Design engineer jobs in Lehi, UT - 643 jobs

CoreBrace Project Engineers play a key role in designing Buckling Restrained Braces (BRBs). These designs are based on a deep understanding of braced frame performance, supported by theory, full-scale testing, and advanced analysis tools. Our engineers work closely with Structural Engineers of Record (SEORs) during a project design phase and collaborate with steel fabricators, detailers, and general contractors throughout the project lifespan. At CoreBrace, you'll have the chance to contribute to all kinds of exciting projects worldwide-from cutting-edge NFL stadiums to intricate mass timber offices. ABOUT US: CoreBrace designs and fabricates the industry-standard Buckling Restrained Braces (BRBs). We are dedicated to being the best in the business and our braces are manufactured in the USA. Visit ********************** to learn more. CoreBrace is a division of SME Industries, Inc. Why Join Us? Health and Wellness Benefits including Medical, Dental, Vision, Short Term Disability and Life Insurance. Financial Benefits including competitive compensation and 401(k) plan. Additional Benefits including Paid Holidays and Paid Time Off, Employee Assistance Program, and more. ESSENTIAL DUTIES AND RESPONSIBILITIES: Design of specialty structural elements known as Buckling Restrained Braces (BRBs) and their connections. Design of gusset plates and verification of local effects in frame members. Analysis of relevant project documents to ensure compliance with project specific design requirements. Design coordination with the Structural Engineers of Record (SEORs) responsible for the overall design of structures that use BRBs. Coordination with members of design and construction teams (SEORs, Architects, steel fabricators, detailers, erectors, GCs, etc.) during all stages of assigned projects. Generation of deliverable documents, such as design drawings and calculation packages. Review and verification of shop drawings. Response to Requests for Information (RFIs) from the field and/or from the shop as required during installation and manufacturing. Addressing of plan check and/or peer review comments pertinent to the design of BRBs. Performing of other occasional duties as assigned, including but not limited to assistance with bidding/pricing, occasional traveling, marketing, and Research and Development (R&D) related activities. QUALIFICATIONS: Bachelor's degree or higher in Civil or Structural Engineering. Professional Engineer (PE) license or ability to obtain one preferred. Understanding of current building codes and standards, engineering fundamentals, and structural load paths. Familiarity with seismic and structural steel design preferred. Proficiency with MS Office tools (Word, Excel, PowerPoint, etc.) Operational knowledge of commercial structural analysis software preferred (RAM SS, ETABS, RISA, etc.) Attention to detail and strong focus on quality. Strong oral and written communication skills. Ability to work independently in a dynamic, team-oriented environment. PHYSICAL DEMANDS: Must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Ability to sit for extended periods of time while working at a desk or computer, with regular use of hands and fingers for typing, using a computer mouse, and handling documents. Occasional lifting and moving files or office supplies, typically up to 20 pounds. WORK ENVIRONMENT: Primarily works in a standard office environment with minimal exposure to temperature changes. Involves interaction with colleagues and participation in meetings, both in-person and virtual. Position Responsibilities: This job posting reflects the current assignment of essential functions and is not meant to be all-inclusive. Duties and responsibilities may be assigned or reassigned to this position at any time. Equal Employment Opportunity: SME Industries, Inc. and its divisions (SME Steel Contractors, Southwest Steel, CoreBrace, DuraFuse, and SME Logistics) is an Equal Opportunity (EEO) Employer. All qualified applicants will receive consideration without regard to race, color, national origin, sex, sexual orientation, gender identity, religion, age, status as a protected veteran, status as an individual with disability, or any other protected group status or non-job-related characteristic as directed by law. Employment Authorization: Applicants must be legally authorized to work in the United States. Proof of eligibility will be required upon hire.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Responsibilities: As a Mechanical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team. You will also gain knowledge of various aspects of a refinery by working with a team of professionals who run a specific portion of the refining process. Most often, Mechanical Engineers will have an opportunity to work on more than one area of the refinery, leading to a broad understanding of how the plant operates. Finally, you will have the opportunity to expand your written and verbal presentation skills in a professional work environment. The majority of Mechanical Engineering co-ops and interns enter into the following positions: Area Refining Engineer/Project Engineers develop and use project management skills to create project scopes, estimates, and schedules. Once a project is developed and approved, you, as the project manager, will oversee the design effort and assist in the construction process. MPC will provide training and educational opportunities to help you develop your knowledge of other engineering disciplines. We are committed to developing engineers into professional project managers who can successfully manage projects of all sizes. Reliability Engineers support the refinery's Maintenance Department through design and development of equipment related improvements. Such improvements include root cause failure analysis, optimization of maintenance programs in rotating equipment (pumps, compressors, etc.), and troubleshooting fixed equipment (refinery pressure vessels, heat exchangers, piping systems, etc.). Reliability Engineers will also be continuously challenged to find new technology in design, materials and repair methods to achieve refinery goals of longer running times at lower costs. Qualifications: + Candidates must be majoring in Mechanical Engineering or Civil Engineering + Strong academic performance + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Positions are available spring, summer, and fall semesters + Availability for multiple work terms is preferred + A valid driver's license is required + Concurrent enrollment in a degree seeking program + Military experience a plus + MIN - $32.92 per hour / MAX - $41.67 per hour Learn more about Marathon Petroleum's benefits at ********************* As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00018185 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Anacortes, Washington, Canton, Ohio, Catlettsburg, Kentucky, Detroit, Michigan, El Paso, Texas, Garyville, Louisiana, Kenai, Alaska, Mandan, North Dakota, Martinez CA Refinery, Robinson, Illinois, Salt Lake City, Utah, St Paul Park, Minnesota, Texas City, Texas, Wilmington, California Education: High School (Required) Employee Group: Full time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Mission Systems is a trusted provider of mission-enabling solutions for global security. We have a wide portfolio of secure, affordable, integrated, and multi-domain systems and technologies. Our differentiated battle management and cyber solutions deliver timely, mission-enabling information and provide superior situational awareness and understanding to protect the U.S. and its global allies. Northrop Grumman Mission Systems is looking for you to join our team as a Manufacturing Engineer based in Salt Lake City, Utah. As a member of the Systems Manufacturing Engineering team, you will support manufacturing operations to produce precision, high-quality, inertial measurement and navigation systems. What you will get to do: Interact frequently with production operators to understand and troubleshoot manufacturing issues and receive inputs on potential process improvements. Create process flow diagrams and define the sequence of operations for build instructions. Support investigations of production issues to determine root causes and complete actions to address material deficiencies, equipment malfunctions, and assembly process errors. Perform critical evaluations of new systems designs and provide inputs to design and materials engineering regarding manufacturability. Provide technical inputs for supplier capability assessments. Develop and improve manufacturing processes while considering cost/benefit analysis. Utilize statistical process control and data driven methods to guide process, yield, and cost improvements. Basic Qualifications for the Manufacturing Engineer: A Bachelor's degree in physics, engineering or a related STEM field with 2 or more years of relevant work experience; OR a Masters degree in physics, engineering or a related STEM field with 0+ years of relevant work experience. Experience working in an engineering environment supporting manufacturing processes Experience performing basic troubleshooting of production issues related to process, equipment, or materials Experience reading and understanding engineering drawings, specifications, and parts lists Experience using Microsoft Office Products (Word, PowerPoint, Excel, MS-Project) Ability to obtain and maintain a Secret clearance US Citizenship is required Preferred Qualifications for the Manufacturing Engineer: Experience providing direct engineering support for assembly equipment, processes, and materials Experience supporting the implementation of new products into manufacturing Experience working in a highly regulated industry with strict customer/process requirements Experience in defense or related industry Experience with computer aided design tools such as SolidWorks and AutoCAD Project management experience (work breakdown, task planning and scheduling etc.) Experience providing direct engineering support for electro-mechanical, and optical assembly equipment and processes What We Can Offer You: Northrop Grumman provides a comprehensive benefits package and a work environment which encourages your growth and supports the mutual success of our people and our company. Northrop Grumman benefits give you the flexibility and control to choose the benefits that make the most sense for you and your family. Your benefits will include the following: Health Plan, Savings Plan, Paid Time Off and Additional Benefits including Education Assistance, Training and Development, 9/80 Work Schedule (where available), and much more! Primary Level Salary Range: $72,100.00 - $108,100.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Based in Park City, UT, Triumph Geared Solutions is a leading independent aerospace gear and gear box supplier for the commercial and military helicopter and business jet markets and employs approximately 200 employees. The Company's key products and services include power transmission systems, integrated gearbox design and builds, airframe mounted accessor drives (AMAD's), engine mounted accessory drives (EMAD's), rotorcraft transmissions, turboshaft internal gearboxes, emergency power gearboxes, and large complex aero gears for both OE and aftermarket/spares end markets. Park City, UT lies east of Salt Lake City in the western state of Utah. Framed by the craggy Wasatch Range, it's bordered by the Deer Valley Resort and the huge Park City Mountain Resort, both known for their ski slopes. Overview Triumph is actively seeking a Summer 2026 Design Engineering Intern to support a range of technical responsibilities in a fast-paced manufacturing production environment. The intern position will aid in the engineering teams' goals which will include be a variety of technical and problem-solving tasks. The internship provides a college-level student with practical experience related to their major that will enhance and complement classroom learning. Responsibilities * Use Computer-Aided Desing programs to design Aerospace parts and finite element analysis tools to evaluate part performance against technical specifications. * Investigate new additively manufactured metal alloys for strength fatigue resistance and damage tolerance to determine the material suitability to the company's performance requirements. * Prepare and participate in design reviews and program updates to communicate these findings to customers. * Review of technical drawings and critical documents for suppliers. * Tasks may also include aiding in assembly, test, test fixture updates and manufacturing improvements * Additional duties as assigned Qualifications * Rising Junior or Senior * Pursuing a bachelor's degree in Engineering * Work effectively in a team environment and maintain flexibility. * Excellent analytical and problem-solving skills * Experience in the design of rotating equipment including any gear design is preferred. * Understand manufacturing processes such as milling, turning, grinding, plating, and heat treatment of metals is desirable * Working knowledge of Geometric Dimensioning and Tolerancing is beneficial * Proficiency in CAD is desirable, experience with Pro-engineer is beneficial * CREO, Ansys, LABVIEW is beneficial * Microsoft Excel, and Word * Strong writing aptitude Additional Information All Positions at Triumph Geared Solutions require access to information or technology that is subject to the International Traffic in Arms Regulations (ITAR) and other US government security regulations. These laws do not permit access rights to non-US Citizens or to other unauthorized individuals. Therefore, presently all applicants must be US Citizens or US Permanent Residents (*green card holders*) and/or otherwise comply with ITAR requirements for access rights to be considered for a position. Pursuant to International Traffic Arms Regulations ("ITAR") and the Export Administration Regulations ("EAR"), applicants for SELECT positions will be required to provide proof of U.S. Citizenship, U.S. Permanent Residence, or U.S. Immigration Status in order to meet the minimum qualifications for those select positions. All inquiries related to citizenship are asked solely to comply with ITAR and EAR export licensing requirements. Legally authorized to work in the United States without company sponsorship. Benefits: * Comprehensive medical, dental and vision coverage with plan options that provide flexibility and choice (including telehealth options) * Healthcare spending accounts * Paid parental leave * Paid/flexible time off in addition to paid company holidays * 401(k) with company match * Disability and life insurance * Incentives and performance-based rewards * Exciting growth and development opportunities empowered by our TRIUMPH Transformation and an entrepreneurial environment that encourages innovation and creativity Work Environment and Physical Demands: The work environment characteristics and physical demands described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk, or hear. The employee frequently is required to stand, walk, and use hands to finger, handle, or feel objects, tools, or controls. The employee is occasionally required to reach with hands and arms: stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Our Vision: As one team, we enable the safety and prosperity of the world. Our Mission: We partner with our Customers to TRIUMPH over their hardest aerospace, defense, and industrial challenges to deliver value to our stakeholders. Our Values: * Integrity - Do the right thing for our stakeholders. We value safety, diversity, and respect. * Teamwork - Win as One team-one company. Solicit help and assist others. * Continuous Improvement - Pursue zero defect quality. Attack problems and relentlessly raise the bar. * Innovation - Passion for growing the business. Lead through ingenuity and entrepreneurship. * Act with Velocity - Partner, anticipate and communicate. Proactively solve problems. Code of Conduct: To perform the job successfully, an individual should demonstrate the TRIUMPH behaviors captured within our core values: Integrity, Teamwork, Continuous Improvement, Innovation, and Act with Velocity. Detailed definitions are below and performance metrics for each behavior can be found on our intranet and is embedded within our Performance Management processes. All employees are expected to represent the values and maintain the standards contained in TRIUMPH's Code of Conduct. Environmental, Health, and Safety (EHS): Employees are responsible for the Health, Safety, and Welfare of themselves, the environment, and other people. All employees must comply with EHS policy training and instructions, help to maintain a safe and clean working environment, and use any Personal Protective Equipment (PPE) provided by the Company. Employees must report any accidents, incidents, and near misses to management. Additionally, employees are expected to notify management of any dangerous or potentially dangerous situations or practices. Additional Information: Triumph is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. SELECT US positions require access to technology, materials, software or hardware that is controlled by US export laws including the International Traffic in Arms Regulations ("ITAR") and the Export administration Regulations ("EAR"). In order to be eligible for applicable positions, you must be a US Person under ITAR or eligible for approval for a U.S. Government export license. A US Person is a US Citizen, Lawful Permanent Resident, refugee or asylee. All inquires related to citizenship are asked solely to comply with ITAR and EAR export licensing requirements. U.S. applicants must be legally authorized to work in the United States without company sponsorship. Please contact us if you require assistance in applying for TRIUMPH and we will provide reasonable accommodations via *****************************. Nearest Major Market: Salt Lake City

CAD/CAM Specialist At Ortho Development, we help people do what they love by restoring mobility through innovative orthopedic hip and knee solutions. From our headquarters in Draper, Utah, we're proud to provide meaningful work with a strong, collaborative culture where every team member can make a difference. Here, you'll find teammates who care, leadership that listens, and opportunities to learn, grow, and succeed. We offer competitive benefits, a workplace environment designed to help you thrive and promote work-life balance. As a CAD/CAM Specialist, you will lead the planning, development and execution of manufacturing processes. You will collaborate with manufacturing engineers, product development engineers, and operations specialists to determine optimal manufacturing methods, develop manufacturing procedures, perform process validations and track/report the progress of assigned projects. As the CAD/CAM Specialist you will also support development projects for DFM, new manufacturing technology integration, cost/continuous improvement.. This full-time onsite position is available to start immediately and is a great opportunity in the exciting medical device industry. Location: Onsite - Draper, UT Schedule: Monday- Friday Your responsibilities: Set up, program and run 3-5 axis CNC machining center to manufacture medical devices Follow documented procedures and work instructions to manufacture quality parts Develop machining fixtures for the manufacture of complex medical devices Conduct process validations, make process adjustments and assist in completion of PFMEAs. Aids in the selection of new manufacturing equipment Strong adherence to quality requirements per the QMS Follow safety standards Keep work station and environment organized and clean (5S) Support operations with troubleshooting of secondary processes e.g., lasermarker, grit blaster, buffing tools, etc. Support manufacturing with primary operations of CNC equipment including set-ups, offsetting, and changeovers Develop CNC programs and fixturing for new product launches Support product development in the manufacture of prototype devices as needed Identify and participate in continuous improvement programs Perform other job-related duties as assigned Requirements: Bachelor of Science degree in engineering technology or related field (preferred) Machining certificate or trade school 10+ years experience in CNC manufacturing environment Use of inspection equipment, e.g. calipers, microscope, optical measurement Experience machining castings, forgings, 3D printed components, stainless steel, cobalt, chrome, titanium, and other exotic alloys Operation of manual and coordinated measuring machines Experience with manual mill and lathe CREO or equivalent Cad/Cam system experience 5+ years experience with 5 axis milling/turning programming Macro programming & post building experience Advanced understanding of GD&T Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Employee discounts Flexible spending account Health insurance Life insurance Paid Holidays Paid time off Parental leave Tuition reimbursement Vision insurance Wellness incentives UTA Transit Pass

Brown and Caldwell's (BC) Salt Lake City office has an exciting opportunity for a Project Engineer/Resident Engineer with experience in construction of complex water and wastewater infrastructure and facilities. Candidate will work closely with members of the project team, including the Owner, BC CM group, subconsultants, multiple contractors, and design engineers to ensure the successful delivery of projects. We are seeking a self-motivated individual who enjoys the variety of opportunities available in engineering and construction consulting. Positive interaction with clients and contractors and good working knowledge and understanding of construction are essential to candidate success. Work location will be in the Salt Lake City area, with ability to provide similar support for other local and regional clients. Detailed Description: This position offers the opportunity for significant professional growth and the potential to collaborate with local and national teams. We are looking for candidates who have a passion for building things of high quality, on time and under budget, meeting new people, and a desire to work collaboratively with seasoned professionals. Primary responsibilities include: * Construction Management and Oversight: Provide construction management oversight and onsite Resident Engineering for water, wastewater, and infrastructure projects. Perform onsite inspections to ensure compliance with plans, specifications, standards, codes, and permits. Ensure quality construction standards and proper techniques. * Project Coordination and Collaboration: Facilitate effective partnerships with all project stakeholders. Collaborate with in-house and third-party Design Project Managers, Construction Manager, Resident Engineer, and Contractor's project manager to address design and construction issues. Obtain daily updates from Construction Inspectors and drive resolution to issues. * Documentation and Reporting: Review design and bidding documents for completeness, constructability, and biddability. Conduct file reviews for required paperwork. Prepare and review project documentation, daily reports, and project correspondence. Generate change control forms, change orders, and detailed monthly board updates. * Meetings and Reviews: Attend pre-construction meetings to review and discuss contract requirements. Review and become familiar with project contract requirements and schedule. Review construction work progress daily and respond to submittals and RFIs. * Problem Solving and Compliance: Investigate engineering and construction issues to determine potential solutions and implications. Ensure compliance with health and safety training requirements. Review and analyze contractor's schedule and project plans for local codes. Maintain project records required for project close-out. * Commissioning and Testing: Lead and assist with commissioning, testing, and start-up of process systems/equipment or facilities. * Mentorship and Supervision: Mentor, supervise, and provide direction for less experienced staff. Be proactive in finding identification, management, mitigation, and problem-solving. Coordinate to resolve issues in the field with clients/owners, consultants, contractors, and designers. Desired Skills and Experience: * BS degree, in Civil Engineering, Mechanical Engineering, or related field, * Minimum of 6 years of increasingly responsible, professional experience in the construction and administration of municipal infrastructure, water, and wastewater facilities. * Thorough working knowledge of civil, structural, architectural, process and building mechanical and electrical construction and demolition practices involved with major public works projects, specific to documentation, specification, and code requirements. * Ability to provide design/consultation in specialized areas, make decisions and solve problems. * Knowledge of construction management processes, means and methods. * Knowledge of building products, construction details and relevant rules, regulations, local and national building codes, and quality standards. * Demonstrated ability to develop and implement a QA/QC program for construction projects as well as to review, analyze, and negotiate construction cost estimates, change orders, and contractor claims. * Working knowledge of OSHA 1910. * Understanding of all facets of the construction process. * Ability to successfully manage and deliver on multiple tasks with competing priorities. * Strong verbal/written communication skills. * Current and valid driver's license and good driving record. * Advanced knowledge of standard professional software such as MS Outlook, Word, and Excel. * Expert working knowledge and experience using construction management software packages (Primavera P6, eBuilder, Microsoft Project scheduling software). * Advanced knowledge and experience managing and maintaining the Health & Safety requirements of construction sites. * Ability to walk around a construction site of varying size and topography to perform inspections and ability to stand for several hours observing and documenting critical construction activities. * Ability to work for extended periods of time in extreme temperatures including heat and cold. * Ability to wear required safety equipment at sites including hard hats, steel toed boots, reflective vest, gloves, face mask, safety harness, etc. * Ability to climb stairs, ladders and platforms to access structures for visual inspection and ability to lift objects less than 50 pounds. Salary Range: The anticipated starting pay range for this position is based on the employee's primary work location and may be more or less depending upon skills, experience, and education. These ranges may be modified in the future. Location A: $88,000 - 122,000 You can view which BC location applies to you here. If you have any questions, please speak with your Recruiter. Benefits and Other Compensation: We provide a comprehensive benefits package that promotes employee health, performance, and success which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time off and parental leave, paid holidays, 401(k) retirement savings plan with employer match, performance-based bonus eligibility, employee referral bonuses, tuition reimbursement, pet insurance and long-term care insurance. Click here to see our full list of benefits. About Brown and Caldwell Headquartered in Walnut Creek, Calif., Brown and Caldwell is a full-service environmental engineering and construction firm with 50 offices and 2,100+ professionals across North America and the Pacific. For more than 75 years, we have created leading-edge environmental solutions for municipalities, private industry, and government agencies. We strive to be the company of choice-to our clients, who benefit from our passion for delivering exceptional quality, and to our employees, present and future, who share our commitment to client service, collaboration, and innovation. Join us, and you will find a home where you can do your best work, reach new levels of expertise, and enjoy exceptional development opportunities. For more information, visit ************************ This position is subject to a pre-employment background check and a pre-employment drug test. Notice to Third Party Agencies: Brown and Caldwell does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request with Brown and Caldwell, Brown and Caldwell reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Brown and Caldwell is proud to be an EEO/AAP Employer. Brown and Caldwell encourages protected veterans, individuals with disabilities, and applicants from all backgrounds to apply. Brown and Caldwell ensures nondiscrimination in all programs and activities in accordance with Title VI of the Civil Rights Act

Job Description We're looking for a Project Design Engineer who thrives in the final stretch of product development, where details matter, timelines tighten, and great ideas become real, manufacturable products. In this role, you'll work directly with the founding team and core engineers to optimize designs for manufacturability, cost, and scalability, ensuring every product is ready for production at the highest standard. You'll take ownership of design transfer and serve as the link between engineering, prototyping, production, and suppliers. From refining CAD models to validating tooling with contract manufacturers, you'll help drive products from prototype to market-ready. If you're motivated by hands-on engineering, cross-functional collaboration, and seeing your work move quickly into production, this role offers a high-ownership environment where your impact will be visible every day. What You'll Do Finalize designs with a strong emphasis on Design for Manufacturability across injection molding, CNC machining, extrusion, and other processes. Convert prototypes and early iterations into complete, production-ready documentation-tolerances, specifications, and all. Partner with contract manufacturers to validate tooling, assess manufacturability, and align on cost and quality expectations. Support all phases of New Product Introduction, including pilot builds, validation testing, and design updates. Maintain accurate 3D CAD models and 2D drawings in SolidWorks or Fusion 360 while upholding strong drafting and GD&T standards. Troubleshoot late-stage design challenges involving materials, assembly, or production constraints. Collaborate directly with founders, supply chain, and production teams to move projects through aggressive timelines without sacrificing quality. What You Bring B.S. in Mechanical Engineering, Manufacturing Engineering, or similar field. 3-7 years of product development experience, ideally in high-performance, defense-adjacent, or ruggedized product environments. Strong understanding of injection molding, CNC machining, and extrusion, with proven success optimizing designs for these methods. Direct NPI experience, owning transitions from prototype to full production. Proficiency in SolidWorks or Fusion 360, with solid knowledge of GD&T and drafting best practices. A detail-oriented, problem-solving mindset with comfort in fast-paced, high-ownership environments. Bonus Points Experience in defense, firearms, or ruggedized consumer product development. Exposure to rapid prototyping, additive manufacturing, or bridge tooling. Background working with suppliers, including overseas vendor coordination.

Job Description Job Title: Mechanical Engineering Intern Job Type: Part Time (On-Site only) About Us: Grace Company is a leader in the quilting and sewing industry, committed to delivering innovative solutions that enhance creativity and craftsmanship. Our cutting-edge technology helps turn ideas into reality, and we foster a collaborative environment where creativity and technical excellence are valued and encouraged. "Our mission is to empower people to connect with their passions, unleash their creativity, and enrich their lives and the lives of others by providing quality experiences and innovative solutions." Position Description: Grace Company is seeking to add a part-time mechanical engineering intern to our Engineering Team. This individual will assist in the design, development, analysis, and implementation of mechanical components and systems related to sewing and quilting products. They will conduct research to solve specific design problems; develop preliminary sketches, models, layouts, and assembly drawings; and help design and test prototypes. This individual must have the ability to visualize/conceptualize an idea and be able to develop that concept into a 3-D model. They must be a detail-oriented individual with an interest in technical communication, eager to contribute to high-quality engineering products and documentation. This position is on-site only. No remote work is available. Job Duties: Assist in the design of new products and make updates to existing products. Design and test fixtures to use in quality control process. Create production documentation for new products. Develop preliminary sketches or schematics, layouts, and assembly drawings. Perform calculations for machine/product loads and system dynamics. Define acceptable product criteria for new and existing products. Create/maintain quality control documents for new and existing products. Build prototypes and test products to verify design concepts. Set up tests on machines to verify calculations, analyze long term results, and improve designs to increase product life. Required Qualifications & Skills: Education Currently enrolled in a Bachelor's degree program in Mechanical Engineering, Industrial Engineering, or a related field. Technical Skills: Certified as a SolidWorks Associate or equivalent experience preferred. Familiar with technical writing and documentation tools (e.g. Microsoft Word, Adobe Illustrator, Adobe InDesign). Soft Skills: Exceptional attention to detail and commitment to producing error-free work. Strong written and verbal communication skills to convey complex technical information clearly. Ability to work collaboratively in a team environment and incorporate feedback effectively. Experience 0 - 2 years of experience designing mechanical components. Prior experience with technical writing, creating assembly instructions, or developing user manuals preferred. Salary and benefits Salary will depend on skills and experience. Job Posted by ApplicantPro

Change the world. Love your job. In your first year with TI, you will participate in the Career Accelerator Program (CAP), which provides professional and technical training and resources to accelerate your ramp into TI, and set you up for long-term career success. Within this program, we also offer function-specific technical training and on-the-job learning opportunities that will encourage you to solve problems through a variety of hands-on, meaningful experiences from your very first day on the job. The TMG Development program is a 12-month program for new college graduates in the TMG organization. Are you looking to grow your career in manufacturing product introduction and production at one of the leading semiconductor companies in the world? TI's Manufacturing Engineers are technical leaders who get to work in the world's most advanced manufacturing facilities. We bring the company's breakthrough innovations to life by manufacturing technologies that are literally changing the world. At Texas Instruments (TI), as a Manufacturing Product Engineer, you will interface with design, process, test, reliability and manufacturing engineering to solve product issues and production problems, as well as developing process improvements to reduce production costs and increase yields. Manufacturing Product Engineers also manage new product introduction and production support engineering for a specific product or group of products after they have been transferred from design to in-house or outsourced production. Responsibilities include: Support daily production issues at test floor and wafer probe. This includes low yield analysis and disposition, and setup failure debug/analysis and resolution (both hardware and software) Provide detailed analytical study on above issues, and liaise with business units; product engineering team for improvement (test program, hardware, setup, etc.) Engage in productivity improvement projects, including yield improvement, test time reduction, test insertion removal, legacy tester conversion, etc Support new product release from development site. Perform vigorous buyoff for new test systems (program/hardware) per manufacturing requirements Lead and support introduction of new tool/equipment/test processes to manufacturing from new product releases, leading the entire qualification and change management approval within TI Electronic Marketing (TIEM) Interface with various modules, in addition to yield, product and integration teams, to resolve issues that limit yield performance. Minimum Requirements: Masters degree in Computer Engineering, Electrical & Computer Engineer, Electrical Engineering, Engineering Physics, Physics or related Cumulative 3.0/4.0 GPA or higher Experience with VLSI design and development technologies Preferred Qualifications: Knowledge of Wafer fabrication, Device Physics, Circuit Analysis and Data Analysis Strong verbal and written communication skills Demonstrated strong analytical, critical thinking, and problem solving skills Ability to work in teams and collaborate effectively with people in different functions Ability to take the initiative and drive for results Strong time management skills that enable on-time project delivery Ability to work effectively in an interrupt-driven, fast-paced and rapidly changing environment Demonstrated ability to build strong, influential relationships Problem solving skills, including meticulous attention to details Ability to communicate effectively across functional boundaries and with upper management Ability to work in stressful situations and arrive at creative and effective solutions Ability to think strategically

This Entry Level or Mid-Level Project Engineer position in the landing gear industry is with the ES3 Mechanical Systems/Wheels/Brakes Design and Analysis Group. The engineer will be responsible for performing a variety of mechanical engineering functions to include, but not limited to: Reliability/maintainability data analysis, risk assessments, new designs, redesigns, CAD modeling and drawing development, prototyping, Aircraft system level requirements analysis, test fixture development and airworthiness certification on a variety of military platforms. Much of the engineering effort is centered around incorporating new technology on military aircraft platforms. This is a multi-faceted position that requires a variety of engineering skills and offers an opportunity to be at the cutting edge of design and analysis techniques and will be surrounded with experts in their fields who consistently impact aerospace engineering projects that surpass industry norms. Applicant must be a good problem solver, be self-motivated and work well in a team-oriented environment. ES3 professional staff are the talent that makes ES3 successful. You will be one within the highly valued rank of professional staff. You will have access to state-of-the art equipment, modern work facilities, and flexible schedules. This Engineering position is planned for our Layton, Utah engineering office. This facility boasts private offices, more than 75 engineers, scientists, and technicians, along with proximity to our 240,000 square foot aerospace R&D laboratory, prototyping, testing, and production center. ES3 also has facilities in downtown San Diego, California; Warner Robins, Georgia; Midwest City, Oklahoma and Abilene, Texas. All our facilities have people steeped in a corporate culture that promotes a friendly and enjoyable workplace. Knowledge, Skills, and Abilities Required/Preferred: 3D CAD Modeling and Drawing Experience (SolidWorks preferred) Reliability/Maintainability and Repair Data Analysis Conduct Trade Studies Requirements Analysis Determine Interface Requirements, Find Replacement Components, Design Modifications to Enable New Components to Interface with Existing Systems Test Fixture Design Problem Solving Skills Adept Report and Technical Writing Must Be Able to Work Independently, Multitask and Prioritize Excellent Verbal and Written Communication Skills and Excel in a Team Environment Proficient in Microsoft Office Suite Education & Experience Required: Minimum of B.S in Mechanical Engineering 0-10 Years' Experience in Aerospace/Mechanical Design/Analysis or Related Field CAD Modeling Other Requirements: Candidate must be a U.S. Citizen As a condition of employment, candidates will be required to participate in a background investigation and be able to obtain a U.S. Government Security Clearance Ability to travel as required (less than 20%) Key Competencies: Excellent verbal and written communication skills An aptitude to learn new technology Positive, pleasant and professional attitude with all levels of staff, customers and government representatives Initiative and pro-active, flexible and open to changing priorities Strong work ethic, high integrity and high motivation for excellence Dependability and reliability Compensation and Benefits: ES3 can offer an environment that is enriching, rewarding and competitive in total compensation. Our total compensation is inclusive of the exceptional benefits program ES3 offers to all benefit eligible staff members. These include: Medical Insurance Dental Insurance Vision Insurance Life Insurance Disability Insurance Flexible Spending Account and Health Reimbursement Account Health Savings Account Competitive Paid-Time-Off accrual Holiday Pay A generous matching 401K plan with up to 6% match and up to 2% profit sharing. From our experience, staff members who participate in our company 401(k) plan are more engaged in our company than staff who do not. Thus, we try to partner with individuals who reinforce our company culture. Please visit our website at ************** to learn more about us. ES3 Overview ES3 takes great care to ensure we maintain just corporate policies, effective personnel management, and aggressive compensation packages. As a result, ES3 has a proven track record of successful recruitment and stellar retention of professional staff. ES3 has a purposeful business mission-to improve the performance, maintenance, and supply of mission-critical and safety-of-flight aerospace systems while reducing the hazardous exposures of aviation maintenance crews and reducing the environmental impact of aerospace operations and production processes. At ES3 you can feel good that your daily work activities support the broader objectives of improving aviation performance / safety, reducing the environmental impact of aviation, and improving the safety and work conditions for aviation workers. ES3 has a strong corporate culture of camaraderie, excellence, and effectiveness that truly stands out in today's aerospace industry. Each of ES3's locations work hard to maintain a secure, healthy, family-friendly, positive, and cooperative work environment. Joining ES3 will be like joining a family that will make sure you are happy with your work, your office environment, and your fellow co-workers. You can take pride in your work, enjoy engaging with your co-workers, and thrive in your field of expertise. Once you join ES3, you'll want to make it your forever employer.

Chemical Engineer About the Job Thatcher Company is seeking a Chemical Engineer to join our engineering team in Salt Lake City, Utah. In this role, you will provide process engineering and technical support to plant operations, capital projects, and other teams. You will work closely with operations and the business team to identify process improvement opportunities, implement plant improvement projects, and drive innovative solutions. What You Will Do * Promote understanding and application of safety practices. * Optimize plant production and efficiency by the implementation of improvement opportunities and management of process constraints. * Work with operations and manufacturing experts to resolve technical issues. * Develop and maintain process documentation and safety information such as P&IDs, material balances, equipment datasheets, process line sizing calculations, hydraulic calculations, and datasheets for instruments and relief devices. * Contribute to process safety and environmental performance through participation in process hazards analysis (PHA), management of changes (MOC), and incident investigation. * Manage small capital projects from design through startup.

Do you have a passion for leveraging data, analytics, and AI to drive meaningful change? At GE Aerospace, we are transforming supply chain processes to address one of our most critical business challenges: delivery. As a Staff Enterprise Application Engineer specializing in Palantir, you will utilize your expertise in Palantir Foundry and AWS cloud technologies to design, deploy, and tailor solutions for complex aerospace challenges. In this role, you will build and maintain Foundry pipelines, modular applications, and workflows, while working closely with stakeholders to create cutting-edge solutions using ontology, advanced analytics, and AI. **** **Roles and Responsibilities** + Architect and design sound/supportable technical solutions to complex business requirements + Develop and maintain Foundry pipelines using Pipeline Builder to ingest, transform, and integrate data. + Build modular applications and workflows leveraging Python, and Foundry AIP. + Collaborate with data engineers, analysts, and stakeholders to refine data models and ontology mapping. + Assist in Foundry workshops to guide stakeholders through platform capabilities. + Support testing, debugging, and performance tuning of Foundry applications. + Work with aerospace data to identify patterns, trends, and insights using Palantir Foundry and AWS analytical tools. + Develop custom applications and workflows within Foundry and AWS to address specific challenges. + Ensure data integrity and compliance with aerospace industry standards. + Apply lean methodologies to identify opportunities for process improvement. + Share feedback with Palantir and AWS product teams to enhance tools and workflows. + Provide technical coaching and direction to more junior teammates. **Technical Qualifications** + Strong experience in Python, PySpark, and front-end frameworks like React, Angular, or Vue.js. + Experience with Pipeline Builder, AIP, and Foundry's application development ecosystem. + Proficiency in AWS cloud services such as EC2, S3, Lambda, RDS, and CloudFormation. + Experience with Git-based code repositories and CI/CD workflows. **Minimum Qualifications** + Bachelor's degree from accredited university or college with minimum of 4 years of professional experience OR associate's degree with minimum of 7 years of professional experience OR High School Diploma with minimum of 9 years of professional experience + Minimum 3 years of professional experience in Computer Science or "STEM" Majors (Science, Technology, Engineering and Math) + **Note:** Military experience is equivalent to professional experience The base pay range for this position is $110,700- $184,600. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on October 31, 2025. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs ( _i.e_ ., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. **Eligibility Requirement:** + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job. **Desired Characteristics** + Ability to operate in an ambiguous environment as we establish this transformation program and define roles & responsibilities. + Demonstrated ability to quickly understand new concepts and analyze system deficiencies + Passionate about security and the quality of the applications they support + Organized, thorough, and detail oriented + Collaborates well with others to solve problems and actively incorporates input from various sources + Eager to learn, shares ideas, encourages and accepts feedback well + Strong analytical skills - strong problem-solving skills, communicates in a clear and succinct manner and effectively evaluates information / data to make decisions; anticipates obstacles and develops plans to resolve + Demonstrated customer focus - evaluates decisions through the eyes of the customer; builds strong customer relationships and creates processes from the customer's viewpoint + Experience working with an offshore development team + High level of energy and enthusiasm, with the ability to thrive in a dynamic, fast-paced setting + Comfortable with empowering colleagues and inspiring others to be their best **Note:** To comply with US immigration and other legal requirements, it is necessary to specify the minimum number of years' experience required for any role based within the USA. For roles outside of the USA, to ensure compliance with applicable legislation, the JDs should focus on the substantive level of experience required for the role and a minimum number of years should NOT be used. This Job Description is intended to provide a high-level guide to the role. However, it is not intended to amend or otherwise restrict/expand the duties required from each individual employee as set out in their respective employment contract and/or as otherwise agreed between an employee and their manager. **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job Description Ability to work well with others in a team setting. Ability to conduct complex statistical, geometric, and mathematical calculations. Ability to conduct responsibilities substantially free from routine supervision. Ability to read, understand, create engineering drawings on common engineering software. Ability to work efficiently on common personal computer hardware and software. Proficient in Microsoft Office applications Demonstrate a primary commitment to patient safety, product quality and compliance with the , Quality Manual and its governing regulations. Document and improve manufacturing processes and operations that control the safety and efficacy of finished devices. Conduct qualification, verification, and validation activities for the production of medical devices Analyze, troubleshoot and resolve issues relating to the safety, efficacy, quality, cost, or delivery of components and finished devices. Complete engineering work and contribute to new product development teams and product support, typically including the following activities: technology development, test of materials or products, preparation of specifications, Six Sigma, process study, process improvements, and report preparation. Develop manufacturing equipment in compliance with manufacturing safety (e.g., OSHA & EPA) principles. Design, procure, and fabricate tooling and fixtures. Participate in design control efforts related to risk analysis (FMEA) & design reviews. Preferred: Source component and service suppliers; assess supplier capability and effectiveness. Train, develop, and/or provide work direction to operators and technicians. Participate in the identification, implementation, and management of production goals. Participate on cross-functional project teams. Coordinate, manage, and document project work and progress, and recommend appropriate revisions. Design and coordinate engineering tests and experiments. Analyze data, draw conclusions, and summarize test results. Communicate results to manager. Interfaces with product builders or extrusion technicians, production supervisors, and engineers in troubleshooting problems on the production floor. Participates in project teams typically including one of the following: Identifying and implementing process/product improvement alternatives to increase/optimize yield, efficiency, throughput, and/or performance. Designing, performing, and documenting engineering test experiments to evaluate product/process performance. Designing, developing, testing, and validating equipment and processes; analyzing and interpreting process models and recommending process improvements. Evaluating external process technologies. Coordinates with the appropriate suppliers and other external resources needed in developing and implementing process/product improvement plans. Participates in project planning and scheduling. Attends and contributes to production core team meetings.

U.S. Citizenship is Required. Ability to qualify for a US Department of Defense Top Secret security clearance required. Candidate must be SAP and SCI program eligible. Full-time opportunity in Clearfield, Utah with relocation allowance. This position is in-person. The Project Engineer on the Aerospace Hardware Team will lead and manage the planning, execution, and oversight of projects focused on the design, integration, and testing of advanced electromechanical systems for flight test experiments. This role involves creating detailed project plans, tracking progress, and reporting status, risks, and achievements to stakeholders. The Project Engineer will coordinate efforts across cross-functional teams to resolve technical challenges and ensure successful project delivery within schedule and budget constraints. The ideal candidate will have 5 or more years of engineering experience and a proven track record of developing solutions and collaborating across engineering teams to deliver high performing and reliable systems. Responsibilities: Lead system engineering efforts through requirements analysis, design, integration, testing, and validation Develop and maintain system architecture, interface specifications, and technical documentation Collaborate with cross-functional teams (hardware, software, test, and operations) to ensure system functionality and performance Support risk management, trade studies, and system performance evaluations Provide technical input on proposals, project plans, and schedules Ensure compliance with industry standards, customer requirements, and organizational processes Support troubleshooting, root cause analysis, and corrective actions for system-level issues Requirements Bachelor's or advanced degree in Electrical Engineering, Mechanical Engineering, Physics, or a related technical field 5+ years of experience in engineering, integration, and testing Strong understanding of engineering development processes (requirements development, review life cycle, verification & validation) Familiarity with testing standards (INCOSE SE Handbook, MIL-STD, and ISO standards) Excellent analytical, problem-solving, and communication skills Previous experience with DOD programs and unmanned aircraft systems is highly desirable Must be customer-focused, detail-oriented, and capable of working with multiple teams to resolve technical problems Ability to work independently and collaboratively in a team environment Ability to obtain and maintain a DoD security clearance is required WE OFFER AN EXCEPTIONAL EMPLOYEE BENEFITS PACKAGE! Competitive Industry Pay 100% Employer-Paid Medical Insurance Premium HSA with Employer Contributions Dental and Vision Coverage Options Paid Holidays Paid Vacation and Sick leave Company Funded 401(k) and Profit Sharing Plans Employee Stock Ownership Plan (ESOP) Life and Disability Insurance Paid Parental Leave Discretionary Bonus Eligibility The annual pay range for the Electrical Engineer position is $125,000 to $190,000. The posted pay range values provide the candidate with guidance on annual base compensation for the position, at a full time level of effort, exclusive of overtime, bonus, and benefits-related compensation, over a range of qualifications that may fit hiring objectives. Toyon Research Corporation will consider the individual candidate's education, work experience, applicable knowledge, skills and training, among other factors, when preparing an offer of employment. Pay Transparency Nondiscrimination Provision Equal Opportunity Employer including Disability and Veterans Applicant Privacy Notice Learn more about our company in our latest video, We are Toyon. The application window for this posting will remain open until the position is filled. Ref #2621-H

Job Description A CNC Machine Tool Application Engineer contributes to the success of Hartwig by working hand-in-hand with our Sales team to provide support and be a technical resource to ensure customer satisfaction. The customers we serve are in a variety of industries and rely on the Hartwig team to provide the best manufacturing solutions and support the machine tool industry. This full-time position is based in the Salt Lake City, UT area. The main responsibilities include: Evaluating manufacturing processes and recommending industry-leading solutions Developing and testing alternative processing methods Performing time studies for process improvement recommendations Overseeing machine installations Conducting research and assisting in presenting proposals to customers Performing on-site programming and machine operation training for customers Facilitating customer demonstrations by setting up and programming machine tools Required Skills Individuals who ideally fit this role should meet the following qualifications: Two-year degree in manufacturing engineering - preferred Experience in machining process development, project management and CNC programming preferred Okuma machine programming experience - preferred Ability to demonstrate knowledge and application of machine tool products, options and functions Strong mechanical and technical aptitude Excellent interpersonal skills, such as collaboration, listening, respect and work ethic, which lead to lasting and trusting relationships with team members and customers Ability to work collaboratively with sales team to provide customer solutions The Organization, The Team and Our Benefits Hartwig's team of over 200 professionals throughout the U.S. is dedicated to helping manufacturers control and power the growth of their business. To achieve this, team members are given the tools and training for success. In addition to a comprehensive first year training program and on-going professional development, Hartwig provides a full benefit package including health, dental, vision, life and disability insurances. Compensation is also a key element in your decision to join the Hartwig team. Our 401k program has a match and team members are bonus eligible. As an Applications Engineer at Hartwig, you will also be provided with a laptop and cellphone. With over 60 team members who have been with us 10 years or longer and over 12,000 installations since our founding in 1960, Hartwig has gained a reputation for superior service, integrity and support. We would be honored to have you consider joining our team. Hartwig, Inc., including all operating subsidiaries, is an Equal Opportunity Employer - M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability, protected veteran status, sexual orientation, gender identity, or any other protected class.

Job Description B.H. Inc., is looking to hire a full-time Project Engineer to support project managers on civil and excavation construction projects. This position requires a willingness to travel and a construction management degree or equivalent industry experience. Candidate must be proficient with excel, blue beam, primavera and word. Are you a recent college graduate or a seasoned project engineer looking to take your career to the next level with a company with an outstanding company culture and team atmosphere? If so, keep reading! The Project Engineer earns between $70,000-80,000 yearly (DOE) based on experience and is paid weekly. Qualified applicants may be eligible to earn per diem. We offer great benefits, including health, vision, dental, life insurance, a 401k plan with match, and paid time off (PTO). If this sounds like the opportunity you've been looking for, apply to be our Project Engineer today! ABOUT B.H. INC. Brad Haslem started BHI with just six other people in 1998. What began as an electrical company that operated out of a one-bay shop is now a powerhouse of a general contractor, focusing not only on instrumentation and electrical but also on civil & excavation, facilities & pipeline, construction management, and wireless & communications. With projects and offices located across the United States, BHI is a name that is recognized and respected in the industries we serve. We are a group of highly motivated, aggressive, goal-oriented individuals who love working as a team and growing our organization. We look at each other as family, not merely co-workers who punch the same clock. We firmly believe that our core responsibility is to develop people and provide for families. Here at BHI, we have a positive work environment and offer great pay and generous benefits. QUALIFICATIONS Construction management degree or experience as a project engineer. Civil and excavation construction experience. Proficient in excel, blue beam, primavera and word. Experience in vista and bid 2 win a plus. Ability to travel as required. ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this job as a project engineer, please fill out our initial 3-minute, mobile-friendly application so that we can review your information. We look forward to meeting you! Applicants must be authorized to work for any employer in the United States. We are unable to sponsor or take over sponsorship of an employment Visa at this time. EEO, including disability and vets. #INDSJ2 Job Posted by ApplicantPro

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Responsibilities: As a Mechanical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team. You will also gain knowledge of various aspects of a refinery by working with a team of professionals who run a specific portion of the refining process. Most often, Mechanical Engineers will have an opportunity to work on more than one area of the refinery, leading to a broad understanding of how the plant operates. Finally, you will have the opportunity to expand your written and verbal presentation skills in a professional work environment. The majority of Mechanical Engineering co-ops and interns enter into the following positions: Area Refining Engineer/Project Engineers develop and use project management skills to create project scopes, estimates, and schedules. Once a project is developed and approved, you, as the project manager, will oversee the design effort and assist in the construction process. MPC will provide training and educational opportunities to help you develop your knowledge of other engineering disciplines. We are committed to developing engineers into professional project managers who can successfully manage projects of all sizes. Reliability Engineers support the refinery's Maintenance Department through design and development of equipment related improvements. Such improvements include root cause failure analysis, optimization of maintenance programs in rotating equipment (pumps, compressors, etc.), and troubleshooting fixed equipment (refinery pressure vessels, heat exchangers, piping systems, etc.). Reliability Engineers will also be continuously challenged to find new technology in design, materials and repair methods to achieve refinery goals of longer running times at lower costs. Qualifications: + Candidates must be majoring in Mechanical Engineering + Strong academic performance + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Positions are available spring, summer, and fall semesters + Availability for multiple work terms is preferred + A valid driver's license is required + Concurrent enrollment in a degree seeking program + Military experience a plus + MIN - $32.31 per hour / MAX - $40.89 per hour Learn more about Marathon Petroleum's benefits at ********************* As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00018186 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Anacortes, Washington, Canton, Ohio, Catlettsburg, Kentucky, Detroit, Michigan, El Paso, Texas, Garyville, Louisiana, Kenai, Alaska, Mandan, North Dakota, Martinez CA Refinery, Robinson, Illinois, Salt Lake City, Utah, St Paul Park, Minnesota, Texas City, Texas, Wilmington, California Education: High School (Required) Employee Group: Full time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.

Staff Manufacturing Engineer At Ortho Development, we help people do what they love by restoring mobility through innovative orthopedic hip and knee solutions. From our headquarters in Draper, Utah, we're proud to provide meaningful work with a strong, collaborative culture where every team member can make a difference. Here, you'll find teammates who care, leadership that listens, and opportunities to learn, grow, and succeed. We offer competitive benefits, a workplace environment designed to help you thrive and promote work-life balance. As a Staff Manufacturing Engineer, you will take ownership of managing and improving manufacturing processes to support operational strategic goals. You will continuously drive to keep assigned manufacturing processes as current and efficient as possible, especially regarding process equipment, systems, and workflow. Additionally, you will Collaborate with suppliers on orthopedic devices to ensure a quality product is delivered, while working collaboratively with design, quality, regulatory, supply chain, etc. This full-time onsite position is available to start immediately and is a great opportunity in the exciting medical device industry. Location: Onsite - Draper, UT Schedule: Monday- Friday Your responsibilities: Responsible for manufacturing processes for orthopedic devices, including procedures, instructions, process validation, supplier qualifications, and monitoring to ensure product consistency and compliance with QMS and standards Modeling skills with experience in solid modeling packages such as CREO, Windchill, SolidWorks, etc. Validation experience i.e., IQ, OQ, PQ requirements Capital equipment purchases utilizing URS, FAT, SAT Identify and implement process improvements to enhance efficiency, reduce costs, and minimize waste Collaborate with R&D for product design, ensuring new devices are designed for manufacturing Ensure manufacturing processes meet applicable FDA, ISO, and other industry standards Partner with Quality to develop and maintain manufacturing quality control processes Coordinate with suppliers for product/material quality and ensure timely deliveries Provide guidance and mentorship to junior manufacturing engineers and production staff, fostering a culture of continuous improvement Lead extensive CapEx projects up to and including facility upgrades and re-location Address non-conformances and CAPAs as needed Perform other job-related duties as assigned Requirements: Bachelor of Science degree in engineering or related field 10+ years experience in Manufacturing Engineering or similar Strong interpersonal skills required in the areas of verbal and written communications, customer focus and professionalism, self-starter Strong listening, questioning, problem-solving and assessment skills Proficient in the use of MS Excel, including pivot tables, vlookups, graphs and macro's is required (Preferred) CAD CAM experience with Creo (Preferred) Knowledge of statistical analysis with MiniTab or other statistical software (Preferred) Training in Lean Six Sigma, Project Management, AutoCAD, GD&T (Preferred) Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Employee discounts Flexible spending account Health insurance Life insurance Paid Holidays Paid time off Parental leave Tuition reimbursement Vision insurance Wellness incentives UTA Transit Pass

Job Description This Entry Level or Mid-Level Project Engineer position in the landing gear industry is with the ES3 Mechanical Systems/Wheels/Brakes Design and Analysis Group. The engineer will be responsible for performing a variety of mechanical engineering functions to include, but not limited to: Reliability/maintainability data analysis, risk assessments, new designs, redesigns, CAD modeling and drawing development, prototyping, Aircraft system level requirements analysis, test fixture development and airworthiness certification on a variety of military platforms. Much of the engineering effort is centered around incorporating new technology on military aircraft platforms. This is a multi-faceted position that requires a variety of engineering skills and offers an opportunity to be at the cutting edge of design and analysis techniques and will be surrounded with experts in their fields who consistently impact aerospace engineering projects that surpass industry norms. Applicant must be a good problem solver, be self-motivated and work well in a team-oriented environment. ES3 professional staff are the talent that makes ES3 successful. You will be one within the highly valued rank of professional staff. You will have access to state-of-the art equipment, modern work facilities, and flexible schedules. This Engineering position is planned for our Layton, Utah engineering office. This facility boasts private offices, more than 75 engineers, scientists, and technicians, along with proximity to our 240,000 square foot aerospace R&D laboratory, prototyping, testing, and production center. ES3 also has facilities in downtown San Diego, California; Warner Robins, Georgia; Midwest City, Oklahoma and Abilene, Texas. All our facilities have people steeped in a corporate culture that promotes a friendly and enjoyable workplace. Knowledge, Skills, and Abilities Required/Preferred: 3D CAD Modeling and Drawing Experience (SolidWorks preferred) Reliability/Maintainability and Repair Data Analysis Conduct Trade Studies Requirements Analysis Determine Interface Requirements, Find Replacement Components, Design Modifications to Enable New Components to Interface with Existing Systems Test Fixture Design Problem Solving Skills Adept Report and Technical Writing Must Be Able to Work Independently, Multitask and Prioritize Excellent Verbal and Written Communication Skills and Excel in a Team Environment Proficient in Microsoft Office Suite Education & Experience Required: Minimum of B.S in Mechanical Engineering 0-10 Years' Experience in Aerospace/Mechanical Design/Analysis or Related Field CAD Modeling Other Requirements: Candidate must be a U.S. Citizen As a condition of employment, candidates will be required to participate in a background investigation and be able to obtain a U.S. Government Security Clearance Ability to travel as required (less than 20%) Key Competencies: Excellent verbal and written communication skills An aptitude to learn new technology Positive, pleasant and professional attitude with all levels of staff, customers and government representatives Initiative and pro-active, flexible and open to changing priorities Strong work ethic, high integrity and high motivation for excellence Dependability and reliability Compensation and Benefits: ES3 can offer an environment that is enriching, rewarding and competitive in total compensation. Our total compensation is inclusive of the exceptional benefits program ES3 offers to all benefit eligible staff members. These include: Medical Insurance Dental Insurance Vision Insurance Life Insurance Disability Insurance Flexible Spending Account and Health Reimbursement Account Health Savings Account Competitive Paid-Time-Off accrual Holiday Pay A generous matching 401K plan with up to 6% match and up to 2% profit sharing. From our experience, staff members who participate in our company 401(k) plan are more engaged in our company than staff who do not. Thus, we try to partner with individuals who reinforce our company culture. Please visit our website at ************** to learn more about us. ES3 Overview ES3 takes great care to ensure we maintain just corporate policies, effective personnel management, and aggressive compensation packages. As a result, ES3 has a proven track record of successful recruitment and stellar retention of professional staff. ES3 has a purposeful business mission-to improve the performance, maintenance, and supply of mission-critical and safety-of-flight aerospace systems while reducing the hazardous exposures of aviation maintenance crews and reducing the environmental impact of aerospace operations and production processes. At ES3 you can feel good that your daily work activities support the broader objectives of improving aviation performance / safety, reducing the environmental impact of aviation, and improving the safety and work conditions for aviation workers. ES3 has a strong corporate culture of camaraderie, excellence, and effectiveness that truly stands out in today's aerospace industry. Each of ES3's locations work hard to maintain a secure, healthy, family-friendly, positive, and cooperative work environment. Joining ES3 will be like joining a family that will make sure you are happy with your work, your office environment, and your fellow co-workers. You can take pride in your work, enjoy engaging with your co-workers, and thrive in your field of expertise. Once you join ES3, you'll want to make it your forever employer.