Design engineer jobs in Manchester, CT

Haugland Group, a privately-owned civil infrastructure and energy construction company has an immediate opportunity for a Civil Project Engineer in our Massachusetts territory. We are looking for an experienced, self-motivated, highly organized individual to join the Project Management team to provide all facets of construction project support, including submittal processing, material management, and budget analysis. At Haugland, we understand that pushing the boundaries of what has been done is essential to develop the infrastructure of tomorrow. The journey won't be simple, but what gets us there is. At Haugland Group, Our Word is Our Way. We are leaders in building what's next because we see the path to get there and we're setting a new standard of exceptional along the way. Let's build together! Key Functions Initiate, prepare, review, develop, track, and distribute submittals and RFIs through Procore. Track file documentation (e.g., correspondence, reports, etc.) in Procore daily to follow-up on and/or summarize project issues, agreements, communications with owners and subcontractors, etc. Reconcile paperwork with the Owner's Field Rep to ensure accurate and proper completion of timesheets. Engage the work crews in conversation on both the technical and safety aspects of the job. Confirm installation is in accordance with specification and/or manufacturers' recommendation. Conduct daily log entries. Ensure progress photos are taken, cut sheets, field drawing marked up, T&E sheets verified/signed (if any), and constructed field measurements are completed daily. Interface with Cost Engineer to track invoices and receipts for field purchase orders and maintain field purchase order files and documentation. Coordinate fabrication and delivery of materials with project CPM, Project Manager, and Superintendent. Interface with Cost Engineer to code and approve PO invoices, coordinating with Accounts Payable and Project Support team. Review and submit quantities to owner for approval. Assist the Project Manager in budget analysis and cost projections. Assist in management of all subcontractors. Gather and submit closeout documentation. Assist Project Manager with projections and costs to complete. Desired Qualifications 3+ years of relevant experience, preferably Civil Engineering. Bachelor's degree in civil engineering preferred. Proficient in the use of Microsoft Office and standard computer applications. Display a high level of initiative, effort, and commitment towards completing assignments in a timely manner. Ability to identify problems; determine accuracy and relevance of information; use sound judgment to generate and evaluate alternatives and make recommendations. Effective communication skills, interpersonal and organizational skills, and a strong work ethic. Why Haugland? Compensation range for this role is 100k-145k. At Haugland Group, our benefits are designed to convey company culture and values which has employees at its forefront. Excellent benefits package including medical, prescription drug, dental, vision, Health Savings, short/long term disability, and life insurance 401k with 5% employer match Employer funded Dependent Care FSA Potential for annual performance-based raise Paid Time off Paid company observed holidays Educational and professional advancement opportunities Frequent company-sponsored events Relaxed, friendly office Fast-paced, exciting environment Haugland Group LLC and its operating divisions, affiliates, related entities, and subsidiaries (collectively, “the Company”) do not accept unsolicited resumes from search firms or employment agencies. Unsolicited referrals and resumes are considered property of the Company and therefore, the Company will not pay a fee for any placement resulting from the receipt of an unsolicited referral. Only upon the Company's written request may preferred vendors may be invited to refer talent for specific open positions. In these cases, a fully executed agreement with the Company must be in place and current. We are an Equal Opportunity Employer. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to minimal penalties and civil liability.

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: NoneTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman's Space Sector is seeking a Product Engineer - Level 3 to join our team in East Hartford, CT. This position is 100% onsite and cannot accommodate telecommute work. AOA Xinetics (AOX), a wholly-owned Northrop Grumman Space Systems Business Unit, is a leading supplier of complex electro-optic and photonic systems and subsystems that control and manipulate light waves for a variety of applications. Reporting to the Manufacturing Engineering Manager, the Principal Product Engineer will perform Manufacturing Engineering support to Special programs production. This includes sustaining engineering and new product transition from design engineering to the production group. This position will work a 9/80 schedule, with every other Friday off. In this job, you will: Responsible for production support engineering with respect to testing methods, procedures, problem solving, electro-optic assembly specification, yield issues, minor redesign of assemblies, analysis of customer returns, and optimizing device production relative to cost constraints. This individual assumes responsibility for design transfer from engineering to production and is usually responsible for supporting manufacturing operations. Be a self-starter and able to prioritize multiple tasks in a fast paced, highly technical work environment. Be comfortable working as part of an integrated team including technicians, engineers, program managers, and research scientists. Occasional domestic travel up to 10% of the time. Other duties as assigned Basic Qualifications: Bachelor's degree with 5 years of professional experience - OR - Master's degree with 3 years of professional experience - OR - PhD with 1 year of professional experience. Will consider an additional 4+ years of experience in lieu of degree. Must have the ability to obtain and maintain a U.S. Government DoD Top-Secret security clearance. Experience with opto-mechanical alignment, assembly, bonding, and testing of precision fiber optic, micro-optic, and small mechanical components. Experience with cable harness assembly and Electronics/PCBs. Detail oriented with the desire to constantly improve the production environment, processes, and documentation. Experience creating production documentation and writing engineering change orders. Comfortable reviewing mechanical drawing schematics and checking Geometric Dimensioning and Tolerancing. Advanced Microsoft Office skills (Excel, Powerpoint, Word). Preferred Qualifications: Master's Degree and at least 4 plus years' experience in Mechanical or Optical Engineering. Experience in a manufacturing environment. Experience in an engineering development environment. Experienced CAD user (Solidworks preferred). Experienced MRP system user (SAP or Costpoint preferred). Active Top Secret SCI Clearance. Curious about all the exciting developments with the Northrop Grumman Space Sector? Click the link below: ************************************* Working at Northrop Grumman is more than just a paycheck. We offer a comprehensive Total Rewards and benefits package designed to help you thrive at work and in life. For more information on our Total Rewards package, please visit our Total Rewards site. Northrop Grumman Total Rewards Primary Level Salary Range: $103,600.00 - $155,400.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Job Description Zulu Pods is building America's next-generation component and sub-system company, and we are seeking highly motivated team players to join us in this mission. We believe in bringing your human to work and embrace out of the box thinking and creativity. We also believe in excellence and competence, with an engineering team boasting extensive turbomachinery mechanical design expertise and holding a combined experience of more than 150 years. At Zulu Pods, we operate with Integrity, take Extreme Ownership, lift each other up with Servant Leadership, win by Exceeding Expectations, and succeed with Optimistic Vision. If these values describe you, please continue: Zulu Pods is seeking an experienced mechanical design engineer in our Northampton, Massachusetts location. The selected individual will continue developing our patented ZPod technology as well as explore potential new markets by designing, prototyping, and testing new products. The experienced design engineer will help to innovate in the space of fluid mechanics, electromechanical devices, and help to solve complex engineering problems. The individual will lead product development of critical importance to the organization, while working with and helping to grow younger engineers. This individual must be capable of thinking critically and operating independently. An ideal candidate is experienced or at least interested in all aspects of engineering. A broad understanding of aerospace applications is greatly beneficial as products progress towards representative testing on turbojet engines, drivetrain, and ultimately implementation on-wing. Lastly, working at a start-up is dynamic and may take on many other shapes. This also means that there will be opportunities to develop this role to suit your skills and interests, even outside of engineering. Responsibilities: As a Principal Mechanical Design Engineer, you will be a key contributor to the Zulu Pods development lifecycle, from concept generation to field deployment. Your primary responsibilities will include: Design and Analysis: Lead the design, analysis, and validation of complex fluidic components and systems (e.g., propulsion systems, thermal management, fuel systems) for various aerospace applications. System Integration: Oversee the integration of fluidic and mechanical subsystems into larger aerospace platforms, ensuring performance, safety, and reliability requirements are met. Modeling and Simulation: Develop and apply advanced computational fluid dynamics (CFD) models and other analytical tools to predict, optimize, and troubleshoot system behavior. Testing and Validation: Plan, execute, and analyze results from ground and flight tests to validate system performance against design specifications, iterating as necessary. Requirements Management: Translate high-level mission and system requirements into detailed fluidic and mechanical component specifications. Problem Solving: Rapidly diagnose and resolve complex technical issues related to fluid mechanics, system performance anomalies, and hardware failures. Documentation: Generate and maintain detailed engineering documentation, including requirements specifications, design documents, test reports, and manufacturing procedures, adhering to industry standards. Collaboration: Work with cross-functional teams (engineers, designers, operations, and program management) to successfully execute projects on time and within design scope. Technical Leadership: Demonstrated ability to act as the System Architect or Lead Responsible Engineer (LRE) for a major subsystem. Ability to mentor junior engineers and effectively present complex technical data and trade studies to internal stakeholders and external customers. Requirements Required Qualifications: Education: Bachelor's or Master's Degree in Mechanical Engineering, Aerospace Engineering, or a closely related field. Experience: Minimum of 9 years of professional experience in fluidics, mechanical packaging, and mechanical system technologies. Technical Expertise Requirements: System Design & Analysis: Proven history of leading the design, analysis, and validation of complex aerospace fluidic subsystems. This includes propulsion components (valves, injectors, turbo-machinery interfaces), high-pressure hydraulics/pneumatics, or advanced thermal management loops (single-phase/two-phase). Advanced Fluid Dynamics & CFD: Expert-level proficiency in compressible and incompressible fluid dynamics, heat transfer, and thermodynamics. Extensive, applied experience developing, executing, and interpreting results from complex Computational Fluid Dynamics (CFD) simulations, including turbulence modeling, transient flows, and fluid-structure interaction (FSI). Modeling & Simulation: Exceptional skill in using analytical and system-level modeling tools to develop dynamic models of fluidic and mechanical systems for performance prediction, control loop design, and fault analysis. Testing and Validation: Expertise in defining, instrumenting, and executing rigorous component and system-level tests. Advanced skill in data acquisition and post-processing to correlate test results with analytical models and validate performance margins. Robust Mechanical Design: Deep understanding of mechanical design principles, including stress analysis (FEA), fatigue life, material selection for extreme environments, and design for manufacturability (DFM) and assembly (DFA). Complex Component Packaging: Extensive experience in the 3D packaging and routing of intricate fluidic and mechanical systems within strict, confined aerospace envelopes. Hardware Ownership: Demonstrated ability to drive a component or system from concept/PDR through CDR, prototyping, full-scale production, and successful flight/mission operation. Tools: Expert-level proficiency with professional CAD software (e.g., SolidWorks, CATIA, NX) for part/assembly modeling, drawing creation (GD&T per ASME Y14.5), and configuration management. Expertise with FEA (e.g. ANSYS) and system-level modeling tools (e.g., MATLAB/Simulink). Preferred Qualifications: Rocket Propulsion Experience: Direct, hands-on experience in the design, development, or testing of liquid rocket engines (LREs), including high-performance components like injectors, turbopumps, and high-pressure valves. Experience with in-space propulsion or hypersonic fluid dynamics is highly valued. Complex Control Systems: Experience designing or integrating fluidic systems that incorporate closed-loop control mechanisms, including familiarity with Proportional-Integral-Derivative (PID) tuning and system stability analysis. Materials Science for Extreme Environments: In-depth familiarity with advanced materials suitable for extreme aerospace conditions, such as superalloys, composites, or refractory metals, especially regarding their interaction with propellants and high-temperature gases. Additive Manufacturing (AM): Practical experience designing aerospace hardware for additive manufacturing (3D printing), including knowledge of process limitations, post-processing requirements, and qualification/testing of AM parts. Industry Certifications/Experience: Experience working within AS9100 or other strict aerospace quality management systems. Additional Requirements: Excellent problem-solving skills and attention to detail. Strong communication and teamwork abilities. Ability to learn quickly and adapt to new technologies. 0-25% Travel as required by job responsibilities. US Citizenship or Permanent Residency (due to the nature of defense-related work). Benefits Salary/Equity: Competitive salary and equity options. Comprehensive Health Insurance: Standard offerings include medical, dental, and vision insurance. Disability Insurance: Company-paid basic Short-Term Disability (STD) and Long-Term Disability (LTD) insurance to ensure financial security. Generous Paid Time Off (PTO): Competitive policies for vacation, sick, and personal days. Paid Parental Leave: Substantial time off for new parents. Career Acceleration: Join early in our growth journey to position yourself for future leadership opportunities as we expand; your impact today helps shape the company and opens doors to senior roles tomorrow. Influence and Autonomy: Senior engineers are often granted a high degree of technical autonomy and direct influence over core product decisions and architecture. Office Amenities: Stocked kitchens with unlimited snacks and gourmet coffee, team game nights, and team-building events. Personal Fulfillment: A stimulating, high-impact environment where your work directly contributes to national security and technological advancement. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

The Visual Storytelling division of ESPN Creative Studio is a team of creative directors, art directors, animators, concept artists, visual journalists, photo editors, web developers, graphic designers and strategy producers whose work reaches every ESPN platform: We lead the creative direction and execution of on-air brand identities for ESPN's live events and studio shows. We are responsible for the creative content on ESPN.com and the ESPN app, including photography, illustration, and interactive storytelling. We create and produce a wide range of work for ESPN's direct-to-consumer business and across our digital products. We manage the design voice of our ESPN brand, from holistic marketing campaigns to cross-platform creative systems. ESPN Creative Studio is looking for a Design Supervisor to join its award-winning Visual Storytelling team. You will be responsible for partnering with stakeholders across multiple pillars to create impactful and sustainable design solutions, as well as leading a team of individual contributors. This position manages the design and production of artwork to meet defined needs, including review and approval of the work, as well as the presentation of animated art and graphics to internal clients. You will be responsible for the development and implementation of graphic solutions and ensuring that work incorporates design principles and established quality standards. You must resolve employee conflicts, conduct quarterly performance reviews, timesheet reconciliation, training and staff development, enforcement of all departmental SOP's and company policies and initiatives. Responsibilities: Strong creative leader who relishes pushing oneself and the Creative team beyond the expected. A passion in narrative and visual storytelling, sports, and the media industry. Implement new strategies that improve and optimize existing workflows. Interacts with direct reports and peers in management / customers / vendors to share information, transact business agreements and improve cross-departmental processes. Manage the design and production of artwork to meet defined needs. Translates approved objectives into work plans and procedures. Push for creative excellence and innovation while balancing the priorities of the business. Creative problem solver that approaches each obstacle with optimism and enthusiasm. Prepare and present creative to internal and external stakeholders. Adhere to established team workflows and processes. Build, lead, and inspire a talented team of designers. Hold regular 1:1s with your team members to foster an environment of growth and communication. Implement training programs to improve efficiency and competency of the operating staff. Basic Qualifications: Minimum 7 years of professional experience working within a creative studio or media organization. Understanding of and curiosity around shifting industry trends. A collaborative attitude and a willingness to hear all perspectives. Proven project management skills with ability to prioritize and meet multiple deadlines. Strong written and verbal communication skills. Required Education: High School Diploma or equivalent #ESPNmedia Job Posting Segment: ESPN Creative Studio Job Posting Primary Business: Edit, Animation, Graphics Innovation Playout & Creative Prod Primary Job Posting Category: Product Graphic Design - Sports Employment Type: Full time Primary City, State, Region, Postal Code: Bristol, CT, USA Alternate City, State, Region, Postal Code: Date Posted: 2025-10-10

We are seeking Mechanical Design Engineers to support several engineering projects and programs. Successful applicants will be highly motivated, innovative, self-starters with strong mechanical, technical, and problem-solving skills, and will have earned a BS/MS/PhD in Mechanical Engineering or a closely related degree. We work on exciting, technically challenging, research & development programs where multidisciplinary teams work closely to address difficult national security needs. This position will allow applicants to collaborate with subject matter experts and make meaningful contributions to project teams and their objectives. It will give applicants exposure to all parts of the R&D process, from first-principle analysis through to prototyping and testing of integrated systems. This position will be responsible for supporting senior engineers with a variety of engineering tasks from design and development to assembly and testing of complex electromechanical systems. A solid working knowledge of CAD software (e.g. SolidWorks) is required as well as standard office software skills (e.g. Microsoft Office). A basic understanding of shop tools is desirable. A successful applicant will possess good technical, problem solving, and communication skills, and they will be mentored by a professional engineer. Tasking may include: • Design, analysis, and engineering of advanced prototype systems • Fabrication, assembly and laboratory testing of systems • Travel opportunities to help test equipment in the field Required Attributes and Skills: • Experience with 3D CAD Software • Fundamental knowledge of materials, strengths, and statics analysis • Utilization of mechanical engineering principals to design mechanical elements • Ability to perform preliminary FEA on mechanical designs • General knowledge of mechanical hardware and common systems (gears, shafts, fasteners, etc.) • Ability to read and create mechanical fabrication drawings • Proficient with Microsoft Office suite Desired Attributes and Skills: • Knowledge of engineering calculation tools (Mathcad, MATLAB, etc.) • Basic understanding of geometric dimensioning and tolerancing practices • Experience with 3D printing technologies and software • Experience with microcontrollers (i.e., Arduino, Basic Stamp, Raspberry Pi) • Knowledge of software programming languages (e.g. JAVA, C#, C++, Python) Required Qualifications BS/MS/PhD in Mechanical Engineering or a closely related degree.

Quanex is looking for a Design Engineer to join our team located in New Haven, CT. Come join the Quanex Access Solutions Team (Bilco) where you can be a part of a growing team! The Bilco Brand manufactures a complete line of products that provide access for commercial building applications. Products are available in a number of standard sizes and are custom engineered to meet unique access requirements. We Offer You! * Competitive Salary * Bonus Potential * 401K with 5% company match, yours to keep after 2 years * 15% immediate return if you participate in the company's ESPP * Medical, Dental & Vision Plans * Employer paid disability plans and life insurance * Paid Time Off & Holidays * Various Work Schedules * Tuition support for degree and continuous education * Employee Resource Groups focused on employee empowerment What's attractive about the Design Engineer? * Responsibility for product development within a Lean environment, engineering documentation for all product lines, and product review and testing. * Work in collaborative environment. * Be a part of a growth oriented business. What Success Looks Like: * Initiating product design and innovation. * Ensure that products comply with all applicable codes and regulations. * Determining feasibility of manufacture and modifications necessary to alter construction of a specific product to accommodate customer requirements. * Supporting engineering staff in testing of new product prototypes, or new design applications to customer specifications. * Interacting with customers and meeting their needs. What You Bring: * Bachelor of Science degree in Mechanical Engineering or Industrial Engineering * 5+ years of product development experience * Excellent verbal and written communication skills * The ability to work closely with other engineers and others, including external customers, in a team environment. * Experience with root cause problem solving and driving improvements to designs and processes. * Experience with Solidworks and AutoCAD. The targeted salary range for this position is $78,000-$90,000 with bonus potential. About Quanex, A Part of Something Bigger Quanex (NYSE: NX) is a global, publicly traded manufacturing company primarily serving OEMs in the fenestration, cabinetry, solar, refrigeration and outdoor products markets. We are A Part of Something Bigger by improving the performance and aesthetics of end products through continuous innovation, helping customers achieve greater production efficiencies, dedication to giving back to communities where we operate, producing shareholder value and helping our employees learn, grow, and thrive. Learn more at Quanex.com. #QHP1 #LI-LG1

Rich's, also known as Rich Products Corporation, is a family-owned food company dedicated to inspiring possibilities. From cakes and icings to pizza, appetizers and specialty toppings, our products are used in homes, restaurants and bakeries around the world. Beyond great food, our customers also gain insights to help them stay competitive, no matter their size. Our portfolio includes creative solutions geared at helping food industry professionals compete in foodservice, retail, in-store bakery, deli, and prepared foods, among others. Working in 100 locations globally, with annual sales exceeding $4 billion, Rich's is a global leader with a focus on everything that family makes possible. Rich's-Infinite Possibilities. One Family. Purpose Statement The Project Engineer plays a critical role in driving engineering excellence through comprehensive analysis, process optimization, and project execution. This role leads initiatives from concept through financial justification and plant implementation, ensuring process reliability, equipment capability, and vertical start-up readiness. This role can be remote within the USA with up to 40% travel based on project needs. Key Accountabilities and Outcomes Project Management and Engineering Capability * Lead capital investment projects from ideation through closeout using sound project management, design engineering practices and TPM - Early Equipment Management (aka EEM) Pillar practices * Identify sound technical solutions that deliver efficient and reliable line performance * Proven ability to effectively lead and coordinate different project stakeholders through project justification, design development and in-plant execution through start up * Develop and manage a skills matrix and step-up card framework to build engineering, project management, and line operator capabilities * Deliver training programs and assess associate development using structured metrics * Maintain clear communication channels to ensure project requirements are understood and delivered across all teams * Lead governance and framework development to embed EEM best practices into capital and process initiatives * Manage Stage Gate review processes, templates, and associated documentation * Define and track success metrics for key projects, including line reliability, vertical start-up effectiveness, and operational performance * Collaborate with cross-functional teams-R&D, Manufacturing, TPM trios, QA, and Sanitation-to ensure TPM-readiness and successful execution * Serve as a primary communicator for project updates, reviews, and stakeholder alignment Capital Strategy and Performance Analytics * Define and monitor key performance indicators (KPIs) for capital investment and utilization to deliver step change on Rich's capital effectiveness and Value Engineering * Support capital planning efforts with process-oriented insights and ROI-based analysis Knowledge, Skills, and Experience * BS degree in engineering with 5+ years' experience in project management and design engineering in the food industry or related industry. Master's degree a plus. * Ability to create concise reporting and updates and KPI development. * Strong working knowledge of TPM and EEM pillar framework. * Proficient in Microsoft Office; experience with project management tools (MS Project or similar) and data analysis tools preferred * Proven experience leading capital projects, optimize processes, and manage cross-functional initiatives * Excellent communication and coaching skills to influence at all levels * Comfortable working independently in fast-paced environments with shifting priorities * Strong customer focus and continuous improvement mindset #CORP123 #LI-NT1 COMPENSATION In accordance with state law, the rate or range provided is Rich Products Corporation, its subsidiaries and affiliates ("Rich's"), reasonable estimate of the base compensation for this role. The actual amount may be higher or lower, based on non-discriminatory factors such as experience, knowledge, skills, abilities, shift differential, and location. Annual Range/Hourly Rate $124,520.87 - $186,781.30 Rich Products Corporation, its subsidiaries and affiliates ("Rich's"), are committed to a policy of Equal Employment Opportunity, standing up for fairness and maintaining a culture of belonging, to provide an exceptional experience for all. We will not discriminate against an applicant or employee on the basis of race, color, religion, sex, national origin, disability, military or veteran status, or any other Federal or State legally protected classes. The information collected by this application is solely to determine suitability for employment, verify identity, and maintain employment statistics on applicants. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain state or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on Rich's. Please contact Rich's Associate Experience Network at *************** if you need assistance completing this application or to otherwise participate in the application process. BRINGING YOUR BEST SELF TO WORK. As a family-owned company, caring for our associates-their whole selves-is a top priority. That's why we provide benefits and tools to help our people balance the integration of work and life: * Competitive compensation * Health & financial benefits * Paid time off * Parental leave * Family planning support * Flexible work policy * Associate resource groups * Volunteering & community impact opportunities * Holiday gatherings * In-house taste tests (we are a food company after all)! It's all part of how we support our family of associates. Because in the company of family, all things are possible. MEET RICH'S. Rich's, also known as Rich Products Corporation, is a family-owned food company dedicated to inspiring possibilities. From cakes and icings to pizza, appetizers and specialty toppings, our products are used in homes, restaurants and bakeries around the world. Beyond great food, our customers also gain insights to help them stay competitive, no matter their size. Our portfolio includes creative solutions geared at helping food industry professionals compete in foodservice, retail, in-store bakery, deli, and prepared foods, among others. Working in 100 locations globally, with annual sales exceeding $3.8 billion, Rich's is a global leader with a focus on everything that family makes possible. Rich's-Infinite Possibilities. One Family.

Job Description RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 52 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $8.9 billion. JOB TITLE/LOCATION: Applications/Design Engineer ~ Oxford, CT DESCRIPTION: The RBC Division is in search of an Application / Design Engineer to be located in our corporate office in Oxford, CT. The successful candidate will be responsible for both design and application of spherical plain bearings reporting to the SPB Product Engineering Manager. ESSENTIAL FUNCTIONS OF THE JOB: Work directly with RBC customers to satisfy their application needs. Support our external sales and business management personnel by making visits to customers to promote RBC's capabilities. Convert customer requirements into bearing designs. Derive application loading, cycles, and other operating conditions relevant to the bearing application. Based on these inputs, select or alter existing bearing designs to meet customer requirements. Develop new bearing designs as needed Participate in DFMEA, PFMEA events related to product / design application When needed, develop bearing testing requirements for validation of a proposed design. Work closely with test engineers in conducting validation testing Develop manufacturing, grinding, and assembly drawings using SolidWorks. Understand heat treatment specifications as they relate to the bearing designs. Work directly with our manufacturing plants to ensure the proper production of the product designed. Work with the manufacturing division personnel to develop methods of bearing inspection. Other duties as assigned. EDUCATION: Bachelor's degree in Engineering required, Mechanical Design preferred. EXPERIENCE: 3-10 years as Mechanical Engineer or related experience. Bearing experience is preferred. Strong mechanical aptitude SKILLS / CERTIFICATIONS: Bachelor's Degree in an engineering field. Mechanical Engineering preferred. US citizenship is required. Strong mechanical aptitude. Excellent communication skills, capability to interact with customers. 3D Modeling experience in SolidWorks (or equivalent) is desired. Proficiency with Microsoft Office Programs. Travel Approximately 25% We offer competitive compensation and excellent benefits including Medical, Dental, and company matched 401k plan. Interested candidates may send resumes to: ************************** RBC Bearings is an Equal Opportunity Employer, including disability and protected veteran status.

RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 52 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $8.9 billion. JOB TITLE/LOCATION: Applications/Design Engineer ~ Oxford, CT DESCRIPTION: The RBC Division is in search of an Application / Design Engineer to be located in our corporate office in Oxford, CT. The successful candidate will be responsible for both design and application of spherical plain bearings reporting to the SPB Product Engineering Manager. ESSENTIAL FUNCTIONS OF THE JOB: Work directly with RBC customers to satisfy their application needs. Support our external sales and business management personnel by making visits to customers to promote RBC's capabilities. Convert customer requirements into bearing designs. Derive application loading, cycles, and other operating conditions relevant to the bearing application. Based on these inputs, select or alter existing bearing designs to meet customer requirements. Develop new bearing designs as needed Participate in DFMEA, PFMEA events related to product / design application When needed, develop bearing testing requirements for validation of a proposed design. Work closely with test engineers in conducting validation testing Develop manufacturing, grinding, and assembly drawings using SolidWorks. Understand heat treatment specifications as they relate to the bearing designs. Work directly with our manufacturing plants to ensure the proper production of the product designed. Work with the manufacturing division personnel to develop methods of bearing inspection. Other duties as assigned. EDUCATION: Bachelor's degree in Engineering required, Mechanical Design preferred. EXPERIENCE: 3-10 years as Mechanical Engineer or related experience. Bearing experience is preferred. Strong mechanical aptitude SKILLS / CERTIFICATIONS: Bachelor's Degree in an engineering field. Mechanical Engineering preferred. US citizenship is required. Strong mechanical aptitude. Excellent communication skills, capability to interact with customers. 3D Modeling experience in SolidWorks (or equivalent) is desired. Proficiency with Microsoft Office Programs. Travel Approximately 25% We offer competitive compensation and excellent benefits including Medical, Dental, and company matched 401k plan. Interested candidates may send resumes to: ************************** RBC Bearings is an Equal Opportunity Employer, including disability and protected veteran status.

DIRECT HIRE: An amazing opportunity for an experienced Aerospace Engineer to join a dynamic team in the Manchester, CT. area. The successful candidate must have a CNC Machinist background. This isn't a desk-only role. This position bridges design and manufacturing, develops machining processes. The candidate will write and optimize CNC programs. Also work hands-on with machinists to deliver aerospace-grade precision. Salary: $120K - $130K (Based on Experience) Schedule: Monday - Friday, 8AM - 5PM (flexible) Benefits: Medical, dental, vision, 401K, PTO, holidays Role & Responsibilities: Develop and improve CNC processes for aerospace components Program, set up, and optimize multi-axis mills and lathes Support design reviews and ensure manufacturability of complex parts Collaborate with production and quality teams to meet AS9100D / NADCAP standards Lead continuous improvement for tooling, setup time, and cycle efficiency Skills & Experience: Proven CNC machining expertise - you've run the machines yourself Strong aerospace or precision manufacturing background Working knowledge of GD&T, CAD/CAM, and process documentation Ability to solve problems on the shop floor and communicate across teams Engineering degree preferred but not required - hands-on skill is a must Must possess a minimum 10 years' CNC Machinist experience Once you apply, please text "AE" to ************ for a faster reply. INDH

Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Job Description Supports the manufacture of products to ensure Operations core metrics are successfully achieved. Provides technical leadership and support of manufacturing improvements and floor support for assigned product lines. Principal Accountability: Provides engineering support for troubleshooting efforts for any process issues in designated area. Summarize and draw conclusions from test results leading to effective technical resolution of process problems. Develops and maintains the documentation necessary to ensure the consistent manufacture of MITG products (processes, drawings, and shop floor paperwork). Works with Process Development engineers to ensure design for manufacturing elements are incorporated into PDP activities. Identifies, justifies, and implements significant data driven projects to reduce manufacturing costs, improve processes, increase product reliability, and enhance process capability. Designs and evaluates new and existing fixtures and equipment, test methods, specifications, layouts, and standards supporting a Lean manufacturing environment. Identify and recommend manufacturing technologies to strategically develop business objectives and potential opportunities. May have supervisory responsibility for technician staff. Comply with applicable FDA and international regulatory laws/standards and the MITG Code of Conduct. Other duties as assigned or required Additional Information Please contact: Sagar Rathore ************ ******************************

Position Type: Full Time, 40h/week FLSA Classification: Exempt Salary Range: $85000- $95000 annually. The actual pay range will depend on a variety of varying circumstances and individualized factors, such as job-related knowledge, skills, experience, and other objective business considerations. Reports To: Design Engineering Manager Company description: Roto North America is a subsidiary of Roto Window and Door Technology, a global leader in window and door hardware, with 18 production plants and more than 30 subsidiaries worldwide. Through its 2 companies, Roto Frank of America, Inc. and Roto Fasco Canada, Inc., Roto North America has been manufacturing and offering a variety of leading North American and European window and door hardware products in the USA and Canada. To learn more about Roto Frank of America please visit us at: Welcome - Roto North America Summary: The Design Engineer, reporting to the Design Engineering Manager, is responsible for the design and development of new products following a Stage Gate Process. They will support operational activities including Manufacturing and Quality. They will provide Sales and Marketing support. The ideal candidate will have a focus on continuous improvement and Lean Activities. Essential Functions: Engineering and Design of locking, operating, and rolling components used in the residential window and door (fenestration) industry. Provide technical solutions for existing product improvement opportunities. Interface with sales team and customers to provide market driven product solutions. Provide designs that meet volume and budget expectations which involve domestic and overseas supply/manufacturing options. Drive value engineering of existing and new product development based on market needs. Develop and adhere to test protocols to ensure current and new products meet market performance and operational benchmarks. Support Manufacturing and QC departments to resolve production issues related. Maintain documentation of existing products per engineering document control protocol. Operate on-time and within budget. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Skills and Competencies: Ethical Conduct Analytical Skills Ability to meet tight deadlines and work on multiple topics in parallel High level of discretion and confidentiality, both internally and externally Familiar with manufacturing processes, including die-casting, injection molding, and stamping Mechanical/hands on aptitude Excellent organizational and communication skills Other Skills: Working knowledge of machine design, kinematics, dynamics, and structure analysis. Product management experience from concept to launch. A working understanding of materials knowledge including metals, plastics, and coatings. Proficient in 2D and 3D CAD. Minimum Required Education: Bachelor's Degree or higher in Mechanical Engineering (or related field). Required Work Experience: 5+ years in engineering design role in a manufacturing environment or equivalent experience. Prefer experience in the window and door industry but not required. Minimum 3 years' experience required in CREO. Travel Requirements: Minimum travel Work Environment: This position operates in a professional office environment, and routinely uses standard office equipment such as computers, phones, copiers, scanners, printers. Prolonged periods of sitting at a desk and working on a computer. Must be able to lift up to 20 lbs. Company offered benefits: Roto offers an attractive salary and benefits package: 401(k) 401(k) matching Employee assistance program Employee discount program Medical insurance Dental insurance Vision insurance Flexible spending account Health savings account Life insurance Short Term Disability insurance Voluntary Long Term Disability insurance Paid time off Paid Holidays

Headquartered in Old Saybrook, CT, Infiltrator Water Technologies is the leading provider of engineered plastic chambers, synthetic aggregates, tanks, advanced wastewater treatment systems, and accessories for the onsite/decentralized wastewater and storm water management industries. The majority of Infiltrator products are manufactured from recycled plastic. Founded in 1987, we operate throughout the US and Canada with 8 manufacturing plants in the US, dedicated sales, and corporate team members. Infiltrator is a pioneer in innovative plastic technologies for underground water management. Infiltrator components are used in most onsite septic systems installed in the United States and Canada. Infiltrator is a proud Corporate Partner of Habitat for Humanity and each year donates components for 50 septic systems serving Habitat homes in North America. Infiltrator is committed to advancing the state of the art in all fronts, including product design, manufacturing, materials, wastewater science, marketing, management, and employee development. In other words, we strive to be the best we can be. Responsibilities Infiltrator Water Technologies has an exciting new role available - Product Design Engineer II. We are seeking an experienced and talented Mechanical Engineer with expertise in plastic design. Here is a bit about the role: New Product development including engineering concept, design analysis, calculations and problem solving. Conduct form/fit feasibility studies on new product concepts. Address product design issues with respect to tooling and manufacturing with other team members. Provides technical support to other departments. Works directly on the development of prototype parts. Responsible for CAD design, drawings and changes. Responsible for conducting design reviews and drawing reviews Apply project management principles to define task workload and timelines. Assure technical quality and design process rigor in execution of all assigned tasks. Apply product lifecycle management approach through PDM software QUALIFICATIONS: Excellent written/verbal communication skills and superior interpersonal skills for interaction with all levels of personnel and contacts within and outside IWT. S. in Mechanical Engineering, preferably with a concentration in plastics part design and molding. Proven creative skills in product design and problem solving through coursework or personal interests. Must have at least 5+ years designing 3D (physical) products that have a high percentage of plastic materials. Hands-on physical skills associated with product development extremely important. Experience with working in a shop environment and ability to make simple prototypes highly desirable. 5+ years with CAD experience required; SolidWorks preferred. Experience with a range of materials (particularly various plastics) and processes (injection molding, thermoforming). Must possess a comfort level with (and interest in) working in a very fast-paced product development environment where ideation and product design rapidly evolve. #HP EEO Statement ADS supports an inclusive workplace that values diversity of thought, experience, and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. ADS is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law.

About Company: LiquidPiston is a technology-driven company reimagining the internal combustion engine. Leveraging advanced thermodynamic cycles and innovative rotary engine architecture, we design compact, efficient, and powerful engines for applications where size, weight, and fuel efficiency matter most - from drones and military equipment to portable generators and hybrid-electric vehicles. Our patented X-Engine platform challenges conventional piston engine paradigms and enables breakthrough performance improvements. Job Summary: We are seeking an experienced Manufacturing Engineer to join our client's team. The successful candidate will work closely with design engineers, internal and external machine shops, and our engine build team to ensure high-quality and efficient production of (challenging!) prototype rotary engine parts and assemblies. Responsibilities: Design, implement, and optimize manufacturing processes Troubleshoot technical issues in the internal machine shop Maintain quality controls appropriate for the size, scope, and timeline of each project Provide technical support for introduction of new components into supply chain, including Solidworks fixture/tooling design Procure materials, tooling, components, etc. from external suppliers Develop and maintain strong relationships with existing supply base, while sourcing and evaluating potential new relationships Negotiate pricing, terms, and contracts Monitor supplier performance Analyze market trends and recommend strategies to reduce costs and mitigate manufacturing risks Qualifications: Bachelor's degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, or related field Minimum of 3-5 years of experience in manufacturing engineering and procurement, working with high precision metal parts Advanced understanding of manufacturing processes including machining, heat treatment, welding, coatings, and additive Proficiency with CAD/CAM Experience with procurement, supplier management, contracts. Knowledge of lean manufacturing principles, Six Sigma, or other continuous improvement methodologies. Excellent problem-solving skills and the ability to work in a fast-paced environment. Strong communication, negotiation, and interpersonal skills. Proficiency with Microsoft Office Suite (Excel, Word, PowerPoint) and ERP systems (e.g., SAP, Oracle). Benefits & Perks Flexible PTO: We value work-life balance and encourage time to rest and recharge. Health & Wellness: Comprehensive medical, dental, and vision coverage-you choose what works best for you. Equity Participation: Permanent employees receive RSUs (Restricted Stock Units). 401(k) Match: We offer a 401k w/100% matching up to 3% of your salary and then 50% of contributions between 3-5% Career Growth: Ongoing training, mentorship, and learning opportunities to accelerate your growth. Our Culture At LiquidPiston, we embrace challenges, move fast, and celebrate curiosity. Our team thrives on collaboration, creativity, and perseverance. We understand that innovation involves risk-and we're not afraid to fail as we move forward. Equal Opportunity Employer LiquidPiston, Inc. is proud to be an Equal Opportunity Employer. Qualified applicants will not be discriminated against, and receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, or protected veteran status or disability. All offers of employment at LiquidPiston are contingent upon successful completion of a pre-employment background check and drug screening.

Job Purpose: Design and implement efficient manufacturing processes and systems that optimize production while maintaining quality and cost-effectiveness. Support technical problem-solving and coordinate new process implementation using Lean Manufacturing principles. Key Responsibilities: + Manage manufacturing launch for new/revised products + Create and update BOMs and routings in production systems + Design manufacturing processes and equipment to improve capability and quality + Create / update manufacturing instructions as designs are improved + Develop and test tools and machinery for improved manufacturing methods + Solve production workflow issues (bottlenecks, machine reliability, waste reduction) + Prepare facility/equipment layouts using CAD software + Provide technical guidance for manufacturing activities + Collaborate with Engineering, Purchasing, and global teams + Prepare feasibility studies and cost justifications + Monitor production and implement efficiency improvements Requirements: + Bachelor's Degree in Engineering (Manufacturing Engineering preferred) + Knowledge of machine design, welding, and special processes + Strong leadership skills and self-motivation + Statistical Process Control (SPC) implementation ability + Proficiency with3D CAD (SolidWorks or Creo a plus) and MS Office + Strong Tooling and Fixture design Preferred Qualifications: + 5+ years manufacturing experience + Lean Manufacturing experience or certification + Oil & Gas industry experience + Understanding of GD&T and dimensioning Travel Requirement: This role may require domestic and potentially international travel of up to: \#LI-KP1 Equal Employment Opportunity Weatherford is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Responsible for driving and managing the market strategy and technical evaluation during the sales process, while also working on other elements with the team as the key product advisor. Essential Duties and Responsibilities: List what the person must do to perform the job to meet standards. Assists customers with heat load calculations, equipment selection & quotation, sizing of hydronic & DX coil, sizing and quotation of direct fired equipment Responsible for Product demonstrations/presentations to key owners and engineers Acts as the primary technical resource for the field sales force - Reps Represents the product at field events such as conferences, seminars & office visits Pursues education of key technical requirements that support product applications such as staying well versed with ASHRAE Std. 189.1 Gain familiarity of the various energy rebate programs available throughout the country Develop literature and other promotional tools to achieve the goals of the Business Model and marketing strategy Responds to functional and technical elements of RFIs/FRQs Conveys customer requirements to Project Management team and Customer Service Work with Product Management to identifies technical issues related to product design and customer requests Assures complete customer satisfaction through all stages of the marketing & sales process Travel as permitted to work with Representatives & OEM accounts and visit manufacturing facility. Typically, once or twice a quarter. Performs other similar or related duties as required or requested

Job DescriptionDIRECT HIRE: An amazing opportunity for an experienced Aerospace Engineer to join a dynamic team in the Manchester, CT. area. The successful candidate must have a CNC Machinist background. This isn't a desk-only role. This position bridges design and manufacturing, develops machining processes. The candidate will write and optimize CNC programs. Also work hands-on with machinists to deliver aerospace-grade precision. Salary: $120K - $130K (Based on Experience) Schedule: Monday - Friday, 8AM - 5PM (flexible) Benefits: Medical, dental, vision, 401K, PTO, holidays Role & Responsibilities: Develop and improve CNC processes for aerospace components Program, set up, and optimize multi-axis mills and lathes Support design reviews and ensure manufacturability of complex parts Collaborate with production and quality teams to meet AS9100D / NADCAP standards Lead continuous improvement for tooling, setup time, and cycle efficiency Skills & Experience: Proven CNC machining expertise - you've run the machines yourself Strong aerospace or precision manufacturing background Working knowledge of GD&T, CAD/CAM, and process documentation Ability to solve problems on the shop floor and communicate across teams Engineering degree preferred but not required - hands-on skill is a must Must possess a minimum 10 years' CNC Machinist experience Once you apply, please text "AE" to ************ for a faster reply. INDH Powered by JazzHR sf UuqXFMJT

The objective of this position is to provide technical support to manufacturing and process development of precision aerospace bearings. Principle responsibilities are to solve technical problems supporting production, and manage technical projects to completion. This may include machine rebuilds, corrective actions, new product launches, lean activities, tooling design, etc. Candidates must have the ability to problem solve, communicate effectively, work well on teams, understand lean manufacturing, CAD, machine shop skills. knowledge of grinding theory and bearing technology a plus. Requirements BS in Mechanical Engineering, Mechanical Engineering Technology, Industrial Engineering, Systems Engineering, Industrial and Systems Engineering, Industrial Engineering Technology RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion.

Responsible for driving and managing the market strategy and technical evaluation during the sales process, while also working on other elements with the team as the key product advisor. Essential Duties and Responsibilities: List what the person must do to perform the job to meet standards. * Assists customers with heat load calculations, equipment selection & quotation, sizing of hydronic & DX coil, sizing and quotation of direct fired equipment * Responsible for Product demonstrations/presentations to key owners and engineers * Acts as the primary technical resource for the field sales force - Reps * Represents the product at field events such as conferences, seminars & office visits * Pursues education of key technical requirements that support product applications such as staying well versed with ASHRAE Std. 189.1 * Gain familiarity of the various energy rebate programs available throughout the country * Develop literature and other promotional tools to achieve the goals of the Business Model and marketing strategy * Responds to functional and technical elements of RFIs/FRQs * Conveys customer requirements to Project Management team and Customer Service * Work with Product Management to identifies technical issues related to product design and customer requests * Assures complete customer satisfaction through all stages of the marketing & sales process * Travel as permitted to work with Representatives & OEM accounts and visit manufacturing facility. Typically, once or twice a quarter. * Performs other similar or related duties as required or requested The Sales & Application Engineer must possess the experience and knowledge listed below: * B.S.M.E. is strongly preferred * 5+ years of relevant experience in HVAC systems * Must be able to articulate product technology to Owners, Architects, Engineers and internal personnel * Familiarity with building design documents, plans and specifications * Experience and familiarity of LEED qualifications is a plus * Ability to use computer software, including Word, Excel, PowerPoint, & Outlook * Strong presentation skills including presentation design towards the specific audience being targeted * Must be able to establish and maintain strong relationships with building owners, engineers and representatives