Dakota Kitchen & Bath jobs - 753 jobs

Job DescriptionSalary: $20+ DOE Are you looking for a change? Would you enjoy using computer software to assist to draw up designs for our sales team to share with our customers? We WANT to talk to you!! A successful candidate MUST be able to use computer aided software (preferably cabinet vision) to draw up plans per dealer, contractor, or direct customer's wishes. This position will be responsible for ensuring cabinet specifications work with the potential layouts. This individual needs to have great attention to detail and able to work within time restraints. Candidate must be able to communicate with a variety of people and understand the directions given via phone, email, or in person. Individual will be responsible to revise drawings and work with sales personnel until the approval process is completed. This person also needs excellent customer services skills to be able to build and maintain relationships within our internal and external sales network. A successful candidate must have basic cabinet knowledge with the ability to learn our product specifications. Communication and customer service must be spot on to ensure we offer the best customer service to our customers. We offer a full benefit package including Health, Dental, Vision, and Life Insurance as well as 401K and PTO.

This entry-level position is responsible for learning and training on a variety of tasks to process, dry and package whey products that meet customer expectations and support the achievement of the company's vision, mission and values. Essential Functions Provide assistance to operators and learn the basics of each position. Perform preventative operator maintenance (POM) duties and complete additional cleaning tasks as determined by the supervisor. Provide support to Whey Operator during CIP process. Monitor, test and correct CIP concentrations. Assist and support cleaning-related POMs. Assist in CIP on MP RO/POL, Water HTST and all associated lines, tanks and equipment according to SOPs. Provide support to Lactose Operator and Evap Operator during CIP process. Monitor and sample RO/POL/HTST process during shutdown, CIP, and startup at specified control points and correct any deviations from defined analytical set points. Transport finished WPC80 and Lactose to storage. Maintain good communications with lead and/or supervisors to ensure a safe, continuous product flow and proper maintenance of equipment. Complete and maintain appropriate paperwork and documentation to ensure accurate record keeping. Operate and monitor assigned food safety preventative controls including verification activities, equipment operation, records requirements and corrective action database. Safely handle, prepare and use chemicals while wearing proper PPE. Attend and/or complete required safety and quality training sessions by the assigned deadlines. Comply with all company safety rules to achieve no injuries and no lost time accidents. Understand and adhere to all food safety, GMPs, and OSHA policies and procedures. Adhere to all standard GMPs and performs all work in a manner that ensures the highest standard of food safety and quality. Competencies Teamwork Oriented Problem Solving/Analysis Communication Proficiency Initiative Detail Oriented Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This job operates in a food production environment. While performing the duties of this job, the employee is frequently exposed to chemicals, moving mechanical parts and vibration. The noise level in the work environment can be loud. Physical Demands Please refer to the separate functional for this position. Position Type/Expected Hours of Work This is a full-time position, and days of work are on an alternating repeating schedule. Hours of work for training are from 5:00 a.m. - 5:00 p.m., working an alternating schedule. Once trained, anticipated transfer to night shift to fill permanent position, working from 5:00 p.m. - 5:00 a.m. working an alternating schedule. Travel No travel is expected for this position. Required Education and Experience High school diploma or GED is required for this position. Maintain current forklift certification. Preferred Education and Experience Desire two or more years in a manufacturing facility. More specifically, experience with food grade products is preferred. Bilingual in English/Spanish. Additional Eligibility Qualifications Minimum age requirement is 18. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. 5-2-2-5 5:00AM to 5:00 PM or 5:00 PM to 5:00 AM

About the Role We're looking for skilled Maintenance Technicians & Mechanics to keep our production and facility equipment running at peak performance. In this role, you'll troubleshoot, repair, and maintain mechanical, electrical, pneumatic, and hydraulic systems to ensure smooth operations and zero downtime. What You'll Do Install, maintain, and repair food processing and production equipment. Diagnose and fix mechanical, electrical, pneumatic, and hydraulic issues. Read and interpret manuals and work orders to complete service tasks. Perform routine plant inspections and address potential issues proactively. Respond quickly to maintenance calls to keep production moving. Maintain utility systems to prevent downtime. Keep accurate records for safety, quality, and compliance. Follow all safety rules, PPE requirements, and food safety standards. Participate in required safety and quality training. Identify opportunities for continuous improvement. What We're Looking For Experience: Hands-on maintenance experience in a manufacturing or industrial setting. Skills: Strong mechanical and electrical troubleshooting skills; ability to work with pneumatic and hydraulic systems. Tech Savvy: Basic computer skills for work orders and documentation. Problem Solver: Ability to think on your feet and resolve issues quickly. Team Player: Good communication and time management skills. Preferred Qualifications Knowledge of ammonia refrigeration systems. Welding experience. Bilingual (English/Spanish). Associate degree in a technical field or equivalent experience. Additional Details Work Environment: Shop and plant setting with exposure to moving parts, vibration, temperature changes, and loud noise. Travel: Less than 5%. Requirements: High school diploma/GED, valid driver's license, minimum age 18. Ready to join a team that values safety, quality, and continuous improvement? Apply today and help us keep production running smoothly!

Invest in Your Success with Mac Tools Are you ready to be your own boss and build a thriving business? Mac Tools offers a unique opportunity to own and operate a successful franchise. With a strong credit profile and the right financial foundation, you can unlock the potential to achieve financial independence and a fulfilling lifestyle. As a Mac Tools franchisee, you will enjoy the freedom and flexibility of running your own business without the overwhelming burdens of startup. Mac Tools offers a family-oriented culture; supported by Stanley Black and Decker - the largest tool company in the world - giving you the best of both worlds. Key Benefits of Mac Tools Franchise Ownership Exclusive Territory: Build a loyal customer base in your protected territory. Mac Tools currently has over 1,250 existing franchisees with opportunities available in all fifty states, including Puerto Rico and across Canada. Proven Business Model: Benefit from an award-winning system that has earned accolades including Fastest Growing Franchise, Top 100 Franchise, Franchise 500, and more. World-Class Training: Gain the skills and knowledge you need to succeed via classroom and field-based sales training at our headquarters. Ongoing Support: Receive continuous guidance and assistance, including national marketing support with motorsports branding, sales flyers, videos, etc. Strong Brand Recognition: Leverage the brand power of Mac Tools and Stanley Black and Decker - the largest and fastest growing tool company in the world. Financial Flexibility: Explore various financing options to fit your needs. Financial Requirements To qualify for a Mac Tools franchise, a strong credit profile and an initial down payment are essential. Your financial strength is a key factor in our franchise approval process, and we have lower start-up costs than many other franchise opportunities with a variety of financing options. Our Veterans Program offers vets or their spouse credits of up to $25,000 towards inventory purchases. Ready to Take the Next Step? Are you a qualified entrepreneur ready to invest in and operate a Mac Tools franchise? Complete our quick mobile application to start your journey towards financial independence. Our team can get you scheduled for one of our free Discovery Days, providing the opportunity to meet current Franchisees and experience the business first-hand. Mac Tools , a division of Stanley Black & Decker Inc. 5195 Blazer Parkway Dublin, Ohio 43017

Join our Team: Sr. Manufacturing Engineering Manager, On-Site Watertown, SD Full Relocation Offered for the right candidate Join our team at Terex Utilities and embark on an exciting opportunity as we seek a skilled and dedicated Senior Manufacturing Engineering Manager to contribute to the Terex team in Watertown, SD. This role is pivotal in shaping the future of our manufacturing operations - with a strategic focus on investing in and transforming our Training, Fabrication, Assembly and special processes with the goal to become a Center of Excellence for safety, automation, and operational performance. At Terex we believe in fostering a vibrant and inclusive work culture where every person is empowered to thrive. We're dedicated to driving quality, innovation, embracing diversity, and creating an environment where everyone feels valued and respected. We're committed to excellence in everything we do, and we're seeking talented individuals who share our passion and values to join our team. The Senior Manufacturing Engineering Manager will lead a team of Manufacturing engineers, Trainers, Automations and robotics teams across multiple Terex Utilities sites. This role requires a hands-on, emotionally intelligent leader with deep technical expertise in heavy equipment manufacturing and a proven ability to coach and develop high-performing teams. You will be responsible for standardizing manufacturing processes, implementing robotics and digital tools, and partnering cross-functionally to ensure seamless product launches and sustained operational excellence. A key focus will be on investing in tooling, fixtures, rotators, and material handling systems to improve safety, quality, and delivery - while unlocking efficiency through overlapping cycle times and operator engagement strategies. What You'll Do Lead, mentor, and develop a distributed team of Manufacturing Engineers. Drive strategic investment and transformation at the Huron site, including tooling, fixtures, rotators, and automation. Foster psychological safety, accountability, and a culture of continuous improvement. Develop and optimize manufacturing processes across welding, machining, coating, assembly, hydraulics, and electrical integration. Champion automation and robotics initiatives to improve throughput and reduce manual operations. Implement digital manufacturing tools (DMS, dashboards, electronic work instructions). Drive Design for Manufacturability (DFMA) and partner with design teams for smooth New Product Processes. Manage capital projects including justification, budgeting, installation, and validation. Lead Lean, Six Sigma, and Kaizen initiatives to reduce waste and improve safety and productivity. Oversee document control and process standards through the division's QMS. Guide team thru the capturing of time studies, establish labor standards, and optimize layouts for flow and capacity. Ensure compliance with safety, environmental, and quality standards. Strategically assess operator engagement during machine/robot run time to maximize value-add activities. What You'll Bring Bachelor's degree in Manufacturing, Mechanical, Industrial, or related Engineering field. 7-10 years of progressive manufacturing engineering experience in heavy equipment or industrial manufacturing. 5+ years of leadership experience managing technical teams. Strong background in welding, assembly fixtures, metal fabrication, Tooling, and coating systems. Proven experience in automation, robotics integration, or digital manufacturing (preferred). Proficiency with CAD/CAM and 3D modeling tools (SolidWorks, AutoCAD, Creo OnShape). Familiarity with ERP/MRP and ECO/ECN processes (Oracle preferred). Demonstrated success in Lean Manufacturing, 5S, and Kaizen environments. Strong project management skills including budgeting, scheduling, and risk management. Advanced analytical and communication skills with ability to influence across all levels of the organization. Preferred Qualifications Toyota Production System knowledge and applicable experience. TWI Job Instruction (JI) or Toyota KATA coaching experience. Experience leading daily management systems. Bilingual in English and Spanish is a plus. Your Impact Strategic Priorities: Invest in and modernize with advanced tooling and automation. Drive automation and robotics adoption across manufacturing processes to improve work environment for team members and position for industry growth. Standardize engineering practices to enable predictable performance in SQDCM. Support facility modernization and digital transformation initiatives. Develop current and future engineering leaders. Partner cross-functionally to ensure manufacturability and operational scalability. Maximize operator value-add during automated cycles. Salary: The compensation range for this position is $125,000 - $150,000 annually/salary. Pay is based on several factors including but not limited to education, work experience, certifications, etc. This above description is non-exhaustive and there may be additional duties in accordance with the role. Why Join Us We are a global company, and our culture is defined by our Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Check out this video! The Terex purpose Safety is an absolute way of life. We expect all team members to prioritize safety and commit to Zero Harm. Our top priority is creating an inclusive environment where every team member feels safe, supported, and valued. We make a positive impact by providing innovative solutions, engaging our people, and operating in a sustainable way. We are committed to helping team members reach their full potential. Through innovation and collaboration, our vision remains forward-looking, and we aim to be a catalyst for change, inspiring others to build a better world for generations. For more information on why Terex is a great place to work click on the link! Careers | Terex Corporate If you are interested in an open position but feel you may not meet all the listed qualifications, we still encourage you to apply. About Terex: Terex Corporation is a global industrial equipment manufacturer of materials processing machinery, waste and recycling solutions, mobile elevating work platforms (MEWPs), and equipment for the electric utility industry. We design, build, and support products used in maintenance, manufacturing, energy, minerals and materials management, construction, waste and recycling, and the entertainment industry. We provide best-in-class lifecycle support to our customers through our global parts and services organization, and offer complementary digital solutions, designed to help our customers maximize their return on their investment. Certain Terex products and solutions enable customers to reduce their impact on the environment including electric and hybrid offerings that deliver quiet and emission-free performance, products that support renewable energy, and products that aid in the recovery of useful materials from various types of waste. Our products are manufactured in North America, Europe, and Asia Pacific and sold worldwide. Additional Information: We are passionate about producing equipment that helps improve the lives of people around the world and providing our team members with a rewarding career and the opportunity to make an impact. We are committed to recruiting, engaging, developing, and retaining team members at all levels of our global workforce. Our culture is defined by our Terex Way Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Our values are the driving force behind our commitment to maintain an inclusive, supportive, non-discriminatory, and safe workplace for all team members. To that end, we are committed to actively foster a culture where every team member feels valued, listened to, and appreciated. We are committed to being fair and impartial in our decisions. As an Equal Opportunity Employer, employment decisions are made without regard to race, color, religion, national origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. If you are a qualified individual with a disability, including disabled veterans, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting the recruiting department (person or department) at [email protected]. The Company offers competitive salaries, advancement opportunities, and a full range of benefits, including paid vacation, 401(k), medical, dental, and vision.

Help shape the structures that shape our communities! We're looking for a Design Engineer who's excited to turn bold ideas into buildable, real-world solutions. In this role, you'll design innovative precast components, collaborate with a tight-knit team of engineers and production experts, and see your work come to life on projects across the region. ***It is highly desired for this candidate to be based in Sioux Falls, SD. Relocation assistance available.*** Location: Molin Sioux Falls - 2810 N Bahnson Ave, Sioux Falls, SD 57104 Essential Functions: Prepare calculations and drawings to support structural design of product to include concrete reinforcement, product sizing, connection requirements and overall stability analysis to meet customer demands and building codes. (Hollowcore, plank, beams, columns, slabs, wall panels) Examine general plans, specifications and cost estimates to ensure drawings match customer expectations. Produce preliminary engineering calculations and design work for use by Sales and Estimating in the bidding process. Coordinate documentation and communication of construction details, loadings, etc. with General Contractors, Architects, Engineers, and Project Managers. Responsible for checking production piece drawings for proper reinforcing, lifting and stressing requirements. Respond to requests to review pre-pour and post-pour conditions, investigate damaged product or design issues to assure integrity of product and/or offer solutions for change or repair. Review cull reports and provide solutions within 24 hours. Respond to inquiries by Field employees or External Customers to resolve design issues and/or address damaged product(s) on jobsites. Provide solutions that are timely and cost effective without jeopardizing product reliability. Provide answers to questions from Outsourcers. Create spreadsheets and other tools to standardize processes and improve efficiencies. Stay current with building code changes. Assist with coaching and training of EIT and drafters as requested by Engineering Manager. Lead continuous improvement initiatives to eliminate inefficiencies and standardize processes. Attend design meetings to discuss opportunities and solutions using Molin products. Continuing education to maintain PE license(s) Education and Experience: PE License required BS degree in Civil Engineering 2-4 years experience in construction or the design/manufacture of precast Knowledge, Skills & Abilities: Team player. Knowledge of precast/prestressed concrete properties and processes for structural and architectural products. Able to read and adjust blueprints and other construction documents. Knowledge of structural engineering design practices and construction methods. Proficient in AutoCAD, Revit, Bluebeam, Risa, and Concise. Eli Plan software, in addition to a working knowledge of Microsoft Outlook, Word, Excel macros, and Project. HILTI-PROFIS Anchor. Strong organizational skills. Proficient at managing multiple projects and meeting deadlines; Project management. Excellent written and verbal communication skills; good listener. Desire and ability to train others desirable. Attention to detail and high degree of accuracy. Work with minimal supervision. Good documentation skills. High spatial intelligence and math aptitude. Excellent customer service skills. Working knowledge of building codes and design standards.

Nutting Material Handling Equipment is located at: 450 Pheasant Ridge Drive, Watertown, SD. JOB TITLE: WELDER REPORTS TO: Production Supervisor / Plant Manager DEPARTMENT: Welding Work Schedule: 4 ten hour days (Mon-Thurs.) $500.00 DOLLAR SIGN ON BONUS BASIC FUNCTION: Perform, under minimum supervision, the function of lay-out, fabricating and mig welding. GENERAL JOB RESPONSIBILITIES: Interpret simple to difficult drawings, sketches and/or work from samples and instruction. Set-up and perform mig welding on items for customer products. Responsible for producing acceptable work which meets or exceeds all Quality Control Standards. Safely operate various forms of material handling equipment such as hoists, cranes, tow motors, etc. Maintain cleanliness and organization of work area. Exhibit interpersonal skills sufficient to perform as an active team member. Perform other duties as assigned or required by company management. JOB QUALIFICATIONS: Preferred but not mandatory. Must be able to obtain welding certification within six months of hiring date. Ability to read and interpret blueprints. Requires attention and care to prevent injury to self and others when performing work. Ability to use various measuring tools. 1 - 3 years welding experience preferred. PHYSICAL REQUIREMENTS: Routine stooping and bending. Occasional heavy lifting - up to 50 lbs. Ability to stand 7+ hours per day. OTHER REQUIREMENTS: Must be able to read, write and understand the English language. Demonstrate a positive and business-like attitude. Required to wear all OSHA mandated safety equipment and to adhere to all company safety practices and policies. Conduct all interactions with customers (internal and external), vendors, field sales representatives, co-workers, and supervisors in a focused, positive, courteous and respectful manner. Regular attendance is an essential element of the job. Unplanned absences have the potential to impair the operation of the department and diminish effectiveness of the company. NOTE: This job description is not intended to be all-inclusive. It represents typical duties and criteria necessary to successfully fulfill the responsibilities of the position. Other duties may berequired at the discretion of supervision or management. Nutting/Acco, Inc. is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Do you enjoy driving, but don't want to be gone every night? Do you have customer service skills? Then WE want to talk to you! If you are a motivated individual with a valid CDL and a customer-focused approach, we encourage you to apply for this exciting opportunity. Join our team and be part of a dynamic workplace where your skills and dedication are valued! Responsibilities: Assist in organizing and loading/unloading trucks with products. Drive and deliver products to our customers' garages in a timely and professional manner. During downtime, support warehouse and production as needed. Perform other duties as assigned by management. Qualifications: Active CDL (Class B w/ no restrictions- Commercial Driver's License) required w/ Medcard. Ability to drive a manual transmission. Ability to lift up to 100 lbs comfortably. Excellent customer service skills with the ability to build rapport with customers. Enjoy a comprehensive full-time benefit package designed to support your well-being and future! As part of our commitment to our employees, we offer: Paid Time Off (PTO): Take time to recharge and enjoy life outside of work. Health Insurance: Access to medical coverage to support your health needs. Dental Insurance: Coverage for dental care to keep your smile healthy. Vision Insurance: Assistance with vision expenses to maintain good eyesight. AFLAC: Additional insurance options to provide extra protection and peace of mind. 401(k) Retirement Plan: Start saving for your future with our retirement savings plan. We are excited to offer more than just a job - join our team and enjoy additional perks that make our workplace special! As part of our commitment to creating a positive and enjoyable environment, we provide donuts every Monday to kick off the week, popcorn every Thursday for a mid-week treat, monthly appreciation lunches to celebrate our team's hard work, and a monthly attendance bonus drawing to reward dedication. At Dakota Kitchen & Bath, we believe in supporting our employees inside and outside of work. Apply today and be a part of a team that values your contribution and well-being!

About The Role The Quality Assurance Site Leader reports to the Quality Assurance Manager. The Quality Assurance Site Leader will work with all company functions at their site to ensure that our processes are capable to meet the standards set forth in the Trail King Quality Management System. Responsibilities Oversee and provide guidance for all QA employees and quality improvement initiatives. Will assist developing and maintaining the Trail King Quality Management System to meet requirements of the ISO9001:2015 standard. Continually improve the TK Quality Management System to ensure best in class product quality. Maintain quality records for the site. Assist with training and auditing quality processes. Evaluate suppliers and inspect outsourced components to ensure quality. Implement process enhancements that continually improve the output of operations. Perform regular product inspections. Other duties as assigned. Candidate Requirements Bachelor's degree in engineering or manufacturing related field with 1 year manufacturing experience, or at least 4 years of Manufacturing or Quality experience. Ability to motivate and teach others about the Quality Management System. Ability to easily interact with all levels of the organization. Ability to work under pressure from internal and external sources due to personnel issues, manufacturing requirements, time constraints, safety considerations, etc. Ability to identify and adopt new technologies in Quality management. Personal Trait Profile Team Player-ability to work across the organization. Strong analytical, creativity and problem-solving skills. Clear and concise oral and written communication skills. The ability to lead by example and effectively coach and mentor. Excellent organizational skills and attention to detail. Ability to manage multiple projects simultaneously. Physical Demands & Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is required to stand; walk; sit; climb; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment : While performing the duties of this job in the factory areas, the employee is exposed to changes in temperature and humidity, exposure to dust, fumes and is near moving machinery.

The Master Production Scheduler is responsible for developing, maintaining, and executing the master production schedule across all product lines using Infor CloudSuite Industrial (CSI) with Advanced Planning and Scheduling (APS). This role ensures alignment between sales demand, manufacturing capacity, and material availability to achieve on-time delivery, efficient resource utilization, and operational flow. The Master Scheduler serves as the central authority for schedule integrity, driving disciplined use of CSI workbenches, exception management, and coordination across production teams. Key Roles: Own and maintain the Master Production Schedule (MPS) within CSI, ensuring all production aligns with approved S&OP build plans and capacity constraints. Run APS workbenches daily, review, and act on exceptions to ensure timely visibility and action on scheduling conflicts. Oversee and approve schedules across all product lines (Municipal, Skid/Excavator, Cherokee, etc.), ensuring subordinate schedulers follow approved sequencing and capacity plans. Identify production and material risks early (capacity constraints, late suppliers, engineering changes, or part shortages) and develop practical solutions or escalation recommendations before schedules are impacted. Lead daily and weekly production and scheduling meetings, providing clear priorities, communicating constraints, and maintaining alignment. Partner with Operations, Supply Chain, and Engineering to resolve conflicts, improve flow, and eliminate schedule volatility. Maintain system discipline, no hard-dating of jobs or manual manipulation outside APS logic unless approved by the VP of Operations. Lead, manage and hold accountable direct reports. Continuously train, coach, and work to enhance performance of existing employees to include hiring as needed. Establish clear performance expectations, KPI's and hold team accountable for results. Responsibilities: Planning & Scheduling Develop and maintain the Master Production Schedule in CSI using APS-generated data and approved demand plans. Run APS daily; review, validate, and act on exceptions including late jobs, material shortages, and capacity overloads. Level-load production schedules to align with available labor and machine capacity while supporting on-time delivery. Coordinate schedule dependencies and communicate changes to all stakeholders in a structured, transparent manner. Collaborate with purchasing and inventory management to ensure material availability supports production requirements. Support new product introductions and engineering changes by validating schedule impact and ensuring smooth integration. Execution & Communication Lead or participate in daily production and scheduling meetings with department schedulers and production supervisors. Approve and publish weekly build schedules for all departments, ensuring downstream alignment. Ensure Cherokee scheduling and completion dates for Municipal and Skid/Excavator assemblies are properly aligned and approved before release. Provide accurate lead-time, completion, and constraint data to customer service and sales teams. Communicate schedule changes proactively and ensure all impacted departments are informed promptly. Monitor and report schedule adherence, schedule stability, and actual vs. planned completions. Continuous Improvement Identify and eliminate manual scheduling practices that bypass CSI logic or undermine APS planning. Lead improvement projects to enhance planning data accuracy-particularly BOM accuracy, routing times, work center capacity, and resource calendars. Provide training and mentorship to schedulers and planners to elevate system discipline and understanding of APS. Analyze schedule performance trends to improve forecast accuracy and lead-time reliability. Work with IT and Operations to optimize CSI reporting and dashboards related to scheduling and capacity planning. Systems and Reporting Utilize CSI APS Workbench, Resource Load Graphs, and Exception Reports to drive daily action and prioritization. Maintain CSI dashboards tracking schedule adherence, bottlenecks, and late order trends. Support S&OP reporting requirements by providing accurate build plan execution data and capacity metrics. Lead schedule resets when systemic drift is identified, coordinating across departments to realign demand and capacity. Strive for an injury free workplace through a “safety first” attitude. Wear required Personal Protective Equipment (PPE) at all times. All other duties are performed as necessary. Qualifications: Bachelor's Degree in Business, Operations Management, or related field preferred; equivalent experience considered. Minimum 3 years' experience in manufacturing scheduling or planning; prior experience with Infor CSI (SyteLine) strongly preferred. Strong understanding of APS logic, load balancing, and capacity planning principles. Proficiency in MS Excel and data analysis/reporting. Demonstrated ability to lead cross-functional communication and drive schedule accountability. Excellent problem-solving, organizational, and communication skills. Key Performance Metrics: Schedule Adherence (% of jobs completed as planned) On-Time Delivery Rate APS Exception Closure Rate Schedule Stability (measured change frequency and impact) Capacity Utilization Accuracy BOM/Routing Data Accuracy affecting schedule reliability Location and Hours: Location: 350 E 60 th St N Hours: 8:00am-5:00pm (in office) Days of Shift: Monday-Friday A full benefits package is available for all full-time employees. Exhibit Diamond Company Values: CUSTOMER FOCUSED Meeting and exceeding internal and external customer expectations is the responsibility of everyone. We are committed to being a World Class organization and the greatest partner to our customers. We will listen, support, engage with empathy, our work must drive the success of our internal and external customers and team members. ACCOUNTABILITY We will be responsible for the commitments we make, and the expectations placed on us. When we fail, we will own it, learn from it and make the appropriate changes. We will act with exceptional integrity in everything we do. We will be open to receiving and giving feedback. TEAM PLAYER Teamwork and clear communication are paramount to our success. We will seek and provide constructive feedback to one another, work as a collaborator, treat peers with respect and dignity, engage all team members as partners to solve problems and support one another with a positive attitude. SAFETY We believe safety must be at the forefront of all our decision-making. We will proactively invest in safe solutions and act consciously every day to keep ourselves, team members and customers safe. GRIT We have the passion, determination and work ethic that gives us the ability to push through, to get to the end goal and recognize the obstacles we have overcome along the way. When we tackle a difficult situation, we are determined to never give up and be the best in the industry. Diamond Mowers is an EEO/AA Employer M/F/Disability/Vet.

Production Operator The Production Operator is responsible for running and operating equipment used in the throughput and refinement of colostrum and colostrum-based products using company guidelines and standards along with customer specifications. The incumbent monitors and manipulates various production equipment while adhering to production schedules and ensures a steady flow of product is maintained at all times. Maintaining a clean and safe work environment is a primary responsibility for the Production Operator. Reports To: Production Supervisor or Production Manager FLSA Status: Non-Exempt Revised Date: April 2017 Prepared By: Human Resources Manager Essential Functions * Monitors and adjusts equipment and settings to ensure the production of colostrum is running efficiently and within specifications. * Takes steps to ensure product loss/waste is at a minimum. * Maintains a clean working environment at all times. * Heats and regulates temperature of product using HTST and ensures that product production is completed within time and quality standards. Once HTST processing is complete, clean equipment using SOP guidelines as assigned. * Completes curding colostrum in a cheese vat as assigned. This process includes monitoring temperatures and processing time within established standards/guidelines, and adding rennet to complete the curding process. * Runs and monitor filtration equipment to finish product based on customer specifications. * Completes/monitors pasteurization of product in processing tank within time and temperature specifications. * Lifts, moves, and pours 44-55 lb. bags of dry powders into liquid product during processing. * Transfers product into finishing vessel for drying and packaging. * Completes established clean-in-place (CIP) processes to ensure tanks and vessels are properly cleaned after processing. * Operates forklift to transport product within the plant. * Promotes and complies with all safety standards of Sterling Technology to maintain a safe and healthy work environment. * Performs other duties as assigned and when needed. Supervisory Responsibilities None Qualifications To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of these knowledge, skills, and/ abilities. Knowledge, Skills and Abilities * Knowledge of the production process is required * Safety and sanitization skills are required * The ability to maintain company confidentiality is required * The ability to remain on task, focused and vigilant at all times is required * General knowledge of machines, equipment, production lines, and processing is required * Previous production skills and experience preferred Electronic/Computer Skills Automated controls and electronic system monitoring is required. Specific computer program experience is not required. Physical Demands and Efforts The physical demands described here are representative of those that could be expected of an employee in the performance of the essential functions of this job. Incumbents will be expected to alternate between standing, and walking throughout the course of an 8-12 hour shift. Must be capable of communicating with others both verbally and in writing; will be expected to use hands or fingers to manipulate equipment. Frequently required to reach below and/or above waist level and below and/or above shoulders or head. Frequently required to lift & carry up to 55 lbs. Frequently climbs ladders to get to elevated platforms. Vision Requirements Vision requirements include close, distance, and midrange vision, color vision, peripheral vision, depth perception, and the ability to focus near and far frequently. Work Environment The work environment is moderately noisy and includes running machines, frequent interruptions and moderate traffic. Incumbents will have extended exposure to wet, dry, humid, hot, cold, and/or hazardous conditions, including occasional entry into confined spaces. Frequent manipulation of hazardous chemicals and knowledge of how to deal with these chemicals is required. At Glanbia, we celebrate diversity, because we know that our individual strengths make us stronger together. We welcome and encourage interest from a wide variety of candidates, and we will give your application consideration, without regard to race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, protected veteran status, or disability status. At Glanbia our culture will celebrate individuality, knowing that together we are more. Nearest Major Market: Sioux Falls

The Huron Police Department provides police and dispatch services to a community of over 13,000 people. We have several different specialties within our department that are available as you progress through your career. A few of those specialties include: SWAT, Field Training Officer, Detective, School Resource Officer, and K-9 Handler. We are also very involved with our community with different programs such as Crime Stoppers, DARE, Drug Take Back, Citizen's Police Academy, and National Night Out. Job Description JOB TITLE: Police Officer DEPARTMENT: Police ACCOUNTABLE TO: Captain/Sergeant PRIMARY OBJECTIVE OF POSITION: Under the general, and occasional, direct supervision of the Patrol Sergeant, or Captain, is responsible for protecting the law-abiding citizen and enforcing the law through ongoing police work in the City. Work varies, exercising judgment within well established procedures and standards. ESSENTIAL JOB FUNCTIONS: Must be able to perform those duties normally associated with law enforcement work. Included are abilities to investigate, interrogate, evaluate, and document evidence in accidents, crimes, and other incidents within the police department operations. The physical requirements include sitting, walking, stooping, bending, running short distances, restraining, talking and hearing with clarity , viewing, climbing, crawling, ability to handle stress, and may be required to lift up to 75 lbs (greater with assistance). In the event of an emergency, must be able to lift up to own body weight. May be exposed to dangerous life threatening situations, hazardous materials and infectious disease. Must possess a South Dakota Law Enforcement Certificate, or have the ability to obtain a Certificate within one (1) year of employment; and a valid South Dakota Operator's License. MAJOR AREAS OF ACCOUNTABILITY AND PERFORMANCE: Performs the duties of a Police Officer; responds to dispatches and appears at the scene of disorder or crime, patrols assigned area, on foot or by car, inspects public establishments requiring licenses, and responds to domestic calls; responsible to perform the law enforcement activities of maintaining law and order, the protection of life and property, the regulation of traffic, reporting any hazards or dangers, the apprehension, arrest, and detection of law violators; directs and reroutes traffic around fires, accidents, or any other disruption of normal activity; carries out orders and enforces directions from the State and Federal Court Systems; shall meet the physical and professional requirements and certifications of a police officer as established by the South Dakota Law Enforcement Standards; may work nights, odd shifts, and during emergencies; performs other duties as may be assigned. May serve as the Code Enforcement Officer by assignment, assists departments with the abatement of nuisance violations, responds to alleged violations, performs inspections, conduct interviews, document and photograph evidence, and contact responsible parties; issues notices, tickets, and enforces ordinances and court directives; appears as a witness for hearings or court trials; distributes educational material to the public; and recommends changes to nuisance related policies, procedures, and ordinances. May serve as a School Resource Officer by assignment, works closely with the School Principals concerning school issues; provides classroom presentations; instructs D.A.R.E classes; addresses Civic Organizations on the duties and responsibilities of the job; counsels students on school behavior and law issues and compliance; and attends school functions. May act as Field Training Officer, supervise the SWAT Team, Fire Arms Instructor, Taser Instructor, D.A.R.E., or other assignments; may serve on the Department Hiring Board; Initiates reports and records reflecting daily, weekly, monthly, and annual activities; prepares reports on crime and traffic incidents as necessary; has access to information requiring confidentiality and discretion; responsible for equipment requiring accountability; contacts with fellow employees, the public, and other agencies are constant and involves communication of complex information requiring tact and diplomacy; work requires contact with unpredictable and uncontrollable physical conditions requiring care and use of proper personal safety equipment and procedures to prevent injury. SUPERVISION - RESPONSIBILITY FOR WORK OF OTHERS: Generally none EDUCATION, TRAINING, AND EXPERIENCE REQUIREMENTS: Must be a high school graduate or its equivalent, 21 years of age or older, two year technical degree in law enforcement or related field desired; Must possess, or have the ability to obtain a South Dakota Law Enforcement Certificate within one (1) year of employment; Must maintain all required Certifications during employment through continuing education and training programs; Possession of a valid driver's license. EXAMPLES OF PERFORMANCE CRITERIA AND QUALIFICATIONS: First and foremost responsibilities are of a Police Officer; Maintains and applies a thorough knowledge of current and new principles and practices of law enforcement; May serve as a School Resource Officer or as the Code Enforcement Officer by assignment; Maintains and exhibits discretion and integrity at all times; Maintains and applies thorough knowledge of federal, state, and local laws and ordinances which are enforced by the department; Establishes and maintains effective working relationships with fellow employees, other criminal justice agencies, courts, officials, and the public; May testify in Court or Hearings; Must maintain confidentiality when appropriate; Performs other assignments as directed. Management reserves the right to assign or reassign duties and responsibilities to this job at any time. COMPREHENSIVE BENEFIT PACKAGE TO INCLUDE: Health Insurance Plan Retirement Plan Term Life Insurance Plan Vacation / Sick Leave Hourly Salary starting at $22.25 We are now offering a $10,000.00 sign on bonus for certified South Dakota LE officers or reciprocity eligible candidates that successful pass the South Dakota reciprocity exam. For complete details, please contact our HR Director Nathan Hofer at ************. Qualifications • Must be a high school graduate or its equivalent, 21 years of age or older, two year technical degree in law enforcement or related field desired; • Must possess, or have the ability to obtain a South Dakota Law Enforcement Certificate within one (1) year of employment; • Must maintain all required Certifications during employment through continuing education and training programs; • Possession of a valid driver's license. Additional Information Application Packets Available At: City Finance Office 239 Wisconsin Ave SW PO Box 1369 Huron SD 57350 Phone: ************ Online: *********************************************** South Dakota Dept of Labor & Regulation 2361 Dakota Avenue South Huron SD 57350 Phone: ************ All your information will be kept confidential according to EEO guidelines.

If you want a solid CAREER with a great company...look no further!! Re-Bath is a growing company and is seeking remodeling installers who take pride in their work to join our team. Finish carpentry experience is strongly preferred, but we will train the right candidate. Good communication skills, ability to work alone or as a team, time management, and a valid driver's license and background check is a must. Very competitive wages based on experience. 50K-65K+ This position is based in Sioux Falls, SD We Offer: • Health Insurance • Paid time off (PTO) • Monday to Friday work week • No weekends required • Overtime pay • 401(k) with company match • Company truck, trailer, tools provided • Training and development Are you looking to grow in your career, with a company that highly values employee development? Apply today!

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Director, Data Center Services Center of Excellence Data Center COE Service Site Manager At ABB, we are dedicated to addressing global challenges. Our core values: care, courage, curiosity, and collaboration - combined with a focus on diversity, inclusion, and equal opportunities - are key drivers in our aim to empower everyone to create sustainable solutions. Write the next chapter of your ABB story. Your role and responsibilities In this role, you will have the opportunity to lead FWT, installation, commissioning, testing, and handover activities on-site, acting as the single point of contact for the customer. Each day, you will manage on-site presence throughout the project, ensuring coordination and smooth execution of all work activities. You will also showcase your expertise by planning, scheduling, and coordinating service resources based on guidelines. The work model for the role is remote (#LI-Remote) You will be mainly accountable for: * Plans project on-site activities with Project Manager including necessary local resources, equipment and milestones. * Coordinates agreement between customer and external resources on construction targets, health and safety requirements, site organization and policy. * Responsible, from receiving the assigned site area from the customer or Project Manager to handing over to the end customer on completion day, for coordinating all on-site activities to ensure the successful execution of start-up, construction, erection, testing and commissioning activities in alignment with contract specifications, quality standards, schedule, and safety requirements. * Serves as a project representative by building and maintaining effective relationships with customers as well as other local organizations such as authorities, banks, and suppliers to ensure their active support of field activities. * Ensures detailed and up-to-date construction Health & Safety (H&S) plan is in place in respect of each work package, compliant with the ABB H&S plan. * Ensures all on-site resources are properly trained on company health, safety and environment policy and proactively promotes health and safety considerations to project partners throughout the project. * Empowered to suspend any activities on site (be it by ABB personnel or by subcontractors) in case of HSE violation and, if a situation arises, takes the necessary steps to ensure that ABB employees and other persons who may be present are not put at risk. * Ensures correct handling, storage and installation of ABB-delivered equipment, coordinating on-site storage as well as shipment logistics to secure timely site delivery of equipment and material. * Manages the sub-contractors on site hired by ABB to ensure necessary quality and progress achieved to meet delivery date and agreed standards. * Controls project cost for the project site work, monitors actual spend against forecasts, and estimates final cost for the same. Manages the petty cash and has delegated authority for local purchasing within agreed limits. * Ensures all documentation is modified and updated as necessary, the document handling system is maintained, and latest revisions are used for the construction work on site. * Ensures (with HR support) that the area of responsibility is properly organized, staffed, skilled and directed. * Guides, motivates and develops direct and indirect reports within HR policies. Coordinates local accommodation, site facilities, office equipment, etc. Qualifications for the role * BS Engineering, BS Management required. * 5+ Years Field service project experience with an electrical OEM, experience leading long term field assignments, and field quality assurance delivery focusing on procedures and implementation. * Ability to travel 80-100% of the time within North America and ability to be away from home for extended periods. * Strong understanding of site commissioning and oversight of engineered solutions including IEC61850 projects. * Ability to develop and implement test, start-up, and commissioning plans with third party Cx agents. * Experience leading start-up teams responsible for ABB and GE LV and MV electrical equipment, relays, and PRN networks preferred. * Experience leading multidisciplinary site teams of electrical field engineers and technicians as well as third party contractors preferred. * Candidates must already have a work authorization that would permit them to work for ABB in the US. More about us ABB's Service Division partners with our customers to improve the availability, reliability, predictability and sustainability of electrical products and installations. The Division's extensive service portfolio offers product care, modernization, and advisory services to improve performance, extend equipment lifetime and deliver new levels of operational and sustainable efficiency. We help customers keep resources in use for as long as possible, extracting the maximum value from them, and then recovering and regenerating products and materials at the end of their useful life. We value people from different backgrounds. Apply today for your next career step within ABB and visit *********** to learn about the impact of our solutions across the globe. #MyABBStory ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their- sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ******************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer for Protected Veterans and Individuals with Disabilities, applicants may request to review the plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at **************. Protected Veterans and Individuals with Disabilities may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at ************** or by sending an email to ****************. Resumes and applications will not be accepted in this manner. While base salary is determined by things such as the successful applicant's qualifications and experience, this position is expected to pay between $98,700 and $157,920 annually and is eligible for a short-term incentive plan/annual bonus. my BenefitsABB.com We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.

What We Do We empower our defense and law enforcement customers to focus on their primary mission by removing friction points and setting them up for long-term success. VWI provides facilities and infrastructure management; our specific services include housing management, custodial services, facilities management, operations & maintenance, and various professional services. By providing strategic, responsive, and mission-driven solutions, we forge long-term partnerships with our customers, vendors, and team members. We invite you to join our team, providing essential services for those who serve our country. What You'll Do The Contract Maintenance Manager (CMM) is the key point of contact for all contract operations, responsible for the overall performance of operations and maintenance (O&M) services at the medical treatment facilities. This position ensures compliance with contract requirements, The Joint Commission (TJC), NFPA, OSHA, EPA, and other applicable standards. Serve as the contractor's on-site authority for all daily O&M contract matters. Provide immediate guidance during emergency situations and coordinate with the COR and FM. Ensure adequate staffing and resource allocation for 24/7/365 facility support. Manage reporting, scheduling, and compliance with facility maintenance and operations. Represent the contractor in meetings with government officials and stakeholders. Ensure that all maintenance activities support patient safety and mission readiness. What You'll Have Minimum of 5 years' experience in healthcare facility operations and maintenance, including at least 2 years supervising a 24/7 diversified workforce. Technical knowledge of healthcare facilities management and medical facility systems. Familiarity with codes and standards: TJC, NFPA, EPA, OSHA. Strong leadership, communication, and organizational skills. CHFM (Certified Healthcare Facility Manager) certification from ASHE is desirable. Ability to respond onsite within 1 hour for emergencies. What We Offer At VWI, our people are our greatest strength. Our respect for the skills and expertise of our employees drives every decision we make. We strive to uphold our values of respect, dignity, teamwork, and transparency in the benefits and compensation we offer to our employees. Medical, dental, and vision insurance, covered by employer-funded Health & Welfare contributions, as per SCA regulations. Paid Time Off and Vacation Days Opportunities for bonuses and compensation increase over and above guaranteed SCA wages. Opportunities for promotion to supervisor and management positions Leadership and development opportunities VWI is an Equal Opportunity Employer

Job DescriptionFIMCO Industries is currently hiring for the following Production positions at our Main Plant in North Sioux City: Paint Line Associates General Assemblers Production Workers work within the company-established guidelines to produce a quality product. The majority of positions are daytime hours, Monday-Friday, and occasional Saturdays as needed. We offer the following benefits to all production employees working full-time hours: Starting Pay at $17.00 an hour. Medical Dental Vision 401K Paid Holidays FIMCO Industries is headquartered in North Sioux City, SD, and is the largest manufacturer of lawn and garden sprayers in the United States. For over 60 years, FIMCO has built a sprayer for every application. From the 5-gallon homeowner model, up through a 300-gallon agricultural field sprayer. FIMCO has always taken great pride in innovation and has recently introduced the Volt Edge line of lithium-ion-powered ATVs and UTV sprayers, a first for the lawn and garden industry. In addition to manufacturing its own line of trailer carts, de-thatchers, lawn rollers, and dry material spreaders, FIMCO is also a parts distributor for some of the biggest names in spraying, such as TeeJet, Hypro, Banjo, and Norwesco.

To develop and evaluate new processes and improve current process capability, efficiency, and overall productivity in all areas of manufacturing in support of the Corporate WIN Strategy. Responsibilities Develop innovative solutions to complex engineering and manufacturing production problems through identification and implementation of advanced manufacturing processes including conducting process analysis, applying knowledge of product design, fabrication, assembly, tooling, and materials, conferring with suppliers, and soliciting observations from the operators/production technicians. Refine and enhance processes by applying continuous improvement and key Lean manufacturing/production principles and techniques to areas of production. Recommend product changes/improvements to Product Engineers. Improve manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. Coordinate input that may cross multiple teams or areas; make recommendations, and implement changes. Assure product and process quality by designing testing methods, testing finished product and process capabilities, and establishing standards to confirm and validate manufacturing process requirements. Determine root cause of failure using statistical methods (e.g., design of experiment, SPC) that may result in changes in design, tolerances, or processing methods. Evaluate capital equipment investments and prepare cost justifications. Design and prepare concept drawings of new equipment or modifications to existing equipment. Manage the overall implementations of capital equipment projects. Develop tooling and fixtures for new products and processes and work with tooling vendors to supply such designs. Identify and implement solutions for issues relating to safety, quality, productivity, and cost reductions. Prepare documentation for new manufacturing processes and engineering procedures. Prepare reports summarizing analyzed process information and trends. Share specialized knowledge with others. Represent Company on specific projects, lead and participate on project teams. Qualifications - Bachelor's Degree in related Engineering or Technology field and 5-7 years of related experience required. - Good math skills and familiarity with personal computer and CAD software required. - Must possess strong mechanical aptitude, ability to use basic measuring tools, and hands-on capabilities to work on projects without supervision. - Working knowledge of Microsoft Office and Lotus Notes preferred. Prefer Lean manufacturing, Six Sigma, project management, FMEAs, and quality systems experience. Parker Hannifin Parker Hannifin is a Fortune 250 global leader in motion and control technologies and systems. For more than a century the company has been enabling engineering breakthroughs that lead to a better tomorrow. Learn more at ************** or @parkerhannifin. Equal Employment Opportunity Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations. ("Minority / Female / Disability / Veteran / VEVRAA Federal Contractor") If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Know Your Rights: Workplace Discrimination is Illegal (eeoc.gov) and Genetic Information Discrimination

Work Monday - Thursday, occasional Fridays (Weekends off!) StarMark Cabinetry, a division of MasterBrand Cabinets LLC is looking to add Sprayers to our Finish team. BENEFITS * Full-time associates are IMMEDIATELY ELIGIBLE for all Insurance coverage including medical, dental, vision, life insurance, flexible spending accounts, plus voluntary benefits such as accident insurance, critical illness coverage, disability insurance and a pre-paid legal plan. * Associates are IMMEDIATELY ELIGIBLE to participate in our 401K with a 5% match. * Company-paid Life Insurance and Short-Term Disability for full-time associates * Generous Paid Time Off and 10 Paid Non-working Holidays for full-time associates * Associate appreciation/recognition programs * Individual incentives to recognize your attendance. * Scholarship program for dependents of employees * Employee Discounts * Other benefits offered dependent upon plant location, please check with HR for details Job Description Responsible for applying a variety of finishes to cabinets and parts, which may include toner, stain, tinted varnish, top coat, etc. Sprayers are expected to participate in the Sprayer Rotation program which will include wiping excess stain off product, hand sanding product using fine sandpaper, orbital and jitterbug sanders, and wiping excess glaze off of products on an overhead finish line. Requirements: * The ability to work with finishing chemicals and apply finish to cabinets using a spray gun to produce high quality products. * Ability to use hand-held sanding tools, including orbital sanders and jitterbug sanders. * Attention to detail * Ability to be NESHAP trained * The ability to lift, bend, push, pull, and move materials up to 50 lbs. * The ability to stand or walk an entire shift (10 hours shifts most days) * Must be 18 years of age, have reliable transportation, and the ability to work overtime as needed. * Previous experience working in a warehouse or manufacturing environment * Previous experience in assembly or a production-oriented environment. Qualifications ABOUT THE JOB After a 1-2 week training on the basics of cabinet making, AKA Cabinets 101, You will start your shift with an all-hands meeting to discuss production goals for the day, safety, and other plant matters. Together with your teammates, you will manufacturer or assemble cabinets or cabinet components to meet or exceed production goals while keeping our Four Basics in Mind * Safe and Clean Workplace * Quality at or above expectations * Complete on-time delivery * Fashionable products at a fair price YOUR ROLE: * Aligned- Make sure you and your team know the goals and objectives that need to be met! * Agile- Our demand and structure can change quickly, so make sure you are able to flex when needed. * Accountable- It takes YOU showing up to work each day for us to be a successful team and to meet our customer needs. Additional Information For nearly 70 years, MasterBrand has been shaping the places where people come together, enriching lives and creating meaningful memories for our customers. That, combined with our stylish products, expansive dealer and retail network, and dedicated associates, has helped make us the number one North American residential cabinet business. Our unique culture of continuous improvement is based on trusting the tools, empowering the team and moving forward, and is kept alive by our more than 14,000 associates across 20-plus manufacturing facilities and offices. Visit ******************* to learn more and join us in building great experiences together! Equal Employment Opportunity MasterBrand Cabinets LLC is an equal-opportunity employer. MasterBrand Cabinets LLC's policy is not to discriminate against any applicant or employee based on race, color, religion, sex, gender identity or expression, national origin, ancestry, age, disability/handicap status, marital status, military status, sexual orientation, genetic history or information, or any other basis protected by applicable federal, state or local laws. MasterBrand Cabinets LLC also prohibits harassment of applicants or employees based on any of these protected categories. It is also MasterBrand Cabinets LLC's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Reasonable Accommodations MasterBrand Cabinets LLC is committed to working with and providing reasonable accommodations to individuals with disabilities. If you have a disability and wish to discuss potential accommodations related to applying for employment, please contact us at ************************.

About the Role We're looking for skilled Maintenance Technicians & Mechanics to keep our production and facility equipment running at peak performance. In this role, you'll troubleshoot, repair, and maintain mechanical, electrical, pneumatic, and hydraulic systems to ensure smooth operations and zero downtime. What You'll Do Install, maintain, and repair food processing and production equipment. Diagnose and fix mechanical, electrical, pneumatic, and hydraulic issues. Read and interpret manuals and work orders to complete service tasks. Perform routine plant inspections and address potential issues proactively. Respond quickly to maintenance calls to keep production moving. Maintain utility systems to prevent downtime. Keep accurate records for safety, quality, and compliance. Follow all safety rules, PPE requirements, and food safety standards. Participate in required safety and quality training. Identify opportunities for continuous improvement. What We're Looking For Experience: Hands-on maintenance experience in a manufacturing or industrial setting. Skills: Strong mechanical and electrical troubleshooting skills; ability to work with pneumatic and hydraulic systems. Tech Savvy: Basic computer skills for work orders and documentation. Problem Solver: Ability to think on your feet and resolve issues quickly. Team Player: Good communication and time management skills. Preferred Qualifications Knowledge of ammonia refrigeration systems. Welding experience. Bilingual (English/Spanish). Associate degree in a technical field or equivalent experience. Additional Details Work Environment: Shop and plant setting with exposure to moving parts, vibration, temperature changes, and loud noise. Travel: Less than 5%. Requirements: High school diploma/GED, valid driver's license, minimum age 18. Ready to join a team that values safety, quality, and continuous improvement? Apply today and help us keep production running smoothly!