Design engineer jobs in Citrus Heights, CA - 453 jobs

SALARY: $80,000-$150,000+ (depending on experience) The Mechanical & Plumbing Engineer provides technical leadership, design services, and engineering coordination in support of estimating, preconstruction, project management, detailing, fabrication, and field operations. This role is responsible for developing cost-effective, code-compliant, energy-efficient, and constructible mechanical and plumbing systems that align with company standards, protect project scope and budget, and support successful project execution across all delivery methods, with a strong emphasis on design-build work . REQUIREMENTS: Professional Engineer (PE) license in Mechanical Engineering. 5+ years of experience in mechanical engineering design. Proven ability to design projects independently and manage multiple assignments. Strong background in plumbing and mechanical systems. Experience with design-build projects, ranging from unit change-outs to full ground-up builds. Ability to work on large TI (Tenant Improvement) projects and new building construction. DUTIES & RESPONSIBILITIES 1. Design cost-effective, energy-efficient mechanical and plumbing systems that meet client requirements, budget constraints, and company standards. 2. Provide complete, code-compliant system layouts, drawings, specifications, and engineering narratives for all project delivery methods. 3. Perform system calculations including loads, sizing, pressure drops, and energy analysis. 4. Maintain current knowledge of applicable mechanical, plumbing, energy, and building codes, including AHJ requirements. 5. Participate in energy evaluations, payback analyses, and sustainability initiatives (including LEED support where applicable). 6. Support estimating with design-build concepts, system layouts, technical clarifications, and engineering narratives. 7. Review plans and specifications for scope completeness, constructability, risks, and opportunities. 8. Review and validate proposed substitutions and “equals” prior to bid submission and document approved alternatives. 9. Assist estimating and project management with obtaining complete, compliant mechanical equipment quotes, including coordination with manufacturers' representatives. 10. Maintain a clear understanding of project scope, estimated cost, design budget, risks, and optimization opportunities. 11. Collaborate with detailing, fabrication, and field teams to ensure constructability and early system optimization. 12. Participate in project kickoff meetings, coordination meetings, and strategic planning sessions. 13. Provide technical support to project management and detailing teams on both design-build and plan/spec projects, including drawing interpretation and RFI production and review. 14. Participate in and oversee system optimization efforts throughout construction. 15. Support PlanGrid (or equivalent platform) population and maintenance in accordance with company procedures. 16. Prepare permit-ready, budget-compliant design drawings and documentation for design-build and special projects. 17. Coordinate with AHJs to obtain permits and resolve permitting issues, including in-person permit acquisition when required. 18. Support inspections and address code or compliance comments as necessary. 19. Develop and maintain professional working relationships with clients, vendors, suppliers, subcontractors, unions, and AHJs. 20. Manage external engineering and detailing resources when outsourced, including defining scope, schedule, and deliverables in coordination with project management. 21. Support equipment procurement and technical coordination throughout the project lifecycle. 22. Maintain and update company mechanical, plumbing, and engineering standards and specifications. 23. Participate in the annual refresh of company construction and design standards. 24. Apply lessons learned from completed projects to improve future designs and processes. 25. Collaborate across departments to continuously improve design quality, constructability, and efficiency. 26. Maintain professional conduct and effective communication with all internal and external stakeholders. 27. Report to work on time and maintain an excellent attendance record. 28. Execute all duties and responsibilities in a professional manner. 29. Comply with all company policies, procedures, and the Employee Handbook. 30. Perform other duties as assigned by Engineering Leadership, Preconstruction, or Executive Management.

Job Responsibilities: The Project Engineer at FLINT supports the Project Manager and Project Superintendent to facilitate a well-managed project. The Project Engineer assists with the overall management and administration of projects including pre-construction services, estimating, subcontractor management, RFIs, submittal process, CORs, and SCOs. Responsibilities include: Drafting and reviewing subcontracts and purchase orders Thoroughly reviewing project documents and familiarizing with project participants Representing the company in project meetings Determining submittal requirements and maintaining the submittal log Assisting in developing and maintaining project schedules Conducting regular site visits to ensure proper construction and adherence to schedule Administering As-Built drawings Handling project correspondence and documentation Obtaining necessary permits and ensuring timely receipt of record documents Assisting in administering the Punch List Performing additional duties as assigned Job Requirements, Qualifications, Characteristics: FLINT is seeking an experienced Project Engineer with 1+ years of experience to perform project management functions on small projects ( Good grasp of construction terminology and activities Understanding of all trades including MEP and building permit process Ability to estimate CORs, assist in bidding, and assemble project estimates Familiarity with cost control and management processes Basic understanding of prime contract types and delivery methods Proficiency in project documentation, scheduling, safety practices, and technology tools (Fieldview, Viewpoint, Team VPT1, Bluebeam, Pype, GCPay, P6, and Vista) Skills in business development and maintaining customer relations Understanding of fee enhancement, risk mitigation, and client management Ability to mentor team members and promote teamwork and cooperation

The Truckee area Project Engineer is responsible for ensuring administrative, contractual, financial and technical aspects of the assigned project(s) being executed. Project Engineer will be reporting to the Project Manager and/or Superintendent. Job Responsibilities includes (but may not be limited to): Assists Project Manager and Superintendent in the management of construction projects, which involves cost control, expediting, quantity take-off, scheduling and safety. Develop peer constructability review of design documents. Develop, input and update project schedule as directed. Assist with the coordination, development and accuracy of the project estimate, budget, revisions, cost coding, and prepare cash flow charts. Analyze changes to contract documents, i.e. Owner Change Order Requests (CORs), Subcontractor Change Orders (SCOs). Review revised cost reports with Project Manager and assist in establishing final costs. Attend and participate in monthly job reviews. Work with Project Manager to perform a thorough and objective bid analysis using all applicable components. Prepare subcontractor Schedule of Values and monthly owner billings with Project Manager and Project Superintendent. Other duties upon request. Qualifications: 3 years of experience as a Project Engineer in commercial construction industry. Bachelor's degree in Construction Management of Engineering or related field. Proficient computer skills in Microsoft Office Suite, Project Management software (Viewpoint or similar) and Scheduling software (Primavera or similar). Apply a complete and proficient understanding of construction management, engineering, safety, scheduling, estimating, budgets, costing and procurement. Analyzing and interpreting data. Effective verbal and written communication skills. Multi-tasking in a fast paced environment. Strong leadership, detail oriented, problem solving, initiative and teamwork. Proven ability to fulfill project development to project closeout responsibilities Working Conditions: Duties required physical abilities such as repetitive hand/finger motions, arm extensions, sitting, standing, and walking jobsites that include uneven and changing site conditions. As well as climbing stairs and ladders, etc. The individual is required to occasionally move around the office and constantly operate a computer and other office machinery, etc. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Level 10 Construction is an Equal Opportunity Employer M/F/Disability/Veterans. All applicants applying must be authorized to work in the United States.

Project Engineer (Construction - Concrete Subcontractor) Job Type: Full-time Pay Range (Annualized): $60,000 - $90,000 per year. About the Role We are a concrete subcontractor seeking a Project Engineer to support our Project Management team based in our Rancho Cordova office. This role helps keep projects organized, documented, and moving-supporting communication, implementing document controls, evaluating change order requests and submittals of shop drawings, reviewing project schedules, etc. This position is ideal for someone looking to build or continue a career in construction management. What You'll Do Develop a full understanding of the scope and interdependence of all contract documents. Handle and submit Daily job reports, RFI's, and submittals. Manage effective document control mechanisms for the project to ensure that work is performed in accordance with contract documents. Evaluate change order requests including design changes, specifications and drawing releases and reports status. Evaluate submittals of shop drawings, material data and samples and take appropriate action based upon contract specifications. Review the project schedule and assist the project manager in the maintenance of it as requested. Assist the project manager in the maintenance of effective cost control mechanisms for the project. Complete project close out requirements in accordance with contract documents. Administer quality control program as outlined in the project procedures manual. Become familiar with safety requirements of the project and monitors compliance. Utilize safe work practices and follow directives, policies, and procedures for assisting and maintaining a healthy and safe work environment. Execute additional duties and responsibilities as assigned. What We're Looking For Ability to prioritize multiple tasks and adapt to changing requirements and priorities. A self-motivated and proactive team player. An organized and detail oriented individual. An skilled communicator who can interact effectively and professionally with all levels of employees, management, vendors, clients, and others. A dedicated team member who is comfortable with traveling, working on active jobsites, and who can work extended hours when required by project schedules or urgent circumstances. Qualifications 1-3 years construction experience. Ability to use a computer. Proficient with Microsoft 365 (Outlook, Word, Excel, etc.) and Bluebeam (or equivalent). Proficiency with PlanGrid or Procore are a plus. High School Diploma/GED required; Construction Management degree preferred Work Environment & Schedule The position reports on-site to an office located in Rancho Cordova, CA. The position requires travel to active construction jobsites as needed or required. Typical office hours are Monday - Friday, 8:00 - 5:00. The working schedule may vary by project needs. The company has an engaging culture and periodically attends or hosts events, on and off site. Benefits Medical, Dental, Vision, and Life Insurance. Employee Assistance Program. Profit Sharing & 401(K) Program. Discretionary Bonus Program. Paid Sick Leave (5 days per year) Paid Vacation Leave (starts at 2 weeks/year) Paid Holidays (9 days per year) Paid Volunteer Day Paid Bereavement Leave Equal Opportunity We are an Equal Opportunity Employer and consider applicants without regard to race, color, religion, sex, gender identity/expression, sexual orientation, national origin, age, disability, veteran status, or any other protected status. Reasonable accommodations are available for qualified individuals with disabilities.

Before applying for this job, please read description in its entirety and if you are qualified and interested, follow the directions below on how to apply. This position is located in Roseville, CA. No relocation package is provided for non-local candidates. Harris & Bruno International is looking for a Manufacturing Engineer to work in a high pace manufacturing environment. This individual will be expected to: Carry out process improvement, problem resolution, project management and employee training. Improve manufacturing processes and methods for cost reduction, quality improvement and efficiency. Prepare and present plans and coordinate deployment including training of team. Designs, develops, and tests and/or sources and cost-justify various tools, machinery and equipment for recommended manufacturing methods. Assist in improving production control, standard operating procedures, safety, quality control and training. Perform research, design, and development of manufacturing processes including production flow, assembly methods and production equipment. Prepare and maintain detailed layouts of building and equipment. Coordinate the manufacturing launch of new/revised products including establishing goals, training team members and evaluating results. Perform product/process analysis for cost reduction, quality improvement, and improved efficiency. Represent manufacturing on cross functional teams. Maintain product and company reputation by complying with government regulations. Benefits Package Includes: Medical Dental Voluntary Vision Company provided life insurance with the option of additional voluntary life insurance. 401k with employer match. Robust PTO policy beginning with 3 weeks earned the first year. Paid holidays. Knowledge/Skills: Technical Capacity. Proficient at problem solving and analysis. Leadership. Communication proficiency. Education/Experience: Bachelor degree in Engineering required. 3 or more years' experience as a Manufacturing Engineer. Experience with 3-D Modeling Harris & Bruno International is a stable company that has been in business since 1948. We are experiencing regular, steady growth in our core and developing product lines. We enjoy a strong presence in the rapidly expanding commercial printing market supporting customers who package products that you use every day.

*About us* Dokken Engineering is a small business in CONSTRUCTION\_ENGINEERING in Folsom, CA. We are professional, agile and our goal is to WE ARE DOKKEN est. 1986 We are civil and structural engineers, environmental planners, right of way agents. We are hydraulics specialists, community outreach experts, biologists, archaeologists, traffic and electrical engineers. We are design and delivery gurus. SENIOR ENGINEER (Water Resources) NOTE: Job duties and responsibilities are subject to change at any time and may include other tasks, as assigned. At Dokken Engineering, we're looking for the best and brightest to join our Water Resources team. Dokken Engineering delivers innovative engineering solutions for local, state, and federally funded projects throughout the state of California. Come join us to develop and implement innovative water resources strategies and solutions -- on projects in the community you live in, regionally, and throughout California. We are seeking a Senior Engineer/Water Resources for our Folsom HQ office. You will be providing a variety of professional civil engineering and hydraulics tasks. You will be performing engineering work and exercising independent judgment. Essential Functions: •Lead preparation of engineering analyses for potable water, sewer, recycled water, drainage,flood control, and agricultural irrigation systems •Lead the analysis and preparation of erosion control mitigation •Lead in the preparation of construction stormwater documents •Prepare and check quantity calculations •Oversee associate and assistant staff work on projects •Lead projects associated with water resources design and analyses Other Duties & Responsibilities: •Coordination with internal/external disciplines, utility companies, subconsultants and clients •Attend meetings, prepare meeting minutes, and address action items •Perform quality control for reports/projects •Lead marketing efforts occasionally Minimum Requirements: •Bachelor of Science in Civil Engineering or related field •California Professional Civil Engineer license •Minimum of 7 years of progressive water resources experience •CA driver's license Other Desired Knowledge, Skills & Abilities: •Strong working knowledge of hydraulic design software such as HEC-RAS, StormCAD, Innovyzesoftware, PondPack, CulvertMaster, WSPG, ArcGIS, and other similar programs •Strong understanding of basic and more complex water resources principles •Stormwater Practitioner/Designer (QSP/D) certification a plus •Effective interpersonal, verbal and written communication skills •Strong technical writing and analytical skills •Ability to work independently and as part of a team SENIOR ENGINEER (Water Resources) •Experience with roadway design and CAD software such as Microstation, In-Roads, or AutoCAD •Masters Degree in Civil Engineering or related field Physical Requirements: •Will sit, stand or walk for the entire duration of a workday •Will use telephone, computer system, email, or other electronic devices on a regular basis •Close vision, distance vision, peripheral vision, depth perception and ability to adjust focus •Work mostly indoors. Occasionally work outdoors in remote or urban environments •Usually work near others, such as in a shared office space •Occasionally wear protective gear, such as a hard hat •Sometimes work in noisy or distracting work environments •Occasionally travel to a project site by automobile and/or airplane •Occasionally work from a vehicle while at project sites FLSA Status: Full-Time Exempt Compensation: Competitive salary ranging from $120,000+ commensurate with qualifications and experience Benefits: •Comprehensive health plan including medical, dental and vision coverages •401(k) Profit Sharing Plan with generous employer match •Participation in Employee Stock Ownership Plan •Life, accidental death and long-term disability insurance Location: Schedule: Folsom HQ Office; In-Person or San Diego OffceFull-time; Monday to Friday, 8:00 a.m. to 5:00 p.m. Introductory/Probationary Period: At-Will Employment Equal Opportunity Employer Statement: It is the policy of this Company to assure that applicants are employed, and that employees are treated during employment, without regard to their race, religion, sex, color, national origin, age, or disability. Such action shall include employment, promotion, demotion, or transfer; recruitment or recruitment advertising; layoff or termination; rates of pay or other forms of compensation; and selection for training. Job Type: Full-time Pay: From $120,000.00 per year Benefits: * 401(k) * 401(k) matching * Dental insurance * Flexible spending account * Health insurance * Life insurance * Paid time off * Retirement plan * Vision insurance Experience: * Civil Engineering: 8 years (Preferred) License/Certification: * PE (Required) Work Location: In person

KGS Group is looking for an Electrical Engineer to join our Bellevue, WA or Granite Bay, CA. About Us We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We're different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right. As an employee-owned company, we're invested in our work and our people. Working with us means you'll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you'll have countless opportunities to learn and grow. Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast , we are looking for strong candidates at all levels to join our team! The Role As an Electrical Engineer, you will be responsible for providing engineering inputs integral to both small and large-scale hydro and dam projects. You will lead and mentor teams, support management of production and coordinate delivery of engineering work products often with multi-disciplinary project team members and external stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our hydropower capabilities and working with key staff in growing the business. You'll also be involved in supporting project management duties, coordinating with internal and external clients as well as assisting with guiding and mentoring other engineers within the team. In this role you will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out inspections for rehabilitation projects for dams and hydroelectric facilities. Your particular focus will be design delivery and mentorship, but you will also be involved in the proposal process. You will be working in a collaborative environment with a great team of engineers, technicians, scientists, and other industry-leading peers. Key Responsibilities Provide input to those managing and executing multiple projects (small to large) from the proposal stage through to completion Establish connections with other departments to support and enhance service delivery Work collaboratively with other disciplines and multidisciplinary project teams to execute project deliverables, as well as ensure that quality objectives, schedules, and budgets are met Mentor junior staff Design modifications to, or entirely new electrical, instrumentation, and controls systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations Conduct feasibility studies for proposed designs and assess costs and benefits for alternatives in a systematic and thorough manner. Manage and execute multiple projects from the proposal stage through to completion; Projects will include a variety of small to large projects involving water resources, flood control and hydroelectric sectors Prepare and review reports Perform calculations Conduct inspections and support project work on site as required Edit and prepare design specifications Conduct QA/QC reviews and facilitate the KGS's QA/QC process. Contribute to the development of the electrical engineering practice at KGS by assisting the electrical design leadership by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks. Perform other duties as assigned About You To fill the role, we're looking for an applicant to bring forward a good mix of qualifications and previous experiences. Some highlights should include: Minimum of a Bachelor of Science (BS) degree in electrical engineering from a recognized university; A post-graduate degree is an asset Minimum of 7-15 years of experience in electrical engineering with demonstrated project management skills (tracking budgets and meeting schedules) Must be registered as a Professional Engineer (P.E.) in Washington, Oregon, or California, as well as eligible for registration as a professional engineer in other states via comity within three months of starting. Previous consulting experience is preferred but not required. Excellent verbal and written communication skills Candidate must be self-motivated, and able to work independently with minimal supervision Must be able to effectively assume a lead role as project engineer and communicate project and technical information with clients Demonstrated experience in site investigations, condition assessments, design and construction support are preferred Experience with station service distribution (all voltages), medium voltage equipment, fixed bus power distribution systems, Programmable Logic Controller (PLC) automation (for equipment control), generators and transformers including related monitoring systems, communication systems, system grounding, hoists and gate automation and balance of plant systems for hydroelectric stations preferred, but industrial experience will be considered Experience with the following would be considered an asset: Backup power systems (including Uninterruptible Power Supply (UPS), Direct Current systems and fuel fired backup) Lighting (including emergency and exit lighting systems) Fiber and copper structured cable systems, and associated networking equipment Distributed Control System (DCS) and PLC Automation, Human Machine Interface (HMI) and Remote Terminal Unit (RTU) integration (including any programming experience) Protection systems experience, including specifying, setting and verifying (include reference to voltages) Load flow analysis, system modelling, arc-flash, grounding, and other electrical studies (include reference to software used and any training) North American Electric Reliability Corporation (NERC)/Critical Infrastructure Protection (CIP) planning Physical or cyber security planning or design Unit outage planning Other renewable energy experience Travel to project sites is usually limited but is required depending on project/client requirements. The amount of travel time desired by our employees can usually be accommodated. Must possess a valid driver's license and the ability/willingness to undergo security clearance checks Have the drive, attitude, and commitment to being an active participant in our employee-owned culture is a must The salary range for this position is $120,000 to $155,000 annually. Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate's experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization. KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package. KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process.

Principal Geotechnical Manager - Sacramento, California Sequence has been exclusively retained and is currently seeking a capable Principal Geotechnical Manager to lead the geotechnical division of a respected, privately held consulting organization in Northern California. This is among the most visible leadership opportunities of its kind in the region - a unique chance to step into executive oversight for a well-established, 25-year-old firm with no debt, significant resources, and a strategic plan to expand operations across multiple states and regions. Based in Sacramento, California, with regional operations across Northern California, the Principal Geotechnical Manager will be responsible for directing the performance, growth, and long-term vision of the geotechnical team. This includes oversight of technical excellence in foundation systems, slope stability, seismic evaluation, levee and dam safety, subsurface investigations, and related disciplines, while simultaneously leading a talented group of engineers and geologists in pursuit of continued innovation and quality service delivery. The ideal individual will be both a business leader and technical authority-equally capable of mentoring staff, guiding client engagements, and shaping the operational and financial performance of the division. This role requires a proven ability to function simultaneously as a technical leader, project director, and client-facing seller-doer. While the firm maintains dedicated marketing and business development resources, this position is highly visible to clients and represents a key leadership presence in building relationships, driving project opportunities, and ensuring overall customer satisfaction. The organization operates with the stability and capital of a large platform, yet with the nimbleness and close-knit culture of a family-owned consultancy. Leadership values collaboration, integrity, and a sense of balance-recognizing the importance of work-life integration while ensuring the delivery of critical infrastructure that protects California's communities. Most projects are located within California and Nevada, allowing stability, minimal travel, and the ability to build a long-term career and life in one place. Corporate Culture The client is a privately held, family-owned firm with over 25 years of history serving California's communities. Leadership is deeply committed to fostering an environment where collaboration, respect, and integrity are not just aspirations but everyday practice. With no debt and strong capitalization, the organization operates from a position of stability that allows it to prioritize people over bureaucracy. Decisions move quickly, ideas are valued at every level, and leaders are visible and accessible. The culture emphasizes balance-recognizing that professional success is inseparable from personal well-being. Staff are supported with flexibility, minimal travel requirements, and meaningful professional development opportunities. Many team members have spent decades with the firm, a testament to its emphasis on loyalty, mentorship, and building a true sense of belonging. This is an environment where talented professionals can build not just a career, but a legacy. Responsibilities Lead, manage, and grow the geotechnical team while driving revenue and client satisfaction. Provide leadership as both technical authority and project director, ensuring quality, efficiency, and profitability across all projects. Function as a seller-doer: maintain and strengthen client relationships, identify and pursue opportunities, and represent the firm as a trusted partner. Oversee technical programs including subsurface investigations, foundation design, seismic and slope stability evaluations, levee/dam studies, and forensic investigations. Mentor engineers and geologists, fostering a collaborative, inclusive, and high-performance team culture. Guide client engagement strategies, prepare estimates and schedules, and provide oversight throughout project execution. Serve as the senior technical and client-facing leader representing the firm with agencies, partners, and stakeholders. Qualifications California Geotechnical Engineer (GE) strongly preferred; California PE required (with GE obtained within 12 months if not currently held). 8-10+ years of progressively responsible geotechnical engineering experience, including senior management. Expertise in foundation systems, seismic analysis, dam and levee safety, slope stability, and complex infrastructure challenges. Demonstrated ability to lead teams, manage KPIs, and cultivate strong client relationships. Experience functioning as a seller-doer, combining technical excellence with client development and relationship management. Bachelor's degree in Engineering required; Master's in Geotechnical Engineering preferred. Candidate Profile This opportunity could be ideal for a seasoned senior professional seeking a long-term home within a stable, well-capitalized, and growing organization-one where their knowledge and abilities will be valued, recognized, and rewarded. At the same time, it may also be an excellent fit for a talented and dynamic mid-level leader who is poised to step into principal responsibility and lead the geotechnical group with the full backing and resources of an established firm. Compensation & Benefits The organization offers a highly competitive compensation package, including a strong base salary with performance-based bonuses, comprehensive medical/vision/dental coverage, vacation, holidays, and parental leave. An industry-leading 401(k) program with company match is provided, alongside professional development, licensing support, and tuition reimbursement. Relocation assistance can be structured for the right individual. This is an exceptional opportunity to step into leadership with a respected, well-capitalized firm that combines technical excellence with values-driven culture and long-term growth plans. For the right professional, this role represents the chance to shape not only a business unit but also the future of resilient infrastructure across California and beyond. Apply here, through our corporate website at: ************************ or submit to: Sequence Staffing 2008 Opportunity Drive, Suite 150 Roseville, CA 95678 Phone: ************ Email: ************************* “Sequence: Where a handshake still means everything.”

Kratos Defense & Security Solutions, Inc., is a leading defense technology company focused on unmanned systems, satellite communications, cyber security/warfare, microwave electronics, missile defense, training, and combat systems. Our customers include the U.S. federal government, foreign governments, commercial enterprises, and state and local government agencies. At Kratos, we prioritize affordability as a cornerstone of our technology. We leverage proven, cutting-edge methodologies and technology to minimize costs, streamline schedules, and mitigate risks, ensuring timely delivery of cost-effective solutions to market. Kratos Unmanned Aerial Systems (KUAS), a division of Kratos Defense, is renowned for its expertise in developing, delivering, integrating, and supporting high-performance, cost-effective, jet-powered Unmanned Aerial Systems (Targets and Tactical). As a mid-tier defense contractor, we've demonstrated agility and innovation in providing aircraft to the US military and global allies and partners. Our track record of delivering top-notch jet-powered subscale targets has established us as a go-to defense contractor capable of delivering capabilities at an affordable price. At KUAS, we prioritize innovation, collaboration, and growth. Our team collaborates to cultivate a supportive and dynamic workplace, fostering creativity and promoting professional development while honoring personal and family lives. Join our team and help shape the future of unmanned technology within the defense industry today! GENERAL JOB SUMMARY: Develops, implements, and improves manufacturing and industrial processes to effect maximum product throughput and optimum resource efficiency. Coordinates engineering changes to existing product lines and manages new product introductions. Sets work standards, work-flows, and defines resource requirements for assigned programs. Is expected to apply and champion 'Lean Manufacturing' methodologies in all areas of the manufacturing cycle. Works closely with other engineers and other functional departments to ensure schedule, systems, and part/process data integrity. ESSENTIAL JOB FUNCTIONS: Manufacturing Engineer ALL The duties and responsibilities listed below apply to all levels of Manufacturing Engineers. Each level of Manufacturing Engineer has additional duties and responsibilities listed. Works with customer released or KUAS released drawings and/or CAD models, engineering BOMs, and other engineering specifications to develop, implement and improve manufacturing processes. Creates or participates in engineering and manufacturing reviews and communicates effectively as a technical contributor. Implements and executes producibility concepts and understands DfX of products and processes. Collaborates well with internal and external resources to resolve technical issues. Develops and documents the manufacturing process in detail with an emphasis on visual media, ease of training, and standardized format. Responsible for disposition of discrepant or non-conforming product. Has familiarity with CAD tools, manufacturing execution systems, ERP, and other commonly used software. Designs, coordinates and validates workstation layouts with an emphasis on ergonomics, single piece or small batch flow, visual aids, Poke Yoke (mistake proofing), 5S, and zero-defect policies. Calculates and communicates shop floor staffing based on production requirements. Provides OTJ training or mentoring and may provide certification for processes to production associates. Works with materials management to develop and implement effective inventory methodologies. Reviews and designs in-process handling equipment for the safe and expeditious transportation of parts, inventory, and/or tooling. Identifies tooling requirements and coordinates the manufacturing of tools/fixture. May identify issues with production personnel and recommend mitigation actions. Responsible to generate, review, and maintain cost, schedule, and technical performance operational targets and standards. Other duties may be assigned. Manufacturing Engineer I Works on projects of basic complexity that effect program outcomes. Implements Manufacturing and/or Engineering Change Orders. Reviews and updates manufacturing work instructions. Collaborates with Quality Engineering to determine inspection criteria and methods. Manufacturing Engineer II Works on projects of medium complexity which impact aspects of programs. Works with IPT and Program managers to ensure schedule and contractual integrity. May coordinate the work of other engineers and production specialists. Reviews and approves Engineering Design changes. Coordinates tool maintenance, repair, and inspection. Implements new product design into the manufacturing system. Constantly reviews equipment, technology, processes, and manufacturing methods to identify opportunities for improvements. Manufacturing Engineer III Works on projects of advanced complexity that have significant program impact. Works with IPT and Program managers to ensure schedule and contractual integrity. Establish & maintain material, process, and workmanship specifications. Develop and implement tooling for all phases of production. A subject matter expert for manufacturability of product, process, and tooling. May mentor junior level manufacturing engineers. Manufacturing Engineer IV Independently works on projects of advanced complexity that have major organizational impact. Maintain reliable and safe manufacturing systems while improving production rates, efficiencies, yields, costs, and changeovers. Responsible for material evaluation, testing, and implementation for production operations. Includes assisting Engineering and Supply Chain with material obsolescence and or selection. Evaluate and improve on processes in manufacturing systems. Research and purchase new manufacturing technology. Advise on corrective actions. Responsible to establish & maintain material, process, and workmanship specifications. Will mentor lower-level manufacturing engineers and act as a liaison to other functional organizations. Manufacturing Engineer V Advise manufacturing engineers in a leadership style role within a manufacturing environment. Responsible to demonstrate expert level knowledge of manufacturing processes, methodologies, and best practices. Provide mentorship in lean manufacturing principles and continuous improvement methodologies (e.g., Kaizen, 5S, value stream mapping). Perform project management tasks, including planning, budgeting, resource allocation, and timeline management. Engage in professional development activities, such as attending conferences, workshops, and training sessions. Provide oversight to small teams of manufacturing engineers. Provide problem-solving and analytical skills to identify and resolve manufacturing issues. Communicate effectively, both verbal and written, to collaborate with stakeholders at various levels, including executives, engineers, technicians, and operators. Stay up-to-date with industry trends, emerging technologies, and manufacturing advancements to management. SUPERVISORY RESPONSIBILITY: None COMPENSATION: $75,000 - $150,000 Annually #LI-Onsite EDUCATION AND EXPERIENCE: Required: Each successive level of Manufacturing Engineer builds on the identified typical qualifications listed for the previous level(s) Manufacturing Engineer. Manufacturing Engineer I Requires BS degree in a technical field, (Manufacturing Engineer preferred). A minimum of 1-2 years of progressive/technical experience. May be required to obtain and maintain a U.S. security clearance at the appropriate level (requires U.S. Citizenship). Manufacturing Engineer II Requires BS degree in a technical field (Manufacturing Engineering preferred). A minimum of 2-5 years of progressive/technical experience. May be required to obtain and maintain a U.S. security clearance at the appropriate level (requires U.S. Citizenship). Manufacturing Engineer III Requires BS degree in a technical field (Manufacturing Engineering preferred). A minimum of 5-7 years progressive/technical experience. May be required to obtain and maintain a U.S. security clearance at the appropriate level (requires U.S. Citizenship). Manufacturing Engineer IV Requires BS degree in a technical field (Manufacturing Engineering preferred). A minimum of 7-10 years progressive/technical experience. Material and/or Process Engineering experience. May be required to obtain and maintain a U.S. security clearance at the appropriate level (requires U.S. Citizenship). Manufacturing Engineer V Requires BS degree in a technical field (Manufacturing Engineering preferred). A minimum of 10 years progressive/technical experience. Material and/or Process Engineering experience. Mentorship experience. May be required to obtain and maintain a U.S. security clearance at the appropriate level (requires U.S. Citizenship). Preferred: Experience with composite manufacturing, i.e. lamination, machining, and bonding. Experience in lean manufacturing methods. CATIA v5. WORK ENVIRONMENT/PHYSICAL REQUIREMENTS: Standing on a hard surface, walking. Some lifting (not over 50 lbs.). Office and manufacturing environment. May work extended hours or weekends. Employee may generate, handle, manage, or work around hazardous materials and hazardous wastes. May be required to lift up to 50 pounds in accordance with KUAS General Safety Training guidelines. TRAVEL REQUIREMENTS: 0-25% May be required between other KUAS locations.

Purpose of the role: The primary role of the Project Engineer is to provide technical support and project coordination for capital projects and the Operations Engineering teams. Establish facility and layout design solutions, cost estimates, scopes of work, create specifications, and support Project Managers managing assigned projects to successful completion. In addition, the Project Engineer will provide support to help plants meet OEE and spoilage targets as needed. Key Responsibilities: Create, edit, and update AutoCAD drawings Develop detailed technical specifications for RFQ/RFP related to equipment, facility, and conveying purchases and installations. Develop SOW and project cost estimates for Capital Approval Requests (CAR) submittal. Manage SAP documents including drawings, purchase orders (PO), Goods Receipts (GR), and Invoices. Communicate effectively with other functional areas, plant operations teams, vendors, and contractors. Support Project Managers on Capex projects as needed. May assist managing projects on site in plants and other facilities. Manage vendors and contractors. Work with project and plant teams to ensure work is done safely, on time, and within budgets to meet project and business objectives. Support other functional areas as needed. Requirements: Bachelor's Degree in Engineering from an accredited College or University Minimum 5 year's work experience in Engineering (Mechanical preferred). Minimum 5 years work experience in high-speed manufacturing (Can-making/packaging preferred). Ability to work at the Ardagh Technical Center (ATC) located in Elk Grove Village, IL AutoCAD skills (highly proficient) Ability to travel 50%+/- of the calendar year (mostly domestic but could include some international travel) Self-starter with ability to work independently and in a team environment Strong written and oral communication skills Excellent interpersonal/team skills Project Management proficiency, experience using MS Project Preferred software experience: AutoCAD, MS Office (Excel, Word, PowerPoint, Outlook), MS Project, SAP Ardagh Metal Packaging is a leading global supplier of sustainable, infinitely recyclable metal beverage cans to brand owners. A subsidiary of sustainable packaging business Ardagh Group and a leading industry metal packaging company, Ardagh Metal Packaging employs more than 6,300 people across Europe, North America and Brazil, with sales of approximately $4.7 billion. Ardagh Metal Packaging believes that the success of our business depends on the success of our people. We strive to create working environments where our employees feel valued and can work to their full potential. We offer exciting and rewarding opportunities for talented and creative people. If you have ambition and want to make an impact with your career, come and join our team - you'll enjoy the journey! Ardagh Metal Packaging - North America has been and will continue to be an equal opportunity employer. All employment decisions are made without regard to sex, gender (including pregnancy, childbirth, breast feeding, and related conditions), sexual orientation, gender identity, gender expression, race, creed, religion (including religious dress and grooming), color, national origin, ancestry (including association, affiliation, or participation with persons or activities related to national origin, English-proficiency or accent, or immigration status), physical or mental disability, medical condition, genetic information, marital or domestic partner status, age, veteran or military status or any other basis prohibited by federal, state, or local law. Discrimination against any employee or applicant based on any of these factors is prohibited. The anticipated base annual salary range for this role is between $93,900 and $140,900 per year. This role is bonus eligible. The bonus incentive program is based on company meeting or exceeding targets. Please note that the salary range provided is a good faith estimate and is only applicable for roles that are based out of Illinois. The final salary will be determined after considering relevant factors, including, but not limited to, a candidate's qualifications, experience, and work location, where appropriate. Ardagh Metal Packaging also offer a comprehensive benefits program including medical, prescription, dental and vision coverage with an opportunity to earn a medical/prescription premium reduction by completing a qualified wellness activity. The Company also offers a 401(k) Plan. Ardagh Metal Packaging benefits may be amended at any time.

**P2S** stands as a provider of professional engineering services to a broad range of markets, including higher education, healthcare, ports/harbors, industrial, entertainment, commercial, laboratories, municipal, and federal sectors. Our specialties include electrical, mechanical, plumbing, fire protection, and technology integration. Our offered services range from engineering and commissioning to construction management. With over 300 dedicated employees, P2S is an internationally recognized leader in many of the key markets we serve. We provide a blend of innovation and technical excellence in delivering green solutions that enhance and sustain the built, natural, and social environments. Currently, we have offices in Long Beach, Seattle, Irvine, San Diego, Los Angeles, and San Jose. Are you a Mechanical Design Engineer with 5-10 years of experience looking to grow your career? P2S is an award-winning engineering firm that has been named a "Best Place to Work" for the past 15 years. Employment Type: Full-time Hybrid Schedule: 3 days In-office / 2 Remote Salary Range: $120,000- $150,000 (dependent on experience) Level: Mid Office: Seattle, WA, Long Beach, CA, Sacramento, CA, Irvine, CA **Position Summary** We are seeking an experienced Mechanical Design Engineer specializing in HVAC system design to join our engineering team. The ideal candidate will have 5-10 years of experience in the design and coordination of HVAC systems for commercial, institutional, and industrial buildings. This position involves leading mechanical design efforts, managing projects from concept through construction, and collaborating closely with architects, owners, and other engineering disciplines to deliver high-quality, coordinated designs. **Key Responsibilities** + Lead and perform HVAC system design, including load calculations, equipment selection, and ductwork/hydronic system layout. + Prepare and review drawings, specifications, and technical documentation in accordance with project and code requirements. + Coordinate designs with architectural, structural, electrical, and plumbing disciplines to ensure fully integrated building systems. + Conduct field surveys, evaluate existing mechanical systems, and develop retrofit or upgrade solutions. + Support project development from concept design through construction administration, including responding to RFIs and reviewing submittals. + Collaborate with clients and project managers to define scope, schedule, and budgets for mechanical portions of projects. + Mentor junior engineers and designers, providing technical guidance and quality assurance reviews. + Stay current with applicable building codes and industry standards. + Participate in internal design reviews, QA/QC processes, and project closeout documentation. **Qualifications** + Bachelor's Degree in Mechanical Engineering. + Professional Engineer (PE) license or ability to obtain within 12 months (preferred). + 5-10 years of progressively responsible experience in HVAC design within a consulting engineering or design-build environment. + Proficiency in Revit, AutoCAD, and HVAC load calculation software (e.g., Carrier HAP, Trane TRACE). + Strong understanding of HVAC system types (VAV, DOAS, hydronic systems, chilled/hot water plants, VRF, etc.). + Familiarity with energy modeling, sustainability, and LEED/ASHRAE 90.1 compliance (preferred). + Excellent written and verbal communication skills; ability to lead technical discussions with clients and project teams. + Demonstrated ability to manage multiple projects and meet deadlines in a collaborative environment. **Additional Preferred Skills** + Experience with healthcare, laboratory, higher education, or mission-critical facilities. + Knowledge of specification writing and Division 23 standards. + Basic understanding of building automation systems and controls integration. + Field experience with commissioning or construction administration. \#LI-CC1 #LI-Hybrid **What sets P2S apart?** For 15 years in a row, P2S has been regarded as a "Best Place to Work" by our employees. Why? Because we value satisfied employees just as much as satisfied clients. With competitive benefits, flexible work schedules, paid training/professional memberships, and more. - we aim to attract the best talent and keep them here Learn more about what it means to work at P2S: *************************** _P2S is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees._ **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits** **401(k) Plan with Company Match:** Currently match contributions dollar-for-dollar up to 4% of eligible pay; immediate vesting. **Health & Welfare Benefits:** Employer provided medical, dental, vision, prescription drug, Employee Assistance Program and accident & illness coverage. **Life and Disability Insurance:** Employer provided basic life insurance and AD&D valued at 50K coverage amount with the option for voluntary buy-up for additional coverage. **Time Off:** Flexible non-accrual vacation; company holidays per policy. _(For California employees, this is separate from California paid sick leave, if applicable.)_ **Expenses:** Business travel and related expenses reimbursed per company policy. **Discount Program:** Company-sponsored discount program with savings on multiple lifestyle categories. **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Salary** **Hiring Min Rate** **120,000 USD** **Hiring Max Rate** **150,000 USD**

About the RoleIn this role, you will support the development of the color, print and pattern identity for a product area. You will assist in developing seasonal print and woven concepts using a CAD system to create repeats, colorways, and scale variations of both purchased and original artwork. You'll need to partner closely with the design team and understand the brand aesthetic to achieve iconic and flawless concepts.What You'll Do Support in the development of seasonal print/color concepts and build out relevant print/yarn dye/ embroidery pattern stories from that concept that are on brand Input prints and yarn dyes in CAD system in multiple colorways and various sizes, maximizing efficiency and organization and meeting deadlines Maintain an understanding of print and CAD technology trends in the market, providing relevant imagery to communicate print trends and build seasonal color palettes and pattern boards Assist in preparing artwork packages that comply with production ready standards, providing well defined recommendations to meet business requirements Ask effective questions and solicit feedback to understand needs Complete structured assignments based on stated priorities, such as maintaining an organized project identification system and ordering supplies. Who You Are Basic knowledge of CAD systems/software/printers (NedGraphics; Illustrator; Photoshop), MS Office and Excel Basic understanding of print and textile designs, color matching and creation of colorways Strong organizational, time management and communication skills Awareness of product development from conceptualization to finished design for textiles Recognize and act on inconsistencies in data or results

Details: We are looking for either a Project Engineer I or II depending on your experience. Please read below and apply if you feel that you have the right fit. We look forward to speaking with you. Project Engineer I: Assists with the delivery and completion of capital projects on time and within budget, working with external agencies and utilities. Project Engineer II: Manages multiple projects independently, overseeing the completion of capital projects, and may supervise support staff. Essential Duties & Responsibilities Project Engineer I: Assist with the oversight of construction activities for assigned capital projects. Coordinate internal and external resources to meet project goals. Monitor project schedules and budgets, recommending corrective actions when needed. Conduct quality control and inspection activities. Prepare periodic progress reports. Perform other duties as assigned. Project Engineer II: Oversee construction of multiple capital projects. Work independently on smaller projects as needed. Prioritize assigned projects and balance the needs of various functions. Monitor and adjust project schedules and budgets, implementing corrective actions. Provide oversight of quality control and inspections. Prepare and present progress reports. May supervise or direct support staff as needed. Minimum Qualifications Project Engineer I: Bachelor's degree in civil, mechanical, or environmental engineering, or a related field. Experience with project management software (MS Project preferred). Strong oral and written communication skills. Project Engineer II: Bachelor's degree in civil, mechanical, electrical, or environmental engineering, or a related field. Professional Engineer registration or Project Management certification preferred. At least 2 years of construction management experience in public works or utility projects. Proficiency in project management software, with knowledge of MS Project preferred. Strong communication and analytical skills. Qualities of a Successful Project Engineer I/II: Flexible, accountable, and passionate about work. Willingness to learn and grow. Strong customer service and "can-do' attitude. Highly organized and goal-driven. Approachable with strong interpersonal skills. Technical Knowledge & Competency Requirements Project Engineer I: Knowledge of project management, construction management, planning, and budgeting. Familiarity with fire department and local agency regulations. Ability to analyze project budgets and schedules and communicate effectively. Must be willing to travel as required, including occasional overnight stays and full-day trips. Project Engineer II: Working knowledge of project management, construction practices, and regulatory requirements. Strong ability to analyze project data and communicate findings effectively. Ability to make sound independent decisions and manage multiple projects simultaneously. Willingness to travel as required, including overnight stays and full-day trips. Please apply today for an immediate and confidential conversation! PTS is an Equal Opportunity Employer #IND1

and are looking for growth and opportunities? Look no further! We are a thriving commercial construction company founded in 1977. Our Mission and Vision: To be the most trusted building partner in the communities that we serve. This is our goal in EVERYTHING that we do. This is how we know we are successful as a company. To reach this, we understand that our relationships are everything. Our relationships with owners, each other, and our community. In our actions, we commit to: Be there for each other Support our communities Be transparent Make things right S+B James Construction has been setting the standard for excellence in healthcare, education, life sciences, commercial, retail, industrial, and public works construction in Southern Oregon and Northern California. S+B James is an equal opportunity Employer. All applicants must be authorized to work in the United States. H1B Visa Sponsorship is available for this position. Opportunities for Position Location: Bay Area (San Francisco, Oakland, Berkeley, etc.) Sacramento (including Central Valley) Southern California (including Moreno Valley) Responsibilities: Assist the Project Manager and Superintendent in the implementation of SBJ policies and execution of the project. Preparation, monitoring, and updating project schedules. Working with the project team to reduce project constraints' impact on the schedule. Preparation, maintenance, and implementation of various document control entities such as daily reports, material procurement logs, submittal logs, as-builds, testing and inspection logs, RFI logs, and change order logs. Distribution of new drawings, changes, approved submittals, RFI responses, and other project information to all affected parties. Preparing agendas, documents, meeting minutes, and actions for various meetings including but not limited to owner/architect/contractor meetings, subcontractor coordination meetings. Participating in project cost control Supports a culture of creativity and accountability in the business unit - solve problems in new ways while keeping organizational commitments. Actively promote SBJ's safety culture and practices. Provide insight and supervision for the development and maintenance of construction safety policies, procedures, and practices. What We're Looking For: Valid driver's license. Proficient computer skills in Microsoft Office, Procore, and scheduling software. Ability to read and interpret documents such as plans and specifications, safety rules, operating and maintenance instructions and procedure manuals. Knowledge of construction principles/practices required. Self-starter with strong organizational, file management, and time management skills. Proven ability to prioritize and manage multiple projects in a team-based environment Ability to problem solve and develop outcomes with multiple stakeholders A knowledge seeker who will ask why and research things they do not understand Someone who can work hard and play hard! Full Time / Salary Range: $80k- $95k per year depending on experience Benefits: 100% Health insurance for Employee 401(k) with company match Dental / Vision insurance Paid time off Sick Days Wellness Days Paid Holidays Discretionary Bonus Company sponsored events in the community Recruiting Bonuses Company Credit Card Phone Allowance Annual Christmas Party with Hotel Use of SBJ Kings Suite - Light the Beam!

Plans, directs, coordinates, and performs a wide variety of duties in the determination, implementation, optimization, and continuous improvement of new and existing manufacturing processes. Emphasis will be upon the design, fabrication, and implementation of automated and semi-automated processes ESSENTIAL JOB FUNCTIONS Identify and implement new automated processes into manufacturing Develop new processes or improve existing processes and layouts to improve process capability, yield, ergonomics, safety, reliability, and quality Analyze existing processes and implement modifications to reduce costs through improved manufacturability and process ability, efficiency, simplification, and standardization Troubleshoot product, facility, equipment, process, and quality problems and design and implement appropriate solutions Develop and write operation and maintenance instructions and manuals Maintain reliable and consistent attendance, including being punctual and dependable, in order to meet the needs of the department and the organization. Execute each essential duty satisfactorily in order to perform the job successfully. Follows all safety procedures required in the work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receiving and giving feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follow all department quality standards/criteria. Raise concerns and issues to the immediate manager. Able to understand and demonstrate the Cambro company culture, display the company's core values (Safety, Quality, Respect, and Service). Understands the department's key performance indicators and contributes to achieving these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. Hot Stamp design, process, and Hot stamp fixture design QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Bachelor of Science degree in Mechanical, Manufacturing, Automation, or Industrial Engineering or verifiable experience and vocational training in automation applications Minimum 7+ years of manufacturing engineering experience. Ability to apply concepts of advanced math and geometry, including statistics. Must be able to analyze and make decisions based on collected data. 2D or 3D drawing capability for automated equipment design on AutoCAD or SolidWorks is Basic knowledge and understanding of most industrial codes required (ANSI, ADA, OSHA, NEC, NFPA, IBC, ISO, DIN) Ability to design and write electrical schematics Ability to design, fabricate, and wire electrical control panels Familiarity with Microsoft Word, Excel, Project, and PowerPoint. Ability to create and edit text documents, spreadsheets, presentations, and schedules Digital photography and file manipulation of digital images experience Working knowledge of pneumatic control circuits and electro-pneumatic troubleshooting, electrical control panel assembly and wiring, electrical control circuit design and troubleshooting, Ability to manage multiple conflicting and sometimes changing priorities. Has the ability to adapt quickly to new projects and assignments while being dedicated and an innovative problem solver. Is also a creative thinker who is results-oriented, focused, and attentive to detail and accuracy. PREFERRED QUALIFICATIONS Knowledge of safe operation of conventional mills and lathes for the fabrication of machine components and fixtures. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes, or chemicals Working at heights Use of special visual or auditory protective equipment PPE Requirements Safety glasses Steel-toe slip-resistant shoes Hearing protection (e.g. earplugs, earmuffs) . COMPENSATION RANGE: $85,000 - $110,000 Salary may vary based on experience. CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

Chemical Engineer About the Job Thatcher Company is seeking a Process Engineer to join our engineering team in Sacramento, California. In this role, you will provide process engineering and technical support to plant operations, capital projects, and other teams. You will work closely with operations and the business team to identify process improvement opportunities, implement plant improvement projects, and drive innovative solutions. What You Will Do * Promote understanding and application of safety practices. * Optimize plant production and efficiency by the implementation of improvement opportunities and management of process constraints. * Work with operations and manufacturing experts to resolve technical issues. * Develop and maintain process documentation and safety information such as P&IDs, material balances, equipment datasheets, process line sizing calculations, hydraulic calculations and datasheets for instruments and relief devices. * Contribute to process safety and environmental performance through participation in process hazards analysis (PHA), management of changes (MOC), and incident investigation. * Manage small capital projects from design through startup.

Job DescriptionSalary: $75k - $85k Project Engineer MINIMUM EXPERIENCE: Mid-Level TRAVEL: Yes JOB TYPE: Full Time SALARY TYPE / HOURLY RATE: Salary Description The Project Engineer is a key component in the Project Management team workflow in terms of document control, record keeping, and clear communication with clients, subcontractors, vendors, and all Haggerty Construction Inc. (HCI) team members from project inception to completion. The minimum requirements for this position include, but are not limited to, the following: RESPONSIBILITIES Preconstruction Attend onsite and offsite design meetings with clients, consulting firms and/or engineers, and record meeting minutes Assist in the preparation of all necessary bid requests for design professionals as may be necessary Collaborate with Preconstruction Assistant and drafters to communicate design information and/or specific client requests as needed In early budgeting phase and final/hard bid scenarios, coordinate subcontractor bids, including preparing bid invitations, reviewing incoming bids for scope and pricing, scheduling site visits with subcontractors to review the scope of projects, acquiring best pricing from subcontractors and suppliers, and developing bid presentations Manage RFP process inclusive of pre-bid RFI tracking and document control Create and prepare takeoffs, estimates, and proposals for Project Manager review effectively with the right amount of detail and explanation of individual components of the budget and identify deficiencies in scope coverage Ensure a preliminary construction schedule has been developed for each estimate in collaboration with Project Manager Ensure project plans are submitted and retrieved from project specific authorities having jurisdiction (AHJ) Ensure prompt distribution of plan check comments with response deadlines with direction from Project Manager Review AHJ websites to download additional documents and/or required forms during plan check Construction Collaborate with Project Administrator for the creation of subcontracts, work orders, and purchase orders Write subcontracts and purchase orders under direction from Project Manager Assist project manager with scheduling Project kickoff meetings Attend onsite and offsite construction meetings with clients, consulting firms and/or engineers, and record meeting minutes Prompt and accurate distribution of project schedules, drawings and addenda, and other project specifications to subcontractors and vendors as required. Ensure subcontractor submittals match the project plans, specification book, and/or plan set Maintaining and updating the overarching project schedule and distributing to subcontractors Work with Superintendent to address daily construction issues and prepare/distribute RFIs as needed Price and prepare all job specific change orders as directed by the Project Manager Collaborate with Project Administrator during monthly billing procedures Maintain consistent communication rhythms with job specific subcontractors, Superintendents/Foreman, and vendors to ensure timely and profitable project completion Safety: Collaborates with Superintendent to complete a job hazard analysis for each project. Assists in achieving a zero-injury safety culture through the support of HCIs Safety Program Actively participates in safety meeting and training sessions Proactively identifies and communicates safety improvements and hazardous conditions to maintain a safe, healthy work environment and meet HCI safety standards Reviews all jobsite safety meeting notes Document Control Preparation, collection, tracking, recirculation, logging, and organization of all project-specific Schedules, Request for Information (RFIs), Submittals, and Construction Documents (CDs) Organization and logging of all Plan Sets ensuring the most current set is being referenced in Procore Maintaining organized job project folders on HCIs main server/repository and ensuring all project documents are available in Procore Accurate preparation of subcontractor contracts and purchase orders in compliance with the bid documents, budget, and estimate in HCIs current construction management software program Review Daily Reports and ensuring pertinent information is captured and addressed and then routed to the project specific Project Manager for approval Preparation and logging of all RFIs and Change Orders Organizes and labels as-builts, field, and office files for archiving upon completion of project Assists with data entry, print and distribution of master look ahead schedules Preparation of subcontractor bid packages as needed Ensuring bids received provide complete scope coverage by qualified subcontractors and material vendors Ensure the budget/proposal package is complete and accurate prior to delivery to client Reports To The Project Engineer reports directly to the Senior Project Manager Job Specific Required Skillset Excellent strategic thinking and decision-making skills Ability to foresee items and know and understand what lies ahead Ability to get the job done Strong facilitation and presentation skills Proven organizational skills and impeccable attention to detail. Must be able to manage multiple tasks and have excellent follow up skills both internally and externally. Critical thinking to prioritize and manage workload scope. Strong work ethic, deadline driven and a Can Do Attitude. Continued knowledge and up to date insight on changes & trends in methods of construction and materials, construction costs, wage rates, fringes, and working rules Ability to understand and grow experience with ALL types of construction and knowledge of industry practices, process, and standards Must engage in ongoing professional development, leadership, and position specific training and education Working knowledge of Microsoft Office programs including, but not limited to, Outlook, Word, Excel, and Project Working knowledge of Procore or Autodesk Construction software Ability to create and work with Adobe PDFs Ability to read and understand blueprints and perform take-offs General Requirements for All Positions: Ability to work independently as well as part of a larger team Excellent written and verbal communication skills and ability to understand the same Excellent listening and understanding skills Must be proactive, well organized, and have a strong ability to prioritize Extreme attention to detail Must be able to manage multiple tasks and have excellent follow up skills, both internally and externally Must be self-motivated, punctual, and professional in both presentation, appearance, and speech Provide solution-based responses to issues Able to lift a minimum of 25 pounds Fluent in the English language Reliable personal transportation and a motor vehicle driving record that is consistent with HCIs and insurance carriers standards and policies Educational and Experience Considerations: Requires a minimum of 5 years of experience in the construction industry with a strong background in the preconstruction process, planning, design phase management, and managing multiple projects simultaneously Degree or Certification in Construction Management (preferred)

ZEMINI's client, Northampton H20, is seeking a Heating & Plumbing Engineer!About Northampton H20 At Northampton H2O Ltd., our aim is to provide all customers with nothing but the best service at the right price. We value our customer's opinion and will always listen to their needs and requirements. Northampton H20 serves customers in the Northamptonshire areas. About the Heating & Plumbing Engineer position Join Northampton H2O Ltd, a vibrant, growing local business! Northampton H20 seeks energetic, skilled, dedicated engineers to provide installation, repair and maintenance services for residential buildings. This includes a wide range of plumbing tasks such as boiler serving, boiler repair, boiler install, some plumbing tasks and working as part of our teams on the larger sites. You should have a thorough knowledge of plumbing and heating systems and be able to work on your own and part of a team and efficiently with great attention to detail. We also expect you to be patient, customer service savvy, look for solutions and possess a practical mind. Engineer responsibilities are: Test pipe systems and fixtures for leaks Boiler breakdown servicing and repairs Boiler installations Hot and cold water systems Unvented systems General plumbing Engineer requirements are: Experience and skills Gas safe qualified Previous experience with gas systems and/or multi-discipline maintenance Plumbing and heating certifications Minimum of two (2) years experience as an engineer, with four (4+) or more years preferred. specifically: Be able to read plans and drawings A good understanding of power and hand tools Due to a requirement to local travel within this role, candidates must hold a full and current driving licence and have the ability to drive a company van. We are also looking for: Capability to work well under pressure with minimum supervision A flexible approach to work, with excellent communication Ability to work effectively as part of a team and on an individual basis Loyal and trustworthy individuals Customer service oriented, showing care and concern for customers and their homes What H20 offers: Competitive salary up to £40,000 (depending on skills and experience) Employer contributed pension Company van, fuel card, trade cards for business use; uniform and PPE will also be provided 28 days annual leave (Inc. statutory bank holidays) Environment where you are valued NOTE: We are considering applicants already located in or near our current service areas only; applicants must possess current authorization to work in the UK, as we do not offer sponsorship at this time.

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. The Manufacturing Engineer II position is located in Dixon, IL. This position participates in and contributes to process and product modifications, standards, and improvements. The Engineer II position utilizes knowledge of manufacturing equipment and processes to develop expertise in increasing product quality, output, and cost effectiveness. You will utilize lean tools and thinking in improving value streams, conduct workflow analysis, and lead process improvement and change within the organization. Qualified candidates must be able to work an on-site schedule at our Dixon, IL facility. Role Responsibilities: * Supports the appraisal of new product ideas to determine their potential to address customer needs and to achieve goals in revenue growth and market share. * Designs, analyzes, tests, and integrates components to produce final designs; and evaluates the design's overall effectiveness, cost, reliability, and safety. * Develops, executes, and evaluates fitness for use testing, product specifications, and process validation plans. * Works in cross-functional teams and is responsible for all phases of assigned standard engineering projects, ensuring the successful conclusion of all phases within an appropriate time and at an appropriate cost. * Prepares or secures and reviews cost estimates, completes required cost and equipment information, and writes appropriation requests. * Provides input on technical program objectives and product specifications to meet manufacturing needs. Keeps informed of new or improved designs, methods, and techniques, materials, and other advances in engineering technology. * Provides technical support and collaboration to manufacturing, production, and clients through customer visits and/or consultations; ensures product design meets manufacturing and/or procurement requirements. * Participates in short-range planning and technical forecasting. Prepare and present technical results and information in a clear and concise manner through drawings, specifications, reports, and oral presentations to meet Company and customer needs. * Ensures compliance with government and organization engineering standards Minimum Qualifications: * Bachelor of Science Degree in Engineering, from an accredited College or University * 3+ years of hands-on experience of industrial manufacturing or engineering Preferred Qualifications: * FAA Certification experience * Experience with Oracle or other ERP systems Annual Salary Range: $71,900 - $91,700. Actual salaries will vary based on several factors including, but not limited to applicable work experience, training, education, performance. Employee benefits are part of the competitive total rewards package that Donaldson Company, Inc. provides to you. Our comprehensive benefits program includes health benefits, retirement plan (401k), paid time away, paid leaves (including paid parental leave) and more. Relocation: This position is not eligible for relocation assistance. Immigration Sponsorship Not Available: * Applicants for this position must be currently and legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, J-1, F-1, CPT, OPT, etc.). * Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. * International relocation or remote work arrangements outside of the U.S. will not be considered. Key Words: Lean, Manufacturing, Engineering Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.