Quality Control Technician jobs at Dart Container - 261 jobs

Job Title: Quality Inspector Duration: 06 Months contract (Potential Temp to Perm) Payrate: $23.75/hr. Shift: 2nd shift, Mon-Fri, 1:45pm-10:15pm Description: Responsible for performing and recording dimensional and visual inspection of parts, assemblies, and final product in coordination with the Engineering, Production, and Manufacturing Engineering departments. Responsibilities: Conduct all levels of product inspections using a variety of inspection instruments and equipment (e.g. CMM, micrometers, calipers, parallels, sine bars, height masters, optical comparator, Johnson gauges, etc.) Verify compliance of finished hardware with drawing requirements based on shop practices as they relate to unfinished hardware. Perform both detailed, assembly-level drawings with appropriate supporting documentation verifying actual results against drawing and/or specification requirements. Correctly read and interpret detailed, assembly-level drawings and customer specifications. Use shop mathematical calculations relative to the complexity of the project (e.g., GD&T, tolerance stack-ups, calculations for areas, angles, lengths, etc.) Execute formal first article reports to AS9102 standards. Mentor inspectors, as needed. Use statistical process control (SPC) symbols and tools along with correct interpretation of associated control plans and charts. Meet deadlines of assigned jobs while maintaining the integrity of the position. Work closely with customer representatives during source inspections and audits. Seek lean process improvements. Requirements: High school diploma/GED 1 year certificate from college or technical school OR 3-5 years related experience and/or training US Citizenship required Skills: Good written and verbal communication skills Excellent problem-solving and analytical skills Keen attention to detail Ability to understand and conform to internal company procedures. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Familiarity with but not limited to: Database, Basic windows/internet browser, ERP/Inventory, Microsoft Office - Excel, Word, Power Point, Blueprint Reading, GD&T Terminology and Symbols, Material finishes, Raw Materials, Mechanical Inspection Blueprint reading capabilities Ability to lift 40lbs Teamwork and collaboration

Why Choose Us? Novolex is a leading manufacturer of food, beverage, and specialty packaging that supports multiple industries including foodservice, restaurant delivery and carryout, food processing, grocery and retail, and industrial sectors. Novolex manufacturing and sourcing expertise spans a diverse range of substrates including resin, paper, molded fiber, aluminum and more. We provide customers a broad array of stock and customized solutions with 120 product categories, 250 brands and over 39,000 SKUs. Our Sustainability Commitment The Novolex sustainability vision is built upon three pillars: our products, our operations and our people. Each is critically important to our growth and future as a business. These pillars form the foundation of our company-wide commitment to sustainability, helping us achieve our ambitious goals through our wide-ranging initiatives. Responsibilities Quality Technician II Walton, KY Compensation Includes: * Starting Pay Rate of $20.50 - 22.55/hour - depending on experience Overview This position is responsible for the activities of inspecting, testing, auditing and reporting on materials, processes, products, and finished goods to ensure conformance with company specifications and quality standards using variable measuring instruments and techniques. Responsibilities * Understand and apply Good Manufacturing Practices, standard operating procedures, quality procedures, customer requirements * Responsible for the testing of products and recording data * Notifying management of non-conforming material * Prepare daily quality/product reporting * Perform safety and quality audits * Record and save data in company database * Assist Quality Manager with AIB/BRC guideline compliance * Ensure all company safety standards are being utilized * Other duties as assigned Qualifications * At least one year of related experience Qualifications What You'll Get From Us Benefits With safety as our top priority and a commitment to employee well-being an important focus, we offer comprehensive and competitive benefits that include medical, dental and vision insurance as well as a variety of other well-being resources focused on mental, physical and financial health. Specific benefits and well-being programs may vary depending on where you work. Community Engagement At Novolex, giving back to the local communities that support us is important. Our Focused Giving Program prioritizes support for organizations whose missions promote sustainability initiatives or address food and hunger needs. We also encourage facility level support of activities in the communities where our employees live and work. Training and Development We offer constant opportunities for advancement. From skills development to advanced education programs, training and development programs and courses are available through MyLearning. Programs include company and industry training curricula, support for formal education through the Tuition Reimbursement Program, and a Learning Management System that supports and enhances employee skills at all levels of the organization. Novolex is committed to providing equal employment opportunity in all employment practices, including but not limited to selection, hiring, promotion, transfer, and compensation to all qualified applicants and employees without regard to age, race, color, national origin, sex, pregnancy, sexual orientation, gender identity, religion, handicap or disability, genetics, citizenship status, service member or veteran status, or any other category protected by federal, state, or local law. Any individual who, because of his or her disability, needs an accommodation in connection with an aspect of the Company's application process should contact my **********************. Responsibilities Quality Technician II Walton, KY Compensation Includes: - Starting Pay Rate of $20.50 - 22.55/hour - depending on experience Overview This position is responsible for the activities of inspecting, testing, auditing and reporting on materials, processes, products, and finished goods to ensure conformance with company specifications and quality standards using variable measuring instruments and techniques. Responsibilities - Understand and apply Good Manufacturing Practices, standard operating procedures, quality procedures, customer requirements - Responsible for the testing of products and recording data - Notifying management of non-conforming material - Prepare daily quality/product reporting - Perform safety and quality audits - Record and save data in company database - Assist Quality Manager with AIB/BRC guideline compliance - Ensure all company safety standards are being utilized - Other duties as assigned Qualifications - At least one year of related experience

the last 24 hours of plant operation. Deal with any issues that need immediate attention with priority given to the containment of any suspect product. Review schedule and tour the floor assuring all machines are following schedule and proper labeling is being performed. Must also look for line clearance issues Review hold ware and bring to production what can be sorted or ground Attend any scheduling meetings Communicate all daily issues with the quality manager Work with all supervisors in assisting them with any quality issues and/or quality technician issues Assure all start-ups meet target specs and/or are within spec after exhausting all efforts to reach target Reporting in SQL mold maintenance program all issues with tooling that is causing quality issues or our goal of reaching target specs Before leaving for the day, go over with supervisor and lab techs all pending issues and review communication documentation

Job Title: Technician, Quality Reports To: Manager, Quality Buffalo, NY FLSA Status: Non-Exempt Responsible for quality system processes designed to ensure continuous flow of incoming and outgoing materials consistent with established standards and regulations including FDA 21 CFR 820, ISO 13485, and appropriate EU regulations. Ensures compliance in QC areas including review and generation of information for incoming materials and product release. Ensures compliance in the areas of equipment qualification and calibration, supplier qualification and management, and document control as needed. Ensures continued improvement and compliance with relevant FDA, ISO 13485, and EU regulations by participating in audit responses, and deviation, nonconformance, complaint, and CAPA processes as necessary. Promotes and participate in training activities related to the quality management system and product quality, safety and efficacy. Key Responsibilities: Responsible for performing final QC checks on all outgoing product shipments, which includes reviewing and assuring accuracy of both documentation and product. Responsible for release of incoming materials, manufactured materials, and finished products according to written specifications. Assist with the maintenance of the equipment qualification and calibration program and upkeep of the equipment database. Assist the QA/QC Manager with review and filing of calibration certificates, out of tolerance reports, deviations, and SCARs as necessary. Assist with the development and implementation of company SOPs as assigned. Perform document control and training activities as assigned. Requires an ability to complete cGMP documentation accurately, in accordance with standard operating procedures, and in a timely manner. Requires an ability to work independently to accomplish given tasks within given timelines. Requires an ability to multitask and adjust to changing priorities. Must report any deviations or nonconformities immediately to a Manager or Director. Other duties as assigned. Education: Associate's Degree in related field or equivalent work experience Experience: 1 or more years of previous related experience Minimum Requirements/Qualifications: Good communication and organizational skills and ability to multitask. Prior experience with ISO 13485 and 21 CFR 820 a plus. Thrives in a fast-paced, collaborative environment, efficiently works under pressure, within deadlines or other time essential constraints Excellent communication skills, both written and verbal, to clearly and concisely communicate to all levels of the organization Strong work ethic and an ability to excel within a rapidly changing and growing organization Physical Requirements/Working Conditions: Control exposures to hazardous chemicals & other safety hazards such as: Carcinogens. Strong and obnoxious fumes. Sharp and dangerous blades and needles. Biohazard exposure to specimens. Compensation & Benefits: Salary Range: $22/hr-$24/hr, depending on location, experience, and qualifications. Benefits coverage begins day 1, including the following: Medical, Dental, Vision Insurance Disability Insurance Life Insurance 401(k) company match Paid Time Off (15 days annually) Paid Holiday time (10 company-designated days) Tuition Assistance Additional benefits available with company package This position has not been approved for Relocation Assistance. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this job. They are not an exhaustive list of all of the duties and responsibilities associated with it. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.

Job Description Job Title: Technician, Quality Reports To: Manager, Quality Buffalo, NY FLSA Status: Non-Exempt Responsible for quality system processes designed to ensure continuous flow of incoming and outgoing materials consistent with established standards and regulations including FDA 21 CFR 820, ISO 13485, and appropriate EU regulations. Ensures compliance in QC areas including review and generation of information for incoming materials and product release. Ensures compliance in the areas of equipment qualification and calibration, supplier qualification and management, and document control as needed. Ensures continued improvement and compliance with relevant FDA, ISO 13485, and EU regulations by participating in audit responses, and deviation, nonconformance, complaint, and CAPA processes as necessary. Promotes and participate in training activities related to the quality management system and product quality, safety and efficacy. Key Responsibilities: Responsible for performing final QC checks on all outgoing product shipments, which includes reviewing and assuring accuracy of both documentation and product. Responsible for release of incoming materials, manufactured materials, and finished products according to written specifications. Assist with the maintenance of the equipment qualification and calibration program and upkeep of the equipment database. Assist the QA/QC Manager with review and filing of calibration certificates, out of tolerance reports, deviations, and SCARs as necessary. Assist with the development and implementation of company SOPs as assigned. Perform document control and training activities as assigned. Requires an ability to complete cGMP documentation accurately, in accordance with standard operating procedures, and in a timely manner. Requires an ability to work independently to accomplish given tasks within given timelines. Requires an ability to multitask and adjust to changing priorities. Must report any deviations or nonconformities immediately to a Manager or Director. Other duties as assigned. Education: Associate's Degree in related field or equivalent work experience Experience: 1 or more years of previous related experience Minimum Requirements/Qualifications: Good communication and organizational skills and ability to multitask. Prior experience with ISO 13485 and 21 CFR 820 a plus. Thrives in a fast-paced, collaborative environment, efficiently works under pressure, within deadlines or other time essential constraints Excellent communication skills, both written and verbal, to clearly and concisely communicate to all levels of the organization Strong work ethic and an ability to excel within a rapidly changing and growing organization Physical Requirements/Working Conditions: Control exposures to hazardous chemicals & other safety hazards such as: Carcinogens. Strong and obnoxious fumes. Sharp and dangerous blades and needles. Biohazard exposure to specimens. Compensation & Benefits: Salary Range: $22/hr-$24/hr, depending on location, experience, and qualifications. Benefits coverage begins day 1, including the following: Medical, Dental, Vision Insurance Disability Insurance Life Insurance 401(k) company match Paid Time Off (15 days annually) Paid Holiday time (10 company-designated days) Tuition Assistance Additional benefits available with company package This position has not been approved for Relocation Assistance. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this job. They are not an exhaustive list of all of the duties and responsibilities associated with it. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.

This position is responsible for manufacturing product by vialing detection/capture antibodies, calibrators, or assembling antibody set products. DUTIES AND RESPONSIBILITIES Responsible for preparing manufacturing records, dilution and blending of anitbody/calibrator materials, assemble vial sets, and printing of labels as instructed by Standard Operating Procedures (SOP) in order to produce final goods products for MSD customers. Performs peer review of product labels prior to vialing as the first quality check in the production process. May operate automated vialing, bottling, labeling, or lyphilizing equipment May handle BSL-2 reagents to produce calibrator products. Provides input to improve routine manufacturing processes that provide for better quality and quantity of products. Participates in 5S initiatives by maintaining and improving laboratory tidiness and efficiency. Completes appropriate documentation to support process and production procedures including data entry and batch records and daily maintenance and documentation of all production equipment Participates in general laboratory maintenance including maintaining laboratory cleanliness, supplies and equipment to include but not limited to: preparing, maintaining and reporting reagent inventories, maintain pipette calibration schedules, participating in year-end physical inventory, and defrosting freezers. Specific duties may vary depending upon departmental requirements. EXPERIENCE AND QUALIFICATIONS Associate's degree in Biology, Chemistry, Biotechnology, Engineering or related field field or equivalent work experience. Prior manufacturing experience a plus. KNOWLEDGE, SKILLS AND ABILITIES Demonstrates an aptitude for learning and adhering to standard laboratory techniques and safety precautions. Basic knowledge of scientific fundamentals. Basic knowledge of pipetting. Ability to follow laboratory safety instructions; ability to use protective equipment. Excellent oral, written communication and interpersonal skills. Effectively communicate issues/problems and results that impact timelines, accuracy and reliability of laboratory data. Proficiency in MS Office Suite. Ability to multi-task and work productively in a demanding manufacturing environment with changing priorities. Basic knowledge of cGMP and/or ISO certification highly preferred. Ability to utilize equipment necessary to perform the essential duties of the job. Ability to move/lift up to 25 pounds. PHYSICAL DEMANDS Utilize equipment necessary to perform the job, and lifting up to 25 lbs. Up to 80% of the day may be spent at a laboratory bench. WORK ENVIRONMENT Standard industrial laboratory environment COMPENSATION SUMMARY: The annual base salary for this position ranges from $45,500 to $66,000. This salary range represents a general guideline as MSD considers other factors when presenting an offer of employment, such as scope and responsibilities of the position, external market factors, and the candidate's knowledge, skills, abilities, education and experience. Employees may qualify for a discretionary or non-discretionary bonus in addition to their base salary. These annual bonuses are intended to recognize individual performance and enable employees to benefit from the Company's overall success. BENEFITS SUMMARY: At MSD, we offer a comprehensive benefits package to support our employees' well-being and financial security. In addition to competitive salaries, our benefits include medical, dental, and vision coverage, along with prescription benefits. We provide a 401(k) plan with company matching, flexible spending accounts, and company-paid short- and long-term disability insurance as well as group life and accidental death and dismemberment insurance. Our offerings also encompass paid vacation, paid sick leave, paid holidays, and paid parental leave, along with an employee assistance program. Additional voluntary perks include a fitness club membership contribution, pet insurance, identity theft protection, home and auto insurance discounts, and optional supplemental life insurance. EEO/AA STATEMENT: MSD is an Equal Opportunity/Affirmative Action Employer. We are committed to fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. We welcome applications from all qualified candidates, making employment decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, genetic information, marital status, national origin, age, protected veteran status, pregnancy, disability status, or any other protected characteristic. For our full EEO/AA and Pay Transparency statement, please click on the following link: https://www.mesoscale.com/en/our_company/careers/equal_employment_opportunity_statement. Meso Scale Diagnostics uses E-Verify to validate the work eligibility of candidates.

The Dolese Promise is built on a foundation of integrity driven by our passion for quality, safety, and reliability. We are one of Oklahoma's most respected employee-owned companies because of our people and our values. We strongly believe in positively impacting our communities through our products, our actions, and our financial support. Being a part of the Dolese team affords a unique opportunity to join an organization that rewards its owners through profit sharing. Our employees are one of our most important resources, which is why we promise to deliver. Dolese Delivers: Stable Foundation Treat with Respect Safe Environments Employee Focus JOB SUMMARY: Responsible for the sampling, inspecting and testing of all produced materials (aggregate, sand, etc.) and compare against specifications. This position works the 3rd shift. KEY RESPONSIBILITIES/ESSENTIAL FUNCTIONS: Work safely and take actions to prevent all unsafe actions, processes, and behaviors. Obtain samples on various fine and coarse aggregate products following ASTM and ODOT standards. Capable of performing a particle size analysis of coarse and fine aggregate according to ASTM and ODOT Specifications. Capable of testing flat and elongated particles in coarse aggregate according to ASTM, AASTO and ODOT Specifications. Preparing samples of products for customers and testing laboratories. Records and maintains test data and other required information. This includes both written records and data input into a personal computer. Ability to analyze and report basic trends in test data. Performs necessary housekeeping functions in laboratory area. Performs daily maintenance on lab and test equipment. Regular, reliable attendance at the worksite or assigned work location. Other duties and responsibilities related to the nature of the job may be assigned on a temporary or permanent basis as needed. REQUIRED QUALIFICATIONS: Experience/Education/Skill Possess a safe work history. Have a positive attitude and proactive approach to our safety program. Ability to read, write and figure mathematical calculations Good observation skills. Self-motivated, organized and has the ability to work without direct supervision Excellent verbal, written and comprehension communication skills. Must work well with others in a team environment. Excellent interpersonal skills and a positive attitude that fosters effective relationships. Must be able to quickly understand and adhere to safety requirements of this position. Willingness and ability to work a flexible schedule, including swing shift, graveyard shift, over time and weekends as required. Ability to work near, around or on light or heavy equipment. PHYSICAL REQUIREMENTS: Lift objects repeatedly of various dimensions and up to 100lbs. of weight Ability to repeatedly climb stairs and climb ladders Ability to repeatedly balance, bend from the trunk, crawl, kneel, push and pull objects Ability to tolerate working in all environmental temperatures and weather conditions Ability to repeatedly reach, squat and tolerate prolonged standing / walking / sitting Ability to repeatedly walk on uneven surfaces EEO Statement: We consider applicants for all positions without regard to race, color, religion, sex, national origin, age, genetics, marital or protected veteran status. Dolese provides 'reasonable accommodations' to qualified individuals with disabilities in accordance with the American with Disabilities Act and applicable state and local laws. If you need a reasonable accommodation in order to complete the application process please contact the Human Resources Director.

The Dolese Promise is built on a foundation of integrity driven by our passion for quality, safety, and reliability. We are one of Oklahoma's most respected employee-owned companies because of our people and our values. We strongly believe in positively impacting our communities through our products, our actions, and our financial support. Being a part of the Dolese team affords a unique opportunity to join an organization that rewards its owners through profit sharing. Our employees are one of our most important resources, which is why we promise to deliver. Dolese Delivers: * Stable Foundation * Treat with Respect * Safe Environments * Employee Focus JOB SUMMARY: Responsible for the sampling, inspecting and testing of all produced materials (aggregate, sand, etc.) and compare against specifications. This position works the 3rd shift. KEY RESPONSIBILITIES/ESSENTIAL FUNCTIONS: * Work safely and take actions to prevent all unsafe actions, processes, and behaviors. * Obtain samples on various fine and coarse aggregate products following ASTM and ODOT standards. * Capable of performing a particle size analysis of coarse and fine aggregate according to ASTM and ODOT Specifications. * Capable of testing flat and elongated particles in coarse aggregate according to ASTM, AASTO and ODOT Specifications. * Preparing samples of products for customers and testing laboratories. * Records and maintains test data and other required information. This includes both written records and data input into a personal computer. * Ability to analyze and report basic trends in test data. * Performs necessary housekeeping functions in laboratory area. * Performs daily maintenance on lab and test equipment. * Regular, reliable attendance at the worksite or assigned work location. * Other duties and responsibilities related to the nature of the job may be assigned on a temporary or permanent basis as needed. REQUIRED QUALIFICATIONS: Experience/Education/Skill * Possess a safe work history. * Have a positive attitude and proactive approach to our safety program. * Ability to read, write and figure mathematical calculations * Good observation skills. * Self-motivated, organized and has the ability to work without direct supervision * Excellent verbal, written and comprehension communication skills. * Must work well with others in a team environment. * Excellent interpersonal skills and a positive attitude that fosters effective relationships. * Must be able to quickly understand and adhere to safety requirements of this position. * Willingness and ability to work a flexible schedule, including swing shift, graveyard shift, over time and weekends as required. * Ability to work near, around or on light or heavy equipment. PHYSICAL REQUIREMENTS: * Lift objects repeatedly of various dimensions and up to 100lbs. of weight * Ability to repeatedly climb stairs and climb ladders * Ability to repeatedly balance, bend from the trunk, crawl, kneel, push and pull objects * Ability to tolerate working in all environmental temperatures and weather conditions * Ability to repeatedly reach, squat and tolerate prolonged standing / walking / sitting * Ability to repeatedly walk on uneven surfaces EEO Statement: We consider applicants for all positions without regard to race, color, religion, sex, national origin, age, genetics, marital or protected veteran status. Dolese provides 'reasonable accommodations' to qualified individuals with disabilities in accordance with the American with Disabilities Act and applicable state and local laws. If you need a reasonable accommodation in order to complete the application process please contact the Human Resources Director.

Quality Technician Reports to:Assistant Quality Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers' standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: Know & understand the use of all inspection equipment including (but not limited to): Micrometers Calipers Dial Indicators Height Gages Optical Comparators Gage Pins and Gage Blocks Sine Blocks and Setups Surface Finish Testers CMM Thread Gages Understand basic Geometric Tolerance. Able to read and understand drawings Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949 Ability to multitask in response to numerous demands; time management skills Computer literate: Excel, Word, etc. Attention to detail Desired Skills: Experience with inspection and measuring equipment calibration Previous auditing experience and skills Experience writing procedures and work instructions PPAP documentation experience Specific Duties: Perform first piece, in-process and final inspections Provide inspection results to Quality Engineer for inclusion in PPAP's Understand cosmetic part requirements based on specific customer standards Provide inspection support based on needs of Manufacturing and Engineering Managers Maintain up to date documentation by completing all necessary paperwork i.e. in-process inspection records, signing off on travelers, 1st piece inspection tags, etc. Perform basic training as required for operator or team leader for First-Piece and In-Process Inspection Provide continuous feedback to the Assistant Quality Manager regarding quality, engineering and manufacturing-related issues Suggest process improvements Perform part and process related internal audits Maintain QA Lab and equipment in clean, orderly condition Special projects and assignments Physical Requirements: Regularly lifts and/or moves 25-50 pounds Requires frequent reaching, handling and grasping Requires occasional climbing of stairs, balancing, bending, crouching, fine manipulation and feeling This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Quality Technician Reports to: Assistant Quality Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers' standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: Know & understand the use of all inspection equipment including (but not limited to): Micrometers Calipers Dial Indicators Height Gages Optical Comparators Gage Pins and Gage Blocks Sine Blocks and Setups Surface Finish Testers CMM Thread Gages Understand basic Geometric Tolerance. Able to read and understand drawings Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949 Ability to multitask in response to numerous demands; time management skills Computer literate: Excel, Word, etc. Attention to detail Desired Skills: Experience with inspection and measuring equipment calibration Previous auditing experience and skills Experience writing procedures and work instructions PPAP documentation experience Specific Duties: Perform first piece, in-process and final inspections Provide inspection results to Quality Engineer for inclusion in PPAP's Understand cosmetic part requirements based on specific customer standards Provide inspection support based on needs of Manufacturing and Engineering Managers Maintain up to date documentation by completing all necessary paperwork i.e. in-process inspection records, signing off on travelers, 1st piece inspection tags, etc. Perform basic training as required for operator or team leader for First-Piece and In-Process Inspection Provide continuous feedback to the Assistant Quality Manager regarding quality, engineering and manufacturing-related issues Suggest process improvements Perform part and process related internal audits Maintain QA Lab and equipment in clean, orderly condition Special projects and assignments Physical Requirements: Regularly lifts and/or moves 25-50 pounds Requires frequent reaching, handling and grasping Requires occasional climbing of stairs, balancing, bending, crouching, fine manipulation and feeling This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Requirements QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires a high degree of self-motivation and good organizational skills. Two to four months of training are required to properly prepare a person for this position. EDUCATION and/or EXPERIENCE: Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to walk, sit, and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: ***************************************.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Chili, NY SUMMARY: Tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. This position can present the motivated employee with several career options as the company grows and he/she gains expertise and knowledge. HOURS: 7pm - 7am on a 2-2-3 scheduled ESSENTIAL DUTIES AND RESPONSIBILITIES: Performs visual inspections and physical tests utilizing equipment in Lab. Products are tested for a variety of qualities such as dimensions, performance or chemical characteristics. Records and evaluates test data and writes reports. Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Enters data into computer for analysis. Prepares certificates of analysis on finished product for our customers. Able to use and read measuring instruments as well as operating instructions and procedure manuals. Trial reports, inspection and tracking. Assist QA and Technical departments in their duties. Must take responsibility for work assigned. Effective communication skills, both verbal and written. Support and follow all plant Safety Rules, GMPs, and other procedural training requirements. Requirements QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires a high degree of self-motivation and good organizational skills. Two to four months of training are required to properly prepare a person for this position. EDUCATION and/or EXPERIENCE: Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to walk, sit, and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: ***************************************.

Job DescriptionDescription: At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Chili, NY SUMMARY: Tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. This position can present the motivated employee with several career options as the company grows and he/she gains expertise and knowledge. HOURS: 7pm - 7am on a 2-2-3 scheduled ESSENTIAL DUTIES AND RESPONSIBILITIES: Performs visual inspections and physical tests utilizing equipment in Lab. Products are tested for a variety of qualities such as dimensions, performance or chemical characteristics. Records and evaluates test data and writes reports. Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Enters data into computer for analysis. Prepares certificates of analysis on finished product for our customers. Able to use and read measuring instruments as well as operating instructions and procedure manuals. Trial reports, inspection and tracking. Assist QA and Technical departments in their duties. Must take responsibility for work assigned. Effective communication skills, both verbal and written. Support and follow all plant Safety Rules, GMPs, and other procedural training requirements. Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires a high degree of self-motivation and good organizational skills. Two to four months of training are required to properly prepare a person for this position. EDUCATION and/or EXPERIENCE: Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to walk, sit, and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: ***************************************.

General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: Know & understand the use of all inspection equipment including (but not limited to): Micrometers Calipers Dial Indicators Height Gages Optical Comparators Gage Pins and Gage Blocks Sine Blocks and Setups Surface Finish Testers CMM Thread Gages Understand basic Geometric Tolerance. Able to read and understand drawings Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949 Ability to multitask in response to numerous demands; time management skills Computer literate: Excel, Word, etc. Attention to detail Desired Skills: Experience with inspection and measuring equipment calibration Previous auditing experience and skills Experience writing procedures and work instructions PPAP documentation experience

General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: Know & understand the use of all inspection equipment including (but not limited to): Micrometers Calipers Dial Indicators Height Gages Optical Comparators Gage Pins and Gage Blocks Sine Blocks and Setups Surface Finish Testers CMM Thread Gages Understand basic Geometric Tolerance. Able to read and understand drawings Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949 Ability to multitask in response to numerous demands; time management skills Computer literate: Excel, Word, etc. Attention to detail Desired Skills: Experience with inspection and measuring equipment calibration Previous auditing experience and skills Experience writing procedures and work instructions PPAP documentation experience

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. You will provide quality assurance support aligned to increase internal and outgoing quality levels, supporting overall customer satisfaction of our products. Key job responsibilities Performs basic and routine receiving, in-process, and final product inspections and testing. Determines and uses appropriate measuring tools and equipment to verify dimensional and functional requirements. Participates in problem solving activities for both product and manufacturing processes. Performs basic process and product monitoring for quality. Performs containment activities preventing potential or additional quality defects Assists with product reviews and analysis to determine root cause and/or disposition; supports processing non-conformances (NC) to closure. Performs FAI as directed, and reports results. Effectively communicates with appropriate areas as needed (supply, manufacturing, engineering, quality, customer service, production planning, logistics, etc.). Provides process audit support in designated areas. Assists in basic calibration of inspection, test, and measurement equipment. Observes all applicable safety rules and reporting any unsafe conditions or potential safety hazards. Responsible for managing the ESN label database, including creating and revising labels for accuracy. Performs other related duties as assigned. Qualifications and Experience High school diploma or G.E.D. Bachelors in technical field preferred. Ideally 1+ years experience working in quality preferred. Ideally 1+ years experience using measurement tools and techniques preferred. Strong mechanical aptitude. Ability to use common measuring equipment (e.g., Calipers, micrometer, paint mil gauges, go / no-go gages, etc.). Ability to understand and use work instructions and procedures, and complete forms. Good written and verbal communication skills. Skills to quickly learn and operate a wide variety of test and measurement equipment. Skills in attention to detail and accuracy. Ability to apply basic math and geometry. Skill in using personal computers including Microsoft Office applications (Word, Excel, Outlook, etc.). Ability to operate hand tools. Ability to lift up to 50 lbs. Ability to stand and walk frequently. Experience with Quality Management Systems preferred. WE HAVE: A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. Our principal office is in London and our management office in the United States is in Minneapolis. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE. Learn more at ************** Commitment to strengthen communities where our employees live and work We encourage and support the philanthropic activities of our employees worldwide Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: Innovative & adaptable Dedicated to absolute integrity Focused on the customer first Respectful and team oriented Optimistic and energizing Accountable for performance Benefits to support the lives of our employees Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for full-time employees that includes: Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. A 401(k) retirement plan and an employee stock purchase plan - both include a company match. Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth.

Job DescriptionDescription: At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: Tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. This position can present the motivated employee with several career options as the company grows and he/she gains expertise and knowledge. ESSENTIAL DUTIES AND RESPONSIBILITIES: Performs visual inspections and physical tests utilizing equipment in Lab. Products are tested for a variety of qualities such as dimensions, performance or chemical characteristics. Records and evaluates test data and writes reports. Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Enters data into computer for analysis. Prepares certificates of analysis on finished product for our customers. Able to use and read measuring instruments as well as operating instructions and procedure manuals. Trial reports, inspection and tracking. Assist QA and Technical departments in their duties. Must take responsibility for work assigned. Effective communication skills, both verbal and written. Support and follow all plant Safety Rules, GMPs, and other procedural training requirements. Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires a high degree of self-motivation and good organizational skills. Two to four months of training are required to properly prepare a person for this position. EDUCATION and/or EXPERIENCE: Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to walk, sit, and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: ***************************************.

Shift: Day Shift Job Function: The Quality Inspector is responsible for the accurate inspection of production and prototype hardware using predetermined methods, operations, setups, and prescribed specifications to perform in-process and final inspections of machined parts and assemblies. Undergoes and carries out acquired training across various operational functions throughout the scope of the Inspection Dept., proactively improving the capability and capacity of operations. This position reports to the Quality Inspection Supervisor. Primary Responsibilities: * Confirm specifications, conducting visual and measurement tests in accordance with standard operating procedures. * Reject parts and assemblies that fail to meet specifications in accordance with standard operating procedures. * Measure parts with calipers, gauges, or micrometers. * Perform inspections in accordance with technical documentation. * Operate electronic inspection equipment and software. * Document inspections by completing required logs and forms. * Input data into electronic quality database. * Assist in maintaining measurement equipment by following operating instructions and calibration requirements; report repairs according to departmental instructions. * Follow all standard operation procedures. * Adhere to AS9100 and other quality standards. * Assist supervisor/manager, as needed, with various audits and compliance projects. * Report quality concerns to supervisor and/or management personnel. * Maintain safe and healthy work environment by following standards and procedures and complying with legal regulations. * Actively participate in training across prescribed Inspection functions, thereby fostering increased efficiency and product conformance. * Support departments in the day-to-day production of parts and assemblies. * Perform other duties and projects as assigned. Requirements: * Must have High school diploma or equivalent- documentation required * Must have basic math skills * Must meet ITAR definition of US Person(s)- documentation required * Ability to work in a team environment that promotes high morale, teamwork, pride, productivity and excellent quality * Demonstrated ability to accurately and effectively perform assigned tasks and interpret results of inspections * Ability to meet critical deadlines and work in fast-paced environment * Basic computer knowledge; interfacing in PC environment * Attention to detail and strong analytical skill * Must be able to follow verbal and written instructions in English * Must be able to communicate information to others verbally and in writing in English * 20/25 vision (natural or corrected) required * Work independently with minimal supervision * Ability to perform overtime when necessary * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment drug testing will be required. Rate: $18- 20 Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to remain stationary; sit for long periods of time, use hand to finger, handle, feel, stand, move throughout the facility, and reach with hands and arms. The employee is occasionally required to traverse stairs, climb or balance and stoop, kneel, crouch, or crawl. The employee must frequently lift, and/or position materials up to 15 pounds and occasionally lift and/or move up to 50 pounds with or without assistance. Work in manufacturing environment and use of computer (typical 2-button scroll mouse and keyboard - 35% of the work day). Specific vision abilities are required by this job include close vision, depth perception, and the ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, please submit your resume noting Job #**********NY to ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

Job Description Key Responsibilities Quality Control on the Shop Floor Conduct in-process and final inspections of signage and architectural products after shipping. Verify that each unit matches design specifications, client requirements, and installation drawings. Identify, document, and report any deficiencies, defects, or deviations from standards. Approve or reject products based on established quality criteria. Root Cause Analysis & Prevention Investigate the root cause of non-conformities using structured problem-solving methods (e.g., 5 Whys, Fishbone Diagram). Collaborate with Production, Design, and Installation teams to implement corrective and preventive actions. Maintain a non-conformity log and track the effectiveness of corrective measures. Recommend process or material changes to eliminate recurring quality issues. Cross-Department Quality Handover System Develop and implement a “department-to-department” quality sign-off process, ensuring that: Each department verifies and approves work after passing it forward. All work meets project specs, documentation requirements, and visual standards. Train department leads and staff on handover inspection criteria and the importance of internal quality assurance. Field Installation Readiness Ensure products are fully compliant with installation requirements to minimize adjustments, modifications, or delays on-site. Provide clear installation notes or flags when special handling or sequencing is needed. Continuous Improvement & Training Propose and lead quality improvement projects to reduce NCs and rework. Provide quality awareness training for production staff, focusing on: Specification compliance. Common defects and how to prevent them. Importance of first-time-right production. Stay up to date with industry best practices in signage and architectural fabrication quality. Performance Metrics Reduction in non-conformities per month. Reduction in rework hours and re-shipping costs. Percentage of products passing final inspection without defects. Number of installation site issues reported. Employee compliance with handover sign-off process. Qualifications & Skills Experience in manufacturing quality control, ideally in signage, architectural products, or related industries. Training or certification in quality management (e.g., ISO 9001, Six Sigma, or equivalent). Strong knowledge of fabrication processes, materials, and finishing techniques. Skilled in reading and interpreting technical drawings. Proficient in root cause analysis and corrective action planning. Strong communication skills to work effectively across departments. Ability to work independently and take initiative. Authority Authority to stop production or shipment of products that do not meet quality standards. Authority to request rework or adjustments after release. Authority to recommend changes in processes or materials to improve quality outcomes. Responsibilities Promote quality culture (Core Driver). Set quality vision & objectives. Approve quality policies. Oversee company-wide quality standards. Implement quality control processes. Conduct audits/inspections. Review non-conformities. Take action. Train on quality standards.