Design engineer jobs in Beaumont, TX - 62 jobs

Summary of Description: Designer I will provide direction and supervision of drafting by preparing sketches and drawing layouts under the direction of an engineer or design specialist. Ability to coordinate field data gathering with little to no supervision. Ability to check design drawings but not responsible for the final checking (this is the responsibility of either the design engineer or the design specialist). Duties: Computer aided drafting - AutoCAD, CADWorx, or similar 3D software. Developing plans, sections, details, or 3D models from sketches. Drawing layout, dimensioning, and extraction of drawings from 3D model. Field measurements and sketches. Knowledge of basic discipline symbols, drafting standards, and codes. Ability to read and understand civil, piping, mechanical, electrical and instrumentation, and project related drawings, Perform other job-related duties as assigned. Education and Experience: High School diploma and vocational drafting school with at least six (6) years of experience in discipline, or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job such as those listed above. Licensing Requirements Valid Driver's License as per State law or requirement Specific Skills: Basic Math including geometry and trigonometry. Proficient in Microsoft Office and Outlook with preference on spreadsheets, data base and word processing. Proficient in AutoCAD. Physical Requirements: Ability to walk up to one mile on industrial plant and construction sites outdoors at any time of the year. Ability to work in protective clothing which may elevate body temperatures by several degrees Fahrenheit for periods of up to 15 minutes without a break. Ability to use multi-level stair towers and rung ladders unassisted. Ability to hear safety alarms and signals while wearing hearing protection. Ability to sit at desk and operate computer for extended periods of time. Ability to stand, use hands and fingers, grip, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk and hear. Ability to see with visual acuity and distinguish between colors. Ability to operate a motor vehicle and have a valid driver's license. Ability to lift and carry 15 lbs. on a regular basis is required and at times lifting up to 25 lbs. may be required. #LI-RECON

At Optimus Steel, we are looking for team members who are seeking to grow professionally and personally, individuals who will embrace the passion of our company, which is to Strive for Perfection in Everything We Do. We are committed to investing in and challenging every Optimus team member to achieve their professional goals, to grow individually and help us as Optimus continue to expand our capabilities, capacities and footprint. As we expand, challenging work opportunities will arise. We will need the right type of talented and skilled professionals to drive the growth of our company. Join our Talented Team! Be part of something new and exciting. Program Description Optimus proudly offers internship programs, through which students can jump start their career with hands-on experience with one of the largest steel producers in the world. Working at Optimus is an opportunity to be part of a team that is a benchmark in the industry in which it operates. At Optimus, internships are project-focused, mutually-beneficial experiences, which ultimate goal is to attract, develop and retain the best entry-level talent with potential for future technical and managerial positions. Program Duration Optimus offers internship programs that are both 29 hour and 40 hour per week internship that last from 6 months to a year based on the student's needs. Profile for Interns An Intern with Optimus must have an eagerness to grow personally and professionally, being a part of a growing company in the steel industry here in Beaumont. This program is for individuals with high learning agility and willingness to adapt and develop continuously, who aim at consistently outperforming in a variety of settings and circumstances. During the program you will interact with team members from around the world. You will have the opportunity to learn on the job and work on challenging projects that will further your development. Requirements * Have completed at least two years* of a university degree from a recognized accredited college or university in Engineering (Electrical, Mechanical, and Metallurgical). * Record of high academic achievement: Interns must maintain a minimum of a 2.5 out of 4.0 overall grade point average. * Must be legally authorized to work full-time in the country of hire without requiring current or future sponsorship for employment . * Candidates much demonstrate leadership potential, strong interpersonal skills, excellent written and oral communication skills, initiative, and problem-solving skills. * Entering freshmen are not eligible for internships. Optimus offers competitive wages, on-the-job experience, organization orientation, work assignments and projects with clear and targeted goals that allow young professionals to earn invaluable experience.

Client Relationships: Develop and maintain strong relationships with all client personnel, including direct and contract employees. Technical Expertise: Serve as a SME for rotating equipment, continuously expanding knowledge in this area. Product Knowledge: Maintain a deep understanding of reliability platforms, especially Emerson's AMS products and services. Consulting Skills: Apply advanced consulting skills, including risk management, project management, financial analysis, and persuasive communication. Compliance & Safety: Ensure compliance with all safety regulations and standards, including OSHA. Regular and predictable attendance is essential for this position. Collect and analyze machinery condition data using Emerson's and Windrock's suite of tools, hardware, and software. Interpret results in the context of process variables and operational conditions to provide accurate diagnostics and actionable insights for asset health and performance improvement. Build, manage, and optimize vibration databases for efficient route-based monitoring and long-term asset trending. Interpret vibration signatures and generate professional technical reports, including recommended corrective actions. Support proper collection techniques and data transfer processes. Collaborate closely with reliability, maintenance, and operations teams to support asset health decisions. Identify opportunities for program improvement and recommend technology enhancements. Continuously pursue certifications and predictive technology mastery through structured coursework and hands-on experience. Immigrant sponsorship is not available for this position. PLEASE NOTE: John H Carter Company is not accepting unsolicited assistance from search firms/employment agencies for this employment opportunity. Please, no phone calls or emails to any employee of John H Carter Company about this opening. All resumes submitted by search firms/employment agencies to any employee at John H Carter Company via-email, the Internet or in any form and/or method without a valid and executed search firm agreement in place for this position will be deemed the sole property of John H Carter Company; no fee will be paid in the event a candidate is hired by John H Carter Company as a result of the unsolicited referral or through other means. If you wish to become an approved agency to assist us in our employment efforts, please submit your request to ***********************.

KSB is a leading supplier of pumps, valves and related service. Our reliable, high-efficiency products are used in applications wherever fluids need to be transported or shut off, covering everything from building services,industry and water transport to waste water treatment, power plant processes and mining. Founded in 1871 in Frankenthal, Germany, the company has a presence on all continents with its own sales and marketing organisations and manufacturing facilities. Around the globe, more than 190 service centres and around 3,500 service specialists are on hand to provide local inspection, servicing, maintenance and repair services under the KSB SupremeServ brand. Innovative technology that is the fruit of KSB's research and development activities forms the basis for the company's success. People. Passion. Performance. It is these three success factors that make KSB the company it is today. At KSB, we recognise that it is people who actually make the difference - the people we employ and the people we serve. This is why we are committed to equal rights and treatment worldwide and never lose sight of the aspects ecology and sustainability when manufacturing our products. OVERVIEW: The Reverse Engineering Drafter will report directly to the Technical Support Manager and be responsible for reverse engineering of parts, assemblies, and the workscopes therein. RESPONSIBILITIES: * Read and understand AutoCAD drawings/sketches and standards * Consult with the engineering team while utilizing design concepts and determining requirements for detailed working drawings * Measuring parts using instruments such as electronic metrology equipment, rulers, calipers, micrometers, gauges, etc. * Collaborate with pump shop employees to gather critical data/information for reverse engineering * Effectively communicate with customer service personnel to ensure updates are provided on job progress and needs/hold points are effectively communicated * Reverse engineering pump parts such as impellers, pump cases, bearing houses, etc. * RFQ basics - details to be checked before drawing, fill and update information * Make assembly models/drawings, check fitment, and ensure proper running clearances * Operate CMM equipment to collecting data for part development * First article casting inspections * Part repair work scope development * RFQ - Assign new drawing number for parts not in our database * Work Orders - check work order, print drawing and assign to right department QUALIFICATIONS: * High School diploma/GED and/or 3+ years of equivalent work experience * Drafting or equivalent technical degree preferred * Desire to grow beyond the current scope of drafter duties and responsibilities * Able to communicate effectively and professionally. Excellent written and oral communication skills. * Previous experience working as a member of a successful team. * Proficiency in Microsoft Office applications including Word, Excel, and PowerPoint * Inventor Cam and Master Cam experience * AutoCAD experience * Reverse Engineering Pump Parts experience KSB Group is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. KSB makes hiring decisions based solely on qualifications, merit, and business needs at the time. We value employees who take the initiative and are committed to our company; Employees who take responsibility and for whom business success is the focus of their actions. In return, we offer fair framework conditions for collective wages and pensions, flexible working time models, individual training opportunities and the best career prospects.

"Together We Make Life Better". Our quality engineering, sustainable solutions and safety record inspire everything we do. Our diverse and inclusive workforce allows all employees to feel valued and safe to give their opinions and improve our company. Tata Consulting Engineers USA, LLC, (TCE), is a multi-disciplinary engineering organization offering a full range of integrated engineering design, project support, procurement and construction management services to the energy and chemicals industries. Position Summary This position is responsible for the development of capital and expense projects with moderate complexity. The candidate shall seek solutions to technical problems, conduct work on assigned tasks, and exhibit a significant level of knowledge and expertise in the mechanical engineering field. The candidate is also responsible for providing project deliverables and driving improvements within their field of expertise through implementation of appropriate engineering tools, technologies, and work processes, both as an individual and as part of a project team. Responsibilities Provide project engineering for capital and expense projects including scope definition, cost estimates, design, specification and ordering of equipment, documentation (drawings, equipment files, etc.), implementation, and startup. Design and implement projects that are engineered for safety, operability, and reliability. Develop and submit capital and expense budgets. Manage capital and expense projects to meet scope, schedule, and cost requirements per the customer. Drive improvements in maintenance work processes, procedures, performance, and cost. Provide mechanical engineering technical support and troubleshooting for plant operating and maintenance departments. Assure compliance with environmental, health and safety (EHS), PSM, local, state, federal and corporate standards. Qualifications Min of 5+ years industry experience in a chemical/petrochemical and/or refinery environment. Proven experience as a successful project management experience. Self-starter who is effectively manages multiple tasks and achieves results with minimal supervision. Excellent communication, team interaction and ability to lead/participate on cross-functional team. Proven understanding of regulatory and industrial standard and codes including ASME. Education Requirements Bachelor's Degree or higher in Mechanical Engineering from an accredited institution. EEO Statement Tata Consulting Engineers USA, LLC ("TCE") is an equal opportunity and affirmative action employer committed to promoting diversity, equity, and inclusion in our workplace. We do not discriminate on the basis of race/ethnicity, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, veteran's status, or any other characteristic protected by local, state, or federal laws, rules, or regulations. In compliance with federal law, all candidates hired will be required to verify their identity and eligibility to work in the United States and to complete the required employment eligibility verification form after acceptance of a formal TCE offer letter through our onboarding system. Fraud Alert Please be aware that there have been instances of fraudulent job offers being made in the name of TCE by unauthorized individuals or organizations. We want to make it clear that TCE will never ask for any type of payment information during our interview process. Please be advised during our company transition, all email communications from TCE will come from our business email addresses, which end in '@tatconsultingengineers.com'. If you receive any suspicious job-related emails from any other domain, please do not respond to them and disregard any requests for personal or financial information. If you have any concerns about the legitimacy of a job offer or communication, please contact us through our website at tataconsultingengineers.com

KSB is a leading supplier of pumps, valves and related service. Our reliable, high-efficiency products are used in applications wherever fluids need to be transported or shut off, covering everything from building services,industry and water transport to waste water treatment, power plant processes and mining. Founded in 1871 in Frankenthal, Germany, the company has a presence on all continents with its own sales and marketing organisations and manufacturing facilities. Around the globe, more than 190 service centres and around 3,500 service specialists are on hand to provide local inspection, servicing, maintenance and repair services under the KSB SupremeServ brand. Innovative technology that is the fruit of KSB's research and development activities forms the basis for the company's success. People. Passion. Performance. It is these three success factors that make KSB the company it is today. At KSB, we recognise that it is people who actually make the difference - the people we employ and the people we serve. This is why we are committed to equal rights and treatment worldwide and never lose sight of the aspects ecology and sustainability when manufacturing our products. OVERVIEW: The Reverse Engineering Drafter will report directly to the Technical Support Manager and be responsible for reverse engineering of parts, assemblies, and the workscopes therein. RESPONSIBILITIES: Read and understand AutoCAD drawings/sketches and standards Consult with the engineering team while utilizing design concepts and determining requirements for detailed working drawings Measuring parts using instruments such as electronic metrology equipment, rulers, calipers, micrometers, gauges, etc. Collaborate with pump shop employees to gather critical data/information for reverse engineering Effectively communicate with customer service personnel to ensure updates are provided on job progress and needs/hold points are effectively communicated Reverse engineering pump parts such as impellers, pump cases, bearing houses, etc. RFQ basics - details to be checked before drawing, fill and update information Make assembly models/drawings, check fitment, and ensure proper running clearances Operate CMM equipment to collecting data for part development First article casting inspections Part repair work scope development RFQ - Assign new drawing number for parts not in our database Work Orders - check work order, print drawing and assign to right department QUALIFICATIONS: High School diploma/GED and/or 3+ years of equivalent work experience Drafting or equivalent technical degree preferred Desire to grow beyond the current scope of drafter duties and responsibilities Able to communicate effectively and professionally. Excellent written and oral communication skills. Previous experience working as a member of a successful team. Proficiency in Microsoft Office applications including Word, Excel, and PowerPoint Inventor Cam and Master Cam experience AutoCAD experience Reverse Engineering Pump Parts experience KSB Group is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. KSB makes hiring decisions based solely on qualifications, merit, and business needs at the time. We value employees who take the initiative and are committed to our company; Employees who take responsibility and for whom business success is the focus of their actions. In return, we offer fair framework conditions for collective wages and pensions, flexible working time models, individual training opportunities and the best career prospects.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning 12,000 strong organization as we fuel the world and each other! Summary: The Mechanical Engineer will provide mechanical engineering expertise with primary emphasis on rotating equipment to ensure reliable operation and perform project engineering functions as required for maintenance and improvement projects. This position will primarily support the Nederland Terminal and its affiliated locations as well as other facilities as needed. The position will be located in Nederland, TX. Responsibilities: * Provide mechanical engineering support to maintenance and operations. * Work with equipment OEMs to resolve issues, perform overhauls, and review spare parts recommendations. * Provide mechanical engineering expertise in the troubleshooting and resolution of equipment failures, the selection and evaluation of plant equipment, and the operation of rotating equipment. * Identify equipment bad actors by working closely with maintenance and operations, monitoring mean time between failures, and reviewing work order history and cost. Perform root cause analysis to identify solutions to eliminate chronic equipment problems. * Work with vibration analysts reviewing data and recommend appropriate corrective action. * Evaluate, recommend, design, and implement modifications to equipment, procedures, and processes to improve the reliability or reduce the cost of the assets * Develop, implement, and evaluate preventive maintenance programs * Recommend and establish spare parts for new and existing equipment. * Prepare equipment specifications and purchase requests. * Maintain equipment repair records and logs - evaluate repair costs and trends. * Assist in developing shutdown budget and scope. * Assist in developing site annual budget for Operation & Maintenance and capital projects. * Oversee major equipment repairs and overhauls. * Evaluates / audits repair shops to ensure quality. * Provide project engineering and management for small capital projects. This includes estimating and submitting project for approval and management of the project through start-up and project closure. * Control project costs by providing budget projections and maintaining a constant awareness of projects status in relation to approve budget. * Instruct maintenance and operations personnel on new equipment and procedures as required. * Assure compliance with federal, state, and local environmental regulations and operating permits. * Actively participates in the site's Health, Environmental, Safety and Security (HESS) programs to assure a safe and environmentally sound workplace. * Complete any additional responsibilities assigned by Management. Required Skills (External) Requirements: * Bachelor's degree in Mechanical Engineering * 0-3+ years of industry experience in maintenance or related field. * Excellent interpersonal skills including the ability to work as part of a team. * Excellent written and verbal communication skills * Strong troubleshooting skills. * Proficient in Microsoft applications (such as Word, Excel, PowerPoint and Outlook). * Ability to work weekends, holidays and respond to callouts on a non-routine basis. * Physical requirements - Must be able to lift 40 lbs, climb ladders and stairs. Walking, bending, stooping is required. Must be able to wear personal protective equipment including the use of a respirator. Must be able to respond to visual and audible alarms. * Ability to obtain a Transportation Workers Identification Card (TWIC) Required experience is commensurate with the selected job level: * The Associate Engineer level requires a Bachelor's degree in an engineering discipline and 0-3 years of relevant job related experience * The Engineer level requires a Bachelor's degree in an engineering discipline and 3-6 years of relevant job related experience Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Normal office working conditions and field work * Must be able to remain in a stationary position 50% of the time due to prolonged periods of sitting or standing. * Occasional overnight travel may be required. * Visits to industrial/manufacturing settings, which may include exposure to various materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment will occur.

Golden Pass LNG, a joint venture of Qatar Energy & ExxonMobil, has an exciting opportunity in Engineering at our Sabine Pass, TX location (approximately 10 minutes from Port Arthur, TX). We are looking for team members that have a proven track record of providing support, have strong intrapersonal and communication skills, and are self-motivated and self-directed to be a part of our transformation from an import facility to the premier LNG exporter in North America. The Machinery Engineer, reporting to the Machinery & Reliability Engineering Supervisor, serves as a technical authority for machinery. This role involves input to maintenance strategies and planning, enhancing system performance utilizing various surveillance tools. Additionally, the Machinery Engineer collaborates within the Company to promote continuous improvement in asset maintenance and operations, ensuring optimal asset availability. This position has responsibilities during the Operations Readiness stage and will phase Operations support after plant start up. The Machinery Engineer will support all rotating equipment within Golden Pass, including the new LNG Plant, Pipeline compression facilities, and the existing Import terminal. Key scope during Operations Readiness stage includes assessing equipment criticality, developing equipment strategies, developing crash plans, developing maintenance programs, and commissioning support. Post LNG plant start up, the Machinery Engineer is expected to continue to support the base business through troubleshooting field issues, conducting failure analysis, initiating facilities modifications based on safety, reliability or production drivers, and shutdown support. 1. Operations Readiness Stage * Lead development of scope of work for specialized service agreements for machinery assets. * Lead selection and development of machinery surveillance tools. * Support developing of necessary work aids and procedures. * Engage with Project Team on deliverables and support during commissioning and start-up activities for pipeline and LNG assets. * 2. Operations Stage * Providing general operations and maintenance support for all machinery trains within the Plant and Pipeline facilities. * Assisting in the development of annual goals, objectives, and stewardship plans. * Program documentation and implementation plans. * Annual work plans for program activities to incorporate into the overall GPLNG annual work plan as part of the budgeting cycle. * Preparing MOCs for the review and endorsement of program deviations. * Supporting Operations and Maintenance to ensure that proper results and completion reports are established for all program activities. * Developing potential alternative or new technologies for deployment with Engineering SMEs. * Stewarding activities including KPIs. * Offering technical support regarding Machinery Integrity Program requirements to Operations owners of machinery equipment. Examples of supportive activities include Developing work scopes for contracted Machinery Integrity Program tasks. * Fitness-for-service evaluations using internal and external SMEs as required. * Participation in machinery-related risk assessments and the development of corrective and mitigating actions. * Contributing to the analysis of failures occurring between program task intervals. * Assisting with the development of machinery strategies. * Maintaining relationships with key vendors and equipment manufacturers for parts, services, and Engineering support. * Support day-to-day surveillance of critical machinery to ensure optimized operation. * Troubleshoot machinery issues in the field and evaluate related alarms. * Initiate machinery modification opportunities to address safety, reliability, or production improvement opportunities. * Identify critical spare and 2-year operating spare parts and determining storage and preservation requirements for machinery equipment. * Support operations in developing operator care programs for machinery assets. * Support facility shutdown activities from planning through field execution and start up. Minimum Requirements Minimum education required of the position: * Bachelor's degree in mechanical engineering or equivalent industry experience Minimum experience required of the position: * 5-10 years of experience in a rotating equipment role at an Oil & Gas facility, including LNG facilities (preferred), refineries, offshore, or gas processing facilities. * Strong knowledge of rotating equipment, in particular heavy duty gas turbines, steam turbines, compressors, large pumps, and vibration monitoring systems. * Knowledge of oil and gas industry codes and practices. * Oil and Gas industry safety standards and requirements. Minimum knowledge, skills and abilities required of the position: * Principles of reliability engineering and preventative maintenance strategies. * Equipment diagnostics, troubleshooting, and failure analysis. * Strong analytical skills for identifying and resolving operational issues. * Capacity to handle complex technical challenges under pressure and effectively communicate problem statements and recommendations to higher leadership. * Familiarity with managing timelines, budgets, and resources for machinery-related projects. * Proficient in coordinating activities across multidisciplinary teams. * Clear verbal and written communication for preparing reports, presentations, and technical documents. * Collaborations with operators, engineers, and vendors. * Analyzing trends from equipment monitoring systems (e.g. vibration, temperature, performance surveillance). * Using data to predict maintenance needs or process improvements. * Ability to adjust to changing operational conditions. * Guiding maintenance teams and younger engineers. * Keeping up with new technologies, materials, and industry practices within the machinery space. * Familiarity with Process Safety Management (PSM) process such as HAZID, HAZOP, What-If analyses. * Participates in the Management of Change process. * Experience facilitating Root Cause Failure Analysis (RCFA) practices to understand the causes for equipment failures / upsets to determine corrective actions for the assets. * Proficient in Microsoft Office Suite (Outlook, Word, Excel, and PowerPoint) Any certificates, licenses, etc. required for the position. * Must hold or be able to obtain and maintain a Transportation Worker Identification Credential (TWIC) for facility access. Working Conditions * Normal field environment Physical Requirements * Field environment physical requirements such as lifting, climbing, walking, standing, kneeling, etc. Other * Not all aspects of the job are covered by the description - may require "other duties as assigned." * Job may change over time in accordance with business needs. * Job description does not guarantee employment.

Salary: About Us Engineering & Inspection Services (EIS) is a multidisciplinary engineering firm offering Engineering & Design, Field Services, Inspection & Mechanical Integrity, and Technology Development. Founded by engineers,EIShas placed engineering at the core of our business since 2000. Our clients in the petrochemistry industry rely on us to exceed their expectations in safety, efficiency, reliability, and sustainability. AtEIS, we bring knowledge, experience, and integrity to every project. With team members across the Gulf South and clients throughout the US, we prioritize the growth and well-being of our employees.EISdevelops leaders at every level, fostering well-equipped and diverse professionals for long-term success.EISis a recognized Top Workplace for 2025 and for the past four years running. Our offices are located in Metairie, Louisiana, and Beaumont, Texas, with a dedicated Inspection Division headquartered in Port Allen, Louisiana. About the Position: Ensure that rotating equipment and accompanying systems meet current best practices and industry standards while optimizing safety, reliability, and maintainability Provide recommendations for improving bad actor equipment and develop/ repair scopes for rotating equipment. Education and Experience Prior experience as a rotating/machinery specialist/technician who can perform the job role as described will be considered Physical Requirements Outside work often requires moderate physical exertion including climbing scaffolding, kneeling, bending, taking field measurements and walking projects Prolonged periods sitting at a desk and working on a computer. Must be able to wear and properly utilize appropriate personal protective equipment (PPE). This includes hardhat, safety glasses, respirators, ear plugs, still toed shoes, or other equipment as required. Must be able to lift up to 30 pounds at times. Please note that this job description is a general outline of expected duties and responsibilities and is not exhaustive. Actual responsibilities may vary based on individual circumstances and business needs. Equal Opportunity Employer: Engineering & Inspection Services, LLC (EIS) is committed to diversity and inclusion in the workplace. We are an equal opportunity employer and prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, and training. EIS makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Provide instrument, controls, and electrical systems engineering support required to maintain all aspects of site instrumentation, controls, and electrical systems. Provide similar function in support of construction projects. Primary Duties /Responsibilities: * Lead electrical and instrumentation projects and/or maintenance work to ensure compliance with the national electrical code and site permits * Participate in the development of project design concepts and criteria * Provide and modify instrument and electrical drawings as needed * Write and/or modify programs used by site programmable logic controllers, programmable drives, human machine interfaces, and distributive control systems * Prepare electrical and instrumentation estimates for projects * Act as a project manager or proposal manager on small, electrical and instrumentation projects * Monitor project progress for technical accuracy and adherence to schedule and budget * Represent respective projects at meetings and conferences * Provide technical support for the facility's instrument and electrical maintenance department Qualifications Education / Experience / Background: * 3 - 5 years of experience in a similar position Knowledge / Skills / Abilities: * Working knowledge of various PLC and computer software packages * Fundamental understanding of the process safety management (PSM) standard is a plus Additional Information Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Build What Matters - Shape the Future of Texas Communities Are you an experienced civil engineer ready to take ownership of technical design and lead projects that directly impact local communities? Join SPI, a 100% employee-owned firm, and bring your skills to public-sector projects across Texas-from water and wastewater systems to roadway, parks, and more. We're seeking a Project Engineer who is technically strong, detail-focused, and ready to support Project Managers in delivering exceptional infrastructure for cities and counties across the state. What You'll Do As a Project Engineer, you'll serve as the technical backbone of your project team. You'll work alongside Project Managers to develop designs, guide junior staff, and contribute to every stage of the project lifecycle-from early concepts to construction closeout. Key responsibilities include: Technical design for public infrastructure projects (water, wastewater, roadways, drainage, parks, etc.) Producing design plans, construction documents, and technical specifications Assisting with studies, reports, permitting, and design development Preparing cost estimates, responding to contractor RFIs, and reviewing pay applications Participating in construction site visits and progress meetings Coordinating tasks and workflow with internal teams and subconsultants Supporting limited project management tasks on contracts under $100,000 Mentoring and reviewing the work of junior engineers and designers Ensuring designs meet applicable codes, regulations, and standards Why Join SPI? Be part of projects that serve real communities and make a visible impact Work in a collaborative environment with seasoned engineers and rising talent Join a 100% employee-owned firm with a strong reputation and a supportive culture Grow your career with leadership opportunities, continuing education, and mentorship Participate in meaningful work that helps engineer a better future Requirements What We're Looking For Bachelor's degree in Civil Engineering or a related discipline Professional Engineer (P.E.) license in Texas or ability to obtain within 6 months 4+ years of experience in civil engineering design and project execution Strong working knowledge of design principles, codes, and permitting processes Experience with public infrastructure projects for municipalities or counties Effective communication and collaboration skills Ability to manage tasks with minimal supervision and take initiative on complex assignments

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Provide instrument, controls, and electrical systems engineering support required to maintain all aspects of site instrumentation, controls, and electrical systems. Provide similar function in support of construction projects. Primary Duties /Responsibilities: Lead electrical and instrumentation projects and/or maintenance work to ensure compliance with the national electrical code and site permits Participate in the development of project design concepts and criteria Provide and modify instrument and electrical drawings as needed Write and/or modify programs used by site programmable logic controllers, programmable drives, human machine interfaces, and distributive control systems Prepare electrical and instrumentation estimates for projects Act as a project manager or proposal manager on small, electrical and instrumentation projects Monitor project progress for technical accuracy and adherence to schedule and budget Represent respective projects at meetings and conferences Provide technical support for the facility's instrument and electrical maintenance department Qualifications Education / Experience / Background: 3 - 5 years of experience in a similar position Knowledge / Skills / Abilities: Working knowledge of various PLC and computer software packages Fundamental understanding of the process safety management (PSM) standard is a plus Additional Information Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Reports To: EIA Technical Lead Duration: Full-Time Perform engineering duties related to identification and managing asset reliability risks that could adversely affect plant or business operations. This broad primary role may be divided into three smaller, more manageable roles: Loss Elimination, Risk Management and Life Cycle Asset Management (LCAM). Position Responsibilities * Serve as a member of cross-functional team to resolve equipment problems, investigate incidents, and improve reliability. * Provide competent coverage for issues concerning site control systems and electrical systems including Distributed Control Systems, Programmable Logic Controls and Supervisory Control, Data Acquisition Systems, electrical substations, UPSs, and the electrical distribution system. * Read and interpret blueprints, technical drawings, schematics, or computer-generated reports. * Works with Project Engineering to ensure the reliability and maintainability of new and modified installations. The Reliability Engineer is responsible for adhering to the Life Cycle Asset Management (LCAM) process throughout the entire life cycle of new assets. * Participates in the development of design and installation specifications along with commissioning plans. Participates in the development of criteria for and evaluation of equipment and technical suppliers and maintenance service providers. Develops acceptance tests and inspection criteria. * Participates in the final check out of new installations. This includes factory and site acceptance testing that will ensure adherence to functional specifications. * Guides efforts to ensure reliability and maintainability of equipment, processes, utilities, facilities, controls, and safety/security systems. * Professionally and systematically defines, designs, develops, monitors, and refines an Asset Maintenance Plan that includes: * Value-added preventive maintenance tasks * Effective utilization of predictive and other non-destructive testing methodologies designed to identify and isolate inherent reliability problems. * Provides input to a Risk Management Plan that will anticipate reliability-related, and non-reliability-related risks that could adversely impact plant operation. * Produce and review preventative maintenance procedures for I&E site equipment. * Develops engineering solutions to repetitive failures and all other problems that adversely affect plant operations. These problems include capacity, quality, cost, or regulatory compliance issues. To fulfill this responsibility the Reliability Engineer applies: * Data analysis techniques that can include Statistical Process Control, Reliability modeling and prediction, Fault Tree Analysis, Weibull Tree Analysis, Six Sigma (6σ) Methodology, Root-cause and Root-Cause Failure Analysis (RCA, RCFA), Failure Reporting, Analysis and Corrective Action System (FRACAS) * Works with Production to perform analyses of assets including asset utilization, overall equipment effectiveness, remaining useful life & other parameters that define operating condition, reliability, and costs of assets. * Develop and maintain reliability improvement/tracking programs for critical assets for mechanical equipment. * Assist in root cause failure analysis on critical equipment failures. * Perform component failure analysis as required. * Review project design packages for proper design regarding reliability, application, and maintenance. * Assist in the development and monitoring of the preventative maintenance program. * Develop, review, and maintain equipment specifications as related to purchasing, installation, operation, and maintenance/repairs. * Develop and implement alterations and revisions to equipment to improve business performance of the operating units. * Provide various reports as needed. * Present a professional image at all times to clients and vendors and maintain a positive reputation for the company. * Assists other Departments and other administrative personnel as necessary. * Initiate and follow through MOCs. * Must be willing to be available 24/7 on short notice to support plant operations. * Must be able to work extended hours during plant outages and emergencies. * Perform other tasks as assigned. Position Qualifications Education, Experience, and/or Training * Bachelor's or higher degree in Electrical, Electronic, Control or Automation Engineering required. * Seven years or more experience preferred. Experience must be as plant owners' employee in a continuous process industry, preferably chemicals or oil refining. Knowledge, Skills, and Abilities * Engineering and Technology - Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services. * Capital projects and expenditures experience. * Commissioning experience is a plus. * Experience in SAP or similar maintenance programs a plus. * Experience with PLC's (Programmable Logic Controllers). * Graphics programming experience (HMI). * Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. * English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. * Design - Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models. * Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance. * Science - Using scientific rules and methods to solve problems. * Complex Problem Solving - identifying complex problems and reviewing related information to develop and evaluate options and implement solutions. * Critical Thinking - using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. * Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one. * Systems Analysis - Determining how a system should work and how changes in conditions, operations, and the environment will affect outcomes. * Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making. * Reading Comprehension - Understanding written sentences and paragraphs in work related documents. * Systems Evaluation - Identifying measures or indicators of system performance and the actions needed to improve or correct performance, relative to the goals of the system. * Operations Analysis - Analyzing needs and product requirements to create a design. * Mathematical Reasoning - The ability to choose the right mathematical methods or formulas to solve a problem. * Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. * Category Flexibility - The ability to generate or use different sets of rules for combining or grouping things in different ways. * Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense. * Inductive Reasoning - The ability to combine pieces of information to form general rules or conclusions (includes finding a relationship among seemingly unrelated events). * Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences. * Written Comprehension - The ability to read and understand information and ideas presented in writing. * Ability to communicate information and ideas in speaking or in writing so others will understand. * Must be self-motivated and possess skills to identify and solve unusual problems. * Must be capable of making decisions and recommendations with minimal supervision. * Must be willing to spend time in the field as required. * Ability to use computers and computer systems utilizing standard software (i.e., Microsoft Suite, AutoCad) Security Clearance Requirements * Transportation Workers Identification Credential (TWIC) Software * Proficiency in Microsoft Office, including Excel, Word, and Outlook required. Physical * Ability to lift 20 lbs. occasionally. * Ability to sit for prolonged amounts of time required. * Ability to effectively communicate through various means required. Work Schedule * Monday - Friday between 8:00am - 5:00pm, working the 9/80 schedule * May work additional hours and days, including weekends and holidays as required. Travel * Less than 10% of the time Apply Now

**Power Your Future with Qualus** as a key member of the Project Management team, the Project Engineer is responsible for the management and coordination of all technical aspects of new power generation capital projects. This role ensures that engineering is aligned with corporate goals and is complete, accurate and constructible for all elements of a project's scope. The Project Engineer oversees contractor's engineering performance and coordinates all contractor and owner's engineering interfaces in addition to ensuring projects are completed according to project construction drawings and in accordance with project specifications, quality and performance requirements. This position is responsible for coordinating efforts of cross-functional teams and building effective relationships with key internal/external stakeholders, including contractors. The Project Engineer is required to work directly with the Project Manager and Project Controls Specialist to ensure process alignment and compliance. **Responsibilities** + Promotes safe behavior, in accordance with Company expectations, and adherence to the safety rules on the project. + Identifies engineered safety controls and hazard removal during engineering design and coaches safe practices in the field. + Supports/Leads cross-functional team consisting of internal Subject Matter Experts, Owners Engineers, EPC Contractors and Technical Consultants from development of EPC contract through Permitting, Engineering, Construction, Commissioning and Closeout. + Ensures documentation of engineering and construction quality is adequately captured to support audit and prudency review. + Supports/Leads Owner team in writing official Records of Decision to capture prudency of major project decisions. + Acts as Contract Manager for various engineering and construction contracts outside of the EPC, including Owner's Engineer. + Performs/Manages the review of engineering design to assure compliance with the contract, permits, codes, and utility standards while ensuring design supports the strategic, operational and maintenance goals of the project. + Coordinates with the Project Manager in following the Project Delivery System and ensuring requirements are met and producing associated deliverables. + Participates in contractor/vendor selection process with a specific goal of assessing engineering experience, competencies and capability. + Supports/Leads technical open book engineering process with contractors during development of major projects and applies value engineering concepts to ensure projects are competitive. + Assists Contractor and Vendors during design and construction to resolve technical queries, and interfaces. + Assures that all firms solicited to provide engineering services are duly licensed in the state of the project. + Assures Project compliance with NERC and Security Standards.Ensures all documents generated on the project are stored in designated repository at closeout. + Supports/Leads/Follows change management process for any potential design changes.Participates in the equipment inspection activities as agreed with the Contractor.Supports/Leads Owner review and signoff of System Turnover packages from Construction to Start-up and from EPC to Owner. + Supports commissioning and ensures performance, reliability and emissions testing are completed per contract **Qualifications** Minimum education required of the position: + Bachelor of Science degree in Engineering or equivalent work experience.Advanced degree preferred. Minimum experience required of the position: + Project Engineer Sr Staff: 10+ years of applicable and progressive professional experience, preferably engineering design, construction or operation of power systems. Minimum knowledge, skills and abilities required of the position: + Excellent technical writing and verbal communication skills with strong computer skills and proficiency in Microsoft Office 360. + Strong interpersonal skills and leadership behaviors. + Expert knowledge of engineering fundamentals within at least one discipline (civil/mechanical/electrical/controls/chemical/construction) + Advanced knowledge of the practical application of engineering science and technology to power generation. This includes applying principles, techniques, procedures, and equipment to the design of electrical power generating facilities. + Knowledge of materials, methods, and the tools involved in the construction or repair of power generation facilities and associated QA/QC protocol. + Knowledge of permits required for construction and operation of power generation facilities. + Experience with reviewing, executing and managing large EPC contracts. + Advanced critical thinking skills and capability to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. + Adept in complex problem solving; able to identify complex problems and review related information to develop and evaluate options and implement solutions. \#LI-MH1 **Benefits & Compensation** Qualus benefits offered include Medical, Dental, Vision, Life Insurance, Short and Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Parental Leave, Paid time off, and Holidays, for those who qualify. The expected compensation range for this position is based upon several factors, including but not limited toeducation, qualifications, prior relevant work experience and work location. **Company Overview** Qualus is a leading pure-play power solutions firm and innovator at the forefront of power infrastructure transformation, with differentiated capabilities across grid modernization, resiliency, security, and sustainability. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange. The firm has over 1,800 professionals, with offices throughout the U.S. and Canada. **EEO** At Qualus, we believe everyone has value; and that the diversity and inclusion among our teams is what sets us apart for optimal success. We put people first because we care. To view a copy of the Qualus Equal Opportunity and Affirmative Action Policy Statement, click here. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process, and need an alternative method for applying, please email **********************. Submit Referral Submit Referral **Job Locations** _US-TX-Orange_ **ID** _2025-4644_ **Category** _Applied Solutions & Program Management_ **Position Type** _Regular Full Time_

Power Your Future with Qualus as a key member of the Project Management team, the Project Engineer is responsible for the management and coordination of all technical aspects of new power generation capital projects. This role ensures that engineering is aligned with corporate goals and is complete, accurate and constructible for all elements of a project's scope. The Project Engineer oversees contractor's engineering performance and coordinates all contractor and owner's engineering interfaces in addition to ensuring projects are completed according to project construction drawings and in accordance with project specifications, quality and performance requirements. This position is responsible for coordinating efforts of cross-functional teams and building effective relationships with key internal/external stakeholders, including contractors. The Project Engineer is required to work directly with the Project Manager and Project Controls Specialist to ensure process alignment and compliance. Responsibilities * Promotes safe behavior, in accordance with Company expectations, and adherence to the safety rules on the project. * Identifies engineered safety controls and hazard removal during engineering design and coaches safe practices in the field. * Supports/Leads cross-functional team consisting of internal Subject Matter Experts, Owners Engineers, EPC Contractors and Technical Consultants from development of EPC contract through Permitting, Engineering, Construction, Commissioning and Closeout. * Ensures documentation of engineering and construction quality is adequately captured to support audit and prudency review. * Supports/Leads Owner team in writing official Records of Decision to capture prudency of major project decisions. * Acts as Contract Manager for various engineering and construction contracts outside of the EPC, including Owner's Engineer. * Performs/Manages the review of engineering design to assure compliance with the contract, permits, codes, and utility standards while ensuring design supports the strategic, operational and maintenance goals of the project. * Coordinates with the Project Manager in following the Project Delivery System and ensuring requirements are met and producing associated deliverables. * Participates in contractor/vendor selection process with a specific goal of assessing engineering experience, competencies and capability. * Supports/Leads technical open book engineering process with contractors during development of major projects and applies value engineering concepts to ensure projects are competitive. * Assists Contractor and Vendors during design and construction to resolve technical queries, and interfaces. * Assures that all firms solicited to provide engineering services are duly licensed in the state of the project. * Assures Project compliance with NERC and Security Standards.Ensures all documents generated on the project are stored in designated repository at closeout. * Supports/Leads/Follows change management process for any potential design changes.Participates in the equipment inspection activities as agreed with the Contractor.Supports/Leads Owner review and signoff of System Turnover packages from Construction to Start-up and from EPC to Owner. * Supports commissioning and ensures performance, reliability and emissions testing are completed per contract Qualifications Minimum education required of the position: * Bachelor of Science degree in Engineering or equivalent work experience.Advanced degree preferred. Minimum experience required of the position: * Project Engineer Sr Staff: 10+ years of applicable and progressive professional experience, preferably engineering design, construction or operation of power systems. Minimum knowledge, skills and abilities required of the position: * Excellent technical writing and verbal communication skills with strong computer skills and proficiency in Microsoft Office 360. * Strong interpersonal skills and leadership behaviors. * Expert knowledge of engineering fundamentals within at least one discipline (civil/mechanical/electrical/controls/chemical/construction) * Advanced knowledge of the practical application of engineering science and technology to power generation. This includes applying principles, techniques, procedures, and equipment to the design of electrical power generating facilities. * Knowledge of materials, methods, and the tools involved in the construction or repair of power generation facilities and associated QA/QC protocol. * Knowledge of permits required for construction and operation of power generation facilities. * Experience with reviewing, executing and managing large EPC contracts. * Advanced critical thinking skills and capability to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. * Adept in complex problem solving; able to identify complex problems and review related information to develop and evaluate options and implement solutions. #LI-MH1 Benefits & Compensation Qualus benefits offered include Medical, Dental, Vision, Life Insurance, Short and Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Parental Leave, Paid time off, and Holidays, for those who qualify. The expected compensation range for this position is based upon several factors, including but not limited to education, qualifications, prior relevant work experience and work location. Company Overview Qualus is a leading pure-play power solutions firm and innovator at the forefront of power infrastructure transformation, with differentiated capabilities across grid modernization, resiliency, security, and sustainability. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange. The firm has over 1,800 professionals, with offices throughout the U.S. and Canada. EEO At Qualus, we believe everyone has value; and that the diversity and inclusion among our teams is what sets us apart for optimal success. We put people first because we care. To view a copy of the Qualus Equal Opportunity and Affirmative Action Policy Statement, click here. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process, and need an alternative method for applying, please email **********************.

The Solar PV Design Engineer will support the layout, drafting, and technical design of utility-scale and commercial solar systems. This associate-level role focuses on preparing construction-ready drawings, conducting site and electrical analysis, and assisting with permitting and interconnection applications. Ideal candidates are proficient in AutoCAD, electrical plan reading, and solar PV components. Key Responsibilities Create PV system layouts, single-line diagrams (SLDs), and wiring schematics Support array layout planning, inverter placement, and trenching routes Use AutoCAD and PVsyst (or similar tools) to produce construction drawings Assist with system sizing, stringing calculations, voltage drop, and shading analysis Coordinate with field engineers, procurement, and permitting teams Ensure designs comply with NEC, local AHJs, utility interconnection, and safety standards Revise drawings based on feedback from engineering, AHJs, and utility companies Maintain document control and support technical submission packages Qualifications Associate degree in Electrical Engineering Technology, Renewable Energy Systems, or related field 2-4 years of experience in PV system design (commercial or utility-scale) Proficient in AutoCAD (required); PVsyst, Helioscope, or SketchUp a plus Basic understanding of solar PV electrical systems, NEC, and interconnection requirements Able to read technical drawings and construction documents Detail-oriented with strong communication and drafting skills Familiarity with permitting, electrical line diagrams, and local utility standards Must be able to work independently and in a team environment Preferred Certifications NABCEP PV Associate or Installer (preferred, not required) AutoCAD or design software certification OSHA 10 or basic site safety training Benefits Competitive hourly wage: $24 - $30/hour, depending on experience Health, dental, and vision insurance 401(k) with employer match Paid time off and holidays Growth opportunities in solar design and engineering

* Client Relationships: Develop and maintain strong relationships with all client personnel, including direct and contract employees. * Technical Expertise: Serve as a SME for rotating equipment, continuously expanding knowledge in this area. * Product Knowledge: Maintain a deep understanding of reliability platforms, especially Emerson's AMS products and services. * Consulting Skills: Apply advanced consulting skills, including risk management, project management, financial analysis, and persuasive communication. * Compliance & Safety: Ensure compliance with all safety regulations and standards, including OSHA. * Regular and predictable attendance is essential for this position. * Collect and analyze machinery condition data using Emerson's and Windrock's suite of tools, hardware, and software. Interpret results in the context of process variables and operational conditions to provide accurate diagnostics and actionable insights for asset health and performance improvement. * Build, manage, and optimize vibration databases for efficient route-based monitoring and long-term asset trending. * Interpret vibration signatures and generate professional technical reports, including recommended corrective actions. * Support proper collection techniques and data transfer processes. * Collaborate closely with reliability, maintenance, and operations teams to support asset health decisions. * Identify opportunities for program improvement and recommend technology enhancements. * Continuously pursue certifications and predictive technology mastery through structured coursework and hands-on experience. Immigrant sponsorship is not available for this position. PLEASE NOTE: John H Carter Company is not accepting unsolicited assistance from search firms/employment agencies for this employment opportunity. Please, no phone calls or emails to any employee of John H Carter Company about this opening. All resumes submitted by search firms/employment agencies to any employee at John H Carter Company via-email, the Internet or in any form and/or method without a valid and executed search firm agreement in place for this position will be deemed the sole property of John H Carter Company; no fee will be paid in the event a candidate is hired by John H Carter Company as a result of the unsolicited referral or through other means. If you wish to become an approved agency to assist us in our employment efforts, please submit your request to ***********************.

About Us Engineering & Inspection Services (EIS) is a multidisciplinary engineering firm offering Engineering & Design, Field Services, Inspection & Mechanical Integrity, and Technology Development. Founded by engineers, EIS has placed engineering at the core of our business since 2000. Our clients in the petrochemistry industry rely on us to exceed their expectations in safety, efficiency, reliability, and sustainability. At EIS, we bring knowledge, experience, and integrity to every project. With team members across the Gulf South and clients throughout the US, we prioritize the growth and well-being of our employees. EIS develops leaders at every level, fostering well-equipped and diverse professionals for long-term success. EIS is a recognized “Top Workplace” for 2025 and for the past four years running. Our offices are located in Metairie, Louisiana, and Beaumont, Texas, with a dedicated Inspection Division headquartered in Port Allen, Louisiana. About the Position: Ensure that rotating equipment and accompanying systems meet current best practices and industry standards while optimizing safety, reliability, and maintainability Provide recommendations for improving “bad actor” equipment and develop/ repair scopes for rotating equipment. Education and Experience Prior experience as a rotating/machinery specialist/technician who can perform the job role as described will be considered Physical Requirements Outside work often requires moderate physical exertion including climbing scaffolding, kneeling, bending, taking field measurements and walking projects Prolonged periods sitting at a desk and working on a computer. Must be able to wear and properly utilize appropriate personal protective equipment (PPE). This includes hardhat, safety glasses, respirators, ear plugs, still toed shoes, or other equipment as required. Must be able to lift up to 30 pounds at times. Please note that this job description is a general outline of expected duties and responsibilities and is not exhaustive. Actual responsibilities may vary based on individual circumstances and business needs. Equal Opportunity Employer: Engineering & Inspection Services, LLC (EIS) is committed to diversity and inclusion in the workplace. We are an equal opportunity employer and prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, and training. EIS makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Launch Your Civil Engineering Career with Purpose Are you an early-career civil engineer looking to make a meaningful impact in Texas communities? At SPI, we're not just designing infrastructure-we're building a better future. As a 100% employee-owned firm, we take pride in shaping the places we live and work. We're hiring a Civil Engineer-in-Training (EIT) to join our team and support a wide variety of municipal projects. From roadways and utility design to parks and public infrastructure, you'll work alongside experienced engineers and grow your skills every step of the way. What You'll Do As a Civil EIT, you'll assist in the planning, design, and delivery of municipal engineering projects while learning from licensed engineers in a collaborative environment. Your responsibilities will include: Preparing construction plans, specifications, and cost estimates Supporting design and analysis for municipal projects (roadways, stormwater, water/wastewater, sanitary sewer, site development, recreation facilities, and more) Conducting field visits and participating in client meetings Developing reports, technical studies, and permitting documents Managing tasks and supporting multiple projects simultaneously Preparing project schedules and assisting with estimates Using software tools like AutoCAD, Civil 3D, and MS Office to complete design tasks Collaborating with project teams to ensure quality and compliance with applicable codes and standards Why SPI? Work on meaningful projects that improve local communities Be part of a supportive, collaborative, and employee-owned firm Gain experience across a range of public-sector infrastructure projects Learn from experienced professionals who invest in your development Grow into leadership with mentorship and continuing education Requirements What We're Looking For Bachelor of Science in Civil Engineering from an accredited university Engineer-in-Training (EIT) certification required 1-4 years of relevant engineering experience Strong attention to detail and organization Effective written and verbal communication skills Familiarity with AutoCAD, Civil 3D, and Microsoft Office Ability to work independently and in a team environment Experience in water and wastewater design is a plus Enthusiasm for learning and growing in a supportive engineering team Start your career with SPI and help us engineer a better future-apply today!