Day Wireless Systems jobs - 27 jobs

Install a variety of different equipment, wiring, and electrical systems into vehicles. Qualified candidates must be capable and comfortable removing OEM vehicle interior trim with complete wiring and electrical system. Experience with soldering, wire routing, wire protection, fusing, multi-voltage charging systems, relays/Switching/Integration is a plus. Experience with 12-volt installations experience, preferably with GPS, alarms, low-voltage mobile electronics, or stereos is preferred. Experience installing mobile electronic equipment into vehicles is highly preferred. Essential Functions/Major Responsibilities: Perform installations of fixed & wireless communications equipment by assembling and bolting equipment into vehicles by using guidelines. Limited supervision by the of Lead or Service manager. Be able to do a complete mobile installation, communication equipment install as well as being able to remove vehicle interior and wiring (or rewiring) a complete electrical system. Install electrical wiring harnesses, connect electrical fittings, drill holes, soldering and perform all physical tasks associated with upfitting vehicles. Develop efficient wiring routes throughout the vehicle and enable future replacement and/or troubleshooting Remove and disassemble OEM vehicle interiors when necessary. Perform quality control tasks in preparing the vehicles for departure as well as to ensure all parts are fitted and screwed in properly. Troubleshoot and diagnose problems with equipment as necessary. Maintain safe, clean and orderly tools and work area. Continuous learning in new products, skills techniques from colleagues and manufacturers Installations may be at the shop location or at a customer's site. Inventory/assemble parts and stage the installation prior to install to ensure correct parts available. Complete job tickets and time sheets to record installation work. Maintain positive customer relations and communication additional information when needed. Must be able to travel, this may be local, daily travel or overnight travel. Other duties as assigned. QualificationsExperience and Education: High School diploma is required, any additional education or trade school training of electrical, wiring, automotive is preferred. Experience working in an auto body shop Experience installing car stereo and electronic equipment highly preferred Experience removing the interior trim of vehicles Basic understanding of electrical theory and low-voltage electronics Completes job tickets, sales orders, and other required work documents. Willingness to train other Mobile Installation Technicians Knowledge of hand and power tools is required Possess the drive and mental aptitude to work safely with tools and understand auto-wiring. Self-motivated, professional, listen and follow directions of Service Manager Work well under pressure in a fast-paced environment. Be able to follow directions; evaluate problems and prioritize tasks. Ability to work well in small teams Licenses, Certifications: Valid Driver's License **Clean Driving Record is required ** (Major infractions are a disqualifier. ex: DUI, any drug motor vehicle offence, hit & run, reckless driving infractions, driving while suspended, passing a stopped school bus, involvement in a fatal accident, or 3 or more minor infractions within 3 year period) Current Basic MECP Certified or prior certification

Summary: Position provides administrative support to the Service Center/or Department in the areas of billing, collections, customer service, purchasing, report generation and analysis, inventory control, payroll, shipping and receiving. Depending on the department or Service location, administrative duties may vary. Essential Functions: Tasks that must be performed by the person in this job. Reasonable accommodation(s) may be requested to enable individuals to perform the essential functions. Ability to continually be organized, multitask, work under pressure / deadlines, in a positive and professional manner. Back up time entry including prevailing wage rates and intent and affidavits Greet and provide service to customers by phone; answer, route, and manage incoming phone calls/questions in a professional and courteous manner. Provide administrative support including preparing and sending documents, this could include reports, data entry, presentations and other admin tasks. Perform accurate and fast data entry to record payroll hours / billable hours, product & service orders, sales, work orders, purchases, subcontractor / vendor / customer invoices. Manage and balance petty cash and billable vs. payroll hours (work in progress reports). Generate, print, analyze, and resolve issues from reports about sales, purchases, expenses, customer accounts, invoiced but not billed, inventory, etc. Manage and order parts, office supplies, restock other office and inventory items. Review and manage subcontracts and customer purchase orders in order to set up new jobs. Other duties as assigned. Other Functions: Tasks that may or may not be performed by the person in this job. Receive incoming / prepare outgoing shipments; route to appropriate department / ship via appropriate carrier. Filing or other duties may be assigned. Education and/or Experience: High School diploma or general education degree (GED); or 1-year related experience and/or training; or equivalent combination of education and experience; previous experience in dispatching, office management, bookkeeping, collections, or billing is preferred. Ideal candidates will have experience with NetSuite & Ultipro software.

Summary: Under general supervision of the service manager to perform system design, troubleshooting, programming, and installations. Optimizes, maintains, and repairs 2-way and wireless communications systems including complex radio systems and 911 communications centers for customers. Essential Functions: Tasks that must be performed by the person in this job. Reasonable accommodation(s) may be requested to enable individuals to perform the essential functions. Diagnose, troubleshoot, discuss, and resolve wireless communication equipment questions and problems with customers in a positive and efficient manner in person on customer's site, by phone, e-mail, and at Day Wireless Systems' shop location. Perform required diagnostic and analytical tests to diagnose and repair wireless communication equipment such as dispatch consoles, paging infrastructure, and trunked radio systems, and mobile installations. Analyze and comprehend diagnostic test results and use to repair and program radios and wireless equipment. Work with customer to determine deadlines, urgency, timeline, and schedule of completing repairs, maintenance, and programming with customers, vendors, and shop management to ensure resolution of problem meets customer's needs. Prepare quotes and bids. Acts as the shop's safety coordinator by collaborating with safety rep from DWS' headquarters for all aspects of safety training and implementation. Perform wireless communications system programming, per industry practices and vendor criteria. Performs the installation of radio and wireless mobile and base communications systems per industry practices and vendor criteria. Reports any accidents, maintenance needs, or repairs to management while using any company vehicle. Practices and follows safe driving procedures as described and required in safe driver training. Must be available to work Monday thru Friday, 8 a.m. to 5 p.m. To properly support our public safety and first responder customers, technicians will be required to be on call, which includes overtime with little or no notice. Must be able to travel, this may be local, daily travel or overnight travel. Qualifications Education and/or Experience: Three to five years' experience in 2-way radio and wireless communication systems theory. Able to use computer and program, troubleshoot, perform diagnostics, and repair complex communication systems. Associate degree or equivalent from a two-year college or vocational school in electronics and wireless system repair is preferred but not required. Experience in diagnostics, repair, maintenance, program wireless communication equipment such as 2-way radios, transmitters, receivers, antennas for customers. Experienced with dispatch consoles, paging infrastructure, and trunked radio systems. Knowledge of radio repair, mobile installations, DC, AC, and RF Theory as it applies to wireless communications. Licenses, Certifications: An industry license (FCC, FICA or NARTE). A valid driver license and insurability in the state of employment. CET or NABER certification.

Summary: Trouble shoot, repair, maintenance, program wireless communication equipment such as 2-way radios, transmitters, receivers, antennas for customers. The technician will develop skills working with but not limited to the following: Installing and Servicing Fire Alarm systems, installing and Servicing Burglar Alarm systems, Installing and Servicing Hardwired and Wireless systems, Installing and Servicing CCTV systems, Installing and Servicing Access Control systems Installing and Servicing Intercom systems Supervisory Responsibilities: N/A Essential Functions: Tasks that must be performed by the person in this job. Reasonable accommodation(s) may be requested to enable individuals to perform the essential functions. Other duties as assigned. Diagnose, troubleshoot, discuss, and resolve wireless communication equipment questions and problems with customers in a positive and efficient manner in person on customer's site, by phone, e-mail, and at Day Wireless Systems' shop location. Perform required diagnostic and analytical tests to diagnose and repair wireless communication equipment. Analyze and comprehend diagnostic test results and use to repair and program radios and wireless equipment. Work with customer to determine deadlines, urgency, timeline, and schedule of completing repairs, maintenance, and programming with customers, vendors, and shop management to ensure resolution of problem meets customer's needs. Perform wireless communications system programming, per industry practices and vendor criteria. Performs the installation of radio and wireless mobile and base communications systems per industry practices and vendor criteria. Reports any accidents, maintenance needs, or repairs to management while using any company vehicle. Practices and follows safe driving procedures as described and required in safe driver training. Must have California Driver's license and be insurable per an acceptable driving record. Must be able to travel, this may be local, daily travel or overnight travel. Must be able to work during the days / hours of Mon thru Fri, 8 a.m. to 5 p.m. and must be available for occasional mandatory over time, with little to no advance notice. Non-Essential Functions: Tasks that may or may not be performed by the person in this job. Maintains cleanliness and maintenance of any company vehicle. Fill out and complete time sheets, job tickets, data entry. Retrieving parts from warehouse for repairs and maintenance. Lifting boxes, tools, computers, service monitors, and other shop equipment. Qualifications Education and/or Experience: Associate's (A A) degree or equivalent from two-year college or vocational school in electronics and wireless system repair is preferred but not required. Minimum 6 months to a year of related work experience in electronic communications repair is required; or the equivalent combination of education and experience. Acceptable previous experience in diagnostics, repair, maintenance, program wireless communication equipment such as 2-way radios, transmitters, receivers, antennas for customers. Knowledge of radio repair, mobile installations, DC, AC, and RF Theory as it applies to wireless communications. Licenses, Certifications: Valid driver license and must be insurable to drive. Tools, Equipment, Machines (non office): Ability to operate test equipment to perform diagnostics on wireless equipment. Basic hand tools such as cordless power drills, screw drivers, wrenches, etc. are typically used in the performance of this job.

As a Radio and System Journeyman Technician in our Strategic Business division, based in Europe, preferably the Netherlands, you will play a pivotal role in ensuring the smooth operation and maintenance of radio and communication systems within our organization's strategic business division. You will be responsible for installing, configuring, troubleshooting, and repairing various radio and system equipment. Additionally, you will have the opportunity to travel for projects, supporting our global operations and contributing to the success of our strategic initiatives. Essential Functions: Tasks that must be performed by the person in this job. Reasonable accommodation(s) may be requested to enable individuals to perform the essential functions. Installation and Configuration: Install and configure radio and communication systems, including hardware, software, and associated equipment, ensuring proper functionality and integration with existing systems. System Maintenance: Perform routine maintenance tasks, including inspections, diagnostics, repairs, and upgrades to radio and system equipment to ensure optimal performance and reliability. Troubleshooting and Issue Resolution: Identify and resolve technical issues and faults in radio and communication systems, employing diagnostic tools and techniques to minimize downtime and restore services promptly. System Upgrades and Expansion: Collaborate with the strategic business division and other relevant stakeholders to assess system requirements, recommend upgrades, and participate in the planning and implementation of system expansions or improvements. Project Travel: Willingness and ability to travel to various locations within Europe and potentially internationally for project deployments, installations, and support. Documentation and Reporting: Maintain accurate records of system configurations, maintenance activities, and troubleshooting procedures. Prepare reports on system performance, incidents, and recommended solutions. Compliance and Safety: Adhere to industry standards, regulations, and safety protocols while working with radio and communication systems. Ensure compliance with applicable legal and regulatory requirements. Training and Support: Provide training and guidance to end-users on operating radio and communication systems effectively. Offer technical support and assistance, addressing user queries and concerns promptly. Collaboration: Collaborate with cross-functional teams, including IT personnel, engineers, and project managers, to coordinate system installations, upgrades, and maintenance activities. Must be able to travel, this may be local, daily travel or overnight travel. Other Essential Functions: Tasks that may or may not be performed by the person in this job. Maintains cleanliness and maintenance of any company vehicle. Fill out and complete time sheets, job tickets, data entry. Retrieving parts from warehouse for repairs and maintenance. Lifting boxes, tools, computers, service monitors, and other shop equipment. Education and/or Experience: Three to five years' experience in 2-way radio and wireless communication systems theory. Able to use computer and program, troubleshoot, perform diagnostics, and repair complex communication systems. High school diploma or equivalent. Additional technical certifications or vocational training in radio systems, electronics, or related fields is preferred. Proven experience as a radio technician, system technician, or a similar role, demonstrating hands-on experience with radio and communication systems. Technical Skills: Proficiency in installing, configuring, and maintaining radio systems, including knowledge of various hardware and software components. Familiarity with communication protocols, network infrastructure, and diagnostic tools. Analytical Thinking: Strong problem-solving skills with the ability to analyze and troubleshoot technical issues effectively. Attention to detail and the ability to work under pressure to meet deadlines. Communication: Excellent verbal and written communication skills to convey technical information clearly and concisely. Ability to interact professionally with diverse stakeholders. Adaptability: Flexibility to adapt to evolving technologies and changing work environments. Willingness to learn and stay updated with the latest advancements in radio and communication systems. Team Player: Demonstrated ability to work collaboratively in a team-oriented environment. Willingness to share knowledge, assist colleagues, and contribute to collective goals. Safety Consciousness: Strong commitment to following safety guidelines and protocols to ensure a secure working environment. Valid Driver's License: Possession of a valid driver's license for travel to different project locations as required. Licenses, Certifications: An industry license (FCC, FICA or NARTE). A valid driver license and insurability in the state of employment. CET or NABER certification.

may sit in either Utrecht, Netherlands OR Dublin, Ireland. Summary: Manages day-to-day activities for specific service customers. This position will be responsible for being one of the points of contacts between large, identified client(s). Works with Area Services Managers on business development, budget planning and analyzing profits & loss statements. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Oversees installation and service projects and work with the Service Manager at shops to arrange. • Oversees the scheduling of customer installation projects working with the customer's team when needed. • Oversee the scheduling of on-site service calls and requests for support from client(s). • Responsible for keeping communications flowing between the leadership, Service, Engineering, Project Management and Sales, clients, and all other employees that need-to-know status information. • Oversees administrative functions performed at responding Service Center(s), including billing, accounts receivable, and time tickets for completed customer work. • Coordinates with Shop Service Manager(s) for scheduling of support resources when needed, as well as coordinating with Project Management for project support and Sales/DAS Sales for Strategic Sales staff as needed. • Coordinates with Area Service Manager(s) for scheduling of support resources as needed. • Coordinates with Project Management for project support as needed. • Responsible and communicative in addressing open tasks in a timely manner. • Collaborates with sales staff to develop new or ongoing business. • Accompanies sales staff, project managers and engineering on customer calls as needed. • Assists in designing systems to meet customer needs or when preparing project bids. • Collaborates with Engineering and Strategic Business to review and validate all designs done internally or Designed By Others (DBOs). • Responsible for verifying/identifying customer, AHJ, and/or carrier test requirements • Review, validate Service Project Scope for domestic and international projects and provide Service Labor Cost estimates. • Develop a vetting system to validate subcontractors and their support capabilities. This would include reviewing scopes, quotes and bid for pricing. • Collaborate with Service Technicians, Service Managers, Engineers, Project Managers and Post-Sale Technical Writer (PSTW) to develop technical documentation to include, but not limited to, Acceptance Test Plans (ATPs), Programming Guides, Commissioning Documents, Red-Line/As-Built's and Closeout Documentation (CoP). • Responsible for Client Specific QA Program; Development, Adoption and Adherence • Review and provide inputs on Pre-Sale Project Proposals • Verify Technical Qualifications of assigned Service Personnel and Subcontractors • Forecast, plan, schedules and secure training and certification courses for assigned service technical resources • Create Cell Data Test "UE Scripts"/"Scanner Templates" for Post-Processing activities including Post Processes Cell Data (Scanner and UE ); provided to Engineering for review/validation • Reviews, Analyzes and Validates RoIP, ERCES/ERRCS and Cellular Coverage Test Data for compliance • Provides or secures reachback support for the Service Technicians to resolve technical issues. • Responsible for System Staging coordination, scheduling and QA checklist completion • Responsible for shipping, tracking and receipt of equipment at the project location • Performs QA Reviews of Project Closeout Deliverables and Artifacts from Service, Engineering, Subcontractors, and Strategic Business. • Coordinates Project CoP activities with Project Management Team and PSTW • Collaborates with all internal departments that work on a project, to assist in developing technical documentation checklists from start to finish. • Responsible for having a launch meeting with all the parties to determine the timeline and whom will be responsible for what tasks. • Must be available for technician support, internal or external, to assist virtual on a process. • Work closely with the closeout team once a project if finalized with a closeout checklist. Communicate back to the customer for satisfaction and the notification of completion. • Performs customer service work as required. • Performs computer service activities and obtains outside service as needed. • Develops service maintenance opportunities with new and existing customers. • Coordinates with and supports the Strategic Sales staff as needed. • Other duties may apply Supervisory Responsibilities Supervises administrative support, installations, and technical operations for Day Wireless resources and Subcontractors. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws including providing of daily work direction, approving absences or overtime, and recommending or approving personnel actions. Qualifications Education and/or Experience Associate degree (A.A.) or equivalent from two-year college or vocational school in electronics & wireless system repair; plus minimum four years related work experience in electronic communications repair; or equivalent combination of education and experience. • Federal Communications Commission (FCC) Commercial License (General Radiotelephone Operator License/GROL) • ETA-Certified Service Manager (CSM) is preferred • Original Equipment Manufacturer (OEM) Certifications (Test Equipment, Data Platforms, Motorola, BDA/DAS) is ideal • Driver's License required • Passport valid for travel outside the United States required

Summary: The purpose of this position is to assist in the development of technicians and ensure that major projects in the area have the technical resources to successfully be deployed. The person in this role will also have a position in a service shop and assist that shop with their day-to-day technical needs. Essential Duties and Responsibilities include the following. Other duties may be assigned. Work with shop managers and technicians on conducting, facilitating and executing training plans, creating plans that are collective but also to fit each Technician's level. These plans can and should include formalized classroom training as well as on the job (OJT) practical training. The goal of training is to assist our technical team to progress from Apprentice-Journeyman-Senior-System technician. The STT should consider compliance, industry specific regulations and company specific policies and procedures while creating and maintaining employee training records. Develop ongoing training standards and minimums to progress from each technical level. Review technician knowledge to ensure the standards are met for advancement. Provide feedback to the technician supervisor on the technician's status with meeting the standards. Assist with scheduling and conduct OJT training. Conduct senior technician meetings to discuss technical topics. Assist service managers/lead technicians in reviewing major projects in presale and post-sale. Project scope Technicians assigned and their readiness to implement the project Local technician OJT Project tasks checklist Quality control Attend weekly shop manager Teams meeting Ability to travel within their assigned territory, plus other locations for training, meetings and educational purposes. Qualifications Education and/or Experience: Bachelor's degree (B. A.) from four-year college or university in RF electronic technologies plus more than 8 years related experience and/or training in maintaining and troubleshooting complex communications systems; or equivalent combination of education and experience. Strong communication and the ability to train to a variety of different individuals. Three to five years' experience in 2-way radio and wireless communication systems theory. Able to use computer and program, troubleshoot, perform diagnostics, and repair complex communication systems. Experience in diagnostics, repair, maintenance, program wireless communication equipment such as 2-way radios, transmitters, receivers, antennas for customers. Experienced with dispatch consoles, paging infrastructure, and trunked radio systems. Knowledge of radio repair, mobile installations, DC, AC, and RF Theory as it applies to wireless communications. Certificates, Licenses, Registrations A variety of certifications and licenses will be required, and on-going learning will be important for this role. Some of the certifications that are valuable are: FCC GROL CET/CETsr/CETma ETA Motorola ASTRO Valid Driver's License

Stone Security, a BearCom company is a leading company in security integration, dedicated to providing top-notch services/products to our clients. We pride ourselves on our commitment to excellence, innovation, and customer satisfaction. We are currently seeking a highly organized and detail-oriented Project Technician to join our growing team. Duties & Responsibilities: Install, program, system start-up/check-out, certify, and customer training on assigned projects. Runs wiring, installs hardware, and field terminate all devices. Inspects and tests systems, batteries, and wiring; adjusts and repairs as required. Replaces malfunctioning hardware when necessary. Ensures installations comply with Stone Security Standards. Familiar with basic blueprints, schematics, manuals, and other specifications to determine installation procedures unassisted, may require assistance with more complex specifications. Performs other related duties as required. Travel is required. As a Project Specialist, you are a part of a dynamic team that allows you to grow as Stone grows. Qualifications/Skills: CLASS A Limited Energy Technician license is required AN EL06 is highly desired, but not required Three years of experience installing network camera systems (Milestone, Axis, Hanwha and Bosch) Three years of experience installing security systems (DMP and Bosch) Three years of experience installing access control systems (Lenel and S2). Excellent analytical and problem-solving skills. Excellent communication skills. Proven track record of leading a security installation team. Aptitude for networking, computers and general IT is preferred. Education/Experience: High school diploma or equivalent required. 3 years of related work experience required On-the-job training may be provided. Physical Requirements: Ability to use hand and power tools to install hardware. Prolonged periods standing, kneeling, bending, and climbing ladders. Physically able to install system hardware and wiring. Must be able to lift 35 lbs. at a time. Benefits: Stone wants to elevate your professional growth! We value investing in developing our team members and advancing your technical capabilities. Stone can provide extensive on-the-job training and covers all fees associated with most professional certifications. You'll also receive: Highly Competitive Compensation Medical, Dental, and Vision Insurance Company-Paid Life and Short-Term Disability Paid Holidays Generous Paid Time Off Matching 401k Plan Employee Referral Bonus Tuition Reimbursement Stone, a BearCom Company, is proud to be an equal-opportunity workplace free from discrimination and harassment. We seek to recruit and retain the most talented people from a diverse candidate pool and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other disability protected by law. All employment is decided based upon qualifications, merit and business need.

Seeking an installer that can install equipment into law enforcement, public works and construction vehicles - A background in car audio, mobile radios, automotive lighting, automotive electronics or automotive work is desired. The installation tech will assist with the installation of lights, sirens, cages, bumpers, K9 units, gun racks, in car video systems, radars, computer docking stations and modems as well as other wireless communications systems in vehicles at our local upfitting shop in Salem. This is typically an M-F 8 to 5 job. Some Overtime and travel may be required but minimal. Successful candidates will be motivated to learn new products, have good attendance and a desire for a full-time career with a great company. This person will need to be able to work independently and in a team environment. Applicants should have experience with the following: * Automotive electronics * Mobile radios * Computers * Part assembly * 12-Volts * 110-Volts * Marine electronics * Bluetooth * Power tools * Aftermarket automotive lighting * Automotive assembly CB radios The technician will need to exhibit similar skills useful in the installation of vehicle stereo components, alarm systems and hands free automotive cellular components. Plus, if you have experience doing the following (transferable skills): Installation of vehicle lighting, controls, sirens, cameras, electronic locks, and other similar technologies in vehicles. Dismantling the interior and exterior of vehicles. This includes seats, carpeting, flooring, dash and interior panels, headliners, and lights to prepare vehicle for installation of new systems. Install radio communications systems, antennas and GPS equipment into vehicles. or mobile command centers. Vehicle repairs or replacing bumpers, lights and other automotive parts. Custom fabrication using metal, wood and other various materials. Comfortable using power tools, hand tools, electrical equipment. Day Wireless Systems (DWS) and Reliance Connects is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: DWS is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at DWS are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. DWS will not tolerate discrimination or harassment based on any of these characteristics. DWS encourages applicants of all ages. Qualifications Experience Preferred 1 year: Upfitting or car stereo installation. Installation of radios or other equipment in vehicles. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Essential Functions/Major Responsibilities: Perform installations of fixed & wireless communications equipment by assembling and bolting equipment into vehicles by using guidelines. Limited supervision by the of Lead or Service manager. Be able to do a complete mobile installation, communication equipment install as well as being able to remove vehicle interior and wiring (or rewiring) a complete electrical system. Install electrical wiring harnesses, connect electrical fittings, drill holes, soldering and perform all physical tasks associated with upfitting vehicles. Develop efficient wiring routes throughout the vehicle and enable future replacement and/or troubleshooting Remove and disassemble OEM vehicle interiors when necessary. Perform quality control tasks in preparing the vehicles for departure as well as to ensure all parts are fitted and screwed in properly. Troubleshoot and diagnose problems with equipment as necessary. Maintain safe, clean and orderly tools and work area. Continuous learning in new products, skills techniques from colleagues and manufacturers Installations may be at the shop location or at a customer's site. Inventory/assemble parts and stage the installation prior to install to ensure correct parts available. Complete job tickets and time sheets to record installation work. Maintain positive customer relations and communication additional information when needed. Must be able to travel, this may be local, daily travel or overnight travel. Other duties as assigned. Experience and Education: High School diploma is required, any additional education or trade school training of electrical, wiring, automotive is preferred. Experience working in an auto body shop Experience installing car stereo and electronic equipment highly preferred Experience removing the interior trim of vehicles Basic understanding of electrical theory and low-voltage electronics Completes job tickets, sales orders, and other required work documents. Willingness to train other Mobile Installation Technicians Knowledge of hand and power tools is required Possess the drive and mental aptitude to work safely with tools and understand auto-wiring. Self-motivated, professional, listen and follow directions of Service Manager Work well under pressure in a fast-paced environment. Be able to follow directions; evaluate problems and prioritize tasks. Ability to work well in small teams Licenses, Certifications: Valid Driver's License **Clean Driving Record is required ** (Major infractions are a disqualifier. ex: DUI, any drug motor vehicle offence, hit & run, reckless driving infractions, driving while suspended, passing a stopped school bus, involvement in a fatal accident, or 3 or more minor infractions within 3 year period) Current Basic MECP Certified or prior certification Qualifications Summary: Install a variety of different equipment, wiring, and electrical systems into vehicles. Qualified candidates must be capable and comfortable removing OEM vehicle interior trim with complete wiring and electrical system. Experience with soldering, wire routing, wire protection, fusing, multi-voltage charging systems, relays/Switching/Integration is a plus. Experience with 12-volt installations experience, preferably with GPS, alarms, low-voltage mobile electronics, or stereos is preferred. Experience installing mobile electronic equipment into vehicles is highly preferred.

Summary: Trouble shoot, repair, maintenance, program wireless communication equipment such as 2-way radios, transmitters, receivers, antennas for customers. Essential Functions: Tasks that must be performed by the person in this job. Reasonable accommodation(s) may be requested to enable individuals to perform the essential functions. Other duties as assigned. Diagnose, troubleshoot, discuss, and resolve wireless communication equipment questions and problems with customers in a positive and efficient manner in person on customer's site, by phone, e-mail, and at Day Wireless Systems' shop location. Perform required diagnostic and analytical tests to diagnose and repair wireless communication equipment. Analyze and comprehend diagnostic test results and use to repair and program radios and wireless equipment. Work with customer to determine deadlines, urgency, timeline, and schedule of completing repairs, maintenance, and programming with customers, vendors, and shop management to ensure resolution of problem meets customer's needs. Perform wireless communications system programming, per industry practices and vendor criteria. Performs the installation of radio and wireless mobile and base communications systems per industry practices and vendor criteria. Reports any accidents, maintenance needs, or repairs to management while using any company vehicle. Practices and follows safe driving procedures as described and required in safe driver training. Must have California Driver's license and be insurable per an acceptable driving record. Must be able to work during the days / hours of Mon thru Fri, 8 a.m. to 5 p.m. and must be available for occasional mandatory over time, with little to no advance notice. Must be able to travel, this may be local, daily travel or overnight travel. Qualifications Education and/or Experience: Associate's (A A) degree or equivalent from two-year college or vocational school in electronics and wireless system repair is preferred but not required. Minimum 6 months to a year of related work experience in electronic communications repair is required; or the equivalent combination of education and experience. Acceptable previous experience in diagnostics, repair, maintenance, program wireless communication equipment such as 2-way radios, transmitters, receivers, antennas for customers. Knowledge of radio repair, mobile installations, DC, AC, and RF Theory as it applies to wireless communications. Licenses, Certifications: Valid driver license and must be insurable to drive.

As a Radio and System Journeyman Technician in our Strategic Business division, based in Europe, preferably the Netherlands, you will play a pivotal role in ensuring the smooth operation and maintenance of radio and communication systems within our organization's strategic business division. You will be responsible for installing, configuring, troubleshooting, and repairing various radio and system equipment. Additionally, you will have the opportunity to travel for projects, supporting our global operations and contributing to the success of our strategic initiatives. Essential Functions: Tasks that must be performed by the person in this job. Reasonable accommodation(s) may be requested to enable individuals to perform the essential functions. Installation and Configuration: Install and configure radio and communication systems, including hardware, software, and associated equipment, ensuring proper functionality and integration with existing systems. System Maintenance: Perform routine maintenance tasks, including inspections, diagnostics, repairs, and upgrades to radio and system equipment to ensure optimal performance and reliability. Troubleshooting and Issue Resolution: Identify and resolve technical issues and faults in radio and communication systems, employing diagnostic tools and techniques to minimize downtime and restore services promptly. System Upgrades and Expansion: Collaborate with the strategic business division and other relevant stakeholders to assess system requirements, recommend upgrades, and participate in the planning and implementation of system expansions or improvements. Project Travel: Willingness and ability to travel to various locations within Europe and potentially internationally for project deployments, installations, and support. Documentation and Reporting: Maintain accurate records of system configurations, maintenance activities, and troubleshooting procedures. Prepare reports on system performance, incidents, and recommended solutions. Compliance and Safety: Adhere to industry standards, regulations, and safety protocols while working with radio and communication systems. Ensure compliance with applicable legal and regulatory requirements. Training and Support: Provide training and guidance to end-users on operating radio and communication systems effectively. Offer technical support and assistance, addressing user queries and concerns promptly. Collaboration: Collaborate with cross-functional teams, including IT personnel, engineers, and project managers, to coordinate system installations, upgrades, and maintenance activities. Must be able to travel, this may be local, daily travel or overnight travel. Other Essential Functions: Tasks that may or may not be performed by the person in this job. Maintains cleanliness and maintenance of any company vehicle. Fill out and complete time sheets, job tickets, data entry. Retrieving parts from warehouse for repairs and maintenance. Lifting boxes, tools, computers, service monitors, and other shop equipment. Education and/or Experience: Three to five years' experience in 2-way radio and wireless communication systems theory. Able to use computer and program, troubleshoot, perform diagnostics, and repair complex communication systems. High school diploma or equivalent. Additional technical certifications or vocational training in radio systems, electronics, or related fields is preferred. Proven experience as a radio technician, system technician, or a similar role, demonstrating hands-on experience with radio and communication systems. Technical Skills: Proficiency in installing, configuring, and maintaining radio systems, including knowledge of various hardware and software components. Familiarity with communication protocols, network infrastructure, and diagnostic tools. Analytical Thinking: Strong problem-solving skills with the ability to analyze and troubleshoot technical issues effectively. Attention to detail and the ability to work under pressure to meet deadlines. Communication: Excellent verbal and written communication skills to convey technical information clearly and concisely. Ability to interact professionally with diverse stakeholders. Adaptability: Flexibility to adapt to evolving technologies and changing work environments. Willingness to learn and stay updated with the latest advancements in radio and communication systems. Team Player: Demonstrated ability to work collaboratively in a team-oriented environment. Willingness to share knowledge, assist colleagues, and contribute to collective goals. Safety Consciousness: Strong commitment to following safety guidelines and protocols to ensure a secure working environment. Valid Driver's License: Possession of a valid driver's license for travel to different project locations as required. Licenses, Certifications: An industry license (FCC, FICA or NARTE). A valid driver license and insurability in the state of employment. CET or NABER certification.

Summary: The purpose of this position is to assist in the development of technicians and ensure that major projects in the area have the technical resources to successfully be deployed. The person in this role will also have a position in a service shop and assist that shop with their day-to-day technical needs. Essential Duties and Responsibilities include the following. Other duties may be assigned. Work with shop managers and technicians on conducting, facilitating and executing training plans, creating plans that are collective but also to fit each Technician's level. These plans can and should include formalized classroom training as well as on the job (OJT) practical training. The goal of training is to assist our technical team to progress from Apprentice-Journeyman-Senior-System technician. The STT should consider compliance, industry specific regulations and company specific policies and procedures while creating and maintaining employee training records. Develop ongoing training standards and minimums to progress from each technical level. Review technician knowledge to ensure the standards are met for advancement. Provide feedback to the technician supervisor on the technician's status with meeting the standards. Assist with scheduling and conduct OJT training. Conduct senior technician meetings to discuss technical topics. Assist service managers/lead technicians in reviewing major projects in presale and post-sale. Project scope Technicians assigned and their readiness to implement the project Local technician OJT Project tasks checklist Quality control Attend weekly shop manager Teams meeting Ability to travel within their assigned territory, plus other locations for training, meetings and educational purposes. Qualifications Education and/or Experience: Bachelor's degree (B. A.) from four-year college or university in RF electronic technologies plus more than 8 years related experience and/or training in maintaining and troubleshooting complex communications systems; or equivalent combination of education and experience. Strong communication and the ability to train to a variety of different individuals. Three to five years' experience in 2-way radio and wireless communication systems theory. Able to use computer and program, troubleshoot, perform diagnostics, and repair complex communication systems. Experience in diagnostics, repair, maintenance, program wireless communication equipment such as 2-way radios, transmitters, receivers, antennas for customers. Experienced with dispatch consoles, paging infrastructure, and trunked radio systems. Knowledge of radio repair, mobile installations, DC, AC, and RF Theory as it applies to wireless communications. Certificates, Licenses, Registrations A variety of certifications and licenses will be required, and on-going learning will be important for this role. Some of the certifications that are valuable are: FCC GROL CET/CETsr/CETma ETA Motorola ASTRO Valid Driver's License

Summary: Trouble shoot, repair, maintenance, program wireless communication equipment such as 2-way radios, transmitters, receivers, antennas for customers. The technician will develop skills working with but not limited to the following: Installing and Servicing Fire Alarm systems, installing and Servicing Burglar Alarm systems, Installing and Servicing Hardwired and Wireless systems, Installing and Servicing CCTV systems, Installing and Servicing Access Control systems Installing and Servicing Intercom systems Supervisory Responsibilities: N/A Essential Functions: Tasks that must be performed by the person in this job. Reasonable accommodation(s) may be requested to enable individuals to perform the essential functions. Other duties as assigned. Diagnose, troubleshoot, discuss, and resolve wireless communication equipment questions and problems with customers in a positive and efficient manner in person on customer's site, by phone, e-mail, and at Day Wireless Systems' shop location. Perform required diagnostic and analytical tests to diagnose and repair wireless communication equipment. Analyze and comprehend diagnostic test results and use to repair and program radios and wireless equipment. Work with customer to determine deadlines, urgency, timeline, and schedule of completing repairs, maintenance, and programming with customers, vendors, and shop management to ensure resolution of problem meets customer's needs. Perform wireless communications system programming, per industry practices and vendor criteria. Performs the installation of radio and wireless mobile and base communications systems per industry practices and vendor criteria. Reports any accidents, maintenance needs, or repairs to management while using any company vehicle. Practices and follows safe driving procedures as described and required in safe driver training. Must have California Driver's license and be insurable per an acceptable driving record. Must be able to travel, this may be local, daily travel or overnight travel. Must be able to work during the days / hours of Mon thru Fri, 8 a.m. to 5 p.m. and must be available for occasional mandatory over time, with little to no advance notice. Non-Essential Functions: Tasks that may or may not be performed by the person in this job. Maintains cleanliness and maintenance of any company vehicle. Fill out and complete time sheets, job tickets, data entry. Retrieving parts from warehouse for repairs and maintenance. Lifting boxes, tools, computers, service monitors, and other shop equipment. Qualifications Education and/or Experience: Associate's (A A) degree or equivalent from two-year college or vocational school in electronics and wireless system repair is preferred but not required. Minimum 6 months to a year of related work experience in electronic communications repair is required; or the equivalent combination of education and experience. Acceptable previous experience in diagnostics, repair, maintenance, program wireless communication equipment such as 2-way radios, transmitters, receivers, antennas for customers. Knowledge of radio repair, mobile installations, DC, AC, and RF Theory as it applies to wireless communications. Licenses, Certifications: Valid driver license and must be insurable to drive. Tools, Equipment, Machines (non office): Ability to operate test equipment to perform diagnostics on wireless equipment. Basic hand tools such as cordless power drills, screw drivers, wrenches, etc. are typically used in the performance of this job.

Essential Functions: Tasks that must be performed by the person in this job. Reasonable accommodation(s) may be requested to enable individuals to perform the essential functions. Diagnose, troubleshoot, discuss, and resolve wireless communication equipment questions and problems with customers in a positive and efficient manner in person on customer's site, by phone, e-mail, and at Day Wireless Systems' shop location. Perform required diagnostic and analytical tests to diagnose and repair wireless communication equipment such as dispatch consoles, paging infrastructure, and trunked radio systems, and mobile installations. Analyze and comprehend diagnostic test results and use to repair and program radios and wireless equipment. Work with customer to determine deadlines, urgency, timeline, and schedule of completing repairs, maintenance, and programming with customers, vendors, and shop management to ensure resolution of problem meets customer's needs. Prepare quotes and bids. Acts as the shop's safety coordinator by collaborating with safety rep from DWS' headquarters for all aspects of safety training and implementation. Perform wireless communications system programming, per industry practices and vendor criteria. Performs the installation of radio and wireless mobile and base communications systems per industry practices and vendor criteria. Reports any accidents, maintenance needs, or repairs to management while using any company vehicle. Practices and follows safe driving procedures as described and required in safe driver training. Must be available to work Monday thru Friday, 8 a.m. to 5 p.m. To properly support our public safety and first responder customers, technicians will be required to be on call, which includes overtime with little or no notice. Must be able to travel, this may be local, daily travel or overnight travel. Education and/or Experience: Three to five years' experience in 2-way radio and wireless communication systems theory. Able to use computer and program, troubleshoot, perform diagnostics, and repair complex communication systems. Associate degree or equivalent from a two-year college or vocational school in electronics and wireless system repair is preferred but not required. Experience in diagnostics, repair, maintenance, program wireless communication equipment such as 2-way radios, transmitters, receivers, antennas for customers. Experienced with dispatch consoles, paging infrastructure, and trunked radio systems. Knowledge of radio repair, mobile installations, DC, AC, and RF Theory as it applies to wireless communications. Licenses, Certifications: An industry license (FCC, FICA or NARTE). A valid driver license and insurability in the state of employment. CET or NABER certification. Qualifications Summary: Under general supervision of the service manager to perform system design, troubleshooting, programming, and installations. Optimizes, maintains, and repairs 2-way and wireless communications systems including complex radio systems and 911 communications centers for customers.

Install a variety of different equipment, wiring, and electrical systems into vehicles. Qualified candidates must be capable and comfortable removing OEM vehicle interior trim with complete wiring and electrical system. Experience with soldering, wire routing, wire protection, fusing, multi-voltage charging systems, relays/Switching/Integration is a plus. Experience with 12-volt installations experience, preferably with GPS, alarms, low-voltage mobile electronics, or stereos is preferred. Experience installing mobile electronic equipment into vehicles is highly preferred. Essential Functions/Major Responsibilities: Perform installations of fixed & wireless communications equipment by assembling and bolting equipment into vehicles by using guidelines. Limited supervision by the of Lead or Service manager. Be able to do a complete mobile installation, communication equipment install as well as being able to remove vehicle interior and wiring (or rewiring) a complete electrical system. Install electrical wiring harnesses, connect electrical fittings, drill holes, soldering and perform all physical tasks associated with upfitting vehicles. Develop efficient wiring routes throughout the vehicle and enable future replacement and/or troubleshooting Remove and disassemble OEM vehicle interiors when necessary. Perform quality control tasks in preparing the vehicles for departure as well as to ensure all parts are fitted and screwed in properly. Troubleshoot and diagnose problems with equipment as necessary. Maintain safe, clean and orderly tools and work area. Continuous learning in new products, skills techniques from colleagues and manufacturers Installations may be at the shop location or at a customer's site. Inventory/assemble parts and stage the installation prior to install to ensure correct parts available. Complete job tickets and time sheets to record installation work. Maintain positive customer relations and communication additional information when needed. Must be able to travel, this may be local, daily travel or overnight travel. Other duties as assigned. Qualifications Experience and Education: High School diploma is required, any additional education or trade school training of electrical, wiring, automotive is preferred. Experience working in an auto body shop Experience installing car stereo and electronic equipment highly preferred Experience removing the interior trim of vehicles Basic understanding of electrical theory and low-voltage electronics Completes job tickets, sales orders, and other required work documents. Willingness to train other Mobile Installation Technicians Knowledge of hand and power tools is required Possess the drive and mental aptitude to work safely with tools and understand auto-wiring. Self-motivated, professional, listen and follow directions of Service Manager Work well under pressure in a fast-paced environment. Be able to follow directions; evaluate problems and prioritize tasks. Ability to work well in small teams Licenses, Certifications: Valid Driver's License **Clean Driving Record is required ** (Major infractions are a disqualifier. ex: DUI, any drug motor vehicle offence, hit & run, reckless driving infractions, driving while suspended, passing a stopped school bus, involvement in a fatal accident, or 3 or more minor infractions within 3 year period) Current Basic MECP Certified or prior certification

Seeking an installer that can install equipment into law enforcement, public works and construction vehicles - A background in car audio, mobile radios, automotive lighting, automotive electronics or automotive work is desired. The installation tech will assist with the installation of lights, sirens, cages, bumpers, K9 units, gun racks, in car video systems, radars, computer docking stations and modems as well as other wireless communications systems in vehicles at our local upfitting shop in Salem. This is typically an M-F 8 to 5 job. Some Overtime and travel may be required but minimal. Successful candidates will be motivated to learn new products, have good attendance and a desire for a full-time career with a great company. This person will need to be able to work independently and in a team environment. Applicants should have experience with the following: * Automotive electronics * Mobile radios * Computers * Part assembly * 12-Volts * 110-Volts * Marine electronics * Bluetooth * Power tools * Aftermarket automotive lighting * Automotive assembly CB radios The technician will need to exhibit similar skills useful in the installation of vehicle stereo components, alarm systems and hands free automotive cellular components. Plus, if you have experience doing the following (transferable skills): Installation of vehicle lighting, controls, sirens, cameras, electronic locks, and other similar technologies in vehicles. Dismantling the interior and exterior of vehicles. This includes seats, carpeting, flooring, dash and interior panels, headliners, and lights to prepare vehicle for installation of new systems. Install radio communications systems, antennas and GPS equipment into vehicles. or mobile command centers. Vehicle repairs or replacing bumpers, lights and other automotive parts. Custom fabrication using metal, wood and other various materials. Comfortable using power tools, hand tools, electrical equipment. Day Wireless Systems (DWS) and Reliance Connects is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: DWS is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at DWS are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. DWS will not tolerate discrimination or harassment based on any of these characteristics. DWS encourages applicants of all ages. Qualifications Experience Preferred 1 year: Upfitting or car stereo installation. Installation of radios or other equipment in vehicles. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Essential Functions/Major Responsibilities: Perform installations of fixed & wireless communications equipment by assembling and bolting equipment into vehicles by using guidelines. Limited supervision by the of Lead or Service manager. Be able to do a complete mobile installation, communication equipment install as well as being able to remove vehicle interior and wiring (or rewiring) a complete electrical system. Install electrical wiring harnesses, connect electrical fittings, drill holes, soldering and perform all physical tasks associated with upfitting vehicles. Develop efficient wiring routes throughout the vehicle and enable future replacement and/or troubleshooting Remove and disassemble OEM vehicle interiors when necessary. Perform quality control tasks in preparing the vehicles for departure as well as to ensure all parts are fitted and screwed in properly. Troubleshoot and diagnose problems with equipment as necessary. Maintain safe, clean and orderly tools and work area. Continuous learning in new products, skills techniques from colleagues and manufacturers Installations may be at the shop location or at a customer's site. Inventory/assemble parts and stage the installation prior to install to ensure correct parts available. Complete job tickets and time sheets to record installation work. Maintain positive customer relations and communication additional information when needed. Must be able to travel, this may be local, daily travel or overnight travel. Other duties as assigned. Experience and Education: High School diploma is required, any additional education or trade school training of electrical, wiring, automotive is preferred. Experience working in an auto body shop Experience installing car stereo and electronic equipment highly preferred Experience removing the interior trim of vehicles Basic understanding of electrical theory and low-voltage electronics Completes job tickets, sales orders, and other required work documents. Willingness to train other Mobile Installation Technicians Knowledge of hand and power tools is required Possess the drive and mental aptitude to work safely with tools and understand auto-wiring. Self-motivated, professional, listen and follow directions of Service Manager Work well under pressure in a fast-paced environment. Be able to follow directions; evaluate problems and prioritize tasks. Ability to work well in small teams Licenses, Certifications: Valid Driver's License **Clean Driving Record is required ** (Major infractions are a disqualifier. ex: DUI, any drug motor vehicle offence, hit & run, reckless driving infractions, driving while suspended, passing a stopped school bus, involvement in a fatal accident, or 3 or more minor infractions within 3 year period) Current Basic MECP Certified or prior certification Qualifications Summary: Install a variety of different equipment, wiring, and electrical systems into vehicles. Qualified candidates must be capable and comfortable removing OEM vehicle interior trim with complete wiring and electrical system. Experience with soldering, wire routing, wire protection, fusing, multi-voltage charging systems, relays/Switching/Integration is a plus. Experience with 12-volt installations experience, preferably with GPS, alarms, low-voltage mobile electronics, or stereos is preferred. Experience installing mobile electronic equipment into vehicles is highly preferred.

is located in Redding, CA Summary: Performs system troubleshooting and system design for radio and wireless communications systems by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. Adjusts controls and tests systems using specified equipment and runs diagnostic checks. Troubleshoots customer concerns and resolve issues with their communications system in the field and in the shop. Installs, repairs and maintains equipment as indicated by results of testing and coordinate repairs with customers/vendors to ensure resolution of problem. Assists with quotes and bids to determine customer needs. Maintains operation of complex radio systems and 911 communications centers. Performs system programming following industry practices. Completes installation of radio and wireless mobile and base communications systems. Other Skills and Abilities: Requires thorough knowledge of wireless communications systems, electronic and RF principles, and NetSuite operations. Must have the ability to work in complex radio systems with minimal supervision. Must have the ability to troubleshoot problems with communications systems and use optimizations and basic system design skills. Ability to repair and maintain operation of complex radio systems and 911 communications centers. Thorough knowledge of infrastructure components including repeaters, mobiles, portables, and miscellaneous signaling equipment. Knowledge of industry-standard test equipment. Must be able to travel, this may be local, daily travel or overnight travel. Supervisory Responsibilities This job has no direct supervisory responsibilities. May train and supervisor other technician(s). Education and/or Experience: Five to seven years' experience in 2-way radio and wireless communication systems theory. Able to use computer and program, troubleshoot, perform diagnostics, and repair complex communication systems. Associate degree or equivalent from a two-year college or vocational school in electronics and wireless system repair is preferred but not required. Experience in diagnostics, repair, maintenance, program wireless communication equipment such as 2-way radios, transmitters, receivers, antennas for customers. Experienced with dispatch consoles, paging infrastructure, and trunked radio systems. Knowledge of radio repair, mobile installations, DC, AC, and RF Theory as it applies to wireless communications. Licenses, Certifications: An industry license (FCC, FICA or NARTE). A valid driver license and insurability in the state of employment. CET or NABER certification.