De-icer jobs near me - 10 jobs

Job Description CTL Engineering is hiring Technicians | Construction Inspection Services for ODOT ( transportation ) projects. CTL Engineering (*************** is an award winning, full service consulting engineering firm with (15) locations across OH, IN, WV, KY, NC, SC, and VA with a rich history over our (98) years in business. We provide civil/site design and land surveying, environmental, geotechnical, construction administration & inspection, accident reconstruction, roofing/building envelope, A/V system design, troubleshooting & installation, transportation design (bridge/roadway), and specialized testing services to the construction industry. We are looking for Technicians | Construction Inspection Services who will play a key role in all aspects of construction inspection services and quality control for state (ODOT), county, and local Clients. You'll be involved in the testing and inspection aspects of wide variety of construction projects including those primarily in the roadway/bridge arena (but could also include water/wastewater, aviation, commercial, and municipal utility/infrastructure sectors). We'll teach/you'll learn aspects of construction inspection and creative problem-solving skills while collaborating closely with institutions/municipal agencies. This position will use experience while learning new skills to assist clients through our cross-functional team dynamic and company culture. If you are passionate about staying ahead of industry trends, enjoy problem-solving, and have a n interest in construction inspection and quality control, we want to hear from you! This is more than a job posting … it's an invitation to bring your expertise to a company where innovation and passion converge seamlessly. Highlights: This position will include a mix of primarily field and laboratory work with some office work. This position works independently on broad projects under direction of a Dept. Manager while managing a team of direct reports or projects. Projects are typically in the Cleveland/northern OH region. Frequent travel within this region is expected. A stipend for personal vehicle use or a company take-home vehicle will be provided, based on the assignment. ODOT large project experience is a strong plus. Responsibilities: Perform construction engineering technician (inspection) services related to earthwork, concrete, asphalt and utility construction for ODOT, municipalities, and private sector clients. Perform engineering and construction field testing primarily roadway/bridge projects. Inspect and report on specific aspects of construction works in progress, such as concrete pours, rebar placement, pipe replacements as examples. Inspect and sample construction materials. Perform computations with formulas, plots data and draws simple curves and graphs. Assist Engineers in field during soil and materials investigations. Ensure that job site tests/observations, including quality control, quality assurance, and verifications are performed in accordance with the standard test/observation methods, project specifications and other contract documents. Perform lab testing and observation of soils, concrete and asphalt. Perform inspections for construction projects to ensure contractor compliance with state specifications, plans, and/or proposals for primarily roadway work, roadway, pavement. Verify plan quantities and calculations as bid plans. Prepare and maintain project records and reports. May assist with notifying the Contractor or the Project Engineer of non-conforming work. Knowledge, Skills and Abilities: Knowledge of engineering, construction, testing and inspection principles. Experience with materials and lab testing. Experience with standard testing and observation methods. Understanding of construction or engineering services. Experience in performing quality control initiatives and performance testing. Skill in lab reporting, writing reports and maintaining records Strong written and verbal communication skills. Ability to work in external environment conditions during difficult weather. Ability to provide status updates independently. Be quality-minded and client-focused. Minimum Qualifications: 0-2+ years experience in construction inspection and testing. new Trade School/Bachelor's grads are encouraged to apply - start a career! Familiarity with highway construction specifications and previous field experience is a plus/not required. Previous experience working for a testing company a plus. Experience with concrete, asphalt, earthwork, and utility construction engineering services and inspection/testing is nice to have but not required. Experience with field and laboratory testing of soil, concrete, asphalt, aggregate, masonry, structural steel and fireproofing, etc. is a plus but not required. Preferred certifications: ACI Grade I, DOT Asphalt Tech, NICET Level II Soils, ICC Special inspections and/or CWI/NDT inspectors - good to have but not required. Must have a valid driver license and an acceptable driving record. Benefits: CTL Engineering offers a competitive compensation and benefits package including medical, life, and disability insurance, paid time off, an award-winning ESOP ( Employee Stock Ownership Plan ), and a 401K plan. CTL Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

As a family company, we serve people and communities. When you work at Meijer, you're provided with career and community opportunities centered around leadership, personal growth and development. Consider joining our family - take care of your career and your community! Meijer Rewards * Weekly pay * Scheduling flexibility * Paid parental leave * Paid education assistance * Team member discount * Development programs for advancement and career growth Please review the job profile below and apply today! Responsible for delivering remarkable customer service by providing customers with exceptional product knowledge, efficient service and a friendly attitude; will be exposed to a variety of retail tasks related to product, customer service and merchandising. Join a community. Build a career. We are searching for a new member of the Meijer family! When you join us as a Food Clerk, you will provide customers with exceptional product knowledge, efficient service, and a friendly attitude. You will play a vital role in keeping our store running smoothly and having a positive impact on the community we serve. Sound good to you? Join us! What will you be doing? * Build rapport with customers. * Display a friendly and outgoing attitude through good eye contact and body language. * Respond to customer questions in an effective manner. * Stock product and maintain product displays according to merchandising standards. * Utilize technology to complete activities and tasks. * Follow safety and sanitation procedures to ensure quality service and products for our customers. * This position is applicable to the following departments: Meat, Seafood, Bakery, Deli, Grocery. What skills will you use? * You are detail-oriented and organized. * Strong listening and communications skills, face-to-face and virtually. * Willingness to learn or existing familiarity with job-specific technology. * Problem-solving competence and eagerness to troubleshoot when necessary. * Process-driven with ability to follow procedures in an organized and efficient way. * Ability to stay calm while working in a fast-paced environment. * Desire to work with customers on a consistent basis. * Ability to lift, carry, push, pull, bend, and twist while handling product. * Ability to stand for long periods of time. Meijer starts with me. It's not just a brand name, it's a family name. Founded by Hendrik and Gezina Meijer and their children in 1934, Meijer treats our Team Members like they're a part of our family. We want to see them happy, growing, and successful. That's why our Team Members say, "Meijer starts with me." Sound like the place for you? Join us. Who are we a good fit for? We love working with talented people but more than that, we look for team members who thrive in a collaborative environment and want to help us build on our family culture. Meijer is a great place for you if you want a job that's more than a paycheck and a career that plays an important role in your community.

Inspect all types of tools, gages, fixtures, templates, assemblies, sub-assemblies, component parts, etc. requiring layout to determine accuracy of geometric characteristics and/or functional performance as required. Perform mathematical calculations from interpretations of blueprints. Perform special setups on all kinds of inspection equipment. Set-up and operate all types of computer assisted measuring machines, including unique probe systems and various peripherals involving advanced trigonometric calculations, working from blueprints, detailed drawings, sketches, oral and written instructions, etc. Must be able to read and interpret complex aircraft engine blueprints/drawings and physically set up and accurately layout the dimensional characteristics and relationships described on the print utilizing conventional layout tools or coordinate measuring techniques. Adjust tools, gages, and fixtures working from procedures/instructions. Supply variable data on aircraft components or tools as required. Identify non-conforming characteristics per instructions/procedures on all types of tooling, gages, and engine hardware. Provide complete inspection service on all tools/parts requiring inspection including, but not limited to, customer interface at crib windows, and trucking back to the customer when required. Interface directly with all levels of engineering personnel. Maintain records and perform related duties. Required to work with minimum or no direct supervision. Maintain the immediate work environment to include cleaning equipment and general shop housekeeping. Definition for this occupation is for identity only; it does not detail all operations performed or required. MINIMUM EXPERIENCE: 1 Year One (1) year inspection experience equivalent to R19 Dimensional Inspection (including R19 Tool & Gage E0203). Or 3 years setting up and operating one or a combination of machine tools such as jig bores, horizontal boring mills, precision drills. Or the satisfactory completion of the Advanced Quality Techniques Training Program Experience on any jobs combined during the 1988 job classification combination or the 1994 Multi Skilling Agreement may be used in meeting the minimum experience criteria. THIS CLASSIFICATION INCORPORATED: R23 Inspector MMCA Varied E0220 R23 Inspector Tool & Gage E0204 R19 Inspector Diversified (partial) E0227 DISPLACEMENT: Incumbents of this job have displacement rights to following jobs: Inspector Development, E0202, R21 Heat Treat Services, E6603, R17 Multi Services. E0601, R16 Facilities Services, E0500, R13 Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

The Role We Want You For The ElectricalCommissioning Engineeris a senior level role focused on providing quality control and commissioning leadership for the mechanical, electrical, plumbing, fire protection design and construction for a Data Center project. This includes but is not limited to development and/or review of scope documents, construction document review, on-site construction supervision. Candidate shall be able to observe work in the field and compare to drawings to ensure details are installed per the drawings and specifications. THIS CAN BE A HYBRID ROLE/ UP to 75% REMOTE and 25% ON SITE- THIS POSITION OFFERS PAID TRAVEL FOR THE ON SITE TIME PERIOD Duties and Responsibilities: Collaborate with project teams, architects, engineers, and subcontractors to assist in developing MEP/FA/FP design concepts, specifications, and performance requirements. Review MEP/FA/FP design drawings, calculations, and technical documentation to verify compliance with project requirements, codes, and standards. Conduct comprehensive design reviews to identify potential issues, conflicts, and deficiencies, and provide recommendations for improvements. Monitor MEP/FA/FP installation activities to verify compliance with design intent, manufacturer guidelines, safety regulations, and industry best practices. Conduct site inspections to verify the quality of MEP/FA/FP installations, adherence to design specifications, and proper coordination with other trades. Develop project specific functional testing scripts based upon standard forms and documentation. Collaborate with commissioning agents to develop commissioning plans, procedures, and test scripts for MEP/FA/FP systems. Lead the MEP/FA/FP system commissioning activities, including functional testing, performance verification, and documentation of results. Coordinate with project teams to address any issues or deficiencies identified during the commissioning process, coordinating necessary corrective actions and retesting. Conduct final inspections and acceptance tests to verify that MEP/FA/FP systems meet project requirements and are ready for occupancy. Collaborate with project teams to develop accurate and comprehensive turnover documentation, including as-built drawings, operation and maintenance manuals, and warranties. Stay updated on industry advancements, emerging technologies, and best practices related to MEP/FA/FP systems and apply them to improve processes and outcomes. Provide technical guidance and mentorship to junior team members, promoting knowledge sharing and professional development. Requirements 5+ years experience in the construction field or building mechanical / electrical commissioning experience. Engineering design experience preferred. Bachelor Degree in Mechanical Engineering, Electrical Engineering, or a related field preferred. Commissioning Certification Proven experience in MEP/FA/FP system design, installation, and commissioning, preferably within the construction or engineering industry. Proficiency in reading and interpreting MEP/FA/FP design drawings, specifications, and technical documentation. Excellent technical and analytical skills, with the ability to identify issues, propose solutions, and make sound engineering judgments. Strong attention to detail, with a focus on quality and adherence to project deadlines. Effective communication and interpersonal skills, with the ability to collaborate with diverse stakeholders, including project teams, architects, engineers, and subcontractors. Familiarity with commissioning processes and procedures for MEP/FA/FP systems. Proficiency in using software applications for design, analysis, and documentation (e.g., AutoCAD, Revit, Navisworks). Ability to work independently and in a team, prioritizing tasks and managing multiple projects simultaneously. Proficient in Microsoft Office programs, working knowledge of iPad type instruments and various M/E industry “Apps”. Comfortable using common field-testing equipment such as infrared cameras, light meters, IAQ meters, etc. Know plumbing and fire protection field and Commissioning requirements through experience and supplemental training courses. Know electrical systems basics and have a good working knowledge of NEC for field reviews and Commissioning requirements/testing. Solid/strong working knowledge/experience/background of control systems, BACNet, Tridium networks, and overall “systems” functional testing sequences, steps, procedures, and integration. Knowledge of air and water testing/adjusting/balancing procedures and expectations. Knowledge in fire alarm systems and integration. Working knowledge of architectural, structural, civil documents to understand how the mechanical/electrical systems are integrated into the building. Good understanding of Specifications Divisions and where to go in the various sections in coordinating responsibilities and various testing and documentation requirements of the project. Understanding of the many common Codes for Building, Plumbing, NFPA (fire, electrical, etc.), Mechanical, and Life Safety. Physical Requirements: Must be able to climb permanent and temporary stairs, ladders, crouch, kneel, and stand for long periods of time. Must also be able to lift or move up to 50 pounds occasionally. Must be able to utilize close vision, peripheral vision, depth perception, and have the ability to adjust focus. Requires regular use of hands for inspection purposes. Must have a solid understanding of jobsite risks and know/adhere to appropriate safety protocol at all times. Must be able to work on multiple projects at one time. PHYSICAL DEMANDS AND WORK ENVIRONMENT: · Occasionally (less than 1/3 of the job) · Frequently (1/3 to 2/3 of the job) · Continually (more than 2/3 of the job) Frequently required to stand. Frequently required to sit. Frequently required to utilize hand and finger dexterity. Frequently required to wear a respirator. Frequently required to work in confined spaces. Continually required to walk- up to 10 miles per day. Continually required to talk or hear. Occasionally required to climb, balance, bend, stoop, kneel or crawl. Occasionally work near moving mechanical parts Occasionally work in high, precarious places Occasionally work around fumes, airborne particles, or toxic chemicals While performing the duties of this job, the noise level in the work environment is usually moderate. The employee must occasionally lift and /or move more than 20 pounds. Specific vision abilities required by this job include Close vision; Distance vision; Peripheral vision; Depth perception and ability to adjust focus. Additional remarks regarding work environment: Chemical hazards are primarily mitigated through engineering controls, but some uncontrolled chemicals from incidental spills requiring cleanup evaluation may require use of respirator and other PPE. You must be able to wear personal protective equipment, including protective eye wear, hard hat, lab coat, gloves, steel-toed shoes, and hearing protection. Must be able to safely access and traverse indoor and outdoor obstacles for site inspections, including climbing ladders, walking on stairs, catwalks, and other types of uneven surfaces where activity inspections are needed. MSR-FSR is an EEO/Affirmative Action Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or any other legally protected status. Benefits Health Care Plan (Medical, Dental & Vision) 401K Life Insurance Flexible Spending Accounts (FSA) Disability Insurance Paid Time Off Training & Development

CTL Engineering is hiring Technicians | Construction Inspection Services for ODOT ( transportation ) projects. CTL Engineering (*************** is an award winning, full service consulting engineering firm with (15) locations across OH, IN, WV, KY, NC, SC, and VA with a rich history over our (98) years in business. We provide civil/site design and land surveying, environmental, geotechnical, construction administration & inspection, accident reconstruction, roofing/building envelope, A/V system design, troubleshooting & installation, transportation design (bridge/roadway), and specialized testing services to the construction industry. We are looking for Technicians | Construction Inspection Services who will play a key role in all aspects of construction inspection services and quality control for state (ODOT), county, and local Clients. You'll be involved in the testing and inspection aspects of wide variety of construction projects including those primarily in the roadway/bridge arena (but could also include water/wastewater, aviation, commercial, and municipal utility/infrastructure sectors). We'll teach/you'll learn aspects of construction inspection and creative problem-solving skills while collaborating closely with institutions/municipal agencies. This position will use experience while learning new skills to assist clients through our cross-functional team dynamic and company culture. If you are passionate about staying ahead of industry trends, enjoy problem-solving, and have a n interest in construction inspection and quality control, we want to hear from you! This is more than a job posting … it's an invitation to bring your expertise to a company where innovation and passion converge seamlessly. Highlights: This position will include a mix of primarily field and laboratory work with some office work. This position works independently on broad projects under direction of a Dept. Manager while managing a team of direct reports or projects. Projects are typically in the Cleveland/northern OH region. Frequent travel within this region is expected. A stipend for personal vehicle use or a company take-home vehicle will be provided, based on the assignment. ODOT large project experience is a strong plus. Responsibilities: Perform construction engineering technician (inspection) services related to earthwork, concrete, asphalt and utility construction for ODOT, municipalities, and private sector clients. Perform engineering and construction field testing primarily roadway/bridge projects. Inspect and report on specific aspects of construction works in progress, such as concrete pours, rebar placement, pipe replacements as examples. Inspect and sample construction materials. Perform computations with formulas, plots data and draws simple curves and graphs. Assist Engineers in field during soil and materials investigations. Ensure that job site tests/observations, including quality control, quality assurance, and verifications are performed in accordance with the standard test/observation methods, project specifications and other contract documents. Perform lab testing and observation of soils, concrete and asphalt. Perform inspections for construction projects to ensure contractor compliance with state specifications, plans, and/or proposals for primarily roadway work, roadway, pavement. Verify plan quantities and calculations as bid plans. Prepare and maintain project records and reports. May assist with notifying the Contractor or the Project Engineer of non-conforming work. Knowledge, Skills and Abilities: Knowledge of engineering, construction, testing and inspection principles. Experience with materials and lab testing. Experience with standard testing and observation methods. Understanding of construction or engineering services. Experience in performing quality control initiatives and performance testing. Skill in lab reporting, writing reports and maintaining records Strong written and verbal communication skills. Ability to work in external environment conditions during difficult weather. Ability to provide status updates independently. Be quality-minded and client-focused. Minimum Qualifications: 0-2+ years experience in construction inspection and testing. new Trade School/Bachelor's grads are encouraged to apply - start a career! Familiarity with highway construction specifications and previous field experience is a plus/not required. Previous experience working for a testing company a plus. Experience with concrete, asphalt, earthwork, and utility construction engineering services and inspection/testing is nice to have but not required. Experience with field and laboratory testing of soil, concrete, asphalt, aggregate, masonry, structural steel and fireproofing, etc. is a plus but not required. Preferred certifications: ACI Grade I, DOT Asphalt Tech, NICET Level II Soils, ICC Special inspections and/or CWI/NDT inspectors - good to have but not required. Must have a valid driver license and an acceptable driving record. Benefits: CTL Engineering offers a competitive compensation and benefits package including medical, life, and disability insurance, paid time off, an award-winning ESOP ( Employee Stock Ownership Plan ), and a 401K plan. CTL Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description CTL Engineering is hiring Technicians | Construction Inspection Services for ODOT ( transportation ) projects. CTL Engineering (*************** is an award winning, full service consulting engineering firm with (15) locations across OH, IN, WV, KY, NC, SC, and VA with a rich history over our (98) years in business. We provide civil/site design and land surveying, environmental, geotechnical, construction administration & inspection, accident reconstruction, roofing/building envelope, A/V system design, troubleshooting & installation, transportation design (bridge/roadway), and specialized testing services to the construction industry. We are looking for Technicians | Construction Inspection Services who will play a key role in all aspects of construction inspection services and quality control for state (ODOT), county, and local Clients. You'll be involved in the testing and inspection aspects of wide variety of construction projects including those primarily in the roadway/bridge arena (but could also include water/wastewater, aviation, commercial, and municipal utility/infrastructure sectors). We'll teach/you'll learn aspects of construction inspection and creative problem-solving skills while collaborating closely with institutions/municipal agencies. This position will use experience while learning new skills to assist clients through our cross-functional team dynamic and company culture. If you are passionate about staying ahead of industry trends, enjoy problem-solving, and have a n interest in construction inspection and quality control, we want to hear from you! This is more than a job posting … it's an invitation to bring your expertise to a company where innovation and passion converge seamlessly. Highlights: This position will include a mix of primarily field and laboratory work with some office work. This position works independently on broad projects under direction of a Dept. Manager while managing a team of direct reports or projects. Projects are typically in the Cleveland/northern OH region. Frequent travel within this region is expected. A stipend for personal vehicle use or a company take-home vehicle will be provided, based on the assignment. ODOT project experience is a strong plus. Responsibilities: Perform construction engineering technician (inspection) services related to earthwork, concrete, asphalt and utility construction for ODOT, municipalities, and private sector clients. Perform engineering and construction field testing primarily roadway/bridge projects. Inspect and report on specific aspects of construction works in progress, such as concrete pours, rebar placement, pipe replacements as examples. Inspect and sample construction materials. Perform computations with formulas, plots data and draws simple curves and graphs. Assist Engineers in field during soil and materials investigations. Ensure that job site tests/observations, including quality control, quality assurance, and verifications are performed in accordance with the standard test/observation methods, project specifications and other contract documents. Perform lab testing and observation of soils, concrete and asphalt. Perform inspections for construction projects to ensure contractor compliance with state specifications, plans, and/or proposals for primarily roadway work, roadway, pavement. Verify plan quantities and calculations as bid plans. Prepare and maintain project records and reports. May assist with notifying the Contractor or the Project Engineer of non-conforming work. Knowledge, Skills and Abilities: Knowledge of engineering, construction, testing and inspection principles. Experience with materials and lab testing. Experience with standard testing and observation methods. Understanding of construction or engineering services. Experience in performing quality control initiatives and performance testing. Skill in lab reporting, writing reports and maintaining records Strong written and verbal communication skills. Ability to work in external environment conditions during difficult weather. Ability to provide status updates independently. Be quality-minded and client-focused. Minimum Qualifications: 0-2+ years experience in construction inspection and testing. new Trade School/Bachelor's grads are encouraged to apply - start a career! Familiarity with highway construction specifications and previous field experience is a plus/not required. Previous experience working for a testing company a plus. Experience with concrete, asphalt, earthwork, and utility construction engineering services and inspection/testing is nice to have but not required. Experience with field and laboratory testing of soil, concrete, asphalt, aggregate, masonry, structural steel and fireproofing, etc. is a plus but not required. Preferred certifications: ACI Grade I, DOT Asphalt Tech, NICET Level II Soils, ICC Special inspections and/or CWI/NDT inspectors - good to have but not required. Must have a valid driver license and an acceptable driving record. Benefits: CTL Engineering offers a competitive compensation and benefits package including medical, life, and disability insurance, paid time off, an award-winning ESOP ( Employee Stock Ownership Plan ), and a 401K plan. CTL Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

CTL Engineering is hiring Technicians | Construction Inspection Services for ODOT ( transportation ) projects. CTL Engineering (*************** is an award winning, full service consulting engineering firm with (15) locations across OH, IN, WV, KY, NC, SC, and VA with a rich history over our (98) years in business. We provide civil/site design and land surveying, environmental, geotechnical, construction administration & inspection, accident reconstruction, roofing/building envelope, A/V system design, troubleshooting & installation, transportation design (bridge/roadway), and specialized testing services to the construction industry. We are looking for Technicians | Construction Inspection Services who will play a key role in all aspects of construction inspection services and quality control for state (ODOT), county, and local Clients. You'll be involved in the testing and inspection aspects of wide variety of construction projects including those primarily in the roadway/bridge arena (but could also include water/wastewater, aviation, commercial, and municipal utility/infrastructure sectors). We'll teach/you'll learn aspects of construction inspection and creative problem-solving skills while collaborating closely with institutions/municipal agencies. This position will use experience while learning new skills to assist clients through our cross-functional team dynamic and company culture. If you are passionate about staying ahead of industry trends, enjoy problem-solving, and have a n interest in construction inspection and quality control, we want to hear from you! This is more than a job posting … it's an invitation to bring your expertise to a company where innovation and passion converge seamlessly. Highlights: This position will include a mix of primarily field and laboratory work with some office work. This position works independently on broad projects under direction of a Dept. Manager while managing a team of direct reports or projects. Projects are typically in the Cleveland/northern OH region. Frequent travel within this region is expected. A stipend for personal vehicle use or a company take-home vehicle will be provided, based on the assignment. ODOT project experience is a strong plus. Responsibilities: Perform construction engineering technician (inspection) services related to earthwork, concrete, asphalt and utility construction for ODOT, municipalities, and private sector clients. Perform engineering and construction field testing primarily roadway/bridge projects. Inspect and report on specific aspects of construction works in progress, such as concrete pours, rebar placement, pipe replacements as examples. Inspect and sample construction materials. Perform computations with formulas, plots data and draws simple curves and graphs. Assist Engineers in field during soil and materials investigations. Ensure that job site tests/observations, including quality control, quality assurance, and verifications are performed in accordance with the standard test/observation methods, project specifications and other contract documents. Perform lab testing and observation of soils, concrete and asphalt. Perform inspections for construction projects to ensure contractor compliance with state specifications, plans, and/or proposals for primarily roadway work, roadway, pavement. Verify plan quantities and calculations as bid plans. Prepare and maintain project records and reports. May assist with notifying the Contractor or the Project Engineer of non-conforming work. Knowledge, Skills and Abilities: Knowledge of engineering, construction, testing and inspection principles. Experience with materials and lab testing. Experience with standard testing and observation methods. Understanding of construction or engineering services. Experience in performing quality control initiatives and performance testing. Skill in lab reporting, writing reports and maintaining records Strong written and verbal communication skills. Ability to work in external environment conditions during difficult weather. Ability to provide status updates independently. Be quality-minded and client-focused. Minimum Qualifications: 0-2+ years experience in construction inspection and testing. new Trade School/Bachelor's grads are encouraged to apply - start a career! Familiarity with highway construction specifications and previous field experience is a plus/not required. Previous experience working for a testing company a plus. Experience with concrete, asphalt, earthwork, and utility construction engineering services and inspection/testing is nice to have but not required. Experience with field and laboratory testing of soil, concrete, asphalt, aggregate, masonry, structural steel and fireproofing, etc. is a plus but not required. Preferred certifications: ACI Grade I, DOT Asphalt Tech, NICET Level II Soils, ICC Special inspections and/or CWI/NDT inspectors - good to have but not required. Must have a valid driver license and an acceptable driving record. Benefits: CTL Engineering offers a competitive compensation and benefits package including medical, life, and disability insurance, paid time off, an award-winning ESOP ( Employee Stock Ownership Plan ), and a 401K plan. CTL Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description CTL Engineering is hiring Technicians | Construction Inspection Services for ODOT ( transportation ) projects. CTL Engineering (*************** is an award winning, full service consulting engineering firm with (15) locations across OH, IN, WV, KY, NC, SC, and VA with a rich history over our (98) years in business. We provide civil/site design and land surveying, environmental, geotechnical, construction administration & inspection, accident reconstruction, roofing/building envelope, A/V system design, troubleshooting & installation, transportation design (bridge/roadway), and specialized testing services to the construction industry. We are looking for Technicians | Construction Inspection Services who will play a key role in all aspects of construction inspection services and quality control for state (ODOT), county, and local Clients. You'll be involved in the testing and inspection aspects of wide variety of construction projects including those primarily in the roadway/bridge arena (but could also include water/wastewater, aviation, commercial, and municipal utility/infrastructure sectors). We'll teach/you'll learn aspects of construction inspection and creative problem-solving skills while collaborating closely with institutions/municipal agencies. This position will use experience while learning new skills to assist clients through our cross-functional team dynamic and company culture. If you are passionate about staying ahead of industry trends, enjoy problem-solving, and have a n interest in construction inspection and quality control, we want to hear from you! This is more than a job posting … it's an invitation to bring your expertise to a company where innovation and passion converge seamlessly. Highlights: This position will include a mix of primarily field and laboratory work with some office work. This position works independently on broad projects under direction of a Dept. Manager while managing a team of direct reports or projects. Projects are typically in the northeastern OH region. Frequent travel within this region is expected. A stipend for personal vehicle use or a company take-home vehicle will be provided, based on the assignment. ODOT project experience is a strong plus. Responsibilities: Perform construction engineering technician (inspection) services related to earthwork, concrete, asphalt and utility construction for ODOT, municipalities, and private sector clients. Perform engineering and construction field testing primarily roadway/bridge projects. Inspect and report on specific aspects of construction works in progress, such as concrete pours, rebar placement, pipe replacements as examples. Inspect and sample construction materials. Perform computations with formulas, plots data and draws simple curves and graphs. Assist Engineers in field during soil and materials investigations. Ensure that job site tests/observations, including quality control, quality assurance, and verifications are performed in accordance with the standard test/observation methods, project specifications and other contract documents. Perform lab testing and observation of soils, concrete and asphalt. Perform inspections for construction projects to ensure contractor compliance with state specifications, plans, and/or proposals for primarily roadway work, roadway, pavement. Verify plan quantities and calculations as bid plans. Prepare and maintain project records and reports. May assist with notifying the Contractor or the Project Engineer of non-conforming work. Knowledge, Skills and Abilities: Knowledge of engineering, construction, testing and inspection principles. Experience with materials and lab testing. Experience with standard testing and observation methods. Understanding of construction or engineering services. Experience in performing quality control initiatives and performance testing. Skill in lab reporting, writing reports and maintaining records Strong written and verbal communication skills. Ability to work in external environment conditions during difficult weather. Ability to provide status updates independently. Be quality-minded and client-focused. Minimum Qualifications: 0-2+ years experience in construction inspection and testing. new Trade School/Bachelor's grads are encouraged to apply - start a career! Familiarity with highway construction specifications and previous field experience is a plus/not required. Previous experience working for a testing company a plus. Experience with concrete, asphalt, earthwork, and utility construction engineering services and inspection/testing is nice to have but not required. Experience with field and laboratory testing of soil, concrete, asphalt, aggregate, masonry, structural steel and fireproofing, etc. is a plus but not required. Preferred certifications: ACI Grade I, DOT Asphalt Tech, NICET Level II Soils, ICC Special inspections and/or CWI/NDT inspectors - good to have but not required. Must have a valid driver license and an acceptable driving record. Benefits: CTL Engineering offers a competitive compensation and benefits package including medical, life, and disability insurance, paid time off, an award-winning ESOP ( Employee Stock Ownership Plan ), and a 401K plan. CTL Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

CTL Engineering is hiring Technicians | Construction Inspection Services for ODOT ( transportation ) projects. CTL Engineering (*************** is an award winning, full service consulting engineering firm with (15) locations across OH, IN, WV, KY, NC, SC, and VA with a rich history over our (98) years in business. We provide civil/site design and land surveying, environmental, geotechnical, construction administration & inspection, accident reconstruction, roofing/building envelope, A/V system design, troubleshooting & installation, transportation design (bridge/roadway), and specialized testing services to the construction industry. We are looking for Technicians | Construction Inspection Services who will play a key role in all aspects of construction inspection services and quality control for state (ODOT), county, and local Clients. You'll be involved in the testing and inspection aspects of wide variety of construction projects including those primarily in the roadway/bridge arena (but could also include water/wastewater, aviation, commercial, and municipal utility/infrastructure sectors). We'll teach/you'll learn aspects of construction inspection and creative problem-solving skills while collaborating closely with institutions/municipal agencies. This position will use experience while learning new skills to assist clients through our cross-functional team dynamic and company culture. If you are passionate about staying ahead of industry trends, enjoy problem-solving, and have a n interest in construction inspection and quality control, we want to hear from you! This is more than a job posting … it's an invitation to bring your expertise to a company where innovation and passion converge seamlessly. Highlights: This position will include a mix of primarily field and laboratory work with some office work. This position works independently on broad projects under direction of a Dept. Manager while managing a team of direct reports or projects. Projects are typically in the northeastern OH region. Frequent travel within this region is expected. A stipend for personal vehicle use or a company take-home vehicle will be provided, based on the assignment. ODOT project experience is a strong plus. Responsibilities: Perform construction engineering technician (inspection) services related to earthwork, concrete, asphalt and utility construction for ODOT, municipalities, and private sector clients. Perform engineering and construction field testing primarily roadway/bridge projects. Inspect and report on specific aspects of construction works in progress, such as concrete pours, rebar placement, pipe replacements as examples. Inspect and sample construction materials. Perform computations with formulas, plots data and draws simple curves and graphs. Assist Engineers in field during soil and materials investigations. Ensure that job site tests/observations, including quality control, quality assurance, and verifications are performed in accordance with the standard test/observation methods, project specifications and other contract documents. Perform lab testing and observation of soils, concrete and asphalt. Perform inspections for construction projects to ensure contractor compliance with state specifications, plans, and/or proposals for primarily roadway work, roadway, pavement. Verify plan quantities and calculations as bid plans. Prepare and maintain project records and reports. May assist with notifying the Contractor or the Project Engineer of non-conforming work. Knowledge, Skills and Abilities: Knowledge of engineering, construction, testing and inspection principles. Experience with materials and lab testing. Experience with standard testing and observation methods. Understanding of construction or engineering services. Experience in performing quality control initiatives and performance testing. Skill in lab reporting, writing reports and maintaining records Strong written and verbal communication skills. Ability to work in external environment conditions during difficult weather. Ability to provide status updates independently. Be quality-minded and client-focused. Minimum Qualifications: 0-2+ years experience in construction inspection and testing. new Trade School/Bachelor's grads are encouraged to apply - start a career! Familiarity with highway construction specifications and previous field experience is a plus/not required. Previous experience working for a testing company a plus. Experience with concrete, asphalt, earthwork, and utility construction engineering services and inspection/testing is nice to have but not required. Experience with field and laboratory testing of soil, concrete, asphalt, aggregate, masonry, structural steel and fireproofing, etc. is a plus but not required. Preferred certifications: ACI Grade I, DOT Asphalt Tech, NICET Level II Soils, ICC Special inspections and/or CWI/NDT inspectors - good to have but not required. Must have a valid driver license and an acceptable driving record. Benefits: CTL Engineering offers a competitive compensation and benefits package including medical, life, and disability insurance, paid time off, an award-winning ESOP ( Employee Stock Ownership Plan ), and a 401K plan. CTL Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.