Design engineer jobs in Saint Charles, MO

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company has an exciting opportunity for a Senior Electronic Systems Design, Analysis, and Test Engineer for Fighters programs located in Berkeley, MO. These programs include: F/A-18, EA-18G, F-15, F-22 - production tactical fighter aircraft ongoing major upgrades At Boeing, our Electrical Engineers develop and test electronic and electrical system requirements using analytical and technical skills, translate requirements into system architectures and modify hardware and software designs for Boeing aircraft, unmanned vehicles and much more. As a member of the team, you will lead the development and execution of new Mission Computing solutions for Fighters programs. Upon successful design of an architecture that meets all system requirements, this individual will lead the engineering team in its implementation and maintenance of that design through the development, lab test and flight test phases of the development cycle. Position Responsibilities: Leads activities to develop, document and maintain avionics architectures, requirements, algorithms, interfaces and designs. Serves as a subject matter expert for system level architecture, system-specific issues, and processes Leads the engineering team in implementation of Open Mission Systems (OMS) and Model Based Systems Engineering (MBSE) tools and processes Works with specialty engineering teams to decompose requirements to the Mission Computer to ensure performance, safety critical, and environmental requirements are understood and implemented. Works with internal and external stakeholders to coordinate execution of ongoing hardware-software integration efforts in a fast-paced Agile environment Works with customers and aircrew to develop and document complex electronic and electrical system requirements. Receives customer requests and analyzes them with consideration for contractual and technical impacts and translates into actionable system requirements Provides technical leadership for investigation of emerging technologies, technical planning and integration of new technology implementation, and technology demonstrations Resolves product integration issues and production anomalies Solves problems concerning fielded hardware and software over the entire product lifecycle Assists in monitoring supplier performance to ensure system integration and compliance with defined requirements Supports subsystem and system level compliance evaluations against the configuration item's requirement set Potential signing bonus for eligible/qualified external candidates. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, chemistry, physics, mathematics, data science, or computer science. Experience in Open Mission Systems (OMS) development Experience in Model Based System Engineering (MBSE) development Experience with system design and development, including component interactions, interfaces, and overall system functionality. Experience with requirements development and management, including technical performance specification and statement of work development. Preferred Qualifications (Desired Skills/Experience): Familiarity with Universal Command and Control Interface (UCI) message standard and Common Abstraction Layer (CAL) Experience with hardware design and development, encompassing all phases of the product lifecycle from initial design to flight maturity. Experience with hardware-in-the-loop (HIL) simulations and testing methodologies to verify system functionality Experience with designing secure architectures, implementing cryptographic protocols, secure boot processes, firmware validation, and secure communications. Experience with Open Architecture Standards: Familiarity with standards like SOSA (Sensor Open Systems Architecture), which leverages VPX standards. Experience with high-speed fiber connections (>10GB/s) Experience with safety and airworthiness certifications associated with DO-178C (DAL), MIL-STD-882E (LOR), or AC-17-01 (CSIL) Experience with ARINC-818 standard for use on display interfaces Experience with Multi-level Security Networks Experience with Multi-level Security Embedded Systems Experience with Cryptographic units, Cross Domain Solutions/Guards including access CDS and transfer CDS Typical Education/Experience: Level 3: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Level 4: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Shift: This position is for 1st shift At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: Level 3: $96,050 - $129,950 Level 4: $119,850 - $162,150 The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Applications for this position will be accepted until Dec. 31, 2025 Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

We're Hiring: Senior Mechanical Engineer (Design-Build Focus) We're a nationally recognized engineering and design firm looking for a Senior Mechanical Engineer to join our growing team. Our approach is different-we start with the end in mind and challenge conventional thinking to deliver the best value and best design for every project. We take the time to understand our clients' goals, operations, and long-term needs, balancing first cost, operational cost, and life cycle value. We serve Fortune 500 clients across the Institutional, Commercial, and Industrial markets, and there's no project we can't tackle. With multiple regional offices and a strong reputation in the industry, we're proud to be one of the largest engineering/design firms by revenue in our region. This position is based in Granite City, IL, and offers the opportunity to collaborate with talented professionals across our network. What You'll Do Lead mechanical design and implementation projects, ensuring we meet timelines, budgets, and quality standards. Design and specify mechanical systems with a focus on energy efficiency, cost-effectiveness, and compliance. Perform load calculations, airflow analyses, and other technical assessments. Ensure our designs meet all relevant codes and standards (ASHRAE, LEED, NFPA, etc.). Prepare and review technical documents, including drawings, specifications, and cost estimates. Oversee installation, testing, and commissioning of HVAC systems. Mentor junior engineers and provide technical leadership to our project teams. Work closely with clients to understand their needs and deliver tailored solutions. What We're Looking For A Bachelor's degree in Mechanical Engineering or a related field. 8+ years of experience in mechanical design or design-build roles, especially in HVAC and piping systems. A Professional Engineer (PE) license is preferred. LEED Accreditation is a plus. Proficiency in HVAC design tools (AutoCAD, Revit, Trane Trace, Carrier HAP) and BMS systems. Strong communication and leadership skills. A team player who can manage multiple priorities while maintaining attention to detail. Benefits Compensation: $100,000-$150,000 (DOE) Vacation/PTO Medical Dental Vision 401k Bonus Relocation Email Your Resume In Word To Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, but you may also: christian.webb@cybercoders.com Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : CW7-1870991 -- in the email subject line for your application to be considered.*** Christian Webb - Recruiter For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 07/18/2025 and applications will be accepted on an ongoing basis until the position is filled or closed. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at Benefits@CyberCoders.com to make arrangements.

A well-known company is looking for a Senior Project Engineer or Assistant Project Manager to support ground-up high-rise projects in the multifamily and/or hospitality sectors in the St. Louis market. This role is ideal for a construction professional who thrives in complex projects, enjoys being involved in both field and office operations, and is looking to grow within a strong project team. Key Responsibilities Support project management teams on large-scale, ground-up high-rise projects Assist with schedule tracking, cost controls, and subcontractor coordination Manage RFIs, submittals, change orders, and project documentation Coordinate with architects, engineers, and consultants Participate in project meetings and contribute to project planning and execution Support closeout activities and turnover documentation Qualifications 3+ years of experience as a Project Engineer, Senior Project Engineer, or APM Proven experience on ground-up high-rise projects ($50M+ preferred) Background in multifamily and/or hospitality construction Strong understanding of construction documents and project workflows Ability to work collaboratively with field and office teams Bonus Experience Exposure to historic renovation, adaptive reuse, or preservation projects Experience working on projects with complex structural or design challenges

ACME Constructors Inc. | St. Louis, MO Employment Type: Full-time, In-Office Why Join Our Team? We are a 100% employee-owned (ESOP) company, which means you can build wealth and benefit directly from our shared success. Our culture is built on a foundation of collaboration, accountability, and excellence. We also offer a comprehensive benefits package, including: Competitive Compensation: Starting at $70,000 annually, based on experience Annual performance-based bonus Weekly pay Comprehensive Benefits: 401K with a 4% employer match Medical, Dental, and Vision insurance Employer-paid Life, AD&D, Short-Term, and Long-Term Disability Voluntary Accident Insurance Employee Assistance Program Generous Paid Vacation & Holidays About ACME Constructors Since 1947, we have been a leader in industrial construction, serving Fortune 500 and privately held companies across diverse industries. Our success is built on a commitment to safety and superior project management. With over 700 projects annually and three Missouri locations, we are a team of customer-driven, positive, and hardworking individuals with an entrepreneurial spirit. Our employee-owned structure fosters a deep sense of community and collaboration. About the Role We are looking for a proactive Project Engineer to assist with the planning, coordination, and execution of construction projects. This is a vital, full-time, in-office role that requires working closely with Project Managers and field teams to ensure projects are completed on time, within budget, and to the highest standards of safety and quality. Responsibilities Assist with project planning and scheduling. Review project plans and specifications. Manage technical documentation (submittals, RFIs, change orders). Perform quality control inspections. Support the procurement of materials and equipment. Provide technical support to construction teams. Assist in managing project costs and budgets. Qualifications Experience: Minimum of 2 years of experience in construction engineering or project management is preferred. Knowledge of construction processes and project management practices. Skills: Excellent communication, organizational, and problem-solving skills. Ability to work effectively in a team environment. Detail-oriented and able to manage multiple tasks simultaneously. Technical: Proficiency with Procore, CMIC, Microsoft Project, Bluebeam and the Microsoft Office Suite (Excel, Word, PowerPoint). Education: Bachelor's degree in Civil Engineering, Construction Management, or a related field. Professional Engineering (PE) license or working toward certification is a plus. READY TO APPLY? To apply, take the next step and share your resume with us. All inquiries, resumes and referrals shared are held in strict confidence. For questions and more information, contact ****************************. ACME is an Equal Opportunity Employer. We welcome differences in form of gender, race, ethnicity, disability, geography, socioeconomic status, age, politics, religion, philosophy, sexual orientation, gender identity or expression and veteran status. All applicants who share this goal are encouraged to apply-we look forward to hearing from you!

Company: The Boeing Company We are Boeing Global Services (BGS) Engineering team creating and implementing innovative technologies that make the impossible possible and enabling the future of aerospace. We provide engineering design and support, including aftermarket modifications, and are innovating to make product and services safety even stronger. Join us and put your passion, determination, and skill to work building the future! #TheFutureIsBuiltHere #ChangeTheWorld The Boeing Government Training Engineering Hardware Design Team is currently looking for an Associate (Level 2) and Experienced Mechanical Design Engineer (Level 3) to join their team in Hazelwood, MO or Oklahoma City, OK. This selected candidate will be responsible for the design, development, manufacture, and maintenance of aircrew and maintenance training devices for a variety of military fighter aircraft (F-15, F-22, T-7, T-38). The selected candidate will work with a cross-functional engineering and manufacturing team to develop and document complex electrical training systems solutions. These training systems include high fidelity aircraft crew station simulators, high resolution visual systems, aircraft representative maintenance trainers, and all of the computational and facilities infrastructure to support these devices. The design engineer will analyze and translate requirements into hardware designs with a focus on manufacturability. The designer will also define interface specifications, coordinate with suppliers, provide troubleshooting for integration and test, and research technology advances for potential applications. Position Responsibilities: Analyze system requirements Translate system requirements in detail part, assembly, and installation drawings Create documentation to capture system interface definition Test and validate hardware to ensure system designs meet operational and functional requirements Assist in monitoring supplier performance to ensure system integration and compliance with requirements Solves problems concerning fielded hardware and software over the entire product lifecycle Researches specific technology advances for potential application to company business needs This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Our teams are currently hiring for a broad range of experience levels including; Associate or Experienced Mechanical Design Engineers. Basic Qualifications (Required Skills/Experience): Bachelor's degree from an accredited course of study in Mechanical or Aerospace Engineering 2+ years' experience with design and analysis of basic Mechanical Systems Experience coordinating requirements with cross-functional engineering teams Preferred Qualifications (Desired Skills/Experience): 5 or more years' related work experience or an equivalent combination of education and experience Experience working within an agile development team Experience working in Siemens NX modeling software or other similar design tools Experience with aviation hardware, particularly crew systems components Experience with data analysis of system data Experience with test driven development Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range Associate Level: $79,050 - $115,000 Summary pay range Mid-Level: $96,050 - $140,300 Language Requirements: Not Applicable Education: Bachelor's Degree or Equivalent Relocation: This position offers relocation based on candidate eligibility. Export Control Requirement: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

Salary: Mechanical Design Engineer Mechanical Solutions, Inc. (MSI) Full Time St. Louis, MO About Us: Mechanical Solutions is a certified Union MBE mechanical contractor, brings over 13 years of expertise to the St. Louis area. Our focus is on enhancing the comfort and quality of living and working environments. Committed to fostering enduring client and community relationships, we prioritize clear and honest communication. Our expert team, comprising skilled sheet metal workers and pipefitters, is equipped to elevate your project in even the most challenging conditions. Thanks to our recently expanded, climate-controlled warehouse, our fabrication capabilities have significantly grown, ensuring the use of the highest quality materials. At the heart of Mechanical Solutions are our core values: efficiency, teamwork, safety, responsiveness, quality, and ethics. We guarantee to execute all projects safely and promptly, ensuring cost-effectiveness for our clients. Our comprehensive customer services span from estimates, design, fabrication, installation, all the way to close-out. The Role: If you are ready to bring your talent and mechanical engineering skills to meet exciting and new challenges, we look forward to having you join our team of professionals. We consult, design, test, and innovate HVAC solutions for clients of every size, and we have an opening for an experienced Mechanical Design Engineer to lead projects and provide design expertise. This position will allow you to work with cutting-edge computer modeling tools and travel occasionally to interface with clients and attend industry events. You will also have the chance to further your career through our comprehensive professional development program. We offer a competitive salary and benefits package, as well as a work environment that is both fun and professional. Responsibilities: Research and design HVAC systems to meet clients requirements in both large and small projects. Consult on HVAC systems and equipment design for a wide range of projects, and work with other engineers, project managers, and construction professionals as needed to create and/or modify design parameters. Analyze HVAC systems and equipment when necessary to find inefficiencies or malfunctions and create solutions to optimize performance and increase the efficiency of the systems operation. Communicate directly with customers to understand project requirements, goals, design specifications, and operational environments in order to evaluate cost, feasibility, and implementation of new HVAC equipment. Serve as project leader to coordinate efforts of managers, engineers and drafting personnel during all project phases. Qualifications: Bachelors degree in Mechanical Engineering, Construction Management, or related fields plus experience in the HVAC engineering Professional Missouri Engineer License Ability to work both independently and as part of a team Punctual and able to meet deadlines Excellent oral and written communication skills Experience with 3D Modeling programs such as AutoCAD, Revit and NavisWorks. Work with an adherent sense of urgency Why People Choose Mechanical Solutions Mechanical Solutions, Inc. is committed to creating an inclusive and safe work environment where people feel connected, valued, and empowered to reach their full potential. We partner with individuals who are dedicated to fostering a diverse and welcoming culture, where everyone can see themselves represented at every level of the company. We also strive to be leaders in the communities where we work, making a positive impact through our projects and people. Engineering Your Path to Success Career Growth We believe in promoting from within and supporting long-term development. Comprehensive Benefits 100% Employer-Paid Health Plans for employees Employer-Provided Dental and Vision Plans Employer-Sponsored Health Reimbursement Arrangement (HRA) 401(k) Retirement Plan with Company Match Employer-Provided Basic Life Insurance (up to $200,000) Employer-Provided Long-Term Disability (LTD) Insurance Additional Benefits available for employees and their families Headquarters Perks In-office gym Personal training sessions Yoga classes Massage therapist Game room Company Culture Fun, energetic, and people-centered Strong focus on work-life balance and safety Team activities and employee engagement Support for both physical and mental wellness Our Impact and Recognition One of the fastest-growing contractors in St. Louis Part of the largest MBE construction firm in the region Ranked #34 Top Data Center Construction Firms (BD+C) Ranked #74 Top Healthcare Construction Firms (BD+C) Known for complex, creative, award-winning, and mission-critical projects Job sites nationwide Come be part of our exciting growth and supportive team. No recruiter needed; all applicants will be kept confidential. Mechanical Solutions, Inc. is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category.Mechanical Solutions, Inc. is a background screening, drug-free workplace. Both of these requirements will be partial determination of final result in hiring.Mechanical Solutions, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of Mechanical Solutions, Inc. without a prior written search agreement will be considered unsolicited and the property of Mechanical Solutions, Inc. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Full-time Description Mechanical Design Engineers are responsible for designing custom weld fixtures and/or machines; interacting with customers while managing large and small programs as well as supporting the onsite fabrication and assembly. Mechanical Design Engineers work in a team environment designed to help New Employees become productive quickly. Duties Design weld fixtures and/or machines using Autodesk Inventor and Autodesk Vault. Work with Controls Engineering on the design of the controls systems. Support manufacturing during the fabrication and assembly process. Support onsite runoff of equipment with customers. Assist with the creation of shipping and manual documentation. Troubleshoot issues on or offsite throughout the life of the design. Assist application engineering with new opportunities. Actively participate in department and companywide continuous improvement initiatives. Requirements 7-10 years of experience in a mechanical design engineering role Proficient with 3D CAD software. (AutoDesk Inventor and Vault is a plus) Creative in conceptualizing new machine and fixture designs. Ability to deal with change and meet aggressive deadlines in a fast paced work environment. Proficient at project management including strong organizational and planning skills. Supportive of internal and external customers' needs. Ability to communicate well with customers, team members, management, etc. Ability and willingness to occasionally travel. Adaptable and self-motivated learner. Basic Microsoft Office skills. Basic knowledge of GD&T. Familiar with Safety Codes, ANSI B11, OSHA, and Industry Accepted Guarding practices, etc. is a plus. Basic understanding of GMA Welding is a plus. As an employee owned company we seek candidates that have an entrepreneurial spirit and “can do” attitude. Qualified candidates should possess a minimum of seven years of mechanical design experience.

Are you looking for a place where collaboration, inclusivity, and growth are at the core of everything you do? At National Cart Company (NCC), we believe in dignity, integrity, growth and curiosity -values that shape our culture and drive our success. Our motto, safer, better, faster, isn't just words to us; it's how we approach every task and challenge. While we can teach you technical skills, we know that embracing these values is what truly makes a difference. As an essential business, we manufacture industrial metal products used by Fortune 500 companies-think grocery stocking carts, distribution center carts, and cart corrals. Your work here will have a direct impact on products that millions of people rely on every day. We are currently looking for a Design Engineer to join our team! The Design Engineer is responsible for the development, launch and technical support of products throughout the entire product development cycle. Development activities include product design, costing, selection and testing of materials, and preparation of all necessary engineering, manufacturing, and procurement documentation to ensure compliance with customer requirements. The Engineer is also responsible for supporting technical aspects of legacy products during manufacturing and sourcing activities. The Engineer actively monitors, measures, and responds to department metrics for new product introduction (NPI) execution, documentation availability and general project management. Key Responsibilities * Champions assigned projects through the NPD (New Product Development)/NPI (New Product Introduction) process. * Coordinate with the CAD Design and Drafting team to achieve deliverables on a timely basis. * Communicates with internal and external customers to determine product requirements and needs. * Collaborates with the team to design safety, quality, and productivity into product designs and fixtures * Ensures designs are manufacturable within capability of internal manufacturing processes. * Develops bill of materials, standard cost, and time observation data. * Ensures system data (I.e., bill of materials, labor times, work center structure, etc.) are complete and accurate. * Identifies and resolves department issues and seeks help when necessary. * Implements new product introduction (NPI) process improvements and takes necessary steps for compliance to processes across the organization. * Manages engineering and product data to ensure it is accurate, comprehensive, and available in a timely manner to support production. * Monitors work quality and productivity for recently launched products. * Researches, creates, and details specifications for purchasing to procure goods and services necessary to meet finished product requirements. * Identifies any gaps in standards and competencies in manufacturing technologies, industry specifications, drafting/design standards, and addresses through training or off-site education as appropriate. * Evaluates needs for testing of new and existing products and determines best methods to execute. * Provides technical support for preventative maintenance programs. * Leads by example and fosters a safe working environment. * Adheres to company regulations and embodies NCC's Values. * Leads and participates in continuous improvement initiatives. * Performs other duties as assigned. Qualifications & Skills * Bachelor's degree in Engineering preferred along with experience in managing established engineered products. * 3 years' engineering experience. * Experience with SolidWorks or similar software required. * Solid understanding of Product Data Management (PDM) tools. * Competency in metal working processes, equipment, and related design technologies. * Must be highly competent in engineering design parameters and specifications for common materials, finishes, and drafting standards. * Requires strong planning, analytical and problem-solving skills. * Should have strong organizational skills and foster cross functional team building. * Must exhibit leadership courage to influence the organization to achieve goals. * Requires an individual who is flexible, assertive, stress tolerant, and optimistic. * Proficient in Microsoft Office. Work Environment & Physical Requirements This position requires the ability to perform the following with or without reasonable accommodation: * Balances, stoops, kneels, crouches, and reaches to work overhead. * Pushes and pulls materials, fingers and grasps parts and components. * Tolerates loud noise. * Sits and stands for a minimum of 8 hours with limited breaks. * Operates a computer extensively daily. * Demonstrates manual dexterity. * Performs visual inspections. * Requires visual acuity to access details (I.e., office equipment, email, invoices, etc.) * Requires communication skills so ideas and instructions are clearly and/or quickly understood. * Requires the ability to distinguish between speech, machinery, and other sounds to understand instructions and/or directions. Note: This job description outlines the general nature and level of work performed. It is not an exhaustive list of all responsibilities, duties, and skills required for the position. Duties may change or be assigned as needed to meet business needs. Why Join NCC? At NCC, we value our employees and offer a range of benefits to ensure your well-being: * Competitive pay- paid weekly. * Medical, dental, and vision insurance. * Quarterly bonuses and perfect attendance incentives. * 401(k) with 5% match. * Vacation pay, holiday pay, short-term and long-term disability. * Life insurance and employee assistance program (EAP). * Overtime opportunities. * Free company T-shirts and a fresh market in our break room. If you're ready to join a company that values growth, inclusivity, and teamwork, apply today and become part of the NCC family! EEO/AA Employer

Works with Manufacturing Engineering team to develop models of tooling/fixturing concepts used to machine aircraft parts. Responsibilities: Performs CAD modeling functions to create accurate solid models of machined parts, assemblies, or fixtures Conceptualize manufacturing process options for CNC machining of complex structural aircraft parts Work with team to develop machining sequence plans and conceptual fixture designs for efficient machining of aluminum, titanium and stainless steel structural aircraft parts Requirements: 2 to 4 years trade school, vocational education, work experience, or apprenticeship. Applicant must be a U.S. Person Experience with NX/Unigraphics and/or CATIA is a plus Aerospace and/or manufacturing experience is a plus May be required to obtain and maintain a U.S. Security Clearance at the appropriate level. Requires U.S. Citizenship. Must also be able to satisfy federal government requirements for access to government information, and having dual citizenship may preclude you from being able to meet this requirement. Company Profile: Patriot Machine, Inc. is a technologically advanced aerospace manufacturer headquartered in St. Charles, Missouri. We supply complex structural parts and assemblies made from aluminum, titanium and steel to America's largest aircraft manufacturers. Our culture of innovation and continuous improvement attracts skilled workers who are looking for a challenge. We offer opportunities to learn, grow and help shape the future of aerospace by applying innovative approaches to problem-solving. Patriot Machine is a woman-owned business currently consisting of over 190 employees and 277,000 square feet of manufacturing and office space. We recently expanded into a new advanced manufacturing facility with ample space for further growth. We provide employees the opportunity to work alongside industry experts at an ultramodern manufacturing company. Patriot Machine offers an excellent benefits package including health, dental, vision, life/disability, 401(k) with employer contributions, paid vacation and holidays.

Are you ready to join a growing engineering consulting firm with a strong gas utility team supporting clients across multiple industries? ENTRUST Solutions Group is expanding its footprint in Missouri and seeking talented engineers to support high-pressure gas distribution and transmission projects. Our Gas Programs team is at the forefront of utility infrastructure, working on main replacements, public improvements, pipelines, regulator stations, and trenchless installations. As a Design Engineer, you'll be part of a multidisciplinary team, collaborating closely with project engineers and designers to deliver high-quality engineering solutions. You'll perform engineering calculations, design pipeline routes, and develop construction estimates. This is a fantastic opportunity to grow your career while contributing to meaningful infrastructure projects in a supportive and close-knit office environment. This role offers hybrid work flexibility, with site visits and in-person meetings in St. Louis, Missouri. Minimum Requirements: * Bachelor's degree in civil, mechanical, chemical, or petroleum engineering from an accredited institution. * Must have valid driver's license without restrictions for occasional project visits. Preferred Qualifications: * 0-4 years of natural gas engineering experience, preferably at an engineering consulting firm. * Familiarity with AutoCAD, MicroStation or other 2D and 3D modeling software (drafting will likely not be part of your role, but experience with the software our drafters and designers use is still very valuable). What We Offer: * A supportive and inclusive work environment that values diversity and encourages innovation. * Opportunities for professional growth and career development. * Competitive salary and comprehensive benefits package, including generous paid time off, retirement program with a company match, tuition reimbursement, and flexible work schedules. * Benefits offered include company-sponsored medical, dental, vision, and 401(k) plan with company match. Also offered are tuition reimbursement, voluntary life, disability, critical illness, accident and hospitalization plans. HSA or FSA medical accounts and FSA dependent care and transportation/parking accounts are also available. These benefits are subject to employee contribution amounts generally set annually. Full-time employees are eligible to earn PTO hours. May be eligible for discretionary bonus as determined by the company. Why Join Us? At ENTRUST Solutions Group, we are a community of over 3,000 dedicated professionals committed to our clients and each other. As an ENR Top 100 company, we provide comprehensive engineering, consulting, and automation services to various industries, including gas and electric utilities, telecommunication service providers, pipeline operators, and industrial companies. We are a forward-thinking organization dedicated to leveraging cutting-edge technology to drive success. We are committed to fostering a culture of innovation and continuous improvement. We believe in fostering a culture of inclusivity and respect, where everyone feels valued and empowered to contribute their unique perspectives. If you are passionate about Gas Programs and looking for a place to grow your career, we would love to hear from you! To learn more about ENTRUST Benefits and Culture, please visit our company LinkedIn page and follow us at: ****************************************************** ENTRUST Solutions Group is proud to be an Equal Employment Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Headhunters and recruitment agencies may not submit resumes/CVs through this website or directly to managers. ENTRUST Solutions Group does not accept unsolicited headhunter or agency resumes and will not pay fees to any third-party agency or company that does not have a signed agreement with ENTRUST Solutions Group. #LI-NF1 #LI-Hybrid

Job Description Cochran is a growing civil engineering firm with 7 Missouri offices, offering services in construction administration, materials testing, architectural and geotechnical engineering, and land surveying. Serving both public and private sectors, Cochran's expertise spans municipal, commercial, residential, transportation, water/wastewater, site development, retail, planning, and interior design. With 120+ professionals, the firm delivers tailored solutions backed by deep expertise and is guided by core values of teamwork, excellence, quality, and trust-ensuring principal involvement and outstanding service throughout every project. Cochran's Union, Missouri headquarters location, is looking for a Civil CAD Drafter/Designer to join our team. Position Overview Join our civil engineering team as a CAD Drafter/Designer, creating precise technical drawings that bring infrastructure and site development projects to life. You'll collaborate with engineers to turn concepts into buildable plans, ensuring accuracy, compliance, and efficiency from design through completion. Key Responsibilities: Must have an understanding of Civil CAD-based drafting procedures. Produce drawings using computer-assisted drafting systems (CAD), Civil 3D software Draft plans and detailed drawings for structures, installations, and construction various projects Draw maps, diagrams, and profiles, using cross-sections and surveys, to represent elevations, topographical contours, and structures Correlate, interpret, and modify data obtained from topographical surveys, well logs, and geophysical prospecting reports Finish and duplicate drawings and documentation packages, according to required mediums and specifications for reproduction, photography, or other duplicating methods Review rough sketches, drawings, specifications, and other engineering data received from Civil Engineers to ensure that they conform to design concepts Provide Engineers and Surveyors with drafting support Qualifications 2-5 years civil or land surveying experience, preferred Two-year design/drafting degree Proficiency with Civil 3D, Microsoft Office Benefits Competitive salary and performance-based bonuses 100% company paid Medical, Dental, Vision, Life, and Long-Term Disability insurance for employees, plus company deductible assistance 401(k) with 4% company match Generous PTO plan and 7 major holidays Continuing education and professional development support

Job Description Essential Duties and Responsibilities: Leads multiple engineering programs, including defining the project scope of works, product development records, milestones, and staff requirements, and customer requirements. Leads complete product design programs from requirements definition through detailed design, analysis, prototyping, verification, qualification testing, and production handoff. Create and maintain 3D models, engineering drawings, and bills of material with appropriate GD&T and configuration control. (Solidworks Prefered) Perform or coordinate necessary engineering analyses (e.g., structural, thermal, tolerance, reliability, FMEA) to validate design adequacy prior to test. Plan and lead prototype build activities, working closely with manufacturing, supply chain, test, and quality to resolve technical issues. Develop verification and qualification plans, including test methods, success criteria, sample configuration, and traceability to requirements. Support or lead execution of design verification and qualification testing, including test readiness, test oversight, data review, and anomaly resolution. Analyze test results, document non-conformances, drive root cause and corrective actions, and update designs and documentation as required. Prepare and present design reviews (concept, preliminary, critical design, test readiness, qualification/production readiness) to internal and external stakeholders. Ensure designs comply with applicable industry standards, customer specifications, and regulatory requirements. Generate and maintain technical documentation, including design reports, analysis summaries, test reports, and qualification evidence. Coordinate with project management to provide engineering inputs to schedules, risk registers, and resource planning; proactively manage technical risks. Provide technical support through production launch and early field use, including evaluation of issues and implementation of design improvements. Champion design-for-manufacture, design-for-assembly, and design-for-reliability practices throughout the product lifecycle. Mentor junior engineers and contribute to continuous improvement of design and qualification processes, tools, and standards. Makes improvement suggestions for department processes and procedures. Required Education/Experience/Certifications: Bachelor's degree in Mechanical, Aerospace, or related engineering discipline from an accredited program. 5-8+ years of progressive product design and development experience, including direct responsibility for verification and qualification or certification testing in a regulated or standards-driven environment. Demonstrated experience owning designs from concept through detailed design, prototype build, test, and transition to production, ideally within aerospace or highly regulated industries. Benefits Base Pay and Overtime Pay Eligible Bonus Opportunity Paid time off 10 company holidays Training & Development Retirement Benefits - 401k matching Tax-Advantaged Accounts Medical, dental, vision coverage Flexible Spending Account Life Insurance Parental Leave Pet Insurance Employee Assistance Program The Guller Foundation, the charitable arm of Essex Industries, contributes to various local organization

If you post this job on a job board, please do not use company name or salary. Experience level: Associate Experience required: 2 Years 5 Months Education level: Associate degree Job function: Design Industry: Mechanical or Industrial Engineering Compensation: $61,000 - $70,000 Total position: 1 Relocation assistance: Yes Visa sponsorship eligibility: No END CLIENT NAME: Penta Engineering PENTA is seeking a motivated Mechanical Designer with 2 to 5 years of 3Ddesign-modeling experience who desires to grow in a technical and professionally diverse environment. Associate degree or relevant technical degree required. Strong problem-solving and communication skills essential. The candidate will be responsible for developing designs in the preparation of drawings, managing the drafting function for projects assigned, supporting the department manager in maintaining the design (drawing) standards, and suggesting details to complete the drawings per standards. Core competencies required in planning drawing work for the mechanical team, preparation of mechanical flow diagrams and drawings to support equipment specifications. The successful candidate will be experienced in engineering sketches and calculations, general arrangements, and plant layouts drawings. Most of our work is done in Revit and is preferred, but Solidworks or Inventor + other 3D software is acceptable. Responsibilities: Maintain drawing and design standards based on the Mechanical Department's current standards Develop the design per company standards Notify the PM and Leads about scope changes Check detail drawings and revisions to drawings. Develop piping layouts and piping schematics, per lead engineer's directions Assemble available information as required for drawing production, including GA and equipment drawings, coordinating with structural engineers and mechanical designers where differences occur. Be the engineers' first "detail" checker. Review details for completeness and accuracy. Oversee filing of production drawings Develop issue folder for issuing drawings Make records of meetings and phone conversations Review drawings of other disciplines for mechanical requirements and interface Package Details

This role is with Copeland. Copeland uses RippleMatch to find top talent. Electronic Design Engineering Internship Term: Spring 2026: Jan 5 - May 11 Shape a Sustainable Future with Copeland At Copeland, we're driven by purpose and powered by people. Our Internship Program gives you the opportunity to gain real-world experience while contributing to innovative, sustainable solutions that make a difference for people and the planet. As an intern, you'll be immersed in meaningful work, supported by expert mentors, and empowered to explore your potential across multiple areas of our business. This is a 3-4 month paid learning experience where you'll have the chance to connect with other interns and engage with leaders across Copeland. You'll work alongside passionate professionals who are committed to helping you grow-both personally and professionally. From day one, you'll contribute your ideas, build meaningful skills, and take part in hands-on projects that make a real impact on our business and the world around us. What to Expect Real projects with real impact-from day one Mentorship from leaders who are invested in your growth Opportunities to explore multiple departments and career paths A culture built on collaboration, innovation, and inclusion Ready to build what's next-for your future and the world? Join us at Copeland! The Team & Role Our mission is to develop electronic products to meet the sales growth objectives of E&C. We are a collaborative global team with 300+ engineers in 12 locations in six countries. We work closely with Operations, Quality, Product Management, Sales and Finance during the product development process. Key Responsibilities & Your Day-to-Day Collaborate with product management and sales in the generation of product requirements Collaborate to develop innovative concepts and ideas Communicate project requirements to others (local or global) as well as project status with team members Design and develop tests for new products and/or feasibility studies Make engineering documents, assembly drawings, installation instructions, and test specifications Participate on a team developing new products Resolve technical problems on projects What you Bring Experience designing analog and digital circuits. Experience with oscilloscopes and logic analyzers. Experience writing firmware for microcontrollers. Minimum Qualifications Currently enrolled and pursuing a Bachelor's degree in Electrical Engineering Cumulative GPA of 3.0 or higher Anticipated Graduation of December 2026 or May 2027 Previous experience designing analog and digital circuits, working with oscilloscopes & logic analyzers & writing firmware for microcontrollers, preferred Legal authorization to work in the United States - Sponsorship will not be provided for this role Why Copeland? Conversion focused program offering competitive compensation and benefits Flexible dress code and collaborative work environment Access to social, networking, and professional development events Relocation assistance may be provided to program participants who reside more than 51 miles from the internship location. Work Authorization Copeland will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1 with OPT or CPT, H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire.

Job Description The overall responsibility of this position is to conduct engineering activities to support the AITX railcar fleet. This includes lease returns, car reassignments and repair of railcars in shops. Review and create appropriate repair projects for railcars per AAR, AWS, NACE and FRA recommended designs and regulations. This position requires the ability to perform independent research into new applications or improved techniques for repair. Support of the AITX Customer Service and Sales departments is a key aspect for this role. Job Duties Prepare documents such as car specifications, alternates, and cost estimates for such car alterations. Evaluate customer specifications to determine if AITX can supply or modify a car or car features to meet those requirements. Work closely with customers to determine their product requirements, improve reliability, product loading or unloading, handling, etc. Create projects, standards, and repair procedures to support the railcar fleet and ensure reliability. Work closely with customers to determine their product requirements, improve reliability, product loading or unloading, handling, etc. Work closely with repair shops for completion of repairs and railcar conversion providing detailed instructions and drawings for such repairs. Compile engineering data and conduct reliability analyses to define and improve service life usage. Work closely with repair shop personnel to reduce scrap, labor inefficiency, improve processes, etc. Utilize Lean and design for cost reduction techniques. Recommend design changes to improve quality, performance and reduce repair or life cycle costs. Be knowledgeable of the AAR and FRA regulatory requirements that impact the design of the product. Work closely with suppliers to approve their product's application to our design. Be knowledgeable of the quality assurance plan requirements as it pertains to engineering. Utilize CAD to develop models and drawing package required to fabricate the parts and assemble them into a completed product. Education/Experience Bachelor's degree in engineering (Mechanical or Chemical Engineering preferred) Prefer 5 years + experience in Railcar Maintenance Engineering. Tank car maintenance and repair knowledge along with knowledge of FRA and AAR regulatory requirements is a plus. Physical Environment Physical Abilities Stand - frequently Walk - continuously Sit - occasionally Climb - frequently Crawl - frequently Squat or kneel - frequently Bend - frequently Fine Manipulation - N/A Reach Outward - frequently Reach above shoulder - occasionally Lift / Carry 10 lbs or less - frequently 11 - 20 lbs - frequently 21 - 50 lbs - frequently 51 - 100 lbs - occasionally Over 100 lbs - N/A Push / Pull 10 lbs or less - frequently 10 - 20 lbs - frequently 20 - 50 lbs - frequently 51 - 100 lbs - occasionally Over 100 lbs - N/A N/A (Not Applicable) - Activity is not applicable to this occupation Occasionally - Occupation requires this activity up to 33% of the time (.25 - 2.5 hrs/day) Frequently - Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5 hrs/day) Continuously - Occupation requires this activity more than 66% of the time (5.5+ hrs/day) This is a general description of the Duties, Responsibilities and Qualifications required for this position. Physical, mental, sensory, or environmental demands may be referenced to communicate the way this position traditionally is performed. Whenever necessary to provide individuals with disabilities an equal employment opportunity, AITX will consider reasonable accommodations that might involve varying job requirements and/or changing the way this job is performed, provided that such accommodations do not pose an undue hardship.

Apple is seeking a highly skilled and experienced individual to join their team, which is dedicated to integrating the latest machine learning techniques into software development. The role involves developing innovative machine learning tools and frameworks to transform the way software development is done at Apple and beyond. Candidates should have a deep understanding of state -of -the -art deep neural network (DNN) acceleration architectures and their performance tradeoffs. They should also possess strong programming skills using ML tools such as Python, PyTorch, Tensorflow, CUDA, Metal, and C/C++. The role requires at least 10 years of tech lead software engineering/ML experience, strong leadership skills, and the ability to guide technical leads, establish core execution teams, and define technical roadmaps. The position aims to accelerate OS and app development while ensuring user privacy, performance, and power efficiency. The candidate will play a pivotal role in shaping the future of software development at Apple and will have the opportunity to work with a dynamic team of scientists and engineers. This is a home -office -based role.

**Job ID: 112524** Leonardo DRS is a prime contractor, leading technology innovator and supplier of integrated products, services and support to military forces, intelligence agencies and defense contractors worldwide. The company specializes in naval and maritime systems, ground combat mission command and network computing, global satellite communications and network infrastructure, avionics systems, and intelligence and security solutions. Additionally, the company builds power systems and electro-optical/infrared systems for a wide range of commercial customers. Headquartered in Arlington, Virginia, Leonardo DRS is a wholly owned subsidiary of Leonardo S.p.A. For additional information on DRS, please visit our website at ******************* **Company Overview** **DRS Marlo Coil** manufactures robust heat transfer, refrigeration, and air handling equipment for industrial, commercial, utility and marine markets. Our custom engineered heat transfer solutions are used in a variety of configurations to cool, heat, and dehumidify air streams for process and building comfort. We pride ourselves on having equipment on most surface combatant ships and submarines in the U.S. Navy fleet. Additionally, DRS Marlo Coil is positioned for significant growth in the Industrial/Commercial markets. For more information on Leonardo DRS, please visit ******************* , and for more information on our Commercial/Industrial business, please visit: ***************** . **Job Summary** Join us as a Mechanical Engineer II, responsible for the development, testing and analysis of a variety of HVAC&R products for both commercial and defense markets including heat exchanger coils, rugged air conditioning systems, refrigeration plants, and air handling systems. This position will be responsible for supporting product development and proposals; heat transfer analysis; sizing and selecting components; creating associated documentation; and supporting product testing, qualification, and production. Analysis support will involve interpretation of test results, basic thermodynamic calculations, and carrying out software simulations to predict performance of a range of equipment. **Job Responsibilities** + Perform heat transfer, thermodynamic, material & energy balance, and fluid system analysis + Support projects and proposals for the development and support of HVAC&R equipment, especially heat exchangers, air conditioning, refrigeration, and air handling systems + Support system design through flowsheet (P&ID) development + Refrigeration system analysis and component selection + Support testing, qualification, documentation and analysis of prototypes, products, systems or subsystems + Create piping/plumbing layouts for equipment tests + Review customer specifications and requirements in support of bids and proposals and development of compliant designs + Specify and evaluate supplier components, subsystems, and services + Support rapid prototyping of development projects + Coordinate test schedules with lab, engineering and production + Suggest improvements and support lab system upgrades **Education & Experience Requirements** + Bachelor's Degree in mechanical engineering, chemical engineering, or related technical field + Comfortable and competent writing and creating technical documentation + Competent using MS Office, especially Excel + Experience designing and analyzing mechanical components, systems and equipment, preferably HVAC&R (air conditioning, air handling, chillers and refrigeration) equipment + Experience designing, selecting components and working with fluid handling systems including pumps, control valves, fittings, and/or other fluid handling systems + Experience using or designing LabView systems + Experience designing defense products, especially for the US Navy U.S. Citizenship required. _Taking care of our people is a top priority at Leonardo DRS. We are proud to offer competitive salaries and comprehensive benefits, including medical, dental, and vision coverage, a company contribution to a health savings account, telemedicine, life and disability insurance, legal insurance, and a 401(k) savings plan. We champion wellness programs that focus on physical, emotional, and financial well-being. We develop our talent by offering programs and activities to support career-growth, professional development, and skill enhancement. And we understand there is more to life than work, and the importance of offering flexible work schedules with our 9/80 program, competitive vacation, health/emergency leave, paid parental leave, and community service hours._ _Leonardo DRS, Inc. and its subsidiaries provide equal opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, protected veteran status, or any other characteristic protected by federal, state, or local laws._ _\#NPS_

This job is with Encode, Inc a fully owned subsidiary of Lancesoft •Develops and maintains relationships and partnerships with customers, stakeholders, and peers •Provide technical guidance and mentorship to junior engineers, fostering a culture of continuous learning and improvement •Provides oversight and approval of technical approaches, products and processes •Leads work with customers to develop and document electronic and electrical system requirements on complex projects •Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications •Leads testing and validation work on complex system designs to assure that operational and functional requirements are met •Manages performance of critical suppliers to ensure system integration and compliance with requirements •Assigns responsibility for activities to team members and ensures technical correctness and consistency of products and services •Leads research into technology advances for potential application to company business needs Required Qualifications: (Required Skills/Experience): •Bachelor of Science degree or higher from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science •9+ years of systems engineering experience involving: system requirements, functional decomposition and allocation, integrated design, analysis and evaluation, verification •9+ years of experience with Avionics Hardware & Software development, design, production and project management •9+ years of experience in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues •9+ years of experience with Hardware and LRU development, test and qualification. Preferred Qualifications: (Desired Skills/Experience): •10 or more years'related work experience or an equivalent combination of education and experience •Experience with Advanced Cockpit Displays: Heads Up Display (HUD), Up Front Control Display (UFCD), Large Area Displays (LAD), and mission systems avionics equipment •Active U.S. Secret Security Clearance strongly preferred •Previous experience in the defense or aerospace industry •Experience with commercial and military avionics systems •Experience working with suppliers and supply chain management •Proposal development experience Bachelor of Science degree or higher from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science

About Watlow Watlow is a global technology and manufacturing leader who provides world class engineering expertise through innovative thermal products and systems, enabling our customers to thrive.Guided by our values: Do what is right, Always learning and improving, Respect everyone, and Lead with service and humility - we empower our people to turn ideas into real impact. Joining Watlow means becoming part of a team that embraces challenges, grows together, and shapes the future of technology, while making a real difference in the world. Description Watlow's St. Louis location serves as our global headquarters and a hub for innovation, engineering, and advanced manufacturing. Here, we design and develop cutting-edge thermal solutions that power critical applications across industries such as semiconductor, energy, and medical technology. We are hiring a: Product Development Co-op St. Louis, MO-Onsite About the role As a Product Development Co-op at Watlow, you will gain hands-on experience in designing and executing tests that shape the future of our products. Your work will directly impact innovation and quality, contributing to the success of our teams and customers worldwide.We are looking for a problem solver and continuous improver who thrives in a collaborative, fast-paced environment. You have a strong engineering mindset, a passion for quality, and the desire to make a tangible impact. If you're ready to take ownership and drive meaningful change, this role is for you. What You'll Do: Hands-on experience working in an electric heater test lab or machine shop alongside experienced engineers and technicians Assist in gathering test requirements and writing test procedures and plans Design and assemble test fixtures, wiring, and programming controllers Execute and monitor tests, perform failure and root cause analysis Write detailed test reports What you'll need to succeed? Pursuing an engineering bachelor's degree from an accredited university Preferred: Electrical or Mechanical Engineering Experience writing test plans and procedures Coursework in electrical circuits and heat transfer preferred Solid modeling experience (SolidWorks preferred) Aptitude for using tools; LabVIEW experience is a plus Why Join Watlow's team: The health, well-being and financial stability of you and your family is a high priority to us. The Watlow Total Rewards Plan includes competitive compensation and a full range of life and career enhancing benefits.Work model: OnsiteLearning and growth opportunities: Work with cross-functional teams and gain hands-on experience in a state-of-the-art testing facility. Diversity & Inclusion We proactively embrace diversity in all its dimensions across our company and cultivate a culture of inclusion and forward thinking that respects and reflects each team member's individual strengths, views, and experiences. Watlow takes pride in being an inclusive equal opportunity employer and considers for employment qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.