Design engineer jobs in Carmel, IN

Engineered Facades is a high-value provider of architectural building exteriors. Our knowledgeable, dedicated associates work professionally with an exclusive group of vendors and customers in an environment built on commitment and trust. Job Description The Design Manager position at Engineered Facades reports directly to the Director of Design and Engineering. The Design Manager coordinates and exercises functional planning, organization, control, integration and completion of engineering projects within the area of assigned responsibility. Manages the draftsmen and schedules their work. Reviews design for compliance with engineering principles, company standards and contractual requirements, and related specifications. Coordinates activities concerned with technical developments, scheduling and resolving engineering design challenges. Reviews drawings, specifications and related data for accuracy and completeness. Performs technical reviews of shop drawings, FAB tickets and construction administration submittals to ensure air, water, thermal, and structural performance Coordinates facade calculations with third party engineering firm. Analyze structural integrity on basic wall systems without involving third party engineering firm Collaborates with and provide production support to the architectural drafters Works with QA to resolve issues with engineering design problems Uses computer assisted design/drafting equipment and software to develop designs. Creates fab tickets and cut lists for projects Develops design solutions to fit within budget and timeline Requirements Bachelor's degree in Civil Engineering, Structural Engineering or Mechanical Engineering or Building Construction Management or related degree and at least five- ten years' experience in the construction industry. Other skill sets for this position include: Excellent communication skills and organizational skills Knowledge of construction principles, techniques and procedures Proven ability to manage multiple projects and meet deadlines in a timely fashion Strong interpersonal skills and able to work in a team environment Construction related software program knowledge including: Auto-CAD and Autodesk Inventor Experience in Sketch Up Ability to sketch rough layouts, details and computes angles, weights, surface areas, dimensions, radii, clearances, tolerances, etc. Strong organizational and problem solving skills. Proficient mathematical skills. Proficient use of Microsoft Office Suite.

Messer Construction Co. is a construction manager and general contractor that provides leadership for complex commercial building projects. An employee-owned company, Messer builds better lives for its customers, communities, and employees, and delivers value through quality construction and client experiences. Founded in 1932, Messer's footprint has grown to eleven regional offices located across the Midwest and Southeast: Greenville, South Carolina; Charlotte and Raleigh, North Carolina; Columbus, Cincinnati, and Dayton Ohio; Louisville and Lexington Kentucky; Indianapolis, Indiana; and Knoxville & Nashville, Tennessee. What Will You Do: Provide document control including shop drawings, submittals, change orders, progress photos, and daily reports with mechanical/electrical/plumbing focus. Assist with the spatial coordination and assembly of the building information model (BIM) with focus on the mechanical/electrical/plumbing focus. Assist with scheduled construction activities with MEP focus. Support Zero Injury safety program. Support the Quality Leadership System Perform other duties as assigned. What You Will Bring: Bachelor's degree in Mechanical/Electrical Engineering or related field preferred 1-3 years of construction experience (including internships and co-ops) Ability to work non-traditional hours We build where we live, and it shows. When you take charge of your career through professional growth and collaboration, you can't help but feel your impact on the community and the industry. And it's what you can expect at Messer each day. In business since 1932 and employee-owned since 1990, Messer is the commercial construction company committed to building better. Join Messer, where building with purpose is the foundation of everything we do. All Messer employees are required to comply with our Substance Abuse Prevention Policy as a condition of employment. Messer may condition offers of employment upon taking and passing of a post-offer/pre-employment drug screen. Messer Construction Co. does not provide immigration-related sponsorship for this role. Candidates who need employer immigration sponsorship now or in the future will not be considered for this position. Messer is an equal opportunity employer, and all qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, disability status, veteran status, sexual orientation or gender identity.

Top 3 must have's: Deep expertise/hands-on experience in DeltaV design, implementation and testing experience. Automation experience in the pharmaceutical/life science industry, with a preference for API/bulk manufacturing environments. Experience leading cross-functional automation teams. Job description: • Provide support or ownership of the technical scope for their assigned area of the automation project. • Act as an automation representative in cross-functional program leadership meetings, ensuring alignment between automation, process engineering, digital/MES, and quality teams • Serve as the key point of contact for client stakeholders and senior leadership regarding automation scope, progress, and risk mitigation of their assigned area • Collaborate with Program technical offices to ensure the automation solution is aligned with the overall program automation philosophy and standards • Provide technical support to the team working on their area of the project for the respective area/node and ensure that applicable standards are followed • Ensure consistency of the automation deliverables (requirements, functional specifications, control strategies, phases, and recipes, etc.) • Participate in P&ID and lead control strategy design • Lead in defining the software components that need to be created or modified • Communicates progress, issues, and needs to automation project manager for the entire workstream/all areas of the project • Lead input, review, and approve of functional requirements and specifications • Lead design of Parameter and Recipe Specification philosophy • Responding to system integrator technical queries • Lead and collaborate on the development of software testing strategies • Identification of any remediation effort required on process control software • Identify and analyze risks of technical nature particular to the area and planning responses • Maintain compliance with training requirements • Provide training and support to junior engineers and other team members. • Champion the adoption of emerging technologies, tools, and methodologies that improve automation efficiency, reliability, and maintainability.

We are seeking a motivated and detail-oriented Project Engineer to join our dynamic team. The ideal candidate will play a pivotal role in overseeing various construction projects from inception to completion, ensuring that all aspects are executed efficiently and effectively. This position requires strong project management skills, proficiency in construction management software, and a solid understanding of engineering principles. Your responsibilities in this role: Maintain contract documents, posting and distribution of addenda, field orders, RFI's and Requests for Proposal Control shop drawings and submittals to review for contract compliance and establish a routing process to ensure that all involved in the work are kept informed Lead the project QC including all deviation reports, pre-pour inspections, completion lists, testing reports, etc. and actively update the Project Manager and Superintendent Coordinate Requests for Information to and from architectural engineer, owner and other contractors and subcontractors Assist in assembling proposals and prepare owner change order requests Maintain “As-Built” drawings; prepare final close out sets Secure operations manuals guarantee and warranties; assist in project close-out What you need to qualify: 1-3 years of relative job experience in commercial construction highly preferred BS degree in Construction Management or Engineering Thorough understanding of industry practices and standards Strong foundation in database management (ex. Excel) and related industry software (ex. Bluebeam) Highly collaborative work style with excellent communication skills Join us as we build innovative solutions in the construction industry! LRT is proud to be an Equal Opportunity Employer and member of the Drug Free Safety Program.

Required Skills: Must have 7+ years of experience in technical support or desktop support roles Must have strong experience with Windows OS administration (Windows 10/11) Must have familiarity with Office 365 suite (Exchange Online, Teams, SharePoint) Must have experience with Microsoft Entra ID (Azure AD) for identity management Must have a solid understanding of cloud services (user access, connectivity) Must have knowledge of endpoint security tools (antivirus, encryption, patching) Must have knowledge of networking including Cisco routers and switches is ideal Must have excellent troubleshooting and problem-solving skills Must have experience in leading teams and/or the ability to grow into a team leadership role at some point in the future Must have strong communication and customer service orientation Must have experience with Intune or other endpoint management tools Must have experience with PowerShell scripting for automation Must have experience with ticketing systems and change management workflows Must have an understanding of compliance/security frameworks (SOC 2, ISO 27001) Must be able to communicate technical concepts to non-technical people Must have the ability to work independently and prioritize tasks effectively Must be able to configure and deploy Windows-based laptops and desktops for new hires and existing staff Must be able to manage OS updates, patches, and endpoint security tools Must be able to troubleshoot hardware and software issues Must be able to provide Tier 1/Tier 2 support for employees via ticketing system, email, or chat Must be able to resolve issues related to Office 365 (Outlook, Teams, SharePoint, OneDrive) Must be able to support identity and access management through Microsoft Entra (Azure AD) Must be able to assist with user network connectivity to cloud-hosted applications and services Must be able to troubleshoot VPN, Wi-Fi, and network access issues Must be able to escalate complex cloud or infrastructure issues to senior engineers/vendors Must be able to create and manage user accounts in Entra ID (Azure AD) Must be able to handle password resets, MFA setup, and group membership changes Must be able to ensure compliance with security policies and least-privilege access Must have experience maintaining an IT knowledge base and standard operating procedures Must be able to document troubleshooting steps and resolutions for recurring issues Must be able to contribute to continuous improvement of IT support processes Must be able to collaborate with the Managed Service Provider (MSP) to refine processes over time Job/Project Description: This is a great opportunity for a strong Tier 3+ level IT Support professional to work with various business and technical teams within a highly collaborative systems team for a growing organization in the Indianapolis area. This role will focus on end user support with all levels of an enterprise organization including the C level. For anyone with a strong customer service mindset and technical knowledge and the desire to grow into potential leadership opportunities, this is a great opportunity. Beacon Hill is an equal opportunity employer and individuals with disabilities and/or protected veterans are encouraged to apply. California residents: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. If you would like to complete our voluntary self-identification form, please click here or copy and paste the following link into an open window in your browser: ***************************************** Completion of this form is voluntary and will not affect your opportunity for employment, or the terms or conditions of your employment. This form will be used for reporting purposes only and will be kept separate from all other records. Company Profile: Beacon Hill Technologies, a premier National Information Technology Staffing Group, provides world class technology talent across all industries utilizing a complete suite of staffing services. Beacon Hill Technologies' dedicated team of recruiting and staffing experts consistently delivers quality IT professionals to solve our customers' technical and business needs. Beacon Hill Technologies covers a broad spectrum of IT positions, including Project Management and Business Analysis, Programming/Development, Database, Infrastructure, Quality Assurance, Production/Support and ERP roles. Learn more about Beacon Hill and our specialty divisions, Beacon Hill Associates, Beacon Hill Financial, Beacon Hill HR, Beacon Hill Legal, Beacon Hill Life Sciences and Beacon Hill Technologies by visiting ************* Benefits Information: Beacon Hill offers a robust benefit package including, but not limited to, medical, dental, vision, and federal and state leave programs as required by applicable agency regulations to those that meet eligibility. Upon successfully being hired, details will be provided related to our benefit offerings. We look forward to working with you. Beacon Hill. Employing the Future™

Driven by Vision | Industrial-Strength Construction | Powered by Passion Are you looking to work for a successful, stable, and growing company that rewards employees with annual bonuses and exceptional benefits? BMWC is an industrial construction company seeking a Project Engineer to join the team. Are you ready to start your construction career with a leader in the industry that has 70 years of success? This position provides you the opportunity to learn and gain experience while contributing to the delivery of large-scale industrial construction projects. You will be part of a top-performing project team and report to an experienced Project Manager. This highly visible position regularly interacts with project managers, site supervisors, and company operations leaders. Come learn from the best! RESPONSIBILITIES As a Project Engineer, you will: Learn and become proficient in functions within the Project Controls department. Become knowledgeable in the functions of the Estimating department. Learn and be able to perform the functions within the Purchasing and Tool & Equipment. Understand the commercial terms and conditions for projects. Understand and gain exposure to craft labor agreements. Understand and gain exposure to various contract strategies and types. Participate in Construction Operations Meetings. Perform accounting system functions. Actively participate in customer entertainment and develop relationships with customers. Attend Risk Management training to understand levels of risk that the company will accept. Learn to perform safety audits and perform at least one per week. Participate in company Safety Incentive programs and in daily safety planning activities. Participate in Quality Action Teams and actively seek areas where we can improve day to day operations and procedures. Understand the company Marketing Plan and assist in pursuit of projects. Communicate, through the appropriate channels, any observations of noncompliance with the Guiding Principles and Core Values of the company. REQUIREMENTS AND QUALIFICATIONS Bachelor's Degree in Construction Engineering, Construction Management, or a related field is required. We will train an entry level graduate and/or hire an experienced industrial construction project engineer. BENEFITS Competitive Pay with Bonus PTO and paid holidays 401K/Profit Sharing with company match Medical, Dental and Vision Insurance Life, AD&D and Disability benefits Pet Insurance Tuition Reimbursement Paid Volunteer Time Off ABOUT US BMWC tackles the world's toughest and most daunting industrial construction challenges. Our work encompasses an array of industrial sectors, including aerospace, chemical, electric power, food and beverage, oil and gas, pharmaceutical and biotechnology, and semiconductor. As one of the premier specialty construction companies in the country, our employees enjoy a focus on growth and development, work/life balance, and one of the best safety records in the industry. We are 100% management-owned, making our employees' development and advancement paramount to our success.

At Mercor, we're building the talent engine that helps leading labs and research orgs move AI forward. Our latest initiative focuses on benchmarking and improving model performance and training speed across real ML workloads. If you're an early-career Machine Learning Engineer or an ML PhD who cares about innovation and impact, we'd love to meet you. ## What to Expect As a Machine Learning Engineer, you'll tackle diverse problems that explore ML from unconventional angles. This is a remote, asynchronous, part-time role designed for people who thrive on clear structure and measurable outcomes. - **Schedule:** Remote and asynchronous-set your own hours - **Commitment:** ~20 hours/week - **Duration:** Through December 22nd, with potential extension into 2026 ## What You'll Do - Draft detailed natural-language plans and code implementations for machine learning tasks - Convert novel machine learning problems into agent-executable tasks for reinforcement learning environments - Identify failure modes and apply golden patches to LLM-generated trajectories for machine learning tasks ## What You'll Bring - **Experience:** 0-2 years as a Machine Learning Engineer or a PhD in Computer Science (Machine Learning coursework required) - **Required Skills:** Python, ML libraries (XGBoost, Tensorflow, scikit-learn, etc.), data prep, model training, etc. - **Bonus:** Contributor to ML benchmarks - **Location:** MUST be based in the United States ## Compensation & Terms - **Rate:** $80-$120/hr, depending on region and experience - **Payments:** Weekly via Stripe Connect - **Engagement:** Independent contractor ## How to Apply 1. Submit your resume 2. Complete the System Design Session (< 30 minutes) 3. Fill out the Machine Learning Engineer Screen (engineering, and research use Mercor to work on frontier projects shaping the next era of AI.

Job Title: LibertyWorks Mechanical Engineer - Component Design Working Pattern: Full time Working location: Indianapolis, IN/Hybrid (3 days week onsite avg.) We have an exciting opportunity for a Mechanical Engineer of Component Design to join the team in Indianapolis. The LibertyWorks Component Design Engineer shall create engineering solutions that satisfy functional and physical requirements of Products and Sub-Systems. This role is responsible for the on-time delivery and quality of component design definition artefacts i.e. documents, models, definitions that meet system level and sub-system requirements. A LibertyWorks Component Design Engineer requires a desire to work in new and novel solution environments, paving the way for new technology development. You will participate within an IPT and will be responsible for sub-system integration of the technical activities for their design solutions while supporting product realization through the Supply Chain Design. This Component Design Engineer role will work primarily with the components within the major subsystems to design, produce, and test components and mechanical systems for LibertyWorks' products. In this role, the Design Engineer ensures the component definition meets project requirements from concept through to demonstration test. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future, and we need people like you to come and join us on this journey. Rolls-Royce has been recognized as the top employer in the Engineering & Manufacturing category on the prestigious Forbes Top Employers for Engineers list for 2025. This ranking highlights our commitment to innovation, employee development, and fostering a collaborative environment where engineers can thrive. Be part of a team that sets the industry standard and drives groundbreaking solutions. At Rolls-Royce, we are committed to creating a workplace where all employees feel respected, supported, and empowered to do their best work. We foster a welcoming and innovative work environment that invests in you, giving you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. Rolls-Royce is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any protected characteristics. What you will be doing Create component requirements documents for owned hardware and hardware design concepts and perform trade studies to optimize hardware Support creation of detailed drawings and model-based definition and support project/manufacturing to procure conforming hardware Provide limits for engine and rig testing and supporting testing including assessment of test results and tested hardware Orchestrate Technical Review/Design Review and communicate solutions with the project/customer. Develop technical presentations and associated technical reports in the delivery of solutions Perform subsystem and component trade studies for emerging products and architectures Create and review functional and physical interfaces and generate analysis requirements for components Provide input for component level risks and complete DFMEA and risk assessments for owned components. Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviors that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Basic Requirements: Associates Degree in Engineering with 4+ years of related experience; OR Bachelor's degree in Engineering with 2+ years of related experience; OR Masters degree in Engineering; OR JD/PhD in Engineering In order to be considered for this opportunity, you must currently possess or be eligible to obtain and maintain a security clearance, which requires US Citizenship. Preferred Requirements: Experience using computer aided design tools such as NX Experience with Geometric Dimensions and Tolerances (GD&T), and the creation of limit stacks. Experience with generic design processes as well as component specific design guidance. Familiarity with manufacturing processes, engine assembly, and testing. Experience using finite element analysis tools (such as ANSYS) Good communication and presentation skills at all levels of the organization What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. Relocation is available for this role, as applicable. Closing Date: 01/05/2026 Global Grade/Level: GG10 #CLOLI Job CategoryMechanical Systems Job Posting Date09 Dec 2025; 00:12 Pay Range$90,985 - $147,850-Annually Location: Indianapolis, IN Benefits Rolls-Royce provides a comprehensive and competitive Total Rewards package that includes base pay and a discretionary bonus plan. Eligible employees may have the opportunity to enroll in other benefits, including health, dental, vision, disability, life and accidental death & dismemberment insurance; a flexible spending account; a health savings account; a 401(k) retirement savings plan with a company match; Employee Assistance Program; Paid Time Off; certain paid holidays; paid parental and family care leave; tuition reimbursement; and a long-term incentive plan. The options available to an employee may vary depending on eligibility factors such as date of hire, employment type, and the applicability of collective bargaining agreements.

Job Title: Mechanical Design EngineerJob Description Join an innovative startup focused on revolutionizing the Aerospace & Defense industry through 3D printing complex parts and components. The company is at the forefront of developing a 3D printing machine that promises high-precision manufacturing, ultimately offering significant cost savings to OEM customers. With plans to expand into the Automotive and Medical Device sectors, this is an exciting opportunity to be part of a growing team, currently consisting of 10 employees, preparing to start production in a new manufacturing space by June 2025. Responsibilities + Lead the design and development of complex, high-precision equipment including motion control systems, material handling components, and structural assemblies. + Review and approve mechanical drawings to ensure accuracy and compliance with standards. + Conduct structural analysis and finite element analysis (FEA) to validate design integrity. + Apply geometric dimensioning and tolerancing (GD&T) principles in design processes. + Support the engineering team by alleviating workload from key bottlenecks in the design and approval process. Essential Skills + 3+ years of experience in mechanical design and new product development with industrial machinery or applications such as automotive. + Experience with finite element analysis (FEA). + Proficiency in geometric dimensioning and tolerancing (GD&T). + Bachelor's degree in Engineering. Additional Skills & Qualifications + Experience with NX. + Experience with computational fluid dynamics (CFD). Work Environment This position is based onsite in an office environment with an expected schedule of 5 days per week, 8-4 with flexibility on start time. Job Type & Location This is a Contract to Hire position based out of Noblesville, IN. Pay and Benefits The pay range for this position is $48.07 - $70.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Noblesville,IN. Application Deadline This position is anticipated to close on Dec 22, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

V2X Engineering is seeking an entry level Mechanical Engineer to join our Hardware Engineering team in Indianapolis, IN supporting development of a diverse set of mission critical products including advanced airborne systems, podded communication link and sensor systems, armament equipment, suspension and release equipment, cutting edge system integrations, radar systems, cockpit displays, avionics, and more. Our Indianapolis facility also supports a variety of other product lines serving multiple Department of Defense (DoD) customers providing the opportunity to work on a diverse set of programs and roles supporting the continued advancement of your career. The Mechanical Engineer will be responsible for the design of new products and test hardware, as well as the improvement of existing products. The engineer will utilize their mechanical engineering expertise during the proposal and concept generation phase, product development, production, and qualification testing phases of new product design. The engineer will have the opportunity to design creative solutions that meet product requirements. The engineer should be familiar with 3D modeling and drafting, and able be hands-on supporting production, integration, and testing. The engineer will develop solutions which leverage commercial off the shelf (COTS) products paired with custom hardware. The engineer must be a resourceful researcher engaging vendors, manufacturers, and SME's regarding design decisions. The engineer will take part in design reviews at both part, subsystem and system level including Peer Reviews, DFMAs, PDRs, and CDRs. The engineer will work closely with systems, electrical, test, and production engineers. In addition to their technical skills, the ideal candidate leverages strong verbal and written communication to adapt to a wide variety of high-pressure situations while maintaining professionalism and courtesy. We are looking for an engineer that enjoys working on-location, embraces challenges, and has a passion to support our DoD customers and international allies. **Required Skills:** + Must be a US Citizen with ability to obtain a DoD Secret level clearance + Ability to work onsite at our Indianapolis, Indiana facility with an Integrated Product Team being hands on with hardware. + Experience in the design, integration, or testing of mechanical components and assemblies + Familiar with 3-D CAD Modeling Tools (CREO preferred) + Strong planning and organizational skills with ability to be adaptable to changing priorities and assignments + Must be a self-starter, a quick learner, and be able to function in a dynamic environment, and have good time management skills. + Must have strong teaming skills, and good communication skills. + Creative thinking **Desired Skills:** + A minimum of 2 years professional work experience desired to include internships. + Working knowledge of Geometric Dimensioning and Tolerancing, (ASME Y14.5 standards) + Experience capturing key characteristics & requirements for systems + Design, integration, or test experience/understanding of any combination + Airborne podded systems + Airborne armament equipment or alternate mission equipment + Cockpit displays + Avionics + Radar Systems + Mobile Ground Systems + Ground Vehicle Structures + Custom/COTS Electronics including wires, relays, and analog electronics + Design for human factors/safety + Prototyping and agile methodologies + Understanding of manufacturing processes including traditional CNC machining, sheet metal fabrication, mechanical assemblies, water jet, laser, welding, EDM, additive manufacturing, etc. + Understanding of aerospace materials and coatings + Working knowledge of data management systems (Windchill preferred) **Education Requirements:** + Bachelor's Degree in Engineering, or related Science, Technology, Engineering, Mathematics (STEM) degree program **Benefits include the following:** + Healthcare coverage + Retirement plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources _Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans._ Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

V2X Engineering is seeking an entry level Mechanical Engineer to join our Hardware Engineering team in Indianapolis, IN supporting development of a diverse set of mission critical products including advanced airborne systems, podded communication link and sensor systems, armament equipment, suspension and release equipment, cutting edge system integrations, radar systems, cockpit displays, avionics, and more. Our Indianapolis facility also supports a variety of other product lines serving multiple Department of Defense (DoD) customers providing the opportunity to work on a diverse set of programs and roles supporting the continued advancement of your career. The Mechanical Engineer will be responsible for the design of new products and test hardware, as well as the improvement of existing products. The engineer will utilize their mechanical engineering expertise during the proposal and concept generation phase, product development, production, and qualification testing phases of new product design. The engineer will have the opportunity to design creative solutions that meet product requirements. The engineer should be familiar with 3D modeling and drafting, and able be hands-on supporting production, integration, and testing. The engineer will develop solutions which leverage commercial off the shelf (COTS) products paired with custom hardware. The engineer must be a resourceful researcher engaging vendors, manufacturers, and SME's regarding design decisions. The engineer will take part in design reviews at both part, subsystem and system level including Peer Reviews, DFMAs, PDRs, and CDRs. The engineer will work closely with systems, electrical, test, and production engineers. In addition to their technical skills, the ideal candidate leverages strong verbal and written communication to adapt to a wide variety of high-pressure situations while maintaining professionalism and courtesy. We are looking for an engineer that enjoys working on-location, embraces challenges, and has a passion to support our DoD customers and international allies. Required Skills: * Must be a US Citizen with ability to obtain a DoD Secret level clearance * Ability to work onsite at our Indianapolis, Indiana facility with an Integrated Product Team being hands on with hardware. * Experience in the design, integration, or testing of mechanical components and assemblies * Familiar with 3-D CAD Modeling Tools (CREO preferred) * Strong planning and organizational skills with ability to be adaptable to changing priorities and assignments * Must be a self-starter, a quick learner, and be able to function in a dynamic environment, and have good time management skills. * Must have strong teaming skills, and good communication skills. * Creative thinking Desired Skills: * A minimum of 2 years professional work experience desired to include internships. * Working knowledge of Geometric Dimensioning and Tolerancing, (ASME Y14.5 standards) * Experience capturing key characteristics & requirements for systems * Design, integration, or test experience/understanding of any combination * Airborne podded systems * Airborne armament equipment or alternate mission equipment * Cockpit displays * Avionics * Radar Systems * Mobile Ground Systems * Ground Vehicle Structures * Custom/COTS Electronics including wires, relays, and analog electronics * Design for human factors/safety * Prototyping and agile methodologies * Understanding of manufacturing processes including traditional CNC machining, sheet metal fabrication, mechanical assemblies, water jet, laser, welding, EDM, additive manufacturing, etc. * Understanding of aerospace materials and coatings * Working knowledge of data management systems (Windchill preferred) Education Requirements: * Bachelor's Degree in Engineering, or related Science, Technology, Engineering, Mathematics (STEM) degree program Benefits include the following: * Healthcare coverage * Retirement plan * Life insurance, AD&D, and disability benefits * Wellness programs * Paid time off, including holidays * Learning and Development resources * Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

V2X Engineering is seeking an entry level Mechanical Engineer to join our Hardware Engineering team in Indianapolis, IN supporting development of a diverse set of mission critical products including advanced airborne systems, podded communication link and sensor systems, armament equipment, suspension and release equipment, cutting edge system integrations, radar systems, cockpit displays, avionics, and more. Our Indianapolis facility also supports a variety of other product lines serving multiple Department of Defense (DoD) customers providing the opportunity to work on a diverse set of programs and roles supporting the continued advancement of your career. The Mechanical Engineer will be responsible for the design of new products and test hardware, as well as the improvement of existing products. The engineer will utilize their mechanical engineering expertise during the proposal and concept generation phase, product development, production, and qualification testing phases of new product design. The engineer will have the opportunity to design creative solutions that meet product requirements. The engineer should be familiar with 3D modeling and drafting, and able be hands-on supporting production, integration, and testing. The engineer will develop solutions which leverage commercial off the shelf (COTS) products paired with custom hardware. The engineer must be a resourceful researcher engaging vendors, manufacturers, and SME's regarding design decisions. The engineer will take part in design reviews at both part, subsystem and system level including Peer Reviews, DFMAs, PDRs, and CDRs. The engineer will work closely with systems, electrical, test, and production engineers. In addition to their technical skills, the ideal candidate leverages strong verbal and written communication to adapt to a wide variety of high-pressure situations while maintaining professionalism and courtesy. We are looking for an engineer that enjoys working on-location, embraces challenges, and has a passion to support our DoD customers and international allies. Required Skills: Must be a US Citizen with ability to obtain a DoD Secret level clearance Ability to work onsite at our Indianapolis, Indiana facility with an Integrated Product Team being hands on with hardware. Experience in the design, integration, or testing of mechanical components and assemblies Familiar with 3-D CAD Modeling Tools (CREO preferred) Strong planning and organizational skills with ability to be adaptable to changing priorities and assignments Must be a self-starter, a quick learner, and be able to function in a dynamic environment, and have good time management skills. Must have strong teaming skills, and good communication skills. Creative thinking Desired Skills: A minimum of 2 years professional work experience desired to include internships. Working knowledge of Geometric Dimensioning and Tolerancing, (ASME Y14.5 standards) Experience capturing key characteristics & requirements for systems Design, integration, or test experience/understanding of any combination Airborne podded systems Airborne armament equipment or alternate mission equipment Cockpit displays Avionics Radar Systems Mobile Ground Systems Ground Vehicle Structures Custom/COTS Electronics including wires, relays, and analog electronics Design for human factors/safety Prototyping and agile methodologies Understanding of manufacturing processes including traditional CNC machining, sheet metal fabrication, mechanical assemblies, water jet, laser, welding, EDM, additive manufacturing, etc. Understanding of aerospace materials and coatings Working knowledge of data management systems (Windchill preferred) Education Requirements: Bachelor's Degree in Engineering, or related Science, Technology, Engineering, Mathematics (STEM) degree program Benefits include the following: Healthcare coverage Retirement plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

Job Description RFA Engineering (*************** is an engineering service provider dedicated to delivering our clients with timely engineering support and expertise. We are seeking an Entry Level candidate to become an integral part of our engineering team. The selected candidate will work with an experienced engineering staff using state-of-the-art engineering tools & processes. This position will operate onsite at our customer's world-class engineering and manufacturing facility. This is a full-time position with a full benefit package listed below that includes opportunities for professional growth, direct hire by our customers, and additional opportunities within our own organization. Entry Level Mechanical Design Engineer The selected candidate will work with an experienced engineering staff in the development of large diesel or gas engine sub-systems. Work will include product design, product improvement, cost reduction, and product health in large engine systems. The work will be highly collaborative with both internal customers and external suppliers. Responsibilities Product development in the diesel and natural gas engine industry. Focusing on component and systems validation of diesel or gas engines. Build support for engines in the oil and gas industries. Working with component support teams, validation teams, factory operations, application and installation and customer service teams as needed to ensure robust product solutions. Working with internal teams to source components to new foundries. Travel to visit suppliers. Manage product quality projects, defining root cause and solution implementation. Manage Continuous Product Improvement projects using Six Sigma principles. Communication with suppliers and customers on product selection and integration. Use of Creo and Teamcenter to support 3-D Modeling of components. Requirements BSME, BSMET or equivalent degree with experience. Entry level candidates and experience candidates will be considered. Strong mechanical aptitude demonstrated through work experience or hobbies. Excellent communication both written and verbal. Demonstrated ability to meet deadlines and commitments. Strong analytical, problem solving and troubleshooting skills. Ability to thrive in a team environment. Ability to travel (less than 10% of time). Desired Attributes Experience with the APQP (Advanced Product Quality Planning) process. Experience in 3-D Modeling Software; Creo preferred Previous experience with Teamcenter or other PDM software. Experience with manufacturing processes. Design experience or exposure to off-road mobile equipment or engines. Experience with shop or factory support. Desire to work in an engineering environment focusing on robust & cost effective design. Visa sponsorship is NOT available for this position. Pay Range: $65,000-$75,000 - Commensurate with experience About RFA Engineering RFA Engineering has provided product development and engineering services to industry leading customers since 1943. Our primary focus is the development of off highway equipment including agricultural, construction, mining, recreational, industrial, and special machines. Our work includes concept development, product design, documentation, problem-solving, simulation, optimization, and testing of components, systems and complete machines. Our engineering staff is located at our Engineering Center in Minneapolis, branch office in Dubuque, IA, and at numerous customer sites throughout the U.S. Competitive Benefits Health and Dental Insurance TelaDoc Healthiest You Supplemental Vision Insurance Company Paid Life Insurance Company Paid Long-Term Disability Short-term Disability Retirement Savings Account (Traditional 401k & Roth 401k) Flexible Spending Plan Dependent Care HSA for Medical Expenses Bonus Plan (Exempt Employees Only) Paid Time Off (PTO) Paid Holidays Bereavement Leave Employee Assistance Programs (EAP) Education Assistance Equal Opportunity and Veteran Friendly

Engineered Wood Products Designer - Indianapolis, IN Build your career at Tri-State! Tri-State Forest Products is a family owned and operated business. Tri-State is the leading wholesale building materials distributor in the Mid-West with 10 locations in Ohio, Indiana, Michigan, Kentucky and Tennessee specializing in engineered wood products. For over 30 years we've been providing our brand of personal service accompanied with high quality products to the Tri-State market areas. If you want to feel appreciated and valued while working with a great team, Tri-State is the place to be. Job Summary: The EWP designer position is a full-time time position working at our Indianapolis branch. They design residential and light commercial engineered wood floor and roof systems. This designer will work closely with the retail lumber dealer and their builder. Individual will report to the head of the EWP department. Product training is provided. Responsibilities: Work directly with the design team Design engineered wood products such as I-joist, wood beams and connectors into residential and commercial blueprints. Provide customer support answering questions about personal designs and/or other team member designs. Identify and recommend the best products to customers for their specific job application. Utilize provided design software to interpret residential and commercial blueprints into structural placement estimate plans. Respond to customer and associate inquiries as needed to sell, train, and support engineered wood products. Qualifications: Basic knowledge of architecture and/or CAD Systems Strong math skills Strong written and oral communication skills Must be well organized and good at multi-tasking Outgoing and professional personality, with a “can do” attitude Team player Benefits: Medical & Prescription coverage Dental & Vision Coverage Hospital & Accident Coverage Company Paid Basic Life Insurance (Employee, Spouse, & Children) Company Paid Short-Term & Long-Term Disability Additional Group Life Insurance Paid Time Off (Immediately Available Upon Hire) Holiday Pay Traditional & Roth 401k Options w/ annual company match Employee Referral Program **This job description is intended to describe the general nature and level of the work being performed by the individuals assigned to this job. This is not an exhaustive list of all duties and responsibilities. Management reserves the right to amend and change the duties and responsibilities of this job to meet business and organizational needs as necessary. **Tri-State is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran's status, or, any other protected characteristic.

Please, review and apply for this position through the QCI system following the link below (Copy and Paste): http://jobs.qcitech.com/jobseeker/Product_Design_Eng_J02157349.aspx *You can apply through Indeed using mobile devices with this link. Additional Information

At Lilly, we unite caring with discovery to make life better for people around the world. We are a global healthcare leader headquartered in Indianapolis, Indiana. Our employees around the world work to discover and bring life-changing medicines to those who need them, improve the understanding and management of disease, and give back to our communities through philanthropy and volunteerism. We give our best effort to our work, and we put people first. We're looking for people who are determined to make life better for people around the world. Organization Overview As part of Corporate Engineering, the Global Robotics Program (GRP) is responsible for the design, delivery, and oversight of robotic applications across all Lilly manufacturing sites around the globe. This includes testing new technologies, delivering proof of concepts, designing robotic systems, and deploying site robotic systems in partnership with site resources. Core Responsibilities Lead the effective deployments and Commissioning & Qualification efforts of robotic systems by working in multi-disciplinary teams within manufacturing sites, quality, and other business units. Work with vendors to solve, shakedown, and oversee Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) activities. Develop capabilities in robotics and PLC programming to effectively troubleshoot design and/or functional issues at manufacturing site and/or vendor locations. Author and/or Review site documentation (ie: test cases, design documents) for assigned robotic systems deployed to sites. Work closely with the Robotics Platform Owner to support the design of robotic systems. Be a champion for safety, compliance, and quality best practices when delivering robotic systems to manufacturing sites. Support GRP lab activities and application development in areas including robotic system design, 2D and 3D vision development, robot code development, , augmented / virtual reality simulation, and augmented / virtual reality simulation. Provide technical mentoring to Lilly engineers related to the deployment and utilization of robotic technologies, including serving as a Peer Coach to new robotics engineers in the department. Other Responsibilities Work with Global Facilities Delivery (GFD), GRP Platform Owners, and manufacturing sites to support profiling new robotic systems or technologies. Support the development of Engineering Best Practices and Engineering Standards for robotic application development. Participate in multi-functional teams within manufacturing, quality, and other business units when developing new robotic systems. Basic Qualifications: Bachelor's or masters in an engineering field Ability to travel (50%) domestically and/or internationally up to 1-2 weeks per month Minimum 5 years of relevant manufacturing experience, preferably in discrete pharmaceutical manufacturing: parenteral filling and/or inspection processes device assembly or packaging processes additional industries may be considered such as automotive, or other high-speed manufacturing processes Experience in Automation Controls, Mechanical Assemblies for highly automated systems Experience in Project Delivery, Commissioning & Qualification, Validation Activities, and cGMP Regulations Experience in control system troubleshooting, programming, and integration with PLC (Rockwell Studio5000), HMI/SCADA (FactoryTalk View Studio SE), Fanuc Robotics, 3DV, and Cognex vision systems. Additional Skills/Preferences: Knowledge in AutoCAD and SolidWorks Proven ability to communicate effectively to customers, business partners, and staff including good oral, written, and visual presentations Demonstrated ability to use and implement various tools, systems, and processes resulting in improved operational excellence Proficiency in working cross-functionally to deliver on highly complex tasks that may have aggressive timelines Demonstrated ability to work within and lead diverse, cross-functional teams (engineering, manufacturing, operations, tech scientists, quality, etc.) Demonstrated ability to interpret and apply solutions to different situations by understanding customer needs and/or applying strong problem-solving skills Additional Information: Significant domestic and international travel will be required Will require work in a construction and manufacturing environment; safety equipment and/or gowning may be required This is NOT a remote position Lilly is dedicated to helping individuals with disabilities to actively engage in the workforce, ensuring equal opportunities when vying for positions. If you require accommodation to submit a resume for a position at Lilly, please complete the accommodation request form (******************************************************** for further assistance. Please note this is for individuals to request an accommodation as part of the application process and any other correspondence will not receive a response. Lilly is proud to be an EEO Employer and does not discriminate on the basis of age, race, color, religion, gender identity, sex, gender expression, sexual orientation, genetic information, ancestry, national origin, protected veteran status, disability, or any other legally protected status. Our employee resource groups (ERGs) offer strong support networks for their members and are open to all employees. Our current groups include: Africa, Middle East, Central Asia Network, Black Employees at Lilly, Chinese Culture Network, Japanese International Leadership Network (JILN), Lilly India Network, Organization of Latinx at Lilly (OLA), PRIDE (LGBTQ+ Allies), Veterans Leadership Network (VLN), Women's Initiative for Leading at Lilly (WILL), en Able (for people with disabilities). Learn more about all of our groups. Actual compensation will depend on a candidate's education, experience, skills, and geographic location. The anticipated wage for this position is $63,000 - $165,000 Full-time equivalent employees also will be eligible for a company bonus (depending, in part, on company and individual performance). In addition, Lilly offers a comprehensive benefit program to eligible employees, including eligibility to participate in a company-sponsored 401(k); pension; vacation benefits; eligibility for medical, dental, vision and prescription drug benefits; flexible benefits (e.g., healthcare and/or dependent day care flexible spending accounts); life insurance and death benefits; certain time off and leave of absence benefits; and well-being benefits (e.g., employee assistance program, fitness benefits, and employee clubs and activities).Lilly reserves the right to amend, modify, or terminate its compensation and benefit programs in its sole discretion and Lilly's compensation practices and guidelines will apply regarding the details of any promotion or transfer of Lilly employees. #WeAreLilly

Description Looking for your next big opportunity? We're always building relationships with top talent for this vital role. Apply today-our team is reviewing applications and eager to connect!Join us in making an impact on Construction as a Project Engineer! Why Thompson Thrift? At Thompson Thrift, we don't just build properties; we craft communities and shape futures. Our core values drive us to positively impact our team and the communities we serve through initiatives like TT Serve, which supports community outreach and personal development. We also prioritize work-life balance with our Family Impact Program, offering flexible work options, concierge medical services, financial planning, and more to support your well-being and connections with loved ones. Your Role as Construction Project Engineer As the Construction Project Engineer, you'll be an integral member of our construction team, collaborating closely with the Project Manager to ensure the successful execution of multifamily construction projects. Your role will involve coordinating project activities, managing documentation, interpreting plans, and upholding the highest standards of quality and efficiency. Key Responsibilities Documentation Management: Assist in punch list management, review invoices, and maintain essential project documentation. Quality Assurance: Ensure quality control and adherence to safety standards throughout the project lifecycle. Financial Analysis: Support budget management and conduct financial reviews to ensure project adherence to financial goals. Plan Interpretation: Accurately interpret and communicate project plans to subcontractors to ensure compliance with specifications. Our Ideal Candidate Minimum Education: Degree in Construction Management or related field is required. Minimum Experience: Prior construction Experience of 1-2 years is preferred. Skills: Strong communication and interpersonal skills. Attributes: Ability to problem-solve and manage multiple tasks simultaneously. Willingness to travel to projects as needed. Compensation and Benefits Competitive Compensation: Attractive salary with potential for profit-sharing bonus. Comprehensive Benefits: Health, life, and disability insurance; 401(k) with company match; complimentary health clinic access. Work-Life Balance: Generous paid time off, 10+ paid holidays, flexible work culture with Work-From-Anywhere opportunities, and new parent leave. Exclusive Perks: Shipt grocery delivery membership, $100 monthly contribution to Forma Lifestyle Spending Account, team member discount program, company events. Professional Development: Access to educational courses, training programs, and career growth opportunities in a dynamic construction environment. Community Engagement: Participate in TT Serve community outreach initiatives.

Applicants must be authorized to work in the U.S.; Sponsorship is not available for this position at this time." Your Role on Our Team: The Manufacturing Engineer is responsible for providing production support as well as managing multiple moderate to highly complex projects. Individuals in this position will provide project management and necessary technical direction to assure successful and timely production concerns/issues resolved. You'll be DISRUPTIVE through these duties and responsibilities: Support production operations through troubleshooting problems, supporting maintenance, and ensuring equipment is in control. Work on continuous improvement projects to increase productivity, including any skills as related to project management and vendor relationships. Statistical process control to define problems and present quick applicable solutions to key stakeholders to implement change. Create and update operational method sheets (OMS) and related documentation and ensure they are current, accurate and understood by the team. Understanding of manufacturing quality systems and how to implement corrective actions and 8D's. Lead projects by working with cross functional resources to develop and implement new manufacturing processes and automated solutions for Service Operations Ability to conceptualize and work with integrators to develop solutions for manufacturing processes. Compile information and data to utilize in determining a business case for manufacturing operations. Responsible for the completion of assigned operations projects within budgetary and scheduling guidelines. Tracks project schedule to ensure adherence to timelines. Consistently visualizes entire scope of a project with minimal guidance. Identify project risks and implement risk reduction plans. Participate in Kaizen and project engineering within the facility. The TOOLS you'll bring with you: Bachelor of Science Degree in Mechanical or Industrial Engineering. Master's Degree preferred. Minimum 3+ years experience in manufacturing processes. Supervisory experience helpful. Proficient in Microsoft office platforms (Excel, PowerPoint, Word, PowerBI, etc) Proficient in Microsoft Visio/Lucid flow charts Proficient in AutoCad Ability to create Standard work, layered process audits, time observations/line balancing Experience successfully managing medium-high complexity projects Must possess a high level of Operations aptitude Excellent problem-identification and resolution skills Ability to work hands-on with the equipment if needed Statistical data analysis, risk analysis, flow layout and other related engineering tools Must have excellent verbal and written communication, organizational, time management and interpersonal skills. Must have high level of self-initiative and have proven "start-to-finish" project management skills. Computer knowledge and skills required. We provide these great perks and benefits: Robust health, dental and vision insurance plans Generous 401 (K) savings plan Education assistance On-site fitness center And many more, check out our benefits site HERE. Milwaukee Tool is an equal opportunity employer.

Acuity Inc. (NYSE: AYI) is a market-leading industrial technology company. We use technology to solve problems in spaces, light and more things to come. Through our two business segments, Acuity Brands Lighting (ABL) and Acuity Intelligent Spaces (AIS), we design, manufacture, and bring to market products and services that make a valuable difference in people's lives. We achieve growth through the development of innovative new products and services, including lighting, lighting controls, building management solutions, and an audio, video and control platform. We focus on customer outcomes and drive growth and productivity to increase market share and deliver superior returns. We look to aggressively deploy capital to grow the business and to enter attractive new verticals. Acuity Inc. is based in Atlanta, Georgia, with operations across North America, Europe and Asia. The Company is powered by approximately 13,000 dedicated and talented associates. Visit us at ****************** Job Summary The Indiana Production Facility (IPF) is Acuity Brands' largest manufacturing site in the USA. The facility is located about 45 minutes west of Indianapolis in the small town of Crawfordsville, Indiana, in the middle of Montgomery County. Love the outdoors as much as we do? Then you'll enjoy the surrounding parks including Turkey Run and Shades State Park or renting canoes at Clements Canoes Outdoor Center. These scenic locations are perfect for boating, fishing, hiking, camping and picnicking. You can also visit a local sporting event at Wabash College or make the short 30-minute drive to DePauw or Purdue Universities for more. The Manufacturing Engineer performs a variety of mechanical and electrical engineering work in the planning and design of products, tools, machines, and manufacturing processes. You will work with other engineering disciplines in the development of new products to increase production quality and efficiency. You will provide production support through the resolution of equipment related issues for purchased or in-house manufactured tooling. Note: This position will work the following schedule, Monday to Friday: 8am - 5pm Relocation assistance available Key Tasks & Responsibilities (Essential Functions) * Responsible for collecting and reviewing production data from production cells to ensure implemented process improvements are sustained. * Identify and support production quality processes and procedures to increase production throughput and eliminate impact to the customer. * Participate, lead, and facilitate kaizen events to improve internal LEAN manufacturing (ABS) processes to increase production's efficiency and quality. * Train production operators on lean principles and manufacturing processes to increase production's efficiency and quality. * Lean Cell Design. * Work with Cross-Functional teams in the planning and designing of new products to ensure their manufacturability. * Research and review industry trends and technological advancements for products and processes. Experience (minimum experience required) * Bachelor's Degree in Mechanical, Electrical or Industrial Engineering or Engineering Technology Degree required * 1 to 5 year's experience in manufacturing would be a plus * Experience and Foundational Knowledge of Lean Principles, Lean Cell Design, and demonstrated ability in continuous improvement * Knowledge of engineering concepts and principles - Design for Manufacturability, Failure Mode and Effects Analysis, Design/Process Control Methods * Proficient Computer and Analytical Skills Physical Requirements * Medium work * Exerting up to 50 pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects * Note: This position spends a substantial amount of time on the manufacturing floor (approximately 50% or greater per day) Travel Requirements * 1-20% #LI-LM1 We value diversity and are an equal opportunity employer. All qualified applicants will be considered for employment without regards to race, color, age, gender, sexual orientation, gender identity and expression, ethnicity or national origin, disability, pregnancy, religion, covered veteran status, protected genetic information, or any other characteristic protected by law. Please click here and here for more information. Accommodation for Applicants with Disabilities: As an equal opportunity employer, Acuity Inc. is committed to providing reasonable accommodations in its application process for qualified individuals with disabilities and disabled veterans. If you have difficulty using our online system due to a disability and need an accommodation, you may contact us at **************. Please clearly indicate what type of accommodation you are requesting and for what requisition. Any unsolicited resumes sent to Acuity Inc. from a third party, such as an Agency recruiter, including unsolicited resumes sent to an Acuity Inc. mailing address, fax machine or email address, directly to Acuity Inc. employees, or to Acuity Inc. resume database will be considered Acuity Inc. property. Acuity Inc. will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. Acuity Inc. will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. This includes any Agency that is an approved/engaged vendor, but does not have the appropriate approvals to be engaged on a search. E-Verify Participation Poster e-verify.gov eeoc.gov Nearest Major Market: LaFayette Job Segment: Facilities, Machinist, Manufacturing Engineer, Electrical Engineering, Electrical, Operations, Manufacturing, Engineering