Design engineer jobs in Durham, NC

Pay: $80,000.00 - $135,000.00 per year Note: This position requires employees to be on-site five days a week at either the Raleigh, NC or Charlotte, NC office. Note: The qualified candidate for this position must have at least 5 years of transportation hydraulic design experience, preferably with NCDOT projects. About Our Client Our client is a privately held, employee-owned, and woman-owned engineering firm with over three decades of success. Headquartered in Raleigh, NC, they are recognized among the top firms in the Southeast and are a certified DBE and HUB business. With offices in Raleigh and Charlotte, they provide engineering services in transportation, roadway design, hydraulics, and more, delivering innovative solutions with a hands-on approach. Job Description Lead and support hydrology and hydraulic analysis for roadway and transportation projects Design stormwater management systems, ponds, and conveyance systems Perform erosion control and outfall analysis to ensure compliance with environmental standards Contribute to all aspects of roadway drainage design including culverts, bridges, ditches, BMPs, and watershed studies Conduct site visits and fieldwork to confirm existing conditions Develop hydrologic and hydraulic improvements for roadway and drainage projects Collaborate with multidisciplinary teams, sub-consultants, and permitting agencies Extract and analyze data from MicroStation, GEOPAK Drainage, HEC-RAS, and related tools Provide technical guidance and mentorship to junior staff Manage project scopes, schedules, and budgets when assigned Qualifications Bachelors or Masters degree in Civil Engineering or related discipline Professional Engineer (PE) license preferred Minimum of 5 years of hydraulic design experience, ideally with NCDOT projects Proficiency with MicroStation, GEOPAK Drainage, and HEC-RAS Working knowledge of NCDOT Guidelines for Drainage Studies and Hydraulic Design and FHWA Hydraulic Design Manual Soil erosion and sediment control design experience Familiarity with OpenRoads Designer and SUDA is a plus Strong written and verbal communication skills with the ability to work collaboratively in a team environment Must be authorized to work in the U.S. (sponsorship not available) Why This Is a Great Opportunity Join a top-ranked engineering firm with over 30 years of growth and recognition Relocation assistance available for qualified candidates Opportunity to work on diverse transportation and drainage projects with state-wide impact Professional growth potential, including project management opportunities and leadership development Comprehensive benefits package including health, vision, dental, life insurance, PTO, retirement plan, and paid holidays. JPC-384 Job Type: Full-time Benefits: Dental insurance Health insurance Life insurance Paid time off Relocation assistance Retirement plan Vision insurance

Notes: Fully Onsite Open for candidates with experience with project engineering and coordination experience Top 3 Must Have Skill Sets: 1. Ability to work well under pressure 2. Facilities knowledge and experience 3. Great communication skills 4. Proactive 5. Willingness to learn new experiences Job Details: Position involves support of senior staff in the initiation, design, and delivery of projects, particularly for facilities related scope. Employ basic engineering skills and practices to gather user requirements and translate them into technical documentation for execution by third party firms. Assist with project definition by performing engineering studies and assessment for facilities system, perform quality and overall facilities walkdowns. Perform field evaluations of existing systems and provide engineering design recommendations. Skills: self-started, ability to communicate effectively, manage tasks to completion. Experience with facilities management and projects is a must. Basic Qualifications Master degree OR Bachelor degree and 2 years of experience OR Associate degree and 6 years of experience OR High school diploma / GED and 8 years of experience

At IPS, we are global leaders in developing innovative solutions for the consulting, architecture, engineering, project controls, procurement, construction management, and CQV of technically complex facilities, primarily in the life sciences industry. We are looking for a talented Senior CQV Engineer to join our team at our office located in _____________. In this role, you will perform cGMP compliance-based services (commissioning, qualification, validation, consulting, etc.) as developed and defined in project agreements with IPS clients. You will also follow IPS and client standards and requirements, overall good industry practices for C/Q/V services, and regulatory requirements. You may also perform standalone commissioning services for non-FDA-regulated clients. Additional Responsibilities Write C/Q/V documents following established standards and templates, including but not limited to the following: Commissioning Forms C/Q/V Protocols and Summary Reports Standard Operating Procedures Impact Assessments Specifications (URS/FRS/DDS) FATS/SATs Perform field/site activities including, but not limited to, the following: Attend and witness FATs and SATs as a representative of IPS clients. Execution of commissioning forms and witnessing of vendor start-up and testing. Execution of C/Q/V protocols. Walkdown and verification of system drawings (P&IDs, as-builts, etc.) Compile data and prepare reports for completed C/Q/V activities including ETOPs, protocol data packages, etc. Assist in deviation investigation and resolution of problems and issues encountered during field execution activities. Work with the Project Delivery department or CM for start-up and vendor testing. Witness and troubleshoot as required. Primary responsibilities include C/Q/V of equipment and systems, including CSV and automation, supporting pharmaceutical, biotech, and medical device industries. Read, understand, and utilize the IPS Best Practices and SOPs for the delivery of compliance services Perform work to meet IPS budget requirements and quality standards. Provide consistent, complete, and timely feedback and reports to IPS project leaders, project managers, or management, of project status and issues, as requested. Come join our dynamic team that creates world-class designs for our clients, and propel your career to new horizons! Qualifications & Requirements Bachelor of Science in Engineering. This is an entry-level position. 7 or more years of relevant experience. Experience in Pharmaceutical, Biotech, Medical Device Design, Construction, Commissioning, Validation, or QA. Preferred Qualifications Experience in writing and execution of PFC, FC, IQ, OQ, and PQ forms/protocols for GMP Utilities, Equipment, Systems, and Software. General exposure and experience in a GMP/Validation discipline with a knowledge and understanding of pharmaceutical Design/Build/Commission/Validation processes and how they relate to regulatory requirements and cGMP regulations within the E.U. and U.S. FDA. Context & Safety This position will have up to 100% travel to the site, or as required by the assigned project. You may be assigned to a client site for an extended period. Overnight travel or staying in the city of the client's location is possible depending on the assignment. Travel will be per the IPS Travel Policy, client-specific travel policy, or project-specific travel plan. You may visit active construction sites and will be required to take site safety training and adhere to site safety rules. This position is a safety-sensitive position. The employee is designated for field work and attends activities at client sites where they work in construction, process, packaging, manufacturing, research, or other "non-administrative" areas. All interviews are conducted either in person or virtually, with video required. About Us IPS, a Berkshire Hathaway company, is a global leader in technical consulting, architecture, engineering, procurement, construction management, commissioning, qualification, and validation services for technically complex facilities. Integration is how we think and work. It requires the ability to unite existing and emerging technologies into a process that reliably delivers products and accelerates speed to market. That end-to-end mindset allows us to be agile and anticipate challenges as we move projects toward operational readiness. IPS applies design and delivery expertise, client-side experience, and supplier-side insight to every project. We infuse our curiosity, our passion, and our commitment to partnership in delivering solutions at any scale. We meet our clients where they are and get them to where they need to go. That's only possible when we care as much as our clients do. Specialties Process Architecture, Process Design, Engineering, Construction, Commissioning, Qualification, LEAN Project Delivery, Strategic Master Planning, Energy Conservation Management, Project Controls, Program/Project Management, Operations/Logistics Strategy and Planning, EPCMV, and Staffing Services. All qualified applicants will receive consideration for employment at IPS without regard to race; creed; color; religion; national origin; sex; age; disability; sexual orientation; gender identity or expression; genetic predisposition or carrier status; veteran, marital, or citizenship status; or any other status protected by law. IPS is proud to be an affirmative action and equal opportunity employer. Connect With Us! If you do not meet the qualifications for this specific role, but would like to submit your resume for general consideration, please click here!

We are seeking a motivated and detail-oriented Project Engineer to join our dynamic team. The ideal candidate will play a pivotal role in overseeing various construction projects from inception to completion, ensuring that all aspects are executed efficiently and effectively. This position requires strong project management skills, proficiency in construction management software, and a solid understanding of engineering principles. Your responsibilities in this role: Maintain contract documents, posting and distribution of addenda, field orders, RFI's and Requests for Proposal Control shop drawings and submittals to review for contract compliance and establish a routing process to ensure that all involved in the work are kept informed Lead the project QC including all deviation reports, pre-pour inspections, completion lists, testing reports, etc. and actively update the Project Manager and Superintendent Coordinate Requests for Information to and from architectural engineer, owner and other contractors and subcontractors Assist in assembling proposals and prepare owner change order requests Maintain “As-Built” drawings; prepare final close out sets Secure operations manuals guarantee and warranties; assist in project close-out What you need to qualify: 1-3 years of relative job experience in commercial construction highly preferred BS degree in Construction Management or Engineering Thorough understanding of industry practices and standards Strong foundation in database management (ex. Excel) and related industry software (ex. Bluebeam) Highly collaborative work style with excellent communication skills Join us as we build innovative solutions in the construction industry! LRT is proud to be an Equal Opportunity Employer and member of the Drug Free Safety Program.

Are you a problem solver looking for a hands-on internship position with a market-leading company that will help develop your career and reward you intellectually and professionally? Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible™. Learn more at ************** and on LinkedIn and Twitter (X). At ADI, you will learn from the brightest minds who are here to help you grow and succeed. During your internship, you will make an impact through work on meaningful projects alongside a team of experts. Collaborating with colleagues in an environment of respect and responsibility, you will create connections that will become a part of your professional network. ADI's culture values aligned goals, work-life balance, continuous and life-long learning opportunities, and shared rewards. The internship program features various lunch-and-learn topics and social events with other interns and full-time employees. At ADI, our goal is to develop our interns so they are the first to be considered for full-time roles. Apply now for the opportunity to grow your career and help innovate ahead of what's possible. About the Role We are seeking a motivated intern to contribute to cutting-edge analog and mixed-signal design and automation initiatives. This role offers hands-on experience in circuit design, machine learning applications, and design flow optimization, working closely with experienced engineers in a collaborative environment. Responsibilities Develop and validate machine learning models for analog design automation. Analyze design data, simulation results, and layout metrics to extract insights. Collaborate with design engineers to identify challenges and propose automation strategies. Support tool development and scripting for design flow enhancements. Perform analog and mixed-signal circuit analysis, design, simulation, and verification in advanced CMOS nodes. Optimize physical design in collaboration with layout engineers. Conduct lab evaluation and debug of pipeline ADCs; assist with test equipment setup and maintenance. Document research findings and present progress to the team. Minimum Qualifications Currently enrolled in an Undergraduate, Masters, or PhD program: in Electrical Engineering, Computer Engineering, or a related field. Coursework in Analog IC Design; familiarity with ADC architectures is a plus. Understanding of transistor-level design and simulation using Cadence and SPICE-type tools. Knowledge of IC physical design and exposure to sub-micron process nodes. Familiarity with lab equipment such as signal generators and spectrum analyzers. Preferred Qualifications Strong foundation in analog circuit design and mixed-signal systems. Experience with Python and machine learning libraries (e.g., scikit-learn, PyTorch). Familiarity with EDA tools such as Cadence Virtuoso. Exposure to design automation concepts and analog layout-aware design. Experience with data analysis tools (e.g., MATLAB, pandas). Knowledge of ADC architectures, high-speed analog design, clocking, and calibration techniques. Strong communication skills and initiative in exploring interdisciplinary challenges. For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process. Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group. EEO is the Law: Notice of Applicant Rights Under the Law. Job Req Type: Internship/CooperativeRequired Travel: NoThe expected wage range for a new hire into this position is $22 to $41. Actual wage offered may vary depending on work location, experience, education, training, external market data, internal pay equity, or other bona fide factors.

Job Description RFA Engineering (*************** is an engineering service provider dedicated to delivering our clients with timely engineering support and expertise. We are seeking a growth-oriented candidate to become an integral part of our engineering team. The selected candidate will work with an experienced engineering staff using state-of-the-art engineering tools & processes. This position will operate onsite at our customer's world-class engineering and manufacturing facility. This is a full-time position with a full benefit package listed below that includes opportunities for professional growth, direct hire by our customers, and additional opportunities within our own organization. Mechanical Design Engineer Mechanical Design Engineer will be responsible for the concept and development of mechanical components and systems that may include plastic processes, castings, stampings, laser cut parts, and welding or bonding of components for lawn care equipment. Responsibilities Communication with suppliers and customers on product selection and integration Use of Creo and Windchill to support 3-D Modeling of components, sheet metal and possibly hydraulic or electrical routings. Creation and support of 2D drawings and specification documentation Work with manufacturing, product verification and validation, and suppliers to develop efficient and cost effective designs Compile and furnish necessary information (engineering decisions and reports of pertinent design analyses data) to document the design solution required for building of prototypes and adoption of the design with possible involvement of other functional engineers. Requirements Bachelor's of Science in Mechanical, Aerospace, or Agricultural Engineering or related degree Strong mechanical aptitude demonstrated through work experience or hobbies Excellent communication both written and verbal Demonstrated ability to meet deadlines and commitments Strong analytical, problem solving and troubleshooting skills Ability to thrive in a team environment Desired Attributes Experience in 3-D Modeling Software; Creo experience (Preferred) Previous experience with Windchill or PDMLink Strong understanding of GD&T Design experience or exposure to off-road mobile equipment Ability to address quality issues, determine root cause and drive to a corrective action Desire to work in an engineering environment focusing on robust & cost effective designs Visa sponsorship is NOT available for this position. Pay Range: $70,000-$120,000 - Commensurate with experience About RFA Engineering RFA Engineering has provided product development and engineering services to industry leading customers since 1943. Our primary focus is the development of off highway equipment including agricultural, construction, mining, recreational, industrial, and special machines. Our work includes concept development, product design, documentation, problem-solving, simulation, optimization, and testing of components, systems and complete machines. Our engineering staff is located at our Engineering Center in Minneapolis, branch office in Dubuque, IA, and at numerous customer sites throughout the U.S. Competitive Benefits Health and Dental Insurance TelaDoc Healthiest You Supplemental Vision Insurance Company Paid Life Insurance Company Paid Long-Term Disability Short-term Disability Retirement Savings Account (Traditional 401k & Roth 401k) Flexible Spending Plan Dependent Care HSA for Medical Expenses Bonus Plan (Exempt Employees Only) Paid Time Off (PTO) Paid Holidays Bereavement Leave Employee Assistance Programs (EAP) Education Assistance Equal Opportunity and Veteran Friendly #ZR

Job DescriptionSalary: ****Must be in commuting distance to Garner, North Carolina.**** About Us We are an established, employee-owned (ESOP) manufacturing company specializing in poultry chiller systems and related process equipment used in high-volume food processing environments. Our work is highly collaborative across engineering, fabrication, field service, and project management. We value practical problem-solving, accountability, and supporting each other in delivering reliable systems to our customers. Position Summary The Mechanical Designer will work as a key contributor on our Engineering team to develop and maintain manufacturing drawings, equipment layouts, assemblies, and installation details for our poultry chiller systems and associated equipment. This role is both office and field oriented. The candidate will spend most of their time developing 3D mechanical models and drawings, while also participating in site visits for field measurements, equipment documentation, and occasional 3D LiDAR scanning. This is a strong role for someone who enjoys hands-on, real-world engineering and the technical details required to build and install equipment that works right the first time. Key Responsibilities Create and maintain 3D models and 2D fabrication drawings using Autodesk Inventor (Similar experience, e.g. SolidWorks, is acceptable with willingness to transition). Develop complete mechanical drawing packages including assemblies, detailed part prints, weldment drawings, and bill of materials (BOMs). Work directly with shop personnel (welders, fabricators, machinists) to verify manufacturability, ease of fabrication, and clarity of documentation. Conduct field investigations at poultry processing facilities to gather dimensions, document existing equipment, and assess installation constraints. Assist with or perform 3D LiDAR scanning of existing equipment and environments (experience preferred, but training available). Support installation teams with drawing clarifications and technical detail during project execution. Participate in internal reviews to ensure accuracy, quality, and adherence to company standards. Maintain structured drawing and document control practices. Required Qualifications Bachelors degree in Mechanical Engineering or related field, OR proven equivalent technical experience in mechanical design. 37 years of mechanical design experience in a manufacturing or industrial environment. Proficiency in 3D parametric CAD software (Inventor, SolidWorks, or similar). Strong understanding of fabrication processes including welding, machining, and sheet metal manufacturing. Ability to read and apply weld symbols, tolerancing standards, and mechanical detail drawings. Ability to implement a systematic, data-driven approach to investigate and resolve significant or recurring problems within an organization's processes, products or systems. Comfortable working in food processing plants, mechanical rooms, and shop floors. Comfortable engaging and communicating with customers in similar industries. Willingness to travel 12 times per month for short domestic trips (typically 13 days). Preferred Qualifications Experience using FARO or similar 3D LiDAR scanners and processing point clouds. Familiarity with Autodesk Vault or other PDM systems. Understanding of stainless steel fabrication and sanitary equipment design. Experience with equipment layout in constrained or retrofit environments. Experience with root cause techniques and analysis. Work Environment Approximately 75% office / 25% field (which may include plant environments with elevated temperatures, humidity, and wet conditions). Requires ability to climb, crawl, or maneuver around installed equipment for dimension gathering. Standard PPE provided and required during field visits. Benefits: Health/Dental/Vision Insurance Vacation Time Sick Time Life Insurance Long Term Disability ESOP (Employee Stock Ownership Plan) Must be authorized to work in the U.S. We look forward to welcoming a new member to our team!

Description: About Baker Thermal Baker Thermal Solutions offers an unmatched breadth of industrial bakery equipment with system solutions executed worldwide. We have a full range of aftermarket services from parts and inspections to on-site rebuilds for equipment with over 100 years of history. Becoming a part of the Middleby Bakery Group in 2012 has strengthened our qualification in designing and supplying complete systems to produce many types of baked products. Working with our sister companies and allied equipment partners, Baker Thermal Solutions can supply complete turnkey projects. Job Description: The Mechanical Design Engineer is responsible for designing and developing mechanical systems and components for industrial equipment. The incumbent will be responsible for the design and development of new machines as well as upgrading and retrofitting existing equipment. This role involves creating innovative solutions, preparing detailed technical drawings, and collaborating with cross-functional teams to ensure designs meet performance, safety, and cost requirements. This position reports directly to the Engineering Manager and requires the candidate to lead design projects from beginning to end. Essential Duties/Principal Responsibilities: Perform mechanical machine design tasks including, but not limited to, sizing and selecting mechanical components, generating bills of materials (BOMs), and ensure the accuracy of maintenance and technical documentation (i.e. manuals). Design mechanical systems and products for the baking industry Create and refine mechanical designs for new machines and retrofit existing equipment. Develop 3D models and detailed drawings using CAD software. Collaborate with the design team to create design sketches, layouts, and plans. Produce specifications for products and chooses raw materials and components to be used in production. Provide technical guidance on manufacturability, machining processes, welding techniques, and assembly procedures. Construct models and prototypes to evaluate design performance and functionality. Analyze test data and compare results with similar designs. Generate Bills of Materials (BOMs) and maintain accurate technical documentation. Perform calculations, simulations (FEA/CFD), and prototype evaluations to validate design performance. Ensure designs adhere to industry standards, safety regulations, and company quality protocols. Performs additional related duties assigned to support project and departmental goals. Requirements: Minimum Qualifications: Education, Experience, Skills, License/Certification: Bachelor's degree in mechanical engineering required; master's degree preferred. Five years of related experience preferred. Knowledge of 3D CAD software (Inventor Preferred) and MS Office software. Strong understanding of mechanical principles, materials, and manufacturing processes. Excellent problem-solving and creative design skills. Ability to manage multiple projects and meet deadlines. Ability to travel as required (~25%). Willingness to collaborate with fellow coworkers to provide the best solution possible. Excellent organizational skills and attention to detail. Preferred Experience: 2-5 years in mechanical design for industrial machinery or related sectors. Familiarity with thermal systems, fluid mechanics, and automation equipment.

We are looking for a skilled AV Design Engineer with a strong technical foundation in audio-visual systems and products to join our engineering team. The ideal candidate will be responsible for designing and engineering complete AV solutions for commercial environments, including conference rooms, classrooms, auditoriums, and other professional spaces.This role requires a deep understanding of AV technologies, system integration, and signal flow, along with the ability to collaborate with sales, project management, and installation teams to deliver high-quality solutions that meet client needs and industry standards.Responsibilities: Design complete AV systems including displays, projectors, speakers, microphones, control systems, video conferencing systems, and digital signage. Select appropriate AV products and components based on project requirements, site conditions, and client expectations. Develop AV system drawings including signal flow diagrams, rack elevations, cable schedules, and layout plans using tools like AutoCAD or Revit. Collaborate with sales and pre-sales teams to support AV proposals and bids. Provide technical input during project scoping, pricing, and design review meetings. Create detailed scopes of work and system documentation packages for installation teams. Coordinate with manufacturers and vendors to specify and source AV equipment. Assist with on-site system commissioning, testing, and troubleshooting as needed. Ensure designs comply with industry best practices, standards, and applicable codes. Stay current with emerging AV technologies and recommend enhancements to design practices.

Job Title : Engineer I | Pay rate: $35/hr on W2 Duration : 3 months contract (On-Site) with possibility of extension. Candidate to make $35/hr 8-5 M-F 1-3 years Experience in role. Performs conventional, less complex engineering assignments that may involve equipment or product design, testing of materials, preparation of specifications, process studies, or research investigations. Duties include analysis of designs, cost reductions, implementing quality/reliability improvements and making recommendations for product applications along with testing and evaluating Eaton products and accessories and parts, etc. Position requires a B.S. degree in engineering with normally one to three years of related experience. - Qualifications Bachelors Degree Additional Information All your information will be kept confidential according to EEO guidelines.

BACKGROUND restor3d enables surgeons to improve the reconstruction and repair of the human body through 3D printed metal implants and polymeric surgical instruments with enhanced anatomical fit and superior integrative properties. We leverage expertise and experience in 3D printing of key biomedical materials spanning a wide range of properties, seeking to improve medical device solutions. PRINCIPAL RESPONSIBLITIES Principal responsibilities for the position include the following. Other duties may be assigned as necessary. Design Custom Orthopedic Implants Analyze CT scan data and translate into 3D models Produce surgical simulations (resections, alignments, etc.) Design implants based on surgeon input and measurements with quick turnaround times Design implant trials, cutting guides, or other instrumentation needed for implant placement Draft Project Documentation Produce surgical guides with anatomy, implant variations, cutting guides, and trials Determine inspection criteria and mechanical strength analysis Produce accurate quality documentation relevant for each case Design for Manufacturing Work closely with operations to ensure manufacturability of design work Modify designs for printability based on the type of printer to be used(FDM, SLA, DLP, SLS) Clinical Representative Attend orthopedic cases and verbally assist in surgical process and custom device related surgical steps EDUCATION Bachelor of Science in an engineering or equivalent discipline (mechanical, biomedical, etc.) PREFERED EXPERIENCE Extensive experience in 3D modeling (Solidworks, ProE, 3-matic, Fusion360, Rhino, etc.) Independent worker willing to learn and develop necessary design, manufacturing, and software skills though guided training Self-starter willing to take ownership of assigned cases Ability to work flexible hours if needed ADDITIONAL QUALIFICATIONS Understanding of human anatomy (through coursework or training) Experience with design and manufacturing of medical implants (ISO 13485 and FDA 21 CFR 820) Experience working under a quality management system for medical devices or other regulated design fields Orthopedic implant design and development experience Experience with custom order engineering Experience with 3D printing restor3d is an equal opportunity employer

MACOM designs and manufactures semiconductor products for Data Center, Telecommunication and Industrial and Defense applications. Headquartered in Lowell, Massachusetts, MACOM has design centers and sales offices throughout North America, Europe and Asia. MACOM is certified to the ISO9001 international quality standard and ISO14001 environmental management standard. MACOM has more than 75 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operational facilities throughout North America, Europe, and Asia. Click here to view our facilities. In addition, MACOM offers foundry services that represent a key core competency within our business. MACOM sells and distributes products globally via a sales channel comprised of a direct field sales force, authorized sales representatives and leading industry distributors. Our sales team is trained across all of our products to give our customers insights into our entire portfolio. Applications Design Engineer-Principal Job Description: * Provide technical support to key customers in base station/ broadcasting/ Microwave RF Power areas both OEM accounts and distribution channel. * Design and optimize high performance RF Power amplifier device/turnkey solution, help to debug and fine tuning customers' design inside lab to meet customer expectation. * Design and optimize high performance RF Power amplifier demo board/turnkey solution, help to debug and fine tuning customers' design inside lab to meet customer expectation. * Work with device design team to design or optimize evaluation circuit to initiate meaningful design-in opportunity in key customers or verify the feasibility on innovation concept. * Manage the account on technical interface. Build and maintain relationships with development crews at customer sites. * Help on product quality complaint description and quality report explanation from tech. point of view. * Technically drive marketing activities, including seminar/exhibition/conference, collect market feedback and give suggestions to Product Line on NPD. * Manage lab facilities like DPD system/Loadpull system etc. Qualifications: * Bachelor/master's degree in electronic engineering with the focus on RF. * 5+ years experiences in RF design or applications, experience in high power amplifier is preferred. * Expert in RF laboratory equipment and measurement techniques. * Expert on the design of high-power RF circuits for Power Amplifier applications. * Highly knowledgeable on modelling techniques for non-linear systems, familiar with simulation tool like ADS/Microwave office/Momentum. * Highly knowledgeable on the physics of device operation. * Good understanding of RF circuit techniques for performance enhancements such as digital pre-distortion and Doherty. * Excellent problem-solving skills. * Have a proactive, implementation-focused approach. * Excellent verbal, written and presentation skills. Due to ITAR regulations, only candidates who are U.S. Persons (U.S. citizens, U.S. nationals, lawful permanent residents, or individuals granted asylum or refugee status) will be considered for this position. This position is eligible to receive restricted stock unit (RSU) awards and cash bonuses, solely at MACOM's discretion, subject to individual and company performance. EEO: MACOM is an Equal Opportunity Employer committed to a diverse workforce. MACOM will not discriminate against any worker or job applicant on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, genetic information, veteran status, military service, marital status, or any other category protected under applicable law. Reasonable Accommodation: MACOM is committed to working with and providing reasonable accommodations to qualified individuals with physical and mental disabilities. If you have a disability and are in need of a reasonable accommodation with respect to any part of the application process please call *************** or email HR_*************. Provide your name, phone number and the position title and location in which you are interested, and nature of accommodation needed, and we will get back to you. We also work with current employees who request or need reasonable accommodation in order to perform the essential functions of their jobs. Benefits: This position offers a comprehensive benefits package including but not limited to: * Health, dental, and vision insurance. * Employer-sponsored 401(k) plan. * Paid time off. * Professional development opportunities.

Work in a fast-paced startup environment, as part of a top-notch team. Take pride in giving the world an excellent product that creates life-changing medical devices. This young company is growing and there will be opportunities to take on new responsibilities and grow into new roles. Requirements BS in engineering with at least 2 years of machine design engineering experience Experience that shows you can design and build complex machines (such as 3D printers). This may include professional experience and/or significant hobbies. To put it simply, proven ability to make things work. A broad skill set in mechanical design, engineering, and physics. Ability to spec out and build systems using motors, controllers and wiring, sensors, pumps, pneumatics, etc. AutoCAD experience Experience with tools. Specific expertise in mechanical design, CAD, and DFM is required. Ability to work as part of a team Communication skills Project management skills are a plus. Responsibilities Design, build, and improve 3D printers and other manufacturing equipment that include mechanical, optical, electrical, software, fluids, pneumatics, etc Develop and conduct well-designed experiments (on 3D printers and related manufacturing/processing equipment) to characterize and improve the performance of the process. Develop process and design documentation that will form the basis for the production of additional machines as well as quality assurance systems for existing machines. Why work here? Stock options... Share in the success by being a part owner in the company! The company values diversity, inclusion, trust, strong communication, great teamwork, and work-life balance. They are building something amazing that will unlock a wave of innovation in medical technology. 100% of Health premiums paid for employee Very little travel PTO and paid holidays 401k match up to 3.5% #ZR

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Start Your Career with Purpose Are you ready to apply your engineering education to real-world challenges? Caterpillar's Engineering Rotational Development Program (ERDP) is designed for entry-level professionals like you. Through rotational assignments, you'll continue developing your skills and knowledge-helping you achieve your career goals while contributing to Caterpillar's mission of delivering exceptional products, services, and technologies to our customers. Our Engineering Rotational Development Program is an entry-level program designed to build employees' skill sets within the discipline and continue growth, even after the successful completion of the program. This 12 to 18-month program provides practical experience across multiple engineering teams and technologies. It's more than just a job, it's a launchpad for your future at one of the world's leading manufacturers of construction and mining equipment. What the Program Offers As part of the ERDP, you'll rotate through different teams and projects that match your skills, knowledge, and abilities. You'll work on meaningful projects, connect with mentors, and get exposure to various areas of the company. Here are just a few paths you might explore: * Product Design: Design components and systems for Caterpillar products to meet customer needs. Collaborate with cross-functional teams throughout the value chain-from concept to production-to deliver effective solutions. * Simulation/Performance Analysis: CFD [Computational Fluid Dynamics] (ANSYS), FEA [Finite Element Analysis], 3D modelling, autonomy sensor and photorealistic environment root cause investigation, system/subsystem/component design optimization, structural dynamics, development and optimization of engine, aftertreatment, battery, fuel cell, powertrain, machine system performance, and/or autonomy and multiple machine coordination. * Test/Validation/Hands-on: Apply strong mechanical engineering understanding in a test/validation (hands-on) environment, troubleshooting issues, and collaborating with others for optimal results. * Controls Development: Develop/implement control system algorithms using Matlab/Simulink for various control systems including, but not limited to, engine controllers, machine implement controllers, as well as powertrain controllers. Will be responsible for understanding the feature requirement, implementing it, as well as testing it prior to a production rollout. * Electronic Components: Will be responsible for designing and testing various electronic control modules, as well as various electronic components. Will work with various internal Caterpillar clients to understand controller/component requirements, help design PCB [Printed Circuit Board] layouts, as well as perform digital/analog/power circuit analysis and testing. Other duties may include working with suppliers, testing the controllers/components in various environments, ensuring that FMEAs [Failure Mode and Effects Analysis] are conducted and documented to meet stringent Caterpillar quality requirements. * Embedded Software Development: Develop embedded software in C, C#, and/or C++ for various electronic control modules. Some examples of embedded software development applications include Datalink communications, inputs and outputs (sensors and actuators), speed calculation, injection/spark timing, memory management, CPU optimization, multi-core design and implementation, autonomy algorithms for perception, localization, planning, etc. In addition, some areas of work include developing scripts in Python/Visual Basic for automation. * Software Validation/Verification for Electronic Systems: Verify functionality of a feature or control system algorithm on a HIL [Hardware in the Loop] simulator bench or a SIL [Software in the Loop] system. Understand the requirements of the feature and/or the schematics of the controller/control system, verify functionality and debug/report anomalies to the development team, and help validate fixes. * Engineering Data Analytics: Ability to write and understand computer code, Python, analytics/data science experience, exposure to machine learning concepts/tools, engineering and statistics fundamentals. * Process Engineering: Apply mechanical, manufacturing, systems and/or industrial engineering knowledge to analyze and optimize an engineering process or processes. Will have the opportunity to leverage problem-solving and communication skills. What You Have - Skills and Experiences In this role, you will have the opportunity to contribute your unique skills and experiences. Below are some of the most critical skills: * Analytical skills, initiating ideas, troubleshooting, root cause analysis, problem-solving, and critical thinking capabilities * Knowledge of engineering principles, theory, and engineering experience gained through projects, internships, and/or relevant work experience * Fundamental understanding of engineering for a manufacturing environment and the ability to design and implement materials, structures, machines, devices, systems, and processes that safely realize a desired objective or invention * Ability to manage multiple projects simultaneously and quickly acquire and apply new skills and knowledge * Collaborate with others of diverse cultures, interpersonal styles, and abilities * Strong written and verbal communication skills * Participate in and build on our inclusive, constructive, and productive work environment * Ensure all team members' contributions are recognized and valued * This position requires 12 months or less of professional experience in this field (excluding internships) Program Qualifications * ABET-accredited Bachelor's or Master's degree in Mechanical, Electrical, Computer, Agricultural, or Aerospace Engineering; Engineering Technology; or a related technical discipline (selected candidates must obtain their degree before they start) * Minimum cumulative GPA of 3.0/4.0 or higher (unrounded) * Willing to relocate and travel as needed Top Candidates May Also Have * Involvement with a campus design/competition team or related experience * Project or team leadership experience * Previous technical internship/co-op or relevant experience * Excellent interpersonal and communication skills * Intellectual curiosity, adaptability, and a willingness to learn by doing Additional Information * Please attach your resume and an unofficial copy of your transcript to your application * Applicants will be considered for positions throughout the United States * Most positions are based in Peoria, Illinois, with limited availability in other United States' locations * This is a Monday through Friday, in-person opportunity-perfect for building relationships, learning fast, and diving deep into your rotations * Sponsorship is NOT available for this position * Relocation is available to those who qualify * 2026 available start dates - February 2, 2026; June 1, 2026; July 13, 2026; and August 3, 2026 (seats are limited for each start date) Why Choose Caterpillar? We're a values-driven company where you'll feel your work matters-whether you're optimizing machine performance, writing embedded code, or designing the next innovation in clean energy. You'll gain access to top-tier mentorship, technical resources, and real ownership of your work from day one. Final Details Please regularly check the email associated with your application-including your junk/spam folder-as this will be our primary method of communication. To check the status of your application, please visit our career website using the candidate login, as it will reflect any updates to your status. Interested applicants should explore our direct hire positions at **************************** For more information, visit caterpillar.com. To connect with us on social media, visit caterpillar.com/social-media. Summary Pay Range: $79,800.00 - $143,520.00 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. * Medical, dental, and vision benefits* * Paid time off plan (Vacation, Holidays, Volunteer, etc.)* * 401(k) savings plans* * Health Savings Account (HSA)* * Flexible Spending Accounts (FSAs)* * Health Lifestyle Programs* * Employee Assistance Program* * Voluntary Benefits and Employee Discounts* * Career Development* * Incentive bonus* * Disability benefits * Life Insurance * Parental leave * Adoption benefits * Tuition Reimbursement * These benefits also apply to part-time employees This position requires working onsite five days a week. Relocation is available for this position. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at **************************** Posting Dates: August 22, 2025 - December 30, 2025 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Rosti is a leading manufacturer in the plastics and injection molding industry, delivering innovative, high-quality solutions for the automotive, consumer goods, and medical device sectors. With a global footprint, we combine technical expertise, advanced production capabilities, and a commitment to sustainability to support our customers from concept to reality.. Role Overview We are seeking a motivated and detail-oriented Project Engineer with strong experience in injection molding to join our team. This role is responsible for leading technical projects from concept through to mass production, ensuring on-time delivery, cost-effectiveness, and compliance with quality standards. The successful candidate will work closely with customers, suppliers, and internal teams to ensure smooth project execution. Essential Duties And Responsibilities This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary at any time. Lead and manage new product introduction (NPI) projects within the injection molding process. Coordinate cross-functional teams (design, tooling, production, quality, supply chain) to achieve project milestones Report project status on regular basis to customers as well as internal steering committee. Develop project timelines, monitor progress, and proactively address risks or delays. Provide technical input on mold design, tooling specifications, and manufacturing feasibility. Manage vendor quotation process request, review, and compare supplier offers to ensure cost competitiveness and technical compliance. Oversee tooling trials, mold validations, and process optimization Support cost estimation, budgeting, and resource planning for projects. Ensure adherence to quality standards (ISO, IATF) and customer requirements. Maintain clear communication with stakeholders on project status, risks, and deliverables. Drive continuous improvement initiatives in tooling, processes, and workflow efficiency. Liaise daily with customers to refine projects and propose mutually beneficial improvements. Coordinate tool repairs and changes, from quoting to toolmaker assignment and production alignment. Education and Experience Bachelors degree in Mechanical Engineering, Manufacturing Engineering, Plastics Technology, or related field. Minimum [35] years of experience in project engineering within the injection molding industry. Strong understanding of mold design, tooling, polymer materials and processing parameters. Experience with project management tools and methodologies. Excellent problem-solving skills and attention to detail. Ability to manage multiple projects simultaneously under tight deadlines. Strong communication and interpersonal skills for cross-functional collaboration. Knowledge of CAD software (e.g., SolidWorks, CATIA) and simulation tools. Mold Flow competency and warp analysis, prototyping and collaboration with the vendors and customers tool design engineers Familiarity with Lean Manufacturing and Six Sigma principles is an advantage. Compensation details: 100000-130000 Yearly Salary PI08c053248b35-31181-39253136

About Baker Thermal Baker Thermal Solutions offers an unmatched breadth of industrial bakery equipment with system solutions executed worldwide. We have a full range of aftermarket services from parts and inspections to on-site rebuilds for equipment with over 100 years of history. Becoming a part of the Middleby Bakery Group in 2012 has strengthened our qualification in designing and supplying complete systems to produce many types of baked products. Working with our sister companies and allied equipment partners, Baker Thermal Solutions can supply complete turnkey projects. Job Description: The Mechanical Design Engineer is responsible for designing and developing mechanical systems and components for industrial equipment. The incumbent will be responsible for the design and development of new machines as well as upgrading and retrofitting existing equipment. This role involves creating innovative solutions, preparing detailed technical drawings, and collaborating with cross-functional teams to ensure designs meet performance, safety, and cost requirements. This position reports directly to the Engineering Manager and requires the candidate to lead design projects from beginning to end. Essential Duties/Principal Responsibilities: * Perform mechanical machine design tasks including, but not limited to, sizing and selecting mechanical components, generating bills of materials (BOMs), and ensure the accuracy of maintenance and technical documentation (i.e. manuals). * Design mechanical systems and products for the baking industry * Create and refine mechanical designs for new machines and retrofit existing equipment. * Develop 3D models and detailed drawings using CAD software. * Collaborate with the design team to create design sketches, layouts, and plans. * Produce specifications for products and chooses raw materials and components to be used in production. * Provide technical guidance on manufacturability, machining processes, welding techniques, and assembly procedures. * Construct models and prototypes to evaluate design performance and functionality. * Analyze test data and compare results with similar designs. * Generate Bills of Materials (BOMs) and maintain accurate technical documentation. * Perform calculations, simulations (FEA/CFD), and prototype evaluations to validate design performance. * Ensure designs adhere to industry standards, safety regulations, and company quality protocols. * Performs additional related duties assigned to support project and departmental goals. Minimum Qualifications: Education, Experience, Skills, License/Certification: * Bachelor's degree in mechanical engineering required; master's degree preferred. * Five years of related experience preferred. * Knowledge of 3D CAD software (Inventor Preferred) and MS Office software. * Strong understanding of mechanical principles, materials, and manufacturing processes. * Excellent problem-solving and creative design skills. * Ability to manage multiple projects and meet deadlines. * Ability to travel as required (~25%). * Willingness to collaborate with fellow coworkers to provide the best solution possible. * Excellent organizational skills and attention to detail. Preferred Experience: * 2-5 years in mechanical design for industrial machinery or related sectors. * Familiarity with thermal systems, fluid mechanics, and automation equipment.

Akkodis is seeking a Mechanical Design Engineer for a contract position with our client located in Durham, NC. Looking to kickstart your engineering career? We have an exciting contract opportunity for an entry-level Mechanical Design Engineer to join a dynamic team working on innovative solutions in the veterinary medicine device space. Salary Range: $30.00/hour to $36.00/hour. The salary may be negotiable based on experience, education, geographic location, and other factors. Manufacturing Engineer job responsibilities include: · Develop and revise complex 3D models, assemblies, and drawings. · Manage engineering changes and Bills of Materials in PLM systems. · Collaborate with cross-functional teams and adhere to industry standards (ASME, ANSI, IEC, IPC). Desired Qualifications: · AAS/AS/BS in Mechanical Engineering, Industrial Technology, or related field (or equivalent experience). · 0-4 years of engineering experience, ideally in automated machinery design. · Proficiency in SolidWorks or similar CAD tools. · Familiarity with fabrication techniques, GD&T, and PLM systems. If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at ************************** Equal Opportunity Employer/Veterans/Disabled Benefits offerings include but are not limited to : Medical Dental Vision To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ****************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Job Title: Facilities Engineer Duration: 12+ Months Notes: Fully Onsite Open for candidates with experience with project engineering and coordination experience Job Details: Position involves support of senior staff in the initiation, design, and delivery of projects, particularly for facilities related scope. Employ basic engineering skills and practices to gather user requirements and translate them into technical documentation for execution by third party firms. Assist with project definition by performing engineering studies and assessment for facilities system, perform quality and overall facilities walkdowns. Perform field evaluations of existing systems and provide engineering design recommendations. Skills: self-started, ability to communicate effective Top 3 Must Have Skill Sets: 1. Ability to work well under pressure 2. Facilities knowledge and experience 3. Great communication skills 4. Proactive 5. Willingness to learn new experiences

****Must be in commuting distance to Garner, North Carolina.**** About Us We are an established, employee-owned (ESOP) manufacturing company specializing in poultry chiller systems and related process equipment used in high-volume food processing environments. Our work is highly collaborative across engineering, fabrication, field service, and project management. We value practical problem-solving, accountability, and supporting each other in delivering reliable systems to our customers. Position Summary The Mechanical Designer will work as a key contributor on our Engineering team to develop and maintain manufacturing drawings, equipment layouts, assemblies, and installation details for our poultry chiller systems and associated equipment. This role is both office and field oriented. The candidate will spend most of their time developing 3D mechanical models and drawings, while also participating in site visits for field measurements, equipment documentation, and occasional 3D LiDAR scanning. This is a strong role for someone who enjoys hands-on, real-world engineering and the technical details required to build and install equipment that works right the first time. Key Responsibilities Create and maintain 3D models and 2D fabrication drawings using Autodesk Inventor (Similar experience, e.g. SolidWorks, is acceptable with willingness to transition). Develop complete mechanical drawing packages including assemblies, detailed part prints, weldment drawings, and bill of materials (BOMs). Work directly with shop personnel (welders, fabricators, machinists) to verify manufacturability, ease of fabrication, and clarity of documentation. Conduct field investigations at poultry processing facilities to gather dimensions, document existing equipment, and assess installation constraints. Assist with or perform 3D LiDAR scanning of existing equipment and environments (experience preferred, but training available). Support installation teams with drawing clarifications and technical detail during project execution. Participate in internal reviews to ensure accuracy, quality, and adherence to company standards. Maintain structured drawing and document control practices. Required Qualifications Bachelor's degree in Mechanical Engineering or related field, OR proven equivalent technical experience in mechanical design. 3-7 years of mechanical design experience in a manufacturing or industrial environment. Proficiency in 3D parametric CAD software (Inventor, SolidWorks, or similar). Strong understanding of fabrication processes including welding, machining, and sheet metal manufacturing. Ability to read and apply weld symbols, tolerancing standards, and mechanical detail drawings. Ability to implement a systematic, data-driven approach to investigate and resolve significant or recurring problems within an organization's processes, products or systems. Comfortable working in food processing plants, mechanical rooms, and shop floors. Comfortable engaging and communicating with customers in similar industries. Willingness to travel 1-2 times per month for short domestic trips (typically 1-3 days). Preferred Qualifications Experience using FARO or similar 3D LiDAR scanners and processing point clouds. Familiarity with Autodesk Vault or other PDM systems. Understanding of stainless steel fabrication and sanitary equipment design. Experience with equipment layout in constrained or retrofit environments. Experience with root cause techniques and analysis. Work Environment Approximately 75% office / 25% field (which may include plant environments with elevated temperatures, humidity, and wet conditions). Requires ability to climb, crawl, or maneuver around installed equipment for dimension gathering. Standard PPE provided and required during field visits. Benefits: Health/Dental/Vision Insurance Vacation Time Sick Time Life Insurance Long Term Disability ESOP (Employee Stock Ownership Plan) Must be authorized to work in the U.S. We look forward to welcoming a new member to our team!