Substation Physical Design - Designer/Engineer (Birmingham, AL) multiple positions _Southern Company Services Technical Shared Services - Substation Engineering_ _Openings located in Birmingham, AL_ _PLEASE NOTE:_ This posting is to fill multiple Physical Designer/Engineer positions within our Substation Physical Design group. The Designer/Engineer can be filled as an exempt level 3-6, based on background experience and education of the successful candidate.
WORK LOCATION, SCHEDULE, & TRAVEL
+ This position will be based out of _Birmingham, AL,_ however candidates living outside of the area may be considered with the expectation that they could successfully telework and be physically present in-office (The Energy Center) and/or field location on a routine (see below) and as-needed basis.
+ Hybrid work schedule (both in-office and telecommute); currently four (4) days in-office/in-the-field and one (1) day telecommute (subject to future adjustment)
+ Relocation assistance may be provided if the successful candidate does not currently live within a reasonable commute distance.
+ This position will require some travel (day and overnight, up to 25%) and the ability to work successfully in a remote/virtual environment with access to internet service.
JOB SUMMARY
This position is responsible for the design of Southern Company's Transmission and Distribution Substations. The Designer/Engineer will produce engineering drawings, specifications, and material requirements for substation projects with emphasis on safety, quality, scheduling, and costs.
JOB QUALIFICATIONS
_Education:_
+ Bachelor's Degree in Electrical, Mechanical, or Civil Engineering (Engineer)
+ Bachelor's Degree in Engineering Technology (Designer)
+ Associate Degree with minimum 3 years relevant industry experience (Designer)
+ No Degree with minimum 5 years relevant industry experience (Designer)
_Experience:_
+ Strong understanding of substation equipment is preferred.
+ Southern Company design experience preferred.
+ Ability to create Substation Physical Design drawings from a single line diagram is preferred.
+ Strong understanding of the Institute of Electrical and Electronics Engineers Standards, National Electric Safety Code, National Electric Code, and OSHA safe operating practices are preferred.
+ AutoCAD training, experience, or certification is required.
+ Experience using 3D modeling software (SDS Inventor, Autodesk Inventor, Autodesk 3D or P4A) is preferred.
+ Experience in Transmission &/or Distribution Substation Operations for an electric power utility company is preferred.
+ Experience in the field of Substation Engineering, Field Services, Switchboard Wiring, Power Delivery, Substation Maintenance, or Substation Construction is preferred.
+ Experience working with document management & estimating systems such as Transmission Estimating and Management System (TEAMS), STOMP, MAXIMO, SCST Vault is preferred.
+ Experience providing Quality Assurance reviews for design packages is a plus.
+ Proficiency using Microsoft Office products is required.
MAJOR JOB RESPONSIBILITIES INCLUDE:
+ Prepare high quality design packages needed to construct (new or modify existing) substations using CAD-based tools based on Southern Company design standards.
+ Design the physical aspects of substations, including but not limited to, Foundation Layouts, Grounding Layouts, Conduit Layouts, Control House Layouts, Section Drawings, Electrical Bus Design, etc. Specify, order, and provide approval drawings for non-stock materials, as well as inventorying stock materials and shop fabricated materials for substation design packages. Transmit drawing packages and supporting specifications into SCST Vault using the Physical Substation Transmittal Packages Manual.
+ Make SAFETY our number one priority using a "Safety First" mentality and leading by example.
+ Coordinate and communicate with other design disciplines associated with the Substation Physical Design project.
+ Provide Quality Assurance reviews as required, technical training and provide developmental feedback to internal designer/engineers
+ Interact with manufacturers, vendors, and Southern Company committee members to resolve equipment and material issues.
+ Provide support to Substation Construction, Field Services, Project Management and Substation Maintenance.
+ Perform site visits for projects, including pre-construction meetings, during construction and post-construction. Some overnight travel will be required.
+ Participate in substation design review meetings.
+ Support Southern Company's design criteria and standardization effort.
+ Handling multiple tasks simultaneously, setting priorities, and using effective time management and organizational skills to achieve project team goals.
+ Serve as part of a storm restoration team when requested after storm events, predominately, but not limited to the Southern Company service territory.
ADDITIONAL QUALIFICATIONS
_Knowledge, Skills & Abilities_
+ Must demonstrate excellent communication skills (oral & written) and the ability to communicate technical issues simply.
+ Must be a self-starter and exhibit strong problem-solving skills.
+ Must work well in a team environment and have the ability to develop and build relationships at all levels.
+ Must possess effective time management and organizational skills sufficient to manage multiple projects with various priorities and competing deadlines.
+ Must demonstrate a customer focus with a willingness to meet the needs of our customers and solicit feedback.
+ Ability to be an effective mentor to others and teach job-related skills.
+ Good understanding of utility electric grid operations is preferred.
+ Knowledge of basic electrical power system theory is preferred.
_Behavioral Attributes:_
+ Model Our Values : _Safety First, Intentional Inclusion, Act with Integrity, and Superior Performance._
+ Conduct all activities with a focus on providing value to our customers.
+ Take personal responsibility for their projects and customer issues.
+ Follow through on all aspects of assignments to ensure a quality product and increased value is delivered to our customers.
+ Exhibit and promote a positive, "can do" attitude.
+ Commitment as a team member to building and maintaining an Inclusive work environment.
+ Must place strong emphasis on Operational Excellence (mistake free designs).
+ Must understand and practice Human Performance Concepts.
BENEFITS
+ Competitive Pay
+ Flex Schedule
+ Excellent benefits packages which includes:
+ Medical and dental coverage
+ Defined Pension/Cash Balance Benefit Plan
+ Performance-sharing plan
+ 401(k) plan with a generous company match
+ Bonus opportunities
+ Tuition Reimbursement
_*Please submit an updated resume with your application*_
About Southern Company
Southern Company (NYSE: SO ) is a leading energy provider serving 9 million customers across the Southeast and beyond through its family of companies. Providing clean, safe, reliable and affordable energy with excellent service is our mission. The company has electric operating companies in three states, natural gas distribution companies in four states, a competitive generation company, a leading distributed energy solutions provider with national capabilities, a fiber optics network and telecommunications services. Through an industry-leading commitment to innovation, resilience and sustainability, we are taking action to meet customers' and communities' needs while advancing our goal of net-zero greenhouse gas emissions by 2050. Our uncompromising values ensure we put the needs of those we serve at the center of everything we do and are the key to our sustained success. We are transforming energy into economic, environmental and social progress for tomorrow. Our corporate culture has been recognized by a variety of organizations, earning the company awards and recognitions that reflect Our Values and dedication to service. To learn more, visit *********************** .
Southern Company invests in the well-being of its employees and their families through a comprehensive total rewards strategy that includes competitive base salary, annual incentive awards for eligible employees and health, welfare and retirement benefits designed to support physical, financial, and emotional/social well-being. This position may also be eligible for additional compensation, such as an incentive program, with the amount of any bonus/awards subject to the terms and conditions of the applicable incentive plan(s). A summary of the benefits offered for this position can be found here **************************************************** . Additional and specific details about total compensation and benefits will also be provided during the hiring process.
Southern Company is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law.
Job Identification: 16620
Job Category: Engineering
Job Schedule: Full time
Company: Southern Company Services
$68k-84k yearly est. 15d ago
Looking for a job?
Let Zippia find it for you.
Mechanical Designer II
Neptune Technology Group 4.4
Design engineer job in Tallassee, AL
The Mechanical Designer II position (CAD Designer) will support both new product development and tactical projects by creating and altering 3D solid models and associated engineering drawings while managing the Engineering Change and Release process.
Objectives:
A successful Mechanical Designer II will work in conjunction with various engineering groups to utilize computer-aided design (CAD) software to create 2D or 3D mechanical models and drawings of products, components, and related mechanical systems. They will have the ability to develop detailed models and drawings from notes, sketches, existing drawings, design concepts, verbal instructions, and/or engineering specifications. The Designer will contribute to team objectives and outcomes.
Requirements
* Responsible for creation and documentation of 3D CAD models and related drawings, Bill of Materials (BOMs) and other engineering documentation with minor supervision
* Ability to work with project engineers to develop and formulate design concepts.
* Coordinate drawing documentation in preparation for formal production releases.
* Responsible for processing change requests as a part of the Engineering Change and Release process to include the checking and auditing of other's work.
Education/Experience: Minimum 2-year Associate degree or 5+ years of relevant experience
Preferred Qualifications:
Strong MCAD ability, specifically 3D solid modelling; PTC CREO experience preferred.
Experience with PLM, Windchill preferred.
Strong interpersonal and communication skills
Ability to help mentor younger designers (and engineers) in developing new skills and abilities.
Travel Requirements: Less than 10% of the time
Location: Tallassee, AL or Duluth, GA
#HP1
$51k-66k yearly est. 8d ago
Design Engineer I
Nucor Corporation 4.7
Design engineer job in Columbus, GA
Job Details Division: Nucor Building Systems South Carolina Basic Job Functions: Aggressively maintain the design schedule to meet internal and external customer demands. With guidance from the Engineering Manager, The Design Supervisor is the primary individual responsible for the following:
Develop and implement employee training and PCIP programs as well as provide performance appraisals and recommend compensation adjustments based on performance.
Provide mentoring, coaching and accountability to the Design Group. Develop and maintain current design policies, procedures and practices.
Develop and manage realistic department staffing requirements, expenditures for supplies and equipment and wage increases for employees.
Coordinate recruiting and interviews for additions to the Design Group and make hiring recommendations.
Along with the Engineering Manager, participates in the strategic planning for the Design Group and Engineering Department to meet future anticipated needs.
Provide back-up support as situations arise for the Engineering Manager function.
Maintain control of the design programs to ensure that the correct versions are being used.
The Design Supervisor routinely works with the DesignEngineers, District Sales Managers, Customer Service Reps, Department Managers and Supervisors, General Manager and Nucor customers.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.Minimum Qualifications:
Bachelor of Science in Civil Engineering/Architectural Engineering from ABET Accredited school.
Successful completion of the Fundamentals of Engineering exam prior to hire date.
Preferred Qualifications:
An educational focus on structural engineering.
Basic knowledge of building construction.
Understanding of current building codes and standard industry practices.
Experience in the field of pre-engineered metal building systems.
Nucor is an Equal Opportunity Employer and a drug-free workplace
$60k-77k yearly est. 2d ago
Mechanical Engineering Co-Op
Steris 4.5
Design engineer job in Montgomery, AL
At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe.
As an Engineering Co-op at STERIS, you will join a collaborative team of production operators and engineers working on our innovative Surgical Solutions product lines in the Montgomery, Alabama facility. In this role, you will assist in providing day to day Engineering support to the manufacturing floor for our current product lines. You will also participate in project work that will benefit STERIS and contribute to your individual growth as a developing engineer. As a valued member of the team, you will have the opportunity to work on compelling medical device products in a clean, climate- controlled work environment and a supportive, team-based culture.
Key Program Info:
Dates: Summer 2026 (June - August)
Location: Montgomery, AL
Work Environment: Onsite
Hours: Full-time for the duration of your co-op (Monday-Thursday: 7 AM-4:30 PM and Friday: 7-11 AM)
What You'll Do as an Engineering Co-Op
Improve manufacturing processes in fabrication, machining, and/or assembly areas for assigned Value Stream
Collect and analyze data
Resolve process problems
Conduct time studies
Create and/or update documents such as AS400 BOM's, Process Specs, Standard Work, Tool Sheets, and Total Productive Maintenance Sheets
Create Special Manufacturing Requests as required
Submit Engineering Change orders to revise existing drawings, processes, and documentation as required
Follow industry codes, standards, and recommendations
Maintain a safe working environment and follow all safety procedures, including wearing personal protective equipment (safety glasses, etc., as required)
Experience, Skills, and Abilities Needed
Required:
Currently enrolled in a Bachelor of Science degree in Engineering program - Mechanical, Biomedical, Electrical, or Industrial Engineering preferred
Sophomore year requirements must be completed by program start date (January 2026)
Strong working knowledge of MS Office software (Word, Excel, Access, & Outlook)
Basic CAD skills - Solidworks preferred
Preferred:
Ability to return for multiple co-op rotations (spring, summer, and/or fall semesters)
Other:
Clear written and oral communication skills
Outstanding interpersonal skills, with the specific ability to work in teams
Pay range for this opportunity is $0.00 - $0.00.
Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc.
STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits
Open until position is filled.
STERIS is a leading global provider of products and services that support patient care with an emphasis on infection prevention. WE HELP OUR CUSTOMERS CREATE A HEALTHIER AND SAFER WORLD by providing innovative healthcare and life sciences products and services around the globe. For more information, visit *************** If you need assistance completing the application process, please call ****************. This contact information is for accommodation inquiries only and cannot be used to check application status. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity. The full affirmative action program, absent the data metrics required by § 60-741.44(k), shall be available to all employees and applicants for employment for inspection upon request. The program may be obtained at your location's HR Office during normal business hours.
$59k-71k yearly est. 40d ago
Mechanical Designer II
Neptune 4.0
Design engineer job in Tallassee, AL
The Mechanical Designer II position (CAD Designer) will support both new product development and tactical projects by creating and altering 3D solid models and associated engineering drawings while managing the Engineering Change and Release process.
Objectives:
A successful Mechanical Designer II will work in conjunction with various engineering groups to utilize computer-aided design (CAD) software to create 2D or 3D mechanical models and drawings of products, components, and related mechanical systems. They will have the ability to develop detailed models and drawings from notes, sketches, existing drawings, design concepts, verbal instructions, and/or engineering specifications. The Designer will contribute to team objectives and outcomes.
Requirements
Responsible for creation and documentation of 3D CAD models and related drawings, Bill of Materials (BOMs) and other engineering documentation with minor supervision
Ability to work with project engineers to develop and formulate design concepts.
Coordinate drawing documentation in preparation for formal production releases.
Responsible for processing change requests as a part of the Engineering Change and Release process to include the checking and auditing of other's work.
Education/Experience: Minimum 2-year Associate degree or 5+ years of relevant experience
Preferred Qualifications:
Strong MCAD ability, specifically 3D solid modelling; PTC CREO experience preferred.
Experience with PLM, Windchill preferred.
Strong interpersonal and communication skills
Ability to help mentor younger designers (and engineers) in developing new skills and abilities.
Travel Requirements: Less than 10% of the time
Location: Tallassee, AL or Duluth, GA
#HP1
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
$46k-60k yearly est. 7d ago
Design Engineer II
Integra Staffing and Search
Design engineer job in Montgomery, AL
DesignEngineer II Job Description The DesignEngineer II uses engineering techniques to design, maintain, or improve new or existing products and/or components for engineering projects within the area of assigned responsibility.
will serve our Water Heater Division, located in Montgomery, AL.
Responsibilities
Analyzes engineering sketches, specifications and related data and drawings to determine design factors such as size, shape and arrangement of parts.
Sketches rough layouts and computes angles, weights, surface areas, dimensions, radii, clearances, tolerances, leverages and location of holes.
Plan, coordinate, and check engineering changes prior to supervisory signature release to production.
Investigate and troubleshoot product design related problems and opportunities, documenting findings and performing corrective/improvement changes.
Reviews product design for compliance with engineering principles, agency standards, company standards and customer contract requirements, and related specifications.
Develop agency certification submittals and coordinate available testing with internal and external laboratories.
Develop evaluation test plans and coordinate with engineeringdesigners and lab test engineers on test set-up, data acquisition, interpretation of data and means for achieving desired test results.
Write detailed engineering reports with analysis and summary of findings that will be shared with other departments and archived for historical reference.
Investigate pertinent factors such as inter-changeability, service requirements, and efficiency and agency requirements.
Qualifications
Bachelor's Degree in Mechanical Engineering or related field
3 years of experience in design and manufacture of products
Ability to read and interpret documents such as safety rules, operating, and maintenance instructions and procedures.
Ability to work with mathematic concepts such as probability and statistical inference.
Strong reasoning and analytical skills (ability to solve practical problems and deal with a variety of concrete variable in situations)
Experience in appliance design preferred.
Experience in engineering/manufacturing change processes.
Experience in working with governing certification standards and agencies preferred.
Experience in manufacturing processes engineering and engineering computer systems including SolidWorks modeling software.
Occasional travel required.
Excellent communication skills, written and verbal, with attention to detail and accuracy.
Proficient computer skills and in-depth knowledge of relevant software such as MS Office Suite.
Demonstrated ability to work well with others in a matrix team environment.
Knowledge of concepts, techniques and tools that promote effective analysis, such as Design of Experiments and test engineering. Ability to carry out the development of information-gathering exercises for the purpose of investigating a system or process in a manufacturing environment and determine the root cause of problems. Knowledge of, and the ability to use, tools and techniques for analyzing and documenting logical relationships among data, processes or events.
Knowledge of processes, approaches, tools and techniques of product design; ability to convert customer and market requirements into product design in the manufacturing environment.
Knowledge of existing and advanced methodologies, processes, tools and techniques of product development; ability to design, build and manage the manufacture of new products.
Knowledge of effective project management strategies and tactics and ability to plan, organize, monitor, and lead projects, ensuring efficient utilization of technical and administrative resources to achieve project objectives.
Knowledge of cost improvement projects
How to Stand Out
Master's Degree in Mechanical Engineering or related field.
Knowledge of gas combustion principles.
Knowledge of heat pump design and heat exchanger optimization.
Knowledge of analysis & system development tools (e.g. ANSYS/Fluent, ANSYS/Mechanical, MATLAB, LabView, Pro/e, EnergyPlus, GT-SUITE, etc.)
$62k-81k yearly est. 60d+ ago
Plant Engineer
Wade Linen Service
Design engineer job in Columbus, GA
Maintenance Technicians may oversee multiple grounds or spend their time dedicated to a single facility. They work flexible hours responding to emergencies as necessary and completing scheduled maintenance when convenient for the building owner.
A Maintenance Technician is responsible for keeping a facility operating and repairing any problems when they are discovered before they have a chance to worsen.
A Maintenance Technician will be required to perform a wide range of repair tasks around a facility. Some other tasks a Maintenance Technician may be called upon to do include:
Keeping a schedule of routine repairs, inspection sheets and supply needs.
Perform preventive maintenance on equipment to prevent equipment from going down i.e. inspect wiring (prevent shortages etc.), repair pipes, troubleshoot equipment, replace light bulbs, and install new equipment.
They document temperature information on boilers and other temperature control systems to ensure safety and identify discrepancies that could indicate a machinery problem.
Shop for materials and track receipts for reimbursement to make timely repairs. Maintenance Technicians
Performing routine facility maintenance around the building addressing/fixing structural damage or disrepair to windows, doors, walls, painting, sealant application, etc.
Repairing broken or leaking plumbing to avoid water damage and restore full use of water fixtures
Maintaining the building HVAC equipment in order to keep climate control in the facility functioning properly
Applying preventative measures to the building to reduce the risk of future problems, such as using a sealant on a flat roof
Fixing potential safety hazards and security risks to avoid injuries as per Health and OSHA regulations and guidelines.
Monitor and alert supervisory staff of suspicious or potentially destructive or disruptive behavior: things that may negatively affect the welfare of the company and its employees, vendors, and customers.
At the end of the day, we are all here to improve the environment and lives of our team members, customers, vendors, and ourselves.
$74k-108k yearly est. Auto-Apply 60d+ ago
Manufacturing Engineer
Hueman Pe Talent Solutions
Design engineer job in Alexander City, AL
Job Description
A top client has partnered with Hueman to hire a Manufacturing Engineer in Alexander City, AL.
The Manufacturing Engineer is responsible for process improvements and process engineering activities at our facility (Standard Operating Sheets, Production Work Instructions, Poka-yokes, Layout Changes, Process Trainings, Line Balancing, Machine Reliability Studies, and Capital Project Execution). This position involves working in a team environment with safety, maintenance, plant production supervision, and engineering support departments. This position will focus on implementing projects that directly impact machine uptime, equipment reliability, and product quality.
essential duties & responsibilities:
Support manufacturing on layout changes and equipment moves for existing or new equipment introductions through the capital process.
Review history of equipment downtime and analyze the likelihood of repeated failures.
Prioritize the likely failures.
Analyze the failures. (5 why's)
Investigate and create/design the best possible countermeasures and/or early warning indicators to prevent failures.
Implement countermeasures and monitor results.
Perform advanced troubleshooting equipment during breakdowns (downtime).
Assist operators and maintenance in machine design, programming, and function issues.
Assist in confirming machine repeatability.
Analyze spare parts & tooling needed for the equipment.
Assist managers/supervisors in resolving non-downtime (nuisance) issues.
Analyzes, develops and recommends design approaches necessary to meet production requirements for new or improved products and/or processes.
Determine from part drawings and related engineering data the operation necessary for the fabrication and assembly of product.
Develop production equipment needs and justifications for new equipment and processes.
Use lean tools to troubleshoot and support production.
Support problem solving & 6S events
Travel as business needs require which is currently expected to be minimal.
Perform other duties as may be assigned at management's discretion
qualifications:
Ability to handle multiple projects with tight timelines in a fast-paced team-oriented environment.
Strong problem-solving skills.
Ability to be self-starting and self-directing with limited supervision.
Strong communication skills - listening, verbal, written and presentation.
Must be able to use AutoCAD fluently.
Strong attention to detail and accuracy.
Proficiency in the Microsoft Office suite (Excel Word PowerPoint Outlook);
CNC programming experience is preferred, but not required.
3-5 years of related experience in an engineering support department with emphasis on lean practices is preferred.
Experience with lean and ability to utilize and implement lean practices.
Effective working knowledge of manufacturing processes.
Prior experience developing justifications for new equipment
Prior cabinet experience preferred
Hueman is proud to partner as the exclusive recruitment partner for this role. If you are interested in learning more about this opportunity as a Manufacturing Engineer, apply today!
$68k-87k yearly est. 9d ago
Manufacturing Engineering Co-op - US - Fall 2026
GE Aerospace 4.8
Design engineer job in Auburn, AL
Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen.
Job Description
Job Summary
Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern! The Manufacturing Engineering internship offers a distinct role based on your major and field of interest:
Manufacturing Engineering Internship: In this role you will build a strong technical foundation in manufacturing and assembly processes. This may include key manufacturing, new product integration, new technology integration, continuous improvement, and cost out. This internship is a great first step for those interested in our MEDP or OMLP program after graduation.
Essential Responsibilities
Our Manufacturing and Supply Chain organizations combine passionate people, cutting-edge technology, and a culture of continuous improvement to provide the highest quality products to our customers. Members of our team are part of a fast-paced and dynamic environment. They typically have the benefit of getting hands-on experience with our products. In either internship experience, you'll be expected to:
* Learn and understand state-of-the-art methods of manufacturing,
* Support manufacturing and repair processes for component hardware and/or overall engine assembly,
* Maintain high-quality standards via risk assessment, root cause analysis, corrective action, and the application of statistical controls
* Ensure safe work conditions via Environmental, Health & Safety (EHS) initiatives
* Learn and apply Lean and Six Sigma principles to drive productivity, on-time delivery, process capability, and stable operations in our increasingly complex and demanding environment
* Supporting delivery efforts for sourced components by working with our shops and suppliers while building project management skills, negotiation skills, and business acumen
Qualifications/Requirements:
* Minimum 3.0 cumulative G.P.A. on a 4.0 scale without rounding
* Attending a full-time registered and nationally accredited bachelor or graduate program (accepted majors are listed below)
* Willingness and ability to work in any of the 35+ GE Aerospace U.S. locations
* Reliable transportation, as many of our sites do not have public transportation available
Degrees accepted:
* Aeronautical/Aerospace Engineering
* Ceramic Engineering
* Chemical Engineering
* Civil Engineering
* Computer Engineering
* Computer Science
* Electrical Engineering / Electrical & Computer Engineering
* Engineering Technology (various)
* Fiber/Polymer Science
* Industrial Engineering
* Manufacturing Engineering
* Materials Science/Engineering
* Mechanical Engineering
* Systems Engineering
* Welding Engineering
Or any relevant or similar major to the ones above
Eligibility Requirements:
Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening.
Desired characteristics:
* Humble: respectful, receptive, agile, eager to learn
* Transparent: shares critical information, speaks with honesty, contributes constructively
* Focused: quick learner, strategically prioritizes work, committed, and takes initiative
* Leadership ability: strong communicator, decision-maker, collaborative teamwork
* Problem solver: analytical-minded, challenges existing processes, critical thinker
* Comfortable working in a fast-paced shop floor environment around various machine tools and equipment
* Preference will be given to those with prior internship, co-op or military experience in manufacturing/supply chain or engineering
* Demonstrated commitment to community and/or university involvement
Benefits:
Pay rates for this position begin at $20/hour and increase for each undergraduate year completed. Relocation support and housing assistance is available for those who relocate to a new city.
Equal Opportunity Employer:
GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.
This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)).
Additional Information
GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.
GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).
Relocation Assistance Provided: Yes
$20 hourly Auto-Apply 23d ago
Electrical Design Engineer
Collabera 4.5
Design engineer job in LaGrange, GA
Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs.
Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance.
Job Description
Candidate Responsibilities:
Position is for a designengineer in the Electrical design team located in LaGrange, GA. Responsible for development of electrical system design such as component selection, component placement, electrical schematic creation, harness routing, and bracket designs. Responsibilities include: design of the electrical systems, verification of the designs, working through interfaces with other design teams, initiating and checking completion of detailed designs, costs of final designs, and other design tasks as required.
Job Skill Requirements include:
Strong analytic and problem solving skills, proficient in 3D modeling (ProE/Creo), working knowledge of electrical systems, capability to read and create electrical schematics, TeamCenter database manager, New Product Development Experience, understanding BOM structures, Excel, Powerpoint, MS Office, Strong verbal and written communication skills. It is highly desirable that the candidate have previous Cat experience in NPI and Cat data systems.
Education/Experience:
Bachelor's degree in engineering required and two to five years of engineering experience in design required. This position is on-site in LaGrange, GA, and remote work will not be considered.
Typical Day
Typical work day is in the office designing and modeling electrical systems, including harness routing and schematic creating, using Pro-E/Creo modeling software as well as leading off site resources for detailing. Candidate will work in collaboration with other system designengineers, manufacturing engineering, purchasing, and supply chain to develop designs that meet customer requirements. Some work is determining root cause and developing solutions to issues found during product development.
Qualifications
Technical Skills
Knowledgeable of electrical system components and electrical component system interactions.
Soft Skills
Good communication skills required in verbal, written, and presentation. Must be able to work well in a team environment.
Travel Requirement: 0-25%
On-Site Interview Required: No
Additional Information
If you are interested, please feel free to contact me at:
Jeff Demaala
************
$67k-90k yearly est. 1d ago
Project Engineer
Cornerstone Detention Products 3.9
Design engineer job in Montgomery, AL
Company Info:
Cornerstone Electronics provides completely integrated scalable security electronic solutions for any size and type of detention facility. We supply Federal, State, and County correctional and detention facilities with virtually everything needed to succeed in the ever-changing world of security, from hardware to electronics. Our systems can integrate any combination of touch screens, PLC based door control, intercom systems, CCTV, video visitation, card access, duress systems, utility control, graphical control panels, perimeter systems and more.
Primary Job Functions:
The Project Engineer is responsible for all activities relating to the integration of the security and communications systems for new and existing correctional facilities. These activities include oversight and preparation of engineered submittals, fabrication drawings, and installation documentation, procurement, scheduling, coordination with project managers, general contractors, and field staff, project startup, commissioning, testing, and closeout. The project engineer is also responsible to coordinate internally with the project management, programming, drafting, and installation staff to ensure project needs and requirements are fulfilled.
Required Skills:
Necessary skills include AutoCad and proficiency with Windows and Microsoft office programs. Knowledge of electronics, computer systems, CCTV, audio, card access, and duress systems is a must. Excellent communication skills, both written and verbal is required.
Desired Skills
Knowledge of networks, PLC systems, and HMI experience are a plus.
Experience:
Seeking applicants with a minimum of 2 years engineering experience in electronic security or automation controls.
Education:
Minimum Requirement: Bachelor of Science in Electrical Engineering or relevant engineering technology field.
This position requires travel up to 20% of the time.
EOE/M/F/Veteran/Disabled
$64k-92k yearly est. 60d+ ago
Project Engineer / Environmental Compliance Professional
Ttl Inc. 4.5
Design engineer job in Montgomery, AL
Founded in 1964, TTL is an engineeringdesign firm focused on delivering integrated infrastructure solutions for public and private clients. From site and corridor selection to due diligence, design, and construction services, TTL is your trusted partner providing single-sourced custom solutions for complex infrastructure development. With more than 500 team members across the Southern United States, TTL provides a wide range of services, including civil engineering; transportation design and CEI; geotechnical engineering; environmental consulting; construction materials engineering and testing; and surveying, GIS, and mapping.
At TTL, we are driven to serve our clients, driven to serve our communities, and driven to serve our people. TTL not only provides a great work/life balance, but we provide excellent employee benefits such as a robust health & dental plan, vision, 401(k), flexible spending accounts, and generous paid time off (PTO) accrual.
For more information, please go to ***************
Build your legacy at TTL
Project Engineer / Environmental Compliance Professional - Birmingham, AL (preferred)
Will consider other TTL Alabama Office and potential for remote/hybrid opportunity within the state of Alabama.
TTL is seeking an experienced Environmental Compliance Professional/Engineer with 8+ years of demonstrated experience supporting environmental permitting and regulatory compliance projects within industry and/or in a previous consulting role. This role will focus heavily on air and water environmental permitting, including PSD and Title V regulatory programs and NPDES permitting and compliance. The ideal candidate is detail-oriented, proactive, independent, and comfortable working with regulatory agencies, clients, and internal teams.
Key Responsibilities
Manage and support air permitting projects, including Prevention of Significant Deterioration (PSD), Title V, and State Implementation Plan permits
Understand and interpret project-specific regulatory applicability and compliance with federal, state, and local air quality regulations (including NSPS, NESHAP, and other CAA components)
Prepare, review, and submit NPDES permit applications, renewals, and modifications
Oversee NPDES compliance activities, including monitoring, reporting, and recordkeeping
Interpret environmental regulations and communicate requirements clearly to clients (both manager and technician level personnel at regulated facilities )
Interface with regulatory agencies during permitting, inspections, and audits
Develop and implement compliance strategies, procedures, and best management practices for a variety of industrial settings
Support environmental reporting, inspections, and internal audits as needed
Required Qualifications
Bachelor's degree in Chemical Engineering, Environmental Engineering, Environmental Science, or a related field
Minimum of 5 years of experience in supporting environmental permitting and compliance
Demonstrated experience with air permitting, including PSD and Title V programs
Demonstrated experience with NPDES permitting and compliance
Strong knowledge of federal and state environmental regulations
Excellent written and verbal communication skills
Proven ability to manage multiple projects and meet regulatory deadlines
Preferred Qualifications
Experience working with industrial facilities and manufacturing processes
Experience interacting directly with regulatory agencies
Professional certifications (e.g., PE, CHMM, REM) are a plus
Experience with RCRA/EPCRA/TSCA compliance and/or industrial hygiene is a plus
Job Type: Full-time
This position is subject to a pre-employment drug and motor vehicle record check.
TTL is an EEO/AAP employer.
$63k-92k yearly est. Auto-Apply 7d ago
Manufacturing Engineer
Talentcore, Inc.
Design engineer job in Tallassee, AL
Job Description
Opportunity to join a leading Aerospace Manufacturer in Greater Montgomery, AL. Our client is seeking an experienced Manufacturing Engineer to join their team in support of cutting edge composite production programs.
As a Manufacturing Engineer, you'll support both production and development programs, ensuring zero-defect manufacturing execution through robust process design and continuous improvement. This role focuses on implementing advanced manufacturing technologies across materials, tooling, fabrication, and assembly.
Job Responsibilities
What You'll Do Develop and implement technical solutions for complex manufacturing challenges.
Provide manufacturing engineer support for production integration and supplier-related issues.
Lead root cause investigations and corrective actions to resolve non-conformances.
Design tooling and production plans using standard manufacturing engineering methodologies.
Support product development activities for manufacturing, which include quoting, tooling design, configuration changes, and first article inspections.
Deliver measurable results aligned with manufacturing program and value stream objectives.
Collaborate cross-functionally with internal teams and external partners.
Champion Lean initiatives and drive continuous improvement through various manufacturing processes.
Perform other duties as assigned.
Job Qualifications
Bachelor's degree in Engineering, Manufacturing Engineering, or a related field.
3 (three) years of experience in manufacturing engineering.
Experience with composite materials or equivalent engineered materials (e.g., fiber-reinforced polymers, laminates, or hybrid structures) in a manufacturing or product development environment.
U.S. Person status per ITAR requirements.
Preferred Qualifications:
Strong continuous improvement mindset and results-driven approach.
Ability to work independently across diverse manufacturing environments.
Excellent interpersonal and communication skills.
Experience mentoring or coaching team members.
Demonstrated leadership, initiative, and sound judgment.
Six Sigma or Lean Manufacturing experience is a plus.
This position is based in Tallassee, AL, with relocation assistance available. Nearby communities such as Auburn, Wetumpka, Opelika, and Montgomery offer a range of residential options within commuting distance.
$68k-87k yearly est. 21d ago
Manufacturing Engineer
GKN Aerospace Services
Design engineer job in Tallassee, AL
Company: GKN Aerospace Careers Manufacturing Engineer - Aerospace Composites As a Manufacturing Engineer, you'll support both production and development programs, ensuring zero-defect manufacturing execution through robust process design and continuous improvement. This role focuses on implementing advanced manufacturing technologies across materials, tooling, fabrication, and assembly.
Job Responsibilities
* What You'll Do Develop and implement technical solutions for complex manufacturing challenges.
* Provide manufacturing engineer support for production integration and supplier-related issues.
* Lead root cause investigations and corrective actions to resolve non-conformances.
* Design tooling and production plans using standard manufacturing engineering methodologies.
* Support product development activities for manufacturing, which include quoting, tooling design, configuration changes, and first article inspections.
* Deliver measurable results aligned with manufacturing program and value stream objectives.
* Collaborate cross-functionally with internal teams and external partners.
* Champion Lean initiatives and drive continuous improvement through various manufacturing processes.
* Perform other duties as assigned.
*
Job Qualifications
* Bachelor's degree in Engineering, Manufacturing Engineering, or a related field.
* 3 (three) years of experience in manufacturing engineering.
* Experience with composite materials or equivalent engineered materials (e.g., fiber-reinforced polymers, laminates, or hybrid structures) in a manufacturing or product development environment.
* U.S. Person status per ITAR requirements.
Preferred Qualifications:
* Strong continuous improvement mindset and results-driven approach.
* Ability to work independently across diverse manufacturing environments.
* Excellent interpersonal and communication skills.
* Experience mentoring or coaching team members.
* Demonstrated leadership, initiative, and sound judgment.
* Six Sigma or Lean Manufacturing experience is a plus.
Relocating? We can help.
This position is based in Tallassee, AL, with relocation assistance available. Nearby communities such as Auburn, Wetumpka, Opelika, and Montgomery offer a range of residential options within commuting distance.
$68k-87k yearly est. 53d ago
Manufacturing Engineer II
Heckler & Koch Defense Inc.
Design engineer job in Columbus, GA
Job Description
Responsible for designing, developing, and improving production processes to ensure parts and assemblies are made efficiently, safely, and to quality specifications. Responsibilities include optimizing assembly and machining workflows, implementing lean manufacturing principles, maintaining and troubleshooting equipment, collaborating with other departments, and ensuring compliance with safety and regulatory standards.
Essential Functions:
Sets and reviews engineering specifications, process flows, and other information to understand methods that are applied and activities that take place in the manufacturing process.
Process Design: Design manufacturing processes, for both ferrous and nonferrous materials, to convert raw materials to finished products. This includes defining the sequence of manufacturing operations, equipment selection and/or equipment design, workholding/fixture design, staffing requirements, subcontract operations, and supporting BOMs and routings.
Process improvement: Utilizing time studies, Lean philosophies, and Six Sigma techniques, analyzing existing manufacturing processes to identify opportunities to improve efficiency, quality and manufacturing cost.
Determines how to manufacture parts or products with maximum efficiency.
Design, source, assemble, and validate workholding and tools in support of manufacturing operations. Incorporate PLCs, hydraulics, and automation to reduce operator fatigue, error-proof processes and maximize efficiency.
Write technical requirements and RFPs for supplier quotations.
Champion business cases and internal cost justifications for capital expenses.
System and facility design: Conceive, design, and develop new manufacturing systems, equipment layouts, tooling, and fixtures. Maintain factory layout.
Automation and technology: Identify and implement automation opportunities, using robotics, computer networks, and computer-aided software to streamline workflows and improve data collection.
Tooling & Fixture Design: Design, source and build fixtures, tools, and other equipment needed for product machining and processing.
Produce manufacturing process drawings in accordance with ASME Y14.5-2009.
Coordinates with management personnel regarding manufacturing capabilities.
Lead PFMEA meetings. Support and contribute to DFMEA activities.
Ensure that engineering data is properly managed via SolidWorks PDM.
Responsible for determining requirements, evaluating machinery, and preparing recommendations for machinery purchases.
Responsible for planning and designing poka-yokes to help equipment operators avoid mistakes or eliminate product defects by preventing, correcting, or drawing attention to human errors as they occur.
Enacts quality control procedures to resolve production problems or minimize costs.
Additional Responsibilities:
Responsible for providing support by assisting in identification of new vendor networks.
Define and address the root causes of manufacturing issues.
NPI experience, including process development and capital equipment selection.
Strong root cause analysis and corrective action skills.
Strong understanding of DFM/A principles.
Knowledge, Skills and Abilities:
Prior experience in planning assembly and machining production lines.
Extensive knowledge and ability to identify appropriate manufacturing technologies for assembly and machining processes.
Strong mechanical design experience of mechanisms including hydraulic, pneumatic, and electrical components.
Excellent computer skills (Microsoft Office Suite, Solidworks, AutoCAD).
Ability to use standard measurement tools such as micrometers, calipers, and dial indicators.
Strong technical writing skills.
Self-starter with an ability to work under little to no supervision.
Ability to work and communicate effectively with all departments and all levels of the organization, including non-technical personnel.
Ability to manage multiple tasks under pressure and with tight deadlines.
Proficient with SAP or compatible system.
Experience coordinating with vendors.
Educational/Experience Requirements:
You must have 5-7 years of relevant experience in a manufacturing environment.
A bachelor's degree in engineering (Mechanical, Industrial or equivalent).
Experience in implementing and contributing to a Lean environment.
Experience with firearms manufacturing is a plus.
$62k-79k yearly est. 3d ago
Project Engineer, Georgia
Vulcanmat
Design engineer job in Columbus, GA
Project Engineer, Georgia - 2500029P Description Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete.
When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country.
When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded and diversity is valued.
No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time.
About the Job: The Project Engineer will ensure safety, inspect plant systems, and support operations across multiple sites across Georgia, including Atlanta, Macon, Columbus, and others.
Responsibilities include project management from design to implementation, structural design, plant troubleshooting, technical support for the SHE department, and anything else related to the mining operation.
Movement between quarries will be necessary on an almost daily basis.
There will also be opportunities to interface with work in other areas of the Division.
What You'll Do: Manage Design.
Uses AutoCAD to perform design tasks and produce drawings.
Draws on internal/external mechanical and civil designer resources as required, who produce the majority of drawings.
Inspect.
Provides field supervision/inspection services on construction projects.
Performs post-project review to ensure key objectives, cost/performance improvements, and rate of return are achieved.
Prepare Bid Packages.
Prepares bid packages for construction and manages construction contracts.
Provide Updates.
Provide project updates on a regular basis to various stakeholders about strategy, adjustments, and progress.
Represent the Company.
Represents the company to industry associations, government officials, and public agencies.
Additional Responsibilities.
Other duties as assigned.
Travel.
Varies based on projects, up to 25%.
Most travel will be in central Georgia.
Qualifications Skills You'll Need:Education.
BS degree in Civil or Mechanical Engineering.
Mining Engineering degrees considered with substantial civil/mechanical/project experience.
License.
Being on the path to PE licensure is preferred.
Experience.
1-5 years of project management and related experience with experience in a heavy industrial or mining environment.
Strong familiarity with project management and engineering software tools, methodologies, and best practices.
Recent graduates considered with substantial co-op or other work experience.
Basic understanding of preparing a project scope, budget, and timeline.
Must have competent knowledge of concrete and steel design, building codes, and construction practices.
Fundamental project management skills are desired.
Other essential skills include some competency with AutoCAD and being fully functional with the Microsoft Office suite.
Leadership Skills.
Acts decisively and supports all aspects of the company to work together to accomplish the objectives, vision, mission, and values of Vulcan.
Trusts and allows people to do their job, holding them accountable for the full extent of their responsibilities.
Develops innovative solutions to problems by trying non-obvious or non-traditional approaches.
Organizational Skills.
Identifies and defines clear short-term goals and/or work outcomes that are required to implement strategic goals.
Problem Solving.
Proven ability to solve problems creatively and effectively.
Detail oriented.
Follows through with commitments and solves problems in a timely fashion.
Deals skillfully and promptly with new situations.
Ask a series of probing questions to go beyond surface issues and fully understand the components of a problem and its root causes.
Analytical Skills.
Verifies assumptions or interpretations by checking with credible sources or through first-hand observation and data-gathering.
Computer Skills.
Advanced computer skills including spreadsheets and Microsoft Office Suite is required.
Skill in drawing and designing with AutoCAD/land desktop preferred.
Interpersonal Communication.
Must possess strong interpersonal skills and must be extremely resourceful.
Communicates clearly and listens carefully in an open, candid, and consistent manner.
High Integrity.
Acts with unyielding integrity and honesty in business transactions, promoting company policies and holding self and other employees accountable, keeping promises and commitments.
Honors your commitments to yourself and others.
Acknowledging and correcting your own mistakes.
Taking full ownership to address and fix problems vs.
deflecting blame to others.
Safety-Oriented.
Sets a safety tone for all activities; and upholds the highest standards for protecting people and the environment.
What You'll Like About Us:Great Company Culture.
Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication.
Safe.
The industry leader in health and safety standards.
We are committed to creating a safe work environment and protecting all employees and customers.
Meaningful Work.
What sets us apart is the work we do impacts our daily lives - and every employee contributes.
Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States.
Health Benefits.
Medical, Dental, and Vision programs, plus much more.
Rest and Relaxation.
Paid vacation, personal floating days, and paid holidays.
Prepare for the Future.
401(k) with company match and contribution.
Training and Development.
We see our development programs and helping our employees meet their goals as a key part of our business.
Vulcan Materials Company is committed to employing a diverse workforce.
You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability.
You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions.
Job: Engineering Primary Location: Georgia-Atlanta Other Locations: Georgia-Columbus, Georgia-Macon Organization: GM - SOD DIV OH Schedule: Full-time Job Posting: Sep 2, 2025, 4:24:25 PM
$62k-85k yearly est. Auto-Apply 1d ago
ELMT Design Project Engineer, Eng II (Onsite)
RTX Corporation
Design engineer job in Columbus, GA
**Country:** United States of America , Midland, GA, 31820 USA ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
**Security Clearance:**
None/Not Required
Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious.
Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future.
At Pratt & Whitney, the difference you make is on display every day. Just look up. **Are you ready to go beyond?**
**What You Will Do:**
The Engine Life Management Team (ELMT), part of the Pratt & Whitney Aftermarket and Sustainment Engineering (ASE) team based at Columbus Engine Center (CEC), has an open on-site position at CEC for a cross functional Design-related Project Engineer supporting various (Repair and Limits) Design, Component Integrated Product Teams (CIPTs), and the Component Aftermarket Integrated Product Teams (CAIPTs) in support of aftermarket operations and the maturation of the NGPF fleet.
The primary function of this position is to facilitate Repair and Limits design tasks, including Project Engineering, technical writing, and Repair and Limits Design. Secondary responsibilities will be varied but include general project management and support of various Aftermarket/CIPT/CAIPTs responsible for various GTF hardware at CEC in Columbus, GA. This position is a key role within ASE as it provides a direct engineering link to the commercial aftermarket.
Candidate should be customer focused as well as technically proficient and capable of effective and professional technical communication, since this role will include direct interface with aftermarket operations, program management, and Engineering management.
+ Work as an onsite representative of ASE supporting Repair and Limits Design tasks and CIPT/CAIPT engine/hardware investigations and dispositions.
+ Coordinate and influence resources to meet technical, development and production requirements
+ Monitor and trend hardware health for limit updates, product improvement, and repair activities.
+ Liaise between Aftermarket Operations and Engineering regarding design tasks and investigation scope and implementation.
+ Prepare and present status and technical content to cognizant Pratt & Whitney stakeholders.
+ Facilitate or complete the evaluation of incoming tasks and hardware non-conformances.
+ Support (Repair and Limits) Design team in the resolution of EagleNet cases raised by Aftermarket Operations.
**Qualifications You Must Have:**
+ Bachelor's degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience or an advanced degree in a related field
+ Microsoft Excel and PowerPoint skills and experience to effectively communicate with audiences ranging from operations to the executive level.
+ Requires substantial knowledge of RTX projects, programs or systems to provide enhancements within job area.
+ Professional technical contributor
+ U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract
+ 10% Travel
**Qualifications We Prefer:**
+ Advanced degree and/or experience in Aerospace or Mechanical Engineering
+ A working knowledge of SAP, P&W Quality Systems, configuration management process.
**What We Offer:**
+ Relocation
**Learn More & Apply Now!**
**What is my role type?**
In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is:
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.
Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility.
**_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._**
The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
_RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._
**Privacy Policy and Terms:**
Click on this link (******************************************************** to read the Policy and Terms
Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
$62k-85k yearly est. 50d ago
Student Transcriptionist - Engineering Online
Auburn University 3.9
Design engineer job in Auburn, AL
Details** Information **Requisition Number** Stu04790P **Home Org Name** Engineering Online **Division Name** Samuel Ginn Col of Engineering Title** Student Transcriptionist - Engineering Online Title)**
**Job Summary**
Working for the Engineering Online Instructional Designer assisting with the transcription of online classes.
**Essential Functions**
Students working in this position must be prompt and reliable. They will be primarily working from their laptop, where they will assist with the closed-captioning of the online courses.
This job will require the ability to listen to audio responses and transcribe the speaker word for word. The work is very detail-oriented and meticulous. The transcriber must be able to listen, read, and write in English. Familiarity with Panopto and Word is a plus.
**Why Work at Auburn?**
+ **Life-Changing Impact** : Our work changes lives through research, instruction, and outreach, making a lasting impact on our students, our communities, and the world.
+ **Culture of Excellence** : We are committed to leveraging our strengths, resources, collaboration, and innovation as a top employer in higher education.
+ **We're Here for You** : Auburn offers generous benefits, educational opportunities, and a culture of support and work/life balance.
+ **Sweet Home Alabama** : The Auburn/Opelika area offers southern charm, vibrant downtown scenes, top-ranked schools, and easy access to Atlanta, Birmingham, and the Gulf of Mexico beaches.
+ **A Place for Everyone** : Auburn is committed to fostering an environment where all faculty, staff, and students are welcomed, valued, respected, and engaged.
Ready to lead and shape the future of higher education? Apply today! War Eagle!
**Minimum Qualifications**
Must be a student worker who can be reliable and prompt. Completing assigned tasks is imperative to quality of our online courses.
Must be able to listen and pay attention to detail. Must be fluent in written English communication.
**Preferred Qualifications**
We are located in Ramsay Hall, however this job can be completed from a laptop and secure network anywhere.
**Pay Rate**
$10.00/hour
**Work Hours**
10-15
**City position is located in:**
Auburn
**State position is located:**
Alabama
Posting Detail Information
**Posting Date**
10/02/2025
**Closing Date**
**Equal Opportunity Compliance Statement**
It is our policy to provide equal employment and education opportunities for all individuals without regard to race, color, national origin, religion, sex, sexual orientation, gender identity, gender expression, pregnancy, age, disability, protected veteran status, genetic information, or any other classification protected by applicable law. Please visit theirwebsite (*************************************** to learn more.
**Special Instructions to Applicants**
**Quick Link for Internal Postings**
*******************************************
**Documents Needed to Apply**
**Required Documents**
1. Resume
**Optional Documents**
$10 hourly 60d+ ago
Electrical Design Engineer
Collabera 4.5
Design engineer job in LaGrange, GA
Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs.
Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance.
Job Description
Candidate Responsibilities:
Position is for a designengineer in the Electrical design team located in LaGrange, GA. Responsible for development of electrical system design such as component selection, component placement, electrical schematic creation, harness routing, and bracket designs. Responsibilities include: design of the electrical systems, verification of the designs, working through interfaces with other design teams, initiating and checking completion of detailed designs, costs of final designs, and other design tasks as required.
Job Skill Requirements include:
Strong analytic and problem solving skills, proficient in 3D modeling (ProE/Creo), working knowledge of electrical systems, capability to read and create electrical schematics, TeamCenter database manager, New Product Development Experience, understanding BOM structures, Excel, Powerpoint, MS Office, Strong verbal and written communication skills. It is highly desirable that the candidate have previous Cat experience in NPI and Cat data systems.
Education/Experience:
Bachelor's degree in engineering required and two to five years of engineering experience in design required. This position is on-site in LaGrange, GA, and remote work will not be considered.
Typical Day
Typical work day is in the office designing and modeling electrical systems, including harness routing and schematic creating, using Pro-E/Creo modeling software as well as leading off site resources for detailing. Candidate will work in collaboration with other system designengineers, manufacturing engineering, purchasing, and supply chain to develop designs that meet customer requirements. Some work is determining root cause and developing solutions to issues found during product development.
Qualifications
Technical Skills
Knowledgeable of electrical system components and electrical component system interactions.
Soft Skills
Good communication skills required in verbal, written, and presentation. Must be able to work well in a team environment.
Travel Requirement: 0-25%
On-Site Interview Required: No
Additional Information
If you are interested, please feel free to contact me at:
Jeff Demaala
************
$67k-90k yearly est. 60d+ ago
Staff Engineer - Turbine Airfoils Engineer
GE Aerospace 4.8
Design engineer job in Auburn, AL
SummaryAs a Senior DesignEngineer in-the shop, you will be at the intersection of design and manufacturing! In this role, you will support producibility projects, improve communication across teams, deploy structured problem solving on-site, and support the resolution of delivery problems, and more. This role requires cross functional collaboration across Manufacturing, Quality, Mechanical Design, Thermal Design and others. This role requires clear communication skills, influential leadership, a self-starter mentality, as well as the ability to work with all levels of the organization.Job Description
Roles and Responsibilities:
Execute the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements. This work would include mechanical and/or electrical engineering for all products
Developing in-depth knowledge of a technical discipline. Uses prior experience and acquired technical expertise to execute policy/strategy.
In-depth understanding of key business drivers; uses this understanding to accomplish own work. In-depth understanding of how work of own team integrates with other teams and contributes to the area.
Uses some level of judgment and has ability to propose different solutions outside of set parameters but with guidance. Uses prior experience and on-the-job training to solve straightforward tasks. Has access to technical skills and analytic thinking required to solve problems. May use multiple internal sources outside of own team to arrive at decisions.
A job at this level is likely to be an individual contributor with proven interpersonal skills or an early people leader who can hire and develop talent. Provides informal guidance to new team members
Minimum Required Qualifications:
Bachelor's Degree accredited college or university
Minimum of 5 years of designengineering or manufacturing experience
Desired Characteristics and Experience:
Turbine airfoils design experience
Background in Manufacturing
Exposure to Material Review Board (MRB) activities
Certification in ASME Y14 or experience with GD&T
Demonstrate ability to analyze and resolve problems.
Ability to document, plan, market, and execute programs.
Established project management skills.
Humble: respectful, receptive, agile, eager to learn
Transparent: shares critical information, speaks with candor, contributes constructively
Focused: quick learner, strategically prioritizes work, committed
Leadership ability: strong communicator, decision-maker, collaborative
Problem solver: analytical-minded, challenges existing processes, critical thinker
GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness.
GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual.
This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)).
Additional Information
GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.
GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).
Relocation Assistance Provided: Yes
How much does a design engineer earn in Auburn, AL?
The average design engineer in Auburn, AL earns between $56,000 and $91,000 annually. This compares to the national average design engineer range of $57,000 to $102,000.