Design manufacturing engineer jobs near me

Who is IC? Independence Construction is one of the largest CM businesses headquartered in Northeast Ohio. As part of the DiGeronimo Companies, we offer our clients self-perform services through our affiliated companies, as well as bring an owner's approach to projects through the company's work as a developer. We bring our experience and reputation for honesty, integrity, and outstanding performance to the world of design and management in order to ensure the best results for our partners, subcontractors, and community. What do we believe in? PEOPLE: Provide a safe, family-oriented environment. Commitment to integrity. Protect our most valuable assets. PERFORMANCE: Always deliver the highest quality. Find solutions. Provide value to our partners. COMMUNITY: Positively impact the communities we serve. Give back. Leave the world a better place than we found it. As a Project Engineer, your key responsibilities are to assist the project manager and/or superintendent in one or more aspects of a construction project. Coordination with Subs, vendors, suppliers, and Independence Construction project team. Administer and monitor compliance with construction contracts with Owners, subcontractors and vendors. Coordinate and expedite materials and services for the job site, in conjunction with superintendent. Schedule and manage meetings throughout each phase of construction and preconstruction. Assist the PM with the management of Project Budget, Budget Revisions, Cost Projections, and Cash Flow Projections. Assist with the generation of reports. Review and coordinate structural, architectural and MEP drawings throughout the project. Assist PM in the oversight and management of change management processes. Collect and analyze the trade contractor proposal for scope changes. Review and negotiate the cost for the change in scope to ensure the pricing is accurate and fair for the change in work. Log the change management to the correct cost codes. Issue the subcontract change order upon approval of the change by Owner and PM. Responsible for the entire RFI process (initiate, review the response, maintain a log and distribute to team as appropriate. Responsible for the entire submittal process (initiate, review the submittal, maintain a log and distribute to team as appropriate upon approvals. Responsible to keep accurate and current at all times the drawing log, submittal log, and RFI log. Coordinate all project meetings with PM and Superintendent prior to the start of project. Attend Owner / Architect / CM (Contractor) meetings. Collect, review and process subcontractor payment applications as assigned by the PM. Assist in compiling owner payment applications. Assist the Superintendent and PM as requested in creating and updating the Master Schedule. Quality Control and Quality Assurance - Work with the team (PM, PX, Supt.) for the development of the project QA/QC program. Assist PM and Superintendent with Close-out process. Assist with the preliminary punch list process. Coordinate owner-requested warranty requirements during the warranty period. Do you have what it takes? Bachelor's degree in construction management or engineering or equivalent combination of education and experience. 2-5 years of previous related experience is required Strong written and oral communication skills. Knowledge of budgeting and expense control. Able to write reports, and business correspondence. Able to organize work, engage in a variety of tasks simultaneously and consistently meet deadlines. Able to perform duties independently. Computer skills: Microsoft Office applications. Strong attention to detail.

We are seeking a motivated and detail-oriented Project Engineer to join our dynamic team. The ideal candidate will play a pivotal role in overseeing various construction projects from inception to completion, ensuring that all aspects are executed efficiently and effectively. This position requires strong project management skills, proficiency in construction management software, and a solid understanding of engineering principles. Your responsibilities in this role: Maintain contract documents, posting and distribution of addenda, field orders, RFI's and Requests for Proposal Control shop drawings and submittals to review for contract compliance and establish a routing process to ensure that all involved in the work are kept informed Lead the project QC including all deviation reports, pre-pour inspections, completion lists, testing reports, etc. and actively update the Project Manager and Superintendent Coordinate Requests for Information to and from architectural engineer, owner and other contractors and subcontractors Assist in assembling proposals and prepare owner change order requests Maintain “As-Built” drawings; prepare final close out sets Secure operations manuals guarantee and warranties; assist in project close-out What you need to qualify: 1-3 years of relative job experience in commercial construction highly preferred BS degree in Construction Management or Engineering Thorough understanding of industry practices and standards Strong foundation in database management (ex. Excel) and related industry software (ex. Bluebeam) Highly collaborative work style with excellent communication skills Join us as we build innovative solutions in the construction industry! LRT is proud to be an Equal Opportunity Employer and member of the Drug Free Safety Program.

Who You Are: You're a dynamic problem-solver with a passion for construction. Detail-oriented and driven, you thrive in collaborative environments and excel at managing multiple responsibilities. You're ready to take on challenges head-on and contribute to meaningful projects that make a difference. The Opportunity: You'll play a vital role in managing construction processes and driving project success. This role offers dynamic work, opportunities for growth, and a chance to make a significant impact in the Water, Wastewater, Industrial, and Energy sectors. Who We Are: Our people are our strength. As an employee-owned national construction company, we prioritize collaboration, innovation, and continuous improvement. We're committed to fostering a culture of growth and empowerment, where every team member is valued and supported. What You'll Do: As a Project Engineer, you'll work closely with the Project Manager and Superintendent to manage all construction processes effectively. From scheduling to safety, your responsibilities will include: Implementing Bowen's SQP process Supporting Field Engineer duties to ensure project success Facilitating communication with stakeholders Streamlining purchasing processes and coordinating submittals Identifying and addressing potential issues proactively Participating in project status meetings and reporting on progress Contributing to site safety audits and upholding safety standards Assisting in project close-out activities and estimating project divisions Why You'll Love Working At Bowen: The Right Size: Large enough for great resources, small enough that you'll personally know our leadership and they'll know you. Hands-On Experience: Work directly with Craft, PMs, Superintendents, and Engineering Partners, seeing the work unfold daily. We self-perform, fostering teamwork rather than just managing subcontractors. Growth Opportunities: The sky's the limit if you're willing to work hard, be patient, and take initiative. We're committed to developing future leaders and invest in your growth. Safety First: "Zero Injury and Genuine Concern for Others." We don't do shortcuts. We've built a culture where teams are empowered to speak up and continuously improve safety. Build Unique Projects: Our strength lies in deep, heavy, complex work. The variety will challenge you and keep things exciting. Strong Support System: We provide the training and team you need. Besides on-the-job training, we offer annual and bi-annual sessions at corporate, ensuring you're surrounded by a strong support system. Hard Work, Big Rewards: The work is tough but incredibly rewarding. We believe in Celebrating Success and encourage you to use your PTO. Our company trips and close-knit teams foster lasting friendships. While construction means some travel, we do our best to keep you close to home and always have your back. Must-haves in a Candidate: Bachelor's degree in construction/engineering or equivalent technical training 2+ years of construction experience Strong communication and interpersonal skills Proficiency in computer applications Sound understanding of cost analysis principles Nice to Haves in a Candidate: Experience working with self-perform construction operations Experience with advanced scheduling techniques Knowledge of value engineering principles Familiarity with construction safety standards and procedures Additional Details: This position will support our Columbus, OH operation. Must be comfortable with potential travel throughout the week. Benefits: Competitive Base Salary Medical, Dental and Vision Insurance PTO from Day 1 7 Paid Holidays (plus 6 additional half-days), 1 Community Day, 1 Floating Holiday Paid Parental Leave Annual Discretionary Bonuses Car Allowance Employer-paid Life Insurance with supplemental options 401k with Company Match HSA and FSA options Employee Referral Program Wellness Program Employee Assistance Program (EAP) Short and Long-Term Disability Family Planning and Adoption Assistance Education Reimbursement

Insight Global is seeking a Project Engineer supporting a client in Columbus, OH. This will be a direct hire, full time salary opportunity. This Project Engineer will be responsible for creating innovative solutions and detailed designs for new products and systems. They will collaborate closely with cross-functional teams to ensure projects meet performance, quality, and safety standards. Potential candidates must be comfortable working in an office setting and being on site at the project when needed. Desired Skillset: Completed STEM bachelor's degree Professional design experience in AutoCAD, SolidWorks or Revit Industrial, electrical or mechanical industry experience Compensation: $100,000-130,000

A nationally recognized architectural and engineering consultancy is looking to add a technically sharp and forward-thinking Project Design Engineer - Structural to their team. With offices in key markets and a reputation for innovation and quality, this firm is known for tackling projects that span commercial, civic, and institutional sectors. You're being invited to join a dynamic team where your skills in structural design will be valued, and you'll have plenty of chances to learn and grow alongside talented colleagues in a supportive atmosphere. What You'll Do: Contribute to the design and documentation of building structures using steel, concrete, timber, and hybrid systems. You'll play a key role in ensuring structural elements meet regulatory standards and are thoroughly analyzed for both new construction and renovation initiatives. Work closely with project managers on design intent, deliverables, and timelines. Collaborate with architects, MEP engineers, and other stakeholders to align structural solutions with project goals. Participate in quality checks, internal reviews, and technical coordination across project milestones. Help assess design challenges and offer technical input to guide project direction efficiently. Qualifications: A background in civil or structural engineering with a bachelor's degree is required, and having a postgraduate degree would be a significant advantage. A strong background in structural engineering and building design is expected, with familiarity with a variety of materials and systems. EIT with active progress toward PE/SE licensure, or currently licensed as a PE/SE. Familiarity with relevant building codes and experience using structural modeling tools. Team-first mindset with a track record of positive collaboration and quality execution. Why Join This Firm? Work on impactful projects that are shaping skylines and communities nationwide. Mentorship from experienced professionals and a budgeted path for continuing education. Strong internal culture that promotes autonomy, creativity, and career progression. Benefits include: Comprehensive health, dental, and vision plans 401(k) with match Paid time off and company holidays Annual bonus potential Student loan repayment options Certification/licensure reimbursement Flexible schedules and work/life balance support If you're ready to grow your technical capabilities while making a lasting impact through structural design, this role offers a compelling path forward. About Blue Signal: Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at bit.ly/46Gs4yS

Electrical Engineer / Designer An established Ohio-based mechanical and electrical consulting engineering firm, with offices in North Royalton and Columbus and a history dating back to 1993, is seeking a talented and experienced full-time Electrical Engineer or Electrical Designer. This position is key to supporting our continued growth and expansion. The role will initially be titled "Electrical Engineer/Designer" with strong potential for career progression into a "Project Manager" or "Project Engineer" over time. Key Responsibilities As an integral part of our team, you will be responsible for: Executing electrical design for a diverse range of project types, including commercial, office, retail, healthcare, and others. Applying design expertise in areas like power distribution, grounding, lighting, control systems, and equipment selection and specification. Preparing schematics for various electrical systems. Collaborating with all disciplines (mechanical, structural, civil, etc.) to ensure a completed, fully coordinated design and reviewing the work of other team members. Conducting on-site investigations to accurately confirm existing conditions. Developing and maintaining familiarity with current electrical codes and standards. Building professional relationships with same-level personnel from other disciplines and manufacturing sales representatives. Preparing and becoming familiar with both general and electrical specifications. Desired Skills & Abilities We are looking for a candidate with at least 3 years of relevant experience who possesses the following: Strong interpersonal skills to effectively collaborate in a team environment. Familiarity with system-specific materials, components, and electrical systems. Basic understanding of high-level mathematics as it applies to electrical design work. Excellent oral and written communication skills. Analytical ability to effectively solve complex problems. Working proficiency/knowledge of AutoCAD. Working proficiency/knowledge of REVIT is desired, but not required. Our Collaborative Environment and Benefits We operate an open and collaborative space that fosters an environment where ideas are freely exchanged, innovative solutions are created, and proposals become reality. While the pace is often fast, we are committed to maintaining a respectful, cooperative spirit that honors schedules, work habits, personal priorities, and individual “space.” Our staff has contributed to award-winning projects around the country, working with some of the most dynamic architectural and design firms. We encourage a relaxed atmosphere while prioritizing hard work, continuous learning, and advancement in the industry. We offer many opportunities for personal and career advancement, including support for continuing education. Additional Benefits Include: 401(k) with a Safe Harbor contribution of 3% of salary. Full Health Insurance Coverage in the Medical Mutual SuperMed PPO Network. Paid Time Off including vacations and holidays.

Battelle delivers when others can't. We conduct research and development, manage national laboratories, design and manufacture products and deliver critical services for our clients-whether they are a multi-national corporation, a small start-up or a government agency. We recognize and appreciate the value and contributions of individuals from a wide range of backgrounds and experiences and welcome all qualified individuals to apply. Job Summary You will lead the development of advanced subsystems for applications critical to our nation's defense. You'll drive projects from concept through integration, collaborating with multidisciplinary teams-including electrical, software, systems, and materials engineers. You'll work closely with program managers, serving as both an individual contributor and technical lead, guiding and mentoring other engineers. We are seeking experienced maritime design engineers who have successfully taken parts or subsystems from requirements definition through integration in marine environments. Responsibilities Design innovative mechanical solutions with focus on marine components and systems. Shape system architecture through concept generation, requirements definition, and test planning. Collaborate hands-on with technicians in lab assembly and testing to validate and refine designs. Accountably lead and manage tasks within budget and schedule, partnering with program managers. Support proposal development and capture management for government contracts. Communicate technical results and project progress to leadership and customers, both verbally and in writing. Desire to continually learn and grow both in technical competency and project responsibilities. Key Qualifications Proven experience designing components and subsystems for maritime environments. Strong proficiency in SolidWorks and/or Creo. Solid understanding of ASME Y14.5 and GD&T. Experience leading technical teams. B.S. in Mechanical Engineering, Naval Architecture, Ocean Engineering, or related fields from an accredited university, with 7+ years of relevant industry experience. U.S. citizenship and ability to obtain/maintain a Top Secret/SCI clearance. Physically able to work in laboratory and field environments. Excellent organizational, time management, and interpersonal communication skills. Self-starter with the ability to work independently and mentor junior staff. Preferred Qualifications Experience with maritime-specific analyses (naval architecture, buoyancy, wave propagation). FEA experience (mechanical, thermal, dynamic; ANSYS preferred). Hydraulic and/or high-pressure pneumatic system design. Familiarity with pressure vessel standards (ABS, ASME BPVC, DNV). Hands-on skills in prototype building and testing. Experience authoring proposals for U.S. Government contracts. Travel: Up to 10% (project dependent) Work Environment: Flexible hybrid model; majority in-office in Columbus, OH. Benefits: Live an Extraordinary Life We care about your well-being, not just on the job. Battelle offers comprehensive and competitive benefits to help you live your best life. Balance life through a compressed work schedule: Most of our team follows a flexible, compressed work schedule that allows for every other Friday off-giving you a dedicated day to accomplish things in your personal life without using vacation time. Enjoy enhanced work flexibility, including a hybrid arrangement: You have options for where and when you work. Our Together with Flexibility model allows you to work 60% in-office and 40% remote, with Monday and Tuesday as common in-office days, dependent on team and position needs . Take time to recharge: You get paid time off to support work-life balance and keep motivated. Prioritize wellness: Stay healthy with medical, dental, and vision coverage with wellness incentives and benefits plus a variety of optional supplemental benefits. Better together: Coverage for partners, gender-affirming care and health support, and family formation support. Build your financial future: Build financial stability with an industry-leading 401(k) retirement savings plan. For most employees, we put in 5 percent whether you contribute or not, and match your contributions on top of that. Advance your education: Tuition assistance is available to pursue higher education. A Work Environment Where You Succeed For brilliant minds in science, technology, engineering and business operations, Battelle is the place to do the greatest good by solving humanity's most pressing challenges and creating a safer, healthier and more secure world. You will have the opportunity to thrive in a culture that inspires you to: Apply your talent to challenging and meaningful projects Receive select funding to pursue ideas in scientific and technological discovery Partner with world-class experts in a collaborative environment Nurture and develop the next generation of scientific leaders Give back to and improve our communities Vaccinations & Safety Protocols Battelle may require employees, based on job duties, work location, and/or its clients' requirements to follow certain safety protocols and to be vaccinated against a variety of viruses, bacteria, and diseases as a condition of employment and continued employment and to provide documentation that they are fully vaccinated. If applicable, Battelle will provide reasonable accommodations based on a qualified disability or medical condition through the Americans with Disabilities Act or the Rehabilitation Act or for a sincerely held religious belief under Title VII of the Civil Rights Act of 1964 (and related state laws). Battelle is an equal opportunity employer. We provide employment and opportunities for advancement, compensation, training, and growth according to individual merit, without regard to race, color, religion, sex (including pregnancy), national origin, sexual orientation, gender identity or expression, marital status, age, genetic information, disability, veteran-status veteran or military status, or any other characteristic protected under applicable Federal, state, or local law. Our goal is for each staff member to have the opportunity to grow to the limits of their abilities and to achieve personal and organizational objectives. We will support positive programs for equal treatment of all staff and full utilization of all qualified employees at all levels within Battelle. The above statements are intended to describe the nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, activities and skills required of staff members. No statement herein is intended to imply any authorities to commit Battelle unless special written permission is granted by Battelle's Legal Department. For more information about our other openings, please visit ************************

Feasibility study of design concepts and product manufacturability. Identify and implement best practices from past models. Develop and establish efficient manufacturing processes Develop manufacturable and scalable design solutions by aligning engineering specifications with factory capabilities and project goals. Support physical verification of the vehicle during initial production at the factory. Ability to work with a team to identify and resolve design/manufacturing issues. Experienced in working on CATIA V6, 3DExperience and Delmia

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose As an Engineer within Seat and Package Development Department you are expected to provide logical designs as part of a project team supporting model developments. Working with project team members and cross-functionally, you are expected to learn, grow, and develop your know-how and engineering skills. Key Accountabilities Engineering Solution Design - Draft engineering solutions for an assigned component / part (or more complex parts with supervision) and the associated drawings and validation processes, to gather data and provide feedback on their feasibility, costs, quality, and performance Engineering Specifications - Carry out a range of activities under the direct guidance and supervision of more senior engineers to draft engineering specifications for an assigned component / part and the evaluation of their effectiveness, to inform manufacturing work in the organization and / or of its suppliers. Ensure functional safety standards are met. Data Collection and Analysis - Collate and analyze data using pre-set tools, methods, and formats. Involves working independently. Integration & Correlation - Work to collaborate and integrate your design into the vehicle with other groups under the direct supervision of more senior engineers. Learn from interactions with other groups (i.e. design, testing, manufacturing, styling, service) for the assignment at hand. Supplier Management - Work with existing suppliers to mature designs and address issues in a timely manner to achieve project requirements. Documentation - Prepare logical and conclusive documentation for review by more senior engineers to record and submit all necessary development / testing / research information as the respective activities mature. Project Management - Work within an established project management plan to achieve specific goals such as schedule, cost, investment, or weight. Provide regular updates and contribute in project team meetings. Personal Development - Develop own expertise and capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching. Gain or maintain external professional accreditations where relevant to improve performance and fulfil personal potential. Build proficiency in relevant technology and increase knowledge of external regulations and industry best practices through ongoing education, conferences, and specialist publications. Qualifications, Experience, and Skills Minimum Educational Qualifications BS Mechanical, Aero, Automotive or equivalent Engineering experience. BS Bio-Mechanical, Bio-Medical, or equivalent Engineering experience. BS Industrial Design or equivalent industry experience. Minimum Experience 3+ months engineering experience including co-op, internship, senior project, or equivalent. Other Job-Specific SkillsPast experience with CAD software (CATIA V5 or V6 preferred) Proficient in Microsoft Office programs Ability to travel and work overtime as required. Job DimensionsDecisions ExpectedWorking Conditions Primary working location is seated at a desk Limited lifting of parts and part dunnage maybe required on occasion OT required as necessary to achiever program deliverables. What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development programs Additional Offerings: Tuition Assistance & Student Loan Repayment Lifestyle Account Childcare Reimbursement Account Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Descripción Puesto en Samtec, Inc Founded in 1976, Samtec is a privately held, $950 million global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec's global presence enables its unmatched customer service. THIS POSITION WILL BE LOCATED ONSITE AT SAMTEC - NEW ALBANY, IN Summary/Objective: The Product Engineer designs and develops within New Product or Sustaining Product Engineering. Essential Functions/ Responsibilities: Developing & writing the Engineering inputs for technical documentation; and adhere to all corporate engineering standards including but not limited to documentation, file management, part modeling, and part simulation. Works directly with Marketing and Sales to review opportunities and develop engineering cost analyses based on Product Scopes, work directly with purchasing, quality, manufacturing engineering, test engineering, process engineering, electroplating, suppliers, and other necessary groups as a cross-functional team to develop products and solutions. Make significant contributions to design, development, and validation of connector solutions (including but not limited to board, cable, power, high speed, and panel mount products). Works hands on to identify problems during new product development and/or when quality concerns arise. Effective use of Office365 including Outlook, Excel, PPT, SharePoint, etc. Work effectively with different levels and individuals inside and outside of the organization. “The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities” Required Experience 3 - 5 Year's experience in connector design/manufacturing required. Component, assembly design, and manufacturing experience may be consider in lieu of this. Engineering Design Software: SolidWorks, AutoCAD, etc. Simulation Software: FEA, CFD/Thermal Modeling, etc. is preferred, but not required. Must be able to handle multiple projects simultaneously as priorities can change quickly. Must have excellent communication, collaboration, and organizational skills. Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs. Preferred Education: Bachelor's Degree in Mechanical Engineering, Electrical Engineering, or equivalent is required

at Samtec, Inc Founded in 1976, Samtec is a privately held, $950 million global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec's global presence enables its unmatched customer service. ** THIS POSITION WILL BE LOCATED ONSITE AT SAMTEC - COLUMBIA, SC ** Summary/Objective: The Product Engineer designs and develops within New Product or Sustaining Product Engineering. Essential Functions/ Responsibilities: Developing & writing the Engineering inputs for technical documentation; and adhere to all corporate engineering standards including but not limited to documentation, file management, part modeling, and part simulation. Works directly with Marketing and Sales to review opportunities and develop engineering cost analyses based on Product Scopes, work directly with purchasing, quality, manufacturing engineering, test engineering, process engineering, electroplating, suppliers, and other necessary groups as a cross-functional team to develop products and solutions. Make significant contributions to design, development, and validation of connector solutions (including but not limited to board, cable, power, high speed, and panel mount products). Works hands on to identify problems during new product development and/or when quality concerns arise. Effective use of Office365 including Outlook, Excel, PPT, SharePoint, etc. Work effectively with different levels and individuals inside and outside of the organization. “The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities” Required Experience 3 - 5 Year's experience in connector design/manufacturing required. Component, assembly design, and manufacturing experience may be consider in lieu of this. Engineering Design Software: SolidWorks, AutoCAD, etc. Simulation Software: FEA, CFD/Thermal Modeling, etc. is preferred, but not required. Must be able to handle multiple projects simultaneously as priorities can change quickly. Must have excellent communication, collaboration, and organizational skills. Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs. Preferred Education: Bachelor's Degree in Mechanical Engineering, Electrical Engineering, or equivalent is required SAMTEC, Inc. is an Equal Opportunity Employer and committed to creating a diverse environment. All employment decisions at Samtec are based in business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, pregnancy or parental status, age, disability, sexual orientation, gender and/or gender identity/expression, marital status, past or present military service, family medical history or genetic information, or any other status protected by applicable laws. Privacy Policy: *****************************************************

Company: Heritage Civil Works Department: Engineering & R&D Reports to: Lead Systems Engineer Employment Type: Full-Time At Heritage Civil Works, were not just building solutions, were modeling the future. As a global leader in Computational Fluid Dynamics (CFD), physical modeling, and custom test hardware, we serve elite clients in aerospace, biotechnology, pollution control, and power generation. We work on bold problems that require bold talent. And now, were looking to add a Mechanical Design Engineer to our remote team someone who thrives in a high-velocity engineering playground, where innovation is not just expected, but essential. What You'll Be Doing You'll join a remote-first, mission-driven engineering community designing mechanical systems and physical components for complex, high-performance applications. Think next-gen test rigs, flow simulators, precision parts, and hardware that shapes industries. You'll collaborate across disciplines to design, test, and validate systems that may be used in wind tunnels, experimental chambers, or biomedical testing environments. Expect to own full design cycles, and to be part of something bigger our work literally powers and protects lives. Core Responsibilities - Design innovative mechanical systems and components using SolidWorks, AutoCAD, or similar platforms - Participate in brainstorming, whiteboarding, and rapid concept development - Generate 3D models, manufacturing drawings, and design documentation - Collaborate with CFD engineers and R&D teams to align physical models with simulations - Support fabrication teams with DFM (Design for Manufacturability) considerations - Review and iterate on designs based on test feedback and client input - Run FEA and thermal simulations to validate and improve designs - Contribute to a culture of curiosity, knowledge-sharing, and just-get-it-done execution What We are Looking For We're seeking a creative problem solver with a mechanical engineers brain and a makers hands. You're excited to collaborate, share knowledge, and work independently all from your home workspace, coffee shop. Basic Qualifications - BS or AS in Mechanical Engineering, Mechatronics, or a related field - Strong grasp of mechanical systems, design fundamentals, and fabrication principles - Hands-on experience with physical prototyping or fabrication (3D printing, CNC, etc.) - Proficiency in SolidWorks, AutoCAD, or similar CAD software - Clear, professional communication in English (verbal & written) - A passion for tinkering, building, testing, and pushing limits Bonus Skills - CFD background or interest in fluid-related hardware design - Experience working with aerospace, or clean energy systems - Knowledge of additive manufacturing and rapid prototyping methods - Experience designing for dynamic or high-pressure environments - Scripting (Python/Java) for automation of design or testing workflows What Its Like to Work Here Were engineers, scientists, dreamers, and builders. At Heritage Civil Works, you're not in it alone, we believe in radical collaboration, clear communication, and solving problems that matter. Well support your growth, challenge your limits, and celebrate your breakthroughs. This is not a job for the average. Its for someone who says Why not? when others say You cant. Why Join Heritage Civil Works? We Offer: - 100% remote flexibility work from anywhere - Competitive salary + performance-based bonuses - Comprehensive health, dental & vision insurance - 401(k) with company match - Paid training & continuous learning opportunities - Access to prototyping tools and engineering assets - Generous PTO + paid holidays - A voice in shaping game-changing technologies Additional Info - Candidates must be based in the U.S. - Background check will be required - Heritage Civil Works is proud to be an equal opportunity employer - We do not currently sponsor visas for this position Ready to Build Whats Next? If you've got the drive, the tools, and the vision to design the systems that shape tomorrow, we want to hear from you. Apply now, or Visit out Career Page to apply ********************************************************

Job Description Engineer / Product Designer ) About the Opportunity: Our client, a well-established and growing manufacturer of vinyl windows and doors, is seeking an experienced Engineer / Product Designer to join their team. This is a full-time, direct-hire opportunity with a company known for its innovation, quality products, and strong presence in the residential and light commercial construction markets. This role is ideal for a hands-on, technically skilled professional who thrives in a collaborative environment and is passionate about product development and design within a manufacturing setting. Key Responsibilities: Develop and design new vinyl window and door products using 3D CAD tools (SolidWorks, AutoCAD, etc.). Collaborate with production and tooling teams to ensure manufacturability and cost-effectiveness. Maintain accurate and up-to-date technical documentation, drawings, and BOMs. Participate in the testing and certification process, ensuring compliance with AAMA, NFRC, and other relevant industry standards. Improve existing product lines through materials research, component redesign, and process optimization. Work cross-functionally with engineering, operations, and marketing to support product launches and continuous improvement. What We're Looking For: Bachelor's degree in Mechanical Engineering, Product Design, or a related discipline. Minimum of 3 years of experience in product engineering or design, ideally in fenestration, building products, or plastics manufacturing. Strong proficiency in CAD design; SolidWorks and AutoCAD are preferred. Working knowledge of vinyl extrusion, window assembly, and glazing technologies. Familiarity with industry standards and testing requirements (AAMA, ASTM, NFRC). Excellent communication, time management, and problem-solving skills. Bonus Skills: ERP experience (e.g., SAP, Epicor). Knowledge of Lean principles or DFMA (Design for Manufacturing and Assembly). Experience working with suppliers and vendors on custom parts or tooling. Why You Should Apply: Stable, reputable company with a strong growth trajectory Opportunity to have a real impact on product innovation and development Competitive compensation and comprehensive benefits package Supportive team environment and room for advancement Next Steps: If you're an experienced engineer or product designer with a background in windows, doors, or similar building products, we'd love to hear from you. Please send your resume and (if available) a sample portfolio of relevant design work to ******************** or reach out directly for a confidential conversation.

The Role The Manufacturing Engineer is responsible for developing automated solutions, implementing new processes, optimizing existing processes, automated data collection, and executing the industrial control and programming strategy for GTI's production facilities. This position will work closely with the multiple teams to ensure flawless and quick speed to market. Success is gauged on the ability to deliver quality, detailed, and efficient solutions at scale. The Manufacturing Engineer will play a pivotal strategic role in priority projects from a feasibility standpoint through a full IQ, OQ, PQ validation and hand-off with a technical transfer to the site production team. They work collaboratively with multiple teams to deliver productivity improvements and Continuous Improvement. Responsibilities 50% travel required Coordinate the efforts of Engineering and technical resources based on Senior Leadership Priorities and Site 90-day plan priorities. Work with other departments (i.e. Prod Development, Project Management, Quality, Compliance, Operations, etc.) to integrate new systems. Dedicate start-up management support for selected complex project integrations. Ensures constant updates are provided to the VP of Manufacturing on the status of projects and improvement efforts in the facilities. SME for automated packaging equipment, flow wrappers, beverage line, multi-combi scales, bag filling equipment, integrations, and automation. Conduct studies, identify problems, recommend alternatives, and implement solutions in coordination with other teams. Develop and deploy automated solutions for numerous processes to gain efficiency and streamline workflows. Provide support to Start-up facilities via technical transfer: Staffing Equipment layout and requirements Construction hand off Regulatory engagement Best-practice processes Technical transfer related to equipment Work with integrators, contractors, and site personnel to bring new functionality online and to troubleshoot issues as they arise. Work with site maintenance and facilities personnel to develop and execute preventative maintenance plans. Maintain up to date as-built records and drawings for existing and new deployments. Integrate existing equipment with live data stream to dashboard with historian, report generation, alarms, notifications, and live visuals for site teams to track daily production. Other duties as assigned Qualifications Bachelor's degree in engineering and 5+ years Operations and Engineering experience in a manufacturing environment. Proven strategic experience in overseeing all aspects of large-scale manufacturing projects Knowledgeable of TPM-based continuous improvement methodology Knowledgeable of Engineering problem solving Able to diagnose complex technical systems and develop simple human-machine interface and training solutions for optimal operations. Experience in industrial networking/automation (SCADA-Ignition, ITOT, cyber security), controls experience (PLC - AB, Omron, Schneider, ladder logic \ STX), business and data analytics for manufacturing operations (Power Bi, Tableau,) vision systems, and robotics. Highly motivated, self-directed, innovative and able to work independently or among teams with keen judgement, common sense and resourcefulness Adapts and thrives in a demanding, start-up, fast-paced environment Possesses a high level of critical thinking Effective time-management skills and ability to multi-task Ability to work well with others while also completing individually assigned tasks. Operates with a high level of professionalism and integrity, including dealing with confidential information Must understand and comply with the rules, regulations, policies, and procedures of GTI Must have a solid understanding of the Medical Marijuana laws, rules and regulations set forth by the state; a pursuit to further their understanding and knowledge of the industry and the laws. Safety and Compliance Be aware of hazards in the workspace. Retain and understand department specific training. Report safety incidents/ concerns and comply with follow-up actions. Be compliant with area safety requirements, state regulations and PPE requirements. Follow GMP, biosecurity, sanitation or other quality and compliance requirements. Perform record keeping accurately and completely as directed by a lead or supervisor. Maintain and calibrate tools, equipment and machinery as directed by a lead or supervisor. Report and escalate safety & quality concerns. Working Conditions While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions. Must be able to sit and/or stand for extended periods of time while maintaining focus. Must be able to lift, carry, and balance up to 50 pounds (and up to 100 pounds with assistance) AND must be able to do so with extreme care and caution when working with product. Ability to work in a fast-paced, changing, and challenging environment Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil). Additional Requirements Must pass any and all required background checks Must be and remain compliant with all legal or company regulations for working in the industry Must possess valid driver's license Must be a minimum of 21 years of age Must be approved by state badging agency to work in cannabis industry The pay range is competitive and based on experience, qualifications, and/or location of the role. Positions may be eligible for a discretionary annual incentive program driven by organization and individual performance. Green Thumb Pay Range$90,000-$110,000 USD

The Manufacturing Engineer I is responsible for developing, designing, implementing and managing tooling, processes and procedures. This position will train all personnel on improvements or implementation of tooling, processes and procedures. This position is responsible for managing one or more projects that may include large capital expenditures or cost saving initiatives that positively impact safety, maintenance, quality, on time delivery (OTD), efficiency and inventory. The Manufacturing Engineer will support manufacturing for all types of continuous improvement activities and may also participate on or co-lead continuous improvement events. This position will also assist in the execution of Engineered to Order (ETO) sold projects as they are shared between design and manufacturing processes. Essential Job Functions * Design, justify, implement and manage capital projects including machine and fixturing purchases, shop floor layout designs, material handling equipment, product troubleshooting, etc. * Develop training materials and train all personnel on improved or new tooling, machines, processes and procedures. * Create and execute improvements to achieve goals established in Key Performance Indicators (KPIs). * Utilize scorecard performance and key metrics to prioritize efforts on tasks and projects. * Use real-time problem-solving tools to implement root cause solutions surrounding safety, quality, OTD, productivity, efficiency, cost savings, etc. * Support new product development and ETO projects ensuring successful manufacturability. * Implement and maintain 5S and housekeeping efforts throughout manufacturing and in collaboration with direct personnel. * Collaborate with the hourly production coworkers to improve their daily work as needed or required. * Collaborate and build relationship with Planners and Engineering to maintain routers in JDE to support accurate costing and profitability. * Collaborate and build relationships with other professional disciplines throughout the business on technical inquiries and needs. * Collaborate and build relationships with sales and marketing to develop new product offerings in a research and development capacity. * Provide training and guidance to other Manufacturing Engineering Technicians as needed. * Leverage knowledge of Manufacturing Engineer II in regards to design methodology, skills, and tools. * Travel including international, could be up to 15% as required by the project or other needs. * Must have a valid driver's license * Regular, in-person attendance due to necessary teamwork and personal interactive nature of this position * The ability to work in a constant state of alertness and safe manner. Knowledge, Skills, Abilities (Competencies) * Metal forming, welding, grinding, machining, manufacturing, including general CAM and/or layout experience. * Must have a thorough understanding of drafting and knowledge of engineering principals and techniques including various sheet metal fabrication processes and installation procedures * Knowledge of Lean manufacturing knowledge or related concepts. * Ability to work well under pressure and manage time effectively in a constantly changing and time sensitive environment while prioritizing multiple tasks in parallel. * Excellent communication skills both orally and written with keen attention to detail. * Ability to take initiative to develop new strategies and outside-the-box ideas. * Self-starter and goal oriented who will aggressively pursue successful resolution of safety risks in a timely manner. * Ability to work independently or collaboratively with a team. * Ability to establish and maintain working relationships with individuals at all levels of the organization. * Strong interpersonal skills with a mechanical aptitude. * Ability to efficiently utilize Microsoft Office. AutoCAD experience required. Education and Experience * Bachelor of Science in Engineering or similar degree program is required. One (1) to three (3) years related experience preferred. Base Compensation Range: $59,159 - $88,739 annually Variable Compensation Range: Incentive bonus eligibility up to 10% of gross annual salary base on company performance (as of 2024). Health and Ancillary Benefit Overview: * Medical, Dental & Vision Insurance with low employee premiums * Free off-site medical clinic * Company paid Life Insurance & Short-Term Disability * 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more * Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades * Paid Time Off and Sick, Family & Parental Paid Time Off * Ten (10) Paid Holidays * Four-day work weeks, varied shifts, and flexible remote work options depending on position * Career progression program for advancement * Free in-house welding, grinding & machine operation school * In-house training program Professional office environment with some time spent in a manufacturing shop. Use of standard office equipment (computers, phones, copiers, and filing cabinets, etc.). Frequent presence on the manufacturing floor as well as field operations. Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures.

Acute Care Technology The Operations group is offering a Co-op opportunity, in which the student will report to Manufacturing Engineering Department and work cross functionally with various operations personnel on a variety of projects. Must be enrolled in an undergrad or graduate degree program. NOTE: This is a college Co-op position - applicants must be enrolled in a degree program at the start of the Co-op. The Co-op will be from January 2026 thru August 2026. Skills Requirements: * Willing to work for cross functional teams (Electrical, Mechanical, Industrial and Quality engineering). * Design parts, assemblies, and fixtures using 3D CAD (SolidWorks) * The desire and ability to learn and apply Lean/6Sigma techniques to steer improvements to quality, cost and delivery * Good interpersonal skills and well organized * Excellent written and verbal communication skills * Demonstrated ability to understand, analyze and assess a wide variety of business and/or product concerns and determine logical actions * Able to organize and present ideas in a convincing and compelling manner * Contribute effectively to building and sustaining a collaborative environment, promoting commitment to achieve business goals * Experience in Microsoft Word, Excel, and PowerPoint is essential * Ability to work independently as well as take direction and complete tasks with or without help or supervision. * Experience in creating engineering changes and validation activities a plus. Required/Preferred Education and Experience: * In pursuit of Bachelor's degree in Mechanical, Industrial, Manufacturing, Electrical Engineering or similar * Minimum completion of first year with a minimum of 2.5 GPA. * Direct experience in manufacturing or production environment a plus. * Authorized to work in U.S. ZOLL Medical Corporation appreciates and values diversity. We are an Equal Opportunity Employer M/F/D/V. ADA: The employer will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990 The hourly pay rate for this position is: $20.10 to $25.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran.

Responsibilities: Ability to identify Manufacturing Process Constraints Design and implement Manufacturing Process Improvements Verify BOM accuracy Identify and implement Methods improvements Document and preparation of work instructions Identify and select Manufacturing Capital Equipment and prepare necessary appropriations requests Compare forecasts against Machine and Process capacities and implement improvement plans Time standard development, establishing unique routing for special products, advising Product Engineering on product development and design, and participating in appropriate cross-functional programs and projects Requirements: BSME/IE/Business Operations Management and 0-3 years professional Manufacturing experience; or a 2-year technical degree and 3-5 years professional Manufacturing experience; or a High School Diploma and 5+ years professional Manufacturing experience MRP Proficiency required Preferred Qualifications: Understand and apply Methods Analysis Mechanical aptitude and knowledge of Products and Processes Design tooling and manufacturing fixtures PC Proficient EDUCATION AND CERTIFICATIONS BSME/IE/Business Operations Management and 0-3 year(s) professional Manufacturing experience; or a 2-year technical degree and 3-5 years professional Manufacturing experience; or a High School Diploma and 5+ years professional Manufacturing experience PHYSICAL REQUIREMENTS No Special Physical Requirements ENVIRONMENTAL DEMANDS N/A TRAVEL TIME REQUIRED N/A OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Promote Transparent & Open Communication At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

Collabera is ranked amongst the top 10 Information Technology (IT) staffing firms in the U.S., with more than $525 million in sales revenue and a global presence that represents approximately 12,000+ professionals across North America (U.S., Canada), Asia Pacific (India, Philippines, Singapore, Malaysia), and Europe (Ireland, Netherlands, Poland, United Kingdom). We support our clients with a strong recruitment model and a sincere commitment to their success, which is why more than 75% of our clients rank us amongst their top three staffing suppliers. Not only are we committed to meeting and exceeding our customer's needs, but also are committed to our employees' satisfaction as well. We believe our employees are the cornerstone of our success and we make every effort to ensure their satisfaction throughout their tenure with Collabera. As a result of these efforts, we have been recognized by Staffing Industry Analysts (SIA) as the “Best Staffing Firm to Work For” for five consecutive years since 2012. Collabera has over 50 offices across the globe with a presence in ten countries and provides staff augmentation, managed services and direct placement services to global 2000 corporations. For consultants and employees, Collabera offers an enriching experience that promotes career growth and lifelong learning. Visit ***************** to learn more about our latest job openings. Awards and Recognition --Staffing Industry Analysts: Best Staffing Firm to Work For (2016, 2015, 2014, 2013, 2012) --Staffing Industry Analysts: Largest U.S. Staffing Firms (2016, 2015, 2014, 2013) --Staffing Industry Analysts: Largest Minority Owned IT Staffing Firm in the US. Job Description A Fortune 500 aerospace and manufacturing giant looking for Project Engineer who will be responsible for the completion of short- and medium-term engineering projects and performs engineering design evaluations working to complete projects within budget and scheduling constraints. Position Responsibilities: · Create/revise component and assembly drawings in SolidWorks to support current products and new developments. · Work within ERP system to create and maintain component items and BOM structure for complex, highly configurable assemblies. · Design/build/monitor prototype and test units, analyze data to determine if design meets function and performance specifications. Qualifications Experience Requirements: · 4 year engineering degree · Minimum 2- 6 years experience · Strong Mechanical Aptitude · Strong SolidWorks skills, 2 years minimum · Worked within ERP system · Sheet metal design preferred Additional Information If you want to know more and apply, please connect with: Niraj Singh **************************** ************ ***********************************************

The Safety Management Systems (SMS), Global Standardization team is responsible for providing guidance and expertise to the business regarding the four ICAO components of SMS. This role will be based within the Safety Assurance pillar and will work very closely with the Risk Management, Policy and Promotion teams. Our primary responsibility is to support the entire business in its SMS maturity journey. As such, the successful candidate shall be required to build trust and relationships, learn and develop best practice, be open to feedback, plan and execute to our commitments. This role required high-levels of autonomy but will be guided by more experienced team members and will be provided with training. The job requires the modification of existing procedures and practices to ensure that the end results meet regulation and provide the best practice to our internal customers. Projects will be delivered in line with GE Aerospace operating model FLIGHT DECK using methods such as problem solving, action planning and bowler metric reporting. **Job Description** **Roles and Responsibilities** + Responsible for understanding SMS theory, regulation and industry best practice - enabling the design, develop and implementation of SMS standard work methodologies and techniques. + Able to identify potential product safety hazards and strategies to mitigate risks that are present within the product design, production and overhaul, to an acceptable level. Utilizing human factors principles to drive design and process improvements in order to eliminate human error in the operation and maintenance of the product in the field + Requires specialized knowledge within the SMS discipline and the ability to influence the development of strategy for their area of responsibility, including interfacing resources and policies. + Interprets complex internal and external business challenges and recommends best practice to improve products, processes or services. Stays informed of industry trends that may inform work. + Uses high level of judgment to make decisions and handle complex tasks or problems in areas of operational, product management, manufacturing, technology or engineering. Has ability to assess quality of information given and ask pertinent questions to stakeholders. Solution focussed - able to offer new solutions to problems outside of set parameters and is able to construct and provide recommendations. + Able to use and analyze multiple internal and external data sources, to detect trends, tell the story and provide recommendations to reduce risk. + Will lead cross functional teams or and complex projects. + Shall communicate difficult concepts, influence others' options on particular topics and may guide others to consider a different point of view. + Travel will be required to go Gemba at our internal, Customer and supplier locations - approximately 15% of time. **Required Qualifications** + Bachelor's degree in engineering from an accredited university or college + Minimum of 3 years' experience with SMS principles, Quality, Engineering, Aerospace Design, Production, Overhaul & Product Safety + Fluency in the English language **Desired Characteristics** + Master's degree in engineering from an accredited university or college + Strong oral and written communication skills. + Strong interpersonal and leadership skills. + Demonstrable ability to analyze vast quantities of data. + Solution oriented mindsight. + Ability to resolve complex problems where the solution may not be clear at the start of the project. + Demonstrated ability to lead complex programs/projects. + Ability to document, plan, and execute programs in line with commitments. + Established project management skills. Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward. \#LI-JR1 GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.