of 21 CFR Part 820 and/or ISO 13485 compliance Working knowledge of Statistical software and/or Minitab Bachelor's degree or equivalent experience Prior supervisory experience Preferred Qualifications Prior engineering management experience CMQOE, CQE and/or Six Sigma Green or Black belt Bachelor's degree in engineering/science discipline Physical Demands Position may include up to 10% domestic and international travel Compensation The compensation for this role is competitive and will be based on experience and qualifications. The anticipated range is $105,000 - $130,000. For temp, temp-to-hire, and regular full-time positions, our company policy is that we are unable to provide visa sponsorship. Candidates must already be legally authorized to work in the United States without the need for sponsorship now or in the future.

Title: Quality Manager Department: Quality Control Reports To: General Manager Classification: Exempt Duties & Responsibilities Improve product quality through effective problem solving Implement corrective actions that lead to continual improvement projects in each department Use corrective actions that are sustainable to resolve process defects and customer quality issues Collect, analyze, and report real time data related to defect improvement projects Monitor incoming material quality Provide support to the production team in the implementation of quality improvement projects Assist in maintaining the company ISO9001:2015 Quality Management System certification Train and oversee internal auditors Manage NCMRs (Nonconforming material report) and CARs (corrective action report) Responsible for tracking problems during and after shipment Apply Root Cause analysis skills in developing effective solutions Drive COQ (Cost of quality) metrics to determine impact on the company Required Skills & Abilities Proven experience as a quality inspector or relevant role Familiarity with quality testing machines and systems Thorough knowledge of quality control standards and testing methodologies Proficient with Microsoft Office Advanced skills in SharePoint Knowledge of pertinent industry standards and their application to production Minimum Education College Minimum Years of Experience 4-6 Specific Qualifications Education & Experience Bachelor's Degree in Electrical Engineering preferred Five years' experience in a Quality Engineering ASQ: CQE or CRE Certified ISO9001:2015 Internal Auditor or Lead Auditor Adobe: Automated forms developer Knowledgeable in UL/IEEE/CSA Industrial standards Trained in Six Sigma & Lean desired but not required Physical Requirements Ability to lift 25 lbs. Tolerance for production environment Prolonged periods of sitting License Required No Job Locations US-OH-Canton Company Overview Why IES Infrastructure? IES Infrastructure offers competitive salaries. But, if you make your employment decision based on salary only, you're overlooking other significant factors - work environment and employee benefits. We offer a friendly, team-work environment with opportunities for continuous development and career advancement. We also offer a comprehensive benefits package that provides real protection for you and your family. Health & dental insurance Group life & accidental death & dismemberment insurance Supplemental life insurance Voluntary accident insurance Company Paid Disability insurance (short and long-term) Vacation and holidays 401k Company Culture Commitment to Excellence - Consistently exceeds expectations. Honesty and Integrity - Strive to do what is right and do what we say we will do. Safety - Create a safe working environment in all operating locations. Respect -Honor the rights of all involved. Communication - Communicate clearly and directly with all involved. Employee Satisfaction - Create employee opportunities for growth and development. Innovation and Creativity - Apply creative ingenuity to make us better, faster, and first. Resiliency - No obstacle will stop us from accomplishing our goals. Teamwork - Above all else, work together as one team and one group of professionals. All positions require customer focus with a service-oriented attitude as well as attention to detail with excellent verbal and written communication skills. Ability to adapt to changes in daily activities is essential. Ability to travel and work overtime/weekends, as needed, to meet customer and in-house demands. All applicants must pass a background check and drug/alcohol screening and must have a clean driving record. EEO Statement PLEASE NO AGENCY CALLS. NOTE TO ALL AGENCIES: Any unsolicited agency resumes or agency represented candidates that are presented to any IES employee without first having a signed contract between that agency and the IES Talent Acquisition organization will become the property of IES and no fees will be paid. EEO & Affirmative Action The IES policy on equal employment opportunity prohibits discrimination based on race, color, religion, national origin, sex, age, gender identity, sexual orientation, individuals with disabilities, protected veterans, or any other protected status or characteristic. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment, and also states that retaliation against any employee who files a complaint regarding possible violations of this policy will not be tolerated. IES is also committed to taking affirmative steps to promote the employment of minorities, women, individuals with disabilities, and protected veterans. IES develops affirmative action programs to support its commitment to equal employment opportunity, consistent with company policy and the company's obligations as a contractor to the United States government. View Your Equal Employment Opportunity rights under the law. "EEO is the Law" poster | "EEO is the Law" poster supplement View IES' policy on Pay Transparency Pay Transparency NonDiscrimination Poster Disability Accommodation IES is an Equal Opportunity/Affirmative Action Employer. IES provides reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Era Veterans' Readjustment Assistance Act of 1974 and Title I of the Americans with Disabilities Act of 1990. Applicants who need accommodation in the job application process should contact the IES corporate office at ************** or any IES office to request assistance. Right to Work English SpanishTitle: Quality Manager Department: Quality Control Reports To: General Manager Classification: Exempt Duties & Responsibilities Improve product quality through effective problem solving Implement corrective actions that lead to continual improvement projects in each department Use corrective actions that are sustainable to resolve process defects and customer quality issues Collect, analyze, and report real time data related to defect improvement projects Monitor incoming material quality Provide support to the production team in the implementation of quality improvement projects Assist in maintaining the company ISO9001:2015 Quality Management System certification Train and oversee internal auditors Manage NCMRs (Nonconforming material report) and CARs (corrective action report) Responsible for tracking problems during and after shipment Apply Root Cause analysis skills in developing effective solutions Drive COQ (Cost of quality) metrics to determine impact on the company Required Skills & Abilities Proven experience as a quality inspector or relevant role Familiarity with quality testing machines and systems Thorough knowledge of quality control standards and testing methodologies Proficient with Microsoft Office Advanced skills in SharePoint Knowledge of pertinent industry standards and their application to production

Our award-winning client is seeking a Quality Engineer to join their team. In this role, you will play a key part in ensuring the quality of our molded foam products. You will coordinate internal audits, conduct plant assessments, track non-conformance reports, and manage quality records. You will also work closely with customers to address any issues and ensure their satisfaction. Responsibilities: Oversee internal audit scheduling, facilitation, and reporting. Conduct plant assessments, track non-conformance reports, and manage document control changes. Develop and maintain measurable charting and packing documentation. Generate cost of poor quality reports, weekly customer reports, and quality alerts. Schedule and summarize dock audits. Act as a quality representative for customers, including problem investigation and resolution. Coordinate supplier control and performance reporting. Maintain a safe work environment and adhere to all safety regulations. Demonstrate strong planning skills and the ability to manage multiple priorities. Possess excellent attendance and dependability. Required Qualifications: Associate's degree in a quality-related field (preferred). Experience in an automotive and quality environment. Excellent communication, interpersonal, and verbal skills. Proficiency in spreadsheets, Windows, and word processing software. Working knowledge of statistical process control (SPC), 8D problem-solving, 5 Whys, and Value Analysis/Value Engineering (VA/VE). Benefits: Competitive salary and benefits package. Opportunity to work in a fast-paced and growing environment. Build a rewarding career with a company committed to diversity and inclusion.

* Maintain Excellence: Support the surveillance and execution of the Global Management System (GMS) through internal audits, ensuring FST achieves excellence. * Ensure Compliance: Effectively close non-conformities to protect FST and its customers, preventing recurring issues. * Collaborate for Success: Work with various stakeholders to evaluate customer-specific requirements related to the Quality Management System and Warranty, ensuring legal compliance. * Innovate Quality Strategies: Define and identify new quality strategies and system tools to support FST's sustainable success, especially when market requirements change or new business is acquired. * Drive Continuous Improvement: Seek opportunities to enhance the Global Quality Management System, directly impacting FST's profitability. * Monitor and Improve: Evaluate and analyze Quality Key Performance Indicators, guiding improvement projects to promptly react and avoid waste. * Ensure Compliance: Execute internal system and process audits to confirm compliance with international standards and FST requirements, identifying best practices within the organization. Qualificationsarrow_right * Bachelor's Degree in Relevant Field; advanced degree preferred or compensating years of experience * Specified Years of Industry-relevant professional experience * Relevant certifications, system experience, and training * Professional-Level English language skills preferred * * Communication & Collaboration: Communicates clearly and concisely, while engaging proactively with colleagues at all levels of the organization. * Value for Customers: Anticipates, understands and meets internal/external customers' needs and expectations. Develops solutions based on a customer centric approach. * Innovation: Drives and supports innovative ideas, while taking informed risks to seek and develop new or improved solutions. * Drive & Execution: Proactively identifies what needs to be done and takes action. Explores new ways and pursues new opportunities. The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law.

PRIMARY FUNCTION The intern should be currently enrolled in a technical or post-secondary educational institution, pursuing a degree in a Cad/Cam, Engineering, or Engineering Technology program. The candidate must be proficient in creating two-dimensional drawings using AutoCAD Lite software. REPORTS TO: Engineering Department DIRECT SUPERVISION: None KEY AREAS OF RESPONSIBILITY: The Engineering Intern will undertake entry-level engineering tasks, which may include: Collecting Data Conducting Time Studies Designing Fixtures, Tooling, and Equipment Troubleshooting and Problem Solving Ensuring Quality Assurance Making Recommendations for Improvements REQUIRED KNOWLEDGE, SKILLS & ABILITIES: Basic Auto CAD or Inventor experience Hands on working desire Engineer mindset Good attitude, with attention to details Trainable for the professional world The successful candidate should be able to demonstrate a strong mechanical aptitude and ability. The Intern position will work a (40) hour work week that will be flexible to accommodate the students' class schedule. The Engineering Departments' work hours are from 7:00 A.M. to 5:00 P.M. Monday through Friday. The above description covers the principal functions of the job. It is not intended to be a complete listing of all miscellaneous, incidental, or similar tasks which may be assigned during normal or emergency operations.

Job Purpose Dana is a global leader in the supply of highly engineered driveline, sealing, and thermal-management technologies that improve the efficiency and performance of vehicles with both conventional and alternative-energy powertrains. Serving three primary markets - passenger vehicle, commercial truck, and off -highway equipment - Dana provides the world's original-equipment manufacturers and the aftermarket with local product and service support through a network of nearly 100 engineering, manufacturing, and distribution facilities. Dana Incorporated is seeking to fill 2026 Fall engineering co-op positions at their World Headquarters in Maumee, OH. This is a great opportunity to develop your technical skills by working alongside Dana's engineers in the completion of departmental oriented tasks/assignments. Job Duties and Responsibilities Department Overviews Benchmark Lab The Benchmark lab is responsible for understanding the products of our competitors. * Teardown competitor products for analysis. * Document components with photos and create photoprints. * Analyze findings and prepare teardown analysis reports. Gear Lab The Gear lab is responsible for successful production of prototype gears for Dana's axle assemblies. * Operate gear production equipment and perform tooling change overs. * Collect data and analyze gear dimensions to make necessary machine adjustments * Opportunity to learn about gear production. Materials Lab The Materials Lab analyzes the metallurgical/chemical composition of materials used in Dana's products to understand component failures and effects of production process changes. * Prepare samples for testing (section, mount, polish) and etching solutions. * Plan and perform testing and material analysis on test samples * Evaluate and interpret test results. Prepare test reports Test Lab The Test lab performs a variety of tests on current production parts and new product designs in order to understand potential failure modes. * Assist engineers with testing and development of Dana products and processes. * Assemble, test, and analyze specified products to meet various customer performance requirements. * Perform process development/documentation of safe manufacturing work instructions. Samples Department The Samples Department builds prototype axles and driveshafts that are used for lab and vehicle testing. * Assist in the building of prototype axle and driveshaft assemblies. * Review and create safety documentation. * Assist in implementation of 5S methodology. Applications Engineering Application engineers are responsible for interfacing with Dana's customer. They are the liaison between engineers at the vehicle manufacturer and Dana's internal engineering departments. * Analyze vehicle requirements to best determine the correct product for a vehicle application. * Work with the Product Engineering department to develop new part designs as necessary to fit vehicle needs. * Interface with the CAD department in order to create assembly prints. * Assist in managing the building prototype parts that will be used for lab and vehicle testing. * Oversee lab testing for product assemblies. * Remain in constant contact with Dana's customers to ensure superior customer service. Product Engineering Product engineers are responsible for new product design of component parts as well as determining how manufacturing process changes affect the integrity of production parts. * Work with the Application Engineering department to develop new part designs as necessary to fit vehicle needs. * Interface with manufacturing facilities to navigate production process challenges. * Communicate with the CAD department in order to create component part prints. * Oversee lab testing for component parts. * Work with Dana's purchasing team to determine suppliers who can best meet product needs. Benefits Paid co-op Opportunity for overtime depending on department Access to on-demand training & onsite technical education training sessions Potential visits to assembly & machining plants to learn about manufacturing processes & procedures Gain valuable work experience & work on diverse teams Opportunity for long term growth Join our team of 40,000 problem solvers who are fostering a culture of innovation by leveraging the diverse perspectives of our global team. We believe in facing challenges head-on by finding opportunity and uncovering possibility, where roadblocks and barriers become targets instead of obstacles. We are One Dana with limitless opportunity. Our Values * Value Others * Inspire Innovation * Grow Responsibly * Win Together

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose The Supply Chain Management Operations Department is responsible for the oversight, standardization and technical leadership of the internal material handling operations at the Honda automobile powertrain and final assembly sites across North America. The Process Engineer position is responsible for engineering and executing the internal logistics flow of parts through a specific Honda plant to the production line. This position will be responsible for supporting the development and design of internal material delivery processes, working and communicating with stakeholders, and developing solutions through process analysis, time studies, work balancing, etc. Key Accountabilities Support development, documentation and implementation of processes utilizing engineering tools (Maynard Operation Sequence Technique (MOST), AutoCAD, Visio, QMF, Excel, etc.) required to achieve project and business plan targets. Areas of responsibility include manpower planning, process and vanning layout design, expectation sheet development and New Model packaging evaluations. Identify and support implementation of process improvements in support of business plan objectives and general cost reduction. Execute tasks as prescribed by and maintain Specified Action Plans (SAP). Create SAP's for projects with limited complexity (less than $100,000). Maintain assigned process design through daily maintenance, process audits, and continuous improvement. Ensure all process related documentation is completed in the standard format, stored in the proper location, and communicated to all of the appropriate parties. Assist investigation of production related issues through situation analysis, using established problem-solving techniques and support the implementation of countermeasures. Qualifications/Experience/Skills Minimum Educational Qualifications: Engineering related degree or other relevant work experience Minimum Experience: 0-2 years of experience in engineering role Other Job-Specific Skills: Problem solving and decision-making skills. Proficient verbal and written communication skills. Ability to prioritize tasks and projects. Solid organizational skills. Proficiency with Microsoft Office (Excel, PowerPoint, Outlook). Understanding of warehouse management functions and support of manufacturing operation. Working Conditions Open office environment. Substantial overtime hours required during project / new model implementations. Alternate shift times may be required during project / new model implementations. What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development programs Additional Offerings: Tuition Assistance & Student Loan Repayment Lifestyle Account Childcare Reimbursement Account Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

is Fall 2026* The mission of our NEXT Cooperative Education Program is to turn top students into world-class engineers. Our engineers are some of the most talented and engaged engineers in the industry. As a leader in providing industrial automation and integration services, we offer stimulating, challenging projects across across a wide variety of industries including Consumer Packaged Goods, Food and Beverage, Chemical, Automotive, Metals, Pulp & Paper and Power & Utilities. We work in small teams, build strong relationships with our colleagues and customers, and provide many opportunities for career development. For all these reasons and more, our Engineers have a strong sense of accomplishment and choose to call EOSYS home. Program Benefits for our NEXT Engineers: * Formal technical training applicable to the job, * The opportunity to work on real, for-profit projects alongside experienced engineers, * The ability to participate a structured mentor program, * Connection with other Co-op Engineers across the company, * Free fully furnished housing during work sessions, * Competitive pay that increases as you progress in the program, and * Credit for time worked upon conversion to full-time permanent upon graduation! As a NEXT Engineer you will: * Participate in the design, construction, testing, implementation, and documentation portions of basic industrial control and/or information systems that meet requirements and team standards. * Assist in manufacturing operations using basic hand tools and power tools to perform assembly operations. * Assist in field operations including requirement definition, field survey, installation, checkout, commissioning and standby support. * Spend time learning technical skills; including computer aided drafting, hardware and software design techniques, software development and testing techniques, and system installation and checkout processes. Requirements * Enrollment in a 4 year degree program in Electrical Engineering, Computer Engineering, Chemical Engineering or another appropriate Engineering discipline. * Minimum 3.0 overall GPA (Be sure to upload transcript to application). * Must be authorized to work in the United States. EOSYS is not currently accepting work/student visas. * Successful completion of entry-level/ introductory engineering coursework. * Full-time academic enrollment during co-op work seasons. * Earn a satisfactory evaluation during each co-op session for approval to return the next session. * Successful completion of professional reference check, criminal background check and Drug Screen. All applicants must be authorized to work in the United States. EOSYS is not currently accepting work visas. EOSYS is an Equal Opportunity employer and provides equal employment opportunities to all qualified applicants without regard to race, color, religion, age, national origin, disability status, genetics, protected veteran status, sex, sexual orientation, sexuality, transgender status, gender identity or expression, or any other characteristic protected by federal, state or local laws. If you are a qualified individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting our HR department at ************.

Full-time Description is Fall 2026*** The mission of our NEXT Cooperative Education Program is to turn top students into world-class engineers. Our engineers are some of the most talented and engaged engineers in the industry. As a leader in providing industrial automation and integration services, we offer stimulating, challenging projects across across a wide variety of industries including Consumer Packaged Goods, Food and Beverage, Chemical, Automotive, Metals, Pulp & Paper and Power & Utilities. We work in small teams, build strong relationships with our colleagues and customers, and provide many opportunities for career development. For all these reasons and more, our Engineers have a strong sense of accomplishment and choose to call EOSYS home. Program Benefits for our NEXT Engineers: Formal technical training applicable to the job, The opportunity to work on real, for-profit projects alongside experienced engineers, The ability to participate a structured mentor program, Connection with other Co-op Engineers across the company, Free fully furnished housing during work sessions, Competitive pay that increases as you progress in the program, and Credit for time worked upon conversion to full-time permanent upon graduation! As a NEXT Engineer you will: Participate in the design, construction, testing, implementation, and documentation portions of basic industrial control and/or information systems that meet requirements and team standards. Assist in manufacturing operations using basic hand tools and power tools to perform assembly operations. Assist in field operations including requirement definition, field survey, installation, checkout, commissioning and standby support. Spend time learning technical skills; including computer aided drafting, hardware and software design techniques, software development and testing techniques, and system installation and checkout processes. Requirements Enrollment in a 4 year degree program in Electrical Engineering, Computer Engineering, Chemical Engineering or another appropriate Engineering discipline. Minimum 3.0 overall GPA (Be sure to upload transcript to application). Must be authorized to work in the United States. EOSYS is not currently accepting work/student visas. Successful completion of entry-level/ introductory engineering coursework. Full-time academic enrollment during co-op work seasons. Earn a satisfactory evaluation during each co-op session for approval to return the next session. Successful completion of professional reference check, criminal background check and Drug Screen. All applicants must be authorized to work in the United States. EOSYS is not currently accepting work visas. EOSYS is an Equal Opportunity employer and provides equal employment opportunities to all qualified applicants without regard to race, color, religion, age, national origin, disability status, genetics, protected veteran status, sex, sexual orientation, sexuality, transgender status, gender identity or expression, or any other characteristic protected by federal, state or local laws. If you are a qualified individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting our HR department at ************.

The primary role of this position is to support the Reliability Department in driving downtime reduction, root-cause solutions, and continuous improvement of reliability systems. This role focuses on equipment reliability across maintenance activities and new construction, as appropriate. The individual in this position will ensure the efficient utilization of departmental resources while enforcing and complying with Health, Safety, and Environmental (SHE) standards established by regulatory agencies and Emery Oleochemicals. Additionally, this role will drive optimal plant reliability through the implementation of cost-effective and sustainable solutions. Key Responsibilities Lead and maintain Mechanical Integrity programs for the Emery site. Drive continuous improvement in plant reliability. Implement preventive maintenance strategies within the SAP system and ensure completion. Establish and reinforce accountability in the execution of site and departmental policies and procedures. Develop and implement a formal program for root cause identification, failure analysis, and corrective actions related to maintenance failures. Provide leadership to ensure work is performed in an orderly, proactive manner based on principles of reliable design and preventive/predictive maintenance practices. Develop, implement, and continuously improve maintenance management systems, including mechanical integrity programs, work order systems, maintenance standards, and procedures. Develop, report, monitor, and take responsibility-alongside the Maintenance Manager-for improving key maintenance performance indicators, including: Maintenance expenses Availability component of OEE Number of call-ins Effective planning rate Work ratios compared to total work Education & Qualifications Bachelor of Science in Mechanical Engineering preferred. Bachelor of Science in another engineering discipline or an equivalent technical degree is acceptable with commensurate experience. Education or training in Reliability Engineering is preferred. Knowledge of 5S and Six Sigma methodologies is a plus.

Located Cincinnati, Columbus, Louisville, Akron, Indianapolis and Tampa, The Kleingers Group is a premier civil engineering, survey, and landscape architecture firm with focus in the healthcare, government, transportation, industrial, education, retail, athletic field design, and mixed-use markets. Over the past 30 years, our team of experts has provided our customers with practical and time-tested design solutions for various public and private clients. When you join us, you'll be well-supported by everyone - from colleagues and management alike. We have a strong culture of coaching and encourage cross-departmental cooperation to help you succeed at every step of your journey. You will be empowered to put your ideas into action and advance your knowledge and career. If you're ready to take on new challenges and reach for more, we'll give you every opportunity to do so, because at Kleingers you'll do more than join something - you'll add something! What a Kleingers Group Civil Engineer Co-op is all about: • Collaborating with a team of experienced engineers • Drafting and designing construction drawings for projects in the industrial, corporate, healthcare, retail, transportation, and mixed-use markets • Becoming proficient in the use of design and CAD applications • Learning how to organize your work to maximize your contribution, growth, and development • Working positively within a team environment • Developing skills and knowledge to increase and advance what you know to help meet your full potential • Learning how we interact with our clients to provide value • Having fun! We work hard to excel in our projects, but we like to engage and have fun too! What we are looking for: • Currently enrolled in a Civil Engineering degree program • Desire to work in a collaborative environment with coworkers • Thirst for knowledge and team-oriented • Organized with an attention to detail • Enjoys solving problems and asking questions • Ability to communicate and present ideas • Eagerness to learn and develop AutoCAD skills and create model-based designs in Civil 3D • Proficient computer skills in Microsoft Office including Outlook, Word, Excel. Willingness to learn minimal use of project management software

Lehman Daman Construction Services, Inc. began in 1946 and now employs over 50 people and is part of the Rudolph Libbe Group. Lehman Daman is comprised of two main divisions, large projects, and service. The large projects group handles what many would typically think of as commercial construction projects. The service division will fix problems as small as a broken door hinge all the way up to small, multi-trade and permit-required projects. For additional information, visit ******************** JOB DESCRIPTION A successful Co-Op will learn how to estimate projects and scopes of work, work directly with vendors to purchase materials and equipment and support Account Managers, Project Engineers, and Superintendents with job site and customer needs. Experienced Co-Op's will have the opportunity to assist on jobs from inception, through construction and to the final job closeout. As a Co-Op, you will be a part of the team from day one and given the training that is essential to any project's success. Lehman Daman will strive to support your continued education and development within the construction industry and build your potential for long-term employment. JOB RESPONSIBILITIES: Work hand in hand with their Account Managers/Engineers. Coordinate with vendors and subcontractors from bid process to job completion. Attend pre bid meetings and job site walkthroughs. Travel between job sites, vendor locations and home office as needed. Track and review shop drawings and other job correspondence. Project planning and implementation of activities and milestones. Document management (safety, submittals, logs, RFI's, transmittals, minutes). SKILLS: Lehman Daman is looking for a self-motivated individual that will use his/her time wisely and work well with others. They will be a team player but also be able to work independently. Strong computer and smart phone skills are a must. Maintaining a strong attention to detail and the ability to effectively communicate across a diverse group of people (Managers, Field Staff, Subcontractors and Customers) A positive attitude and the willingness to learn are essential. EDUCATION/EXPERIENCE: Students must be enrolled in a co-op program at an accredited school majoring in an engineering program (Construction Management, Mechanical/Civil or Industrial Engineering) Lehman Daman Construction Services, Inc. is an EEO Employer

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. Job Posting External The Operational Excellence Co-Op position is dedicated to exposing the applicant to multiple opportunities related to Crown's Lean Management System. These opportunities can either be project-based or event/experience-based depending on the background of the applicant and current department work focus. Job Responsibilities: * Listed below are examples of work content for the position: * Support value stream mapping projects and events - opportunities to learn and use software such as Video TimerPro, eVSM, Visio etc. * Support continuous improvement, 5S, process mapping, etc. events within multiple plants/departments. * Support Operational Excellence web-based and instructor-led training module development - opportunities to learn and use PowerPoint, SharePoint, etc. * Create pages for lean resources within Operational Excellence's SharePoint page - tracking systems, dashboards, repositories - opportunities to learn and use Power Automate, Power BI, Excel, etc. * Assist with conducting and/or tracking historical data for continuous improvement events or assessments. Job Qualifications: * Candidate must have a passion for problem solving and continuous improvement. * Proven ability to collaborate with colleagues and work effectively in a team. * Ability to convey information clearly and effectively. * Must have own reliable means of transportation and willingness to travel. * Preferred candidate will be pursuing a degree in Operations Management or Engineering - Electrical, Mechanical, Industrial, etc. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. EOE Veterans/Disabilities Nearest Major Market: Lima Nearest Secondary Market: Findlay Job Segment: Summer Internship, Sharepoint, Developer, Forklift, Warehouse, Entry Level, Technology, Manufacturing

We are seeking ambitious civil engineering majors, construction management majors, or similar, who are looking for experience during Spring, Summer, or Fall seasons! This opportunity will provide valuable experience and career potential. It is ideal that the right candidate is available for the full duration of the co-op season (typically 12 weeks). Main Job Tasks & Responsibilities: The Engineer Co-op (intern) provides various administrative support functions for assigned construction projects Understands daily field reports, cost codes, and tracking processes Supports daily functions of assigned Project Manager Meets internal and external customer deadlines Reports employee hours to payroll on a daily basis Enters employee hours within spreadsheets and/or software Tracks and reports equipment and craft hours to appropriate personnel Updates equipment lists and other spreadsheets as needed Files appropriate materials in Job Files daily Develops and maintains positive relationships Maintains professional behavior and appearance Other tasks as assigned Skills & Abilities: Strong written and verbal communication skills Strong organizational and prioritization skills Detail-oriented and flexible Proficient with Microsoft Excel and other site-specific software applications Ability to maintain focus and concentration in a busy and noisy environment Demonstrates respect for coworkers and customers Responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company Education & Experience College student currently majoring in Engineering or Construction Management. Transportation Must have reliable transportation and the ability to travel daily between job sites and the office as needed. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to sit, use hands to handle or feel, reach with hands and arms, verbally communicate (talk and hear). The employee is occasionally required to stand, walk, and kneel. The employee may need to occasionally lift and move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Equal Opportunity The Beaver Companies provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Want to help shape tomorrow? At Bendix we've been doing it for 90 years…setting the standard with advanced dynamic solutions that drive improved commercial vehicle performance and safety. We're part of the Knorr-Bremse Group, the global leader in braking technologies. As part of our team, you'll collaborate with a world of talented and dedicated colleagues whose sense of purpose complements your own. You'll find rewarding opportunities, diverse experiences, partnerships, and an unwavering commitment to ethics and integrity. Innovation is part of our DNA. Achievement drives our culture. Learn more today! ********************** JOB DESCRIPTION: QUALITY ENGINEERING CO-OP This co-op position is for a student majoring in Operations, Mechanical Engineering, or Industrial and Systems Engineering with a GPA of 3.0 or higher. A co-op in this position will work primarily in the Quality Department. Job Responsibilities •Participate in the development and implementation of projects aimed at improving customer satisfaction, quality systems, and operational efficiency • Monitor, analyze, and report customer and supplier quality metrics •Participate on product launch teams to complete requirements for quality engineering, including product scorecards, control plans, PFMEAs, and process flows • Manage assigned customer requirements •Contribute and participate in ISO9000/IATF16949 compliance and auditing •Complete Gage R&R and Capabilities studies using statistical tools • Develop quality corrective actions as assigned •Conduct competitive baseline analysis for warranty performance •Conduct warranty trend analysis (specific product failure analysis of warranty returns) • Manage the warranty critical failure mode process • Investigate and contribute to the resolution of customer or supplier issues (potential for travel as required) •Support merger and acquisition processes • Assist with process improvement projects, including use of six sigma tools and lean and project management skills as required •Support supplier improvement projects, including VDA audits and supplier evaluations •Serve as a liaison for Plant Quality, Supplier Quality, Operations personnel, Engineering, and other functional disciplines ELIGIBILITY REQUIREMENTS •Currently attending an accredited college or university •3.0 cumulative GPA or higher • Resourceful - not intimidated by substantial assignments •Self motivated and able to learn new assignments quickly • Ability to multi-task and work in a fast-paced, team-focused environment •Enthusiastic work approach • Knowledge of statistical tools preferred •Proficient in Microsoft Office Tools: Word, Excel, PowerPoint, and Access/Query GENERAL INFORMATION Hours and Location: 40-hour work week on-site in Avon, Ohio (20 miles west of Cleveland) or Huntington, Indiana What does Bendix have to offer you? - Work/life balance that includes Paid Vacation & Holiday Paid Time Off - 401k Plan with Company matching - Retirement Savings Plan - Educational Assistance Program (Tuition Reimbursement) - Wellness Program and incentives - Telework policy - On-Site Fitness Center - On-Site Cafeteria with Healthy menu options - Health and Welfare Insurance Benefits that start on your 1st day of employment: Company-Paid Benefits: - Basic Life Insurance - Basic Accidental Death and Dismemberment (AD&D) Insurance - Short Term Disability - Business Travel Accident Insurance - Employee Assistance Program (EAP) Voluntary Employee-Paid Benefits: - Medical and Prescription insurance - Dental insurance - Vision insurance - Supplemental Life Insurance Plans - Supplemental AD&D insurance for Employee and Family - Long Term Disability - Accident Plan - Critical Illness Plan - Hospital Indemnity Plan Bendix Commercial Vehicle Systems LLC is an Equal Employment Opportunity (EEO) employer. It is the policy of the Company to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information.

Build an Aviation Career You're Proud Of StandardAero is one of the largest independent maintenance, repair, and overhaul providers in the aerospace industry. At our plants, our units engage in a variety of work scopes involving trouble-shooting, problem solving, and working together to embody our #1 priority, which is ensuring the safety of our people and our product. What's it like at StandardAero Collaboration, teamwork, and having each other's backs are the norm here. Our growth in this expanding industry means getting career stability and opportunities to grow. With great resources, an inclusive atmosphere, and a culture based on shared values, we'll support you in building a solid career with a team you can count on. StandardAero is seeking motivated, eager, and innovative students looking to join one of our Engineering Team. As an intern at StandardAero, you will gain hands-on industry experience, learn from experts, and collaborate with our teams that raise the standard of excellence. Join our team today and build an aviation career you're proud of! Job Duties: Students may be involved in one or many of the following: Research the viability of a new program or initiative; compile and present statistics. Clean up, edit and update a database. Conduct a failure analysis and investigation. Evaluate and improve efficiency, streamline programs, or cut costs. Perform a study or survey; analyze and present results. Compile employee manuals or develop process directions for tasks. Conduct a cost benefit analysis to upgrade on a specific material/machine. Design tooling or ground support equipment. Work on a continuous improvement project resulting in a measurable improvement. Carries out other duties as assigned Basic Qualifications (Required Skill/Experience): Completion of two years of education in engineering related curriculum Project Management Experience with CAD and simulation software Familiarity with Lean Manufacturing and 5S Principles Lean Green Belt Certification preferred Project Experience in manufacturing setting preferred The ability to read and interpret manuals, technical drawings, and blueprints. The ability to follow both written and verbal instructions. The ability to lift up to 50lbs without assistance. The ability to sit for extended periods of time. Must be a U.S. Citizen What makes a good fit for StandardAero We love people who take pride in their work and being collaborative with their team. We work together and support each other. We're very team oriented too and that is greatly valued. We also believe in getting the job done, whatever it takes and that's a work-ethic that is often hard to describe. We love that too -it's what makes us great partners and teammates to each other. We are respectful of each other and who we are, and welcome people from all walks of life and give everyone open access to learn and build skills. If this sounds like a great fit for you, we hope you apply and join us. Inclusivity Is Our Standard StandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to be who you are and experience our welcoming culture. Raising the Standard of Excellence since 1911 With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.

RESPONSIBILITIES: Knock out ceramic from foundry molds with hammer. Verification of parts to paper work. Alloy type test using X-ray spectrometer. Rough and precision cut of castings using abrasive cut-off saw. Trim parts using abrasive cut-off saw. Ensure proper placement of alloy for revert. Ensure proper paper work is with foundry cast molds prior to Knock-Out. Perform other duties as assigned. Record all work performed in Lot Control. Keep the work area in a clean, orderly and safe working condition. Follow all safety rules. Comply with all applicable Standard Operating Procedures. Perform all other duties assigned by supervision. CERTIFICATION OF CUT-OFF: 90 days of continuous training required. Know all procedures. All training documents must be completed and approved before receiving wage increase. QUALIFICATIONS: Pay close attention to detail. Must have a good attendance record. No written or higher warnings for quality or attendance. Must show ability to follow detailed procedures reliably. Be able to meet daily production goals. Ability to work in a team environment. Ability to be self-directed and motivated. Capable of handling multiple tasks. Demonstrate proficiency of applicable procedure instructions.