Design engineer jobs in High Point, NC - 217 jobs

The Imaging Service Engineer I will be responsible for providing preventative maintenance, troubleshooting, and repair of advanced imaging systems in a hospital environment, while ensuring a high level of customer service and equipment reliability. What You'll Do: Install, maintain, calibrate, and repair complex diagnostic imaging equipment including but not limited to CT, C-arm, portable X-ray, and ultrasound systems. Utilize technical and customer service skills to assess and resolve imaging equipment issues efficiently. Collaborate with clinical staff and other healthcare professionals to identify and resolve equipment-related issues. Document service activities and maintain accurate records within the department's tracking systems. Participate in on-call rotation schedule and provide emergency support as needed. What You Bring: Knowledge of diagnostic imaging systems. Demonstrated expertise in troubleshooting and resolving technical issues with imaging equipment. Proficiency with common test equipment, tools, and diagnostic software. Excellent communication, interpersonal, and time-management skills. Experience working in a hospital or healthcare environment. Associate degree in Electronics, Biomedical Engineering, or related technical field preferred; military or OEM training a plus. Position Summary: Inspect, repair, maintain, and calibrate basic diagnostic imaging equipment, devices, system, and instruments. Interact on a routine basis with other clinical health providers in the identification of technology-based problems. Key Duties: Inspect, maintain, repair and calibrate equipment and systems Provides advanced support of equipment for direct patient care Interacts on a routine basis with clinical health providers in the identification of technology-based problems and solutions Solves organization-level customer service issues and complaints Preparing required documentation and reports Ensures regulatory compliance Demonstrates a safety mindset Financial responsibility for purchasing parts and service Minimum Qualifications & Requirements: Minimum Education Requirement - Associates Degree (or equivalent experience) in electronics, biomedical engineering, or other technical discipline contributing to proficiency of maintenance and repair of imaging equipment within a healthcare environment Minimum Functional Experience - 3 years of experience within a healthcare setting with direct responsibility for the maintenance and repair of clinical devices and/or 1 year of imaging equipment repair and maintenance within a healthcare environment and/or entry level of formalized training and/or equivalent military training. MUST HAVE: Associates Degree (or equivalent experience) in electronics, biomedical engineering, or other technical discipline contributing to proficiency of maintenance and repair of imaging equipment within a healthcare environment 3 years of experience within a healthcare setting with direct responsibility for the maintenance and repair of clinical devices and/or 1 year of imaging equipment repair and maintenance within a healthcare environment and/or entry level of formalized training and/or equivalent military training. Demonstrated expertise in troubleshooting and resolving technical issues with imaging equipment. Proficiency with common test equipment, tools, and diagnostic software. Experience working in a hospital or healthcare environment.

The purpose of this position is to detail and design mechanical and piping systems in a 3-D environment using various software programs. Must have knowledge of various trades in the construction environment and how they interrelate. Knowledge of BIM (Building Information Modeling) practices is key in this position. Typical Duties * Assist in developing CAD standards and software applications to be used. * Communicate with the Project Manager to determine the needs of the project. * Work with field supervision to ensure efficient operations. * Provide accurate drawings in a timely manner. * Assist, when necessary, with field measuring & field checking of drawings. * Review technological advancements and make recommendations for adoption. * Maintain & follow company standards to ensure continuity from one job to the next. * Document all drawings and standards. * Continually improve procedures and practices. Qualifications * Minimum of 5 years of detailing and design of mechanical and piping systems in a 3-D environment * Proficiency in Revit software is required * Working knowledge of the installation requirements of both mechanical and piping systems * Solid understanding of how HVAC systems work * Basic understanding of other systems installed in commercial buildings * Ability to operate Fabrication CADmep releases 2023 through 2025 What we offer * Supportive work environment * Opportunity to learn additional skills * Eight paid holidays * Company paid life insurance, short and long term disability * 401(k) match of 100% up to 4% Pay Range $30.00 to $40.00/hour based on experience and performance AC Corporation is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Must be authorized to work in the U.S. without the company's immigration sponsorship now or in the future. The company will not offer immigration sponsorship for this position. The company will not seek an export authorization for this role. Security Clearance: None/Not Required Collins Aerospace, a Raytheon Technologies company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Our Interiors team is focused on innovation, safety and cost efficiency. But we don't just get people from point A to point B. We're committed to making air travel more comfortable, connected and secure. As a leader in aviation interior products and services we're helping airlines and original equipment manufacturers create a positive experience for their customers. We are hiring for a Mechanical Design Engineer that will be focused within Electrical Integration within our main cabin seating team. This person in this role will work to achieve day-to-day objectives with moderate impact on their work area. The candidate will be responsible for designing major components or major portions of functional systems, technically advanced prototypes, and promotional or specific products using computer design and engineering systems. Developing or improving products and facilitates manufacturing operations. Developing data and makes layouts, sketches, and notes for design proposals. Investigate pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost. Designs, develops and tests metallic or non-metallic structures or materials and their related fabrication processes for use in engineering designs. Primary Responsibilities: Integrate electrical components and wiring into design while meeting vendor and OEM requirements. Liaises between electrical integration team, electrical certification, design engineering, vendors and project teams. Prepares work statements for electrical integration team. Directs the work of outsource resources assigned on projects in electrical integration areas. Verify system configuration and block diagrams. Prepare, modify and release drawings created in CAD (NX) to verify fit, form and function of mechanical and electrical designs. Design brackets and fixations for electrical components and wiring. Verify structural acceptability of designs by testing prototypes for reliability and FAA certification through static and dynamic crash testing. Evaluate materials and parts for use in new designs including communicating with current and new suppliers. Operate in a team environment with other functional areas providing input to design solutions and participate in design reviews. Qualifications/Experience Needed: Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) unless prohibited by local laws/regulations and minimum 2 years of prior relevant experience or an Advanced Degree in a related field or in absence of a degree, 6 years of relevant experience Must be authorized to work in the U.S. without sponsorship now or in the future. RTX will not offer sponsorship for this position Preferred Qualifications: Prior experience in the design of mechanical systems for commercial aircraft seating products Experience in design using Siemens NX or other 3D CAD software Experience working with Teamcenter or other Product Data Management (PDM) tools Experience integrating electrical components (routing, harnesses, and mechanical installations) Experience working with Design for Manufacturing and Assembly (DFMA) principles Familiarity with FAA requirements Collins Aerospace, a Raytheon Technologies company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. At Collins Aerospace, our Interiors team is focused on innovation, safety and cost efficiency. But we don't just get people from point A to point B. We're committed to making air travel more comfortable, connected and secure. As a leader in aviation interior products and services, we're helping airlines and original equipment manufacturers create a positive experience for their customers. With offices and manufacturing facilities in more than 12 states across the U.S. and more than 10 countries around the globe, we're changing the game of aircraft interiors. Are you ready to join our team? WE ARE REDEFINING AEROSPACE. * Please consider the following role type definitions as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. Some of our competitive benefits package includes: Medical, dental, and vision insurance Three weeks of vacation for newly hired employees Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option Tuition reimbursement program Student Loan Repayment Program Life insurance and disability coverage Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection Birth, adoption, parental leave benefits Ovia Health, fertility, and family planning Adoption Assistance Autism Benefit Employee Assistance Plan, including up to 10 free counseling sessions Healthy You Incentives, wellness rewards program Doctor on Demand, virtual doctor visits Bright Horizons, child and elder care services Teladoc Medical Experts, second opinion program And more! Nothing matters more to Collins Aerospace than our strong ethical and safety commitments. As such, all U.S. positions require a background check, which may include a drug screen. Note: Background check and drug screen required (every external new hire in the U.S.) Drug Screen only performed on re-hires who have been gone for more than 1 year At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

**Country:** United States of America , Winston-Salem, NC, 27105 USA ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** Must be authorized to work in the U.S. without the company's immigration sponsorship now or in the future. The company will not offer immigration sponsorship for this position. The company will not seek an export authorization for this role. **Security Clearance:** None/Not Required Collins Aerospace, a Raytheon Technologies company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Our Interiors team is focused on innovation, safety and cost efficiency. But we don't just get people from point A to point B. We're committed to making air travel more comfortable, connected and secure. As a leader in aviation interior products and services we're helping airlines and original equipment manufacturers create a positive experience for their customers. We are hiring for a Mechanical Design Engineer that will be focused within **Electrical Integration** within our main cabin seating team. This person in this role will work to achieve day-to-day objectives with moderate impact on their work area. The candidate will be responsible for designing major components or major portions of functional systems, technically advanced prototypes, and promotional or specific products using computer design and engineering systems. Developing or improving products and facilitates manufacturing operations. Developing data and makes layouts, sketches, and notes for design proposals. Investigate pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost. Designs, develops and tests metallic or non-metallic structures or materials and their related fabrication processes for use in engineering designs. **Primary Responsibilities:** + Integrate electrical components and wiring into design while meeting vendor and OEM requirements. + Liaises between electrical integration team, electrical certification, design engineering, vendors and project teams. + Prepares work statements for electrical integration team. + Directs the work of outsource resources assigned on projects in electrical integration areas. + Verify system configuration and block diagrams. + Prepare, modify and release drawings created in CAD (NX) to verify fit, form and function of mechanical and electrical designs. + Design brackets and fixations for electrical components and wiring. Verify structural acceptability of designs by testing prototypes for reliability and FAA certification through static and dynamic crash testing. + Evaluate materials and parts for use in new designs including communicating with current and new suppliers. + Operate in a team environment with other functional areas providing input to design solutions and participate in design reviews. **Qualifications/Experience Needed:** + Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) unless prohibited by local laws/regulations and minimum 2 years of prior relevant experience or an Advanced Degree in a related field or in absence of a degree, 6 years of relevant experience + Must be authorized to work in the U.S. without sponsorship now or in the future. RTX will not offer sponsorship for this position **Preferred Qualifications** : + Prior experience in the design of mechanical systems for commercial aircraft seating products + Experience in design using Siemens NX or other 3D CAD software + Experience working with Teamcenter or other Product Data Management (PDM) tools + Experience integrating electrical components (routing, harnesses, and mechanical installations) + Experience working with Design for Manufacturing and Assembly (DFMA) principles + Familiarity with FAA requirements Collins Aerospace, a Raytheon Technologies company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. At Collins Aerospace, our Interiors team is focused on innovation, safety and cost efficiency. But we don't just get people from point A to point B. We're committed to making air travel more comfortable, connected and secure. As a leader in aviation interior products and services, we're helping airlines and original equipment manufacturers create a positive experience for their customers. With offices and manufacturing facilities in more than 12 states across the U.S. and more than 10 countries around the globe, we're changing the game of aircraft interiors. Are you ready to join our team? **WE ARE REDEFINING AEROSPACE.** * Please consider the following role type definitions as you apply for this role. **Onsite:** Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. _Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings._ Some of our competitive benefits package includes: + Medical, dental, and vision insurance + Three weeks of vacation for newly hired employees + Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option + Tuition reimbursement program + Student Loan Repayment Program + Life insurance and disability coverage + Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection + Birth, adoption, parental leave benefits + Ovia Health, fertility, and family planning + Adoption Assistance + Autism Benefit + Employee Assistance Plan, including up to 10 free counseling sessions + Healthy You Incentives, wellness rewards program + Doctor on Demand, virtual doctor visits + Bright Horizons, child and elder care services + Teladoc Medical Experts, second opinion program + And more! Nothing matters more to Collins Aerospace than our strong ethical and safety commitments. As such, all U.S. positions require a background check, which may include a drug screen. Note: + Background check and drug screen required (every external new hire in the U.S.) + Drug Screen only performed on re-hires who have been gone for more than 1 year At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Senior Engineering Manager In this role, you will have the opportunity to support engineering activities in all types of project sizes and complexities, under the supervision of senior engineers. Each day, you will complete the tasks cost-effectively and in accordance with contract specifications, quality standards, safety requirements, and cybersecurity policies and standards. You will also showcase your expertise by collecting data and supporting production of the engineering design. The work model for the role is: Onsite This role is contributing to the Electrification Distribution Solutions Division in the US. You will be mainly accountable for: Performing survey work, standard computations, analysis, and basic design tasks. Exercising judgment on limited details of work and on application of standard methods and preparing project documentation within your scope of deliverables. Assisting customers on technical issues and interacting with official contacts, contractors, and other staff within your scope of deliverables. Supporting in communication pertaining to specific assignments or meetings. Participating in workshops related to engineering design, tools, and processes. Our team dynamics You will join a dynamic and high performing team, where you will be able to thrive. Qualifications for the role Bachelor's Degree in Mechanical Engineering or related engineering field Entry level position for 4-year engineering degree holders with 0-2 years of experience Experience with low complexity orders and mechanical designs Proficient with AutoCAD (recent version) or equivalent computer-aided design platform Experience with 3D design including use of Creo, SolidWorks, or equivalent design platforms Familiar with MS Word, MS Excel, MS Project, PowerPoint, SAP, Windchill, and other applicable software Knowledge of mechanical design principles and engineering fundamentals Strong interpersonal skills Self-motivated with a high level of creativity Complex problem-solving skills Independent thinking and decision-making abilities Attention to detail and accuracy Authorized to legally work in the US Ability to work in a global business environment with cultural diversity PREFERRED QUALIFICATIONS Experience working in a manufacturing environment, specifically with steel or copper fabrication Experience with electrical distribution equipment Computer Aided Design certification or degree Internship or co-op experience in mechanical design or manufacturing Knowledge of ANSI Air Insulated Switchgear Familiarity with NEC, ANSI, IEEE standards More about us ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their- sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ******************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer for Protected Veterans and Individuals with Disabilities, applicants may request to review the plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at **************. Protected Veterans and Individuals with Disabilities may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at ************** or by sending an email to ****************. Resumes and applications will not be accepted in this manner. ABB Benefit Summary for eligible US employees [excludes ABB E-mobility, Athens union, Puerto Rico] Go to ****** BenefitsABB.com and click on “Candidate/Guest” to learn more Health, Life & Disability Choice between two medical plan options: A PPO plan called the Copay Plan OR a High Deductible Health Plan (with a Health Savings Account) called the High Deductible Plan. Choice between two dental plan options: Core and Core Plus Vision benefit Company paid life insurance (2X base pay) Company paid AD&D (1X base pay) Voluntary life and AD&D - 100% employee paid up to maximums Short Term Disability - up to 26 weeks - Company paid Long Term Disability - 60% of pay - Company paid. Ability to “buy-up” to 66 2/3% of pay. Supplemental benefits - 100% employee paid (Accident insurance, hospital indemnity, critical illness, pet insurance Parental Leave - up to 6 weeks Employee Assistance Program Health Advocate support resources for mental/behavioral health, general health navigation and virtual health, and infertility/adoption Employee discount program Retirement 401k Savings Plan with Company Contributions Employee Stock Acquisition Plan (ESAP) We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.

Specialized Mobile Exhibits is a privately held, Winston-Salem based company offering custom fabricated exhibits for both private and corporate marketing needs. We design and build ground up projects ranging from small kiosks to 53ft double decker, hydraulic power folding trailers for marketing and entertainment. We take great pride in delivering the best quality product possible while maintaining a fast-paced and enjoyable work environment. Job Summary: We are seeking a well-rounded individual who is creative, passionate about design, and a talented 3D industrial designer. The ideal candidate will have exceptional knowledge of materials and manufacturing processes used in fabrication. Candidate will be responsible for efficiently and effectively developing technical drawings and processes by designing parts/equipment for the fabrication, building and assembling of custom exhibits. He/she builds and maintains effective relationships internally with project teams and externally with client and vendor representatives. Essential Job Functions: Design detailed models/assemblies that will be used for renders for clients and production drawings. Develop detailed fabrication drawing that can be easily understood for both in-house and outsource fabricators. Work alongside project managers and sales to understand client needs and timeline. Work with other designers and team members to find creative solutions for customer needs. Communicate with project managers on purchase needs. Following project through from start to completion. Liaison between all SME departments to ensure quality build per client's specifications. Be able to budget your own time effectively on multiple projects to hit deadlines in a timely manner. Use various technical software tools including: Solidworks, Microsoft Office, and Adobe Suite. Be able to work in a fast passed environment. Position Qualifications: Required High School Diploma 5+ Years of experience developing technical models and drawings for fabrication. PC Skills: Solidworks, MS Office Applications, Adobe Suite. Preferred: Bachelor's Degree or Associate's Degree in design or engineering Required Knowledge and Skills: Strong verbal/written communication skills to materially participate in managing multiple projects Effective organizational skills Strong data-gathering and analytical skills Keen understanding of the product positioning, completive landscape, key benefits and the client needs Ability to understand the level of effort required to achieve results Attention to detail Flexibility as priorities and timelines can shift considerably and frequently Schedule: 8 Hour shift (8:00am-5:00pm) On occasion extra time may be necessary to complete projects. Monday -Friday Work Location: In person (2427 Salem Park Drive, Winston-Salem NC 27127) Benefits: Health Insurance Dental Insurance Vision Insurance Company Match 401K Life Insurance Paid Time Off Short-Term and Long-Term Disability Pay: $60,000.00(+) based on experience. Salaried Position. Essential Physical Functions: While performing the duties of this job, the employee is frequently required to: Stand, walk, stoop, kneel, crouch, and/or crawl Turn the head, neck, and shoulders to both the right and left Able to sit for long periods of time Perform tasks that require adequate manual dexterity in the use of keyboards and keypads, handle or touch objects or controls Talk and listen Reach above shoulders Use the arms and legs to lift and/or move cumbersome items up to 50 pounds Climb a ladder and/or steps to work at a height of approximately 13 feet above the ground Work in close/confined spaces Specific vision requirements include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus Specific hearing requirements include ability to listen to telephone conversations as well as face-to-face conversations The noise level in the work environment is usually moderate Work beyond a 40-hour workweek may be required Specialized Mobilized Exhibits values flexibility and the willingness to take on new challenges. As opportunities arise and work responsibilities change, your job description will be adjusted to meet the organization's needs.

Watch this video to learn more about Pureflow! NC CAD Designer About Our Organization: With over 38 years of experience providing high purity water solutions, Pureflow is committed to serving clients by designing, building, installing and maintaining water purification systems in a broad range of commercial and industrial markets. We understand that a successful business needs quality employees. We are seeking highly talented and motivated candidates to join our company where people, integrity, and excellence are essential to our culture. About the Position: We are seeking a CAD Designer whose job responsibilities include, but are not limited to, the following for water purification and treatment systems and equipment: Job Responsibilities: * Prepare flow diagrams and P&IDs * Prepare equipment layout and utility connection drawings for proposed installation at customer site, taking onsite measurements, as necessary * Prepare skid frame, skid assembly, and subassembly drawings using SolidWorks software * Maintain customer CAD files in an organized manner, using proper version control * Prepare Bills of Materials from fabrication drawings * Prepare as-built drawings for turnover packages * Assist in drawings for new sales projects * Revise drawings during a project, as required, and issue new copies for review * Perform other project design and documentation duties as requested Job Requirements: * Associates or Bachelor's Degree in related technical field preferred * 3 or more years of professional drafting and design experience preferred * Proficient with SolidWorks and AutoCAD * Strong mechanical aptitude coupled with design mindset * Self-motivated, results-oriented, organized, energetic, and capable of staying cool under pressure from multiple ongoing projects * Working knowledge of piping, pipe valves and fittings, and pumps preferred Working Conditions: * Working hours are 7:00am - 5:00pm depending on project load * Usual office working conditions * Occasional local and overnight travel as we serve multiple states Perks: * Competitive base salary * Comprehensive Benefits: Medical, Dental, Vision, Life Insurance, Health Savings Account (with company contributions), and more * $1 for $1 401k match up to 4% * 9 Company-paid holidays * Generous personal time off that increases with tenure * Education assistance * Employee referral bonus program * Ongoing training and development by internal and external industry experts Reports to: CAD Department Lead / Engineering Lead Pureflow is an equal-opportunity employer and requires post-offer, pre-employment drug tests and background checks on all positions. Please visit our website at ******************* for additional information about Pureflow. Key words: SolidWorks, CAD, Mechanical Engineer, Design

Basic Qualifications Requires a Bachelor's degree in Electrical Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a Master's degree plus 3 years of job-related experience. CLEARANCE REQUIREMENTS:: Department of Defense Secret security clearance is obtainable within a reasonable amount of time after hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As an electrical engineer for Undersea Mission Solutions, you'll be a member of a cross functional team responsible for design, simulation, testing, and validation of analog, digital, and mixed-signal circuits. You will work closely with cross-functional teams including PCB layout, firmware, mechanical, and systems engineering to bring products from concept to production. We encourage you to apply if you have any of these preferred skills or experiences: Power electronics design experience Experience with high-speed digital design and signal integrity Familiarity with firmware/hardware integration Experience with design for manufacturability (DFM) and design for test (DFT) What you'll experience: Design and develop analog and digital circuits for new products and system enhancements Perform schematic capture and collaborate with PCB layout engineers Conduct simulations and circuit analysis using tools such as SPICE, LTspice, or PSpice Evaluate and select electronic components for performance, cost, and availability Build and test prototypes; troubleshoot hardware issues at the board and system level Ensure compliance with industry standards and EMC/EMI requirements Support design verification, validation testing, and regulatory certification processes Document designs, specifications, and test reports Collaborate with cross-functional teams including firmware, mechanical, and manufacturing What sets you apart: Proficiency with schematic capture and simulation tools (e.g., Altium Designer, OrCAD, KiCad, etc.) Solid understanding of analog and digital design principles Experience with lab instruments (oscilloscopes, signal generators, multimeters, etc.) Ability to read and interpret datasheets, technical documents, and standards Strong analytical and problem-solving skills Excellent communication and collaboration abilities Our Commitment to You: An exciting career path with opportunities for continuous learning and development. Research oriented work, alongside award winning teams developing practical solutions for our nation's security Flexible schedules with every other Friday off work, if desired (9/80 schedule) Competitive benefits, including 401k matching, flex time off, paid parental leave, healthcare benefits, health & wellness programs, employee resource and social groups, and more See more at gdmissionsystems.com/careers/why-work-for-us/benefits Workplace Options: This position is fully on-site, OR Hybrid/Flex. While on-site, you will be a part of the McLeansville Design Center. #LI-Hybrid Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $118,519.00 - USD $131,482.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Job Description Timmons Group is always accepting applications from experienced Project Engineer II and III candidates to join our team for future opportunities . If we do not have an immediate need at your level in your area if interest, we may hold your resume for future consideration. We typically hire engineers with experience in the following areas: Land Development (Residential, Commercial and Municipal/Government) Water Resources Traffic &Transportation Structural Essential Duties and Responsibilities of a successful candidate include but are not limited to: Design portions of a project using relevant office software, modeling and Civil 3D technology Complete calculations using engineering formulas and skills and/or utilizes computers in order to solve problems Prepare specifications materials through the use of research and manufacturing catalogs to specify materials, installation, inspection and payment of items specific to a project Work to complete design details and plan sets Perform research and writes objective summary reports which are used in the completion of the project work or inspection Assist in the preparation of engineering and construction cost estimates Complete field observation, inspection and data collection duties as directed by senior engineering staff Communicate with client staff and internal design team as directed by senior engineering staff Skills/Requirements of a successful candidate include but are not limited to: A bachelor's or master's degree in Civil Engineering or a closely related degree Ideal candidates would have at least two years of experience in civil engineering, EIT preferred Working knowledge of Civil 3D preferred, and Bentley OpenRoads for Transportation related positions Additional Information The requirements listed are representative of the knowledge, skills and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. We are looking for high energy, creative, flexible, patient, self-starters who are willing to work at a dynamic pace. Candidates must share a commitment to our company's Vision, Mission and Shared Values. Timmons Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, or protected Veteran status. Timmons Group is a full-service engineering and technology firm recognized nationally as a “Best Firm to Work For” by CE News. With over 15 offices throughout the Mid-Atlantic and Southeast, we provide civil engineering, environmental, economic development, GIS/geospatial technology, landscape architecture, and surveying services to a diverse client base. As one of Engineering News Record's (ENR) Top 500 Design Firms for over 30 years, we are dedicated to being an employer of choice and providing our people with the best resources, technology, and culture to help them thrive in an engaging career development setting. For more information, visit ****************

IPS is hiring a Design - HVAC Mechanical Engineer Intern who will join our industry leading team at our Burlington, MA office location. The Design Intern - Mechanical Engineer is involved in the application of engineering fundamentals and project related services in support of design assignments. This developmental position enables the Designer to learn to apply theoretical knowledge to practical application. KEY ACTIVITIES AND RESPONSIBILITIES * Works with assigned design engineers and drafters to execute design drawings and specifications as required in order to support assigned projects. Ensures code and statute compliance in all projects. * Uses computer aided design technologies to develop sketches, drawings, and construction documents. * Routinely archives and retrieves data from electronic database for support of work. * Researches equipment selection from catalogs under the direction of the Project Designer/Engineer. * Expected to become proficient in the use of a computer for Design and CAD applications. * Maintains a neat and organized work area, which allows efficient access to project information required by other team members. * Keeps Project Designer/Engineer aware of workload and requests work when needed. * Special projects as assigned. Qualifications & Requirements REQUIRED EDUCATION/QUALIFICATIONS /WORK EXPERIENCE * Must be pursuing a Bachelor's Degree in design engineering from an accredited technical institution or college. * Proven time management skills in order to juggle more than one project at a time. * Customer Service experience exhibiting strong oral and written communication skills. CONTEXT AND ENVIRONMENT AND SAFETY * Travel duration, if any, is based on project complexity and location. * This position is a safety sensitive position. The employee is designated for field work and attends activities at client sites where they work in construction, process, packaging, manufacturing, research or other "non-administrative" areas. About Us About Us IPS-Integrated Project Services is a global leader in developing innovative and cost effective solutions for the engineering, construction, commissioning and qualification of complex pharmaceutical and biotech research and manufacturing facilities. With technical expertise spanning R&D to pilot-scale to large-scale production, our team specializes in the technology, trends and regulatory environment to successfully deliver capital projects and improve operations. For over thirty years, we have applied unique LEAN methodologies throughout the project life cycle, continually finding ways to do things better and more efficiently, delivering higher quality and controlling costs. Headquartered in Blue Bell, PA, IPS is a multi-national company with over 1,500 professionals worldwide and offices in California, Kansas, Maryland, Massachusetts, New Jersey, North Carolina, Pennsylvania, Brazil, Canada, China, Ireland, Singapore, Switzerland, Germany, United Kingdom and four locations in India. Visit our website at ************** Specialties Process Architecture, Process Design, Engineering, Construction, Commissioning, Qualification, LEAN Project Delivery, Strategic Master Planning, Energy Conservation Management, Project Controls, Program/Project Management, Operations/Logistics Strategy and Planning, EPCMV and Staffing Services. IPS is an equal opportunity, affirmative action employer of protected veterans (M/F/D/V). Attention Search Firms / Third Party Recruiters: IPS is not seeking assistance or accepting unsolicited resumes from search firms for employment opportunities with IPS. Regardless of past practice, all resumes submitted by search firms to any employee at IPS via-email, the Internet or directly to hiring managers at IPS in any form without a valid written search agreement in place for a specific position will be deemed the sole property of IPS, and no fee will be paid in the event a candidate is hired by IPS as a result of the referral or through other means. REQUIRED EDUCATION/QUALIFICATIONS /WORK EXPERIENCE * Must be pursuing a Bachelor's Degree in design engineering from an accredited technical institution or college. * Proven time management skills in order to juggle more than one project at a time. * Customer Service experience exhibiting strong oral and written communication skills. CONTEXT AND ENVIRONMENT AND SAFETY * Travel duration, if any, is based on project complexity and location. * This position is a safety sensitive position. The employee is designated for field work and attends activities at client sites where they work in construction, process, packaging, manufacturing, research or other "non-administrative" areas. IPS is hiring a Design - HVAC Mechanical Engineer Intern who will join our industry leading team at our Burlington, MA office location. The Design Intern - Mechanical Engineer is involved in the application of engineering fundamentals and project related services in support of design assignments. This developmental position enables the Designer to learn to apply theoretical knowledge to practical application. KEY ACTIVITIES AND RESPONSIBILITIES * Works with assigned design engineers and drafters to execute design drawings and specifications as required in order to support assigned projects. Ensures code and statute compliance in all projects. * Uses computer aided design technologies to develop sketches, drawings, and construction documents. * Routinely archives and retrieves data from electronic database for support of work. * Researches equipment selection from catalogs under the direction of the Project Designer/Engineer. * Expected to become proficient in the use of a computer for Design and CAD applications. * Maintains a neat and organized work area, which allows efficient access to project information required by other team members. * Keeps Project Designer/Engineer aware of workload and requests work when needed. * Special projects as assigned.

Are you looking for a new challenge within engineering? Maybe this job as a R&D Engineer in Winston Salem, NC is for you! Amarr, part of global opening solutions leader ASSA ABLOY, is searching for an experienced R&D Engineer to design and develop various systems and components related to residential garage doors. Assignments will be broad in nature, usually requiring initiative, originality, ingenuity and excellent problem-solving skills. Essential Functions: Product designer for major Pre Product Innovation (PPI), New Product Innovation (NPI), and Continuous Product Innovation (CPI) development projects. Work closely with internal and external company design, application and manufacturing engineering resources, designing with system-wide perspective. Lead, participate in or support the following product development activities: Concept, planning, design and execution stages of major new products or product enhancements Risk assessment Prototyping and testing concept designs and initial engineering builds Pilot Production Design reviews Design verification testing Product validation and usability testing Pre-production Create and release Product Requirements, Design Specifications and Design Descriptions for assigned projects. Regular review of the competitive market and products, including interfacing with customers, as well as current and future market needs. Interact with global and internal design and manufacturing resources to design for manufacturability, reliability and cost-effectiveness. Qualifications and Requirements: Bachelor's degree in Mechanical Engineering or related. 5-7 years minimum experience in the design and development of manufactured products Experience working in cross-disciplinary teams. Experience with roll formed and stamped thin gauge steel and molded/extruded plastic and rubber component design AutoCAD Inventor, Solid Works experience Experience with rapid prototype design and build for proof of concept and usability testing a plus. Knowledge in the selection of various materials and adhesives along with experience designing roll formed, extruded, and molded components and product assemblies are key areas that will set apart potential candidates. Benefits include Medical/Dental/Vision, Paid Time Off, Paid Holidays from day one, tuition reimbursement, and a 401k plan (with an automatic 3% company contribution, regardless of your contribution) among others. Our goal is to be a world-leading company that attracts diverse talent, where all team members feel safe being their true selves and are able to thrive in a work environment that promotes change, innovation, and provides equal access and opportunity. As one of North America's leading garage door manufacturers, Amarr Company takes pride in fostering a culture where employees enjoy many opportunities for career growth, rapid advancement, and relocation to some of America's most desired cities. Although Amarr Company is an international business, employees enjoy a family-oriented, caring culture and rewarding work environment. Amarr Company offers competitive wages, generous benefits, and a bonus program for every employee. At Amarr Company, the door is always open and there is no ceiling to your career growth. #amarrcareers All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Amarr is an E-Verify participant.

Are you someone who is ready to dive right in and make an impact on exciting multimillion-dollar projects? If so, we are looking for motivated candidates to join our innovative team! Working alongside Project Managers and Estimators, you will assist in all aspects of the estimating and project management process. If you are self-motivated, and like to problem-solve, multi-task, and assume ownership of your work, contributing to the success of our projects, then apply today! Position Responsibilities: Assist in the estimating process as directed, including attending pre-bids, quantity take-offs, sub-bid solicitations Develop and update both a master and short interval schedule for distribution project control Provide weekly submission of quantities installed to be used for productivity reporting Complete document control procedures (Drawing Log) including issuance of relevant documents to sub trades Compile and submit required submittal packages with shop drawings for approval followed by completion and update of the submittal log Compile and track material status log Compile and update project punch list or issues matrix Review weekly productivity reports for potential areas of improvement with the Project Manager and Superintendent and suggest changes as needed Assist with coordinating sub-bid solicitations and procuring resources such as suppliers, manpower, and equipment Assist the Project Manager and Superintendent in daily coordination of subcontractors and suppliers Ensure proper documentation for any additional work Assist the Superintendent to ensure completion of “As Built” drawings Assist the Project Manager and Superintendent in completing project closeout requirements Maintain project file and shop drawing processing and assigned contract administration duties Prepare submittal package compilation Assist with financial management by writing and issuing change orders, approving material invoices, and tracking material, labor and equipment

Job Description The Project Engineer oversees the planning and execution of small-scale electrical and mechanical projects, including estimating and tracking budgets. This role focuses on driving technical improvements in coordination with the Technical, Operations, and Strategic Projects teams. Responsibilities Lead and implement technical improvement projects within budget and timeline. Work with other departments and provide technical support as needed. Create and manage project charters with clear scope, tasks, and deadlines. Oversee project execution, including follow-up, documentation, and training. Use MS Office, CAD, and project management tools to complete tasks efficiently. Qualifications 2 to 3 years of experience in a Project Engineer role. Background in food processing or light industrial manufacturing is an advantage. Practical experience working with mechanical systems, pneumatics, hydraulics, electrical, and electronic components. Demonstrated ability to lead and manage project teams. Skilled in using CAD software, Microsoft Project, Excel, and PowerPoint. Well-versed in OSHA safety regulations and compliance standards. Bachelor's or Master's degree in Engineering, or equivalent technical training in electrical, electro-mechanical, or mechatronics disciplines. PMP certification is preferred; Lean Six Sigma Green Belt is considered an asset. Strong proficiency in written and spoken English. Additional language skills in Dutch, French, Spanish, or German are an advantage.

Manufacturing Engineer BH Job ID: 3617 SF Job Req ID: 16659 Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Manufacturing Engineer Location: Mocksville, NC About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: In this role as a Manufacturing Engineer, you will play a pivotal role in enhancing the efficiency and effectiveness of production processes. The Manufacturing Engineer is tasked with designing and refining manufacturing methods to boost productivity while maintaining high-quality standards and ensuring safety protocols. They work closely with various departments, such as design, quality, and operations, to implement improvements that reduce costs and streamline workflows. Responsibilities: * Suggests, evaluates, implements & manages multiple manufacturing projects from beginning to end * Evaluates, develops and implements machining processes on current or future assets * Implements capital equipment including evaluation, selection, run-offs, and implementation * Maintains manufacturing best practices including precision machining, lean manufacturing, and machine tool / tooling technologies * Evaluates non-conforming material and provides proper disposition * Leads special projects including NPD, insourcing, productivity and capital procurement * Designs tooling, gages and fixtures using 3D modeling software * Develops manufacturing routings internal and sub-con operations * Leads machine tool installations throughout the entire process * Supports production efforts through troubleshooting manufacturing issues * Ensures compliance with ISO 9001:2015 standards * Supports safety and environmental practices * Performs other duties assigned by immediate supervisor Requirements: * Bachelor's degree in manufacturing, Industrial or Mechanical engineering. * 4+ years of experience in manufacturing engineering. * Strong analytical ability to solve issues such as: manufacturing problems and dimensional or calculation errors. * Solid understanding of electro-mechanical assembly and machining processes and overall business operations. * Fluent using inspection tools, techniques and their application to the engineering requirements. * Comprehensive understanding of machine tool operations. * In-depth knowledge of CNC Programming, CAD / CAM / CAE, MS Office Software, and MS Project. * Competent in advanced engineering drawings including GD&T and tolerance analysis. Core Competencies: * Technical Expertise: knowledge of manufacturing processes and technologies. * Problem-Solving: Analytical skills to develop effective solutions. * Project Management: Ability to manage projects from start to finish efficiently. * Collaboration: Experience working with cross-functional teams. * Continuous Improvement: Familiarity with Lean Manufacturing and Six Sigma. * Attention to Detail: To ensure quality and compliance. * Innovation: Creative thinking to introduce new manufacturing solutions. * Leadership: Ability to train and guide production staff. * Safety Awareness: Strong understanding of and commitment to safety protocols. Preferences: * Ability to prioritize tasks, and carry out root cause analysis. * Ability to communicate at all levels internally, customers and suppliers. * Knowledge of Lean Manufacturing Techniques and ability to create standard work. * Fluent using inspection tools, techniques and their application to the engineering requirements. * Proficient in gear or helical grinding. * Understanding of rotary screw compressors and/or centrifugal compressors. * Excellent communication and interpersonal skills. Travel & Work Arrangements/Requirements: * Onsite with up to 15% travel. What We Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit *************

- Design and develop structures, subassemblies, and mechanical components of truck and trailer bodies or ambulances using CAD software (Solid Edge, SolidWorks or AutoCAD Inventor preferred). - Create detailed 3D models of sheet metal parts, assemblies, and manufacturing drawings with appropriate tolerances and material specifications. - Perform engineering calculations and analyses (structural, load, and performance) to validate designs. - Support production through technical drawings, BOMs, process documentation, and engineering change management. - Collaborate cross-functionally with manufacturing, purchasing, and quality departments to ensure design intent is maintained through production. - Review and improve existing designs for manufacturability, cost efficiency, and durability. - Research materials, components, and manufacturing methods for potential implementation in future designs. - Participate in prototype builds and testing to evaluate design performance and validate design changes. - Ensure compliance with applicable safety, regulatory, and customer standards. - Provide technical support for field issues and product improvement initiatives. Mechanical Engineer Minimum Qualifications: - Bachelor's degree in mechanical engineering or equivalent - 3-5 years of prior work experience within a manufacturing setting outside of college or internships. - Software experience required: o Solid Edge o SolidWorks - MS Office product knowledge (Word, Excel, PowerPoint, Outlook) Job Type & Location This is a Permanent position based out of High Point, NC. Pay and Benefits The pay range for this position is $70000.00 - $80000.00/yr. Have copy of benefits to share. Workplace Type This is a fully onsite position in High Point,NC. Application Deadline This position is anticipated to close on Jan 16, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Job Role: Imaging Service Engineer Experience required: 3 Years Work Authorization: US Citizen and Green Card What You'll Do: Install, maintain, calibrate, and repair complex diagnostic imaging equipment including but not limited to CT, C-arm, portable X-ray, and ultrasound systems. Utilize technical and customer service skills to assess and resolve imaging equipment issues efficiently. Collaborate with clinical staff and other healthcare professionals to identify and resolve equipment-related issues. Document service activities and maintain accurate records within the department's tracking systems. Participate in on-call rotation schedule and provide emergency support as needed. Position Summary: Inspect, repair, maintain, and calibrate basic diagnostic imaging equipment, devices, system, and instruments. Interact on a routine basis with other clinical health providers in the identification of technology-based problems. MUST HAVE: Associates Degree (or equivalent experience) in electronics, biomedical engineering, or other technical discipline contributing to proficiency of maintenance and repair of imaging equipment within a healthcare environment 3 years of experience within a healthcare setting with direct responsibility for the maintenance and repair of clinical devices and/or 1 year of imaging equipment repair and maintenance within a healthcare environment and/or entry level of formalized training and/or equivalent military training. Demonstrated expertise in troubleshooting and resolving technical issues with imaging equipment. Proficiency with common test equipment, tools, and diagnostic software. Experience working in a hospital or healthcare environment. Please share your resume ASAP

Timmons Group is seeking qualified Civil Project Engineer I candidates for in our Greensboro, NC office. A Civil Project Engineer I is responsible for designing, building, supervising, operating, and maintaining large construction projects and systems, including roadways, piping systems, utilities, land grading specifications, and other infrastructural systems for commercial and residential building sites. Timmons Group is currently seeking candidates for the Land Development group. Essential duties and responsibilities of a successful candidate include but are not limited to: * Design portions of a project using relevant office software, modeling and Civil 3D technology * Complete calculations using engineering formulas and skills and/or utilizes computers in order to solve problems * Prepare specifications materials through the use of research and manufacturing catalogs to specify materials, installation, inspection and payment of items specific to a project * Work to complete design details and plan sets * Perform research and writes objective summary reports which are used in the completion of the project work or inspection * Assist in the preparation of engineering and construction cost estimates * Complete field observation, inspection and data collection duties as directed by senior engineering staff * Communicate with client staff and internal design team as directed by senior engineering staff Skills/Requirements of a successful candidate include but are not limited to: * A bachelor's or master's degree in civil engineering or a closely related degree with coursework in land development, and/or water resources preferred * EIT preferred * Working knowledge of AutoCAD Civil 3D

Watch this video to learn more about Pureflow! NC Project Engineer If you enjoy a variety of challenges, a healthy and productive work environment, and making an impact, then come join our team. Who We Are: Design, Build, Install High Purity Water Systems across a variety of industries Service and Customer Focused Team Oriented Experts in the Industry Strong Culture What We Offer: Work atmosphere that encourages teamwork, integrity, and excellence Training, tools, and support for employees' development Trajectory of personal and professional growth Market-competitive and experienced-based compensation Generous benefit package Who You Are: Strong mechanical aptitude or interests Are self-motivated Enjoy learning new technologies Find energy and joy in problem solving Familiar with mechanical components (pumps, valves, piping, flanges, etc.) Capable of handling multiple ongoing projects simultaneously Enjoy working independently and with a team Experience: 3+ years of experience working in an engineering or technical role S. in Mechanical Engineering, Industrial Engineering, Chemical Engineering Water treatment experience preferred but not required Job Responsibilities: Work with business developers, engineers, and shop personnel to develop preliminary equipment design plans and cost estimates for new products or refurbished equipment projects Design systems and size components; develop piping and instrumentation diagrams (P&IDs) Work with CAD designers to produce detailed engineering drawings Specify and work with purchasing to procure system components Prepare and oversee project documentation including drawings, spec sheets, O&M manuals, and validation documents Attend and support system start-ups, includes onsite operation, testing and troubleshooting of newly installed equipment Support with sales strategy, generate technical brochures, presentations and any other supporting documents needed for new project opportunities Benefits: 401(k) with matching Medical insurance Dental Insurance Short-term & Long-term Disability Insurance Health savings account Life insurance Paid time off Referral bonus program Tuition reimbursement Please visit ******************* to learn more about Pureflow: who we are and what we do. Pureflow is an equal-opportunity employer and requires post-offer, pre-employment background checks and drug tests on all positions.

Do you have 3-5 years of Solid Edge or Solid Works job experience? Are you interested in a hands-on metal manufacturing design job? If so, consider joining us as our newest Mechanical Engineer. In this position you will work with a growing engineering team to design emergency vehicle bodies and trailers for a leader in the field. Experience a challenging, rewarding job at a caring company with excellent benefits. Mechanical Engineers Primary Responsibilities: - Design and develop structures, subassemblies, and mechanical components of truck and trailer bodies or ambulances using CAD software (Solid Edge, SolidWorks or AutoCAD Inventor preferred). - Create detailed 3D models of sheet metal parts, assemblies, and manufacturing drawings with appropriate tolerances and material specifications. - Perform engineering calculations and analyses (structural, load, and performance) to validate designs. - Support production through technical drawings, BOMs, process documentation, and engineering change management. - Collaborate cross-functionally with manufacturing, purchasing, and quality departments to ensure design intent is maintained through production. - Review and improve existing designs for manufacturability, cost efficiency, and durability. - Research materials, components, and manufacturing methods for potential implementation in future designs. - Participate in prototype builds and testing to evaluate design performance and validate design changes. - Ensure compliance with applicable safety, regulatory, and customer standards. - Provide technical support for field issues and product improvement initiatives. Mechanical Engineer Minimum Qualifications: - Bachelor's degree in mechanical engineering or equivalent - 3-5 years of prior work experience within a manufacturing setting outside of college or internships. - Software experience required: o Solid Edge o SolidWorks - MS Office product knowledge (Word, Excel, PowerPoint, Outlook) - Epicor ERP - Able to responsibly handle confidential information. Mechanical Engineer Preferred Qualifications: - Strong understanding of mechanical design principles, fabrication methods, and structural analysis. - Knowledge of materials (steel, aluminum, composites) and their applications in vehicle manufacturing. - Understanding of structural adhesives and their uses. - Ability to interpret engineering drawings, specifications, and standards. - Strong problem-solving, analytical, and organizational skills. - Excellent communication and teamwork abilities. - Familiarity with manufacturing processes such as welding, forming, and assembly. - Experience with Epicor ERP systems a plus. Work Environment: Manufacturing Work Environment that will at times provide exposure to weather, noise intensity level, and proximity to moving mechanical parts. Physical Demands: - While performing the duties of this job, the employee may be required to routinely sit, stand, walk, talk, and hear, use hands and fingers to keyboard, turn handles, feel, stoop, kneel, crouch, twist, crawl, reach, and stretch. - The employee occasionally moves around the office and enters the manufacturing areas. - Specific vision abilities required for this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. - The employee may occasionally lift and/or move up to 30 lbs. Additional Skills & Qualifications - Bachelor's degree in mechanical engineering or equivalent - 3-5 years of prior work experience within a manufacturing setting outside of college or internships. - Software experience required: o Solid Edge o SolidWorks - MS Office product knowledge (Word, Excel, PowerPoint, Outlook) - Epicor ERP - Able to responsibly handle confidential information. Job Type & Location This is a Permanent position based out of High Point, NC. Pay and Benefits The pay range for this position is $70000.00 - $80000.00/yr. Have copy of benefits to share. Workplace Type This is a fully onsite position in High Point,NC. Application Deadline This position is anticipated to close on Jan 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.