Design engineer jobs in Pasco, WA

Job DescriptionOverview We are seeking a Communications Design Engineer - Rail & Transit to join our team in Seattle, WA, Austin, TX, New York, NY, Washington, DC, and Sacramento, CA Under general direction, provides technical expertise within the area of communications engineering for diverse activities throughout the assigned area of responsibility and/or companywide. May function as lead designer or technical consultant. Upholds engineering ethics and standards of conduct. Your role Leads the design, integration, and commissioning of communications systems, including but not limited to radio networks, fiber optic infrastructure, data transmission systems, and digital signalling for passenger and freight rail environments. Ensures all communications systems are engineered to meet operational requirements, safety standards, cybersecurity, and regulatory compliance. Coordinates multidisciplinary teams to deliver complex communications projects, collaborating with signalling engineers, IT specialists, systems integrators, and operations staff. Oversees the development and review of system architectures, interface specifications, and test procedures to ensure seamless interoperability between communications subsystems and legacy infrastructure. Provides technical leadership during system hazard analysis, failure mode and effects analysis (FMEA), and safety/cybersecurity certification processes. Acts as the primary technical liaison with clients, regulatory agencies, and third-party vendors on all matters related to communications systems, ensuring that project deliverables meet or exceed industry best practices and client expectations. Defines scope of communications projects, with full responsibility for interpreting, organizing, and executing project assignments related to communications systems. Selects problems for investigation, developing novel approaches and solutions to technical challenges in communications engineering. Conducts quality control checks, reviewing calculations, designs, evaluations, and specifications developed by design staff for accuracy and completeness, performing on-site inspections and reviews of communications installations, and conducting or overseeing remedial design work. Keeps abreast of state-of-the-art methods and developments in communications systems, digital networks, and cybersecurity for rail/transit. Recommends changes or improvements to communications plans and programs, ensuring compliance with industry standards and regulatory requirements (e.g., FRA, FTA, IEEE, AREMA). May function as the project manager for routine to semi-complex communications projects. Responsibilities may include marketing, negotiating contracts, budgeting, financial management, schedule coordination, and resource allocation. Performs other duties as assigned by supervisor, particularly those related to communications systems. Work involves coordination, research and problem solving on a variety of engineering projects with unique or controversial problems, the solution of which has an important effect on major organization programs. Supervision received is essentially administrative, with assignments given in terms of broad general objectives and limits. Acts independently on technical matters relating to his/her field. Work direction given to others: Supervises and/or coordinates with other senior professionals and support staff. Interfaces with senior technical professionals, technical managers, and administrative staff and managers as necessary. Represents the organization in conferences with clients, prospective clients, and regulatory agencies. About you B.S. or M.S. in Electrical Engineering, Communications Engineering, Systems Engineering, or related field. M.S. or graduate-level technical coursework preferred. P.E. license is Desired. This level may be achieved by engineers with ten years' experience since B.S. or nine years since M.S., with significant experience in communications systems for rail/transit or similar environments. Typical incumbent has 15 to 20 years of experience in communications engineering. 10 or more years of rail/transit experience focused on communications is required. Strong technical writing and communications skills, proven through technical presentations, technical papers, and/or participation in technical committees. Demonstrated expertise in train control, signalling, and related safety-critical systems. Familiarity with industry standards (e.g., AREMA, IEEE, FRA, FTA) and safety certification processes. General Competencies expected of all Professionals and Managers are as follows: Client Service, Commitment, Communication, Innovation & Continuous Improvement, Professionalism, Quality, and Teamwork. Ability to process paper/electronic documents and utilize computer equipment; ability to communicate clearly both orally and in writing; ability to visit project sites if necessary. Job also requires ability to plan, prioritize and review project plans and documents, evaluate alternatives, and select appropriate solutions. Rewards & benefits At AtkinsRéalis, our values-Safety, Integrity, Collaboration, Innovation, and Excellence-are more than just words. They are the foundation of who we are and how we work. These principles shape our culture, guide our decisions, and inspire us to create an environment where every team member feels empowered to grow, succeed, and make a meaningful impact. Depending on your employment status, AtkinsRéalis benefits may include medical, dental, vision, company-paid life and short- and long-term disability benefits, employer-matched 401(k) with 100% vesting, employee stock purchase plan, Paid Time Off, leaves of absences options, flexible work options, recognition and employee satisfaction programs, employee assistance program, and voluntary benefits. You can review our comprehensive benefits page here. About AtkinsRéalis We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. Find out more. Additional information Expected compensation range is between $101,900-$169,800 annually depending on skills, experience, and geographical location. Are you ready to expand your career with us? Apply today and help us shape something extraordinary. AtkinsRéalis is an equal opportunity, Drug-Free employer EOE/Veteran/Disability Please review AtkinsRéalis' Equal Opportunity Statement here. Upon acceptance of an offer, all candidates must go through a drug screen test and background check. AtkinsRéalis is a federal contractor which mandates a satisfactory background screening report and drug test. Qualified applicants with arrest or conviction records will be considered for Employment in accordance with the following laws if applicable, the Los Angeles County Fair Chance Ordinance for Employers, the Los Angeles' Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. This position is not available for individuals living or working in New York City. AtkinsRéalis believes that conviction records may have a direct, adverse, and negative relationship to the following job duties: accessing company property, information, assets, and products; accessing confidential information and partnering and regularly working with or supervising other AtkinsRéalis employees and interacting with AtkinsRéalis clients including government property or ports. AtkinsRéalis cares about your privacy and is committed to protecting your privacy. Please consult our Privacy Notice on our Careers site to know more about how we collect, use and transfer your Personal Data. By submitting your personal information to AtkinsRéalis, you confirm that you have read and accept our Privacy Notice. Note to staffing and direct hire agencies: In the event a recruiter or agency who is not on our preferred supplier list submits a resume/candidate to anyone in the company, AtkinsRéalis family of companies, we explicitly reserve the right to recruit and hire the candidate(s) at our discretion and without any financial obligation to the recruiter or agency. ***************************************************** Worker TypeEmployeeJob TypeCasual At AtkinsRéalis , we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences.

careersite--jobs--form-overlay#show FormOverlay" data-careersite--jobs--form-overlay-target="cover Button"> Apply for this job blocks--cover--scroll#handle ScrollDown" title="Scroll to content"> Mechanical Engineer (Entry Level) Summary We are looking for a mechanical engineer to join our industrial process team. As a mechanical engineer, you will be responsible for designing, developing, and documenting systems in a variety of industrial facilities with a primary focus on food processing. You will also collaborate with other engineers, designers, and construction crews to ensure optimal performance, quality, and safety of our client's systems. To be successful in this role, you should have a bachelor's degree in mechanical engineering or a related field, and zero to ten years of relevant experience. You should also have a strong knowledge of mechanical design, thermodynamics, fluid mechanics, and materials science. You should be proficient in using CAD software, such as SolidWorks, AutoCAD, and/or Revit and be familiar with industry standards and regulations. You should also have excellent communication, problem-solving and teamwork skills. Duties and Responsibilities * Perform on-site surveys of a facility's equipment and systems * Perform reality capture services using 3D scanning equipment * Write up field notes and meeting minutes * Produce design documentation including drawing packages, P&IDs, and FDDs * Produce project documentation including scopes, schedules, and budgets Skills and Qualifications * Writing, communication, and presentation skills * Excel skills and Windows software platform knowledge and experience * AutoCAD, SolidWorks, and/or Revit experience is strongly preferred * Strong work ethic * Good attitude and willing and eager to learn Education and Experience * Bachelor of Science in Mechanical Engineering or equivalent * Engineer-in-Training (EIT) required * 0-3 years of experience in mechanical systems design * Construction and fabrication knowledge is a plus All employees are subject to a pre-employment drug screen. Please apply online at *************************** Affirmative Action/EEO statement As an Affirmative Action, Equal Opportunity Employer, Apollo Mechanical Contractors "Apollo" ensures that no applicant for employment or employee of Apollo is denied equal opportunity because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability (mental or physical), genetic information, veteran status, or any other characteristic any characteristic of his or her relatives, friends, or associates. Department Engineers Role Mechanical Engineer (Entry) Locations Kennewick About Apollo Mechanical Contractors Apollo Mechanical Contractors is a Native American-owned business that officially began operations in 1981 under the guidance and vision of owner Bruce Ratchford. Apollo is based in Kennewick, Washington, performing Full Mechanical projects across the United States and around the world. Apollo employs over 2000 people, with annual revenues of over $600 Million. Apollo Sheet Metal officially began operations in 1981, building on a vision that originated in the mid-1970s by owner Bruce Ratchford. With a decade of experience and expertise in mechanical design and business management, Mr. Ratchford incorporated Apollo in Richland Washington, to serve the Tri-Cities' construction needs. Since 1981, Apollo has expanded its market to include locations across the United States and multiple countries. Apollo has progressively grown larger than its original scope and has expanded its operations to specialize in mechanical construction for correctional facilities, hospitals, laboratories, high tech data centers, schools, and industrial facilities. careersite--jobs--form-overlay#show FormOverlay">Apply for this job Engineers · Kennewick Mechanical Engineer (Entry Level) Loading application form jobs--overlay#close Overlay">

Join ENERCON as a Part-Time Principal Mechanical Engineer. We are seeking accomplished Mechanical Engineers at the Principal level to bring their expertise to high-impact projects. This flexible, part-time role (averaging 30 hours or less per week) allows seasoned professionals to continue shaping innovative solutions while maintaining work-life balance. If you are looking to share your years of knowledge, we encourage you to explore our exciting opportunity and become part of our innovative and impactful team. What divisions could you work for? Nuclear Services Group (NSG) ENERCON Federal Services (EFS) Responsibilities A typical day may include being part of a multi-discipline engineering team for major projects such as cooling water systems (pumps, motors, control systems, piping, heat exchangers) for existing or new power plants. Other days you may be leading simple design projects such as valve replacements or writing engineering reports (such as corrosion studies or pros and cons of different equipment). You will also: Deliver High-Quality Engineering Documents: Prepare accurate and error-free drawings, sketches, calculations, and analyses that meet industry codes, standards, and regulations, ensuring client needs are met with precision Adhere to Standards: Develop engineering documents in alignment with client, ENERCON, and regulatory requirements while following established procedures, processes, and project directives Stay Ahead of the Curve: Keep your knowledge sharp and current with industry codes, standards, safety culture principles, and advanced design techniques tailored to the nuclear sector Commit to Excellence: Produce engineering deliverables that meet stringent quality assurance standards, aligning with project scopes and exceeding client expectations Build Lasting Client Relationships: Establish trust and rapport with clients through clear communication, professional interactions, and the delivery of exceptional engineering solutions Collaborate Across Disciplines: Work closely with other teams to ensure designs are comprehensive, integrated, and consider the needs of all disciplines involved #LI-AS1 Get Hands-On in the Field: Travel to plant sites to connect with client personnel, conduct on-site walkdowns, and evaluate plant structures, systems, and components firsthand to inform project work #LI-MB1 Qualifications Bachelor's Degree in Mechanical Engineering from an accredited university or equivalent 10 years of prior experience in nuclear or power generation design of mechanical systems Experience in one of the following industries required: engineering/design services, power generation, nuclear power, heavy industrial including chemical or pulp & paper, and government (DOE) projects Nuclear Engineering Change qualifications from any site that can be transferred are preferred 10CFR50.59 Screen and / or Evaluation qualifications that can be transferred are preferred Thermal-hydraulic and design modification experienced desired Demonstrated proficiency in preparation of mechanical calculations Proficient in Word and Excel Good writing, presentation and communication skills Ability to be an individual contributor and work effectively in teams Candidates who have mentorship experience or a desire to mentor early to mid career engineers preferred Must be able to get badged at a nuclear facility Must be able to perform plant walkdowns Pay Range USD $90,000.00 - USD $177,450.00 /Yr. Additional Information About ENERCON: At Enercon Services, Inc. (ENERCON), we're driven by our people-and we're proud to offer rewarding careers in a culture of excellence. We provide a comprehensive benefits package and professional development opportunities that support your long-term growth. What We Offer: Enjoy full benefits for you and your dependents starting day one, no waiting period Flexible work arrangements, including hybrid and alternative schedules 401(k) with employer matching Tuition reimbursement Professional Engineer (PE) license support and incentives Want to see the full picture? Click HERE to see our Comprehensive Benefits Salary Range Information: If a salary range is listed, it reflects the typical range for this full-time position based on the role, level, and location. Individual compensation within the range will be determined by factors such as work location, relevant experience, job-related skills, and education or training. Eligibility to Work: Candidates must be legally eligible to work in the US without requiring current or future sponsorship. Ability to pass a pre-employment and random drug and alcohol screenings, ENERCON and client specific background checks, and annual motor vehicle record (MVR) according to company and client policies. Equal Opportunity Employer: ENERCON does not discriminate in employment opportunities or practices based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. Connect with Us: *************** | LinkedIn

Title Mechanical Engineer *Repost* Number 40419 Company Hanford Tank Waste Operations City/State Richland, WA Closes 01/03/2026 Regular/Temporary Regular Full/Part-Time Full-Time Job Responsibilities/Duties Hanford Tank Waste Operations & Closure (H2C) delivers exceptional performance in safely removing, treating, and disposing of tank waste. H2C leads the nation's largest and most complex radioactive waste cleanup, including closure of the legacy waste tanks at Hanford containing 56 million gallons of radioactive and chemical waste. Joining H2C means becoming part of a team dedicated to creating "The Solution Today for a Better Tomorrow." At H2C, our culture is deeply rooted in our Vision, Mission, Values, and Behaviors, which guide our efforts on the Hanford Site and within our communities. Our vision to tackle the Department of Energy's largest environmental challenge reflects our commitment to leaving a positive legacy for future generations. We strive to deliver exceptional performance in safely removing, treating, and disposing of tank waste. Our values emphasize living safely, acting with integrity, and working collaboratively as a team. We encourage innovation, personal accountability, and continuous improvement, fostering an environment where everyone is empowered to contribute to our mission and celebrate our achievements. By embracing these principles, you will be part of a forward-thinking organization dedicated to making a meaningful impact today and for the future. Hanford Tank Waste Operations & Closure (H2C) is the tank farm operating contractor at the Hanford Site located in Richland, WA. The H2C mission is to safely store, retrieve, and treat 56 million gallons of legacy radioactive and hazardous waste. This complex mission spans all competencies of engineering/science accomplished through a highly integrated engineering organization. Engineering at H2C supports all areas of the tank farm mission including Production Operations, Field Projects, Waste Feed Delivery Projects, Retrievals, and long term innovations. Production Operations Engineering provides a variety of engineering services in support of the operation and maintenance of Integrated Tank Disposition Contract (ITDC) facilities and ensuring proper implementation of engineering requirements, including: developing inputs, assumptions and design criteria for tank farm facility modifications; administrating the System Engineering program and providing Cognizant System Engineering (CSE) and Shift Technical Engineer (STE) support to facilities; providing resident waste transfer and characterization technical expertise and facility knowledge in support of operability determinations, performance monitoring program, centralized resolution of Structures, Systems, and Components (SSC) performance problems; and providing Maintenance Engineering support. H2C is seeking mechanical engineers responsible for providing engineering support to the AZ Team that is responsible for east area tank farms (A, AX, B, BX, BY, C, AN, AW, AY, AZ and 702AZ Facility) and ST Team that is responsible for west area tank farms (S, SX, SY, T, TX, TY, U) directly supporting the ITDC facilities and H2C Engineering. Duties of the mechanical engineer typically include design, analysis, testing, control, operation, monitoring, and maintenance of mechanical and ventilation systems. The specific engineering duties will include the following: * Obtain and maintain engineering Technical Staff qualification and Design Authority qualification for assigned systems * Engineering support to nuclear and/or non-nuclear mechanical systems, exhaust ventilation systems, HVAC systems, facility equipment and instrumentation, and control systems * Define and maintain ITDC System technical baseline documents and design change documents * Monitor and trend system performance and reliability for assigned systems and participate in Plant Health Committee meetings covering system health and corrective action reporting * Operations support on design changes, work packages, technical evaluations, operating and maintenance procedures, data sheets, material requests, spare parts, and field walk downs * Verify and comply with ITDC engineering documentation standards and procedures * Make technically defendable engineering decisions and represent the H2C Engineering organization with other company organizations and stakeholders * Maintain working knowledge of the documented safety analysis and environmental permits * Develop and sustain positive working relationships with operational and organizational customers * Attend weekly meetings with operations, engineering, and organizational teams * Ability to execute tasks with minimal oversight * Ability to solve technical engineering problems The successful candidate will possess excellent communication, interpersonal skills, and engineering ability to support operations, maintenance, and facility customers in office, facility, and field settings. Required Qualifications Grade 15: Bachelor of Science (BS) degree in Mechanical Engineering or related technical discipline; and One (1) years of related experience Grade 16: Bachelor of Science (BS) degree in Mechanical Engineering or related technical discipline; and Two (2) years of related experience Note the essential duties for this grade level are like that of the previous grade level, however the scope of responsibility is larger, and the expected level of performance is increased. Grade 17: Bachelor of Science (BS) degree in Mechanical Engineering or related technical discipline; and Five (5) years of related experience Note the essential duties for this grade level are like that of the previous grade level, however the scope of responsibility is significantly larger, and the expected level of performance is greatly increased. Desired Qualifications Knowledge of codes and standards Familiarity with ASME B16.5, ASME B31.1, ASME B31.3, ASME AG-1 Experience in a nuclear facility Previous experience providing engineering support for operation, maintenance, and/or facilities. Compensation & Benefits In accordance with the company's philosophy on compensation for exempt and salaried non-exempt employees, H2C takes into consideration a variety of factors when determining initial grade and salary to include assigned job scope and responsibility, a candidate's qualifications as compared to internal comparators performing in a similar role, and the external labor market. A salary offer will be made at the appropriate grade level and within the targeted hiring range posted according to these factors. Note a candidate's prior salary history will not be taken into consideration. Hiring Range Minimum: $80,225 Hiring Range Maximum: $122,113 H2C offers a comprehensive benefits package to include medical/dental/vision, short-and long-term disability, life insurance, 401(k) with employer match, and paid time off. For a full list of benefits please visit************************************************* Relocation Funding Provided Yes U.S. Citizenship Required Yes Clearance Required No Job Classification Exempt Shift Work Required No This contractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability. Applicants and employees have rights under Federal Employment Laws and are protected under federal law against discrimination. To view information regarding these rights, please click on these links: + Know Your Rights: Workplace Discrimination is Illegal (********************************************************************************************************** + Pay Transparency Policy Statement + Family Medical Leave Act (******************************************************************* + Employee Polygraph Protection Act + WA State Paid Family Medical Leave (*********************************************************************************************

TerraGraphics Environmental Engineering, Inc. seeks qualified Senior Mechanical Engineer candidates for future positions. The successful candidates will be self-motivated, organized, and detail-oriented individuals who can work well on a team and independently in a fast-paced environment. Qualified applicants to this position will be placed on a roster for potential future openings based out of our Pasco office. In this position, the candidate will perform detailed design and analysis of mechanical systems with emphasis on piping systems, process vessels, and customized mechanical equipment designs, both for industrial and nuclear applications. Responsibilities mayinclude: Participating in multidiscipline design teams to develop detailed designs Working independently to develop specific design media to meet client design criteria and objectives Development and/or review of design media that will be issued for construction Preparing design drawings, design calculations, equipment procurement specifications, fabrication and construction specifications Reviewing and evaluating customer design criteria and interpreting and applying design codes and standard to ensure design products conform to approved design criteria, preparing or reviewing design calculations and design drawings or sketches for correctness and accuracy Provide support during construction/start-up and testing phases of projects including procurement support, submitting reviews, responding to requests for information, and documenting engineering changes Required Education/Experience Bachelors degree in Mechanical Engineering 10+ years experience Demonstrated knowledge of mechanical and nuclear codes Proficient use of Microsoft Suite products such as MS Word, MS Excel, and MS Power Point Desired Qualifications PE License DOE or Hanford Experience strongly preferred

Company: Columbia Energy & Environmental Services Salary: $120,000 - $180,000 DOE Columbia Energy & Environmental Services, headquartered in Richland, WA, is a well-established small business with a strong track record of delivering comprehensive solutions in engineering, design, fabrication, instrumentation and controls, and other specialized services. With expertise in fixed-price design/build/test projects, we serve both federal and commercial clients, consistently delivering high-quality results through innovation and technical precision. Our collaborative and experienced team is committed to providing practical, client-focused solutions tailored to address a wide range of challenges. Recently, we expanded our operations to Idaho Falls, ID, reflecting our ongoing growth and dedication to broadening our capabilities. We take pride in maintaining a strong reputation for quality and integrity while ensuring compliance with rigorous industry standards. Why Join Columbia Energy? At Columbia Energy, we foster a supportive and innovative environment where team members can thrive. As a growing small business with ambitious goals, we value initiative, teamwork, and a dedication to quality. This role offers the opportunity to lead impactful projects, serve as a mentor to junior engineers, and play a key role in advancing our technical capabilities. Veterans are strongly encouraged to apply. Position Overview We are seeking an accomplished Principal Mechanical Engineer to join our team in Richland, WA. This role provides opportunities to serve as a technical lead, project engineer, and mentor to project teams while contributing to complex design/build/test projects. The successful candidate will bring a combination of deep technical expertise, leadership ability, and a collaborative mindset to drive innovative solutions for nuclear and hazardous waste remediation, chemical processing, and nuclear ventilation systems. Essential Responsibilities & Duties Leadership & Mentorship Lead multi-disciplinary project teams in the execution of complex design/build/test projects, ensuring scope, schedule, and budget objectives are met. Act as a mentor and resource for junior engineers and designers, fostering technical growth and professional development. Technical Expertise Provide strategic technical leadership in mechanical design, collaborating with engineers, designers, and shop staff. Conduct design analysis and reviews to ensure compliance with applicable industry codes and standards (e.g., ASME B31.3, ASME B&PV, ASME AG-1). Develop and oversee test plans and procedures, supporting system testing and troubleshooting. Maintain configuration control of baseline drawings and documents while ensuring accuracy and quality of design deliverables. Project Collaboration & Fabrication Support Work closely with fabrication teams to ensure designs are manufacturable and optimized for production. Apply hands-on experience in fabrication processes to support design, manufacturability, and troubleshooting during production. Provide clear communication and updates to project stakeholders regarding task status, technical challenges, and progress. Support continuous improvement initiatives in design and fabrication processes to enhance efficiency and quality. Required Qualifications Bachelor's degree in Mechanical Engineering (ABET-accredited) or higher. Registered Professional Engineer (PE). Minimum of 15 years of demonstrated experience in mechanical engineering design. Proven experience leading and managing project teams across disciplines. Extensive experience preparing design deliverables, resolving technical review comments, and finalizing design packages. Strong attention to detail with ability to work collaboratively in a team environment. Self-motivated with a focus on project needs and delivery schedules. U.S. citizenship and ability to obtain government security clearance (required for federal contract work). Preferred Qualifications ASME NQA-1 or DOE project experience. Project management experience. Hands-on fabrication experience, with ability to provide design input to optimize manufacturability. Experience supporting projects at nuclear facilities or within Navy Nuclear Power systems. Willingness to embrace new challenges and contribute to team growth. Key Success Attributes Leader & Mentor: Guides technical teams and supports professional development. Technically Proficient: Deep understanding of mechanical design and industry codes/standards. Collaborative: Works effectively across engineering, design, and fabrication teams. Detail-Oriented: Ensures high-quality deliverables and compliance with requirements. Adaptable: Able to manage competing priorities in a dynamic project environment. Equal Opportunity Employer Columbia Energy is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, sexual orientation, gender identity, protected veteran status, or any other characteristic protected by federal and state law.

We have a client in the Tri-Cities, Washington area that is looking for an on-site, full-time Senior Mechanical Engineer to bring on long-term. If you or any of your colleagues are interested in this position, please click apply now. In this role you will be working with and familiarizing yourself with the company's sensor and test equipment products, which includes working with scientific equipment involving fluid measurement and gas reclamation systems among other industries. This position is a contract to possible permanent role that is a long-term need for the client. This role must be worked on-site. This company does not offer current or future sponsorship. Must be W2 under contract. Cannot be Corp-to-Corp or 1099. Pay: $60 - $75 / hr depending on experience and qualifications Qualifications: Bachelor's or Master's Degree in Mechanical Engineering PE license strongly preferred (or on the licensing pathway) Proficiency with SolidWorks, including extended features, PDM Understanding of Fluid Dynamics and flow analysis for mechanical systems Proficient with FEA and its application, ANSYS familiarity #VIS

Position Overview: J-U-B ENGINEERS, Inc. is seeking to hire a Professional Engineer - Lead - to work in our successful Kennewick office. Our purpose at J-U-B ENGINEERS, Inc. (J-U-B) is “Helping Each Other Create Better Communities.” We foster a supportive and team-oriented environment to solve problems that improve society, while providing employees growth opportunities and an expansive benefits package. We attract and retain the best people because we provide an enriching environment for our employees to build their careers in the communities where they live. J-U-B offers a clearly defined career path, a sense of belonging, and opportunities for employees to use their talents in a team environment. We are one of the largest professional engineering companies in the Intermountain West, with over 20 offices across 7 states. There are ample opportunities to collaborate with other offices on projects, widening your experience and network. The ideal candidate will play a critical role in supporting the growth of our traffic engineering group, which currently consists of 7 individuals ranging experience from 0 years to 30+ years. This group has consistently grown in its ability to capture and complete quality work and now needs additional engineering experts to grow the traffic engineering practice company wide. This position reports to the Technical Resources Lead within the Transportation Services Group (TSG). Technical Roles: Support the growth and development of the technical traffic practice companywide and function as a traffic engineering resource. Prepare traffic deliverables for local, state, private, and federally funded projects. Perform quality control/quality assurance for traffic engineering deliverables. Proficient in or desire to learn the following traffic software: Sidra Vissim Visum HCS Synchro OpenPaths (Cube) Vistro Proficient in or desire to learn: Travel Demand Modeling Signal and Corridor Timing Transportation Master Plans Traffic Impact Studies Maintenance of Traffic (MOT) Traffic Signal Design Illumination Signing and Striping Traffic Safety Analysis Noise Studies Intelligent Transportation Systems (ITS) Planning and Environmental Linkages (PEL) Traffic Group Role: Support strategic planning of traffic group operations. Mentor and support staff including EIT's and other transportation project engineers. Provide technical support and guidance on a variety of traffic projects. Manage workload and identify workload gaps. Collaborate with and support design engineers on transportation Projects. Business Development Role: Support business development pursuits under the direction of the Traffic Discipline Lead . Requirements Qualifications: The ideal candidate would possess: Bachelor's degree in civil engineering. Professional Engineer with ability to obtain licensure in Utah, Nevada, Idaho, Colorado, and Washington. 10-20 years of progressive traffic engineering experience. Proven ability to work with others and to manage project schedules and deliverables. Proven ability to work collaboratively in a team environment, supporting multiple offices and teams. Strong communication and writing skills. Salary Range: $120,000 - $145,000 per year, determined by experience. Benefits: In addition to your competitive salary, J-U-B also offers an extensive benefits package including: Professional development opportunities Bonuses for qualified employees Generous vacation and sick leave package Medical, dental, vision, life, and disability insurance Parental Leave 401(k) with company match, profit sharing Company paid Short Term and Long-Term Disability plans The ability to work in a team-centered, collaborative, and supportive atmosphere J-U-B is an employee-owned firm and offers ownership opportunities after qualified years of service. The application window will be open through December 23, 2025. Applications will be reviewed frequently, and interviews may be scheduled throughout the posting period. See our website for more benefit details: ***************************************** To apply for this position and learn more about J-U-B, please visit *********** Salary Description $120,000 - $145,000 per year DOE

Job Description An Air Quality Engineer II is responsible for carrying out the Agency's New Source Review Program for Minor and Air Operating Permit Sources as well as the Registration Program. They are responsible for assuring source compliance with all applicable rules and regulations. Work includes source identification, process and emission analysis, rule applicability, as well as development and application of pollution control strategies. Locates, inspects, and registers existing and potential air pollution sources and seeks compliance with all applicable rules and regulations. Develops and approves air permits for sources, along with various other duties which may include enforcement, education, reporting and record keeping associated with engineering responsibilities. As a registered Professional Engineer, perform professional environmental engineering duties in an assigned program involving the protection of public health and/or the protection or restoration of the environment. May assist or lead assigned engineers and/or other staff. Represents the agency as a registered Professional Engineer and provide/approve final engineering designs and decisions. DUTIES AND RESPONSIBILITIES •Serves as a registered Professional Engineer performing New Source Review investigations and analysis. Performs Notice of Construction permit writing and inspections for new sources of air pollutants within the Agency's jurisdiction. Performs engineering analysis of industrial and commercial processes and material flow to determine and control air pollutant emissions. Reviews and evaluates permits and permit applications to ensure compliance with current engineering requirements and local, state, and federal laws, regulations, and codes. •Ensures compliance with applicable federal, state, and local laws, regulations, and policies; prepares, recommends and/or coordinates enforce action (civil and criminal penalties, directives, or regulatory orders) against the regulated community based on a review of applicable engineering information; •Independently plans and/or conducts specialized comprehensive engineering inspections and/or studies of municipal and industrial environmental treatment facilities to ensure compliance with applicable laws, regulations and design/performance requirements; •Provides professional engineering expertise to the review and evaluation of proposal or existing environmental permits and permit applications; negotiates and prepares permits; makes final recommendations on enforcement actions; •Provides professional technical engineering assistance to agency staff and management, the regulated community, their consultants and the general public; •Interprets regulations, policies, technical engineering guidelines, and procedures covering design requirements, engineering review, and operation and maintenance requirements for environmental control or management facilities; •Prepares, reviews, and negotiates with applicable parties for environmental permits, regulatory orders and environmental plans and monitoring programs for assigned program(s); •Prepares and delivers engineering oriented presentations to professional groups and/or the public regarding department programs; serves as an expert witness in judicial proceedings and public hearings; •Conducts environmental reviews of existing, potential and proposed air pollution sources consistent with SEPA (State Environmental Policy Act) regulations. Reviews environmental checklists and environmental impact statements and other proposals for air quality impacts. •Manages source registration program that maintains current emission inventory and other information for existing air pollution sources. •Manages emission inventory program for the Agency. This includes assisting in annual maintenance of registration programs, fee schedules and input of emission inventory data into reporting systems required by local, state, and federal compliance agreements. •Assists in special studies, preparation of reports, and development of regulations and policies •Performs other work as required. Requirements ENVIRONMENTAL/PHYSICAL/MENTAL REQUIREMENTS An Air Quality Engineer II performs most of their responsibilities in direct contact with other members of the Agency, the public, and others in the air quality field. This individual must be able to move freely throughout our building, the business and residential community. They must also have basic accounting, administrative and clerical skills. Due to the level of authority and accountability involved, this individual must be able to make sound judgments, based on a clear assessment of the facts, looking at both long and short-term ramifications. An Air Quality Engineer II must be proficient at Microsoft Office, be able to read, examine for errors and comprehend materials and equipment ranging from specialized gauges and instruments to letters and memos to government regulations and be able to explain these materials to others who may not possess the same level of technical expertise. This individual must have excellent vision. Most work is performed in a quiet to moderately noisy environment, generally free of hazards. Local travel is sometimes involved. Must be able to complete Plume Evaluation Training. KNOWLEDGE AND ABILITIES •Knowledge of: principles and practices of environmental engineering and/or environmental sanitation; design, construction and operation of air quality control, water supply and treatment and sewage and industrial waste disposal systems; physical and biological sciences as related to environmental engineering; methods and procedures in establishing and administering an environmental program; laws and regulations governing environmental issues. •Ability to: evaluate technical environmental engineering data and computations; develop designs involving environmental engineering theory and judgment; plan, promote and administer environmental engineering projects; supervise and train others; establish and maintain cooperative working relationships with public officials and community groups; write engineering reports and proposed environmental legislation. QUALIFICATIONS Required: Registration as a Professional Engineer in the state of Washington as required by RCW 18.43. There may be instances where individual positions must have additional licenses or certification. It is the employer's responsibility to ensure the appropriate licenses/certifications are obtained for each position. Desirable: A Master's degree with major study in one of the following engineering fields: sanitary water resource, civil, geotechnical, environmental, chemical, mechanical, or related field AND Registration as a Professional Engineer in the state of Washington or another state based on registration requirements equivalent to those in Washington and two years of experience in environmental engineering OR An Engineer-In-Training Certificate or a Bachelor's degree with a major study in one of the following engineering fields: sanitary, civil, geotechnical, water resource, environmental, chemical, mechanical or related field AND Registration as a Professional Engineer in the state of Washington or another state based on registration requirements equivalent to those in Washington and three years of experience in environmental engineering. Skills The best person for the job will be an effective verbal and written communicator; able to organize multiple priorities; able to work with a wide variety of people (sometimes angry people); can meet deadlines and work well under pressure. The ability to work independently. A valid Washington State driver's license is required. Benefits Salary $94,296 - $117,245 Annually Insurance Benefits Employees and their families are covered by medical (including vision), dental and basic life insurance at no cost to the employee. Employees are covered by basic life and long-term disability insurance, with the option to purchase additional coverage amounts. Retirement and Deferred Compensation BCAA Employees are members of the Washington Public Employees' Retirement System (PERS). New employees have the option of two employer contributed retirement programs. Employees also have the ability to participate in the Deferred Compensation Program (DCP). This is a supplemental retirement savings program (similar to an IRA) that allows you control over the amount of pre-tax salary dollars you defer as well as the flexibility to choose between multiple investment options. Social Security All BCAA employees are covered by the federal Social Security and Medicare systems. The agency and the employee pay an equal amount into the system. Holidays Full-time employees are entitled to paid holidays and one paid personal holiday per calendar year. Sick Leave Full-time employees earn eight hours of sick leave per month. Vacation (Annual Leave) Full-time employees accrue vacation leave at the rates specified in the BCAA policy manual starting at a rate of eight hours of vacation leave per month and increasing based on the number of years of service.

A multidisciplinary firm providing services in civil and structural engineering, community planning, landscape architecture, and land surveying seeking a Civil Project Engineer to help them drive innovative site development projects in the Tri-Cities. Your expertise will shape residential, commercial, and warehouse developments, contributing to their dynamic growth. Your Day Includes Collaborating with clients, local agencies, subconsultants, and internal team members Preparing civil engineering designs and calculations for site development Working on local roads, storm water, grading, and drainage systems Designing sanitary sewer and water distribution systems for domestic and fire protection Utilizing AutoCAD and Civil 3D for project planning and execution Must Haves Bachelor of Science in Civil Engineering PE License 4-7 years of civil design experience Proficiency in AutoCAD, Civil 3D, and storm water modeling software (WWHM, MGS Flood) P.S. In addition to offering a comprehensive health, dental, and vision package, we also provide option of PPO health plan or HDHP with Health Savings Account (HSA) with company contribution as well as 8 company-paid holidays each calendar year. If you have the necessary qualifications and are excited about this opportunity, we encourage you to apply. We look forward to hearing from you. *Eligible for Blueprint Helpers referral program (find out more: blueprinthires.com/bphelpers)

We are seeking a Senior Project Engineer to join our Data Center Innovations group in Tri Cities, WA. This role is perfect for someone who enjoys developing and managing project plans, schedules, and scopes of work in a dynamic and fast-paced environment. You will be part of an established and diverse team where your impact will be immediate. We are looking for someone who thrives in a collaborative setting and is passionate about problem-solving and goal achievement. Responsibilities * Manage procurement, purchasing, and supply chain coordination. * Track project financials and support budget adherence. * Coordinate logistics and vendor communication to ensure timely material delivery. * Assist with RFIs, submittals, and schedule tracking using tools like P6 or MS Project. * Interpret shop drawings and support construction sequencing. * Collaborate with cross-functional teams to streamline workflows and improve efficiency. * Support project managers and field teams with technical documentation and reporting. Essential Skills * Bachelor's degree in Project Management, Engineering, or equivalent field experience. * 2-5 years of experience in construction or manufacturing environments. * Proficiency in Navisworks, Bluebeam, Excel, and scheduling tools (P6 or MS Project). * Strong understanding of construction processes, including steel, heavy equipment, and general sequencing. * Experience with purchasing coordination and material logistics. Additional Skills & Qualifications * Experience working with a major mechanical subcontractor, primarily with HVAC systems. * Familiarity with financial oversight on projects including budgeting, estimating, approving change orders, and cost tracking. * Accountability and teachability: Takes ownership, communicates proactively, and learns quickly. * Technical proficiency: Solid foundation in construction principles and tools. * Process-oriented: Thinks in systems and dependencies; enjoys solving coordination challenges. * Adaptability and resilience: Thrives in fast-paced environments and remains calm under pressure. * Efficiency-focused: Values progress and clarity over perfectionism. * Curiosity and innovation: Passionate about improving construction methods and workflows. Work Environment Work will be conducted at various project sites in Eastern WA, potentially including locations such as Umatilla, Quincy, and Boardman. You will be joining a fast-growing team with one of the largest mechanical contractors in the Pacific Northwest to support large data-center projects. We reserve the right to pay above or below the posted wage based on factors unrelated to sex, race, or any other protected classification. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. This temporary role may be eligible for the following: * Medical, dental & vision * 401(k)/Roth * Insurance (Basic/Supplemental Life & AD&D) * Short and long-term disability * Health & Dependent Care Spending Accounts (HSA & DCFSA) * Transportation benefits * Employee Assistance Program .Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract to Hire position based out of Pasco, WA. Pay and Benefits The pay range for this position is $40.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Pasco,WA. Application Deadline This position is anticipated to close on Dec 16, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Title: Project Engineer Reports to: VEST Engineering Manager Pay: Salary is based on experience and geographic location. Antigo, WI- $60,756.80-72,904.00 Idaho Falls, ID- $60,756.50-$72,904.00 Pasco, WA- $69,555.20-$83,470.40 Job Summary The VEST (Volm Engineered Solutions Team) Project Engineer provides plant design, systems integration, and solutions services to our current customers and new markets where growth opportunities have been identified. Supervisory Responsibilities N/A Essential Duties Gain expert level knowledge of product and application in fresh produce packaging equipment. Gather and document customer requirements through sales reps, customers, vendors, and other stakeholders. Travel to project sites to gather site and customer requirement information. Translate customer requirements into RFQs and specifications for third party vendors and Volm partners. Work closely with third party vendors and Volm partners to develop solutions to customers packaging equipment needs. Develop project proposals, pricing, and scope documents for customer quotes and contracts. Create accurate BOMs for sourcing department to procure equipment. Utilize design skills to creatively solve space restriction issues with third-party vendors and Volm partner equipment. Develop plant layouts integrating customer, third party vendor, and Volm partners CAD models. Create accurate installation drawings to allow Volm technicians to install equipment. Travel to project sites to assist installation team with engineering support. Manage equipment projects from concept to execution. Perform technical/product training for sales team members, technicians, and customers. Provide status of ongoing and future projects. Assist in the creation of engineering standards and best practices. Required Skills and Abilities Strong project management skills preferred. Proficient in Microsoft Office Suite of products. Strong spatial awareness. Proficiency in 2D and 3D CAD. Ability to read and interpret architectural, mechanical, and electrical blueprints. Solid understanding of basic electrical and mechanical control systems. Have a valid passport, or the ability to obtain one within 6 months of hire date. Strong communication skills, both verbal and written. Excellent problem-solving abilities and analytical thinking. Effective organizational skills with the ability to prioritize tasks and meet deadlines. Proven ability to work collaboratively in a team environment. Adaptability and flexibility to embrace change and learn new skills. Strong time management skills for efficient task allocation and meeting deadlines. Meticulous attention to detail in completing tasks and maintaining high-quality standards. Customer service orientation with a focus on understanding and addressing customer needs. Education and Experience Knowledge of engineering principles and technical competencies normally acquired by the completion of an Associate's degree or technical certification in engineering or a related technical field, and/or equivalent work experience. Experience in PLC programming preferred. Physical Requirements Ability to stand, walk, and move around for extended periods of time. Capability to lift and carry objects of various weights up to 50 pounds occasionally Proficiency in using hands, fingers, and arms for tasks such as typing and writing. Sufficient visual acuity to read documents and recognize details at close and distant ranges. Ability to hear and understand verbal communication. Flexibility to bend, stoop, and reach low or high objects. Ability to perform physically demanding tasks, such as lifting, pushing, pulling, or carrying heavy objects. Adaptability to work in varying environmental conditions, such as temperature extremes, noise, dust, or fumes, depending on the nature of the job. Willingness to adhere to safety protocols and wear protective gear, including helmets, goggles, gloves, and safety shoes, as required by the job. Company Culture & Values A Commitment to Our Purpose (COMMITTED PEOPLE) - Our mission is to serve and build up our customers, suppliers, communities, and each other, guided by the principles of our Lord Jesus Christ. The commitment to serving and building up is easily seen in those employees that exemplify this value. Without Our Customers We Are Nothing (CUSTOMER FIRST) - We realize that we are blessed to serve our customers and without them, our company does not exist. They rely on us for their success and that is a responsibility we cannot take lightly. Our focus must be on serving them with as seamless communication and access to products as possible. Kind, Humble and Positive (HUMBLE) - These positive traits do not mean being a doormat to others. But when a person is kind, humble and positive it comes through in their genuine caring for those around them. A Desire For “Expert” (EXPERTS) - Our people want to be seen as the experts in their specific roles. From how we convert a bag efficiently and with highest quality, to knowledge of the product portfolio, to desiring to know more about tax or human resource policy - the desire for “expert” drives us in each of our roles. Intentional Growth - Developing of Self and Others (PERSONAL GROWTH)- Times, tools, and customer expectations change. Our team members are interested in developing themselves and those around them. We know that a stronger team is one that makes our customers and our fellow employees happier. Strong Work Ethic (HARD WORKERS) - The commitment to serve those around us is honorable and we respond to this by putting our strongest effort into that purpose. High Expectations of Self and Others (HIGH EXPECTATIONS) - We expect ourselves, and those around us, to put in our best effort. When others struggle, we help them align towards perfection. When we struggle, we are open and humble to hear it and course-correct accordingly. If It Isn't Safe, We Don't Do It (SAFETY) - All people deserve to return home to their loved ones safely and work in an environment where they can best execute their tasks safely. When choosing between safety and profit, safety and efficiency, safety and feelings, safety, and “x” - we choose safety. Travel Requirements This position requires routine overnight travel and routine travel within the workday. Overnight travel is expected once a month or every other month. The duration of each trip will vary based on the travel location. The ability to drive a company owned/leased vehicle or personal vehicle on behalf of the company is required. Inclusion in the company's driver qualification program is required to drive a company owned/leased vehicle or personal vehicle. Becoming a qualified driver includes: Agree to the company driving policies that apply to company owned/leased vehicle or personal vehicle as applicable. Possess and maintain a valid driver license and be a minimum of 21 years of age. Maintain an acceptable driving record, as evidenced by completion of a baseline motor vehicle record check and ongoing monitoring. When driving a personal vehicle on behalf of the company, must provide a copy of the declaration page from personal auto insurance that shows the policy dates and minimum coverage amounts ($300,000 bodily injury per accident/$100,000 property damage per accident or if driving less than 5 hours/200 miles a year $50,000 bodily injury per accident/$10,000 property damage per accident or the state minimum, whichever is more). This requirement is initially and then annually thereafter. Benefits: As a family-owned and operated company, we offer a comprehensive benefits package designed to support you and your family. We offer a strong foundation of benefits, including access to medical, dental, and vision coverage, an HSA employer contribution, and a 401k with profit sharing to secure your future. To support your overall well-being and family life, we offer additional benefits beyond the core package, such as paid vacation, wellness stipends, childcare reimbursement assistance, and much more. We are committed to continuously enhancing our benefits to meet the evolving needs of our team. This job description is intended as a general outline of the primary responsibilities of the position. It is not intended to be an exhaustive or comprehensive list of all duties, responsibilities, or activities that may be required. The employer reserves the right to modify, add, or remove any responsibilities, duties, or activities as deemed necessary with or without notice. Volm Companies is an equal opportunity employer and is committed to providing reasonable accommodation to qualified individuals with disabilities and other protected characteristics. If you require reasonable accommodation to perform the essential functions of the job, please inform us and we will work with you to address your needs.

The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy-all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News Field Robotics Engineer As a Field Robotics Engineer at Carbon Robotics you are responsible for ensuring customer success via successful implementation and support of Carbon Robotics Equipment. You'll be responsible for owning, scheduling, and prioritizing maintenance tasks on the LaserWeeders as well as owning and ensuring successful implementations. This includes training of operators, making usage recommendations based on agronomic knowledge and implementing set up. You will also act as a liaison to engineering and product departments by communicating customer wishes and complaints, equipment performance and pain points or bottlenecks. Essential Duties and Responsibilities: The training of operators and all farm personnel required to successfully implement the use of Carbon Robotics equipment to growers. Serve as the lead point of contact for assigned accounts. The ability to learn and teach every facet of usage of equipment, from transportation, maintenance to field utilization and operation. To schedule, coordinate and prioritize bi-weekly maintenance tasks on Slayers in collaboration with the support team. Ownership of quality of work and PM scheduling Report immediately to Support and Ops Management teams any event, condition, or circumstance that could injure another employee, damage Carbon Robotics equipment, reduce customer confidence, impair service, etc. Make recommendations to improve support processes. Make recommendations to improve Slayer reliability. Troubleshoot and report weeding quality issues in collaboration with support Measures of Performance: Maintains positive working relations with all support stakeholders. Plans, organizes, schedules and supervises work activities. Develops knowledge of Slayer and all associated systems. Maintenance tasks are performed at a high level and maintained in accordance with support, product and engineering teams. Attends and participates in meetings related to support and Slayer performance. Enhances the image and reputation of Carbon Robotics by ensuring FST teams have necessary resources to execute tasks at a high level. Provides high quality training to incoming FST's Skills & Abilities: Strong understanding of electrical and mechanical systems. Ability to read and interpret electrical diagrams. Ability to clearly communicate over different platforms with a large set of stakeholders Requires the ability to manage multiple projects, and the ability to solve an array of technical, personnel, and customer related problems. Ability to clearly document issues and processes Qualifications and Experience: 5+ years experience in agriculture working with growers and farming equipment desired Sales acumen with ability to deliver compelling demonstrations and address technical questions from prospective growers about our products to facilitate a sale Excellent people skills that allow you to develop rapport and build trust with growers and dealers Mechanically inclined; Able to troubleshoot and fix problems with Carbon Robotics Laser Weeding equipment Computer literate and capable of installing and updating software, uploading logs and tagging images Flexible and adaptable; effective in a startup environment with limited resources Comfortable driving a truck and trailer to transport equipment to grower fields for demos and deliveries Travel Required at 50 percent plus Carbon Robotics follows equitable hiring practices. Flexibility in our hiring process allows hiring of talent at levels different from what are posted. The compensation range outlined is based on a target budgeted base salary. Individual base pay depends on various factors such as relevant experience and skill, Interview assessments and responsibility of role, job duties/requirements. Offers are determined using our equitable hiring practices. Carbon Robotics offers additional compensation in the form of benefits premiums, pre-IPO stock options and On Target Earning commissions for appropriate positions. Base pay ranges are reviewed each year. We are committed to the principle of pay equity - paying employees equitably for similar work.Carbon Robotics' base salary pay range:$82,000-$105,000 USD Why would you join Carbon Robotics? Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: Competitive salaries Pre-IPO Stock Options Generous Benefits: Fully-paid medical, dental, and vision insurance premiums for you and all dependents Choice of PPO or HDHP/HSA Virtual Care - Doctor on Demand Employee Assistance Program Mental Health HRA Restricted Healthcare Travel support Menopause Support Life Insurance Long Term Disability Flexible PTO 401(k) plan Pet Insurance Commuter Benefits Work Culture: Be a part of an inclusive and tight-knit company culture that values innovation and mission-driven success. *Internationally based employees benefits varies & Contractors are not eligible for Carbon Robotics Benefits or Stock Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

FIRST REVIEW AFTER TWO WEEKS: 11/3/2025 CORE VALUE STATEMENT The City of Kennewick will provide excellent public service and ensure the safety and wellbeing of our community and one another through the empowerment of each employee. We value integrity, inclusiveness, stewardship, and communication. We are accountable to our community for innovative and collaborative efforts that anticipate needs, leverage resources, and deliver solutions. SAFETY STATEMENT We expect our employees to ensure compliance with all applicable safety practices and policies, including those established by OSHA/DOSH regulations and by the City's Accident Prevention Plan. This includes but is not limited to actively identifying and correcting potential hazards that may affect employee and public safety, including those identified by co-workers. Leading by example to promote a positive culture of workplace safety through everyday action; emphasizing safe completion of work throughout all aspects of developing and carrying out work plans. CLASSIFICATION SUMMARY Responsibility for the management and oversight of consultant design services of water, sewer and drainage facilities including all construction inspections and construction contract administration activities related directly to water and sewer infrastructure improvements for the Water & Sewer Services Division of the Public Works Department. Coordinates with the Operations and Maintenance staff to develop and implement the Capital Improvement Plan and make revisions as priorities and changes are needed. The position may also be assigned responsibilities for assuming day to day management of the maintenance and operations work groups in the absence of the Utility Services Manager. This is a single position classification. It is not part of a series. Examples of Work Performed (Illustrative Only) The following list reflects the essential job duties and responsibilities of this classification, but should not be considered all-inclusive. The incumbent will be expected to perform other related duties as assigned. * Directs, supervises and manages the activities of the design and construction of water, sewer and drainage infrastructure for the Public Works Department, including design, surveying and right-of-way acquisition activities; * The incumbent must establish and maintain cooperative working relationships with consulting engineers, designers, contractors, Federal, State and local agency representatives, property owners, utility companies, the general public and other City employees. * Responsibility for the management and oversight of consultant design services of water, sewer and drainage facilities for the Water & Sewer Services Division of the Public Works Department, including all design, survey and right-of-way activities performed for utility infrastructure projects in the City. Such as: water and sewer infrastructure, including water and wastewater plant upgrades; reservoir and booster station construction; wastewater lift stations; water and sewer trunk lines, and drainage facilities. * Develops and monitors goals and objectives to efficiently accomplish assigned tasks and responsibilities of the design and construction of water, sewer and drainage infrastructure; * Develops cost estimates for Department projects and funding applications; * Reviews the work of subordinates and consultants to ensure conformance with sound engineering practices, and all applicable environmental and Federal, State and City standards and regulations; * Approves and stamps design documents and specifications prepared under his/her supervision; * Represents the Public Works Department before citizens, interest groups and federal/state/local governmental agencies; * Assures that concerns and complaints from the public and others are adequately and timely addressed; analyzes solutions for problems and challenges and recommends corrective action, as needed; * Develops proposals and oversees the selection, negotiation and administration of consulting engineering agreements; * Assists in the preparation of the updates for the Water/Sewer Capital Improvement Plan, Water System Comprehensive Plan, General Sewer Plan and Wastewater Treatment Plant Facility Plan, and the Comprehensive Stormwater Plan; * Assist in preparation of and monitors the Utility Services Division Capital Improvement budget; * Coordinates activities with other City departments; * Prepares reports and presentations for the Department, City Council and other agencies; * Supervises development of and revisions to City engineering standards and specifications; * Acts as a mentor and technical resource for subordinate supervisors and staff; * Provides for training and development of subordinate supervisors and staff; * Conducts performance evaluations, administers discipline; participates in the hiring, termination and pay change recommendations of Section staff; * Oversees the maintenance of office records, maps, construction project documents and related records, including as-built record drawings of all public and private development work. Employment Standards MINIMUM QUALIFICATIONS Extensive managerial experience and background in the civil engineering principles specifically related to water sewer and drainage design, construction, maintenance and repair. This position requires a Bachelor's Degree in civil engineering or a closely related field and a minimum of three years of experience administering municipal engineering projects, including a minimum of one years of supervisory experience, or any combination of relevant education and experience sufficient to demonstrate the knowledge, skills and abilities to perform the duties listed above. * Engineer-in-Training (EIT) certification required. * Professional Engineer (PE) license preferred. * Must pass a criminal background investigation. * Must maintain regular attendance and punctuality. * Must maintain a level of mental and physical fitness required to perform the essential functions of this classification. Supplemental Requirements Comprehensive Knowledge of: * Principles and practices of civil engineering, particularly as they relate specifically to the design, rehabilitation, construction, inspection, and repair of water, sewer and drainage facilities; * Municipal public works planning, design and administration; * Contract management and administration. Considerable Knowledge of: * Management practices and procedures; * Supervisory practices and techniques; * Project planning and project management principles and practices; * Accounting and financial management; * Federal, State and environmental rules, regulations and procedures. Ability to: * Make clear and concise presentations at formal meetings such as Commission and City Council meetings; * Plan, organize and direct the work of subordinates; * Plan, organize and direct engineering programs and projects; * Communicate effectively orally and in writing; * Operate a computer and be familiar with computer-aided-design and drafting and related business software.

Full-time Description We are seeking a skilled and motivated Equipment & Facilities Engineer to support and improve production operations in a regulated medical device manufacturing environment. This role is responsible for maintaining and enhancing equipment performance, ensuring facility readiness and compliance, and driving continuous improvement in alignment with FDA, ISO 13485, and cGMP standards. Job Duties/Responsibilities Manufacturing Equipment Support: Manage preventive and corrective maintenance programs for critical manufacturing equipment and infrastructure. Partner with Quality and Regulatory teams to ensure compliance with validation protocols and risk assessments. Troubleshoot mechanical, electrical, pneumatic, and automated systems to minimize downtime. Document changes and maintain equipment-related records per internal quality systems. Facilities Engineering: Oversee maintenance and operation of facility infrastructure including cleanrooms, HVAC, water systems, and critical utilities. Support cleanroom compliance, including ISO Class 7/8 areas. Support facility expansions, layout changes, and utility upgrades to accommodate production growth. Ensure EHS and OSHA compliance for facility operations and equipment installations. Manage external contractors and vendors for facility and equipment projects. Assist in root cause analysis and resolution of equipment-related nonconformances and deviations. Support audits and inspections by providing facility and equipment documentation and technical expertise. Monitor and analyze equipment performance data to identify trends and drive continuous improvement. Ensure compliance with applicable building codes, safety regulations, and environmental standards. Coordinate with external contractors and vendors for facility and equipment projects. Comply with Company policies and procedures. Authorized to access employee and/or patient PHI and ePHI only as needed for job-related functions. Other duties as assigned. Requirements Required Qualifications: Bachelor's Degree in Mechanical Engineering or related field or combination of education and experience totaling 8 years. Hands-on experience with electromechanical equipment, automation systems, and utilities used in production environments. Ability to train team members in preventative maintenance and calibration of equipment. Ability to define problems, collect data, establish facts, and draw valid conclusions. Excellent written and verbal communication skills. Strong analytical and project management skills with the ability to manage multiple priorities. Proficient in using Microsoft office programs (Outlook, Word, Excel, and PowerPoint). Willingness to work a flexible schedule. Able to travel for work as needed. Satisfactorily pass comprehensive background screening. Satisfactorily pass drug screening (if applicable to position). Preferred Qualifications: Experience supporting Class I, II, or III medical devices. Six Sigma or Lean Manufacturing certification. Knowledge of PLC systems. Familiarity with root cause analysis (e.g., 5 Whys, Fishbone, FMEA). Experience working with and around radioactive materials Experience supporting a functioning class 7 cleanroom Physical Demands/Working Conditions: On-site role in a manufacturing environment. May require entry into controlled environments (ISO Class 7/8 cleanrooms). Occasional off-hours work to support facility or equipment projects. Frequent exposure to hazardous materials requiring appropriate PPE and precautions when working with hazardous materials and chemicals. Requires frequent finite hand/eye coordination. Frequently picks up, carries, and moves items up to 50 lbs. Some evening and weekend work depending upon workload. Some overnight travel may be required for work, events, and trainings. Salary Description $90,000 - $160,000 per year

Job Description Fiber Optic Network Design Engineer Joining Blue Mountain Networks means becoming part of an Oregon-based company dedicated to innovation, teamwork, and community engagement. While we deliver high-speed internet, our primary focus is providing an exceptional customer experience that distinguishes us in the industry. We foster a collaborative environment where your ideas are valued, your career can grow, and your work makes a meaningful impact on the communities we serve. The Fiber Optic Network Design Engineer is responsible for planning, designing, and documenting outside-plant (OSP) fiber networks that support residential, commercial, transport, and middle-mile connectivity. This role develops end-to-end designs from conceptual routes through construction-ready packages, ensures accuracy and regulatory compliance, and contributes to documenting and improving existing plant. The position requires time in the field verifying conditions, inspecting undocumented routes, and resolving discrepancies, while also working with other field and staking resources. Key Responsibilities include: Network Planning and Design Design backbone, distribution, and access networks including GPON and XGS-PON. Produce construction drawings, splice plans, fiber allocation tables, and bills of material. Complete design work, updates, and as-builts in Vetro FiberMap. Evaluate route options and construction feasibility using both field observations and desktop research. Documentation and Permitting Prepare permit drawings, make-ready documentation through NJUNS, and construction packages. Ensure compliance with NESC, utility pole attachment standards, and local permitting requirements. Maintain accurate records by updating Vetro with as-builts, design revisions, and existing plant corrections. Prepare splicing documentation and fiber management records for construction and operations teams. Managing NJUNS tickets to address violations, pole transfers, and permitting activity Updating records with As-built information Field Verification and Existing Plant Documentation Spend time in the field verifying route conditions, pole lines, underground paths, and areas with undocumented or incomplete plant. Coordinate with field and staking teams for large-scale audits or when multiple routes must be documented quickly. Review field audit results and reconcile them with existing records. Capture GPS points, measurements, photos, and notes directly when needed to support design accuracy. Assist with feasibility assessments, make-ready evaluations, and construction validation. Collaboration Work with OSP engineers, construction leads, splicing teams, and network engineering. Coordinate with utilities, municipalities, pole owners, and permitting agencies. Provide design clarification and technical support to construction crews during installation, splicing, and testing. Communicate route changes, field discoveries, and design impacts to project stakeholders. Quality Assurance Review designs for constructability and compliance with engineering and regulatory standards. Support redesign efforts when actual field conditions differ from planned routes. Validate construction work against design intent and record variances in Vetro. Assist in improving design standards, templates, and workflows. Skills and Qualifications Strong knowledge of fiber optic systems, OSP construction practices, and PON or transport network architecture. Experience with GIS tools, particularly Vetro FiberMap. AutoCAD or similar tools are helpful. Understanding of permitting, NESC requirements, pole attachments, make-ready processes, and joint-use systems. Experience with NJUNS is preferred. Strong analytical, organizational, and communication abilities. A degree in Telecommunications, Electrical Engineering, Engineering Technology, Civil Engineering, or related fields is desirable, but candidates with demonstrated OSP design experience will be given consideration Industry certifications such as FOA CFOT, CFOS/D, FBA OSP or OTS, or BICSI OSP are a plus. Work Environment Combination of office-based design work and field visits. Field work will include walking routes, inspecting poles and underground paths, validating undocumented areas, and capturing field data. Additional coordination with field or staking resources will supplement on-site work when appropriate. Travel throughout Oregon and Washington service area is required. The Fiber Optic Design Engineer reports to the CTO and will be involved in strategic planning related to expansion plans and Grant opportunities. Location: This role is based out of one of our offices located in Hermiston or Hood River, OR Salary: $70,000 - $90,000 annually Benefits: Employer sponsored 401(k) with matching contributions Employer provided Health insurance. Optional Vision, Dental Insurance Paid time off and Holidays Education reimbursements

Why Start Your Mechanical Engineering Career at ENERCON Services? At ENERCON, you won't just be starting a job, you'll be launching a meaningful engineering career. As a new graduate Mechanical Engineer, you'll join a collaborative, forward-thinking team that's shaping the future of power generation. From day one, you'll work on real projects that matter; designing and evaluating systems that power critical facilities, including those in the nuclear sector. You'll gain hands-on experience, learn from industry experts, and grow your technical and professional skills in a supportive environment. With opportunities to visit client sites, contribute to cross-disciplinary solutions, and take ownership of your work, you'll see the direct impact of your contributions. If you're looking for a place to grow, innovate, and make a difference, ENERCON is where your engineering journey begins. Why work for ENERCON? At ENERCON, we are more than just an engineering and environmental services firm - we are pioneers of innovation, driving efficiency and sustainability in the energy, power, and technology industries. Our vibrant culture is shaped by our unwavering commitment to excellence and our dedication to fostering a workplace where creativity and collaboration thrive. When you join ENERCON, you become part of a dynamic team dedicated to making a real impact. We invest in our employees' growth and development, empowering them to shape the future of the industries we serve. Join us, and together, let's create a sustainable, efficient, and innovative tomorrow. What divisions could you work for? Nuclear Services Group (NSG) ENERCON Federal Services (EFS) Data Center Mission Critical (DC) Energy Group (EG) What will be expected of our new graduates? As a new graduate at ENERCON, you will be expected to actively engage in various tasks and responsibilities crucial to the success of our projects. You will be tasked with learning and applying codes and standards for designing projects, being organized and efficient, having a positive attitude towards learning and feedback, collaborating with senior engineers for field data collection, and adapting to new software systems. It's important to ask questions, use available resources, and connect classroom knowledge with practical industry work. Meeting deadlines and managing multiple tasks simultaneously are critical aspects of your role. Preferred engineering majors or disciplines we hire? Mechanical Engineering Nuclear Engineering What offices are we hiring for? Kennesaw, GA Naperville, IL Overland Park, KS Chattanooga, TN Dallas, TX Fort Worth, TX Kennewick, WA San Luis Obispo, CA Palm Beach Gardens, FL Tampa, FL Phoenix, AZ What do we offer our new graduates? Exciting Challenges: Dive into a world of cutting-edge projects that challenge your skills and expand your horizons. Innovative Environment: Work in an atmosphere that nurtures creativity, encourages out-of-the-box thinking, and supports your professional development. Collaborative Culture: Join a team of experts who collaborate, inspire, and empower each other to achieve remarkable results. Growth Opportunities: Embark on a rewarding career path with endless opportunities for growth and advancement. Contribute Meaningfully: Be part of a company that values your ideas, expertise, and dedication to making a difference. What are skills that would be helpful to your success as a new graduate? Graduated with a bachelor's or master's degree from an ABET- accredited school in one of our listed preferred majors. Available to start between May 2026 and August 2026. Graduating May-June 2026 preferred. Preferred Courses: Thermodynamics, Fluid Mechanics, Heat Transfer, Material Science, and Statics. A solid working foundation with your major's core concepts. Proficient in Microsoft Suite. Excellent writing, presentation, and communication skills. Ability to be an individual contributor and work effectively in teams. Ability to effectively problem solve. Must be able to climb stairs and ladders at client sites. Must be able to effectively navigate client sites to conduct walkdowns. Must be able to work outside. Ability and willingness to travel for client and company projects and/or meetings. Please note: Some roles may involve work on federal contracts that require employees to be citizens of the United States. For those specific positions, only applicants who can confirm their status as U.S. citizens will be considered. Interview and Employment Requirements: Completion of pre interview assessments. College transcript submitted for anyone under 1 year of experience post-graduation. Ability to pass pre-employment and random drug and alcohol screenings, ENERCON and client-specific background checks, and annual motor vehicle record (MVR) checks according to company and client policies. ENERCON does not provide sponsorship now or in the future. Salary Range: The salary range for this full-time position is $71,000.00- $85,00.00. Salary ranges are determined by a combination of role, level, experience, and location. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Please note that this job posting is subject to change at any time. #LI-MA2 #LI-Onsite Additional Information About ENERCON: At Enercon Services, Inc. (ENERCON), we're driven by our people-and we're proud to offer rewarding careers in a culture of excellence. We provide a comprehensive benefits package and professional development opportunities that support your long-term growth. What We Offer: Enjoy full benefits for you and your dependents starting day one, no waiting period Flexible work arrangements, including hybrid and alternative schedules 401(k) with employer matching Tuition reimbursement Professional Engineer (PE) license support and incentives Want to see the full picture? Click HERE to see our Comprehensive Benefits Salary Range Information: If a salary range is listed, it reflects the typical range for this full-time position based on the role, level, and location. Individual compensation within the range will be determined by factors such as work location, relevant experience, job-related skills, and education or training. Eligibility to Work: Candidates must be legally eligible to work in the US without requiring current or future sponsorship. Ability to pass a pre-employment and random drug and alcohol screenings, ENERCON and client specific background checks, and annual motor vehicle record (MVR) according to company and client policies. Equal Opportunity Employer: ENERCON does not discriminate in employment opportunities or practices based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. Connect with Us: *************** | LinkedIn

Principal Mechanical Engineer Company: Columbia Energy & Environmental Services Salary: $120,000 $180,000 DOE Columbia Energy & Environmental Services, headquartered in Richland, WA, is a well-established small business with a strong track record of delivering comprehensive solutions in engineering, design, fabrication, instrumentation and controls, and other specialized services. With expertise in fixed-price design/build/test projects, we serve both federal and commercial clients, consistently delivering high-quality results through innovation and technical precision. Our collaborative and experienced team is committed to providing practical, client-focused solutions tailored to address a wide range of challenges. Recently, we expanded our operations to Idaho Falls, ID, reflecting our ongoing growth and dedication to broadening our capabilities. We take pride in maintaining a strong reputation for quality and integrity while ensuring compliance with rigorous industry standards. Why Join Columbia Energy? At Columbia Energy, we foster a supportive and innovative environment where team members can thrive. As a growing small business with ambitious goals, we value initiative, teamwork, and a dedication to quality. This role offers the opportunity to lead impactful projects, serve as a mentor to junior engineers, and play a key role in advancing our technical capabilities. Veterans are strongly encouraged to apply. Position Overview We are seeking an accomplished Principal Mechanical Engineer to join our team in Richland, WA. This role provides opportunities to serve as a technical lead, project engineer, and mentor to project teams while contributing to complex design/build/test projects. The successful candidate will bring a combination of deep technical expertise, leadership ability, and a collaborative mindset to drive innovative solutions for nuclear and hazardous waste remediation, chemical processing, and nuclear ventilation systems. Essential Responsibilities & Duties Leadership & Mentorship Lead multi-disciplinary project teams in the execution of complex design/build/test projects, ensuring scope, schedule, and budget objectives are met. Act as a mentor and resource for junior engineers and designers, fostering technical growth and professional development. Technical Expertise Provide strategic technical leadership in mechanical design, collaborating with engineers, designers, and shop staff. Conduct design analysis and reviews to ensure compliance with applicable industry codes and standards (e.g., ASME B31.3, ASME B&PV, ASME AG-1). Develop and oversee test plans and procedures, supporting system testing and troubleshooting. Maintain configuration control of baseline drawings and documents while ensuring accuracy and quality of design deliverables. Project Collaboration & Fabrication Support Work closely with fabrication teams to ensure designs are manufacturable and optimized for production. Apply hands-on experience in fabrication processes to support design, manufacturability, and troubleshooting during production. Provide clear communication and updates to project stakeholders regarding task status, technical challenges, and progress. Support continuous improvement initiatives in design and fabrication processes to enhance efficiency and quality. Required Qualifications Bachelors degree in Mechanical Engineering (ABET-accredited) or higher. Registered Professional Engineer (PE). Minimum of 15 years of demonstrated experience in mechanical engineering design. Proven experience leading and managing project teams across disciplines. Extensive experience preparing design deliverables, resolving technical review comments, and finalizing design packages. Strong attention to detail with ability to work collaboratively in a team environment. Self-motivated with a focus on project needs and delivery schedules. U.S. citizenship and ability to obtain government security clearance (required for federal contract work). Preferred Qualifications ASME NQA-1 or DOE project experience. Project management experience. Hands-on fabrication experience, with ability to provide design input to optimize manufacturability. Experience supporting projects at nuclear facilities or within Navy Nuclear Power systems. Willingness to embrace new challenges and contribute to team growth. Key Success Attributes Leader & Mentor: Guides technical teams and supports professional development. Technically Proficient: Deep understanding of mechanical design and industry codes/standards. Collaborative: Works effectively across engineering, design, and fabrication teams. Detail-Oriented: Ensures high-quality deliverables and compliance with requirements. Adaptable: Able to manage competing priorities in a dynamic project environment. Equal Opportunity Employer Columbia Energy is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, sexual orientation, gender identity, protected veteran status, or any other characteristic protected by federal and state law.

Join ENERCON as a Project Engineer supporting civil structural projects for our Nuclear Services Group. Your role will involve developing winning engineering proposals with technical staff, executing projects within budget and schedule constraints, and maintaining robust client relationships. With your proven management skills, you'll oversee project schedules, financials, and reporting while actively supporting marketing endeavors to propel business growth. If you have 5 years of nuclear work as an engineer or a project manager and are ready to drive success, we encourage you to read more about this exciting opportunity. This role can sit out of any of our nuclear office locations, including but not limited to: Chattanooga, TN Spring City, TN Kennesaw, GA (Suburb of Atlanta) Baton Rouge, LA Overland Park, KS Birmingham, AL Athens, AL Naperville, IL King of Prussia, PA Glendale, CA Harrisburg, PA Remote will be considered for candidates that are senior and above Responsibilities A typical day in this role will include leading strategic project discussions, aligning your team to ensure quality and deadlines are met, while keeping clients informed and engaged. You'll dive into problem-solving, manage budgets, refine proposals, and identify new opportunities - all while motivating your team to turn every challenge into a win. Leadership & Coordination: Provide interdisciplinary coordination for design engineering projects and serve as a technical leader to ensure the project solution and quality goals are met. Manage client interactions and negotiate/control project scope to client and company's satisfaction. Foster and maintain working relations with assigned clients and act as a single point of contact for assigned projects Project Management Excellence: Plan, execute, and finalize projects according to established schedule and within budget. Understand project schedules, project management plans, and manage project staff to ensure project requirements are met. Formulate/develop detailed project reports. Understand project financials and be able to report regularly to management on financial status and overall project performance Strategic Growth & Innovation: Work with technical staff to develop winning, highly technical engineering proposals. Aggressively support marketing efforts, including identification of new opportunities, proposal preparation, and follow-up Qualifications Design Engineering experience with the modification and implementation process, calculations, specifications, etc. in power facilities Minimum of 6 years' experience in the nuclear or power industries as an Engineer or Project Manager Bachelor's Degree in Civil or Structural Engineering OR PMP Certification and 8 years' applicable experience PE license strongly preferred Ability to understand and work with budget and accounting processes Excellent organizational, time management, strategic planning, writing, communication, decision-making, and presentation skills Effective communication skills with demonstrated ability to work across disciplines and teams Working knowledge of MS Word, Excel, and PowerPoint Ability to gain and maintain unescorted access at nuclear sites Ability to travel between 10-15% of the time; duration of travel may vary depending on project and client needs, ranging from a few days to a few weeks #LI-SH7 Pay Range USD $90,000.00 - USD $175,000.00 /Yr. Additional Information About ENERCON: At Enercon Services, Inc. (ENERCON), we're driven by our people-and we're proud to offer rewarding careers in a culture of excellence. We provide a comprehensive benefits package and professional development opportunities that support your long-term growth. What We Offer: Enjoy full benefits for you and your dependents starting day one, no waiting period Flexible work arrangements, including hybrid and alternative schedules 401(k) with employer matching Tuition reimbursement Professional Engineer (PE) license support and incentives Want to see the full picture? Click HERE to see our Comprehensive Benefits Salary Range Information: If a salary range is listed, it reflects the typical range for this full-time position based on the role, level, and location. Individual compensation within the range will be determined by factors such as work location, relevant experience, job-related skills, and education or training. Eligibility to Work: Candidates must be legally eligible to work in the US without requiring current or future sponsorship. Ability to pass a pre-employment and random drug and alcohol screenings, ENERCON and client specific background checks, and annual motor vehicle record (MVR) according to company and client policies. Equal Opportunity Employer: ENERCON does not discriminate in employment opportunities or practices based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. Connect with Us: *************** | LinkedIn