Design engineer jobs in Arizona

- 1,476 jobs

Senior Maintenance
Marriott International, Inc. 4.6
Design engineer job in Scottsdale, AZ
Additional InformationEvening Shift Job Number25197702 Job CategoryEngineering & Facilities LocationJW Marriott Scottsdale Camelback Inn Resort & Spa, 5402 East Lincoln Drive, Scottsdale, Arizona, United States, 85253VIEW ON MAP ScheduleFull Time Located Remotely?N Position Type Non-Management Pay Range: $28.25-$28.25 per hour POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display thorough knowledge of building systems, emergency response, and building documentation including reading standard blue prints and electrical schematics concerning plumbing and HVAC. Display advanced engineering operations skills and general mechanical ability. Display professional journeyman level expertise in at least three of the following areas with basic skills in the remaining: air conditioning and refrigeration, electrical, plumbing, carpentry and finish skills, mechanical, general building management, pneumatic/electronic systems and controls, and/or energy conservation. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Perform routine inspections of the entire property, noting safety hazards, lack of illumination, down equipment (such as ice makers, fans, extractors, pumps), and take immediate corrective action. Inspect and repair all mechanical equipment including, but not limited to: appliances, HVAC, electrical and plumbing components, diagnose and repair of boilers, pumps and related components. Use the Lockout/Tagout system before performing any maintenance work. Display thorough knowledge of maintenance contracts and vendors. Display advanced knowledge of engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineers I, II, and III) as necessary and supervise work in progress and act in a supervisory role in the absence of supervisors and/or management. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests' service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers and/or point of sale systems. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Certificate in two-year technical diploma program for HVAC/refrigeration. Related Work Experience: Extensive experience and training in general maintenance (advanced repairs), electrical or refrigeration, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Valid Driver's License License or certification in refrigeration or electrical (earned, or currently working towards receiving) Universal Chlorofluorocarbon (CFC) certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that's synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you're happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand's namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you'll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That's The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.
$28.3-28.3 hourly 3d ago
CAD CAM Engineer 3 #2673
Amarx Search, Inc.
Design engineer job in Chandler, AZ
in Chandler, AZ Pay: $44.50 to $83.50 2673 with a large international defense / aerospace company * CAD CAM Engineer 3 * Please apply ONLY if you have 5+ years PWB design with Cadence Allegro United States Citizenship is required due to government contract requirement; we are unable to sponsor at this time. We can ONLY consider your application if you have: 1: Minimum 5 years recent PWB design layout experience using the Cadence Allegro design tool suite; 2: AA/AS degree or other 2-year post high school training with a minimum of 5 years of relevant experience; 3: Working knowledge of high density complex, multilayer boards (6-16 layers); 4: Experience in the layout/routing of digital and analog circuits, including power circuits; 5: Experience with layout/routing of high speed digital and controlled-impedance circuits (SERDES, DDR3/DDR4, etc); 6: Experience with rigid-flex assemblies; 7: Ability to prepare artwork (ODB++, Gerbers) for fabrication of PWBs; 8: Extensive experience with footprint/symbol creation and library management; 9: Understanding of IPC-2221 and IPC-7351 specifications; 10: Ability to acquire security clearance. We are looking for an Engineer - CAD CAM 3 to support Launch Vehicles Avionics Design Group DESIRED (not required) SKILLS: :: Working understanding of the Printed Wiring Assembly manufacturing process; :: Experience with CAM350 and/or Valor DFM software tools; :: Experience with OrCAD Layout and Mentor PADS or Xpedition tool suites; Duties and Responsibilities == Design/Layout printed wiring boards (PWBs) for military/aerospace avionics and test applications. == Communicate project status to your direct Manager and the Program Engineering Manager. == Collaborate with the circuit design engineer and mechanical engineers to ensure proper form, fit, and function of the design. == Participate in Peer Reviews and Design Milestone reviews throughout the development process No interview, relocation or living expenses provided Please send resume to - Amarx Search, Inc. - amarx.com
$44.5-83.5 hourly 60d+ ago
Project Engineer
Clark Pacific 4.1
Design engineer job in Phoenix, AZ
**Compensation is between $85,000 to $95,000 DOE** **Hiring Bonus** At Clark Pacific, exciting building projects are just the beginning! As the West Coast's leading prefabricator of building systems, our talented team of professionals bridge the gap between construction and manufacturing every day, providing solutions and innovations that deliver high-performance structures with enhanced cost, schedule, and safety. It all starts with the Clark Pacific Employee Experience: top talent people working together in an environment that fosters collaboration, growth & development, and compassion. We are great people doing great things, together! We have over 60 years of experience and have successfully contributed to some of the West Coast's most iconic buildings including the Golden 1 Center, the Apple II Campus, the San Francisco 49ers stadium, and the Stanford Escondido Village Graduate Housing to name just a few. When people want to experience, quality, and a partner they can trust, they choose Clark Pacific. Repeat customers, numerous building and environmental stewardship awards, and great employees are some of the things for which we are most proud and grateful. Clark Pacific is seeking a Project Engineer to support our CA locations. Overview of the position: At Clark Pacific, the Project Engineer is a position that facilitates the successful design, fabrication, and installation of architectural and structural building systems. Working as part of an integrated team within a specific business unit, this role applies engineering, project management, problem solving, and communication skills across all levels and disciplines within the organization, significantly contributing to the project success of some of the West Coast's most iconic and exciting prefabricated buildings. Initial activities pertaining to the Design Phase, including, but not limited to: Submittal drawings (floor plans, elevations, material specifications, connection details, Reinforcing details, General panel details, Design approvals, Reinforcement drawings, and Miscellaneous metal drawings. Manufacturing-related activities pertaining to the Production Phase, including, but not limited to: Providing complete shop drawings (panel elements, structural elements, formwork, form change studies, Birdseye, stripping and yard handling studies to facilitate manufacturing, Ensuring purchasing of all required materials and forms, Design lifting hardware, loops, rigging, brackets, and inserts for stripping and handling forces, Provide and maintain a casting schedule, Perform quality checks, and Engage in start-up meetings with manufacturing, and remain engaged throughout each project's life cycle. Field-related activities pertaining to the Erection Phase, including, but not limited to: Preparing crane studies, rigging diagrams, and the overall project erection plan as well as erection sequence, load lists, and diagrams, Coordinate shipping of miscellaneous metal, Coordinate field manpower requirements with Field & Trucking team to alignment to budget, Ensure fall protection plan is in place, Professionally represent the Company at the field erection site, and Inspect erection quality and performance to plan and budget. General project management including, but not limited to: Project performance to contract specifications, budget, and time commitments, Issue identification, problem-solving, resolution, and escalation (as necessary), Coordinate necessary and requested procedure submittals (such as welding, grouting, post-tensioning, etc., Engage with internal resources throughout the Company to contribute, learn, and develop professionally. Preferred Education and Experience BS in Civil Engineering or Mechanical Engineering, or an Engineering-related degree EIT certification preferred Interested? Want to learn more? If you're a hard-working nice person who is smart and curious, and think that this position is right for you, we want to hear from you. Please apply and let's begin the journey. Welcome to Clark Pacific. Let's do great things together! Clark Pacific is an Equal Opportunity Employer #MV-L1
$85k-95k yearly 1d ago
Project Engineer
Graycor 4.3
Design engineer job in Phoenix, AZ
As a Project Engineer at Graycor, you will enroll in our Engineering Mentoring Program designed to expose you with the critical hands-on experience necessary to build your successful career in construction. You will receive ongoing, specialized one-on-one training, coaching and mentoring on a variety of challenging and interesting project assignments, and a full rotation between departments. You will be actively involved in your career development, making self-assessments of your progress against established core competencies. Engineers will typically spend 24 months in the Engineer Mentoring Program before advancing to a new position with Graycor. AS A PROJECT ENGINEER, YOU WILL GAIN EXPERIENCE IN THE FOLLOWING AREAS: Project Management/ Project Controls: Assist Project Manager and Superintendent in the efficient control and management of the project, while ensuring safety and quality programs are being executed on the project site. Develop and maintain the critical path project schedule, including ongoing revisions. Assist the Project Manager and/or Superintendent in the preparation of short-term look-ahead schedules and the application of Lean Construction techniques. Maintain project documentation and expedite to the Owner, Architect, and Engineers for approval. Develop and maintain a thorough understanding of the provisions and requirements of all contract documents, including plans, specifications, owner's contract, subcontracts and purchase orders. Assist in the procurement of equipment and materials, and track and expedite their delivery. Track and evaluate subcontractor and vendor performance. Interact with subcontractors and vendors regarding technical and contractual matters. Estimating/ Preconstruction Services: Assist in the preparation of estimates and quotations to obtain project work. Assist the Project Manager and/or Estimator in bid preparation, subcontractor/vendor solicitation, evaluation and award. TO BE SUCCESSFUL IN THE GRAYCOR ENGINEERING MENTORING PROGRAM, YOU WILL NEED: Bachelor's degree in construction management, engineering, or other relevant technical discipline. 0-3 years of relevant construction internship or post-undergraduate experience. The ability to travel extensively and temporarily reside at the project site for extended periods of time, with travel home provided every other weekend. Travel subsistence pay and travel incentive bonuses may apply. Ambition to grow professionally and acquire new knowledge and skills. Our most successful Engineers are motivated to succeed and are passionate about construction across a variety of projects. Our typical project portfolio includes retail mall development, entertainment/ recreational, hospitality/lodging, office, logistics/distribution and cold storage, manufacturing, and green/ LEED building industries. The fortitude to juggle competing priorities in a fast-paced environment. Multi-tasking with a sense of urgency while maintaining strong attention to detail and accuracy is crucial. Effective communication skills, with the ability to interact professionally with managers, co-workers, subcontractors, and construction craft employees. Problem solving and critical thinking skills. Working knowledge of MS Office Suite. Additional basic knowledge of scheduling, estimating and takeoff software is a plus. We use Primavera P6, WinEst and On-Screen Takeoff.
$68k-90k yearly est. 3d ago
Project Engineer
Dibble CM
Design engineer job in Phoenix, AZ
Dibble CM is looking for a motivated Project Engineer who is ready to join our Team. As a Project Engineer, you'll be part of a collaborative team of professionals dedicated to delivering critical public infrastructure projects that serve our communities. Responsibilities Project document control Manage distribution of submittals and requests for information Project cost review, monitoring and reporting Schedule review and management Meeting coordination Project development Qualifications Bachelor's degree in Construction Management, Construction Engineering, Civil Engineering or similar. Minimum of 2 years' experience working on public works construction projects. Proficiency in reading and understanding civil project plans and specifications. Familiarity with construction management software. Good written and verbal communication skills. Prefers working in a team environment. We are a Phoenix-based construction management company that specializes in providing construction management services for state and local public agencies throughout Arizona. The Dibble CM team enjoys our industry-leading benefits program, the ability to balance work and home life, and a clear path for development and growth. Benefits 100% premium-paid major medical, dental and vision coverage for employees and their families, life, short-term disability, long-term disability, a 401(k) plan with match and no waiting period, generous paid time off, 7 paid holidays, and tuition reimbursement programs including some that dependents are eligible for! Our people-focused culture is important, and we consider our employees to be our greatest asset. This culture is why we have so many long-term employees with our firm. Our employees enjoy an industry-leading benefits program, the ability to balance their home and work life, opportunities for growth and development, company activities, and various opportunities to give back through community service. Dibble CM is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status .
$67k-92k yearly est. 3d ago
Project Engineer
Clayco 4.4
Design engineer job in Phoenix, AZ
About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For The construction Project Engineer will be based on the construction project site and will service our clients in a multi-state region and may even travel across the country. You will have the opportunity to build large, complicated, iconic design-build projects $30 million and above. In this role you will be part of a team responsible for taking projects from conceptual stages through closeout. The Specifics of the Role Build client and subcontractor relationships. Team with Architects, Engineers, and Planners to create and manage a design schedule. Assist in the establishment of project forecasts and budgets. Manage costs. Accept responsibility for project execution. Mentor and develop Interns and new incoming project management staff. Requirements Bachelor's Degree in Construction Management, Engineering, Architecture or related. 0 to 5 years of experience managing construction projects, ideally design-build. Demonstrated knowledge of construction principles, practices, and technology. Previous experience on a successful project management team. Ability to walk a job site, climb ladders, and scale multi-floor scaffolding. Ability to lift objects of at least 50 lbs. Some Things You Should Know Our clients and projects are nationwide - Travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco? 2025 Best Places to Work - St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2025 ENR Midwest - Midwest Contractor (#1). 2025 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2025 ENR Top 100 Green Contractors - Green Contractor (Top 3). 2025 ENR Top 25 Data Center Builders - Data Center Contractor (Top 3). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.
$67k-93k yearly est. 5d ago
Electrical Engineer
Tessenderlo Kerley, Inc. 4.2
Design engineer job in Phoenix, AZ
Tessenderlo Kerley, Inc. is a company of diverse businesses unified by shared values and vision. We serve the agriculture, mining, industrial and water reclamation markets with a broad range of products and technologies, worldwide. Serving these customers well is a passion and a commitment-one that the people of Tessenderlo Kerley find rewarding, empowering and meaningful. If you want the work you do to make a positive impact on the world in which we live, and work alongside innovative, quality-focused people of vision, Tessenderlo Kerley is the right place for you. Is your CV ready If so, and you are confident this is the role for you, make sure to apply asap. Are you an experienced Electrical Engineer ready to take the next step in your career? Do you enjoy designing and troubleshooting complex systems while collaborating across disciplines in a fast-paced industrial environment? If so, we invite you to join our Technical Services team as an Electrical Engineer at our Corporate Office in Phoenix, Arizona! Our ideal location is the Phoenix area, where this position is based. However, for highly qualified candidates, we may offer hybrid or remote flexibility if you reside near one of our centrally located plants. Occasional onsite presence will be required for project execution, training, and plant support. Eligible plant locations include: Ponca City & Tulsa Oklahoma Coffeyville, Kansas Billings, Montana Defiance, Ohio Why Join Us? âš¡ Challenging & Varied Projects â€" Work on electrical design for industrial chemical facilities, from power distribution and schematics to plant support and turnarounds. xevrcyc PandoLogic. Keywords: Electrical Engineer, Location: Phoenix, AZ - 85013
$66k-89k yearly est. 1d ago
Mechanical Engineer III- Design
Rain Bird 4.8
Design engineer job in Tucson, AZ
Rain Bird is seeking a Mechanical Engineer III for our Tucson, AZ facility. The Mechanical Engineer will design engineered to order irrigation pump stations and apply design standards to improve engineering throughput. This position will manage multiple projects at one time with deadlines according to a production schedule. The successful candidate will have excellent written and verbal communication skills, design experience, and 3D CAD experience. Responsibilities * Design irrigation pump stations by applying fluid dynamics principles and industry standards to ensure customer requirements are met * Manage design projects utilizing outsourced engineering contractors to complete multiple pump station designs each week. * Coordinate effectively with electrical engineers to ensure mechanical designs are compatible with electrical requirements * Generate production prints, Bills-of-Material, and 3D models for irrigation pump stations * Produce customer approval (sign-off) drawings * Execute design and project management activities to ensure timely completion of NPD and COGS reduction initiatives * Provide basic cost analysis for design comparisons * Provide technical support to after-sales service engineers * Work effectively with other plant functional groups including maintenance, production, materials, and quality * Additional duties as assigned. Qualifications * Bachelor of Science Degree in Mechanical Engineering or similar discipline * 5+ years of experience in engineering roles * Competence in mechanical design * Solid understanding of fabrication / machining techniques. * Excellent theoretical and applied knowledge of design and mechanical engineering concepts. * Experience in drafting 3-D assemblies and producing 2-D production prints. * Ability to perform basic financial analysis and cost justifications. * Ability to handle multiple priorities and tasks with minimal supervision. * Strong English verbal and written communication skills. DESIRED QUALIFICATIONS: * SolidWorks experience * Experience with pump and motor applications * Experience in high mix, low volume manufacturing Must have authorization to work in the US without sponsorship Rain Bird Corporation is an Equal Opportunity Employer
$72k-92k yearly est. Auto-Apply 40d ago
Mechanical Design Engineer/ Design Engineer
Collabera 4.5
Design engineer job in Phoenix, AZ
Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description Job Title: Mechanical Design Engineer Duration: 12+ months (Possibility of Extension) Role Summary: • This position provides mechanical engineering/design of ultrasound components, assemblies, and production tooling. • This includes mechanical design, Pro/E CAD modeling, detailed drawings, prototyping, V&V testing, engineering change orders, part specifications, and electronic product data management (ePDM). • This position supports cost reduction, quality and compliance, and new product development projects. Qualifications • BS in Mechanical Engineering • 5 years relative work experience designing mechanical components and assemblies • Experience with cables and harness, production tooling, injected molded plastics, labeling and packaging. • Experience with design for manufacturing principles • CAD modeling in ProE and AutoCAD • Strong interpersonal, communication, and organization skills • Design for manufacturing experience Additional Information To discuss on this oportunity please reach Himanshu Prajapat on ************ **********************************
$68k-89k yearly est. Easy Apply 60d+ ago
Aerodynamics GNC Engineer - Level 3 (Chandler)
Northrop Grumman 4.7
Design engineer job in Chandler, AZ
RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. If forging a secure future excites you, look no further! Northrop Grumman's Space Sector provides an arena where your passion for innovation and quest for exploration are welcome. As a Aerodynamics GNC Engineer - Level 3 your role at Chandler, AZ will be pivotal in supporting missions critical to national and global security. This position is 100% onsite and cannot accommodate telecommute work. Ready to join forces with our visionary team? Join Northrop Grumman's cutting-edge Aerodynamics, Guidance, Navigation, and Controls (AGNC) team, where innovation meets mission-critical performance. We are seeking forward-thinking professionals with a passion for solving complex problems, pushing the boundaries of technology, and delivering precision-engineered solutions that ensure the success of the most advanced aerospace vehicles. From hypersonics to spacecraft, you'll be part of a collaborative environment that blends technical expertise with creativity to develop systems that go beyond limits-and beyond expectations. If you thrive in a fast-paced, impact-driven environment and want your work to make a difference, this is the place for you! This position will work a 9/80 schedule, with every other Friday off. Your mission, should you choose to accept: Be an integral contributor in creation of advanced launch vehicle aerodynamic designs. Lead a small team in support of launch vehicle design through all phases from conceptual and preliminary aerodynamic design analyses to integration and test activities. Perform aerodynamic configuration trade studies on mission performance that includes effects of static and dynamic S&C, propulsion, and mass properties. Develop aerodynamic models for use in 6 degree of freedom launch vehicle simulation models (table generation with logical dependencies, uncertainty analyses, V&V techniques). Design and support wind tunnel testing programs. Present work and technical findings to management and senior leadership through design reviews and program milestones (proposal efforts, technical reports, and formal customer presentations). Prepare man-level staffing requirements to support development of a rocket vehicle design from concept to flight. Manage tasks and schedule to ensure smooth coordination with program and other leads. Manage a small team with ability to assign/monitor work and review for accuracy. Other duties as assigned Skills for Success: Experience with a wide range of flight regimes (subsonic, transonic, supersonic, hypersonic, and rarefied flows). Familiarity with legacy aerodynamic computer analysis programs (CFD and industry predictive codes - Fluent, DSMC, Loci-Chem, Fun3D, Cart3D, Missile Datcom). Familiarity with wind tunnel testing and evaluation (transonic and supersonic). Familiarity with launch vehicle aeroelastic analyses (distributed loads, deflected vehicle effects). Familiarity with launch vehicle venting analysis requirements and engineering methodologies. If this job description reads like it was written specifically for you, consider joining our team! This position is contingent upon the candidate obtaining final clearances and program access(es) within a reasonable period of time as determined by the company. Basic Qualifications: Bachelor's degree with 5 years of professional experience - OR - Master's degree with 3 years of professional experience - OR - PhD with 1 year of professional experience. Will consider an additional 4+ years of experience in lieu of degree. Must have the ability to obtain and maintain a U.S. Government DoD Secret security clearance Bachelor's or Master's Degree in Aerospace, Mechanical, or Electrical Engineering Experience with 6DOF aerodynamic model development Experience with Python and the Linux operating system Preferred Qualifications: Experience with autopilot and guidance algorithm design and navigation and actuator subsystems Experience with wind tunnel test planning and execution Experience with CFD Experience with C++ Curious about all the exciting developments with the Northrop Grumman Space Sector? Click the link below: ************************************* Working at Northrop Grumman is more than just a paycheck. We offer a comprehensive Total Rewards and benefits package designed to help you thrive at work and in life. For more information on our Total Rewards package, please visit our Total Rewards site. Northrop Grumman Total Rewards Primary Level Salary Range: $95,300.00 - $142,900.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
$95.3k-142.9k yearly Auto-Apply 20d ago
Civil/Structural Design Drafter
Zemlock
Design engineer job in Tempe, AZ
Job Brief: The Civil/Structural Design Drafter will focus on power plant and general design, including but not limited to structural steel terminology, structural steel layouts, platforms, stairs, roof framing, steel bracing, knowledge of how to use and utilize the AISC Structural book, which identifies the structural member's dimensions, and weights, etc. The individual will partner with various structural/civil team members and, from those conversations, site visits, and sketches, will develop the design and detailed structural drawings as mentioned above. The individual will also know the concrete layout and terminology, along with rebar layout detail, floor/slab, foundation drawing layout, and details presentation. Job Responsibilities: Designs or assists with design and application of generating facilities in the structural and civil arena. May be involved with project evaluations, surveys, investigations, studies, estimates, drawings, sketches, work order requests, material requests, notice to proceed project documents. Provides design package consisting of structural/civil drawings, from own notes, field visits, or engineer's concepts. Ability to develop connection, bracing detail for steel structures. Ability to layout concrete structures including details of concrete reinforcement. Typical concrete design drawings would be of slabs and equipment foundations and pads per engineer's calculations and/or sketches. Ability to work with other team engineers and designers in the various disciplines of the organization. As a plus, knowledge of power generation processes and plant equipment. Assists in the documentation of division design standards and procedures. May be required to contact outside agencies such as manufactures and vendors relating to project specifics. Must be proficient with the latest version of Bentley Systems Connect. MicroStation Connect. Requires out of town travel to generating site. Will work with Structural Engineer to create new drawings from field note(s)/sketches or from conceptual ideas. A knowledge of structural members, shapes and detailing is a must. Education: Degree is not required , not a civil engineer, no civil experience required, only structural Designer can be a paraprofessional , 2 year AA, designer drafter 6+ years of experience preferred Needs to have structural experience Will be driving, and Smith test is required, will be travelling to different locations throughout the week Requirements Education: Degree is not required , not a civil engineer, no civil experience required, only structural Designer can be a paraprofessional , 2 year AA, designer drafter 6+ years of experience preferred Needs to have structural experience Will be driving, and Smith test is required, will be travelling to different locations throughout the week Provides design package consisting of structural/civil drawings, from own notes, field visits, or engineer's concepts. Ability to develop connection, bracing detail for steel structures. Ability to layout concrete structures including details of concrete reinforcement. Typical concrete design drawings would be of slabs and equipment foundations and pads per engineer's calculations and/or sketches. Ability to work with other team engineers and designers in the various disciplines of the organization. As a plus, knowledge of power generation processes and plant equipment. Assists in the documentation of division design standards and procedures. May be required to contact outside agencies such as manufactures and vendors relating to project specifics. Must be proficient with the latest version of Bentley Systems Connect. MicroStation Connect. Requires out of town travel to generating site. Benefits Job Types: Full-time, Contract, Temp-to-hire Pay: Up to $44.00 per hour
$44 hourly Auto-Apply 60d+ ago
Research Engineering Designer/Drafting II
University of Arizona 4.5
Design engineer job in Tucson, AZ
Research Engineering Designer/Drafting II Posting Number req24169 Department Steward Observatory Department Website Link Astronomy & Steward Observatory Location Main Campus Address Tucson, AZ USA Position Highlights The University of Arizona's Department of Steward Observatory invites you to apply to the role of Research Engineering Designer/Drafter II. The Research Engineering Designer/Drafter II will apply known mechanical design and drafting theories and principles. They will be responsible for designing, detailing, and building mechanical systems that support research in ground-based and space-based astronomy. This includes designing, drawing, fabricating and implementing mechanical hardware to accomplish the goals of the principal investigator and their program. The Research Engineering Designer/Drafter II will have an understanding of Geometric Dimensioning and Tolerancing, AutoCAD, Autodesk Inventor, and SolidWorks. This knowledge is required to support all projects at the University of Arizona. Outstanding U of A benefits include health, dental, and vision insurance plans; life insurance and disability programs; paid vacation, sick leave, and holidays; U of A/ASU/NAU tuition reduction for the employee and qualified family members; retirement plans; access to U of A recreation and cultural activities; and more! The University of Arizona has been recognized for our innovative work-life programs. For more information about working at the University of Arizona and relocations services, please click here. Duties & Responsibilities * This position develops and prepares project designs in the form of drawing sketches, preliminary and final manufacturing drawings, architectural plans, diagrams, schematics and/or large drawing layouts. These are used in ground-based and space-based instruments, telescopes, facilities and utilities, or in the fabrication, assembly, installation, modification, or repair of electronic, electrical, and/or mechanical equipment, components and systems. * Work is performed under supervision, and instructions are provided to prepare detailed drawings and design work. Works to tighter specifications, such as military specifications, where accuracy and precision are a requisite. * Prepares preliminary 3D models, drawings, and/or plans from initial project review meetings. This requires coordinating directly with engineers and project managers to understand project requirements, while working out details such as design and drafting time required, strength and cost of material, and amount of materials required for their portion of the project. The Research Engineering Designer/Drafter II then presents this information to the engineer and/or project manager for approval and/or modifications. * Performs field investigations, when applicable, of work site, to verify scope of project requirements and to perform on site measurements of the site itself, and/or existing parts, assemblies, or equipment that need to be repaired or modified. * Assists in ongoing projects to standardize and unify design documentation standards by participating in meetings and preparing presentation materials as necessary. This job posting reflects the general nature and level of work expected of the selected candidate(s). It is not intended to be an exhaustive list of all duties and responsibilities. The institution reserves the right to amend or update this description as organizational priorities and institutional needs evolve. Minimum Qualifications * High school diploma or high school diploma equivalency is required. * Minimum of 3 years of relevant experience, or equivalent combination of education and work experience. Preferred Qualifications FLSA Non-Exempt Full Time/Part Time Full Time Number of Hours Worked per Week 40 Job FTE 1 Work Calendar Fiscal Job Category Research Benefits Eligible Yes - Full Benefits Rate of Pay $25.50 - $31.88 Compensation Type hourly rate Grade 7 Compensation Guidance The Rate of Pay Field represents the University of Arizona's good faith and reasonable estimate of the range of possible compensation at the time of posting. The University considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, key skills, and internal equity. The Grade Range represent a full range of career compensation growth over time. The university offers compensation growth opportunities within its career architecture. To learn more about compensation, please review our Applicant Compensation Guide and our Total Rewards Calculator. Career Stream and Level OC2 Job Family Research Engineering Job Function Research Type of criminal background check required: Name-based criminal background check (non-security sensitive) Number of Vacancies 1 Target Hire Date 11/10/2025 Expected End Date Contact Information for Candidates Arturo Fern ***************** Open Date 10/13/2025 Open Until Filled Yes Documents Needed to Apply Resume and Cover Letter Special Instructions to Applicant Notice of Availability of the Annual Security and Fire Safety Report In compliance with the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act (Clery Act), each year the University of Arizona releases an Annual Security Report (ASR) for each of the University's campuses. These reports disclose information including Clery crime statistics for the previous three calendar years and policies, procedures, and programs the University uses to keep students and employees safe, including how to report crimes or other emergencies and resources for crime victims. As a campus with residential housing facilities, the Main Campus ASR also includes a combined Annual Fire Safety report with information on fire statistics and fire safety systems, policies, and procedures. Paper copies of the Reports can be obtained by contacting the University Compliance Office at ********************.
$25.5-31.9 hourly Easy Apply 60d+ ago
AD&D Aerospace Engineer Senior
Cirrus Design Corporation 4.3
Design engineer job in Phoenix, AZ
Define the future of aviation. Join Cirrus Aircraft's team to build the greatest transformation in aviation since the jet engine. certifiable flight technologies to bring simple and safe personal flight to the masses. The Advanced Development Group is a small and nimble team that researches, designs, and tests concepts using rapid, unconstrained set-based design methodologies. The scope of our projects ranges from feature development to end-to-end systems and proof of concept aircraft, spearheading the next products. Look no further, the future of aviation is here. Join our innovative company today. Duties and Responsibilities/Essential Functions Conduct on-aircraft system integration and validation testing. Performs fluid dynamics, aircraft performance, and stability and control. Research, implement, and evaluate software algorithms. Must be able to independently design and execute bench, ground, and flight tests, and analyze and present results. Design, execute, and present trade studies pertaining to data, software, and network architecture. Contribute towards overall architecture and strategy for the advanced flight systems. Collaboration with electrical and mechanical engineering to achieve fully integrated systems will be required. Experience with small multi-disciplinary teams is a plus. Qualifications To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Required Education and/or Experience: Bachelors degree in Aerospace or Mechanical Engineering required. 6-10 years' experience in a related field Proficient in a professional environment developing MATLAB / Simulink control systems Proficient in fluid dynamics, aircraft performance, and stability and control. Proficient with engineering drawings, CAD software, and engineering configuration management. Strong communication skills: Be able to concisely document and explain workflows and design choices. Maintain clear documentation and collaborate with cross-functional teams to align data engineering tasks with broader project goals. Comfortable in driving results under uncertainty during the earlier stages of development Ability to work independently as well as part of a high functioning team Distinguishing Education and/or Experience: Advanced degree in Aerospace or Electrical Engineering. Experience generating system and simulation models. Experience troubleshooting and implementing solutions for aerodynamic challenges such as drag, cooling, stability and control, and slow speed handling. Experience with developmental flight testing. Experience with physics-based 6DOF simulations. Experience with configuration and layout of new aircraft. Development/operations of hardware-in-the-loop simulators, conducting testing and troubleshooting of HW/SW interfaces Exposure to Part 23 and/or Part 25 federal regulations. Competencies To perform the job successfully, an individual should demonstrate the following competencies: Directs Work: Provides direction, delegates, and removes obstacles to get work done. Situational Adaptability: Adapts approach and demeanor in real time to match shifting demands of different situations. Manages Complexity: Makes sense of complex, high quantity, and sometimes, contradictory information to effectively solve problems. Communicates Effectively: Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences. Our Benefits: Cirrus provides a range of exciting benefits, including: 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting. Employer-Paid Coverages: Group term life, short- and long-term disability insurance. Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options. Free Health Tracking: With rewards for meeting health goals. Generous PTO: 160 hours accrued within the first year. Employee Referral Bonus: For referring talented candidates. Career Development: Tuition reimbursement and professional growth opportunities. Exclusive Discounts: Access to partner and marketplace discounts. Community & Engagement: Company and employee clubs at various locations. These benefits are designed to support your well-being, growth, and enjoyment at Cirrus! Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week may be required. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.
$125k-164k yearly est. 5d ago
Design Drafter I (DESIG005818)
RBC 4.9
Design engineer job in Tucson, AZ
Design Drafter I With continual growth comes opportunity and Sargent has an immediate opening for a Design Drafter I. The Design Drafter responsible for completing modeling and drawing tasks for creating engineering documentation in support of design, manufacturing and testing of seal and ducting products within the Engineering department. This role will collaborate with the Project Engineers to complete assigned tasks. Conducts reviews of release package documentation prior to release into Sargent systems. Responsibilities Ensure safety is the foundation of daily work through vigilance and accountability. Generate 3D part and assembly models from legacy drawings or Engineer/Manager direction Prepare part and assembly drawings following Sargent Airtomic CAD Directives Apply Geometric Dimensioning & Tolerancing (GD&T) to define design requirements for manufacturing and inspection as directed by the Engineer Implement requested changes to CAD models/drawings Adhere to Sargent Airtomic CAD Directives when creating part or assembly models and drawings Perform review of revision package for accuracy, completeness, clarity and formatting Check 3D part and assembly models for compliance to drawings and Sargent Airtomic CAD Directives Complete all required Windchill tasks associated with creating, changing, and/or releasing documents Read and interpret Engineering drawings to generate 3D models Manage assigned workload based on due dates Must be able to work as part of a team to complete assigned tasks This role involves occasional travel, estimated at less than 10% annually. Minimum Qualifications Education: Associate of Applied Science (AAS) degree in CAD OR Associate degree in related field plus 1 years of experience OR High School diploma or GED plus 3 years of related experience Demonstrated CAD modeling ability Basic understanding of ASME Y14.5 Geometric Dimensioning & Tolerancing (GD&T) Experience with Microsoft Office suite software Mechanical aptitude displayed through personal hobbies/projects Must be a U.S. Citizen Preferred Qualifications Experience with Solidworks and Windchill software Familiarity with machining, metal forming, and manufacturing practices Familiarity with detail part inspection practices Application of dimensions and GD&T for precision components Join the Sargent Legacy in Securing our Future Founded in 1919, RBC Bearings (Nasdaq: ROLL) has a long, successful history of quality craftsmanship and innovation in highly technical bearing products that require sophisticated design solutions and manufacturing capabilities for Industrial, Aerospace and Defense applications around the world. In 2015, RBC acquired Sargent Aerospace and Defense. Founded in 1920, Sargent Aerospace & Defense leverages 100 years of expertise as a premier global supplier of precision engineered customized components that directly contributes to the safe operation of countless commercial and military aircraft, rotorcraft, submarines and land based vehicles. At Sargent, our mission is to secure our future by making the challenging a reality. We achieve this by delivering high quality products and services that meet customer requirements and exceed customer expectations through employee development, customer focus and continual improvement. Sargent's continuing investment in people, assets, technology, and process quality ensures excellence and is integral to the company's commitment to customers and their end-users. As we grow, we will continue to root our culture through our core values of Integrity, Respects & Values People, Customer Focus, Teamwork, Results Focus and Continual Improvement. Company Benefits Include: Competitive Compensation Bonus platforms Holidays/Vacation/Sick Time 401k Savings & Investment Plan Tuition Reimbursement Medical/Dental/Vision Plans HSA/FSA Life & Disability Insurance Accident/Hospital/Critical Care Plans Pet Insurance Gym & Rideshare Incentives Legal Insurance/Identity Theft Flexible Schedules 3 & 4-day work week ½ day Fridays Dedication to our core values. Our must haves… Integrity We do the right thing the right way. Our ideal candidate is ethical, honest in all interactions, delivers good news and bad, and follows through on commitments. Key Skills & Abilities: is fair, credible, confidential, fiscally responsible and accountable for decisions and actions. Respects and Values People. - We encourage and bring out the potential of others. Our ideal candidate embraces diversity, recognizes and supports the accomplishments, talents and development of others. Key Skills & Abilities: is committed to the building of strong relationships and creates an environment of trust and mutual respect. Customer Focus - We act with excellence in each and every interaction. Our ideal candidate builds strong internal/external customer relationships, and goes above and beyond to deliver high quality products and services on time, every time. Key Skills & Abilities: is responsive with strong customer service skills, product and job knowledge to provide excellent customer satisfaction. Teamwork - We are better together. Our ideal candidate is inclusive, engaged and collaborative, sharing information, ideas and experiences to accomplish goals, improve decision making and leverage capabilities. Key Skills & Abilities: is a dependable team player, demonstrated through attendance and punctuality, works well with others and has strong communication skills (both oral & written) to keep all stakeholders informed. Results Focus - We focus on the outcome, not the obstacle. Our ideal candidate must have a strong work ethic with a results/performance driven track record in a fast paced, changing and challenging environment. Key Skills & Abilities: is adaptable, works with a sense of urgency and high level of initiative and demonstrates a commitment to quality with attention to detail. Continual Improvement - We encourage and drive innovation. Our ideal candidate must be naturally curious, passionate and never satisfied with the status quo. Key Skills & Abilities: is innovative and has a problem solving mindset that provides and implements CI ideas.
$42k-57k yearly est. 11d ago
Applications Design Engineer - Senior
MacOm 4.5
Design engineer job in Mesa, AZ
MACOM designs and manufactures semiconductor products for Data Center, Telecommunication and Industrial and Defense applications. Headquartered in Lowell, Massachusetts, MACOM has design centers and sales offices throughout North America, Europe and Asia. MACOM is certified to the ISO9001 international quality standard and ISO14001 environmental management standard. MACOM has more than 75 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operational facilities throughout North America, Europe, and Asia. Click here to view our facilities. In addition, MACOM offers foundry services that represent a key core competency within our business. MACOM sells and distributes products globally via a sales channel comprised of a direct field sales force, authorized sales representatives and leading industry distributors. Our sales team is trained across all of our products to give our customers insights into our entire portfolio. Applications Design Engineer-Principal Job Description: * Provide technical support to key customers in base station/ broadcasting/ Microwave RF Power areas both OEM accounts and distribution channel. * Design and optimize high performance RF Power amplifier device/turnkey solution, help to debug and fine tuning customers' design inside lab to meet customer expectation. * Design and optimize high performance RF Power amplifier demo board/turnkey solution, help to debug and fine tuning customers' design inside lab to meet customer expectation. * Work with device design team to design or optimize evaluation circuit to initiate meaningful design-in opportunity in key customers or verify the feasibility on innovation concept. * Manage the account on technical interface. Build and maintain relationships with development crews at customer sites. * Help on product quality complaint description and quality report explanation from tech. point of view. * Technically drive marketing activities, including seminar/exhibition/conference, collect market feedback and give suggestions to Product Line on NPD. * Manage lab facilities like DPD system/Loadpull system etc. Qualifications: * Bachelor/master's degree in electronic engineering with the focus on RF. * 5+ years experiences in RF design or applications, experience in high power amplifier is preferred. * Expert in RF laboratory equipment and measurement techniques. * Expert on the design of high-power RF circuits for Power Amplifier applications. * Highly knowledgeable on modelling techniques for non-linear systems, familiar with simulation tool like ADS/Microwave office/Momentum. * Highly knowledgeable on the physics of device operation. * Good understanding of RF circuit techniques for performance enhancements such as digital pre-distortion and Doherty. * Excellent problem-solving skills. * Have a proactive, implementation-focused approach. * Excellent verbal, written and presentation skills. Due to ITAR regulations, only candidates who are U.S. Persons (U.S. citizens, U.S. nationals, lawful permanent residents, or individuals granted asylum or refugee status) will be considered for this position. This position is eligible to receive restricted stock unit (RSU) awards and cash bonuses, solely at MACOM's discretion, subject to individual and company performance. EEO: MACOM is an Equal Opportunity Employer committed to a diverse workforce. MACOM will not discriminate against any worker or job applicant on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, genetic information, veteran status, military service, marital status, or any other category protected under applicable law. Reasonable Accommodation: MACOM is committed to working with and providing reasonable accommodations to qualified individuals with physical and mental disabilities. If you have a disability and are in need of a reasonable accommodation with respect to any part of the application process please call *************** or email HR_*************. Provide your name, phone number and the position title and location in which you are interested, and nature of accommodation needed, and we will get back to you. We also work with current employees who request or need reasonable accommodation in order to perform the essential functions of their jobs. Benefits: This position offers a comprehensive benefits package including but not limited to: * Health, dental, and vision insurance. * Employer-sponsored 401(k) plan. * Paid time off. * Professional development opportunities.
$83k-112k yearly est. 18d ago
Design Drafter
Advastar, Inc.
Design engineer job in Phoenix, AZ
Job Description DIRECT HIRE | DESIGN DRAFTER | Phoenix, AZ Seeking a talented and detail-oriented Design Drafter with experience in structural/architectural drafting/design. Exciting opportunity to join a growing business (locations nationwide) and have access to new technologies as they pursue integrating AI technologies and advanced rendering software (fly-bys, walk-throughs, photographic-level renderings, etc.). You'll create custom building designs, photorealistic renderings, proposals, marketing collateral, and social media assets on fast-track schedules - directly impacting projects coast-to-coast while growing your skills in a collaborative, high-energy environment. Key Skills (do not have to have all): CAD, REVIT, Bluebeam, BIM, 3D Modeling, Rendering, Construction Materials, etc. **Experience with 3D renderings would be a big plus** Anticipate $50K-$70K, dependent on experience Full suite of benefits Seeking experience with Architectural and/or Structural Design/Drafting related to commercial builds Office-based role, M-F Responsibilities: Design and Drafting: Develop detailed drawings and plans for commercial buildings using AutoCAD. Collaboration: Partner with engineers, architects, and project managers to create comprehensive design solutions tailored to construction methods. Plan Review: Interpret and review project specifications, blueprints, and other technical documents specific to design. Compliance: Ensure all designs meet relevant building codes, standards, and regulations. Revisions: Update and revise drawings based on feedback from stakeholders and evolving project requirements. Documentation: Keep accurate records of all drawings, revisions, and project documentation. Requirements: Prefer Design/Drafting related degree/certifications 2+ years of experience in structural or architectural drafting/design for commercial buildings Proficiency in AutoCAD (3D), REVIT + Illustrator, SketchUp, Bluebeam, or Adobe InDesign Strong understanding of construction methods, materials, and building codes. Exceptional precision and attention to detail in drafting and design work. Excellent verbal and written communication skills. Ability to identify issues and develop effective solutions. Ability to collaborate effectively within a multidisciplinary team environment. Portfolio of design or drafting work required Keywords: Revit Designer, Architectural Renderer, 3D Visualization Specialist, Construction Graphics Designer, SketchUp Renderer, Prefab Design, Building Proposal Designer, Revit + Illustrator EEO
$50k-70k yearly 28d ago
Design Drafter
Advastar
Design engineer job in Phoenix, AZ
DIRECT HIRE | DESIGN DRAFTER | Phoenix, AZ Seeking a talented and detail-oriented Design Drafter with experience in structural/architectural drafting/design. Exciting opportunity to join a growing business (locations nationwide) and have access to new technologies as they pursue integrating AI technologies and advanced rendering software (fly-bys, walk-throughs, photographic-level renderings, etc.). You'll create custom building designs, photorealistic renderings, proposals, marketing collateral, and social media assets on fast-track schedules - directly impacting projects coast-to-coast while growing your skills in a collaborative, high-energy environment. Key Skills (do not have to have all): CAD, REVIT, Bluebeam, BIM, 3D Modeling, Rendering, Construction Materials, etc. **Experience with 3D renderings would be a big plus** Anticipate $50K-$70K, dependent on experience Full suite of benefits Seeking experience with Architectural and/or Structural Design/Drafting related to commercial builds Office-based role, M-F Responsibilities: Design and Drafting: Develop detailed drawings and plans for commercial buildings using AutoCAD. Collaboration: Partner with engineers, architects, and project managers to create comprehensive design solutions tailored to construction methods. Plan Review: Interpret and review project specifications, blueprints, and other technical documents specific to design. Compliance: Ensure all designs meet relevant building codes, standards, and regulations. Revisions: Update and revise drawings based on feedback from stakeholders and evolving project requirements. Documentation: Keep accurate records of all drawings, revisions, and project documentation. Requirements: Prefer Design/Drafting related degree/certifications 2+ years of experience in structural or architectural drafting/design for commercial buildings Proficiency in AutoCAD (3D), REVIT + Illustrator, SketchUp, Bluebeam, or Adobe InDesign Strong understanding of construction methods, materials, and building codes. Exceptional precision and attention to detail in drafting and design work. Excellent verbal and written communication skills. Ability to identify issues and develop effective solutions. Ability to collaborate effectively within a multidisciplinary team environment. Portfolio of design or drafting work required Keywords: Revit Designer, Architectural Renderer, 3D Visualization Specialist, Construction Graphics Designer, SketchUp Renderer, Prefab Design, Building Proposal Designer, Revit + Illustrator EEO
$50k-70k yearly 26d ago
Manufacturing Engineer
JBL Resources 4.3
Design engineer job in Chandler, AZ
About Our Client: Accepting no less than the absolute best, our client has climbed to the top, gaining a reputation for both excellence and satisfaction. Working at this company will give you the opportunity to work with some of the top technical professionals in the industry who are bringing cutting-edge products to forefront. Offering results-driven people a place where they can truly make a difference on a daily basis, this is an opportunity you will not want to miss! Key Responsibilities: Providing engineering support to a manufacturing process, project or function. Evaluating manufacturing outcomes. Implementing continuous improvements and cost efficiencies. Supporting NPI and new equipment/process introductions. Directly supporting yield sustainment. Working on production lines that have been a part of a manufacturing transfer. Overseeing sending site processes between two different locations. Disassembling and cleaning tasks will be in one facility. Assembling, functional testing, and packaging will be at another facility. Qualifications: Bachelor's degree in Engineering (Preferably Mechanical or Electrical). 1-3 years of experience in manufacturing or process engineering, preferably in the medical device or regulated industry. Proficiency in CAD software and statistical process control (SPC) tools. Ability to troubleshoot simple electrical and mechanical systems. Proven ability to identify yield issues, trace them to their source, and implement sustainable countermeasures. Strong analytical, problem-solving, and project management skills. Knowledge of lean manufacturing and Six Sigma methodologies is a plus. Excellent communication and teamwork skills. NO C2C CANDIDATES Interested Candidates please apply on our website at https://jobs.jblresources.com. For more information about our services and great opportunities at JBL Resources, please visit our website: https://www.jblresources.com. JBL Resources is proud to have earned the reputation of being a premier provider of top talent professionals in the fields of engineering, human resources, logistics, operations, and supply chain management. As specialists in both permanent placement and contract services, our mission is to help companies and individuals become all they were created to be. **JBL is an Equal Opportunity Employer and E-Verify Company
$73k-96k yearly est. 5d ago
Civil Engineering Internship- Site Design
Olsson 4.7
Design engineer job in Phoenix, AZ
We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities, and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us - and will continue to allow us - to grow. The result? Inspired people, amazing designs, and projects with purpose. Job Description Our Site Design team provides design services for retail, commercial, mixed-use, and residential land development projects, along with industrial, sports, schools, and other site development types. As a civil engineering student intern, you will perform meaningful, hands-on, real-world work that will transform your classroom experience and help you envision your future career. You'll be part of our team, working for our clients on projects with our most experienced engineers. You'll assist with creating construction plans for sites that can include site layout, grading, stormwater, and utilities in AutoCAD and Civil 3D. You may also perform research, write technical reports, and travel to job sites. Qualifications You are passionate about: Working collaboratively with others. Having ownership in the work you do. Using your talents to positively affect communities. You bring to the team: Strong communication skills. Ability to contribute and work well on a team. Proficiency in Microsoft Excel, Word, and Outlook. Problem-solving and decision-making skills. Strong attention to detail. Working knowledge of AutoCAD (Civil 3D is a plus). Pursuing a degree in civil engineering. #LI-DNI Additional Information Olsson is a nationally recognized, employee-owned firm specializing in planning and design, engineering, field services, environmental, and technology. Founded in 1956 on the very mindset that drives us today, we're here to improve communities by making them more sustainable, better connected, and more efficient. Simply put, we work to leave the world better than we found it. As an Olsson employee, you'll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you'll: Become an owner in the company after your first year through our Employee Stock Ownership Plan (ESOP) Engage in work that has a positive impact on communities Receive an excellent 401(k) match Participate in a wellness program promoting balanced lifestyles Benefit from a bonus system that rewards performance Have the possibility for flexible work arrangements Please note: The benefits listed above apply to full-time employees. If you're applying for an internship, you can learn more about internship-specific offerings and experiences at Olsson by visiting *********************************** Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the “CCPA”), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.
$61k-77k yearly est. Auto-Apply 60d+ ago
Designer Drafter - Site
Enercon 4.5
Design engineer job in Tonopah, AZ
Become a part of ENERCON as a Designer/Drafter. Our Designers/Drafters are an integral part of our design team. They are the visionaries who bring engineering ideas to life, crafting detailed plans that drive the successful execution of infrastructure and energy projects. These site positions can sit out of the following locations: Tonopah, AZ Oak Harbor, OH Cleveland, OH If you are ready to join a dynamic team dedicated to making a meaningful impact, we encourage you to read more about this exciting opportunity. Responsibilities Drafters & Designers play a key role in supporting engineering teams by creating detailed technical drawings and layouts used for infrastructure and energy projects. A typical day in this role involves working closely with engineers and translating design concepts and project specifications into precise, scaled drawings that help guide the construction and implementation process. Exciting Challenges: Dive into a world of cutting-edge projects that challenge your skills and expand your horizons Innovative Environment: Work in an atmosphere that nurtures creativity, encourages out-of-the-box thinking, and supports your professional development Collaborative Culture: Join a team of experts who collaborate, inspire, and empower each other to achieve remarkable results Growth Opportunities: Embark on a rewarding career path with opportunities for growth and advancement Contribute Meaningfully: Be part of a company that values your ideas, expertise, and dedication to making a difference #LI-SH7 Qualifications This position covers a range of internal levels. Minimum qualifications for the position are shown below: Associate's Degree with an emphasis in drafting & design or related field Proficient experience with MicroStation design software Ability to learn and effectively utilize new design software programs as required Minimum of 2 years of experience in drafting with MicroStation 3-4 years of drafting & design experience is preferred Ability to utilize both 2D and 3D applications to prepare engineering drawings Understand and follow all organizational, area/departmental, and client procedures, safety policies, and directives Experience conducting self-checks of created drawings, sketches, and related data to proactively identify factors that may negatively affect final product Ability to work independently of engineers but confer with engineers and other designers for design concept interpretation Proficiency with Microsoft Office Suite Excellent written and verbal communication skills Ability to work collaboratively with others (Engineers, Designers, Project Managers) in a multi-disciplined project team environment to resolve design and drawing issues as appropriate and to accomplish objectives Strong organizational skills and attention to detail Experience working in the Nuclear, Utilities, or Power Industry is a plus Additional Information About ENERCON: At Enercon Services, Inc. (ENERCON), we're driven by our people-and we're proud to offer rewarding careers in a culture of excellence. We provide a comprehensive benefits package and professional development opportunities that support your long-term growth. What We Offer: Enjoy full benefits for you and your dependents starting day one, no waiting period Flexible work arrangements, including hybrid and alternative schedules 401(k) with employer matching Tuition reimbursement Professional Engineer (PE) license support and incentives Want to see the full picture? Click HERE to see our Comprehensive Benefits Salary Range Information: If a salary range is listed, it reflects the typical range for this full-time position based on the role, level, and location. Individual compensation within the range will be determined by factors such as work location, relevant experience, job-related skills, and education or training. Eligibility to Work: Candidates must be legally eligible to work in the US without requiring current or future sponsorship. Ability to pass a pre-employment and random drug and alcohol screenings, ENERCON and client specific background checks, and annual motor vehicle record (MVR) according to company and client policies. Equal Opportunity Employer: ENERCON does not discriminate in employment opportunities or practices based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. Connect with Us: *************** | LinkedIn
$43k-58k yearly est. Auto-Apply 13d ago