Design engineer jobs in Sanford, FL - 793 jobs

Job Brief We are looking for a skilled CNC Operator to cut and join metals and other materials at our facilities. You will operate appropriate equipment to put together mechanical structures or parts with a great deal of precision. A CNC operator must be competent in using potentially dangerous equipment following all safety precautions. The ideal candidate will also have a steady hand and great attention to detail. Knowledge of different kinds of metals and their properties is essential. Responsibilities Read blueprints and drawings and take or read measurements to plan layout and procedures Determine the appropriate tooling and forming methods based on drawing requirements Set up machines in according to specifications Misc manufacturing processes. Package, Countersink, Time Save, deburr, Daily machine P.M. Align components using calipers, rulers, clamp pieces, etc. Assemble fabricated components Repair machinery and other components as needed CAD design (Solidworks) as needed Maintain equipment in a condition that does not compromise safety Requirements Proven working experience as CNC Laser Operator, CNC Brak Operator, & CAD (Solidworks) - 5 years Experience using a variety CNC fabrication equipment. Setup and calculation of bend deduction and part adjustments for material compensation. Experience adjusting CNC Laser/Brakes. Nest and sheet utilization Ability to read and interpret technical documents and drawings Use measuring equipment. (Calipers & Tape measures) Knowledge of relative safety standards and willingness to use protective clothing Deftness and attention to detail Stand for long periods of time 6 - 8 hours a day Lift-up to 50-80 lbs. Able to obtain a forklift certification Team Player and ability to work overtime when required.

Job Responsibilities (include but not limited to): • 3D modeling of piping and equipment and isometric extraction in Creo/Pro-E., • Preparation of drawings/documents for General Arrangements and piping isometrics drawings, • Assist with coordination of 3D model activities, i.e., input, interference reconciliation, etc. with other physical related disciplines, • Assists with plans and schedules and prepare/maintain design procedures, standards to provide quality design documents, • Interface with stress and pipe support engineers, construction, and suppliers during the preparation of piping designs for the purpose of model/space control, etc., • Perform coordination review of specifications and other documents prepared by others. • Candidate should possess knowledge of piping codes such as ASME B31.3 or B31.1. Basic Qualifications: • AA/AS degree or certification in an engineering or drafting/design with 3 years' experience or; 7 years related experience • US Citizenship required • Must be able to complete a pre-employment drug screen, and background check. Minimum Qualifications: • Piping, equipment, and assembly modeling experience • Knowledge of ASME B31.1 and/or B31.3 piping codes Preferred Qualifications: • Creo Piping/Modeling Experience

Our client is a full-service fire alarm & suppression company who have been in business for over 25 years. They offer high quality industrial and commercial fire protection systems and services. They are now looking to add a Fire Alarm Design Engineer to their growing team. You will be joining a business that has several offices down the East Coast, this role will be based in the Orlando, Florida office Fire Alarm Designer As a Fire Alarm Designer, you will be responsible for creating comprehensive fire alarm system designs that meet project specifications, client needs, and regulatory requirements. Your work will involve collaborating with architects, engineers, and clients to develop effective solutions that ensure safety and compliance with fire codes and industry standards. You will utilize design software and your technical expertise to create detailed layout drawings, schematics, and specifications for fire alarm systems in various types of buildings. Job Responsibilities Read and interpret building construction documents such as drawings, specifications and other contract documents. Prepare fire alarm shop drawings, specifications, equipment submittals and computer hydraulic calculations as needed for compliance with applicable fire protection codes. Prepare material data submittals for fire alarm equipment and material as necessary. Survey existing buildings for accurate, economical installation of fire alarm systems. Work closely with Design Manager, Sr. Designer, Project Managers, field staff and other employees throughout the company. Generate Request for Information Forms (RFI's), test certificates and Operation and Maintenance Manuals (O&M's). Attend Project Manager's meetings as necessary. Job Qualifications NICET certification - Level I or higher. 3+ years' experience in commercial / industrial fire alarm design. CAD experience. Ability to read & analyze building construction documents. Ability to work in a timely manner and meet deadlines. Must possess a valid unrestricted driver's license. Must be able to drive to job sites. Must be detail oriented. Ability to communicate properly and professionally, both verbally and by documentation. Ability to coordinate and work well with others.

About Us: CUES is the global leader in water, wastewater, and stormwater inspection equipment. We design advanced robotic systems that keep water infrastructure safe and reliable. What You'll Do Design & Develop: Create mechanical systems for robotic cameras, transporters, and lifting devices. Innovate: Work on electromechanical systems for mobile robots used in pipe inspection and repair. Collaborate: Partner with electrical, firmware, and software engineers to build integrated robotic solutions. Model & Analyze: Use SolidWorks for 3D modeling and perform simulations to optimize performance. Test & Validate: Develop test methods, analyze data, and ensure compliance with UL, ANSI, ISO standards. Lead Projects: Manage schedules, guide junior engineers, and drive design improvements. Stay Ahead: Research emerging technologies in robotics and automation. What We're Looking For Education: Bachelor's in Mechanical Engineering (Master's preferred). Experience: 6+ years in mechanical design for robotics, automation, AGVs, or drones. Skills:CAD proficiency (SolidWorks) Machine design (power transmission, sealing, mechatronics packaging) Knowledge of GD&T, FEA, and design for manufacturing Familiarity with electrical principles and interdisciplinary teamwork Bonus Points: Experience with controls programming and electronics. Why Join Us? You'll help shape the future of robotic systems that protect critical water infrastructure-working on cutting-edge technology in a collaborative environment. Would you like me to also create a short version for posting on LinkedIn or job boards (around 4-5 bullet points), or a candidate screening checklist based on this role?

GAI Consultants is seeking a Senior Project Engineer with 8+ years of experience in developing roadway design projects for FDOT. Join GAI and make your mark among a team of engineering, planning, and environmental consultants that provides innovative solutions to energy, transportation, development, government, and industrial clients worldwide. GAI is the right place for talented and motivated individuals who seek to distinguish themselves in a company poised for unlimited growth. Qualifications: EOR for projects and the oversight of junior engineers in the development of plans, reports, and specifications. PE Registration in Florida is required. Knowledge of ORD and Design Build is a plus General Characteristics Applies broad knowledge of principles and practices in a specific practice area. Independently evaluates, selects, and adapts standard techniques, procedures, and criteria. Leads tasks and projects of moderately complex scopes. Develops plans, specifications, and other project documents. Selects appropriate principles of engineering economics, and probability and statistics to analyze risk in a complex engineering problem. Minimum Years of Experience 8+ Years of Experience Education B.S. or M.S. Engineering Certification/Licensure Professional Engineer (P.E.) License, reciprocity in multiple states. Technical Responsibilities Develops and reviews complete project documents for conformity and quality assurance. Keeps informed of updates to standards, regulations, and best practices. Analyzes complex engineering projects to determine design requirements, uncertainties, and constraints. Project and Task Management Assigns tasks to other technical and non-technical staff. Predominantly plans and coordinates detailed aspects of the engineering work. Prepares scopes, budgets, and schedules for assignments. Assists with proposals to provide professional services or obtain funding for engineering projects or projects. Management Responsibility Receives supervision and guidance relating to overall objectives, critical issues, new concepts, and policy matters. Receives direction on unusual conditions and developments. Mentors' direct reports and other engineers. Demonstrates professional attitudes relevant to the practice of engineering, including creativity, curiosity, flexibility, and dependability. Communication Skills Possesses advanced oral and written communication skills, including interpretation of complex technical and contractual language. Considers the needs of diverse project stakeholders. Leads project meetings and represents the organization in communications pertaining to broad aspects of engineering assignments. Analyzes and selects principles of formal communication, effective teamwork, and various pathways to developing leadership. Why GAI? At GAI, exceptional people have an exceptional place to work, grow, lead, and achieve. Explore an array of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy comprehensive benefits and feel good about being part of a collaborative team that's committed to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: Competitive salary -GAI is committed to paying market-based salaries Comprehensive benefits package including medical, vision, dental, company paid Long Term Disability, and Short-Term Disability (benefits start within 30 days of hire) New paid Maternity/Paternity/Adoption program Generous Paid Time Off and 7 paid holidays 401k company match Tuition Reimbursement Qualifications EducationBachelors of Engineering (required) Licenses & CertificationsDriver's License (required) Professional Engineer (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

We are looking for a MANUFACTURING PLANT ENGINEER to lead the maintenance team and ensure the safe and efficient operation of all manufacturing equipment and facilities. This role plays a key part in maintaining operational excellence and supporting continuous improvement initiatives. Responsibilities: Supervise and coordinate the maintenance team. Schedule and oversee all maintenance and repair activities. Conduct regular inspections of equipment and facilities. Troubleshoot and resolve equipment issues promptly. Implement and manage preventive maintenance programs. Maintain records of maintenance activities and equipment performance. Ensure compliance with safety regulations and standards. Train and develop maintenance staff. Collaborate with other departments to ensure seamless operations. Requirements: Bachelor's degree in engineering required; Mechanical Engineering preferred Proven experience as a maintenance supervisor in a manufacturing environment. Strong knowledge of mechanical, electrical, and plumbing systems. Excellent troubleshooting and problem-solving skills. Ability to read and interpret technical manuals and blueprints. Strong leadership and organizational skills. Good communication skills in English; bilingual in Spanish is a plus. Ability to work flexible hours, including weekends and holidays if needed. Benefits: Paid Vacations Paid Personal days Paid Holidays Paid Jury Duty Parental Leave Health insurance Life Insurance Vision and Dental insurance Retirement plan option Easy Foods Inc is an Equal Employment Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability status or any other protected status under federal, state or local law. Must be authorized to work for any employer in US. We are an E-Verify participant. Job Type: Full-time

The Diallo Group (TDG) is a headquartered in Central Florida, founded in 2022. TDG partners with vendors and clients to support evolving mission requirements with leading-edge skills and responsive service delivery. With a background in supporting Civil Engineer Corps requirements for multiple combatant commands, federal agencies, and theaters, we quickly re-position and customize team structures to meet current and future needs. Our capabilities span infrastructure & engineering, consulting, and business services, ensuring efficient and effective solutions for our clients. Role Description A Civil Engineer at The Diallo Group supports federal planning, engineering, and design projects by performing site/civil design and technical analysis from concept through final deliverables. Responsibilities include developing and reviewing site layouts, grading and drainage plans, utility coordination, stormwater management approaches, and erosion and sediment control strategies; preparing engineering calculations, reports, and design narratives; and supporting planning efforts such as facility assessments, master planning documentation, and MILCON package development (including 1391 support). The Civil Engineer collaborates with planners, architects, GIS staff, and subconsultants to ensure designs meet UFC, NAVFAC, and other applicable federal standards, coordinates with stakeholders to resolve infrastructure constraints and constructability issues, and contributes to quality control, schedule adherence, and proposal support as needed. Qualifications Bachelor's degree in Civil Engineering or related discipline from an accredited institution (Master's preferred). 3-10+ years of relevant civil/site design experience supporting federal, municipal, or commercial infrastructure projects. Professional Engineer (PE) license required. Demonstrated experience producing civil design deliverables including site layout, grading, drainage, utilities, stormwater management, and erosion/sediment control plans. Working knowledge of federal planning and design criteria such as UFC, NAVFAC, USACE, and applicable state/local codes. Proficiency in industry software such as AutoCAD Civil 3D (required); experience with MicroStation/OpenRoads, GIS platforms (ArcGIS), or hydrology/hydraulics tools (HEC-RAS/HEC-HMS) is a plus. Ability to develop engineering calculations, technical reports, and design narratives suitable for government review. Experience supporting planning and programming efforts such as facility assessments, master planning, and MILCON documentation (including DD1391 support) preferred. Strong coordination skills with multidisciplinary teams (planners, architects, structural, MEP, environmental) and outside agencies/utilities. Strong written and verbal communication skills, with the ability to present technical information clearly to non-technical stakeholders. Ability to manage multiple tasks, meet deadlines, and support quality control/quality assurance processes. U.S. citizenship preferred/required for many federal projects; ability to pass background checks and obtain access credentials as needed (CAC, DBIDS, etc.).

Our client is seeking a Mechanical Robotics Design Engineer who is experienced with designing industrial or commercial robots and/or tethered robotic pick and place equipment. This is an onsite role (no hybrid or remote please) located in the Greater Orlando area. Those who have basic experience programming with C++/Python is required as well as working with engineers to set up and test the same. Strong SolidWorks skills are a must have as is prototyping with 3D printing- those with a Mechatronics background is highly desired!! Great opportunity for the recent grad with internship experience of someone who is looking to grow I the field as our client is expecting long term growth for years to come! Requirements: Bachelor's or Master's degree in Engineering is required 1-5 years' experience Current SolidWorks experience- CSWP certified preferred! Must be able to work in a small team setting To learn more about this exciting opportunity apply today!

Must have the desire to grow into becoming a Project Manager The ideal candidate will be responsible for assisting the project team with project documentation and control, job cost accounting, scheduling, and construction supervision efforts. In order to be successful, this candidate should feel comfortable taking on many tasks that require various skills, and appropriately prioritizing those tasks' completion. Responsibilities: Assist with on-site management to ensure project success Ensure project plan is moving forward to meet anticipated deadlines Responsible for RFI and submittal process Processes owner billings and project related accounting issues Qualifications: 4 plus years' of experience as a Project Engineer, or Assistant Project Manager Underground utility background / experience Strong experience in Bluebeam and Microsoft Office Suite Must have the desire to grow into becoming a Project Manager

GL Staffing is seeking for a Manufacturing Engineer - Electrical with expertise necessary to design, develop, and implement manufacturing systems, processes, and tooling that support plant production activities. Salary: 70k - 80k a year (Based on experience) Location: Orlando, FL Job Duties and Responsibilities Develops test, manufacturing, and various assembly processes. Designs, develops, and maintains electrical/electronic test fixtures, jigs, and automated test equipment (ATE). Uses engineering tools and statistical concepts to maintain and continuously improve manufacturing processes. Investigates process issues and initiates corrective actions. Generates and maintains production-level documentation and operating procedures. Specifies and initiates the purchase of manufacturing tools, equipment, and supplies. Plans, specifies, and justifies capital equipment expenditures. Leads product and/or process improvement teams. Designs and develops test systems and electronic systems to support product testing and manufacturing. Collaborates closely with cross-functional engineering teams in a concurrent engineering environment. Performs other duties as assigned. Knowledge & Skills Familiarity with electronic design of test fixtures and systems is required. Hands-on role requiring interaction across multiple disciplines within a manufacturing environment. Proficiency with software applications such as Microsoft Word, Excel, and PowerPoint. Experience with AutoCAD, SolidWorks, Minitab, and Microsoft AX is preferred. Strong written and verbal communication skills are required. Education Bachelor's degree in Electrical Engineering Three (3) years of engineering experience in a manufacturing environment. Must be able to handle ITAR-controlled documents without requiring an export license. Physical Requirements & Working Environment Ability to sit and stand for extended periods. Primarily office-based work environment. Minimal lifting required. Compensation & Benefits Comprehensive medical, dental, and vision insurance. 401(k) retirement savings plan. Paid Time Off (PTO). Company-paid life insurance. Company-paid short-term and long-term disability insurance. Opportunities for career advancement and professional development. Apply now!

Join Ingenuity Engineers, Inc. as an Electrical Engineer II and become an essential part of our dynamic team! In this role, you'll work side by side with talented Project Engineers and Project Managers to craft, detailed electrical design documents. Your work will play a key role in ensuring that our projects are compliant and ready for permits. If you're passionate about shaping the future of electrical design and want to be a part of a forward-thinking team, we want to hear from you! Key Responsibilities: Understands advanced electrical theory/calculations, electrical system components and devices. Interprets codes, standards and design inputs with the ability to apply them within the design. Develops calculations, design narratives and work plans to be used as the basis of design of power, lighting and fire alarm plans, single line/riser diagrams, panel and light fixture schedules and project specifications with minimal direction. Assumes the role of Engineer of Record for own projects. Reviews the work of others and gives specific guidance to the project team to advance the design. Provides mentorship to team members with less experience and training. Applies advanced engineering principles to solve technical and coordination issues. Manages project designs and budgets with limited oversight. Attends internal and client coordination meetings, provides direction, make technical decisions and ensure project goals are achieved. Performs site visits and investigations with little or no supervision if needed and resolve any challenges encountered. Cultivates relationships with clients to foster additional projects. Enhances leadership and management abilities. Provides cross-disciplinary technical and engineering assistance. Contributes to development efforts. Refines and develops processes to improve efficiency and quality. Takes personal ownership of the work produced. Required Qualifications: Bachelor's degree with P.E. Extensive proven relevant technical and field experience. Previous Leadership experience preferred. Experience working in a professional A/E office, Consulting Firm, Construction Contractor, or equivalent. Proficiency in Revit, AutoCAD, Microsoft Office, Bluebeam and other basic software. Strong written, verbal and communication skills with the ability to participate in a collaborative team environment, including coordination with people/teams outside of the company. Comprehensive understanding of the components of mechanical, plumbing, and fire protection systems that require power, with the ability to integrate those requirements into the electrical design. Ability to sit, stand, walk for extended periods, with occasional bending and the capacity to lift up to 10 lbs. as needed. Ability to travel

Interplan is a commercial architectural and engineering firm with over 50 years of experience specializing in restaurant and retail design for large nationwide clients. With offices in Orlando and Chicago, our Orlando office is expanding, and we are seeking a talented Mechanical Designer/Engineer to join our team! Responsibilities Single point contact for engineering projects Be able to do building heating/cooling load calculations Design applicable heating/cooling systems Equipment and system specifications Do basic HVAC plans for RTU and split system design Duct sizing and diffuser selection Temperature controls Grease exhaust hood design Grease exhaust/Make-up air systems Basic general exhaust systems Responsible to permit comments Review shop drawing submittals Other duties as assigned Qualifications & Prior Experience 2 - 4 years of professional experience in design required A minimum of 2 years experience in the design of building HVAC systems required Any retail or grocery store design experience a plus Experience in the design of building HVAC systems Has lead projects in mechanical and plumbing designs Has PE or on track to get PE Knowledge/understanding of mechanical building codes Knowledge of heating and cooling load calculations, mechanical materials, systems, and their application Experience with DX, chilled water, and variable air systems Ability to run heating/cooling loads with Carrier and/or Trane programs is required Ability to produce energy code calculations required Proficiency in AutoCAD 2000 or later to produce construction documents in accordance with Interplan standards required Compensation & Benefits Open and collaborative work environment Continuing Education and Professional Development Active employee lead activities committee Medical, Dental, and Vision Insurance Short Term Disability and employer-paid Long Term Disability and Life Insurance Flex Spending and Dependent Care Accounts Employee Assistance Program Health and Wellness Program Paid Holidays Paid Time Off (PTO) 401k with Employer Match, Financial Advisor for employees on ongoing Financial Wellness Education Performance-based Bonus Program Join our team at Interplan and contribute to creating spaces that celebrate Humanity! This is a full-time in-office position with opportunities for growth and development within the company.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. We are seeking a candidate with 1-5 years of experience to join a multi-disciplinary team in our Orlando office. This role will primarily focus on plumbing design as well as other mechanical design tasks. We offer full service in-house architecture/engineering design capabilities and typically work on a diverse array of projects. This is a unique opportunity to work alongside architects and other engineers across a multitude of project types (theme parks, airports, college campuses, laboratories, and others). Duties and responsibilities: Works in the responsible charge of a licensed professional engineer Performs plumbing engineering calculations, edits specifications, and prepares design drawings Assists in developing project construction documents, including conducting site visits, producing specifications, developing drawings, sizing equipment and producing cost estimates. Coordinates with the other design disciplines in the delivery of mechanical designs Performs services during construction including responding to RFI's, reviewing submittals, and performing field observations Qualifications 1-5 years of related mechanical/plumbing design Bachelor's degree in mechanical engineering OR Certified Plumbing Designer Understanding of design and construction documents. Proficiency in REVIT. Knowledge of building codes. Self-starter with a proactive attitude Ability to prioritize tasks and meet deadlines Estimated Compensation Range and Benefits $80,000 - $90,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description As a Mechanical Design Engineer you will: Work with engineers on new product development teams Develop and revise 3D CAD models (including parts and complex assemblies) for prototype and production applications Prepare and revise technical drawings for all different types of components (machined, sheet metal, plastic / composite, tubing) and assemblies Create, perform, and review engineering change orders (ECOs) Prepare and update BOMs Prepare product specification sheets Prepare quality assurance documents Create and maintain drawing and model library in Autodesk Inventor and Vault Create and maintain Mainstream Engineering modeling and drawing standards Position Requirements BS in an engineering discipline Minimum of 2 years' experience in product related mechanical design and drafting United States citizen required due to ITAR restrictions Understanding of Engineering/Mechanical principles Knowledge of manufacturing processes Knowledge of Geometric Dimensioning and Tolerancing (GD&T) (ASME Y14.5-2009) Proficiency with Autodesk Inventor 2024 or newer Proficiency with Autodesk Vault 2024 or newer (preferred) Mainstream Engineering Corporation is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. Job Posted by ApplicantPro

DIRECT HIRE | DESIGN DRAFTER | Tavares/Leesburg, FL area Seeking a talented and detail-oriented Design Drafter with experience in structural/architectural drafting/design. Exciting opportunity to join a growing business (locations nationwide) and have access to new technologies as they pursue integrating AI technologies and advanced rendering software (fly-bys, walk-throughs, photographic-level renderings, etc.). You'll create custom building designs, photorealistic renderings, proposals, marketing collateral, and social media assets on fast-track schedules - directly impacting projects coast-to-coast while growing your skills in a collaborative, high-energy environment. Key Skills (do not have to have all): CAD, REVIT, Bluebeam, BIM, 3D Modeling, Rendering, Construction Materials, etc. **Experience with 3D renderings would be a big plus** Anticipate $50K-$70K, dependent on experience Full suite of benefits Seeking experience with Architectural and/or Structural Design/Drafting related to commercial builds Office-based role, M-F Responsibilities: Design and Drafting: Develop detailed drawings and plans for commercial buildings using AutoCAD. Collaboration: Partner with engineers, architects, and project managers to create comprehensive design solutions tailored to construction methods. Plan Review: Interpret and review project specifications, blueprints, and other technical documents specific to design. Compliance: Ensure all designs meet relevant building codes, standards, and regulations. Revisions: Update and revise drawings based on feedback from stakeholders and evolving project requirements. Documentation: Keep accurate records of all drawings, revisions, and project documentation. Requirements: Prefer Design/Drafting related degree/certifications 2+ years of experience in structural or architectural drafting/design for commercial buildings Proficiency in AutoCAD (3D), REVIT + Illustrator, SketchUp, Bluebeam, or Adobe InDesign Strong understanding of construction methods, materials, and building codes. Exceptional precision and attention to detail in drafting and design work. Excellent verbal and written communication skills. Ability to identify issues and develop effective solutions. Ability to collaborate effectively within a multidisciplinary team environment. Portfolio of design or drafting work required Keywords: Revit Designer, Architectural Renderer, 3D Visualization Specialist, Construction Graphics Designer, SketchUp Renderer, Prefab Design, Building Proposal Designer, Revit + Illustrator EEO

Job Description DIRECT HIRE | DESIGN DRAFTER | Tavares/Leesburg, FL area Seeking a talented and detail-oriented Design Drafter with experience in structural/architectural drafting/design. Exciting opportunity to join a growing business (locations nationwide) and have access to new technologies as they pursue integrating AI technologies and advanced rendering software (fly-bys, walk-throughs, photographic-level renderings, etc.). You'll create custom building designs, photorealistic renderings, proposals, marketing collateral, and social media assets on fast-track schedules - directly impacting projects coast-to-coast while growing your skills in a collaborative, high-energy environment. Key Skills (do not have to have all): CAD, REVIT, Bluebeam, BIM, 3D Modeling, Rendering, Construction Materials, etc. **Experience with 3D renderings would be a big plus** Anticipate $50K-$70K, dependent on experience Full suite of benefits Seeking experience with Architectural and/or Structural Design/Drafting related to commercial builds Office-based role, M-F Responsibilities: Design and Drafting: Develop detailed drawings and plans for commercial buildings using AutoCAD. Collaboration: Partner with engineers, architects, and project managers to create comprehensive design solutions tailored to construction methods. Plan Review: Interpret and review project specifications, blueprints, and other technical documents specific to design. Compliance: Ensure all designs meet relevant building codes, standards, and regulations. Revisions: Update and revise drawings based on feedback from stakeholders and evolving project requirements. Documentation: Keep accurate records of all drawings, revisions, and project documentation. Requirements: Prefer Design/Drafting related degree/certifications 2+ years of experience in structural or architectural drafting/design for commercial buildings Proficiency in AutoCAD (3D), REVIT + Illustrator, SketchUp, Bluebeam, or Adobe InDesign Strong understanding of construction methods, materials, and building codes. Exceptional precision and attention to detail in drafting and design work. Excellent verbal and written communication skills. Ability to identify issues and develop effective solutions. Ability to collaborate effectively within a multidisciplinary team environment. Portfolio of design or drafting work required Keywords: Revit Designer, Architectural Renderer, 3D Visualization Specialist, Construction Graphics Designer, SketchUp Renderer, Prefab Design, Building Proposal Designer, Revit + Illustrator EEO

Description: Objective Mack Industries is looking for a Precast Concrete Drafter to assist in the technical efforts necessary to support our sales, production, and product development departments. The main focus of this position will be to develop detailed shop drawings of precast concrete products and preparing bid submittal packages for customers. Paid Weekly Essential Functions Prepare project shop drawings to present to the customer for approval Completes submittals for customer approval Engages directly with customers to ensure specifications and lead time are met Works alongside sales and production teams contributing efforts where needed Maintains project flow, following targets as established by the Engineering Manager Communicates effectively with General Contractors, Field Personnel, Architects, Engineers and other departments to facilitate project outcomes and competition Utilizes Stack IT, AutoCAD, and 3-D software to create detailed shop drawings for fabrication Utilizes ERP Software to import orders, enter order lines. Requirements: Minimum Qualifications Associates or Bachelor's degree in Civil Engineering Technology or related field preferred Knowledge in precast manufacturing and construction processes a plus Construction experience a plus Proficient in AutoCAD Proficient in Microsoft Office Applications (Excel, PowerPoint, Word, Outlook, etc) Strong written and verbal communication skills Strong mathematics and science abilities a plus Valid driver's license with a clean driving record Behavioral Traits Willingness to work collaboratively within a team Customer focused, attentive and responsive. Proactive and independent with the ability to take initiative Shows good judgement in difficult situations Organized with attention to detail Shows accountability for efforts and results Environment Conditions and Physical Strain Due to the nature of the operation, the levels of noise, dust and dirt can be high. Must be able to lift up to 50 lbs., on occasion Must be able to stand for extended periods of time Must be able to squat, crawl, climb and kneel to complete tasks This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice. Mack Industries, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

Job Description Optimal Solutions & Technologies (OST, Inc.) is focused on excellence. We specialize in providing Management Consulting, Information Technology, and Research Development and Engineering services. The fundamental distinction of the OST team is its business knowledge in both the public and private sectors. We serve the aerospace & transportation, association & nonprofit, defense, education, energy, financial, healthcare, and technology & telecommunications industries. OST is successful because we listen to our clients, we learn from our clients, and we know our clients. Sr. Aerospace Engineer Description of specific duties in a typical workday for this position: The Aerospace Engineer provides engineering support for aerospace systems and subsystems in support of DoD aviation and training programs. The engineer supports the analysis, design, integration, testing, validation, airworthiness, and sustainment of aircraft, aviation subsystems, and associated Training Aids, Devices, Simulators, and Simulations (TADSS). Responsibilities include supporting development and review of aerospace system requirements, specifications, and technical architectures; conducting performance, safety, and airworthiness analyses; supporting test planning, execution, and evaluation activities; and assisting with Government Acceptance Testing (GAT) and On-Site Acceptance Testing (OSAT). The Aerospace Engineer participates in reviews of design baselines, drawings, and technical data packages and supports configuration management and change control activities. The role supports analysis of flight performance, aerodynamics, structures, propulsion, avionics integration, and environmental factors as applicable. The Aerospace Engineer assists in development and review of technical documentation, engineering assessments, and reports; supports preparation and evaluation of Engineering Change Proposals (ECPs) and Value Engineering Proposals (VEPs); and participates in hardware and software quality assurance activities to ensure compliance with DoD, Army, and airworthiness requirements. Requirements (Years of experience, Education, Certifications): Bachelor's degree in Aerospace Engineering or a closely related engineering discipline (Mechanical, Aeronautical, Systems Engineering) 10 years of experience performing aerospace or aviation engineering in support of military, DoD, or aviation programs Demonstrated experience in one or more of the following areas: Aircraft systems engineering and integration Aerodynamics, flight performance, or propulsion analysis Airworthiness and safety assessments Aerospace testing, validation, and acceptance support Review of technical drawings, specifications, and data packages Configuration management and engineering change support Active Secret security clearance is required Nice to Have (skills that are not required, but nice to have): Master's degree in aerospace engineering or a related discipline Experience supporting Army aviation platforms (e.g., UH-60, AH-64, CH-47, Huey II) Familiarity with: DoD 5000 series and Defense Acquisition Guidebook Airworthiness release processes Aviation standards and military specifications Certifications or training in: Systems Engineering (INCOSE) Six Sigma / Lean Test & Evaluation or airworthiness disciplines This is a full-time position paying a base salary, full benefits, and has possible bonus potential based on merit and performance. To be considered for this position, please apply online with a resume. OST is an equal opportunity employer. Applicants are considered for positions without regard to race, religion, gender, native origin, age, disability, or any other category protected by applicable federal, state, or local laws.

Optimal Solutions & Technologies (OST, Inc.) is focused on excellence. We specialize in providing Management Consulting, Information Technology, and Research Development and Engineering services. The fundamental distinction of the OST team is its business knowledge in both the public and private sectors. We serve the aerospace & transportation, association & nonprofit, defense, education, energy, financial, healthcare, and technology & telecommunications industries. OST is successful because we listen to our clients, we learn from our clients, and we know our clients. Sr. Aerospace Engineer Description of specific duties in a typical workday for this position: * The Aerospace Engineer provides engineering support for aerospace systems and subsystems in support of DoD aviation and training programs. The engineer supports the analysis, design, integration, testing, validation, airworthiness, and sustainment of aircraft, aviation subsystems, and associated Training Aids, Devices, Simulators, and Simulations (TADSS). * Responsibilities include supporting development and review of aerospace system requirements, specifications, and technical architectures; conducting performance, safety, and airworthiness analyses; supporting test planning, execution, and evaluation activities; and assisting with Government Acceptance Testing (GAT) and On-Site Acceptance Testing (OSAT). The Aerospace Engineer participates in reviews of design baselines, drawings, and technical data packages and supports configuration management and change control activities. * The role supports analysis of flight performance, aerodynamics, structures, propulsion, avionics integration, and environmental factors as applicable. The Aerospace Engineer assists in development and review of technical documentation, engineering assessments, and reports; supports preparation and evaluation of Engineering Change Proposals (ECPs) and Value Engineering Proposals (VEPs); and participates in hardware and software quality assurance activities to ensure compliance with DoD, Army, and airworthiness requirements. Requirements (Years of experience, Education, Certifications): * Bachelor's degree in Aerospace Engineering or a closely related engineering discipline (Mechanical, Aeronautical, Systems Engineering) * 10 years of experience performing aerospace or aviation engineering in support of military, DoD, or aviation programs * Demonstrated experience in one or more of the following areas: * Aircraft systems engineering and integration * Aerodynamics, flight performance, or propulsion analysis * Airworthiness and safety assessments * Aerospace testing, validation, and acceptance support * Review of technical drawings, specifications, and data packages * Configuration management and engineering change support * Active Secret security clearance is required Nice to Have (skills that are not required, but nice to have): * Master's degree in Aerospace Engineering or a related discipline * Experience supporting Army aviation platforms (e.g., UH-60, AH-64, CH-47, Huey II) * Familiarity with: * DoD 5000 series and Defense Acquisition Guidebook * Airworthiness release processes * Aviation standards and military specifications * Certifications or training in: * Systems Engineering (INCOSE) * Six Sigma / Lean * Test & Evaluation or airworthiness disciplines This is a full-time position paying a base salary, full benefits, and has possible bonus potential based on merit and performance. To be considered for this position, please apply online with a resume. OST is an equal opportunity employer. Applicants are considered for positions without regard to race, religion, gender, native origin, age, disability, or any other category protected by applicable federal, state, or local laws.