Design engineer jobs in Washington

- CAD Engineer RATE- $50/hr Job descriptions: - 10+ years of experience required EDA Semiconductor Design Enablement Responsible for supporting and optimizing Electronic Design Automation (EDA) tools and flows used in silicon design. This role bridges design teams and infrastructure, ensuring high availability, performance, and scalability of CAD environments across front-end and back-end workflows.

Kodiak is seeking a resourceful individual with broad knowledge and understanding of HVAC and related systems to join our team as a Mechanical Design Engineer. You will be responsible for performing a wide range of HVAC activities for commercial and industrial customers. We are looking for someone who can contribute, grow, think, and create. This is not a remote position. Candidates must live within a reasonable commute distance to our office in Tacoma, WA (or plan to relocate prior to hire date). SALARY RANGE: $150,000 to $165,000 per year JOB FUNCTIONS AND DUTIES (other duties may be assigned) Work with Sales and Project Managers to provide timely field-related design solutions for our customers Analyze customer specifications and performance requirements to determine mechanical designs Assist with budgets, pre-contract designs and presentations Active participant in all aspects of system design process: research, design, load calculations for system sizing, layout, sizing of components, equipment selection Manage projects with both internal and external deadlines and changing time constraints Design all details for construction required elements for installation Assure all code requirements are met providing necessary information for permit application Produce O&M's, Commissioning and other documents required for project communication and completion Perform site surveys as required to verify details necessary for complete and accurate design Monitor design standards and implement/practice quality control EDUCATION AND EXPERIENCE BS in Mechanical Engineering or related field Three years related experience in HVAC or construction industry Related experience in plumbing design preferred, but not required Equivalent combination of education and experience is acceptable Working knowledge of Microsoft Office products, CAD, Revit a plus OTHER QUALIFICATIONS Familiarity with HVAC principles and technical applications Ability to comprehend and implement applicable HVAC related federal, state and local laws, codes and regulations Read, analyze, and interpret information including blueprints, drawings, and equipment specifications Strong verbal and written communication skills Effectively present information and respond to questions from internal and external clients Highly motivated team player with the ability to positively work with others Self-motivated with strong interpersonal skills, achievement oriented, excellent problem solving, time management, organizational, and relationship building skills CERTIFICATES, LICENSES, REGISTRATIONS Valid Driver's License Professional Engineer (PE) License preferred, but not required PHYSICAL DEMANDS & WORK ENVIRONMENT Frequently required to sit, stand, walk, talk, hear, see, and use hands to operate computer keyboard, mouse, and telephone Occasionally lift and/or move up to 25 pounds Typical office environment with occasional visits to other offices and commercial/industrial business environments Noise levels in our office are low to moderate, other sites may have moderate to high noise levels Daily job stress runs from minimal to high, based on varying factors of site considerations, time constraints, travel requirements, and customer needs Reasonable accommodation may be made to enable those with disabilities to perform the essential functions of this position Benefits Offered: Medical, dental, and vision insurance with company premium contribution Company paid basic life insurance, long-term disability, and three Employee Assistance Programs [EAP] Voluntary [employee paid] short-term disability, additional life insurance, and AFLAC 401K and Roth retirement plans with employer matching funds Flexible Spending Accounts and Health Savings Accounts available 7 paid holidays per year 80 hours vacation pay, accrued by hours worked and available after 90 days [Accrual increases after 5 and 10 years of service] 48 hours paid time off per year [prorated for first year of employment] Vehicle Allowance Discretionary bonuses

Engineering Line Lead Jubilant HollisterStier LLC, a well-established member of the business community in Spokane, Washington, provides a complete range of services to support the pharmaceutical and biopharmaceutical industries. The Allergy business is a worldwide leader in the manufacture of allergenic extracts, targeted primarily at treating allergies and asthma. Jubilant HollisterStier is also a nationally recognized contract manufacturer of sterile injectable vials, and lyophilized products. Jubilant HollisterStier is a proud member of the Jubilant Pharma family. Our Promise: Caring, Sharing, Growing We will, with the utmost care for the environment and society, continue to enhance value for our customers and stakeholders by providing innovative products and economically efficient solutions' through growth, cost effectiveness and wise investment of resources. Job Description: The CMO Engineering Line Lead position provides leadership, manufacturing support and coordination of the engineering department for the CMO line specific projects. This position ensures that contract projects, equipment functionality, compliance support, and capital expenditures are executed per Jubilant HollisterStier management initiatives, compliance guidelines, the JHS project management system, and the capital budget schedule. It is the responsibility of this position to ensure line specific compliance of the CMO equipment and team with state, local, and federal regulations. This position ensures operations and projects are carried out under adherence to GEPs and cGMPs. Responsibilities: Provide technical oversight and leadership to the engineering team roles responsible for their area of responsibilty within the CMO Business Unit. Drive technical improvements and internal/external responses to equipment and facility observations. Management of the assigned capital project schedules and budgets. Assign and oversee engineering projects including internal capital, compliance, and contract manufacturing. Coordinate and supervise engineering resources to ensure adequate and appropriate staffing for current and upcoming projects. Ensure designated area, equipment,and engineering infrastructures are compliant to local, state, federal, and international regulatory agencies. Execute high level projects from conception, consistent with upper management objectives for business growth. Manage and execute facility and equipment updates to meet company growth and economic objectives. Support client audits and technical visits. Effectively communicate project status, constraints and current or potential issues to upper management. Qualifications: BS in: Mechanical, Chemical, Electrical, Manufacturing, or similar engineering discipline 3+ years of related experience Pharmaceutical experience FDA regulated Industry experience Facility engineering experience Office (Word, PowerPoint, Excel, AutoCAD & SAP) Ability to work independently without routine instructions. Preferred Qualifications: Supervisory experience Shift: Day Compensation: The salary range for this position is $103,050 - $151,100 depending on experience. Midpoint and above is reserved for employees who have longevity with Jubilant HollisterStier and consistently exhibits outstanding performance over a period of time in the role Benefits: Medical, Dental, Vision, Flexible Spending and Health Savings Accounts Life, AD&D, Short and Long Term Disability 401(k) with company match Generous paid time off plan Employee Assistance Program Optional Benefits: Voluntary Life and AD&D for employee & family Supplemental Medical coverage (Critical Illness, Hospital Indemnity and Accident coverages) Pet Insurance ID Theft Protection Perk Spot Discount Program Jubilant HollisterStier is a great place to grow! If you're up for a rewarding challenge, we invite you to take the first step and apply today! *************************************************** *Please click on the Spokane, WA link* Jubilant HollisterStier is an EEO/AA Employer. All qualified applicants will receive consideration for employment without regard to their protected veteran status and will not be discriminated against on the basis of disability. If you require assistance applying for a position, please contact our HR Department at: ******************************

Title: Service Engineer - Cloud Security & Azure Service Fabric Worksite: Onsite About WCT WCT is a global talent solutions partner committed to delivering high-impact technology and engineering talent to some of the world's most innovative companies. As a WCT employee, you will be part of a dynamic, growth-oriented culture that values collaboration, continuous learning, and excellence in execution. Role Overview You'll implement and manage changes across Service Fabric clusters, cloud services, and adjacent infrastructure to achieve high reliability, security/compliance alignment, and operational excellence. The role emphasizes automation, secure deployments via ADO (YAML) pipelines, secret rotations, geo expansion (including sovereign cloud), and modernization-migrating legacy workloads, consolidating services to improve cost, and simplifying architecture (distributed systems troubleshooting is key). What You'll Do Own health, configuration, and change management for multi region Azure Service Fabric clusters; author rollout/upgrade templates and monitor with Azure Monitor/Application Insights/Geneva. Build, maintain, and harden Azure DevOps (ADO) YAML pipelines; manage libraries, variable groups, service connections, certificates, and secrets; eliminate PATs/local authorities by adopting workload identity. Provide support for S360 and SFI platforms, ensuring compliance and reliability across integrated workflows enabling Security initiatives like securing azure resources(through IaC), securing build/deployment pipelines, enabling modern security practices and mitigating application security concerns raised by Microsoft as best practices etc. Drive geo expansion and sovereign cloud enablement; design traffic flows with Azure Front Door (Premium), Traffic Manager, DNS; prepare IPv6 ready ARM/Bicep templates. Lead modernization such as Service Fabric → AKS transitions, service consolidation, and cost optimization (rightsizing, reserved instances, eliminating waste). Troubleshoot distributed systems end to end (service model, deployment, networking, data); debug C#/.NET services; and resolve Cosmos DB issues where needed. Document runbooks/operational standards; automate with PowerShell; uphold security/compliance best practices and change control. What You'll Bring 5+ years in Azure engineering/SRE/DevOps working on distributed systems and cloud automation. Hands on expertise with Azure Service Fabric (stateless/stateful apps, node types, cluster upgrades) and ADO YAML pipelines. Proficiency in scripting (PowerShell); working knowledge of C# for service/debug scenarios. Experience with observability tooling (Azure Monitor, Application Insights, Geneva) and Kusto for diagnostics. Experience in security initiatives like securing azure resources(through IaC), securing build/deployment pipelines, enabling modern security practices and mitigating application security concerns raised by Microsoft as best practices etc. Familiarity with compliance frameworks (e.g., ISO 27001, SOC 2; HIPAA/GDPR as applicable). Nice to have: AKS/Kubernetes, 1ES/OneBranch/1CDN, Azure networking (AFD, Traffic Manager), Cosmos DB. IaC (ARM/Bicep) Compensation / Salary Range The typical pay for this role across the U.S. is USD 90,000 yearly to USD 110,000 yearly. Factors that may affect pay within or outside of this range may include but are not limited to geography or market, skills, education, experience, and other qualifications of the successful candidate. Benefits Medical, dental, vision, life, PTO, holidays, 401(k) benefits, and ancillaries may be available for eligible WCT employees and may vary depending on the nature of your employment. WCT will accept applications, and process offers for this role until the role is closed. Equal Employment Opportunity Declaration WCT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex including pregnancy, sexual orientation, or any other characteristic protected by applicable laws, regulations, and ordinances.

:: About Crown: CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture, and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers, and consumers alike. With operations in 39 countries employing approximately 23,000 people and net sales of approximately $12 billion, we are uniquely positioned to bring the best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated, and driven individuals. Division Overview: Crown's Beverage Division manufactures a variety of packaging solutions for soft drinks, craft beers, coffees and teas as well as new energy drinks. Crown Beverage leads the packaging industry with innovative technologies that redefine how the world looks at beverage cans. With a large printable surface area and a wide range of sizes, shapes and decorating options, our aluminum cans are the perfect packaging format to create compelling brand presence where it counts. Here is your chance to join the Crown Beverage Division. Location: Olympia Position Overview: The Electrical Supervisor works closely with all aspects of the manufacturing process from the raw material to the finished product and support daily productions activities. This is a supervisory position, which would include the daily supervision of plant electricians as well as the management of plant construction, modifications, appropriations and equipment installation. Duties And Responsibilities: Reporting directly to the Plant Engineer, the Electrical Supervisors responsibilities would include, but not be limited to, the following: Applies electrical theory and related knowledge to test and modify developmental or operational electrical machinery, electrical control equipment and circuitry in industrial plant setting Oversees assembly and testing of experimental motor control devices, switch panels, transformers, generator windings, and other electrical equipment and components according to engineering data and knowledge of electrical principles Diagnoses cause of electrical or mechanical malfunction or failure of operational equipment and performs preventative and corrective action Develops diagrams, drawings and specifications for modifications or expansions and directs personnel performing routine installation and maintenance duties Plans, directs and records periodic testing; recommends or initiates modification or replacement of equipment as needed Directs, coordinates, develops, trains, coaches and assesses employees Supports and encourages employees to work safely, efficiently and effectively Performs other job-related duties as required or assigned Qualifications: In addition to the specific responsibilities listed above, the ideal candidate will possess the following: Minimum Requirements Bachelor's level new graduate in Engineering or equivalent discipline with two or more related co-op or internship work assignment in a manufacturing setting would be an alternate for the 5-7 years of work experience. Three to five years of experience in a high-speed manufacturing environment At least two years of proven supervisory experience Working knowledge of motor controls, VFD's, and DC drives. Installation, set-up and programming of PLC's Ability to design, modify and plot using AutoCAD software Process control systems - set-up and program applications (Honeywell) Instrumentation and calibration knowledge Facility power distribution Knowledge of building facilities (compressed air, water, hydraulics, vacuums, heating and cooling) Knowledge of control systems and sub-systems Must be available to work various shifts if needed and be able to work nights, weekends, and overtime to cover absences or provide additional support Approximately 5% overnight travel Preferred Requirements Packaging industry experience Electrical Journeyman's certification Green or black belt certification in Six Sigma Competencies Ability to work independently or with a team Strong problem-solving skills through an individual and/or collaborative approach Strong people and teamwork skills. Candidate should be able to demonstrate and articulate relevant experience in collaboration and team support. Must be able to look at new solutions and "think outside the box" Effective leadership skills such as conflict resolution, communication, decision making, etc. Demonstrated employee relations skills and the ability to motivate people Excellent time management and project management skills as well as the ability to multi-task Excellent oral and written communication skills Strong computer skills and working knowledge of various Microsoft programs (Excel, Word, Access, etc.) The ideal candidate will have a strong commitment to safety, quality and the knowledge of industrial electrical systems and devices, a positive attitude and a willingness to learn. Mechanical aptitude, knowledge and skills are key to this positions. Physical Requirements While performing the duties of this job, the associate is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl The associate may lift and/or move up to 10 pounds Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus Working Conditions Generally works in a plant environment but will be required to perform some job duties inside a typical office setting While performing the duties of this job, associate will be exposed to power sources While performing the duties of this job, the associate may be exposed to moving mechanical parts and vehicular traffic The associate may be exposed to a wide range of temperatures The noise level is frequently loud Possible Equivalent Military Titles Electronics Technician; Radar and Sonar Operator; Electronic Instrument and Equipment Repairer; Communications Equipment Operator; Avionics Technician *Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Salary range for this position is: $103,869 - $127,523 *Actual salary will be determined based on skill and experience level* Benefits: Crown offers competitive pay, comprehensive benefits including free company paid health insurance for employees as well as company matched 401(k).

Holmberg Mechanical is currently seeking a confident, passionate, highly motivated, and organized Project Engineer/Coordinator. The ideal candidate will have demonstrated organizational skills, the ability to multi-task, show a friendly & positive attitude, with a professional demeanor while maintaining a high level of productivity and integrity. The candidate's primary responsibility is to provide onsite project management. Working under the direction of a Project Manager, the successful candidate will work to implement key construction initiatives, ensure organization and consistency throughout the department and take ownership of all related issues and resolutions. Why Holmberg? Our culture! If you are looking for a fun place to thrive, Holmberg Mechanical is for you. We've made Puget Sound Business Journal's Best Places to Work List seven times, our CEO was named “Most Admired CEO” by the PSBJ in 2020, and we made Inc. Magazine's “5000 Fastest Growing Companies” List in 2019 and 2020. We have been in business since 1949 and are one of Washington state's oldest union plumbing companies. We are dedicated to helping our community with numerous events to support local non-profit organizations. We choose to pursue projects in our area that matter to us. If you would like to work with experts in the industry, on projects that matter to local people, in an inspiring environment, with room for growth and promotion, let's talk. Job Function/Responsibilities -Work as a team member with the project team and assist the Project Manager with management support. -Assist in the development and maintenance of construction project schedules, CPM schedule development, and standardization -Document control & organization, generate submittals & RFIs, prepare subcontracts, and manage subcontractors -Procurement of material, support of cost engineering, support of equipment buyouts, estimating support, support marketing & sales, and assist with project billings -Developing mutually successful relationships with clients Qualifications -Two years minimum as a Project Engineer/Assistant Project Manager. -Available to work flexible hours, an average of 40 hours per week standard, or as needed. -LOCAL CANDIDATES ONLY Skills and Requirements - Strong technical problem-solving ability. - Knowledge of Microsoft and Office Software. - Solid project management skills and methods. - Solid understanding of mechanical and plumbing systems. - BlueBeam Revu & Smartsheet a plus. Compensation is between $70,000 to $85,000 annually plus a competitive benefits package. Holmberg Mechanical is an Equal Opportunity Employer, offering qualified applicants' consideration for employment without regard to race, color, religion, sex, physical or mental disability, age, citizenship, pregnancy, genetic information, veteran status, gender identity, gender expression, sexual orientation, national origin, and any other protected status. Learn more about us at *******************

SUMMARY DESCRIPTION: This position serves as support for operations on the jobs in which they are involved. Responsibilities range from participation in initial project set up and buyout, cost spread/estimate familiarity, job quantity tracking, on-site daily activity involvement, concrete material tracking, equipment and manpower productivity tracking, invoice approval, extra work ticket tracking, participation in job cost reporting, project safety compliance, quality control compliance, production analysis/tracking. This position will require travel to jobsites, 50% travel is likely. Compensation and Benefits Competitive Annual Salary based on qualifications, skills, training, experience, and location. Discretionary Annual Bonus: Subject to company performance and individual contribution. Comprehensive Benefits Package Including: Medical, Dental and Vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! SPECIFIC RESPONSIBILITIES: • Project safety compliance • Job cost spread and estimate familiarity • Participation in project sequencing and scheduling • Project quantity/progress tracking • Production analysis/tracking • Participation in Project cost reporting • Invoice coding and approval • Material/equipment procurement • Change order request issuance/tracking • Coordination with GC/Owner • Coordination with CSI Operations manager regarding manpower/resources JOB SPECIFIC COMPETENCIES/BEHAVIORS: • Communicates well both verbally and in writing, creates accurate and punctual reports, delivers presentations, shares information and ideas with others, has good listening skills • Ability to identify, assimilate and comprehend the critical elements of a situation to extract and interpret implications of courses of actions to attend to details of a problem. • Effectiveness in planning and controlling work, motivating and developing subordinates, improving work methods and results, encouraging and supporting suggestions for work improvements, etc. • Breaks down problems into smaller components, understands underlying issues, can simplify and process complex issues, understands the difference between critical details and unimportant facts. • Plans for and uses resources efficiently, always looks for ways to reduce costs • Is attentive to detail and accuracy, is committed to excellence, looks for improvements continuously, monitors quality levels, finds root cause of quality problems, owns/acts on quality problems. • Ability to monitor construction schedules and advise on potential setbacks or issues. • Communicates expectations and importance of safety. Follows up and insures safety audits are completed accurately and timely. Identifies critical issues and assists in the development of improvement procedures. Education/Experience/Attributes/Requirements • 0-5 years of experience • Bachelors degree in Construction management or Engineer recommended. • Basic/General knowledge of construction principles/practices required • Excellent problem-solving skills, with an adaptable and flexible style in working with all types of individuals • Energetic and highly motivated with a strong sense of urgency • Highly entrepreneurial and self-motivated, with the ability to work equally well on own as well as in a team environment. • Ability to walk the job site, climb ladders, and multi floor scaffolding. About Us Concrete Strategies Inc. (CSI) is a full-service national concrete contractor with the in-house resources and expertise to safely self-perform a wide variety of commercial construction including all aspects of cast in place concrete, precast erections, and concrete restoration. CSI began as Clayco Tilt-Up in 1988. In 2005, our services expanded, and we re-branded the company to showcase the additional offerings. Our 30 years in the business have enabled us to learn and refine our craft to meet the current market needs. Why Concrete Strategies? We provide the integrated services our clients expect, achieving Construction Success through: • Economical Pricing • Safe Jobsites • Efficient, On-time Delivery • High-quality, Innovative Results National Presence SEATTLE - PHOENIX - KANSAS CITY - ST. LOUIS - PENNSYLVANIA - DES MOINES Engineering News Record Rankings #8 Top 20 Firms in Concrete #102 Top 600 Specialty Contractors #26 Midwest Specialty Contractors #3 Midwest Top Specialty Contractors by Sector - Missouri #2 Midwest Top Specialty Contractors by Sector - Concrete The Company is an Equal Opportunity Employer. The Company hires individuals on the basis of their qualifications and ability to complete the essential requirements and responsibilities of the job to be filled. It is our policy to grant equal employment opportunities to qualified persons without regard to race, color, national origin, sex, sexual orientation, gender identity/gender expression, religion, pregnancy, parental status, marital status, age, veterans' or military status, regardless of how discharged, or physical or mental handicap or disability, genetic information, or other classification protected by applicable federal, state or local laws. The Company will provide equal opportunities in employment and take affirmative action as necessary in all aspects of the employment relationship, including without limitation, recruiting, hiring, compensation, promotion, working conditions, benefits and all other privileges, terms and conditions of employment. All employment decisions are made based on availability, qualifications, ability, merit and/or other legitimate factors consistent with principles of equal employment.

TITLE: MCFR Mechanical Design Engineer TerraPower is a nuclear technology company based in Bellevue, Washington. At its core, the company is working to raise living standards globally through a more affordable, secure and environmentally friendly form of nuclear energy along with innovations in medical isotopes to improve human health. In 2006, TerraPower originated with Bill Gates and a group of like-minded visionaries who evaluated the fundamental challenges to raising living standards around the world. They recognized energy access was crucial to the health and economic well-being of communities and decided that the private sector needed to take action and create energy sources that would advance global energy deployment. TerraPower's mission is to be a world leader in new nuclear technologies, while developing innovators and future leaders in the nuclear field. As a result, the company's activities in the fields of nuclear energy and related sciences are yielding significant innovations in the safety and economics of nuclear power, hybrid energy and medical applications - all for significant human health benefits. TerraPower is seeking to hire highly motivated and forward-thinking professionals who are interested in focusing on advanced nuclear reactor research and development and influencing change within the nuclear power landscape and bringing forward the critical production of medical isotopes. TerraPower is an Equal Opportunity Employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state, or local law. In addition, as a federal contractor, TerraPower has instituted an Affirmative Action Plan (AAP) in an effort to proactively recruit, hire, and promote women, minorities, disabled persons and veterans. TerraPower's Molten Chloride Fast Reactor (MCFR) program is commercializing the technology to operate a fast spectrum, chloride salt cooled molten salt reactor. The Molten Chloride Reactor Experiment (MCRE) is slated to be the first liquid-fueled, fast spectrum reactor built and operated and will be constructed at Idaho National Laboratory. MCFR Mechanical Design Engineer TerraPower is seeking a Mechanical Design Engineer to support the MCFR program and MCRE project. This position reports to the MCFR Mechanical Design Discipline Management. The role centers on structural and mechanical design and drafting, beginning with MCRE and evolving toward the design of future advanced reactors. You'll collaborate with system leads, group leads, and other discipline groups in a high-performing, multi-disciplinary environment to deliver mechanical design solutions for MCFR. This role is Hybrid with 4 days in onsite. Join us in this mechanical design role to help advance a first-of-a-kind nuclear reactor towards commercial development. Responsibilities: * Coordinate input and requirements from the engineering and project team to produce mechanical/structural design solutions * Create 3D CAD models optimized for future design changes, engineering drawings, and downstream uses * Create engineering drawings, adhering to ASME 14.1 and Y14.5 standards * Perform hand calculations and finite element analysis for design options * Provide planning and schedule input for design activities * Present mechanical design results for design reviews * Assess technical merit of solutions provided by team members Key Qualifications and Skills: * B.S. degree in Mechanical Engineering or equivalent. Experience level may be partially substituted for advanced degree depending on position relevance o Minimum 4 years of relevant experience for Level 9 o Minimum 6 years of relevant experience for Level 10 * Proficiency with CAD using SolidWorks * Fundamental understanding of mechanical analysis software (ANSYS preferred) * Understanding of ASME Y14.1 drawing development/review and ASME Y14.5 principles and application * Skilled in detail-oriented review of drawings, documents, and calculations to ensure consistency, precision, and technical rigor * Understanding of fabrication operations including machining, welding, heat treatment, and inspections * Experience with bolted joint design/calculation, welded joint design/calculation, and design for thermal gradients (highly desired) * Familiar with AISC building codes and design of building-like structures (highly desired) * Excellent communication skills, both written and oral * Creative thinking with strong analytical/problem solving skills * Ability to work multiple tasks concurrently with minimal direction * The successful candidate will possess a high degree of trust and integrity, communicate openly and display respect and a desire to foster teamwork. Job Functions: Job Functions are physical actions and/or working conditions associated with the position. These functions may also constitute essential functions for the job which the employee must be able to fulfill, with or without accommodation. Information provided below is to help describe the job so that the applicant has a reasonable understanding of the job duties/expectations. An applicant's ability to perform and/or tolerate these actions and conditions will be discussed and workplace accommodations may be made on a case-by-case basis following an individualized assessment of the applicant and other considerations, including but not limited to any governing safety standards. * Motor Abilities: Sitting and standing for extended periods, bending/stooping, grasping/gripping, fine motor control (hands). * Physical exertion and/or requirements: Minimal, with ability to safely lift up to 50 pounds. * Repetitive work: Prolonged. * Special Senses: Visual and audio focused work and ability to perform role in personal protective equipment. * Work Conditions: Stairs, typing/keyboard, standard and/or sitting working environment of >8 hrs./day. * Travel: 0% - 10% TerraPower's technology is controlled for export by various agencies of the U.S. Government. TerraPower must evaluate applicants who are foreign nationals (other than asylees, refugees, or lawful permanent residents) in accordance with U.S. Government export control requirements. To facilitate TerraPower's export control reviews, you will be asked as part of the application process to identify whether you are a U.S. Citizen or national, asylee, refugee, or lawful permanent resident of the United States. Government export authorization approval times vary. Based on the business needs for a particular position, TerraPower may not consider a foreign national from a country if it is impracticable to obtain timely Government export approval. Job Details: Salary Range Level 9: $102,804 - $154,206 Salary Range Level 10: $117,922 - $176,833 * Typically, our employee salaries are within .90 - 1.0 of the mid-point of the posted salary bands. Any salary offered within the posted salary band is based on market data and commensurate with the selected candidate's qualifications and experience. This range is specific to Washington State. Benefits: * Competitive Compensation * Salary, eligible to participate in discretionary short-term incentive payments * Comprehensive Medical and Wellness Benefits for family or individual o Vision o Dental o Life o Life and Disability o Gender Affirmation Benefits o Parental Leave * 401k Plan * Generous Paid Time Off (PTO) o 21 days of annually accrued PTO * Generous Holiday Schedule o 10 paid holidays * Relocation Assistance * Professional and Educational Support Opportunities * Flexible Work Schedule TerraPower Career and Benefits information: **********************************************

**P2S** stands as a provider of professional engineering services to a broad range of markets, including higher education, healthcare, ports/harbors, industrial, entertainment, commercial, laboratories, municipal, and federal sectors. Our specialties include electrical, mechanical, plumbing, fire protection, and technology integration. Our offered services range from engineering and commissioning to construction management. With over 300 dedicated employees, P2S is an internationally recognized leader in many of the key markets we serve. We provide a blend of innovation and technical excellence in delivering green solutions that enhance and sustain the built, natural, and social environments. Currently, we have offices in Long Beach, Seattle, Irvine, San Diego, Los Angeles, and San Jose. Are you a Mechanical Design Engineer with 5-10 years of experience looking to grow your career? P2S is an award-winning engineering firm that has been named a "Best Place to Work" for the past 15 years. Employment Type: Full-time Hybrid Schedule: 3 days In-office / 2 Remote Salary Range: $120,000- $150,000 (dependent on experience) Level: Mid Office: Seattle, WA, Long Beach, CA, Sacramento, CA, Irvine, CA **Position Summary** We are seeking an experienced Mechanical Design Engineer specializing in HVAC system design to join our engineering team. The ideal candidate will have 5-10 years of experience in the design and coordination of HVAC systems for commercial, institutional, and industrial buildings. This position involves leading mechanical design efforts, managing projects from concept through construction, and collaborating closely with architects, owners, and other engineering disciplines to deliver high-quality, coordinated designs. **Key Responsibilities** + Lead and perform HVAC system design, including load calculations, equipment selection, and ductwork/hydronic system layout. + Prepare and review drawings, specifications, and technical documentation in accordance with project and code requirements. + Coordinate designs with architectural, structural, electrical, and plumbing disciplines to ensure fully integrated building systems. + Conduct field surveys, evaluate existing mechanical systems, and develop retrofit or upgrade solutions. + Support project development from concept design through construction administration, including responding to RFIs and reviewing submittals. + Collaborate with clients and project managers to define scope, schedule, and budgets for mechanical portions of projects. + Mentor junior engineers and designers, providing technical guidance and quality assurance reviews. + Stay current with applicable building codes and industry standards. + Participate in internal design reviews, QA/QC processes, and project closeout documentation. **Qualifications** + Bachelor's Degree in Mechanical Engineering. + Professional Engineer (PE) license or ability to obtain within 12 months (preferred). + 5-10 years of progressively responsible experience in HVAC design within a consulting engineering or design-build environment. + Proficiency in Revit, AutoCAD, and HVAC load calculation software (e.g., Carrier HAP, Trane TRACE). + Strong understanding of HVAC system types (VAV, DOAS, hydronic systems, chilled/hot water plants, VRF, etc.). + Familiarity with energy modeling, sustainability, and LEED/ASHRAE 90.1 compliance (preferred). + Excellent written and verbal communication skills; ability to lead technical discussions with clients and project teams. + Demonstrated ability to manage multiple projects and meet deadlines in a collaborative environment. **Additional Preferred Skills** + Experience with healthcare, laboratory, higher education, or mission-critical facilities. + Knowledge of specification writing and Division 23 standards. + Basic understanding of building automation systems and controls integration. + Field experience with commissioning or construction administration. \#LI-CC1 #LI-Hybrid **What sets P2S apart?** For 15 years in a row, P2S has been regarded as a "Best Place to Work" by our employees. Why? Because we value satisfied employees just as much as satisfied clients. With competitive benefits, flexible work schedules, paid training/professional memberships, and more. - we aim to attract the best talent and keep them here Learn more about what it means to work at P2S: *************************** _P2S is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees._ **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits** **401(k) Plan with Company Match:** Currently match contributions dollar-for-dollar up to 4% of eligible pay; immediate vesting. **Health & Welfare Benefits:** Employer provided medical, dental, vision, prescription drug, Employee Assistance Program and accident & illness coverage. **Life and Disability Insurance:** Employer provided basic life insurance and AD&D valued at 50K coverage amount with the option for voluntary buy-up for additional coverage. **Time Off:** Flexible non-accrual vacation; company holidays per policy. _(For California employees, this is separate from California paid sick leave, if applicable.)_ **Expenses:** Business travel and related expenses reimbursed per company policy. **Discount Program:** Company-sponsored discount program with savings on multiple lifestyle categories. **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Salary** **Hiring Min Rate** **120,000 USD** **Hiring Max Rate** **150,000 USD**

At Meta, we're building the future of human connection and the technology that enables it. This means continuously inventing and developing technologies for the next generation of experiences. To continue our efforts in the path to AGI, and as we move closer to a future with intelligent robots and advanced AI models, we're hiring talent across a broad range of disciplines from robotics hardware to system software, machine perception, and artificial intelligence. These crucial projects and initiatives taken on by this team have never been done before, so you have a rare opportunity to help us create new ways people connect around the world. The Meta Robotics Hardware team is seeking a Mechanical Design Engineer. This role is pivotal in tackling novel mechanical design problems we face including designing and developing complex robotics that balance ergonomics, performance, reliability, and usability while maintaining the highest safety and quality standards. This role will be part of a team responsible for initial concept development, analytical modeling, prototype design, construction, and testing. Candidates should be experienced working in a high ambiguity, deadline-focused environment full system requirements are seldom known. This team is dedicated to building hardware that enables learning through data collection and testing. **Required Skills:** Mechanical Design Engineer: Robotics Hardware Engineering Responsibilities: 1. Design and Development: Mechanical design and analysis problems for prototype robotics structures, mechanisms, power transmissions, and systems integration while balancing ergonomics, performance, reliability, weight, and maintainability 2. Supporting prototype fabrication and builds: Working with internal/external partners to support part fabrication and robot builds, fixtures and assembly tooling design, assembly procedures 3. Performance testing and failure analysis: Build subsystem test fixtures, design tests, create test plans, perform tests, measure and analyze data, and refine design assumptions 4. Collaboration: Work closely with a cross-functional team of engineers (EE, SW, Firmware) to deliver complete technical solutions 5. Sustaining engineering: Troubleshooting root-cause of mechanical failures, implementing improved designs, testing effectiveness of change **Minimum Qualifications:** Minimum Qualifications: 6. 5+ years experience in Mechanical Design Engineering and with experience in Machine Design 7. BS degree or equivalent experience in Mechanical Engineering or a related field 8. Experience designing complex electromechanical assemblies (e.g. robotics, automotive, aerospace, industrial automation) 9. Experience with SOLIDWORKS, Siemens NX, or similar CAD tools 10. Experience with prototyping manufacturing processes and materials 11. Experience managing time-sensitive projects through to completion while balancing evolving priorities and a broad range of stakeholders 12. Experience in tolerance analysis, geometric dimensioning and tolerancing (GD&T) 13. Experience in Finite Element Analysis (FEA) **Preferred Qualifications:** Preferred Qualifications: 14. Experience in Robotics and consumer electronic product design 15. Experience driving and leading projects from cradle to grave **Public Compensation:** $139,000/year to $200,000/year + bonus + equity + benefits **Industry:** Internet **Equal Opportunity:** Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at accommodations-ext@fb.com.

Technology Service Corporation (TSC) is seeking an Aerospace Engineer to support work at the Naval Research Laboratory. This position offers the opportunity to directly impact high-priority Navy missions. Key Responsibilities: Provide technical leadership in the design, analysis, testing, and integration of hypersonic systems, including glide vehicles, boosters, guidance/navigation, and thermal protection systems. Support systems engineering activities such as requirements definition, risk management, interface control, and verification/validation (V&V). Review and evaluate contractor technical proposals, system designs, and test plans for compliance with performance, safety, and reliability standards. Lead or support flight test planning, execution, and data analysis. Contribute to technology maturation plans, modeling and simulation activities, and digital engineering initiatives. Prepare technical reports, briefings, and documentation for senior stakeholders and decision-makers. Mentor junior engineers and provide SME input across multidisciplinary domains. Required Qualifications: U.S. Citizenship and active Secret clearance (TS/SCI preferred). Bachelor's degree in Aerospace Engineering, Mechanical Engineering, Systems Engineering, or a related technical field; Master's or Ph.D. preferred. 3+ years of relevant engineering experience, including experience in hypersonics, missile systems, or advanced weapon development preferred. Strong understanding of high-speed aerodynamics, thermal management, and materials engineering for extreme environments. Familiarity with DoD acquisition processes, test and evaluation protocols, and system development lifecycles. Excellent communication, collaboration, and problem-solving skills. Preferred Qualifications: Prior experience supporting Navy, DARPA, or OSD-led hypersonic initiatives. Experience with digital engineering tools such as Model-Based Systems Engineering (MBSE), ANSYS, MATLAB, or CFD tools. Knowledge of Navy-specific mission requirements and platforms. In compliance with applicable pay transparency laws, the expected salary range for this position is $118,000 - $210,000 per year, depending on experience and location. This role is also eligible for an annual performance bonus and may include equity or incentive compensation as part of the total rewards package TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including ESOP participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

We are a fusion power company based in Everett, WA, with the mission to build the world's first fusion power plant, enabling a future with unlimited clean electricity. Our vision is a world with clean, reliable, and affordable energy for everyone. Since Helion's founding in 2013, we have raised over $1 billion from long-time investors such as Sam Altman, Mithril, and Capricorn Investment Group as well as new investors SoftBank and Lightspeed to propel us forward. Our last prototype, Trenta, completed 10,000 high-power pulses and reached plasma temperatures of 100 million degrees Celsius (9 keV). We are now operating Polaris, our next prototype on the path to the world's first fusion power plant. This is a pivotal time to join Helion. You will tackle real-world challenges with a team that prizes urgency, rigor, ownership, and a commitment to delivering hard truths - values essential to achieving what no one has before. Together, we will change the future of energy, because the world can't wait. What You Will Be Doing: You will design, implement, and optimize the production process for in-house capacitors. This is a unique opportunity to collaborate with other teams (Supply Chain, Production, Engineering, Test Operations), directly influence the commissioning timeline for Helion's first power plant, and lay the groundwork for Helion's transition to generator mass-manufacturing. This is an onsite role that reports to the Director of Capacitor Manufacturing at our Everett, WA office. You Will: * Design and implement rate-based assembly processes with support from Production and Engineering * Manage interdisciplinary projects to increase rate and throughput of capacitor line (e.g., floor layout, tooling, build cells, large-scale equipment) * Help develop new business processes such as non-conformance management, process control, process safety, and asset maintenance to grow production line and build the foundation for high-volume production * Gather data (labor hours, cycle times, fallout) to identify production bottlenecks, and propose and deploy solutions (design changes, process changes, equipment, automation) * Identify high return-on-investment capabilities, including capital equipment and software capabilities that improve manufacturing processes, partnering with Production, Finance, Operations, and Facilities teams * Collaborate on development of future processes in parallel with supporting and enabling higher output on current production line Required Skills: * 5+ years of technical work experience that includes development and improvement of production systems * Hands-on engineering or manufacturing experience in rate-based and high-volume manufacturing * Experience communicating with and influencing partners across organizational lines * Experience in cradle-to-grave ownership of complex engineering or production scopes #LI-Onsite #LI-AM1 Total Compensation and Benefits Helion's compensation package includes a competitively benchmarked base salary, meaningful equity grants, and comprehensive benefits. Final compensation is determined through a holistic evaluation of your experience, qualifications, and our commitment to internal equity - ensuring fairness and transparency across our teams. We are committed to fostering a fair and equitable environment in every aspect of our operations, including compensation. This is an exempt salaried role. Annual Base Pay $123,000-$164,000 USD Benefits Our total compensation package includes benefits, including but not limited to: * Medical, Dental, and Vision plans for employees and their families * 31 Days of PTO (21 vacation days and 10 sick days) * 10 Paid holidays, plus company-wide winter break * Up to 5% employer 401(k) match * Short term disability, long term disability, and life insurance * Paid parental leave and support (up to 16 weeks) * Annual wellness stipend Helion is an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need assistance or an accommodation during the interview process, please let us know.

Dive in and do the best work of your career at DigitalOcean. Journey alongside a strong community of top talent who are relentless in their drive to build the simplest scalable cloud. If you have a growth mindset, naturally like to think big and bold, and are energized by the fast-paced environment of a true industry disruptor, you'll find your place here. We value winning together-while learning, having fun, and making a profound difference for the dreamers and builders in the world. We're looking for a Senior Product Security Engineer who is passionate about partnering with engineers to assess the security risk of new products and features. As a member of the Secure Design team, you will report to the Senior Manager of Product Security. Our Secure Design team enables DigitalOcean to build secure-by-design products. We leverage strong relationships with both product teams and the rest of security engineering to be successful. Our scope is primarily focused on reviewing early-stage decisions, helping develop threat models, scaling impact via automation, curating security patterns, authoring security guidance, training, and championing security initiatives. You will collaborate with other security teams and the rest of DigitalOcean to guide secure architecture design, reduce security risk in the organization, and empower engineers to make informed security decisions. Security at DO means solving incredibly complex problems at a high-scale that have real impact for our customers, our products, and the larger internet community. What you'll do: Threat model application designs and solutions and provide security risk assessments (70%) * Provide deep technical expertise in software and network architecture during holistic assessments of security layers across infrastructure, application, people, and process. * Collaborate with product managers, designers, and engineers to threat model and architect secure and resilient systems. * Identify the trade-offs of different solutions and recommend the efficient design to achieve both functional goals and security requirements. * Provide hands-on remediation guidance to development teams. Cultivate and promote a security culture (20%) * Champion an internal security culture (developer training, internal CTFs, etc.). * Mentor software engineering teams in security best practices. * Help oversee our vulnerability management program (we call it security debt). * Help DigitalOcean engineers understand how security events impact them. Do they need to worry about the next Log4j CVE? How does RetBleed impact DigitalOcean's fleet? Build security tooling and automations to help scale the Product Security team's practices (10%) * Use software architecture and coding patterns to reduce the impact of security issues. * Drive architecture, patterns, and processes across engineering that make security the easiest path. * Integrate custom security tooling into engineering workflows. What you'll add to DigitalOcean: Required qualifications: * Experience leading architectural changes or complex cross team efforts to mitigate security vulnerabilities. * Ability to clearly communicate security topics and vulnerability classes (e.g. OWASP Top Ten) and ability to provide actionable direction to product teams. * A record of partnering with internal engineering teams to tackle security problems across an entire stack with empathy and creativity. Engineering teams are our partners, not our adversaries. * Working knowledge of modern development concepts (virtualized environments, containerization, continuous integration + delivery). Preferred qualifications: * 3+ years experience guiding software teams on secure architecture design. * Experience building or reviewing threat models and ability to craft malicious user, attacker, and abuse/misuse cases. * Working knowledge of hardware and software supply chain security. * Familiarity with object oriented and functional programming concepts, particularly with languages such as Go, JavaScript, Rust, or C. Compensation Range: * $145,000 - $200,000 * This is a remote role. #LI-Remote Why You'll Like Working for DigitalOcean * We innovate with purpose. You'll be a part of a cutting-edge technology company with an upward trajectory, who are proud to simplify cloud and AI so builders can spend more time creating software that changes the world. As a member of the team, you will be a Shark who thinks big, bold, and scrappy, like an owner with a bias for action and a powerful sense of responsibility for customers, products, employees, and decisions. * We prioritize career development. At DO, you'll do the best work of your career. You will work with some of the smartest and most interesting people in the industry. We are a high-performance organization that will always challenge you to think big. Our organizational development team will provide you with resources to ensure you keep growing. We provide employees with reimbursement for relevant conferences, training, and education. All employees have access to LinkedIn Learning's 10,000+ courses to support their continued growth and development. * We care about your well-being. Regardless of your location, we will provide you with a competitive array of benefits to support you from our Employee Assistance Program to Local Employee Meetups to flexible time off policy, to name a few. While the philosophy around our benefits is the same worldwide, specific benefits may vary based on local regulations and preferences. * We reward our employees. The salary range for this position is based on market data, relevant years of experience, and skills. You may qualify for a bonus in addition to base salary; bonus amounts are determined based on company and individual performance. We also provide equity compensation to eligible employees, including equity grants upon hire and the option to participate in our Employee Stock Purchase Program. * DigitalOcean is an equal-opportunity employer. We do not discriminate on the basis of race, religion, color, ancestry, national origin, caste, sex, sexual orientation, gender, gender identity or expression, age, disability, medical condition, pregnancy, genetic makeup, marital status, or military service.

In-Service Engineering Department (Code 40): The In-Service Engineering Department plans, organizes, directs and controls NUWC Division, Keyport's efforts to ensure Fleet operational readiness through life-cycle support of combat and weapon systems. Code 40 provides In-Service Engineering Agent (ISEA) and other technical authority functions as assigned, including design, production, test, fielding, sustainment, and improvement modifications. Capabilities include systems engineering, Fleet technical support, lifecycle logistics, obsolescence management, and acquisition engineering support. Program responsibilities include submarine systems, Naval training systems, undersea warfare weapons and vehicles, and surface warfare systems. Products and services include commercial-off-the-shelf (COTS) integration and supportability, software development, technology refreshment, obsolescence management, advanced training systems, distance support, logistics support, direct waterfront support, information assurance (IA)/cyber security, and information systems. Code 40 also provides systems and project engineering leadership for assigned integrated warfare systems technical programs and project team leadership on traditional and non-traditional work assignments, including technology insertion of aircraft carrier and surface combat systems and air and surface ship acoustic sensors, standard equipment, COTS hardware and software, and supply agent projects. Requirements Bachelor of Science degree in mechanical engineering, or higher, is desired. Experience in mechanical engineering for complex systems, including design, development, integration, and test is desired. U.S. citizenship and eligibility for a security clearance required; current clearance a plus. Preferred Qualifications: Experience in mechanical engineering development standards and techniques including geometric dimensioning and tolerancing (GD&T) are desired. Experience with electro-mechanical components / systems, configuration management, and CAD systems is desired. For example, experience with Solid Edge/Solid Works, or equivalent, risk identification and mitigation, MATLAB, LabVIEW, T&E analysis, electronics packaging design, and tooling and fixturing design. U.S. Navy submarine/underwater warfare system experience a plus. Equal Employment Opportunity Statement: McLaughlin Research Corporation is an Equal Opportunity and Affirmative Action Employer. It is our policy to recruit, hire, promote, and train for all positions without regard to age, race, creed, religion, national origin, gender identity, marital status, sexual orientation, family responsibilities, pregnancy, minorities, genetic information, status as a person with a disability, amnesty or status as a protected veteran, and to base all such decisions upon the individual's qualifications and ability to perform the work assigned, consistent with contractual requirements and all federal, state and, local laws. EEO is the Law: Applicants and employees are protected under Federal law from discrimination. MRC offers a competitive benefit plan to employees and their eligible family members that includes health, dental, vision, life, and disability plans, paid holidays, accrued leave, accrued vacation, 401K, profit sharing, as well as, any other state or federally required benefits. The hiring wage range is $ 25.00 to $32.00 per hour.

Dorkin Inc. Our employees are a reflection of our company and our goal is to make this your “end all be all” through restoring job security and longevity in the American workplace. Our corp-culture is very friendly, upbeat, and fast-paced. We encourage feedback from our staff and welcome the opportunity to hire energetic polished individuals with a mind frame of growth and customer service excellence. Join a leading edge company with whom you can be proud to represent and bring some stability back into your work-life balance. Every team member has a strong “drink the kool-aid” attitude towards being a successful employee of DORKIN inc. Job Description Perform engineering duties in designing, constructing, and testing aircraft, missiles, and spacecraft. May conduct basic and applied research to evaluate adaptability of materials and equipment to aircraft design and manufacture. May recommend improvements in testing equipment and techniques. Engineering and Technology Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services. Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models. Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub- atomic structures and processes. Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming. Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Qualifications Bachelor's degree 10+ years experience with no degree Additional Information Formulate mathematical models or other methods of computer analysis to develop, evaluate, or modify design, according to customer engineering requirements. Plan or conduct experimental, environmental, operational, or stress tests on models or prototypes of aircraft or aerospace systems or equipment. Formulate conceptual design of aeronautical or aerospace products or systems to meet customer requirements or conform to environmental regulations. Plan or coordinate activities concerned with investigating and resolving customers' reports of technical problems with aircraft or aerospace vehicles. Write technical reports or other documentation, such as handbooks or bulletins, for use by engineering staff, management, or customers. Direct or coordinate activities of engineering or technical personnel involved in designing, fabricating, modifying, or testing of aircraft or aerospace products. Evaluate product data or design from inspections or reports for conformance to engineering principles, customer requirements, environmental regulations, or quality standards. Develop design criteria for aeronautical or aerospace products or systems, including testing methods, production costs, quality standards, environmental standards, or completion dates. Analyze project requests, proposals, or engineering data to determine feasibility, predictability, cost, or production time of aerospace or aeronautical products. Maintain records of performance reports for future reference. Analyze design or requirements information for mechanical equipment or systems. Evaluate designs or specifications to ensure quality. Inspect equipment or systems. Test performance of electrical, electronic, mechanical, or integrated systems or equipment.

Type of Requisition: Regular Clearance Level Must Currently Possess: Top Secret/SCI Clearance Level Must Be Able to Obtain: Top Secret SCI + Polygraph Public Trust/Other Required: None Job Family: Technical Support Services Job Qualifications: Skills: Computer Systems, Technical Knowledge, Technical Support, Troubleshooting Certifications: Security+, CE - CompTIA - Security+ CE - CompTIA - CompTIA - Security+ CE - CompTIA Experience: 3 + years of related experience US Citizenship Required: Yes : Systems Specialist Senior Transform technology into opportunity as a Systems Specialist Senior with GDIT. A career in enterprise IT means connecting and enhancing the systems that matter most. At GDIT you'll be at the forefront of innovation and play a meaningful part in improving how agencies operate. At GDIT, people are our differentiator. As a Systems Specialist Senior you will help ensure today is safe and tomorrow is smarter. HOW A SYSTEMS SPECIALIST SENIOR WILL MAKE AN IMPACT ● Supports the functionality and efficiency of a group of computers running on one or more operating systems WHAT YOU'LL NEED TO SUCCEED: ● Education: Technical Training, Certification(s) or Degree ● Required Experience: 3+ years of related experience Job Description: Re-enabling ports and the changing of VLANs on the Access Switches. Assisting government counterparts with on-site and off-site solutions. Execute the installation, configuration, and upgrade of software and hardware across multiple security classifications. Execute first class customer service by demonstrating equal and fair treatment of personnel. Create documentation of knowledge base services and solutions. Execute effective verbal communication to technical and non-technical personnel using multiple channels (In person, email, phone, and VTC). Engage and support organizations with technical and digital solutions (Including VIP coverage for GG-15, SES, and General Officer personnel). Serve as a consultant by engaging new and existing customers in developing technical and digital solutions by coordinating with CIO Senior Representatives (CSRs), supplying technical expertise, and providing guidance with the supply chain risk management process. Collaborate with 30+ outside technical agencies and organizations as a DIA/GDIT representative - Responsible with working closely with partner organizations on technical projects and tasks. (i.e. DISA, U.S Army, Air Force, National Guard Bureau. and CESO). Execute logistical duties such as: Schedule the delivery and collection of equipment and unloading and staging of new equipment. Assist and execute the installation, upgrade, and troubleshooting of Studio and Desktop Video Teleconferencing systems. Execute the imaging and configuration of mobile systems such as laptops and tablets. Execute cable installation and management for new and existing office spaces. Collaborate with non-DIA agencies for networking requirements. Engage and execute multiple small-medium projects by participating in the planning, requirement gathering, multi-organizational collaboration, resource management, installation, risk management, quality assurance, and technical support. Provide incident response to small-large-scale issues by providing technical support, multi-organizational collaboration, system restoration, eradication, recovery verification, and preventive measures. Required Certs: 1. Security+CE 2. PWS 9.1 GDIT IS YOUR PLACE: ● 401K with company match ● Comprehensive health and wellness packages ● Internal mobility team dedicated to helping you own your career ● Professional growth opportunities including paid education and certifications ● Cutting-edge technology you can learn from The likely hourly rate for this position is between $45.52 - $61.58. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: None Telecommuting Options: Onsite Work Location: USA DC Washington Additional Work Locations: Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc. Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Quanex is looking for a Manufacturing Engineer to join our team in Chehalis, WA. Do you have experience designing equipment and executing capital projects for automation to help reduce costs, improve profitability, and support customer growth? Are you someone who believes in leading change and want to be part of a winning team? At Quanex we have the tools to help you achieve your goals! The Manufacturing Engineer will be working under limited to general supervision and will be responsible for controlling multiple project activities in the areas of product/process design, product/process modifications, manufacturability studies, plant usage, plant layouts, capital investments and engineering documentation. We Offer You! * Competitive Salary * Bonus Potential * 401K with 5% company match, yours to keep after 2 years * 15% immediate return if you participate in the company's ESPP * Medical, Dental & Vision Plans * Employer paid disability plans and life insurance * Paid Time Off & Holidays (2 weeks) and Paid Holidays (up to 9 days annually) * Standard Work Schedule * Tuition support for degree and continuous education * Employee Resource Groups focused on employee empowerment What's attractive about the Manufacturing Engineer position? * Supportive and collaborative culture * Ongoing interaction with multiple levels of the organization * Tenured team of leaders and peers to provide support and training * Knowledgeable and motivated team members What Success Looks Like: * Prepares funding requests for projects to implement new tools and equipment. The expectation for these projects can be large in nature and may be complex; they will have long term impacts to the operation of our business and provide gains in profitability. * Leads design estimation process, which includes determining the feasibility of design, estimates design times requirements, assembly, testing and project costs. * Determines and calculates financial justification for projects through labor savings, efficiency gains, scrap reduction, safety hazard elimination, etc. Financial analysis to include IRR and payback period. * Responsible for development of documentation necessary for manufacturability. This includes but is not limited to Bills of materials, Product Flow Charts, Part Drawings, Assembly Drawings, Schematic (Air, Lube, and Hydraulics) Piping Drawings and Orientation Drawings. * Communicates design intent to electrical engineering, ensuring electrical requirements are included in the design, and the product operates in the most efficient manner, without unnecessary complexity. * Manage total project activities with a plan for timely completion. The individual will be heavily involved in implementation teams and projects that have impact to the overall success of the organization. * Provide technical assistance to all company departments, as well as other divisions and customer(s). What You Bring: * Bachelor of Science Degree in Engineering discipline or equivalent experience to prove capabilities. * Minimum of two years' experience as a product/design/mechanical/manufacturing engineer or related engineering field. * Proficient in project management and communication skills. * Excellent time management skills with a proven ability to meet deadlines. * Strong analytical and problem-solving skills with the ability to assess problems or issues with manufacturing equipment. * Fluent in SolidWorks and other applicable engineering programs. * Proficient with Microsoft Office Suite or related software. The salary range for this position is $85,975 to $128,962 with bonus potential. About Quanex, A Part of Something Bigger Quanex (NYSE: NX) is a global, publicly traded manufacturing company primarily serving OEMs in the fenestration, cabinetry, solar, refrigeration and outdoor products markets. We are A Part of Something Bigger by improving the performance and aesthetics of end products through continuous innovation, helping customers achieve greater production efficiencies, dedication to giving back to communities where we operate, producing shareholder value and helping our employees learn, grow, and thrive. Learn more at Quanex.com. #QHP1 #LI-LG1

We are seeking an experienced Development Engineer to work on our R&D Team in our manufacturing facility in Tacoma, WA. Who We are: General Plastics Manufacturing Company specializes in the formulation of polyurethane foams and the production of build-to-print composite parts, offering custom solutions for industries such as aerospace, defense, and nuclear packaging. With over 80 years of expertise, GP delivers high-performance, precision-engineered composite components using advanced materials and manufacturing techniques. GPs focus with the LAST-A-FOAM line of products is meeting the exacting specifications of demanding markets by ensuring consistency, longevity, and durability. General Plastics is committed to quality, innovation, and timely delivery, making us a trusted partner for complex, mission-critical composite part needs. Position Summary: The Development Engineer will be responsible for the implementation and support of new and existing materials for GP. The ideal candidate will have hands-on experience with various materials processes and equipment and will have strong troubleshooting skills and mechanical aptitude. **This is not a software engineering position.** Responsibilities: Process Optimization / Production Support · Determine optimal process windows and define work instructions · Troubleshoot and resolve material and process issues encountered during manufacturing. · Identify and implement improvements to existing production processes to enhance efficiency, reduce costs, and improve product quality. New Product Development · Work with production teams to scale up new formulations from the lab to full-scale manufacturing; overseeing the creation of TDSs, work instructions, and related documents. · Fabricate or facilitate the creation of new equipment necessary to realize new material innovations. Collaboration · Collaborate with cross-functional teams, including production, sales, and quality assurance, to define product requirements and ensure manufacturability. · 3+ years of hands-on experience in a manufacturing or R&D setting, preferably with polymeric or composite materials. · In-depth knowledge of polymer or polyurethane chemistry and processing methods (e.g., molding, casting, injection). · Experience in process or equipment design and development. · Strong analytical and problem-solving skills, with a detail-oriented mindset. · Ability to work both independently and collaboratively within a team environment. · Excellent written and verbal communication skills. · Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Chemical Engineering, Materials Science, or a related field is a plus What We Have to Offer You: Your innovation and hard work can help create some of the most unique high performance plastic products for emerging markets, and long-term customers in the country. As a result, youll find one of the best compensation, benefits and advancement programs in the industry. Were looking for energetic, motivated people with a can-do attitude and a desire to work smart. If you are a person with a strong work ethic who enjoys the chance to excel in a positive, team-oriented setting, youll find General Plastics to be a rewarding environment. Plus, our Total Compensation Package is Beyond the Industry Average and includes the following: · Base compensation range is $80-$110k annually, depending on experience · Profit-Sharing Bonus Program paid 3 times per year · Outstanding Health Care Benefits including no premiums for medical and vision for entire family & no premiums for dental for employee · Company Matched 401K up to 8% · Employee Assistance Plan · We encourage healthy eating and subsidize lunchroom food/beverage costs · Disability & Life Insurance Package · Generous Earned Time Off Plan starts at 20 days of leave per year, plus 9 Paid Holidays ITAR - US Persons Status: Due to General Plastics' participation in the defense industry, International Traffic in Arms (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed, or shared by US Persons as defined by law. A "US Person" can be a US citizen, a lawful permanent legal resident, or an individual who has been admitted as a refugee or asylee. General Plastics Manufacturing Company EEO Statement: General Plastics is committed to a diverse and inclusive workplace. We are an equal opportunity employer and do not discriminate on the basis of race, national origin, age, religion, gender, sexual orientation, gender identity, disability, veteran status, or any other legally protected status. Should you have a disability that requires assistance and/or reasonable accommodation with the job application process, please contact the Human Resources department at **************. Drug and Alcohol-Free Workplace: General Plastics is a Drug and Alcohol-Free Workplace and both post offer applicants and employees are subject to testing for marijuana, cocaine, PCP, opioids, amphetamines, and alcohol when criteria are met as outlined in our company policies. ** We are a federal subcontractor, and we test for marijuana.** Compensation details: 80000-11000 Yearly Salary PI4ef9583bf1cb-31181-38655664

Job Details Seattle Engineering Center - SEC - Seattle, WA Fully RemoteDescription About the Team AeroTECs Engineering Services Department supports and provides comprehensive, full-service aerospace engineering services to customers in aircraft design and certification. The Engineering Services Department is responsible for providing engineering consulting services related to aircraft performance, similarity analysis, reviewing and supporting certification activities, determining test requirements, and planning and documenting testing to meet customer needs. The Engineering Services Department provides several areas of expertise in Flight Sciences, Electrical Systems, Mechanical Systems, Powerplant & FIFA, Air Systems, Cabin Safety, Structures and Liaison Engineering. About the Role The Aerospace Engineer, EWIS (Electrical Wiring Interconnect System) position is responsible for designing, analyzing, and maintaining the electrical configuration of aircraft systems. These EWIS aspects are for various systems and components on an airplane and rotorcraft. This role requires the significant exercise of independent discretion and judgment in matters of significance. In This Role You Will: Review and understand customer specifications, technical documentation, and electrical configurations. Analyze design requirements and perform trade-off studies. Produce and validate electrical documentation, such as wiring diagrams and harness data reports. Create and maintain tracking tools for quality and productivity. Review and analyze the electrical configuration of aircraft systems, read and understand the technical documentation such as schematics. Produce and validate electrical documentation such as wiring diagrams (WD) and harness data report (HDR). Create and maintain quality and productivity tracking tools Work in close cooperation with other engineering disciplines such as Systems, Electrical, Avionics, EMC, Safety, etc. Work in close cooperation with other non-engineering disciplines such as Quality, Logistics, Methods, Customer support, etc. Keep an open and innovative mindset to implement improvements. Qualifications The Skills You Will Bring (Minimum): Education: Four (4) year degree in Engineering (Aerospace or Electrical) or equivalent experience. Experience: Five (5) years aerospace experience in EWIS, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane. Knowledge of aircraft systems (EWIS, Electrical, Avionics, Safety, etc.) is preferred. Strong understanding of electrical harness assemblies, components, and routing. Strong knowledge of aircraft wiring (EWIS) & electrical systems is required. Experience with AutoCAD, CATIA, NX, Capital or any relevant electrical software. Experience working with electrical schematics and test environments. Familiarity with FAR Part 25 subpart H and certification rules addressing EWIS. You are familiar with SAE-AS50881 covering all aspects of EWIS. You are familiar with RTCA/DO-160 environmental conditions & test procedures. Required: Capital Harness (min. 5 years of experience) Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: While performing the duties of this job, the employee is regularly required to talk and/or hear. The employee is frequently required to sit, stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Must have the ability to sit for long periods of time. The employee is occasionally required to climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Occasional travel (flying and driving) to various domestic and international worksites and client offices may be required. Occasional travel to the Moses Lake Facility for extended periods of time during scheduled flight test operations may be required. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, Lawful Permanent Resident, Refugee, or Asylee. AeroTEC is an equal opportunity employer.